Items where School is "Centre for Precision Technologies"

University of Huddersfield (28748)
- School of Computing and Engineering (4930)
  - Centre for Precision Technologies (1003)
    - Advanced Machining Technology Group (106)
    - EPSRC Centre for Innovative Manufacturing in Advanced Metrology (183)
    - Engineering Control and Machine Performance Research Group (235)
    - Surface Metrology Group (386)

Group by: Creators | Date | Item Type | Uncontrolled Keywords | No Grouping

2D 2Â½D 3D - Cutting force - Dynamic - Experiment - Peripheral milling - Prediction - Verification 3D position measurement Abrasive Machining abrasive wear Absolute phases Active contours active control Adaptive adaptive sampling adjoint functors advanced adaptive sampling advances aerostatic ALE adaptive meshing alpha shape ANSYS Applied artificial intelligence asphere aspheres Aspheric Astronomy Astronomy & Astrophysics automation BeamPROP bearings bis-acrylic composite bone cement bonnet polishing Boundary effect BPM Categorical Category Model Category Theory cell culture cell therapy Cellular Automata Centre treatment Ceramics chip formation Chromatic aberration Closed sinusoidal fringe patterns CMM CNC polishing CoCr alloy cold roll forming Combustion Diagnosis Common path Component Based Software Development Components Composites Condition Monitoring condition monitoring system CONSTRUCTION contact analysis control CONTROLLER Convolution Coordinate metrology correcting data DBMS Deviation calibration Diesel Engine DIFFRACTION digital gap Discontinuous surface measurement discrete wavelet transform dispersive probing Displacement double-Fourier dynamic E-learning E-learning Libyan ICT digital gap e-learning barriers e-learning barriers edge control Edge detection efficient Electrical & Electronic electrical drives energy harvesting Engineering Environmental Disturbance epi-illumination evaluation Exhaust Acoustics expert system Extensibility extremely large telescope far-infrared (far-IR) Fast sampling Fatigue FEA feature parameters femoral stem FFT fibre Bragg grating fibre interferometer vibration stabilised filtering Finite element analysis finite element method finite element model FISICA Fixture Design Optimisation Flexible form Form error free-form Freeform Fretting wear fretting wear simulation Friction Friction reduction functional surfaces Gaussian filtering Generalised Spline filter Genetic Algorithm Genetic algorithms Geometrical Product Specifications (GPS) GLASS GPS graphic processing unit Graphics process unit grinding grolish ground hard disk hardness hybrid image analysis Imaging and sensing influence function integrated control Integrated modelling integrated optics Interatomic Potentials Interface interference fringes interferometer interferometry inverse problem IO coupler ISO standards key parameter Knowledge management knowledge structure Knowledge-based System large machined surface Large-optical Laser Laser diodes laser interferometry Laser scanning LCD (liquid crystal display) screen Lean manufacturing Libyan ICT Line singularities LONG-TRACE-PROFILER Loose abrasive machining M-estimation Machine performance machine tool Machine tool accuracy Machine tool calibration automation machine tool non-rigid errors Machine Tool Spindle Machinery Machinery Tools magnetic storage Manufacturing Matching material removal material removal characteristic Materials Science mathematical morphology MATLAB Measurement Measurements MEMS microstructure surface wavelet mesenchymal stem cells metrology Metrology and measurement metrology uncertainty surface texture parameter Micro finishing micro-scale features extraction microcarriers Micromachining micromanufacturing mid-spatial frequency MIDDLE Minimum Depth of Cut Minimum zone Mirror Mirrors missing data modeling modelling Modelling simulation scale roller rig critical speed Molecular Dynamics Morphological feature morphological filters MOSA Multi-objective optimization Multi-sensor multilateration multiple scattering effect multiplexed fibre interferometer multiplexed fibre interferometer stabilisation surface measurement Nanomachining nanomanufacturing Nanometer removal nanotechnology Nigeria Non-Contact Measurement Non-overlap subaperture stitching Nonlinear filter novel offline simulation Oil and gas on-line surface measurement Online/In-Process Measurement Optical inspection Optical metrology Optical sensors Optics orthogonal cutting Parallel computation parallel processing Pareto parts paste polishing PEMA Phase calculation Phase deflectometry phase shifting Physical Sciences Physics Piezoelectric Tranducer plasticity ploughing polish Polishing Polynomial fitting pre-polishing Precessions Precision machining Precision-mechanical process process.smoothing profile measurement pull out test Quadric surfaces Radial basis function Radio energy modelling Radon transform rail vehicle dynamics railway vehicle real surface metrology real time Reference interferometer Reflection Suppression Removal resurfacing Reuse Reverse engineering Ridgelets robot Robust filter roughness CCI (Coherence Correlation Interferometer) rubbing Science & Technology secondary segment segmentation segments Self-adaptive differential evolution Shift invariance simulation smooth snakes solutions spatial resolution Spectrum analysis Speculur object 3D measurement Spindle Error Square Zernike polynomial Stabilised Interferometer stability stem cement interface structured surfaces stylus profilometry Subaperture distribution pattern surface Surface characterisation Surface characterization surface form Surface Measurement surface metrology Surface network Surface reconstruction surface roughness surface roughness measurement Surface segmentation surface texture surface topography Surfaces Sustainable manufacturing swing arm profilometer system System calibration Systematic errors technique Technology TELESCOPE texture Thermal deformations Thermal error three-body abrasion tilt tool geometry Torsional fretting Torsional sliding track-based sensors Training Transmission power control two-body abrasion Ultrasonic uniform sampling United States Use V-band clamp V-band retainer V-groove measurement vehicle-based sensors Vibration Vibration compensation wavelength scanning Wavelength Scanning Interferometer wavelength-division- multiplexing Wear wear debris Wear mechanism White light interferometry Wireless sensor networks Wolfe prune Workbench Zeeko

Number of items at this level: 458.

