Items where Subject is "T Technology (General)"

Blunt, Liam and Jiang, Xiang, eds. (2003) Advanced techniques for assessment surface topography: Development of a Basis for 3D Surface Texture Standards "Surfstand". Butterworth-Heinemann. ISBN 978-1-903996-11-9,

Haigh, Richard and Amaratunga, Dilanthi, eds. (2008) Building resilience, book of executive summaries. School of the Built Environment, University of Salford, UK, University of Salford. ISBN 978‐1‐905732‐39‐5

Ford, Derek G., ed. (2003) Laser metrology and machine performance VI. WIT Press, Southampton. ISBN 9781853129902

Keraminiyage, Kaushal, Jayasena, S., Amaratunga, Dilanthi and Haigh, Richard, eds. (2008) Post disaster recovery challenges in Sri Lanka. School of the Built Environment, University of Salford, School of the Built Environment, University of Salford, UK. ISBN 978-1-905732-58-6

Barsky, Noah P., Clements, Mike, Ravn, Jakob and Smith, Kelly, eds. (2008) The Power of Technology for Learning. Advances in Business Education and Training, 1 . Springer. ISBN 9781402087462

Arabnia, Hamid R., Arreymbi, Johnnes, Clincy, Victor A., Droegehorn, Olaf, Lu, Joan, Solo, Ashu M. G., Ware, J. Andrew and Zabir, Salim, eds. (2006) Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP'06. CSREA Press, USA. ISBN 1-60132-005-1

Barboutis, Christos and Klontzas, Michael, eds. (2001) The Sound Barrier: Dynamics of Greek Radio Broadcasting. Papazisis, Athens, Greece, pp. 307-369. ISBN 960021266X

Jiang, Xiang, Mathieu, Luc and Weckenmann, Albert, eds. (2013) The Twelfth CIRP Conference on Computer Aided Tolerancing. Procedia CIRP, 10 . Elsevier B.V.. ISBN 9781629935973

A-Yarubi, Qahtan and Lucas, Gary (2009) Measurement of the Film Thickness, Film Velocity and Entrainment Fraction in a Liquid-Air Annular Flow Using a Conductance Flowmeter. In: Conference of the International Journal of Arts & Sciences, 23-26 February 2009, Malta.

AL-Majali, Faris and Prigmore, Martyn (2010) Consumers channel choice behavior in multi-channel environments: what are the influences on consumers to choose the online distribution channels over other alternative offline channels. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 98-104. ISBN 9781862180932

Abdalla, Gaballa, Ball, Andrew and Gu, Fengshou (2013) Fault Detection and Diagnosis of Ball Bearing Using Advanced Vibration Analysis Techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 224. ISBN 9781862181212

Abdalla, Gaballa M. A. (2017) Planetary gearbox condition monitoring based on modulation analysis. Doctoral thesis, University of Huddersfield.

Abdeljaber, Fadi (2022) A Machine Learning Architecture to detect Alzheimer’s Disease Progression based on the Evaluation of Cognitive and Functional Attributes of Neuropsychological Assessments. Doctoral thesis, University of Huddersfield.

Abdul-Rahman, Hussein S., Arevalillo-Herráez, Miguel, Gdeisat, Munther, Burton, David, Lalor, Michael, Lilley, Francis, Moore, Christopher, Sheltraw, Daniel and Qudeisat, Mohammed (2009) Robust three-dimensional best-path phase-unwrapping algorithm that avoids singularity loops. Applied Optics, 48 (23). pp. 4582-4596. ISSN 0003-6935

Abdul-Rahman, Hussein S., Gdeisat, Munther A., Burton, David R., Lalor, Michael J., Lilley, Francis and Abid, Abdulbasit (2008) Three-dimensional Fourier Fringe Analysis. Optics and Lasers in Engineering, 46 (6). pp. 446-455. ISSN 01438166

Abdul-Rahman, Hussein S., Gdeisat, Munther A., Burton, David R., Lalor, Michael J., Lilley, Francis and Moore, Christopher J. (2007) Fast and robust three-dimensional best path phase unwrapping algorithm. Applied Optics, 46 (26). pp. 6623-6635. ISSN 0003-6935

Abdul-Rahman, Hussein S., Jiang, Xiangqian and Scott, Paul J. (2012) Freeform surface filtering using the lifting wavelet transform. Precision Engineering, 37 (1). pp. 187-202. ISSN 01416359

Abdul-Rahman, Hussein S., Lou, Shan, Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2016) Freeform texture representation and characterisation based on triangular mesh projection techniques. Measurement, 92. pp. 172-182. ISSN 0263-2241

Abdullah, Fazil, Ward, Rupert and Ahmed, Ejaz (2016) Investigating the influence of the most commonly used external variables of TAM on students' Perceived Ease of Use (PEOU) and Perceived Usefulness (PU) of e-portfolios. Computers in Human Behavior, 63. pp. 75-90. ISSN 0747-5632

Abdullah, Fazil, Ward, Rupert, Catterall, Stephen, Hill, Pat and Wilson, David (2013) An investigation of the factors that influence engagement with CPD within e-portfolios used for accredited Higher Education course. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 80-86. ISBN 9781862181212

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2010) Learning and Teaching Mechanical Engineering Courses with Blended Learning Environment - Higher Order Application of Bloom’s Taxonomy. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 84-91. ISBN 9781862180932

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2009) Teacher Attitudes toward and Perceptions of Mechanical Engineering Student Performance on CAD/CAM/CNC. In: Learning: the sixteenth international conference on Learning, 1-4 July 2009, University of Barcelona, Spain. (Unpublished)

Abdulshahed, Ali (2015) The Application of ANN and ANFIS Prediction Models for Thermal Error Compensation on CNC Machine Tools. Doctoral thesis, University of Huddersfield.

Abdulshahed, Ali, Longstaff, Andrew P. and Fletcher, Simon (2015) The application of ANFIS prediction models for thermal error compensation on CNC machine tools. Applied Soft Computing, 27. pp. 158-168. ISSN 1568-4946

Abdulshahed, Ali, Longstaff, Andrew P. and Fletcher, Simon (2017) A cuckoo search optimisation-based Grey prediction model for thermal error compensation on CNC machine tools. Grey Systems: Theory and Application, 7 (2). pp. 146-155. ISSN 2043-9377

Abdulshahed, Ali, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2015) Thermal error modelling of machine tools based on ANFIS with fuzzy c-means clustering using a thermal imaging camera. Applied Mathematical Modelling, 39 (7). pp. 1837-1852. ISSN 0307-904X

Abdulwahab, Abubaker (2018) Investigations on the Roll Stability of a Semitrailer Vehicle Subjected to Gusty Crosswind Aerodynamic Forces. Doctoral thesis, University of Huddersfield.

Abdusamad, Ayad (2013) Mapping Extensible Mark-up Language (XML) Documents into Rational DataBase Management System (RDBMS) for Condition Monitoring (CM). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 225. ISBN 9781862181212

Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2009) Bearing fault diagnosis based on vibration signals. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 93-98. ISBN 9781862180857

Aboaisha, Hosain (2015) The Optimisation of Elementary and Integrative Content-Based Image Retrieval Techniques. Doctoral thesis, University of Huddersfield.

Aboaisha, Hosain, Xu, Zhijie and El-Feghi, Idris (2010) Fuzzy Fusion of Colour and Shape Features for Efficient Image Retrieval. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 31-36. ISBN 9781862180932

Abobghala, Abdelmenem, Pislaru, Crinela and Iwnicki, S. (2013) Optimising the energy efficiency of rail vehicles by a novel application of integrated active control method for vehicle traction and steering systems. In: Next Generation Rail 2013, 15 - 16 July 2013, The Crystal, London.

Aboufares, Ghada (2015) Performance Characteristics of a Vertical Axis Wind Turbine Operating in Different Environmental Conditions. Masters thesis, University of Huddersfield.

Abu Saad, Samieh (2015) The Untilisation of Information Available in a Sensorless Control System of an AC Induction Motor for Condition Monitoring. Doctoral thesis, University of Huddersfield.

Abuaniza, Ayman (2015) Thermal parameter optimisation for accurate finite element based on simulation of machine tools. Doctoral thesis, University of Huddersfield.

Abuaniza, Ayman, Fletcher, Simon and Longstaff, Andrew P. (2013) Thermal error modelling of a three axes vertical milling machine using Finite element analysis (FEA). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 87-92. ISBN 9781862181212

Abubaker, Azza (2013) Factors Influence Reading From Screen of Arabic Textbook for Learning by Children Aged 9 to 13. Doctoral thesis, University of Huddersfield.

Abubaker, Azza, Lu, Joan and Yip, Yau Jim (2008) Framework to design new model of E-journals. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 93-99. ISBN 978-1-86218-067-3

Aburass, Ali, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) Combustion Diagnostics of a Diesel Engine with Biodiesel Fuels based on Vibro-acoustics and In-Cylinder Pressure Measurements. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 13-18. ISBN 9781862181212

Abusaad, Samieh, Benghozzi, Ahmed, Shao, Yimin, Gu, Fengshou and Ball, Andrew (2013) Utilizing Data from a Sensorless AC Variable Speed Drive for Detecting Mechanical Misalignments. Key Engineering Materials, 569. pp. 465-472. ISSN 1013-9826

Adesta, Erry Yulian Triblas (2002) A reference model for extended extended enterprise. Doctoral thesis, University of Huddersfield.

Adesta, Erry Yulian Triblas, Kelly, P.F. and Little, David (2004) A reference model for extended enterprise. In: 3rd International Conference on Advanced Manufacturing Technology (ICAMT 2004), 11 - 13 May 2004, Pan Pacific Hotel, Kuala Lumpur. (Unpublished)

Agurto Goya, Alan (2009) New Proposal for the Detection of Concealed Weapons: Electromagnetic Weapon Detection for Open Areas. Masters thesis, University of Huddersfield.

Agurto Goya, Alan and Sibley, Martin J.N. (2007) New proposal for the detection of concealed weapons. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-8.

Ahmad, Zibrij (2019) An Empirical Investigation into Innovation in the UK Rail Industry. Doctoral thesis, University of Huddersfield.

Ahmaida, Anwar, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) Fatigue Prediction of a Gear Transmission System based on Vibro-Acoustic Measurements. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 93-99. ISBN 9781862181212

Ahmaida, Anwar M. (2018) Condition Monitoring and Fault Diagnosis of a Multi-Stage Gear Transmission Using Vibro-acoustic Signals. Doctoral thesis, University of Huddersfield.

Ahmed, Ejaz and Ward, Rupert (2016) Analysis of factors influencing acceptance of personal, academic and professional development e-portfolios. Computers in Human Behavior, 63. pp. 152-161. ISSN 0747-5632

Ahmed, Ejaz and Ward, Rupert (2015) Development of an instrument to measure students’ acceptance of technologically-enhanced personal, academic and professional development portfolios. In: INTED2015 Proceedings. 9th International Technology, Education and Development Conference Madrid, Spain. 2-4 March, 2015. IATED, pp. 2255-2265. ISBN 978-84-606-5763-7

Ahmed, Ejaz and Ward, Rupert (2016) A comparison of competing technology acceptance models to explore personal, academic and professional portfolio acceptance behaviour. Journal of Computers in Education. ISSN 2197-9995

Ahmed, Ejaz, Ward, Rupert, White, Stephen and Jabbar, Abdul (2011) Use of Emerging Mobile Technologies in Portfolio Development. In: MOBILITY 2011: The First International Conference on Mobile Services, Resources, and Users. IARIA, Barcelona, Spain, pp. 81-85. ISBN 978-1-61208-164-9

Ahmed, M., Gu, Fengshou and Ball, Andrew (2012) Fault Detection and Diagnosis using Principal Component Analysis of Vibration Data from a Reciprocating Compressor. In: 18th International Conference On Automation And Computing (ICAC), 2012. IEEE, Cardiff, UK, pp. 461-466. ISBN 978-1-4673-1559-3

Ahmed, Mahmud and Gu, Fengshou (2010) Fault classification using an Artificial Neural Network based on Vibrations from a Reciprocating Compressor. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 92-97. ISBN 9781862180932

Ahmed, Mahmud, Gu, Fengshou and Ball, Andrew (2011) Feature Selection and Fault Classification of Reciprocating Compressors using a Genetic Algorithm and a Probabilistic Neural Network. Journal of Physics: Conference Series, 305 (1). 012112. ISSN 1742-6596

Ahmed, Noukhez (2018) Performance Evaluation and Optimisation of Vaneless Diffuser Of Various Shapes for a Centrifugal Compressor. Doctoral thesis, University of Huddersfield.

Aitchison, Michael (2011) The thermionic valve and its uses for low powered guitar amplification. Masters thesis, University of Huddersfield.

Aitchison, Michael and Fenton, Steven (2010) Can Transistors Sound like Valves? In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 20-26. ISBN 9781862180932

Akser, Murat, Bridges, Brian, Campo, Giuliano, Cheddad, Abbas, Curran, Kevin, Fitzpatrick, Lisa, Hamilton, Linley, Harding, John, Leath, Ted, Lunney, Tom, Lyons, Frank, Ma, Minhua, Macrae, John, Maguire, Tom, McCaughey, Aiden, McClory, Eileen, McCollum, Victoria, McKevitt, Paul, Melvin, Adam, Moore, Paul, Mulholland, Eleanor, Muñoz, Karla, O'Hanlon, Greg and Roman, Laurence (2017) SceneMaker: Creative Technology for Digital StoryTelling. In: Proceedings of the 5th EAI International Conference: ArtsIT, Interactivity & Game Creation. Springer, pp. 29-38. ISBN 9783319558332

Al, McNichol (2009) Music Technology in the Key Stage 3 Music: an opportunity for creativty? In: University of Huddersfield Research Festival 2008, 25 Feb-13 March 2008, Huddersfield. (Unpublished)

Al Sharji, Yahya, Elbeltagi, Ibrahim, Hardaker, Glenn and Elsetouhi, Ahmed (2013) The Role of Owner-Manager in SMEs for the Adoption of Information and Communication Technology in United Arab Emirates. Journal of Global Information Management, 21 (2). pp. 23-50. ISSN 1062-7375

Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2011) Monitoring Cavitation in Centrifugal Pumps using a Noninvasive Capacitance Sensor. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 875-883. ISBN 0954130723

Al-Ani, Mahir (2016) Integrated electrical machine-compressor. In: Turbo Expo: Turbomachinery Technical Conference & Exposition, June 26 - 30, 2017, Charlotte Convention Center, Charlotte, NC USA. (Submitted)

Al-Arbi, Salem, Gu, Fengshou, Guan, Luyang and Ball, Andrew (2009) Remotely gear condition monitoring using traditional signal processing techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 111-117. ISBN 9781862180857

Al-Dadah, R.K., Jackson, G. and Rezk, Ahmed (2011) Solar powered vapor absorption system using propane and alkylated benzene AB300 oil. Applied Thermal Engineering, 31 (11-12). pp. 1936-1942. ISSN 1359-4311

Al-Dahash, Hajer, Kulatunga, Udayangani and Amaratunga, Dilanthi (2014) Evaluation of the System of Disaster Management Resulting from War Operations and Terrorism in Iraq. Procedia Economics and Finance, 18. pp. 900-907. ISSN 2212-5671

Al-Hamadani, Baydaa T., Alwan, Raad F., Lu, Joan and Yip, Yau Jim (2009) Vague Content and Structure (VCAS) Retrieval for XML Electronic Healthcare Records (EHR). In: ICOMP'09 International Conference of Internet Computing, 13th - 16th July 2009, Las Vegas, Nevada, USA. (Unpublished)

Al-Hashmi, S., Gu, Fengshou, Li, Y., Ball, Andrew, Fen, Tao and Lui, Ke (2004) Cavitation Detection of a Centrifugal Pump Using Instantanous Angular Speed. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

Al-Hinai, Sulaiyam (2010) Non-invasive velocity and volume fraction profile measurement in multiphase flows. Doctoral thesis, University of Huddersfield.

Al-Hinai, Sulaiyam and Lucas, Gary (2008) A flowmeter for measuring the dispersed phase velocity in multiphase flow with non-uniform velocity profiles. In: 3rd International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics (ISEM2008), 7-10 December 2008, Tainan, Taiwan.

Al-Hinai, Sulaiyam and Lucas, Gary (2008) A flowmeter for measuring the dispersed phase velocity in multiphase flow with non-uniform velocity profiles. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 55-62. ISBN 978-1-86218-067-3

Al-Jody, Taha (2021) Bearicade: A Novel High-Performance Computing User and Security Management System Augmented with Machine Learning Technology. Doctoral thesis, University of Huddersfield.

Al-Nedawe, Basman, Buhafa, Adel M, Sibley, Martin J.N. and Mather, Peter (2013) Optimum reed solomon code using with dicode pulse position modulation system. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 25-30. ISBN 9781862181212

Al-Nedawe, Basman, Sibley, Martin J.N. and Mather, Peter (2010) Microelectronic implementation of error correcting codes for dicode pulse position modulation. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 184. ISBN 9781862180932

Al-Nedawe, Basman M. (2014) Microelectronic Implementation of Dicode PPM System Employing RS Codes. Doctoral thesis, University of Huddersfield.

Al-Nedawe, Basman M., Buhafa, Adel M., Sibley, Martin J.N. and Mather, Peter (2013) Improving error performance of dicode pulse position modulation system using forward error correction codes. In: 2013 21st Telecommunications Forum Telfor (TELFOR 2013), 26th - 28th November 2013, Belgrade, Serbia.

Al-Obaidi, Ahmed (2018) Experimental and Numerical Investigations on the Cavitation Phenomenon in a Centrifugal Pump. Doctoral thesis, University of Huddersfield.

Al-Rajab, Murad and Lu, Joan (2012) Bioinformatics: an overview for cancer research. In: The 2012 World Congress in Computer Science, Computer Engineering & Applied Computing, July 16-19, 2012, Las Vegas, Nevada, USA.

Al-Yarubi, O.S. and Lucas, Gary (2009) Phase Flow Rate Measurements of Annual Flows. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Al-Yarubi, Qahtan (2010) Phase flow rate measurements of annular flows. Doctoral thesis, University of Huddersfield.

Al-Yarubi, Qahtan and Lucas, Gary (2008) Measurement of the film thickness, film velocity and entrainment fraction in a liquid-air annular flow using a conductance flowmeter. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 63-68. ISBN 978-1-86218-067-3

AlSehaimi, Abdullah O., Tzortzopoulos, Patricia and Koskela, Lauri (2009) Last Planner System: Experiences From Pilot Implementation in the Middle East. In: 17th Annual Conference of the International Group for Lean Construction IGLC 17, 15-17th July 2009, Taipei, Taiwan. (Unpublished)

Alaaeddine, Rima and Wu, Song (2017) Application of supervised learning methods to better predict building energy performance. In: International Conference on Sustainable Futures 2017, 26th-27th November 2017, Sitra, Bahrain.

Alabed, Asmaa (2011) Knowledge Management for Grinding Technology. Doctoral thesis, University of Huddersfield.

Alabed, Asmaa and Chen, Xun (2009) Development of a knowledge warehouse for grinding. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 99-104. ISBN 9781862180857

Alabed, Asmaa and Chen, Xun (2008) Grinding knowledge sharing through a knowledge warehouse development. In: 6th International Conference on Manufacturing Research (ICMR 2008), 9th - 11th September 2008, Brunel University, London, UK. (Unpublished)

Alabed, Asmaa and Chen, Xun (2009) Web-Based Knowledge Warehouse Development 2. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Alabied, Samir (2020) Enhancement of Condition Monitoring Information from the Control Data of Electrical Motors Based on Machine Learning Techniques. Doctoral thesis, University of Huddersfield.

Alaiwi, A, Sibley, Martin J.N., Mather, Peter and Holmes, Violeta (2009) Extremely low frequency based communication link. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 105-110. ISBN 9781862180857

Albarbar, A., Gennish, R., Gu, Fengshou and Ball, Andrew (2004) Lubricating Oil Condition Monitoring Using Vibration and Air-Borne Acoustic Measurements. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

Alboul, Lyuba, Abdul-Rahman, Hussein S., Haynes, Paul S., Penders, Jacques and Tharin, Julien (2010) An Approach to Multi-robot Site Exploration Based on Principles of Self-organisation. Lecture Notes in Computer Science, 6425. pp. 717-729. ISSN 0302-9743

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter and Myers, Alan (2007) A high accuracy ultrasound distance measurement system using binary frequency shift-keyed signal and phase detection. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Pislaru, Crinela, Myers, Alan and Briggs, Jack (2009) A high accuracy ultrasonic system for measurement of air temperature. In: Proceedings of the 9th International Conference - San Sebastian, Spain, 2009. EUSPEN, pp. 134-137. ISBN 978-0-9553082-6-0

Aldawi, Fouad Juma (2009) A low-cost ultrasonic 3D measurement device for calibration of Cartesian and non-Cartesian machines. Doctoral thesis, University of Huddersfield.

Alder, C., Mee, I.Che, Glover, Ian and Heathman, A.C. (1990) User interfaces to two electrical laboratory simulation programs: An evaluation. Computers and Education, 15 (1-3). pp. 151-157. ISSN 0360-1315

Ale, Ben, Hanea, Daniela, Van Gulijk, Coen, Lin, Pei-Hui and Hudson, Patrick (2011) Towards an integrated risk model for hydrocarbon industry operation. In: Advances in Safety, Reliability and Risk Management. CRC Press, pp. 1636-1643. ISBN 9780203135105

Ale, Ben, Van Gulijk, Coen, Sillem, Simone and Lin, C. (2011) Administrative and disaster risk assessment framework. NVBR. ISBN 9789056382452

Alegeh, Nurudeen Eshiemoghie (2021) Condition Monitoring of Machine Tool Ball Screw Feed Drives Through Signal Analysis and Artificial Intelligence. Doctoral thesis, University of Huddersfield.

Alexander, Adam Luke (2016) The commercial functions of a trade mark, unconventional trade marks and modern technology. Fields: journal of Huddersfield student research, 2 (1). e20. ISSN 2057-0163

Algadi, Abdualmagid (2017) Computational Fluid Dynamics (CFD) Based Investigations on the Flow of Capsules in Vertical Hydraulic Pipelines. Doctoral thesis, University of Huddersfield.

Alghadhi, Mostafa (2015) Validation of Vehicle Fuel Consumption. Doctoral thesis, University of Huddersfield.

Alghadhi, Mosttafa, Ball, Andrew, Gu, Fengshou and Cattley, Robert (2013) Standard drive cycle recreation from general driving behaviour. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 100-105. ISBN 9781862181212

Ali, Maythem and Lucas, Gary (2013) Optimisation of an Analogue Signal Conditioning Circuit for a Novel Imaging Electromagnetic Flow meter. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 227. ISBN 9781862181212

Ali, Abduladim (2017) Investigate Multilingual Mobile Learning Applications. Doctoral thesis, University of Huddersfield.

Ali, Ahmed (2021) Axial Clamping Behaviour of V-band clamps at Ambient and High temperature. Doctoral thesis, University of Huddersfield.

Ali, Azra N. (2007) Exploring semantic cueing effects using McGurk fusion. In: Auditory-Visual Speech Processing 2007 (AVSP2007), August 31 - September 3, 2007, Kasteel Groenendaal, Hilvarenbeek, The Netherlands.

Ali, Azra N., Hassan-Haj, Ashraf, Ingleby, Michael and Idrissi, Ali (2005) McGurk fusion effects in Arabic words. Proceedings of the Auditory-Visual speech Processing 2005. pp. 11-16.

Ali, Azra N. and Ingleby, Michael (2002) Perception difficulties and errors in multimodal speech: the case of vowels. In: 9th Australian International Conference on Speech Science and Technology, December 2002, Melbourne, Australia. (Unpublished)

Ali, Azra N. and Ingleby, Michael (2005) Probing the syllabic structure of words using the audio-visual McGurk effect. In: 27th Annual Conference of the Cognitive Science Society, 21st-23rd July 2005, Stresa, Italy. (Unpublished)

Ali, Azra N. and Marsden, Philip H. (2003) Affective multi-modal interfaces: the case of McGurk effect. Proceedings of the 8th international conference on Intelligent user interfaces. pp. 224-226.

Ali, Jafar (2011) Modelling of thermal plume dishcarge into shallow and still water. Doctoral thesis, University of Hudderfield.

Ali, Jafar, Fieldhouse, John D., Talbot, Chris J. and Mishra, Rakesh (2009) The diffusion of thermal discharge into stagnant water. In: Sixth international conference on flow dynamics, 4-6 November 2009, Sendai, Japan. (Unpublished)

Ali, Maythem (2016) Development of an Electromagnetic Induction Method For Non-Invasive Blood Flow Measurement. Doctoral thesis, University of Huddersfield.

Ali, Maythem and Lucas, Gary (2013) Optimisation of an Analogue Signal Conditioning Circuit for a Novel Imaging Electromagnetic Flow meter. In: 7th World Congress on Industrial Process Tomography. WCIPT7 . International Society for Industrial Process Tomography, Krakow, Poland, pp. 238-245. ISBN 978 0 853 16323 7

Ali Klaib, Alhadi (2018) Clustering-based Labelling Scheme - A Hybrid Approach for Efficient Querying and Updating XML Documents. Doctoral thesis, University of Huddersfield.

Alitto, AR, Gatta, R, Vanneste, BGL, Vallati, Mauro, Meldolesi, E, Damiani, A, Lanzotti, V, Mattiucci, GC, Frascino, V, Masciocchi, C, Catucci, F, Dekker, A, Lambin, P, Valentini, V and Mantini, G (2017) PRODIGE: PRediction models in prOstate cancer for personalized meDIcine challenGE. Future Oncology, 13 (24). ISSN 1479-6694

Aliwan, Mustafa (2016) Exploration of a Condition Monitoring System for Rolling Bearing Based on a Wireless Sensor Network. Doctoral thesis, University of Huddersfield.

Allali, B., Keraminiyage, Kaushal and Kulatunga, Udayangani (2013) The Role of Organizational Culture in Managing the Knowledge in the Information Communication Technology Small Firms in Libya. In: International Post Graduate Research Conference: IPGRC 2013, 8th-10th April 2013, Salford, UK.

Allali, B., Kulatunga, Udayangani and Keraminiyage, Kaushal (2014) The Relationship between Knowledge Sharing and Organizational Culture: Theoretical Framework. The Built and Human Environment Review, 7 (1). ISSN 1759-0574

Allen, Charlotte E. (2016) A systematic study of the corrosion layers on excavated coins from varying historical periods. Masters thesis, University of Huddersfield.

Allen, Claire and Evans, Claire (2014) The impact of digital technology on design students; the changing learning journey and the emergence of a learner interface. In: altc2014: Riding Giants: How to innovate and educate ahead of the wave, 1st September 2014, University of Warwick, UK.

Allen, Gary and Ghareb, Mazen (2015) Identifying Similar Pattern of Potential Aspect Oriented Functionalities in Software Development Life Cycle. Journal of Theoretical and Applied Information Technology, 80 (3). pp. 491-499. ISSN 1992-8645

Allport, John and Day, A. J. (1996) Statistical Mechanics Material Model for the Constitutive Modelling of Elastomeric Compounds. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 210 (6). pp. 575-585. ISSN 0954-4062

Allport, John and Jupp, Martyn (2012) Turbocharger blade vibration: Measurement and validation through laser tip-timing. In: 10th International Conference on Turbochargers and Turbocharging. Elsevier, London, UK, pp. 173-181. ISBN 978-0-85709-209-0

Allport, John, Unver, Ertu, Rezk, Ahmed and Khodabakhshi, Goodarz (2017) Graphene Enhanced Adsorption Desalination System. In: Materials Forum, July 6th, 2017, BLG10, University of Huddersfield. (Unpublished)

Alqatawneh, Ibrahim (2021) Automatic Data Processing Framework Based Deep Neural Network for Condition Monitoring. Doctoral thesis, University of Huddersfield.

Alqatawneh, Omayma (2021) Design Fiction as an Approach to Stimulate the Adoption of Self-Driving Cars. Doctoral thesis, University of Huddersfield.

Alsboui, Tariq (2022) Enabling Distributed Intelligence in the Internet of Things with IOTA Tangle and Mobile Agents. Doctoral thesis, University of Huddersfield.

Alseddiqi, Mohamed and Mishra, Rakesh (2010) A Diagnostic study on the teaching and learning styles in engineering education. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 105-109. ISBN 9781862180932

Alseddiqi, Mohamed, Mishra, Rakesh and Pislaru, Crinela (2010) Design and Development of an On-Line Work-Based Learning (WBL) Module to Enhance the Technical and Vocational Education (TVE) System in Bahrain. In: Global Learn Asia Pacific 2010: Global Conference on Learning and Technology. Association for the Advancement of Computing in Education (AACE), Vancouver, Canada, p. 1168. ISBN 1-880094-79-7

Alshahrani, Saeed, Ahmed, Ejaz and Ward, Rupert (2017) The influence of online resources on student–lecturer relationship in higher education: a comparison study. Journal of Computers in Education. pp. 1-20. ISSN 2197-9995

Alshahrani, Saeed and Ward, Rupert (2014) Social website technologies and their impact on society. In: User-Centric Technology Design for Nonprofit and Civic Engagments. Public Administration and Information Technology, XII (9). Springer, New York, USA. ISBN 9783319059631 (eBook)

Alviano, Mario, Calimeri, Francesco, Faber, Wolfgang, Leone, Nicola and Perri, Simona (2011) Unfounded Sets and Well-Founded Semantics of Answer Set Programs with Aggregates. Journal of Artificial Intelligence Research, 42. pp. 487-527. ISSN 1076 - 9757

Alviano, Mario, Faber, Wolfgang, Greco, Gianluigi and Leone, Nicola (2012) Magic Sets for disjunctive Datalog programs. Artificial Intelligence, 187-18. pp. 156-192. ISSN 0004-3702

Alviano, Mario, Faber, Wolfgang and Leone, Nicola (2010) Disjunctive ASP with functions: Decidable queries and effective computation. Theory and Practice of Logic Programming, 10 (4-6). pp. 497-512. ISSN 1471-0684

Alwodai, Ahmed (2015) Motor Fault Diagnosis Using Higher Order Statistical Analysis of Motor Power Supply Parameters. Doctoral thesis, University of Huddersfield.

Alwodai, Ahmed, Gu, Fengshou and Ball, Andrew (2011) Motor Current Signature Analysis of a Variable Speed Drive for Motor Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 884-892. ISBN 0954130723

Alwodai, Ahmed, Gu, Fengshou and Ball, Andrew (2011) Motor Current Signature Analysis of a Variable Speed Drive for Motor Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 884-892. ISBN 0954130723

Alwodai, Ahmed, Shao, Y., Yuan, X., Ahmed, M., Gu, Fengshou and Ball, Andrew (2013) Inter-Turn Short Circuit Detection Based on Modulation Signal Bispectrum Analysis of Motor Current Signals. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. ICAC 2013 . Brunel University, London, UK. ISBN 978-1908549082

Alwodai, Ahmed, Xia, X., Shao, Yimin, Gu, Fengshou and Ball, Andrew (2012) Modulation Signal Bispectrum Analysis of Motor Current Signals for Stator Fault Diagnosis. In: 18th International Conference on Automation and Computing (ICAC), 2012. IEEE, Loughborough, UK, pp. 1-6. ISBN 9781908549006

Alzarok, Hamza, Fletcher, Simon and Longstaff, Andrew P. (2017) 3D Visual Tracking of an Articulated Robot in Precision Automated Tasks. Sensors, 17 (1). ISSN 1424-8220

Alzarok, Hamza, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) Assessment of the positioning accuracy of a small articulated robot during machining operations. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 106-111. ISBN 9781862181212

Amaratunga, Dilanthi (2000) Assessment of facilities management performance. Property Management, 18 (4). pp. 258-266. ISSN 0263-7472

Amaratunga, Dilanthi (2000) Building performance evaluation in higher education properties : a facilities management approach. RICS Research Paper Series, 3 (14). ISSN 1354-506X

Amaratunga, Dilanthi (1999) Post-occupancy evaluation of higher educational buildings, departmental research report. Research Report. The University of Salford.

Amaratunga, Dilanthi (2004) An investigation into the future directions of performance measurement applications in facilities management, final report. Project Report. The University of Salford.

Amaratunga, Dilanthi, Baldry, D., Sarshar, M. and Newton, R.A. (2002) Qualitative and quantitative research in the built environment: application of "mixed" research approach: a conceptual framework to measure FM performance. Work Study, 20 (1). pp. 17-31. ISSN 0043-8022

Amaratunga, Dilanthi and Baldry, David (2000) Assessment of facilities management performance in higher education properties. Facilities, 18 (7/8). pp. 293-301. ISSN 0263-2772

Amaratunga, Dilanthi and Baldry, David (2002) Moving from performance measurement to performance management. Facilities, 20 (5/6). pp. 217-223. ISSN 0263-2772

Amaratunga, Dilanthi and Baldry, David (2003) A conceptual framework to measure facilities management performance. Property Management, 21 (2). pp. 171-189. ISSN 0263-7472

Amaratunga, Dilanthi, Baldry, David, Sarshar, Marjan and Newton, Rita (2002) Quantitative and qualitative research in the built environment: application of “mixed” research approach. Work Study, 51 (1). pp. 17-31. ISSN 0043-8022

Amaratunga, Dilanthi and Haigh, Richard (2009) Capacity building for post-disaster infrastructure reconstruction and management. International Journal of Strategic Property Management, 13 (2). pp. 83-86. ISSN 1648-715X

Amaratunga, Dilanthi and Haigh, Richard (2010) Consequences, challenges and opportunities. International Journal of Disaster Resilience in the Built Environment, 1 (2). ISSN 1759-5908

Amaratunga, Dilanthi and Haigh, Richard (2010) Disasters and the built environment: Towards a mature discipline. International Journal of Disaster Resilience in the Built Environment, 1 (1). ISSN 1759-5908

Amaratunga, Dilanthi and Haigh, Richard (2011) Post-disaster reconstruction of the built environment : Rebuilding for resilience. Blackwell Publishing Ltd, London, UK. ISBN 9781444333565

Amaratunga, Dilanthi, Haigh, Richard and Baldry, D. (2004) Customer related facilities management processes: understanding the needs of the customer. In: CIB W070 Facilities Management and Maintenance Symposium, 27-29th September 2004, Michigan State University, Michigan, United States. (Unpublished)

Amaratunga, Dilanthi, Haigh, Richard and Baldry, D. (2005) Structured process improvements in facilities management organisations: Best practice case studies in the retail sector. In: 11th Joint CIB International Symposium - Combining Forces - Advancing Facilities Management and Construction through Innovation, 13-16th June 2005, Helsinki, Finland. (Unpublished)

Amaratunga, Dilanthi, Haigh, Richard and Keraminiyage, Kaushal (2007) EURASIA: role of construction education in capacity building for facilities and infrastructure development within a developing country setting. In: CIB World Building Congress: Construction for Development, 14-17th May 2007, Cape Town International Conference Centre.. (Unpublished)

Amaratunga, Dilanthi, Haigh, Richard and Sarshar, Marjan (2005) Application of the balanced scorecard in the UK NHS's estates and facilities environment. In: 11th Joint CIB International Symposium - Combining Forces., 13-16th June 2005, Helsinki, Finland. (Unpublished)

Amaratunga, Dilanthi, Haigh, Richard, Sarshar, Marjan and Baldry, D. (2002) Application of the balanced scorecard concept to develop a conceptual framework to measure facilities management performance within NHS facilities. International Journal of Health Care Quality Assurance, 15 (4). pp. 141-151. ISSN 0952-6862

Amaratunga, Dilanthi, Haigh, Richard, Sarshar, Marjan and Baldry, David (2002) Assessment of facilities management process capability: NHS facilities case study. International Journal of Health Care Quality Assurance, 15 (6). pp. 277-288. ISSN 0952-6862

Amaratunga, Dilanthi, Haigh, Richard, Shanmugam, M., Elvitigala, Gayani and Ruddock, P. R. (2007) The role of women in construction industry development: The UK Perspective. In: CIB World Building Congress 2007, 21-25th May 2007, Cape Town, South Africa. (Unpublished)

Amaratunga, Dilanthi, Haigh, Richard, Shanmugam, M., Lee, A. J. and Elvitigala, Gayani (2006) Construction industry and women: a review of the barriers. In: 3rd International SCRI Research Symposium, 3-4th April 2006, Delft University, Netherlands. (Unpublished)

Amaratunga, Dilanthi and Jeong, Kwan Seok (2005) Guide to teamwork and leadership skills. Technical Report. Centre for Education in the Built Environment, University of Salford., Salford, UK.

Amaratunga, Dilanthi, Keraminiyage, Kaushal and Haigh, Richard (2005) Applicability of the software CMM higher capability maturity key process areas within the UK construction industry. In: 2nd Scottish Conference for the Post Graduate Researchers of the Built and Natural Environment, 16-17th November 2005, University of Glasgow, UK. (Unpublished)

Amaratunga, Dilanthi, Kulatunga, Udayangani and Haigh, Richard (2005) Research and development, skills requirements, and achieving excellence in construction. In: ACROM Doctoral Workshop, 30th November 2005, North Cumbria University, Newcastle.. (Unpublished)

Amaratunga, Dilanthi, Palliyaguru, Roshani and Haigh, Richard (2007) Review of infrastructure facilities development in Sri Lanka associated with post tsunami reconstruction and rehabilitation. In: CIB World Building Congress: Construction for Development, 14-17th May 2007, Cape Town International Conference Centre.. (Unpublished)

Amaratunga, Dilanthi and Sarshar, Marjan (2001) How to develop a balanced scorecard - NHS estates and facilities - guide to a balanced scorecard performance management and methodology. Technical Report. NHE Report, NHS Estates.

Amaratunga, Dilanthi and Sarshar, Marjan (2002) The use of balanced scorecard for strategy communication and performance management in NHS trusts. Research Report. NHS Report, NHE Estates.

Amaratunga, Dilanthi, Sarshar, Marjan and Baldry, David (2002) Process improvement in facilities management: the SPICE approach. Business Process Management Journal, 8 (4). pp. 318-337. ISSN 1463-7154

Amaratunga, Dilanthi, Sarshar, Marjan and Carter, M. A. (2002) Distributed virtual workspace for enhancing communication within the construction industry – DIVERCITY, Final report. Technical Report. Information Society Technology.

Amaratunga, Dilanthi, Sarshar, Marjan and Haigh, Richard (2003) Implementing the balanced scorecard in NHS estates and facilities. Technical Report. NHS Report, NHS Estates, Leeds, UK. (Unpublished)

Amaratunga, Dilanthi, Shanmugam, M., Haigh, Richard and Baldry, D. (2008) Construction and women: the lessons construction can learn from other sectors. In: Collaborative Relationships in Construction. Wiley-Blackwell, Hedley, pp. 224-244. ISBN 9781405180412

Amen, Bakhtiar (2018) Distributed Contextual Anomaly Detection from Big Event Streams. Doctoral thesis, University of Huddersfield.

Amin, Tanjilul (2019) Improving Hadron Therapy: Design of the Beam Transport System for a Biomedical Research Facility and PET Isotope Production. Doctoral thesis, University of Huddersfield.

