Up a level |
Abdalla, Gaballa, Ball, Andrew and Gu, Fengshou (2013) Fault Detection and Diagnosis of Ball Bearing Using Advanced Vibration Analysis Techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 224. ISBN 9781862181212
Abdusamad, Ayad (2013) Mapping Extensible Mark-up Language (XML) Documents into Rational DataBase Management System (RDBMS) for Condition Monitoring (CM). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 225. ISBN 9781862181212
Aboaisha, Hosain, Xu, Zhijie and El-Feghi, Idris (2012) An investigation on efficient feature extraction approaches for Arabic letter recognition. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 80-85. ISBN 978-1-86218-106-9
Abobghala, Abdelmenem (2018) ASSESSING THE ENERGY EFFICIENCY OF RAILWAY VEHICLES WITH WHEELSET ACTIVE CONTROL. Doctoral thesis, University of Huddersfield.
Aboufares, Ghada (2015) Performance Characteristics of a Vertical Axis Wind Turbine Operating in Different Environmental Conditions. Masters thesis, University of Huddersfield.
Abuaniza, Ayman (2015) Thermal parameter optimisation for accurate finite element based on simulation of machine tools. Doctoral thesis, University of Huddersfield.
Abuaniza, Ayman, Fletcher, Simon and Longstaff, Andrew P. (2013) Thermal error modelling of a three axes vertical milling machine using Finite element analysis (FEA). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 87-92. ISBN 9781862181212
Abubaker, Azza and Lu, Joan (2012) Investigation effective factors into reading online arabic textbook for learning by children age 9 to 12. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9
Abuhabaya, Abdullah (2012) Investigation of engine performance and exhaust gas emissions by using bio-diesel in compression ignition engine and optimisation of bio-diesel production from feedstock by using response surface methodology. Doctoral thesis, University of Huddersfield.
Abuhabaya, Abdullah and Fieldhouse, John D. (2010) Variation of Engine Performance and Emissions using Ethanol Blends. In: Proceedings of the 14th International Conference on Machine Design and Production. The 14th International Conference on Machine Design and Production, Volume . Publisher UMTIK, The 14th International Conference on Machine Design and Production. Güzelyurt, Turkish Republic of Northern Cyprus. ISBN ISBN 978-975-429-282-4
Abuhabaya, Abdullah, Fieldhouse, John D. and Brown, D.R. (2010) Evaluation of Properties and use of waste vegetable oil (WVO), pure vegetable oils and standard diesel as used in a compression ignition engine. In: Future Technologies in Computing and Engineering Annual Researchers' Conference (CEARC'10). The University of Huddersfield, University of Huddersfield, Computing and Engineering Annual Researchers’ Conference 2010, pp. 71-76. ISBN 9781862180932
Aburass, Ali (2016) Diagnostics of fuel injection systems in a CI engine fuelled with biodiesel based on vibration responses. Doctoral thesis, University of Huddersfield.
Aburass, Ali, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) Combustion Diagnostics of a Diesel Engine with Biodiesel Fuels based on Vibro-acoustics and In-Cylinder Pressure Measurements. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 13-18. ISBN 9781862181212
Abusaad, Samieh, Benghozzi, Ahmed, Brethee, Khaldoon F., Gu, Fengshou and Ball, Andrew (2014) Investigating the Effect of Water Contamination on Gearbox Lubrication based upon Motor Control Data from a Sensorless Drive. In: 3rd International Workshop and Congress on eMaintenance, 17th - 18th June 2014, Lulea, Sweden.
Abushaala, Sufyan (2018) Hydrodynamic Analysis and Optimal Design of Pipelines Transporting Spherical Capsules. Doctoral thesis, University of Huddersfield.
Achilleos, Paris (2014) Design optimisation of a diffuser for a turbocharger compressor stage. Masters thesis, University of Huddersfield.
Addinall, Katie Anne (2017) The application of advanced metrology techniques to ballistics and toolmark identification. Post-Doctoral thesis, The University of Huddersfield.
Agarwal, V.C. and Mishra, Rakesh (1998) Optimal design of a multi-stage capsule handling multi-phase pipeline. International Journal of Pressure Vessels and Piping, 75 (1). pp. 27-35. ISSN 0308-0161
Ahfayd, Mostafa H., Farhat, Zohaib A., Sibley, Martin J.N., Mather, Peter and Lazaridis, Pavlos (2018) Visible light communication based system using high power LED and dicode pulse position modulation technique. In: 25th Telecommunications Forum: TELFOR 2017, 21-22 November 2017, Belgrade, Serbia.
Ahmaida, Anwar, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) Fatigue Prediction of a Gear Transmission System based on Vibro-Acoustic Measurements. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 93-99. ISBN 9781862181212
Ahmaida, Anwar M. (2018) Condition Monitoring and Fault Diagnosis of a Multi-Stage Gear Transmission Using Vibro-acoustic Signals. Doctoral thesis, University of Huddersfield.
Airede, Yusuf Okahamame (2019) Intrusive and Non-intrusive Methods for Fluid Diagnostics and Flow Condition Monitoring in a Control valve. Doctoral thesis, University of Huddersfield.
Al-Arbi, Salem (2012) Condition Monitoring of Gear Systems using Vibration Analysis. Doctoral thesis, University of Huddersfield.
Al-Bashir, Saif (2019) Multi-Wavelength Polarising Interferometer for In-Process Metrology. Doctoral thesis, University of Huddersfield.
Al-Braik, Abdulrahman, Hamomd, Osama, Gu, Fengshou and Ball, Andrew (2014) Diagnosis of Impeller Faults in a Centrifugal Pump Using Vibration Signals. In: Eleventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 10th - 12th June 2014, Manchester, UK.
Al-Hashmi, S., Gu, Fengshou, Li, Y., Ball, Andrew, Fen, Tao and Lui, Ke (2004) Cavitation Detection of a Centrifugal Pump Using Instantanous Angular Speed. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)
Al-Hinai, Sulaiyam (2010) Non-invasive velocity and volume fraction profile measurement in multiphase flows. Doctoral thesis, University of Huddersfield.
Al-Hinai, Sulaiyam and Lucas, Gary (2009) An Impedance Cross Correlation (ICC) Device For Measuring Solids Velocity And Volume Fraction Profiles In Solid-Water Flows. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Al-Hinai, Sulaiyam and Lucas, Gary (2009) An Impedance Cross Correlation (ICC) device for measuring solids velocity and volume fraction profiles in solids-water flows. In: What, Where, When: Multi-dimensional Advances for Industrial Process Monitoring International Symposium, Tuesday 23 - Wednesday 24 June 2009, Leeds, UK. (Unpublished)
Al-Nedawe, Basman, Buhafa, Adel M, Sibley, Martin J.N. and Mather, Peter (2013) Optimum reed solomon code using with dicode pulse position modulation system. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 25-30. ISBN 9781862181212
Al-Nedawe, Basman, Sibley, Martin J.N. and Mather, Peter (2010) Microelectronic implementation of error correcting codes for dicode pulse position modulation. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 184. ISBN 9781862180932
Al-Yarubi, O.S. and Lucas, Gary (2009) Phase Flow Rate Measurements of Annual Flows. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Al-Yarubi, Qahtan (2010) Phase flow rate measurements of annular flows. Doctoral thesis, University of Huddersfield.
Al-Yarubi, Qahtan and Lucas, Gary (2009) Modelling and Measurements of Film Characteristics and Gas Core of Annular Flows. In: What, Where, When: Multi-dimensional Advances for Industrial Process Monitoring International Symposium, Tuesday 23 - Wednesday 24 June 2009, Leeds, UK. (Unpublished)
Alabed, Asmaa and Chen, Xun (2008) Grinding knowledge sharing through a knowledge warehouse development. In: 6th International Conference on Manufacturing Research (ICMR 2008), 9th - 11th September 2008, Brunel University, London, UK. (Unpublished)
Alabed, Asmaa and Chen, Xun (2009) Web-Based Knowledge Warehouse Development 2. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Alabied, Samir, Hamomd, Osama, Daraz, Alsadak, Gu, Fengshou and Ball, Andrew (2017) Fault Diagnosis of Centrifugal Pumps based on the Intrinsic Time-scale Decomposition of Motor Current Signals. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601
Alaiwi, Ayman Ahmed (2013) The Design and Investigation of an Extremely Low Frequency (ELF) Transmission Data Link. Doctoral thesis, University of Huddersfield.
Alberts, Larry Russell, Martinez-Nogues, Vanesa, Cook, Richard, Maul, Christian, Bills, Paul J., Racasan, Radu, Stolz, Martin and Wood, Robert J. K. (2018) Comparison of Metal-on-Metal Hip Simulator Wear Measured by Gravimetric, CMM and Optical Profiling Methods. Surface Topography: Metrology and Properties, 6 (1). ISSN 2051-672X
Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter and Myers, Alan (2007) A high accuracy ultrasound distance measurement system using binary frequency shift-keyed signal and phase detection. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.
Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter, Myers, Alan and Briggs, Jack (2008) A multifrequency FM-based ultrasonic system for accuracy 3D measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 9-14. ISBN 978-1-86218-067-3
Aldawi, Fouad Juma (2009) A low-cost ultrasonic 3D measurement device for calibration of Cartesian and non-Cartesian machines. Doctoral thesis, University of Huddersfield.
Ale, Ben, Hanea, Daniela, Sillem, Simone, Lin, Pei Hui, Van Gulijk, Coen and Hudson, Patrick (2012) Modelling risk in high hazard operations: integrating technical, organisational and cultural factors. In: International Probabilistic Safety Assessment and Management Conference and the Annual European Safety and Reliability Conference 2012. IAPSAM & ESRA, Helsinki, Finland. ISBN 9781622764365
Algasim, Hamad and Fieldhouse, John D. (2010) Performance and emissions of compression ignition engines using waste cooked oil as fuel. In: Future Technologies in Computing and Engineering Annual Researchers' Conference (CEARC'10). The University of Huddersfield, Huddersfield, UK, pp. 65-70. ISBN 9781862180932
Alghadhi, Mosttafa, Ball, Andrew, Gu, Fengshou and Cattley, Robert (2013) Standard drive cycle recreation from general driving behaviour. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 100-105. ISBN 9781862181212
Ali, Holi (2018) Omani Engineering Students’ Experiences of Learning through the Medium of English. Doctoral thesis, University of Huddersfield.
Ali, Jafar, Fieldhouse, John D. and Talbot, Chris J. (2010) The Study of Warm Water Discharge into British Waterways Canal. In: SET for Britain 2010, 8th March 2010, Houses of Parliament, London, UK.. (Unpublished)
Ali, Jafar, Fieldhouse, John D. and Talbot, Chris J. (2011) Turbulent cooling water discharge into still body of water. Nuclear Engineering and Design, 241 (6). pp. 2006-2012. ISSN 00295493
Ali, Jafar, Fieldhouse, John D., Talbot, Chris J. and Mishra, Rakesh (2009) Thermal discharge of warm water into cooler stagnant water. In: What Where When: Multi-dimensional Advances for Industrial Process Monitoring. Proceedings. University of Leeds, Leeds, pp. 227-238.
Ali, M. and Lucas, Gary (2012) Optimisation of a Voltage Measurement and Control Circuit for an Imaging Electromagnetic Flow Meter. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 45-50. ISBN 978-1-86218-106-9
Ali, Maythem (2016) Development of an Electromagnetic Induction Method For Non-Invasive Blood Flow Measurement. Doctoral thesis, University of Huddersfield.
Ali, Maythem and Lucas, Gary (2013) Optimisation of an Analogue Signal Conditioning Circuit for a Novel Imaging Electromagnetic Flow meter. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 227. ISBN 9781862181212
Ali, Maythem and Lucas, Gary (2013) Optimisation of an Analogue Signal Conditioning Circuit for a Novel Imaging Electromagnetic Flow meter. In: 7th World Congress on Industrial Process Tomography. WCIPT7 . International Society for Industrial Process Tomography, Krakow, Poland, pp. 238-245. ISBN 978 0 853 16323 7
Aliwan, Mustafa (2016) Exploration of a Condition Monitoring System for Rolling Bearing Based on a Wireless Sensor Network. Doctoral thesis, University of Huddersfield.
Allport, John, Unver, Ertu, Rezk, Ahmed and Khodabakhshi, Goodarz (2017) Graphene Enhanced Adsorption Desalination System. In: Materials Forum, July 6th, 2017, BLG10, University of Huddersfield. (Unpublished)
Alseddiqi, Mohamed and Mishra, Rakesh (2010) A Diagnostic study on the teaching and learning styles in engineering education. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 105-109. ISBN 9781862180932
Altwieb, Miftah Omar (2018) Modelling and Optimisation of Heat Exchanger Integrated in Fan Coil Unit. Doctoral thesis, University of Huddersfield.
Alwodai, Ahmed, Shao, Y., Yuan, X., Ahmed, M., Gu, Fengshou and Ball, Andrew (2013) Inter-Turn Short Circuit Detection Based on Modulation Signal Bispectrum Analysis of Motor Current Signals. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. ICAC 2013 . Brunel University, London, UK. ISBN 978-1908549082
Alwodai, Ahmed, Xia, X., Shao, Yimin, Gu, Fengshou and Ball, Andrew (2012) Modulation Signal Bispectrum Analysis of Motor Current Signals for Stator Fault Diagnosis. In: 18th International Conference on Automation and Computing (ICAC), 2012. IEEE, Loughborough, UK, pp. 1-6. ISBN 9781908549006
Alzarok, Hamza, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) Assessment of the positioning accuracy of a small articulated robot during machining operations. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 106-111. ISBN 9781862181212
Amin, Sara Raouf Muhamad (2017) Factors Influencing the Adoption of Location Based Identification in the Kurdistan Region of Iraq. Doctoral thesis, University of Huddersfield.
Amsdon, Timothy and Sibley, Martin J.N. (2013) Theoretical concepts and matlab modelling of VLC based MIMO systems. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 112-117. ISBN 9781862181212
An, Lili (2015) The development of advanced creep constitutive equations for high chromium alloy steel (P91) at transition stress range. Doctoral thesis, University of Huddersfield.
An, Lili, Xu, Qiang and Lu, Zhongyu (2013) The development of advanced creep constitutive equations for high chromium steel P91 at low stress range. In: 6th International “HIDA” Conference on Life/Defect Assessment & Failures in High Temperature Plant, 2-4 December 2013, Japan.
An, Lili, Xu, Qiang, Xu, Donglai and Lu, Zhongyu (2012) Preliminary analysing of experimental data for the development of high Cr Alloy Creep damage Constitutive Equations. In: 18th International Conference on Automation and Computing (ICAC), 2012. ICAC 2012 . IEEE, Loughborough, UK, pp. 1-5. ISBN 978-1-4673-1722-1
An, Lili, Xu, Qiang, Xu, Donglai and Lu, Zhongyu (2013) Review of creep deformation and rupture mechanism of P91 alloy for the development of creep damage constitutive equations under low stress level. In: Proceedings of the 2013 World Congress in Computer Science and Computer Engineering and Application. CSREA Press, pp. 184-187. ISBN 1-60132-238-0
Andrade, A. Ramos and Teixeira, P. Fonseca (2011) Uncertainty in Rail-Track Geometry Degradation: Lisbon-Oporto Line Case Study. Journal of Transportation Engineering, 137 (3). pp. 193-200. ISSN 0733-947X
Andrade, António Ramos and Teixeira, P. F. (2013) Hierarchical Bayesian modelling of rail track geometry degradation. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 227 (4). pp. 364-375. ISSN 0954-4097
Andrade, António Ramos and Teixeira, P. Fonseca (2012) Biobjective Optimization Model for Maintenance and Renewal Decisions Related to Rail Track Geometry. Transportation Research Record: Journal of the Transportation Research Board, 2261 (-1). pp. 163-170. ISSN 0361-1981
Andrade, António Ramos and Teixeira, P. Fonseca (2015) Statistical modelling of railway track geometry degradation using hierarchical Bayesian models. Reliability Engineering & System Safety. ISSN 0951-8320
Andrade, António Ramos and Teixeira, Paulo Fonseca (2012) A Bayesian model to assess rail track geometry degradation through its life-cycle. Research in Transportation Economics, 36 (1). pp. 1-8. ISSN 07398859
Andrade, António Ramos and Teixeira, Paulo Fonseca (2013) Unplanned-maintenance needs related to rail track geometry. Proceedings of the ICE - Transport, 167 (6). pp. 400-410. ISSN 0965-092X
Angelis-Dimakis, Athanasios, Alexandratou, Anastasia and Balzarini, Anna (2016) Value chain upgrading in a textile dyeing industry. Journal of Cleaner Production, 138 (2). pp. 237-247. ISSN 0959-6526
Angelis-Dimakis, Athanasios, Arampatzis, George and Assimacopoulos, Dionysis (2011) Monitoring the sustainability of the Greek energy system. Energy for Sustainable Development, 16 (1). pp. 51-56. ISSN 0973-0826
Angelis-Dimakis, Athanasios, Arampatzis, George and Assimacopoulos, Dionysis (2016) Systemic eco-efficiency assessment of meso-level water use systems. Journal of Cleaner Production, 138 (2). pp. 195-207. ISSN 0959-6526
Angelis-Dimakis, Athanasios, Biberacher, Markus, Dominguez, Javier, Fiorese, Giulia, Gadocha, Sabine, Gnansounou, Edgard, Guariso, Giorgio, Kartalidis, Avraam, Panichelli, Luis, Pinedo, Irene and Robba, Michela (2010) Methods and tools to evaluate the availability of renewable energy sources. Renewable and Sustainable Energy Reviews, 15 (2). pp. 1182-1200. ISSN 1364-0321
Angelis-Dimakis, Athanasios, Trogadas, Panos, Arampatzis, George and Assimacopoulos, Dionysis (2008) Cost Effectiveness Analysis for Renewable Energy Sources Integration in the Island of Lemnos, Greece. In: Proceedings of the International Congress on International Environmental Modelling and Software (iEMSs 2008). International Environmental Modelling and Software Society, Barcelona, Catalonia, pp. 1215-1222. ISBN 978-84-7653-074-0
Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Fengshou, Gu (2011) Modelling the Dynamic Behaviour of the Wheel-Rail Interface by Using a Novel 3D Wheel-Rail Contact Model. In: 5th IET Conference on Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 29-30 November 2011, Derby Conference Centre, UK.
Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Dynamic simulation of a roller rig. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 51-56. ISBN 978-1-86218-106-9
Aouad, Ghassan, Wu, Song, Lee, Angela and Onyenobi, Timothy (2011) Computer Aided Design Guide for Architecture, Engineering and Construction. Routledge. ISBN 9780415495073
Appadoo, Robin (2021) Condition Monitoring and Fault Diagnosis of Fluid Machines in Process Industries. Doctoral thesis, University of Huddersfield.
Appadoo, Robin, Ball, Andrew and Gu, Fengshou (2010) Optimizing condition monitoring techniques applied to a three stage reciprocating compressor in a FMCG industry. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 185. ISBN 9781862180932
Arampatzis, George, Angelis-Dimakis, Athanasios, Blind, Michiel and Assimacopoulos, Dionysi (2016) A web-based Toolbox to support the systemic eco-efficiency assessment in water use systems. Journal of Cleaner Production, 138 (2). pp. 181-194. ISSN 0959-6526
Arebi, Lufti (2014) The use of passive telemetry in rotor fault diagnosis. Doctoral thesis, University of Huddersfield.
Arebi, Lufti, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Investigation of Wireless Sensor Deployed on a Rotating Shaft and Its Potential for Machinery Condition Monitoring. In: 23rd International Congress on Condition Monitoring and diagnostic Engineering Management, June 28-July 2, 2010, Japan. (Unpublished)
Arebi, Lufti, Gu, Fengshou, Hu, Niaoqin and Ball, Andrew (2011) Misalignment Detection using a Wireless Sensor Mounted on a Rotating Shaft. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management. COMADEM, Stavanger, Norway, pp. 1289-1299. ISBN 0954130723
Arebi, Lufti, Gu, J., Ball, Andrew and Gu, Fengshou (2010) Investigation of a Rotating Shaft with a Novel Integrated Wireless Accelerometer. In: The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England, UK.
Arif, S. (2012) Electronic Braille Document Reader. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 142. ISBN 978-1-86218-106-9
Ashari, Djoni, Lane, Mark, Gu, Fengshou and Ball, Andrew (2014) Detection and Diagnosis of Broken Rotor Bar Based on the Analysis of Signals from a Variable Speed Drive. In: 3rd International Workshop and Congress on eMaintenance, 17th - 18th June 2014, Lulea, Sweden.
Ashari, Djoni, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Artificial intelligence-based condition monitoring for practical electrical drives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 143. ISBN 978-1-86218-106-9
Ashraf, Naveed, Fieldhouse, John D. and Talbot, Chris J. (2005) A study of the interface pressure distribution between pad and rotor. In: Twelfth International Congress on Sound and Vibration, 11th - 14th July 2005, Lisbon, Portugal. (Unpublished)
Ashraf, Naveed, Talbot, Chris J., Fieldhouse, John D. and Steel, W.P (2005) Modelling friction-induced Vibrations using Spectral Methods. In: Symposium on Numerical Simulation in Automotive Engineering, Graz, Austria. (Unpublished)
Assaeh, Mohamed. I.M. (2019) FAULT DIAGNOSIS OF MECHANICAL SYSTEMS BASED ON ELECTRICAL SUPPLY CHARACTERISTICS. Doctoral thesis, University of Huddersfield.
Atkinson, Paul (2004) Post Industrial Manufacturing Systems: The impact of emerging technologies on design, craft and engineering processes. In: Challenging Craft, 8-10 Sptember 2004, Gray's School of Art, Aberdeen.
Atmoko, H., Tan, D. C., Tian, G.Y. and Fazenda, Bruno (2008) Accurate sound source localization in a reverberant environment using multiple acoustic sensors. Measurement Science and Technology, 19 (2). 024003. ISSN 0957-0233
Avis, M.R., Fazenda, Bruno and Davies, W.J. (2007) Thresholds of detection for changes to the Q factor of low-frequency modes in listening environments. AES, 55 (7/8). pp. 611-622. ISSN 1549-4950
Aziz, Zeeshan, Barker, Chris and Tezel, Algan (2016) Using quantitative approaches to enhance construction performance through data captured from mobile devices. In: Research Methodology in the Built Environment: A Selection of Case Studies. Routledge, Abingdon, YK, pp. 79-91. ISBN 9781138849464
Aziz, Zeeshan and Tezel, Algan (2016) Lean and BIM – A Synergistic Relationship. UK Construction Excellence, 2016 (1). p. 40.
Ball, Andrew, Gu, Fengshou and Liu, S (2002) The on-line detection of engine misfire at low speed using multiple feature fusion with fuzzy pattern recognition. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (5). pp. 391-402. ISSN 0954-4070
Ball, Andrew, Wang, Tian T., Tian, X. and Gu, Fengshou (2016) A robust detector for rolling element bearing condition monitoring based on the modulation signal bispectrum,. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.
Balouchi, Farouk and Bevan, Adam (2016) Detecting Railway Under-Track Voids using Multi-Train In-Service Vehicle Accelerometer. In: 7th IET Conference on Railway Condition Monitoring, 27-28 September 2016, Birmingham, UK.
Banawi, K.A., Fieldhouse, John D. and Talbot, Chris J. (2000) 3-Dimensional animation of a real disc brake generating noise. In: 25th ISMA Noise and Vibration Conference, 13th - 15th September 2000, Katholiecke Universiteit Leuven, Belgium.