2D

Walker, D.D., Freeman, R., Morton, R., McCavana, G. and Beaucamp, A. (2006) Use of the ‘Precessions’™ process for prepolishing and correcting 2D & 2½D form. Optics Express, 14 (24). pp. 11787-11795. ISSN 1094-4087

2Â½D

3D - Cutting force - Dynamic - Experiment - Peripheral milling - Prediction - Verification

Liu, X., Cheung, K., Webb, D., Fiang, X.Q., Xiao, S.J., Longstaff, Andrew P., Widiyarto, H.M. and Jiang, Xiang (2004) Improved dynamic cutting force model in peripheral milling Part 2 Experimental verification and prediction. International Journal of Advanced Manufacturing Technology, 24. pp. 794-805. ISSN 0268-3768

3D position measurement

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter, Myers, Alan and Briggs, Jack (2008) A multifrequency FM-based ultrasonic system for accuracy 3D measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 9-14. ISBN 978-1-86218-067-3

Abrasive Machining

Oluwajobi, Akinjide O. and Chen, Xun (2010) The Effect of Interatomic Potentials on Nanometric Abrasive Machining. In: Proceedings of the 16th International Conference on Automation & Computing, University of Birmingham, Birmingham, UK, 11 September 2010. Chinese Automation and Computing Society in the UK, pp. 130-135. ISBN 9780955529368

Oluwajobi, Akinjide O. and Chen, Xun (2008) Modelling abrasive machining techniques using molecular dynamics. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 100-105. ISBN 978-1-86218-067-3

Oluwajobi, Akinjide O. and Chen, Xun (2010) The effect of tool geometry on rubbing and ploughing phenomena in nano abrasive machining. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 160-165. ISBN 9781862180932

abrasive wear

Opoz, Tahsin Tecelli and Chen, Xun (2009) Finite element simulation of grinding process and micro-scale abrasive wear. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 165-171. ISBN 9781862180857

Absolute phases

Liu, Xiaohong, Huang, Shujun, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2017) Full-field calibration of color camera chromatic aberration using absolute phase maps. Sensors, 17 (5). ISSN 1424-8220

Active contours

Zhu, Hao, Blunt, Liam and Jiang, Xiang (2009) Flexible shape extraction for micro/nano scale structured surfaces. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 190-194. ISBN 9781862180857

active control

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Review of control strategies used in modern railway vehicles. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 160. ISBN 978-1-86218-106-9

Adaptive

Lee, J.H., Doel, A.P. and Walker, D.D. (2000) Adaptive secondary mirror demonstrator: construction and preliminary evaluation. Optical Engineering, 39 (4). ISSN 0091-3286

adaptive sampling

Wang, Jian, Jiang, Xiang and Blunt, Liam (2010) Simulation of Adaptive Sampling in Profile Measurement for Structured Surfaces. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 48-53. ISBN 9781862180932

adjoint functors

Ding, Hao and Scott, Paul J. (2012) Structure of Mathematical Morphology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 20-24. ISBN 978-1-86218-106-9

advanced adaptive sampling

Wang, J, Jiang, Xiang and Blunt, Liam (2009) A survey of potential sampling strategies for measurement of structured surfaces. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 184-189. ISBN 9781862180857

advances

Walker, D.D., Beaucamp, A.T.H., Doubrovski, V., Dunn, C., Freeman, R., Hobbs, G., McCavana, G., Morton, R., Riley, D., Simms, J. and Wei, X. (2005) Recent advances in the control of form and texture on free-form surfaces (invited paper). SPIE - International Society for Optical Engineering. Proceedings, 5965. ISSN 0277-786X

aerostatic

Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X

ALE adaptive meshing

Opoz, Tahsin Tecelli and Chen, Xun (2010) Finite element simulation of chip formation. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 166-171. ISBN 9781862180932

alpha shape

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2010) A Fast Algorithm for Morphological Filters. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 190. ISBN 9781862180932

ANSYS

Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Myers, Alan, Fletcher, Simon and Ford, Derek G. (2012) Analysis of complex interactions between mechanical elements using ansys and simulink. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 136-141. ISBN 978-1-86218-106-9

Applied

Bracken, C., O'Sulllvan, C., Donohoe, A., Murphy, A., Savini, G., Juanola-Parramon, R., Baccichet, N., Guisseau, A., Ade, P., Pascale, E., Spencer, L., Walker, I., Dohlen, K., Lightfoot, J., Holland, W., Jones, M., Walker, D.D. and McMillan, A. (2015) Optical and Quasi-Optical Analysis of System Components for a Far-Infrared Space Interferometer. In: UNSPECIFIED.

artificial intelligence

Ashari, Djoni, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Artificial intelligence-based condition monitoring for practical electrical drives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 143. ISBN 978-1-86218-106-9

asphere

Callender, M.J., Efstathiou, A., King, C.W., Walker, D.D., Gee, A.E., Lewis, A.J., Oldfield, S. and Steel, R.M. (2006) A swing arm profilometer for large telescope mirror element metrology. SPIE - International Society for Optical Engineering. Proceedings. ISSN 0277-786X