Ammari, Faisal T., Lu, Joan and Aburrous, Maher (2014) Intelligent Banking XML Encryption Using Effective Fuzzy Classification. In: Emerging Trends in Information and Communication Technologies Security. Elsevier, London, UK, pp. 593-623. ISBN 9780124114746

Ammari, Faisal, Joan, Lu and Maher, Abur-rous (2011) Intelligent XML Tag Classification Techniques for XML Encryption Improvement. In: Privacy, Security, Risk and Trust (PASSAT), 2011 IEEE Third International Conference on and 2011 IEEE Third International Confernece on Social Computing (SocialCom). IEEE, pp. 1249-1252. ISBN 9781457719318

Ammari, Faisal and Lu, Joan (2010) Advanced XML Security: Framework for Building Secure XML Management System (SXMS). In: Information Technology: New Generations (ITNG), 2010 Seventh International Conference on, 12-14 April 2010, Las Vegas - USA.

Ammari, Faisal, Lu, Joan and Aburrous, Maher (2013) Improved Banking XML Transaction Encryption Using Tag Fuzzy Classification. In: International Conference on Computer Applications Technology, January 20-22 2013, Sousse,Tunisia. (Unpublished)

Amsdon, Timothy and Sibley, Martin J.N. (2013) Theoretical concepts and matlab modelling of VLC based MIMO systems. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 112-117. ISBN 9781862181212

Amsdon, Timothy John (2020) Implementation of a VLC HDTV Distribution System for Consumer Premises. Doctoral thesis, University of Huddersfield.

An, Lili (2015) The development of advanced creep constitutive equations for high chromium alloy steel (P91) at transition stress range. Doctoral thesis, University of Huddersfield.

Anderson, Iain J. and Ross, C. (2002) Template matching in the I1 norm. In: Algorithms for approximation IV refereed proceedings. University of Huddersfield, Huddersfield, pp. 130-137. ISBN 9781862180406

Anderton, J.V., Ward, Stephen and Sibley, Martin J.N. (1995) Signal-to-noise ratio (SNR) considerations due to the equalization of a partial response magneto-optical read channel. Proceedings of SPIE, 2451. pp. 415-425. ISSN 0277-786X

Andrade, António Ramos and Stow, Julian (2017) Assessing the efficiency of maintenance operators: a case study of turning railway wheelsets on an under-floor wheel lathe. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 231 (2). pp. 155-163. ISSN 1748-006X

Andrade, António Ramos and Stow, Julian (2017) Assessing the potential cost savings of introducing the maintenance option of ‘Economic Tyre Turning’ in Great Britain railway wheelsets. Reliability Engineering & System Safety, 168. pp. 317-325. ISSN 0951-8320

Andreu, J.M., Bordas, Joan, Diaz, J.F., Deancos, J.G., Gil, R., Medrano, Francisco J., Nogales, Eva, Pantos, E. and Towns-Andrews, Elizabeth (1992) Low resolution structure of microtubules in solution: Synchrotron X-ray scattering and electron microscopy of taxol-induced microtubules assembled from purified tubulin in comparison with glycerol and MAP-induced microtubules. Journal of Molecular Biology, 226 (1). pp. 169-184. ISSN 0022-2836

Andriessen, Hinke, Kluin, Marieke, Van Gulijk, Coen and Ale, Ben (2012) Participant observation in risk problems. In: 11th International Probabilistic Safety Assessment and Management Conference and the Annual European Safety and Reliability Conference 2012 (PSAM11 ESREL 2012). IAPSAM & ESRA, pp. 2247-2256. ISBN 9781622764365

Andriessen, Hinke, Van Gulijk, Coen and Ale, Ben (2012) Human factors in layers of defense in airport security. In: 11th International Probabilistic Safety Assessment and Management Conference and the Annual European Safety and Reliability Conference 2012 (PSAM11 ESREL 2012). IAPSAM & ESRA, pp. 4325-4332. ISBN 9781622764365

Anik, Abdullah All Mamun, Moon, Mosammat Sadia Akter, Arnob, Fahim Faysal, Hasan, Mehedi, Hoque, S. A. Naimul, Rahman, Mohammad Mashhunur, Ahmed, Tanzim Bin and Barua, Tonmoy (2024) RFID occupied advanced framework for specialized vehicle access, operating system, and wireless data transmission without human intervention. Archives of Advanced Engineering Science. ISSN 29724325

Anyakwo, Arthur (2020) Condition monitoring of curve squeal based on analysis of acoustic and vibration data. Doctoral thesis, University of Huddersfield.

Anyakwo, Arthur, Pislaru, Crinela and Ball, Andrew (2012) A New Method for Modelling and Simulation of the Dynamic Behaviour of the Wheel-rail contact. International Journal of Automation and Computing, 9 (3). pp. 237-247. ISSN 1476-8186

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modelling and simulation of dynamic wheel-rail interaction using a roller rig. Journal of Physics: Conference Series, 364. 012060. ISSN 1742-6596

Aouad, Ghassan, Bakis, Nick, Amaratunga, Dilanthi, Osbaldiston, S, Sun, M., Kishk, M, Al-Hajj, A and Pollock, R (2001) An integrated life cycle costing database: a conceptual framework. In: 17th Annual ARCOM Conference,, 5-7 September 2001, University of Salford.

Aouad, Ghassan, Kagioglou, Mike, Cooper, Rachel, Hinks, John and Sexton, Martin (1999) Technology management of IT in construction: a driver or an enabler? Logistics information management, 12 (1/2). pp. 130-137. ISSN 0957-6053

Appadoo, Robin (2021) Condition Monitoring and Fault Diagnosis of Fluid Machines in Process Industries. Doctoral thesis, University of Huddersfield.

Appadoo, Robin, Ball, Andrew and Gu, Fengshou (2010) Optimizing condition monitoring techniques applied to a three stage reciprocating compressor in a FMCG industry. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 185. ISBN 9781862180932

Appel, Orestes, Chiclana, Francisco, Carter, Jenny and Fujita, Hamido (2017) A Consensus Approach to the Sentiment Analysis Problem Driven by Support-Based IOWA Majority. International Journal of Intelligent Systems, 32 (9). pp. 947-965. ISSN 0884-8173

Appel, Orestes, Chiclana, Francisco, Carter, Jenny and Fujita, Hamido (2017) Successes and challenges in developing a hybrid approach to sentiment analysis. Applied Intelligence. ISSN 0924-669X

Appukuttan, Shailesh (2015) Adoption of e-Infrastructure: frontline experiences of researchers, and a model for researcher development. Vitae Occasional Papers, 2. pp. 32-40.

Appukuttan, Shailesh (2014) Developing experienced researchers’ use of technology: examining some critical issues. In: Vitae Researcher Development International Conference, 9th - 10th September 2014, Manchester, UK. (Unpublished)

Appukuttan, Shailesh (2013) Educational and Social researchers’ use of technology. In: JISC E-Learning in HE Conference 2013 - Teaching and Learning in the 21st Century, 12th February 2013, Leeds.

Araghi, Amir (2006) Infrastructure for web services that perform automated reasoning. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Arayici, Y., Coates, P., Koskela, Lauri, Kagioglou, Mike, Usher, C. and O'Reilly, K. (2011) Technology adoption in the BIM implementation for lean architectural practice. Automation in Construction, 20 (2). pp. 189-195. ISSN 0926-5805

Arebi, Lufti (2014) The use of passive telemetry in rotor fault diagnosis. Doctoral thesis, University of Huddersfield.

Arebi, Lufti, Gu, Fengshou and Ball, Andrew (2010) Rotor Misalignment Detection using a Wireless Sensor and a Shaft Encoder. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 6-13. ISBN 9781862180932

Arief, Ikhwan and Chen, Xun (2010) Key Parameters In Loose Abrasive Machining. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 1-5. ISBN 9781862180932

Arif, Shahab and Holmes, Violeta (2013) Electronic Braille Document Reader. In: Proceedings First International Conference on Technology for Helping People with Special Needs. ICHTP 2013 . Al-Imam Mohammad Ibn Saud Islamic University,, Riyadh, Kingdom of Saudi Arabia, pp. 16-21.

Arif, Mohammed, Folkes, Janet and Chen, Xun (2010) Detection of High and Low Temperature in the Grinding Zone using Laser Irradiation Technique. In: 36th International MATADOR Conference 2010, 14th - 16th July 2010, Manchester, UK. (Unpublished)

Ariguzo, Godwin C., Shea, T.P., Ward, Rupert and White, D.S (2007) The future of information technology education in Nigeria: innovative public-private partnerships. International Journal of Business Innovation and Research, 1 (4). pp. 425-447. ISSN 1751-0252

Armstrong, Barry and Unver, Ertu (2011) Sketching in Digital Clay: Digital sculpture for costume design visualisation. In: sculpture network Drawing Symposium UK 2011, 26 Aug 2011, Huddersfield, UK.

Ashar, Faisal, Amaratunga, Dilanthi and Haigh, Richard (2014) The Analysis of Tsunami Vertical Shelter in Padang City. Procedia Economics and Finance, 18. pp. 916-923. ISSN 2212-5671

Assaeh, Mohamed. I.M. (2019) FAULT DIAGNOSIS OF MECHANICAL SYSTEMS BASED ON ELECTRICAL SUPPLY CHARACTERISTICS. Doctoral thesis, University of Huddersfield.

Assairi, Bandar and Holmes, Violeta (2013) iShoes for blind and visually impaired people. In: Proceedings First International Conference on Technology for Helping People with Special Needs. ICHTP 2013 . Al-Imam Mohammad Ibn Saud Islamic University, Riyadh, Kingdom of Saudi Arabia, pp. 10-15.

Atkinson, Paul (2008) On the Origin of PCs. Doctoral thesis, University of Huddersfield.

Atkinson, Paul (2007) The best laid plans of mice and men: the computer mouse in the history of computing. Design Issues, 23 (3). pp. 46-61. ISSN 0747-9360

Atkinson, Paul, Marshall, Justin, Unver, Ertu and Dean, Lionel Theodore (2011) I did it my way: user engagement in post industrial manufacturing. In: SIM 2011 Sustainable Intelligent Manufacturing. IST Press, Leiria, Portugal, pp. 679-687. ISBN 978-989-8481-03-0

Atkinson, Paul, Unver, Ertu and Dean, Lionel Theodore (2004) Future factories : supportive technologies as creative processes. In: 8th International Design Conference, Design 2004, 18th-21st May 2004, Dubrovnik - Cavtat, Croatia.

Atkinson, Paul, Unver, Ertu, Marshall, Justin and Dean, Lionel Theodore (2008) Post Industrial Manufacturing Systems: the undisciplined nature of generative design. In: Proceedings of the Design Research Society Conference 2008. Sheffield Hallam University, 194/1-194/17. ISBN 9781843872931

Auzzir, Zairol A., Haigh, Richard and Amaratunga, Dilanthi (2014) Public-private Partnerships (PPP) in Disaster Management in Developing Countries: A Conceptual Framework. Procedia Economics and Finance, 18. pp. 807-814. ISSN 2212-5671

Awad, Mamoun Ghaleb (2021) AN INVESTIGATION INTO ONTOLOGY BASED ENHANCEMENT OF SEARCH TECHNOLOGIES FOR E-GOVERNMENT. Doctoral thesis, University of Huddersfield.

Ayyat, Suzan, Lu, Joan and Thabtah, Fadi (2014) Class Strength Prediction Method for Associative Classification. In: Proceedings of the Fourth International Conference on Advances in Information Mining and Management /. ARIA 2014 . ARIA International Academy, Research and Industry Association, Paris, France, pp. 5-10. ISBN 978-1-61208-364-3

Baadel, Said and Lu, Joan (2019) Data Analytics: intelligent anti-phishing techniques based on Machine Learning. Journal of Information & Knowledge Management, 18 (1). pp. 1-17. ISSN 1793-6926

Baadel, Said, Majeed, Asim and Kabene, Stefane (2017) Technology Adoption and Diffusion in the Gulf: Some Challenges. In: Proceedings of the 8th International Conference on E-Education, E-Business, E-Management and E-Learning (IC4E'17). ACM, New York, pp. 16-18. ISBN 9781450348218

Baadel, Said, Thabtah, Fadi and Lu, Joan (2015) Mutli Cluster Overlapping K-Means Extension (MCOKE) Algorithm. World Academy of Science, Engineering and Technology International Journal of Computer, Electrical, Automation, Control and Information Engineering, 9 (2).

Baadel, Said, Thabtah, Fadi and Lu, Joan (2016) Overlapping Clustering: A Review. In: SAI Computing Conference (SAI), 2016. IEEE. ISBN 978-1-4673-8461-2

Baadel, Said, Thabtah, Fadi and Majeed, Asim (2018) Avoiding the Phishing Bait: The Need for Conventional Countermeasures for Mobile Users. In: 2018 IEEE 9th Annual Information Technology, Electronics and Mobile Communication Conference (IEMCON), 1-3 Nov. 2018, Vancouver.

Ball, Andrew, Gu, Fengshou and Liu, S (2002) The on-line detection of engine misfire at low speed using multiple feature fusion with fuzzy pattern recognition. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (5). pp. 391-402. ISSN 0954-4070

Ball, Andrew, Wang, Tian T., Tian, X. and Gu, Fengshou (2016) A robust detector for rolling element bearing condition monitoring based on the modulation signal bispectrum,. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Ballard, Glenn, Koskela, Lauri, Howell, Gregory A. and Tommelein, Iris D. (2005) Discussion of “Improving Labor Flow Reliability for Better Productivity as Lean Construction Principle” by H. Randolph Thomas, Michael J. Horman, R. Edward Minchin Jr., and Dong Chen. Journal of Construction Engineering and Management, 131 (5). pp. 615-616. ISSN 0733-9364

Bamford, David, Dehe, Benjamin, Reid, Iain, Bamford, Jim and Papalexi, Marina (2017) Sports operations management: the whole nine yards. In: POMS 2017, 28th Annual Conference, May 5 - 9, Seattle, WA. (Unpublished)

Bamford, David, Forrester, Paul and Ismail, Maruan (2011) Analysing approaches to technology transfer in the UK National Health Sector. OR Insight, 24 (2). pp. 90-109. ISSN 0953-5543

Bamford, Jim, Dehe, Benjamin, Bamford, David, Reid, Iain and Papalexi, Marina (2017) Benchmarking stadium operations to identify the effects of operations on performance. In: POMS 2017, 28th Annual Conference, May 5 - 9, Seattle, WA. (Unpublished)

Banitalebi Dehkordi, H., Farzaneh, Masoud, Kollar, László E. and Van Dyke, P. (2011) Experimental study of spray characteristics and its uniformity under different icing conditions. In: IWAIS 2011 - The 14th International Workshop on Atmospheric Icing of Structures, 8-13th May 2011, Chongqing, China. (Unpublished)

Banitalebi Dehkordi, H., Kollar, László E., Farzaneh, Masoud, Camirand, P. and D'Amours, C. (2010) Introduction, instrumentation and calibration of CIGELE atmospheric icing research wind tunnel. Research Report. University of Quebec. (Unpublished)

Baqqar, Mabrouka, Gu, Fengshou and Lu, Joan (2010) Machine Performance and Condition Monitoring Through Data Mining and Database Optimization. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 186. ISBN 9781862180932

Baqqar, Mabrouka, Tran, Van Tung, Gu, Fengshou and Ball, Andrew (2013) Comparison between adaptive neuro-fuzzy inference system and general regression neural networks for gearbox fault detection using motor operating parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 118-126. ISBN 9781862181212

Baqqar, Mabrouka, Wang, Tie, Ahmed, Mahmud, Gu, Fengshou, Lu, Joan and Ball, Andrew (2012) A General Regression Neural Network Model for Gearbox Fault Detection using Motor Operating Parameters. In: 18th International Conference On Automation And Computing (ICAC), 2012. IEEE, Cardiff, UK, pp. 584-588. ISBN 978-1-4673-1559-3

Bareham, Gerard (2001) New Architects 2: A guide to Britain's best young architectural practices. In: New Architects 2: A guide to Britain's best young architectural practices. Merrell Publishers Limited, London, pp. 46-47. ISBN 1858941385

Barnes, Andrew, McCluskey, T.L. and Osborne, Hugh (2008) Benefits of associative classification within text categorisation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 34-39. ISBN 978-1-86218-067-3

Barrans, Simon, Allport, John and Khodabakhshi, Goodarz (2014) Turbocharger Structural Integrity. Manufacturing and Industrial Engineering, 13 (3-4). ISSN 1335-7972

Barrans, Simon and Bhat, N. (2005) Optimization of Flat PAD Bearings with the aid of Finite Element Analysis. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Barrans, Simon and Weston, R.H (2006) Technical Application Series - A strain data aquisition system suitable for remote applications. Experimental Techniques, 28 (3). pp. 68-71. ISSN 0732-8818

Barrett, Peter, Amaratunga, Dilanthi, Haigh, Richard, Keraminiyage, Kaushal and Pathirage, C. P. (2010) CIB world congress 2010 proceedings. CIB. ISBN 9781905732913

Bartak, Roman and McCluskey, T.L. (2007) Introduction to the Special Issue on Knowledge Engineering Tools and Techniques for Automated Planning and Scheduling Systems. Knowledge Engineering Review, 22 (2). pp. 115-116. ISSN 0269-8889

Bartak, Roman and McCluskey, T.L. (2005) KE Competition: an overview. In: Proceedings of the First International Competition on Knowledge Engineering. UNSPECIFIED. (Unpublished)

Bartak, Roman and McCluskey, T.L. (2008) Workshop on Knowledge Engineering for Planning and Scheduling (KEPS). In: Workshop on Knowledge Engineering for Planning and Scheduling (KEPS), at ICAPS-08, 14-18 September 2008, Sydney, Australia.

Bartak, Roman and McCluskey, T.L. (2006) The first competition on knowledge engineering for planning and scheduling. AI Magazine, Spring. pp. 97-98. ISSN 0738-4602

Basha, Majed (2019) Design and implementation of a tuned Analog Front-End for extending VLC transmission range. Masters thesis, University of Huddersfield.

Bashir, Abid and Denton, Paul (2010) The Identification of Enterprise System Limitations within Manufacturing Supply Chains. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 110-115. ISBN 9781862180932

Basu, Rajlaxmi (2018) Estimation of Input Variable as Initial Condition of a Chaos Based Analogue to Digital Converter. Doctoral thesis, University of Huddersfield.

Basu, Rajlaxmi, Dutta, Dhrubajyoti, Banerjee, Soumitro, Holmes, Violeta and Mather, Peter (2017) An Algorithmic Approach for Signal Measurement Using Symbolic Dynamics of Tent Map. IEEE Transactions on Circuits and Systems I: Regular Papers, 65 (7). pp. 2221-2231. ISSN 1549-8328

Bayar, M.S, Aziz, Zeeshan, Tezel, Algan, Arayici, Y. and Biscaya, S. (2016) Optimizing Handover of As-Built Data Using BIM for Highways. In: 1st International (UK) BIM Academic Forum Conference, 13-15 September 2016, Glasgow, Scotland.

Baydar, N and Ball, Andrew (2000) Detection of gear deterioration under varying load conditions by using the instantaneous power spectrum. Mechanical Systems and Signal Processing, 14 (6). pp. 907-921. ISSN 0888-3270

Baydar, N and Ball, Andrew (2003) Detection of gear failures via vibration and acoustic signals using wavelet transform. Mechanical Systems and Signal Processing, 17 (4). pp. 787-804. ISSN 0888-3270

Baydar, N and Ball, Andrew (2001) Detection of incipient tooth defect in helical gears using multivariate statistics. Mechanical Systems and Signal Processing, 15 (2). pp. 303-321. ISSN 0888-3270

Baydar, N and Ball, Andrew (2001) A comparative study of acoustic and vibration signals in detection of gear failures using Wigner-Ville distribution. Mechanical Systems and Signal Processing, 15 (6). pp. 1091-1107. ISSN 0888-3270

Baydar, N, Ball, Andrew and Payne, B.S. (2002) Detection of incipient gear failures using statistical techniques. IMA Journal of Management Mathematics, 13 (1). pp. 71-79. ISSN 1471-678X

Bayliss, Alice, Hales, Derek, Palmer, Scott and Sheridan, Jenn (2007) Emergent Objects: Hoverflies. In: Emergent Objects: Performing Design, Second Invited Colloquium, 17th-19th December, School of Performance and Cultural Industries, University of Leeds. (Unpublished)

Beake, B. D., Davies, M. I., Liskiewicz, T.W., Vishnyakov, Vladimir and Goodes, S. R. (2013) Nano-scratch, nanoindentation and fretting tests of 5–80nm ta-C films on Si(100). Wear, 301 (1-2). pp. 575-582. ISSN 0043-1648

Beake, B.D., Liskiewicz, T.W., Vishnyakov, Vladimir and Davies, M.I. (2015) Development of DLC coating architectures for demanding functional surface applications through nano- and micro-mechanical testing. Surface and Coatings Technology, 284. pp. 334-343. ISSN 0257-8972

Beaumont, Ben and Compton, Martin (2013) Using Flip Cameras To Activate Reflection And Collaboration On Initial Teacher Training Diploma In Teaching In The Lifelong Learning Sector (DTLLS) Courses. Teaching in lifelong learning: a journal to inform and improve practice, 4 (2). pp. 32-37. ISSN 2040-0993

Beddall-Hill, Nicola, Jabbar, Abdul and Al Shehri, Saleh (2011) Social Mobile Devices as Tools for Qualitative Research in Education: iPhones and iPads in Ethnography, Interviewing, and Design-Based Research. Journal of the Research Center for Educational Technology, 7 (1). pp. 67-90. ISSN 1948-075x

Beech, Guy (2016) The Benefits of Using XML Technologies in Astronomical Data Retrieval and Interpretation. In: Proceedings of the 2016 conference on Big Data from Space (BiDS’16). Publications Office of the European Union, Joint Research Centre, pp. 268-271. ISBN 978-92-79-56980-7

Bell, Andrew (2021) Towards an integrated strategy for effective machine tool probing. Masters thesis, University of Huddersfield.

Bell, Dennise, Marsden, Philip H. and Kirby, Mark (2003) Are users ready for electronic prescription processing? In: Human-Computer Interaction: Theory and Practice (part 1). Human Factors and Ergonomics, Vol 1 . CRC Press, pp. 649-653. ISBN 9780805849301

Bellon, Jacques A. and Sibley, Martin J.N. (2000) Frequency response compensation of transit time limited pin photodiode. Electronics letters, 36 (14). pp. 1222-1223. ISSN 0013-5194

Bellon, Jacques A., Sibley, Martin J.N. and Greaves, S.D. (1999) Hub architecture for infra-red wireless networks in office environments. IEE Proceedings - Optoelectronics, 146 (2). pp. 78-82. ISSN 1350-2433

Ben Saleh, Ahmed, Sibley, Martin J.N. and Mather, Peter (2014) Energy efficient cluster scheduling and interference mitigation for IEEE 802.15.4 network. In: 2014 International Computer Science and Engineering Conference (ICSEC), 30th July - 1st August 2014, Thailand.

Benghozzi, A., Shao, Y., Shi, Z., Gu, Fengshou and Ball, Andrew (2012) The Diagnosis of a Gearbox Transmission System Using Electrical Control Parameters. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. IEEE, Loughborough, UK, pp. 1-6. ISBN 9781908549006 / 9781467317221

Bentley, Peter J. and Wakefield, Jonathan P. (1997) Conceptual Evolutionary Design by a Genetic Algorithm. Engineering design and automation, 3 (2). pp. 119-131. ISSN 1077-2642

Bentley, Peter J. and Wakefield, Jonathan P. (1996) The Evolution of Solid Object Designs using Genetic Algorithms. In: Modern Heuristic Search Methods. John Wiley & Sons Inc., Chichester, pp. 199-215. ISBN 978-0-471-96280-9

Bentley, Peter J. and Wakefield, Jonathan P. (1998) Finding acceptable solutions in the pareto-optimal range using multiobjective genetic algorithms. In: Soft Computing in Engineering Design and Manufacturing. Springer-Verlag, pp. 231-240. ISBN 3-540-76214-0

Bentley, Peter J. and Wakefield, Jonathan P. (1996) Generic Representation of Solid-Object Geometry for Genetic Search. Microcomputers in Civil Engineering, 11 (3). pp. 153-161. ISSN 1093-9687

Bentley, Peter J. and Wakefield, Jonathan P. (1998) Generic evolutionary design. In: Soft Computing in Engineering Design and Manufacturing. Springer-Verlag, pp. 289-298. ISBN 3-540-76214-0

Bentley, Peter J. and Wakefield, Jonathan P. (1996) Hierarchical Crossover in Genetic Algorithms. In: Proceedings of the 1st On-line Workshop on Soft Computing (WSC1), 19-30 August 1996, Nagoya University, Japan.

Bentley, Peter J. and Wakefield, Jonathan P. (1996) Overview of a Generic Evolutionary Design System. In: Proceedings of the 2nd On-line Workshop on Evolutionary Computation (WEC2), 4-22 March 1996, Nagoya University, Japan.

Bentley, Peter J. and Wakefield, Jonathan P. (1995) The Table: An Illustration of Evolutionary Design using Genetic Algorithms. In: Genetic Algorithms in Engineering Systems: Innovations and Applications, 1995. GALESIA. First International Conference on (Conf. Publ. No. 414). IEEE, London, pp. 412-418. ISBN 0-85296-650-4

Benzair, B., Glover, Ian and Gardiner, John G.G. (1991) Vertical propagation of radio signals in an eleven storey building at 144 MHz. In: Sixth International Conference on Mobile Radio and Personal Communications. Peter Peregrinus, pp. 83-86. ISBN 9780852965306

Berberkic, Sanjin (2014) Measurement of small signal variations using one-dimensional chaotic maps. Doctoral thesis, University of Huddersfield.

Berberkic, Sanjin, Mather, Peter and Holmes, Violeta (2010) A Low Cost Electronic Load for Renewable Energy Systems. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 187. ISBN 9781862180932

Berberkic, Sanjin, Mather, Peter, Holmes, Violeta and Sibley, Martin J.N. (2011) Design of a Monitoring and Test system for PV based Renewable Energy Systems. In: International Conference on Renewable Energies and Power Quality (ICREPQ'11), 13-15 April 2011, Las Palmas de Gran Canaria, Spain. (Unpublished)

Berkenbusch, Jan (2015) Development of a control system for automated cab roof deflectors for articulated trucks. Masters thesis, University of Huddersfield.

Bertelsen, Sven and Koskela, Lauri (2005) Approaches to Managing Complexity in Project Production. In: 13th International Group for Lean Construction Conference, 19-21st July 2005, Sydney, Australia. (Unpublished)

Bertelsen, Sven, Koskela, Lauri, Henrich, Guilherme and Rooke, John (2006) Critical Flow – Towards a Construction Flow Theory. In: Proceedings IGLC-14, July 2006, Santiago, Chile. IGLC, pp. 31-40.

Betz, Stefanie, Becker, Christoph, Chitchyan, Ruzanna, Duboc, Leticia, Easterbrook, Steve, Penzenstadler, Birgit, Seyff, Norbert and Venters, Colin (2015) Sustainability Debt: A Metaphor to Support Sustainability Design Decisions. In: Fourth International Workshop on Requirements Engineering for Sustainable Systems (RE4SuSy), 24th August 2015, Ottawa, Canada.

Bevan, Adam and Klecha, Stephanie (2016) Use of Magnetic Flux Techniques to Detect Wheel Tread Damage. Proceedings of the ICE - Transport, 169 (5). pp. 330-338. ISSN 0965-092X

Bevan, Adam (2017) Wheel Damage Research. In: ICRI Workshop, 01/02/2017, London. (Unpublished)

Bevan, Adam, Jaiswal, Jay and Tucker, Gareth J. (2017) Deployment of Available Rail Steels to Reduce Life Cycle Costs. In: 6th Rail Research UK Association Annual Conference, 16th November 2017, London.

Bevan, Adam, Winchurch, Barry and Godart, Matthieu (2017) Quantifying wheel tread damage using MRX surface crack measurement system. In: The Stephenson Conference: Research for Railways, 25th-27th April 2017, London, UK. (Unpublished)

Bezin, Yann (2007) Development of flexible track system model and its application to advanced railway track design. In: 1st VI-grade User's Conference, 13-14th November 2007, Marburg, Germany. (Unpublished)

Bezin, Yann and Alonso, A. (2012) The Assessment of Railway Track Conicity and the Question of Limit Radius. In: 1st international conference on railway technology : research development and maintenance, 18-20 April 2012, Las Palmas de Gran Canaria - Spain. (Unpublished)

Bezin, Yann, Alonso, A., Zacher, M., Eickhoff, B., Xie, G. and Iwnicki, S. (2011) A study of the boundary conditions for the evaluation of railway track conicity. In: 22nd IAVSD Symposium, 14-19th August 2011, Manchester Metropolitan University. (Unpublished)

Bezin, Yann, Cavalletti, M. and Iwnicki, S. (2005) Understanding the wheel-rail interface using an integrated flexible track simulation tool. In: MSC.Software 2005 Virtual Product Development Conference, October 24 - 26, 2005, Hilton Munich Park, Munich, Germany. (Unpublished)

Bezin, Yann, Farrington, D., Davies, C., Penny, C., Temple, B., Kassa, E. and Iwnicki, S. (2009) The dynamic response of a slab track construction and its benefits with respect to conventional ballasted track. In: 21st international symposium on dynamics of vehicles on roads and tracks, 17-21st August 2009, Stockholm, Sweden. (Unpublished)

Bezin, Yann, Farrington, D., Penny, C. and Temple, B. (2008) The study of innovative track designs for an improved support condition of the railway track system. In: 2nd VI-grade User's Conference, 4-5th November 2008, Udine, Italy. (Unpublished)

Bezin, Yann, Funfschilling, C., Kraft, S and Mazzola, L. (2015) Virtual testing environment tools for railway vehicle certification. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 229 (6). pp. 755-769. ISSN 0954-4097

Bezin, Yann, Iwnicki, S. and Cavalletti, M. (2007) The effect of dynamic roll on wheel rail contact conditions. In: 20th international symposium on dynamics of vehicles on roads and tracks, 13-17th August 2007, Berkeley, California. (Unpublished)

Bezin, Yann, Iwnicki, S. and Guerguil, N. (2001) Modelling leafspring suspensions for virtual acceptance test. In: 2nd international workshop on freight vehicle design, April 2001, Manchester UK. (Unpublished)

Bezin, Yann, Iwnicki, S., Stow, J., Blair, S. and Kay, T. (2001) Development of a method to predict stresses in rails using ADAMS/Rail and ABAQUS. In: 16th European ADAMS User Conference, November 14-15, 2001, Berchtesgaden, Germany. (Unpublished)

Bhatti, Faizan Ahmed (2021) Exploiting Control Theory to Improve Domain-Independent Planning in Hybrid Domains. Doctoral thesis, University of Huddersfield.

Bhatti, S. A., Glover, Ian, Atkinson, R. and Shan, Q. (2011) Modelling of Noise Environment of an Electricity Transmission Substation using Symmetric Alpha-Stable Distributions. In: Festival of radio science, 12th January 2011, University of Leicester. (Unpublished)

Bhatti, S. A., Michie, C., Glover, Ian and Andonovic, I. (2012) The use of UHF transponders as a potential replacement for cattle passports. In: UK Festival of Radio Science, 19th April 2012, The University of Durham.. (Unpublished)

Bhatti, S. A., Shan, Q., Atkinson, R., Vieira, M. and Glover, Ian (2011) Vulnerability of Zigbee to impulsive noise in electricity substations. In: 2011 XXXth URSI General Assembly and Scientific Symposium. IEEE, pp. 1-4. ISBN 9781424451173

Bhatti, S. A., Shan, Q., Glover, Ian, Atkinson, R. and Rutherford, R. (2009) Extraction of Middleton Noise Model Parameters from Measurement of the Noise Environment in an Electricity Substation. In: IET-URSI UK Festival of Radio Science, December 2009, Birmingham. (Unpublished)

Bhatti, S. A., Shan, Qingshan, Glover, Ian, Atkinson, Robert, Portugues, I.E., Moore, P.J. and Rutherford, R. (2009) Impulsive noise modelling and prediction of its impact on the performance of WLANs. In: 17th European Signal Processing Conference, 24-28th August 2009, Glasgow, Scotland. (Unpublished)

Bhatti, S.A., Glover, Ian, Atkinson, R., Shan, Qingshan, Yang, Yang, de s Neto, J.M.R. and da Rocha Neto, J.S. (2010) Vulnerability of bluetooth to impulsive noise in electricity transmission substations. In: Ist IET International Conference on Wireless Sensor Networks, 15-17th November 2010, Beijing, China.

Bhatti, S.A., Shan, Q., Atkinson, R. and Glover, Ian (2012) Performance simulations of WLAN and Zigbee in electricity substation impulsive noise environments. In: 2012 IEEE Third International Conference on Smart Grid Communications (SmartGridComm). IEEE, pp. 675-679. ISBN 9781467309103

Billington, Peter E., Barnes, Christopher M. and Wakefield, Jonathan P. (2001) Methods and systems of monitoring traffic flow. US 6177886.

Bills, Paul J., Blunt, Liam and Jiang, Xiang (2007) Development of a technique for accurately determining clinical wear in explanted total hip replacements. Wear, 263 (7-12). pp. 1133-1137. ISSN 0043-1648

Bills, Paul J., Blunt, Liam and Jiang, Xiang (2006) A metrology solution for determination of form deviation and wear in orthopaedic joint replacements. In: 33rd Leeds-Lyon Symposium on Tribology, Tuesday 12th - Friday 15th September 2006, Trinity and all Saints College, Leeds. (Unpublished)

Bingham, Mark (2011) An Interest Point Based Illumination Condition Matching Approach to Photometric Registration Within Augmented Reality Worlds. Doctoral thesis, University of Huddersfield.

Bingham, Mark, Taylor, D., Gledhill, Duke and Xu, Zhijie (2008) Integration of Real and Virtual Light Sources in Augmented Reality Worlds. In: Proceedings of the 14th International Conference on Automation and Computing. ICAC, pp. 225-229. ISBN 978-0-9555294-2-0

Bingham, Mark, Taylor, D., Gledhill, Duke and Xu, Zhijie (2008) Integration of real and virtual light sources in augmented reality worlds. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 28-33. ISBN 978-1-86218-067-3

Bingham, Mark, Taylor, D., Gledhill, Duke and Xu, Zhijie (2009) A multi-view interest point based approach to photometric realism within augmented reality systems. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 82-88. ISBN 9781862180857

Biundo, Susanne, Borrajo, Daniel and McCluskey, T.L. (2002) Planning and scheduling - for improving flexibility in eCommerce and electronic work. In: eBusiness and eWork 2002 Conference and Exhibition, 16-18 October 2002, Prague, Czech Republic. (Unpublished)

Blackwell, Kane (2018) SOCIAL MEDIA, NEWS, AND YOUTHS: HOW YOUNG ADULTS CONSTRUCT AND ENGAGE NEWS CONTENT ON FACEBOOK. Masters thesis, University of Huddersfield.

Bliss, N., Bordas, Joan, Fell, B.D., Harris, N.W., Helsby, W.I., Mant, Geoff R., Smith, W. and Towns-Andrews, Elizabeth (1995) W16.1: A new fixed wavelength diffraction station at the SRS Daresbury. Review of scientific instruments, 66 (2). pp. 1311-1313. ISSN 0034-6748

Blunt, Liam (2006) Metrology of MST and microfluidic devices using white light interferometery and novel surface metrology characterisation. In: Micro and Nano Technology (MNT) Measurement Club, 1-day meeting, The Measurement and Characterisation of MST Devices (MEMS), Monday 27 February 2006, National Physical Laboratory, Hampton Road, Teddington, Middlesex TW11 0LW. (Unpublished)

Blunt, Liam, Armstrong, J. and Blunt, R. (2005) The use of advanced 3D surface metrology for the characterisation of epi-wafers and Si structures. Physica Status Solidi (c), 2 (4). pp. 1251-1258. ISSN 1610-1634

Blunt, Liam, Jiang, Xiang, Leach, Richard K., Harris, Peter M. and Scott, Paul J. (2007) The development of user-friendly software measurement standards for surface topography software assessment. Wear, 264 (5-6). pp. 389-393. ISSN 0043-1648

Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2005) Advances in micro and nano-scale surface metrology. Key Engineering Materials, 295-29. pp. 431-436. ISSN 1013-9826

Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2003) Advances in micro and nano-scale surface metrology. In: ISMTII 2003, The Sixth International Symposium on Measurement Technology and Intelligent Instruments, 28 November - 1 December 2003, Academic Building, Hong Kong University of Science and Technology, Kowloon, Hong Kong.

Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2003) Future developments in surface metrology. In: Advanced Techniques for Assessment Surface Topography. Kogan Page, London, pp. 339-347. ISBN 1903996112

Blunt, Liam, Jiang, Xiang, Xiao, Shaojun and Scott, Paul J. (2004) The use of interferometry and image analysis techniques for metrology of MST devices. In: 8th International Symposium on Measurement and Quality Control in Production, 12th-15th October, 2004, Erlangen, Germany. (Unpublished)

Blunt, Liam, Leach, Richard K., Scott, Paul J., Harris, Peter M., Xiao, Shaojun, Li, T., Parkin, G. and Jiang, Xiang (2005) Development of “softgauges” for surface profile metrology. In: 5th Euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Blunt, Liam and Scott, Paul J. (2012) Characterisation of structured geometry surfaces features on micro and nano scale surfaces. International Journal of Nanomanufacturing, 8 (5/6). pp. 359-371. ISSN 1746-9392

Blunt, Liam and Stout, K.J. (2001) 8th International Conference on Metrology and Properties of Engineering Surfaces26–29 April 2000, University of Huddersfield, UK. International Journal of Machine Tools and Manufacture, 41 (13-14). p. 1845. ISSN 0890-6955

Blunt, Liam, Xiao, Shaojun, Jiang, Xiang and Scott, Paul J. (2005) Geometrical characterisation of MST and microfluidic devices using novel surface metrology techniques. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Blunt, Liam, Zhang, Hongyu, Barrans, Simon, Jiang, Xiang and Brown, Leigh (2008) What results in fretting wear on polished femoral stems. Tribology International, 42 (11). pp. 1605-1614. ISSN 0301-679X

Boel, René, Marinica, Nicolae, Moradzadeh, Mohammad and Sutarto, Herman (2013) Some paradigms for coordinating feedback control with applications to urban traffic control and smart grids. In: 2013 3rd International Conference on Instrumentation Control and Automation (ICA). IEEE. ISBN 978-1-4673-5795-1

Bolat, Elvira, Kooli, Kaouther and Wright, Len Tiu (2016) Businesses and mobile social media capability. Journal of Business & Industrial Marketing, 31 (8). pp. 971-981. ISSN 0885-8624

Bonner, John V.H. (2009) Adding critical sensibilities to domestic communication technologies. International Journal of Human-Computer Studies, 67 (2). pp. 215-221. ISSN 1071-5819

Bonner, John V.H. (1999) Exploring the ‘interface culture’ between ergonomics and product interface design. In: Design Cultures: Proceedings of the Third European Academy of Design Conference. European Academy of Design. ISBN 9780902896215

Bonner, John V.H. (2007) Facilitating purposeful adoption and diffusion of ubiquitous communication technologies in domestic environments. In: Family and Communication Technologies Workshop, 24th May 2007, Northumbria University, Newcastle upon Tyne, UK. (Unpublished)

Bonner, John V.H. (1999) Implications for using intelligence in consumer products. In: Human factors in product design: current practice and future trends. CRC Press, pp. 56-63. ISBN 9780748408290

Bonner, John V.H. (2007) Organisational ambivalence in creating innovative interactions. In: CREATE 2007: Creating Innovative Interactions Conference: Creative Inventions, Innovations and Everyday Designs in HCI, 13 June 2007 to 14 June 2007, British Computer Society, Covent Garden, London.