Banieghbal, M.R., Weston, William and Pountney, D.C. (1989) A numerical study of turbulent flow characteristics of servo‐valve orifices. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power Engineering 1989 (vol 203), 203 (21). pp. 139-147. ISSN 0954-4046
Banitalebi Dehkordi, H., Kollar, László E., Farzaneh, Masoud, Camirand, P. and D'Amours, C. (2010) Introduction, instrumentation and calibration of CIGELE atmospheric icing research wind tunnel. Research Report. University of Quebec. (Unpublished)
Baqqar, Mabrouka, Tran, Van Tung, Gu, Fengshou and Ball, Andrew (2013) Comparison between adaptive neuro-fuzzy inference system and general regression neural networks for gearbox fault detection using motor operating parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 118-126. ISBN 9781862181212
Bartak, Roman and McCluskey, T.L. (2005) Competition on Knowledge Engineering for Planning and Scheduling. In: ICAPS 2005: The International Conference on Automated Planning and Scheduling, 5th - 10th June 2005, Monterey, California, USA. (Unpublished)
Bartak, Roman and McCluskey, T.L. (2005) KE Competition: an overview. In: Proceedings of the First International Competition on Knowledge Engineering. UNSPECIFIED. (Unpublished)
Basha, Majed (2019) Design and implementation of a tuned Analog Front-End for extending VLC transmission range. Masters thesis, University of Huddersfield.
Basu, Rajlaxmi (2018) Estimation of Input Variable as Initial Condition of a Chaos Based Analogue to Digital Converter. Doctoral thesis, University of Huddersfield.
Bayar, M.S, Aziz, Zeeshan, Tezel, Algan, Arayici, Y. and Biscaya, S. (2016) Optimizing Handover of As-Built Data Using BIM for Highways. In: 1st International (UK) BIM Academic Forum Conference, 13-15 September 2016, Glasgow, Scotland.
Baydar, N, Ball, Andrew and Payne, Bradley (2002) Detection of incipient gear failures using statistical techniques. IMA Journal of Management Mathematics, 13 (1). pp. 71-79. ISSN 1471-678X
Beake, B. D., Harris, Adrian L., Fox-Rabinovich, German, Rauh, Gerhard, Davies, M. I., Armstrong, David and Vishnyakov, Vladimir (2016) Nanomechanical testing of thin films to 950 °C. In: 15th International Conference on Plasma Surface Engineering PSE 2016, 12-16th September 2016, Germany. (Submitted)
Beaucamp, Anthony, Namba, Yoshiharu, Messelink, Wilhelmus, Walker, David D., Charlton, Phillip and Freeman, Richard (2014) Surface integrity of fluid jet polished tungsten carbide. Procedia CIRP, 13. pp. 377-381. ISSN 2212-8271
Becker, Christoph, Chitchyan, Ruzanna, Duboc, Leticia, Easterbrook, Steve, Penzenstadler, Birgit, Seyff, Norbert and Venters, Colin (2015) Sustainability Design and Software: The Karlskrona Manifesto. In: 37th International Conference on Software Engineering, 16th - 24th May 2015, Florence, Italy.
Beik, Omid and Schofield, Nigel (2017) High Voltage Hybrid Generator and Conversion System for Wind Turbine Applications. IEEE Transactions on Industrial Electronics, 65 (4). pp. 3220-3229. ISSN 1557-9948
Benghozzi, A., Shao, Y., Shi, Z., Gu, Fengshou and Ball, Andrew (2012) The Diagnosis of a Gearbox Transmission System Using Electrical Control Parameters. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. IEEE, Loughborough, UK, pp. 1-6. ISBN 9781908549006 / 9781467317221
Bentley, Peter J. and Wakefield, Jonathan P. (1997) Conceptual Evolutionary Design by a Genetic Algorithm. Engineering design and automation, 3 (2). pp. 119-131. ISSN 1077-2642
Bentley, Peter J. and Wakefield, Jonathan P. (1996) The Evolution of Solid Object Designs using Genetic Algorithms. In: Modern Heuristic Search Methods. John Wiley & Sons Inc., Chichester, pp. 199-215. ISBN 978-0-471-96280-9
Bentley, Peter J. and Wakefield, Jonathan P. (1998) Finding acceptable solutions in the pareto-optimal range using multiobjective genetic algorithms. In: Soft Computing in Engineering Design and Manufacturing. Springer-Verlag, pp. 231-240. ISBN 3-540-76214-0
Bentley, Peter J. and Wakefield, Jonathan P. (1996) Generic Representation of Solid-Object Geometry for Genetic Search. Microcomputers in Civil Engineering, 11 (3). pp. 153-161. ISSN 1093-9687
Bentley, Peter J. and Wakefield, Jonathan P. (1998) Generic evolutionary design. In: Soft Computing in Engineering Design and Manufacturing. Springer-Verlag, pp. 289-298. ISBN 3-540-76214-0
Bentley, Peter J. and Wakefield, Jonathan P. (1996) Hierarchical Crossover in Genetic Algorithms. In: Proceedings of the 1st On-line Workshop on Soft Computing (WSC1), 19-30 August 1996, Nagoya University, Japan.
Bentley, Peter J. and Wakefield, Jonathan P. (1996) Overview of a Generic Evolutionary Design System. In: Proceedings of the 2nd On-line Workshop on Evolutionary Computation (WEC2), 4-22 March 1996, Nagoya University, Japan.
Bentley, Peter J. and Wakefield, Jonathan P. (1995) The Table: An Illustration of Evolutionary Design using Genetic Algorithms. In: Genetic Algorithms in Engineering Systems: Innovations and Applications, 1995. GALESIA. First International Conference on (Conf. Publ. No. 414). IEEE, London, pp. 412-418. ISBN 0-85296-650-4
Benzair, B., Glover, Ian and Gardiner, John G.G. (1991) Vertical propagation of radio signals in an eleven storey building at 144 MHz. In: Sixth International Conference on Mobile Radio and Personal Communications. Peter Peregrinus, pp. 83-86. ISBN 9780852965306
Berberkic, Sanjin (2014) Measurement of small signal variations using one-dimensional chaotic maps. Doctoral thesis, University of Huddersfield.
Berry, E., Kukla, Peter, Gu, Fengshou and Ball, Andrew (2004) Diesel engine pollutant prediction and remote vehicle monitoring Part I: The prediction of diesel engine smoke emission using neural networks. International Journal of COMADEM, 7 (4). ISSN 1363-7681
Bevan, Adam (2015) Effective Management of the Wheel-Rail Interface on Light-rail Networks. In: 1st Annual WRI EU Conference, 21st - 23rd October 2015, Derby, UK. (Unpublished)
Bevan, Adam (2016) Inspecting the Depth of Wheel Tread Surface Damage Using Magnetic Flux Leakage. In: Wheelsets: Less cost, less risk - the challenge, 15th March 2016, Institute of Mechanical Engineers, London.
Bevan, Adam (2015) Use of Magnetic Flux Techniques to Detect Wheel Tread Damage. In: RRUKA Annual Conference 2015, 5th November 2015, London. (Unpublished)
Bevan, Adam (2017) Wheel Damage Research. In: ICRI Workshop, 01/02/2017, London. (Unpublished)
Bevan, Adam and Jaiswal, Jay (2017) Rail steel metallurgy: why different elements are important and latest ‘mixes’. In: PWI London Technical Seminar: Rails: On Our Mettle, 24th May 2017, London, UK. (Unpublished)
Bevan, Adam and Molyneux-Berry, Paul (2012) Optimisation of Wheelset Maintenance using Whole System Cost Modelling. In: Rail Research UK Association Annual Conference, 7th November 2012, London. (Unpublished)
Bevan, Adam and Molyneux-Berry, Paul (2014) Optimisation of Wheelset Maintenance: Current Research Activities. In: Modern Railways Golden Spanners Conference, November 2014, London. (Unpublished)
Bevan, Adam, Molyneux-Berry, Paul, Eickhoff, Bridget and Burstow, Mark (2013) Development and Validation of a Wheel Wear and Rolling Contact Fatigue Damage Model. Wear, 307 (1-2). pp. 100-111. ISSN 0043-1648
Bevan, Adam, Molyneux-Berry, Paul, Mills, Steve, Rhodes, Andy and Ling, Daniel (2013) Optimisation of Wheelset Maintenance using Whole System Cost Modelling. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. ISSN 0954-4097
Beveridge, Carl, Fieldhouse, John D. and Talbot, Chris J. (2000) The technique of holographic interferometry used to investigate a noisy commercial disc brake. In: 25th ISMA Noise and Vibration Conference, 13th - 15th September 2000, Katholiecke Universiteit Leuven, Belgium.
Bezin, Yann, Iwnicki, S. and Guerguil, N. (2001) Modelling leafspring suspensions for virtual acceptance test. In: 2nd international workshop on freight vehicle design, April 2001, Manchester UK. (Unpublished)
Bhat, Nikhil and Barrans, Simon (2008) Design and test of a Pareto optimal flat pad aerostatic bearing. Tribology International, 41 (3). pp. 181-188. ISSN 0301679X
Billington, Peter E., Barnes, Christopher M. and Wakefield, Jonathan P. (2001) Methods and systems of monitoring traffic flow. US 6177886.
Bills, Paul J., Blunt, Liam and Jiang, Xiang (2007) Development of a technique for accurately determining clinical wear in explanted total hip replacements. Wear, 263 (7-12). pp. 1133-1137. ISSN 0043-1648
Bills, Paul J., Blunt, Liam and Jiang, Xiang (2006) A metrology solution for determination of form deviation and wear in orthopaedic joint replacements. In: 33rd Leeds-Lyon Symposium on Tribology, Tuesday 12th - Friday 15th September 2006, Trinity and all Saints College, Leeds. (Unpublished)
Bills, Paul J., Blunt, Liam, Racasan, Radu, Skinner, J. and Hart, A. J. (2013) Accurate determination of material loss at the taper interface of retrieved metal-on-metal hip replacements. In: 19th International Conference on Wear of Materials, 14-18th April 2013, Portland, Oregon USA. (Submitted)
Bills, Paul J., Racasan, Radu, Hart, A.J., Skinner, J., Jiang, Xiang and Blunt, Liam (2012) Using metrology to bridge the gap in understanding between engineering and biological failure: the case of metal-on-metal hip replacements. In: 1st Annual EPSRC Manufacturing the Future Conference, 19th-20th September 2012, Loughborough, UK.
Binzabiah, Reyad and Wade, Steve (2012) An Approach to Developing an Ontology that Represents Knowledge Embedded in Filmed Materials. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 91-97. ISBN 978-1-86218-106-9
Binzabiah, Reyad and Wade, Steve (2012) Modeling of an ontology to represent the knowledge embedded in filmed materials. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9
Biotto, Clarissa (2019) Integration of Overlapped Design and Construction Stages Through Location-Based Planning Tools. Doctoral thesis, University of Huddersfield.
Biotto, Clarissa, Kagioglou, Mike, Koskela, Lauri and Tzortzopoulos, Patricia (2017) Comparing Production Design Activities and Location-Based Planning Tools. In: 25th Annual Conference of the International Group for Lean Construction, 9th-12th July 2017, Heraklion, Greece.
Blunt, Liam (2006) Metrology of MST and microfluidic devices using white light interferometery and novel surface metrology characterisation. In: Micro and Nano Technology (MNT) Measurement Club, 1-day meeting, The Measurement and Characterisation of MST Devices (MEMS), Monday 27 February 2006, National Physical Laboratory, Hampton Road, Teddington, Middlesex TW11 0LW. (Unpublished)
Blunt, Liam (2007) Next Generation Surface Metrology: Structured and Freeform Surfaces. In: Asia Pacific Conference on Optics Manufacture 2007 (APCOM2007), 11 -13 January 2007, The Hong Kong Polytechnic University. (Unpublished)
Blunt, Liam (2007) The role of Tribology and Metrology in the Latest Development of Bio-materials. In: Proceedings of the European Conference on Tribology (ECOTRIB). Slovensko društvo za tribologijo, Ljubljana, Slovenia, pp. 465-482.
Blunt, Liam, Armstrong, J. and Blunt, R. (2005) The use of advanced 3D surface metrology for the characterisation of epi-wafers and Si structures. Physica Status Solidi (c), 2 (4). pp. 1251-1258. ISSN 1610-1634
Blunt, Liam, Bills, Paul J., Jiang, Xiang and Chakrabarty, G. (2008) Improvement in the assessment of wear of total knee replacements using coordinate-measuring machine techniques. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 222 (3). pp. 309-318. ISSN 0954-4119
Blunt, Liam, Jiang, Xiang, Leach, Richard K., Harris, Peter M. and Scott, Paul J. (2007) The development of user-friendly software measurement standards for surface topography software assessment. Wear, 264 (5-6). pp. 389-393. ISSN 0043-1648
Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2005) Advances in micro and nano-scale surface metrology. Key Engineering Materials, 295-29. pp. 431-436. ISSN 1013-9826
Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2003) Advances in micro and nano-scale surface metrology. In: ISMTII 2003, The Sixth International Symposium on Measurement Technology and Intelligent Instruments, 28 November - 1 December 2003, Academic Building, Hong Kong University of Science and Technology, Kowloon, Hong Kong.
Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2007) A New Approach to Surface Metrology - Structured Surfaces. In: Proceedings of the 7th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen) - Bremen, Germany, 2007. euspen, Bremen, pp. 254-257. ISBN 978-0-9553082-2-2
Blunt, Liam, Leach, Richard K., Scott, Paul J., Harris, Peter M., Xiao, Shaojun, Li, T., Parkin, G. and Jiang, Xiang (2005) Development of “softgauges” for surface profile metrology. In: 5th Euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)
Blunt, Liam, Muhamedsalih, Hussam and Elrawemi, Mohamed (2015) Implementation of wavelength scanning interferometry for R2R flexible PV barrier films. In: EUSPEN 15th International Conference & Exhibition. EUSPEN, Leuven, Belgium. ISBN 978-0-9566790-7-9
Blunt, Liam and Thomas, T.R. (2004) Wear ranking of hard on hard bearings for prosthetic hip joints. Wear, 257. pp. 1208-1212. ISSN 0043-1648
Blunt, Liam, Xiao, Shaojun, Jiang, Xiang and Scott, Paul J. (2005) Geometrical characterisation of MST and microfluidic devices using novel surface metrology techniques. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)
Blunt, Liam, Zhang, Hongyu, Barrans, Simon, Jiang, Xiang and Brown, Leigh (2008) What results in fretting wear on polished femoral stems. Tribology International, 42 (11). pp. 1605-1614. ISSN 0301-679X
Borisov, Oleg (2015) New optical sensing system applied to taut wire based straightness measurement. Doctoral thesis, University of Huddersfield.
Brennan, James K. (2010) Algorithms for Surface Texture Profiles and Parameters. Doctoral thesis, University of Huddersfield.
Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Approximation of surface roughness profiles and parameters. In: International Conference on Advanced Mathematical and Computational Tools in Metrology (AMCTM 2005), 27–29 June, 2005, Instituto Português da Qualidade, Caparica, Portugal. (Unpublished)
Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Propagation of uncertainty in discretely sampled surface roughness profiles. Advanced mathematical and computational tools in metrology VII. pp. 271-275.
Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Reconstruction of continuous surface profiles from discretely sampled data. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)
Brennan, James K., Jiang, Xiang, Crampton, Andrew and Leach, Richard K. (2006) Propagation of measurement uncertainty for surface texture parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.
Brennan, James K., Mason, John C., Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2004) Approximation of surface texture profiles and parameters. In: 4th International Conference of the European Society for Precision Engineering and Nanotechnology, euspen, 30th May - 3rd June 2004, Scottish Exhibition and Conference Centre (SECC), Glasgow. (Unpublished)
Brethee, Khaldoon F., Gu, Fengshou and Ball, Andrew (2016) Frictional effects on the dynamic responses of gear systems and the diagnostics of tooth breakages. Systems Science & Control Engineering, 4 (1). pp. 270-284. ISSN 2164-2583
Brethee, Khaldoon F., Zhang, Ruiliang, Hamad, Naima, Gu, Fengshou and Ball, Andrew (2016) Influence of Lubricant Starvation on Gearbox Vibration Signatures for Condition Monitoring. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.
Brethee, Khaldoon F., Zhen, Dong, Gu, Fengshou and Ball, Andrew D. (2017) Helical gear wear monitoring: Modelling and experimental validation. Mechanism and Machine Theory, 117. pp. 210-229. ISSN 0094-114X
Brethee, Khaldoon F., Zhou, Xiaojun, Gu, Fengshou and Ball, Andrew (2016) Frictional Effects on the Diagnostics of Helical Gear Tooth Defects. In: IncoME 2016, 30th - 31st August 2016, Manchester Conference Centre, Manchester.
Brown, L. and Blunt, Liam (2008) Surface Metrology for the Automotive Industry. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.
Brown, Leigh, Zhang, H., Blunt, Liam and Barrans, Simon (2007) Reproduction of fretting wear at the stem—cement interface in total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 221 (8). pp. 963-971. ISSN 0954-4119
Bruton, David (2018) Investigation of a Compact Accelerator for Radioisotope Production. Doctoral thesis, University of Huddersfield.
Bryant, David, Crampton, Andrew, Fieldhouse, John D. and Talbot, Chris J. (2006) Discussion of characteristics of brake judder and the necessary data acquisition system for complete analysis. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.
Bryant, David, Fieldhouse, John D., Crampton, Andrew and Talbot, Chris J. (2008) Hot Judder Investigations Using a High Speed Brake Dynamometer. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.
Buhafa, Adel M, Al-Nedawe, Basman, Sibley, Martin J.N. and Mather, Peter (2013) MATLAB Simulation for DiPPM over Diffuse Optical Wireless Communications. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 127-132. ISBN 9781862181212
Buhafa, Adel M and Sibley, Martin J.N. (2010) Performance of Di-code Pulse Position Modulation Technique in Diffuse Indoor Wireless Optical Communication Systems. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 188. ISBN 9781862180932
Burrows, J., Griffiths, B. and Scott, Paul J. (2001) The use of vectors for defining the three-dimensional texture and asymmetric directionality of turned specimens. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215 (2). pp. 125-134. ISSN 0954-4054
Buselli, E., Smith, Alan M., Grover, Liam M., Levi, A., Allman, R., Mattoli, V., Menciassi, A. and Beccai, L. (2011) Development and characterization of a bio-hybrid skin-like stretchable electrode. Microelectronic Engineering, 88 (8). pp. 1676-1680. ISSN 0167-9317
Button, M.D., Gardiner, J.G. and Glover, Ian (2002) Measurement of the impulsive noise environment for satellite-mobile radio systems at 1.5 GHz. IEEE Transactions on Vehicular Technology, 51 (3). pp. 551-560. ISSN 0018-9545
Bølviken, Trond and Koskela, Lauri (2016) Why Hasn’t Waste Reduction Conquered Construction? In: 24th Annual Conference of the International Group for Lean Construction, 18th - 24th July 2016, Boston, USA.
Campbell, Grant M. and Belton, Daniel J. (2016) Setting up new chemical engineering degree programmes: Exercises in design and retrofit within constraints. Education for Chemical Engineers, 17. pp. 1-13. ISSN 1749-7728
Carter, G, Bailey, Paul, Armour, DG and Collins, R (1982) The deduction of continuously distributed activation energy site populations from tempering schedules. Vacuum, 32 (5). pp. 233-241. ISSN 0042-207X
Chai, John (2003) One-dimensional transient radiation heat transfer modeling using a finite-volume method. Numerical Heat Transfer, Part B: Fundamentals, 44 (2). pp. 187-208. ISSN 1040-7790
Chai, John (2004) Transient radiative transfer in irregular two-dimensional geometries. Journal of Quantitative Spectroscopy and Radiative Transfer, 84 (3). pp. 281-294. ISSN 0022-4073
Chai, John, Hsu, P-f and Lam, Y.C. (2004) Three-dimensional transient radiative transfer modeling using the finite-volume method. Journal of Quantitative Spectroscopy and Radiative Transfer, 86 (3). pp. 299-313. ISSN 0022-4073
Chai, John, Lee, HaeOk S. and Patankar, Suhas V. (1994) Finite volume method for radiation heat transfer. Journal of Thermophysics and Heat Transfer, 8 (3). pp. 419-425. ISSN 0887-8722
Chai, John, Lee, HaeOk S. and Patankar, Suhas V. (1994) Improved Treatment of Scattering Using the Discrete Ordinates Method. Journal of Heat Transfer, 116 (1). pp. 260-263. ISSN 0022-1481
Chai, John, Parthasarathy, Girija, Lee, HaeOk S. and Patankar, Suhas V. (1995) Finite volume radiative heat transfer procedure for irregular geometries. Journal of Thermophysics and Heat Transfer, 9 (3). pp. 410-415. ISSN 0887-8722
Chai, John and Patankar, Suhas V. (1993) Laminar Natural Convection in Internally Finned Horizontal Annuli. Numerical Heat Transfer, Part A: Applications, 24 (1). pp. 67-87. ISSN 1040-7782
Chai, John, Patankar, Suhas V. and Lee, HaeOk S. (1994) Evaluation of spatial differencing practices for the discrete-ordinates method. Journal of Thermophysics and Heat Transfer, 8 (1). pp. 140-144. ISSN 0887-8722
Charitopoulos, Romanos and Sibley, Martin J.N. (2006) Power Spectral Density of Dicode Pulse Position Modulation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-5.
Charlton, Matthew (2014) Cost Effective Manufacturing and Optimal Design of X-Stream Trims for Severe Service Control Valves. Masters thesis, University of Huddersfield.
Charlton, P. and Blunt, Liam (2007) Surface and form metrology of polished “freeform” biological surfaces. Wear, 264 (5-6). pp. 394-399. ISSN 0043-1648
Charlton, P., Blunt, Liam and Beaucamp, A. (2005) Machining of "freeform" biological surfaces on an advanced 7-axis CNC polishing machine. In: International Conference on Precision Machining, ICPM 2005, 2005, Vienna, Austria. (Unpublished)
Charlton, Phillip (2011) The Application of Zeeko Polishing Technology to Freeform Femoral Knee Replacement Component Manufacture. Doctoral thesis, University of Huddersfield.
Che, Y., Long, Hua, Lu, Joan and Yip, Yau Jim (2007) An Investigation in Self-Similar Study and Implication of 3G Mobile Traffic. In: The 2007 World Congress in Computer Science, Computer Engineering, & Applied Computing, 25 - 28th June, 2007, Las Vegas, Nevada, USA.
Chen, X.Y., Toh, K.C., Chai, John and Yang, C. (2004) Developing pressure-driven liquid flow in microchannels under the electrokinetic effect. International Journal of Engineering Science, 42 (5). pp. 609-622.
Chen, Xun (2008) Machining Dynamics in Grinding Processes. In: Machining Dynamics: Fundamentals, Applications and Practices. Springer Series in Advanced Manufacturing . Springer, London, pp. 233-262. ISBN 978-1-84628-367-3
Chen, Xun and Feng, Zhengming (2003) Effectiveness of Laser Cleaning for Grinding Wheel Loading. Key Engineering Materials, 238-39. pp. 289-294. ISSN 1013-9826
Chen, Xun, Feng, Zhi Jing and Pashby, I.R. (2004) Comparison of Laser Cleaning of A1(2)O(3) and CBN Grinding Wheels. Key Engineering Materials, 257-25. pp. 365-370. ISSN 1662-9795
Chen, Xun, Feng, Zhi Jing and Pashby, I.R. (2004) A study on laser cleaning of A1(2)O(3)grinding wheels. Key Engineering Materials, 257-25. pp. 359-364. ISSN 1662-9795
Chen, Xun and Griffin, James Marcus (2007) The Classification of rubbing, ploughing and cutting during grinding and the comparison of different evolutionary inspired classification techniques. In: 40th CIRP International Seminar on Manufacturing Systems, 30th May - 1st June 2007, Liverpool, UK. (Unpublished)
Chen, Xun and Griffin, James Marcus (2009) Grinding Burn and Chatter Classification Using Genetic Programming. Key Engineering Materials, 389-39. pp. 90-95. ISSN 1662-9795
Chen, Xun and Griffin, James Marcus (2007) Grinding acoustic emission classification in terms of mechanical behaviours. Key Engineering Materials, 329. pp. 15-20. ISSN 1662-9795
Chen, Xun and Griffin, James Marcus (2008) Grinding burn and chatter classification using genetic programming. Key Engineering Materials, 389-39. pp. 90-95. ISSN 1013-9826
Chen, Xun, Griffin, James Marcus and Liu, Qiang (2007) Mechanical and thermal behaviours of grinding acoustic emission. International Journal of Manufacturing Technology and Management, 12 (1/2/3). pp. 184-199. ISSN 1368-2148
Chen, Xun and Limchimchol, Thitikorn (2007) Grinding chatter monitoring using least square support vector machine. In: International Symposium on Advances in Abrasive Technology (ISAAT 2007), 26th - 28th Septmeber 2007, Dearborn, Michigan, USA. (Unpublished)
Chen, Z., Wang, T., Zhao, Z., Shen, J., Zhen, D. and Gu, Fengshou (2012) The Lightweight Design of a Dump Truck Frame based on Dynamic Responses. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. IEEE, Loughborough, UK, pp. 1-5. ISBN 978-1-4673-1722-1
Chitchyan, Ruzanna, Becker, Christoph, Betz, Stefanie, Duboc, Leticia, Penzenstadler, Birgit, Seyff, Norbert and Venters, Colin (2016) Sustainability design in requirements engineering: state of practice. In: Proceedings of the 38th International Conference on Software Engineering Companion. ICSE ('16). ACM, New York, USA, pp. 533-542. ISBN 978-1-4503-4205-6
Cornish, Matthew T. and Wakefield, Jonathan P. (1996) Automatically Locating an Area of interest and Maintaining a Reference Image to Aid the Real-Time Tracking of Objects. In: British Machine Vision Conference, 1996, University of Edinburgh.
