Group by: Creators | Date | Item Type | Uncontrolled Keywords | No Grouping
Number of items at this level: 687.

Article

Abouelatta, O.B., El-Bediwi, A., Sakrana, A., Jiang, Xiang and Blunt, Liam (2006) Surface integrity of provisional resin materials. Measurement Science and Technology, 17 (3). pp. 584-591. ISSN 0957-0233

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter, Myers, Alan and Briggs, Jack (2009) A Low-cost Ultrasonic 3D Measurement Device for Calibration for Cartesian and Non-Cartesian Machines. Journal of the Japanese Society of Experimental Mechanics, 9 (S). pp. 77-80. ISSN 1346-4930

Anyakwo, Arthur, Pislaru, Crinela and Ball, Andrew (2012) A New Method for Modelling and Simulation of the Dynamic Behaviour of the Wheel-rail contact. International Journal of Automation and Computing, 9 (3). ISSN 1476-8186

Bai, Qingshun, Tong, Zhen, Liang, Yingchun, Chen, Jiaxuan and Wang, Zhiguo (2010) Simulation of scale dependency on tensile mechanical properties of single crystal copper nano-rod. Acta Metall Sin, 46 (10). pp. 1173-1180. ISSN 1006-7191

Barrans, Simon and Muller, Matthias (2009) Finite element prediction of the ultimate axial load capacity of V-section band clamps. Journal of Physics: conference series, 181. pp. 1-8. ISSN 1742-6596

Barrans, Simon and Weston, R.H (2006) Technical Application Series - A strain data aquisition system suitable for remote applications. Experimental Techniques, 28 (3). pp. 68-71. ISSN 0732-8818

Beaucamp, Anthony, Namba, Yoshiharu, Messelink, Wilhelmus, Walker, David D., Charlton, Phillip and Freeman, Richard (2014) Surface integrity of fluid jet polished tungsten carbide. Procedia CIRP, 13. pp. 377-381. ISSN 2212-8271

Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X

Bills, Paul J., Blunt, Liam and Jiang, Xiang (2007) Development of a technique for accurately determining clinical wear in explanted total hip replacements. Wear, 263 (7-12). pp. 1133-1137. ISSN 0043-1648

Bills, Paul J., Brown, L., Jiang, Xiang and Blunt, Liam (2005) A metrology solution for the orthopaedic industry. Journal of Physics, Series. pp. 316-319. ISSN 1742-6596

Bills, Paul J., Racasan, Radu, Tessier, P and Blunt, Liam (2015) Assessing the material loss of the modular taper interface in retrieved metal on metal hip replacements. Surface Topography: Metrology and Properties, 3 (2). 025002. ISSN 2051-672X

Blunt, Liam, Armstrong, J. and Blunt, R. (2005) The use of advanced 3D surface metrology for the characterisation of epi-wafers and Si structures. Physica Status Solidi (c), 2 (4). pp. 1251-1258. ISSN 1610-1634

Blunt, Liam, Bills, Paul J., Jiang, Xiang and Chakrabarty, G. (2008) Improvement in the assessment of wear of total knee replacements using coordinate-measuring machine techniques. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 222 (3). pp. 309-318. ISSN 0954-4119

Blunt, Liam, Bills, Paul J., Jiang, Xiang, Hardacker, Catherine and Chakrararty, Gautum (2009) The role of tribology and metrology in the latest development of bio-materials. Wear, 266 (3-4). pp. 424-431. ISSN 0043-1648

Blunt, Liam, Elrawemi, Mohamed, Fleming, Leigh and Sweeney, Francis (2013) Correlation of micro and nano–scale defects with WVTR for aluminium oxide barrier coatings for flexible photovoltaic modules. International Journal of Precision Technology, 3 (3). pp. 290-302. ISSN 1755-2060

Blunt, Liam, Jiang, Xiang, Leach, Richard K., Harris, Peter M. and Scott, Paul J. (2007) The development of user-friendly software measurement standards for surface topography software assessment. Wear, 264 (5-6). pp. 389-393. ISSN 0043-1648

Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2005) Advances in micro and nano-scale surface metrology. Key Engineering Materials, 295-29. pp. 431-436. ISSN 1013-9826

Blunt, Liam and Li, T. (2010) Evaluation of Measurement Uncertainty. Quality Manufacturing Today (March).

Blunt, Liam and Scott, Paul J. (2012) Characterisation of structured geometry surfaces features on micro and nano scale surfaces. International Journal of Nanomanufacturing, 8 (5/6). pp. 359-371. ISSN 1746-9392

Blunt, Liam and Stout, K.J. (2001) 8th International Conference on Metrology and Properties of Engineering Surfaces26–29 April 2000, University of Huddersfield, UK. International Journal of Machine Tools and Manufacture, 41 (13-14). p. 1845. ISSN 0890-6955

Blunt, Liam and Thomas, T.R. (2004) Wear ranking of hard on hard bearings for prosthetic hip joints. Wear, 257. pp. 1208-1212. ISSN 0043-1648

Blunt, Liam and Xiao, Shaojun (2011) The Use of Surface Segmentation Methods to Characterise Laser Zone Surface Structure on Hard Disc Drives. Wear, 271 (3-4). pp. 604-609. ISSN 0043-1648

Blunt, Liam, Zhang, Hongyu, Barrans, Simon, Jiang, Xiang and Brown, Leigh (2008) What results in fretting wear on polished femoral stems. Tribology International, 42 (11). pp. 1605-1614. ISSN 0301-679X

Boyle, A, Chen, Xun, Rowe, W. Brian and Allanson, D.R. (1997) Automatic dwell control in computer numerical control plunge grinding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 211 (7). pp. 565-575. ISSN 0954-4054

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Approximation of surface texture profiles. Journal of Physics, Series. pp. 264-267. ISSN 1742-6596

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Propagation of uncertainty in discretely sampled surface roughness profiles. Advanced mathematical and computational tools in metrology VII. pp. 271-275.

Brown, Leigh, Zhang, H., Blunt, Liam and Barrans, Simon (2007) Reproduction of fretting wear at the stem—cement interface in total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 221 (8). pp. 963-971. ISSN 0954-4119

Burrows, J., Griffiths, B. and Scott, Paul J. (2001) The use of vectors for defining the three-dimensional texture and asymmetric directionality of turned specimens. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215 (2). pp. 125-134. ISSN 0954-4054

Callender, M.J., Efstathiou, A., King, C.W., Walker, D.D., Gee, A.E., Lewis, A.J., Oldfield, S. and Steel, R.M. (2006) A swing arm profilometer for large telescope mirror element metrology. SPIE - International Society for Optical Engineering. Proceedings. ISSN 0277-786X

Chang, W.L., Luo, Xichun, Ritchie, J.M., Sun, J.N. and Mark, C. (2011) Fabrication of microfluidic injection moulds by a hybrid micromachining process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (3). pp. 458-462. ISSN 0954-4054

Chang, Wen Long, Luo, Xichun, Zhao, Qi Ling, Sun, Ji Ning and Zhao, Yi (2011) Laser Assisted Micro Grinding of High Strength Materials. Key Engineering Materials, 496. pp. 44-49. ISSN 1662-9795

Chang, Wenlong, Luo, Xichun, Ritchie, James M., Sun, Jining and Mack, Christopher (2011) Laser deburring process for structured edges on precision moulds. International Journal of Nanomanufacturing, 7 (3/4). pp. 327-335. ISSN 1746-9392

Chang, Wenlong, Sun, Jining, Luo, Xichun, Ritchie, James M. and Mack, Chris (2011) Investigation of microstructured milling tool for deferring tool wear. Wear, 271 (9-10). pp. 2433-2437. ISSN 0043-1648

Charlton, P. and Blunt, Liam (2007) Surface and form metrology of polished “freeform” biological surfaces. Wear, 264 (5-6). pp. 394-399. ISSN 0043-1648

Chen, J. X., Liang, Y. C., Yuan, X., Wang, Z.G. and Tong, Zhen (2010) MD simulation of nanocutting process: removal mechanism, defects evolvement, and characterization</title>. Proceedings of SPIE, 7655. 76550J-76550J. ISSN 0277-786X

Chen, Jia Xuan, Liang, Ying Chun, Yu, Xia, Wang, Zhi Guo and Tong, Zhen (2011) Deformation Mechanism of Diamond Nanocutting Single-Crystal Copper Using Molecular Dynamics Simulatio. Advanced Materials Research, 239-42. pp. 2775-2778. ISSN 1662-8985

Chen, Xun (1996) Analysis and simulation of the grinding process. Part I: Generation of the grinding wheel surface. International Journal of Machine Tools and Manufacture, 36 (8). pp. 871-882. ISSN 0890-6955

Chen, Xun (1996) Analysis and simulation of the grinding process. Part II: Mechanics of grinding. International Journal of Machine Tools and Manufacture, 36 (8). pp. 883-896. ISSN 0890-6955

Chen, Xun (1996) Analysis and simulation of the grinding process. Part III: Comparison with experiment. International Journal of Machine Tools and Manufacture, 36 (8). pp. 897-906. ISSN 0890-6955

Chen, Xun (1998) Analysis and simulation of the grinding process. Part IV: Effects of wheel wear. International Journal of Machine Tools and Manufacture, 38 (1-2). pp. 41-49. ISSN 0890-6955

Chen, Xun (2000) Analysis of the transitional temperature for tensile residual stress in grinding. Journal of Materials Processing Technology, 107 (1-3). pp. 216-221. ISSN 0924-0136

Chen, Xun (2009) Corrective Abrasive Polishing Processes for Freeform Surface. Key Engineering Materials, 404. pp. 103-112. ISSN 1013-9826

Chen, Xun (1998) Life cycle model of the grinding process. Computers in Industry, 36 (1-2). pp. 5-11. ISSN 0166-3615

Chen, Xun (2002) Precision grinding using CBN wheels. International Journal of Machine Tools and Manufacture, 42 (5). pp. 585-593. ISSN 0890-6955

Chen, Xun (2002) The sharpness of grinding wheels: an important measure of grinding behaviour. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216 (5). pp. 829-832. ISSN 0954-4054

Chen, Xun, Allanson, D.R., Thomas, A, Moruzzi, J and Rowe, W. Brian (1994) Simulation of feed cycles for grinding between centres. International Journal of Machine Tools and Manufacture, 34 (5). pp. 603-616. ISSN 0890-6955

Chen, Xun and Feng, Zhengming (2003) Effectiveness of Laser Cleaning for Grinding Wheel Loading. Key Engineering Materials, 238-39. pp. 289-294. ISSN 1013-9826

Chen, Xun, Feng, Zhi Jing and Pashby, I.R. (2004) Comparison of Laser Cleaning of A1(2)O(3) and CBN Grinding Wheels. Key Engineering Materials, 257-25. pp. 365-370. ISSN 1662-9795

Chen, Xun, Feng, Zhi Jing and Pashby, I.R. (2004) A study on laser cleaning of A1(2)O(3)grinding wheels. Key Engineering Materials, 257-25. pp. 359-364. ISSN 1662-9795

Chen, Xun and Griffin, James Marcus (2009) Grinding Burn and Chatter Classification Using Genetic Programming. Key Engineering Materials, 389-39. pp. 90-95. ISSN 1662-9795

Chen, Xun and Griffin, James Marcus (2007) Grinding acoustic emission classification in terms of mechanical behaviours. Key Engineering Materials, 329. pp. 15-20. ISSN 1662-9795

Chen, Xun and Griffin, James Marcus (2008) Grinding burn and chatter classification using genetic programming. Key Engineering Materials, 389-39. pp. 90-95. ISSN 1013-9826

Chen, Xun, Griffin, James Marcus and Liu, Qiang (2007) Mechanical and thermal behaviours of grinding acoustic emission. International Journal of Manufacturing Technology and Management, 12 (1/2/3). pp. 184-199. ISSN 1368-2148

Chen, Xun and Limchimchol, Thitikorn (2006) Monitoring Grinding Wheel Redress-life Using Support Vector Machines. International Journal of Automation and Computing, 3 (1). pp. 56-62. ISSN 1476-8186

Chen, Xun, Liu, Q.S. and Gindy, Nabil (2005) Signal Analysis of Acoustic Emission for Laser Imitating Grinding Burn. Key Engineering Materials, 291-29. pp. 91-96. ISSN 1662-9795

Chen, Xun and Opoz, Tahsin Tecelli (2010) Simulation of Grinding Surface Creation – A Single Grit Approach. Advanced Materials Research, 126-28. pp. 23-28. ISSN 1662-8985

Chen, Xun, Rowe, W. Brian, Allanson, D.R. and Mills, B. (1999) A Grinding Power Model for Selection of Dressing and Grinding Conditions. Journal of Manufacturing Science and Engineering, 121 (4). pp. 632-637. ISSN 1087-1357

Chen, Xun and Zhengbai, Lin (1989) Probe into the Characteristics of Grinding Wheel Wear. Journal of fuzhou University, 17 (2). pp. 70-75. ISSN 1000-2243

Clough, David A, Fletcher, Simon, Longstaff, Andrew P. and Willoughby, Peter (2012) Thermal Analysis for Condition Monitoring of Machine Tool Spindles. Journal of Physics: Conference Series, 364 (364). ISSN 1742-6596

Cochrane, W. A., Luo, Xichun, Lim, T., Taylor, W. D. and Schnetler, H. (2012) Design of a Micro-Autonomous Robot for Use in Astronomical Instruments. International Journal of Optomechatronics, 6 (3). pp. 199-212. ISSN 1559-9612

Cropper, M., Barlow, M., Perryman, M.A.C., Horne, K., Bingham, R., Page, M., Gutteridge, P. and Walker, D.D. (2003) A concept for a superconducting tunneling junction based spectrograph. Monthly Notices of the Royal Astronomical Society, 344. pp. 33-44. ISSN 0035-8711

D'Arrigo, P., Diego, F. and Walker, D.D. (1996) Active Compensation of Flexure on the WHT ISIS Spectrograph. Monthly Notices of the Royal Astronomical Society, 281. pp. 679-686. ISSN 0035-8711

Diego, F., Brooks, D., Charalambous, A., Crawford, I.A., D'Arrigo, P., Dryburgh, M., Jamshidi, H., Radley, A.S., Savidge, T. and Walker, D.D. (1997) Conceptual design of the high-resolution optical spectrograph for the Gemini South Telescope. Proceedings of SPIE, 2871. pp. 1126-1134. ISSN 0277-786X

Diego, F., Fish, A., Barlow, M., Crawford, I., Spyromolio, J., Dryburgh, M., Brooks, D., Howarth, I. and Walker, D.D. (1995) The Ultra-High-Resolution Facility at the Anglo-Australian Telescope. Monthly Notices of the Royal Astronomical Society, 272 (2). pp. 323-332. ISSN 0035-8711

Diego, F. and Walker, D.D. (1985) On the possibility of increasing the throughput of astronomical spectrographs by overfilling the dispersing element. Monthly Notices of the Royal Astronomical Society, 217. pp. 347-354. ISSN 0035-8711

Doel, A.L., Lee, J.H. and Walker, D.D. (2000) Adaptive secondary mirror developments at UCL. Proceedings of SPIE - The International Society for Optical Engineering, 4007. ISSN 0277-786X

Dunn, C.R. and Walker, D.D. (2008) Pseudo-random tool paths for CNC sub-aperture polishing and other applications. Optics Express, 16 (23). pp. 18942-18949. ISSN 1094-4087

Edwards, R.S., Sophian, A., Dixon, S., Tian, Gui Yun and Jiang, Xiang (2006) Dual EMAT and PEC non-contact probe: applications to defect testing. NDT & E International, 39 (1). pp. 45-52. ISSN 0963-8695

Feng, Z. and Chen, Xun (2006) Grinding Wheel Loading Features Extracted by Image Processing. Key Engineering Materials, 304-30. pp. 14-18. ISSN 1662-9795

Feng, Zhengming and Chen, Xun (2007) Image processing of grinding wheel surface. International Journal of Advanced Manufacturing Technology, 32 (1-2). pp. 27-33. ISSN 0268-3768

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2005) Investigation into the accuracy of a proposed laser diode based multilateration machine tool calibration system. Journal Paper of Physics: Conference Series, 13. pp. 398-401. ISSN 1742-6588

Freeman, J.M. and Ford, Derek G. (2003) Automated error analysis of serial manipulators and servo heads. Proceedings of the Institute of Mechanical Engineering Part C, 217 (9). pp. 1077-1084. ISSN 0954-4062

Freeman, J.M. and Ford, Derek G. (2005) The digital injection of signals into machine feedback loops via incremental encoder interfaces. Proceedings of the Institute of Mechanical Engineering Science Part C, 219 (3). pp. 325-329. ISSN 0954-4062

Gao, F., Leach, Richard K., Petzing, J and Coupland, J. M. (2008) Surface Measurement Errors using Commercial Scanning White Light Interferometers. Measurement Science and Technology, 19 (1). 015303. ISSN 0957-0233

Gao, F., Peng, G. and Koenders, L. (1998) Calibration of transfer standards for SPM. Microelectronic Engineering, 41 (42). pp. 615-618. ISSN 0167-9317

Gao, F. and Xu, Y. (1991) The Study of a Fold Cavity Fabry-Perot Interferometer and it’s Phase. Optoelectronic Engineering, 20 (3). pp. 18-20. ISSN 1003-501X

Garnaes, J., Kofod, N., Kuhle, A., Nielson, C., Dirscherl, K. and Blunt, Liam (2002) Calibration of step heights and roughness measurements with atomic force microscopes. Precision Engineering, 27 (1). pp. 91-98. ISSN 0141-6359

Goel, Saurav, Luo, Xichun, Comley, Paul, Reuben, Robert L and Cox, Andrew (2013) Brittle–ductile transition during diamond turning of single crystal silicon carbide. International Journal of Machine Tools and Manufacture, 65. pp. 15-21. ISSN 08906955

Goel, Saurav, Luo, Xichun, Reuben, R.L., Bin Rashid, Waleed and Sun, Ji Ning (2011) Simulation Study of Cutting Forces, Stresses and Temperature during Nanometric Cutting of Single Crystal Silicon. Key Engineering Materials, 496. pp. 223-228. ISSN 1662-9795

Goel, Saurav, Luo, Xichun, Reuben, R.L., Bin Rashid, Waleed and Sun, Ji Ning (2011) Single Point Diamond Turning of Single Crystal Silicon Carbide: Molecular Dynamic Simulation Study. Key Engineering Materials, 496. pp. 150-155. ISSN 1662-9795

Goel, Saurav, Luo, Xichun, Reuben, Robert L and Rashid, Waleed (2011) Atomistic aspects of ductile responses of cubic silicon carbide during nanometric cutting. Nanoscale Research Letters, 6 (1). p. 589. ISSN 1556-276X

Goel, Saurav, Luo, Xichun and Reuben, Robert L. (2012) Molecular dynamics simulation model for the quantitative assessment of tool wear during single point diamond turning of cubic silicon carbide. Computational Materials Science, 51 (1). pp. 402-408. ISSN 09270256

Goel, Saurav, Luo, Xichun and Reuben, Robert L. (2012) Shear instability of nanocrystalline silicon carbide during nanometric cutting. Applied Physics Letters, 100 (23). p. 231902. ISSN 0003-6951

Goel, Saurav, Luo, Xichun and Reuben, Robert L. (2013) Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process. Tribology International, 57. pp. 272-281. ISSN 0301679X

Goel, Saurav, Luo, Xichun, Reuben, Robert L. and Pen, Hongmin (2012) Influence of temperature and crystal orientation on tool wear during single point diamond turning of silicon. Wear, 284-28. pp. 65-72. ISSN 0043-1648

Goel, Saurav, Luo, Xichun, Reuben, Robert L. and Rashid, Waleed Bin (2012) Replacing diamond cutting tools with CBN for efficient nanometric cutting of silicon. Materials Letters, 68. pp. 507-509. ISSN 0167577X

Gray, C., Baker, I., Davies, G., Evans, R., Field, N., Fox-Leonard, T., Messelink, W., Mitchell, J., Rees, P., Waine, S., Walker, D.D. and Yu, G. (2013) Fast manufacturing of E-ELT mirror segments using CNC polishing. Proceedings of SPIE - The International Society for Optical Engineering, 8838. ISSN 0277-786X