Bonner, John V.H. (2007) Organisational ambivalence in creating innovative interactions. In: Proceedings of Create07: Creative Inventions, Innovations and Everyday Designs in HCI. British Computer Society.

Bonner, John V.H. (2006) Physicality from the sidelines: potential hurdles and solutions in the development of novel interaction styles. In: Physicality 2006: First International Workshop on Physicality: Position Papers. University of Lancaster, pp. 11-12. ISBN 9781862201781

Bonner, John V.H., Li, Andol X and Robinson, Jo (2009) Methodological issues in designing and evaluating smart domestic technologies for intermittent use. In: Pervasive 2009, 11-14 May 2009, Nara, Japan. (Unpublished)

Bonner, John V.H. and Porter, J. Mark (2002) Envisioning future needs: from pragmatics to pleasure. In: Pleasure With Products: Beyond Usability. Contemporary Trends Institute Series . Taylor & Francis, London, pp. 151-161. ISBN 9780415237048

Bonner, John V.H. and Porter, J. Mark (2000) Introducing user participative design methods to industrial designers. Human Factors and Ergonomics Society Annual Meeting Proceedings (6 - Mu). pp. 787-790. ISSN 1071-1813

Bonner, John V.H., Wilson, Andrew and Nardi, Asra (2008) Children, guidebooks, SMS and virtual characters. Keho (3). pp. 33-35.

Bonner, John V.H., Wilson, Andrew and Roberts, L. (2007) Public space as a design factor in sharable technologies. Discussion Paper. UNSPECIFIED.

Bonner, John V.H., Wilson, Andrew and Roberts, Lisa (2007) Public space as a design factor in sharable technologies. In: Shareable Interfaces Workshop, 19th - 20th June 2007, Milton Keynes, UK. (Unpublished)

Bonner, Stephen, Pulley, Carl, Kureshi, Ibad, Holmes, Violeta, Brennan, John and James, Yvonne (2013) Using OpenStack to improve student experience in an H.E. environment. In: Proceedings of 2013 Science and Information Conference. SAI 2013 . The Science and Information Organization, London, UK, pp. 888-893. ISBN 9780989319300

Boothroyd, Andrew (2011) Using Mesh Cutting in an Interactive Podiatric Orthopaedic Surgery Simulator. Masters thesis, University of Huddersfield.

Bordas, Joan, Diakun, G.P., Diaz, F.G., Harries, J.E., Lewis, Robert A., Lowy, J., Mant, Geoff R., Martin-Fernandez, Maria Luisa and Towns-Andrews, Elizabeth (1993) Two-dimensional time-resolved X-ray diffraction studies of live isometrically contracting frog sartorius muscle. Journal of Muscle Research and Cell Motility, 14 (3). pp. 311-324. ISSN 0142-4319

Bordas, Joan, Diakun, G.P., Harries, J.E., Lewis, Robert A., Mant, Geoff R., Martin-Fernandez, Maria Luisa and Towns-Andrews, Elizabeth (1991) Two-dimensional time resolved X-ray diffraction of muscle: Recent results. Advances in Biophysics, 27. pp. 15-33. ISSN 0065-227X

Borisov, Oleg (2015) New optical sensing system applied to taut wire based straightness measurement. Doctoral thesis, University of Huddersfield.

Borisov, Oleg, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2010) Efficient Machine Error Measurement. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932

Borisov, Oleg, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) New low cost sensing head and taut wire method for automated straightness measurement of machine tool axes. Optics and lasers in engineering, 51 (8). pp. 978-985. ISSN 0143-8166

Boyacioglu, Pelin, Bevan, Adam and Vickerstaff, Andy (2017) Prediction of RCF Damage on Underground Metro Lines. In: First International Conference on Rail Transportation, 10-12th July 2017, Chengdu, China.

Boyle, A, Chen, Xun, Rowe, W. Brian and Allanson, D.R. (1997) Automatic dwell control in computer numerical control plunge grinding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 211 (7). pp. 565-575. ISSN 0954-4054

Bradbury, James (2021) Harnessing Content-Aware Programs for Computer-Aided Composition in a Studio-Based Workflow. Doctoral thesis, University of Huddersfield.

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Approximation of surface roughness profiles and parameters. In: International Conference on Advanced Mathematical and Computational Tools in Metrology (AMCTM 2005), 27–29 June, 2005, Instituto Português da Qualidade, Caparica, Portugal. (Unpublished)

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Propagation of uncertainty in discretely sampled surface roughness profiles. Advanced mathematical and computational tools in metrology VII. pp. 271-275.

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Reconstruction of continuous surface profiles from discretely sampled data. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Brennan, James K., Jiang, Xiang, Crampton, Andrew and Leach, Richard K. (2006) Propagation of measurement uncertainty for surface texture parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Brennan, James K., Mason, John C., Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2004) Approximation of surface texture profiles and parameters. In: 4th International Conference of the European Society for Precision Engineering and Nanotechnology, euspen, 30th May - 3rd June 2004, Scottish Exhibition and Conference Centre (SECC), Glasgow. (Unpublished)

Brethee, Khaldoon F. (2018) Condition Monitoring of Helical Gear Transmissions Based on Vibration Modelling and Signal Processing. Doctoral thesis, University of Huddersfield.

Brethee, Khaldoon F., Zhang, Ruiliang, Hamad, Naima, Gu, Fengshou and Ball, Andrew (2016) Influence of Lubricant Starvation on Gearbox Vibration Signatures for Condition Monitoring. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Brethee, Khaldoon F., Zhou, Xiaojun, Gu, Fengshou and Ball, Andrew (2016) Frictional Effects on the Diagnostics of Helical Gear Tooth Defects. In: IncoME 2016, 30th - 31st August 2016, Manchester Conference Centre, Manchester.

Brotherton, Mark (2011) GPU Accelerated X-Ray Image Enhancement. Masters thesis, University of Huddersfield.

Brown, Leigh, Zhang, H., Blunt, Liam and Barrans, Simon (2007) Reproduction of fretting wear at the stem—cement interface in total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 221 (8). pp. 963-971. ISSN 0954-4119

Bryant, David (2010) Thermo-elastic Deformation of a Vented Brake Disc. Doctoral thesis, University of Huddersfield.

Bryant, David, Crampton, Andrew, Fieldhouse, John D. and Talbot, Chris J. (2006) Discussion of characteristics of brake judder and the necessary data acquisition system for complete analysis. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Buhafa, Adel M, Al-Nedawe, Basman, Sibley, Martin J.N. and Mather, Peter (2013) MATLAB Simulation for DiPPM over Diffuse Optical Wireless Communications. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 127-132. ISBN 9781862181212

Buhafa, Adel M and Sibley, Martin J.N. (2010) Performance of Di-code Pulse Position Modulation Technique in Diffuse Indoor Wireless Optical Communication Systems. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 188. ISBN 9781862180932

Buhafa, Adel M., Al-Nedawe, Basman M., Sibley, Martin J.N. and Mather, Peter (2014) VLC system performance using Dicode Pulse Position Modulation over an indoor diffuse link. In: 2014 22nd Telecommunications Forum (TELFOR), 25th - 27th November 2014, Belgrade, Serbia.

Buhafa, Adel Mohamed (2015) Investigation and Implementation of Dicode Pulse Position Modulation Over Indoor Visible Light Communication System. Doctoral thesis, University of Huddersfield.

Bungau, Adriana, Barlow, Roger, Shaevitz, M.H., Alonso, Jose, Bartoszek, Larry and Conrad, Janet (2015) Neutron Shielding Optimization Studies. In: Proceedings of IPAC2015. JACoW, pp. 2282-2284. ISBN 978-3-95450-168-7

Bungau, Adriana, Cywinski, R., Bungau, Cristian, Lord, J.S., Cottrell, S.P., Hillier, A.D. and Peck, J.N.T. (2016) Simulations of Muon production targets. Research Report. Science & Technology Facilities Council.

Bungau, Cristian, Bungau, Adriana, Cywinski, R., Edgecock, Thomas R., Booth, Christopher N. and Zang, Lei (2015) 5MW Power Upgrade Studies of the ISIS TS1 Target. In: Proceedings of IPAC2015. JACoW, pp. 3253-3255. ISBN 978-3-95450-168-7

Burgelman, N., Sichani, Matin Sh., Enblom, R., Berg, M., Li, Z. and Dollevoet, R. (2015) Influence of wheel-rail contact modelling on vehicle dynamic simulation. Vehicle System Dynamics, 53 (8). pp. 1190-1203. ISSN 0042-3114

Butler, Simon (2021) DNA Origami as a Foundry for Artificial Electromagnetic Materials. Doctoral thesis, University of Huddersfield.

Button, M.D., Gardiner, J.G. and Glover, Ian (2002) Measurement of the impulsive noise environment for satellite-mobile radio systems at 1.5 GHz. IEEE Transactions on Vehicular Technology, 51 (3). pp. 551-560. ISSN 0018-9545

Calvert, N.M., Sibley, Martin J.N. and Unwin, Rodney T. (1988) Experimental optical fibre digital pulse-position modulation system. Electronics letters, 24 (2). pp. 129-131. ISSN 0013-5194

Calvert, N.M., Sibley, Martin J.N., Unwin, Rodney T., Garrett, Ian and Cryan, R.A. (1989) Optimal filtering of digital PPM transmitted over optical fibrechannels. IEE Colloquium on Electronic Filters. 5/1-5/5.

Camara, Osmane (2019) Ion irradiation of germanium foils and germanium nanowires. Doctoral thesis, University of Huddersfield.

Cameli, Francesco (2021) Omni and Alga: new DSLs for audio programming and live coding. Masters thesis, University of Huddersfield.

Campbell, G.M., Fang, C. and Muhamad, I.I. (2007) On Predicting Roller Milling Performance VI. Food and Bioproducts Processing, 85 (1). pp. 7-23. ISSN 0960-3085

Campbell, G.M. and Martin, P.J. (2012) Bread aeration and dough rheology: an introduction. In: Bread Making. Food Science, Technology and Nutrition . Woodhead Publishing, pp. 299-336. ISBN 978-0-85709-060-7

Campbell, Grant M. (2003) Aerated Foods. In: Encyclopedia of Food Sciences and Nutrition. Elsevier, pp. 55-61. ISBN 978-0-12-227055-0

Campbell, Grant M. (2003) Aerated foods. In: Encyclopedia of Food Sciences and Nutrition (2nd Edition). Elsevier, pp. 55-61. ISBN 978-0-12-227055-0

Campbell, Grant M. (2003) Bread aeration. In: Bread Making. Food Science, Technology and Nutrition (92). Woodhead Publishing, pp. 352-374. ISBN 978-1-85573-712-9

Campbell, Grant M. (2007) Roller Milling of Wheat. In: Particle Breakage. Handbook of Powder Technology, 12 . Elsevier, pp. 383-419. ISBN 978-0-444-53080-6

Campbell, Grant M., Blunden-Ellis, John and Manista, Frank (2010) Encouraging engineers to read: A book-based final year assessment. Education for Chemical Engineers, 5 (4). e87-e99. ISSN 1749-7728

Campbell, Grant M. and Martin, P.J. (2012) Bread aeration and dough rheology: an introduction. In: Breadmaking: improving quality. Woodhead Publishing Series in Food Science, Technology and Nutrition . Woodhead Publishing, Cambridge, pp. 299-336. ISBN 978-0-85709-060-7

Campbell, Grant M. and Mateos-Salvador, Fernán (2008) Water and energy management in cereals processing. In: Handbook of Water and Energy Management in Food Processing. Food Science, Technology and Nutrition . Woodhead Publishing, pp. 842-862. ISBN 978-1-84569-195-0

Campbell, Grant M., Ross, Marcela and Motoi, L. (2008) Bran in Bread: Effects of Particle Size and Level of Wheat and Oat Bran on Mixing, Proving and Baking. In: Bubbles in Food 2: Novelty, Health and Luxury. Eagan Press, USA, pp. 337-354. ISBN 978-1-891127-59-5

Campbell, Grant M., Ross, Marcela and Motoi, L. (2008) Expansion Capacity of Bran-Enriched Doughs in Different Scales of Laboratory Mixers. In: Bubbles in Food 2: Novelty, Health and Luxury. Eagan Press, USA, pp. 323-336. ISBN 978-1-891127-59-5

Campbell, Grant M., Scanlon, Martin G. and Pyle, D. Leo (2008) Bubbles in Food 2: Novelty, Health and Luxury. Eagan Press, St. Paul, Minnesota, USA. ISBN 9781891127595

Campbell, Grant M., Sharp, Calum, Wall, Kevin, Mateos-Salvador, Fernán, Gubatz, Sabine, Huttly, Alison and Shewry, Peter (2012) Modelling wheat breakage during roller milling using the Double Normalised Kumaraswamy Breakage Function: Effects of kernel shape and hardness. Journal of Cereal Science, 55 (3). pp. 415-425. ISSN 0733-5210

Campbell, Grant M., Webb, Colin and KcKee, Stephen L. (1997) Cereals: Novel Uses and Processes. Springer. ISBN 978-1-4757-2675-6

Campbell, Grant M., Webb, Colin, Owens, G.W. and Scanlon, Martin G. (2012) Milling and flour quality. In: Breadmaking (2nd Edition). Food Science, Technology and Nutrition . Woodhead Publishing, pp. 188-215. ISBN 978-0-85709-060-7

Campbell, Grant M., Webb, Colin, Pandiella, Severino S. and Niranjan, Keshavan (1999) Bubbles in food. Eagan Press, St. Paul, Minnesota, USA. ISBN 1-891127-08-X

Capitanelli, Alessio, Maratea, Marco, Matrogiovanni, Fulvio and Vallati, Mauro (2017) Automated Planning Techniques for Robot Manipulation Tasks Involving Articulated Objects. In: Proceedings of the The 16th International Conference of the Italian Association for Artificial Intelligence (AI*IA 2017). Lecture Notes in Computer Science . Springer, pp. 483-497. ISBN 9783319701684

Carr, Marian (2010) Is gender stereotyping having an adverse effect on career choices in the video/ computer games industry? Masters thesis, University of Huddersfield.

Carter, G, Bailey, Paul, Armour, DG and Collins, R (1982) The deduction of continuously distributed activation energy site populations from tempering schedules. Vacuum, 32 (5). pp. 233-241. ISSN 0042-207X

Cassidy, Tracy Diane (2017) Exploring the Garment Fit paradigm from a Sustainability Perspective and its Meaning for FirstCycle and Second-Cycle Fashion Retailers. Current Trends in Fashion Technology & Textile Engineering, 1 (3).

Chahid, Younes (2021) Metrology of Additive Manufactured Lattice Structures. Doctoral thesis, University of Huddersfield.

Chai, John (2003) One-dimensional transient radiation heat transfer modeling using a finite-volume method. Numerical Heat Transfer, Part B: Fundamentals, 44 (2). pp. 187-208. ISSN 1040-7790

Chai, John (2004) Transient radiative transfer in irregular two-dimensional geometries. Journal of Quantitative Spectroscopy and Radiative Transfer, 84 (3). pp. 281-294. ISSN 0022-4073

Chai, John, Hsu, P-f and Lam, Y.C. (2004) Three-dimensional transient radiative transfer modeling using the finite-volume method. Journal of Quantitative Spectroscopy and Radiative Transfer, 86 (3). pp. 299-313. ISSN 0022-4073

Chai, John, Lee, HaeOk S. and Patankar, Suhas V. (1994) Finite volume method for radiation heat transfer. Journal of Thermophysics and Heat Transfer, 8 (3). pp. 419-425. ISSN 0887-8722

Chai, John, Lee, HaeOk S. and Patankar, Suhas V. (1994) Improved Treatment of Scattering Using the Discrete Ordinates Method. Journal of Heat Transfer, 116 (1). pp. 260-263. ISSN 0022-1481

Chai, John, Lee, HaeOk S. and Patankar, Suhas V. (1993) Ray Effect and False Scattering in the Discrete Ordinates Method. Numerical Heat Transfer, Part B: Fundamentals, 24 (4). pp. 373-389. ISSN 1040-7790

Chai, John, Lee, HaeOk S. and Patankar, Suhas V. (1994) Treatment of irregular geometries using a cartesian coordinates finite-volume radiation heat transfer procedure. Numerical Heat Transfer, Part B: Fundamentals, 26 (2). pp. 225-235. ISSN 1040-7790

Chai, John, Parthasarathy, Girija, Lee, HaeOk S. and Patankar, Suhas V. (1995) Finite volume radiative heat transfer procedure for irregular geometries. Journal of Thermophysics and Heat Transfer, 9 (3). pp. 410-415. ISSN 0887-8722

Chai, John and Patankar, Suhas V. (1993) Laminar Natural Convection in Internally Finned Horizontal Annuli. Numerical Heat Transfer, Part A: Applications, 24 (1). pp. 67-87. ISSN 1040-7782

Chai, John, Patankar, Suhas V. and Lee, HaeOk S. (1994) Evaluation of spatial differencing practices for the discrete-ordinates method. Journal of Thermophysics and Heat Transfer, 8 (1). pp. 140-144. ISSN 0887-8722

Chakraborty, A., Mishra, Rakesh and Majumdar, B. (2007) A computational approach to analyze the flow pattern in a Y-Duct due to different manoeuvring conditions. In: International Aerospace CFD Conference, 18th-19th June, 2007, Paris, France.

Chang, W.L., Luo, Xichun, Ritchie, J.M., Sun, J.N. and Mark, C. (2011) Fabrication of microfluidic injection moulds by a hybrid micromachining process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (3). pp. 458-462. ISSN 0954-4054

Chang, Wen Long, Luo, Xichun, Zhao, Qi Ling, Sun, Ji Ning and Zhao, Yi (2011) Laser Assisted Micro Grinding of High Strength Materials. Key Engineering Materials, 496. pp. 44-49. ISSN 1662-9795

Chang, Wenlong, Luo, Xichun, Ritchie, James M., Sun, Jining and Mack, Christopher (2011) Laser deburring process for structured edges on precision moulds. International Journal of Nanomanufacturing, 7 (3/4). pp. 327-335. ISSN 1746-9392

Chang, Wenlong, Sun, Jining, Luo, Xichun, Ritchie, James M. and Mack, Chris (2011) Investigation of microstructured milling tool for deferring tool wear. Wear, 271 (9-10). pp. 2433-2437. ISSN 0043-1648

Changqi, Xu, Zhengbai, Lin and Chen, Xun (1985) Three dimensional dynamometer for cylindrical grinding. Journal of fuzhou University (3). pp. 82-97. ISSN 1000-2243

Charitopoulos, Romanos and Sibley, Martin J.N. (2009) Experimental coder/decoder of dicode pulse position modulation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 124-129. ISBN 9781862180857

Charitopoulos, Romanos and Sibley, Martin J.N. (2006) Power Spectral Density of Dicode Pulse Position Modulation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-5.

Charlesworth, Martin (2012) Promoting the use of Classroom Response Systems. In: Learning with Mobile Technologies, Handheld Devices, and Smart Phones: Innovative Methods. IGI Global, pp. 187-201. ISBN 9781466609365

Charlton, Matthew (2014) Cost Effective Manufacturing and Optimal Design of X-Stream Trims for Severe Service Control Valves. Masters thesis, University of Huddersfield.

Charlton, P. and Blunt, Liam (2006) CNC manufacturing to improve hip and knee joint replacement lifetimes. In: ICMR 2006, 5th - 7th September 2006, Liverpool, UK.

Charlton, P. and Blunt, Liam (2007) Surface and form metrology of polished “freeform” biological surfaces. Wear, 264 (5-6). pp. 394-399. ISSN 0043-1648

Charlton, P., Blunt, Liam and Beaucamp, A. (2005) Machining of "freeform" biological surfaces on an advanced 7-axis CNC polishing machine. In: International Conference on Precision Machining, ICPM 2005, 2005, Vienna, Austria. (Unpublished)

Chatfield, Darius Alexander Johnston (2017) Techniques for Virtual Instrument Development. Masters thesis, University of Huddersfield.

Che, X. and Griffin, James Marcus (2007) Grinding acoustic emission classification in terms of mechanical behaviours. Key Engineering Materials, 329. pp. 15-20. ISSN 1013-9826

Che, Y., Long, Hua, Lu, Joan and Yip, Yau Jim (2007) An Investigation in Self-Similar Study and Implication of 3G Mobile Traffic. In: The 2007 World Congress in Computer Science, Computer Engineering, & Applied Computing, 25 - 28th June, 2007, Las Vegas, Nevada, USA.

Chen, X.Y., Toh, K.C., Chai, John and Yang, C. (2004) Developing pressure-driven liquid flow in microchannels under the electrokinetic effect. International Journal of Engineering Science, 42 (5). pp. 609-622.

Chen, Xun (1996) Analysis and simulation of the grinding process. Part I: Generation of the grinding wheel surface. International Journal of Machine Tools and Manufacture, 36 (8). pp. 871-882. ISSN 0890-6955

Chen, Xun (1996) Analysis and simulation of the grinding process. Part II: Mechanics of grinding. International Journal of Machine Tools and Manufacture, 36 (8). pp. 883-896. ISSN 0890-6955

Chen, Xun (1996) Analysis and simulation of the grinding process. Part III: Comparison with experiment. International Journal of Machine Tools and Manufacture, 36 (8). pp. 897-906. ISSN 0890-6955

Chen, Xun (1998) Analysis and simulation of the grinding process. Part IV: Effects of wheel wear. International Journal of Machine Tools and Manufacture, 38 (1-2). pp. 41-49. ISSN 0890-6955

Chen, Xun (2000) Analysis of the transitional temperature for tensile residual stress in grinding. Journal of Materials Processing Technology, 107 (1-3). pp. 216-221. ISSN 0924-0136

Chen, Xun (2009) Fundamental Study of Corrective Abrasive Machining Technology. In: CIRP UK Meeting, 8th May 2009. (Unpublished)

Chen, Xun (1998) Life cycle model of the grinding process. Computers in Industry, 36 (1-2). pp. 5-11. ISSN 0166-3615

Chen, Xun (2002) Precision grinding using CBN wheels. International Journal of Machine Tools and Manufacture, 42 (5). pp. 585-593. ISSN 0890-6955

Chen, Xun, Allanson, D.R., Thomas, A, Moruzzi, J and Rowe, W. Brian (1994) Simulation of feed cycles for grinding between centres. International Journal of Machine Tools and Manufacture, 34 (5). pp. 603-616. ISSN 0890-6955

Chen, Xun, Feng, Zhi Jing and Pashby, I.R. (2004) Comparison of Laser Cleaning of A1(2)O(3) and CBN Grinding Wheels. Key Engineering Materials, 257-25. pp. 365-370. ISSN 1662-9795

Chen, Xun, Feng, Zhi Jing and Pashby, I.R. (2004) A study on laser cleaning of A1(2)O(3)grinding wheels. Key Engineering Materials, 257-25. pp. 359-364. ISSN 1662-9795

Chen, Xun and Griffin, James Marcus (2007) The Classification of rubbing, ploughing and cutting during grinding and the comparison of different evolutionary inspired classification techniques. In: 40th CIRP International Seminar on Manufacturing Systems, 30th May - 1st June 2007, Liverpool, UK. (Unpublished)

Chen, Xun and Griffin, James Marcus (2009) Grinding Burn and Chatter Classification Using Genetic Programming. Key Engineering Materials, 389-39. pp. 90-95. ISSN 1662-9795

Chen, Xun and Griffin, James Marcus (2007) Grinding acoustic emission classification in terms of mechanical behaviours. Key Engineering Materials, 329. pp. 15-20. ISSN 1662-9795

Chen, Xun and Griffin, James Marcus (2008) Grinding burn and chatter classification using genetic programming. Key Engineering Materials, 389-39. pp. 90-95. ISSN 1013-9826

Chen, Xun, Griffin, James Marcus and Liu, Qiang (2007) Mechanical and thermal behaviours of grinding acoustic emission. International Journal of Manufacturing Technology and Management, 12 (1/2/3). pp. 184-199. ISSN 1368-2148

Chen, Xun and Limchimchol, Thitikorn (2007) Grinding chatter monitoring using least square support vector machine. In: International Symposium on Advances in Abrasive Technology (ISAAT 2007), 26th - 28th Septmeber 2007, Dearborn, Michigan, USA. (Unpublished)

Chen, Xun and Limchimchol, Thitikorn (2006) Monitoring Grinding Wheel Redress-life Using Support Vector Machines. International Journal of Automation and Computing, 3 (1). pp. 56-62. ISSN 1476-8186

Chen, Xun, Liu, Q.S. and Gindy, Nabil (2005) Signal Analysis of Acoustic Emission for Laser Imitating Grinding Burn. Key Engineering Materials, 291-29. pp. 91-96. ISSN 1662-9795

Chen, Xun, Rowe, W. Brian, Allanson, D.R. and Mills, B. (1999) A Grinding Power Model for Selection of Dressing and Grinding Conditions. Journal of Manufacturing Science and Engineering, 121 (4). pp. 632-637. ISSN 1087-1357

Chen, Xun and Zhengbai, Lin (1989) Probe into the Characteristics of Grinding Wheel Wear. Journal of fuzhou University, 17 (2). pp. 70-75. ISSN 1000-2243

Chen, Z., Wang, T., Zhao, Z., Shen, J., Zhen, D. and Gu, Fengshou (2012) The Lightweight Design of a Dump Truck Frame based on Dynamic Responses. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. IEEE, Loughborough, UK, pp. 1-5. ISBN 978-1-4673-1722-1

Childs, Mark, Rothery, Andrew, Smith, Kelly and Bell, Viv (2006) Digital Repositories - the next big thing or another failed learning technology? In: ALT-C 2006, 4th - 7th September 2006, Edinburgh. (Unpublished)

Chin, N.L. and Campbell, Grant M. (2005) Effects of mixing speed and work input on dough development and aeration. In: Proceedings of the 12th International ICC Cereal and Bread Congress. Food Science, Technology and Nutrition . Woodhead Publishing, pp. 174-179. ISBN 978-1-84569-479-1

Chin, N.L., Campbell, Grant M. and Thompson, F. (2005) Characterisation of bread doughs with different densities, salt contents and water levels using microwave power transmission measurements. Journal of Food Engineering, 70 (2). pp. 211-217. ISSN 0260-8774

Chin, N.L., Martin, P.J. and Campbell, Grant M. (2004) Aeration During Bread Dough Mixing: I. Effect of Direction and Size of a Pressure Step-change During Mixing on the Turnover of Gas. Food and Bioproducts Processing, 82 (4). pp. 261-267. ISSN 0960-3085

Chin, Nyuk L and Campbell, Grant M. (2005) Dough aeration and rheology: Part 1. Effects of mixing speed and headspace pressure on mechanical development of bread dough. Journal of the Science of Food and Agriculture, 85 (13). pp. 2184-2193. ISSN 0022-5142

Chin, Nyuk L and Campbell, Grant M. (2005) Dough aeration and rheology: Part 2. Effects of flour type, mixing speed and total work input on aeration and rheology of bread dough. Journal of the Science of Food and Agriculture, 85 (13). pp. 2194-2202. ISSN 0022-5142

Chin, Nyuk L, Martin, Peter J and Campbell, Grant M. (2005) Dough aeration and rheology: Part 3. Effect of the presence of gas bubbles in bread dough on measured bulk rheology and work input rate. Journal of the Science of Food and Agriculture, 85 (13). pp. 2203-2212. ISSN 0022-5142

Chiotellis, E. and Campbell, Grant M. (2003) Proving of Bread Dough I: Modelling The Evolution of the Bubble Size Distribution. Food and Bioproducts Processing, 81 (3). pp. 194-206. ISSN 0960-3085

Chiotellis, E. and Campbell, Grant M. (2003) Proving of Bread Dough II: Measurement of Gas Production and Retention. Food and Bioproducts Processing, 81 (3). pp. 207-216. ISSN 0960-3085

Chirvase, Cezarina Isabela (2019) Clinical feasibility of in-room proton radiography using single detector. Doctoral thesis, University of Huddersfield.

Chitchyan, Ruzanna, Betz, Stefanie, Duboc, Leticia, Penzenstadler, Birgit, Easterbrook, Steve, Ponsard, Christophe and Venters, Colin (2015) Evidencing Sustainability Design through Examples. In: Fourth International Workshop on Requirements Engineering for Sustainable Systems (RE4SuSy), 24th August 2015, Ottawa, Canada.

Choi, Tacksung, Yoon, Sungyong, Lee, Hyunkook, Hwang, Junghwan, Kim, Dongseok, Jeon, Byeongmoon and Sung, Jaewon (2014) Image display apparatus and method for operating the same. US8665321.

Chrysikos, Alexandros (2013) Improving Student Retention in UK Higher Education Institutions; The potential of using Knowledge as a Service (KaaS). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 61-66. ISBN 9781862181212

Chrysikos, Alexandros, Ahmed, Ejaz and Ward, Rupert (2017) Analysis of Tinto’s student integration theory in first year undergraduate computing students of a UK Higher Education Institution. International Journal of Comparative Education and Development, 19 (2/3). pp. 97-121. ISSN 2309-4907

Chueng, Priscilla and Marsden, Philip H. (2003) Designing auditory spaces: the role of expectation. In: Human-Computer Interaction: Theory and Practice (part 1). Human Factors and Ergonomics, Vol 1 . CRC Press, pp. 616-620. ISBN 9780805849301

Chuku, Difference (2021) A NOVEL STRUCTURAL MONITORING SYSTEM BASED ON A LOW-COST DISPLACEMENT SENSING TECHNIQUE AND IN-SITU CALIBRATION. Doctoral thesis, University of Huddersfield.

Clarke, David, Bowler, Marion, Fell, Barry, Flaherty, John, Grant, Alan, Jones, Gareth, Martin-fernandez, Maria Luisa, Shaw, David, Todd, Brian, Wallace, Bonnie and Towns-Andrews, Elizabeth (2000) A high aperture beamline for vacuum ultraviolet circular dichroism on the SRS. Synchrotron Radiation News, 13 (2). pp. 21-27. ISSN 0894-0886

Clarke, Jade and Lee, Hyunkook (2016) The Effects of Decreasing the Magnitude of Elevationdependent notches in HRTFs on Median Plane Localisation. In: Interactive Audio Systems Symposium 2016, 23rd September 2016, University of York.

Clarke, Michael, Dufeu, Frédéric and Manning, Peter (2014) Barry Truax Riverrun (1986/2004), a case study from the TaCEM project, exploring new approaches to techniques of analysis and re-synthesis in the study of concert electroacoustic works. In: Electroacoustic Music Studies Network Conference Electroacoustic Music Beyond Performance,, 10th - 14th June 2014, Berlin, Germany.

Clarke, Michael, Dufeu, Frédéric and Manning, Peter (2014) Deriving a Chart-Organised Notation from a Sonogram Based Exploration: TIAALS (Tools for Interactive Aural Analysis). In: Interactive Music Notation and Representation workshop, 14th International Conference on New Interfaces for Musical Expression (NIME 2014), 30th June 2014, Goldsmiths, University of London, London, UK. (Unpublished)

Clarke, Michael, Dufeu, Frédéric and Manning, Peter (2015) Interactive tools for the study of electroacoustic music composition methods: resources for teaching and learning from the TaCEM software. In: Innovative Tools and Methods to Teach Music and Signal Processing Conference, 2nd November 2015, Saint-Étienne, France. (Unpublished)

Clarke, Michael, Dufeu, Frédéric and Manning, Peter (2014) The Significance of Technical Research in the Study of Electroacoustic Music: A Perspective from the TaCEM Project. In: Royal Musical Association 50th Annual Conference, 4th - 6th September 2014, Leeds, UK. (Unpublished)

Clarke, Michael, Dufeu, Frédéric and Manning, Peter (2015) The TaCEM Project: Technology and Creativity in Electroacoustic Music. In: Being Human. A festival of the humanities, Humanising Music Technology, 16th November 2015, Kingston University, London, UK. (Unpublished)

Clarke, Michael, Dufeu, Frédéric and Manning, Peter (2015) TaCEM: Technology and Creativity in Electroacoustic Music. In: National Association for Music in Higher Education (NAMHE) Annual Conference: Music – Learning – Technology, 5th May 2015, Glasgow, Scotland. (Unpublished)

Clarke, Michael, Dufeu, Frédéric and Manning, Peter (2015) Technology and Creativity in Music for Real-Time Electronics: An interactive approach to Philippe Manoury and Cort Lippe’s works. In: Ircam Forum Workshop, 25th November 2015, Paris, France.

Clarke, Michael, Dufeu, Frédéric and Manning, Peter (2013) Tracking Creativity and Investigating Technology in Electroacoustic Music: Methods and perspectives of the TaCEM project. In: Tracking the Creative Process in Music (TCPM), 10th - 12th October 2013, Montreal, Canada. (Unpublished)

Clarke, Michael, Dufeu, Frédéric and Manning, Peter (2013) Working with the TIAALS Software. In: Ircam Forum Workshop, 20th - 22nd November 2013, Paris, France. (Unpublished)

Clements, Iain, Watson, J. and Xu, Zhijie (2003) Solutions to improve retention in virtual learning environments. In: Association for Information Technology in Teacher Education 2003 Annual Conference Programme and Abstracts. Learning Matters, pp. 12-15. ISBN 978-0954282127

Clements, Iain, Xu, Zhijie and Watson, Jason (2003) Extending SCORM metadata layers for enhancing on-line interactive learning. In: 2nd European Conference on E-Learning Glasgow Caledonian University, Glasgow, 6-7 November 2003. Academic Conferences Limited, pp. 105-114. ISBN 9780954457747

Clough, David A, Fletcher, Simon and Longstaff, Andrew P. (2010) Non-contact measurement and analysis of machine tool spindles. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 189. ISBN 9781862180932

Cochrane, W. A., Luo, Xichun, Lim, T., Taylor, W. D. and Schnetler, H. (2012) Design of a Micro-Autonomous Robot for Use in Astronomical Instruments. International Journal of Optomechatronics, 6 (3). pp. 199-212. ISSN 1559-9612

Codinhoto, Ricardo, Koskela, Lauri, Kagioglou, Mike, Aouad, Ghassan, Baldry, D., Tzortzopoulos, Patricia, Siriwardena, Mohan and Sapountzis, Stelios (2006) How Lean principles can be applied to the development process of educational programs? Project Report. University of Salford.

Codinhoto, Ricardo, Koskela, Lauri, Tzortzopoulos, Patricia and Kagioglou, Mike (2006) How Analysis and Synthesis Have Been Understood in Design. In: Proceedings of IGLC 14: 14th Annual Conference of the International Group for Lean Construction. IGLC, pp. 121-134.

Colley, Gareth, Mishra, Rakesh, Rao, H.V. and Woolhead, R. (2009) Performance evaluation of three cross flow vertical axis wind turbine configurations. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 130-136. ISBN 9781862180857

Colligon, John and Vishnyakov, Vladimir (2015) Applications of Energy-Assistance to the formation of novel surface coatings. Innovation into Success (17). pp. 65-68.

Conlon, Jo (2017) Connecting students, alumni and employers?: there’s an app for that. NiTRO, the online publication of the Australian Council of Deans and Directors of Creative Arts (9).

Conlon, Jo (2016) Product Life-cycle Management. In: A Circular Economy Handbook for Business and Supply Chains: Repair, Remake, Redesign, Rethink. Kogan Page, pp. 278-282. ISBN 978-0749476755

Conlon, Jo and Narayanaswamy, Srilakshmi (2017) A vision for the future using Product Lifecycle Management (PLM) as a platform for operational excellence and business transformation. In: The Circular Economy from a Fashion and Textiles Perspective, 15th June 2017, University of Huddersfield, UK. (Unpublished)

Conlon, Jo and Taylor, Andrew (2017) Collaborate into the Future: Connecting design and business practice with Product Life-cycle Management (PLM). In: School of Art, Design & Architecture Teaching & Learning Conference: Making a Impact - 2017, 10th January 2017, University of Huddersfield Business School. (Unpublished)

Conlon, Jo and Taylor, Andrew (2016) The Future is Always Now; Evolving Life-cycles in Fashion. WhichPLM (an independent digital magazine).

Conlon, Jo and Taylor, Andrew (2012) Innovating the collaborative future of global fashion business. In: Designs on E-Learning International Conference - Cloud and Crowd: Towards a collaborative future, 7th September 2012, University of the Arts, London.. (Unpublished)

Conlon, Jo and Taylor, Andrew (2017) LinkedIn groups in higher education - Maximising community benefits for students & alumni in fashion & textiles: Establishing a tool-kit. In: School of Art, Design & Architecture Teaching and Learning Conference 2017: Making an Impact, 10th January 2017, University of Huddersfield. (Unpublished)

Conlon, Jo and Taylor, Andrew (2016) Radicalising your Lifecycle’s full potential with PLM. In: Radicalising your Lifecycle’s full potential with PLM, 21st June 2016, University of Huddersfield. (Unpublished)

Conway, Benjamin (2021) Estimating positional thermal errors in a ballscrew feed-drive system from discrete ballscrew temperature measurements. Doctoral thesis, University of Huddersfield.

Cornish, Matthew T. and Wakefield, Jonathan P. (1996) Automatically Locating an Area of interest and Maintaining a Reference Image to Aid the Real-Time Tracking of Objects. In: British Machine Vision Conference, 1996, University of Edinburgh.

Cowton, Christopher J. (2006) Editorial: Online production tracking through Author Services. Business Ethics: A European Review, 15 (3). p. 217. ISSN 1467-8608

Crabtree, John Simon (2022) Instruments of Division: The Role of Audio Technology in the Transition From the Weimar Republic to the Nazi State. Doctoral thesis, University of Huddersfield.

Crabtree, Michael Anthony (2009) Industrial flow measurement. Masters thesis, University of Huddersfield.

Crampton, Andrew, Fieldhouse, John D., Talbot, Chris J. and Steel, William P. (2003) Modeling disc brake noise using spectral methods. In: 5th EUROMECH Solid Mechanics Conference, 17-22 August 2003, AUT, Thessaloniki, GREECE. (Unpublished)

Crawford-Emery, Ryan and Lee, Hyunkook (2014) The subjective effect of BRIR length perceived headphone sound externalisation and tonal colouration. In: 136th Audio Engineering Society Convention, 26th-29th April 2014, Berlin, Germany. (Unpublished)

Crawley, Jim (2009) Much technology, but limited impact: what progress has been made with Learning Technology in the Post Compulsory Education and Training (PCET) sector? Teaching in lifelong learning: a journal to inform and improve practice, 1 (1). pp. 43-50. ISSN 2040-0993

Cregan, Vincent and Lee, William (2017) Slow and fast diffusion in a lead sulphate gravity separation process. Journal of Physics: Conference Series, 811 (1). ISSN 1742-6588

Cresswell, S.N. and McCluskey, T.L. (2005) A Hospital Placement Allocation Problem. Proceedings of the Annual PLANSIG Conference. ISSN 1368-5708

Crumlish, Sean (2018) What can an Artistic Sensibility Bring to the Design & Production of Braille, & What Role Might UV Flatbed Printing Play in This? Masters thesis, University of Huddersfield.

