![]() | Up a level |
Abdul-Rahman, Hussein S., Lou, Shan, Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2016) Freeform texture representation and characterisation based on triangular mesh projection techniques. Measurement, 92. pp. 172-182. ISSN 0263-2241
Abdul-Rahman, Hussein S., Jiang, Xiangqian and Scott, Paul J. (2012) Freeform surface filtering using the lifting wavelet transform. Precision Engineering, 37 (1). pp. 187-202. ISSN 01416359
Abouelatta, O.B., El-Bediwi, A., Sakrana, A., Jiang, Xiang and Blunt, Liam (2006) Surface integrity of provisional resin materials. Measurement Science and Technology, 17 (3). pp. 584-591. ISSN 0957-0233
Bills, Paul J., Racasan, Radu, Hart, A.J., Skinner, J., Jiang, Xiang and Blunt, Liam (2012) Using metrology to bridge the gap in understanding between engineering and biological failure: the case of metal-on-metal hip replacements. In: 1st Annual EPSRC Manufacturing the Future Conference, 19th-20th September 2012, Loughborough, UK.
Bills, Paul J., Lou, Shan and Jiang, Xiang (2012) Development of morphological filtering method for specification and characterisation of hip replacement taper junctions. In: 12th International Conference of the European Society for Precision Engineering and Nanotechnology, 4th-8th June 2012, Stockholm, Sweden.
Bills, Paul J., Racasan, Radu, Underwood, R.J., Cann, P., Skinner, J., Hart, A.J., Jiang, Xiang and Blunt, Liam (2012) Volumetric wear assessment of retrieved metal-on-metal hip prostheses and the impact of measurement uncertainty. Wear, 274. pp. 212-219. ISSN 0043-1648
Bills, Paul J., Underwood, R.J., Sayles, R.S., Cann, P.M., Hart, A, Blunt, Liam and Jiang, Xiang (2011) Taper Wear in Large Head Metal-on-Metal Hips. In: International Conference on BioTribology 2011, 18th - 21th September 2011, Imperial College. (Unpublished)
Bills, Paul J., Underwood, R.J., Cann, P., Hart, A, Jiang, Xiangqian and Blunt, Liam (2010) What is required to measure the wear of explanted metal-on-metal hips? In: British Orthopaedic Research Society Annual Meeting, 12th-13th July 2010, Cardiff University.
Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2009) Precision and Nanoscale Surface Metrology. In: International Moulded Optics Conference,, 19-20th Nov 2009, Breman Germany. (Unpublished)
Blunt, Liam, Jiang, Xiang, Zeng, Wenhan and Asim, Taimoor (2009) A new way to evaluate steel sheet surfaces. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia. (Unpublished)
Blunt, Liam, Bills, Paul J., Jiang, Xiang, Hardacker, Catherine and Chakrararty, Gautum (2009) The role of tribology and metrology in the latest development of bio-materials. Wear, 266 (3-4). pp. 424-431. ISSN 0043-1648
Blunt, Liam, Zhang, Hongyu, Barrans, Simon, Jiang, Xiang and Brown, Leigh (2008) What results in fretting wear on polished femoral stems. Tribology International, 42 (11). pp. 1605-1614. ISSN 0301-679X
Blunt, Liam, Bills, Paul J., Jiang, Xiang and Chakrabarty, G. (2008) Improvement in the assessment of wear of total knee replacements using coordinate-measuring machine techniques. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 222 (3). pp. 309-318. ISSN 0954-4119
Bills, Paul J., Blunt, Liam and Jiang, Xiang (2007) Development of a technique for accurately determining clinical wear in explanted total hip replacements. Wear, 263 (7-12). pp. 1133-1137. ISSN 0043-1648
Blunt, Liam, Jiang, Xiang, Leach, Richard K., Harris, Peter M. and Scott, Paul J. (2007) The development of user-friendly software measurement standards for surface topography software assessment. Wear, 264 (5-6). pp. 389-393. ISSN 0043-1648
Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2007) A New Approach to Surface Metrology - Structured Surfaces. In: Proceedings of the 7th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen) - Bremen, Germany, 2007. euspen, Bremen, pp. 254-257. ISBN 978-0-9553082-2-2
Brennan, James K., Jiang, Xiang, Crampton, Andrew and Leach, Richard K. (2006) Propagation of measurement uncertainty for surface texture parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.
Bills, Paul J., Blunt, Liam and Jiang, Xiang (2006) A metrology solution for determination of form deviation and wear in orthopaedic joint replacements. In: 33rd Leeds-Lyon Symposium on Tribology, Tuesday 12th - Friday 15th September 2006, Trinity and all Saints College, Leeds. (Unpublished)
Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2005) Advances in micro and nano-scale surface metrology. Key Engineering Materials, 295-29. pp. 431-436. ISSN 1013-9826
Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Approximation of surface roughness profiles and parameters. In: International Conference on Advanced Mathematical and Computational Tools in Metrology (AMCTM 2005), 27–29 June, 2005, Instituto Português da Qualidade, Caparica, Portugal. (Unpublished)
Blunt, Liam, Leach, Richard K., Scott, Paul J., Harris, Peter M., Xiao, Shaojun, Li, T., Parkin, G. and Jiang, Xiang (2005) Development of “softgauges” for surface profile metrology. In: 5th Euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)
Blunt, Liam, Xiao, Shaojun, Jiang, Xiang and Scott, Paul J. (2005) Geometrical characterisation of MST and microfluidic devices using novel surface metrology techniques. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)
Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Reconstruction of continuous surface profiles from discretely sampled data. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)
Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Approximation of surface texture profiles. Journal of Physics, Series. pp. 264-267. ISSN 1742-6596
Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Propagation of uncertainty in discretely sampled surface roughness profiles. Advanced mathematical and computational tools in metrology VII. pp. 271-275.
Bills, Paul J., Brown, L., Jiang, Xiang and Blunt, Liam (2005) A metrology solution for the orthopaedic industry. Journal of Physics, Series. pp. 316-319. ISSN 1742-6596
Blunt, Liam, Jiang, Xiang, Xiao, Shaojun and Scott, Paul J. (2004) The use of interferometry and image analysis techniques for metrology of MST devices. In: 8th International Symposium on Measurement and Quality Control in Production, 12th-15th October, 2004, Erlangen, Germany. (Unpublished)
Brennan, James K., Mason, John C., Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2004) Approximation of surface texture profiles and parameters. In: 4th International Conference of the European Society for Precision Engineering and Nanotechnology, euspen, 30th May - 3rd June 2004, Scottish Exhibition and Conference Centre (SECC), Glasgow. (Unpublished)
Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2003) Advances in micro and nano-scale surface metrology. In: ISMTII 2003, The Sixth International Symposium on Measurement Technology and Intelligent Instruments, 28 November - 1 December 2003, Academic Building, Hong Kong University of Science and Technology, Kowloon, Hong Kong.
Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2003) Future developments in surface metrology. In: Advanced Techniques for Assessment Surface Topography. Kogan Page, London, pp. 339-347. ISBN 1903996112
Cui, C.uk, Li, T., Blunt, L.A., Jiang, X., Huang, H., Ye, R. and Fan, W. (2013) The Assessment of Straightness and Flatness Errors Using Particle Swarm Optimization. Procedia CIRP, 10. pp. 271-275. ISSN 2212-8271
Ding, Hao, Qi, Qunfen, Scott, Paul J. and Jiang, Xiang (2015) An ANOVA method of evaluating the specification uncertainty in roughness measurement. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK. ISBN 978-0-9566790-5-5
Ding, Hao, Scott, Paul J. and Jiang, X. (2015) A Criterion for Comparing Measurement Results and Determining Conformity with Specifications. Procedia CIRP, 27. pp. 143-148. ISSN 2212-8271
Ding, Hao, Scott, Paul J. and Jiang, Xiang (2014) A criterion for comparing measurement results and determining conformity with specifications. In: 13th CIRP Conference on Computer Aided Tolerancing, 11th-14th May 2014, Hangzhou, China. (Unpublished)
Ding, Hao, Scott, Paul J. and Jiang, Xiang (2013) Inverse problems of measurement with application on specification of surface profile. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 229. ISBN 9781862181212
Ding, Hao, Scott, J. Paul and Jiang, Xiang (2013) Relational Structure of Measurement with Application on Specification of Freeform Surface. In: Proceedings of the The 11th International Symposium on Measurement Technology and Intelligent Instruments. ISMTII 2013 . Apprimus Wissenschaftsver, Aachen and Braunschweig, Germany. ISBN 978-3-86359-138-0
Elrawemi, Mohamed, Muhamedsalih, Hussam, Blunt, Liam, Fleming, Leigh, Martin, Haydn and Jiang, Xiang (2014) Comparative study between online and offline defect assessment methods for roll to roll flexible PV modules. In: 4th International Conference on Nanomanufacturing (nanoMan2014), 8-10 July, Bremen, Germany.
Edwards, R.S., Sophian, A., Dixon, S., Tian, Gui Yun and Jiang, Xiang (2006) Dual EMAT and PEC non-contact probe: applications to defect testing. NDT & E International, 39 (1). pp. 45-52. ISSN 0963-8695
Foster, Katie, Bills, Paul J., Blunt, Liam, Jiang, Xiang and Leary, Richard (2015) The use of additive manufacturing for the presentation of ballistic toolmark evidence in court. In: 7th European Academy of Forensic Science Conference, 6-11 September 2015, Prague, Czech Republic.
Feng, Gao, Wang, Xuanze and Jiang, Xiang (2012) A Digital Phase-Lock Method for AOD Scanning Measurement System. International Journal of Mechanic Systems Engineering, 2 (1). pp. 42-47. ISSN 2225-7403
Gao, F. and Jiang, Xiang (2017) Environmental robust interferometry for online/in-process surface inspection. In: The 2nd International Forum on Surface and Microscopy, 7-9 August 2017, Harbin, China. (Unpublished)
Gao, F., Xu, Yongjia, Ren, Hongyu, Zhang, Zonghua and Jiang, Xiang (2016) A novel camera calibration method for deflectometry system. In: 16th International Conference and Exhibition, 30th May-3rd June 2016, Nottingham, UK.