Cory, James (1999) The measurement of volume fraction and velocity profiles in vertical and inclined multiphase flows. Doctoral thesis, University of Huddersfield.
Cowton, Christopher J. and Wirth, A. (1993) On the economics of cutting tools. International Journal of Production Research, 31 (10). pp. 2441-2446. ISSN 0020-7543
Crampton, Andrew, Talbot, Chris J. and Terry, J.L. (2007) Feature Extraction and Parameter Estimation as a Tool for Acoustical Analysis. In: Curve and Surface Fitting: Avignon 2006. Nashboro Press, Brentwood, TN, pp. 81-90. ISBN 978-0-9728482-8-2
Crosbee, David, Allen, Paul and Carroll, Robert (2017) Analysis of design and performance of tram-train profiles for dual-operation running. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 231 (5). pp. 578-597. ISSN 0954-4097
D'Arrigo, P., Diego, F. and Walker, D.D. (1996) Active Compensation of Flexure on the WHT ISIS Spectrograph. Monthly Notices of the Royal Astronomical Society, 281. pp. 679-686. ISSN 0035-8711
Dai, Xuewu, Sasloglou, Konstantinos, Atkinson, Robert, Strong, John, Panella, Isabella, Yun Cai, Lim, Mingding, Han, Chee Wei, Ang, Glover, Ian, Mitchell, John E., Schiffers, Werner and Dutta, Partha S. (2012) Wireless Communication Networks for Gas Turbine Engine Testing. International Journal of Distributed Sensor Networks, 2012. pp. 1-18. ISSN 1550-1329
Daraz, Alsadak Aboubaker Salem (2021) CONDITION MONITORING OF CENTRIFUGAL MACHINERY BASED ON ADVANCED DATA ANALYTIC TECHNIQUES AND MULTIPLE DATA SOURCES. Doctoral thesis, University of Huddersfield.
Dehe, Benjamin and Bamford, David (2013) A hybrid technique to solve MCDA problems in a UK National Health Service Trust. In: In 20th International Annual European Operations Management Association (EurOMA), 9-12 June2013, Dublin , Ireland. (Unpublished)
Del Zendeh, Elham (2019) The Impact of Occupants’ Behaviours on Energy Consumption in Multi-Functional Spaces. Doctoral thesis, University of Huddersfield.
Dewey, Christopher and Wakefield, Jonathan P. (2016) Audio interfaces should be designed based on data visualisation first principles. In: Proceedings of the 2nd AES Workshop on Intelligent Music Production. Audio Engineering Society.
Dewey, Christopher and Wakefield, Jonathan P. (2017) Formal usability evaluation of audio track widget graphical representation for two-dimensional stage audio mixing interface. In: AES 142nd International Conference, 20th-23rd May 2017, Berlin, DE.
Dewey, Christopher and Wakefield, Jonathan P. (2016) Novel Designs for the Audio Mixing Interface Based on Data Visualisation First Principles. In: 140th International AES Convention, 4th - 7th June 2016, Paris, France.
Dewey, Christopher and Wakefield, Jonathan P. (2013) Novel designs for the parametric peaking EQ user interface for single channel corrective EQ tasks. In: 134th Audio Engineering Society Convention, 4th-7th May, 2014, Rome, Italy.
Dewey, Christopher and Wakefield, Jonathan P. (2014) A guide to the design and evaluation of new user interfaces for the audio industry. In: 136th Audio Engineering Society Convention, 26th-29th April 2014, Berlin, Germany.
Dhimish, Mahmoud, Holmes, Violeta and Dales, Mark (2017) Parallel fault detection algorithm for grid-connected photovoltaic plants. Renewable Energy, 113. pp. 94-111. ISSN 0960-1481
Dhimish, Mahmoud, Holmes, Violeta, Dales, Mark, Mather, Peter, Sibley, Martin J.N., Chong, Benjamin and Zhang, Li (2017) The impact of cracks on the performance of photovoltaic modules. In: PowerTech, 2017 IEEE Manchester. IEEE. ISBN 978-1-5090-4237-1
Dhimish, Mahmoud, Holmes, Violeta, Dales, Mark, Mather, Peter, Sibley, Martin J.N., Chong, Benjamin and Zhnag, Li (2017) Fault detection algorithm for multiple GCPV array configurations. In: PowerTech, 2017 IEEE Manchester. IEEE. ISBN 978-1-5090-4237-1
Dhimish, Mahmoud, Holmes, Violeta, Dales, Mark and Mehrdadi, Bruce (2017) Effect of micro cracks on photovoltaic output power: case study based on real time long term data measurements. Micro & Nano Letters, 12 (10). pp. 803-807. ISSN 1750-0443
Dhimish, Mahmoud, Holmes, Violeta, Mehrdadi, Bruce and Dales, Mark (2018) Comparing Mamdani Sugeno fuzzy logic and RBF ANN network for PV fault detection. Renewable Energy, 117. pp. 257-274. ISSN 0960-1481
Dhimish, Mahmoud, Holmes, Violeta, Mehrdadi, Bruce and Dales, Mark (2017) Diagnostic method for photovoltaic systems based on six layer detection algorithm. Electric Power Systems Research, 151. pp. 26-39. ISSN 0378-7796
Dhimish, Mahmoud, Holmes, Violeta, Mehrdadi, Bruce and Dales, Mark (2017) Multi-layer photovoltaic fault detection algorithm. High Voltage. ISSN 2397-7264
Dhimish, Mahmoud, Holmes, Violeta, Mehrdadi, Bruce and Dales, Mark (2017) Simultaneous fault detection algorithm for grid-connected photovoltaic plants. IET Renewable Power Generation. ISSN 1752-1424
Dhimish, Mahmoud, Holmes, Violeta, Mehrdadi, Bruce and Dales, Mark (2017) The impact of cracks on photovoltaic power performance. Journal of Science: Advanced Materials and Devices, 2 (2). pp. 199-209. ISSN 2468-2179
Dhimish, Mahmoud, Holmes, Violeta, Mehrdadi, Bruce, Dales, Mark, Chong, Benjamin and Zhang, Li (2017) Seven indicators variations for multiple PV array configurations under partial shading and faulty PV conditions. Renewable Energy, 113. pp. 438-460. ISSN 0960-1481
Dhimish, Mahmoud, Holmes, Violeta, Mehrdadi, Bruce, Dales, Mark and Mather, Peter (2017) Detecting Defective Bypass Diodes in Photovoltaic Modules using Mamdani Fuzzy Logic System. Global Journal of Researches in Engineering: F Electrical and Electronics Engineering, 17 (5). pp. 33-44. ISSN 0975-5861
Dhimish, Mahmoud, Holmes, Violeta, Mehrdadi, Bruce, Dales, Mark and Mather, Peter (2017) Output Power Enhancement for Hot Spotted Polycrystalline Photovoltaic Solar Cells. IEEE Transactions on Device and Materials Reliability. ISSN 1558-2574
Dhimish, Mahmoud, Holmes, Violeta, Mehrdadi, Bruce, Dales, Mark and Mather, Peter (2018) PV output power enhancement using two mitigation techniques for hot spots and partially shaded solar cells. Electric Power Systems Research, 158. pp. 15-25. ISSN 0378-7796
Dhimish, Mahmoud, Holmes, Violeta, Mehrdadi, Bruce, Dales, Mark and Mather, Peter (2017) Photovoltaic fault detection algorithm based on theoretical curves modelling and fuzzy classification system. Energy, 140 (1). pp. 276-290. ISSN 0360-5442
Ding, Hao, Qi, Qunfen, Scott, Paul J. and Jiang, Xiang (2015) An ANOVA method of evaluating the specification uncertainty in roughness measurement. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK. ISBN 978-0-9566790-5-5
Ding, Hao and Scott, Paul J. (2012) Structure of Mathematical Morphology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 20-24. ISBN 978-1-86218-106-9
Ding, Hao, Scott, Paul J. and Jiang, Xiang (2013) Inverse problems of measurement with application on specification of surface profile. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 229. ISBN 9781862181212
Ding, Lieyun, Ma, Ling, Luo, Hanbin, Yu, Minghui and Wu, Xianguo (2011) Wavelet Analysis for tunneling-induced ground settlement based on a stochastic model. Tunnelling and Underground Space Technology, 26 (5). pp. 619-628. ISSN 0886-7798
Doel, A.L., Lee, J.H. and Walker, D.D. (2000) Adaptive secondary mirror developments at UCL. Proceedings of SPIE - The International Society for Optical Engineering, 4007. ISSN 0277-786X
Dutta, Dhrubajyoti (2018) Estimation of Chaos Function for the Implementation of High-Resolution Measurement System. Doctoral thesis, University of Huddersfield.
Dysko, A., Burt, Graeine, Moore, Philip J., Glover, Ian and McDonald, James R. (2008) Satellite Communication Based Loss-of-Mains Protection. In: The Institution of Engineering and Technology 9th International Conference on Developments in Power Systems Protection. IEEE, pp. 687-692. ISBN 9780863419027
de Oliveira Barbosa, Joao Manuel, Alves Costa, Pedro and Calçada, Rui (2015) Abatement of railway induced vibrations: Numerical comparison of trench solutions. Engineering Analysis with Boundary Elements, 55. pp. 122-139. ISSN 0955-7997
de Oliveira Barbosa, Joao Manuel and Kausel, Eduardo (2012) The thin-layer method in a cross-anisotropic 3D space. International Journal for Numerical Methods in Engineering, 89 (5). pp. 537-560. ISSN 1097-0207
de Oliveira Barbosa, Joao Manuel, Kausel, Eduardo, Azevedo, Alvaro and Calçada, Rui (2015) Formulation of the boundary element method in the wavenumber-frequency domain based on the thin layer method. Computers & Structures, 161. pp. 1-16. ISSN 0045-7949
de Oliveira Barbosa, Joao Manuel, Park, Joonsang and Kausel, Eduardo (2012) Perfectly matched layers in the thin layer method. Computer Methods in Applied Mechanics and Engineering, 217. pp. 262-274. ISSN 0045-7825
de S Neto, J.M.R., da Rocha Neto, J.S., Yang, Y. and Glover, Ian (2010) Plausibility of practical low-cost location using WSN path-loss law inversion. In: IET International Conference on Wireless Sensor Network 2010 (IET-WSN 2010). IET, pp. 260-265. ISBN 9781617825057
de S. Neto, J. M. R., Silva, J. J. C., Cavalcanti, T. C. M., Rodrigues, D. P., da Rocha Neto, J. S. and Glover, Ian (2010) Propagation measurements and modeling for monitoring and tracking in animal husbandry applications. In: 2010 IEEE Instrumentation & Measurement Technology Conference Proceedings. IEEE, pp. 1181-1185. ISBN 9781424428328
de Souza Neto, J.M.R., Silva, J.J.C., Cavalcanti, T.C.M., da Rocha Neto, J.S. and Glover, Ian (2012) Low-Cost WSN Monitoring and Location of Small Ruminants Using Transmission-Loss Inversion on Open Grassland in Brazil. Journal of Wireless Networking and Communications, 2 (5). pp. 101-110. ISSN 2167-7328
Egbele-Okoro, Kelvin Uwale (2020) Examining Health and Safety through the Lean Thinking Lens: The Case of The Nigerian Construction Industry. Doctoral thesis, University of Huddersfield.
Egorov, I.M. and Morrish, L. (2003) Digital approach for the solution of gearing problems. In: ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 2-6 September, 2003, Chicago Downtown Marriott Hotel, Chicago, Illinois. (Unpublished)
Elamin, Fathi (2009) Fault Detection and Diagnosis in Diesel Engine Using Acoustic Emission (AE). In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Elamin, Fathi (2013) Fault Detection and Diagnosis in Heavy Duty Diesel Engines Using Acoustic Emission. Doctoral thesis, University of Huddersfield.
Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2011) Diesel engine lubricating oil condition and performance monitoring using acoustic emission measurements. In: 24th International Congress on Condition Monitoring and Diagnostics Engineering Management (COMADEM 2011), 30th May - 1st June 2011, Stavanger, Norway. (Unpublished)
Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2010) Online Monitoring of Engine Oil Quality Based on AE Signal Analysis. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 116-123. ISBN 9781862180932
Elbarghathi, Fathalla, Ball, Andrew and Gu, Fengshou (2012) Two stage helical gearbox fault detection and diagnosis based on continuous wavelet transformation of time synchronous averaged vibration signals. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9
Elforjani, Badradin, Feng, Guojin, Gu, Fengshou and Ball, Andrew (2016) Energy Harvesting Based Wireless Sensor Nodes for The Monitoring Temperature of Gearbox. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.
Elforjani, Badradin, Xu, Yuandong, Brethee, Khaldoon F., Wu, Zhifei, Gu, Fengshou and Ball, Andrew (2017) Monitoring Gearbox Using a Wireless Temperature Node Powered by Thermal Energy Harvesting Module. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601
Elforjani, Badradin A. (2018) THERMAL ENERGY HARVESTING IN WIRELESS SENSOR NODES USED FOR CONDITION MONITORING. Doctoral thesis, University of Huddersfield.
Elrawemi, Mohamed, Blunt, Liam and Fleming, Leigh (2013) Process Practice and its Effects on Surface Defects on Flexible PV Barrier Films. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 49-54. ISBN 9781862181212
Elzawi, A. and Wade, Steve (2012) Barriers to ICT adoption in quality of engineering research in Libya : how to bridge the digital divide. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 144. ISBN 978-1-86218-106-9
Elzawi, A. and Wade, Steve (2012) Barriers to ICT adoption in quality of engineering research in Libya : how to bridge the digital divide? In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 98-103. ISBN 978-1-86218-106-9
Enbaya, Anwar, Asim, Taimoor, Mishra, Rakesh and Rao, Raj B. K. N. (2016) Numerical analysis of a railway compartment fire. In: Current Trends in Reliability, Availability, Maintainability and Safety: An Industry Perspective (Lecture Notes in Mechanical Engineering). Lecture Notes in Mechanical Engineering . Springer, pp. 471-484. ISBN 978-3319235967
Enshassi, Adnan, Choudhry, Rafiq and Abualqumboz, Moheeb (2009) Safety and Productivity in the Construction Industry. Arab Gulf Journal of Scientific Research, 27 (3). pp. 139-155. ISSN 10154442
Fan, Yibo Edward, Shi, Zhanqun, Harris, Georgina, Gu, Fengshou and Ball, Andrew (2006) Monitoring the Lubrication Condition of Rolling Element Bearings Using the Acoustic Emission Technique. In: ASME 8th Biennial Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Torino, Italy. (Unpublished)
Farhat, Zohaib Ali (2021) DESIGN AND SYSTEM IMPLEMENTATION OF PULSE POSITION MODULATION (PPM) BASED CODING SYSTEMS. Doctoral thesis, University of Huddersfield.
Farrar, Nicholas Stewart (2006) Tacit knowledge, learning and expertise in dry stone walling. Doctoral thesis, University of Huddersfield.
Farzaneh, Masoud, Jakl, Franc, Arabani, Mohsen P., Eliasson, Arni Jon, Fikke, Svein M., Gallego, Angel, Haldar, Asim, Isozaki, Masanori, Lake, Robert, Leblond, L., McDougall, Geoff, Minchin, Malcolm, Mito, Masataka, Pellet, Laure, Ronzio, Dario, Santana Lopez, Javier, Ryerson, Charles C., Shkaptsov, Vladimir, Turbin, Sergey, Wareing, Brian J., Zangl, Hubert, Anderson, B., Kermani, M., Kollar, László E., Menini, R., Peter, Z. and Volat, C. (2010) Systems for prediction and monitoring of ice shedding, anti-icing and de-icing for power line conductors and ground wires. Working Paper. CIGRE.
Fazenda, Bruno (2008) Localisation of sound sources using coincident microphone techniques. Proceedings of the Institute of Acoustics, 29 (7). pp. 106-115.
Fazenda, Bruno (2004) Perception of room modes in critical listening spaces. Doctoral thesis, University of Salford.
Fazenda, Bruno and Angus, J.A.S. (2003) Internal acoustic design for a multi-channel control room - measurement and perception. Proceedings of the Institute of Acoustics, 24 (8). pp. 1-10.
Fazenda, Bruno and Avis, M.R. (2004) Perception of low frequencies in small rooms. In: IV Congreso Ibero-Americano de Acústica, European Acoustics Symposium, September 2004, Guimarães Portugal.
Fazenda, Bruno, Avis, M.R. and Davies, W.J. (2007) Letters to the editor. AES, 54 (5). pp. 412-413. ISSN 1549-4950
Fazenda, Bruno, Avis, M.R. and Davies, W.J. (2002) Low frequency room excitation using Distributed Mode Loudspeakers. In: AES 21st International Conference, 1–3 June 2002, St. Petersburg, Russia.
Fazenda, Bruno, Avis, M.R. and Davies, W.J. (2005) Perception of modal distribution metrics in critical listening spaces—dependence on room aspect ratios. AES, 53 (12). pp. 1128-1141. ISSN 1549-4950
Fazenda, Bruno, Avis, M.R., Davies, W.J. and Jacobsen, F. (2004) Perception of modal distribution in critical listening spaces. In: The 11th International Congress on Sound and Vibration (ICSV11), 5-8 July 2004, Saint Petersburg, Russia.
Fazenda, Bruno, Avis, M.R. and Davies, William (2003) Difference limen for the Q-factor of room modes. In: AES 115th Convention, 10-13 October 2003, Jacob K. Javits Convention Center, New York, NY, USA.
Fazenda, Bruno and Davies, W.J. (2002) The views of recording studio control room users. Proceedings of the Institute of Acoustics, 23 (8). pp. 1-8.
Fazenda, Bruno, Gu, Fengshou, Ball, Andrew and Gilkes, Oliver S. (2008) Acoustic diagnosis of driving belt physical condition in enclosures. In: INTER-NOISE 2008, the 37th International Congress and Exposition on Noise Control Engineering, 26-29 October 2008, Shanghai, China.
Fazenda, Bruno, Holland, K.R. and Newell, P.R. (2005) Measurement of sound quality for critical listening. In: The 12th International Congress on Sound and Vibration (ICSV12), 11-14 July 2005, Lisbon, Portugal.
Fazenda, Bruno, Holland, K.R., Newell, P.R. and Castro, S.V. (2007) Modulation transfer function as a measure of room low frequency performance. Proceedings of the Institute of Acoustics, 28 (8). pp. 187-194.
Fazenda, Bruno, Holland, K.R., Newell, P.R. and Castro, S.V. (2007) The time domain performance of standard listening rooms: an assessment of current rooms and recommendations for achieving improved compatibility. Proceedings of the Institute of Acoustics, 27 (5). pp. 1-5.
Fazenda, Bruno and Romero-Perez, Julian (2009) 3-dimensional room impulse response measurements in critical listening spaces. Proceedings of the Institute of Acoustics, 30 (6). pp. 232-239.
Fazenda, Bruno and Wankling, Matthew (2008) Optimal modal spacing and density for critical listening. In: 125th AEC Convention, 2-5 October 2008, San Francisco, CA, USA.
Fazenda, Bruno M., Stephenson, Matthew and Goldberg, Andrew (2015) Perceptual thresholds for the effects of room modes as a function of modal decay. The Journal of the Acoustical Society of America, 137 (3). pp. 1088-1098. ISSN 0001-4966
Feng, G., Mustafa, A., Gu, J.X., Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) The Real-time Implementation of Envelope Analysis for Bearing Fault Diagnosis based on Wireless Sensor Network. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. ICAC 2013 . Brunel University, London, UK. ISBN 978-1908549082
Feng, Guojin (2016) Optimisation of vibration monitoring nodes in wireless sensor networks. Doctoral thesis, University of Huddersfield.
Feng, Guojin, Zhen, Dong, Aliwan, M., Gu, Fengshou and Ball, Andrew (2013) Investigation of Wireless Protocols for Remote Condition Monitoring. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 19-24. ISBN 9781862181212
Feng, Zhengming and Chen, Xun (2007) Image processing of grinding wheel surface. International Journal of Advanced Manufacturing Technology, 32 (1-2). pp. 27-33. ISSN 0268-3768
Fenton, Steven (2009) Objective Measurement of Sound Quality in Music Production. In: Annual Researchers' Conference 2009 (CEARC '09), Friday 11th December 2009, University Of Huddersfield. (Unpublished)
Fenton, Steven, Fazenda, Bruno and Wakefield, Jonathan P. (2009) Objective quality measurement of audio using multiband dynamic range analysis. In: Institute of Acoustics (IOA) Conference 2009 - Reproduced Sound, November 2009, Brighton.
Fenton, Steven and Lee, Hyunkook (2017) Alternative Weighting Filters for Multi-Track Program Loudness Measurement. In: AES 143rd Conference, New York, USA, October 2017, New York, USA.
Fenton, Steven and Lee, Hyunkook (2015) Towards a Perceptual Model of 'Punch' in Musical Signals. In: 139th International AES Convention, 29th October - 1st November 2015, New York, USA.
Fenton, Steven, Lee, Hyunkook and Wakefield, Jonathan P. (2016) Evaluation of a Perceptually-Based Model of "Punch" with Music Material. In: AES 141st Convention, 28th September-2 October 2016, LA Convention Centre, LA, USA.
Fenton, Steven, Wakefield, Jonathan P. and Fazenda, Bruno (2011) Objective Measurement of Music Quality Using Inter-Band Relationship Analysis. In: 130th Audio Engineering Society AES Convention, 13-16 May 2011, London, UK.
Fenton, Steven Michael (2017) Audio Dynamics - Towards a Perceptual Model of Punch. Doctoral thesis, University of Huddersfield.
Feradyan, Anthony and Holmes, Violeta (2013) Autonomous embedded fuzzy logic based wireless sensor network for indoor energy management. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 133-139. ISBN 9781862181212
Feradyan, Anthony and Holmes, Violeta (2012) Autonomous wireless sensor for building energy management with energy harvesting feasibility. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 145. ISBN 978-1-86218-106-9
Fieldhouse, John D. (2011) Experimental studies on the performance and emission of diesel engines fueled with waste cooking oil and its diesel blends. In: ICWEE 2011 : International Conference on Water, Energy and Environment, 21st -23rd December 2011, Phuket, Thailand. (Unpublished)
Fieldhouse, John D. and Ashraf, Naveed (2007) Observations of the disc/pad interface pressure distribution during variable braking conditions and its influence on brake noise. In: Proceedings of the XXVII. International µ Symposium 2007. VDI Reports Series . VDI Verlag GmbH. ISBN 9783183657124
Fieldhouse, John D., Ashraf, Naveed and Talbot, Chris J. (2009) An investigation of the movement of the disc / pad center of pressure during a braking event. In: 12th EAEC European Automotive Congress 2009, 29th June - 1st July 2009, Bratislava. (Unpublished)
Fieldhouse, John D., Ashraf, Naveed, Talbot, Chris J., Pasquet, T., Franck, P. and Gabriel, R. (2006) Measurement of the dynamic center of pressure of a brake pad during a braking operation. SAE Technical Papers.