Cryan, R.A. (1999) Communication systems. Post-Doctoral thesis, University of Huddersfield.

Cryan, R.A. and Sibley, Martin J.N. (2006) Minimising intersymbol interference in optical-fibre dicode PPM systems. IEE Proceedings - Optoelectronics, 153 (3). pp. 93-100. ISSN 1350-2433

Cryan, R.A. and Sibley, Martin J.N. (2006) Multiple pulse position modulation employing raised cosine filtering. IEE Proceedings - Optoelectronics, 153 (4). pp. 205-211. ISSN 1350-2433

Cryan, R.A. and Sibley, Martin J.N. (2006) Optical fibre PPM using a PIN-FET receiver and central decision detection. Microwave and optical technology letters, 48 (4). pp. 791-794. ISSN 0895-2477

Cryan, R.A., Unwin, Rodney T., Garrett, Ian, Sibley, Martin J.N. and Calvert, N.M. (1990) Optical fibre digital pulse-position-modulation assuming a Gaussian received pulse shape. IEE Proceedings - Optoelectronics, 137 (2). pp. 89-96. ISSN 0267-3932

Cryan, R.A., Unwin, Rodney T., Massarella, Alistair J. and Sibley, Martin J.N. (1991) Coherent detection: n-ary PPM versus PCM. Proceedings of SPIE, 1372. pp. 64-71. ISSN 0277-786X

Cryan, R.A., Unwin, Rodney T., Massarella, Alistair J. and Sibley, Martin J.N. (1990) Digital PPM employing temporal solitons. IEE Colloquium on Non-Linear Effects in Fibre Communications. 14/1-14/5.

Cryan, R.A., Unwin, Rodney T., Massarella, Alistair J., Sibley, Martin J.N. and Garrett, Ian (1992) A comparison of coherent digital PPM with PCM. European Transactions on Telecommunications, 3 (4). pp. 331-340. ISSN 1124-318X

Cunningham, J., Xu, Qiang and Ford, Derek G. (2002) A case study on practical error correction practices utilised on a CNC machine tool. In: Advances in Manufacturing Technology XVI. Wiley, pp. 361-366. ISBN 9781860583780

Cusack, Ashley (2021) Applying Artificial Intelligence Planning to Optimise Heterogeneous Signal Processing for Surface and Dimensional Measurement Systems. Doctoral thesis, University of Huddersfield.

Daghestani, L., Ward, Robert D., Xu, Zhijie and Al-Nuaim, H. (2008) The Design, Development and Evaluation of Virtual Reality Learning Environment for Elementary Numeracy Concepts through 3D Virtual Manipulative. In: Proceedings of the 2008 Fifth International Conference on Computer Graphics, Imaging and Visualisation. IEEE Computer Society Washington, DC, USA, Washington, USA, pp. 93-100. ISBN 978-0-7695-3359-9

Dai, Xuewu, Sasloglou, Konstantinos, Atkinson, Robert, Strong, John, Panella, Isabella, Yun Cai, Lim, Mingding, Han, Chee Wei, Ang, Glover, Ian, Mitchell, John E., Schiffers, Werner and Dutta, Partha S. (2012) Wireless Communication Networks for Gas Turbine Engine Testing. International Journal of Distributed Sensor Networks, 2012. pp. 1-18. ISSN 1550-1329

Dales, Mark (2018) Wind Turbine Emulation Based on the Accurate Control of Servomotors. Doctoral thesis, University of Huddersfield.

Dalgarno, K.W., Stewart, T.D. and Allport, John (2001) Layer manufactured production tooling incorporating conformal heating channels for transfer moulding of elastomer compounds. Plastics, Rubber and Composites, 30 (8). pp. 384-388. ISSN 1465-8011

Dani, Samir (2016) Has the barcode reached its ‘use by’ date? The Conversation. ISSN 2044-5032

Daraz, Alsadak Aboubaker Salem (2021) CONDITION MONITORING OF CENTRIFUGAL MACHINERY BASED ON ADVANCED DATA ANALYTIC TECHNIQUES AND MULTIPLE DATA SOURCES. Doctoral thesis, University of Huddersfield.

Darbari, F., Glover, Ian and Stewart, R. W. (2007) Channel and Interference Analysis for Wireless Sensor Networks. In: 2007 IEEE International Conference on Communications. IEEE, pp. 3289-3294. ISBN 9781424403530

Darbari, Faisal, Glover, Ian and Stewart, Robert W. (2008) Transmission loss measurements and modeling for short range wireless sensor networks. In: The Institution of Engineering and Technology Conference on Wireless, Mobile and Multimedia Networks. IEEE, pp. 219-222. ISBN 9780863418877

Darbari, Faisal, Sasloglou, Konstantinos, Stewart, Robert W., Glover, Ian and Andonovic, Ivan (2008) Effect of antenna height and polarisation on short wireless links. In: 16th European Signal Processing Conference (EUSIPCO 08), 25-29th August 2008, Lausanne, Switzerland. (Unpublished)

Darbari, Faisal, Stewart, R. W. and Glover, Ian (2008) Narrow-band short-range channel measurements. In: General Assembley of the International Union of Radio Science, 7-16th August 2008, Hyatt Regency Chicago Hotel, Chicago, Illinois. (Unpublished)

Darbari, Faisal, Stewart, Robert W. and Glover, Ian (2010) MIMO Channel Modelling. In: Signal Processing. InTech. ISBN 978-953-7619-91-6

Darbari, Faisal, Stewart, Robert W. and Glover, Ian (2007) Physical Layer Modelling for Short Range Wireless Sensor Network. In: URSI Symposium, 2-3rd July 2007, University of Portsmouth. (Unpublished)

Darbari, Faisal, Stewart, Robert W. and Glover, Ian (2011) A Solution for Broadband Access for Rural Communities Using a Cost and Power Efficient Technology. In: Festival of radio science, 12th January 2011, University of Leicester. (Unpublished)

Davies, J., Dixon, R., Goodall, Roger M. and Steffen, T. (2014) Multi-Agent Control of High Redundancy Actuation. International Journal of Automation and Computing, 11 (1). pp. 1-19. ISSN 1476-8186

Davis, Lee (2016) The effect of stimuli and angles on the perception of echo thresholds. Masters thesis, University of Huddersfield.

Day, A.J., Allport, John, Fischer, W.P., Coates, P. and Mimaroglu, A. (1993) Finite element modelling of polymer deformation processes. In: AQUABUS User's Conference 1993, June 1993, Rhode Island, USA.

De Boni, Marco and Prigmore, Martyn (2002) Cultural aspects of internet privacy. In: UKAIS Conference 2002, 10th-12th April 2002, Leeds, UK. (Unpublished)

De Boni, Marco and Prigmore, Martyn (2004) A Hegelian basis for privacy as an economic right. Contemporary Political Theory, 3 (2). pp. 168-187. ISSN 1470-8914

De Boni, Marco and Prigmore, Martyn (2003) Privacy and the information economy. In: IADIS International Conference e-Society 2003, 3-6 June 2003, Lisbon, Portugal. (Unpublished)

De Boni, Marco and Prigmore, Martyn (2001) A hegelian basis for information privacy as an economic right. In: Information Systems in the Digital World: Proceedings of the 6th UKAIS Conference University of Portsmouth 18-20 April 2001. Zeus Press, London, UK. ISBN 978-0954070502

De Luca, Damian and Taylor, Ruth (2013) Interactives for generation xbox. Museum & Heritage magazine, Autumn (2013). pp. 36-37. ISSN 2051-8463

De Luca, Damian, Taylor, Ruth and Prigmore, Martyn (2013) Models for Academic Entrepreneurship Canalside Studios case study. In: University-Industry Interaction Conference, 28-29 May 2013, Amsterdam, The Netherlands.

De Silva, M. Kushani K K (2020) Internet-Enabled Digital Technology in Tsunami Early Warning (TEW): Gender Equity in Perspective. Doctoral thesis, University of Huddersfield.

De Vos, Z, Johnson, T and Gibson, Ian (2016) Hallers Routine. In: Adaptive Music Technology Research Group Concert, 24 Feb 2016, Bates Mill, Huddersfield.

Dean, Lionel Theodore, Atkinson, Paul and Unver, Ertu (2005) FutureFactories : inverting the mass-production paradigm. In: Autonomatic, 28th January 2005, Design Centre at Tremough, Falmouth College of Arts, Cornwall.

Dean, Lionel Theodore, Unver, Ertu, Campbell, Ian and De Beer, Deon (2012) Making it real: virtual tools in 3D creative practice. In: Making: an International Conference on Materiality and Knowledge. Book of Abstracts . NordFo, Nordic Research Network, Notodden, Norway, p. 76.

Dehe, Benjamin, Bamford, David and Bamford, Jim (2011) An Application of a MCDA Model for Healthcare Site Selection. In: 22nd Annual Production and Operations Management Society (POMS) Conference 2011, April 29th-May 2nd 2011, Reno, Nevada, USA.

Dehe, Benjamin, Bamford, David and Bamford, Jim (2011) An implementation of quality tools and techniques in the planning of healthcare infrastructure. In: 22nd Annual Production and Operations Management Society (POMS) Conference 2011, April 29th-May 2nd 2011, Reno, Nevada, USA.

Dehe, Benjamin, Bamford, David and Olaniyan, Olatunbosun (2017) Sport Analytics Utilization in The Sport Industry: A Structured Literature Review. In: POMS 2017, 28th Annual Conference, May 5 - 9, Seattle, WA. (Unpublished)

Deka, Rabin, Singh, B and Glover, Ian (1992) A two-pass TMS320C25 for the Motorola EXORMacs. Microprocessors and Microsystems, 16 (3). pp. 133-140. ISSN 0141-9331

Delzendeh, Elham, Wu, Song, Lee, Angela and Zhou, Ying (2017) The impact of occupants’ behaviours on building energy analysis: A research review. Renewable and Sustainable Energy Reviews, 80. pp. 1061-1071. ISSN 1364-0321

Dennis, Karen (2011) Global Denim Project. [Artefact]

Dennis, Karen (2011) Passion for Fashion : Recycling Clothes for Financial Inclusion. In: Passion for Fashion, 2011 - 2013, Leeds and Huddersfield. (Submitted)

Dennis, Karen (2003) The Role of the Designer in Sustainable Development. In: Design and Manufacture for Sustainable Development. Professional Engineering Publishing, Cambridge, UK. ISBN 1-86058-427-6

Denton, Paul (2002) Business Strategy Driven IT Systems For Engineer-To-Order and Make-To-Order Manufacturing Enterprises. Doctoral thesis, Loughborough University.

Denton, Paul (2005) Business Strategy Driven Information Technology Systems. In: Proceedings of the 18th ICPR: The Networked Enterprise, July 31-August 4 2005, Fisciano, Italy.

Denton, Paul (2005) An Enterprise Engineering Approach for Supply Chain Systems Design and Implementation. In: Proceedings of SCMIS2005: 3rd International Workshop on Supply Chain Management and Information Systems, 6th - 8th July 2005, Thessaloniki, Greece.

Denton, Paul (2006) Promoting Digital Business Growth. Yorkshire Business Insider, 4 (2).

Denton, Paul and Hodgson, A. (1999) Can SMEs Afford MRP? In: ICPR-15 Manufacturing for a global market. Dept. of Manufacturing and Operations Engineering, University of Limerick, Limerick, Ireland, pp. 735-738. ISBN 9781874653561

Denton, Paul and Hodgson, A. (1997) Implementing Strategy-Led BPR in a Small Manufacturing Company. In: Proceedings of the 5th International Conference on Factory 2000, 2nd - 4th April 1997, Cambridge, UK.

Denton, Paul and Hodgson, A. (1997) Systems Development for Global Manufacturing. In: Proceedings of the 5th International Conference on Factory 2000, 2nd - 4th April 1997, Cambridge, UK.

Denton, Paul, Hodgson, A. and Hreczuk-Hirst, I. A. (1999) Implementing Intranet Support for BPR in a Small Manufacturing Company. In: ICPR-15 Manufacturing for a global market. Dept. of Manufacturing and Operations Engineering, University of Limerick, Limerick, Ireland, pp. 739-742. ISBN 9781874653561

Denton, Paul, Little, David, Weston, R.H and Guerrero, A. (2007) An enterprise engineering approach for supply chain systems design and implementation. International Journal of Services and Operations Management, 3 (2). pp. 131-151. ISSN 1744-2370

Denton, Paul and McKinna, Alastair (2009) Open Innovation in Global Manufacturing Supply Chains. In: Institute of Engineering and Technology, Invited Prestige Lecture, 25 March 2009, University of Huddersfield. (Unpublished)

Denton, Paul and Short, C. (2004) Rapid Product Development Evaluation Report. Project Report. Intelligent Manufacturing Systems Consortium.

Denton, Paul and Tan, Kim H. (2007) Revisiting the Value Proposition of E-Marketplace Connectivity. In: Developing Sustainable Collaborative Supply Chains, Proceedings of the 12th International Symposium on Logistics, Budapest, Hungary, 8-9 July 2007. Nottingham University Business School, Nottingham, pp. 383-389.

Denton, Paul, Tan, Kim H., Hajjaji, Mufeed and Bashir, Abid (2010) Chemical Industry Supply Chain Innovation: A Case Study of e-Enablement Practice. In: Proceedings of the 16th International Working Seminar on Production Economics, Congress Innsbruck, Innsbruck, Austria, 1-5 March 2010. [Unkown], pp. 135-146.

Denton, Paul, Tan, Kim H. and Yoshie, O. (2007) Open Innovation in Global Manufacturing Supply Chains: Opportunities for the Future. Project Report. Daiwa Anglo-Japanese Foundation. (Submitted)

Desforges, M J, Jacob, P J and Ball, Andrew (2000) Fault detection in rotating machinery using kernel-based probability density estimation. International Journal of Systems Science, 31 (11). pp. 1411-1426. ISSN 0020-7721

Dew, Niall (2008) Initial reactions to the distribution of mobile devices to learning disability students for use in practice settings. In: NET 2008, Tuesday 2 – Thursday 4 September 2008, Cambridge, UK.

Dew, Niall (2008) Mobile Learning on the Campus and Beyond. In: Teaching & Learning Conference 2008: Enhancing Learning: Technology by Design, 15th September 2008, University of Huddersfield.

Dew, Niall (2008) Student Interaction with Mobile Technologies. In: ALT-C 2008 Pre-Conference Workshop, 8th September 2008, Leeds, UK. (Unpublished)

Dewey, Christopher and Wakefield, Jonathan P. (2016) Audio interfaces should be designed based on data visualisation first principles. In: Proceedings of the 2nd AES Workshop on Intelligent Music Production. Audio Engineering Society.

Dewey, Christopher and Wakefield, Jonathan P. (2017) Formal usability evaluation of audio track widget graphical representation for two-dimensional stage audio mixing interface. In: AES 142nd International Conference, 20th-23rd May 2017, Berlin, DE.

Dewey, Christopher and Wakefield, Jonathan P. (2016) Novel Designs for the Audio Mixing Interface Based on Data Visualisation First Principles. In: 140th International AES Convention, 4th - 7th June 2016, Paris, France.

Dewey, Christopher and Wakefield, Jonathan P. (2013) Novel designs for the parametric peaking EQ user interface for single channel corrective EQ tasks. In: 134th Audio Engineering Society Convention, 4th-7th May, 2014, Rome, Italy.

Dewey, Christopher and Wakefield, Jonathan P. (2014) A guide to the design and evaluation of new user interfaces for the audio industry. In: 136th Audio Engineering Society Convention, 26th-29th April 2014, Berlin, Germany.

Dhimish, Mahmoud (2018) Fault Detection and Performance Analysis of Photovoltaic Installations. Doctoral thesis, University of Huddersfield.

Diakun, G.P., Harries, J.E., Martin-Fernandez, Maria Luisa, Towns-Andrews, Elizabeth, Mant, Geoff R., Lowy, J. and Bordas, Joan (1994) X-ray diffraction studies of activation and myosin head motions in frog sartorius muscle during isotonic and isometric contraction. In: Synchrotron Radiation in the Biosciences. Clarendon Press, pp. 426-434. ISBN 978-0198539865

Diaz, J.F., Andreu, J.M., Diakun, G.P., Towns-Andrews, Elizabeth and Bordas, J. (1996) Structural intermediates in the assembly of taxoid-induced microtubules and GDP-tubulin double rings: time-resolved X-ray scattering. Biophysical Journal, 70 (5). pp. 2408-2420. ISSN 0006-3495

Ding, Hao (2016) The Structure of a General Type of Inverse Problem in Metrology. Doctoral thesis, University of Huddersfield.

Ding, Hao, Scott, Paul J. and Jiang, Xiang (2013) Inverse problems of measurement with application on specification of surface profile. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 229. ISBN 9781862181212

Ding, Lieyun, Ma, Ling, Luo, Hanbin, Yu, Minghui and Wu, Xianguo (2011) Wavelet Analysis for tunneling-induced ground settlement based on a stochastic model. Tunnelling and Underground Space Technology, 26 (5). pp. 619-628. ISSN 0886-7798

Dinh, Tien Ba (2005) Solution extraction with the “critical path” in graphplan-based optimal temporal planning. Principles and Practice of Constraint Programming – CP 2004, 3258. p. 793. ISSN 0302-9743

Dinh, Tien Ba, Smith, Barbara M. and McCluskey, T.L. (2003) CPPlanner: A Domain-Independent Temporal Planner with Critical Paths. In: PlanSIG 22, 9th/10th Dec 2003, University of Strathclyde, Glasgow. (Unpublished)

Dix, A., Ellis-Ramduny, D. and Wilkinson, J. (2003) Trigger analysis understanding broken tasks. In: The Handbook of Task Analysis for Human-Computer Interaction. Lawrence Erlbaum Associates, Mahwah, New Jersey, pp. 381-400. ISBN 0805844325

Dix, Alan, Bashford, Christina, Cowgill, Rachel, McVeigh, Simon and Ridgewell, Rupert (2016) Spreadsheets as User Interfaces. In: Proceedings of AVI 2016 (the International Working Conference on Advanced Visual Interfaces), 7-10 June 2016. ACM, Italy: Bari, pp. 192-195. ISBN 978-1-4503-4131-8

Dobraszczyk, Bogdan J., Campbell, Grant M. and Gan, Zhilin (2001) Bread: A Unique Food. In: Cereals and Cereal Products: Technology and Chemistry. Food Products Series, 4 . Aspen Publishers, Maryland, USA, pp. 182-232. ISBN 978-0-8342-1767-6

Dobson, E.D. and Littleton, K.S. (2015) Digital technologies and the mediation of undergraduate students’ collaborative music compositional practices. Learning, Media and Technology. pp. 1-21. ISSN 1743-9884

Dockery, Richard, Hardaker, Glenn and Sabki, Aishah (2007) Learning styles inequity for small to micro firms (SMFs): Social exclusion through work-based e-learning practice in Europe. Multicultural Education & Technology Journal, 1 (2). pp. 126-140. ISSN 1750-497X

Dong Soo, Kim, Hee Suk, Pang, Jae Hyun, Lim, Sung Yong, Yoon and Lee, Hyunkook (2013) Methods and apparatuses for encoding and decoding object based audio signals. US8504376.

Dong Soo, Kim, Hee Suk, Pang, Jae Hyun, Lim, Sung Yong, Yoon and Lee, Hyunkook (2014) Methods and apparatuses for encoding and decoding object-based audio signals. US8625808.

Dong Soo, Kim, Hee Suk, Pang, Jae Hyun, Lim, Sung Yong, Yoon and Lee, Hyunkook (2013) Methods and apparatuses for encoding and decoding object-based audio signals. US8417531.

Dong Soo, Kim, Hee Suk, Pang, Jae Hyun, Lim, Sung Yong, Yoon and Lee, Hyunkook (2012) Methods and apparatuses for encoding and decoding object-based audio signals. US8296158.

Dong Soo, Kim, Hee Suk, Pang, Jae Hyun, Lim, Sung Yong, Yoon and Lee, Hyunkook (2012) Methods and apparatuses for encoding and decoding object-based audio signals. US8234122.

Dong Soo, Kim, Hee Suk, Pang, Jae Hyun, Lim, Sung Yong, Yoon and Lee, Hyunkook (2012) Methods and apparatuses for encoding and decoding object-based audio signals. US8204756.

Dong Soo, Kim, Hee Suk, Pang, Jae Hyun, Lim, Sung Yong, Yoon and Lee, Hyunkook (2011) Methods and apparatuses for encoding and decoding object-based audio signals. US7987096.

Dong Soo, Kim, Hee Suk, Pang, Jae Hyun, Lim, Sung Yong, Yoon and Lee, Hyunkook (2011) Methods and apparatuses for encoding and decoding object-based audio signals. US7979282.

Dong Soo, Kim, Sung Yong, Yoon, Lee, Hyunkook and Jae Hyun, Lim (2013) Method and an apparatus for processing an audio signal. US8380523.

Dransfield, Karl (2020) Characterisation of Corrosion and Wear in Non-Bearing Modular Orthopaedic Surfaces Using Semi-Automated Metrology. Doctoral thesis, University of Huddersfield.

Drinkwater, B.W. and Tian, Gui Yun (2006) Comment. Insight, 48 (7). pp. 390-391. ISSN 1354-2575

Du, Chenyu, Campbell, Grant M., Misailidis, N., Mateos-Salvador, F., Sadhukhan, J., Mustafa, M. and Weightman, R.M. (2009) Evaluating the feasibility of commercial arabinoxylan production in the context of a wheat biorefinery principally producing ethanol. Part 1. Experimental studies of arabinoxylan extraction from wheat bran. Chemical Engineering Research and Design, 87 (9). pp. 1232-1238. ISSN 0263-8762

Dufeu, Frédéric (2013) Comment développer des outils généraux pour l’étude des instruments de musique numériques ? Un prototype en JavaScript pour l’investigation de programmes Max [How to Develop General Tools for the Study of Digital Musical Instruments? A JavaScript protoype for the investigation of Max programs]. Revue Francophone d’Informatique Musicale (3).

Dufeu, Frédéric and Bonardi, Alain (2014) Analysing the Creative Process through a Modelling of Tools and Methods for Composition in Hans Tutschku’s Entwurzelt. In: Electroacoustic Music Studies Network Conference Electroacoustic Music Beyond Performance,, 10th - 14th June 2014, Berlin, Germany.

Duley, Aaron R., Ward, Paul and Hancock, Peter A. (2008) Setting up a laboratory for the measurement of complex performance. In: Handbook of Research on Educational Communications and Technology. Routledge, pp. 789-800. ISBN 9780415963381

Durgun, Ismail, Cankaya, Oguzhan, Kus, Abdil and Unver, Ertu (2016) Application of carbon reinforced composites and rapid prototyping in low volume automotive production. Journal of Materials Testing, 58 (10). pp. 870-876. ISSN 0025-5300

Durgun, Ismail, Kus, Abdil, Unver, Ertu, Jagger, Brian, Doruk, Emre and Findik, Fehim (2016) Experimental Investigation of Sheet Metal Forming Using a Recyclable Low Melting Point Alloy Tool. Materials Testing Journal, 58 (5). pp. 475-480. ISSN 0025-5300

Dutta, Dhrubajyoti (2018) Estimation of Chaos Function for the Implementation of High-Resolution Measurement System. Doctoral thesis, University of Huddersfield.

Dutta, Vikram (2020) The Repetition of Video Game Music, its Impact on Video Game Enjoyment, and How Best to Manage it. Doctoral thesis, University of Huddersfield.

Dweib, Ibrahim, Awadi, Ayman, Elrhman, Seif Elduola Fath and Lu, Joan (2008) Schemaless approach of mapping XML document into Relational Database. 8th IEEE International Conference on Computer and Information Technology, 2008. CIT 2008. pp. 167-172.

Dyer, James (2018) THROUGH THE OPTIC OF DESIGN: SELF-TRACKING AND THE PERMANENCE OF CHANGE. Doctoral thesis, University of Huddersfield.

Dysko, A., Burt, Graeine, Moore, Philip J., Glover, Ian and McDonald, James R. (2008) Satellite Communication Based Loss-of-Mains Protection. In: The Institution of Engineering and Technology 9th International Conference on Developments in Power Systems Protection. IEEE, pp. 687-692. ISBN 9780863419027

Eastburn, Sara (2006) Using mobile phones for critical incident assessment in health placement settings. In: Third biennial joint Northumbria/Earli SIG assessment conference, 30th August-1st September 2006, Northumbria, UK. (Unpublished)

Eaton, Callum (2020) Quantifying Factors of Auditory Immersion for Virtual Reality. Masters thesis, University of Huddersfield.

Eccleston, G.M., Behan-Martin, M.K., Jones, G.R and Towns-Andrews, Elizabeth (2000) Synchrotron X-ray investigations into the lamellar gel phase formed in pharmaceutical creams prepared with cetrimide and fatty alcohols. International Journal of Pharmaceutics, 203 (1-2). pp. 127-139. ISSN 0378-5173

Edmonds, E., Candy, L., Fell, M., Knott, R., Pauletto, S. and Weakley, A. (2005) The studio as laboratory: combining creative practice and digital technology research. International Journal of Human-Computer Studies, 63 (4-5). pp. 452-481. ISSN 1071-5819

Edwards, R.S., Sophian, A., Dixon, S., Tian, Gui Yun and Jiang, Xiang (2006) Dual EMAT and PEC non-contact probe: applications to defect testing. NDT & E International, 39 (1). pp. 45-52. ISSN 0963-8695

Egorov, I.M. and Morrish, L. (2003) Digital approach for the solution of gearing problems. In: ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 2-6 September, 2003, Chicago Downtown Marriott Hotel, Chicago, Illinois. (Unpublished)

Eickhoff, Bridget, Mazzola, L., Bezin, Yann, Tucker, Gareth J., Stradtmann, H, Haigermoser, A, Chollet, H and Landais, J (2015) Track loading limits and cross-acceptance of vehicle approvals. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 229 (6). pp. 710-728. ISSN 0954-4097

El Haj, Seif El Duolaf, Lu, Joan and Yip, Yau Jim (2007) Indexing Technique for XML Documents. In: Proceedings of the 2007 International Conference on Internet Computing, ICOMP 2007. CSREA Press. ISBN 1-60132-044-2

El-Shtewi, Houssein F., Li, Yuhua, Gu, Fengshou and Ball, Andrew (2004) The Need for a Condition Monitoring Database Management System. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

Elamin, Fathi (2009) Fault Detection and Diagnosis in Diesel Engine Using Acoustic Emission (AE). In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2009) Detection of diesel engine valve clearance by acoustic emission. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 7-13. ISBN 9781862180857

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2010) Online Monitoring of Engine Oil Quality Based on AE Signal Analysis. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 116-123. ISBN 9781862180932

Elbarghathi, Fathalla (2016) Condition monitoring of helical gearboxes based on the advanced analysis of vibration signals. Doctoral thesis, University of Huddersfield.

Elforjani, Badradin, Feng, Guojin, Gu, Fengshou and Ball, Andrew (2016) Energy Harvesting Based Wireless Sensor Nodes for The Monitoring Temperature of Gearbox. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Elforjani, Badradin A. (2018) THERMAL ENERGY HARVESTING IN WIRELESS SENSOR NODES USED FOR CONDITION MONITORING. Doctoral thesis, University of Huddersfield.

Elhaj, M. (2008) Numerical simulation and experimental study of a two-stage reciprocating compressor for condition monitoring. Mechanical Systems and Signal Processing, 22 (2). pp. 374-389. ISSN 0888-3270

Elrawemi, Mohamed (2015) Metrology and Characterisation of Defects in Thin-Film Barrier Layers Employed in Flexible Photovoltaic Modules. Doctoral thesis, University of Huddersfield.

Elrawemi, Mohamed, Blunt, Liam and Fleming, Leigh (2013) Process Practice and its Effects on Surface Defects on Flexible PV Barrier Films. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 49-54. ISBN 9781862181212

Elsayed, A., Al-Dadah, R.K., Mahmoud, S., Shi, B. and Rezk, Ahmed (2013) Adsorption low temperature cooling using activated carbon / ethanol working pairs. In: The 5th International Conference on Applied Energy ICAE 2013, 1st-4th July 2013, Pretoria, South Africa. (Unpublished)

Elsayed, A., Al-dadah, R. K., Mahmoud, S. and Rezk, Ahmed (2012) Experimental and theoretical investigation of small-scale cooling system equipped with helically coiled evaporator and condenser. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226 (3). pp. 724-737. ISSN 0954-4062

Elsayed, Ahmed, Al-dadah, Raya K., Mahmoud, Saad and Rezk, Ahmed (2015) Numerical investigation of turbulent flow heat transfer and pressure drop of AL2O3/water nanofluid in helically coiled tubes. International Journal of Low-Carbon Technologies, 10 (3). pp. 275-282. ISSN 1748-1317

Elsayed, Ahmed, Embaye, Mebrahtu, AL-Dadah, Raya, Mahmoud, Saad and Rezk, Ahmed (2013) Thermodynamic performance of Kalina cycle system 11 (KCS11): feasibility of using alternative zeotropic mixtures. International Journal of Low-Carbon Technologies, 8 (S1). i69-i78. ISSN 1748-1317

Elsayed, Ahmed M., AL-Dadah, Raya K., Mahmoud, Saad and Rezk, Ahmed (2012) Investigation of flow boiling heat transfer inside small diameter helically coiled tubes. International Journal of Refrigeration, 35 (8). pp. 2179-2187. ISSN 01407007

Elsharif, Wajdi (2021) Evaluation of Energy Consumption in Industry 4.0. Masters thesis, University of Huddersfield.

Elvitigala, Gayani, Amaratunga, Dilanthi and Haigh, Richard (2008) Improving construction training and development to retain women in construction. In: CIB W89 International Conference on Building Education and research (BEAR), 11-15th February 2008, Sri Lanka. (Unpublished)

Elvitigala, Gayani, Amaratunga, Dilanthi and Haigh, Richard (2008) Women's career advancement and training & development in the construction industry. In: CIB International Conference on Building Education and Research : Building resilience : Conference proceedings. University of Salford, pp. 1723-1735. ISBN 978-1-905732-36-4

Elvitigala, Gayani, Amaratunga, Dilanthi and Haigh, Richard (2006) Women's career development and the role of training and development. In: Second Annual Built Environment Education Conference (BEECON 2006), Recruitment and Retention:The Way Forward, 12-13th September 2006, The Bonnington Hotel, Bloomsbury, London.. (Unpublished)

Elvitigala, Gayani, Amaratunga, Dilanthi and Haigh, Richard (2006) The impact of culture on career development of women in construction. In: 6th International Postgraduate Research Conference in the Built and Human Environment, 6-7th April 2006, Delft University of Technology and TNO, Delft University, Netherlands. (Unpublished)

Elvitigala, Gayani, Amaratunga, Dilanthi, Haigh, Richard and Ingirige, Bingunath (2006) Women's entry into construction: Does industry culture act as a barrier? In: Joint 2006 CIB W065/W055/W086 Symposium Proceedings, 20th October 2006, Rome, Italy. (Unpublished)

Elzawi, Abdussalam (2018) Attitudes of Academic Staff and Students Towards Internet Usage for Academic Purposes in Alzawia University, Libya. Doctoral thesis, University of Huddersfield.

Elzawi, Abdussalam, Kenan, Thuraya, Wade, Steve and Pislaru, Crinela (2013) Exploratory study of the attitudes of academic staff in Libyan Universities towards the role of the Internet. 8th International Conference for Internet Technology and Secured Transactions ICITST 2013. pp. 490-493.

Emsley, Daniel Lewis (2021) Systems Engineering Approach to the Automated Manufacture of Static Tool-Holding. Masters thesis, University of Huddersfield.

Enbaya, Anwar, Asim, Taimoor, Mishra, Rakesh and Rao, Raj B. K. N. (2016) Numerical analysis of a railway compartment fire. In: Current Trends in Reliability, Availability, Maintainability and Safety: An Industry Perspective (Lecture Notes in Mechanical Engineering). Lecture Notes in Mechanical Engineering . Springer, pp. 471-484. ISBN 978-3319235967

Evans, C. K. (2017) An investigation on switching behaviours: shifting creative cycles from hand to digital and back again. In: 3rd PhD By Design Conference "Idea of Self in Research", 3-4 April 2017, Sheffield, UK. (Unpublished)

Evans, C. K. and Allen, Claire (2011) Ryedale. [Video] (Unpublished)

Evans, Claire (2013) Moving students fluidly between digital and physical dimensions: the impact of tutor intervention. In: Univiersity of Huddersfield, ADA T&L conference, 9th September 2013, Huddersfield. (Unpublished)

Evans, Claire and Shah, Karen (2016) Integrating digital tools into the creative pattern experience. In: Fashion: Exploring Critial Issues, 8th Interdisipinary Fashion Conference, 5-7 Sep 2016, Oxford. (Unpublished)

Ezi, Ebube Ezi (2021) DEVELOPMENT OF ALGORITHMS TO FACILITATE AUTOMATIC SURFACE DAMAGE DETECTION AND LOCALISATION FROM SCANNED DATA. Doctoral thesis, University of Huddersfield.

Faber, Wolfgang, Truszczyński, Miroslaw and Woltran, Stefan (2013) Strong Equivalence of Qualitative Optimization Problems. Journal of Artificial Intelligence Research, 47. pp. 351-391. ISSN 1076 - 9757

Fabricatore, Carlo (2007) Gameplay and Game Mechanics: A Key to Quality in Videogames. In: ENLACES (MINEDUC Chile) -OECD Expert Meeting on Videogames and Education, 29-31 October, 2007, Santiago de Chile, Chile.

Fadeni, Feyiseye (2019) A Method for Representing Knowledge and Improving Answer Prediction in Question and Answer Domain. Doctoral thesis, University of Huddersfield.

Fan, Qingming, Hua, Chen, Yan, Cao, Liu, Baolong, Yang, Yuexin, Sun, Bo, Rujia, Zhao and Lu, Joan (2006) The application of XML in the denotation of plant diseases and insect pests information. In: Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP 2006. CSREA Press, pp. 311-315. ISBN 1-60132-005-1

Fan, Yibo Edward, Gu, Fengshou and Ball, Andrew (2004) A Review of the Condition Monitoring of Mechanical Seals. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

Fan, Yibo Edward, Shi, Zhanqun, Harris, Georgina, Gu, Fengshou and Ball, Andrew (2006) Monitoring the Lubrication Condition of Rolling Element Bearings Using the Acoustic Emission Technique. In: ASME 8th Biennial Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Torino, Italy. (Unpublished)

Fang, Chaoying and Campbell, Grant M. (2003) On Predicting Roller Milling Performance IV: Effect of Roll Disposition on the Particle Size Distribution from First Break Milling of Wheat. Journal of Cereal Science, 37 (1). pp. 21-29. ISSN 0733-5210

Fang, Chaoying and Campbell, Grant M. (2003) On Predicting Roller Milling Performance V: Effect of Moisture Content on the Particle Size Distribution from First Break Milling of Wheat. Journal of Cereal Science, 37 (1). pp. 31-41. ISSN 0733-5210

Farahani, Nick, Kelly, Peter, West, Glen, Hill, Claire and Vishnyakov, Vladimir (2013) Photocatalytic Activity of Reactively Sputtered Titania Coatings Deposited Using a Full Face Erosion Magnetron. Coatings, 3 (4). pp. 177-193. ISSN 2079-6412

Farahani, Nick, Kelly, Peter, West, Glen, Ratova, Marina, Hill, Claire and Vishnyakov, Vladimir (2013) An Investigation into W or Nb or ZnFe2O4 Doped Titania Nanocomposites Deposited from Blended Powder Targets for UV/Visible Photocatalysis. Coatings, 3 (3). pp. 153-165. ISSN 2079-6412

Farhat, Zohaib Ali (2021) DESIGN AND SYSTEM IMPLEMENTATION OF PULSE POSITION MODULATION (PPM) BASED CODING SYSTEMS. Doctoral thesis, University of Huddersfield.

Farrington, D and Bezin, Yann (2010) A structural study of an innovative steel–concrete track structure. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 224 (4). pp. 245-257. ISSN 0954-4097

Farzaneh, Masoud, Hefny, Reham M.H. and Kollar, László E. (2012) Experimental Investigation of Dynamic Force on The Performance of Wet Snow Shedding. International Journal of Mechanical Engineering and Mechatronics, 1 (1). pp. 72-79. ISSN 1929-2724

Fazenda, Bruno, Avis, M.R. and Davies, W.J. (2005) Perception of modal distribution metrics in critical listening spaces — dependence on room aspect ratios. Journal of Audio Engineering Society, 53 (12). pp. 1128-1141.

Fazenda, Bruno, Gu, Fengshou, Ball, Andrew and Guan, Luyang (2009) Noise source localisaton in a car environment. In: 8th International Conference on Damage Assessment of Structures, 3-5 August 2009, Beijing, China. (Unpublished)

Fazenda, Bruno, Scarre, Chris, Till, Rupert, Pasalodos, Raquel J., Guerra, Manuel R., Tejedor, Cristina, Peredo, Roberto O., Watson, Aaron, Wyatt, Simon, Benito, Carlos G., Drinkall, Helen and Foulds, Frederick (2017) Cave acoustics in prehistory: exploring the association of Palaeolithic visual motifs and acoustic response. Journal of the Acoustical Society of America (JASA), 142 (3). pp. 1332-1349. ISSN 1520-8524

Fazenda, Bruno, Wankling, Matthew, Hargreaves, J. A., Elmer, L. A. and Hirst, J. (2012) Subjective preference of modal control methods in listening rooms. Journal of the Audio Engineering Society, 60 (5). pp. 338-349. ISSN 1549-4950

Feng, G., Mustafa, A., Gu, J.X., Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) The Real-time Implementation of Envelope Analysis for Bearing Fault Diagnosis based on Wireless Sensor Network. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. ICAC 2013 . Brunel University, London, UK. ISBN 978-1908549082

Feng, Guojin (2016) Optimisation of vibration monitoring nodes in wireless sensor networks. Doctoral thesis, University of Huddersfield.

Feng, Guojin, Zhao, H., Gu, Fengshou, Needham, Paul M. and Ball, Andrew (2017) Efficient implementation of envelope analysis on resources limited wireless sensor nodes for accurate bearing fault diagnosis. Measurement, 110. pp. 307-318. ISSN 0263-2241

Feng, Guojin, Zhen, Dong, Aliwan, M., Gu, Fengshou and Ball, Andrew (2013) Investigation of Wireless Protocols for Remote Condition Monitoring. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 19-24. ISBN 9781862181212

Feng, Z. and Chen, Xun (2006) Grinding Wheel Loading Features Extracted by Image Processing. Key Engineering Materials, 304-30. pp. 14-18. ISSN 1662-9795

Fenton, Steven, Lee, Hyunkook and Wakefield, Jonathan P. (2014) Elicitation and Objective Grading of ‘Punch’ Within Produced Music. In: 136th International Audio Engineering Society Convention, 26th-29th April 2014, Berlin, Germany.

Fenton, Steven, Lee, Hyunkook and Wakefield, Jonathan P. (2015) Hybrid Multiresolution Analysis Of ‘Punch’ In Musical Signals. In: 138th Annual Audio Engineering Society AES Convention, 7th-10th May 2015, Warsaw, Poland.

Fenton, Steven and Wakefield, Jonathan P. (2012) Objective profiling of perceived punch and clarity in produced music. In: 132nd Audio Engineering Society Convention, 26th - 29th April 2012, Budapest, Hungary.