Gao, F., Muhamedsalih, Hussam, Tang, Dawei, Elrawemi, Mohamed, Blunt, Liam, Jiang, Xiang, Edge, Steven, Bird, David and Hollis, Philip (2015) In-situ defect detection systems for R2R flexible PV films. In: ASPE 2015 Summer Topical Meeting. American Society for Precision Engineering, Colarado, USA, pp. 44-49. ISBN 978-1-887706-68-1
Gao, Feng, Muhamedsalih, Hussam, Tang, Dawei, Elrawemi, Mohamed, Blunt, Liam, Jiang, Xiang, Edge, Steven, Bird, David and Hollis, Philip (2015) In-situ defect detection systems for R2R flexible PV barrier films. In: International Conference on Optical Instrument and Technology (OIT’2015), 17th-19th May, Beijing, China.
Gao, Feng, Muhamedsalih, Hussam, Elrawemi, Mohamed, Blunt, Liam, Jiang, Xiang, Edge, Steven, Bird, David and Hollis, Philip (2014) A flexible PV barrier films defects detection system for in-situ R2R film processing. In: Special Interest Group Meeting: Structured Freeform Surfaces 2014 Programme, 19-20 Nov 2014, Padova, Italy.
Gao, F., Tang, Dawei and Jiang, Xiang (2013) White Light Spectral Interferometry for Real Time Surface Profile Measurement. In: ASPEN 2013, 12-15, November 2013, Taipei, Taiwan. (Unpublished)
Gao, F., Muhamedsalih, Hussam and Jiang, Xiang (2012) In-Process Fast Surface Measurement Using Wavelength Scanning Interferometry. Advanced Materials Research, 622-62. pp. 357-360. ISSN 1662-8985
Gao, F., Muhamedsalih, Hussam and Jiang, Xiang (2012) In-process fast surface measurement using wavelength scanning interferometry. In: 2012 International Conference on Manufacturing and Optimization, September 15-16, 2012, Beijing, China.
Gao, F., Muhamedsalih, Hussam and Jiang, Xiangqian (2012) Surface and thickness measurement of a transparent film using wavelength scanning interferometry. Optics Express, 20 (19). p. 21450. ISSN 1094-4087
Gao, F., Jiang, Xiang, Muhamedsalih, Hussam and Martin, Haydn (2011) Wavelength scanning interferometry for measuring transparent films of the fusion targets. In: 13th International Conference on Metrology and Properties of Engineering Surfaces 2011, 12th - 15th April 2011, Twickenham, UK.
Gao, F., Jiang, Xiang, Muhamedsalih, Hussam and Martin, Haydn (2010) Wavelength Scanning Interferometry for Thin Film Analysis of Fusion Target. In: 3rd European Target Fabrication Workshop, 30 September-1 October, Oxford. (Unpublished)
Gao, F., Wang, Kaiwei and Jiang, Xiang (2009) A high speed scanning heterodyne interferometer for in process surface measurement. In: Proceedings of the euspen International Conference – San Sebastian - June 2009. European Society for Precision Engineering & Nanotechnology, San Sebastian, Spain. ISBN 13:978-0-9553082-6-0
Gao, F., Jiang, Xiang and Blunt, Liam (2009) Automated ballistic and tool mark identification. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Hassan, Mothana A., Martin, Haydn and Jiang, Xiangqian (2017) Development of a spatially dispersed short-coherence interferometry sensor using diffraction grating orders. Applied Optics, 56 (22). pp. 6391-6397. ISSN 1559-128X
Hassan, Mothana A., Martin, Haydn and Jiang, Xiang (2015) A single-shot line-scanning spatially dispersed short coherence interferometer using Fourier transform profilometry. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK. ISBN 978-0-9566790-5-5
Huang, Shujun, Xie, Lili, Wang, Zhangying, Zhang, Zonghua, Gao, Feng and Jiang, Xiangqian (2015) Accurate projector calibration method by using an optical coaxial camera. Applied Optics, 54 (4). pp. 789-795. ISSN 0003-6935
Hassan, Mothana A., Martin, Haydn and Jiang, Xiangqian (2014) Surface profile measurement using spatially dispersed short coherence interferometry. Surface Topography: Metrology and Properties, 2 (2). 024001. ISSN 2051-672X
Hassan, Mothana A., Martin, Haydn and Jiang, Xiang (2013) Investigations on measurement speed of spatially dispersed short coherence interferometer. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 43-48. ISBN 9781862181212
Hassan, Mothana A., Martin, Haydn and Jiang, Xiangqian (2013) Surface profile measurement using spatially dispersed short coherence interferometry. In: 11th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII) in Aachen and Braunschweig/Germany, 1-5 July 2013, Aachen and Braunschweig, Germany.
Hassan, Mothana A., Jiang, Xiang and Martin, Haydn (2012) Comparison of the fringe visibility created by zero and first order diffracted beams in a dispersive interferometer. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 110-115. ISBN 978-1-86218-106-9
Hassan, Mothana A., Jiang, Xiang and Haydn, Martin (2012) Fast surface metrology using wavelength scanning and dispersive white light interferometry. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 148. ISBN 978-1-86218-106-9
Jiang, Xiang, Tang, Dawei and Gao, Feng (2015) In-Situ Surface Inspection Using White Light Channelled Spectrum Interferometer. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, 2-5 March 2015, Charlotte, North Carolina, USA. (Unpublished)
Jiang, Xiangqian, Abdul-Rahman, Hussein S. and Scott, Paul J. (2013) Multi-scale freeform surface texture filtering using a mesh relaxation scheme. Measurement Science and Technology, 24 (11). ISSN 0957-0233
Jiang, Xiang, Abdul-Rahman, Hussein S. and Scott, Paul J. (2013) Lifting wavelet algorithm for freeform surface filtering using a Gaussian prediction operator. International Journal of Precision Technology, 3 (3). pp. 244-260. ISSN 1755-2060
Jiang, Xiang (2013) Editorial: Special issue on geometrical products design and their metrology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (5). p. 633. ISSN 0954-4054
Jiang, Xiang, Shore, Paul, McKeown, Pat, Whitehouse, David J. and Ruffles, Philip Charles (2012) Introduction: Ultra-precision engineering: from physics to manufacturing. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 3831-3834. ISSN 1364-503X
Jiang, Xiang and Whitehouse, David J. (2012) Precision metrology. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 4154-4160. ISSN 1364-503X
Jiang, Xiang (2012) Precision surface measurement. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 4089-4114. ISSN 1364-503X
Jiang, Xiang, Shore, Paul, McKeown, Pat, Whitehouse, David J. and Ruffles, Philip Charles (2012) Preface: Discussion Meeting Issue. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 3829-3830. ISSN 1364-503X
Jiang, Xiang and Whitehouse, David J. (2012) Technological shifts in surface metrology. CIRP Annals - Manufacturing Technology, 61 (2). pp. 815-836. ISSN 0007-8506
Jiang, Xiang, Shore, Paul, McKeown, Pat, Whitehouse, David J. and Ruffles, Phillip C. (2012) Ultra-precision engineering: from physics to manufacturing. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 3831-3834. ISSN 1364-503X
Jiang, Xiang, Lou, Shan and Scott, Paul J. (2011) Morphological method for surface metrology and dimensional metrology based on the alpha shape. Measurement Science and Technology, 23 (1). 015003. ISSN 0957-0233
Jiang, Xiang, Zeng, Wenhan and Scott, Paul J. (2011) Wavelet Analysis for the Extraction of Morphological Features for Orthopaedic Bearing Surfaces. In: Progress in Molecular and Environmental Bioengineering - From Analysis and Modeling to Technology Applications. InTech, London. ISBN 9789533072685
Jiang, Xiang, Cooper, Philip and Scott, Paul J. (2011) Freeform surface filtering using the diffusion equation. Proceedings of the Royal Society, A, 467 (2127). pp. 841-859. ISSN 1364-5021
Jiang, Xiang and Martin, Haydn (2011) Phase feedback fibre interferometer for surface profiling. International Journal of Precision Technology, 2 (2/3). pp. 246-265. ISSN 1755-2060
Jiang, Xiang (2011) In situ real-time measurement for micro-structured surfaces. CIRP Annals - Manufacturing Technology, 60 (1). pp. 563-566. ISSN 0007-8506
Jiang, Xiang, Gao, F. and Wang, Kaiwei (2010) Wavelength Scanning Interferometer for Structured Surfaces. In: ASPE Summer Topical Meeting on Precision Interferometric Metrology, 23rd - 25th June 2010, Asheville, North Carolina, USA.
Jiang, Xiang, Gao, F. and Mateboer, A. (2010) An approach of assessment for ultra-precision V-groove structured surfaces. In: Proceedings of the euspen International Conference – Delft - June 2010. European Society for Precision Engineering & Nanotechnology, Delft, Netherlands.
Jiang, Xiang, Wang, Kaiwei, Gao, F. and Muhamedsalih, Hussam (2010) Fast surface measurement using wavelength scanning interferometry with compensation of environmental noise. Applied Optics, 49 (15). pp. 2903-2909. ISSN 1559-128X
Jiang, Xiang, Zhang, Xiangchao and Scott, Paul J. (2010) Template matching of freeform surfaces based on orthogonal distance fitting for precision metrology. Measurement Science and Technology, 21 (4). 045101. ISSN 0957-0233
Jiang, Xiang (2010) Robust solution for the evaluation of stratified functional surfaces. CIRP Annals - Manufacturing Technology, 59 (1). pp. 573-576. ISSN 0007-8506
Jiang, Xiang (2009) The evolution of surfaces and their measurement. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia. (Unpublished)
Jiang, Xiang, Zeng, Wenhan, Scott, Paul J. and Ma, J.W. (2008) Linear feature extraction based on complex ridgelet transform. Wear, 264 (5-6). pp. 428-433. ISSN 0043-1648
Jiang, Xiang, Gu, Fengshou and Ball, Andrew (2008) Automotive Diesel Engine Performance and Condition Monitoring using Downpipe Acoustic Waveform Analysis. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.
Jiang, Xiang, Scott, Paul J. and Whitehouse, D.J. (2008) Wavelets and their applications for surface metrology. CIRP Annals - Manufacturing Technology, 57 (1). pp. 555-558. ISSN 0007-8506
Jiang, Xiang, Martin, Haydn and Wang, Kaiwei (2007) Vibration compensating beam scanning interferometer for surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield.