Fieldhouse, John D., Bryant, David, Palmer, Edward and Mishra, Rakesh (2007) A study of the thermo-elastic effects of braking on high performance cars. In: 21st JUMV International Automotive Conference - Science and Motor Vehicles, 23-25th April 2007, Belgrade, Serbia.
Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2011) Hot Judder - An Investigation of the Thermo-Elastic and Thermo-Plastic Effects during Braking. In: SAE 2011 Noise and Vibration Conference and Exhibition Proceedings. SAE. ISBN 978-0-7680-6433-9
Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2011) The Influence of Pad Abutment on Brake Noise Generation. In: SAE 2011 Noise and Vibration Conference and Exhibition Proceedings. SAE. ISBN 978-0-7680-6433-9
Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2010) Investigation of brake squeal and the influence of the abutment faces. In: Proceedings of 6th European Conference on Braking, JEF 2010. European Conference on Braking . Groupement Regional Nord/Pas-de-Calais pour la Recherche dans les Transports, Universite de Lille 1, France, pp. 255-262.
Fieldhouse, John D., Bryant, David, Talbot, Chris J. and Layfield, Jonathan (2009) Thermo-elastic and elastic investigations of a brake disc during a heavy braking event. In: 12th EAEC European Automotive Congress 2009, 29th June 1st July 2009, Bratislava. (Unpublished)
Fieldhouse, John D., Steel, W.P and Talbot, Chris J. (2005) Measurement and comaprison of in-pane vibration of a twin and single caliper disc brake arrangement. In: Beograd 2005 EAEC European Automotive Congress, 30th May - 1st June 2005, Serbia and Montenegro. (Unpublished)
Fieldhouse, John D., Steel, William P. and Talbot, Chris J. (2006) Advances in Absolute Displacement Measurement of a Noisy Disc Brake. In: IMechE International Conference, Braking 2006, Advances in Vehicle Braking Technology. Professional Engineering Publishing, pp. 275-289. ISBN 085316245X
Fieldhouse, John D., Steel, William P., Talbot, Chris J. and Siddiqui, Mustakeem A. (2004) Rotor asymmetry used to reduce disc brake noise. SAE Technical Papers. ISSN 0148-7191
Fieldhouse, John D. and Talbot, Chris J. (2002) Investigation of drum brake noise from a brake mounted on a half vehicle test rig. In: 20th Annual Brake Colloquium And Exhibition, October 2002, Phoenix, AZ, USA.
Fischer, G., Bigerelle, M., Kubiak, K.J., Mathia, T.G., Khatir, Z. and Anselme, K. (2014) Wetting of anisotropic sinusoidal surfaces - experimental and numerical study of directional spreading. Surface Topography: Metrology and Properties, 2 (4). 044003. ISSN 2051-672X
Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2005) Investigation into the accuracy of a proposed laser diode based multilateration machine tool calibration system. Journal Paper of Physics: Conference Series, 13. pp. 398-401. ISSN 1742-6588
Fonyó, András, Kollar, László E., Farzaneh, Masoud and Montpellier, Patrice (2009) Experimental Simulation of Wet-Snow Shedding from Sagged Cables. In: 13th International Workshop on Atmospheric Icing of Structures, 8th - 11th September 2009, Andermatt, Switzerland.
Freegah, Basim (2016) Design, development and optimisation of a novel thermo-syphon system for domestic applications. Doctoral thesis, University of Huddersfield.
Freegah, Basim, Asim, Taimoor and Mishra, Rakesh (2013) Effects of condenser volume on the performance of a solar thermo-syphon. In: Annual Researchers' ConferenceComputing & Engineering 2013 (CEARC'13), December 2013, University of Huddersfield, Huddersfield, UK.
Frend, Ronald (2011) Determination of thermal insulation properties of buildings and structures’ external envelope using infrared thermal imaging. Masters thesis, University of Huddersfield.
Fricker, H., Taylor, Ruth and Gledhill, Duke (2012) Creation of the video game user interface. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9
Gadour, Aemad (2022) Flow Non-Uniformity(Φ) In Ducts with Single Inlet and Multiple Outlets. Masters thesis, University of Huddersfield.
Galindez-Najera, Silvia P, Choomjaihan, Prasan, Barron, Cecile, Lullien-Pellerin, Valerie and Campbell, Grant M. (2016) A compositional breakage equation for wheat milling. Journal of Food Engineering, 182. pp. 46-64. ISSN 0260-8774
Gao, F. and Jiang, Xiang (2017) Environmental robust interferometry for online/in-process surface inspection. In: The 2nd International Forum on Surface and Microscopy, 7-9 August 2017, Harbin, China. (Unpublished)
Gao, F., Tang, Dawei and Jiang, Xiang (2013) White Light Spectral Interferometry for Real Time Surface Profile Measurement. In: ASPEN 2013, 12-15, November 2013, Taipei, Taiwan. (Unpublished)
Garnaes, J., Kofod, N., Kuhle, A., Nielson, C., Dirscherl, K. and Blunt, Liam (2002) Calibration of step heights and roughness measurements with atomic force microscopes. Precision Engineering, 27 (1). pp. 91-98. ISSN 0141-6359
Gennish, R., Jiang, J, Albarbar, A., Harris, Georgina, Gu, Fengshou and Ball, Andrew (2006) Diesel Engine Combustion Monitoring Based on Acoustic Measurement of Exhaust Systems. In: ASME 8th Biennial Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Torino, Italy. (Unpublished)
Georgopoulou, Anneza, Angelis-Dimakis, Athanasios, Arampatzis, George and Assimacopoulos, Dionysis (2014) Eco-efficiency assessment in the agricultural sector: The case of fresh form tomato crop in Phthiotida. In: Proceedings of the 12th International Conference on Protection and Restoration of the Environment. GRAFIMA, Thessaloniki, Greece, pp. 935-941. ISBN 978-960-88490-6-8
Georgopoulou, Anneza, Angelis-Dimakis, Athanasios, Arampatzis, George and Assimacopoulos, Dionysis (2015) Improving the eco-efficiency of an agricultural water use system. Desalination and Water Treatment, 57 (25). pp. 11484-11493. ISSN 1944-3994
Gibson, M. L., Venters, Colin, Duboc, Leticia, Betz, Stefanie, Chitchyan, Ruzanna, Palacin Silva, V., Penzenstadler, Birgit and Seyff, Norbert (2017) Mind the chasm: A UK fisheye lens view of sustainable software engineering. In: 6th International Workshop on Requirements Engineering for Sustainable Systems (RE4SuSy), 4 September 2017, Lisbon, Portugal.
Gilkes, Oliver S. and Mishra, Rakesh (2006) Comparison of passive and active methods for improving transient performance of turbocharged engine systems. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.
Gilkes, Oliver S. and Mishra, Rakesh (2006) Computer simulation of air injection to the inlet manifold on turbocharged engines. In: FISITA World Student Congress, 2006, October 2006, Yokohama, Japan.
Gilkes, Oliver S., Mishra, Rakesh, Fieldhouse, John D. and Rao, H.V. (2008) Transient response of turbocharged diesel engine for transient operation using air injection assist system. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.
Gilkes, Oliver S., Mishra, Rakesh, Fieldhouse, John D. and Rao, Vasu (2009) Unsteady Interaction Of Turbocharger Compressor With IC Engine. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Gill, Harry and Unver, Ertu (2000) Innovation, design and CAE in new product development. In: Integrating design education beyond 2000: proceedings of the 22nd SEED Annual Design Conference and 7th National Conference on Product Design Education, 6-7 September 2000, University of Sussex, Brighton, UK. John Wiley and Sons Ltd, Brighton, UK. ISBN 9781860582653
Gledhill, Duke, Tian, G.Y., Liao, J. and Clarke, David (2004) Panoramic imaging based e-laboratory construction. In: Advances in E-Engineering and Digital Enterprise Technology: Proceedings of the 4th International Conference on E-Engineering and Digital Enterprise. Wiley, pp. 589-600. ISBN 9781860584671
Glover, Ian (1991) Meteor burst propagation. Electronics & Communication Engineering Journal, 3 (4). pp. 185-192. ISSN 0954-0695
Glover, Ian (1988) Modelling of spectral characteristics of hydrometeor scatter. In: IEE Colloquium on Radio Frequency Co-Channel Interference Measurements and Modelling at 1-30 GHz. IEEE, pp. 1-30.
Glover, Ian (2012) Radio Location of Partial Discharge for the Future Smart Grid. In: ICRCC, 21-22nd December 2012, Thiruvannamalai, India. (Unpublished)
Glover, Ian and Bhatti, S.A. (2012) Performance Evaluation of IEEE 802.15.4 Receiver in the Presence of Broadband Impulsive Noise. IEEE Standards Education e-magazine, 2 (3).
Glover, Ian and McEwan, N.J. (1990) Antenna Induced Clear Air Cross-polarisation On Terrestrial LOS Links. In: 10th Annual International Symposium on Geoscience and Remote Sensing. IEEE, pp. 85-86.
Gou, Yangchun (2015) The Study of the Dynamics of Diesel Engine Fuel Injectors with Alternative Fuels for Diagnosis. Masters thesis, University of Huddersfield.
Gray, Nicholas (2019) The Optimisiation of the Floating Ball Valve Seat Component Design Methodology. Masters thesis, University of Huddersfield.
Griffin, James Marcus and Chen, Xun (2009) Characteristics of the acoustic emission during horizontal single grit scratch tests: Part 1 characteristics and identification. International Journal of Abrasive Technology, 2 (1). pp. 25-42. ISSN 1752-2641
Griffin, James Marcus and Chen, Xun (2006) Classification of varying levels of ploughing, rubbing and cutting during Single Grit tests using Evolutionary Inspired Computer Techniques. In: 4th International Conference on Manufacturing Research (ICMR 2006), 5th-7th September 2006, Liverpool John Moores University, Liverpool. (Submitted)
Griffin, James Marcus and Chen, Xun (2009) Multiple classification of the acoustic emission signals extracted during burn and chatter anomalies using genetic programming. International Journal of Advanced Manufacturing Technology, 45 (11-12). pp. 1152-1168. ISSN 0268-3768
Groschl, Andreas, Akkasoglu, Gokhan, Loderer, Andreas, Plowucha, Wojciech, Werner, Teresa, Bills, Paul J. and Hausotte, Tino (2014) MUVOT - Establishing an International Vocational Training Program on the Topic of Measurement Uncertainty. In: 11th International Symposium on Measurement and Quality Control, 11-13 September 2013, Cracow-Kielce, Poland.
Gu, Fengshou, Jiang, J, Ball, Andrew, Gennish, R. and Liu, K (2006) An Experimental Study of Acoustic Impedance Measurement for Engine Condition Monitoring. In: Spring Conference Futures in Acoustics, 3-4 April 2006, Southampton, UK. (Unpublished)
Gu, Fengshou, Shao, Yimin, Naid, A. and Ball, Andrew (2011) Electrical motor current signal analysis using a modified bispectrum for fault diagnosis of downstream mechanical equipment. Mechanical Systems and Signal Processing, 25 (1). pp. 360-372. ISSN 0888-3270
Gubb, D., Holmes, Violeta, Kureshi, Ibad and James, Yvonne (2012) Implementing a Condor pool using a Green-IT policy. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 146. ISBN 978-1-86218-106-9
Guo, Jian, Ding, Lieyun, Luo, Hanbin, Zhou, Cheng and Ma, Ling (2014) Wavelet prediction method for ground deformation induced by tunneling. Tunnelling and Underground Space Technology, 41. pp. 137-151. ISSN 0886-7798
Guo, Li, Li, Bo and Chen, Xun (2007) Grinding temperature in high efficiency deep grinding of engineering ceramics. In: Proceedings of the 13th International Conference on Automation and Computing. Pacilantic International. ISBN 9780955529313
Haba, Usama, Feng, Guojin, Shaeboub, Abdulkarim, Peng, Xinyu, Gu, Fengshou and Ball, Andrew (2016) Detection and Diagnosis of Compound Faults in a Reciprocating Compressor based on Motor Current Signatures. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.
Haba, Usama, Shaeboub, Abdulkarim, Mones, Zainab, Gu, Fengshou and Ball, Andrew (2017) Diagnosis of Compound Faults in Reciprocating Compressors Based on Modulation Signal Bispectrum of Current Signals. In: IncoME-II 2017, 5-6 September 2017, The University of Manchester. (Unpublished)
Hagi, Ahmed (2016) A Simplified Transient CFD Model to Support the Development of a Low Cost Self-Monitoring Railway Damper. Masters thesis, University of Huddersfield.
Hamad, Naima (2019) THE ANALYSIS OF POWER SUPPLY SIGNALS BY INCLUDING PHASE EFFECTS FOR MACHINE FAULT DIAGNOSIS. Doctoral thesis, University of Huddersfield.
Hamad, Naima, Brethee, Khaldoon F., Gu, Fengshou and Ball, Andrew (2016) An Investigation of Electrical Motor Parameters in a Sensorless Variable Speed Drive for Machine Fault Diagnosis. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328
Hamed, M., Tesfa, Belachew, Aliwan, M., Li, G., Gu, Fengshou and Ball, Andrew (2013) The Influence of Vehicle Tyres Pressure on the Suspension System Response by Applying the Time-Frequency Approach. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. ICAC 2013 . Brunel University, London, UK. ISBN 978-1908549082
Hamed, M., Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2014) Effects of Tyre Pressure on Vehicle Suspension Performance. In: World Symposium on Mechanics Engineering & Applied Physics ( WSMAEP'14), 18th - 20th June 2014, Sousse, Tunisia. (Unpublished)
Hamed, M., Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2013) A study of the influence of vehicle tyre pressure on suspension system response using a full car model. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 7-12. ISBN 9781862181212
Hamed, Moamar (2016) Characterisation of the Dynamics of an Automotive Suspension System for On-line Condition Monitoring. Doctoral thesis, University of Huddersfield.
Hamomd, Osama, Alabied, Samir, Xu, Yuandong, Daraz, Alsadak, Gu, Fengshou and Ball, Andrew (2017) Vibration Based Centrifugal Pump Fault Diagnosis Based on Modulation Signal Bispectrum Analysis. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601
Hamomd, Osama, Ball, Andrew, Gu, Fengshou and Thobiani, F. (2013) Pump Rotor System Monitoring Based on Advanced Measurements and Analysis Techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 230. ISBN 9781862181212
Hamomd, Osama H. I. (2018) Compound Fault Diagnosis of Centrifugal Pumps Using Vibration Analysis Techniques. Doctoral thesis, University of Huddersfield.
Hanif, Imran, Hinks, J. A. and Donnelly, S. E. (2013) Transmission Electron Microscopy of Amorphisation and Recrystallisation of Silicon Nanowires under in situ Ion Irradiation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 231. ISBN 9781862181212
Haq, K. A. and Ward, Rupert (2012) Preliminary frameworks and models for telework maturity within organisations. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 104-109. ISBN 978-1-86218-106-9
Haq, K. A., Ward, Rupert and Wilkinson, Julie (2012) Preliminary frameworks and models for telework maturity within organisations. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 147. ISBN 978-1-86218-106-9
Harris, J.M. (2014) Exhibition at The International Surface Design Show London 2014. [Show/Exhibition]
Hart, A. J., Matthies, A, Bills, Paul J., Racasan, Radu, Blunn, G, Blunt, Liam and Skinner, J. (2013) The taper junction contributes one third of the total volumetric material loss in large diameter metal-on-metal hip arthroplasties. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 19-23 2013, Chicago, IL, USA. (Unpublished)
Hart, A. J., Matthies, A.K., Racasan, Radu, Bills, Paul J., Panagiotidou, A., Blunt, Liam, Blunn, G. and Skinner, J. (2012) Taper wear contributes only a third of the total volumetirc material loss in large head metal on metal hip replacement. In: British Orthopaedic Research Society Annual Meeting, September 24th-25th 2012, London, UK. (Unpublished)
Hasan, Abbas (2010) Multiphase Flow Rate Measurement Using a Novel Conductance Venturi Meter: Experimental and Theoretical Study In Different Flow Regimes. Doctoral thesis, University of Huddersfield.
Hasan, Abbas (2009) Multiphase Flow Rate Measurement Through A Conductance Venturi Meter. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Hasan, Abbas and Lucas, Gary (2011) Experimental and theoretical study of the gas–water two phase flow through a conductance multiphase Venturi meter in vertical annular (wet gas) flow. Nuclear Engineering and Design, 241 (6). pp. 1998-2005. ISSN 00295493
Hasan, Abbas and Lucas, Gary (2007) Modeling of a homogenous gas-water two phase flow through a Venturi and vertical pipe (A prediction of pressure drop sign change in two phase flow). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.
Hasan, Abbas and Lucas, Gary (2009) Modelling and Measurement of the Gas Flow Rate in Vertical Annular Gas-Water Flow Using a ‘Conductance Multiphase Venturi meter’. In: What, Where, When: Multi-dimensional Advances for Industrial Process Monitoring International Symposium, Tuesday 23 - Wednesday 24 June 2009, Leeds, UK. (Unpublished)
Hassan, Mothana A., Jiang, Xiang and Haydn, Martin (2012) Fast surface metrology using wavelength scanning and dispersive white light interferometry. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 148. ISBN 978-1-86218-106-9
Hassan, Mothana A., Jiang, Xiang and Martin, Haydn (2012) Comparison of the fringe visibility created by zero and first order diffracted beams in a dispersive interferometer. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 110-115. ISBN 978-1-86218-106-9
Hassan, Mothana A., Martin, Haydn and Jiang, Xiang (2013) Investigations on measurement speed of spatially dispersed short coherence interferometer. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 43-48. ISBN 9781862181212
Hassan, Rosilah, Irvine, James and Glover, Ian (2008) Design and Analysis of Virtual Bus Transport Using Synchronous Digital Hierarchy/Synchronous Optical Networking. Journal of Computer Science, 4 (12). pp. 1003-1011. ISSN 1549-3636
Hassin, Osama (2013) Different Signal Processing Techniques for Predicting the Condition of Journal Bearings. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 232. ISBN 9781862181212
Hassin, Osama, Yao, Aiying, Gu, Fengshou and Ball, Andrew (2016) Journal bearing condition monitoring based on the modulation signal bispectrum analysis of vibrations. In: Proceedings of the International Conference on Power Transmissions 2016 (ICPT 2016). Taylor & Francis, pp. 907-912. ISBN 9781138032675
Hassin, Osama, Yao, Aiying, Wei, Nasha, Gu, Fengshou and Ball, Andrew (2016) Monitoring Oil Levels Of Journal Bearings Based On The Analysis Of Vibration Signals. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.
Hassin, Osama A.A. (2017) Condition Monitoring of Journal Bearings for Predictive Maintenance Management Based on High Frequency Vibration Analysis. Doctoral thesis, University of Huddersfield.
Hatwesh, Ashraf, Fletcher, Simon and Longstaff, Andrew P. (2013) Precise Position Control of Machine Tool Feed Drives in the Presence of Load Perturbation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 146-151. ISBN 9781862181212
Hawksbee, Samuel, Smith, Colin and Gilbert, Matthew (2013) Application of discontinuity layout optimization to three-dimensional plasticity problems. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 469 (2155). p. 20130009. ISSN 1364-5021
Hayat, Ezri and Amaratunga, Dilanthi (2011) Road Reconstruction in Post – Disaster Recovery; Challenges and Obstacles. In: International Conference on Building Resilience: Interdisciplinary approaches to disaster risk reduction, and the development of sustainable communities and cities, 18-22 Jul 2011, Kandalama, Sri Lanka.
He, Xiaocong, Gu, Fengshou and Ball, Andrew (2013) Fatigue Behaviour of Fastening Joints of Sheet Materials and Finite Element Analysis. Advances in Mechanical Engineering, 2013. pp. 1-9. ISSN 1687-8132
He, Xiaocong, Gu, Fengshou and Ball, Andrew (2014) A review of numerical analysis of friction stir welding. Progress in Materials Science, 65. pp. 1-66. ISSN 0079-6425
He, Xiaocong, Zhao, Lun, Yang, Huiyan, Xing, Baoying, Wang, Yuqi, Deng, Chengjiang, Gu, Fengshou and Ball, Andrew (2014) Investigations of strength and energy absorption of clinched joints. Computational Materials Science, 94. pp. 58-65. ISSN 0927-0256
Hefny, Reham, Farzaneh, Masoud and Kollar, László E. (2012) Simulation of Snow Adhesion on Power Transmission Cables. In: International Conference on Mechanical Engineering and Mechatronics, 16th - 18th August 2012, Ottowa, Canada.
Hefny, Reham, Kollar, László E. and Farzaneh, Masoud (2012) Influence of Dynamic Forces on Wet Snow Shedding from Overhead Cables. In: International Conference on Mechanical Engineering and Mechatronics, 16th - 18th August 2012, Ottowa, Canada.
Hefny, Reham, Kollar, László E., Farzaneh, Masoud and Payrard, C. (2009) Adhesion of Wet Snow to Different Cable Surfaces. In: 13th International Workshop on Atmospheric Icing of Structures, 8th - 11th September 2009, Andermatt, Switzerland.
Holland, K.R., Newell, P.R., Castro, S.V. and Fazenda, Bruno (2006) Excess phase effects and modulation transfer function degradation in relation to loudspeakers and rooms intended for the quality control monitoring of music. Proceedings of the Institute of Acoustics, 27 (8). pp. 1-8.
Hu, Lei, Hu, Niaoqing, Qin, Guojun and Gu, Fengshou (2011) Turbopump Condition Monitoring Using Incremental Clustering and One-class Support Vector Machine. Chinese Journal of Mechanical Engineering, 24 (3). pp. 474-489. ISSN 1000-9345
Hu, Lei, Hu, Niaoqing, Zhang, Xinpeng, Gu, Fengshou and Gao, Ming (2013) Novelty detection methods for online health monitoring and post data analysis of turbopumps. Journal of Mechanical Science and Technology, 27 (7). pp. 1933-1942. ISSN 1976-3824
Hu, Lei, Hu, Niaoqing, Zhang, Xinpeng, Gu, Fengshou and Gao, Ming (2013) Novelty detection methods for online health monitoring and post data analysis of turbopumps. Journal of Mechanical Science and Technology, 27 (7). pp. 1933-1942. ISSN 1738-494X
Hu, Niaoqing, Xia, Lurui, Gu, Fengshou and Qin, Guojun (2011) A Novel Transform Demodulation Algorithm for Motor Incipient Fault Detection. IEEE Transactions on Instrumentation and Measurement, 60 (2). pp. 480-487. ISSN 0018-9456
Hudson, Scott, Stubbs, Chris and Weston, William (2012) The Effect on Emissions of using Alternative Fuels in Turbo-Charged Diesel Engines. In: International Conference on Renewable Energies and Power Quality (ICREPQ'12), 28th - 30th March 2012, Santiago de Compostela, Galicia.
Hughes, Braham C. and Wakefield, Jonathan P. (2012) User Interface Evaluation for Discrete Sound Placement in Film and TV Post-Production. In: 132nd Audio Engineering Society Convention, 26th - 29th April 2012, Budapest, Hungary.
Hussain, Shahnawaz and Chen, Xun (2008) Remote milling tool-wear monitoring and direct wear features extraction by image processing. International Journal of Internet Manufacturing and Services, 1 (3). pp. 246-261. ISSN 1751-6048
Hussein, Hawre (2020) Optimal Design of a Multi-Phase Pipeline. Doctoral thesis, University of Huddersfield.