Feradyan, Anthony and Holmes, Violeta (2013) Autonomous embedded fuzzy logic based wireless sensor network for indoor energy management. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 133-139. ISBN 9781862181212

Fernandez Lopes, R., Glover, Ian, Portela Sousa, M., Arujo Lopes, W.T. and Sampaio de Alencar, M. (2010) A Simulation Framework for Spectrum Sensing. In: The 13th International Symposium on Wireless Personal Multimedia Communications, 11-14th October 2010, Mar Hotel, Recife, Brazil. (Unpublished)

Fernando, G., Amaratunga, Dilanthi and Haigh, Richard (2010) Career advancement of the professional women in the UK construction industry: Career success factors. In: CIB 2010, 10-13th May 2010, University of Salford.. (Unpublished)

Fieldhouse, John D. (1999) Overview of disc and drum brake noise using holographic interferometery. In: Proceedings of Inter-Noise 99. Institute of Noise Control Engineering, pp. 745-750. ISBN 9780962207235

Fieldhouse, John D. (2008) The education of automotive engineers to meet the global demands of the 21st century. In: SAE World Congress & Exhibition, 14-17 April 2008, Detroit USA.

Fieldhouse, John D. (1999) A proposal to predict the noise frequency of a disc brake based on the friction pair interface geometry. In: 17th Annual SAE Brake Colloquium and Engineering Display, 10-13 October 1999, Florida USA.

Fieldhouse, John D., Ashraf, Naveed, Talbot, Chris J., Pasquet, T., Franck, P. and Gabriel, R. (2006) Measurement of the dynamic center of pressure of a brake pad during a braking operation. SAE Technical Papers.

Fieldhouse, John D. and Beveridge, C. (2000) Low-frequency drum brake noise investigation using a 1/4 vehicle test rig. In: 18th SAE International Congress and Exposition, 6-9 March 2000, Detroit USA.

Fieldhouse, John D. and Beveridge, C. (2000) A visual experimental noise investigation of a twin calliper disc brake. In: 18th SAE Brake Colloquium and Engineering Display, 1-4 October 2000, San Diego USA.

Fieldhouse, John D. and Beveridge, Carl (2000) Comparison of disc and drum brake rotor mode movement. In: FISITA World Automotive Congress, 12-16 June 2000, Seoul, Korea.

Fieldhouse, John D. and Beveridge, Carl (2000) Noise investigation of a commercial disc brake. In: The International Conference on Brakes 2000. Professional Engineering, pp. 85-100. ISBN 9781860582615

Fieldhouse, John D. and Beveridge, Carl (2001) Visual noise investigation of a four piston opposed type calliper. In: Total vehicle technology. Professional engineering publishing, pp. 173-186. ISBN 1860583245

Fieldhouse, John D., Bryant, David, Crampton, Andrew, Talbot, Chris J. and Layfield, Jonathan (2008) A study of thermal judder on a laboratory dynamometer. In: SAE Brake Colloquium & Engineering Display, October 2008, San Antonio USA.

Fieldhouse, John D., Bryant, David, Palmer, Edward and Mishra, Rakesh (2007) A study of the thermo-elastic effects of braking on high performance cars. In: 21st JUMV International Automotive Conference - Science and Motor Vehicles, 23-25th April 2007, Belgrade, Serbia.

Fieldhouse, John D. and Rennison, M. (1998) An investigation of low frequency drum brake noise. In: Proceedings of the 16th Annual SAE Brake Colloquium & Engineering Display. Society of Automotive Engineers, pp. 65-73. ISBN 0768002761

Fieldhouse, John D., Steel, W.P and Talbot, Chris J. (2005) Measurement and comaprison of in-pane vibration of a twin and single caliper disc brake arrangement. In: Beograd 2005 EAEC European Automotive Congress, 30th May - 1st June 2005, Serbia and Montenegro. (Unpublished)

Fieldhouse, John D., Steel, William P., Talbot, Chris J. and Crampton, Andrew (2007) Measurement of absolute displacement of a twin calliper disc brake during noise. In: 10th EAEC European Automotive Congress (EAEC 2005). Curran Associates. ISBN 9781604236040

Fieldhouse, John D., Steel, William P., Talbot, Chris J. and Siddiqui, Mustakeem A. (2004) Brake noise reduction evaluation using rotor asymmetry. In: International conference : Braking 2004, vehicle braking and chassis control. Professional Engineering Publishing, pp. 209-224. ISBN 1860584640

Fieldhouse, John D. and Talbot, Chris J. (2003) In-plane vibration investigations of a noisy twin caliper disc brake. SAE Technical Papers.

Fieldhouse, John D., Talbot, Chris J., Steel, William P. and Crampton, Andrew (2003) The measurement of in-plane vibration characteristics of a noisy twin calliper disc brake. In: Inter-noise 2003. Internoise, pp. 135-142. ISBN 9788995218914

Figueres-Esteban, Miguel, Hughes, Peter, EL Rashidy, Rawia Ahmed Hassan and Van Gulijk, Coen (2017) Integrating data to support SPAD management. In: Sixth International Human Factors Rail Conference, 6-9 November 2017, London. (Unpublished)

Figueres-Esteban, Miguel, Hughes, Peter and Van Gulijk, Coen (2016) Ontology network analysis for safety learning in the railway domain. In: Risk, Reliability and Safety: Innovating Theory and Practice: Proceedings of ESREL 2016. CRC Press. ISBN 9781138029972

Figueres-Esteban, Miguel, Hughes, Peter and Van Gulijk, Coen (2016) Visual analytics for text-based railway incident reports. Safety Science, 89. pp. 72-76. ISSN 0925-7535

Finlayson, Graham, Hordley, Steven, Schaefer, Gerald and Tian, Gui Yun (2005) Illuminant and device invariant colour using histogram equalisation. Pattern Recognition, 38 (2). pp. 179-190. ISSN 0031-3203

Firth, Matthew (2016) Minimising latency of pitch detection algorithms for live vocals on low-cost hardware. Fields: journal of Huddersfield student research, 2 (1). e25. ISSN 2057-0163

Fisher, Michael and Gibson, Ian (2011) The autonomous post production of a piano recording. In: AES 130th Conference, 13th-16th May 2011, London, UK.

Fitzpatrick, Frank and Unver, Ertu (2011) Digital Sculpting for Historical Representation: Neville Tomb Case Study. In: sculpture network Drawing Symposium UK 2011, 26th August 2011, Huddersfield, UK.

Fitzsimons, V.G. (2006) Information society: networks, collective action and the role of institutions. International Journal of Humanities, 3 (6). pp. 19-32. ISSN 1447-9508

Fleming, Andrew, Lee, Angela and Kagioglou, Mike (2009) Generic disaster management and reconstruction : process protocol. RICS. ISBN 9781842194973

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2005) Compensation of thermal errors on a small vertical milling machine. In: Proceedings of the 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. European Society for Precision Engineering and Nanotechnology, pp. 432-441. ISBN 1861941188

Fletcher, Simon, Postlethwaite, S. R. and Ford, Derek G. (2001) Volumetric compensation through the machine controller. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 321-330. ISBN 9781853128905

Forbes, Alistair B., Papananias, Moschos, Longstaff, Andrew P., Fletcher, Simon, Mengot, Azibananye and Jonas, Kevyn (2016) Developments in automated flexible gauging and the uncertainty associated with comparative coordinate measurement. In: euspen's 16th International Conference & Exhibition, 30 May - 3 June, Nottingham, UK. european society for precision engineering and nanotechnology, pp. 111-112. ISBN 978-0-9566790-8-6

Ford, Derek G. (2003) Machine tool performance: past and present research contributions from the Centre for Precision Technologies. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 403-419. ISBN 9781853129902

Ford, Derek G., Pislaru, Crinela and Freeman, J.M. (2001) Improving CNC machine tools performance by using modular approach. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 301-312. ISBN 9781853128905

Fox, James Anthony (2016) ‘It’s a-me, Mario!’ Exploring dynamic changes and similarities in the composition of early Nintendo video game music. Fields: journal of Huddersfield student research, 2 (1). e15. ISSN 2057-0163

Franco, Santiago (2018) Meta-Search Through the Space of Representations and Heuristics on a Problem by Problem Basis. In: Proceedings of the Thirty-Second AAAI Conference on Artificial Intelligence. AAAI Press, pp. 6169-6176.

Frank, Jeremy, McCluskey, T.L., Myers, Karen and Yorke-Smith, Neil (2007) Moving planning and scheduling systems into the real world. In: International Workshop on Moving Planning and Scheduling Systems into the Real World To be held in conjunction with ICAPS'07: 17th International Conference on Automated Planning & Scheduling, September 22-26th, 2007, Providence, Rhode Island, USA. (Unpublished)

Freegah, Basim, Asim, Taimoor and Mishra, Rakesh (2013) Effects of condenser volume on the performance of a solar thermo-syphon. In: Annual Researchers' ConferenceComputing & Engineering 2013 (CEARC'13), December 2013, University of Huddersfield, Huddersfield, UK.

Freeman, J.M. and Ford, Derek G. (2001) The reconstruction of cyclically perturbed signals from aliased data. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 313-320. ISBN 9781853128905

Freeman, J.M., Longstaff, Andrew P. and Ford, Derek G. (2003) A general data logger for the measurement of the dynamics and the parameter estimation of machine tools. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 569-578. ISBN 9781853129902

Freeman, J.M., White, A.J. and Ford, Derek G. (2001) Ball-screw thermal errors - a finite element simulation for on-line estimation. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 269-278. ISBN 9781853128905

Frend, Ronald (2011) Determination of thermal insulation properties of buildings and structures’ external envelope using infrared thermal imaging. Masters thesis, University of Huddersfield.

Fuh, Kenneth F., Coate, Joanna M. and Campbell, Grant M. (2014) Effects of Roll Gap, Kernel Shape, and Moisture on Wheat Breakage Modeled Using the Double Normalized Kumaraswamy Breakage Function. Cereal Chemistry, 91 (1). pp. 8-17. ISSN 0009-0352

Fumagalli, Anita (2020) An Examination of the Validity of the Concealed Information Test. Doctoral thesis, University of Huddersfield.

Funfschilling, C., Perrin, G., Sebes, M., Bezin, Yann, Mazzola, L. and Nguyen-Tajan, M.-L. (2015) Probabilistic simulation for the certification of railway vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 229 (6). pp. 770-781. ISSN 0954-4097

Furness, Jordan (2021) Developing an Events Strategy to encourage Technology Adoption within Small and Medium Enterprises. Masters thesis, University of Huddersfield.

Furness, Thomas Richard (2021) INTERNAL FEATURE MEASUREMENT UTILISING INFRARED THERMOGRAPHY. Doctoral thesis, University of Huddersfield.

Gabriel, Stefan (2021) Has Corporate Venture Capital unleashed its full potential yet? Doctoral thesis, University of Huddersfield.

Gadour, Aemad (2022) Flow Non-Uniformity(Φ) In Ducts with Single Inlet and Multiple Outlets. Masters thesis, University of Huddersfield.

Galindez-Najera, Silvia Patricia and Campbell, Grant M. (2014) Modeling First Break Milling of Debranned Wheat Using the Double Normalized Kumaraswamy Breakage Function. Cereal Chemistry Journal, 91 (6). pp. 533-541. ISSN 0009-0352

Gardiner, J.G. and Glover, Ian (2000) Mobile and personal satellite communications 4. University of Bath. ISBN 9781857900774

Garnaes, J., Kofod, N., Kuhle, A., Nielson, C., Dirscherl, K. and Blunt, Liam (2002) Calibration of step heights and roughness measurements with atomic force microscopes. Precision Engineering, 27 (1). pp. 91-98. ISSN 0141-6359

Garrett, Ian, Calvert, N.M., Sibley, Martin J.N., Unwin, Rodney T. and Cryan, R.A. (1989) Optical Fibre Digital Pulse Position Modulation. BT Technology Journal, 7 (3). pp. 5-11. ISSN 1358-3948

Gaskill, K. (2006) Fast and Slow Networks. [Show/Exhibition]

Gaskill, K. (2006) Interval website. UNSPECIFIED. (Submitted)

Gaskill, K. (2006) Overlap. [Video] (Submitted)

Gater, Paul Nicholas (2020) Oxidation Unsusceptible Photocathodes for Near-UV. Masters thesis, University of Huddersfield.

Ge, Xiaocheng (2017) A New Model of Safety Management System for Railway Operation. In: First International Conference on Rail Transportation,, 10-12 July 2017, Southwest Jiaotong University, Chengdu, China. (Unpublished)

Geebren, Ahmed (2022) Understanding Analytical Factors which Influence Trust and Satisfaction within Mobile Banking. Doctoral thesis, University of Huddersfield.

Geerts, Floris, Karvounarakis, Grigoris, Christophides, Vassilis and Fundulaki, Irini (2013) Algebraic structures for capturing the provenance of SPARQL queries. In: Proceedings of the 16th International Conference on Database Theory - ICDT '13. Association for Computing Machinery, pp. 153-164. ISBN 9781450315982

Gennish, R., Jiang, J, Albarbar, A., Harris, Georgina, Gu, Fengshou and Ball, Andrew (2006) Diesel Engine Combustion Monitoring Based on Acoustic Measurement of Exhaust Systems. In: ASME 8th Biennial Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Torino, Italy. (Unpublished)

Gent, Ian P., Prosser, Patrick, Smith, Barbara M. and Wei, Wu (2004) Supertree construction with constraint programming. In: Principles and Practice of Constraint Programming – CP 2003. Lecture Notes in Computer Science, 2833/2 . Springer, Heidelberg, pp. 837-841. ISBN 978-3-540-20202-8

Georgakoudis, Elias D, Tipi, Nicoleta S. and Bamford, Colin (2006) Potential barriers generated by the implementation of the European packaging regulations. In: Logistics Research Network 2006 conference proceedings. The Chartered Institute of Logistics and Transport, pp. 125-130. ISBN 9781904564171

Georgiou, Michalis (2019) SEMANTIC HYPERCAT. Masters thesis, University of Huddersfield.

Ghabar, Omar (2018) AN INVESTIGATION INTO CONTEXT-AWARE AUTOMATED SERVICE IN SMART HOME FACILITIES: SEARCH ENGINE AND MACHINE LEARNING WITH SMARTPHONE. Doctoral thesis, University of Huddersfield.

Ghareb, Mazen (2021) MEASUREMENT METRICS FOR HYBRID ASPECT ORIENTED/OBJECT-ORIENTED SOFTWARE SYSTEMS. Doctoral thesis, University of Huddersfield.

Ghasemi Najm, Mahnaz (2020) Using ANDSF For Convergence Access Network Selection and Service Adaptation Based on Context. Masters thesis, University of Huddersfield.

GhasemiNajm, M., Sibley, Martin J.N. and Jafarian, A. (2012) Combination of LTE and IMS to deliver location based services. In: 2012 20th Telecommunications Forum (TELFOR), 20th - 22nd November 2012, Belgrade, Serbia.

Ghosna, Fadi and Sibley, Martin J.N. (2007) Pulse position modulation coding schemes for optical intersatellite links. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-12.

Ghosna, Fadi and Sibley, Martin J.N. (2010) Pulse position modulation coding schemes for optical intersatellite links. Electronics letters, 46 (4). pp. 290-291. ISSN 0013-5194

Ghosna, Fadi Jawdat (2010) Pulse Position Modulation Coding Schemes for Optical Inter-satellite Links in Free Space. Doctoral thesis, University of Huddersfield.

Gibbs, Graham R., Friese, Susanne and Mangabeira, Wilma C. (2002) The use of new technology in qualitative research Introduction to Issue 3(2) of FQS. Forum Qualitative Sozialforschung/ Forum Qualitative Social Research, 3 (2). ISSN 1438-5627

Gibson, Ian (2010) Collaborative music software for mobile phones. International Journal of Research and Reviews in Applied Sciences, 2 (2). pp. 104-107. ISSN 2076-7366

Gibson, Ian (2014) CosMix. [Show/Exhibition]

Gibson, Ian (2010) A Wireless, Real-time, Distributed Music Composition and Performance System. The International Journal of the Arts in Society, 5 (1). pp. 303-310. ISSN 1833-1866

Gibson, Ian and Dovey, Matthew (2006) A Collaborative Composition System Based On A Service Oriented Architecture. Proceedings of the International Computer Music Conference. pp. 401-404.

Gibson, Ian and Dovey, Matthew (2010) A wireless, real-time, social music performance system for mobile phones. International Computer Music Conference Proceedings.

Gibson, Ian and England, Richard (2004) Fragmentary Collaboration in a Virtual World: The Educational Possibilities of Multi-user, Three-Dimensional Worlds. In: Advances in E-engineering and Digital Enterprise Technology-1: Proceedings of the Fourth International Conference on E-Engineering and Digital Enterprise Technology (e-ENGDET), Leeds Metropolitan University, UK, 1-3 September 2004. John Wiley and Sons, London, UK, pp. 299-304. ISBN 9781860584671

Gibson, Ian and Howard, David (1995) Intuitive and dynamic control of synthesised sounds by voice. International Computer Music Conference Proceedings. pp. 228-229.

Gibson, Ian and Howard, David (1994) Sound processing control using voice and graphical information. Eurographics UK Chapter 12 Conference Proceedings. pp. 19-28.

Gibson, Ian and Howard, David (1994) Voice parameter estimation for sound processing control. Proceedings of the Institute of Acoustics, 16 (5). pp. 207-214. ISSN 0309-8117

Gibson, Ian and Howard, David (1998) A voice-controlled music synthesis system. Proceedings of the Institute of Acoustics, 20 (6). pp. 205-213. ISSN 0309-8117

Gibson, Ian, Howard, David and Tyrrell, Andrew (1998) Real-time singing synthesis using a parallel processing system. Proceedings of the IEE Colloquium on Audio And Music Technology. 8/1-8/6.

Gibson, Ian, Middleton, Deborah K. and Adkins, Monty (2014) Borderlands CosMixed. [Show/Exhibition]

Gibson, M. L., Venters, Colin, Duboc, Leticia, Betz, Stefanie, Chitchyan, Ruzanna, Palacin Silva, V., Penzenstadler, Birgit and Seyff, Norbert (2017) Mind the chasm: A UK fisheye lens view of sustainable software engineering. In: 6th International Workshop on Requirements Engineering for Sustainable Systems (RE4SuSy), 4 September 2017, Lisbon, Portugal.

Gilkes, Oliver S. and Mishra, Rakesh (2006) Comparison of passive and active methods for improving transient performance of turbocharged engine systems. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Gilkes, Oliver S. and Mishra, Rakesh (2006) Computer simulation of air injection to the inlet manifold on turbocharged engines. In: FISITA World Student Congress, 2006, October 2006, Yokohama, Japan.

Gilkes, Oliver S., Mishra, Rakesh and Fieldhouse, John D. (2008) Simulation of the Transient Performance of a Turbocharged Diesel Engine Featuring a Two Point Air Injection Transient Assist System. Working Paper. SAE International, London, UK.

Gilkes, Oliver S., Mishra, Rakesh, Fieldhouse, John D. and Rao, Vasu (2007) Effectiveness of active and passive methods of improving transient response in turbocharged engine systems. In: 11th European Automotive Congress : Automobile for the future, 30 May - 1Sst June 2007, Budapest, Hungary. (Unpublished)

Gilkes, Oliver S., Mishra, Rakesh, Fieldhouse, John D. and Rao, Vasu (2009) Unsteady Interaction Of Turbocharger Compressor With IC Engine. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Gilkes, Oliver S., Mishra, Rakesh, Rao, H.V. and Fieldhouse, John D. (2007) Transient response of turbocharged diesel engine for transient operation using air injection assist system. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

Ginige, K. N. and Amaratunga, Dilanthi (2011) Capacity development for post disaster reconstruction of the built environment. In: Post-Disaster Reconstruction of the Built Environment : Rebuilding for Resilience:. Blackwell Publishing Ltd, pp. 13-28. ISBN 9781444333565

Ginige, K. N., Amaratunga, Dilanthi and Haigh, Richard (2010) Capacity analysis for disaster mitigation and reconstruction in the built environment: A stakeholder framework. In: CIB 2010, 10-13th May 2010, University of Salford.. (Unpublished)

Ginige, K. N., Amaratunga, Dilanthi and Haigh, Richard (2010) Developing capacities for disaster risk reduction in the built environment: capacity analysis in Sri Lanka. International Journal of Strategic Property Management, 14 (4). pp. 287-303. ISSN 1648-715X

Ginige, K. N., Amaratunga, Dilanthi and Haigh, Richard (2007) Effect of attitudes towards creating women managers in the construction industry. In: 7th International Postgraduate Conference in the Built and Human Environment, 28-29th March 2007, Salford Quays, UK.. (Unpublished)

Ginige, K. N., Amaratunga, Dilanthi and Haigh, Richard (2010) Enhancing capacities for disaster mitigation and reconstruction in the built environment: a case study from Sri Lanka. In: CIB 2010, 10-13th May 2010, University of Salford.. (Unpublished)

Ginige, K. N., Amaratunga, Dilanthi and Haigh, Richard (2007) Gender stereotypes: A barrier for career development of women in construction. In: 3rd Annual Built Environment Education Conference of the Centre for Education in the Built Environment, 12-13th September 2007, University of Westminster, Central London. (Unpublished)

Ginige, K. N., Amaratunga, Dilanthi and Haigh, Richard (2007) Improving construction industry image to enhance women representation in the industry workforce. In: 23rd Annual ARCOM (Association of Researchers in Construction Management ) conference, 3-5th September 2007, Belfast. (Unpublished)

Ginige, K. N., Amaratunga, Dilanthi and Haigh, Richard (2010) Mainstreaming women's needs with disaster risk reduction in the built environment: preliminary findings. In: COBRA 2010 The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors. RICS. ISBN 978-1-84219-619-9

Ginige, K. N., Amaratunga, Dilanthi and Haigh, Richard (2010) Women in decision making and disaster reduction in the built environment- A way towards sustainable development. In: Proceedings of the CIB W055 - Building Economics/W065, May 2010, Salford, Greater Manchester. (Unpublished)

Ginige, K. N., Thurairajah, N., Amaratunga, Dilanthi and Haigh, Richard (2008) Role of women leaders in the UK construction industry and their career barriers. In: CIB W89 International Conference on Building Education and research (BEAR), 11-15th February 2008, Sri Lanka. (Unpublished)

Ginige, Kanchana, Amaratunga, Dilanthi and Haigh, Richard (2014) Tackling Women's Vulnerabilities through Integrating a Gender Perspective into Disaster Risk Reduction in the Built Environment. Procedia Economics and Finance, 18. pp. 327-335. ISSN 2212-5671

Gledhill, Duke, Tian, G.Y., Liao, J. and Clarke, David (2004) Panoramic imaging based e-laboratory construction. In: Advances in E-Engineering and Digital Enterprise Technology: Proceedings of the 4th International Conference on E-Engineering and Digital Enterprise. Wiley, pp. 589-600. ISBN 9781860584671

Glover, Ian (1996) Fading countermeasures. In: COST 235: radiowave propagation effects on next-services terrestrial telecommunications systems : final report. Office for Oficial Publications of the European Communities, pp. 159-165. ISBN 9789282780237

Glover, Ian (1991) Meteor burst propagation. Electronics & Communication Engineering Journal, 3 (4). pp. 185-192. ISSN 0954-0695

Glover, Ian (1988) Modelling of spectral characteristics of hydrometeor scatter. In: IEE Colloquium on Radio Frequency Co-Channel Interference Measurements and Modelling at 1-30 GHz. IEEE, pp. 1-30.

Glover, Ian (2012) Radio Location of Partial Discharge for the Future Smart Grid. In: ICRCC, 21-22nd December 2012, Thiruvannamalai, India. (Unpublished)

Glover, Ian (1999) Radiometry. In: Encyclopedia of Electrical and Electronics Engineering. Wiley-Blackwell, pp. 114-122. ISBN 9780471139461

Glover, Ian (2006) Scintillation for low availability, low elevation angle, satellite communication systems. In: 3rd International Conference on Telecommunication and Computer Networks (IADAT-tcn), 27-29th September 2006, University of Portsmouth. (Unpublished)

Glover, Ian (2011) The Wireless Sensor Network Propagation Environment. In: European Microwave Conference, 9-14th October 2011, Manchester. (Unpublished)

Glover, Ian and Atkinson, R. (2013) Overview of wireless techniques for use with MEMS. In: Handbook of MEMS for wireless and mobile applications. Woodhead Publishing Series in Electronic and Optical Materials (45). Woodhead Publishing. ISBN 978 0 85709 271 7

Glover, Ian, Atkinson, R., Soraghan, J.J., Judd, M. and Queiroz Vieira, M.F. (2012) A Proposed WSN for Insulation Condition Monitoring in the Future Smart Grid. In: Smart Grid Workshop, 20-21st September 2012, School of Electronic, Electrical and Systems Engineering Sir David Davies Building Loughborough University. (Unpublished)

Glover, Ian, Barclay, L. and Crecraft, D. (1999) Microwave radio propagation. Advanced Radio-frequency Engineering . Open University. ISBN 9780749284619

Glover, Ian and Bhatti, S.A. (2012) Performance Evaluation of IEEE 802.15.4 Receiver in the Presence of Broadband Impulsive Noise. IEEE Standards Education e-magazine, 2 (3).

Glover, Ian and Grant, Peter (2009) Digital Communications (3rd edition). Pearson. ISBN 9780273718307

Glover, Ian, Hardaker, Glenn, Xu, Zhijie, UNSPECIFIED and UNSPECIFIED (2004) Collaborative annotation system environment (CASE) for online learning. Campus-Wide Information Systems, 21 (2). pp. 72-80. ISSN 1065-0741

Glover, Ian, Jones, Stephen M.R., Khanifar, Ahmad and Robinson, A. (1991) Experimental studies of bistatic hydrometeor scatter at 10 GHz. In: Antennas and Propagation 1991: International Conference Proceedings. IEEE, pp. 225-228. ISBN 9780852965085

Glover, Ian and McEwan, N.J. (1990) Antenna Induced Clear Air Cross-polarisation On Terrestrial LOS Links. In: 10th Annual International Symposium on Geoscience and Remote Sensing. IEEE, pp. 85-86.

Glover, Ian, Pennock, S.R. and Shepherd, P.R. (2005) Microwave Communications Engineering: Vol. 1: Devices, Circuits and Subsystems. Wiley-Blackwell. ISBN 9780471899648

Glover, Ian and Sengupta, N. (2006) On the dimensions and interpretation of impulse response. International Journal of Electrical Engineering Education, 43 (3). pp. 271-274. ISSN 0020-7209

Glover, Ian, Shan, Q., Moore, P.J., Portugues, I.E. and Watson, R. J. (2007) An investigation into the vulnerability of WLAN and WPAN technologies to impulsive noise in electricity transmission substations. In: ISCTA 2007, 17th July 2007, Ambleside. (Unpublished)

Glover, Ian, Shan, Q., Portugues, I.E., Moore, P.J., Watson, R. J. and Rutherford, R. (2007) Deployment of ZigBee in the Extreme Interference Environment of Electricity Transmission Substations. In: URSI Symposium, 2-3rd July 2007, University of Portsmouth. (Unpublished)

Glover, Ian and Smithson, A.G. (2006) Propagation across the indoor-outdoor interface. In: International Conference on Microwaves, Antennas, Measurements and Modelling, December 2006, Jodhpur, India. (Unpublished)

Glover, Ian, Xu, Zhijie, Hardaker, Glenn, UNSPECIFIED and UNSPECIFIED (2005) Redeveloping an eLearning annotation system as a web service. In: Proceedings of World Conference on Educational Multimedia, Hypermedia and Telecommunications 2005. Association for the Advancement of Computing in Education (AACE), Montreal, Canada, pp. 4221-4228. ISBN 1880094568

Glover, Ian, de Souza Neto, J.M.R., Bhatti, S. A., da Rocha Neto, J.S., Vieira, M., Atkinson, R., Judd, M. and Soraghan, J.J. (2012) Radio science and wireless communications for the smart grid. In: 5th International Conference on Computers and Devices for Communication, 17-19th December 2012, Kolkate, India. (Unpublished)

Goddard, Nikita (2020) Development of a Perceptual Model for the Trade-off Between Interaural Time and Level Differences for the Prediction of Auditory Image Position. Masters thesis, University of Huddersfield.

Goel, Saurav, Luo, Xichun, Comley, Paul, Reuben, Robert L and Cox, Andrew (2013) Brittle–ductile transition during diamond turning of single crystal silicon carbide. International Journal of Machine Tools and Manufacture, 65. pp. 15-21. ISSN 08906955

Goel, Saurav, Luo, Xichun, Reuben, R.L., Bin Rashid, Waleed and Sun, Ji Ning (2011) Simulation Study of Cutting Forces, Stresses and Temperature during Nanometric Cutting of Single Crystal Silicon. Key Engineering Materials, 496. pp. 223-228. ISSN 1662-9795

Goel, Saurav, Luo, Xichun, Reuben, R.L., Bin Rashid, Waleed and Sun, Ji Ning (2011) Single Point Diamond Turning of Single Crystal Silicon Carbide: Molecular Dynamic Simulation Study. Key Engineering Materials, 496. pp. 150-155. ISSN 1662-9795

Goel, Saurav, Luo, Xichun, Reuben, Robert L and Rashid, Waleed (2011) Atomistic aspects of ductile responses of cubic silicon carbide during nanometric cutting. Nanoscale Research Letters, 6 (1). p. 589. ISSN 1556-276X

Goel, Saurav, Luo, Xichun and Reuben, Robert L. (2012) Molecular dynamics simulation model for the quantitative assessment of tool wear during single point diamond turning of cubic silicon carbide. Computational Materials Science, 51 (1). pp. 402-408. ISSN 09270256

Goel, Saurav, Luo, Xichun and Reuben, Robert L. (2012) Shear instability of nanocrystalline silicon carbide during nanometric cutting. Applied Physics Letters, 100 (23). p. 231902. ISSN 0003-6951

Goel, Saurav, Luo, Xichun and Reuben, Robert L. (2013) Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process. Tribology International, 57. pp. 272-281. ISSN 0301679X

Goel, Saurav, Luo, Xichun, Reuben, Robert L. and Pen, Hongmin (2012) Influence of temperature and crystal orientation on tool wear during single point diamond turning of silicon. Wear, 284-28. pp. 65-72. ISSN 0043-1648

Goel, Saurav, Luo, Xichun, Reuben, Robert L. and Rashid, Waleed Bin (2012) Replacing diamond cutting tools with CBN for efficient nanometric cutting of silicon. Materials Letters, 68. pp. 507-509. ISSN 0167577X

Goosey, Peter (2017) Creating Immersion: A Semiotic and Compositional Insight into the Promotion of Immersion through Video-Game Soundtracks. Masters thesis, University of Huddersfield.

Gou, Yangchun (2015) The Study of the Dynamics of Diesel Engine Fuel Injectors with Alternative Fuels for Diagnosis. Masters thesis, University of Huddersfield.

Gracie, Andy, Hirschhorn, Michelle, Southern, Jen and Symmons, Steve (2005) Pylon. In: transmediale.05, 4-8 February 2005, Berlin.

Graham, Gary and Hardaker, Glenn (2007) How the technology shock of the internet is radically changing the competitive dynamics of the online music market. International Journal of Electronic Marketing and Retailing, 1 (3). pp. 260-278. ISSN 1741-1025

Grain, Emma and Unver, Ertu (2017) Design and Development of 3D Printed Textile Structures. [Show/Exhibition]

Gribben, Christopher (2018) Investigations into the Perception of Vertical Interchannel Decorrelation in 3D Surround Sound Reproduction. Doctoral thesis, University of Huddersfield.

Gribben, Christopher and Lee, Hyunkook (2017) A Comparison between Horizontal and Vertical Interchannel Decorrelation. Applied Sciences, 7 (11). p. 1202. ISSN 2076-3417

Gribben, Christopher and Lee, Hyunkook (2016) The Perception of Vertical Image Spread by Interchannel Decorrelation. In: Audio Engineering Society 140th International Convention, 4th - 7th June 2016, Paris, France.

Gribben, Christopher and Lee, Hyunkook (2017) The Perceptual Effect of Vertical Interchannel Decorrelation on Vertical Image Spread at Different Azimuth Positions. In: AES 142nd International Conference, 20th-23rd May 2017, Berlin, DE.

Gribben, Christopher and Lee, Hyunkook (2014) The Perceptual Effects of Horizontal and Vertical Interchannel Decorrelation, using the Lauridsen Decorrelator. In: AES 136th Convention. AES, p. 9027.

Gribben, Christopher and Lee, Hyunkook (2015) Towards the development of a universal listening test interface generator in Max. In: 138th Annual Audio Engineering Society AES Convention, 7th-10th May 2015, Warsaw, Poland.

Griffin, J, Limchimchol, Thitikorn and Chen, Xun (2006) Multivariable classification of grinding burn and chatter. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International. ISBN 9780953389094

Griffin, James Marcus and Chen, Xun (2009) Characteristics of the acoustic emission during horizontal single grit scratch tests: Part 1 characteristics and identification. International Journal of Abrasive Technology, 2 (1). pp. 25-42. ISSN 1752-2641

Griffin, James Marcus and Chen, Xun (2006) Classification of the acoustic emission signals of rubbing, ploughing and cutting during single grit scratch tests. International Journal of Nanomanufacturing, 1 (2). pp. 189-209. ISSN 1746-9392

Griffin, James Marcus and Chen, Xun (2006) Classification of varying levels of ploughing, rubbing and cutting during Single Grit tests using Evolutionary Inspired Computer Techniques. In: 4th International Conference on Manufacturing Research (ICMR 2006), 5th-7th September 2006, Liverpool John Moores University, Liverpool. (Submitted)

Griffin, James Marcus and Chen, Xun (2005) Investigation of grinding burn through various extracted sensory information. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 263-268. ISBN 9780953389087

Grigutis, Laurynas (2018) Investigation into Aspects of Feedback and Gamification in Computer-Assisted Musical Instrument Tutoring. Masters thesis, University of Huddersfield.

Grossoni, Ilaria, Shackleton, Philip, Bezin, Yann and Jaiswal, Jay (2017) Longitudinal rail weld geometry control and assessment criteria. Engineering Failure Analysis, 80. pp. 352-367. ISSN 1350-6307

Gu, Fengshou and Ball, Andrew (1996) Diesel injector dynamic modelling and estimation of injection parameters from impact response Part 1: modelling and analysis of injector impacts. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 210 (44). pp. 293-302. ISSN 0954-4070

Gu, Fengshou, Ball, Andrew and Li, W (2000) The Condition Monitoring of Diesel Engines Using Acoustic Measurements-Part 1: Acoustic Characteristics of the Engine and Representation of the Acoustic Signals. SAE Technical Papers. ISSN 0148-7191

Gu, Fengshou, Ball, Andrew and Li, W (2000) The Condition Monitoring of Diesel Engines Using Acoustic Measurements-Part 2: Fault Detection and Diagnosis. SAE Technical Papers. ISSN 0148-7191

Gu, Fengshou, Ball, Andrew and Rao, K K (1996) Diesel injector dynamic modelling and estimation of injection parameters from impact response part 2: prediction of injection parameters from monitored vibration. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 210 (44). pp. 303-312. ISSN 0954-4070

Gu, Fengshou, Jacob, P J and Ball, Andrew (1999) Non-parametric models in the monitoring of engine performance and condition: Part 2: non-intrusive estimation of diesel engine cylinder pressure and its use in fault detection. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 213 (2). pp. 135-143. ISSN 0954-4070

Gu, Fengshou, Jiang, J, Ball, Andrew, Gennish, R. and Liu, K (2006) An Experimental Study of Acoustic Impedance Measurement for Engine Condition Monitoring. In: Spring Conference Futures in Acoustics, 3-4 April 2006, Southampton, UK. (Unpublished)

Gu, Fengshou, Naid, A., Hu, Niaoqing, Shao, Yimin, Mishra, Rakesh, Stubbs, Christopher and Ball, Andrew (2009) Electrical Motor Current Signal Analysis using Modified Bispectrum for Fault Diagnosis of Reciprocating Compressors. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Guan, Luyang, Fengshou, Gu, Fazenda, Bruno, Ball, Andrew, Yichun, Yang and Pengxiao, Teng (2009) DOA Estimation in Car for Abnormal Sound Localisation. In: 8th International Conference on Damage Assessment of Structures, 3-5 August 2009, Beijing, China. (Submitted)

Guan, Luyang, Gu, Fengshou, Shao, Yimin, Mishra, Rakesh and Ball, Andrew (2009) Empirical Mode Decomposition Based Method for Fault Diagnosis in a Helical Gearbox. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Guo, Jian, Ding, Lieyun, Luo, Hanbin, Zhou, Cheng and Ma, Ling (2014) Wavelet prediction method for ground deformation induced by tunneling. Tunnelling and Underground Space Technology, 41. pp. 137-151. ISSN 0886-7798

Guo, Li, Li, Bo and Chen, Xun (2007) Grinding temperature in high efficiency deep grinding of engineering ceramics. In: Proceedings of the 13th International Conference on Automation and Computing. Pacilantic International. ISBN 9780955529313

Haase, Frerk, Lockwood, S. and Ford, Derek G. (2003) Active vibration control of machine tool structures - Part 2: an experimental active-vibration control system. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 451-460. ISBN 9781853129902

Haba, Usama, Feng, Guojin, Shaeboub, Abdulkarim, Peng, Xinyu, Gu, Fengshou and Ball, Andrew (2016) Detection and Diagnosis of Compound Faults in a Reciprocating Compressor based on Motor Current Signatures. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Hagi, Ahmed (2016) A Simplified Transient CFD Model to Support the Development of a Low Cost Self-Monitoring Railway Damper. Masters thesis, University of Huddersfield.

Haigh, Richard and Amaratunga, Dilanthi (2014) Editorial : 4th International Conference on Building Resilience, Building Resilience 2014, 8-10 September 2014, Salford Quays, United kingdom. Procedia Economics and Finance, 18. pp. 1-8. ISSN 2212-5671

Haigh, Richard and Amaratunga, Dilanthi (2015) Editorial : ANDROID Exchange Newsletter : #ROAD2SENDAI. ANDROID Exchange Newsletter, 2 (3).

Haigh, Richard and Amaratunga, Dilanthi (2015) Editorial : ANDROID Exchange Newsletter : Third annual conference of the ANDROID network. ANDROID Exchange Newsletter, 2 (2).

Haigh, Richard and Amaratunga, Dilanthi (2011) Infrastructure reconstruction programmes in the conflict affected communities of north and east Sri Lanka, knowledge society or knowledge for society? In: International Conference on the Social Sciences and the Humanities, December 2011, University of Peradeniya, Kandy, Sri Lanka. (Unpublished)

Haigh, Richard and Amaratunga, Dilanthi (2012) Making cities resilient. International Journal of Disaster Resilience in the Built Environment, 3 (2). ISSN 1759-5908

Haigh, Richard and Amaratunga, Dilanthi (2011) The contrasting fortunes of Christchurch and Port-au-Prince. International Journal of Disaster Resilience in the Built Environment, 2 (1). ISSN 1759-5908

Haigh, Richard and Amaratunga, Dilanthi (2010) An integrative review of the built environment discipline's role in the development of society's resilience to disasters. International Journal of Disaster Resilience in the Built Environment, 1 (1). pp. 11-24. ISSN 1759-5908

Haigh, Richard and Amaratunga, Dilanthi (2011) A window of opportunity. International Journal of Disaster Resilience in the Built Environment, 2 (2). ISSN 1759-5908

Haigh, Richard, Amaratunga, Dilanthi and Keraminiyage, Kaushal (2006) An exploration of the construction industry's role in disaster preparedness, response and recovery. In: The construction and building research conference of the Royal Institution of Chartered Surveyors. RICS. ISBN 9781842193074

Haigh, Richard, Amaratunga, Dilanthi and Kulatunga, Udayangani (2007) Performance measurement in construction research and development. International Journal of Productivity and Performance Management, 56 (8). pp. 673-688. ISSN 1741-0401

Haigh, Richard, Amaratunga, Dilanthi, Liyanage, Champika, Ginige, Kanchana, Arambepola, S. and Dutta, Rishiraj (2015) South Asia regional position paper on Horizon 2020 societal challenges. Research Report. CASCADE.