Jiang, Xiang (2007) Foreword. In: Theory and Methodology of GPS. Cheung Kong Scholars Series . Higher Education Press, Beijing. ISBN 978-7-04-022489-4
Jiang, Xiang, Scott, Paul J., Whitehouse, D.J. and Blunt, Liam (2007) Paradigm shifts in surface metrology. Part I. Historical philosophy. Proceedings of The Royal Society A Mathematical Physical and Engineering Sciences, 463 (2085). pp. 2049-2070. ISSN 1364-5021
Jiang, Xiang (2007) The economic management of geometrical products variability: the next generation GPS. In: 4th International CIRP-Sponsored Conference (DET2007) on Digital Enterprise Technology, 19-21 September 2007, University of Bath, UK. (Unpublished)
Jiang, Xiang, Zeng, Wenhan, Smith, I., Scott, Paul J. and Maletras, F. (2007) The detection of transient behaviour in environmental vibration for the Watt balance. Measurement Science and Technology, 18 (5). pp. 1487-1494. ISSN 0957-0233
Jiang, Xiang, Scott, Paul J. and Whitehouse, D.J. (2007) Freeform surface characterisation - a fresh strategy. CIRP Annals - 2007, 56 (1). pp. 553-556. ISSN 1726-0604
Jiang, Xiang, Scott, Paul J., Whitehouse, D.J. and Blunt, Liam (2007) Paradigm shifts in surface metrology. Part II. The current shift. Proceedings of the Royal Society, A, 463 (2085). pp. 2071-2099. ISSN 1364-5021
Jiang, Xiang, Wang, Kaiwei, Martin, Haydn and Yang, Shuming (2007) Surface characteristic determining apparatus. WO2007144654.
Jiang, Xiang and Mahadevan, S. (2006) Bayesian cross-entropy methodology for optimal design of validation experiments. Measurement Science and Technology, 17. pp. 1895-1908. ISSN 0957-0233
Jiang, Xiang, Lin, D., Blunt, Liam, Zhang, W. and Zhang, L. (2006) Investigation of some critical aspects of on-line surface measurement by a wavelength-division-multiplexing technique. Measurement Science and Technology, 17. pp. 483-487. ISSN 0957-0233
Jiang, Xiang and Whitehouse, D.J. (2006) Miniaturized optical measurement methods for surface nanometrology. CIRP Annals - Manufacturing Technology, 55 (1). pp. 577-580. ISSN 0007-8506
Jiang, Xiang, Wang, Kaiwei and Martin, Haydn (2006) Near common-path optical fibre interferometer for potentially fast on-line micro/nano scale surface measurement. Optical Letters, 31. pp. 3603-3605. ISSN 0146-9592
Jiang, Xiang and Whitehouse, D.J. (2005) 7th International Symposium on Measurement Technology and Intelligent Instruments. Journal of Physics, Confer. ISSN 1742-6596
Jiang, Xiang (2004) Recent advances in micro-manufacturing and micro-system. In: The 6th International Conference on Frontiers of Design and Manufacturing, 20th-24th June, 2004, Xi'an, China. (Unpublished)
Jiang, Xiang and Blunt, Liam (2004) Third generation wavelet for the extraction of morphological features from micro and nano scalar surfaces. Wear, 257. pp. 1235-1240. ISSN 0043-1648
Jiang, Xiang and Scott, Paul J. (2003) Review of surface texture work in ISO. In: 9th International Conference on Metrology and Properties of Engineering Surfaces, 10th-11th September 2003, Halmstad University, Sweden. (Unpublished)
Jiang, Xiang and Blunt, Liam (2003) Surface analysis techniques to optimise the performance of CNC machine tools. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 107-117. ISBN 9781853129902
Jiang, Xiang, Blunt, Liam and Scott, Paul J. (2002) Fundamental research into the filtration of surface texture in geometric product specification and verification. In: 3rd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering - ICME 2002, 3rd-5th July 2002, Ischia, Italy. (Unpublished)
Jiang, Xiang, Blunt, Liam and Stout, K.J. (2001) Application of the lifting wavelet to rough surfaces. Precision Engineering, 25 (2). pp. 83-89. ISSN 0141-6359
Jiang, Xiang and Blunt, Liam (2001) Advances in surface analysis technology. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 247-258. ISBN 9781853128905
Jiang, Xiang, Blunt, Liam and Stout, K.J. (2001) Lifting wavelet for three-dimensional surface analysis. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2163-2169. ISSN 0890-6955
Jiang, Xiang and Blunt, Liam (2001) Morphological assessment of orthopaedic implants using multiscalar wavelets. Wear, 250. pp. 217-221. ISSN 0043-1648
Jiang, Xiang, Blunt, Liam and Stout, K.J. (2000) Development of a lifting wavelet representation for surface characterization. Proceedings of The Royal Society A Mathematical Physical and Engineering Sciences, 456 (2001). pp. 2283-2313. ISSN 13645021
Kumar, P., Martin, H. and Jiang, X. (2016) Towards the development of a hybrid-integrated chip interferometer for online surface profile measurements. Review of Scientific Instruments, 87 (6). ISSN 0034-6748
Kumar, Prashant, Martin, Haydn, Maxwell, G and Jiang, Xiang (2014) Hybrid photonic chip interferometer for embedded metrology. In: Proceedings of SPIE: Integrated Optics: Devices, Materials, and Technologies XVIII. SPIE, California, USA, 89880N.
Kumar, Prashant, Martin, Haydn, Maxwell, G. and Jiang, Xiang (2013) Design of a dispersive lateral scanning surface profilometer. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 159-164. ISBN 9781862181212
Kumar, Prashant, Martin, Haydn, Maxwell, Graeme and Jiang, Xiang (2012) Design and Development of a Self Calibrated Optical Chip Interferometer for High Precision On-line Surface Measurement. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 14-19. ISBN 978-1-86218-106-9
Kumar, Prashant, Martin, Haydn, Maxwell, Graeme and Jiang, Xiang (2012) Design and development of a self calibrated optical chip interferometer for high precision on-line surface measurement. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 152. ISBN 978-1-86218-106-9
Kong, L., Cheung, B., Jiang, Xiang, Lee, W., To, S., Blunt, Liam and Scott, Paul J. (2010) Characterization of Surface Generation of Optical Microstructures Using a Pattern and Feature Parametric Analysis Method. Precision Engineering, 34 (4). pp. 755-766. ISSN 0141-6359
Li, Duo and Jiang, Xiang (2017) A selective kinematics error model for on-machine measurement compensation. In: University of Huddersfield PGR Conference, 17 Nov 2017, University of Huddersfield. (Unpublished)
Lou, Shan, Brown, Stephen, Sun, Wenjuan, Zeng, Wenhan, Abdul-Rahman, Hussein S., Jiang, Xiang and Scott, Paul J. (2017) Use of Morphological Method to Investigate the Influence of Surface Texture on Dimensional Measurement of Additively Manufactured Parts. In: Special Interest Group Meeting: Additive Manufacturing, 10–11 October 2017, Katholieke Universiteit Leuven (KU Leuven), BE.
Lou, Shan, Zeng, Wenhan, Pagani, Luca, Abdul-Rahman, Hussein S., Jiang, Xiang and Paul, Scott (2017) Development of Surface Characterisation Toolbox for Additive Manufactured Components: from Planar Layer Surfaces to Complex Functional Surfaces. In: EUSPEN Special Interest Group Meeting: Additive Manufacturing, 10–11 October 2017, Katholieke Universiteit Leuven (KU Leuven), BE.
Liu, Yue, Huang, Shujun, Zhang, Zonghua, Gao, Nan, Gao, Feng and Jiang, Xiang (2017) Full-field 3D shape measurement of discontinuous specular objects by direct phase measuring deflectometry. Scientific Reports, 7 (10293). ISSN 2045-2322
Lou, Shan, Zeng, Wenhan, Abdul-Rahman, Hussein S., Jiang, Xiangqian and Scott, Paul J. (2017) A Novel Surface Characterisation Strategy for the X-ray Computed Tomography Measurement of Complex Additively Manufactured Parts. In: Dimensional X-ray Computed Tomography Conference, 13 July 2017, University of Warwick, UK. (Unpublished)
Li, Duo, Ding, Fei, Jiang, Xiangqian, Blunt, Liam A. and Tong, Zhen (2017) Calibration of an interferometric surface measurement system on an ultra-precision turning lathe. In: Lamdamap 12th International Conference & Exhibition, 15-16th March 2017, Renishaw Innovation Centre, UK.
Li, Duo, Jiang, Xiangqian, Blunt, Liam, Tong, Zhen, Williamson, James and Young, Christian (2017) Development of on-machine measurement for ultra-precision machining. In: euspen's 17th International Conference, 29 May - 2 June 2017, Hannover, Germany. (Unpublished)
Liu, Xiaohong, Huang, Shujun, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2017) Full-field calibration of color camera chromatic aberration using absolute phase maps. Sensors, 17 (5). ISSN 1424-8220
Lu, Wenlong, Zhang, Po, Liu, Xiaojun, Zhai, Wenzheng, Zhou, Mingzhuo, Luo, Jian, Zeng, Wenhan and Jiang, Xiang (2017) Influence of surface topography on torsional fretting wear under flat-on-flat contact. Tribology International, 109. pp. 367-372. ISSN 0301-679X
Lou, Shan, Abdou, Hussein, Zeng, Wenhan, Jiang, Xiang and Paul, Scott (2017) A Preliminary Investigation on Surface Roughness Assessment of Complex Additive Manufactured Parts Scanned by X-ray Computed Tomography. In: 7th Conference on Industrial Computed Tomography (iCT 2017), February 7 - 9, 2017, Leuven, Belgium. (Unpublished)
Lou, Shan, Jiang, Xiang, Zeng, Wenhan, Abdul-Rahman, Hussein S. and Scott, Paul J. (2016) The use of morphological methods for the extraction of topographical features from complex additive manufactured surfaces. In: MATHMET 2016 - International Workshop on Mathematics and Statistics for Metrology, 7-9 Nov 2016, PTB-Berlin, Abbestr. 2-12, 10587 Berlin, Germany. (Unpublished)
Liu, X, Huang, Shujun, Zhang, Zonghua, Gao, Feng and Jiang, Xiang (2016) Full-field calibration and compensation of lateral chromatic aberration based on unwrapped phase. In: SPIE: Optical Metrology and Inspection for Industrial Applications IV, 12-14 October 2016, Beijing, China.