Griffin, James Marcus and Chen, Xun (2009) Characteristics of the acoustic emission during horizontal single grit scratch tests: Part 2 classification and grinding tests. International Journal of Abrasive Technology, 2 (1). pp. 43-59. ISSN 1752-2641

Griffin, James Marcus and Chen, Xun (2009) Characteristics of the acoustic emission during horizontal single grit scratch tests: Part 1 characteristics and identification. International Journal of Abrasive Technology, 2 (1). pp. 25-42. ISSN 1752-2641

Griffin, James Marcus and Chen, Xun (2006) Classification of the acoustic emission signals of rubbing, ploughing and cutting during single grit scratch tests. International Journal of Nanomanufacturing, 1 (2). pp. 189-209. ISSN 1746-9392

Griffin, James Marcus and Chen, Xun (2009) Multiple classification of the acoustic emission signals extracted during burn and chatter anomalies using genetic programming. International Journal of Advanced Manufacturing Technology, 45 (11-12). pp. 1152-1168. ISSN 0268-3768

Han, Feng, Yang, Shuming, Jing, Weixuan, Wang, Liangjun, Li, Lei, Jiang, Zhuangde and Gao, Feng (2015) Effect of Ag Thin Films on the Photoluminescence of ZnO Films. Journal of Nanoscience and Nanotechnology, 15 (5). pp. 3796-3801. ISSN 1533-4880

Han, W-Y., Clayton, M. and Walker, D.D. (1996) Steps Towards Efficient Mosaic CCD System. Publications of the Astronomical Society of the Pacific, 108. pp. 1028-1032. ISSN 0004-6280

Han, W.Y., Clayton, M.J. and Walker, D.D. (1996) Steps toward efficient mosaic CCD system design. Publications of the Astronomical Society of the Pacific, 108 (729). pp. 1028-1032. ISSN 0004-6280

Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2003) Determination of stiffness and damping sensitivity for computer numerically controlled machine tool drives. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217 (10). pp. 1165-1177. ISSN 0954-4062

Hongwei, J., King, C. and Walker, D.D. (2010) Measurement of influence function using swing arm profilometer and laser tracker. Optics Express. ISSN 1094-4087

Hongwei, J., King, C. and Walker, D.D. (2010) Simulation and validation of a prototype swing arm profilometer for measuring extremely large telescope mirror-segments. Optics Express. ISSN 1094-4087

Howell, J.R., Blunt, Liam, Doyle, C., Hooper, R.M., Lee, A.C. and Ling, R.S.M. (2004) In Vivo surface wear mechanisms of femoral components of cemented total hip arthroplasties the influence of wear mechanism on clinical outcome. The Journal of Arthroplasty, 19 (1). pp. 88-101. ISSN 0883-5403

Hughes, Jack Bryan, Lazaridis, Pavlos, Glover, Ian and Ball, Andrew (2017) Opportunities for Transmission Power Control Protocols in Wireless Sensor Networks. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601

Hussain, Shahnawaz and Chen, Xun (2008) Remote milling tool-wear monitoring and direct wear features extraction by image processing. International Journal of Internet Manufacturing and Services, 1 (3). pp. 246-261. ISSN 1751-6048

Jackson, Mark J., Khangar, A., Chen, Xun, Robinson, Grant M., Venkatesh, V.C. and Dahotre, N.B. (2007) Laser cleaning and dressing of vitrified grinding wheels. Journal of Materials Processing Technology, 185 (1-3). pp. 17-23. ISSN 0924-0136

Jackson, Mark J., Robinson, Grant M. and Chen, Xun (2006) Laser Surface Preparation of Vitrified Grinding Wheels. Journal of Materials Engineering and Performance, 15 (2). pp. 247-250. ISSN 1059-9495

Jackson, Mark J., Robinson, Grant M. and Chen, Xun (2007) Laser processing of high performance grinding wheels. International Journal of Manufacturing Technology and Management, 12 (1/2/3). pp. 3-24. ISSN 1368-2148

Jiang, Xiang (2010) Robust solution for the evaluation of stratified functional surfaces. CIRP Annals - Manufacturing Technology, 59 (1). pp. 573-576. ISSN 0007-8506

Jiang, Xiang and Blunt, Liam (2001) Morphological assessment of orthopaedic implants using multiscalar wavelets. Wear, 250. pp. 217-221. ISSN 0043-1648

Jiang, Xiang and Blunt, Liam (2004) Third generation wavelet for the extraction of morphological features from micro and nano scalar surfaces. Wear, 257. pp. 1235-1240. ISSN 0043-1648

Jiang, Xiang, Blunt, Liam and Stout, K.J. (2001) Application of the lifting wavelet to rough surfaces. Precision Engineering, 25 (2). pp. 83-89. ISSN 0141-6359

Jiang, Xiang, Blunt, Liam and Stout, K.J. (2000) Development of a lifting wavelet representation for surface characterization. Proceedings of The Royal Society A Mathematical Physical and Engineering Sciences, 456 (2001). pp. 2283-2313. ISSN 13645021

Jiang, Xiang, Blunt, Liam and Stout, K.J. (2001) Lifting wavelet for three-dimensional surface analysis. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2163-2169. ISSN 0890-6955

Jiang, Xiang, Lin, D., Blunt, Liam, Zhang, W. and Zhang, L. (2006) Investigation of some critical aspects of on-line surface measurement by a wavelength-division-multiplexing technique. Measurement Science and Technology, 17. pp. 483-487. ISSN 0957-0233

Jiang, Xiang and Mahadevan, S. (2006) Bayesian cross-entropy methodology for optimal design of validation experiments. Measurement Science and Technology, 17. pp. 1895-1908. ISSN 0957-0233

Jiang, Xiang, Scott, Paul J. and Whitehouse, D.J. (2007) Freeform surface characterisation - a fresh strategy. CIRP Annals - 2007, 56 (1). pp. 553-556. ISSN 1726-0604

Jiang, Xiang, Scott, Paul J. and Whitehouse, D.J. (2008) Wavelets and their applications for surface metrology. CIRP Annals - Manufacturing Technology, 57 (1). pp. 555-558. ISSN 0007-8506

Jiang, Xiang, Scott, Paul J., Whitehouse, D.J. and Blunt, Liam (2007) Paradigm shifts in surface metrology. Part I. Historical philosophy. Proceedings of The Royal Society A Mathematical Physical and Engineering Sciences, 463 (2085). pp. 2049-2070. ISSN 1364-5021

Jiang, Xiang, Scott, Paul J., Whitehouse, D.J. and Blunt, Liam (2007) Paradigm shifts in surface metrology. Part II. The current shift. Proceedings of the Royal Society, A, 463 (2085). pp. 2071-2099. ISSN 1364-5021

Jiang, Xiang, Wang, Kaiwei, Gao, F. and Muhamedsalih, Hussam (2010) Fast surface measurement using wavelength scanning interferometry with compensation of environmental noise. Applied Optics, 49 (15). pp. 2903-2909. ISSN 1559-128X

Jiang, Xiang, Wang, Kaiwei and Martin, Haydn (2006) Near common-path optical fibre interferometer for potentially fast on-line micro/nano scale surface measurement. Optical Letters, 31. pp. 3603-3605. ISSN 0146-9592

Jiang, Xiang and Whitehouse, D.J. (2005) 7th International Symposium on Measurement Technology and Intelligent Instruments. Journal of Physics, Confer. ISSN 1742-6596

Jiang, Xiang and Whitehouse, D.J. (2006) Miniaturized optical measurement methods for surface nanometrology. CIRP Annals - Manufacturing Technology, 55 (1). pp. 577-580. ISSN 0007-8506

Jiang, Xiang, Zeng, Wenhan, Scott, Paul J. and Ma, J.W. (2008) Linear feature extraction based on complex ridgelet transform. Wear, 264 (5-6). pp. 428-433. ISSN 0043-1648

Jiang, Xiang, Zeng, Wenhan, Smith, I., Scott, Paul J. and Maletras, F. (2007) The detection of transient behaviour in environmental vibration for the Watt balance. Measurement Science and Technology, 18 (5). pp. 1487-1494. ISSN 0957-0233

Jiang, Xiang, Zhang, Xiangchao and Scott, Paul J. (2010) Template matching of freeform surfaces based on orthogonal distance fitting for precision metrology. Measurement Science and Technology, 21 (4). 045101. ISSN 0957-0233

Jiang, Xiangqian, Abdul-Rahman, Hussein S. and Scott, Paul J. (2013) Multi-scale freeform surface texture filtering using a mesh relaxation scheme. Measurement Science and Technology, 24 (11). ISSN 0957-0233

Kim, S-W. and Walker, D.D. (2001) Measurement of Two-dimesional Distribution of Pure Axial Force in Active Polishing. Measurement Science and Technology, 12. pp. 1976-1982. ISSN 0957-0233

Kim, S.W., Walker, D.D. and Brooks, D. (2003) Active profiling and polishing for efficient control of material removal from large precision surfaces with moderate asphericity. Mechatronics, 13. pp. 295-312. ISSN 0957-4158

King, C.W., Davies, G., Mitchell, J., Mitchell, P., Rees, P. and Walker, D.D. (2014) Fusing data from multiple interferometers for the measurement of off-axis aspheres. Proceedings - ASPE/ASPEN Summer Topical Meeting: Manufacture and Metrology of Freeform and Off-Axis Aspheric Surfaces. pp. 28-33. ISSN 9781887706650

Kong, L., Cheung, B., Jiang, Xiang, Lee, W., To, S., Blunt, Liam and Scott, Paul J. (2010) Characterization of Surface Generation of Optical Microstructures Using a Pattern and Feature Parametric Analysis Method. Precision Engineering, 34 (4). pp. 755-766. ISSN 0141-6359

Kovacicinova, Jana, Zhang, Peng, Li, Jie, Yu, Guoyu and Walker, David D. (2016) Development of swinging part profilometer for optics. Proceedings of SPIE, 10151. 101510B. ISSN 0277-786X

Lavrynenko, S.N., Nixon, G., Puttick, K.E. and Walker, D.D. (2002) Accidental and methodical defects of generation of precision and ultraprecision surfaces of polymer optics. Proceedings of SPIE - The International Society for Optical Engineering, 4411. pp. 102-105. ISSN 0277-786X

Leach, R.K., Giusca, C.L., Haitjema, H., Evans, C. and Jiang, Xiang (2015) Calibration and verification of areal surface texture measuring instruments. CIRP Annals - Manufacturing Technology, 64 (2). pp. 797-813. ISSN 0007-8506

Leach, Richard K., Chetwynd, D., Blunt, Liam, Haycocks, J., Harris, Peter M., Jackson, K., Oldfield, S. and Reilly, S. (2006) Recent advances in traceable nanoscale dimension and force metrology in the UK. Measurement Science and Technology, 17. pp. 467-476. ISSN 0957-0233

Lee, J.H., Bigelow, B.C., Walker, D.D., Doel, A.P. and Bingham, R.G. (2000) Why adaptive secondaries? Publications of the Astronomical Society of the Pacific, 112 (767). pp. 97-107. ISSN 0004-6280

Lee, J.H., Doel, A.P. and Walker, D.D. (2000) Adaptive secondary mirror demonstrator: construction and preliminary evaluation. Optical Engineering, 39 (4). ISSN 0091-3286

Lee, J.H., Walker, D.D. and Doel, A.P. (2000) An Adaptive Secondary Mirror demonstrator: Construction and Preliminary Evaluation. Optical Engineering, 39. pp. 1057-1062. ISSN 0091-3286

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2014) Rapid and accurate reverse engineering of geometry based on a multi-sensor system. International Journal of Advanced Manufacturing Technology, 74 (1-4). pp. 369-382. ISSN 0268-3768

Li, H., Cheung, C.F., Lee, W.B., To, S and Jiang, Xiang (2005) Characterisation of surface roughness for ultra-precision freeform surfaces. Journal of Physics: conference series, Series. pp. 32-35. ISSN 1742-6596

Li, H., Jiang, Xiang and Li, Z. (2005) Combination of M-estimation and Gaussian filtering for characterizing 3D Engineering surfaces. Key Engineering Materials, 295-29. pp. 459-464. ISSN 1013-9826

Li, H., Walker, D.D., Yu, G. and Zhang, W. (2013) Modeling and validation of polishing tool influence functions for manufacturing segments for an extremely large telescope. Applied Optics, 52 (23). pp. 5781-5787. ISSN 1559-128X

Li, H., Yu, G., Walker, D.D. and Evans, R. (2011) Modelling and measurement of polishing tool influence functions for edge control. Journal of the European Optical Society: Rapid Publications, 6 (ARTN 1). ISSN 1990-2573

Li, H., Zhang, W., Walker, D.D. and Yu, G. (2014) Active edge control in the precessions polishing process for manufacturing large mirror segments. Proceedings of SPIE: Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 9280. ISSN 1996-756X

Li, Huifen, Jiang, Xiang and Li, Zhu (2004) Robust estimation in Gaussian filtering for engineering surface characterization. Precision Engineering, 28 (2). pp. 186-193. ISSN 0141-6359

Li, T., Jiang, Xiang, Blunt, Liam, Scott, Paul J. and Xiao, Shaojun (2008) The Design and Use of F1 Softgauges for Validating Surface Metrology Software. Key Engineering Materials, 381-38. pp. 643-646. ISSN 1013-9826

Li, Tukun, Blunt, Liam A., Jiang, Xiangqian and Zeng, Wenhan (2013) An Information Model for Surface Metrology. Procedia CIRP, 10. pp. 251-258. ISSN 2212-8271

Liang, Bo, Iwnicki, S. and Zhao, Y. (2013) Application of Power Spectrum, Cepstrum, Higher Order Spectrum and Neural Network Analyses for Induction Motor Fault Diagnosis. Mechanical Systems and Signal Processing, 39 (1-2). pp. 342-360. ISSN 0888-3270

Liang, Yingchun, Liu, Jingshi, Sun, Yazhou, Lu, Lihua and Tong, Zhen (2011) Computational Fluid Dynamics Analysis of an Aerostatic Journal Bearing with Slot-Entry Restrictors. Advanced Science Letters, 4 (8-10). pp. 2817-2821. ISSN 1936-6612

Lin, Dejiao, Jiang, Xiang, Xie, Fang, Zhang, Wei, Zhang, Lin and Bennion, Ian (2004) High stability multiplexed fibre interferometer and its application on absolute displacement measurement and on-line surface metrology. Optics Express, 12 (23). pp. 5729-5734. ISSN 1094-4087

Liu, Qiang, Chen, Xun and Gindy, Nabil (2007) Assessment of Al2O3 and superabrasive wheels in nickel-based alloy grinding. International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 940-951. ISSN 0268-3768

Liu, Qiang, Chen, Xun and Gindy, Nabil (2007) Evaluation of superalloy heavy-duty grinding based on multivariate tests. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221 (9). pp. 1421-1430. ISSN 0954-4054

Liu, Qiang, Chen, Xun and Gindy, Nabil (2005) Fuzzy pattern recognition of AE signals for grinding burn. International Journal of Machine Tools and Manufacture, 45 (7-8). pp. 811-818. ISSN 08906955

Liu, Qiang, Chen, Xun and Gindy, Nabil (2006) Investigation of acoustic emission signals under a simulative environment of grinding burn. International Journal of Machine Tools and Manufacture, 46 (3-4). pp. 284-292. ISSN 08906955

Liu, Qiang, Chen, Xun, Wang, Yan and Gindy, Nabil (2008) Empirical modelling of grinding force based on multivariate analysis. Journal of Materials Processing Technology, 203 (1-3). pp. 420-430. ISSN 0924-0136

Liu, X, Cheng, K., Webb, D., Jiang, Xiang, Xiao, Shaojun, Longstaff, Andrew P., Widiyarto, H.M., Blunt, Liam and Ford, Derek G. (2003) Experimental investigation of the machined surface waviness, vibrations and cutting forces in peripheral milling. Key Engineering Materials, Advances in Abrasive Technology VI. pp. 213-218. ISSN 1013-9826

Liu, X., Cheung, K., Webb, D., Fiang, X.Q., Xiao, S.J., Longstaff, Andrew P., Widiyarto, H.M. and Jiang, Xiang (2004) Improved dynamic cutting force model in peripheral milling Part 2 Experimental verification and prediction. International Journal of Advanced Manufacturing Technology, 24. pp. 794-805. ISSN 0268-3768

Liu, X. and Gao, F. (2003) A novel multi-function tribological probe microscope for mapping surface properties. Measurement Science and Technology, 15 (1). pp. 91-102. ISSN 0957-0233

Liu, X.-W., Cheng, K., Longstaff, Andrew P., Widiyarto, H.M. and Ford, Derek G. (2004) Improved dynamic cutting force model in ball-end milling. Part I: theoretical modelling and experimental calibration. International Journal of Advanced Manufacturing Technology, 26 (5-6). pp. 457-465. ISSN 0268-3768

Liu, Xiaohong, Huang, Shujun, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2017) Full-field calibration of color camera chromatic aberration using absolute phase maps. Sensors, 17 (5). ISSN 1424-8220

Liu, Y. and Chen, Xun (2004) A study on the abrasive water jet cutting for granite. Key Engineering Materials, 257-25. pp. 527-534. ISSN 1662-9795

Liu, Yue, Huang, Shujun, Zhang, Zonghua, Gao, Nan, Gao, Feng and Jiang, Xiang (2017) Full-field 3D shape measurement of discontinuous specular objects by direct phase measuring deflectometry. Scientific Reports, 7 (10293). ISSN 2045-2322

Longstaff, Andrew P., Fletcher, Simon and Ford, Derek G. (2004) Better accuracy speaks volumes: lost in space. Machinery. pp. 14-16.