Haigh, Richard, Amaratunga, Dilanthi and Sarshar, Marjan (2001) SPICE FM (Structured process improvement for construction environments - facilities management ). Technical Report. University of Salford, Salford, UK.

Haigh, Richard and Sutton, Richard (2012) Strategies for the effective engagement of multi-national construction enterprises in post-disaster building and infrastructure projects. International Journal of Disaster Resilience in the Built Environment, 3 (3). pp. 270-282. ISSN 1759-5908

Haigh, Richard P. (2018) Technology Enhancements for Next Generation Radiation Detectors. Masters thesis, University of Huddersfield.

Hajjaji, Mufeed, Denton, Paul and Jackson, Steve (2010) The effectiveness of using project management tools and techniques for delivering projects. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 124-129. ISBN 9781862180932

Hala, Albert and Unver, Ertu (1998) Animated Reconstruction of Forensic Animation. Solicitors Journal: Expert Witness Supplement, 142 SJ. p. 24. ISSN 0038 1047

Hales, Derek (2011) The Decadence of Mimetic Science: Against Nature 2.0. In: Workshop Proceedings of the 7th International Conference on Intelligent Environments. IOS Press, Amsterdam, The Netherlands, pp. 312-321. ISBN 978-1-60750-794-9

Hales, Derek (2008) Emergent objects portfolio project. UNSPECIFIED. (Unpublished)

Hales, Derek (2006) Locating multimedia practice in the internet of things. Leonardo Electronic Almanac, 14 (3). ISSN 1071-4391

Hall, David, Herr, G.H., McKinna, A. and Linde, H.J. (2001) Measuring innovation for agile manufacturing: insights and clarifications for management. International Society for Agile Manufacturing, 4 (1). pp. 85-95.

Hall, David, McKinna, A. and Thake, G. (2003) Structured problem-solving techniques to stimulate innovation in new product development in UK SMEs. Industry and Higher Education, 17 (2). pp. 139-142. ISSN 0950-4222

Hamad, Naima (2019) THE ANALYSIS OF POWER SUPPLY SIGNALS BY INCLUDING PHASE EFFECTS FOR MACHINE FAULT DIAGNOSIS. Doctoral thesis, University of Huddersfield.

Hamad, Naima, Brethee, Khaldoon F., Gu, Fengshou and Ball, Andrew (2016) An Investigation of Electrical Motor Parameters in a Sensorless Variable Speed Drive for Machine Fault Diagnosis. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328

Hamed, M., Tesfa, Belachew, Aliwan, M., Li, G., Gu, Fengshou and Ball, Andrew (2013) The Influence of Vehicle Tyres Pressure on the Suspension System Response by Applying the Time-Frequency Approach. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. ICAC 2013 . Brunel University, London, UK. ISBN 978-1908549082

Hamed, M., Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2013) A study of the influence of vehicle tyre pressure on suspension system response using a full car model. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 7-12. ISBN 9781862181212

Hamed, Moamar (2016) Characterisation of the Dynamics of an Automotive Suspension System for On-line Condition Monitoring. Doctoral thesis, University of Huddersfield.

Hamilton, J. and Southern, Jen (2002) Distance Made Good. The Gallery, Stratford-on-Avon, Stratford-on-Avon. ISBN 0-9541184-2-1

Hamilton, J. and Southern, Jen (2004) Distance Made Good: Liquid Spaces. In: Ciberart Bilbao 2004, 23-30 April 2004, Bilbao, Spain.

Hamilton, J. and Southern, Jen (2003) Off the Map: Cartographies in Transit. [Show/Exhibition]

Hamley, Ian W., Fairclough, Patrick A., Ryan, Anthony J., Bates, F.S. and Towns-Andrews, Elizabeth (1996) Crystallization of nanoscale-confined diblock copolymer chains. Polymer, 37 (19). pp. 4425-1129. ISSN 0032-3861

Hamley, Ian W., Fairclough, Patrick A., Terrill, Nicholas J., Ryan, Anthony J., Lipic, Paul M., Bates, F.S. and Towns-Andrews, Elizabeth (1996) Crystallization in Oriented Semicrystalline Diblock Copolymers. Macromolecules, 29 (27). pp. 8835-8843. ISSN 0024-9297

Hamley, Ian W., Pople, J.A., Gleeson, A. J., Komanschek, Bernd U. and Towns-Andrews, Elizabeth (1998) Simultaneous Rheology and Small-Angle Scattering Experiments on Block Copolymer Gels and Melts in Cubic Phases. Journal of Applied Crystallography, 31 (6). pp. 881-889. ISSN 0021-8898

Hamomd, Osama, Ball, Andrew, Gu, Fengshou and Thobiani, F. (2013) Pump Rotor System Monitoring Based on Advanced Measurements and Analysis Techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 230. ISBN 9781862181212

Hamomd, Osama H. I. (2018) Compound Fault Diagnosis of Centrifugal Pumps Using Vibration Analysis Techniques. Doctoral thesis, University of Huddersfield.

Hamza-Lup, Felix G and White, Stephen (2015) Hybrid Course Delivery: Impact on Learning and Assessment. In: The Seventh International Conference on Mobile, Hybrid, and On-line Learning. eLmL 2015 . IARIA, Lisbon, Portugal, pp. 48-54. ISBN 978-1-61208-385-8

Hanea, Daniela, Hanea, Anca, Ale, Ben, Sillem, Simone, Lin, Pei Hui, Van Gulijk, Coen and Hudson, Patrick (2012) Using dynamic Bayesian networks to implement feedback in a management risk model for the oil industry. In: 11th International Probabilistic Safety Assessment and Management Conference and the Annual European Safety and Reliability Conference 2012 (PSAM11 ESREL 2012). IAPSAM & ESRA, pp. 691-700. ISBN 9781622764365

Hanif, Imran (2017) Ion Irradiation Modification of Silicon Nanowires. Doctoral thesis, University of Huddersfield.

Hanif, Imran, Hinks, J. A. and Donnelly, S. E. (2013) Transmission Electron Microscopy of Amorphisation and Recrystallisation of Silicon Nanowires under in situ Ion Irradiation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 231. ISBN 9781862181212

Haq, Khawaja Al-Musavar-Ul (2014) Modelling and testing the definitions of teleworking within a local council environment. Doctoral thesis, University of Huddersfield.

Haram, Mansaf, Wang, Tie, Gu, Fengshou and Ball, Andrew (2011) An Investigation of the Electrical Response of A Variable Speed Motor Drive for Mechanical Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 867-874. ISBN 0954130723

Hardaker, Glenn (1998) An integrated approach towards product innovation in international manufacturing organisations. European Journal of Innovation Management, 1 (2). pp. 67-73. ISSN 14601060

Hardaker, Glenn, Ahmed, Pervaiz K. and Graham, Gary (1998) An integrated response towards the pursuit of fast time to market of NPD in European manufacturing organisations. European Business Review, 98 (3). pp. 172-177. ISSN 0955534X

Hardaker, Glenn and Graham, Gary (2008) Community of self-organisation: supply chain perspective of Finnish electronic music. International Journal of Technology Management, 44 (1/2). pp. 93-114. ISSN 0267-5730

Hardaker, Glenn and Graham, Gary (2003) Impact on online technologies for e-music supplier networks. Journal of Services Research, 3 (1). pp. 5-23. ISSN 0972-4702

Hardaker, Glenn and Sabki, Aishah (2010) Learning Styles and Personal Pedagogy in the Virtual Worlds of Learning. In: Style Differences in Cognition, Learning, and Management: Theory, Research, and Practice. Routledge Studies in Management, Organizations and Society . Routledge. ISBN 9780415801997

Hardaker, Glenn, Sabki, Aishah and Dockery, Richard (2010) Cognitive Learning Styles and Digital Equity: Searching for the Middle Way. International Journal of Inclusive Education, 14 (8). pp. 777-794. ISSN 1360-3116

Harford, Jeffrey J., Chew, Michael W., Squire, John M. and Towns-Andrews, Elizabeth (1991) Crossbridge states in isometrically contracting fish muscle: Evidence for swinging of myosin heads on actin. Advances in Biophysics, 27. pp. 45-61. ISSN 0065-227X

Hargreaves, J.A. and Wankling, Matthew (2011) Implementing wave field synthesis in an ITU spec listening room part 2: Bass without modes. In: Reproduced Sound RS 2011: Sound Systems Engineering or Art, 16th-18th November 2011, Brighton, UK. (Unpublished)

Harmer, Wesley (2022) Investigating the impact of a non-pharmaceutical online intervention on anxiety and subsequent working memory function. Masters thesis, University of Huddersfield.

Hart, Jacob (2021) Performance cartography, performance cartology: Musical networks for computational musicological analysis. Doctoral thesis, University of Huddersfield.

Hart, Tina, Fellowes, Melanie and Jabbar, Abdul (2011) The challenges of student engagement on GDL blended learning. In: The Sixth International Blended Learning Conference, 15th June 2011, University of Hertfordshire, Hatfield, Herts., UK.. (Unpublished)

Hasan, Abbas (2010) Multiphase Flow Rate Measurement Using a Novel Conductance Venturi Meter: Experimental and Theoretical Study In Different Flow Regimes. Doctoral thesis, University of Huddersfield.

Hasan, Abbas (2009) Multiphase Flow Rate Measurement Through A Conductance Venturi Meter. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Hasan, Abbas and Lucas, Gary (2007) Modeling of a homogenous gas-water two phase flow through a Venturi and vertical pipe (A prediction of pressure drop sign change in two phase flow). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Hasan, Abbas and Lucas, Gary (2008) Simulation and static measurement of the gas volume fraction in a separated flow model using a Conductance Multiphase Venturi Meter (CMVM). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 69-74. ISBN 978-1-86218-067-3

Hassan, Mothana A., Martin, Haydn and Jiang, Xiangqian (2014) Surface profile measurement using spatially dispersed short coherence interferometry. Surface Topography: Metrology and Properties, 2 (2). 024001. ISSN 2051-672X

Hassan, Mothana A. (2015) Surface Profile Measurement Using Spatially Dispersed Short Coherence Interferometry. Doctoral thesis, University of Huddersfield.

Hassan, Mothana A., Martin, Haydn and Jiang, Xiang (2013) Investigations on measurement speed of spatially dispersed short coherence interferometer. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 43-48. ISBN 9781862181212

Hassan, Mothana A., Martin, Haydn and Jiang, Xiangqian (2017) Development of a spatially dispersed short-coherence interferometry sensor using diffraction grating orders. Applied Optics, 56 (22). pp. 6391-6397. ISSN 1559-128X

Hassan, Rosilah, Irvine, James and Glover, Ian (2008) Design and Analysis of Virtual Bus Transport Using Synchronous Digital Hierarchy/Synchronous Optical Networking. Journal of Computer Science, 4 (12). pp. 1003-1011. ISSN 1549-3636

Hassan, Rosilah, Irvine, James and Glover, Ian (2007) Designing of Data Link Layer for Virtual Bus Architecture. In: The 9th International Conference on Advanced Communication Technology. IEEE, pp. 1978-1982. ISBN 9788955191318

Hasse, F., Lockwood, S. and Ford, Derek G. (2001) Vibration modelling of machine tool structures. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 137-146. ISBN 9781853128905

Hassin, Osama (2013) Different Signal Processing Techniques for Predicting the Condition of Journal Bearings. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 232. ISBN 9781862181212

Hassin, Osama, Yao, Aiying, Wei, Nasha, Gu, Fengshou and Ball, Andrew (2016) Monitoring Oil Levels Of Journal Bearings Based On The Analysis Of Vibration Signals. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Hatwesh, Ashraf (2018) On-Line Identification of Ball-Screw Drive Dynamics Under Machining Conditions. Doctoral thesis, University of Huddersfield.

Hatwesh, Ashraf, Fletcher, Simon and Longstaff, Andrew P. (2013) Precise Position Control of Machine Tool Feed Drives in the Presence of Load Perturbation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 146-151. ISBN 9781862181212

Hayes, K. and Keraminiyage, Kaushal (2013) The Effective Management of Remote Projects: Lessons from Other Jurisdictions for the Scottish Highlands and Islands. In: International Post Graduate Research Conference: IPGRC 2013, 8th-10th April 2013, Salford, UK.

Hayhurst, D. R., Makin, J., Wong, M. T. and Xu, Qiang (2005) Modelling of combined creep and cyclic plasticity in a model component undergoing ratchetting using continuum damage mechanics. Philosophical Magazine, 85 (16). pp. 1701-1728. ISSN 1478-6435

Hazell, Philippa Kay (2021) Enhanced Performance of Embedded Sensor Data Acquisition using Non-linear Chaos Based Systems. Doctoral thesis, University of Huddersfield.

Hefny, Reham M.H., Kollar, László E. and Farzaneh, Masoud (2014) Modeling the influence of periodic loads on snow detachment from suspended cables. Cold Regions Science and Technology, 101. pp. 31-39. ISSN 0165232X

Hefny, Reham M.H., Kollar, László E. and Farzaneh, Masoud (2012) Simulation of Snow Adhesion on Real-Scale Lines. International Journal of Mechanical Engineering and Mechatronics, 1 (1). pp. 102-108. ISSN 1929-2724

Henrich, Guilherme, Abbott, Carl and Koskela, Lauri (2006) Drivers for Innovation in Production Management. In: Proceedings of IGLC 14: 14th Annual Conference of the International Group for Lean Construction. IGLC, pp. 533-541.

Henrich, Guilherme, Tilley, Paul and Koskela, Lauri (2005) Context of Production Control in Construction. In: 13th International Group for Lean Construction Conference, 19-21st July 2005, Sydney, Australia. (Unpublished)

Hepworth, Georgia (2021) Narcissus, Self-Surveillance, and the Virtual Doppelgänger: To what extent do these terms exist in selfie and photographic culture, and what psychological and sociological influences do they have? Masters thesis, University of Huddersfield.

Herranz, L., Bordas, Joan, Towns-Andrews, Elizabeth, Mendez, E., Usobiaga, P. and Carrascosa, J.L. (1990) Conformational changes in bacteriophage Ø 29 connector prevents DNA-binding activity*. Journal of Molecular Biology, 213 (2). pp. 263-273. ISSN 0022-2836

Hewitt, Scott (2009) The Laptop As An Ensemble Instrument-Methods And Concerns. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Hewson, P. (2005) Method for estimating tyre cornering stiffness from basic tyre information. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 219 (12). pp. 1407-1412. ISSN 0954-4070

Hibbert, Stephen (2015) Combining the virtual and physical interaction environment. In: Serious Games. First Joint International Conference, JCSG 2015, Huddersfield, UK, June 3-4, 2015, Proceedings, 1 (9090). Springer International Publishing, UK, pp. 191-194. ISBN 978-3-319-19125-6

Hibbert, Stephen (2022) Exploring the role of lived time and co-presence in culturally consumptive mixed reality environments. Doctoral thesis, University of Huddersfield.

Hickling, Luke (2021) Building an Immersive World. Masters thesis, University of Huddersfield.

Higgins, Joshua (2019) Towards Modern, Accessible and Dynamic HPC Using Container-based Virtual Clusters. Doctoral thesis, University of Huddersfield.

Hinchcliffe, Vanessa (2009) Internet Mediated Research: Synchronous Online Interviewing and Web-Based Diaries As Opportunities for Data Collection with Participants with Disabilities. In: Fourth International Conference on Interdisciplinary Social Sciences, University of Athens, Greece 8-11 July 2009, 8-11 July 2009, University of Athens, Greece. (Unpublished)

Hinchcliffe, Vanessa (2009) Internet Mediated Research: The Viability of Synchronous Online Interviewing and Web-Based Diaries for Data Collection with Participants with Social Communication Difficulties. International Journal of Interdisciplinary Social Sciences, 4 (1). pp. 181-198. ISSN 1833-1882

Hinchcliffe, Vanessa (2008) Social and Virtual Networks: Evaluating Synchronous Online Interviewing using Instant Messenger. In: 9th Inter-University Graduate Conference: Constructions, discourse and representations, 17 May 2008, University of Cambridge.

Hinchcliffe, Vanessa (2009) Synchronous Online Interviewing, Instant Messenger and Web-Based Diaries with Participants with Social Communication Difficulties: Group Consideration of Ethical Issues in Online Qualitative Research. In: Psychology Postgraduate Affairs Group (PsyPAG) Workshops - Exploring New Innovative and Emerging Methods in Qualitative Research., 26th November 2009, University of Salford, UK. (Unpublished)

Hinchcliffe, Vanessa and Gavin, Helen (2009) Social and Virtual Networks: Evaluating Synchronous Online Interviewing Using Instant Messenger. The Qualitative Report, 14 (2). pp. 318-340. ISSN 1052-0147

Hnich, Brahim, Smith, Barbara M. and Walsh, Toby (2004) Dual modelling of permutation and injection problems. Journal of Artificial Intelligence Research, 21. pp. 357-391. ISSN 1076-9757

Holbrook, David (2010) Noise: Using Location Recordings for Computer Compositions. Masters thesis, University of Huddersfield.

Holburn, David M., Joyner, Valencia M., Samsudin, Rina J., Lalithambika, Vinod A., Bellon, Jacques A., Sibley, Martin J.N. and Mears, Robert J. (2002) Integrated CMOS transmitter driver and diversity receiver for indoor optical wireless links. Proceedings of SPIE, 4873. pp. 13-22. ISSN 0277-786X

Holland, Matthew James (2021) Development of a method for the quantification of volumetric wear on incongruent articulating surfaces of Total Joint Replacement prostheses through the use of coordinate metrology and mathematical fitting techniques. Doctoral thesis, University of Huddersfield.

Holmes, Violeta and MacFarlane, Katrinna (2009) Agent Mediated Information Exchange. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Holmes, Violeta and Newall, Matthew (2016) HPC and the Big Data challenge. Safety and Reliability: SaRS Journal, 36 (3). pp. 213-224. ISSN 0961-7353

Holroyd, Geoffrey (2007) The modelling and correction of ball-screw geometric, thermal and load errors on CNC machine tools. Doctoral thesis, The University of Huddersfield.

Holroyd, Geoffrey, Fletcher, Simon and Myers, Alan (2005) Modelling the dynamic behaviour of a ballscrew system taking into account the changing position of the ballscrew nut. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2001) Identification of damping elements in CNC machine tool drive. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 289-299. ISBN 9781853128905

Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2003) Modelling the dynamic behaviour of a ball-screw system taking into account the changing position of the ball-screw nut. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 337-347. ISBN 9781853129902

Hooi Leng, Lee (2002) Application of product data management within the product development process. Doctoral thesis, University of Huddersfield.

Horne, Nicholas (2017) A PC-based three-phase system analyser. Fields: journal of Huddersfield student research, 3 (1). ISSN 2057-0163

Hosseyndoust Foomany, Farbod (2010) Analysis of Voiceprint and Other Biometrics for Criminological and Security Applications. Doctoral thesis, University of Huddersfield.

Howell, Gregory A. and Koskela, Lauri (2000) Reforming Project Management: The Role of Lean Construction. In: 8th Annual Conference of the International Group for Lean Construction, 17-19th July 2000, Brighton. (Unpublished)

Howell, J.R., Blunt, Liam, Doyle, C., Hooper, R.M., Lee, A.C. and Ling, R.S.M. (2004) In Vivo surface wear mechanisms of femoral components of cemented total hip arthroplasties the influence of wear mechanism on clinical outcome. The Journal of Arthroplasty, 19 (1). pp. 88-101. ISSN 0883-5403

Howson, Sean (2020) The development of a platform intended to integrate industrial networking protocol into range of ultrasonic flowmeters. Masters thesis, University of Huddersfield.

Hu, L., Hu, G., Qin, F. and Gu, Fengshou (2011) Turbopump Condition Monitoring Using Incremental Clustering and One-class Support Vector Machine. Chinese Journal of Mechanical Engineering, 24 (3). pp. 474-479. ISSN 1000-9345

Hu, Lei, Hu, Niaoqing, Zhang, Xinpeng, Gu, Fengshou and Gao, Ming (2013) Novelty detection methods for online health monitoring and post data analysis of turbopumps. Journal of Mechanical Science and Technology, 27 (7). pp. 1933-1942. ISSN 1976-3824

Hua, Chen, Chunyan, Tang, Yuexin, Yang, Yan, Cao, Zhoui, Fang, Rujia, Zhao and Lu, Joan (2006) On-line news management system based on ASP and XML. In: Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP 2006. CSREA Press, pp. 302-305. ISBN 1-60132-005-1

Hua, Chen, Qingli, Lv, Yan, Cao, Baolong, Liu, Li, Yuan, Rujia, Zhao and Lu, Joan (2006) Examining analysis and evaluation system based on XML. In: Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP 2006. CSREA Press, pp. 322-326. ISBN 1-60132-005-1

Hua, Chen, Yan, Cao, Rujia, Zhao and Lu, Joan (2005) Product design scheme decision-making system based on CBR coupled with ANN. Proceedings of the Ninth International Conference on Computer Supported Cooperative Work in Design, 2005, 2. pp. 856-860. ISSN ISBN: 1-84600-002-5

Hua, Chen, Yang, Yuexin, Yan, Cao, Bo, Sun, Rujia, Zhao and Lu, Joan (2005) XML based Installation Agriculture Technology Markup Language - IATML. In: Proceedings of The 2005 International Conference on Internet Computing, ICOMP 2005. CSREA Press, pp. 10-15. ISBN 1-932415-69-6

Huang, Yuxiang (2021) Open Area Concealed Weapon Detection (CWD) Sensor System Development. Doctoral thesis, University of Huddersfield.

Hughes, Peter, Figueres-Esteban, Miguel and Van Gulijk, Coen (2016) Learning from text-based close call data. Safety and Reliability: SaRS Journal. ISSN 0961-7353

Hughes, Braham C. and Wakefield, Jonathan P. (2015) An Investigation Into Plausibility In the Mixing of Foley Sounds In Film And Television. In: 138th International Audio Engineering Society Convention 2015, 7th - 10th May 2015, Warsaw, Poland.

Hughes, D.J., Mahendrasingam, A., Heeley, E.L., Oatway, W.B., Martin, Christine, Towns-Andrews, Elizabeth and Fuller, W. (1996) Time-Resolved Simultaneous SAXS/WAXS of the Drawing of Polyethylene at the Daresbury SRS. Journal of Synchrotron Radiation, 3 (2). pp. 84-90. ISSN 0909-0495

Hughes, Jack Bryan (2018) Real-time Link Quality Estimation and Holistic Transmission Power Control for Wireless Sensor Networks. Doctoral thesis, University of Huddersfield.

Hughes, Jack Bryan, Lazaridis, Pavlos, Glover, Ian and Ball, Andrew (2017) A Survey of Link Quality Properties Related to Transmission Power Control Protocols in Wireless Sensor Networks. In: 2017 23rd IEEE International Conference on Automation and Computing (ICAC). Institute of Electrical and Electronics Engineers Inc.. ISBN 9780701702618, 9780701702601

Hughes, Peter (2021) Validation of safety risk prediction tools and traffic models for railway level crossings. Doctoral thesis, University of Huddersfield.

Hughes, Peter, Figueres-Esteban, Miguel and Van Gulijk, Coen (2016) From negative statements to positive safety. In: Risk, Reliability and Safety: Innovating Theory and Practice: Proceedings of ESREL 2016. CRC Press. ISBN 9781138029972

Hussain, Shahnawaz and Chen, Xun (2008) Remote milling tool-wear monitoring and direct wear features extraction by image processing. International Journal of Internet Manufacturing and Services, 1 (3). pp. 246-261. ISSN 1751-6048

Hussein, Hawre (2020) Optimal Design of a Multi-Phase Pipeline. Doctoral thesis, University of Huddersfield.

Ibrahim, D., Lu, Joan, Allen, Gary and Yip, Yau Jim (2007) Schema based approach of mapping XML documents to relational database. In: Proceedings of the 2007 International Conference on Internet Computing. CSREA Press, pp. 332-338. ISBN 1601320442

Ifeonu, Robert Odera (2014) Investigating the impact of technology trust on the acceptance of mobile banking technonlgy within Nigeria. Doctoral thesis, University of Huddersfield.

Ifeonu, Robert Odera and Ward, Rupert (2015) The Impact Of Technology Trust On The Acceptance Of Mobile Banking Technology Within Nigeria. IEEE African Journal of Computing & ICTs, 8 (4). ISSN 2006-17811

Ifeonu, Robert Odera and Ward, Rupert (2017) Towards A Comprehensive Framework For Measuring Technology Trust: The Case Of Mobile Banking Adoption In Nigeria. International Journal of Computer and Information Technology, 6 (1). ISSN 2279-0764

Ighoroje, Lamogha (2018) Hybrid Automated Machine Learning System for Big Data. Doctoral thesis, University of Huddersfield.

Ighoroje, Lamogha, Lu, Joan and Xu, Qiang (2016) Hybrid classification system design using a decision learning approach and three layered structure - A meta learning paradigm in Data Mining. In: ISD 2016 Proceedings. ISD. ISBN 978-83-7875-307-0

Ihnissi, Ragab and Lu, Joan (2015) An Investigation into Game Based Learning Using High Level Programming Languages. In: Proceedings of The Fifth International Conference on Advanced Communications and Computation. INFOCOMP (2015). IARIA, Brussels, Belgium, pp. 99-104. ISBN 978-1-61208-416-9

Ihnissi, Ragab and Lu, Joan (2014) An investigation into the problems of user oriented interfaces in mobile applications. In: ICOMP14: The 2014 International Conference on Internet Computing and Big Data, 21st-24th July 2014, Las Vegas, Nevada, USA. (Unpublished)

Ihnissi, Ragab Basher (2017) Investigation of a Novel Formal Model for Mobile User Interface Design. Doctoral thesis, The University of Huddersfield.

Ikram, Ahsan, Anjum, Ashiq, Hill, Richard, Antonopoulos, Nick, Liu, Lu and Sotiriadis, Stelios (2015) Approaching the Internet of things (IoT): a modelling, analysis and abstraction framework. Concurrency and Computation: Practice and Experience, 27 (8). pp. 1966-1984. ISSN 1532-0626

Ince, Can (2019) Programming For Music: Explorations in Abstraction. Masters thesis, University of Huddersfield.

Ingirige, Bingunath, Amaratunga, Dilanthi, Keraminiyage, Kaushal and Baldry, David (2005) Leveraging distance learning tools for broadbasing education in construction industry disciplines: The importance of a continuous social discourse. In: RICS COBRA Conference (held as part of the QUT Research week), 3-8th July 2005, Queensland University of Technology, Brisbane, Australia. (Unpublished)

Ingleby, Michael and West, Margaret M. (2003) Causal influence coefficients: a localised maximum entropy to Bayesian inference. In: Mathematical and Statistical Methods in Reliability. Series on quality, reliability and engineering statistics, 7 . World Scientific, pp. 45-57. ISBN 9789812383211

Ipatova, I., Harrison, Robert W., Terentyev, D., Donnelly, Stephen E. and Jimenez-Melero, E. (2017) Thermal Evolution of the Proton Irradiated Structure in Tungsten–5 wt% Tantalum. Journal of Fusion Energy, 36 (6). pp. 234-239. ISSN 0164-0313

Iqbal, Saqib (2009) Representing Aspects In Design Model. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Iqbal, Saqib and Allen, Gary (2009) Aspect-oriented design model. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 137-141. ISBN 9781862180857

Iredale, Alison and Mycroft, Louise (2012) Using and resisting Facebook for back channel discussions: two experiences, two views. In: Teacher Training and Technologies Conference 2012, 3rd February 2012, University of Huddersfield.

Irvine, James and Glover, Ian (2009) Implementation of QoS onto Virtual Bus Network. European Journal of Scientific Research, 25 (1). pp. 25-34. ISSN 1450-216X

Ismail, Hasan (2021) Accuracy improvement to low-cost air quality monitoring devices to enable their use in traffic management. Masters thesis, University of Huddersfield.

Iveson, Stephen (2018) Exploring the Concepts of Immersion and why Headphones Enhance the Player Experience in 21st Century Online Competitive Video Games. Masters thesis, University of Huddersfield.

Iwnicki, S. and Bezin, Yann (2001) Simulation as a tool for assessing the match between track and vehicle standards. In: Infrarail 2001: developments in the railway industry. ICE Publishing, pp. 19-23. ISBN 9780727742407

Izod, Toby D. (2018) Electron multiplier supply and signal processing: working towards a system on chip solution. Masters thesis, University of Huddersfield.

Jackson, Frankie. F (2018) Aerodynamic optimisation of Formula student vehicle using computational fluid dynamics. Fields: journal of Huddersfield student research, 4 (1). ISSN 2057-0163

Jackson, Mark J., Khangar, A., Chen, Xun, Robinson, Grant M., Venkatesh, V.C. and Dahotre, N.B. (2007) Laser cleaning and dressing of vitrified grinding wheels. Journal of Materials Processing Technology, 185 (1-3). pp. 17-23. ISSN 0924-0136

Jackson, Mark J., Robinson, Grant M. and Chen, Xun (2006) Laser Surface Preparation of Vitrified Grinding Wheels. Journal of Materials Engineering and Performance, 15 (2). pp. 247-250. ISSN 1059-9495

Jackson, Mark J., Robinson, Grant M. and Chen, Xun (2007) Laser processing of high performance grinding wheels. International Journal of Manufacturing Technology and Management, 12 (1/2/3). pp. 3-24. ISSN 1368-2148

Jacob, P J, Gu, Fengshou and Ball, Andrew (1999) Non-parametric models in the monitoring of engine performance and condition: Part 1: modelling of non-linear engine processes. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 213 (1). pp. 73-81. ISSN 0954-4070

Jafari, Mohammad (2020) Boundary Layer Flow Separation Control by Synthetic Jet Actuators. Doctoral thesis, University of Huddersfield.

Jaiswal, Jay, Blair, Stephen, Stevens, Andy, Kay, Tom, Iwnicki, S. and Bezin, Yann (2002) A systems approach to evaluating rail life. In: Railway Engineering Conference, 3-4th July 2002, London. (Unpublished)

Jan, Steven (2015) Computer Simulation of Musical Evolution: A Lesson from Whales. In: Study Day on Computer Simulation of Musical Creativity, 27th June 2015, University of Huddersfield, UK.

Jeffries, Karl and Hardaker, Glenn (2003) Designing an On-line Learning & Creativity Profile Generator: A Fusion of Learning Styles, Creativity Diagnostics and LMS. In: 8th Annual Conference of the European Learning Styles information Network (ELSIN), 30 June - 2 July 2003, University of Hull.

Jenkinson, D.P., Crampton, Andrew, Mason, John C., Cox, M.G., Forbes, Alistair B. and Boudjemae, R. (2004) Parameterised approximation estimators for mixed noise distributions. In: Advanced Mathematical & Computational Tools In Metrology Vi. Series on Advances in Mathematics for Applied Sciences, 66 . World Scientific, pp. 67-81. ISBN 978-981-238-904-6

Jennifer, Smith (2020) Worldbuilding Voices in the Soundscapes of Role Playing Video Games. Doctoral thesis, University of Huddersfield.

Jeong, K. S., Haigh, Richard and Amaratunga, Dilanthi (2006) Delivering public sector efficiencies: The potential role of capability maturity models in construction. In: 3rd International SCRI Research Symposium, April 2006, Delft University, Netherlands.. (Unpublished)

Jeong, K. S., Kagioglou, Mike, Haigh, Richard, Amaratunga, Dilanthi and Siriwardena, M. L. (2006) Embedding good practice sharing within process improvement. Engineering Construction and Architectural Management, 13 (1). pp. 62-81. ISSN 0969-9988

Jeong, K. S., Siriwardena, Mohan, Amaratunga, Dilanthi, Haigh, Richard and Kagioglou, Mike (2004) Structured process improvement for construction enterprises (SPICE) level 3: establishing a management infrastructure to facilitate process improvement at an organisational level. In: 1st Salford Centre for Research and Innovation (SCRI) Symposium, 2004, The University of Salford. (Unpublished)

Jeong, K. S., Siriwardena, Mohan, Haigh, Richard, Amaratunga, Dilanthi and Kagioglou, Mike (2004) Structured process improvement for construction enterprises (SPICE) level 3: Establishing a management infrastructure to facilitate process improvement at an organisational level: Industry report. Technical Report. EPSRC, Swindon. (Unpublished)

Jeong, K. S., Siriwardena, Mohan, Haigh, Richard, Amaratunga, Dilanthi, Kagioglou, Mike and Sarshar, Marjan (2004) How to share good practice in your organisation. Technical Report. EPSRC, Swindon. (Unpublished)

Jiang, J, Gennish, R., Gu, Fengshou, Ball, Andrew, Jiao, F, Tao, T, Li, X and Liu, K (2006) An Investigation of acoustic measurements in the exhaust system for diesel engine combustion monitoring. In: Structure health monitoring conference, 5-7 July 2006, Spain.

Jiang, Xiang (2011) In situ real-time measurement for micro-structured surfaces. CIRP Annals - Manufacturing Technology, 60 (1). pp. 563-566. ISSN 0007-8506

Jiang, Xiang (2004) Recent advances in micro-manufacturing and micro-system. In: The 6th International Conference on Frontiers of Design and Manufacturing, 20th-24th June, 2004, Xi'an, China. (Unpublished)

Jiang, Xiang (2007) The economic management of geometrical products variability: the next generation GPS. In: 4th International CIRP-Sponsored Conference (DET2007) on Digital Enterprise Technology, 19-21 September 2007, University of Bath, UK. (Unpublished)

Jiang, Xiang, Abdul-Rahman, Hussein S. and Scott, Paul J. (2013) Lifting wavelet algorithm for freeform surface filtering using a Gaussian prediction operator. International Journal of Precision Technology, 3 (3). pp. 244-260. ISSN 1755-2060

Jiang, Xiang and Blunt, Liam (2001) Advances in surface analysis technology. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 247-258. ISBN 9781853128905

Jiang, Xiang and Blunt, Liam (2003) Surface analysis techniques to optimise the performance of CNC machine tools. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 107-117. ISBN 9781853129902

Jiang, Xiang, Blunt, Liam and Stout, K.J. (2001) Application of the lifting wavelet to rough surfaces. Precision Engineering, 25 (2). pp. 83-89. ISSN 0141-6359

Jiang, Xiang, Blunt, Liam and Stout, K.J. (2000) Development of a lifting wavelet representation for surface characterization. Proceedings of The Royal Society A Mathematical Physical and Engineering Sciences, 456 (2001). pp. 2283-2313. ISSN 13645021

Jiang, Xiang, Blunt, Liam and Stout, K.J. (2001) Lifting wavelet for three-dimensional surface analysis. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2163-2169. ISSN 0890-6955

Jiang, Xiang, Lin, D., Blunt, Liam, Zhang, W. and Zhang, L. (2006) Investigation of some critical aspects of on-line surface measurement by a wavelength-division-multiplexing technique. Measurement Science and Technology, 17. pp. 483-487. ISSN 0957-0233

Jiang, Xiang and Mahadevan, S. (2006) Bayesian cross-entropy methodology for optimal design of validation experiments. Measurement Science and Technology, 17. pp. 1895-1908. ISSN 0957-0233

Jiang, Xiang, Martin, Haydn and Wang, Kaiwei (2007) Vibration compensating beam scanning interferometer for surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield.

Jiang, Xiang and Scott, Paul J. (2003) Review of surface texture work in ISO. In: 9th International Conference on Metrology and Properties of Engineering Surfaces, 10th-11th September 2003, Halmstad University, Sweden. (Unpublished)

Jiang, Xiang, Scott, Paul J. and Whitehouse, D.J. (2007) Freeform surface characterisation - a fresh strategy. CIRP Annals - 2007, 56 (1). pp. 553-556. ISSN 1726-0604

Jiang, Xiang, Scott, Paul J., Whitehouse, D.J. and Blunt, Liam (2007) Paradigm shifts in surface metrology. Part I. Historical philosophy. Proceedings of The Royal Society A Mathematical Physical and Engineering Sciences, 463 (2085). pp. 2049-2070. ISSN 1364-5021

Jiang, Xiang, Scott, Paul J., Whitehouse, D.J. and Blunt, Liam (2007) Paradigm shifts in surface metrology. Part II. The current shift. Proceedings of the Royal Society, A, 463 (2085). pp. 2071-2099. ISSN 1364-5021

Jiang, Xiang, Shore, Paul, McKeown, Pat, Whitehouse, David J. and Ruffles, Phillip C. (2012) Ultra-precision engineering: from physics to manufacturing. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 3831-3834. ISSN 1364-503X

Jiang, Xiang and Whitehouse, D.J. (2005) 7th International Symposium on Measurement Technology and Intelligent Instruments. Journal of Physics, Confer. ISSN 1742-6596

Jiang, Xiang and Whitehouse, D.J. (2006) Miniaturized optical measurement methods for surface nanometrology. CIRP Annals - Manufacturing Technology, 55 (1). pp. 577-580. ISSN 0007-8506

Jiang, Xiang and Whitehouse, David J. (2012) Technological shifts in surface metrology. CIRP Annals - Manufacturing Technology, 61 (2). pp. 815-836. ISSN 0007-8506

Jiang, Xiang, Zeng, Wenhan, Scott, Paul J. and Ma, J.W. (2008) Linear feature extraction based on complex ridgelet transform. Wear, 264 (5-6). pp. 428-433. ISSN 0043-1648

Jiang, Xiang, Zeng, Wenhan, Smith, I., Scott, Paul J. and Maletras, F. (2007) The detection of transient behaviour in environmental vibration for the Watt balance. Measurement Science and Technology, 18 (5). pp. 1487-1494. ISSN 0957-0233

Jilani, Aisha (2010) Mobile Phone Text Processing and Question-Answering. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 130-135. ISBN 9781862180932

Jilani, Rabia and Kitchin, Diane E. (2013) A Brief Review of Automated Knowledge Engineering Tools for Artificial Intelligence Planning & Scheduling. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 152-158. ISBN 9781862181212

Jimoh, Falilat (2015) A Synthesis of Automated Planning and Model Predictive Control Techniques and its Use in Solving Urban Traffic Control Problem. Doctoral thesis, University of Huddersfield.