Lu, Wenlong, Qin, Yuchu, Qi, Qunfen, Zeng, Wenhan, Zhong, Yanru, Liu, Xiaojun and Jiang, Xiang (2016) Selecting a semantic similarity measure for concepts in two different CAD model data ontologies. Advanced Engineering Informatics, 30 (3). pp. 449-466. ISSN 1474-0346
Lou, Shan, Sun, Wenjuan, Zeng, Wenhan, Abdul-Rahman, Hussein S., Jiang, Xiangqian and Paul, Scott (2016) Extraction of Process Signature Features from Additive Manufactured Metal Surfaces. In: 16th International Conference on Metrology and Properties of Engineering Surfaces, 27th-29th June 2017, Gothenburg, Sweden. (Unpublished)
Lou, Shan, Jiang, Xiang, Zeng, Wenhan, Hussein, Abdul-Rahman and Paul, Scott (2016) Investigation of the compatibility of X-CT measurement data to surface topography analysis. In: Dimensional X-ray Computed Tomography Conference 2016, 9 May 2016, NPL, Teddington, London. (Unpublished)
Lou, Shan, Townsend, Andrew, Jiang, Xiang, Blunt, Liam, Zeng, Wenhan and Paul, Scott (2016) On characterising surface topography of metal powder bed fusion additive manufactured parts. In: euspen's 16th International Conference, 30 May - 3 June 2016, Nottingham, UK.
Leach, R.K., Giusca, C.L., Haitjema, H., Evans, C. and Jiang, Xiang (2015) Calibration and verification of areal surface texture measuring instruments. CIRP Annals - Manufacturing Technology, 64 (2). pp. 797-813. ISSN 0007-8506
Lou, Shan, Jiang, Xiang, Zeng, Wenhan and Paul, Scott (2015) A theoretical insight into morphological operations in surface measurement by introducing the slope transform. Journal of Zhejiang University Science A, 16 (5). pp. 395-403. ISSN 1673-565X
Lou, Shan, Jiang, Xiang, Zeng, Wenhan, Abdul-Rahman, Hussein S. and Paul, Scott (2015) From planar surfaces based on lattices to freeform surfaces based on triangular meshes: an advanced extension of the areal motif method. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, 2-5 March 2015, Charlotte, North Carolina, USA. (Unpublished)
Lan, Xiangqi, Jiang, Xiang, Zeng, Wenhan and Blunt, Liam (2015) Construct Surface Characterization System by Assembling Functional Components Dynamically. Procedia CIRP, 27. pp. 198-201.
Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2014) Morphological filters for functional assessment of roundness profiles. Measurement Science and Technology, 25 (6). 065005. ISSN 0957-0233
Lou, Shan, Jiang, Xiang, Zeng, Wenhan and Scott, Paul J. (2014) Slope transform: a theoretical insight into morphological operations in surface measurement. In: 13th CIRP Conference on Computer Aided Tolerancing, 11-14 May 2014, Hangzhou, China.
Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2014) Applications of Morphological Operations in Surface Metrology and Dimensional Metrology. Journal of Physics: Conference Series, 483. 012020. ISSN 1742-6596
Lu, Wenlong, Zhang, Gengpei, Liu, Xiaojun, Zhou, Liping, Chen, Liangzhou and Jiang, Xiang (2014) Prediction of Surface Topography at the End of Sliding Running-In Wear Based on Areal Surface Parameters. Tribology Transactions, 57 (3). pp. 553-560. ISSN 1040-2004
Lou, Shan, Jiang, Xiang and Scott, Paul J. (2013) Geometric computation theory for morphological filtering on freeform surfaces. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 469 (2159). p. 20130150. ISSN 1364-5021
Li, Tukun, Blunt, Liam A., Jiang, Xiangqian and Zeng, Wenhan (2013) An Information Model for Surface Metrology. Procedia CIRP, 10. pp. 251-258. ISSN 2212-8271
Lou, Shan, Jiang, Xiang and Scott, Paul J. (2013) Identifying and Characterizing Micro-machining Signatures on Freeform Surfaces Using Morphological Methods. In: Manufacturing the future conference 2013, 17-18 September 2013, Cranfield University, UK. (Unpublished)
Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) An Efficient Divide-and-Conquer Algorithm for Morphological Filters. Procedia CIRP, 10. pp. 142-147. ISSN 2212-8271
Lou, Shan, Jiang, Xiang and Scott, Paul J. (2013) Applications of Morphological Operations in Surface Metrology and Dimensional Metrology. In: 14th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2013), 17th - 21st June 2013, Taipei, Taiwan.
Lou, Shan, Jiang, Xiangqian, Bills, Paul J. and Scott, Paul J. (2013) Defining True Tribological Contact Through Application of the Morphological Method to Surface Topography. Tribology Letters, 50 (2). pp. 185-193. ISSN 1023-8883
Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) Application of the morphological alpha shape method to the extraction of topographical features from engineering surfaces. Measurement, 46 (2). pp. 1002-1008. ISSN 0263-2241
Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) Correlating motif analysis and morphological filters for surface texture analysis. Measurement, 46 (2). pp. 993-1001. ISSN 0263-2241
Lou, Shan, Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2013) Robust Filtration Techniques in Geometrical Metrology and Their Comparison. International Journal of Automation and Computing, 10 (1). pp. 1-8. ISSN 1476-8186
Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) An Efficient Divide-and-Conquer Algorithm for Morphological Filters. Procedia Engineering: 12th CIRP Conference on Computer Aided Tolerancing, 10. pp. 142-147. ISSN 1877-7058
Lou, Shan, Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2012) Comparison of Robust Filtration Techniques in Geometrical Metrology. In: 18th International Conference on Automation and Computing (ICAC) 2012. IEEE, Leicestershire, UK, pp. 1-6. ISBN 978-1-4673-1722-1
Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2012) Algorithms for morphological profile filters and their comparison. Precision Engineering, 36 (3). pp. 414-423. ISSN 01416359
Lou, Shan, Jiang, Xiang and Scott, Paul J. (2012) An Introduction to Morphological Filters in Surface Metrology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 7-13. ISBN 978-1-86218-106-9
Lou, Shan, Jiang, Xiang and Scott, Paul J. (2011) Morphological Filters Based on Motif Combination for Functional Surface Evaluation. In: Proceedings of the 17th International Conference on Automation & Computing, 10 September 2011, University of Huddersfield, Huddersfield.
Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2011) Fast Algorithm for Morphological Filters. Journal of Physics: Conference Series, 311. p. 284. ISSN 1742-6596
Lu, Wenlong, Liu, Xiaojun, Jiang, Xiangqian, Qi, Qunfen and Scott, Paul J. (2010) Categorical data modelling for Cylindricity Consistent with Geometrical Product Specifications Standard System. Proceedings of SPIE: Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 75446S. ISSN 1996-756X
Lou, Shan, Jiang, Xiang and Scott, Paul J. (2010) A Fast Algorithm for Morphological Filters. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 190. ISBN 9781862180932
Lu, Wenlong, Jiang, Xiang, Qi, Qufen and Scott, Paul J. (2010) Modeling the integration between specifications and verification for cylindricity based on category theory. Measurement Science and Technology, 21 (11). ISSN 0957-0233
Leach, Richard K., Li, Tukun, Jiang, Xiang and Blunt, Liam (2010) Comparison of commercial software packages for calculating surface texture parameters. In: Proceedings of the euspen International Conference, Monday 31st May - Friday 4th June 2010, Delft, Holland. (Submitted)
Lan, Xiangqi, Jiang, Xiang, Blunt, Liam and Xiao, Shaojun (2009) An adaptive system framework for surface characterisation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 142-146. ISBN 9781862180857
Li, T., Leach, Richard K., Jung, L, Jiang, Xiang and Blunt, Liam (2009) Comparison of Type F2 Software Measurement Standards for Surface Texture. Technical Report. National Physical Laboratory, UK, London, UK.
Lu, Wenlong, Jiang, Xiang, Scott, Paul J. and Lan, Xiangqi (2009) A Host System for Form Tolerance Specification in the Next-generation GPS based on AutoCAD. In: The 11th CIRP Conference on Computer Aided Tolerancing “Geometric Variations within Product Life-Cycle Management”, 26-27 March 2009, Annecy, France.
Lan, Xiangqi, Jiang, Xiang, Blunt, Liam, Xiao, Shaojun and Xie, Fang (2009) Characterisation Platform For Surface Metrology. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Li, T., Blunt, Liam and Jiang, Xiang (2009) Uncertainty In Surface Roughness Measurement. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Lu, Wenlong, Jiang, Xiang, Liu, X.J. and Xu, Zhijie (2008) Compliance uncertainty of diameter characteristic in the next-generation geometrical product specifications and verification. Measurement Science and Technology, 19 (10). pp. 105103-1. ISSN 0957-0233
Li, T., Jiang, Xiang, Blunt, Liam, Scott, Paul J. and Xiao, Shaojun (2008) The Design and Use of F1 Softgauges for Validating Surface Metrology Software. Key Engineering Materials, 381-38. pp. 643-646. ISSN 1013-9826
Li, T., Jiang, Xiang, Blunt, Liam, Scott, Paul J. and Yao, Shaowen (2007) The Design and Use of F1 Softgauges for Validating Surface Metrology Software. In: The 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2007), 24-27 September 2007, Tohoku University, Sendai, Japan. (Unpublished)
Li, T., Blunt, Liam, Jiang, Xiang, Scott, Paul J. and Xiao, X. (2007) On the accuracy of roughness parameters. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.
Li, T., Jiang, Xiang, Blunt, Liam, Scott, Paul J. and Xiao, Shaojun (2007) Comparison on F2 softgauges for surface texture. In: 1st European Conference on Tribology (ECOTRIB), June 12-15, 2007, Ljubljana, Slovenia.