Walker, D.D., Dunn, C., Yu, G., Bibby, M., Zheng, X., Wu, H.Y., Li, H. and Lu, C. (2015) The role of robotics in computer controlled polishing of large and small optics. In: Optical Manufacturing and Testing XI, August, 2015, San Diego, CA.

aspheres

Walker, D.D., Beaucamp, A.T.H., Doubrovski, V., Dunn, C., Freeman, R., McCavana, G., Morton, R., Riley, D., Simms, J. and Wei, X. (2005) New results extending the Precessions process to smoothing ground aspheres and producing freeform parts. SPIE - International Society for Optical Engineering. Proceedings, 5869. pp. 79-87. ISSN 0277-786X

Aspheric

Walker, D.D., Brooks, D., King, A., Freeman, R., Morton, R., McCavana, G. and Sug-Whan, K. (2003) The precessions tooling for polishing and figuring flat,spherical and aspheric surfaces. Optics Express, 11 (8). pp. 958-964. ISSN 1094-4087

Astronomy

Lee, J.H., Doel, A.P. and Walker, D.D. (2000) Adaptive secondary mirror demonstrator: construction and preliminary evaluation. Optical Engineering, 39 (4). ISSN 0091-3286

Astronomy & Astrophysics

Han, W.Y., Clayton, M.J. and Walker, D.D. (1996) Steps toward efficient mosaic CCD system design. Publications of the Astronomical Society of the Pacific, 108 (729). pp. 1028-1032. ISSN 0004-6280

Lee, J.H., Bigelow, B.C., Walker, D.D., Doel, A.P. and Bingham, R.G. (2000) Why adaptive secondaries? Publications of the Astronomical Society of the Pacific, 112 (767). pp. 97-107. ISSN 0004-6280

automation

BeamPROP

Yang, Shuming and Jiang, Xiang (2007) The beam propagation method used for the design of an integrated optical coupler. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

bearings

Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X

bis-acrylic composite

Abouelatta, O.B., El-Bediwi, A., Sakrana, A., Jiang, Xiang and Blunt, Liam (2006) Surface integrity of provisional resin materials. Measurement Science and Technology, 17 (3). pp. 584-591. ISSN 0957-0233

bone cement

Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2007) Generation of fretting wear debris at the stem-cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-4.

bonnet polishing

Zeng, S., Blunt, Liam and Jiang, Xiang (2012) Material removal investigation in bonnet polishing of CoCr alloy. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 25-30. ISBN 978-1-86218-106-9

Boundary effect

Zhang, X., Jiang, Xiang and Crampton, Andrew (2007) Numerical Analysis of the Boundary Effect of Radial Basis Functions in 3D Surface Reconstruction. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

BPM

Categorical

Xu, Yuanping, Xu, Zhijie, Jiang, Xiang, Scott, Paul J. and Pickering, Jonathan (2008) Evaluation on the categorical DBMS for the VirtualGPS knowledge system. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 81-86. ISBN 978-1-86218-067-3

Category Model

Wang, Yan, Scott, Paul J. and Jiang, Xiang (2006) Category model to modeling the surface texture knowledge-base. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-7.

Category Theory

cell culture

Odeleye, Akinlolu Oyekunle Oluseun, Castillo-Avila, Sara, Boon, Mathew, Martin, Haydn and Coopman, Karen (2017) Development of an optical system for the non-invasive tracking of stem cell growth on microcarriers. Biotechnology and Bioengineering, 114 (9). pp. 2032-2042. ISSN 0006-3592

cell therapy

Cellular Automata

Oluwajobi, Akinjide O. and Chen, Xun (2009) Cellular automata modelling of micro abrasive machining. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 159-164. ISBN 9781862180857

Centre treatment

Ceramics

Yang, H., Kim, S. and Walker, D.D. (2004) A novel profilometer for nanometric form assessment for large machined surfaces. Key Engineering Materials, Advances in Abrasive Technology VI, 257. pp. 225-230. ISSN 1013-9826

chip formation

Chromatic aberration

Liu, Xiaohong, Huang, Shujun, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2017) Full-field calibration of color camera chromatic aberration using absolute phase maps. Sensors, 17 (5). ISSN 1424-8220

Closed sinusoidal fringe patterns

Liu, Xiaohong, Huang, Shujun, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2017) Full-field calibration of color camera chromatic aberration using absolute phase maps. Sensors, 17 (5). ISSN 1424-8220

CMM

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2014) Rapid and accurate reverse engineering of geometry based on a multi-sensor system. International Journal of Advanced Manufacturing Technology, 74 (1-4). pp. 369-382. ISSN 0268-3768

CNC polishing

Li, H., Yu, G., Walker, D.D. and Evans, R. (2011) Modelling and measurement of polishing tool influence functions for edge control. Journal of the European Optical Society: Rapid Publications, 6 (ARTN 1). ISSN 1990-2573

Yu, G., Li, H. and Walker, D.D. (2011) Removal of Mid Spatial-Frequency Features in Mirror Segments. Journal of the European Optical Society: Rapid Publications, 6 (ARTN 1). ISSN 1990-2573

CoCr alloy

Zeng, Shengye, Blunt, Liam, Jiang, Xiang and Bills, Paul J. (2010) Investigation of the material removal characteristic for polishing CoCr alloy. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 177-182. ISBN 9781862180932

cold roll forming

Muller, M and Barrans, Simon (2009) Ultimate axial load capacity of v-band clamp joints. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 14-18. ISBN 9781862180857