Jimoh, Falilat, Chrpa, Lukáš and McCluskey, T.L. (2014) The Application of Planning to Urban Traffic Control. In: 24th International Conference on Automated Planning and Scheduling, 21st to 26th of June 2014, Portsmouth, NH, USA.. (Unpublished)

Jimoh, Falilat, Chrpa, Lukáš and Vallati, Mauro (2013) Autonomic System Architecture: An Automated Planning Perspective. In: Artificial Intelligence Applications and Innovations 2013. IFIP Advances in Information and Communication Technology, 412 (121). Springer, Pahpos, Cyprus, pp. 121-130. ISBN 9783642411410

Jimoh, Falilat, McCluskey, T.L, Chrpa, Lukas and Gregory, Peter (2012) Enabling Autonomic Properties in Road Transport System. In: 30th Workshop of the UK Planning And Scheduling Special Interest Group PLANSIG 2012, 13th and 14th of December 2012, Teeside University.

Jimoh, Falilat and McCluskey, T.L. (2013) Self-management in road traffic networks. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 73-79. ISBN 9781862181212

Jimoh, Falilat and McCluskey, T.L. (2016) Towards The Integration of Model Predictive Control into an AI Planning Framework. In: Proceedings of the 34th Workshop of the UK Planning and Scheduling Special Interest Group (PlanSIG). PlanSIG, Huddersfield.

Johnson, Anthony and Mishra, Rakesh (2013) Sustainability principles and their integration into a higher education mechanical engineering undergraduate programme. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 218-223. ISBN 9781862181212

Johnson, Dale (2018) Towards the Perceptual Optimisation of Virtual Room Acoustics. Doctoral thesis, University of Huddersfield.

Johnson, Dale, Harker, Alexander and Lee, Hyunkook (2015) HAART: a new impulse response toolbox for spatial audio research. In: 138th Annual Audio Engineering Society AES Convention, 7th-10th May 2015, Warsaw, Poland.

Johnson, Dale and Lee, Hyunkook (2016) Investigation into the Perceptual Effects of Image Source Method Order. In: Audio Engineering Society 140th International Convention, 4th - 7th June 2016, Paris, France.

Johnson, Dale and Lee, Hyunkook (2017) Just Noticeable Difference in Apparent Source Width Depending on the Direction of a Single Reflection. In: AES 142nd International Conference, 20th-23rd May 2017, Berlin, DE.

Johnson, Dale and Lee, Hyunkook (2016) Taking advantage of geometric acoustics modeling using metadata. In: Interactive Audio Systems Symposium 2016, 23rd September 2016, University of York.

Jones, Janice and Ribchester, Helen (2013) iTeaching and Learning – iPad developments on occupational therapy education. In: College of Occupational Therapists Annual Conference, 2013, October 2013, Glasgow, UK. (Unpublished)

Jones, Janice and Ribchester, Helen (2012) The introduction of iPads to support undergraduate occupational therapy education. In: College of Occupational Therapists Annual Conference, 2012, 12th - 14th June 2012, Glasgow, UK. (Unpublished)

Jones, S.M.R., Glover, Ian, Watson, P.A. and Howell, R.G. (1997) Evidence for the presence of turbulent attenuation on low-elevation angle Earth-space paths. 2. Frequency scaling of scintillation intensity on a 10° path. IEEE Transactions on Antennas and Propagation, 45 (1). pp. 85-92. ISSN 0018-926X

Jones, Stephen M.R., Glover, Ian, Watson, Peter A. and Howell, R.G. (1991) Analysis of INTELSAT-V scintillation data. In: Antennas and Propagation 1991: International Conference Proceedings. IEEE, pp. 379-382. ISBN 9780852965085

Kadhim, Mohammed Abd Al Alah (2021) NUMERICAL STUDY OF TURBULENT SWIRLING FLOWS. Doctoral thesis, University of Huddersfield.

Kagioglou, Mike, Sharp, John M. and Irani, Zahir (2002) Information system flow models for new product development processes: speed and flexibility vs. focus and control. International Journal of Information Technology and Management, 1 (2/3). pp. 168-190. ISSN 1461-4111

Kaili, Khalifa Al, Pathirage, Chaminda and Amaratunga, Dilanthi (2014) Vulnerability of the Emirati Energy Sector for Disaster: A Critical Review. Procedia Economics and Finance, 18. pp. 701-709. ISSN 2212-5671

Kaklauskas, Arturas, Amaratunga, Dilanthi, Haigh, Richard and Kuzminske, Agne (2016) Intelligent mooc for the disaster resilience dprof programme. In: Proceedings of the 6th International Conference on Building Resilience : building resilience to address the unexpected. Massey University / The University of Auckland, pp. 457-466. ISBN 9780473372682

Kaklauskas, Arturas, Amaratunga, Dilanthi and Lill, Irene (2010) The Life Cycle Process Model for Efficient Construction Manager: Conceptual Modelling at the level of Personality and at Micro, Meso and Macro Levels. In: The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors, 2-3 September 2010, Dauphine Université, Paris,.

Kaklauskas, Arturas, Lepkova, Natalija, Amaratunga, Dilanthi, Lill, Irene, Urbonaviciene, Vita, Naimaviciene, Jurga, Budryte, Loreta, Tupenaite, Laura and Kanapeckiene, Loreta (2014) Recommender Thermometer for Measuring the Preparedness for Flood Resilience Management. Procedia Economics and Finance, 18. pp. 377-384. ISSN 2212-5671

Kaklauskas, Arturas, Seniut, Mark, Amaratunga, Dilanthi, Lill, Irene, Safonov, Andrej, Vatin, Nikolai, Cerkauskas, Justas, Jackute, Ieva, Kuzminske, Agne and Peciure, Lina (2014) Text Analytics for Android Project. Procedia Economics and Finance, 18. pp. 610-617. ISSN 2212-5671

Kalman, Tamas, Farzaneh, Masoud, Kollar, László E., McClure, Ghyslaine and Leblond, Andre (2005) Dynamic behavior of iced overhead cables subjected to mechanical shocks. In: 6th International Symposium on Cable Dynamics, 2005, Charleston, South Carolina, USA. (Unpublished)

Kangley, Harvey (2020) Barriers to Implementing PD Process Change in a British Manufacturing SME: A Case Study. Masters thesis, University of Huddersfield.

Karev, Anatolij R., Farzaneh, Masoud, Kollar, László E. and Vaslon, Sandy (2004) Freezing of water in an open channel flow under supercooled ambient conditions - preliminary results. In: 17th International Symposium on Ice, 2004, St Petersburg, Russia. (Unpublished)

Karev, Anatolij R., Farzaneh, Masoud, Kollar, László E. and Vaslon, Sandy (2004) New dynamic aspects of contemporaneous concepts in atmospheric icing modelling. In: 17th International Symposium on Ice, 2004, St Petersburg, Russia. (Unpublished)

Karunasena, G. I., Amaratunga, Dilanthi and Haigh, Richard (2009) Capacity building for post disaster waste management: research methodological perspective. In: Proceedings of the BUHU 9th International Postgraduate Research Conference 2009. Research Institute for the Built and Human Environment (BuHu), University of Salford, pp. 672-680. ISBN 9781905732647

Karunasena, G. I., Amaratunga, Dilanthi and Haigh, Richard (2008) Capacity building for sustainable post disaster waste management: Construction \& demolition waste. In: CIB W89 International Conference on Building Education and research (BEAR), 11-15th February 2008, Sri Lanka. (Unpublished)

Karunasena, G. I., Amaratunga, Dilanthi and Haigh, Richard (2008) Capacity building in post disaster waste management process. In: International conference on social development and transition, 26-28th November 2008, Kathmandu.. (Unpublished)

Karunasena, G. I., Amaratunga, Dilanthi and Haigh, Richard (2010) Capacity building of disaster waste management for disaster risk reduction. In: COBRA 2010 The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors. RICS. ISBN 978-1-84219-619-9

Karunasena, G. I., Amaratunga, Dilanthi and Haigh, Richard (2011) Capacity building towards resilience: context of post disaster waste management. In: International Conference on Building Resilience 2011: Interdisciplinary approaches to disaster risk reduction, and the development of sustainable communities and cities, 19-21st July 2011, Kandalama, Sri Lanka.. (Unpublished)

Karunasena, G. I., Amaratunga, Dilanthi and Haigh, Richard (2010) Capacity building towards sustainability: Context of post disaster waste management. In: International research conference on sustainability in built environment, 18-19th June 2010, Colombo, Sri Lanka. (Unpublished)

Karunasena, G. I., Amaratunga, Dilanthi and Haigh, Richard (2012) Post-disaster construction & demolition debris management: A Sri Lanka case study. Journal of Civil Engineering and Management, 18 (4). pp. 457-468. ISSN 1392-3730

Kassier, Rafael, Lee, Hyunkook, Brookes, Tim and Rumsey, Francis (2005) An informal comparison between surround microphone techniques. In: Audio Engineering Society 118th Convention, 28-31 May 2005, Barcelona, Spain.

Kaushalya, Harshani, Karunasena, Gayani and Amaratunga, Dilanthi (2014) Role of Insurance in Post Disaster Recovery Planning in Business Community. Procedia Economics and Finance, 18. pp. 626-634. ISSN 2212-5671

Keijdener, Chris, de Oliveira Barbosa, Joao Manuel and Metrikine, Andrei (2017) The influence of level ice on the frequency domain response of floaters. Cold Regions Science and Technology. ISSN 0165-232X

Kenan, Thuraya (2015) Improving the Effectiveness of E-Learning Implementation in the School of Engineering at Tripoli University. Doctoral thesis, University of Huddersfield.

Kendal, Sarah, Kirk, Susan, Elvey, Rebecca, Catchpole, Roger and Pryjmachuk, Steven (2016) How a moderated online discussion forum facilitates support for young people with eating disorders. Health Expectations. ISSN 1369-6513

Kendall, S. R. and Rao, H.V. (2000) Detection of multiple solutions using a mid-cell back substitution technique applied to computational fluid dynamics. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 214 (11). pp. 1401-1407. ISSN 09544062

Kendall, S.C., Crampton, Andrew and Mason, John C. (2003) Shape preserving approximation with large sets of scattered data. In: Curve and Surface Fitting: Saint-Malo 2002. Nashboro Press, Brentwood, pp. 89-96. ISBN 0-9728482-1-5

Kennedy, Allan and Ford, Derek G. (2003) From manual grinding to CNC Automation - a major step forward for the rod mill. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 579-588. ISBN 9781853129902

Kenney, Laurence P., Heller, Ben W., Barker, Anthony T., Reeves, Mark L., Healey, T. Jamie, Good, Timothy R., Cooper, Glen, Sha, Ning, Prenton, Sarah and Howard, David (2015) The Design, Development and Evaluation of an Array-Based FES System with Automated Setup for the Correction of Drop Foot. IFAC-PapersOnLine, 48 (20). pp. 309-314. ISSN 2405-8963

Kenny, Brian and Meaton, Julia (2007) Human language technologies and entrepreneurship in the creative industries. In: Entrepreneurship in the creative industries: an international perspective. Edward Elgar, Cheltenham. ISBN 9781845426101

Kenny, Megan (2018) WHO’S FOLLOWING YOU? CYBER VIOLENCE ON SOCIAL MEDIA. Doctoral thesis, University pf Huddersfield.

Keraminiyage, Kaushal, Amaratunga, Dilanthi and Haigh, Richard (2007) Creating an effective higher education partnership between Europe and Asia in the built environment through the use of modern distance learning technologies. In: Education in Changing Environment, September 2007, Salford. (Unpublished)

Keraminiyage, Kaushal, Amaratunga, Dilanthi and Haigh, Richard (2008) Enhancing the capacity of Sri Lankan higher education institutions to meet post disaster recovery challenges. In: 4th International i-Rec Conference : Building resilience, 30th April - 2nd May 2008, Christchurch, New Zealand. (Unpublished)

Keraminiyage, Kaushal, Amaratunga, Dilanthi and Haigh, Richard (2006) Higher capability maturity dynamics of UK construction organisations. In: 6th International Postgraduate Research Conference in the Built and Human Environment, 6-7th April 2006, Delft University of Technology and TNO, Delft University, Netherlands. (Unpublished)

Keraminiyage, Kaushal, Amaratunga, Dilanthi and Haigh, Richard (2006) ICT for construction process improvement: Enabler or a driver? In: Joint 2006 CIB W065/W055/W086 Symposium Proceedings, 20th October 2006, Rome, Italy. (Unpublished)

Keraminiyage, Kaushal, Amaratunga, Dilanthi and Haigh, Richard (2007) Identifying higher capability maturity KPAs of construction organisations; Model refinement through expert interviews. In: 7th International Postgraduate Conference in the Built and Human Environment, 28-29th March 2007, Salford Quays, UK.. (Unpublished)

Keraminiyage, Kaushal, Amaratunga, Dilanthi and Haigh, Richard (2005) Place of technology management as a key process area within construction process improvement: A critical analysis. In: RICS COBRA Conference (held as part of the QUT Research week), 3-8th July 2005, Queensland University of Technology, Brisbane, Australia. (Unpublished)

Keraminiyage, Kaushal, Amaratunga, Dilanthi and Haigh, Richard (2004) Process improvement in the UK construction industry and its co-relationship with the use of ICT Tools: current research status and the way forward. In: 2nd International CIB Student Chapter Symposium. Sustainability and Innovation in Construction and Real Estate, 2004, Tsinghua University, Beijing, China. (Unpublished)

Keraminiyage, Kaushal, Amaratunga, Dilanthi and Haigh, Richard (2007) Role of construction in managing disasters in developing economies. In: Annual Bank Conference on Development Economics, 17-18th May 2007, The World Bank, Bled, Slovenia. (Unpublished)

Keraminiyage, Kaushal, Amaratunga, Dilanthi and Haigh, Richard (2005) UK construction processes and IT adoptability: Learning form other industries. In: 11th Joint CIB International Symposium - Combining Forces., 13-16th June 2005, Helsinki, Finland. (Unpublished)

Keraminiyage, Kaushal, Amaratunga, Dilanthi and Haigh, Richard (2005) A capability maturity approach for construction process improvement: use of case studies approach. In: 5th International Postgraduate Conference in the Built and Human Environment, 2005, The Lowry, Salford Quays, UK. (Unpublished)

Keraminiyage, Kaushal, Amaratunga, Dilanthi and Haigh, Richard (2004) A literature review of knowledge management, facilities management and link between those two disciplines. In: 4th International Postgraduate Research Conference in the Built and Human Environment, 2004, University of Salford. (Unpublished)

Keraminiyage, Kaushal, Amaratunga, Dilanthi and Haigh, Richard (2003) A virtual environment for collaborative research and teaching in built environment. In: CIB W89 International Conference on Building Education and Research (BEAR), 9-11th April 2003, The Lowry, University of Salford. (Unpublished)

Keraminiyage, Kaushal, Amaratunga, Dilanthi, Haigh, Richard and Kaklauskas, A. (2008) Minimising content stagnation in construction education: Automating the content update through a shared web repository for distance construction education. In: ISARC 2008 - Proceedings from the 25th International Symposium on Automation and Robotics in Construction. ISARC. (Unpublished)

Keraminiyage, Kaushal, Amaratunga, Dilanthi, Haigh, Richard and Perera, S. (2005) Selection of electrical accessories: a cost modelling approach. In: 2nd Scottish Conference for the Post Graduate Researchers of the Built and Natural Environment, 16-17th November 2005, University of Glasgow, UK. (Unpublished)

Keraminiyage, Kaushal, Haigh, Richard and Amaratunga, Dilanthi (2006) Role of built environment education curricula in post- disaster recovery management. In: Proceedings of the Annual Research Conference of the Royal Institution of Chartered Surveyors. RICS. ISBN 9781842193074

Kermani, Majid, Farzaneh, Masoud and Kollar, László E. (2013) The Effects of Wind Induced Conductor Motion on Accreted Atmospheric Ice. IEEE Transactions on Power Delivery, 28 (2). pp. 540-548. ISSN 0885-8977

Khan, M.M., Ingleby, Michael and Ward, Robert D. (2006) Infrared Thermal Sensing of Positive and Negative Affective States. In: 2006 IEEE Conference on Robotics, Automation and Mechatronics. IEEE, pp. 1-6. ISBN 1-4244-0025-2

Khan, Yasir, Xu, Z.J. and Stigant, M. (2003) Virtual reality for neuropsychological diagnosis and rehabilitation: a survey. In: Seventh International Conference on Information Visualization, 2003. IV 2003. Proceedings. IEEE, pp. 158-163. ISBN 0-7695-1988-1

Khan, Yasir, Xu, Zhijie and Stigant, Mark (2003) Virtual reality for Neuropsychological diagnosis and rehabilitation: A Survey. In: Proceedings of the Seventh International Conference on Information Visualization. IEEE Computer Society, Washington DC, USA, pp. 158-163. ISBN ISBN:0-7695-1988-1

Khizer, Zara (2022) Novel Technological and Material Insights for Personalised Drug Delivery. Doctoral thesis, University of Huddersfield.

Kieckhoefer, H., Ingleby, Michael and Lucas, Gary (2006) Monitoring the physical formation of earprints: optical and pressure mapping evidence. Measurement, 39 (10). pp. 918-935. ISSN 0263-2241

Kilani, Asma (2018) Improving the efficiency of the Pre-Optimization Plan Techniques. Masters thesis, University of Huddersfield.

Kim, Dong Soo, Pang, Hee Suk, Lim, Jae Hyun, Yoon, Sung Yong and Lee, Hyunkook (2014) Methods and apparatuses for encoding and decoding object-based audio signals. US8756066.

Kim, Dong Soo, Pang, Hee Suk, Lim, Jae Hyun, Yoon, Sung Yong and Lee, Hyunkook (2014) Methods and apparatuses for encoding and decoding object-based audio signals. US8762157.

King, Stephen, Tian, G.Y. and Ward, Stephen (2004) A face-based computer login system. In: Advances in E-Engineering and Digital Enterprise Technology: Proceedings of the 4th International Conference on E-Engineering and Digital Enterprise. Wiley, pp. 532-534. ISBN 978-1-86058-467-1

King, Stephen, Tian, Gui Yun, Taylor, David and Ward, Stephen (2003) Cross-channel histogram equalisation for colour face recognition. In: Audio- and Video-Based Biometric Person Authentication. Lecture Notes in Computer Science, 2688 . Springer Berlin, Heidelberg, pp. 1055-1056. ISBN 978-3-540-40302-9

Kitchin, Diane E., McCluskey, T.L. and West, Margaret M. (2005) B vs OCL: comparing specification languages for Planning Domains. In: Proceedings of the Fifteenth International Conference on Automated Planning and Scheduling (ICAPS 2005). AAAI Press. ISBN 978-1-57735-220-4

Klontzas, Michael (2006) The BBC as mediator of public policy: reconsidering PSB in the digital era. In: Innovation and challenges in the European media. University Studio Press, Thessaloniki, Greece, pp. 107-131. ISBN 9601215716

Klontzas, Michael (2006) Digitalisation and the BBC: the net effect. In: The impact of the internet on the mass media in Europe. Abramis, Suffolk, England. ISBN 1845491459

Klontzas, Michael (2006) Digitalisation and the BBC: the net effect. In: COST A20 The impact of the internet on the mass media of Europe, 28th-29th April 2006, Delfi, Greece. (Unpublished)

Klontzas, Michael (2001) New radio technologies: rebirth and reproduction. In: The sound barrier: dynamics of Greek radio broadcasting. Papazisis, Athens, Greece, pp. 307-369. ISBN 960021266X

Klontzas, Michael (2004) The Prospects of New Radio Technologies. In: Broadcasting corporation and society. Yesterday - today - tomorrow, 18th - 19th June 2004, University of Athens, Astypalaia. (Unpublished)

Klontzas, Michael (2004) Public Service Broadcasting and the Delivery of Public Policy in Europe: Building Digital Britain and the BBC. In: New Directions in European Media, European Sociological Association Media Research Network, 5th - 7th November 2004, Aristotle University of Thessaloniki, Thessaloniki. (Unpublished)

Klontzas, Michael (1998) Stephen Lax, Beyond the Horizon – Communications Technologies: Past, Present and Future (Luton: John Libbey Media, 1997) ISBN 1860205143. Convergence: the international journal of research into new media technologies, 4 (3). pp. 106-109. ISSN 1354-8565

Klontzas, Michael (2008) iVision and the BBC: Building Public Value. Observatorio OBS, 2 (2). pp. 41-55. ISSN 1646-5954

Klontzas, Michael (2007) iVision and the BBC: building public value. In: COST 298 Conference The Good, the Bad and the Unexpected: The user and the future of information and communication technologies, 23rd-25th May 2007, Moscow, Russia. (Unpublished)

Klontzas, Michael and Sourbati, Maria (2006) Public Service Communications: Revisiting Some Age-Old Questions. In: MeCCSA/AMPE Conference 2006, 13th-15th January 2006, Leeds, UK. (Unpublished)

Knothe, K., Tan, S. L. and Bezin, Yann (2011) Book review : Contact mechanics and friction : Physical principles and applications : Wheel rail best practice handbook. Author V.L.Popov. ISBN 9783642108020. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 225 (3). pp. 341-344. ISSN 0954-4097

Kola, Susanna and Walsh, Jane C. (2006) Virtual Reality and Audiovisual Technology in the Management of Acute Pain – A review of the literature. In: 28th Annual Congress of Psychology Students in Ireland, 7th - 8th April 2006, NUI, Maynooth. (Unpublished)

Kola, Susanna and Walsh, Jane C. (2006) Virtual reality and audiovisual distraction in acute pain management. In: 3rd Annual Conference of the Division of Health Psychology, PSI, 3rd April 2006, NUI, Galway. (Unpublished)

Kola, Susanna, Walsh, Jane C., O'Gorman, Tom and Lee, John (2005) A randomised controlled trial of a distraction intervention to reduce anxiety in patients undergoing flexible sigmoidoscopy. In: 36th Annual Conference of the Psychological Society of Ireland, 17th-20th November 2005, Derry, Co. Londonderry. (Unpublished)

Kolatshi, Fatma Hussin M. (2017) Factors Affecting the Acceptance and Impact of Human Resource Information Systems (HRIS): Evidence from HR Professionals in Libyan Companies. Doctoral thesis, University of Huddersfield.

Kollar, László E. (1998) Backlash in machines stabilized by control force. In: 1st Conference on Mechanical Engineering, 1998, Budapest, Hungary. (Unpublished)

Kollar, László E. and Farzaneh, Masoud (2005) Dynamic analysis of overhead cable vibrations as a result of ice shedding. In: 6th International Symposium on Cable Dynamics, 2005, Charleston, South Carolina, USA. (Unpublished)

Kollar, László E. and Farzaneh, Masoud (2007) Dynamic model for spacers on triple and quad bundles of conductors. In: 7th International symposium on cable dynamics, 2007, Vienna, Austria. (Unpublished)

Kollar, László E. and Farzaneh, Masoud (2012) Influence of transmission line parameters on high-amplitude vibration of conductor bundles. In: 10th world congress on computational mechanics, 8-13th July 2012, Sao Paulo, Brazil. (Unpublished)

Kollar, László E. and Farzaneh, Masoud (2011) Numerical modeling and small-scale experimental simulation of ice shedding propagation on bundled conductors. In: IWAIS 2011 - The 14th International Workshop on Atmospheric Icing of Structures, 8-13th May 2011, Chongqing, China. (Unpublished)

Kollar, László E., Farzaneh, Masoud and Van Dyke, P. (2011) Modeling of cable vibration following ice shedding propagation. In: IWAIS 2011 - The 14th International Workshop on Atmospheric Icing of Structures, 8-13th May 2011, Chongqing, China. (Unpublished)

Kollar, László E., Lucas, Gary and Meng, Yiqing (2015) Reconstruction of velocity profiles in axisymmetric and asymmetric flows using an electromagnetic flow meter. Measurement Science and Technology, 26 (5). ISSN 0957-0233

Kollar, László E., Lucas, Gary and Zhang, Zhichao (2013) An Analytical Method for Reconstruction of Velocity Profiles using a Multi-Electrode Electromagnetic Flow Meter. In: 7th World Congress on Industrial Process Tomography. WCIPT7 . International Society for Industrial Process Tomography, Krakow, Poland, pp. 385-394. ISBN 978 0 853 16323 7

Kollar, László E., Lucas, Gary and Zhang, Zhichao (2014) Proposed method for reconstructing velocity profiles using a multi-electrode electromagnetic flow meter. Measurement Science and Technology, 25 (7). 075301. ISSN 0957-0233

Kollar, László E., Lucas, Gary and Zhang, Zhichao (2013) An analytical method for reconstruction of velocity profiles using a multi-electrode electromagnetic flow meter. In: 7th World Congress on Industrial Process Tomography, 2nd - 5th September 2013, Krakow, Poland. (Submitted)

Kollar, László E., Somlo, J. and Stépán, Gábor (2000) Periodic responses of a controlled balancing system. In: VIIIth international conference on the theory of machines and mechanisms, 5-7th September 2000, Technical University of Liberec, Czech republic. (Unpublished)

Kollar, László E. and Stepan, G. (2000) Balancing on inclined surface. In: 2nd Conference on Mechanical Engineering, 2000, Budapest, Hungary. (Unpublished)

Kollar, László E. and Stepan, G. (1999) Digital balancing using artificial labyrinth. In: Proceedings of the 5th Conference on Dynamical Systems - Theory and Applications. Technical University Press, pp. 221-225.

Kollar, László E., Stepan, Gabor and Hogan, S.J. (2000) Sampling Delay and Backlash in Balancing Systems. Periodica Polytechnica Mechanical Engineering, 44 (1). pp. 77-84. ISSN 0324-6051

Kollar, László E., Stepan, Gabor and Turi, Janos (2003) Dynamics of delayed piecewise linear systems. Electronic Journal of Differential Equations: Fifth Mississippi State Conference on Differential Equations and Computational Simulations, 10. pp. 163-185.

Kollar, László E., Stépán, Gábor and Turi, Janos (2004) Dynamics of sampled systems with backlash. In: 11th world congress in mechanism and machine science, 1-4th April 2004, Tianjin University, Tianjin, China. (Unpublished)

Kollar, László E. and Turi, Janos (2005) Numerical Stability Analysis in Respiratory Control System Models. Electronic Journal of Differential Equations: Proceedings of 2004 Conference on Differential Equations and Applications in Mathematical Biology, 12. pp. 65-78.

Koskela, Lauri (2011) Fifty years of irrelevance : the wild goose chase of management science. In: 19th Annual Conference of the International Group for Lean Construction 2011 (IGLC). Curran Associates, pp. 85-96. ISBN 9781622768233

Koskela, Lauri (2006) Foundations of concurrent engineering. In: Concurrent Engineering in Construction Projects. Routledge, pp. 12-29. ISBN 9780415394888

Koskela, Lauri (2002) How can construction research be organized? An overseas comment on the Fairclough Review. Buliding Research and Information, 30 (5). pp. 305-311. ISSN 0961-3218

Koskela, Lauri (2003) Is structural change the primary solution to the problems of construction? Buliding Research and Information, 31 (2). pp. 85-96. ISSN 0961-3218

Koskela, Lauri (2004) Making-Do — the Eighth Category of Waste. In: 12th Annual Conference of the International Group for Lean Construction, 3-5th August 2004, Helsingor, Denmark. (Unpublished)

Koskela, Lauri (1999) Management of Production in Construction: A Theoretical View. In: 7th Annual Conference of the International Group for Lean Construction, 26-28th July 1999, Berkeley, California, USA.. (Unpublished)

Koskela, Lauri (2004) Moving on - beyond lean thinking. Lean Construction journal, 1 (1). pp. 24-37. ISSN 1555-1369

Koskela, Lauri (2001) On New Footnotes to Shingo. In: 9th International Group for Lean Construction Conference, August 2001, National University of Singapore.. (Unpublished)

Koskela, Lauri (2010) On the theory of production in economics and production management. In: Modern Construction Economics. Routledge, pp. 80-99. ISBN 978-0415397063

Koskela, Lauri (1992) Process improvement and automation in construction: Opposing or complementing approaches? In: 9th International Symposium on Automation and Robotics in Construction, 3-5th June 1992, Tokyo, Japan. (Unpublished)

Koskela, Lauri (1997) Re-Engineering, concurrent engineering, lean production: What is the ideal antidote for the construction industry's ailments? In: International Conference on Construction Process Re-engineering, 14-15th July 1997, Gold Coast, Australia. (Unpublished)

Koskela, Lauri and Ballard, Glenn (2006) Should project management be based on theories of economics or production? Buliding Research and Information, 34 (2). pp. 154-163. ISSN 0961-3218

Koskela, Lauri, Howell, G. and Lichtig, W. (2006) Contracts and production. In: CIB W92 Symposium on Sustainability and Value through Construction Procurement, 29th November - 2nd December 2006, Digital World Centre, Salford Quays.. (Unpublished)

Koskela, Lauri and Howell, Greg (2001) Reforming Project Management: The Role of Planning, Execution and Controlling. In: 9th International Group for Lean Construction Conference, August 2001, National University of Singapore.. (Unpublished)

Koskela, Lauri and Howell, Gregory (2002) The underlying theory of project management is obsolete. In: Proceedings of PMI Research Conference 2002: Frontiers of Project Management Research and Application. Project Management Institute, pp. 293-302. ISBN 978-1880410998 (Unpublished)

Koskela, Lauri and Kagioglou, Mike (2006) On the Metaphysics of Management. In: Proceedings IGLC-14, July 2006, Santiago, Chile. IGLC, pp. 1-13.

Koskela, Lauri and Kagioglou, Mike (2005) On the Metaphysics of Production. In: 13th Annual Conference of the International Group for Lean Construction, 19-21st July 2005, Sydney, Australia. (Unpublished)

Koskela, Lauri and Rooke, John (2009) What Triggers Management Innovation? In: 17th Annual Conference of the International Group for Lean Construction IGLC 17, 15-17th July 2009, Taipei, Taiwan. (Unpublished)

Koskela, Lauri, Rooke, John and Siriwardena, Mohan (2009) Position paper on theory in through life management. In: International built and Human Environment Research Week (IRW) 2009: International Research Symposium, 27-28th January 2009, The Lowry, Salford Quays, Greater Manchester, UK.. (Unpublished)

Koskela, Lauri, Siriwardena, Mohan and Rooke, John (2008) Through-Life Management of Built Facilities: Towards a Framework for Analysis. In: 16th Annual Conference of the International Group for Lean Construction (IGLC-16), 16-18th July 2008, Manchester. (Unpublished)

Koskela, Lauri and Vrijhoef, Ruben (2000) The Prevalent Theory of Construction a Hindrance for Innovation. In: 8th Annual Conference of the International Group for Lean Construction, 17-19th July 2000, Brighton. (Unpublished)

Koutinas, Apostolis A., Malbranque, Fabien, Wang, Ruohang, Campbell, Grant M. and Webb, Colin (2007) Development of an Oat-Based Biorefinery for the Production ofl(+)-Lactic Acid byRhizopus oryzaeand Various Value-Added Coproducts. Journal of Agricultural and Food Chemistry, 55 (5). pp. 1755-1761. ISSN 0021-8561

Koutinas, Apostolis A., Wang, R., Campbell, Grant M. and Webb, C. (2005) Developing viable biorefineries for the production of biodegradable microbial plastics and various added-value products. In: 7th World Congress of Chemical Engineering Proceedings. World Congress of Chemical Engineering. ISBN 0852954948

Koutinas, Apostolis A., Wang, Rouhang, Campbell, Grant M. and Webb, Colin (2006) A Whole Crop Biorefinery System: A Closed System for the Manufacture of Non-food Products from Cereals. In: Biorefineries-Industrial Processes and Products. Wiley, pp. 165-191. ISBN 9783527619849

Kramer, Virginia (2016) Design and development of an innovative controller for small wind turbines. Masters thesis, University of Huddersfield.

Kroll, Ehud and Koskela, Lauri (2014) On the problem of abduction in design. In: Sixth International Conference on Design Computing and Cognition DCC'14, 23-25th June 2014, University College London. (Unpublished)

Kulatunga, Udayangani, Amaratunga, Dilanthi and Haigh, Richard (2008) Performance measurement in construction research & development: The use of case study research approach. In: CIB International Conference on Building Education and Research, 11th – 15th February 2008, Heritance Kandalama, Sri Lanka.

Kulatunga, K. J., Amaratunga, Dilanthi and Haigh, Richard (2008) Researching "Construction client and innovation": Pilot study and analysis. In: CIB W89 International Conference on Building Education and research (BEAR), 11-15th February 2008, Sri Lanka. (Unpublished)

Kulatunga, K. J., Amaratunga, Dilanthi and Haigh, Richard (2007) Researching construction client and innovation: methodological perspective. In: 7th International Postgraduate Conference in the Built and Human Environment, 28-29th March 2007, Salford Quays, UK. (Unpublished)

Kulatunga, K. J., Kulatunga, Udayangani, Amaratunga, Dilanthi and Haigh, Richard (2011) Client's championing characteristics that promote construction innovation. Construction Innovation: Information, Process, Management, 11 (4). pp. 380-398. ISSN 1471-4175

Kulatunga, Udayangani, Amaratunga, Dilanthi and Haigh, Richard (2006) Construction innovation: a literature review on current research. In: Conference in the Built and Human Environment, 2006, Delft University of Technology and TNO, Delft University, Netherlands,. (Unpublished)

Kulatunga, Udayangani, Amaratunga, Dilanthi and Haigh, Richard (2006) Design parameters of research and development performance measurement in construction. In: Joint 2006 CIB W065/W055/W086 Symposium Proceedings, 20th October 2006, Rome, Italy. (Unpublished)

Kulatunga, Udayangani, Amaratunga, Dilanthi and Haigh, Richard (2010) Implementation of critical success factors in construction research and development process. International Journal of Engineering, Science and Technology, 2 (9). pp. 94-106. ISSN 2141-2820

Kulatunga, Udayangani, Amaratunga, Dilanthi and Haigh, Richard (2005) Literature review on the status of research and development in construction and its performance measurement. In: 2nd Scottish Conference for the Post Graduate Researchers of the Built and Natural Environment, 16-17th November 2005, University of Glasgow. (Unpublished)

Kulatunga, Udayangani, Amaratunga, Dilanthi and Haigh, Richard (2006) Measuring performance and the impact of research and development in the construction industry: Research methodological perspectives. In: 6th International Postgraduate Research Conference in the Built and Human Environment, 6-7th April 2006, Delft University of Technology and TNO, Delft University, Netherlands. (Unpublished)

Kulatunga, Udayangani, Amaratunga, Dilanthi and Haigh, Richard (2005) Performance measurement applications within the UK construction industry: A literature review. In: 5th International Postgraduate Conference in the Built and Human Environment, 2005, The Lowry, Salford Quays, UK.. (Unpublished)

Kulatunga, Udayangani, Amaratunga, Dilanthi and Haigh, Richard (2007) Performance measurement in construction research \& development: The use of case study research approach. In: CIB W89 International Conference on Building Education and research (BEAR), 2007, Sri Lanka. (Unpublished)

Kulatunga, Udayangani, Amaratunga, Dilanthi and Haigh, Richard (2006) Performance measurement of construction research and development: Evaluation of performance measurement frameworks. In: Annual International Research Conference of the Royal Institution of Chartered Surveyors (RICS COBRA 2006), 7-8th September 2006, The RICS and The Bartlett School, University College London. (Unpublished)

Kulatunga, Udayangani, Amaratunga, Dilanthi and Haigh, Richard (2006) Role of the construction client in innovation: A literature review. In: Annual International Research Conference of the Royal Institution of Chartered Surveyors (RICS COBRA 2006), 7-8th September 2006, The RICS and The Bartlett School, University College London. (Unpublished)

Kulatunga, Udayangani, Amaratunga, Dilanthi and Haigh, Richard (2011) Structured approach to measure performance in construction research and development: performance measurement system development. International Journal of Productivity and Performance Management, 60 (3). ISSN 1741-0401

Kulatunga, Udayangani, Amaratunga, Dilanthi and Haigh, Richard (2006) The role of research and development in achieving excellence in construction. In: CIB W89 International Conference on Building Education and Research (BEAR), 12th April 2006, The Hong Kong Polytechnic University, Hong Kong.. (Unpublished)

Kulatunga, Udayangani, Amaratunga, Dilanthi and Haigh, Richard (2006) The role of research and development in shaping the future of quantity surveyors. In: Customising the Quantity Surveying Education to Face Challenges in Year 2020 Conference, 2006, Colombo, Sri Lanka. (Unpublished)

Kulatunga, Udayangani, Amaratunga, Dilanthi, Haigh, Richard and Baldry, D. (2005) Performance measurement applications in facilities management: An investigation into the future directions. In: 11th Joint CIB International Symposium - Combining Forces., 13-16th June 2005 2005, Helsinki, Finland.. (Unpublished)

Kulatunga, Udayangani, Amaratunga, Dilanthi, Haigh, Richard and Rameezdeen, Raufdeen (2006) Attitudes and perceptions of construction workforce on construction waste in Sri Lanka. Management of Environmental Quality: An International Journal, 17 (1). pp. 57-72. ISSN 1477-7835

Kulatunga, Udayangani, Wedawatta, Gayan, Amaratunga, Dilanthi and Shamsuzzoha, Md (2013) Disaster Risk and Community Vulnerability: the Case of Patuakhali, Bangladesh. In: 9th annual international conference of the international institute for infrastructure renewal and reconstruction, 7-10th July 2013, University of Queensland Australia (Brisbane). (Unpublished)

Kumar, Prashant, Martin, Haydn, Maxwell, G. and Jiang, Xiang (2013) Design of a dispersive lateral scanning surface profilometer. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 159-164. ISBN 9781862181212

Kumarapandian, Shamganth (2021) Threshold-Based Relay Selection for Cooperative Wireless Network. Doctoral thesis, University of Huddersfield.

Kureshi, Ibad (2010) Establishing a University Grid for HPC Applications. Masters thesis, University of Huddersfield.

Kureshi, Ibad (2016) An Intelligent Robust Mouldable Scheduler for HPC & Elastic Environments. Doctoral thesis, University of Huddersfield.

Kwong, K.H., Wu, T.T., Goh, H.G., Sasloglou, K., Stephen, B., Glover, Ian, Shen, C., Du, W., Michie, C. and Andonovic, I. (2011) Implementation of herd management systems with wireless sensor networks. IET Wireless Sensor Systems, 1 (2). pp. 55-65. ISSN 2043-6386

Kwong, K.H., Wu, T.T., Goh, H.G., Sasloglou, K., Stephen, B., Glover, Ian, Shen, C., Du, W., Michie, C. and Andonovic, I. (2009) Implementation of herd management systems with wireless sensor networks. In: Joint International Agricultural Conference, 6-8th July 2009, Wageningen, Netherlands. (Unpublished)

Kwong, Kae Hsiang, Sasloglou, Konstantinos, Goh, Hock Guan, Wu, Tsung Ta, Stephen, Bruce, Gilroy, Michael, Tachtatzis, Christos, Glover, Ian, Michie, Craig and Andonovic, Ivan (2009) Adaptation of wireless sensor network for farming industries. In: 2009 Sixth International Conference on Networked Sensing Systems (INSS). IEEE, pp. 1-4. ISBN 9781424463138

Kwong, Kae Hsiang, Wu, Tsung-Ta, Goh, Hock Guan, Sasloglou, Konstantinos, Stephen, Bruce, Glover, Ian, Shen, Chong, Du, Wencai, Michie, Craig and Andonovic, Ivan (2012) Practical considerations for wireless sensor networks in cattle monitoring applications. Computers and Electronics in Agriculture, 81. pp. 33-44. ISSN 0168-1699

Lan, Xiangqi (2014) The Development of a Flexible Characterisation System for Surface Metrology. Doctoral thesis, University of Huddersfield.