Li, H., Jiang, Xiang and Li, Z. (2005) Combination of M-estimation and Gaussian filtering for characterizing 3D Engineering surfaces. Key Engineering Materials, 295-29. pp. 459-464. ISSN 1013-9826
Lin, D., Jiang, Xiang, Zhang, W., Zhang, L. and Blunt, Liam (2005) Multiplexed fibre interferometer and its application on surface measurement. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)
Li, H., Cheung, C.F., Lee, W.B., To, S and Jiang, Xiang (2005) Characterisation of surface roughness for ultra-precision freeform surfaces. Journal of Physics: conference series, Series. pp. 32-35. ISSN 1742-6596
Li, Z. and Jiang, Xiang (2005) An international strategy for China's manufacturing industry and technical standards. In: International Manufacturing Leaders Forum (IMLF 2005), 28th Feb-2nd March 2005, Glenelg Beach, Adelaide, South Australia. (Unpublished)
Lin, Dejiao, Jiang, Xiang, Xie, Fang, Zhang, Wei, Zhang, Lin and Bennion, Ian (2004) High stability multiplexed fibre interferometer and its application on absolute displacement measurement and on-line surface metrology. Optics Express, 12 (23). pp. 5729-5734. ISSN 1094-4087
Li, Huifen, Jiang, Xiang and Li, Zhu (2004) Robust estimation in Gaussian filtering for engineering surface characterization. Precision Engineering, 28 (2). pp. 186-193. ISSN 0141-6359
Liu, X., Cheung, K., Webb, D., Fiang, X.Q., Xiao, S.J., Longstaff, Andrew P., Widiyarto, H.M. and Jiang, Xiang (2004) Improved dynamic cutting force model in peripheral milling Part 2 Experimental verification and prediction. International Journal of Advanced Manufacturing Technology, 24. pp. 794-805. ISSN 0268-3768
Liu, X, Cheng, K., Webb, D., Jiang, Xiang, Xiao, Shaojun, Longstaff, Andrew P., Widiyarto, H.M., Blunt, Liam and Ford, Derek G. (2003) Experimental investigation of the machined surface waviness, vibrations and cutting forces in peripheral milling. Key Engineering Materials, Advances in Abrasive Technology VI. pp. 213-218. ISSN 1013-9826
Liu, X-W, Cheng, K., Webb, D., Longstaff, Andrew P., Widiyarto, Muhammad Helmi Nur, Jiang, Xiang, Blunt, Liam and Ford, Derek G. (2003) Prediction and compensation of machining error in ball end milling for microscale curved surface. In: EUSPEN International Topical Conference, 19 - 20 May 2003, Aachen, Germany.
Liu, X.W., Cheng, K., Webb, D., Longstaff, Andrew P., Widiyarto, Muhammad Helmi Nur, Jiang, Xiang, Blunt, Liam and Ford, Derek G. (2003) Investigation of the cutting force coefficients in ball-end milling. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 45-54. ISBN 9781853129902
Moschetti, Giuseppe, Forbes, Alistair B., Leach, Richard, Jiang, Xiang and Connor, Daniel (2016) Quadrature wavelength scanning interferometry. Applied Optics, 55 (20). pp. 5332-5340. ISSN 1559-128X
Moschetti, Giuseppe, Forbes, Alistair, Leach, Richard K, Jiang, Xiang and O’Connor, Daniel (2016) Phase and fringe order determination in wavelength scanning interferometry. Optics Express, 24 (8). pp. 8997-9012. ISSN 1094-4087
Moschetti, Giuseppe, Muhamedsalih, Hussam, Jiang, Xiang, Leach, Richard K. and O'Connor, Daniel (2015) Extending the vertical range of wavelength scanning interferometry. In: Proceedings of the 5th ASPE Topical Meeting on Precision Interferometric Metrology. American Society for Precision Engineering, pp. 50-55. ISBN 978-1-887706-68-1
Moschetti, Giuseppe, Muhamedsalih, Hussam, Connor, Daniel, Jiang, Xiang and Leach, Richard K. (2015) Vertical axis non-linearities in wavelength scanning interferometry. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 31-39. ISBN 978-0-9566790-5-5
Muhamedsalih, Hussam, Blunt, Liam, Martin, Haydn, Jiang, Xiang and Elrawemi, Mohamed (2014) An interferometric auto-focusing method for on-line defect assessment on a roll-to-roll process using wavelength scanning interferometry. In: Proceedings of EUSPEN 14th International Conference 2014. EUSPEN, Dubrovnik, Croatia, pp. 177-180. ISBN 978-0-9566790-3-1
Martin, Haydn, Kumar, Prashant and Jiang, Xiangqian (2014) A hybrid photonics based sensor for surface measurement. CIRP Annals - Manufacturing Technology, 63 (1). pp. 549-552. ISSN 0007-8506
Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2013) Accelerated surface measurement using wavelength scanning interferometer with compensation of environmental noise. Procedia Engineering: 12th CIRP Conference on Computer Aided Tolerancing, 10. pp. 70-76. ISSN 1877-7058
Muhamedsalih, Hussam, Jiang, Xiang and Gao, Feng (2013) Accelerated Surface Measurement Using Wavelength Scanning Interferometer with Compensation of Environmental Noise. Procedia CIRP, 10. pp. 70-76. ISSN 2212-8271
Martin, Haydn and Jiang, Xiangqian (2013) Dispersed reference interferometry. CIRP Annals - Manufacturing Technology, 62 (1). pp. 551-554. ISSN 0007-8506
Muhamedsalih, Hussam, Gao, F. and Jiang, Xiang (2012) Comparison study of algorithms and accuracy in the wavelength scanning interferometry. Applied Optics, 51 (36). pp. 8854-8862. ISSN 0003-6935
Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2011) Comparison of fast Fourier transform and convolution in wavelength scanning interferometry. In: Proceedings of SPIE Volume 8082. SPIE Optical Metrology, 80820Q-80820Q.
Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2011) Acceleration computing process in wavelength scanning interferometry. In: 10th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2011), 29th June - 2nd July 2011, Daejeon, S. Korea. (Unpublished)
Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2010) Vibration compensation of wavelength scanning interferometer for in-process surface inspection. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 148-153. ISBN 9781862180932
Martin, Haydn and Jiang, Xiang (2010) Rapid phase shifting fiber interferometer with optical stylus. Optical Letters, 35 (5). pp. 655-657. ISSN 0146-9592
Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2009) Interferograms analysis for wavelength scanning interferometer using convolution and fourier transform. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 33-37. ISBN 9781862180857
Martin, Haydn and Jiang, Xiang (2009) Phase Feedback Active Stabilisation Of A Multiplexed Fibre Interferometer. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Muhamedsalih, Hussam, Jiang, Xiang and Wang, Kaiwei (2009) Surface Profile Height Measurement Using Optical Interferometry Method. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Martin, Haydn and Jiang, Xiang (2008) Stabilising fibre interferometers. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 75-80. ISBN 978-1-86218-067-3
Martin, Haydn, Wang, Kaiwei and Jiang, Xiang (2008) Vibration compensating beam scanning interferometer for surface measurement. Applied Optics, 47 (7). pp. 888-893. ISSN 0003-6935
Ma, J.W., Jiang, Xiang and Scott, Paul J. (2005) Complex ridgelets for shift invariant characterizaion of surface topography with line singularities. Physics Letters A, 344. pp. 423-431. ISSN 0375-9601
Ma, L.M., Jiang, Xiang, Xu, Z. and Li, Z. (2005) An investigation on the technical standard strategy for China's manufacturing industry. Journal of Physics: conference series, 13. pp. 389-393. ISSN 1742-6596
Ma, J.W., Jiang, Xiang and Blunt, Liam (2004) Complex wavelet transform for extraction of morphological features on surface topography. In: euspen 4th International Conference, 30th May-3rd June 2004, Glasgow. (Unpublished)
Niu, Z, Gao, Nan, Zhang, Zonghua, Gao, Feng and Jiang, Xiang (2018) 3D shape measurement of discontinuous specular objects based on advanced PMD with bi-telecentric lens. Optics Express, 26 (2). pp. 1615-1632. ISSN 1094-4087
Pagani, Luca, Qi, Qunfen, Jiang, Xiangqian and Scott, Paul J. (2017) Towards a new definition of areal surface texture parameters on freeform surface. Measurement, 109. pp. 281-291. ISSN 0263-2241
Peng, H.P., Jiang, Xiang and Liu, X.J. (2008) Concurrent optimal allocation of design and process tolerances for mechanical assemblies with interrelated dimension chains. International Journal of Production Research, 46 (24). pp. 6963-6979. ISSN 00207543
Peng, H.P., Jiang, Xiang, Xu, Zhijie and Liu, X.J. (2008) Optimal tolerance design for products with correlated characteristics by considering the present worth of quality loss. International Journal of Advanced Manufacturing Technology, 39 (1-2). pp. 1-8. ISSN 0268-3768
Peng, H., Liu, X., Jiang, Xiang and Wang, Y. (2007) Concurrent tolerance design based on a comprehensive model of manufacturing cost-quality loss. In: 10th International Conference on Computer Aided Tolerancing, 21st-23rd March, 2007, Erlangen, Germany. (Unpublished)
Qin, Yuchu, Lu, Wenlong, Qi, Qunfen, Liu, Xiaojun, Zhong, Yanru, Scott, Paul J. and Jiang, Xiang (2016) Status, comparison, and issues of CAD model data exchange methods based on standardized neutral files and OWL file. Journal of Computing and Information Science in Engineering, 17 (1). ISSN 1530-9827
Qin, Yuchu, Lu, Wenlong, Qi, Qunfen, Li, Tukun, Huang, Meifa, Scott, Paul J. and Jiang, Xiang (2016) Explicitly representing the semantics of composite positional tolerance for patterns of holes. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768
Qi, Qunfen, Scott, Paul J., Jiang, Xiangqian and Lu, Wenlong (2016) A hierarchical category model for geometrical product specifications (GPS). Procedia CIRP, 43. pp. 214-219. ISSN 2212-8271
Qi, Qunfen, Li, Tukun, Scott, Paul J. and Jiang, Xiang (2015) A correlational study of areal surface texture parameters on some typical machined surfaces. Procedia CIRP, 27. pp. 149-154. ISSN 2212-8271
Qi, Qunfen, Scott, Paul J., Jiang, Xiangqian and Lu, Wenlong (2014) Design and implementation of an integrated surface texture information system for design, manufacture and measurement. Computer Aided Design, 57. pp. 41-53. ISSN 0010-4485
Qi, Qunfen, Jiang, Xiang and Scott, Paul J. (2013) A Knowledge Platform for Surface Texture in Advanced Manufacturing. In: Manufacturing the Future Conference. Abstracts from the 2nd Annual EPSRC . EPSRC, Cranfield, UK, p. 60. ISBN 978-1-907413-22-3
Qi, Qufen, Jiang, Xiang, Scott, Paul J. and Lu, Wenlong (2013) Surface texture specification, the more complete the better? Procedia CIRP, 10. pp. 233-237. ISSN 2212-8271
Qi, Qufen, Scott, Paul J., Jiang, Xiang, Lu, Wenlong and Ding, Hao (2013) The Discussion of Uncertainties in Surface Texture during Design, Manufacture and Measurement. In: The 11th International Symposium of Measurement Technology and Intelligent Instruments, 1st-5th July 2013, RWTH, Aachen, Germany.