Hussein, Mohammed, Hunt, Hugh, Kuo, Kirsty, Alves Costa, Pedro and de Oliveira Barbosa, Joao Manuel (2015) The use of sub-modelling technique to calculate vibration in buildings from underground railways. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 229 (3). pp. 303-314. ISSN 0954-4097
Ibrahim, Sidikat Modupe (2020) Performance Analysis of the Institutions in Charge of the Oil and Gas Industry Measurement Management and Development of Metrological Technology to Bridge the Knowledge and Skills Gaps In Nigeria. Doctoral thesis, University of Huddersfield.
Impes, Ahmed, Othman, Aisha, Wilson, David and Pislaru, Crinela (2014) Analysis of Communication Barriers in Technical Vocational Education System in Libya. In: Proceedings of International Conference on Communication, Media, Technology and Design. ICCMTD, Istanbul, Turkey, pp. 22-26.
Ipatova, I., Harrison, R.W., Wady, P.T., Shubeita, S.M., Terentyev, D., Donnelly, S. E. and Jimenez-Melero, E. (2017) Structural defect accumulation in tungsten and tungsten-5wt.% tantalum under incremental proton damage. Journal of Nuclear Materials. ISSN 0022-3115
Iqbal, Saqib (2009) Representing Aspects In Design Model. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Irvine, James and Glover, Ian (2009) Implementation of QoS onto Virtual Bus Network. European Journal of Scientific Research, 25 (1). pp. 25-34. ISSN 1450-216X
Iwnicki, S. (1999) The Manchester Benchmarks for Rail Vehicle Simulation. Vehicle System Dynamics, 31 . Taylor & Francis, London, UK. ISBN 978-90-2651-551-4
Iwnicki, S., Stichel, S., Orlova, A. and Hecht, M. (2015) Dynamics of railway freight vehicles. Vehicle System Dynamics. pp. 1-39. ISSN 0042-3114
Izod, Toby D. (2018) Electron multiplier supply and signal processing: working towards a system on chip solution. Masters thesis, University of Huddersfield.
Jaber, Adel, Lazaridis, Pavlos, Saeed, Bahghtar, Zhang, Yong, Khan, Umar, Upton, David, Mohamad, Hamd, Mather, Peter, Atkinson, Robert, Judd, Martin, Vieira, Maria Fatima Queiroz and Glover, Ian (2017) Assessment of Effective Radiated Power of the Partial Discharge Emulator Source. In: Wireless and Satellite Systems. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 186 (186). Springer, Cham, pp. 108-115. ISBN 978-3-319-53850-1
Jaber, Adel, Lazaridis, Pavlos, Saeed, Bakhtiar I., Zhang, Y, Khan, U., Upton, David, Mohamad, Hamd, Mather, Peter, Vieira, M F Q, Atkinson, R, Judd, M and Glover, Ian (2016) Comparative study of Partial Discharge emulators for the calibration of Free-Space radiometric measurements. In: 2016 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 978-1-86218-132-8
Jaber, Adel, Lazaridis, Pavlos, Saeed, Bakhtiar I., Zhang, Y, Khan, U., Upton, David, Mohamad, Hamd, Mather, Peter, Vieira, M F Q, Atkinson, R, Judd, M and Glover, Ian (2017) Validation of partial discharge emulator simulations using free-space radiometric measurements. In: 2016 International Conference for Students on Applied Engineering (ISCAE). IEEE. ISBN 978-1-4673-9053-8
Jaber, Adel Ali (2017) Absolute calibration of radiometric partial discharge sensors for insulation condition monitoring in electrical substations. Doctoral thesis, University of Huddersfield.
Jackson, Mark J., Khangar, A., Chen, Xun, Robinson, Grant M., Venkatesh, V.C. and Dahotre, N.B. (2007) Laser cleaning and dressing of vitrified grinding wheels. Journal of Materials Processing Technology, 185 (1-3). pp. 17-23. ISSN 0924-0136
Jackson, Mark J., Robinson, Grant M. and Chen, Xun (2007) Laser processing of high performance grinding wheels. International Journal of Manufacturing Technology and Management, 12 (1/2/3). pp. 3-24. ISSN 1368-2148
James, Yvonne, Holmes, Violeta, Kureshi, Ibad, Gubb, D. and Liang, Shuo (2012) Design of a new network infrastructure using RPC for the University of Huddersfield campus grid. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 149. ISBN 978-1-86218-106-9
Jamil, M. M. Abdul, Sefat, F., Khaghani, S. A., Batista Lobo, S., Javid, Farideh A., Youseffi, M., Britland, S. T., Liu, S. G., See, C. W., Somekh, M. G and Denyer, M. (2008) Cell imaging with the widefield surface plasmon microscope. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008. IFMBE Proceedings, 21 (21). Springer, Berlin, pp. 528-531. ISBN 1680-0737
Jamshidi, Parastoo, Ma, Paul, Khosrowyar, Katahyunne, Smith, Alan M. and Grover, Liam M. (2012) Tailoring gel modulus using dispersed nanocrystalline hydroxyapatite. Journal of Experimental Nanoscience, 7 (6). pp. 652-661. ISSN 1745–8080
Jeffries, Karl, Unver, Ertu and Jagger, B (2002) Assessing Creativity: Theory and Practice, Sharing Experience in Engineering Design. In: Sharing Experience in Engineering Design: SEED 2002. Wiley, Chichester, pp. 99-122. ISBN 978-1-86058-397-1
Jiang, Xiang (2007) Foreword. In: Theory and Methodology of GPS. Cheung Kong Scholars Series . Higher Education Press, Beijing. ISBN 978-7-04-022489-4
Jiang, Xiang (2012) Precision surface measurement. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 4089-4114. ISSN 1364-503X
Jiang, Xiang (2009) The evolution of surfaces and their measurement. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia. (Unpublished)
Jiang, Xiang and Blunt, Liam (2001) Morphological assessment of orthopaedic implants using multiscalar wavelets. Wear, 250. pp. 217-221. ISSN 0043-1648
Jiang, Xiang and Blunt, Liam (2004) Third generation wavelet for the extraction of morphological features from micro and nano scalar surfaces. Wear, 257. pp. 1235-1240. ISSN 0043-1648
Jiang, Xiang, Blunt, Liam and Scott, Paul J. (2002) Fundamental research into the filtration of surface texture in geometric product specification and verification. In: 3rd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering - ICME 2002, 3rd-5th July 2002, Ischia, Italy. (Unpublished)
Jiang, Xiang, Blunt, Liam and Stout, K.J. (2001) Application of the lifting wavelet to rough surfaces. Precision Engineering, 25 (2). pp. 83-89. ISSN 0141-6359
Jiang, Xiang, Gu, Fengshou and Ball, Andrew (2008) Automotive Diesel Engine Performance and Condition Monitoring using Downpipe Acoustic Waveform Analysis. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.
Jiang, Xiang and Mahadevan, S. (2006) Bayesian cross-entropy methodology for optimal design of validation experiments. Measurement Science and Technology, 17. pp. 1895-1908. ISSN 0957-0233
Jiang, Xiang and Scott, Paul J. (2003) Review of surface texture work in ISO. In: 9th International Conference on Metrology and Properties of Engineering Surfaces, 10th-11th September 2003, Halmstad University, Sweden. (Unpublished)
Jiang, Xiang, Scott, Paul J. and Whitehouse, D.J. (2007) Freeform surface characterisation - a fresh strategy. CIRP Annals - 2007, 56 (1). pp. 553-556. ISSN 1726-0604
Jiang, Xiang, Scott, Paul J. and Whitehouse, D.J. (2008) Wavelets and their applications for surface metrology. CIRP Annals - Manufacturing Technology, 57 (1). pp. 555-558. ISSN 0007-8506
Jiang, Xiang, Scott, Paul J., Whitehouse, D.J. and Blunt, Liam (2007) Paradigm shifts in surface metrology. Part I. Historical philosophy. Proceedings of The Royal Society A Mathematical Physical and Engineering Sciences, 463 (2085). pp. 2049-2070. ISSN 1364-5021
Jiang, Xiang, Scott, Paul J., Whitehouse, D.J. and Blunt, Liam (2007) Paradigm shifts in surface metrology. Part II. The current shift. Proceedings of the Royal Society, A, 463 (2085). pp. 2071-2099. ISSN 1364-5021
Jiang, Xiang, Shore, Paul, McKeown, Pat, Whitehouse, David J. and Ruffles, Philip Charles (2012) Introduction: Ultra-precision engineering: from physics to manufacturing. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 3831-3834. ISSN 1364-503X
Jiang, Xiang, Shore, Paul, McKeown, Pat, Whitehouse, David J. and Ruffles, Philip Charles (2012) Preface: Discussion Meeting Issue. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 3829-3830. ISSN 1364-503X
Jiang, Xiang, Wang, Kaiwei, Martin, Haydn and Yang, Shuming (2007) Surface characteristic determining apparatus. WO2007144654.
Jiang, Xiang and Whitehouse, D.J. (2005) 7th International Symposium on Measurement Technology and Intelligent Instruments. Journal of Physics, Confer. ISSN 1742-6596
Jiang, Xiang and Whitehouse, David J. (2012) Precision metrology. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 4154-4160. ISSN 1364-503X
Jiang, Xiang and Whitehouse, David J. (2012) Technological shifts in surface metrology. CIRP Annals - Manufacturing Technology, 61 (2). pp. 815-836. ISSN 0007-8506
Jiang, Xiang, Zeng, Wenhan, Scott, Paul J. and Ma, J.W. (2008) Linear feature extraction based on complex ridgelet transform. Wear, 264 (5-6). pp. 428-433. ISSN 0043-1648
Jiang, Xiang, Zeng, Wenhan, Smith, I., Scott, Paul J. and Maletras, F. (2007) The detection of transient behaviour in environmental vibration for the Watt balance. Measurement Science and Technology, 18 (5). pp. 1487-1494. ISSN 0957-0233
Jilani, Rabia (2017) Learning Static Knowledge for AI Planning Domain Models via Plan Traces. Doctoral thesis, University of Huddersfield.
Jilani, Rabia and Kitchin, Diane E. (2013) A Brief Review of Automated Knowledge Engineering Tools for Artificial Intelligence Planning & Scheduling. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 152-158. ISBN 9781862181212
Jimoh, F. and Holmes, Violeta (2012) Design of a wireless patient diagnosis system. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 69-74. ISBN 978-1-86218-106-9
Jimoh, F. and McCluskey, T.L. (2012) Using automated planning to enable autonomic properties in computer systems. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 150. ISBN 978-1-86218-106-9
Jimoh, Falilat, Chrpa, Lukas, McCluskey, T.L. and Shah, Mohammad Munshi Shahin (2013) Towards Application of Automated Planning in Urban Traffic Control. In: 2013 16th International IEEE Conference on Intelligent Transportation Systems (ITSC 2013). Institute of Electrical and Electronics Engineers ( IEEE ), pp. 985-990. ISBN 9781479929139
Jimoh, Falilat, Chrpa, Lukáš and Vallati, Mauro (2013) Autonomic System Architecture: An Automated Planning Perspective. In: Artificial Intelligence Applications and Innovations 2013. IFIP Advances in Information and Communication Technology, 412 (121). Springer, Pahpos, Cyprus, pp. 121-130. ISBN 9783642411410
Jimoh, Falilat and McCluskey, T.L. (2016) Self-Management in Urban Traffic Control – an Automated Planning Perspective. In: Autonomic Transport Support Systems. Springer. ISBN 9783319258089
Jimoh, Falilat, McCluskey, T.L. and Simon, Parkinson (2017) A Hybrid Approach to Process Planning: The Urban Traffic Controller Example. Journal of Computer Science, 13 (8). pp. 257-274. ISSN 1549-3636
Johnson, Anthony (2014) Sustainability - its incorporation into the mechanical engineering design process. Doctoral thesis, University of Huddersfield.
Johnson, Anthony and Mishra, Rakesh (2013) Sustainability principles and their integration into a higher education mechanical engineering undergraduate programme. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 218-223. ISBN 9781862181212
Kalsaas, Bo Terje, Koskela, Lauri, Saurin, Tarcisio Abreu and Drevland, Frode (2014) Proceedings of the 22nd Annual Conference of the International Group for Lean Construction. IGLC 2014, 1,2,3 . IGLC & Akademika forlag, Oslo, Norway. ISBN 978-82-321-0461-1
Kapadia, Darshil (2018) Method for Characterising and Quantifying Volumetric Edge-Wear in Ceramic-On-Ceramic Hip Arthroplasty Devices. Doctoral thesis, University of Huddersfield.
Karev, Anatolij R., Farzaneh, Masoud and Kollar, László E. (2007) Measuring temperature of the ice surface during its formation by using infrared instrumentation. International Journal of Heat and Mass Transfer, 50 (3-4). pp. 566-579. ISSN 0017-9310
Kausel, Eduardo, Malischewsky, Peter and de Oliveira Barbosa, Joao Manuel (2015) Osculations of spectral lines in a layered medium. Wave Motion, 56. pp. 22-42. ISSN 0165-2125
Kausel, Eduardo and de Oliveira Barbosa, Joao Manuel (2012) PMLs: A direct approach. International Journal for Numerical Methods in Engineering, 90 (3). pp. 343-353. ISSN 1097-0207
Kenan, T. and Pislaru, Crinela (2012) Challenges related to e-learning implementation in higher education institutions in Libya. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 151. ISBN 978-1-86218-106-9
Kenan, T. and Pislaru, Crinela (2012) Challenges related to the implementation of e-learning in higher education institutions in Libya. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 116-122. ISBN 978-1-86218-106-9
Kenan, Thuraya (2015) Improving the Effectiveness of E-Learning Implementation in the School of Engineering at Tripoli University. Doctoral thesis, University of Huddersfield.
Kenan, Thuraya, Pislaru, Crinela, Othman, Aisha and Elzawi, A. (2013) The social impact and cultural issues affecting the e-learning performance in Libyan Higher Education institutes. International Journal of Information Technology & Computer Science, 12 (1). pp. 50-56. ISSN 2091-1610
Kendall, S.C., Crampton, Andrew and Mason, John C. (2003) Shape preserving approximation with large sets of scattered data. In: Curve and Surface Fitting: Saint-Malo 2002. Nashboro Press, Brentwood, pp. 89-96. ISBN 0-9728482-1-5
Khin, Zu Thane Mwae (2020) Investigation into the use of High Temperature Impact Resistant Polymers for Turbocharger Compressor Covers. Masters thesis, University of Huddersfield.
Khodabakhshi, G., Walker, D., Scutt, A., Way, L., Cowie, R.M. and Hose, D.R. (2013) Measuring three-dimensional strain distribution in tendon. Journal of Microscopy, 249 (3). pp. 195-205. ISSN 00222720
King, Stephen, Tian, G.Y. and Ward, Stephen (2004) A face-based computer login system. In: Advances in E-Engineering and Digital Enterprise Technology: Proceedings of the 4th International Conference on E-Engineering and Digital Enterprise. Wiley, pp. 532-534. ISBN 978-1-86058-467-1
Kirchbach, Kim, Aziz, Zeeshan and Tezel, Algan (2015) Earthworks Control Automation. Project Report. University of Salford, UK.
Kollar, László E. and Farzaneh, Masoud (2006) Dynamic Behavior of Cable Systems with Spacers Following Ice Shedding. In: ICNPAA-2006: Mathematical Problems in Engineering and Aerospace Sciences, 21st - 23rd June 2006, Budapest, Hungary. (Unpublished)
Kollar, László E. and Farzaneh, Masoud (2012) Influence of transmission line parameters on high-amplitude vibration of conductor bundles. In: 10th world congress on computational mechanics, 8-13th July 2012, Sao Paulo, Brazil. (Unpublished)
Kollar, László E. and Farzaneh, Masoud (2012) Modeling Sudden Ice Shedding from Conductor Bundles. IEEE Transactions on Power Delivery, 28 (2). pp. 604-611. ISSN 0885-8977
Kollar, László E. and Farzaneh, Masoud (2011) Modeling and Experimental Study of Variation of Droplet Cloud Characteristics in a Low-Speed Horizontal Icing Wind Tunnel. In: Wind Tunnels: Aerodynamics, Models and Experiments. Engineering Tools, Techniques and Tables . Nova Publishers, pp. 93-128. ISBN 978-1-61209-204-1
Kollar, László E. and Farzaneh, Masoud (2009) Modeling the dynamic effects of ice shedding on spacer dampers. Cold Regions Science and Technology, 57 (2-3). pp. 91-98. ISSN 0165-232X
Kollar, László E. and Farzaneh, Masoud (2007) Modeling the evolution of droplet size distribution in two-phase flows. International Journal of Multiphase Flow, 33 (11). pp. 1255-1270. ISSN 0301-9322
Kollar, László E. and Farzaneh, Masoud (2009) Spray characteristics of artificial aerosol clouds in a low-speed icing wind tunnel. Atomization and Sprays, 19 (4). pp. 387-405. ISSN 1046-5111
Kollar, László E. and Farzaneh, Masoud (2008) Vibration of Bundled Conductors Following Ice Shedding. IEEE Transactions on Power Delivery, 23 (2). pp. 1097-1104. ISSN 0885-8977
Kollar, László E. and Farzaneh, Masoud (2010) Wind-tunnel investigation of icing of an inclined cylinder. International Journal of Heat and Mass Transfer, 53 (5-6). pp. 849-861. ISSN 0017-9310
Kollar, László E., Farzaneh, Masoud and Karev, Anatolij R. (2005) Modeling droplet collision and coalescence in an icing wind tunnel and the influence of these processes on droplet size distribution. International Journal of Multiphase Flow, 31 (1). pp. 69-92. ISSN 0301-9322
Kollar, László E., Farzaneh, Masoud and Karev, Anatolij R. (2006) Modeling droplet size distribution near a nozzle outlet in an icing wind tunnel. Atomization and Sprays, 16 (6). pp. 673-686. ISSN 1045-5110
Kollar, László E., Farzaneh, Masoud and Van Dyke, Pierre (2013) Modeling Ice Shedding Propagation on Transmission Lines with or without Interphase Spacers. IEEE Transactions on Power Delivery, 28 (1). pp. 261-267. ISSN 0885-8977
Kollar, László E., Lucas, Gary and Meng, Yiqing (2015) Reconstruction of velocity profiles in axisymmetric and asymmetric flows using an electromagnetic flow meter. Measurement Science and Technology, 26 (5). ISSN 0957-0233
Kollar, László E., Lucas, Gary and Zhang, Zhichao (2013) An Analytical Method for Reconstruction of Velocity Profiles using a Multi-Electrode Electromagnetic Flow Meter. In: 7th World Congress on Industrial Process Tomography. WCIPT7 . International Society for Industrial Process Tomography, Krakow, Poland, pp. 385-394. ISBN 978 0 853 16323 7
Kollar, László E., Lucas, Gary and Zhang, Zhichao (2014) Proposed method for reconstructing velocity profiles using a multi-electrode electromagnetic flow meter. Measurement Science and Technology, 25 (7). 075301. ISSN 0957-0233
Kollar, László E., Olqma, Ossama and Farzaneh, Masoud (2010) Natural wet-snow shedding from overhead cables. Cold Regions Science and Technology, 60 (1). pp. 40-50. ISSN 0165-232X
Kollar, László E., Somlo, J. and Stepan, G. (2000) Szabályozott egyensúlyozási rendszer periodikus megoldásai [Periodic Responses of a Controlled Balancing System]. Gépgyártástechnológia, (10). ISSN 0016-8580
Kollar, László E., Stepan, G. and Turi, J. (2004) Dynamics of piecewise linear discontinuous maps. International Journal of Bifurcation and Chaos, 14 (07). pp. 2341-2351. ISSN 0218-1274
Kollar, László E., Stepan, Gabor and Hogan, S.J. (2000) Backlash in balancing systems using approximate spring characteristics. In: 3rd European Nonlinear Oscillations Conference, 8-12 August 1999, Lyngby, Denmark.
Kollar, László E., Stepan, Gabor and Hogan, S.J. (2000) Sampling Delay and Backlash in Balancing Systems. Periodica Polytechnica Mechanical Engineering, 44 (1). pp. 77-84. ISSN 0324-6051
Koskela, Lauri (1997) Re-Engineering, concurrent engineering, lean production: What is the ideal antidote for the construction industry's ailments? In: International Conference on Construction Process Re-engineering, 14-15th July 1997, Gold Coast, Australia. (Unpublished)
Koskela, Lauri (1987) The role of knowledge engineering in information management on the construction site. In: Fourth International Symposium on Automation and Robotics in Construction, 1987, Haifa, Israel. (Unpublished)
Koskela, Lauri, Howell, Greg, Pikas, Ergo and Dave, Bhargav (2014) If CPM is so bad, why have we been using it so long? In: The 22th International Group for Lean Construction conference, June 23-27, 2014, Oslo, Norway.
Koskela, Lauri, Pikas, Ergo, Niiranen, Jarkko, Ferrantelli, Andrea and Dave, Bhargav (2017) On Epistemology of Construction Engineering and Management. In: 25th Annual Conference of the International Group for Lean Construction, 9th-12th July 2017, Heraklion, Greece.
Koskela, Lauri, Rooke, John and Siriwardena, Mohan (2016) Evaluation of the Promotion of Through-Life Management in Public Private Partnerships for Infrastructure. Sustainability, 8 (6). p. 552. ISSN 2071-1050
Kostovasilis, Dimitrios, Koroma, S.G., Hussein, M.F.M. and Owen, J.S. (2013) A comparison between the use of straight and curved beam elements for modelling curved railway tracks. In: 11th Biennial International Conference on Vibration Problems (ICOVP-2013), 9th - 12th September 2013, Lisbon, Portugal.
Kostovasilis, Dimitrios, Koroma, S.G., Hussein, M.F.M. and Owen, J.S. (2013) The effect of curvature on the dynamic behaviour of a railway track. In: ACOUSTICS 2013: Annual Spring Conference. Proceedings of the Institute of Acoustics, 35 (35, 1). Institute of Acoustics, pp. 170-175. ISBN 978-1-62748-405-3
Kostovasilis, Dimitrios, Ntotsios, E., Hussein, M.F.M., Thompson, D.J. and Squicciarini, G. (2014) A holistic approach for the design and assessment of railway tracks. In: IX International Conference on Structural Dynamics (EURODYN 2014),, 30th June - 2nd July 2014, Porto, Portugal.
Kostovasilis, Dimitrios, Thompson, D.J. and Hussein, M.F.M. (2015) The effect of vertical-lateral coupling of rails including initial curvature. In: 22nd International Congress on Sound and Vibration (ICSV22), 12th - 16th July 2015, Florence, Italy.
Kovacicinova, Jana, Zhang, Peng, Li, Jie, Yu, Guoyu and Walker, David D. (2016) Development of swinging part profilometer for optics. Proceedings of SPIE, 10151. 101510B. ISSN 0277-786X
Kroll, Ehud and Koskela, Lauri (2016) Applying the proto-theory of design to explain and modify the parameter analysis method of conceptual design. International Journal of Design Creativity and Innovation, 4 (1). pp. 1-25. ISSN 2165-0349
Kroll, Ehud and Koskela, Lauri (2016) Explicating concepts in reasoning from function to form by two-step innovative abductions. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 30 (02). pp. 125-137. ISSN 0890-0604
Kulyakhtin, Anton, Kollar, László E., Løset, Sveinung and Farzaneh, Masoud (2012) Numerical Simulations of 3D Spray Flow in a Wind Tunnel with Application of O’Rourke’s Interaction Algorithm and Its Validation. In: 21st International Symposium on Ice, 11th - 15th June 2012, Dalian, China.
Kulyakhtin, Anton, Løset, Sveinung and Kollar, László E. (2012) Small-Scale Simulation of Seawater Icing in Natural Field Conditions. In: 21st International Symposium on Ice, 11th - 15th June 2012, Dalian, China.