Lu, Wenlong, Jiang, Xiang, Liu, X.J. and Xu, Zhijie (2008) Compliance uncertainty of diameter characteristic in the next-generation geometrical product specifications and verification. Measurement Science and Technology, 19 (10). pp. 105103-1. ISSN 0957-0233

Lu, Wenlong, Jiang, Xiang, Qi, Qufen and Scott, Paul J. (2010) Modeling the integration between specifications and verification for cylindricity based on category theory. Measurement Science and Technology, 21 (11). ISSN 0957-0233

Lu, Y., Doel, A.P. and Walker, D.D. (2003) The Measurement of Small Displacements with a New Phase Shifting Method. SPIE - International Society for Optical Engineering. Proceedings, 42 (7). ISSN 0277-786X

Lu, Y., Doel, A.P., Walker, D.D. and Zhao, X. (2003) Dynamic measurement of displacement with a phase-shifting technique. Optical Engineering, 42. pp. 2006-2009. ISSN 0091-3286

Lui, X.W., Cheng, K., Longstaff, Andrew P., Widiyarto, Muhammad Helmi Nur and Ford, Derek G. (2005) Improved dynamic cutting force model in ball-end milling. Part 1: theoretical modelling and experimental calibration. International Journal of Advanced Manufacturing Technology, 26 (5). pp. 457-465. ISSN 0268-3768

Luo, Xichun, Goel, Saurav and Reuben, Robert L. (2012) A quantitative assessment of nanometric machinability of major polytypes of single crystal silicon carbide. Journal of the European Ceramic Society, 32 (12). pp. 3423-3434. ISSN 09552219

Luo, Xichun, Sun, Ji Ning, Chang, Wen Long and Ritchie, James M. (2012) Single Point Diamond Turning of Calcium Fluoride Optics. Key Engineering Materials, 516. pp. 408-413. ISSN 1662-9795

Luo, Xichun, Sun, Jining, Ritchie, James M., Chang, Wenlong and Wang, Wei (2011) Deterministic fabrication of nanostructures for plasmonic lens by focused ion beam. The International Journal of Advanced Manufacturing Technology, 57 (9-12). pp. 1003-1009. ISSN 0268-3768

Luo, Xichun, Tong, Zhen and Liang, Yingchun (2014) Investigation of the shape transferability of nanoscale multi-tip diamond tools in the diamond turning of nanostructures. Applied Surface Science, 321. pp. 495-502. ISSN 0169-4332

Ma, J.W., Jiang, Xiang and Scott, Paul J. (2005) Complex ridgelets for shift invariant characterizaion of surface topography with line singularities. Physics Letters A, 344. pp. 423-431. ISSN 0375-9601

Ma, L.M., Jiang, Xiang, Xu, Z. and Li, Z. (2005) An investigation on the technical standard strategy for China's manufacturing industry. Journal of Physics: conference series, 13. pp. 389-393. ISSN 1742-6596

Martin, Haydn and Jiang, Xiang (2010) Rapid phase shifting fiber interferometer with optical stylus. Optical Letters, 35 (5). pp. 655-657. ISSN 0146-9592

Martin, Haydn and Jiang, Xiangqian (2013) Dispersed reference interferometry. CIRP Annals - Manufacturing Technology, 62 (1). pp. 551-554. ISSN 0007-8506

Martin, Haydn, Kumar, Prashant and Jiang, Xiangqian (2014) A hybrid photonics based sensor for surface measurement. CIRP Annals - Manufacturing Technology, 63 (1). pp. 549-552. ISSN 0007-8506

Martin, Haydn, Wang, Kaiwei and Jiang, Xiang (2008) Vibration compensating beam scanning interferometer for surface measurement. Applied Optics, 47 (7). pp. 888-893. ISSN 0003-6935

Mills, B, Chen, Xun, Rowe, W. Brian and Li, Y (1999) Study and selection of grinding conditions Part 2: a hybrid intelligent system for selection of grinding conditions. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 213 (2). pp. 131-142. ISSN 0954-4054

Mishra, Rakesh, Alseddiqi, Mohamed and Pislaru, Crinela (2009) An Improved Employability Skills Model and its Compliance Through Vocational Educational System in Bahrain. The International Journal of Learning, 16 (9). pp. 699-718. ISSN 1447-9494

Moschetti, Giuseppe, Forbes, Alistair B., Leach, Richard, Jiang, Xiang and Connor, Daniel (2016) Quadrature wavelength scanning interferometry. Applied Optics, 55 (20). pp. 5332-5340. ISSN 1559-128X

Muller, Matthias, Barrans, Simon and Blunt, Liam (2011) Predicting Plastic Deformation and Work Hardening during V-Band Formation. Journal of Materials Processing Technology, 211 (4). pp. 627-636. ISSN 0924-0136

Murphy, Ciaran C. and Blunt, Liam (2005) Surface texture of hip implants. Advanced Materials & Processes, 163 (10).

Myers, Alan (2004) Firm foundations for sure. Machinery, 162 (4. p. 48.

Myers, Alan, Ford, Derek G. and Xu, Q. (2005) Measurement techniques for determining the static stiffness of foundations for machine tools. Journal Paper of Physics: Conference Series, 13. pp. 410-413. ISSN 1742-6588

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modern techniques for condition monitoring of railway vehicle dynamics. Journal of Physics: Conference Series, 364. 012016. ISSN 1742-6596

O'Dell, Stephen L., Citterio, O., Pareschi, Giovanni, Civitani, M. M., Arnold, J., Campana, S., Combrinck, H., Conconi, P., Cotroneo, V., Freeman, R., Mattaini, E., Morton, R., Motta, G., Pareschi, G., Parodi, G., Proserpio, L., Schuler, S., Simpson, P., Tagliaferri, G. and Walker, D.D. (2011) Progress on precise grinding and polishing of thin glass monolithic shell (towards WFXT). Proceedings of SPIE, 8147. p. 814714. ISSN 0277-786X

Odeleye, Akinlolu Oyekunle Oluseun, Castillo-Avila, Sara, Boon, Mathew, Martin, Haydn and Coopman, Karen (2017) Development of an optical system for the non-invasive tracking of stem cell growth on microcarriers. Biotechnology and Bioengineering, 114 (9). pp. 2032-2042. ISSN 0006-3592

Oluwajobi, Akinjide O. and Chen, Xun (2011) The Effect of Interatomic Potentials on the Molecular Dynamics Simulation of Nanometric Machining. International Journal of Automation and Computing, 8 (3). pp. 326-332. ISSN 1476-8186

Oluwajobi, Akinjide O. and Chen, Xun (2010) The fundamentals of modelling abrasive machining using molecular dynamics. International Journal of Abrasive Technology, 3 (4). pp. 354-381. ISSN 1752-2641

Parkinson, Simon, Longstaff, Andrew P., Allen, Gary, Crampton, Andrew, Fletcher, Simon and Myers, Alan (2011) Hierarchical Task Based Process Planning For Machine Tool Calibration. Proceedings of The 29th Workshop of the UK Planning and Scheduling Special Interest Group (PlanSIG2011). pp. 53-60. ISSN 1368-5708

Peggs, G., May-Miller, R., Walker, D.D., Atad-Ettedgui, E., Shore, P.R. and Smith, D.J. (2004) Dimensional metrology of mirror segments for extremely large telescopes. SPIE - International Society for Optical Engineering. Proceedings, 5382. pp. 224-228. ISSN 0277-786X

Pen, H.M., Liang, Y.C., Luo, Xichun, Bai, Q.S., Goel, S. and Ritchie, J.M. (2011) Multiscale simulation of nanometric cutting of single crystal copper and its experimental validation. Computational Materials Science, 50 (12). pp. 3431-3441. ISSN 09270256

Peng, H.P., Jiang, Xiang and Liu, X.J. (2008) Concurrent optimal allocation of design and process tolerances for mechanical assemblies with interrelated dimension chains. International Journal of Production Research, 46 (24). pp. 6963-6979. ISSN 00207543

Peng, H.P., Jiang, Xiang, Xu, Zhijie and Liu, X.J. (2008) Optimal tolerance design for products with correlated characteristics by considering the present worth of quality loss. International Journal of Advanced Manufacturing Technology, 39 (1-2). pp. 1-8. ISSN 0268-3768

Perkins, Christopher, Longstaff, Andrew P., Fletcher, Simon and Willoughby, Peter (2012) Practical Implementation of Machine tool Metrology and Maintenance Management Systems. Journal of Physics: Conference Series, 364. 012105. ISSN 1742-6596

Pislaru, Crinela, Ford, Derek G. and Holroyd, Geoffrey (2004) Hybrid modelling and simulation of a computer numerical control machine tool feed drive. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 218 (2). pp. 111-120. ISSN 0959-6518

Pislaru, Crinela, Freeman, J.M. and Ford, Derek G. (2003) Modal parameter identification for CNC machine tools using wavelet transform. International Journal of Machine Tools and Manufacture, 43 (10). pp. 987-993. ISSN 0890-6955

Qi, Qunfen, Jiang, Xiang and Scott, Paul J. (2012) Knowledge modeling for specifications and verification in areal surface texture. Precision Engineering, 36 (2). pp. 322-333. ISSN 0141-6359

Rajput, N.S., Tong, Zhen, Verma, H.C. and Luo, X. (2015) Ion-beam-assisted fabrication and manipulation of metallic nanowires. Micro & Nano Letters, 10 (7). pp. 334-338. ISSN 1750-0443

Rajput, Nitul S., Tong, Zhen and Luo, Xichun (2014) Investigation of ion induced bending mechanism for nanostructures. Materials Research Express, 2 (1). ISSN 2053-1591

Ramasawmy, H. and Blunt, Liam (2002) 3D surface topography assessment of the effect of different electrolytes during electrochemical polishing of EDM surfaces. International Journal of Machine Tools and Manufacture, 42 (5). pp. 567-574. ISSN 0890-6955

Ramasawmy, Haree and Blunt, Liam (2007) Investigation of the effects of electrochemical polishing on EDM surfaces. International Journal of Manufacturing Technology and Management, 31 (11-12). pp. 1135-1147. ISSN 1368-2148

Rosen, B-G, Blunt, Liam and Thomas, T.R. (2005) On in-vivo skin topography metrology and replication techniques. Journal of Physics: conference series, 13. pp. 325-329. ISSN 1742-6596

Rowe, W. Brian and Chen, Xun (1997) Characterization of the size effect in grinding and the sliced bread analogy. International Journal of Production Research, 35 (3). pp. 887-899. ISSN 0020-7543

Rowe, W. Brian and Chen, Xun (1999) Modelling surface roughness improvement in grinding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 213 (1). pp. 93-96. ISSN 0954-4054

Rowe, W. Brian, Li, Yan, Chen, Xun and Mills, B. (1997) An Intelligent Multiagent Approach for Selection of Grinding Conditions. CIRP Annals - Manufacturing Technology, 46 (1). pp. 233-238. ISSN 0007-8506

Rozelot, J.P., Bingham, R. and Walker, D.D. (1994) Lightweight Telescopes for Lunar Observatories. Advances in Space Research, 14 (6). pp. 129-135. ISSN 0273-1177

Rubio Rodriguez, Luis, De la Sen Parte, Manuel, Longstaff, Andrew P. and Fletcher, Simon (2013) Model-based Expert System to Automatically Adapt Milling Forces in Pareto Optimal Multi-Objective Working Points. Expert Systems With Applications, 40 (6). pp. 2312-2322. ISSN 0957-4174

Scott, Paul J. (2004) Pattern analysis and metrology: the extraction of stable features from observable measurements. Proceedings of the Royal Society, A, 460. pp. 2845-2864. ISSN 1364-5021

Scott, Paul J. (2003) Recent developments in the measurement of aspheric surfaces by contact stylus instrumentation. Proceedings of SPIE, 4927. pp. 199-207. ISSN 0277-786X

Scott, Paul J. (2001) An algorithm to extract critical points from lattice height data. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 1889-1897. ISSN 0890-6955

Scott, Paul J. (2006) The case of surface texture parameter RSm. Measurement Science and Technology, 17 (3). pp. 559-564. ISSN 09570233

Scott, Paul J. and Forbes, Alistair B. (2012) Mathematics for modern precision engineering. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 4066-4088. ISSN 1364-503X

Senin, N., Blunt, Liam and Tolley, M. (2012) Dimensional metrology of micro parts by optical three-dimensional profilometry and areal surface topography analysis. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (11). pp. 1819-1832. ISSN 0954-4054

Senin, Nicola, Blunt, Liam and Tolley, Martin (2012) The use of areal surface topography analysis for the inspection of micro-fabricated thin foil laser targets for ion acceleration. Measurement Science and Technology, 23 (10). p. 105004. ISSN 0957-0233

Senin, Nicola, Leach, Richard K., Pini, Stefano and Blunt, Liam A. (2015) Texture-based segmentation with Gabor filters, wavelet and pyramid decompositions for extracting individual surface features from areal surface topography maps. Measurement Science and Technology, 26 (9). 095405. ISSN 0957-0233

Shoghi, K., Barrans, Simon and Rao, H.V. (2005) Plastic deformation in flat-section band clamps. Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science, 219 (1). pp. 93-102. ISSN 0954-4062

Shoghi, K., Barrans, Simon and Rao, H.V. (2004) Stress in V-section band clamps. Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science, 218 (3). pp. 251-261. ISSN 0954-4062

Song, C., Walker, D.D. and Yu, G. (2011) Misfit of rigid tools and interferometer subapertures on off-axis aspheric mirror segments. Optical Engineering, 50 (7). ISSN 0091-3286

Stout, K.J. and Barrans, Simon (2000) The design of aerostatic bearings for application to nanometre resolution manufacturing machine systems. Tribology International, 33 (12). pp. 803-809. ISSN 0301-679X

Stout, K.J. and Blunt, Liam (2001) A contribution to the debate on surface classifications—random, systematic, unstructured, structured and engineered. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2039-2044. ISSN 0890-6955

Su, Yang, Xu, Zhijie and Jiang, Xiang (2009) Real-time VE Signal Extraction and Denoising Using Programmable Graphics Hardware. International Journal of Automation and Computing, 6 (4). pp. 326-334. ISSN 1476-8186

Sun, Dengyue, Chen, Xun, Du, Fengshan, Zhu, Guangming and Zhou, Jiangang (2005) Dynamic thickness simulation of five-stand continuous cold rolling. Journal of Materials Processing Technology, 167 (2-3). pp. 218-223. ISSN 0924-0136

Sun, J, Luo, Xichun, Chang, W, Ritchie, J M, Chien, J and Lee, A (2012) Fabrication of periodic nanostructures by single-point diamond turning with focused ion beam built tool tips. Journal of Micromechanics and Microengineering, 22 (11). p. 115014. ISSN 0960-1317

Sun, J., Luo, Xichun, Ritchie, J. and Hrncir, T. (2012) A predictive divergence compensation approach for the fabrication of three-dimensional microstructures using focused ion beam machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (2). pp. 229-238. ISSN 0954-4054

Sun, J., Luo, Xichun, Ritchie, J.M., Chang, W. and Wang, W. (2012) An investigation of redeposition effect for deterministic fabrication of nanodots by focused ion beam. Precision Engineering, 36 (1). pp. 31-36. ISSN 0141-6359

Sun, Ji Ning, Luo, Xichun, Chang, Wen Long and Ritchie, James M. (2012) Fabrication of Freeform Micro Optics by Focused Ion Beam. Key Engineering Materials, 516. pp. 414-419. ISSN 1662-9795

Szumski, R. and Walker, D.D. (1999) The Immersed Echelle - I Basic Properties. Monthly Notices of the Royal Astronomical Society, 302. pp. 139-144. ISSN 0035-8711

Takahashi, Tadayuki, Civitani, M. M., Citterio, O., Campana, S., Conconi, P., Mattaini, E., Pareschi, G., Tagliaferri, G., Parodi, G., Burwitz, V., Hartner, G. D., Arnold, J., Schuler, S., Combrinck, H., Freeman, R., Morton, R., Simpson, P., Walker, D.D., Murray, Stephen S. and den Herder, Jan-Willem A. (2012) Thin glass shell oriented to wide field x-ray telescope. Proceedings of SPIE, 8443. 84430Q. ISSN 0277-786X

Tang, Dawei, Gao, Feng and Jiang, Xiangqian (2014) On-line surface inspection using cylindrical lens-based spectral domain low-coherence interferometry. Applied Optics, 53 (24). pp. 5510-5516. ISSN 1559-128X

Thomas, T.R., Rosén, B.-G., Zahouani, H., Blunt, Liam and Mansori, M. El (2011) Traceology, quantifying finishing machining and function: a tool and wear mark characterisation study. Wear, 271 (3/4). pp. 553-558. ISSN 00431648

Tian, Jia, Chen, Xun and Dong, Shen-Ping (2005) Multi-Modal Reasoning Medical Diagnosis System Integrated With Probabilistic Reasoning. International Journal of Automation and Computing, 2 (2). pp. 134-143. ISSN 1476-8186

Tong, Zhen, Liang, Yingchun, Yang, Xuechun and Luo, Xichun (2014) Investigation on the thermal effects during nanometric cutting process while using nanoscale diamond tools. International Journal of Advanced Manufacturing Technology, 74 (9-12). pp. 1709-1718. ISSN 0268-3768

Tong, Zhen and Luo, Xichun (2015) Investigation of focused ion beam induced damage in single crystal diamond tools. Applied Surface Science, 347. pp. 727-735. ISSN 0169-4332

Tonnellier, X., Morantz, P., Shore, P., Baldwin, A., Evans, R. and Walker, D.D. (2007) Subsurface damage in precision ground ULE (R) and Zerodur (R) surfaces. Optics Express, 15 (19). pp. 12197-12205. ISSN 1094-4087

Tonnellier, X., Shore, P., Luo, X., Morantz, P., Baldwin, A., Evans, R. and Walker, D.D. (2006) Wheel Wear and Surface/Subsurface Qualities when Precision Grinding Optical Materials. SPIE - International Society for Optical Engineering. Proceedings, 6273. pp. 8-16. ISSN 0277-786X

Walker, D.D., Beaucamp, A., Evans, R., Fox-Leonard, T., Fairhurst, N., Gray, C., Hamidi, S., Li, H., Messalink, W., Mitchell, J., Rees, P. and Yu, G. (2012) Edge-control and surface-smoothness in sub-aperture polishing of mirror segments. Proceedings of SPIE - The International Society for Optical Engineering, 8450. ISSN 0277-786X

Walker, D.D. (2006) £1m Zeeko Machine will Help OpTIC Polish up the Opto-electronics Sector. Welsh Optoelectronics Forum Newsletter.

Walker, D.D. (2008) Announcement of 5M Euro contract to produce seven prototype mirror segments for the European Extremely Large Telescope. Welsh Optoelectronics Newsletter.

Walker, D.D. (2005) OpTIC Hosts New National Centre for Ultra Precision Surfaces. Welsh Optoelectronics Forum Newsletter.

Walker, D.D., Atkins, C., Baker, I., Evans, R., Hamidi, S., Harris, P., Li, H., Messelink, W., Mitchell, J., Parry-Jones, M., Rees, P. and Yu, G. (2011) Technologies for producing segments for Extremely Large Telescopes. Proceedings of SPIE, 8126. ISSN 0277-786X

Walker, D.D., Beaucamp, A., Bibby, M., Fox-Leonard, T., Gray, C., King, C., Rees, P. and Yu, G. (2014) Interactions between manufacture and measurement of off-axis aspheres. Proceedings - ASPE/ASPEN Summer Topical Meeting: Manufacture and Metrology of Freeform and Off-Axis Aspheric Surfaces. pp. 72-77. ISSN 9781887706650

Walker, D.D., Beaucamp, A., Brooks, D., Doubrovski, V., Cassie, M.D., King, A., Libert, M., McCavana, G., Morton, R., Riley, D. and Simms, J. (2004) Recent developments of precessions polishing for larger components and free-form surfaces. SPIE - International Society for Optical Engineering. Proceedings, 5523. pp. 281-289. ISSN 0277-786X

Walker, D.D., Beaucamp, A., Dunn, C., Evans, R., Freeman, R., Morton, R., Wei, X. and Yu, G. (2008) Active Control of Edges and Global Microstructure on Segmented Mirrors. SPIE - International Society for Optical Engineering. Proceedings. ISSN 0277-786X

Walker, D.D., Beaucamp, A., Yu, G. and Li, H. (2010) Edge-control on mirror segments. Optics InfoBase Conference Papers. ISSN 2162-2701

Walker, D.D., Beaucamp, A.T., Brooks, D., Doubrovski, V., Cassie, M.D., Dunn, C., Freeman, R.R., King, A., Libert, M., McCavana, G., Morton, R., Riley, D. and Simms, J. (2004) New results from the Precessions polishing process scaled to larger sizes. SPIE - International Society for Optical Engineering. Proceedings, 5494. pp. 71-80. ISSN 0277-786X

Walker, D.D., Beaucamp, A.T.H., Doubrovski, V., Dunn, C., Freeman, R., Hobbs, G., McCavana, G., Morton, R., Riley, D., Simms, J. and Wei, X. (2005) New Developments in the Precessions process for Manufacturing Freeform, Large-optical, and Precision-mechanical Surfaces. SPIE - International Society for Optical Engineering. Proceedings, 6148. p. 614805. ISSN 0277-786X

Walker, D.D., Beaucamp, A.T.H., Doubrovski, V., Dunn, C., Freeman, R., Hobbs, G., McCavana, G., Morton, R., Riley, D., Simms, J. and Wei, X. (2006) New developments in the Precessions process for manufacturing free-form, large-optical, and precision-mechanical surfaces. SPIE - International Society for Optical Engineering. Proceedings. ISSN 0277-786X

Walker, D.D., Beaucamp, A.T.H., Doubrovski, V., Dunn, C., Freeman, R., Hobbs, G., McCavana, G., Morton, R., Riley, D., Simms, J. and Wei, X. (2005) Recent advances in the control of form and texture on free-form surfaces (invited paper). SPIE - International Society for Optical Engineering. Proceedings, 5965. ISSN 0277-786X

Walker, D.D., Beaucamp, A.T.H., Doubrovski, V., Dunn, C., Freeman, R., McCavana, G., Morton, R., Riley, D., Simms, J. and Wei, X. (2005) New results extending the Precessions process to smoothing ground aspheres and producing freeform parts. SPIE - International Society for Optical Engineering. Proceedings, 5869. pp. 79-87. ISSN 0277-786X

Walker, D.D., Brooks, D., King, A., Freeman, R., Morton, R., McCavana, G. and Sug-Whan, K. (2003) The precessions tooling for polishing and figuring flat,spherical and aspheric surfaces. Optics Express, 11 (8). pp. 958-964. ISSN 1094-4087

Walker, D.D., Citterio, O., Civitani, M.M., Arnold, J., Campana, S., Combrinck, H., Conconi, P., Cotroneo, V., Freeman, R., Mattaini, E., Morton, R., Motta, G., Pareschi, G., Parodi, G., Proserpio, L., Schuler, S., Simpson, C. and Tagliaferri, G. (2011) Progress on precise grinding and polishing of thin glass monolithic shell (towards WFXT). Proceedings of Optical Manufacturing and Testing IX conference.