Combustion Diagnosis

Jiang, Xiang, Gu, Fengshou and Ball, Andrew (2008) Automotive Diesel Engine Performance and Condition Monitoring using Downpipe Acoustic Waveform Analysis. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Common path

Gao, F. and Jiang, Xiang (2017) Environmental robust interferometry for online/in-process surface inspection. In: The 2nd International Forum on Surface and Microscopy, 7-9 August 2017, Harbin, China. (Unpublished)

Component Based Software Development

Lan, Xiangqi, Jiang, Xiang, Blunt, Liam and Xiao, Shaojun (2009) An adaptive system framework for surface characterisation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 142-146. ISBN 9781862180857

Components

Lan, Xiangqi, Blunt, Liam and Xiao, Shaojun (2010) Building a Flexible Surface Characterisation System Architecture. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 43-47. ISBN 9781862180932

Walker, D.D., Beaucamp, A., Brooks, D., Doubrovski, V., Cassie, M.D., King, A., Libert, M., McCavana, G., Morton, R., Riley, D. and Simms, J. (2004) Recent developments of precessions polishing for larger components and free-form surfaces. SPIE - International Society for Optical Engineering. Proceedings, 5523. pp. 281-289. ISSN 0277-786X

Composites

Condition Monitoring

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modern techniques for condition monitoring of railway vehicle dynamics. Journal of Physics: Conference Series, 364. 012016. ISSN 1742-6596

Willoughby, P, Verma, M, Longstaff, Andrew P. and Fletcher, Simon (2010) A Holistic Approach to Quantifying and Controlling the Accuracy, Performance and Availability of Machine Tools. In: Proceedings of the 36th International MATADOR Conference. Springer, London, UK, pp. 313-316. ISBN 978-1-84996-431-9

condition monitoring system

CONSTRUCTION

Lee, J.H., Doel, A.P. and Walker, D.D. (2000) Adaptive secondary mirror demonstrator: construction and preliminary evaluation. Optical Engineering, 39 (4). ISSN 0091-3286

contact analysis

Muller, Matthias and Barrans, Simon (2010) Predicting and determining the contact pressure distribution in joints formed by v-band clamps. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 154-159. ISBN 9781862180932

control

Kim, S.W., Walker, D.D. and Brooks, D. (2003) Active profiling and polishing for efficient control of material removal from large precision surfaces with moderate asphericity. Mechatronics, 13. pp. 295-312. ISSN 0957-4158

CONTROLLER

Han, W.Y., Clayton, M.J. and Walker, D.D. (1996) Steps toward efficient mosaic CCD system design. Publications of the Astronomical Society of the Pacific, 108 (729). pp. 1028-1032. ISSN 0004-6280

Convolution

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2009) Interferograms analysis for wavelength scanning interferometer using convolution and fourier transform. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 33-37. ISBN 9781862180857

Coordinate metrology

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

correcting

data

Perkins, Chris J, Longstaff, Andrew P., Fletcher, Simon, Willoughby, P and Verma, Rocky (2010) Limitations of Data Handling within the Machine Tool Service environment. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 192. ISBN 9781862180932

DBMS

Deviation calibration

Liu, Xiaohong, Huang, Shujun, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2017) Full-field calibration of color camera chromatic aberration using absolute phase maps. Sensors, 17 (5). ISSN 1424-8220

Diesel Engine

DIFFRACTION

digital gap

Kenan, T. and Pislaru, Crinela (2012) Challenges related to the implementation of e-learning in higher education institutions in Libya. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 116-122. ISBN 978-1-86218-106-9

Discontinuous surface measurement

Zhang, Zonghua, Huang, Shujun, Gao, Nan, Gao, F. and Jiang, Xiang (2017) Full-Field 3D Shape Measurement of Specular Object Having Discontinuous Surfaces. In: International Conference on Optical and Photonic Engineering (icOPEN 2017), 5-7 April 2017, Singapore.

discrete wavelet transform

Su, Yang, Xu, Zhijie, Jiang, Xiang and Pickering, Jonathan (2008) Discrete wavelet transform on consumer-level graphics processing unit. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 40-47. ISBN 978-1-86218-067-3

dispersive probing

Hassan, Mothana A., Jiang, Xiang and Martin, Haydn (2012) Comparison of the fringe visibility created by zero and first order diffracted beams in a dispersive interferometer. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 110-115. ISBN 978-1-86218-106-9

Displacement

Lu, Y., Doel, A.P., Walker, D.D. and Zhao, X. (2003) Dynamic measurement of displacement with a phase-shifting technique. Optical Engineering, 42. pp. 2006-2009. ISSN 0091-3286

double-Fourier

dynamic

Lu, Y., Doel, A.P., Walker, D.D. and Zhao, X. (2003) Dynamic measurement of displacement with a phase-shifting technique. Optical Engineering, 42. pp. 2006-2009. ISSN 0091-3286

