Zeng, Shengye, Blunt, Liam, Jiang, Xiang and Bills, Paul J. (2010) Investigation of the material removal characteristic for polishing CoCr alloy. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 177-182. ISBN 9781862180932
Abstract

To investigate the material removal characteristic of paste polishing, experimental investigations based on Taguchi method have been carried out. In the experiments, the dwell time was fixed 300 seconds and the bonnet position was 4. The four variable factors (precess angles, head speed, head pressure and tool offset) with 3 levels were chosen to design the orthogonal array. With the designed orthogonal array, two
groups of experiments have been implemented to verify the repeatability of paste polishing. The
experimental results indicated that the sizes and shapes of polishing spot varied with polishing parameters, the most influential parameter was precess angle and its contribution was 37.39%. However, the results of material removal rates did not coincide with the principle of Preston equation. This meant that the paste polishing was not a deterministic polishing and cannot be used to correct the form polishing.

Information
Library
Documents
[img]
Preview
covers.pdf - Cover Image

Download (1MB) | Preview
[img]
Preview
Additpaper-16-S-Zeng.pdf - Published Version

Download (639kB) | Preview
Statistics

Downloads

Downloads per month over past year

Downloads per month over past year for
"covers.pdf"

Downloads per month over past year for
"Additpaper-16-S-Zeng.pdf"

Add to AnyAdd to TwitterAdd to FacebookAdd to LinkedinAdd to PinterestAdd to Email