Kumar, P., Martin, H. and Jiang, X. (2016) Towards the development of a hybrid-integrated chip interferometer for online surface profile measurements. Review of Scientific Instruments, 87 (6). ISSN 0034-6748
Kumar, Prashant, Martin, Haydn, Maxwell, G and Jiang, Xiang (2014) Hybrid photonic chip interferometer for embedded metrology. In: Proceedings of SPIE: Integrated Optics: Devices, Materials, and Technologies XVIII. SPIE, California, USA, 89880N.
Kumar, Prashant, Martin, Haydn, Maxwell, G. and Jiang, Xiang (2013) Design of a dispersive lateral scanning surface profilometer. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 159-164. ISBN 9781862181212
Kumar, Prashant, Martin, Haydn, Maxwell, Graeme and Jiang, Xiang (2012) Design and Development of a Self Calibrated Optical Chip Interferometer for High Precision On-line Surface Measurement. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 14-19. ISBN 978-1-86218-106-9
Kumar, Prashant, Martin, Haydn, Maxwell, Graeme and Jiang, Xiang (2012) Design and development of a self calibrated optical chip interferometer for high precision on-line surface measurement. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 152. ISBN 978-1-86218-106-9
Kumar, U., Mishra, Rakesh, Singh, S.N. and Seshadri, V. (2003) Effect of particle gradation on flow characteristics of ash disposal pipelines. Powder Technology, 132 (1). pp. 39-51. ISSN 0032-5910
Kureshi, Ibad, Holmes, Violeta, Cooke, D., Allan, R., Liang, Shuo and Gubb, D. (2012) Robust mouldable intelligent scheduling using application benchmarking for elastic environments. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 156. ISBN 978-1-86218-106-9
Kureshi, Ibad, Holmes, Violeta, Gubb, D., Liang, Shuo, Bonner, Stephen and Cooke, D. (2012) Providing laaS using a private cloud in an HE environment. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 155. ISBN 978-1-86218-106-9
Kureshi, Ibad, Holmes, Violeta and Liang, Shuo (2010) Hybrid HPC – Establishing a Bi-Stable Dual Boot Cluster for Linux with OSCAR middleware and Windows HPC 2008 R2. In: UK eScience All-Hands Meeting, 13-16 September 2010, Cardiff, Wales. (Unpublished)
Kureshi, Ibad, Holmes, Violeta, Liang, Shuo and Cooke, D. (2012) Optimising multi-user and multi-application HPC system utilisation using effective queue management. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 154. ISBN 978-1-86218-106-9
Kureshi, Ibad, Holmes, Violeta, Liang, Shuo, Gubb, D. and Cooke, D. (2012) High performance distributed computing resources to enable e-science research. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 153. ISBN 978-1-86218-106-9
Kwong, K.H., Wu, T.T., Goh, H.G., Sasloglou, K., Stephen, B., Glover, Ian, Shen, C., Du, W., Michie, C. and Andonovic, I. (2011) Implementation of herd management systems with wireless sensor networks. IET Wireless Sensor Systems, 1 (2). pp. 55-65. ISSN 2043-6386
Kwong, K.H., Wu, T.T., Goh, H.G., Sasloglou, K., Stephen, B., Glover, Ian, Shen, C., Du, W., Michie, C. and Andonovic, I. (2009) Implementation of herd management systems with wireless sensor networks. In: Joint International Agricultural Conference, 6-8th July 2009, Wageningen, Netherlands. (Unpublished)
Kwong, Kae Hsiang, Sasloglou, Konstantinos, Goh, Hock Guan, Wu, Tsung Ta, Stephen, Bruce, Gilroy, Michael, Tachtatzis, Christos, Glover, Ian, Michie, Craig and Andonovic, Ivan (2009) Adaptation of wireless sensor network for farming industries. In: 2009 Sixth International Conference on Networked Sensing Systems (INSS). IEEE, pp. 1-4. ISBN 9781424463138
Kwong, Kae Hsiang, Wu, Tsung-Ta, Goh, Hock Guan, Sasloglou, Konstantinos, Stephen, Bruce, Glover, Ian, Shen, Chong, Du, Wencai, Michie, Craig and Andonovic, Ivan (2012) Practical considerations for wireless sensor networks in cattle monitoring applications. Computers and Electronics in Agriculture, 81. pp. 33-44. ISSN 0168-1699
Lan, Xiangqi, Blunt, Liam and Xiao, Shaojun (2010) Building a Flexible Surface Characterisation System Architecture. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 43-47. ISBN 9781862180932
Lan, Xiangqi, Jiang, Xiang, Blunt, Liam, Xiao, Shaojun and Xie, Fang (2009) Characterisation Platform For Surface Metrology. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Lane, Mark (2021) THE USE OF EFFICIENCY INDICATORS FOR THE DETECTION OF COMBINED MOTOR ASYMMETRY FAULTS AND THEIR EFFECTIVENESS WHEN USED ON INVERTER DRIVEN MOTOR SYSTEMS. Doctoral thesis, University of Huddersfield.
Lane, Mark (2011) Using the AC Drive Motor as a Transducer for Detecting Electrical and Electromechanical Faults. Masters thesis, University of Huddersfield.
Lane, Mark, Shaeboub, Abdulkarim, Gu, Fengshou and Ball, Andrew (2017) Investigation of Reductions in Motor Efficiency and Power caused by Stator Faults when operated from an Inverter Drive under Open Loop and Sensorless Vector Modes. Systems Science & Control Engineering, 5 (1). pp. 361-379. ISSN 2164-2583
Lane, Mark, Shaeboub, Abdulkarim, Gu, Fengshou and Ball, Andrew (2016) Investigation of Reductions in Motor Efficiency caused by Stator Faults when operated from an Inverter Drive. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328
Leach, Richard K., Chetwynd, D., Blunt, Liam, Haycocks, J., Harris, Peter M., Jackson, K., Oldfield, S. and Reilly, S. (2006) Recent advances in traceable nanoscale dimension and force metrology in the UK. Measurement Science and Technology, 17. pp. 467-476. ISSN 0957-0233
Lee, Hyunkook (2015) 2D to 3D ambience upmixing based on perceptual band allocation. Journal of the Audio Engineering Society, 63 (10). pp. 811-821. ISSN 1549-4950
Lee, J.H., Walker, D.D. and Doel, A.P. (2000) An Adaptive Secondary Mirror demonstrator: Construction and Preliminary Evaluation. Optical Engineering, 39. pp. 1057-1062. ISSN 0091-3286
Lee, Samuel P. (2018) MIXED FLOW TURBINE HOUSING DEVELOPMENT FOR A FIXED GEOMETRY TURBOCHARGER APPLICATION. Doctoral thesis, University of Huddersfield.
Leeungculsatien, Teerachai and Lucas, Gary (2012) Measurement of velocity profiles in multiphase flow using a multi-electrode electromagnetic flow meter. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 31-37. ISBN 978-1-86218-106-9
Leeungculsatien, Teerachai and Lucas, Gary (2013) Measurement of velocity profiles in multiphase flow using a multi-electrode electromagnetic flow meter. Flow Measurement and Instrumentation, 31. pp. 86-95. ISSN 0955-5986
Lei, Dongdong, Crampton, Andrew, Mason, John C. and Ross, C. (2003) An efficient algorithm for solving linearized SVM regression problems. In: Curve and Surface Fitting: Saint-Malo 2002. Nashboro Press, Brentwood, pp. 249-258. ISBN 0-9728482-1-5
Lei, Fei, Xu, Qiang and Zhang, Guangde (2017) Machinery, Materials Science and Engineering Applications: Proceedings of the 6th International Conference on Machinery, Materials Science and Engineering Applications (MMSE 2016). CRC Press. ISBN 9781138029576
Li, Andol X and Bonner, John V.H. (2010) Improving prototype consistence for wizard-of-oz simulations and evaluations. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 136-141. ISBN 9781862180932
Li, Duo (2018) DEVELOPMENT AND APPLICATION OF ON-MACHINE SURFACE MEASUREMENT FOR ULTRA-PRECISION TURNING PROCESS. Doctoral thesis, University of Huddersfield.
Li, Duo, Ding, Fei, Jiang, Xiangqian, Blunt, Liam A. and Tong, Zhen (2017) Calibration of an interferometric surface measurement system on an ultra-precision turning lathe. In: Lamdamap 12th International Conference & Exhibition, 15-16th March 2017, Renishaw Innovation Centre, UK.
Li, Duo, Jiang, Xiangqian, Blunt, Liam, Tong, Zhen, Williamson, James and Young, Christian (2017) Development of on-machine measurement for ultra-precision machining. In: euspen's 17th International Conference, 29 May - 2 June 2017, Hannover, Germany. (Unpublished)
Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2012) Integrated Tactile and Optical Measuring Systems in Three Dimensional Metrology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 1-6. ISBN 978-1-86218-106-9
Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) A Practical Coordinate Unification Method for Integrated Tactile-Optical Measuring System. Optics and lasers in engineering. ISSN 0143-8166
Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2014) Rapid and accurate reverse engineering of geometry based on a multi-sensor system. International Journal of Advanced Manufacturing Technology, 74 (1-4). pp. 369-382. ISSN 0268-3768
Li, Guoxing (2016) Investigation into the dynamic responses and tribological characteristics of cylinder liners in a IC engine with alternative fuels. Doctoral thesis, University of Huddersfield.
Li, Guoxing, Gu, Fengshou, Wang, Tie and Ball, Andrew (2013) The Potential Effects of Alternative Fuels on the Lubricating Condition of Compression-ignition Engines. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 233. ISBN 9781862181212
Li, Guoxing, Gu, Fengshou, Wang, Tie, Yang, Tiantian and Ball, Andrew (2017) Investigation into the dynamic response of cylinder liners in an IC engine based on a validated finite-element model. Systems Science & Control Engineering, 5 (1). pp. 56-69. ISSN 2164-2583
Li, Guoxing, Gu, Fengshou, Wang, Tie, Zhang, Ruiliang and Ball, Andrew (2017) A Dynamic Deformation based Lubrication Model between the Piston Rings and Cylinder Liner. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601
Li, Guoxing, Gu, Fengshou, Wei, Nasha, Xu, Yuandong and Ball, Andrew (2016) A validated finite element model for predicting dynamic responses of cylinder liners in an IC engine*. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328
Li, H., Jiang, Xiang and Li, Z. (2005) Combination of M-estimation and Gaussian filtering for characterizing 3D Engineering surfaces. Key Engineering Materials, 295-29. pp. 459-464. ISSN 1013-9826
Li, Haiyang (2021) Condition Monitoring and Fault Diagnosis of Induction Machine Rotor Systems based on Instantaneous Electrical Signals Analysis. Doctoral thesis, University of Huddersfield.
Li, Huifen, Jiang, Xiang and Li, Zhu (2004) Robust estimation in Gaussian filtering for engineering surface characterization. Precision Engineering, 28 (2). pp. 186-193. ISSN 0141-6359
Li, Long, Wang, Guangbin, Deng, Wenhui, Tang, Xiaoli, Gu, Fengshou and Ball, Andrew (2017) The Identification of Shaft Current Induced Defects on Rolling Bearings in Wind Turbine Generators. Proceedings of the 23rd International Conference on Automation & Computing (University of Huddersfield, 7-8 September 2017).
Li, Miaoshuo (2022) A Pixel Array Framework of Vision-based Remote Vibration Measurements for Modal Analysis and Condition Monitoring. Doctoral thesis, University of Huddersfield.
Li, Rui F., Liu, Lande, Wang, Xue Z., Tweedie, Richard J., Primrose, Ken, Corbett, Jason and McNeil-Watson, Fraser K. (2009) Multivariate Statistical Control of Emulsion and Nanoparticle Slurry Processes Based on Process Tomography, Dynamic Light Scattering, and Acoustic Sensor Data. Computer Aided Chemical Engineering, 27. pp. 1317-1322. ISSN 1570-7946
Li, T., Blunt, Liam and Jiang, Xiang (2009) Uncertainty In Surface Roughness Measurement. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Li, T., Blunt, Liam, Jiang, Xiang, Scott, Paul J. and Xiao, X. (2007) On the accuracy of roughness parameters. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.
Li, T., Jiang, Xiang, Blunt, Liam, Scott, Paul J. and Xiao, Shaojun (2007) Comparison on F2 softgauges for surface texture. In: 1st European Conference on Tribology (ECOTRIB), June 12-15, 2007, Ljubljana, Slovenia.
Li, T., Jiang, Xiang, Blunt, Liam, Scott, Paul J. and Xiao, Shaojun (2008) The Design and Use of F1 Softgauges for Validating Surface Metrology Software. Key Engineering Materials, 381-38. pp. 643-646. ISSN 1013-9826
Li, T., Jiang, Xiang, Blunt, Liam, Scott, Paul J. and Yao, Shaowen (2007) The Design and Use of F1 Softgauges for Validating Surface Metrology Software. In: The 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2007), 24-27 September 2007, Tohoku University, Sendai, Japan. (Unpublished)
Li, Y., Tian, G.Y. and Ward, Stephen (2006) Numerical simulation on magnetic flux leakage evaluation at high speed. NDT & E International, 39 (5). pp. 367-373. ISSN 0963-8695
Li, Y., Wilson, J. and Tian, G.Y. (2007) Experiment and simulation study of 3D magnetic field sensing for magnetic flux leakage defect characterisation. NDT & E International, 40 (2). pp. 179-184. ISSN 0963-8695
Li, Yuhua, Gu, Fengshou, Harris, Georgina, Ball, Andrew, Bennett, Nick and Travis, Ken (2005) The measurement of instantaneous angular speed. Mechanical Systems and Signal Processing, 19 (4). pp. 786-805. ISSN 0888-3270
Lin, D., Jiang, Xiang, Zhang, W., Zhang, L. and Blunt, Liam (2005) Multiplexed fibre interferometer and its application on surface measurement. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)
Lin, Dejiao, Jiang, Xiang, Xie, Fang, Zhang, Wei, Zhang, Lin and Bennion, Ian (2004) High stability multiplexed fibre interferometer and its application on absolute displacement measurement and on-line surface metrology. Optics Express, 12 (23). pp. 5729-5734. ISSN 1094-4087
Lin, Jinshan, Chen, Qian, Tian, Xiange and Gu, Fengshou (2012) Fault Diagnosis of Rolling Bearings using Multifractal Detrended Fluctuation Analysis and Mahalanobis Distance Criterion. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. IEEE, Loughborough, UK, pp. 1-6. ISBN 9781467317221
Liu, Dezheng, Xu, Qiang, Lu, Zhongyu and Barrans, Simon (2013) The development of finite element software for creep deformation and damage analysis of weldment. In: 6th International ‘HIDA’ Conference: Life/Defect Assessment & Failures in High Temperature Plant, 2nd-4th December 2013, Nagasaki, Japan.
Liu, Fulong, Gu, Fengshou, Ball, Andrew, Zhao, Yunshi and Peng, Bo (2017) The Validation of an ACS-SSI based Online Condition Monitoring for Railway Vehicle Suspension Systems using a SIMPACK Model. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017).
Liu, Lande (2009) Application of ultrasound spectroscopy for nanoparticle sizing in high concentration suspensions: A factor analysis on the effects of concentration and frequency. Chemical Engineering Science, 64 (23). pp. 5036-5042. ISSN 0009-2509
Liu, Lande (2010) Population balance modelling for high concentration nanoparticle sizing with ultrasound spectroscopy. Powder Technology, 203 (3). pp. 469-476. ISSN 0032-5910
Liu, Lande, Akay, G. and Tong, L. (2011) Population balance modelling for a flow induced phase inversion based granulation in a two-dimensional rotating agglomerator. Chemical Engineering Research and Design, 89 (1). pp. 39-47. ISSN 0263-8762
Liu, Lande, Li, R.F., Collins, S., Wang, X.Z., Tweedie, R. and Primrose, K. (2011) Ultrasound spectroscopy and electrical resistance tomography for online characterisation of concentrated emulsions in crossflow membrane emulsifications. Powder Technology, 213 (1-3). pp. 123-131. ISSN 0032-5910
Liu, Qiang, Chen, Xun and Gindy, Nabil (2007) Assessment of Al2O3 and superabrasive wheels in nickel-based alloy grinding. International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 940-951. ISSN 0268-3768
Liu, Qiang, Chen, Xun and Gindy, Nabil (2007) Evaluation of superalloy heavy-duty grinding based on multivariate tests. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221 (9). pp. 1421-1430. ISSN 0954-4054
Liu, Qiang, Chen, Xun and Gindy, Nabil (2005) Fuzzy pattern recognition of AE signals for grinding burn. International Journal of Machine Tools and Manufacture, 45 (7-8). pp. 811-818. ISSN 08906955
Liu, Qiang, Chen, Xun and Gindy, Nabil (2006) Investigation of acoustic emission signals under a simulative environment of grinding burn. International Journal of Machine Tools and Manufacture, 46 (3-4). pp. 284-292. ISSN 08906955
Liu, Qiang, Chen, Xun, Wang, Yan and Gindy, Nabil (2008) Empirical modelling of grinding force based on multivariate analysis. Journal of Materials Processing Technology, 203 (1-3). pp. 420-430. ISSN 0924-0136
Liu, Xiaohong, Huang, Shujun, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2017) Full-field calibration of color camera chromatic aberration using absolute phase maps. Sensors, 17 (5). ISSN 1424-8220
Liu, Y. and Chen, Xun (2004) A study on the abrasive water jet cutting for granite. Key Engineering Materials, 257-25. pp. 527-534. ISSN 1662-9795
Liu, Yue, Huang, Shujun, Zhang, Zonghua, Gao, Nan, Gao, Feng and Jiang, Xiang (2017) Full-field 3D shape measurement of discontinuous specular objects by direct phase measuring deflectometry. Scientific Reports, 7 (10293). ISSN 2045-2322
Long, Hua, Lu, Joan, Chao, S. and Yip, Yau Jim (2007) Handoff algorithm improvement and its analysis for mobile networks. In: Proceedings of the 2007 International Conference on Communications. CSREA Press, pp. 66-71. ISBN 1-60132-030-2
Lou, Eric, Lee, Angela and Welfle, Andrew (2017) Greenhouse gases (GHG) performance of refurbishment projects - Lessons from UK higher education student accommodation case studies. Journal of Cleaner Production, 154. pp. 309-317. ISSN 0959-6526
Lou, Shan (2013) Discrete algorithms for morphological filters in geometrical metrology. Doctoral thesis, University of Huddersfield.
Lou, Shan, Jiang, Xiang and Scott, Paul J. (2010) A Fast Algorithm for Morphological Filters. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 190. ISBN 9781862180932
Lou, Shan, Jiang, Xiang and Scott, Paul J. (2012) An Introduction to Morphological Filters in Surface Metrology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 7-13. ISBN 978-1-86218-106-9
Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2014) Applications of Morphological Operations in Surface Metrology and Dimensional Metrology. Journal of Physics: Conference Series, 483. 012020. ISSN 1742-6596
Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) An Efficient Divide-and-Conquer Algorithm for Morphological Filters. Procedia CIRP, 10. pp. 142-147. ISSN 2212-8271
Lozowski, Edward, Oleskiw, Myron, Blackmore, Ryan, Karev, Anatolij, Kollar, László E. and Farzaneh, Masoud (2005) Spongy Icing Revisited: Measurements of Ice Accretion Liquid Fraction in Two Icing Tunnels. In: 43rd AIAA Aerospace Sciences Meeting and Exhibit, 10th - 13th January 2005, Reno, Nevada, USA.
Lu, Joan, Meng, Zhaozong, Lu, Gehao and Stav, John B. (2010) A New Approach in Improving Operational Efficiency of Wireless Response System. In: IEEE 10th International Conference on Computer and Information Technology (CIT), 2010. IEEE, pp. 2676-2683. ISBN 9781424475476
Lu, Joan and Riaz, M. (2004) Building a web-based coupling quotation system in mechanical engineering. In: Advances in E-Engineering and Digital Enterprise Technology: Proceedings of the 4th International Conference on E-Engineering and Digital Enterprise. Wiley, pp. 103-112. ISBN 978-1-86058-467-1
Lu, Kaibo, Lian, Zisheng, Gu, Fengshou and Liu, Hunju (2018) Model-based Chatter Stability Prediction and Detection for the Turning of a Flexible Workpiece. Mechanical Systems and Signal Processing, 100. pp. 814-826. ISSN 0888-3270
Lu, Wenlong (2011) Modelling the Integration between the Design and Inspection Process of Geometrical Specifications for Digital Manufacturing. Doctoral thesis, University of Huddersfield.
Lucas, Gary (2006) Gas volume fraction and velocity profiles: vertical and inclined bubbly air-water flows. Journal of Visualisation, 9 (4). pp. 419-426. ISSN 1343-8875
Lucas, Gary (2012) Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9
Lucas, Gary and Jin, N.D. (2001) Investigation of a drift velocity model for predicting superficial velocities of oil and water in inclined oil-in-water pipe flows with a centre body. Measurement Science and Technology, 12 (9). pp. 1546-1554. ISSN 09570233
Lucas, Gary and Jin, N.D. (2001) A new kinematic wave model for interpreting cross correlation velocity measurements in vertically upward, bubbly oil-in-water flows. Measurement Science and Technology, 12 (9). pp. 1538-1545. ISSN 09570233
Lucas, Gary, Mishra, Rakesh and Panayotopoulos, Nikolaos (2004) Power law approximations to gas volume fraction and velocity profiles in low void fraction vertical gas-liquid flows. Flow Measurement and Instrumentation, 15 (5/6). pp. 271-283. ISSN 0955-5986
Lucas, Gary and Panagiotopoulos, N. (2009) Oil volume fraction and velocity profiles in vertical, bubbly oil-in-water flows. Flow Measurement and Instrumentation. ISSN 09555986
Lucas, Gary, Wang, M. and Mishra, Rakesh (2005) Comparison of bubble velocity components in a swirling gas-liquid pipe flow using dual-plane EIT and a novel 4-sensor local probe. In: 4th World Congress on Industrial Process Tomography, 5 - 8 September 2005, Aizu, Japan. (Unpublished)
Lucas, Gary, Wang, M., Mishra, Rakesh, Dai, Y. and Panatyapolous, N. (2004) Comparison Of gas velocity And volume fraction profiles from a dual-plane ERT system with profiles from a local conductance probe. In: 3rd international symposium on process tomography, 9 - 10 September 2004, Poland. (Unpublished)
Lucas, Gary and Zhao, X. (2013) Large probe arrays for measuring mean and time dependent local oil volume fraction and local oil velocity component distributions in inclined oil-in-water flows. Flow Measurement and Instrumentation, 32. pp. 76-83. ISSN 0955-5986
Lucas, Gary, Zhao, Xin and Pradhan, Suman (2011) Optimisation of four-sensor probes for measuring bubble velocity components in bubbly air–water and oil–water flows. Flow Measurement and Instrumentation, 22 (1). pp. 50-63. ISSN 0955-5986
Luke, Rose, Savage, Christopher J., Jenkins, Andrew Kevin and Fransman, Logan (2017) The failure of transport megaprojects: lessons from developed and developing countries. In: Pan-Pacific Conference XXXIV: Designing New Business Models in Developing Economies, May 29 - 31, 2017, Lima, Peru.
Luo, Hanbin, Guo, Zhitao and Ma, Ling (2013) A safety risk management database for metro construction project. In: Proceedings of the 30th International Conference of CIB W78. CIB, pp. 737-747.