E-learning

E-learning Libyan ICT digital gap e-learning barriers

Kenan, T. and Pislaru, Crinela (2012) Challenges related to e-learning implementation in higher education institutions in Libya. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 151. ISBN 978-1-86218-106-9

e-learning barriers

edge control

Edge detection

Xiao, Shaojun, Xie, F., Blunt, Liam, Scott, Paul J. and Jiang, Xiang (2006) Feature extraction for structured surface based on surface networks and edge detection. Materials Science in Semiconductor Processing, 9 (1-3). pp. 210-214. ISSN 1369-8001

efficient

Electrical & Electronic

Swinyard, B., Auriacombe, O., Bradshaw, T., Brooks, D., Charlton, J., Crook, M., Davies, G., Ellison, B., Emes, M., Friend, J., Gerber, D., Gray, C., Henry, M., Hunt, T., Linfield, E., Navarathinam, N., Parks, S., Rawlings, T., Rea, S., Saunders, C., Savini, G., Tun, S.M., Walker, D.D., Wang, H. and Winter, B. (2016) The LOw Cost Upper atmosphere Sounder: the "Elegant Breadboard" programme. In: Millimeter Waves and THz Technology Workshop.

electrical drives

energy harvesting

Engineering

Environmental Disturbance

epi-illumination

evaluation

Lee, J.H., Doel, A.P. and Walker, D.D. (2000) Adaptive secondary mirror demonstrator: construction and preliminary evaluation. Optical Engineering, 39 (4). ISSN 0091-3286

Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2009) Evaluation Of Fretting Wear On The Femoral Stem Surface. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco.

Exhaust Acoustics

expert system

Extensibility

extremely large telescope

far-infrared (far-IR)

Fast sampling

Fatigue

Radhi, H.E. and Barrans, Simon (2010) Finite Element Analysis of Effect of Weld Toe Radius and Plate Thickness on Fatigue Life of Butt Welded Joint. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 60-64. ISBN 9781862180932

FEA

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2008) Novel and efficient thermal error reduction strategy for machine tool performance improvement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 15-22. ISBN 978-1-86218-067-3

Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, Simon and Pislaru, Crinela (2008) Simulation of the structural elements of a three axis VMC for machine tool error compensation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 23-27. ISBN 978-1-86218-067-3

feature parameters

Blunt, Liam and Scott, Paul J. (2012) Characterisation of structured geometry surfaces features on micro and nano scale surfaces. International Journal of Nanomanufacturing, 8 (5/6). pp. 359-371. ISSN 1746-9392

femoral stem

Brown, L., Zhang, H. and Blunt, Liam (2009) Investigation of a possible wear mechanism at the cement head interface in hip resurfacing arthroplasty. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco. (Submitted)

FFT

fibre Bragg grating

Jiang, Xiang, Lin, D., Blunt, Liam, Zhang, W. and Zhang, L. (2006) Investigation of some critical aspects of on-line surface measurement by a wavelength-division-multiplexing technique. Measurement Science and Technology, 17. pp. 483-487. ISSN 0957-0233

fibre interferometer vibration stabilised

Jiang, Xiang, Martin, Haydn and Wang, Kaiwei (2007) Vibration compensating beam scanning interferometer for surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield.

Martin, Haydn and Jiang, Xiang (2008) Stabilising fibre interferometers. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 75-80. ISBN 978-1-86218-067-3

filtering

Finite element analysis

finite element method

finite element model

FISICA

Fixture Design Optimisation

Yeung, Ka Yiu and Chen, Xun (2007) 3D freeform component fixture design optisation using a genetic algorithm. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Flexible

form

Form error

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

free-form

Walker, D.D. and Hutchinson, M. (2005) Matching Manufacturing and Measurements-solutions for Free-Form Surfaces. In: UNSPECIFIED.

Freeform

Walker, D.D., Beaucamp, A.T.H., Doubrovski, V., Dunn, C., Freeman, R., Hobbs, G., McCavana, G., Morton, R., Riley, D., Simms, J. and Wei, X. (2005) New Developments in the Precessions process for Manufacturing Freeform, Large-optical, and Precision-mechanical Surfaces. SPIE - International Society for Optical Engineering. Proceedings, 6148. p. 614805. ISSN 0277-786X

Fretting wear

fretting wear simulation

Zhang, H., Brown, L. and Blunt, Liam (2006) Investigation of characteristics at the stem cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Friction

Zhang, Po, Lu, Wenlong, Liu, Xiaojun, Zhai, Wenzheng, Zhou, Mingzhuo and Zeng, Wenhan (2018) Torsional fretting and torsional sliding wear behaviors of CuNiAl against 42CrMo4 under dry condition. Tribology International, 118. pp. 11-19. ISSN 0301-679X

Friction reduction

Wilkinson, Adam, Chen, Xun and Blunt, Liam (2010) Experimentation to Reduce Friction from Novel Abrasive Tape Polishing Method. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 54-59. ISBN 9781862180932

functional surfaces

Gaussian filtering

Su, Yang, Xu, Zhijie and Jiang, Xiang (2008) Stream-Based Data Filtering for Accelerating Metrological Data Characterization. In: Proceedings of the 14th International Conference on Automation and Computing. ICAC, pp. 81-85. ISBN 978-0-9555294-2-0

Generalised Spline filter

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2009) A Generalised Linear and Nonlinear Spline filter. In: 12th International Conference on Metrology and Properties of Engineering Surfaces, 8-10 July 2009, Rzeszów, Poland. (Submitted)

Genetic Algorithm

Genetic algorithms

Radhi, H.E. and Barrans, Simon (2012) Comparison between multiobjective optimization algorithms. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 129-135. ISBN 978-1-86218-106-9

Geometrical Product Specifications (GPS)

Qi, Qufen, Blunt, Liam, Scott, Paul J. and Jiang, Xiang (2010) Modeling of the concepts in ISO standards for profile surface texture. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 172-176. ISBN 9781862180932