Qi, Qufen, Jiang, Xiang, Scott, Paul J. and Lu, Wenlong (2012) Model for a CAD-assisted designing process with focus on the definition of the surface texture specifications and quality. In: Proceedings of the 37th International MATADOR Conference. Springer, Manchester, UK, pp. 273-276. ISBN 978-1-4471-4479-3
Qi, Qunfen, Jiang, Xiang and Scott, Paul J. (2012) Knowledge modeling for specifications and verification in areal surface texture. Precision Engineering, 36 (2). pp. 322-333. ISSN 0141-6359
Qi, Qufen, Blunt, Liam, Scott, Paul J. and Jiang, Xiang (2010) Modeling of the concepts in ISO standards for profile surface texture. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 172-176. ISBN 9781862180932
Qi, Qunfen, Jiang, Xiangqian, Liu, Xiaojun and Scott, Paul J. (2010) An unambiguous expression method of the surface texture. Measurement, 43 (10). pp. 1398-1403. ISSN 0263-2241
Ren, Hongyu, Gao, Feng and Jiang, Xiangqian (2016) Least-squares method for data reconstruction from gradient data in deflectometry. Applied Optics, 55 (22). pp. 6052-6059. ISSN 0003-6935
Ren, Hongyu, Gao, Feng and Jiang, Xiang (2016) Simulation study of a refined approach for specular surfaces reconstruction in deflectometry. In: 16th International Conference and Exhibition EUSPEN, 30th May-3rd June 2016, Nottingham, UK.
Ren, Hongyu, Gao, Feng and Jiang, Xiangqian (2015) Improvement of high-order least-squares integration method for stereo deflectometry. Applied Optics, 54 (34). pp. 10249-10255. ISSN 0003-6935
Ren, Hongyu, Gao, Feng and Jiang, Xiangqian (2015) Iterative optimization calibration method for stereo deflectometry. Optics Express, 23 (17). pp. 22060-22068. ISSN 1094-4087
Ren, Hongyu, Jiang, Xiangqian, Gao, Feng and Zhang, Zonghua (2014) Absolute height measurement of specular surfaces with modified active fringe reflection photogrammetry. In: Proceedings of SPIE 9204, Interferometry XVII: Advanced Applications, 920408. SPIE, California, USA, 920408-1-920408-8.
Ren, Hongyu, Jiang, Xiangqian, Gao, Feng and Zhang, Zonghua (2014) Absolute height measurement of specular surfaces with modified active fringe reflection photogrammetry. In: Interferometry XVII: Advanced Applications. Proceedings of SPIE, 9204 (9204). SPIE, San Diego, California, USA, 920408-1-920408-8. ISBN 9781628412314
Ren, Hongyu, Jiang, Xiang and Gao, F. (2013) Simulation of Tri-sensor Deflectometry for Freeform and Structured Specular Surfaces. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 236. ISBN 9781862181212
Su, Yang, Xu, Zhijie and Jiang, Xiang (2009) Real-time VE Signal Extraction and Denoising Using Programmable Graphics Hardware. International Journal of Automation and Computing, 6 (4). pp. 326-334. ISSN 1476-8186
Su, Yang, Xu, Zhijie, Jiang, Xiang and Pickering, Jonathan (2008) Discrete wavelet transform on consumer-level graphics processing unit. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 40-47. ISBN 978-1-86218-067-3
Su, Yang, Xu, Zhijie and Jiang, Xiang (2008) Stream-Based Data Filtering for Accelerating Metrological Data Characterization. In: Proceedings of the 14th International Conference on Automation and Computing. ICAC, pp. 81-85. ISBN 978-0-9555294-2-0
Su, Yang, Xu, Zhijie and Jiang, Xiang (2008) GPGPU-based Gaussian Filtering for Surface Metrological Data Processing. In: Information Visualisation, 2008. IV apos;08. 12th International Conference. Information Visualisation, 2008. IV apos;08. 12th International Conference, pp. 94-99.
Scott, Paul J., Jiang, Xiang and Blunt, Liam (2002) An overview of the relationship between approximation theory and filtration. In: Algorithms for approximation IV : the proceedings of the Fourth International Symposium on Algorithms for Approximation, held at the University of Huddersfield, July 2001. University of Huddersfield, Huddersfield, pp. 188-196. ISBN 1862180407
Townsend, Andrew, Pagani, Luca, Blunt, Liam, Scott, Paul J. and Jiang, Xiangqian (2017) Factors affecting the accuracy of areal surface texture data extraction from X-ray CT. CIRP Annals - Manufacturing Technology, 66 (1). pp. 547-550. ISSN 0007-8506
Tong, Zhen, Jiang, Xiang, Bai, Qingshun and Blunt, Liam (2017) Atomistic investigation of FIB-induced damage in diamond cutting tools under various ion irradiation conditions. In: 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, 29 May - 2 June 2017, Hannover. (Unpublished)
Tong, Zhen, Jiang, Xiang, Luo, Xichun, Bai, Qingshun, Blunt, Liam, Xu, Zongwei and Liang, Yingchun (2016) Review on FIB-induced damage in diamond materials. Current Nanoscience, 12 (6). pp. 685-695. ISSN 1573-4137
Tang, Dawei, Gao, Feng and Jiang, Xiangqian (2016) Implementation of line-scan dispersive interferometry for defect detection. In: EUSPEN 16th International Conference & Exhibition, 30th May - 3rd June 2016, Nottingham, UK.
Tong, Zhen, Jiang, Xiang, Bai, Qingshun, Blunt, Liam and Luo, Xichun (2016) Atomistic investigation of the wear of nanoscale diamond cutting tools shaped by focused ion beam. In: Euspen’s 16th international conference, 30/05/16 - 03/06/16, Nottingham.
Tong, Zhen, Luo, Xichun, Sun, Jining, Liang, Yingchun and Jiang, Xiangqian (2015) Investigation of a scale-up manufacturing approach for nanostructures by using a nanoscale multi-tip diamond tool. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768
Tang, Dawei, Gao, F. and Jiang, Xiang (2014) White Light Channeled Spectrum Interferometry for the On-line Surface Inspection. In: The 3rd Annual EPSRC Manufacturing the Future Conference, 23 Sep-24 Sep 2014, Glasgow Science Centre, Glasgow, UK. (Unpublished)
Tang, Dawei, Gao, Feng and Jiang, Xiangqian (2014) On-line surface inspection using cylindrical lens-based spectral domain low-coherence interferometry. Applied Optics, 53 (24). pp. 5510-5516. ISSN 1559-128X
Tang, Dawei, Gao, Feng and Jiang, Xiangqian (2014) Cylindrical Lenses Based Spectral Domain Low-Coherence Interferometry for On-line Surface Inspection. In: Euspen 14th International Conference & Exhibition, 2nd - 6th June 2014, Dubrovnik, Croatia.
Tong, Zhen, Liang, Yingchun, Jiang, Xiang and Luo, Xichun (2014) An atomistic investigation on the mechanism of machining nanostructures when using single tip and multi-tip diamond tools. Applied Surface Science, 290. pp. 458-465. ISSN 0169-4332
Tang, Dawei, Gao, F. and Jiang, Xiang (2013) Spectral Domain Low- Coherence Interferometry for On-line Surface Inspection. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 194-199. ISBN 9781862181212
Tong, Zhen, Luo, Xichun, Blunt, Liam and Jiang, Xiang (2013) An atomistic investigation of FIB process damage on diamond. In: The 13th International EUSPEN Conference & Exhibition, 27th-30th May 2013, Berlin, Germany.
Tian, Yuan, Wang, Jian, Peng, Zhongxiao and Jiang, Xiang (2012) A new approach to numerical characterisation of wear particle surfaces in three-dimensions for wear study. Wear, 282-3. pp. 59-68. ISSN 0043-1648
Tian, Y., Wang, Jian, Peng, Z. and Jiang, Xiang (2011) Numerical analysis of cartilage surfaces for osteoarthritis diagnosis using field and feature parameters. Wear, 271 (9-10). pp. 2370-2378. ISSN 0043-1648
Wu, Xin, Yu, Yingjie, Zeng, Wenhan, Qi, Te, Chen, Mingyi and Jiang, Xiangqian (2017) Non-overlap subaperture interferometric testing for large optics. Optics Communications, 396. pp. 191-198. ISSN 0030-4018
Williamson, James, Martin, Haydn and Jiang, Xiangqian (2016) High resolution position measurement from dispersed reference interferometry using template matching. Optics Express, 24 (9). p. 10103. ISSN 1094-4087
Woodcock, Rebecca, Muhamedsalih, Hussam, Martin, Haydn and Jiang, Xiangqian (2016) Burg algorithm for enhancing measurement performance in wavelength scanning interferometry. Surface Topography: Metrology and Properties, 4 (2). 024003. ISSN 2051-672X
Wang, Jian, Leach, R.K. and Jiang, Xiang (2015) Review of the mathematical foundations of data fusion techniques in surface metrology. Surface Topography: Metrology and Properties, 3 (2). ISSN 2051-672X
Williamson, James, Martin, Haydn and Jiang, Xiang (2014) Phase Calculation of Spectral Interferograms using Template Matching. In: Manufacturing the Future Conference 2014, 23rd – 24th September 2014, University of Strathclyde. (Unpublished)
Williamson, James, Martin, Haydn and Jiang, Xiang (2013) High Resolution Dispersed Reference Interferometry. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 212-217. ISBN 9781862181212
Williamson, James, Martin, Haydn and Jiang, Xiang (2013) A Dispersed Reference Interferometer for Surface and Dimensional Metrology. In: Manufacturing the future conference 2013, 17-18 September 2013, Cranfield University, UK.