Luo, Yi, Ratnarajah, Tharmalingam, Xue, Jiang and Khan, Faheem A. (2017) Interference Alignment in Two-Tier Randomly Distributed Heterogeneous Wireless Networks Using Stochastic Geometry Approach. IEEE Systems Journal, PP (99). pp. 1-12. ISSN 1932-8184
Ma, J.W., Jiang, Xiang and Blunt, Liam (2004) Complex wavelet transform for extraction of morphological features on surface topography. In: euspen 4th International Conference, 30th May-3rd June 2004, Glasgow. (Unpublished)
Ma, J.W., Jiang, Xiang and Scott, Paul J. (2005) Complex ridgelets for shift invariant characterizaion of surface topography with line singularities. Physics Letters A, 344. pp. 423-431. ISSN 0375-9601
Ma, Ling, Ding, Lieyun and Luo, Hanbin (2014) Non-linear description of ground settlement over twin tunnels in soil. Tunnelling and Underground Space Technology, 42. pp. 144-151. ISSN 0886-7798
Ma, Ling, Luo, Han Bin and Chen, Hua Rong (2013) Safety risk analysis based on a geotechnical instrumentation data warehouse in metro tunnel project. Automation in Construction, 34. pp. 75-84. ISSN 0926-5805
Ma, Ling and Sacks, Rafael (2016) Agent-based simulation of construction workflows using a relational data model. In: IGLC 2016 Proceedings: On the Brink of the Lean Revolution. IGLC, pp. 73-82.
Ma, Ling and Sacks, Rafael (2016) A cloud-based BIM platform for information collaboration. In: 2016 Proceedings of the 33rd ISARC. ISARC, pp. 581-589.
Ma, Ling, Sacks, Rafael, Kattell, Uri and Bloch, Tanya (2018) 3D Object Classification Using Geometric Features and Pairwise Relationships. Computer-Aided Civil and Infrastructure Engineering, 33 (2). pp. 152-164. ISSN 1093-9687
Ma, Ling, Sacks, Rafael and Zeibak-Shini, Reem (2015) Information modeling of earthquake-damaged reinforced concrete structures. Advanced Engineering Informatics, 29 (3). pp. 396-407. ISSN 1474-0346
Ma, Ling, Sacks, Rafael, Zeibak-Shini, Reem, Aryal, Ashrant and Filin, Sagi (2016) Preparation of Synthetic As-Damaged Models for Post-Earthquake BIM Reconstruction Research. Journal of Computing in Civil Engineering, 30 (3). 04015032. ISSN 0887-3801
Ma, Ling, Sacks, Rafael, Zeibak-Shini, Reem and Filin, Sagi (2015) A Computational Procedure for Generating Specimens of BIM and Point Cloud Data for Building Change Detection. In: Computing in Civil Engineering 2015 : Proceedings of the 2015 International Workshop on Computing in Civil Engineering. ACSE, pp. 684-691. ISBN 9780784479247
Ma, Zhiliang, Lu, Ning and Wu, Song (2011) Identification and representation of information resources for construction firms. Advanced Engineering Informatics, 25 (4). pp. 612-624. ISSN 14740346
Maatgi, Musbah (2014) An Exploratory Study to Examine Relationships Between the Work Environment and Success of ISO 9000 Implementation in the Context of SMEs. Doctoral thesis, University of Huddersfield.
Maatgi, Musbah and Denton, Paul (2010) Achieving ISO 9000 Success in SMEs: The Development of a Work Environment Framework. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 37-42. ISBN 9781862180932
Madamedon, Misan, Gu, Fengshou, Aburass, Ali and Ball, Andrew (2016) Online Estimation of Engine Driveline Dynamic Properties. In: International Conference for Student on Applied engineering, 20-21st October 2016, Newcastle. (Unpublished)
Mahmood, Faaiz Hadi (2017) Implementation of Offset Pulse Position Modulation. Doctoral thesis, University of Huddersfield.
Malviya, Vihar, Mishra, Rakesh and Gundala, Naresh (2009) CFD-Based Modelling of the Variation of Aerodynamic Coefficients with Wind Angle. In: Proceeding of National Conference on Fluid Mechanics & Fluid Power 17-19 December 2009. College of Engineering Pune, Pune, India.
Mansoor, Shahid (2009) An Investigation into Designing a Derivative Vehicle. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Marangwanda, Gilbert and Mishra, Rakesh (2013) Response surface optimization of a fluid regulating control valve. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 234. ISBN 9781862181212
Marangwanda, Gilbert Kudzai (2020) COMPUTATIONAL FLUID DYNAMICS BASED DIAGNOSTICS AND PREDICTION TOOL FOR OPTIMAL DESIGN OF MULTISTAGE TRIM CONTROL VALVES. Doctoral thesis, University of Huddersfield.
Martin, Haydn (2015) High resolution point-sensing using template matching to extract phase from spectral interferograms. In: Photonex 15: Optical Metrology - Latest developments in instrumentation for industry and research, 14th - 15th October 2015, Coventry, UK. (Submitted)
Martin, Haydn (2006) A self stabilising multiplexed interferometer for on-line surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.
Martin, Haydn and Jiang, Xiang (2009) Phase Feedback Active Stabilisation Of A Multiplexed Fibre Interferometer. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Martin, Haydn, Wang, Kaiwei and Jiang, Xiang (2008) Vibration compensating beam scanning interferometer for surface measurement. Applied Optics, 47 (7). pp. 888-893. ISSN 0003-6935
Masbah, Aeman and Lu, Joan (2016) Automatic Image Marking Process. In: INFOCOMP 2016 : The Sixth International Conference on Advanced Communications and Computation. IARIA, pp. 7-11. ISBN 978-1-61208-478-7
Matthew, Eduardo J. Samuel (2017) Investigating Sold Particle Erosion of Pipeline Material. Masters thesis, University of Huddersfield.
Matthies, A.K., Racasan, Radu, Bills, Paul J., Panagiotidou, A, Blunt, Liam, Skinner, J., Blunn, G and Hart, A. J. (2012) Corrosion is the main mechanism of material loss at the taper junction of large head metal on metal hip replacements. In: British Orthopaedic Society Annual Meeting, September 24th-25th 2012, London, UK. (Unpublished)
Mavromihales, Mike (2015) A methodology for delivering manufacturing technology and workshop appreciation to undergraduate engineers & technologists. In: Inspire Conference, 14 January 2015, University of Huddersfield, UK. (Submitted)
Mavromihales, Mike and Holmes, Violeta (2016) Delivering manufacturing technology and workshop appreciation to engineering undergraduates using the flipped classroom approach. International Journal of Mechanical Engineering Education. ISSN 0306-4190
McCluskey, T.L. and Kitchin, Diane E. (1998) A Tool-Supported Approach to Engineering HTN Planning Models. In: Tenth IEEE International Conference on Tools with Artificial Intelligence, 1998, Taiwan.
McCluskey, T.L., Liu, D. and Simpson, R.M. (2003) GIPO II: HTN planning in a tool-supported knowledge engineering environment. In: Proceedings of the Thirteenth International Conference on Automated Planning and Scheduling. AAAI Press, Menlo Park, California, pp. 92-101. ISBN 1577351878
Meng, Yiqing (2016) Imaging of the Water Velocity Distribution in Water Continous Multiphase Flows Using Inductive Flow Tomography (IFT). Doctoral thesis, University of Huddersfield.
Meng, Yiqing and Lucas, Gary (2017) Imaging water velocity and volume fraction distributions in water continuous multiphase flows using inductive flow tomography and electrical resistance tomography. Measurement Science and Technology, 28 (5). ISSN 0957-0233
Meng, Yiqing and Lucas, Gary (2012) A Multiphase Flow Measurement System Comprising an Impedance Cross Correlation (ICC) Device and an Imaging Electromagnetic Flow Meter (IEF). In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 157. ISBN 978-1-86218-106-9
Meng, Yiqing and Lucas, Gary (2013) Two-phase flow meter for determining water and solids volumetric flow rate in stratified solids-in-water flows. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 37-42. ISBN 9781862181212
Meng, Zhaozong and Lu, Joan (2011) Implementing the Emerging Mobile Technologies in Facilitating Mobile Exam System. In: 2nd International Conference on Networking and Information Technology. IPCSIT 25th-26th November 2011, 17 . IACSIT Press, Hong Kong, China, pp. 80-88. ISBN 978-981-07-0680-7
Meng, Zhaozong and Lu, Joan (2011) Opportunities of Interactive Learning Systems with Evolutions in Mobile Devices: A Case Study. In: Proceedings of the 2011 International Conference on Internet Computing ICOMP 2011. CSREA Press, pp. 238-244. ISBN 1601321864
Meng, Zhaozong, Lu, Joan and Sawsaa, Ahlam (2013) Integrating Smartphone’s Intelligent Techniques on Authentication in Mobile Exam Login Process. In: Computational Collective Intelligence. Technologies and Applications: 5th International Conference, ICCCI 2013, Craiova, Romania, September 11-13, 2013, Proceedings. Lecture Notes in Computer Science (8083). Springer, London, pp. 130-142. ISBN 978-3-642-40494-8
Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) The significance of air pockets for modelling thermal errors of machine tools. In: Laser Metrology and Machine Performance X. Lamdamap 2013 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, 10 . EUSPEN, Bedfordshire, UK, pp. 189-198. ISBN 978-0-9566790-1-7
Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2009) Novel and Efficient Thermal Error Reduction Strategy For Machine Tool Performance Improvement. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2008) Novel and efficient thermal error reduction strategy for machine tool performance improvement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 15-22. ISBN 978-1-86218-067-3
Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2010) Novel and efficient thermal error reduction strategy for machine tool performance improvement. In: University of Huddersfield Annual Research Festival School of Computing and Engineering 12th March 2010, Friday 12th March 2010, University of Huddersfield. (Unpublished)
Mills, S, Ling, D, Bevan, Adam, Rhodes, A and Molyneux-Berry, Paul (2011) Improving the rail industry's vehicle-track interaction strategic model (VTISM) to include wheelset management modelling. In: IET and IAM Asset Management Conference 2011. IET, London, UK, pp. 1-5. ISBN 978-1-84919-569-0
Miron, Luciana, Talebi, Saeed, Koskela, Lauri and Tezel, Algan (2016) Evaluation of Continuous Improvement Programmes. In: 24th Annual Conference of the International Group for Lean Construction, 18th - 24th July 2016, Boston, USA.
Mishra, Rakesh, Barrans, Simon and Pislaru, Crinela (2009) Imparting psychomotor skills to the learners using computer aided instructions in Engineering Education. In: V International Conference on Multimedia and Information and Communication Technologies in Education, 22-24 April 2009, Lisbon, Portugal. (Unpublished)
Mishra, Rakesh, Fabien, C., Singh, S.N. and Seshadri, V. (2001) Holdup in multisized particulate solid-liquid flow through horizontal pipe. Indian Journal of Engineering & Materials Sciences, 8. pp. 84-89. ISSN 0971-4588
Mishra, Rakesh, Singh, S.N. and Seshadri, V. (1998) Study of wear characteristics and solid distribution in constant area and erosion-resistant long-radius pipe bends for the flow of multisized particulate slurries. Wear, 217 (2). pp. 297-306. ISSN 0043-1648
Mishra, Rakesh, Singh, S.N. and Seshadri, V. (1998) Velocity measurement in solid–liquid flows using an impact probe. Flow Measurement and Instrumentation, 8 (3-4). pp. 157-165. ISSN 0955-5986
Mistry, Keyur, Lazaridis, Pavlos, Glover, Ian, Holmes, Violeta, Khan, Faheem A., Ahmed, Qasim Z., Zaharis, Zaharias D. and Xenos, Thomas D. (2017) Measurement, simulation and optimization of wideband log-periodic antennas. In: URSI GASS 2017, 19-26 August 2017, Montreal, Canada.
Moder, Jeffrey P., Chai, John, Parthasarathy, Girija, Lee, HaeOk S. and Patankar, Suhas V. (1996) Nonaxisymmetric radiative transfer in cylindrical enclosures. Numerical Heat Transfer, Part B: Fundamentals, 30 (4). pp. 437-452. ISSN 1040-7790
Mohamad, Hamd, Lazaridis, Pavlos, Upton, D., Khan, U., Saeed, B., Jaber, Adel, Zhang, Y., Mather, P., Vieira, M. F. Q., Barlee, K., Atkinson, D. S. W. and Glover, I. A. (2017) Partial discharge detection using software defined radio. In: 2016 International Conference for Students on Applied Engineering (ISCAE). IEEE, pp. 373-376. ISBN 9781467390538
Mohamed, Hamd (2018) Partial Discharge Detection and localization Using Software Defined Radio in the future smart grid. Doctoral thesis, University of Huddersfield.
Mohamed, Zavid (2019) DEVELOPMENT OF A LOW COST PRECISION POLISHING MACHINE BASED ON PARALLEL KINEMATIC SYSTEM. Doctoral thesis, University of Huddersfield.
Mohamed, Zavid, Blunt, Liam, Young, Christian, Tong, Zhen and Li, Duo (2017) Development of precision polishing machine based on a hexapod. In: euspen's 17th International Conference, 29 May - 2 June 2017, Hannover, Germany. (Unpublished)
Mohammed, Hasanain, Sibley, Martin J.N. and Mather, Peter (2010) Investigation of doppler effects on high mobility OFDM-MIMO systems. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 142-147. ISBN 9781862180932
Mohd Ali, Ali, Sibley, Martin J.N. and Glover, Ian (2017) WLAN 802.11e evaluation performance using OPNET. International Journal of All Research Education & Scientific Methods (IJARESM), 5 (1). pp. 35-38. ISSN 2455-6211
Molyneux-Berry, Paul and Bevan, Adam (2013) The Influence of Route Characteristics, Train Design and Maintenance Policy on Wheel Tread Damage, Wheel Life and Costs for Multiple-Unit Trains. In: 17th International Wheelset Congress, September 22-27 2013, Kiev, Ukraine.
Molyneux-Berry, Paul and Bevan, Adam (2016) Reducing Rail RCF through Better Wheel Shapes. In: ICRI Workshop on Wear and RCF, 02/08/2016 - 04/08/2016, Vancouver. (Unpublished)
Molyneux-Berry, Paul and Bevan, Adam (2013) Residual stresses in railway wheels and their effect on damage rates through the life of a wheel. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 31-36. ISBN 9781862181212
Molyneux-Berry, Paul and Bevan, Adam (2012) Wheel surface damage: relating the position and angle of forces to the observed damage patterns. Vehicle System Dynamics, 50 (S1). pp. 335-347. ISSN 0042-3114
Molyneux-Berry, Paul, Bevan, Adam, Zhang, S. Y and Kabra, S (2014) Residual Stress in Wheels: Comparison of Neutron Diffraction and Ultrasonic Methods, with Trends in RCF. In: The Second International Conference on Railway Technology: Research, Development and Maintenance, 8-11 April 2014, Corsica, France.
Molyneux-Berry, Paul, Davis, Claire and Bevan, Adam (2014) The Influence of Wheel/Rail Contact Conditions on the Microstructure and Hardness of Railway Wheels. The Scientific World Journal, 2014 (209752). pp. 1-16. ISSN 1537-744X
Mones, Zainab (2018) INVESTIGATION OF DYNAMIC RESPONSES OF ON-ROTOR WIRELESS SENSORS FOR CONDITION MONITORING OF ROTATING MACHINES. Doctoral thesis, University of Huddersfield.
Mones, Zainab, Zeng, Q., Hu, L., Tang, Xiaoli, Gu, Fengshou and Ball, Andrew (2017) Planetary Gearbox Fault Diagnosis Using an On-Rotor MEMS Accelerometer. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601
Moore, Austin (2017) An Investigation into Non-Linear Sonic Signatures with a Focus on Dynamic Range Compression and the 1176 Fet Compressor. Doctoral thesis, University of Huddersfield.
Moore, Austin and Wakefield, Jonathan (2017) An Investigation into the Relationship Between the Subjective Descriptor Aggressive and the Universal Audio 1176 FET Compressor. In: Audio Engineering Society 142nd, May 20-23 2017, Berlin.
Moore, David J. and Wakefield, Jonathan P. (2010) A Design Tool to Produce Optimised Ambisonic Decoders. In: 40th International Audio Engineering Society Conference - Spatial Audio, 8-10 October 2010, Tokyo, Japan.
Moore, David J. and Wakefield, Jonathan P. (2008) Exploiting human spatial resolution in surround sound decoder design. In: 125th Audio Engineering Society Convention, 2-5 October 2008, San Francisco, USA.
Moore, David J. and Wakefield, Jonathan P. (2010) Optimisation of the Localisation Performance of Irregular Ambisonic Decoders for Multiple Off-Centre Listeners. In: 128th Audio Engineering Society Convention, 22-25 May 2010, London, UK.
Moore, David J. and Wakefield, Jonathan P. (2009) The Potential of High Performance Computing in Audio Engineering. In: 126th Audio Engineering Society Convention, 7-10 May 2009, Munich, Germany. (Unpublished)
Moore, David J. and Wakefield, Jonathan P. (2007) Surround Sound for Large Audiences: What are the Problems? In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.
Moore, David J. and Wakefield, Jonathan P. (2007) The design and analysis of first order ambisonic decoders for the ITU layout. In: 122nd Audio Engineering Society Convention, 5th-8th May, 2007, Vienna, Austria.
Moore, David J. and Wakefield, Jonathan P. (2008) The design of ambisonic decoders for the ITU 5.1 layout with even performance characteristics. In: 124th Audio Engineering Society Convention, 17-20 May 2008, Amsterdam, The Netherlands.
Moore, David J. and Wakefield, Jonathan P. (2007) The design of improved first order ambisonic decoders by the application of range removal and importance in a heuristic search algorithm. In: 31st Audio Engineering Society International Conference, 25th-27th June 2007, London, UK.
Moore, John David and Wakefield, Jonathan P. (2006) An enhanced approach to surround sound decoder design. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.
Moore, P.J., Portugues, I. and Glover, Ian (2003) A nonintrusive partial discharge measurement system based on RF technology. In: 2003 IEEE Power Engineering Society General Meeting (IEEE Cat. No.03CH37491). IEEE, pp. 628-633. ISBN 9780780379893
Moore, P.J., Portugues, I.E. and Glover, Ian (2004) Remote diagnosis of overhead line insulation defects. In: IEEE Power Engineering Society General Meeting, 2004. IEEE, pp. 1831-1835. ISBN 9780780384651
Moorkamp, Matthijs, Kramer, Erik-Hans, Van Gulijk, Coen and Ale, Ben (2014) Safety management theory and the military expeditionary organization: A critical theoretical reflection. Journal of Safety Science, 69. pp. 71-81. ISSN 0925-7535
Moschetti, Giuseppe (2013) Development of on-line interferometric metrology techniques for high dynamic range surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 235. ISBN 9781862181212
Moschetti, Giuseppe, Muhamedsalih, Hussam, Connor, Daniel, Jiang, Xiang and Leach, Richard K. (2015) Vertical axis non-linearities in wavelength scanning interferometry. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 31-39. ISBN 978-0-9566790-5-5
Mostafa, Kamrunnasim (2015) Theoretical Analyses and Practical Implementation of Duobinary Pulse Position Modulation Using Mathcad, VHDL, FPGA and Purpose-built Transceiver. Doctoral thesis, University of Huddersfield.
Mostafa, Kamrunnasim, Sibley, Martin J.N. and Mather, Peter (2014) Duobinary pulse position modulation – a novel coding scheme for the dispersive optical channel. IET Optoelectronics, 8 (6). pp. 264-269. ISSN 1751-8768
Mostafa, Kamrunnasim, Sibley, Martin J.N. and Mather, Peter (2013) Simulation and timing analyses of VHDL models of coder and decoder of duobinary pulse position modulation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 165-170. ISBN 9781862181212
Moxon, Samuel R., Cooke, Megan E., Cox, Sophie C., Smow, Martyn, Jeys, Lee, Jones, Simon W., Grover, Liam M. and Smith, Alan M. (2017) Suspended manufacture of biological structures. Advanced Materials, 29 (13). ISSN 0935-9648
Muhamedsalih, Hussam (2013) Investigation of Wavelength Scanning Interferometry for Embedded Metrology. Doctoral thesis, University of Huddersfield.
Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2010) Vibration compensation of wavelength scanning interferometer for in-process surface inspection. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 148-153. ISBN 9781862180932
Muhamedsalih, Hussam, Jiang, Xiang and Gao, Feng (2013) Accelerated Surface Measurement Using Wavelength Scanning Interferometer with Compensation of Environmental Noise. Procedia CIRP, 10. pp. 70-76. ISSN 2212-8271
Muhamedsalih, Hussam, Jiang, Xiang and Wang, Kaiwei (2009) Surface Profile Height Measurement Using Optical Interferometry Method. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Muhamedsalih, Yousif, Bevan, Adam and Stow, Julian (2016) Wheel Wear and Rail Damage Prediction for Wheels Turned with Thin Flanges. In: 11th World Congress on Railway Research, 29th May - 2nd June 2016, Milan, Italy. (Unpublished)
Muhamedsalih, Yousif and Lucas, Gary (2012) A Non-Intrusive Impedance Cross-Correlation (ICC) Flow Meter for Dispersed Phase Velocity and Volume Fraction Profile Measurement in Two Phase Flows. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 38-44. ISBN 978-1-86218-106-9
Muhamedsalih, Yousif, Lucas, Gary, Meng, Y.Q. and Leeungculsatien, Teerachai (2013) Two-phase flow meter for determining water and solids volumetric flow rate in inclined solids-in-water flows. In: 7th World Congress on Industrial Process Tomography. WCIPT7 . International Society for Industrial Process Tomography, Krakow, Poland, pp. 41-50. ISBN 978 0 853 16323 7
Muhamedsalih, Yousif, Lucas, Gary and Meng, Yiqing (2015) A two-phase flowmeter for determining water and solids volumetric flow rates in stratified, inclined solids-in-water flows. Flow Measurement and Instrumentation, 45. pp. 207-217. ISSN 0955-5986
Muo, Ugonnaya E. (2018) Characterising Vibro-Acoustic Signals of a Reciprocating Compressor for Condition Monitoring. Doctoral thesis, University of Huddersfield.
Muo, Ugonnaya E., Madamedon, Misan, Gu, Fengshou and Ball, Andrew (2017) Wavelet Packet Analysis and Empirical Mode Decomposition for the Fault Diagnosis of Reciprocating Compressors. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017).
Murata, Koichi, Tezel, Algan, Koskela, Lauri and Tzortzopoulos, Patricia (2017) An Application of Control Theory to Visual Management for Organizational Communication in Construction. In: 25th Annual Conference of the International Group for Lean Construction, 9th-12th July 2017, Heraklion, Greece.
Musbah, Abdurazzaq (2015) Wet Gas Flow Metering Technique Using a Venturi With Conductance Sensors. Doctoral thesis, University of Huddersfield.
Musbah, Abdurazzaq and Lucas, Gary (2012) Experimental and theoretical study of annular flow using a venturi with conductance sensors. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 123-128. ISBN 978-1-86218-106-9
Musbah, Abdurazzaq and Lucas, Gary (2012) Wet gas flow metering technique using a venturi with conductance sensors. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 159. ISBN 978-1-86218-106-9
Myers, Alan (2017) The Effect of Concrete Foundations and Machine Thermal Conditions on the Accuracy of Large Machine Tools. Doctoral thesis, University of Huddersfield.
Myers, Alan (2004) Firm foundations for sure. Machinery, 162 (4. p. 48.
Myers, Alan, Ford, Derek G. and Xu, Q. (2005) Measurement techniques for determining the static stiffness of foundations for machine tools. Journal Paper of Physics: Conference Series, 13. pp. 410-413. ISSN 1742-6588
Myers, Tianna (2019) Exploring Students’ Experiences of Studying Engineering in Higher Education. Masters thesis, University of Huddersfield.
Mynett, Mark, Wakefield, Jonathan P. and Till, Rupert (2010) Intelligent Equalisation Principles and Techniques for Minimising Masking when Mixing the Extreme Modern Metal Genre. In: Heavy Fundamentalisms: Music, Metal and Politics. Inter-Disciplinary Press, Oxford, pp. 141-146. ISBN 978-1-84888-017-7
Müller, M. and Blunt, Liam (2009) Predicting The Axial Load Of Capacity Of Joints Formed By V-Band Retainers. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Needham, Paul M. (2006) Design for Six Sigma, its Potential Effect on Weight in Modern Military Aircraft. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.