Lan, Xiangqi, Blunt, Liam and Xiao, Shaojun (2010) Building a Flexible Surface Characterisation System Architecture. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 43-47. ISBN 9781862180932

Lan, Xiangqi, Jiang, Xiang, Blunt, Liam and Xiao, Shaojun (2009) An adaptive system framework for surface characterisation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 142-146. ISBN 9781862180857

Lan, Xiangqi, Jiang, Xiang, Blunt, Liam, Xiao, Shaojun and Xie, Fang (2009) Characterisation Platform For Surface Metrology. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Lane, Mark (2021) THE USE OF EFFICIENCY INDICATORS FOR THE DETECTION OF COMBINED MOTOR ASYMMETRY FAULTS AND THEIR EFFECTIVENESS WHEN USED ON INVERTER DRIVEN MOTOR SYSTEMS. Doctoral thesis, University of Huddersfield.

Lane, Mark, Shaeboub, Abdulkarim, Gu, Fengshou and Ball, Andrew (2016) Investigation of Reductions in Motor Efficiency caused by Stator Faults when operated from an Inverter Drive. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328

Langdell, S.J. and Mason, J.C. (2000) Classifying spinal measurements using radial basis function network. In: Artificial neural networks in biomedicine. Perspectives in Neural Computing . Springer Verlag, pp. 93-104. ISBN 9781-852330057

Laveyne, Joannes I., Deckmyn, Christof, Moradzadeh, Mohammad, Vandevelde, Lieven and Van Eetvelde, Greet (2013) Development of a cloud-based renewable energy monitoring platform. In: 2013 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC). IEEE.

Leach, R.K., Giusca, C.L., Haitjema, H., Evans, C. and Jiang, Xiang (2015) Calibration and verification of areal surface texture measuring instruments. CIRP Annals - Manufacturing Technology, 64 (2). pp. 797-813. ISSN 0007-8506

Lee, Hyunkook, Dong Soo, Kim, Sung Yong, Yoon and Jae Hyun, Lim (2012) Method and an apparatus for processing a signal. US8258849.

Lee, Hyunkook, Sung Yong, Yoon, Dong Soo, Kim and Jae Hyun, Lim (2013) Method and an apparatus for processing a signal. US8346379.

Lee, Hyunkook, Sung Yong, Yoon, Dong Soo, Kim and Jae Hyun, Lim (2012) Method and an apparatus for processing a signal. US8135585.

Lee, A., Kagioglou, Mike, Cooper, Rachel and Aouad, Ghassan (2000) Production Management: The Process Protocol Approach. Journal of Construction Procurement, 6 (2). pp. 164-183. ISSN 1358-9180

Lee, Hyunkook (2014) 2D to 3D Upmixing based on Perceptual Band Allocation (PBA). In: AES 136th Convention. AES, p. 9079.

Lee, Hyunkook (2013) Apparent Source Width and Listener Envelopment in Relation to Source-Listener Distance. In: AES 52nd International Conference - Sound Field Control, 2nd-4th September 2013, Guildford, UK.

Lee, Hyunkook (2016) Capturing and Rendering 360º VR Audio Using Cardioid Microphones. In: AES Conference on Audio for Augmented and Virtual Reality, 30 Sep - 1 Oct 2016, Los Angeles, USA.

Lee, Hyunkook (2006) Effects of Interchannel Crosstalk in Multichannel Microphone Technique. Doctoral thesis, Institute of Sound Recording, University of Surrey.

Lee, Hyunkook (2015) Evaluation of the Phantom Image Effect for Phantom Images. In: 3rd International Conference on Spatial Audio (ICSA), 18-20 Sep 2015, Graz, Austria.

Lee, Hyunkook (2015) Investigation on the Phantom Image Elevation Effect. In: 139th Audio Engineering Society Convention, 29th October - 1st November 2015, New York City.

Lee, Hyunkook (2011) A New Multichannel Microphone Technique for Effective Perspective Control. In: 130th Audio Engineering Society AES Convention, 13-16 May 2011, London, UK.

Lee, Hyunkook (2016) Perceptual Band Allocation (PBA) for the Rendering of Vertical Image Spread with a Vertical 2D Loudspeaker Array. Journal of the Audio Engineering Society, 64 (12). pp. 1003-1013. ISSN 1549-4950

Lee, Hyunkook (2015) Perceptual Band Allocation (PBA) for the rendering of vertical image spread. In: 138th Annual Audio Engineering Society AES Convention, 7th-10th May 2015, Warsaw, Poland. (Unpublished)

Lee, Hyunkook (2016) Perceptual Signal Processing for 3D Sound Recording. In: Audio Engineering Society 140th International Convention, 4th - 7th June 2016, Paris, France.

Lee, Hyunkook (2016) Perceptually Motivated 3D Diffuse Field Upmixing. In: 2016 AES International Conference on Sound Field Control, 18th - 20th July 2016, Guildford, UK.

Lee, Hyunkook (2017) Perceptually Motivated Amplitude Panning (PMAP) for Accurate Phantom Image Localization. In: AES 142nd International Conference, 20th-23rd May 2017, Berlin, DE.

Lee, Hyunkook (2016) Phantom Image Elevation Explained. In: Audio Engineering Society the 141st International Convention, 29 Sep - 2 Oct, Los Angeles, USA.

Lee, Hyunkook (2011) The Relationship between Interchannel Time and Level Differences in Vertical Localisation and Masking. In: 131st Audio Engineering Society Convention.

Lee, Hyunkook (2017) Sound Source and Loudspeaker Base Angle Dependency of the Phantom Image Elevation Effect. Journal of the Audio Engineering Society, 65 (9). pp. 733-748. ISSN 1549-4950

Lee, Hyunkook (2012) Subjective Evaluations of Perspective Control Microphone Array (PCMA). In: 132nd Audio Engineering Society Convention, 26-29 April 2012, Budapest, Hungary.

Lee, Hyunkook (2016) Towards the development of intelligent microphone array designer. In: The 2nd AES Workshop on Intelligent Music Production, 13th September 2016, Willoughby Lecture Theatre, Charterhouse Square, EC1M 6BQ Charterhouse Square London.

Lee, Hyunkook (2010) A new time and intensity trade-off function for localisation of natural sound sources. In: Audio Engineering Society 128th Convention, 22-25 May 2010, London, UK. (Unpublished)

Lee, Hyunkook and Gribben, Christopher (2014) Effect of Vertical Microphone Layer Spacing for a 3D Microphone Array. Journal of the Audio Engineering Society, 62 (12). pp. 870-884. ISSN 15494950

Lee, Hyunkook and Gribben, Christopher (2013) On the optimum microphone array configuration for height channels. In: Audio Engineering Society134th International AES Convention, 4-7 May 2013, Rome, Italy.

Lee, Hyunkook, Gribben, Christopher and Wallis, Rory (2014) Psychoacoustic Considerations in Surround Sound with Height. In: 28th Tonmeistertagung: tmt 28, 20th-23rd November 2014, Cologne, Germany.

Lee, Hyunkook, Johnson, Dale and Mironovs, Maksims (2017) An Interactive and Intelligent Tool for Microphone Array Design. In: Audio Engineering Society 143rd international convention, 18-21st October 2017, New York.

Lee, Hyunkook, Johnson, Dale and Mironovs, Maksims (2016) A New Response Method for Auditory Localization and Spread Tests. In: Audio Engineering Society 140th International Convention, 4th - 7th June 2016, Paris, France.

Lee, Hyunkook, Kim, Dong Soo, Yoon, Sung Yong, Pang, Hee Suk and Lim, Jae Hyun (2016) Method and apparatus for processing audio signal using spectral data of audio signal. US 9275648 B2.

Lee, Hyunkook, Kim, Dongsoo, Yoon, Sungyong, Pang, Heesuk and Lim, Jaehyun (2010) An apparatus for processing an audio signal and method thereof. WO 2010/036061.

Lee, Hyunkook, Kim, Dongsoo, Yoon, Sungyong, Pang, Heesuk and Lim, Jaehyun (2009) A method and an apparatus for processing an audio signal. WO 2009/078681.

Lee, Hyunkook, Mason, Russell and Rumsey, Francis (2007) Perceptually modelled effects of interchannel crosstalk in multichannel microphone technique. In: Audio Engineering Society 123rd Convention, 5-8 Oct 2007, New York, USA.

Lee, Hyunkook and Millns, Connor (2017) Microphone Array Impulse Response (MAIR) Library for Spatial Audio Research. In: Audio Engineering Society 143rd international convention, 18-21st October 2017, New York.

Lee, Hyunkook and Rumsey, Francis (2004) Elicitation and Grading of Subjective Attributes of 2-channel Phantom Images. In: Audio Engineering Society 116th Convention, 8-11 May 2004, Berlin, Germany.

Lee, Hyunkook and Rumsey, Francis (2005) Investigation into the Effect of Interchannel Crosstalk in Multichannel Microphone Technique. In: Audio Engineering Society 118th Convention, 28-31 May 2005, Barcelona, Spain.

Lee, Hyunkook and Rumsey, Francis (2013) Level and Time Panning of Phantom Images for Musical Sources. Journal of the Audio Engineering Society, 61 (12). pp. 978-988. ISSN 15494950

Lee, Hyunkook, Sung Yong, Yoon, Dong Soo, Kim and Jae Hyun, Lim (2013) Method and and apparatus for processing a signal. US8346380.

Lee, Hyunkook, Yoon, Sungyong, Kim, Dongsoo and Lim, Jaehyun (2010) A method and an apparatus for processing a signal. WO 2010/036059.

Lee, Samuel, Barrans, Simon, Jupp, Martyn and Nickson, Ambrose (2017) The Impact of Volute Aspect Ratio on the Performance of a Mixed Flow Turbine. Aerospace, 4 (4). p. 56. ISSN 2226-4310

Lee, Samuel P. (2018) MIXED FLOW TURBINE HOUSING DEVELOPMENT FOR A FIXED GEOMETRY TURBOCHARGER APPLICATION. Doctoral thesis, University of Huddersfield.

Lee, William, Kaar, S. and O'Brien, S. B. G. (2018) Sinking Bubbles in Stout Beers. American Journal of Physics, 86 (4). ISSN 0002-9505

Leeungculsatien, Teerachai (2009) Novel Multi-Electrode Electromagnetic Flow Meter. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Leeungculsatien, Teerachai, Lucas, Gary and Zhao, Xin (2009) A numerical approach to determine the magnetic field distribution of an electromagnetic flow meter. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 147-152. ISBN 9781862180857

Leeuw, Hans (2019) Designing expressive engagement with electronic and hyper instruments.The Electrumpet a case study. Doctoral thesis, University of Huddersfield.

Legard, Phillip (2014) LOAM: Towards the Development of a Platform for Locative Audio & Oral History. Masters thesis, University of Huddersfield.

Lei, Dongdong, Crampton, Andrew, Mason, John C. and Ross, C. (2003) An efficient algorithm for solving linearized SVM regression problems. In: Curve and Surface Fitting: Saint-Malo 2002. Nashboro Press, Brentwood, pp. 249-258. ISBN 0-9728482-1-5

Lei, Dongdong and Mason, J.C. (2004) A hybrid method for ℓ1 approximation. In: Advanced Mathematical & Computational Tools In Metrology Vi. Series on Advances in Mathematics for Applied Sciences, 66 . World Scientific, pp. 314-317. ISBN 978-981-238-904-6

Lei, Dongdong and Mason, John C. (2004) Minimax approximation from a least squares solution. Optimization Methods and Software, 19 (3-4). pp. 351-359. ISSN 1055-6788

Leonard, Sinead, Walsh, Jane C. and Kola, Susanna (2010) The impact of a web-based educational intervention using positive message framing to promote the acceptability of the human papilloma virus (HPV) vaccine in a female university sample. In: 7th Annual Conference of the Division of Health Psychology, PSI: Psychology, Health and Medicine, 15th – 17th September 2010, Queen's University, Belfast. (Unpublished)

Leung, Andrew Y.T. and Guo, Zhongjin (2011) Forward residue harmonic balance for autonomous and non-autonomous systems with fractional derivative damping. Communications in Nonlinear Science and Numerical Simulation, 16 (4). pp. 2169-2183. ISSN 1007-5704

Lewis, Chara, Mojsiewicz, Kristin and Pettican, Anneké (2008) Skyscraping. [Show/Exhibition]

Lewis, Robert A., Hufton, Alan P., Hall, Christopher J., Helsby, W.I., Towns-Andrews, Elizabeth, Slawson, Susan and Boggis, C. R. M. (1999) Improvements in image quality and radiation dose in breast imaging. Synchrotron Radiation News, 12 (1). pp. 7-14. ISSN 0894-0886

Lewis, Robert A., Rogers, K. D., Hall, Christopher J., Towns-Andrews, Elizabeth, Slawson, S., Evans, Andrew, Pinder, S. E., Ellis, I. O., Boggis, C. R. M., Hufton, Alan P. and Dance, D. R. (2000) Breast cancer diagnosis using scattered X-rays. Journal of Synchrotron Radiation, 7 (5). pp. 348-352. ISSN 0909-0495

Lewis, Robert A., Rogers, Keith D., Hall, Christopher J., Towns-Andrews, Elizabeth, Slawson, Susan, Evans, Andrew, Pinder, Sarah E., Ellis, Ian O., Boggis, Caroline R. M., Hufton, Alan P. and Dance, David R. (1999) Preliminary observations of breast tumor collagen using synchrotron radiation. Proceedings of the Society of Photo-Optical Instrument Engineers (SPIE), 3770. pp. 32-37. ISSN 0277-786X

Li, Andol X and Bonner, John V.H. (2009) Designing interfaces to visualise domestic communication patterns. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 88-92. ISBN 9781862180857

Li, Andol X and Bonner, John V.H. (2010) Improving prototype consistence for wizard-of-oz simulations and evaluations. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 136-141. ISBN 9781862180932

Li, Duo (2018) DEVELOPMENT AND APPLICATION OF ON-MACHINE SURFACE MEASUREMENT FOR ULTRA-PRECISION TURNING PROCESS. Doctoral thesis, University of Huddersfield.

Li, Feng (2014) Integrated tactile-optical coordinate measurement for the reverse engineering of complex geometry. Doctoral thesis, University of Huddersfield.

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2011) A fast and effective way to improve the merging accuracy of multi-view point cloud data. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield, UK, pp. 18-21. ISBN 978-1-86218-098-7

Li, Guoxing (2016) Investigation into the dynamic responses and tribological characteristics of cylinder liners in a IC engine with alternative fuels. Doctoral thesis, University of Huddersfield.

Li, Guoxing, Gu, Fengshou, Wang, Tie and Ball, Andrew (2013) The Potential Effects of Alternative Fuels on the Lubricating Condition of Compression-ignition Engines. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 233. ISBN 9781862181212

Li, Guoxing, Gu, Fengshou, Wang, Tie, You, Jianjun and Ball, Andrew (2017) Investigation into the Vibrational Responses of Cylinder Liners in an IC Engine Fueled with Biodiesel. Applied Sciences, 7 (7). p. 717. ISSN 2076-3417

Li, Guoxing, Gu, Fengshou, Wei, Nasha, Xu, Yuandong and Ball, Andrew (2016) A validated finite element model for predicting dynamic responses of cylinder liners in an IC engine*. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328

Li, H., Cheung, C.F., Lee, W.B., To, S and Jiang, Xiang (2005) Characterisation of surface roughness for ultra-precision freeform surfaces. Journal of Physics: conference series, Series. pp. 32-35. ISSN 1742-6596

Li, H., Jiang, Xiang and Li, Z. (2005) Combination of M-estimation and Gaussian filtering for characterizing 3D Engineering surfaces. Key Engineering Materials, 295-29. pp. 459-464. ISSN 1013-9826

Li, Haiyang (2021) Condition Monitoring and Fault Diagnosis of Induction Machine Rotor Systems based on Instantaneous Electrical Signals Analysis. Doctoral thesis, University of Huddersfield.

Li, Hao, Liu, Yu, Lu, Joan and Yao, Shaowen (2008) OLAP model system for reporting use. In: Proceedings of the 14th International Conference on Automation and Computing (ICAC 2008). IEEE. ISBN 9780955529320

Li, Hao, Lu, Gehao, Lu, Joan and Yao, Shaowen (2006) Semantic enhanced self-configuring grid framework. In: Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP 2006. CSREA Press, pp. 316-321. ISBN 1-60132-005-1

Li, Hao, Lu, Joan, Cai, Binjing and Yao, Shaowen (2008) Study on SOA-Orient WebGIS framework. In: Proceedings of the 14th International Conference on Automation and Computing. IEEE. ISBN 9780955529320

Li, Hao, Lu, Joan, Gong, Ning and Li, Dexian (2007) Investigation of XQuery mechanism in water supplying information system. In: Proceedings of the 13th International Conference on Automation and Computing (ICAC’07). Staffordshire University. ISBN 9780955529313

Li, Hao, Lu, Joan, Li, Dexian and Xue, Gang (2007) Mapping between BPMN and XPDL based on XML-binding. In: Proceedings of the 13th International Conference on Automation and Computing (ICAC’07). Staffordshire University. ISBN 9780955529313

Li, Hao, Lu, Joan and Lu, Gehao (2008) The study and actualization of key technologies in WebGIS based on XML. In: Proceedings of the 2008 International Conference on Internet Computing, ICOMP 2008. CSREA Press, pp. 310-315. ISBN 1601320736

Li, Hao, Zhong, Yong, Lu, Joan and Zhang, Xuejie (2008) A banking based grid recourse allocation scheduling. The 3rd International Conference on Grid and Pervasive Computing Workshops, 2008. GPC Workshops '08. pp. 239-244.

Li, Hua, Wang, Mi, Wu, Ying-Xiang and Lucas, Gary (2008) Volume flow rate measurement in vertical oil-in-water pipe flow using electrical impedance tomography and a local probe. In: 11th International Conference on multiphase flow in industrial plants, 7th-10th September 2008, Palermo, Sicily.

Li, Huifen, Jiang, Xiang and Li, Zhu (2004) Robust estimation in Gaussian filtering for engineering surface characterization. Precision Engineering, 28 (2). pp. 186-193. ISSN 0141-6359

Li, J., Campbell, Grant M. and Mujumdar, A. S. (2003) Discrete Modeling and Suggested Measurement of Heat Transfer in Gas–Solids Flows. Drying Technology, 21 (6). pp. 979-994. ISSN 0737-3937

Li, J., Webb, C., Pandiella, S.S. and Campbell, Grant M. (2003) Discrete particle motion on sieves—a numerical study using the DEM simulation. Powder Technology, 133 (1-3). pp. 190-202. ISSN 0032-5910

Li, J., Webb, C., Pandiella, S.S., Campbell, Grant M., Dyakowski, T., Cowell, A. and McGlinchey, D. (2005) Solids deposition in low-velocity slug flow pneumatic conveying. Chemical Engineering and Processing: Process Intensification, 44 (2). pp. 167-173. ISSN 0255-2701

Li, J., Webb, C., Pandiella, S.S., Campbell, Grant M., Parker, D. J. and Seville, J.P.K. (2003) Solids flow and seperation characteristics on an inclined flow chute with different flow surfaces. In: 1st International Symposium on Process Intensification and Miniaturisation, 18th - 21st August 2003, Newcastle, UK. (Unpublished)

Li, J., Webb, C., Pandiella, Severino S., Campbell, Grant M., Dyakowski, T., Cowell, A. and McGlinchey, D. (2003) Solids Deposition in Low Velocity Slug Flow Pneumatic Conveying Systems. In: 4th International Conference for Conveying and Handling of Particulate Solids, 27th - 30th May 2003, Budapest, Hungary. (Unpublished)

Li, Miaoshuo (2022) A Pixel Array Framework of Vision-based Remote Vibration Measurements for Modal Analysis and Condition Monitoring. Doctoral thesis, University of Huddersfield.

Li, Na, Zhao, Xiangmo, Li, Daxiang, Wang, Jing and Bai, Bendu (2015) Object Tracking with Multiple Instance Learning and Gaussian Mixture Model. Journal of Information and Computational Science, 12 (11). pp. 4465-4477. ISSN 1548-7741

Li, T., Blunt, Liam and Jiang, Xiang (2009) Uncertainty In Surface Roughness Measurement. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Li, T., Blunt, Liam, Jiang, Xiang, Scott, Paul J. and Xiao, X. (2007) On the accuracy of roughness parameters. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.

Li, T., Jiang, Xiang, Blunt, Liam, Scott, Paul J. and Xiao, Shaojun (2007) Comparison on F2 softgauges for surface texture. In: 1st European Conference on Tribology (ECOTRIB), June 12-15, 2007, Ljubljana, Slovenia.

Li, T., Leach, Richard K., Jung, L, Jiang, Xiang and Blunt, Liam (2009) Comparison of Type F2 Software Measurement Standards for Surface Texture. Technical Report. National Physical Laboratory, UK, London, UK.

Li, Tukun (2011) Softgauges for surface texture. Doctoral thesis, University of Huddersfield.

Li, W, Gu, Fengshou, Ball, Andrew, Leung, A Y T and Phipps, C E (2001) A study of the noise from diesel engines using the independent component analysis. Mechanical Systems and Signal Processing, 15 (6). pp. 1165-1184. ISSN 0888-3270

Li, W, Parkin, Robert M, Coy, Joanne and Gu, Fengshou (2002) Acoustic based condition monitoring of a diesel engine using self-organising map networks. Applied acoustics, 63 (7). pp. 699-711. ISSN 0003-682X

Li, Y., Tian, G.Y. and Ward, Stephen (2006) Numerical simulations on electromagnetic NDT at high speed. Insight - Non-Destructive Testing and Condition Monitoring, 48 (2). pp. 103-108. ISSN 1354-2575

Li, Y., Tian, Gui Yun and Cui, Z. (2006) Theoretical and experimental study on magnetically-actuated micromirrors for electromagnetic NDE. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Li, Yuhua, Gu, Fengshou, Harris, G., Ball, Andrew, Bennett, N and Travis, K (2005) The measurement of instantaneous angular speed. Mechanical Systems and Signal Processing, 19 (4). pp. 786-805. ISSN 0888-3270

Li, Yuhua, Gu, Fengshou, Harris, Georgina, Ball, Andrew, Bennett, Nick and Travis, Ken (2005) The measurement of instantaneous angular speed. Mechanical Systems and Signal Processing, 19 (4). pp. 786-805. ISSN 0888-3270

Li, Z. and Jiang, Xiang (2005) An international strategy for China's manufacturing industry and technical standards. In: International Manufacturing Leaders Forum (IMLF 2005), 28th Feb-2nd March 2005, Glenelg Beach, Adelaide, South Australia. (Unpublished)

Li, Zongqi, Lu, Joan, Li, Li and Yao, Shaowen (2007) An MASIF-based mobile agent mechanism to locate mobile agent in crossing regions. In: Proceedings of the 13th International Conference on Automation and Computing (ICAC’07). Staffordshire University. ISBN 9780955529313

Lidstone, Liam, Gu, Fengshou and Ball, Andrew (2007) An Experimental Study of NOx Emissions for the Development of an Emission Analysis Tool. In: SAE 2007 Fuels and emissions conference proceedings. SAE, Washington D C, U.S.A..

Limchimchol, Thitikorn, Griffin, James Marcus and Chen, Xun (2006) Multi-class classification of grinding chatter detection using support vector machines. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 217-222. ISBN 9780953389094

Lin, D., Jiang, Xiang, Zhang, W., Zhang, L. and Blunt, Liam (2005) Multiplexed fibre interferometer and its application on surface measurement. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Lin, Jinshan, Chen, Qian, Tian, Xiange and Gu, Fengshou (2012) Fault Diagnosis of Rolling Bearings using Multifractal Detrended Fluctuation Analysis and Mahalanobis Distance Criterion. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. IEEE, Loughborough, UK, pp. 1-6. ISBN 9781467317221

Lin, Pei-Hui, Hanea, Daniela, Ale, Ben, Sillem, Simone, Van Gulijk, Coen and Hudson, Patrick (2012) Integrating organisational factors into a BBN model of risk. In: 11th International Probabilistic Safety Assessment and Management Conference and the Annual European Safety and Reliability Conference 2012 (PSAM11 ESREL 2012). IAPSAM & ESRA, pp. 719-728. ISBN 9781622764365

Lin, Yu-Jiun, He, Peng, Tavakkoli, Mohammad, Mathew, Nevin Thunduvila, Fatt, Yap Yit, Chai, John, Goharzadeh, Afshin, Vargas, Francisco M. and Biswal, Sibani Lisa (2017) Characterizing Asphaltene Deposition in the Presence of Chemical Dispersants in Porous Media Micromodels. Energy & Fuels. ISSN 0887-0624

Lindhout, P., Van Gulijk, Coen and Ale, Ben (2011) Underestimation of language issues in frequently used accident investigation methods. Journal of Hazardous Materials, 191 (1-3). pp. 158-162. ISSN 0304-3894

Lindsay, Ann, Downs, Denise and Lunn, Ken (2003) Business processes—attempts to find a definition. Information and Software Technology, 45 (15). pp. 1015-1019. ISSN 0950-5849

Liskiewicz, T.W., Kubiak, Krzysztof and Comyn, T. (2016) Nano-indentation mapping of fretting-induced surface layers. Tribology International. ISSN 0301-679X

Little, David, Hall, David, Rhymer, S. and Lee, H. L. (2000) The development of a late configuration tool and procedural ethos within SMEs. In: Advances in Manufacturing Technology. Wiley, London, UK, pp. 203-207. ISBN 978-1-86058-267-7

Little, David and McKinna, A. (2005) A lean manufacturing assessment tool for use in SMEs. In: Proceedings of the Seventh SMESME International Conference : Stimulating Manufacturing Excellence in Small & Medium Enterprises: 12-15 June 2005 University of Strathclyde, Glasgow, UK. University of Strathclyde, Scottish School of Further Education. ISBN 0947649379

Little, David, Peck, Matthew, Rollins, Ralph and Porter, Keith (2000) Business drivers not sector membership determine the most effective production planning and control; a novel approach to a perennial problem. Production Planning & Control, 11 (7). pp. 721-729. ISSN 09537287

Little, David, Rollins, Ralph, Peck, Matthew and Porter, Keith (2000) Integrated planning and scheduling in the engineer-to-order sector. International Journal of Computer Integrated Manufacturing, 13 (6). pp. 545-554. ISSN 0951192X

Liu, Baolong (2010) XML Security in XML Data Integrity, Authentication, and Confidentiality. Doctoral thesis, University of Huddersfield.

Liu, De Zheng, Xu, Qiang, Lu, Zhongyu and Xu, Dong Lai (2012) Research in the development of computational FE software for creep damage mechanics. In: Proceedings of 18th International Conference on Automation and Computing (ICAC), 2012. IEEE. ISBN 978-1-4673-1722-1

Liu, De Zheng, Xu, Qiang, Lu, Zhongyu and Xu, Dong Lai (2012) The Review of Computational FE Software for Creep Damage Mechanics. Advanced Materials Research, 510. pp. 495-499. ISSN 1662-8985

Liu, De Zheng, Xu, Qiang, Lu, Zhongyu, Xu, Dong Lai and Tan, Feng (2013) The Validation of Computational FE Software for Creep Damage Mechanics. Advanced Materials Research, 744. pp. 205-210. ISSN 1662-8985

Liu, De Zheng, Xu, Qiang, Lu, Zhongyu, Xu, Dong Lai and Xu, Qi Hua (2013) The Techniques in Developing Finite Element Software for Creep Damage Analysis. Advanced Materials Research, 744. pp. 199-204. ISSN 1662-8985

Liu, Dezheng (2015) The development of finite element software for creep damage analysis. Doctoral thesis, University of Huddersfield.

Liu, Fulong, Gu, Fengshou, Zhao, Yunshi and Ball, Andrew (2016) A validation study of ACS-SSI for online condition monitoring of vehicle suspension systems. Vibroengineering Procedia, 10. pp. 369-375. ISSN 2345-0533

Liu, Lu, Russell, Duncan, Xu, Jie, Webster, David, Luo, Zongyang, Venters, Colin and Davies, John K. (2009) Modelling and simulation of Network Enabled Capability on service-oriented architecture. Simulation Modelling Practice and Theory, 17 (8). pp. 1430-1442. ISSN 1569-190X

Liu, Lu, Xu, Jie, Russell, Duncan, Davies, John K., Webster, David, Luo, Zongyang and Venters, Colin (2012) Dynamic service integration for reliable and sustainable capability provision. International Journal of Systems Science, 43 (1). pp. 79-96. ISSN 0020-7721

Liu, Na (2021) Exploring Public Acceptance of Connected and Autonomous Vehicles with a Focus on Cyber Security and Privacy Risks. Doctoral thesis, University of Huddersfield.

Liu, Qiang, Chen, Xun, Cobb, Sue and Eastgate, Richard (2006) Physical behaviours simulation and exact collision detection within VFDAS. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 33-37. ISBN 9780953389094

Liu, Qiang, Chen, Xun, Cobb, Sue and Eastgate, Richard (2005) Virtual reality application in fixture assembly and interactive simulation. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 183-188. ISBN 9780953389087

Liu, Qiang, Chen, Xun and Gindy, Nabil (2007) Evaluation of superalloy heavy-duty grinding based on multivariate tests. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221 (9). pp. 1421-1430. ISSN 0954-4054

Liu, Qiang, Chen, Xun, Wang, Yan and Gindy, Nabil (2008) Empirical modelling of grinding force based on multivariate analysis. Journal of Materials Processing Technology, 203 (1-3). pp. 420-430. ISSN 0924-0136

Liu, S, Gu, Fengshou and Ball, Andrew (2002) The on-line detection of engine misfire at low speed using multiple feature fusion with fuzzy pattern recognition. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 216 (5). pp. 391-402. ISSN 0954-4070

Liu, Weidong (2021) VERIFICATION OF X‐RAY COMPUTED TOMOGRAPHY FOR ADDITIVE MANUFACTURING DIMENSIONAL & SURFACE TEXTURE METROLOGY AND DEPLOYMENT TO INTERNAL GEOMETRY MEASUREMENT. Masters thesis, University of Huddersfield.

Liu, X.-W., Cheng, K., Longstaff, Andrew P., Widiyarto, H.M. and Ford, Derek G. (2004) Improved dynamic cutting force model in ball-end milling. Part I: theoretical modelling and experimental calibration. International Journal of Advanced Manufacturing Technology, 26 (5-6). pp. 457-465. ISSN 0268-3768

Liu, X.W., Cheng, K., Webb, D., Longstaff, Andrew P., Widiyarto, Muhammad Helmi Nur, Jiang, Xiang, Blunt, Liam and Ford, Derek G. (2003) Investigation of the cutting force coefficients in ball-end milling. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 45-54. ISBN 9781853129902

Liu, Y. and Chen, Xun (2004) A study on the abrasive water jet cutting for granite. Key Engineering Materials, 257-25. pp. 527-534. ISSN 1662-9795

Liu, Yue (2021) IN- SITU STRUCTURED LIGHT TECHNIQUES STUDY TO INSPECT SURFACES DURING ADDITIVE MANUFACTURE. Doctoral thesis, University of Huddersfield.

Liu, Zhenxing, Liu, Lu, Hardy, James, Anjum, Ashiq, Hill, Richard and Antonopoulos, Nick (2012) Dot-base62x: building a compact and user-friendly text representation scheme of ipv6 addresses for cloud computing. Journal of Cloud Computing: Advances, Systems and Applications, 1 (1). p. 3. ISSN 2192-113X

Lockwood, S., Haase, Frerk and Ford, Derek G. (2003) Active vibration control of machine tool structures - Part 1: DSP algorithms. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 441-450. ISBN 9781853129902

Long, Derek, Smith, Stephen F., Borrajo, Daniel and McCluskey, T.L. (2006) Proceedings of the Sixteenth International Conference on Automated Planning and Scheduling, ICAPS 2006. AAAI. ISBN 978-1-57735-270-9

Long, Hua (2013) Research routing and MAC based on LEACH and S-MAC for energy efficiency and QoS in wireless sensor network. Doctoral thesis, University of Huddersfield.

Long, Hua, Lu, Joan, Chao, S. and Yip, Yau Jim (2007) Handoff algorithm improvement and its analysis for mobile networks. In: Proceedings of the 2007 International Conference on Communications. CSREA Press, pp. 66-71. ISBN 1-60132-030-2

Longstaff, Andrew P., Fletcher, Simon and Ford, Derek G. (2004) Better accuracy speaks volumes: lost in space. Machinery. pp. 14-16.

Longstaff, Andrew P., Fletcher, Simon and Ford, Derek G. (2003) Practical experience of thermal testing with reference to ISO 230 Part 3. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 473-483. ISBN 9781853129902

Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2005) Volumetric error compensation through a Siemens controller. In: Proceedings of the 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. European Society for Precision Engineering and Nanotechnology, pp. 422-431. ISBN 1861941188

Longstaff, Andrew P., Postlethwaite, S. R. and Ford, Derek G. (2001) Assessment of the volumetric accuracy of a machine with geometric compensation. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 41-50. ISBN 9781853128905

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2010) A Fast Algorithm for Morphological Filters. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 190. ISBN 9781862180932

Louws, Margie (2015) Inter-organizational collaboration among health and social care: TRT©, a transactional approach. Working Paper. The University of Huddersfield. (Unpublished)

Lu, Wenlong (2012) Modelling the Integration between the Design and Inspection Process of Geometrical Specifications for Digital Manufacturing. Doctoral thesis, University of Huddersfield.

Lu, Gehao, Li, Hao, Lu, Joan and Yao, Shaowen (2006) Agent mediated SOA with XML framework for grid computing. In: Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP 2006. CSREA Press, pp. 347-351. ISBN 1-60132-005-1

Lu, Gehao, Lu, Joan, Yao, Shaowen and Yip, Yau Jim (2008) Investigation on FIPA agent communication mechanism based on web service. In: Proceedings of the 2008 International Conference on Internet Computing, ICOMP 2008. CSREA Press, pp. 316-320. ISBN 1601320736

Lu, Gehao, Lu, Joan, Yao, Shaowen and Yip, Yau Jim (2007) A comparative study in Java-based development platforms for multi-agent systems. In: Proceedings of the 2007 International Conference on Internet Computing, ICOMP 2007. CSREA Press, pp. 339-345. ISBN 1601320442

Lu, Gehao, Lu, Joan, Yao, Shaowen and Yip, Yau Jim (2007) A review on computational trust models for multi-agent systems. In: Proceedings of the 2007 International Conference on Internet Computing, ICOMP 2007. CSREA Press, pp. 325-331. ISBN 1601320442

Lu, Gehao, Lu, Joan and Yip, Yau Jim (2008) Mobile agent based data fusion for wireless sensor networks with a XML framework. In: Proceedings of the 2008 International Conference on Internet Computing, ICOMP 2008. CSREA Press, pp. 298-303. ISBN 1601320736

Lu, Joan (2002) Building XML applications in science and technology: XML schema for scientific databases. In: Proceedings of the IADIS International Conference WWW/Internet 2002, ICWI 2002, Lisbon, Portugal, November 13-15, 2002. IADIS, pp. 395-402. ISBN 9729027536

Lu, Joan (2003) Building XML applications in science and technology: XML in scientific graphic databases. In: International Conference on Internet Computing. CSREA Press, pp. 237-242. ISBN 1-932415-00-9

Lu, Joan (2012) Learning with Mobile Technologies, Handheld Devices, and Smart Phones: Innovative Methods. IGI Global, Hershey, PA , USA. ISBN 9781466609365

Lu, Joan (2007) Proceedings of the 2007 International Conference on Internet Computing, ICOMP 2007. CSREA Press, USA. ISBN 1-60132-044-2

Lu, Joan (2002) XML for scientific databases. In: XML World 2002, 23rd-25th September 2002, New Orleans. (Unpublished)

Lu, Joan (2005) A survey of XML applications on science and technology. International Journal of Software Engineering and Knowledge Engineering, 15 (1). pp. 1-33. ISSN 0218-1940

Lu, Joan and Cripps, Nathan (2004) Building XML applications in science and technology: an XML approach to authentication in scientific documents. In: Proceedings of the International Conference on Internet Computing, IC '04. CSREA Press, pp. 201-207. ISBN 1-932415-44-0

Lu, Joan and Cripps, Nathan (2008) Understanding XML security with a case study. In: Proceedings of the 2008 International Conference on Internet Computing, ICOMP 2008. CSREA Press, pp. 291-297. ISBN 1601320736

Lu, Joan, Cripps, Nathan and Hua, Chen (2006) XML security in certificate management. In: Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP 2006. CSREA Press, pp. 340-346. ISBN 1-60132-005-1

Lu, Joan, Cripps, Nathan, Hua, Chen and Yan, Cao (2005) An approach to XML key management specification in X-certification. In: Proceedings of The 2005 International Conference on Internet Computing, ICOMP 2005. CSREA Press, pp. 488-493. ISBN 1-932415-69-6

Lu, Joan and Fox, Rob (2007) Effectively storing and querying XML. In: Proceedings of the 2007 International Conference on Internet Computing, ICOMP 2007. CSREA Press, USA, pp. 311-317. ISBN 1-60132-044-2

Lu, Joan, Helliwell, Nathan and Jackson, Adrian R. (2003) Investigation into online assessment with XML technologies. In: International Conference on Internet Computing. CSREA Press, pp. 111-117. ISBN 1-932415-00-9

Lu, Joan and Rahman, Umair (2004) Intelligent search technology for extracting scientific data/documents on web. In: Proceedings of the International Conference on Internet Computing, IC '04. CSREA Press, pp. 220-226. ISBN 1-932415-44-0

Lu, Joan, Rahman, Umair and Chen, Hua (2005) An agent related intelligent search technology on the Web information retrieval system. In: Proceedings of the Ninth International Conference on Computer Supported Cooperative Work in Design, 2005. IEEE, pp. 458-463. ISBN 1-84600-002-5

Lu, Joan, Rahman, Umair and Yao, Shaowen (2005) An agent related implementation on the web information retrieval system. In: Third International Conference on Information Technology and Applications (ICITA 05). IEEE, pp. 215-220. ISBN 0-7695-2316-1

Lu, Joan and Riaz, M. (2004) Building a web-based coupling quotation system in mechanical engineering. In: Advances in E-Engineering and Digital Enterprise Technology: Proceedings of the 4th International Conference on E-Engineering and Digital Enterprise. Wiley, pp. 103-112. ISBN 978-1-86058-467-1

Lu, Joan, Riaz, Mumtaz, Wang, Xujing, Hua, Chen and Yan, Cao (2005) Building XML applications in science and technology: implementing XML-based methodology to viewing analysed medical data. In: Proceedings of The 2005 International Conference on Internet Computing, ICOMP 2005. CSREA Press, pp. 494-499. ISBN 1-932415-69-6

Lu, Joan and Weeks, Rob (2009) An Investigation in XML Based Scientific Data Visualization. In: ICOMP'09 International Conference of Internet Computing, 13th - 16th July 2009, Las Vegas, Nevada, USA. (Unpublished)

Lu, R.S. and Tian, Gui Yun (2006) On-line measurement of surface roughness by laser light scattering. Measurement Science and Technology, 17. pp. 1496-1502. ISSN 0957-0233

Lucas, Gary (2008) Measurement of the local properties of multiphase flows. In: 3rd International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics (ISEM2008), 7-10 December 2008, Tainan, Taiwan.