Wang, M., Peng, Z., Wang, Jian and Jiang, Xiang (2013) Wear characterisation of articular cartilage surfaces at a nano-scale using atomic force microscopy. Tribology International, 63. pp. 235-242. ISSN 0301-679X
Wang, Jian, Jiang, Xiang, Blunt, Liam, Leach, Richard K. and Scott, Paul J. (2012) Intelligent sampling for the measurement of structured surfaces. Measurement Science and Technology, 23 (8). ISSN 0957-0233
Wang, J., Jiang, Xiang, Blunt, Liam, Leach, R.K. and Scott, Paul J. (2012) A boundary segmentation algorithm for extracting microscale dimensional parameters in the measurement of structured surfaces. In: euspen 12th International Conference and Exhibition, 4 - 8 June 2012, Stockholm, Sweden. (Unpublished)
Wang, Jian, Jiang, Xiangqian, Gurdak, Elzbieta, Scott, Paul J., Leach, Richard, Tomplins, Paul and Blunt, Liam (2011) Numerical characterisation of biomedical titanium surface texture using novel feature parameters. Wear, 271 (7-8). pp. 1059-1065. ISSN 0043-1648
Wang, Jian, Jiang, Xiangqian, Blunt, Liam, Leach, Richard K. and Scott, Paul J. (2011) Efficiency of adaptive sampling in surface texture measurement for structured surfaces. In: The 13th International Conference on Metrology and Properties of Engineering Surfaces, 12-15 April 2011, National Physical Laboratory, Teddington, UK.
Wang, Jian, Jiang, Xiang and Blunt, Liam (2010) Simulation of Adaptive Sampling in Profile Measurement for Structured Surfaces. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 48-53. ISBN 9781862180932
Wang, J, Jiang, Xiang and Blunt, Liam (2009) A survey of potential sampling strategies for measurement of structured surfaces. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 184-189. ISBN 9781862180857
Wang, Jian, Jiang, Xiang, Blunt, Liam and Leach, Richard K. (2009) Structured Surfaces, Measurements & Characterization. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Wang, Kaiwei, Martin, Haydn and Jiang, Xiang (2008) Actively stabilized optical fiber interferometry technique for online/in-process surface measurement. Review of scientific instruments, 79 (2). 023109. ISSN 0034-6748
Wang, Kaiwei, Jiang, Xiang and Martin, Haydn (2007) Advances of optical fibre interferometer for on-line surface measurement. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.
Wang, Kaiwei, Jiang, Xiang, Martin, Haydn and Blunt, Liam (2007) Light-beam scanning interferometry for on-line ultra precision surface measurement. In: 7th International Conference of the European Society for Precision Engineering and Nanotechnology 2007. Proceedings. Euspen, Bedford, pp. 302-305. ISBN 978-0-9553082-2-2
Wang, Yan, Scott, Paul J. and Jiang, Xiang (2006) Category model to modeling the surface texture knowledge-base. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-7.
Wang, J., Jiang, Xiang, Ma, L.M., Xu, Z. and Li, Z. (2005) Uncertainty of spatial straightness in 3D measurement. Journal of Physics, 13. pp. 220-223. ISSN 1742-6596
Wang, Yan, Scott, Paul J. and Jiang, Xiang (2005) The structure of surface texture knowledge. Journal of Physics: conference series, 13. pp. 1-4. ISSN 1742-6596
Wang, J.X., Ma, L.M., Jiang, Xiang, Xu, Zhijie and Li, Z. (2004) Uncertainty of flatness least-square verification. In: ISIST 2004, The Third International Symposium on Instrumentation Science and Technology, 18th-22nd August 2004, China. (Unpublished)
Xu, Yongjia, Gao, Feng, Zhang, Zonghua and Jiang, Xiang (2017) A calibration method for non-overlapping cameras based on mirrored phase target. In: The 13th International Symposium on Measurement Technology and Intelligent Instruments, 22-25 September 2017, Xi'an, Shaanxi, China. (Unpublished)
Xu, Yongjia, Gao, Feng, Ren, Hongyu, Zhang, Zonghua and Jiang, Xiangqian (2017) An iterative distortion compensation algorithm for camera calibration based on phase target. Sensors, 17 (6). p. 1188. ISSN 1424-8220
Xie, Lili, Huang, Shujun, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2014) Projector calibration method based on optical coaxial camera. In: International Conference on Optoelectronic Technology and Application, 13-15 May 2014, Beijing, China.
Xu, Yuanping, Xu, Zhijie, Jiang, Xiang and Paul, Scott (2010) Developing a Knowledge-based System for Complex Geometrical Product Specification (GPS) Data Manipulation. Knowledge Based Systems, 24 (1). pp. 10-22. ISSN 0950-7051
Xu, Yuanping, Xu, Zhijie, Jiang, Xiang, Scott, Paul J. and Pickering, Jonathan (2008) Evaluation on the categorical DBMS for the VirtualGPS knowledge system. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 81-86. ISBN 978-1-86218-067-3
Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2008) Implementation of a Category Theory-Based GPS Knowledge System for Product Design. In: The 14th International conference on Automation & Computing, Saturday, 6th September 2008,, ICAC 2008 Conference.
Xie, F, Xiao, S, Blunt, Liam, Zeng, Wenhan and Jiang, Xiang (2008) Automated bullet-identification system based on surface topography techniques. Wear, 266. pp. 518-522. ISSN 0043-1648
Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2008) Category theory-based object-oriented data management for web-based virtual manufacturing. International Journal of Internet Manufacturing and Services, 1 (2). pp. 136-159. ISSN 1751-6048
Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2007) Exploration of a Category Theory-Based Object-Oriented Database for Surface Texture Information Management. In: Proceedings of the First International Symposium on Data, Privacy, and E-Commerce November 1-3, 2007. IEEE Computer Society, London, UK, pp. 107-109. ISBN 978-0-7695-3016-1
Xie, F., Xiao, Shaojun, Blunt, Liam and Jiang, Xiang (2007) Component-based software framework for surface topography visualization and analysis. In: The 11th International Conference on Metrology and Properties of Engineering, 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.
Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2007) Machining surface texture knowledge management using a category theory-based object-oriented database. Communications of SIWN (formerly: System and Information Sciences Notes), 1 (1). pp. 83-88. ISSN 1757-4439
Xiao, Shaojun, Xie, F., Blunt, Liam, Scott, Paul J. and Jiang, Xiang (2006) Feature extraction for structured surface based on surface networks and edge detection. Materials Science in Semiconductor Processing, 9 (1-3). pp. 210-214. ISSN 1369-8001
Xie, F., Zhang, W., Jiang, Xiang, Zhang, L. and Bennion, Ian (2003) Novel spatial scanning technique for surface roughness measurement. Lasers and Electro-Optics Society, IEEELEOS, 1 (27-28). pp. 97-98.
Xiao, Shaojun, Jiang, Xiang, Blunt, Liam and Scott, Paul J. (2001) Comparison study of the biorthogonal spline wavelet filtering for areal rough surfaces. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2103-2111. ISSN 08906955
Xiao, Shaojun, Jiang, Xiang and Blunt, Liam (2001) Multi-Scalar features extraction for the bioengineering nanoscalar surfaces on the basis of the wavelet analysis. In: Proceedings of the Fifth International Symposium on Measurement Technology and Intelligent Instruments ISMTII 2001. National Institute of Standards, pp. 153-159.
Ye, Ruifang, Jiang, Xiangqian, Blunt, Liam, Cui, Changcai and Yu, Qing (2015) The application of 3D-motif analysis to characterize diamond grinding wheel topography. Measurement, 77. pp. 73-79. ISSN 0263-2241
Yu, Y, Huang, Shujun, Zhang, Zonghua, Gao, Feng and Jiang, Xiang (2014) The research of 3D small-field imaging system based on fringe projection technique. In: International Conference on Optoelectronic Technology and Application, 13-15 May 2014, Beijing, China.
Yang, Shuming, Jiang, Xiang, Maxwell, Graeme and Wang, Kaiwei (2008) An integrated optical coupler used in a fibre interferometry system for on-line surface measurements. Optics Communications, 281 (5). pp. 1099-1107. ISSN 0030-4018
Yang, Shuming and Jiang, Xiang (2008) The Roughness Measurement and Assessment of the Super-smooth Surface of Hard Disks. Key Engineering Materials, 364-36. pp. 1174-1179. ISSN 1013-9826
Yang, Shuming and Jiang, Xiang (2007) The beam propagation method used for the design of an integrated optical coupler. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.
Yan, W., Scott, Paul J. and Jiang, Xiang (2007) Structures of specification and verification knowledge-base in surface texture knowledge-based system. In: 10th International Conference on Computer Aided Tolerancing, 21st-23rd March, 2007, Erlangen, Germany.
Yang, Shuming and Jiang, Xiang (2006) The roughness measurement of the super-smooth surface of hard disks. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-7.
Yin, C., Lin, D., Liu, Z. and Jiang, Xiang (2006) New advance in confocal microscopy. Measurement Science and Technology, 17 (3). pp. 596-600. ISSN 0957-0233
Zhao, Ping, Gao, Nan, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2018) Performance analysis and evaluation of direct phase measuring deflectometry. Optics and lasers in engineering, 103. pp. 24-33. ISSN 0143-8166
Zhang, Zonghua, Wang, Yuemin, Huang, Shujun, Liu, Yue, Chang, Caixia, Gao, Feng and Jiang, Xiangqian (2017) Three-Dimensional Shape Measurements of Specular Objects Using Phase-Measuring Deflectometry. Sensors, 17 (12). p. 2835. ISSN 1424-8220
Zhang, Tao, Gao, Feng and Jiang, Xiang (2017) A method for inspecting double-sided high-sloped structured surfaces based on dual-probe wavelength scanning interferometer. In: The 13th International Symposium on Measurement Technology and Intelligent Instruments, 22-25 September 2017, Xi'an, Shaanxi, China. (Unpublished)
Zhang, Tao, Gao, Feng and Jiang, Xiangqian (2017) A surface topography acquisition method for double-sided near-right-angle structured surfaces based on dual-probe wavelength scanning interferometry. Optics Express, 25 (20). pp. 24148-214156. ISSN 1094-4087
Zhang, Po, Lu, Wenlong, Liu, Xiaojun, Zhou, Mingzhuo, Zhai, Wenzheng, Zhang, Gengpei, Zeng, Wenhan and Jiang, Xiangqian (2017) Torsional fretting wear behavior of CuNiAl against 42CrMo4 under flat on flat contact. Wear, 380-38. pp. 6-14. ISSN 0043-1648
Zhang, Zonghua, Huang, Shujun, Gao, Nan, Gao, F. and Jiang, Xiang (2017) Full-Field 3D Shape Measurement of Specular Object Having Discontinuous Surfaces. In: International Conference on Optical and Photonic Engineering (icOPEN 2017), 5-7 April 2017, Singapore.