GLASS

Tonnellier, X., Morantz, P., Shore, P., Baldwin, A., Evans, R. and Walker, D.D. (2007) Subsurface damage in precision ground ULE (R) and Zerodur (R) surfaces. Optics Express, 15 (19). pp. 12197-12205. ISSN 1094-4087

GPS

graphic processing unit

Graphics process unit

grinding

Alabed, Asmaa and Chen, Xun (2009) Development of a knowledge warehouse for grinding. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 99-104. ISBN 9781862180857

grolish

ground

hard disk

Yang, Shuming and Jiang, Xiang (2006) The roughness measurement of the super-smooth surface of hard disks. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-7.

hardness

hybrid

Walker, D.D., Soon, Y. and Sug-Whan, K. (2003) Novel hybrid stylus for nanometric profilometry for large optical surfaces. Optics Express, 11 (15). pp. 1793-1798. ISSN 1094-4087

image analysis

Imaging and sensing

Liu, Yue, Huang, Shujun, Zhang, Zonghua, Gao, Nan, Gao, Feng and Jiang, Xiang (2017) Full-field 3D shape measurement of discontinuous specular objects by direct phase measuring deflectometry. Scientific Reports, 7 (10293). ISSN 2045-2322

influence function

integrated control

Integrated modelling

integrated optics

Kumar, Prashant, Martin, Haydn, Maxwell, Graeme and Jiang, Xiang (2012) Design and Development of a Self Calibrated Optical Chip Interferometer for High Precision On-line Surface Measurement. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 14-19. ISBN 978-1-86218-106-9

Kumar, Prashant, Martin, Haydn, Maxwell, Graeme and Jiang, Xiang (2012) Design and development of a self calibrated optical chip interferometer for high precision on-line surface measurement. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 152. ISBN 978-1-86218-106-9

Interatomic Potentials

Interface

interference fringes

interferometer

interferometry

Tang, Dawei, Gao, Feng and Jiang, Xiangqian (2014) On-line surface inspection using cylindrical lens-based spectral domain low-coherence interferometry. Applied Optics, 53 (24). pp. 5510-5516. ISSN 1559-128X

inverse problem

IO coupler

ISO standards

key parameter

Arief, Ikhwan and Chen, Xun (2010) Key Parameters In Loose Abrasive Machining. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 1-5. ISBN 9781862180932

Knowledge management

knowledge structure

Knowledge-based System

large machined surface

Large-optical

Laser

Yang, H.S., Kim, S.W. and Walker, D.D. (2003) A novel laser datum series for nanometric profilometry for large optical surfaces. Optics Express, 11 (6). pp. 624-631. ISSN 1094-4087

Laser diodes

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2005) Investigation into the accuracy of a proposed laser diode based multilateration machine tool calibration system. Journal Paper of Physics: Conference Series, 13. pp. 398-401. ISSN 1742-6588

laser interferometry

Laser scanning

LCD (liquid crystal display) screen

Liu, Xiaohong, Huang, Shujun, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2017) Full-field calibration of color camera chromatic aberration using absolute phase maps. Sensors, 17 (5). ISSN 1424-8220

Lean manufacturing

Libyan ICT

Line singularities

Ma, J.W., Jiang, Xiang and Scott, Paul J. (2005) Complex ridgelets for shift invariant characterizaion of surface topography with line singularities. Physics Letters A, 344. pp. 423-431. ISSN 0375-9601

LONG-TRACE-PROFILER

Loose abrasive machining

M-estimation

Machine performance

Longstaff, Andrew P. (2002) Methods of evaluation of the positioning capability of Cartesian and non-Cartesian machines. Doctoral thesis, University of Huddersfield.

machine tool

Machine tool accuracy

Machine tool calibration automation

Parkinson, S., Longstaff, Andrew P., Crampton, Andrew, Fletcher, Simon, Allen, Gary and Myers, Alan (2012) Automation as a Solution for Machine Tool Calibration Planning. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 57-62. ISBN 978-1-86218-106-9

machine tool non-rigid errors

Machine Tool Spindle

Clough, David A, Fletcher, Simon and Longstaff, Andrew P. (2010) Non-contact measurement and analysis of machine tool spindles. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 189. ISBN 9781862180932

Machinery

Longstaff, Andrew P. (2002) Methods of evaluation of the positioning capability of Cartesian and non-Cartesian machines. Doctoral thesis, University of Huddersfield.

Machinery Tools

Longstaff, Andrew P. (2002) Methods of evaluation of the positioning capability of Cartesian and non-Cartesian machines. Doctoral thesis, University of Huddersfield.

magnetic storage

Manufacturing

Walker, D.D. and Hutchinson, M. (2005) Matching Manufacturing and Measurements-solutions for Free-Form Surfaces. In: UNSPECIFIED.

Matching

Walker, D.D. and Hutchinson, M. (2005) Matching Manufacturing and Measurements-solutions for Free-Form Surfaces. In: UNSPECIFIED.

material removal

material removal characteristic

Materials Science

mathematical morphology

MATLAB

Measurement

Ibrahim, S M, Bills, Paul J. and Allport, John (2017) Improving the Capacity of Institutions to strengthen the Management of National Oil and Gas Resources. In: 224th International Academic Conference on Engineering, Technology and Innovations (IACETI), 23-24 August 2017, Mecca, Saudi Arabia.