Walker, D.D. and D'Arrigo, P. (1996) On the Stability of Cassegrain Spectrographs'. Monthly Notices of the Royal Astronomical Society, 281. pp. 673-678. ISSN 0035-8711

Walker, D.D. and Diego, F. (1985) Design Philosophy of the forthcoming echelle spectrographs for the AAT and LPO. Monthly Notices of the Royal Astronomical Society, 217. pp. 355-365. ISSN 0035-8711

Walker, D.D., Freeman, R., Morton, R., McCavana, G. and Beaucamp, A. (2006) Use of the 'Precessions'(TM) process for prepolishing and correcting 2D & 2 1/2 D form. Optics Express, 14 (24). pp. 11787-11795. ISSN 1094-4087

Walker, D.D., Freeman, R., Morton, R., McCavana, G. and Beaucamp, A. (2006) Use of the ‘Precessions’™ process for prepolishing and correcting 2D & 2½D form. Optics Express, 14 (24). pp. 11787-11795. ISSN 1094-4087

Walker, D.D., Jing, H. and King, C. (2010) Alignment and arm length measurement of the Swing Arm Profilometer using a laser tracker. SPIE - International Society for Optical Engineering. Proceedings. ISSN 0277-786X

Walker, D.D., Sandford, P., Lyons, A., Fordham, J., Bone, D., Walker, A. and Boksenberg, A. (1985) The UCL Charge-Coupled Device Camera at the South African Astronomical Observatory. Advances in Electronics and Electron Physics, 64 A. pp. 185-192. ISSN 0065-2539

Walker, D.D., Soon, Y. and Sug-Whan, K. (2003) Novel hybrid stylus for nanometric profilometry for large optical surfaces. Optics Express, 11 (15). pp. 1793-1798. ISSN 1094-4087

Walker, D.D., Yu, G., Li, H., Messelink, W., Evans, R. and Beaucamp, A. (2012) Edges in CNC polishing: from mirror-segments towards semiconductors, paper 1: edges on processing the global surface. Optics Express, 20 (18). pp. 19787-19798. ISSN 1094-4087

Walker, David D., Davies, Gary, Fox-Leonard, Tony, Gray, Caroline, Mitchell, John, Rees, Paul, Wu, Hsing Yu, Volkov, Andy and Yu, Guo Yu (2014) Advanced abrasive processes for manufacturing prototype mirror segments for the world’s largest telescope. Advanced Materials Research, 1017. pp. 532-538. ISSN 1662-8985

Walker, David D., Yu, Guo Yu, Gray, Caroline, Rees, Paul, Bibby, Matthew, Wu, Hsing Yu and Zheng, Xiao (2016) Process automation in computer controlled polishing. Advanced Materials Research, 1136. pp. 684-689. ISSN 1662-8985

Wang, J., Jiang, Xiang, Ma, L.M., Xu, Z. and Li, Z. (2005) Uncertainty of spatial straightness in 3D measurement. Journal of Physics, 13. pp. 220-223. ISSN 1742-6596

Wang, Kaiwei, Blunt, Liam, Mao, L.T., Chao, C.C. and Stout, K.J. (2001) The effects of operational parameters on surface characteristics of the ballised material. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2071-2078. ISSN 0890-6955

Wang, Kaiwei, Cai, Z.J. and Zeng, L.J. (2005) A two-dimensional surface profile imaging technique based on heterodyne interferometer. Key Engineering Materials, 295-29. pp. 477-482. ISSN 1013-9826

Wang, Kaiwei, Martin, Haydn and Jiang, Xiang (2008) Actively stabilized optical fiber interferometry technique for online/in-process surface measurement. Review of scientific instruments, 79 (2). 023109. ISSN 0034-6748

Wang, Kaiwei and Zeng, L. (2005) Double-grating frequency shifter for low-coherence heterodyne interferometry. Optics Communications, 251 (1-3). pp. 1-5. ISSN 0030-4018

Wang, Kaiwei and Zeng, L. (2005) Heterodyne Fourier transform spectroscopy based on double-grating frequency shifter. Review of Scientific Instruments, 76 (6). 063108. ISSN 00346748

Wang, Kaiwei and Zeng, L. (2005) Two-dimensional surface-profile imaging technique based on double-grating frequency shifter. Applied Optics, 44 (22). pp. 4625-4630. ISSN 0003-6935

Wang, Kaiwei, Zeng, L. and Yin, C. (2003) Influence of the incident wave-front on intensity distribution nondiffracting beam used in large-scale measurement. Optics Communications, 216. pp. 99-103. ISSN 0030-4018

Wang, Wei, Yu, Guoyu, Xu, Min and Walker, David D. (2014) Coordinate transformation of an industrial robot and its application in deterministic optical polishing. Optical Engineering, 53 (5). 055102. ISSN 0091-3286

Wang, Y, Chen, Xun and Gindy, Nabil (2005) Fixturing error measurement and analysis using CMMs. Journal Paper of Physics: Conference Series, 13. pp. 163-166. ISSN 1742-6588

Wang, Y., Chen, Xun and Gindy, Nabil (2007) Surface error decomposition for fixture development. International Journal of Advanced Manufacturing Technology, 31 (9-10). pp. 948-956. ISSN 0268-3768

Wang, Y., Chen, Xun, Gindy, Nabil and Xie, J. (2008) Elastic deformation of a fixture and turbine blades system based on finite element analysis. International Journal of Advanced Manufacturing Technology, 36 (3-4). pp. 296-304. ISSN 0268-3768

Wang, Yan, Chen, Xun and Gindy, Nabil (2005) Deformation Analysis of Fixturing for Workpiece with Complex Geometry. Key Engineering Materials, 291-29. pp. 631-636. ISSN 1662-9795

Wang, Yan, Scott, Paul J. and Jiang, Xiang (2005) The structure of surface texture knowledge. Journal of Physics: conference series, 13. pp. 1-4. ISSN 1742-6596

Whitehouse, D.J. (2008) Nanometrology. Contemporary Physics, 49 (5). pp. 351-374. ISSN 00107514

Woodcock, Rebecca, Muhamedsalih, Hussam, Martin, Haydn and Jiang, Xiangqian (2016) Burg algorithm for enhancing measurement performance in wavelength scanning interferometry. Surface Topography: Metrology and Properties, 4 (2). 024003. ISSN 2051-672X

Wu, Xin, Yu, Yingjie, Zeng, Wenhan, Qi, Te, Chen, Mingyi and Jiang, Xiangqian (2017) Non-overlap subaperture interferometric testing for large optics. Optics Communications, 396. pp. 191-198. ISSN 0030-4018

Xiao, Shaojun, Jiang, Xiang, Blunt, Liam and Scott, Paul J. (2001) Comparison study of the biorthogonal spline wavelet filtering for areal rough surfaces. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2103-2111. ISSN 08906955

Xiao, Shaojun, Xie, F., Blunt, Liam, Scott, Paul J. and Jiang, Xiang (2006) Feature extraction for structured surface based on surface networks and edge detection. Materials Science in Semiconductor Processing, 9 (1-3). pp. 210-214. ISSN 1369-8001

Xie, F, Xiao, S, Blunt, Liam, Zeng, Wenhan and Jiang, Xiang (2008) Automated bullet-identification system based on surface topography techniques. Wear, 266. pp. 518-522. ISSN 0043-1648

Xie, F., Zhang, W., Jiang, Xiang, Zhang, L. and Bennion, Ian (2003) Novel spatial scanning technique for surface roughness measurement. Lasers and Electro-Optics Society, IEEELEOS, 1 (27-28). pp. 97-98.

Xu, Qiang and Barrans, Simon (2003) The Development of multi-axial creep damage constitutive equations for 0.5Cr0.5Mo0.25V ferritic steel at 590.DEG.C.. JSME International Journal Series A, 46 (1). pp. 51-59. ISSN 13447912

Xu, Qiang, Cunningham, J. and Ford, Derek G. (2003) The improvement of geometric accuracy of FMS machine through retrofitting and compensation. International Journal for Manufacturing Science and Production, 5 (1/2). pp. 67-72. ISSN 0793-6648

Xu, Y., Ye, X., Xu, J., Li, C. and Gao, F. (1993) A Fabry—Perot Interferometer for Measuring Micro-Displacement. ACTA Metrologica SINCA, 14 (2). pp. 94-98. ISSN 0894-0525

Xu, Y., Ye, X., Xu, J., Li, C. and Gao, F. (1990) A High Precision Heterodyne Laser Interferometer for Measuring Micro-displacement. ACTA Metrologica SINICA, 11 (1). pp. 32-35.

Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2008) Category theory-based object-oriented data management for web-based virtual manufacturing. International Journal of Internet Manufacturing and Services, 1 (2). pp. 136-159. ISSN 1751-6048

Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2007) Machining surface texture knowledge management using a category theory-based object-oriented database. Communications of SIWN (formerly: System and Information Sciences Notes), 1 (1). pp. 83-88. ISSN 1757-4439

Xu, Yuanping, Xu, Zhijie, Jiang, Xiang and Paul, Scott (2010) Developing a Knowledge-based System for Complex Geometrical Product Specification (GPS) Data Manipulation. Knowledge Based Systems, 24 (1). pp. 10-22. ISSN 0950-7051

Yang, H., Kim, S. and Walker, D.D. (2004) A novel profilometer for nanometric form assessment for large machined surfaces. Key Engineering Materials, Advances in Abrasive Technology VI, 257. pp. 225-230. ISSN 1013-9826

Yang, H.S., Kim, S.W. and Walker, D.D. (2003) A novel laser datum series for nanometric profilometry for large optical surfaces. Optics Express, 11 (6). pp. 624-631. ISSN 1094-4087

Yang, H.S. and Walker, D.D. (2002) Progress on development of prototype laser reference system for stylus profilometry of large optics. Proceedings of SPIE, 4411. pp. 161-170. ISSN 0277-786X

Yang, Li, Wang, Zhiguo, Liang, Yingchun, Chen, Mingjun, Tong, Zhen, Chen, Jiaxuan, Namba, Yoshiharu, Walker, David D. and Li, Shengyi (2010) Analysis about diamond tool wear in nano-metric cutting of single crystal silicon using molecular dynamics method. Proceedings of SPIE, 7655. 76550O-76550O. ISSN 0277-786X

Yang, Shuming and Jiang, Xiang (2008) The Roughness Measurement and Assessment of the Super-smooth Surface of Hard Disks. Key Engineering Materials, 364-36. pp. 1174-1179. ISSN 1013-9826

Yang, Shuming, Jiang, Xiang, Maxwell, Graeme and Wang, Kaiwei (2008) An integrated optical coupler used in a fibre interferometry system for on-line surface measurements. Optics Communications, 281 (5). pp. 1099-1107. ISSN 0030-4018

Yao, Shaowen, Barrans, Simon and Blunt, Liam (2008) Incompressible and Analytical Study on a Basic Model of Out-Pump Type Complex Journal Gas Bearings. Key Engineering Materials, 381-38. pp. 153-156. ISSN 1013-9826

Yeung, Ka Yiu and Chen, Xun (2010) 3-D Fixture Layout Design System Based on Genetic Algorithm. Proceedings of the 16th International conference on Automation & Computing. pp. 238-243. ISSN 9780955529368

Yin, C., Lin, D., Liu, Z. and Jiang, Xiang (2006) New advance in confocal microscopy. Measurement Science and Technology, 17 (3). pp. 596-600. ISSN 0957-0233

Yu, G., Li, H. and Walker, D.D. (2011) Removal of Mid Spatial-Frequency Features in Mirror Segments. Journal of the European Optical Society: Rapid Publications, 6 (ARTN 1). ISSN 1990-2573

Yu, G., Walker, D.D. and Li, H. (2012) Implementing a grolishing process in Zeeko IRP machines. Applied Optics, 51 (27). pp. 6637-6640. ISSN 1559-128X

Yu, G., Walker, D.D. and Li, H. (2012) Research on fabrication of mirror segments for E-ELT. Proceedings of SPIE, 8416. ISSN 0277-786X

Zeng, Wenhan, Jiang, Xiang and Blunt, Liam (2009) Surface Characterisation Based Tool Wear Monitoring in Peripheral milling. International Journal of Advanced Manufacturing Technology, 40 (3). pp. 226-233. ISSN 0268-3768

Zeng, Wenhan, Jiang, Xiang, Gao, Y. and Xie, T. (2005) Texture extraction and identification of 3D engineering surfaces. Key Engineering Materials, 295-29. pp. 453-458. ISSN 1013-9826

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2005) Complex ridgelets for the extraction of morphological features on engineering surfaces. Journal Paper of Physics: Conference Series, 13. pp. 246-249. ISSN 1742-6588

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2010) Fast algorithm of the Robust Gaussian Regression Filter for Areal Surface Analysis. Measurement Science and Technology, 21 (5). 055108. ISSN 0957-0233

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2011) A Generalised Linear and Nonlinear Spline filter. Wear, 271 (3/4). pp. 544-547. ISSN 0043-1648

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2005) Metrological characteristics of dual-tree complex wavelet transform for surface analysis. Measurement Science and Technology, 16 (7). pp. 1410-1417. ISSN 0957-0233

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2011) Roundness filtration by using robust regression filter. Measurement Science and Technology, 22 (3). 035108. ISSN 0957-0233

Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2008) Investigation on the noise separation in watt balance experiments. Key Engineering Materials, 381-38. pp. 619-622. ISSN 1013-9826

Zeng, Wenhan, Jiang, Xiang, Smith, I and Scott, Paul J. (2010) Transient Signal Separation in Watt Balance Experiments. Physics Letters A, 374 (11-12). pp. 1301-1306. ISSN 0375-9601

Zhang, Hao, Shi, Zhanqun, Gu, Fengshou and Ball, Andrew (2011) Modelling of Outer and Inner Film Oil Pressure for Floating Ring Bearing Clearance in Turbochargers. Journal of Physics: Conference Series, 305 (1). 012021. ISSN 1742-6596

Zhang, Hongyu, Blunt, Liam, Jiang, Xiang, Brown, Leigh, Barrans, Simon and Zhao, Y. (2008) Femoral stem wear in cemented total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 222 (5). pp. 583-592. ISSN 0954-4119

Zhang, Hongyu, Blunt, Liam, Jiang, Xiang, Fleming, Leigh and Barrans, Simon (2012) The influence of bone cement type on production of fretting wear on the femoral stem surface: A preliminary study. Clinical Biomechanics, 27 (7). pp. 666-672. ISSN 0268-0033

Zhang, Hongyu, Brown, Leigh and Blunt, Liam (2008) Static shear strength between polished stem and seven commercial acrylic bone cements. Journal of Materials Science Materials in Medicine, 19 (2). pp. 591-599. ISSN 0957-4530

Zhang, Hongyu, Brown, Leigh, Blunt, Liam and Barrans, Simon (2008) Influence of femoral stem surface finish on the apparent static shear strength at the stem–cement interface. Journal of Mechanical Behaviour of Biomedical Materials, 1 (1). pp. 96-104. ISSN 1751-6161

Zhang, Hongyu, Brown, Leigh, Blunt, Liam, Jiang, Xiang and Barrans, Simon (2008) Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacement. Wear, 266 (5-6). pp. 566-569. ISSN 0043-1648

Zhang, Po, Lu, Wenlong, Liu, Xiaojun, Zhai, Wenzheng, Zhou, Mingzhuo and Zeng, Wenhan (2018) Torsional fretting and torsional sliding wear behaviors of CuNiAl against 42CrMo4 under dry condition. Tribology International, 118. pp. 11-19. ISSN 0301-679X

Zhang, X B, Lu, H, Jiang, Xiang and Li, Z. (2005) A straightness error measurement method matched new generation GPS. Journal of Physics: conference series, 13. pp. 402-405. ISSN 1742-6596

Zhang, Xiangchao and Jiang, Xiang (2008) Numerical analyses of the boundary effect of radial basis functions in 3D surface reconstruction. Numerical Algorithms, 47 (4). pp. 327-339. ISSN 1017-1398

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2009) A new free-form surface fitting method for precision coordinate metrology. Wear, 266 (5-6). pp. 543-547. ISSN 0043-1648

Zhao, Ping, Gao, Nan, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2018) Performance analysis and evaluation of direct phase measuring deflectometry. Optics and lasers in engineering, 103. pp. 24-33. ISSN 0143-8166

Öpöz, Tahsin Tecelli and Chen, Xun (2012) Experimental investigation of material removal mechanism in single grit grinding. International Journal of Machine Tools and Manufacture, 63. pp. 32-40. ISSN 08906955

Öpöz, Tahsin Tecelli and Chen, Xun (2011) Influential Parameters in Determination of Chip Shape in High Speed Machining. Key Engineering Materials, 496. pp. 211-216. ISSN 1013-9826

Book Chapter

Abdulshahed, Ali, Longstaff, Andrew P. and Fletcher, Simon (2015) A particle swarm optimisation-based Grey prediction model for thermal error compensation on CNC machine tools. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. Euspen, Huddersfield, UK, pp. 369-378. ISBN 978-0-9566790-5-5

Abid, Abdulbasit Z., Gdeisat, Munther A., Burton, David R., Lalor, Michael J., Abdul-Rahman, Hussein S. and Lilley, Francis (2008) Fringe pattern analysis using a one-dimensional modified Morlet continuous wavelet transform. In: Proceedings of SPIE: Optical and Digital Image Processing. SPIE. ISBN 9780819471987

Alabed, Asmaa and Chen, Xun (2009) Development of a knowledge warehouse for grinding. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 99-104. ISBN 9781862180857

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter and Myers, Alan (2007) A high accuracy ultrasound distance measurement system using binary frequency shift-keyed signal and phase detection. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter, Myers, Alan and Briggs, Jack (2008) A multifrequency FM-based ultrasonic system for accuracy 3D measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 9-14. ISBN 978-1-86218-067-3

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Pislaru, Crinela, Myers, Alan and Briggs, Jack (2009) A high accuracy ultrasonic system for measurement of air temperature. In: Proceedings of the 9th International Conference - San Sebastian, Spain, 2009. EUSPEN, pp. 134-137. ISBN 978-0-9553082-6-0

Alseddiqi, Mohamed, Mishra, Rakesh and Pislaru, Crinela (2010) Design and Development of an On-Line Work-Based Learning (WBL) Module to Enhance the Technical and Vocational Education (TVE) System in Bahrain. In: Global Learn Asia Pacific 2010: Global Conference on Learning and Technology. Association for the Advancement of Computing in Education (AACE), Vancouver, Canada, p. 1168. ISBN 1-880094-79-7

Alseddiqi, Mohamed, Mishra, Rakesh and Pislaru, Crinela (2009) Identification of skills gap between school-based learning and work-based learning in technical and vocational education in Bahrain. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, UK, pp. 118-123. ISBN 9781862180857

Alzarok, Hamza, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2015) Investigation of a new method for improving image resolution for camera tracking applications. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 40-50. ISBN 978-0-9566790-5-5

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Dynamic simulation of a roller rig. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 51-56. ISBN 978-1-86218-106-9

Arief, Ikhwan and Chen, Xun (2010) Key Parameters In Loose Abrasive Machining. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 1-5. ISBN 9781862180932

Ashari, Djoni, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Artificial intelligence-based condition monitoring for practical electrical drives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 143. ISBN 978-1-86218-106-9

Barrans, Simon and Bhat, N. (2003) Design of flat bed aerostatic bearings with the aid of finite element analysis. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 361-370. ISBN 9781853129902

Barrans, Simon, Ghurbal, E.M. and Freeman, R. (2003) Design optimization of the head of a high precision polishing machine. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 325-334. ISBN 9781853129902

Blunt, Liam (2007) The role of Tribology and Metrology in the Latest Development of Bio-materials. In: Proceedings of the European Conference on Tribology (ECOTRIB). Slovensko društvo za tribologijo, Ljubljana, Slovenia, pp. 465-482.

Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2003) Future developments in surface metrology. In: Advanced Techniques for Assessment Surface Topography. Kogan Page, London, pp. 339-347. ISBN 1903996112

Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2007) A New Approach to Surface Metrology - Structured Surfaces. In: Proceedings of the 7th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen) - Bremen, Germany, 2007. euspen, Bremen, pp. 254-257. ISBN 978-0-9553082-2-2

Blunt, Liam and Rosen, B-G (2001) Topography instrumentation. In: Metrology and Properties of Engineering Surfaces. Springer, London, UK, pp. 83-112. ISBN 978-0-412-80640-7

Borisov, Oleg, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2010) Efficient Machine Error Measurement. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932

Brennan, James K., Jiang, Xiang, Crampton, Andrew and Leach, Richard K. (2006) Propagation of measurement uncertainty for surface texture parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Chen, Xun (2008) Machining Dynamics in Grinding Processes. In: Machining Dynamics: Fundamentals, Applications and Practices. Springer Series in Advanced Manufacturing . Springer, London, pp. 233-262. ISBN 978-1-84628-367-3

Clough, David A, Fletcher, Simon and Longstaff, Andrew P. (2010) Non-contact measurement and analysis of machine tool spindles. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 189. ISBN 9781862180932

Crampton, Andrew and Forbes, Alistair B. (2006) Spline approximation using knot density functions. In: Algorithms for Approximation. Springer, London, pp. 249-258. ISBN 978-3-540-33283-1

Cunningham, J., Xu, Qiang and Ford, Derek G. (2002) A case study on practical error correction practices utilised on a CNC machine tool. In: Advances in Manufacturing Technology XVI. Wiley, pp. 361-366. ISBN 9781860583780

Ding, Hao and Scott, Paul J. (2012) Structure of Mathematical Morphology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 20-24. ISBN 978-1-86218-106-9

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh, Sweeney, Francis and Robbins, David (2014) Defect Detection in Thin-film Photovoltaics; Towards Improved Efficiency and Longevity. In: 5th International Renewable Energy Congress. IREC 2014 . IEEE, Hammamet, Tunisia, pp. 524-528. ISBN 978-1-4799-2196-6

Fletcher, Simon and Ford, Derek G. (2003) Measuring and modelling heat transfer and thermal errors on a ballscrew feed drive system. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 349-360. ISBN 9781853129902

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2005) Compensation of thermal errors on a small vertical milling machine. In: Proceedings of the 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. European Society for Precision Engineering and Nanotechnology, pp. 432-441. ISBN 1861941188

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2009) Defining and Computing Machine Tool Accuracy. In: Laser Metrology and Machine Performance. Euspen Ltd, Euspen Headquarters, Cranfield University, pp. 77-86. ISBN 978-0-9553082-7-7

Fletcher, Simon, Postlethwaite, S. R. and Ford, Derek G. (2001) Volumetric compensation through the machine controller. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 321-330. ISBN 9781853128905

Ford, Derek G. (2003) Machine tool performance: past and present research contributions from the Centre for Precision Technologies. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 403-419. ISBN 9781853129902

Ford, Derek G., Pislaru, Crinela and Freeman, J.M. (2001) Improving CNC machine tools performance by using modular approach. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 301-312. ISBN 9781853128905

Freeman, J.M. and Ford, Derek G. (2001) The reconstruction of cyclically perturbed signals from aliased data. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 313-320. ISBN 9781853128905

Freeman, J.M., Longstaff, Andrew P. and Ford, Derek G. (2003) A general data logger for the measurement of the dynamics and the parameter estimation of machine tools. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 569-578. ISBN 9781853129902

Freeman, J.M., White, A.J. and Ford, Derek G. (2001) Ball-screw thermal errors - a finite element simulation for on-line estimation. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 269-278. ISBN 9781853128905

Gao, Feng (2017) Interferometry for Online/In-Process Surface Inspection. In: Optical Interferometry. InTech, Rijeka, Croatia, pp. 41-60. ISBN 978-953-51-2955-4

Gao, F., Petzing, J, Coupland, J. M. and Leach, Richard K. (2007) Measurement of structured surface using stylus, AFM and optical methods. In: Metrology and properties of engineering surfaces: proceedings of the 11th international conference, Huddersfield, on 17th-20th July 2007. University of Huddersfield, Huddersfield, UK, p. 363. ISBN 1862180571

Gao, F., Wang, Kaiwei and Jiang, Xiang (2009) A high speed scanning heterodyne interferometer for in process surface measurement. In: Proceedings of the euspen International Conference – San Sebastian - June 2009. European Society for Precision Engineering & Nanotechnology, San Sebastian, Spain. ISBN 13:978-0-9553082-6-0

Griffin, J, Limchimchol, Thitikorn and Chen, Xun (2006) Multivariable classification of grinding burn and chatter. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International. ISBN 9780953389094

Griffin, James Marcus and Chen, Xun (2005) Investigation of grinding burn through various extracted sensory information. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 263-268. ISBN 9780953389087

Guo, Li, Li, Bo and Chen, Xun (2007) Grinding temperature in high efficiency deep grinding of engineering ceramics. In: Proceedings of the 13th International Conference on Automation and Computing. Pacilantic International. ISBN 9780955529313

Haase, Frerk, Lockwood, S. and Ford, Derek G. (2003) Active vibration control of machine tool structures - Part 2: an experimental active-vibration control system. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 451-460. ISBN 9781853129902

Hassan, Mothana A., Jiang, Xiang and Martin, Haydn (2012) Comparison of the fringe visibility created by zero and first order diffracted beams in a dispersive interferometer. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 110-115. ISBN 978-1-86218-106-9

Hassan, Mothana A., Martin, Haydn and Jiang, Xiang (2015) A single-shot line-scanning spatially dispersed short coherence interferometer using Fourier transform profilometry. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK. ISBN 978-0-9566790-5-5

Hasse, F., Lockwood, S. and Ford, Derek G. (2001) Vibration modelling of machine tool structures. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 137-146. ISBN 9781853128905

Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2001) Identification of damping elements in CNC machine tool drive. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 289-299. ISBN 9781853128905

Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2003) Modelling the dynamic behaviour of a ball-screw system taking into account the changing position of the ball-screw nut. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 337-347. ISBN 9781853129902

Jenkinson, D.P., Crampton, Andrew, Mason, John C., Cox, M.G., Forbes, Alistair B. and Boudjemae, R. (2004) Parameterised approximation estimators for mixed noise distributions. In: Advanced Mathematical & Computational Tools In Metrology Vi. Series on Advances in Mathematics for Applied Sciences, 66 . World Scientific, pp. 67-81. ISBN 978-981-238-904-6

Jiang, Xiang (2007) Foreword. In: Theory and Methodology of GPS. Cheung Kong Scholars Series . Higher Education Press, Beijing. ISBN 978-7-04-022489-4

Jiang, Xiang and Blunt, Liam (2001) Advances in surface analysis technology. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 247-258. ISBN 9781853128905

Jiang, Xiang and Blunt, Liam (2003) Surface analysis techniques to optimise the performance of CNC machine tools. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 107-117. ISBN 9781853129902

Jiang, Xiang, Gao, F. and Mateboer, A. (2010) An approach of assessment for ultra-precision V-groove structured surfaces. In: Proceedings of the euspen International Conference – Delft - June 2010. European Society for Precision Engineering & Nanotechnology, Delft, Netherlands.

Jiang, Xiang, Martin, Haydn and Wang, Kaiwei (2007) Vibration compensating beam scanning interferometer for surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield.

Kenan, T. and Pislaru, Crinela (2012) Challenges related to e-learning implementation in higher education institutions in Libya. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 151. ISBN 978-1-86218-106-9

Kenan, T. and Pislaru, Crinela (2012) Challenges related to the implementation of e-learning in higher education institutions in Libya. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 116-122. ISBN 978-1-86218-106-9

Kennedy, Allan and Ford, Derek G. (2003) From manual grinding to CNC Automation - a major step forward for the rod mill. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 579-588. ISBN 9781853129902

Kumar, Prashant, Martin, Haydn, Maxwell, G and Jiang, Xiang (2014) Hybrid photonic chip interferometer for embedded metrology. In: Proceedings of SPIE: Integrated Optics: Devices, Materials, and Technologies XVIII. SPIE, California, USA, 89880N.

Kumar, Prashant, Martin, Haydn, Maxwell, Graeme and Jiang, Xiang (2012) Design and Development of a Self Calibrated Optical Chip Interferometer for High Precision On-line Surface Measurement. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 14-19. ISBN 978-1-86218-106-9

Kumar, Prashant, Martin, Haydn, Maxwell, Graeme and Jiang, Xiang (2012) Design and development of a self calibrated optical chip interferometer for high precision on-line surface measurement. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 152. ISBN 978-1-86218-106-9

Lan, Xiangqi, Blunt, Liam and Xiao, Shaojun (2010) Building a Flexible Surface Characterisation System Architecture. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 43-47. ISBN 9781862180932

Lan, Xiangqi, Jiang, Xiang, Blunt, Liam and Xiao, Shaojun (2009) An adaptive system framework for surface characterisation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 142-146. ISBN 9781862180857

Liang, Yingchun, Tong, Zhen, Bai, Qingshun, Chen, Jiaxuan and Wang, Zhiguo (2011) Simulation on tensile mechanical properties of single crystal copper nanostructures with different hole configurations. In: Proceedings of the Third International Conference on Heterogeneous Material Mechanics. DesTech Publications, pp. 132-135. ISBN 978-1-60595-054-9

Limchimchol, Thitikorn, Griffin, James Marcus and Chen, Xun (2006) Multi-class classification of grinding chatter detection using support vector machines. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 217-222. ISBN 9780953389094

Liu, Qiang, Chen, Xun, Cobb, Sue and Eastgate, Richard (2006) Physical behaviours simulation and exact collision detection within VFDAS. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 33-37. ISBN 9780953389094

Liu, Qiang, Chen, Xun, Cobb, Sue and Eastgate, Richard (2005) Virtual reality application in fixture assembly and interactive simulation. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 183-188. ISBN 9780953389087

Liu, X., Bell, T., Gao, F. and Chetwynd, D. G. (2002) Characterisation of engineered surfaces by a multi-function tribological probe microscope. In: EUSPEN International Conference 2002. EUSPEN, pp. 719-722.

Liu, X.W., Cheng, K., Webb, D., Longstaff, Andrew P., Widiyarto, Muhammad Helmi Nur, Jiang, Xiang, Blunt, Liam and Ford, Derek G. (2003) Investigation of the cutting force coefficients in ball-end milling. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 45-54. ISBN 9781853129902

Lockwood, S., Haase, Frerk and Ford, Derek G. (2003) Active vibration control of machine tool structures - Part 1: DSP algorithms. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 441-450. ISBN 9781853129902

Longstaff, Andrew P., Fletcher, Simon and Ford, Derek G. (2003) Practical experience of thermal testing with reference to ISO 230 Part 3. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 473-483. ISBN 9781853129902

Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2005) Volumetric error compensation through a Siemens controller. In: Proceedings of the 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. European Society for Precision Engineering and Nanotechnology, pp. 422-431. ISBN 1861941188

Longstaff, Andrew P., Fletcher, Simon, Poxton, Anthony and Myers, Alan (2009) Comparison of Volumetric Analysis Methods for Machine Tools with Rotary Axes. In: Laser Metrology and Machine Performance. Euspen Ltd, Euspen Headquarters, Cranfield University, pp. 87-96. ISBN 978-0-9553082-7-7

Longstaff, Andrew P., Postlethwaite, S. R. and Ford, Derek G. (2001) Assessment of the volumetric accuracy of a machine with geometric compensation. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 41-50. ISBN 9781853128905

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2010) A Fast Algorithm for Morphological Filters. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 190. ISBN 9781862180932

Martin, Haydn (2006) A self stabilising multiplexed interferometer for on-line surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Martin, Haydn and Jiang, Xiang (2008) Stabilising fibre interferometers. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 75-80. ISBN 978-1-86218-067-3

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2009) Efficient Offline Thermal Modelling for Accurate Assessment of Machine Tool Thermal Behaviour. In: Laser Metrology and Machine Performance. Euspen, Euspen Headquarters, Cranfield University, pp. 9-18. ISBN 978-0-9553082-7-7

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2009) Efficient offline thermal error modelling strategy for accurate thermal behaviour assessment of the machine tool. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 26-32. ISBN 9781862180857

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2008) Novel and efficient thermal error reduction strategy for machine tool performance improvement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 15-22. ISBN 978-1-86218-067-3

Moreno-Castaneda, V.Y., Pislaru, Crinela, Freeman, J.M. and Ford, Derek G. (2003) Modelling and simulation of a feed drive using the transmission line modelling technique. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 193-202. ISBN 9781853129902

Moschetti, Giuseppe, Muhamedsalih, Hussam, Jiang, Xiang, Leach, Richard K. and O'Connor, Daniel (2015) Extending the vertical range of wavelength scanning interferometry. In: Proceedings of the 5th ASPE Topical Meeting on Precision Interferometric Metrology. American Society for Precision Engineering, pp. 50-55. ISBN 978-1-887706-68-1

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2011) Comparison of fast Fourier transform and convolution in wavelength scanning interferometry. In: Proceedings of SPIE Volume 8082. SPIE Optical Metrology, 80820Q-80820Q.

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2009) Interferograms analysis for wavelength scanning interferometer using convolution and fourier transform. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 33-37. ISBN 9781862180857

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2010) Vibration compensation of wavelength scanning interferometer for in-process surface inspection. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 148-153. ISBN 9781862180932

Muller, M and Barrans, Simon (2009) Ultimate axial load capacity of v-band clamp joints. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 14-18. ISBN 9781862180857

Muller, Matthias and Barrans, Simon (2010) Impact of flange geometry on the ultimate axial load capacity of V-band clamps. In: Conference papers: 9th International Conference on Turbochargers and Turbocharging. Institution of Mechanical Engineers, London, pp. 183-192. ISBN 978-1-907599-15-6

Muller, Matthias and Barrans, Simon (2010) Predicting and determining the contact pressure distribution in joints formed by v-band clamps. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 154-159. ISBN 9781862180932

Myers, Alan, Barrans, Simon and Ford, Derek G. (2007) Structural Analysis of a Large Moving Gantry Milling Machine including its Work Support System and Foundation. In: Laser Metrology and Machine Performance VIII. Euspen Ltd, Euspen Headquarters, Cranfield University, pp. 63-72. ISBN 9780955308239

Myers, Alan, Barrans, Simon, Longstaff, Andrew P., Fletcher, Simon and Ford, Derek G. (2009) Evaluation and Comparison of a Large Machine Tool Structure with ISO Standard Alignment Tests. In: Laser Metrology and Machine Performance. Euspen Ltd, euspen headquarters, University of Cranfield, pp. 57-66. ISBN 978-0-9553082-7-7

Myers, Alan, Ford, Derek G. and Xu, Qiang (2003) Finite element analysis of the structural dynamics of a vertical milling machine. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 431-440. ISBN 9781853129902

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Review of control strategies used in modern railway vehicles. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 160. ISBN 978-1-86218-106-9

Oluwajobi, Akinjide O. and Chen, Xun (2009) Cellular automata modelling of micro abrasive machining. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 159-164. ISBN 9781862180857

Oluwajobi, Akinjide O. and Chen, Xun (2010) The Effect of Interatomic Potentials on Nanometric Abrasive Machining. In: Proceedings of the 16th International Conference on Automation & Computing, University of Birmingham, Birmingham, UK, 11 September 2010. Chinese Automation and Computing Society in the UK, pp. 130-135. ISBN 9780955529368

Oluwajobi, Akinjide O. and Chen, Xun (2008) Modelling abrasive machining techniques using molecular dynamics. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 100-105. ISBN 978-1-86218-067-3

Oluwajobi, Akinjide O. and Chen, Xun (2010) On Minimum Depth of Cut in nanomachining. In: Advances in manufacturing technology. Durham University and Glasgow Caledonian University, Durham, pp. 174-179. ISBN 9781905866519

Oluwajobi, Akinjide O. and Chen, Xun (2010) The effect of tool geometry on rubbing and ploughing phenomena in nano abrasive machining. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 160-165. ISBN 9781862180932

Opoz, Tahsin Tecelli and Chen, Xun (2010) Finite element simulation of chip formation. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 166-171. ISBN 9781862180932

Opoz, Tahsin Tecelli and Chen, Xun (2009) Finite element simulation of grinding process and micro-scale abrasive wear. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 165-171. ISBN 9781862180857

Parkinson, S., Longstaff, Andrew P., Crampton, Andrew, Fletcher, Simon, Allen, Gary and Myers, Alan (2012) Automation as a Solution for Machine Tool Calibration Planning. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 57-62. ISBN 978-1-86218-106-9

Parkinson, Simon, Longstaff, Andrew P., Crampton, Andrew and Gregory, Peter (2012) The Application of Automated Planning to Machine Tool Calibration. In: Proceedings of the Twenty-Second International Conference on Automated Planning and Scheduling. ICAPS 2012 . AAAI Press, California, USA, pp. 216-224. ISBN 978-1-57735-562-5

Parkinson, Simon, Longstaff, Andrew P., Fletcher, Simon, Allen, Gary, Crampton, Andrew and Myers, Alan (2010) A novel framework for establishing a machine tool quality metric. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932

Perkins, Chris J, Longstaff, Andrew P., Fletcher, Simon, Willoughby, P and Verma, Rocky (2010) Limitations of Data Handling within the Machine Tool Service environment. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 192. ISBN 9781862180932

Pislaru, Crinela, Ford, Derek G. and Freeman, J.M. (2003) Identification of modal parameters affecting the dynamic performance of CNC machine tools. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 161-170. ISBN 9781853129902

Pislaru, Crinela, Ford, Derek G. and Myers, Alan (2009) Novel condition monitoring technique used for improved CNC machine tool performance. In: Laser metrology and machine performance IX. Euspen, pp. 176-186. ISBN 9780955308277

Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, Simon and Pislaru, Crinela (2008) Simulation of the structural elements of a three axis VMC for machine tool error compensation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 23-27. ISBN 978-1-86218-067-3

Qi, Qufen, Blunt, Liam, Scott, Paul J. and Jiang, Xiang (2010) Modeling of the concepts in ISO standards for profile surface texture. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 172-176. ISBN 9781862180932

Qi, Qufen, Jiang, Xiang, Scott, Paul J. and Lu, Wenlong (2012) Model for a CAD-assisted designing process with focus on the definition of the surface texture specifications and quality. In: Proceedings of the 37th International MATADOR Conference. Springer, Manchester, UK, pp. 273-276. ISBN 978-1-4471-4479-3

Radhi, H.E. and Barrans, Simon (2012) Comparison between multiobjective optimization algorithms. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 129-135. ISBN 978-1-86218-106-9

Radhi, H.E. and Barrans, Simon (2012) Comparison between multiobjective optimization algorithms. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9

Radhi, H.E. and Barrans, Simon (2010) Finite Element Analysis of Effect of Weld Toe Radius and Plate Thickness on Fatigue Life of Butt Welded Joint. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 60-64. ISBN 9781862180932

Ren, Hongyu, Jiang, Xiangqian, Gao, Feng and Zhang, Zonghua (2014) Absolute height measurement of specular surfaces with modified active fringe reflection photogrammetry. In: Interferometry XVII: Advanced Applications. Proceedings of SPIE, 9204 (9204). SPIE, San Diego, California, USA, 920408-1-920408-8. ISBN 9781628412314

Scott, Paul J. (2003) Novel areal characterisation techniques. In: Advanced Techniques for Assessment surface topography. Kogan Page, London, pp. 43-61. ISBN 1903996112

Scott, Paul J. (2004) An application of surface networks in surface texture. In: Topological Data Structures for Surfaces. Wiley. ISBN 9780470851517

Scott, Paul J., Jiang, Xiang and Blunt, Liam (2002) An overview of the relationship between approximation theory and filtration. In: Algorithms for approximation IV : the proceedings of the Fourth International Symposium on Algorithms for Approximation, held at the University of Huddersfield, July 2001. University of Huddersfield, Huddersfield, pp. 188-196. ISBN 1862180407

Shagluf, Abubaker, Longstaff, Andrew P. and Fletcher, Simon (2014) Maintenance Strategies to Reduce Downtime Due to Machine Positional Errors. In: Proceedings of Maintenance Performance Measurement and Management. MPMM 2014 . Department of Mechanical Engineering Pólo II · FCTUC, Coimbra, Portugal, pp. 111-118. ISBN 978-972-8954-42-0

Shagluf, Abubaker, Parkinson, Simon, Longstaff, Andrew P. and Fletcher, Simon (2014) Towards an Optimization Calculation for Preventative and Reactive Calibration Strategies. In: SDM'2014 International Conference on Sustainable Design and Manufacturing Cardiff, Wales, UK 28-30 April 2014. Sustainable Design and Manufacturing 2014 . KES International, Cardiff, UK, pp. 83-94. ISBN 978-0-9561516-9-8

Su, Yang, Xu, Zhijie and Jiang, Xiang (2008) GPGPU-based Gaussian Filtering for Surface Metrological Data Processing. In: Information Visualisation, 2008. IV apos;08. 12th International Conference. Information Visualisation, 2008. IV apos;08. 12th International Conference, pp. 94-99.