Zeng, Wenhan, Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2017) A new framework for Charactersation of Complex Structured Surface. In: Met & Props 2017, 27th-29th June 2017, Gothenburg, Sweeden. (In Press)
Zeng, Wenhan, Lou, Shan, Abdul-Rahman, Hussein S., Jiang, Xiang and Scott, Paul J. (2017) Simultaneous Multi-type Feature Separation for Complex Structured Surface Analysis. In: Lamdamap 12th International Conference & Exhibition, 15-16th March 2017, Renishaw Innovation Centre, UK. (Unpublished)
Zeng, Wenhan, Jiang, Xiang, Lou, Shan, Abdul-Rahman, Hussein S. and Scott, Paul J. (2016) Complex Structured Surface Characterisation by using PDE based Adaptive Nonlinear Diffusion Filter. In: International Workshop on Mathematics and Statistics for Metrology, 7-9th November 2016, Berlin, Germany. (Unpublished)
Zhang, Zonghua, Liu, Y, Huang, Shujun, Niu, Z, Guo, J, Gao, N, Gao, Feng and Jiang, Xiang (2016) Full-Field 3D Shape Measurement of Specular Surfaces by Direct Phase to Depth Relationship. In: SPIE: Optical Metrology and Inspection for Industrial Applications IV, 12-14 October 2016, Beijing, China.
Zeng, Wenhan, Jiang, Xiang, Lou, Shan and Scott, Paul J. (2016) A Key Point Method for Data Registration for MultiSensor Fusion. In: EUSPEN 16th International Conference & Exhibition, 30th May - 3rd June 2016, Nottingham, UK. (Unpublished)
Zeng, Wenhan, Jiang, Xiangqian, Scott, Paul J. and Li, Tukun (2013) A New Method to Characterize the Structured Tessellation Surface. Procedia CIRP, 10. pp. 155-161. ISSN 2212-8271
Zhang, Zonghua, Huang, Shujun, Meng, Shasha, Gao, Feng and Jiang, Xiangqian (2013) A simple, flexible and automatic 3D calibration method for a phase calculation-based fringe projection imaging system. Optics Express, 21 (10). p. 12218. ISSN 1094-4087
Zhang, Hongyu, Blunt, Liam, Jiang, Xiang, Fleming, Leigh and Barrans, Simon (2012) The influence of bone cement type on production of fretting wear on the femoral stem surface: A preliminary study. Clinical Biomechanics, 27 (7). pp. 666-672. ISSN 0268-0033
Zeng, Shengye, Blunt, Liam and Jiang, Xiang (2012) The investigation of material removal in bonnet polishing of CoCr alloy artificial joints. In: Proceedings of the 12th international conference of the european society for precision engineering and nanotechnology EUSPEN 2012. EUSPEN, Stockholm, Sweden, pp. 352-355. ISBN 978-0-9566790-0-0
Zeng, S., Blunt, Liam and Jiang, Xiang (2012) Material removal investigation in bonnet polishing of CoCr alloy. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 25-30. ISBN 978-1-86218-106-9
Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2012) Diffusion filtration for the evaluation of MEMs surface. In: ISMTII 2011, 29th June - 2nd July 2011, Kaist, Daejeon, South Korea.
Zeng, Shengye, Blunt, Liam and Jiang, Xiang (2011) The application of Taguchi approach to optimise the processing conditions on bonnet polishing of CoCr. Key Engineering Materials, 496. pp. 235-240. ISSN 1013-9826
Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) A Reliable Method of Minimum Zone Evaluation of Cylindricity and Conicity from Coordinate Measurement Data. Precision Engineering, 35 (3). pp. 484-489. ISSN 0141-6359
Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2011) A Generalised Linear and Nonlinear Spline filter. Wear, 271 (3/4). pp. 544-547. ISSN 0043-1648
Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) A Minimax Fitting Algorithm for Ultra-Precision Aspheric Surfaces. In: The 13th International Conference on Metrology and Properties of Engineering Surfaces, 12-15 April 2011, National Physical Laboratory, Teddington, UK. (Unpublished)
Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359
Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2011) Roundness filtration by using robust regression filter. Measurement Science and Technology, 22 (3). 035108. ISSN 0957-0233
Zeng, Shengye, Blunt, Liam, Jiang, Xiang and Bills, Paul J. (2010) Investigation of the material removal characteristic for polishing CoCr alloy. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 177-182. ISBN 9781862180932
Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2010) Fast algorithm of the Robust Gaussian Regression Filter for Areal Surface Analysis. Measurement Science and Technology, 21 (5). 055108. ISSN 0957-0233
Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2010) Shape recognition and form error evaluation of quadric surfaces. In: Measurement Systems and Process Improvement (MSPI) 2010, 19-20, Apr, 2010, NPL, Teddington, UK. (Unpublished)
Zeng, Wenhan, Jiang, Xiang, Smith, I and Scott, Paul J. (2010) Transient Signal Separation in Watt Balance Experiments. Physics Letters A, 374 (11-12). pp. 1301-1306. ISSN 0375-9601
Zhu, Hao, Blunt, Liam and Jiang, Xiang (2009) An Active Contour Based Algorithm for Micro-scale Surface Feature Extraction. In: The Swedish Production Symposium, 2-3 December 2009, Göteborg, Sweden.
Zhu, Hao, Blunt, Liam and Jiang, Xiang (2009) Flexible shape extraction for micro/nano scale structured surfaces. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 190-194. ISBN 9781862180857
Zhang, Xiangchao, Jiang, Xiang, Scott, Paul J. and Cooper, Philip (2009) A Fast Point Projection Approach of NURBS surfaces. In: A4A6 - Algorithms for Approximation VI 2009, 31st August - 4th September 2009, Ambleside, UK. (Unpublished)
Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2009) A Generalised Linear and Nonlinear Spline filter. In: 12th International Conference on Metrology and Properties of Engineering Surfaces, 8-10 July 2009, Rzeszów, Poland. (Submitted)
Zeng, Wenhan, Jiang, Xiang, Scott, Paul J., Xiao, Shaojun and Blunt, Liam (2009) A Fast Algorithm for the High Order Linear and Nonlinear Gaussian Regression filter. In: Proceedings of the 9 th international conference of the european society for precision engineering and nanotechnology. euspen, San Sebastian, Spain, pp. 356-359. ISBN 978-0-9553082-6-0
Zhu, Hao, Blunt, Liam, Jiang, Xiang and Xiao, Shaojun (2009) Recognition of Features from Micro Scale Patterned Surfaces. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia.
Zhu, Hao, Blunt, Liam, Jiang, Xiang and Shaojun, Xiao (2009) Measurement and characterisation of micro nano-scale structured surfaces. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2009) New Geometrical Filtratation For Ultra-Precision And Micro,Nano Manufactured Products. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2009) The Orthogonal Distance Fitting Of Parametric Surfaces For Precision Coordinate Metrology. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2009) A new free-form surface fitting method for precision coordinate metrology. Wear, 266 (5-6). pp. 543-547. ISSN 0043-1648
Zeng, Wenhan, Jiang, Xiang and Blunt, Liam (2009) Surface Characterisation Based Tool Wear Monitoring in Peripheral milling. International Journal of Advanced Manufacturing Technology, 40 (3). pp. 226-233. ISSN 0268-3768
Zhu, Hao, Xiao, Shaojun, Jiang, Xiang and Blunt, Liam (2008) MEMS microstructured surface characterisation based on wavelet transform techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 87-92. ISBN 978-1-86218-067-3
Zhang, Hongyu, Blunt, Liam, Jiang, Xiang, Brown, Leigh, Barrans, Simon and Zhao, Y. (2008) Femoral stem wear in cemented total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 222 (5). pp. 583-592. ISSN 0954-4119
Zhang, Hongyu, Brown, Leigh, Blunt, Liam, Jiang, Xiang and Barrans, Simon (2008) Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacement. Wear, 266 (5-6). pp. 566-569. ISSN 0043-1648
Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2008) Investigation on the noise separation in watt balance experiments. Key Engineering Materials, 381-38. pp. 619-622. ISSN 1013-9826
Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2008) Orthogonal distance fitting of precision free form surfaces based on l1 norm. In: Conference on Advanced Mathematical and Computational Tools in Metrology and Testing, 23 – 25 June 2008, Paris, France.
Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2008) Morphological Component Analysis based Detection of Transient Behaviour in Environmental Vibration for the Watt Balance. In: 10th International Conference of the European Society for Precision Engineering and Nanotechnology, euspen, 18th-22nd May 2008, Kongresshaus Zurich.
Zhang, Xiangchao and Jiang, Xiang (2008) Numerical analyses of the boundary effect of radial basis functions in 3D surface reconstruction. Numerical Algorithms, 47 (4). pp. 327-339. ISSN 1017-1398
Zhang, X., Jiang, Xiang and Crampton, Andrew (2007) Numerical Analysis of the Boundary Effect of Radial Basis Functions in 3D Surface Reconstruction. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.
Zeng, Wenhan, Jiang, Xiang, Gao, Y. and Xie, T. (2005) Texture extraction and identification of 3D engineering surfaces. Key Engineering Materials, 295-29. pp. 453-458. ISSN 1013-9826
Zeng, Wenhan and Jiang, Xiang (2005) Complex wavelet transform based surface topography analysis. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)
Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2005) Metrological characteristics of dual-tree complex wavelet transform for surface analysis. Measurement Science and Technology, 16 (7). pp. 1410-1417. ISSN 0957-0233
Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2005) Metrological characteristics of complex wavelet transform for surface topography analysis. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)
Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2005) Complex ridgelets for the extraction of morphological features on engineering surfaces. Journal Paper of Physics: Conference Series, 13. pp. 246-249. ISSN 1742-6588
Zhang, X B, Lu, H, Jiang, Xiang and Li, Z. (2005) A straightness error measurement method matched new generation GPS. Journal of Physics: conference series, 13. pp. 402-405. ISSN 1742-6596
Ziao, S. J., Jiang, Xiang and Blunt, Liam (2000) Three-dimensional functional parameters for characterization of the bio-engineering surface at different stages of wear. In: 1st International Conference on Tribology in Environmental Design 2000 - The Characteristics of Interacting Surfaces. Professional Engineering Publishing, London, UK, pp. 155-161. ISBN 1-86058-266-4