Lu, Y., Doel, A.P., Walker, D.D. and Zhao, X. (2003) Dynamic measurement of displacement with a phase-shifting technique. Optical Engineering, 42. pp. 2006-2009. ISSN 0091-3286

Measurements

Walker, D.D. and Hutchinson, M. (2005) Matching Manufacturing and Measurements-solutions for Free-Form Surfaces. In: UNSPECIFIED.

MEMS microstructure surface wavelet

Zhu, Hao, Xiao, Shaojun, Jiang, Xiang and Blunt, Liam (2008) MEMS microstructured surface characterisation based on wavelet transform techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 87-92. ISBN 978-1-86218-067-3

mesenchymal stem cells

metrology

Metrology and measurement

metrology uncertainty surface texture parameter

Brennan, James K., Jiang, Xiang, Crampton, Andrew and Leach, Richard K. (2006) Propagation of measurement uncertainty for surface texture parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Micro finishing

micro-scale features extraction

microcarriers

Micromachining

micromanufacturing

mid-spatial frequency

Yu, G., Li, H. and Walker, D.D. (2011) Removal of Mid Spatial-Frequency Features in Mirror Segments. Journal of the European Optical Society: Rapid Publications, 6 (ARTN 1). ISSN 1990-2573

MIDDLE

Minimum Depth of Cut

Oluwajobi, Akinjide O. and Chen, Xun (2010) On Minimum Depth of Cut in nanomachining. In: Advances in manufacturing technology. Durham University and Glasgow Caledonian University, Durham, pp. 174-179. ISBN 9781905866519

Minimum zone

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

Mirror

Lee, J.H., Doel, A.P. and Walker, D.D. (2000) Adaptive secondary mirror demonstrator: construction and preliminary evaluation. Optical Engineering, 39 (4). ISSN 0091-3286

Mirrors

Lee, J.H., Doel, A.P. and Walker, D.D. (2000) Adaptive secondary mirror demonstrator: construction and preliminary evaluation. Optical Engineering, 39 (4). ISSN 0091-3286

missing data

modeling

modelling

Modelling simulation scale roller rig critical speed

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Dynamic simulation of a roller rig. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 51-56. ISBN 978-1-86218-106-9

Molecular Dynamics

Morphological feature

morphological filters

MOSA

Multi-objective optimization

Multi-sensor

multilateration

multiple scattering effect

Gao, F., Coupland, J. M. and Petzing, J. (2006) V-groove measurement with white light interferometry. In: Photon06, 4-7 September, 2006, Manchester.

multiplexed fibre interferometer

multiplexed fibre interferometer stabilisation surface measurement

Martin, Haydn (2006) A self stabilising multiplexed interferometer for on-line surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Nanomachining

nanomanufacturing

Nanometer removal

nanotechnology

Nigeria

Non-Contact Measurement

Non-overlap subaperture stitching

Wu, Xin, Yu, Yingjie, Zeng, Wenhan, Qi, Te, Chen, Mingyi and Jiang, Xiangqian (2017) Non-overlap subaperture interferometric testing for large optics. Optics Communications, 396. pp. 191-198. ISSN 0030-4018

Nonlinear filter

novel

Walker, D.D., Soon, Y. and Sug-Whan, K. (2003) Novel hybrid stylus for nanometric profilometry for large optical surfaces. Optics Express, 11 (15). pp. 1793-1798. ISSN 1094-4087

Yang, H.S., Kim, S.W. and Walker, D.D. (2003) A novel laser datum series for nanometric profilometry for large optical surfaces. Optics Express, 11 (6). pp. 624-631. ISSN 1094-4087

offline simulation

Oil and gas

on-line surface measurement

Online/In-Process Measurement

Optical inspection

Optical metrology

Optical sensors

Optics

Walker, D.D., Freeman, R., Morton, R., McCavana, G. and Beaucamp, A. (2006) Use of the 'Precessions'(TM) process for prepolishing and correcting 2D & 2 1/2 D form. Optics Express, 14 (24). pp. 11787-11795. ISSN 1094-4087

orthogonal cutting

Parallel computation

parallel processing

Pareto

Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X

parts

paste polishing

PEMA

Phase calculation

Phase deflectometry

phase shifting

Physical Sciences

Han, W.Y., Clayton, M.J. and Walker, D.D. (1996) Steps toward efficient mosaic CCD system design. Publications of the Astronomical Society of the Pacific, 108 (729). pp. 1028-1032. ISSN 0004-6280

Lee, J.H., Bigelow, B.C., Walker, D.D., Doel, A.P. and Bingham, R.G. (2000) Why adaptive secondaries? Publications of the Astronomical Society of the Pacific, 112 (767). pp. 97-107. ISSN 0004-6280

Physics

Piezoelectric Tranducer

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2010) Vibration compensation of wavelength scanning interferometer for in-process surface inspection. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 148-153. ISBN 9781862180932

plasticity

ploughing

polish

Polishing

Walker, D.D., Beaucamp, A.T., Brooks, D., Doubrovski, V., Cassie, M.D., Dunn, C., Freeman, R.R., King, A., Libert, M., McCavana, G., Morton, R., Riley, D. and Simms, J. (2004) New results from the Precessions polishing process scaled to larger sizes. SPIE - International Society for Optical Engineering. Proceedings, 5494. pp. 71-80. ISSN 0277-786X

Walker, D.D., Freeman, R., Hobbs, G., King, A., McCavana, G., Morton, R., Riley, D. and Simms, J. (2005) Zeeko 1 metre polishing system. In: UNSPECIFIED.