Su, Yang, Xu, Zhijie and Jiang, Xiang (2008) Stream-Based Data Filtering for Accelerating Metrological Data Characterization. In: Proceedings of the 14th International Conference on Automation and Computing. ICAC, pp. 81-85. ISBN 978-0-9555294-2-0

Su, Yang, Xu, Zhijie, Jiang, Xiang and Pickering, Jonathan (2008) Discrete wavelet transform on consumer-level graphics processing unit. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 40-47. ISBN 978-1-86218-067-3

Sun, D, Chen, Xun, Du, F, Yang, X, Zhang, J and Zhang, X (2005) Temperature simulation of 2050 rough rolling process. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 43-48. ISBN 9780953389087

Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Myers, Alan, Fletcher, Simon and Ford, Derek G. (2012) Analysis of complex interactions between mechanical elements using ansys and simulink. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 136-141. ISBN 978-1-86218-106-9

Tian, J and Chen, Xun (2005) Multi-model reasoning medical diagnosis system integrated with probabilistic reasoning. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 79-84. ISBN 9780953389087

Tong, Zhen, Luo, Xichun and Sun, Jining (2014) Investigation of a scale-up manufacturing approach for nanostructures using multi-tip nanoscale diamond tool. In: Proceedings of the 14 th international conference of the european society for precision engineering and nanotechnology. Euspen, pp. 347-350. ISBN 9780956679031

Walker, D.D. (1993) Optical Instruments - Where We Go From Here. In: Optics in Astronomy. Cambridge University Press.

Walker, David D. (1988) Overall Philosophy of the Echelle Spectrographs for the Anglo-Australian Telescope and William Herschel Telescope. In: Instrumentation for Ground-Based Optical Astronomy. Present and Future The Ninth Santa Cruz Summer Workshop in Astronomy and Astrophysics, July 13–July 24, 1987, Lick Observatory . Springer, New York, USA, pp. 21-32. ISBN 978-1-4612-8387-4

Walker, David D., Yu, G. and Li, H. (2011) Research in new polishing techniques for off-axis mirror segments. In: Proceedings of: The Twenty-sixth Annual Meeting of The American Society for Precision Engineering. ASPE, 52 (2011). American Society for Precision Engineering, Denver Marriott City Center Hotel Denver, Colorado, pp. 31-34. ISBN 9781887706582

Wang, J, Jiang, Xiang and Blunt, Liam (2009) A survey of potential sampling strategies for measurement of structured surfaces. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 184-189. ISBN 9781862180857

Wang, Jian, Jiang, Xiang and Blunt, Liam (2010) Simulation of Adaptive Sampling in Profile Measurement for Structured Surfaces. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 48-53. ISBN 9781862180932

Wang, Kaiwei, Jiang, Xiang, Martin, Haydn and Blunt, Liam (2007) Light-beam scanning interferometry for on-line ultra precision surface measurement. In: 7th International Conference of the European Society for Precision Engineering and Nanotechnology 2007. Proceedings. Euspen, Bedford, pp. 302-305. ISBN 978-0-9553082-2-2

Wang, X. and Morrish, L. (2003) Worm gear meshing stiffness calculations based on experiments. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 371-379. ISBN 9781853129902

Wang, Yan, Scott, Paul J. and Jiang, Xiang (2006) Category model to modeling the surface texture knowledge-base. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-7.

White, A.J., Postlethwaite, S. R. and Ford, Derek G. (2001) Measuring and modelling thermal distortion on CNC machine tools. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 69-79. ISBN 9781853128905

White, A.J., Postlethwaite, S. R. and Ford, Derek G. (2001) A general purpose thermal error compensation system for CNC machine tools. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 3-13. ISBN 9781853128905

Widiyarto, Muhammad Helmi Nur, Ford, Derek G. and Pislaru, Crinela (2003) Evaluating the structural dynamics of a vertical milling machine. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 421-430. ISBN 9781853129902

Widiyarto, Muhammad Helmi Nur, Pislaru, Crinela, Ford, Derek G., Longstaff, Andrew P. and Myers, Alan (2005) Hybrid modelling technique applied to digital feed drives. In: Proceedings of the 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. European Society for Precision Engineering and Nanotechnology, pp. 454-463. ISBN 1861941188

Wilkinson, Adam, Chen, Xun and Blunt, Liam (2010) Experimentation to Reduce Friction from Novel Abrasive Tape Polishing Method. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 54-59. ISBN 9781862180932

Willoughby, P, Verma, M, Longstaff, Andrew P. and Fletcher, Simon (2010) A Holistic Approach to Quantifying and Controlling the Accuracy, Performance and Availability of Machine Tools. In: Proceedings of the 36th International MATADOR Conference. Springer, London, UK, pp. 313-316. ISBN 978-1-84996-431-9

Wright, Daniel, Murgatroyd, S., Longstaff, Andrew P., Myers, Alan and Fletcher, Simon (2010) Process control within an SME to increase output and achieve consistent manufacture of components. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932

Xiao, Shaojun, Jiang, Xiang and Blunt, Liam (2001) Multi-Scalar features extraction for the bioengineering nanoscalar surfaces on the basis of the wavelet analysis. In: Proceedings of the Fifth International Symposium on Measurement Technology and Intelligent Instruments ISMTII 2001. National Institute of Standards, pp. 153-159.

Xu, Qiang, Cunningham, J. and Ford, Derek G. (2002) The improvement of geometric accuracy of FMS machine through retrofitting and compensation. In: Advances in Manufacturing Technology XVI: Proceedings of the Eighteenth National Conference on Manufacturing Research, Leeds Metropolitan University, UK, 10-12 September 2002. John Wiley and Sons, pp. 441-448. ISBN 9781860583780

Xu, Qiang and Ford, Derek G. (2002) Analytical and FE Identification of lowest natural frequency of a ball-screw drive in beaver machine. In: Advances in Manufacturing Technology XVI: Proceedings of the Eighteenth National Conference on Manufacturing Research, Leeds Metropolitan University, UK, 10-12 September 2002. John Wiley and Sons, pp. 247-251. ISBN 9781860583780

Xu, Qiang, Miller, B. and Ford, Derek G. (2003) A review of the fundamentals of the finite element simulation of metal cutting. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 391-399. ISBN 9781853129902

Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2007) Exploration of a Category Theory-Based Object-Oriented Database for Surface Texture Information Management. In: Proceedings of the First International Symposium on Data, Privacy, and E-Commerce November 1-3, 2007. IEEE Computer Society, London, UK, pp. 107-109. ISBN 978-0-7695-3016-1

Xu, Yuanping, Xu, Zhijie, Jiang, Xiang, Scott, Paul J. and Pickering, Jonathan (2008) Evaluation on the categorical DBMS for the VirtualGPS knowledge system. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 81-86. ISBN 978-1-86218-067-3

Yang, Shuming and Jiang, Xiang (2007) The beam propagation method used for the design of an integrated optical coupler. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Yang, Shuming and Jiang, Xiang (2006) The roughness measurement of the super-smooth surface of hard disks. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-7.

Yeung, Ka Yiu and Chen, Xun (2006) 2D freeform component fixture design optimisation using genetic algorithm. In: Advances in Manufacturing Technology XX: Proceedings of the 4th International Conference on Manufacturing Research (ICMR2006). BPR, pp. 131-136. ISBN 9780955321504

Yeung, Ka Yiu and Chen, Xun (2007) 3D freeform component fixture design optisation using a genetic algorithm. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Yeung, Ka Yiu and Chen, Xun (2005) Automated fixture error minimisation using genetic algorithm. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 67-72. ISBN 9780953389087

Yeung, Ka Yiu and Chen, Xun (2006) Web based approach for fixture design. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 171-175. ISBN 9780953389094

Zeng, S., Blunt, Liam and Jiang, Xiang (2012) Material removal investigation in bonnet polishing of CoCr alloy. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 25-30. ISBN 978-1-86218-106-9

Zeng, Shengye, Blunt, Liam, Jiang, Xiang and Bills, Paul J. (2010) Investigation of the material removal characteristic for polishing CoCr alloy. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 177-182. ISBN 9781862180932

Zeng, Wenhan, Jiang, Xiang, Scott, Paul J., Xiao, Shaojun and Blunt, Liam (2009) A Fast Algorithm for the High Order Linear and Nonlinear Gaussian Regression filter. In: Proceedings of the 9 th international conference of the european society for precision engineering and nanotechnology. euspen, San Sebastian, Spain, pp. 356-359. ISBN 978-0-9553082-6-0

Zhang, H., Brown, L. and Blunt, Liam (2006) Investigation of characteristics at the stem cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2007) Generation of fretting wear debris at the stem-cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-4.

Zhang, X., Jiang, Xiang and Crampton, Andrew (2007) Numerical Analysis of the Boundary Effect of Radial Basis Functions in 3D Surface Reconstruction. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Zhu, Hao, Blunt, Liam and Jiang, Xiang (2009) Flexible shape extraction for micro/nano scale structured surfaces. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 190-194. ISBN 9781862180857

Zhu, Hao, Xiao, Shaojun, Jiang, Xiang and Blunt, Liam (2008) MEMS microstructured surface characterisation based on wavelet transform techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 87-92. ISBN 978-1-86218-067-3

Ziao, S. J., Jiang, Xiang and Blunt, Liam (2000) Three-dimensional functional parameters for characterization of the bio-engineering surface at different stages of wear. In: 1st International Conference on Tribology in Environmental Design 2000 - The Characteristics of Interacting Surfaces. Professional Engineering Publishing, London, UK, pp. 155-161. ISBN 1-86058-266-4

Monograph

Li, T., Leach, Richard K., Jung, L, Jiang, Xiang and Blunt, Liam (2009) Comparison of Type F2 Software Measurement Standards for Surface Texture. Technical Report. National Physical Laboratory, UK, London, UK.

Unver, Ertu, Taylor, Andrew and Ball, Andrew (2016) Comparative Analysis of Mobile 3D Scanning Technologies for Design, Manufacture of Interior and Exterior Tensile Material Structures and Canvasman Ltd. Case Study. Technical Report. CANVASMAN, Otley, West Yorkshire,. (Submitted)

Conference or Workshop Item

Abusaad, Samieh, Benghozzi, Ahmed, Brethee, Khaldoon F., Gu, Fengshou and Ball, Andrew (2014) Investigating the Effect of Water Contamination on Gearbox Lubrication based upon Motor Control Data from a Sensorless Drive. In: 3rd International Workshop and Congress on eMaintenance, 17th - 18th June 2014, Lulea, Sweden.

Alabed, Asmaa and Chen, Xun (2008) Grinding knowledge sharing through a knowledge warehouse development. In: 6th International Conference on Manufacturing Research (ICMR 2008), 9th - 11th September 2008, Brunel University, London, UK. (Unpublished)

Alabed, Asmaa and Chen, Xun (2009) Web-Based Knowledge Warehouse Development 2. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter and Myers, Alan (2008) A Low Cost Ultrasonic 3D Measurement Device for Calibration for Cartesian and Non-Cartesian Machines. In: Third International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics ISEM 2008, 7th - 10th December 2008, National Cheng Kung University, Tainan, Taiwan. (Unpublished)

Arif, Mohammed, Folkes, Janet and Chen, Xun (2010) Detection of High and Low Temperature in the Grinding Zone using Laser Irradiation Technique. In: 36th International MATADOR Conference 2010, 14th - 16th July 2010, Manchester, UK. (Unpublished)

Ashari, Djoni, Lane, Mark, Gu, Fengshou and Ball, Andrew (2014) Detection and Diagnosis of Broken Rotor Bar Based on the Analysis of Signals from a Variable Speed Drive. In: 3rd International Workshop and Congress on eMaintenance, 17th - 18th June 2014, Lulea, Sweden.

Barrans, Simon and Bhat, N. (2005) Optimization of Flat PAD Bearings with the aid of Finite Element Analysis. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Bills, Paul J., Blunt, Liam and Jiang, Xiang (2006) A metrology solution for determination of form deviation and wear in orthopaedic joint replacements. In: 33rd Leeds-Lyon Symposium on Tribology, Tuesday 12th - Friday 15th September 2006, Trinity and all Saints College, Leeds. (Unpublished)

Bills, Paul J. and Cunningham, J.L. (2009) Determination of clinical wear in retrieved total hip replacement joints using shadowgraph and co-ordinate measurement methods. In: Internatiional Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco. (Unpublished)

Blunt, Liam (2006) Metrology of MST and microfluidic devices using white light interferometery and novel surface metrology characterisation. In: Micro and Nano Technology (MNT) Measurement Club, 1-day meeting, The Measurement and Characterisation of MST Devices (MEMS), Monday 27 February 2006, National Physical Laboratory, Hampton Road, Teddington, Middlesex TW11 0LW. (Unpublished)

Blunt, Liam (2007) Next Generation Surface Metrology: Structured and Freeform Surfaces. In: Asia Pacific Conference on Optics Manufacture 2007 (APCOM2007), 11 -13 January 2007, The Hong Kong Polytechnic University. (Unpublished)

Blunt, Liam, Bills, Paul J. and Fleming, Leigh (2015) Metrology for Bio Systems. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, March 2-5 2015, Charlotte, NC, USA. (Submitted)

Blunt, Liam, Elrawemi, Mohamed, Fleming, Leigh, Martin, Haydn, Muhamedsalih, Hussam and Robbins, David (2013) Metrology for in process metrology for roll to roll production of flexible photovoltaics. In: Metrology Technologies to Enable Reel to Reel Processing of Emerging Products, November 20, 2013, National Physical Laboratory , Teddington, Middlesex, UK.. (Unpublished)

Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2003) Advances in micro and nano-scale surface metrology. In: ISMTII 2003, The Sixth International Symposium on Measurement Technology and Intelligent Instruments, 28 November - 1 December 2003, Academic Building, Hong Kong University of Science and Technology, Kowloon, Hong Kong.

Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2009) Precision and Nanoscale Surface Metrology. In: International Moulded Optics Conference,, 19-20th Nov 2009, Breman Germany. (Unpublished)

Blunt, Liam, Jiang, Xiang, Xiao, Shaojun and Scott, Paul J. (2004) The use of interferometry and image analysis techniques for metrology of MST devices. In: 8th International Symposium on Measurement and Quality Control in Production, 12th-15th October, 2004, Erlangen, Germany. (Unpublished)

Blunt, Liam, Leach, Richard K., Scott, Paul J., Harris, Peter M., Xiao, Shaojun, Li, T., Parkin, G. and Jiang, Xiang (2005) Development of “softgauges” for surface profile metrology. In: 5th Euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Blunt, Liam, Xiao, Shaojun, Jiang, Xiang and Scott, Paul J. (2005) Geometrical characterisation of MST and microfluidic devices using novel surface metrology techniques. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Blunt, Liam, Zhang, H., Barrans, Simon and Brown, L. (2008) The Relative Contribution of Micropores and Shrinkage Bumps on Cement Surface to Fretting Wear on polished Stems. In: 35th Leeds-Lyon Symposium on Tribology, 9th-12th September 2008, Leeds. (Submitted)

Bracken, C., O'Sulllvan, C., Donohoe, A., Murphy, A., Savini, G., Juanola-Parramon, R., Baccichet, N., Guisseau, A., Ade, P., Pascale, E., Spencer, L., Walker, I., Dohlen, K., Lightfoot, J., Holland, W., Jones, M., Walker, D.D. and McMillan, A. (2015) Optical and Quasi-Optical Analysis of System Components for a Far-Infrared Space Interferometer. In: UNSPECIFIED.

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Approximation of surface roughness profiles and parameters. In: International Conference on Advanced Mathematical and Computational Tools in Metrology (AMCTM 2005), 27–29 June, 2005, Instituto Português da Qualidade, Caparica, Portugal. (Unpublished)

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Reconstruction of continuous surface profiles from discretely sampled data. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Brennan, James K., Mason, John C., Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2004) Approximation of surface texture profiles and parameters. In: 4th International Conference of the European Society for Precision Engineering and Nanotechnology, euspen, 30th May - 3rd June 2004, Scottish Exhibition and Conference Centre (SECC), Glasgow. (Unpublished)

Brown, L. and Blunt, Liam (2008) Surface Metrology for the Automotive Industry. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Brown, L., Zhang, H. and Blunt, Liam (2009) Investigation of a possible wear mechanism at the cement head interface in hip resurfacing arthroplasty. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco. (Submitted)

Charlton, P. and Blunt, Liam (2006) CNC manufacturing to improve hip and knee joint replacement lifetimes. In: ICMR 2006, 5th - 7th September 2006, Liverpool, UK.

Charlton, P., Blunt, Liam and Beaucamp, A. (2005) Machining of "freeform" biological surfaces on an advanced 7-axis CNC polishing machine. In: International Conference on Precision Machining, ICPM 2005, 2005, Vienna, Austria. (Unpublished)

Chen, Xun and Griffin, James Marcus (2007) The Classification of rubbing, ploughing and cutting during grinding and the comparison of different evolutionary inspired classification techniques. In: 40th CIRP International Seminar on Manufacturing Systems, 30th May - 1st June 2007, Liverpool, UK. (Unpublished)

Chen, Xun and Limchimchol, Thitikorn (2007) Grinding chatter monitoring using least square support vector machine. In: International Symposium on Advances in Abrasive Technology (ISAAT 2007), 26th - 28th Septmeber 2007, Dearborn, Michigan, USA. (Unpublished)

Chen, Xun and Opoz, Tahsin Tecelli (2010) Simulation of Grinding Surface Creation – A Single Grit Approach. In: The 13th International Symposium on Advances in Abrasive Technology (ISAAT 2010), 19-22 September 2010, Taipei, Taiwan.

Feng, Li, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2011) Integrated tactile-optical coordinate measuring system. In: University of Huddersfield Annual Research Festival School of Computing and Engineering, March 2011, University of Huddersfield. (Submitted)

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2005) Flexible modelling and compensation of machine tool thermal errors. In: 20th Annual Meeting of American Society for Precision Engineering, 9th -14th October 2005, Norfolk, VA.

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2007) Measurement methods for efficient thermal assessment and error compensation. In: EUSPEN Topical Meeting "Thermal Effects in Precision Engineering", 3 - 4 December 2007, Maastricht, The Netherlands.

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2005) Practical compensation of all significant thermal errors in machine tools. In: 3rd International Congress on Precision Machining, Vienna, Austria, October 2005, Vienna, Austria.

Fletcher, Simon, Mian, N S and Longstaff, Andrew P. (2014) Optimising temperature sensor placement for machine tool thermal error compensation. In: EUSPEN Special Interest Group: Thermal Issues, 19-20 March 2014, Novotel Zurich City, Zurich, Switzerland. (Unpublished)

Ford, Derek G. (2004) Precision versus volumetric cutting. In: Nonlinear Dynamics and Chaos for High Volume and Ultra Precsion Metal Cutting, 20 - 24 September 2004, International Centre for Mechanical Sciences, Udine, Italy. (Unpublished)

Ford, Derek G., Longstaff, Andrew P., Freeman, J.M. and Postlethwaite, S. R. (1999) Practical calibration of tracking laser systems. In: 4th International Conference on Laser Metroogy and Machine Performance, 13 to 15 July 1999, Longhirst Hall, Northumberland.

Gao, F. (1993) A Reflective Optic Fiber Displacement Sensor. In: Young Scientists Symposium of National Institute of Metrology, 1993, Beijing, China.

Gao, F., Coupland, J. M. and Petzing, J. (2006) V-groove measurement with white light interferometry. In: Photon06, 4-7 September, 2006, Manchester.

Gao, F., Harms, C., Zhao, X. and Koenders, L. (1997) Calibration of Standard Using a Scanning Probe Microscope. In: European Workshop on Micro-technology and Scanning Probe Microscope, 1997, Mainz, Germany.

Gao, F. and Jiang, Xiang (2017) Environmental robust interferometry for online/in-process surface inspection. In: The 2nd International Forum on Surface and Microscopy, 7-9 August 2017, Harbin, China. (Unpublished)

Gao, F., Jiang, Xiang and Blunt, Liam (2009) Automated ballistic and tool mark identification. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Gao, F., Jiang, Xiang, Muhamedsalih, Hussam and Martin, Haydn (2010) Wavelength Scanning Interferometry for Thin Film Analysis of Fusion Target. In: 3rd European Target Fabrication Workshop, 30 September-1 October, Oxford. (Unpublished)

Gao, F. and Liu, X (2000) Development of a new multi-function tribological Microscope. In: 1st euspen Topical Conference on Fabrication and Metrology in Nanotechnology and 2nd Annual General Meeting of euspen, 31 May - 2 June, 2000, Copenhagen, Denmark.

Gao, F. and Liu, X. (2000) A multi-functional tribological probe microscope for surface and surface related properties. In: The euspen nanotechnology workshop and Joint Warwick-Tokyo Nanotechnology Symposium, Sep. 2000, Warwick, UK.

Gao, F., Peng, G., Zhao, X. and Koenders, L. (1997) Calibration of Standards and Application by SPM. In: The 9th International Precision Engineering Seminar, May 1997, Braunschweig, Germany. (Unpublished)

Gao, F., Wang, B. and Zhuang, B. (1987) A Projection Photoelectric 2D Positioning System. In: National Symposium of Opto-Electronic technology, 1987, Jilin, China.

Gao, F., Xu, Yongjia, Ren, Hongyu, Zhang, Zonghua and Jiang, Xiang (2016) A novel camera calibration method for deflectometry system. In: 16th International Conference and Exhibition, 30th May-3rd June 2016, Nottingham, UK.

Griffin, James Marcus and Chen, Xun (2006) Classification of varying levels of ploughing, rubbing and cutting during Single Grit tests using Evolutionary Inspired Computer Techniques. In: 4th International Conference on Manufacturing Research (ICMR 2006), 5th-7th September 2006, Liverpool John Moores University, Liverpool. (Submitted)

Hassan, Mothana A., Martin, Haydn and Jiang, Xiangqian (2013) Surface profile measurement using spatially dispersed short coherence interferometry. In: 11th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII) in Aachen and Braunschweig/Germany, 1-5 July 2013, Aachen and Braunschweig, Germany.

Holroyd, Geoffrey, Fletcher, Simon and Myers, Alan (2005) Modelling the dynamic behaviour of a ballscrew system taking into account the changing position of the ballscrew nut. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Hothi, Harry, Whittaker, Robert, Meswania, Jay, Bills, Paul J., Blunt, Liam, Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, A. J. (2015) Material Loss at the Head Taper Junction of the Metal-on-Metal Pinnacle Total Hip Replacement. In: Orthopaedic Research Society Annual Meeting, March 28-31 2015, Las Vegas, NV, USA. (Submitted)

Ibrahim, S M, Bills, Paul J. and Allport, John (2017) Improving the Capacity of Institutions to strengthen the Management of National Oil and Gas Resources. In: 224th International Academic Conference on Engineering, Technology and Innovations (IACETI), 23-24 August 2017, Mecca, Saudi Arabia.

Jiang, Xiang (2004) Recent advances in micro-manufacturing and micro-system. In: The 6th International Conference on Frontiers of Design and Manufacturing, 20th-24th June, 2004, Xi'an, China. (Unpublished)

Jiang, Xiang (2007) The economic management of geometrical products variability: the next generation GPS. In: 4th International CIRP-Sponsored Conference (DET2007) on Digital Enterprise Technology, 19-21 September 2007, University of Bath, UK. (Unpublished)

Jiang, Xiang (2009) The evolution of surfaces and their measurement. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia. (Unpublished)

Jiang, Xiang, Blunt, Liam and Scott, Paul J. (2002) Fundamental research into the filtration of surface texture in geometric product specification and verification. In: 3rd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering - ICME 2002, 3rd-5th July 2002, Ischia, Italy. (Unpublished)

Jiang, Xiang, Gao, F. and Wang, Kaiwei (2010) Wavelength Scanning Interferometer for Structured Surfaces. In: ASPE Summer Topical Meeting on Precision Interferometric Metrology, 23rd - 25th June 2010, Asheville, North Carolina, USA.

Jiang, Xiang, Gu, Fengshou and Ball, Andrew (2008) Automotive Diesel Engine Performance and Condition Monitoring using Downpipe Acoustic Waveform Analysis. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Jiang, Xiang and Scott, Paul J. (2003) Review of surface texture work in ISO. In: 9th International Conference on Metrology and Properties of Engineering Surfaces, 10th-11th September 2003, Halmstad University, Sweden. (Unpublished)

Joyce, N.J., Fleming, Leigh, Sisodia, Gurudatt, Elnaggar, Mohamed, Chakrabarty, Guatam and Blunt, Liam (2012) Does cementing the tibial keel and peg in a knee replacement affect the pull out strength of the tibial component from the bone - A biomedical study of two cementation techniques. In: EFORT Congress 2012, 23 - 25 May 2012, Berlin. (Unpublished)

Lan, Xiangqi, Jiang, Xiang, Blunt, Liam, Xiao, Shaojun and Xie, Fang (2009) Characterisation Platform For Surface Metrology. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Leach, Richard K., Li, Tukun, Jiang, Xiang and Blunt, Liam (2010) Comparison of commercial software packages for calculating surface texture parameters. In: Proceedings of the euspen International Conference, Monday 31st May - Friday 4th June 2010, Delft, Holland. (Submitted)

Li, T., Blunt, Liam and Jiang, Xiang (2009) Uncertainty In Surface Roughness Measurement. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Li, T., Blunt, Liam, Jiang, Xiang, Scott, Paul J. and Xiao, X. (2007) On the accuracy of roughness parameters. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.

Li, T., Jiang, Xiang, Blunt, Liam, Scott, Paul J. and Xiao, Shaojun (2007) Comparison on F2 softgauges for surface texture. In: 1st European Conference on Tribology (ECOTRIB), June 12-15, 2007, Ljubljana, Slovenia.

Li, T., Jiang, Xiang, Blunt, Liam, Scott, Paul J. and Yao, Shaowen (2007) The Design and Use of F1 Softgauges for Validating Surface Metrology Software. In: The 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2007), 24-27 September 2007, Tohoku University, Sendai, Japan. (Unpublished)

Li, Z. and Jiang, Xiang (2005) An international strategy for China's manufacturing industry and technical standards. In: International Manufacturing Leaders Forum (IMLF 2005), 28th Feb-2nd March 2005, Glenelg Beach, Adelaide, South Australia. (Unpublished)

Lin, D., Jiang, Xiang, Zhang, W., Zhang, L. and Blunt, Liam (2005) Multiplexed fibre interferometer and its application on surface measurement. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Liu, X, Huang, Shujun, Zhang, Zonghua, Gao, Feng and Jiang, Xiang (2016) Full-field calibration and compensation of lateral chromatic aberration based on unwrapped phase. In: SPIE: Optical Metrology and Inspection for Industrial Applications IV, 12-14 October 2016, Beijing, China.

Liu, X-W, Cheng, K., Webb, D., Longstaff, Andrew P., Widiyarto, Muhammad Helmi Nur, Jiang, Xiang, Blunt, Liam and Ford, Derek G. (2003) Prediction and compensation of machining error in ball end milling for microscale curved surface. In: EUSPEN International Topical Conference, 19 - 20 May 2003, Aachen, Germany.

Liu, X. and Gao, F. (2001) Multi-function evaluation of surfaces at micro/nano scales by a new tribological probe microscope. In: 2nd euspen International Conference, 27-31, May 2001, Turin, Italy.

Lobera, L, Gao, F., Petzing, J and Coupland, J. M. (2008) Limitations and Innovations in Scanning White Light Interferometry. In: euspen 10th Anniversary International Conference, 18-22 May 2008, Zurich, Switzerland,.

Longstaff, Andrew P. (2003) CNC machine tool volumetric accuracy performance. In: 6th International LAMDAMAP Conference, 15th - 18th July 2003, University of Huddersfield. (Unpublished)

Longstaff, Andrew P. (2001) Volumetric Accuracy and Compensation. In: 5th International LAMDAMAP Conference, 17 - 20 July 2001, University of Birmingham. (Unpublished)

Longstaff, Andrew P. (2002) An introduction to machine tool testing. In: Dimensional Metrology Awareness Club, Gear Metrology Special Interest Group Meeting, June 2002, David Brown Textron Power Transmissions, Huddersfield. (Unpublished)

Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2007) Flexible compensation of thermal errors. In: EUSPEN Topical Meeting "Thermal Effects in Precision Engineering", 3 - 4 December 2007, Maastricht, The Netherlands.

Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2005) Volumetric compensation for precision manufacture through a standard CNC controller. In: 20th Annual Meeting of the American Society for Precision Engineering, 9th-14th October 2005, Norfolk, VA.

Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2005) Volumetric compensation of machine tools makes geometric errors negligible. In: 3rd International Congress on Precision Machining, October 2005, Vienna, Austria.

Lu, Wenlong, Jiang, Xiang, Scott, Paul J. and Lan, Xiangqi (2009) A Host System for Form Tolerance Specification in the Next-generation GPS based on AutoCAD. In: The 11th CIRP Conference on Computer Aided Tolerancing “Geometric Variations within Product Life-Cycle Management”, 26-27 March 2009, Annecy, France.

Ma, J.W., Jiang, Xiang and Blunt, Liam (2004) Complex wavelet transform for extraction of morphological features on surface topography. In: euspen 4th International Conference, 30th May-3rd June 2004, Glasgow. (Unpublished)

MacEwen, Howard A., Fazio, Giovanni G., Lystrup, Makenzie, Batalha, Natalie, Siegler, Nicholas, Tong, Edward C., Veenendaal, Ian, Naylor, David, Gom, Brad, Gunuganti, Sudhakar, Winter, Calvin, Jones, Martyn and Walker, David D. (2016) Performance of a cryogenic test facility for 4 K interferometer delay line investigations. In: Space Telescopes and Instrumentation 2016, June 26 2016, Edinburgh.

Martin, Haydn (2015) High resolution point-sensing using template matching to extract phase from spectral interferograms. In: Photonex 15: Optical Metrology - Latest developments in instrumentation for industry and research, 14th - 15th October 2015, Coventry, UK. (Submitted)

Martin, Haydn and Jiang, Xiang (2009) Phase Feedback Active Stabilisation Of A Multiplexed Fibre Interferometer. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2009) Novel and Efficient Thermal Error Reduction Strategy For Machine Tool Performance Improvement. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Mishra, Rakesh, Alseddiqi, Mohamed and Pislaru, Crinela (2009) An improved employability skills model and its compliance through vocational educational system. In: Learning: the sixteenth international conference on Learning, 1-4 July 2009, University of Barcelona, Spain. (Unpublished)

Mishra, Rakesh, Barrans, Simon and Pislaru, Crinela (2009) Imparting psychomotor skills to the learners using computer aided instructions in Engineering Education. In: V International Conference on Multimedia and Information and Communication Technologies in Education, 22-24 April 2009, Lisbon, Portugal. (Unpublished)

Moreno-Castaneda, V.Y., Pislaru, Crinela and Ford, Derek G. (2005) Modelling and simulation of the dynamic behaviour of a ball screw system using transmission line modelling technique. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2011) Acceleration computing process in wavelength scanning interferometry. In: 10th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2011), 29th June - 2nd July 2011, Daejeon, S. Korea. (Unpublished)

Muhamedsalih, Hussam, Jiang, Xiang and Wang, Kaiwei (2009) Surface Profile Height Measurement Using Optical Interferometry Method. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Myers, Alan, Ford, Derek G. and Barrans, Simon (2005) Finite element analysis of the static stiffness of a foundation for large machine tool. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Myers, Alan, Pislaru, Crinela, Longstaff, Andrew P. and Fletcher, Simon (2008) Machine Tool Accuracy and Real-Time Control. In: Research Festival - School of Computing and Engineering Research Open Day, Friday 7th March 2008, University of Huddersfield. (Unpublished)

Müller, M. and Blunt, Liam (2009) Predicting The Axial Load Of Capacity Of Joints Formed By V-Band Retainers. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Navarro, Ramón, Walker, D.D., Cunningham, Colin R., Beaucamp, A., Evans, R., Prieto, Eric, Fox-Leonard, T., Fairhurst, N., Gray, C., Hamidi, S., Li, H., Messelink, W., Mitchell, J., Rees, P. and Yu, G. (2012) Edge-control and surface-smoothness in sub-aperture polishing of mirror segments. In: Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II.

Navarro, Ramón, Burge, James H., Yu, Guoyu, Wu, Hsing-Yu, Walker, David D., Zheng, Xiao, Li, Hongyu, Dunn, Christina and Gray, Caroline (2016) Optimisation of grolishing freeform surfaces with rigid and semi-rigid tools. In: Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II Ramón Navarro; James H. Burge, June 26 2016, Edinburgh.

Obi, Stanley (2009) Micro-Touch Detection Using Acoustic Emission Sensor On Inconel 718. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Obi, Stanley, Chen, Xun and Blunt, Liam (2009) Effect of polishing angle on material removal rate and surface finish using bonded abrasive pads. In: Lamdamap 9th International Conference, 30th June – 2nd July 2009, Brunel University. (Unpublished)

Oluwajobi, Akinjide O. and Chen, Xun (2009) Simulation of Abrasive Machining Using Molecular Dynamics. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Opoz, Tahsin Tecelli and Chen, Xun (2010) An Investigation of the Rubbing and Ploughing in Single Grain Grinding using Finite Element Method. In: 8th international Conference on Manufacturing Research, 14-16 Sept 2010, Durham, UK.

Opoz, Tahsin Tecelli and Chen, Xun (2010) Material removal phases in single abrasive grain grinding. In: AMPT 2010, October 24-27, Paris. (Unpublished)

Opoz, Tahsin Tecelli and Chen, Xun (2010) Numerical Simulation of Single Grit Grinding. In: Proceeding of the 16th International Conference on Automation & Computing, 11 Sept 2010, Birmingham, UK.

Panagiotopoulos, Andreas, Hothi, Harry, Whittaker, Robert, Matthies, Ashley K, Bills, Paul J., Racasan, Radu, Blunt, Liam, Skinner, John and Hart, A. J. (2015) Charactering taper junction wear helps understand the mechanism of failure of metal on metal hip replacements. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 24-28 2015, Las Vegas, NV, USA. (Submitted)

Panagiotopoulos, Andreas, Hothi, Harry, Whittaker, Robert, Meswania, Jay, Bills, Paul J., Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, A. J. (2015) Identifying The Pattern of Material Loss at the Head-Neck Junction Wear Helps Determine the Mechanism of Failure of Metal on Metal Total Hip Replacements. In: Orthopaedic Research Society Annual Meeting, March 28-31 2015, Las Vegas, NV, USA. (Submitted)

Parkinson, Simon, Longstaff, Andrew P., Fletcher, Simon, Crampton, Andrew, Allen, Gary and Myers, Alan (2011) Cryptographic Techniques in Metrology Software. In: University of Huddersfield Annual Research Festival School of Computing and Engineering 12th March 2010, Friday 12th March 2010, University of Huddersfield. (Submitted)

Peng, H., Liu, X., Jiang, Xiang and Wang, Y. (2007) Concurrent tolerance design based on a comprehensive model of manufacturing cost-quality loss. In: 10th International Conference on Computer Aided Tolerancing, 21st-23rd March, 2007, Erlangen, Germany. (Unpublished)

Pillutla, G., Mishra, Rakesh, Barrans, Simon and Barrans, John (2010) Evaluation of Loss Coefficient For Stand Alone Radiator. In: International Conference on Renewable Energy and Power Quality (ICREPQ'10), 23rd - 25th March 2010, Granada.

Pislaru, Crinela (2010) Development of Lifelong Learning Skills by Embedding E-learning into the Curriculum. In: HUDCETT conference, 11th May 2010, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2008) E-learning based approach in support of Problem Based Learning. In: Teaching and Learning Conference 2008: Enhancing Learning: Technology by Design, 15th September 2008, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2007) Modern vibration analysis and correction practices. In: Modern vibration analysis and correction practices, Tuesday 6th March 2007, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2009) Optimisation of real-time implementation for high speed feed drives models. In: Lamdamap 9th International Conference, 30th June – 2nd July 2009, Brunel University. (Unpublished)

Pislaru, Crinela (2010) Pedagogical Research Group - Present and Future. In: Computing and engineering research festival, 12th March 2010, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2007) Sensors and condition monitoring practices. In: Getting The Most Out of Machinery Condition Monitoring - The Design, Development and Application of Sensors, Tuesday 13th March 2007, Birmingham, UK. (Unpublished)

Pislaru, Crinela (2008) The design of an interactive multimedia learning environment for flexible modern education. In: Teaching and Learning Conference 2008: Enhancing Learning: Technology by Design, 15th September 2008, University of Huddersfield. (Unpublished)

Pislaru, Crinela, Ford, Derek G. and Freeman, J.M. (2002) On modular modelling of CNC machine tool drives: a comparison between simulation and experimentation. In: OPTIM 2002, 2002, Romania. (Unpublished)

Pislaru, Crinela, Ford, Derek G. and Holroyd, Geoffrey (2002) Modelling non-linearities from CNC machine tool drives. In: OPTIM 2002, 2002, Romania. (Unpublished)

Pislaru, Crinela, Ford, Derek G. and Moreno-Castaneda, V.Y. (2005) Modelling and simulation of CNC machine tool feed drives. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Pislaru, Crinela, Ford, Derek G., Widiyarto, Muhammad Helmi Nur, Longstaff, Andrew P. and Myers, Alan (2007) Hardware-in-the-loop implementation of modern CNC machine tool feed drive models. In: 8th International LAMDAMAP Conference, 26 - 28 June 2007, Cardiff University.

Pislaru, Crinela, Ford, Derek G., Widiyarto, Muhammad Helmi Nur and Myers, Alan (2005) Methods for modal parameters identification applied to CNC machine tool feed drives. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Pislaru, Crinela and Mishra, Rakesh (2009) Using VLEs to support student centred learning in control engineering education. In: 5th International Conference on Multimedia and Information Communication Technologies in education - m-ICTE2009 Conference, 22nd-24th April 2009, Lisbon, Portugal. (Unpublished)

Pislaru, Crinela, Moreno-Castaneda, V.Y. and Ford, Derek G. (2004) Dynamic model of a non-linear servo control system using transmission line modelling technique. In: UKACC International Conference CONTROL 2004, 6-9 September 2004, University of Bath. (Unpublished)

Pislaru, Crinela, Myers, Alan and Ford, Derek G. (2006) Methods for modelling and simulating the dynamic behaviour of CNC machine tool feed drives. In: EUSPEN 2006, 28th May - 1st June 2006, Baden bei Wien, Austria.