Polynomial fitting

pre-polishing

Precessions

Precision machining

Precision-mechanical

process

process.smoothing

profile measurement

pull out test

Quadric surfaces

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

Radial basis function

Radio energy modelling

Hughes, Jack Bryan, Lazaridis, Pavlos, Glover, Ian and Ball, Andrew (2017) Opportunities for Transmission Power Control Protocols in Wireless Sensor Networks. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601

Radon transform

rail vehicle dynamics

railway vehicle

real surface metrology

real time

Reference interferometer

Reflection Suppression

Removal

resurfacing

Reuse

Reverse engineering

Ridgelets

robot

Robust filter

roughness CCI (Coherence Correlation Interferometer)

rubbing

Science & Technology

Han, W.Y., Clayton, M.J. and Walker, D.D. (1996) Steps toward efficient mosaic CCD system design. Publications of the Astronomical Society of the Pacific, 108 (729). pp. 1028-1032. ISSN 0004-6280

Lee, J.H., Bigelow, B.C., Walker, D.D., Doel, A.P. and Bingham, R.G. (2000) Why adaptive secondaries? Publications of the Astronomical Society of the Pacific, 112 (767). pp. 97-107. ISSN 0004-6280

secondary

Lee, J.H., Doel, A.P. and Walker, D.D. (2000) Adaptive secondary mirror demonstrator: construction and preliminary evaluation. Optical Engineering, 39 (4). ISSN 0091-3286

segment

segmentation

segments

Yu, G., Li, H. and Walker, D.D. (2011) Removal of Mid Spatial-Frequency Features in Mirror Segments. Journal of the European Optical Society: Rapid Publications, 6 (ARTN 1). ISSN 1990-2573

Self-adaptive differential evolution

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

Shift invariance

simulation

smooth

snakes

solutions

Walker, D.D. and Hutchinson, M. (2005) Matching Manufacturing and Measurements-solutions for Free-Form Surfaces. In: UNSPECIFIED.

spatial resolution

Spectrum analysis

Speculur object 3D measurement

Spindle Error

Square Zernike polynomial

Stabilised Interferometer

stability

stem cement interface

structured surfaces

stylus profilometry

Subaperture distribution pattern

surface

Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X

Walker, D.D., Soon, Y. and Sug-Whan, K. (2003) Novel hybrid stylus for nanometric profilometry for large optical surfaces. Optics Express, 11 (15). pp. 1793-1798. ISSN 1094-4087

Surface characterisation

Surface characterization

surface form

Surface Measurement

Jiang, Xiang (2009) The evolution of surfaces and their measurement. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia. (Unpublished)

surface metrology

Surface network

Surface reconstruction

surface roughness

surface roughness measurement

Gao, F., Coupland, J. M. and Petzing, J. (2006) V-groove measurement with white light interferometry. In: Photon06, 4-7 September, 2006, Manchester.

Surface segmentation

surface texture

surface topography

Surfaces

Walker, D.D. and Hutchinson, M. (2005) Matching Manufacturing and Measurements-solutions for Free-Form Surfaces. In: UNSPECIFIED.

Walker, D.D., Soon, Y. and Sug-Whan, K. (2003) Novel hybrid stylus for nanometric profilometry for large optical surfaces. Optics Express, 11 (15). pp. 1793-1798. ISSN 1094-4087

Yang, H.S., Kim, S.W. and Walker, D.D. (2003) A novel laser datum series for nanometric profilometry for large optical surfaces. Optics Express, 11 (6). pp. 624-631. ISSN 1094-4087

Sustainable manufacturing

swing arm profilometer

system

Walker, D.D., Freeman, R., Hobbs, G., King, A., McCavana, G., Morton, R., Riley, D. and Simms, J. (2005) Zeeko 1 metre polishing system. In: UNSPECIFIED.

System calibration

Systematic errors

Liu, Xiaohong, Huang, Shujun, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2017) Full-field calibration of color camera chromatic aberration using absolute phase maps. Sensors, 17 (5). ISSN 1424-8220

technique

Lu, Y., Doel, A.P., Walker, D.D. and Zhao, X. (2003) Dynamic measurement of displacement with a phase-shifting technique. Optical Engineering, 42. pp. 2006-2009. ISSN 0091-3286

Technology

TELESCOPE

texture

Thermal deformations

Thermal error

three-body abrasion

tilt

tool geometry

Torsional fretting

Torsional sliding

track-based sensors

Training

Transmission power control

two-body abrasion

Ultrasonic

uniform sampling

United States

Use

V-band clamp

V-band retainer

V-groove measurement

Gao, F., Coupland, J. M. and Petzing, J. (2006) V-groove measurement with white light interferometry. In: Photon06, 4-7 September, 2006, Manchester.

vehicle-based sensors

Vibration

Vibration compensation

wavelength scanning

Wavelength Scanning Interferometer

wavelength-division- multiplexing

Wear

wear debris

Wear mechanism

White light interferometry

Gao, F., Coupland, J. M. and Petzing, J. (2006) V-groove measurement with white light interferometry. In: Photon06, 4-7 September, 2006, Manchester.

Wireless sensor networks

Wolfe prune

Workbench

Zeeko

Walker, D.D., Freeman, R., Hobbs, G., King, A., McCavana, G., Morton, R., Riley, D. and Simms, J. (2005) Zeeko 1 metre polishing system. In: UNSPECIFIED.

This list was generated on Thu Nov 21 07:50:54 2024 UTC.