Pislaru, Crinela, Myers, Alan, Ford, Derek G. and Moreno-Castaneda, V.Y. (2006) Modelling the Dynamic Behaviour of CNC Machine Tool Feed Drives by Using a Novel 2D Transmission Line Model. In: EUSPEN 2006, 28th May- 1st June 2006, Baden bei Wien, Austria.

Pislaru, Crinela, Sztendel, S., Ford, Derek G. and Myers, Alan (2008) Real-time implementation of a novel transmission line matrix (TLM) model for high speed feed drives. In: MATAR 2008, 15th-18th September 2008, Prague University. (Unpublished)

Pislaru, Crinela, Widiyarto, Muhammad Helmi Nur, Ford, Derek G. and Myers, Alan (2007) Theoretical and experimental approach for the evaluation of structural dynamics of CNC machine tools. In: Lamdamap 2007 8th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, 25th June-28th June 2007, Cardiff University, Wales. (Unpublished)

Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, C. and Pislaru, Crinela (2007) Analysis and reduction of machine tool non-rigid errors. In: School of Computing and Engineering Annual Researchers’ Conference 2007, 14th December 2007, University of Huddersfield. (Unpublished)

Rascher, Rolf, Fähnle, Oliver, Wünsche, Christine, Schopf, Christian, Faehnle, Oliver, Yu, Guoyu and Walker, David D. (2016) Analysis of tool-mass-acceleration effects onto sub-aperture computer controlled polishing (CCP). In: Third European Seminar on Precision Optics Manufacturing.

Ren, Hongyu, Gao, Feng and Jiang, Xiang (2016) Simulation study of a refined approach for specular surfaces reconstruction in deflectometry. In: 16th International Conference and Exhibition EUSPEN, 30th May-3rd June 2016, Nottingham, UK.

Rosen, B.G. and Blunt, Liam (2007) Adaptive evaluation of a time and information efficient surface sampling. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK. (Unpublished)

Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2006) Discrete-time Model Reference Control of Milling Forces under Fractional Order Holds. Part I: Known Plant. In: IEEE Conference on Emerging Technologies and Factory Automation, 2006. ETFA '06, 20-22 September 2006, Prague, Czech Republic.

Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2006) Discrete-time Model Reference Control of Milling Forces under Fractional Order Holds. Part II: Extensions to Adaptive Control. In: IEEE Conference on Emerging Technologies and Factory Automation, 2006. ETFA '06, 20-22 September 2006, Prague, Czech Republic.

Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2008) A procedure to obtain mill cutter and cutting parameters using parameter optimization under constraints and expert rules. In: IEEE International Conference on Control Applications, 2008. CCA 2008, 3-5 September 2008, San Antonio, Texas.

Savini, G., Ade, P.A.R., Baccichet, N., Bracken, C., Dohlenh, K., Donohoe, A., Gom, B., Griffin, M.J., Holland, W., Iafolla, V., Ivison, R.J., Jones, M., Juanola-Parramon, R., Lightfoot, J., Liu, S., McMillan, A., Murphy, J.A., Naylor, D., O'Sullivan, C., Pascale, E., Pezzutto, S., Rakotonimbahy, E., Schito, D., Spencer, L., Spinoglio, L., Swinyard, B., Venendaal, I., Vives, S., Walker, D.D., Leisawitz, D., Shi, S. and Matsuo, H. (2015) Progress in the critical assessment for a far-infrared space interferometer with double fourier modulation (FP7-FISICA). In: UNSPECIFIED.

Scott, Paul J. (2007) Feature parameters. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.

Shagluf, Abubaker, Longstaff, Andrew P., Fletcher, Simon, Denton, Paul and Myers, Alan (2013) Predictive Calibration-Based Tolerance Boundaries For Arresting Deterioration of Machine Tool Accuracy. In: 2nd Annual EPSRC Manufacturing the Future Conference, 17-18 September 2013, Cranfield University, UK.

Sperring, T. and Pislaru, Crinela (2006) COMONET – the DTI knowledge transfer network for condition monitoring sensors. In: The European Conference in Lubrication Management and Technology LUBMAT 2006, 14-16 June 2006, Preston, UK.

Swinyard, B., Auriacombe, O., Bradshaw, T., Brooks, D., Charlton, J., Crook, M., Davies, G., Ellison, B., Emes, M., Friend, J., Gerber, D., Gray, C., Henry, M., Hunt, T., Linfield, E., Navarathinam, N., Parks, S., Rawlings, T., Rea, S., Saunders, C., Savini, G., Tun, S.M., Walker, D.D., Wang, H. and Winter, B. (2016) The LOw Cost Upper atmosphere Sounder: the "Elegant Breadboard" programme. In: Millimeter Waves and THz Technology Workshop.

Sztendel, S. and Pislaru, Crinela (2009) Developing mechatronic models of modern CNC machine tools for real-time implementation. In: Lamdamap 9th International Conference, 30th June – 2nd July 2009, Brunel University. (Unpublished)

Sztendel, S. and Pislaru, Crinela (2008) Development of control grafical user interface (GUI)for a dSPACE real-time system. In: Research Festival - School of Computing and Engineering Research Open Day, Friday 7th March 2008, University of Huddersfield. (Unpublished)

Sztendel, S., Pislaru, Crinela, Ford, Derek G. and Myers, Alan (2008) Development of experiment control graphical user interface for Hardware in the Loop (HIL) simulations. In: MATAR 2008, 15th-18th September 2008, Prague University. (Unpublished)

Tawfik, Ahmed, Racasan, Radu, Bills, Paul J. and Blunt, Liam (2017) Detection of unmelted powder in additive manufactured components using computer tomography. In: Dimensional X-ray Computed Tomography Conference, 13 July 2017, University of Warwick, UK. (Unpublished)

Tawfik, Ahmed, Racasan, Radu, Blunt, Liam and Bills, Paul J. (2017) Characterization of defects/porosity in additive manufactured components using computer tomography. In: Joint Special Interest Group meeting between euspen and ASPE Dimensional Accuracy and Surface Finish in Additive Manufacturing,, 10-11th October 2017, Leurven, Belgium. (Unpublished)

Tecelli Opoz, Tahsin and Chen, Xun (2009) Robotic Grinding and Polishing Process Technology. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Tonnellier, X., Shore, P., Morantz, P., Baldwin, A., Evans, R. and Walker, D.D. (2007) Comparison of the subsurface damage induced when precision grinding ULE® and Zerodur® surfaces. In: UNSPECIFIED.

Tonnellier, X., Shore, P., Morantz, P., Baldwin, A., Walker, D.D. and Evans, R. (2006) Subsurface damage caused during rapid grinding of Zerodurâ. In: UNSPECIFIED.

Tran, Van Tung (2010) Development of intelligent techniques for machine prognostics. In: International Symposium on Advanced Mechanical and Power Engineering, 11-13 Nov. 2010, Fukui, Japan.

Unver, Ertu and Mavromihales, Mike (2001) Design and Development of an interactive 3D CNC Computer Aided Learning Program. In: 17th International Conference on CAD/CAM, Robotics and Factories of Future, 10-12 July 2001, Durban, South Africa.

Walker, D.D., Beaucamp, A., Doubrovski, V., Dunn, C., Evans, R., Freeman, R., McCavana, G., Morton, R., Riley, D., Simms, J., Yu, G. and Wei, X. (2008) Commissioning of the first Precessions 1.2m CNC Polishing Machines for Large Optics. In: UNSPECIFIED.

Walker, D.D., Bingham, R. and Bigelow, B. (1993) Adaptive Optics with No Additional Surfaces. In: UNSPECIFIED. (Submitted)

Walker, D.D., Dunn, C., Yu, G., Bibby, M., Zheng, X., Wu, H.Y., Li, H. and Lu, C. (2015) The role of robotics in computer controlled polishing of large and small optics. In: Optical Manufacturing and Testing XI, August, 2015, San Diego, CA.

Walker, D.D., Freeman, R., Hobbs, G., King, A., McCavana, G., Morton, R., Riley, D. and Simms, J. (2005) Zeeko 1 metre polishing system. In: UNSPECIFIED.

Walker, D.D. and Hutchinson, M. (2005) Matching Manufacturing and Measurements-solutions for Free-Form Surfaces. In: UNSPECIFIED.

Wang, J., Jiang, Xiang, Blunt, Liam, Leach, R.K. and Scott, Paul J. (2012) A boundary segmentation algorithm for extracting microscale dimensional parameters in the measurement of structured surfaces. In: euspen 12th International Conference and Exhibition, 4 - 8 June 2012, Stockholm, Sweden. (Unpublished)

Wang, J.X., Ma, L.M., Jiang, Xiang, Xu, Zhijie and Li, Z. (2004) Uncertainty of flatness least-square verification. In: ISIST 2004, The Third International Symposium on Instrumentation Science and Technology, 18th-22nd August 2004, China. (Unpublished)

Wang, Jian, Jiang, Xiang, Blunt, Liam and Leach, Richard K. (2009) Structured Surfaces, Measurements & Characterization. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Wang, Kaiwei, Jiang, Xiang and Martin, Haydn (2007) Advances of optical fibre interferometer for on-line surface measurement. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.

Whittaker, Robert, Hothi, Harry, Meswania, Jay, Bills, Paul J., Racasan, Radu, Eskelinen, Antti, Blunn, Gordon, Skinner, John and Hart, A. J. (2015) 36mm Metal-on-Metal Hips have Similar Taper Material Loss Rates as Larger Diameter Hips from the Same Manufacturer. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 24-28 2015, Las Vegas, NV, USA. (Submitted)

Xie, F., Xiao, Shaojun, Blunt, Liam and Jiang, Xiang (2007) Component-based software framework for surface topography visualization and analysis. In: The 11th International Conference on Metrology and Properties of Engineering, 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.

Xie, Lili, Huang, Shujun, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2014) Projector calibration method based on optical coaxial camera. In: International Conference on Optoelectronic Technology and Application, 13-15 May 2014, Beijing, China.

Xu, Qiang, Barrans, Simon, Holmes, A. and Ford, Derek G. (2004) Understanding the dynamic response of a machine tool structure by finite element analysis. In: EUSPEN 4th International Conference, 30th May-3rd June 2004, Glasgow. (Unpublished)

Xu, Y., Ye, X., Xu, J., Li, C. and Gao, F. (1990) A High Precision Fold Fabry-Perot Interferometer for Measuring Displacement. In: National Geometric Metrology Symposium, 1990, Qingdao, China.

Xu, Y., Ye, X., Xu, J., Li, C. and Gao, F. (1990) A Laser Heterodyne Interferometer for Measuring Air Refractive Index. In: National Geometric Metrology Symposium, 1990, Qingdao, China.

Xu, Y., Ye, X., Xu, J., Li, C. and Gao, F. (1989) A Laser Heterodyne Interferometer for Measuring Nanometer Displacement. In: 2nd IMEKO TC14 International Symposium on Metrology for Quality Control in Production, 1989, Beijing, China.

Xu, Y., Ye, X., Xu, J., Li, C. and Gao, F. (1990) Precise Determination of 633nm He-Ne Laser Wavelength in Air. In: 12th IMEKO World Congress Measurement and Progress DIGESE, 1990, Beijing, China.

Xu, Yongjia, Gao, Feng, Zhang, Zonghua and Jiang, Xiang (2017) A calibration method for non-overlapping cameras based on mirrored phase target. In: The 13th International Symposium on Measurement Technology and Intelligent Instruments, 22-25 September 2017, Xi'an, Shaanxi, China. (Unpublished)

Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2008) Implementation of a Category Theory-Based GPS Knowledge System for Product Design. In: The 14th International conference on Automation & Computing, Saturday, 6th September 2008,, ICAC 2008 Conference.

Yan, W., Scott, Paul J. and Jiang, Xiang (2007) Structures of specification and verification knowledge-base in surface texture knowledge-based system. In: 10th International Conference on Computer Aided Tolerancing, 21st-23rd March, 2007, Erlangen, Germany.

Yang, Shuming (2009) A Chip Device For On-line Assessment In Nano-scale Surface Manufacture. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Yao, Shaowen, Barrans, Simon and Blunt, Liam (2007) Incompressible and Analytical Study on a Basic Model of Out-Pump Type Complex Journal Gas Bearings. In: The 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2007), 24-27 September 2007, Tohoku University, Sendai, Japan. (Unpublished)

Yu, Y, Huang, Shujun, Zhang, Zonghua, Gao, Feng and Jiang, Xiang (2014) The research of 3D small-field imaging system based on fringe projection technique. In: International Conference on Optoelectronic Technology and Application, 13-15 May 2014, Beijing, China.

Zeng, Wenhan and Jiang, Xiang (2005) Complex wavelet transform based surface topography analysis. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2009) A Generalised Linear and Nonlinear Spline filter. In: 12th International Conference on Metrology and Properties of Engineering Surfaces, 8-10 July 2009, Rzeszów, Poland. (Submitted)

Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2005) Metrological characteristics of complex wavelet transform for surface topography analysis. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2008) Morphological Component Analysis based Detection of Transient Behaviour in Environmental Vibration for the Watt Balance. In: 10th International Conference of the European Society for Precision Engineering and Nanotechnology, euspen, 18th-22nd May 2008, Kongresshaus Zurich.

Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2009) New Geometrical Filtratation For Ultra-Precision And Micro,Nano Manufactured Products. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Zeng, Wenhan, Lou, Shan, Abdul-Rahman, Hussein S., Jiang, Xiang and Scott, Paul J. (2017) Simultaneous Multi-type Feature Separation for Complex Structured Surface Analysis. In: Lamdamap 12th International Conference & Exhibition, 15-16th March 2017, Renishaw Innovation Centre, UK. (Unpublished)

Zhang, H., Brown, L. and Blunt, Liam (2007) Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacement. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK. (Unpublished)

Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2009) Evaluation Of Fretting Wear On The Femoral Stem Surface. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco.

Zhang, Hao (2009) Model-based Fault Detection For A Turbocharger. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Zhang, Hao, Shi, John Z., Gu, Fengshou and Ball, Andrew (2010) Bending vibration of an automotive turbocharger under the influence of rotor imbalance. In: CM 2010 and MFPT 2010 The 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England. (Unpublished)

Zhang, Hongyu, Brown, L., Blunt, Liam and Barrans, Simon (2009) Evaluation of fretting wear on the femoral stem surface. In: International Conference on Bioengineering & Biomaterials, 18-29 March, Meknes, Moroco.

Zhang, Hongyu, Brown, Leigh and Blunt, Liam (2007) A better understanding of the surface topography at the stem-cement interface. In: ASME/STLE International Joint Tribology Conference, 22nd-24th October 2007, San Diego, California, USA.

Zhang, Hongyu, Brown, Leigh, Blunt, Liam and Barrans, Simon (2008) An investigation on generation of debris at the stem cement interface. In: 8th World Biomaterials Congress, 28th May -1st June 2008, Amsterdam, The Netherlands. (Unpublished)

Zhang, Tao, Gao, Feng and Jiang, Xiang (2017) A method for inspecting double-sided high-sloped structured surfaces based on dual-probe wavelength scanning interferometer. In: The 13th International Symposium on Measurement Technology and Intelligent Instruments, 22-25 September 2017, Xi'an, Shaanxi, China. (Unpublished)

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) A Minimax Fitting Algorithm for Ultra-Precision Aspheric Surfaces. In: The 13th International Conference on Metrology and Properties of Engineering Surfaces, 12-15 April 2011, National Physical Laboratory, Teddington, UK. (Unpublished)

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2009) The Orthogonal Distance Fitting Of Parametric Surfaces For Precision Coordinate Metrology. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2008) Orthogonal distance fitting of precision free form surfaces based on l1 norm. In: Conference on Advanced Mathematical and Computational Tools in Metrology and Testing, 23 – 25 June 2008, Paris, France.

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2010) Shape recognition and form error evaluation of quadric surfaces. In: Measurement Systems and Process Improvement (MSPI) 2010, 19-20, Apr, 2010, NPL, Teddington, UK. (Unpublished)

Zhang, Xiangchao, Jiang, Xiang, Scott, Paul J. and Cooper, Philip (2009) A Fast Point Projection Approach of NURBS surfaces. In: A4A6 - Algorithms for Approximation VI 2009, 31st August - 4th September 2009, Ambleside, UK. (Unpublished)

Zhang, Zonghua, Huang, Shujun, Gao, Nan, Gao, F. and Jiang, Xiang (2017) Full-Field 3D Shape Measurement of Specular Object Having Discontinuous Surfaces. In: International Conference on Optical and Photonic Engineering (icOPEN 2017), 5-7 April 2017, Singapore.

Zhang, Zonghua, Liu, Y, Huang, Shujun, Niu, Z, Guo, J, Gao, N, Gao, Feng and Jiang, Xiang (2016) Full-Field 3D Shape Measurement of Specular Surfaces by Direct Phase to Depth Relationship. In: SPIE: Optical Metrology and Inspection for Industrial Applications IV, 12-14 October 2016, Beijing, China.

Zhu, Hao, Blunt, Liam and Jiang, Xiang (2009) An Active Contour Based Algorithm for Micro-scale Surface Feature Extraction. In: The Swedish Production Symposium, 2-3 December 2009, Göteborg, Sweden.

Zhu, Hao, Blunt, Liam, Jiang, Xiang and Shaojun, Xiao (2009) Measurement and characterisation of micro nano-scale structured surfaces. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Zhu, Hao, Blunt, Liam, Jiang, Xiang and Xiao, Shaojun (2009) Recognition of Features from Micro Scale Patterned Surfaces. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia.

Book

Chen, Wen-hua, Chen, Xun and Xu, Zhijie (2011) Proceedings of the 17th International Conference on Automation & Computing. University of Huddersfield. ISBN 9781862180987

Luo, Xichun, Cao, Yi and Tong, Zhen (2015) Proceedings of the 20th International Conference on Automation and Computing (ICAC'14) Future Automation, Computing & Manufacturing. ICAC, 14 . University of Strathclyde Press, Strathclyde, UK. ISBN 978-1-909522-02-2

Stout, K.J. and Blunt, Liam (2000) Three dimensional surface topography. Penton, London, UK. ISBN 1857180267

Thesis

Akowua, Kwame D.B (2018) Integration of On-Machine Surface Metrology and Machining Process Prediction. Doctoral thesis, University of Huddersfield.

Bills, Paul J. (2007) The development of a geometric methodology for the determination of volumetric wear in total joint replacements & development of a total knee replacement joint using new and novel measurement techniques. Doctoral thesis, University of Huddersfield.

Longstaff, Andrew P. (2002) Methods of evaluation of the positioning capability of Cartesian and non-Cartesian machines. Doctoral thesis, University of Huddersfield.

Martin, Haydn (2010) Investigations into a multiplexed fibre interferometer for on-line, nanoscale, surface metrology. Doctoral thesis, University of Huddersfield.

Masbah, Aeman (2018) Optical Character Recognition based approach for automatic Image Marking Process. Doctoral thesis, University of Huddersfield.

Papananias, Moschos (2018) COMBINED NUMERICAL AND STATISTICAL MODELLING FOR IN-DEPTH UNCERTAINTY EVALUATION OF COMPARATIVE COORDINATE MEASUREMENT. Doctoral thesis, University of Huddersfield.

Yang, Shuming (2009) A novel chip interferometry system for online surface measurements. Doctoral thesis, University of Huddersfield.

Zhang, Xiangchao (2009) Free-form surface fitting for precision coordinate metrology. Doctoral thesis, University of Huddersfield.

Patent

Jiang, Xiang, Wang, Kaiwei, Martin, Haydn and Yang, Shuming (2007) Surface characteristic determining apparatus. WO2007144654.

This list was generated on Tue Dec 3 16:22:06 2024 UTC.