Newall, Matthew (2015) GPU cluster for acceleration of scientific and engineering applications in the context of higher education. Masters thesis, University of Huddersfield.
Ngigi, R. W., Pislaru, Crinela, Ball, Andrew, Fengshou, Gu and Anyakwo, Arthur (2011) Predictive Control Strategies Used to Solve Challenges Related to Modern Railway Vehicles. In: 5th IET Conference on Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 29-30 November 2011, Derby Conference Centre, UK.
Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Review of control strategies used in modern railway vehicles. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 160. ISBN 978-1-86218-106-9
Nguyen, Nam-Trung, Ting, Teck-Hui, Yap, Yit-Fatt, Wong, Teck-Neng, Chai, John, Ong, Wee-Liat, Zhou, Junlong, Tan, Say-Hwa and Yobas, Levent (2007) Thermally mediated droplet formation in microchannels. Applied Physics Letters, 91 (8). 084102. ISSN 0003-6951
Nikitas, Alexandros, Avineri, Erel and Parkhurst, Graham (2016) Road Pricing and Older People: An In-depth Study of Attitudes, Pro-Social Values and Social Norms. In: 48th Annual Universities' Transport Study Group Conference, 6-8, January 2016, Bristol. (Unpublished)
Nikitas, Alexandros, Wallgren, Pontus and Rexfelt, Oskar (2016) The paradox of public acceptance of bike sharing in Gothenburg. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 169 (3). pp. 101-113. ISSN 1478-4629
Nikitas, Vasilios, Nikitas, Nikolaos and Nikitas, Alexandros (2008) Bernoulli's Transformation of the Response of an Elastic Body and Damping. In: Proceedings of the 7th European Conference on Structural Dynamics, 7th - 9th July 2008, Southampton, UK.
Nikitas, Vasilios, Nikitas, Nikolaos and Nikitas, Alexandros (2009) Nonconservative Nature of the Stresses Developed in a Continuum. Journal of the Mechanical Behavior of Materials, 19 (6). pp. 393-406. ISSN 2191-0243
Nikolaidis, K. and Sibley, Martin J.N. (2009) Optimum mapping in an optical multiple pulse position modulation link using a maximum likelihood sequence detection scheme. IET Optoelectronics, 3 (1). pp. 47-53. ISSN 1751-8768
Nikolaidis, Konstantinos (2008) An Investigation of an Optical Multiple Pulse Position Modulation Link over a Dispersive Optical Channel. Doctoral thesis, University of Huddersfield.
Ntampiza, Kalina and Zioga, Polina (2014) The Interconnected Object: Are You at Home in a Network? In: Proceedings of 1st International Academic Conference Places and Technologies 2014. University of Belgrade – Faculty of Architecture, Belgrade, Serbia, pp. 936-943. ISBN 978-86-7924-114-6
Obie, Ogheneochuko (2018) Density Measurement of Multiphase Pipe Flows. Doctoral thesis, University of Huddersfield.
Odunze, N., Mishra, Rakesh and Reed, J. (2007) The CFD analysis of the effects of the size and location of an Air-Inlet in domestic kitchen extraction. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.
Okwuikpo, Chukwubiadam (2019) Development of Novel Computational Fluid Dynamics (CFD) based Calibration Methods for Pipeline Fluid Flow Measurement. Doctoral thesis, University of Huddersfield.
Olqma, Ossama, Kollar, László E., Farzaneh, Masoud and Pellet, Laure (2009) Modeling Wet-Snow Shedding from Current-Carrying Conductors. In: 13th International Workshop on Atmospheric Icing of Structures, 8th - 11th September 2009, Andermatt, Switzerland.
Oluwajobi, Akinjide O. and Chen, Xun (2010) The Effect of Interatomic Potentials on Nanometric Abrasive Machining. In: Proceedings of the 16th International Conference on Automation & Computing, University of Birmingham, Birmingham, UK, 11 September 2010. Chinese Automation and Computing Society in the UK, pp. 130-135. ISBN 9780955529368
Oluwajobi, Akinjide O. and Chen, Xun (2010) On Minimum Depth of Cut in nanomachining. In: Advances in manufacturing technology. Durham University and Glasgow Caledonian University, Durham, pp. 174-179. ISBN 9781905866519
Oluwajobi, Akinjide O. and Chen, Xun (2009) Simulation of Abrasive Machining Using Molecular Dynamics. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Onilude, Ayodele (2017) A Novel Method for Phase Distribution Measurement in Water Continuous Two-Phase Flow. Doctoral thesis, University of Huddersfield.
Oostendorp, Yvette, Lemkowitz, Saul, Zwaard, Walter, Van Gulijk, Coen and Swuste, Paul (2016) Introduction of the concept of risk within safety science in The Netherlands focussing on the years 1970–1990. Safety Science, 85. pp. 205-219. ISSN 0925-7535
Othman, Aisha, Impes, Ahmed and Pislaru, Crinela (2013) Online Interactive Module for Teaching a Computer Programming Course. In: Proceedings of the 12th European Conference on eLearning. ECEL 2013 . Academic Conferences and Publishing International Limited, Sophia Antipolis, France. ISBN 978-1-909507-82-1
Othman, Aisha and Pislaru, Crinela (2014) Increasing the quality of student outcomes by using e-learning system in computer programming courses. In: Libya Higher Education Forum, 5th-6th June 2014, London, UK.
Othman, Aisha, Pislaru, Crinela and Impes, Ahmed (2014) Improving the Quality of Technology-Enhanced Learning for Computer Programming Courses. International Journal of Information and Education Technology, 4 (1). pp. 83-88. ISSN 2010-3689
Pagani, Luca, Qi, Qunfen, Jiang, Xiangqian and Scott, Paul J. (2017) Towards a new definition of areal surface texture parameters on freeform surface. Measurement, 109. pp. 281-291. ISSN 0263-2241
Palmer, Edward, Mishra, Rakesh and Fieldhouse, John D. (2006) Analysis of air flow and heat dissipation from a high performance passenger car front brake rotor. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.
Papananias, Moschos (2018) COMBINED NUMERICAL AND STATISTICAL MODELLING FOR IN-DEPTH UNCERTAINTY EVALUATION OF COMPARATIVE COORDINATE MEASUREMENT. Doctoral thesis, University of Huddersfield.
Park, Kyooseon (2013) Optimal Design of a Micro Vertical Axis Wind Turbine for Sustainable Urban Environment. Doctoral thesis, University of Huddersfield.
Parkinson, S., Longstaff, Andrew P., Crampton, Andrew, Fletcher, Simon, Allen, Gary and Myers, Alan (2012) Automation as a Solution for Machine Tool Calibration Planning. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 57-62. ISBN 978-1-86218-106-9
Parkinson, Simon, Longstaff, Andrew P., Crampton, Andrew and Gregory, Peter (2012) The Application of Automated Planning to Machine Tool Calibration. In: Proceedings of the 22nd International Conference on Automated Planning and Scheduling (ICAPS 2012). ICAPS 2012, Atibaia, São Paulo, Brazil, pp. 216-224. ISBN 9781577355625
Parkinson, Simon, Longstaff, Andrew P., Fletcher, Simon, Crampton, Andrew and Gregory, Peter (2012) Automatic planning for machine tool calibration: A case study. Expert Systems with Applications, 39 (13). pp. 11367-11377. ISSN 09574174
Parthasarathy, Girija, Lee, H. S., Chai, John and Patankar, S. V. (1995) Monte Carlo Solutions for Radiative Heat Transfer in Irregular Two-Dimensional Geometries. Journal of Heat Transfer, 117 (3). p. 792. ISSN 0022-1481
Pashley, Joe (2022) Development of a Fused Metrology Method for Detailed Analysis of Worn Hip Implant Bearing Components. Doctoral thesis, University of Huddersfield.
Peng, H.P., Jiang, Xiang and Liu, X.J. (2008) Concurrent optimal allocation of design and process tolerances for mechanical assemblies with interrelated dimension chains. International Journal of Production Research, 46 (24). pp. 6963-6979. ISSN 00207543
Peng, H.P., Jiang, Xiang, Xu, Zhijie and Liu, X.J. (2008) Optimal tolerance design for products with correlated characteristics by considering the present worth of quality loss. International Journal of Advanced Manufacturing Technology, 39 (1-2). pp. 1-8. ISSN 0268-3768
Penzenstadler, Birgit and Venters, Colin (2017) Software Engineering for Sustainability: Tools for Sustainability Analysis. In: Digital Technology and Sustainability: Engaging the Paradox. Routledge Studies in Sustainability . Routledge. ISBN 9781138205888
Perera, Srinath, Henriksen, Hans Jorgen, Revez, Alexandra, Shklovski, Irina, Asare-Kyei, D, Kloos, Julia, Renaud, Fabrice, Nguyen, Cuong V, Fien, John, Cheong, France, Meding, Jason Von, Mohammad, Shaikh Mehdee, Collins, Andrew E, Liu, Yihong, Yumarni, Tri, Haigh, Richard, Amaratunga, Dilanthi, Salem, Ahoo, Patrão, António, Salas, Alicia Flores and Fenn, Peter (2013) Proceedings of the ANDROID Doctoral School. ANDROID Residential Doctoral School, Limassol, Cyprus. ISBN 978-1-907842-52-8
Perry, Sam (2017) Descriptor driven concatenative synthesis tool for Python. Fields: journal of Huddersfield student research, 3 (1). ISSN 2057-0163
Pikas, Ergo, Koskela, Lauri and Liias, Roode (2017) Design Management in a Design Office: Development of the Knowledge Base. In: 25th Annual Conference of the International Group for Lean Construction, 9th-12th July 2017, Heraklion, Greece.
Pikas, Ergo, Koskela, Lauri and Seppänen, Olli (2017) Design Management in a Design Office: Development of the Model for 'To-Be'. In: 25th Annual Conference of the International Group for Lean Construction, 9th-12th July 2017, Heraklion, Greece.
Pikas, Ergo, Koskela, Lauri and Seppänen, Olli (2017) Design Management in a Design Office: Solving the Problem of Relevance. In: 25th Annual Conference of the International Group for Lean Construction, 9th-12th July 2017, Heraklion, Greece.
Pikas, Ergo, Koskela, Lauri, Singh, Vishal, Dave, Bhargav, Liias, Roode and Sacks, Rafael (2016) Application of the Domain Theory to Warehouse Concept Development: A Case Study. In: Proceedings of the CIB World Building Congress 2016: Volume V - Advancing Products and Services. Tampere University of Technology. Department of Civil Engineering. Construction Management and Economics. Report, 5 (18). Tampere University of Technology. Department of Civil Engineering, pp. 374-385. ISBN 978-952-15-3745-5
Pillutla, Girish Sarma (2017) Design and Development of Stand-Alone Water Filled Radiator System for Built Environment Applications. Doctoral thesis, University of Huddersfield.
Pislaru, Crinela (2009) Improving Engineering Education by Using an Interactive Multimedia Learning Environment. In: Learning: the sixteenth international conference on Learning, 1-4 July 2009, University of Barcelona, Spain.
Pislaru, Crinela (2009) Improving engineering by using an interactive multimedia learning environment. In: The sixteenth International Conference on Learning, 1st-4th July 2009, Barcelona, Spain.
Pislaru, Crinela (2009) Optimisation of real-time implementation for high speed feed drives models. In: Lamdamap 9th International Conference, 30th June – 2nd July 2009, Brunel University. (Unpublished)
Pislaru, Crinela (2009) Using blended learning to explain complex scientific notions. In: Teaching and Learning Conference 2009 - Inspire: Delivering inspiring teaching, Monday 14th September 2009, University of Huddersfield, UK. (Unpublished)
Pislaru, Crinela, Ford, Derek G. and Myers, Alan (2009) Novel condition monitoring technique used for improved CNC machine tool performance. In: Laser metrology and machine performance IX. Euspen, pp. 176-186. ISBN 9780955308277
Pislaru, Crinela, Freeman, J.M. and Ford, Derek G. (2003) Modal parameter identification for CNC machine tools using wavelet transform. International Journal of Machine Tools and Manufacture, 43 (10). pp. 987-993. ISSN 0890-6955
Pitts, Adrian (2016) Impacts of Variations in Air Conditioning System Set-Point Temperature on Room Conditions and Perceived Thermal Comfort. In: Proceedings of the 9th Windsor Conference : Making comfort relevant. NCEUB, pp. 600-611. ISBN 9780992895730
Pitts, Adrian (2014) Prevalence and Evaluation of Bioclimatic Design Techniques used to achieve Low Energy Comfort in Architectural Design Proposals. In: Proceedings of The Windsor Conference: Counting the Cost of Comfort. 8th Windsor Conference 10th-13th April 2014 . NCEUB: Network for Comfort and Energy Use in Buildings, Windsor, UK, pp. 1078-1090. ISBN 9780992895709
Pitts, Adrian (2013) Thermal Comfort in Transition Spaces. Buildings, 3 (1). pp. 122-142. ISSN 2075-5309
Pitts, Adrian and Gao, Yun (2017) Sustainable and Green Design in Villages of Rural Southwest China. In: PLEA 2017, 3rd-5th July, 2017, Edinburgh, UK.
Popov, O. and Vishnyakov, Vladimir (2017) Fracture toughness in some hetero-modulus composite carbides: carbon inclusions and voids. Advances in Applied Ceramics. Advances in Applied Ceramics : Structural, Functional and Bioceramics, 116 (2). pp. 61-70. ISSN 1743-6753
Portugues, I., Moore, P.J. and Glover, Ian (2003) Frequency domain characterisation of partial discharges via a non-invasive measurement system. In: Proceedings of the 7th International Conference on Properties and Applications of Dielectric Materials (Cat. No.03CH37417). IEEE, pp. 835-838. ISBN 9780780377257
Portugues, I., Moore, P.J. and Glover, Ian (2003) The effect of multipath in time domain characterization of partial discharges. In: Proceedings of the 7th International Conference on Properties and Applications of Dielectric Materials (Cat. No.03CH37417). IEEE, pp. 311-314. ISBN 9780780377257
Portugues, I.E., Moore, P.J. and Glover, Ian (2002) Partial discharge localization for efficient radio spectrum management. In: Annual Report Conference on Electrical Insulation and Dielectric Phenomena. IEEE, pp. 466-469. ISBN 9780780375024
Portugues, I.E., Moore, P.J., Glover, Ian and Watson, R.J. (2008) A Portable Wideband Impulsive Noise Location System. IEEE Transactions on Instrumentation and Measurement, 57 (9). pp. 2059-2066. ISSN 0018-9456
Portugues, Iliana E., Moore, Philip J., Glover, Ian, Johnstone, Carl, McKosky, Ralph H., Goff, Mark B. and van der Zel, Luke (2009) RF-Based Partial Discharge Early Warning System for Air-Insulated Substations. IEEE Transactions on Power Delivery, 24 (1). pp. 20-29. ISSN 0885-8977
Postlethwaite, Scott R. (1992) Electronic based accuracy enhancement of CNC machine tools. Doctoral thesis, Huddersfield Polytechnic.
Potdar, Akshay Anand (2016) Reducing the uncertainty of thermal model calibration using on-machine probing and data fusion. Doctoral thesis, University of Huddersfield.
Power, Jess (2014) A Honeypot of rich ideas – Building online communities to promote knowledge exchange and collaboration between creative arts and engineering. In: The 21st annual conference of the Association for Learning Technology: altc2014 Riding Giants: How to innovate and educate ahead of the wave, Monday 1st - Wednesday 3rd September, 2014, Warwick, UK.
Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, Simon and Pislaru, Crinela (2010) Off-line investigation of machine tool non-rigid errors. In: University of Huddersfield Annual Research Festival School of Computing and Engineering 12th March 2010, Friday 12th March 2010, University of Huddersfield. (Unpublished)
Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, Simon and Pislaru, Crinela (2008) Simulation of the structural elements of a three axis VMC for machine tool error compensation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 23-27. ISBN 978-1-86218-067-3
Pradhan, S., Lucas, Gary and Zhao, X. (2008) Measurement of reference velocity vector for four-sensor conductance probes using orthogonal, high speed cameras. In: 6th North American Conference on Multiphase Technology, 4th-6th June 2008, Banff, Canada. (Unpublished)
Pradhan, Suman, Lucas, Gary and Zhao, X. (2007) Measurement of Reference Bubble Velocity Vector for a Local 4 Sensor Probe Using Orthogonal High Speed Cameras. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.
Pradhan, Suman and Mishra, Rakesh (2012) Experimental verification of the four-sensor probe model for flow diagnosis in air water flow in vertical pipe. Journal of Physics: Conference Series, 364. 012073. ISSN 1742-6596
Pradhan, Suman and Mishra, Rakesh (2015) Measurement of properties of a dispersed phase in air-water multiphase flow using novel four-sensor probe and orthogonal high speed cameras. In: FLUVISU 2015, 16th-20th November, Pleumeur-Bodou/Lannion, France. (Unpublished)
Qi, Qufen, Blunt, Liam, Scott, Paul J. and Jiang, Xiang (2010) Modeling of the concepts in ISO standards for profile surface texture. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 172-176. ISBN 9781862180932
Qi, Qufen, Jiang, Xiang, Scott, Paul J. and Lu, Wenlong (2012) Model for a CAD-assisted designing process with focus on the definition of the surface texture specifications and quality. In: Proceedings of the 37th International MATADOR Conference. Springer, Manchester, UK, pp. 273-276. ISBN 978-1-4471-4479-3
Qi, Qufen, Jiang, Xiang, Scott, Paul J. and Lu, Wenlong (2013) Surface texture specification, the more complete the better? Procedia CIRP, 10. pp. 233-237. ISSN 2212-8271
Qi, Qunfen (2013) Bridging the knowledge gap between design, manufacture and measurement in the field of surface texture. Doctoral thesis, University of Huddersfield.
Qi, Qunfen, Jiang, Xiang and Scott, Paul J. (2012) Knowledge modeling for specifications and verification in areal surface texture. Precision Engineering, 36 (2). pp. 322-333. ISSN 0141-6359
Qi, Qunfen, Jiang, Xiangqian, Liu, Xiaojun and Scott, Paul J. (2010) An unambiguous expression method of the surface texture. Measurement, 43 (10). pp. 1398-1403. ISSN 0263-2241
Qi, Qunfen, Li, Tukun, Scott, Paul J. and Jiang, Xiang (2015) A correlational study of areal surface texture parameters on some typical machined surfaces. Procedia CIRP, 27. pp. 149-154. ISSN 2212-8271
Qin, G., Gu, Fengshou, Xu, Yuandong, Liu, Fulong and Ball, Andrew (2017) Bogie Speed Estimation and Signal Source Separation via Rail Vibration Analysis. In: COMADEM 2017: 30th International Congress & Exhibition on Condition Monitoring and Diagnostic Engineering Management, Monday 10th - Thursday 13th July 2017, University of Central Lancashire, Preston. (Unpublished)
Qin, Yongrui, Sheng, Quan Z., Wang, Hua and Falkner, Nickolas J. G. (2017) Organizing XML data in a wireless broadcast system by exploiting structural similarities. Wireless Personal Communications. ISSN 0929-6212
Qin, Yuchu, Lu, Wenlong, Qi, Qunfen, Liu, Xiaojun, Zhou, Liping and Li, Tukun (2015) Ontology-based semantic interpretation of cylindricity specification in the next-generation GPS. Procedia CIRP, 27. pp. 124-130. ISSN 2212-8271
Rabeyee, Khalid, Xu, Yuandong, Alabied, Samir, Gu, Fengshou and Ball, Andrew (2019) Extraction of Information from Vibration Data using Double Density Discrete Wavelet Analysis for Condition Monitoring. In: Sixteenth International Conference on Condition Monitoring and Asset Management, 25-27 June 2019, The Principal Grand Central Hotel, Glasgow, UK. (Unpublished)
Rabeyee, Khalid, Xu, Yuandong, Alashter, Aisha, Gu, Fengshou and Ball, Andrew (2019) A Componential Coding Neural Network based Signal Modelling for Condition Monitoring. In: COMADEM 2019, 3-5 September 2019, University of Huddersfield. (Unpublished)
Racasan, Radu, Bills, Paul J., Blunt, Liam and Xiao, Shaojun (2013) Measurement of material loss. In: Are Modular Hip Junctions An Issue?, 29th April 2013, The Royal Society of Medicine, London. (Submitted)
Radhi, H.E. and Barrans, Simon (2012) Comparison between multiobjective optimization algorithms. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 129-135. ISBN 978-1-86218-106-9
Radhi, H.E. and Barrans, Simon (2012) Comparison between multiobjective optimization algorithms. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9
Radhi, H.E. and Barrans, Simon (2013) Diversity metric assessment for multi-objective optimization. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 171-175. ISBN 9781862181212
Raharjo, Parno (2013) An Investigation of Surface Vibration, Airbourne Sound and Acoustic Emission Characteristics of a Journal Bearing for Early Fault Detection and Diagnosis. Doctoral thesis, University of Huddersfield.
Ramduny-Ellis, Devina, Dix, Alan and Gill, Steve (2012) Preface: Proceedings of the Fourth International Workshop on Physicality. In: Proceedings of the Fourth International Workshop on Physicality. University of Huddersfield, Huddersfield, iv. ISBN 9781-86218-110-6
Ramduny-Ellis, Devina, Dix, Alan and Gill, Steve (2012) Proceedings of the Fourth International Workshop on Physicality. University of Huddersfield, Huddersfield. ISBN 9781-86218-110-6
Ray, Indrani (2015) Analysis of Offset Pulse Position Modulation. Doctoral thesis, University of Huddersfield.
Redmore, Nicola (2011) Woven Textile Design. In: Textile design: principles, advances and applications. Woodhead Publishing Ltd, Oxford, UK, pp. 31-54. ISBN 9781845696467
Rehab, Ibrahim, Tian, Xiange, Gu, Fengshou and Ball, Andrew (2013) Roller element bearing fault detection and diagnosis based on an optimised envelope analysis. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 176-181. ISBN 9781862181212
Rehab, Ibrahim, Tian, Xiange, Gu, Fengshou and Ball, Andrew (2014) The fault detection and severity diagnosis of rolling element bearings using modulation signal bispectrum. In: Eleventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 10th - 12th June 2014, Manchester, UK.
Rehab, Ibrahim, Tian, Xiange, Zhang, Ruiliang, Gu, Fengshou and Ball, Andrew (2016) A Study Of The Diagnostic Amplitude Of Rolling Bearing Under Increasing Radial Clearance Using Modulation Signal Bispectrum. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.
Rehab, Ibrahim, Tiana, Xiange, Hu, Niaoqing, Yan, Tianxiao, Zhang, Ruiliang, Gu, Fengshou and Ball, Andrew (2016) A study of two bispectral features from envelope signals for bearing fault diagnosis. In: IncoME 2016, 30th - 31st August 2016, Manchester Conference Centre, Manchester.
Rehab, Ibrahim A. M. (2016) The Optimization of Vibration Data Analysis for the Detection and Diagnosis of Incipient Faults in Roller Bearings. Doctoral thesis, University of Huddersfield.
Ren, Hongyu, Jiang, Xiang and Gao, F. (2013) Simulation of Tri-sensor Deflectometry for Freeform and Structured Specular Surfaces. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 236. ISBN 9781862181212
Richardson, Nona Elizabeth (2008) An operator induction tool supporting knowledge engineering in planning. Doctoral thesis, University of Huddersfield.
Robotham, Thomas (2016) The effects of a vertical reflection on the relationship between listener preference and timbral and spatial attributes. Masters thesis, University of Huddersfield.
Romero, Julián (2009) Novel Objective and Subjective Metrics For The Assessment Of Sound Quality In Critical Listening Rooms. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Rooke, John, Koskela, Lauri, Siriwardena, Mohan, Ruikar, Kirti, Kagioglou, Mike, Sexton, Martin, McDermott, P. and Aouad, Ghassan (2006) Researching decision support: What do we need to know? In: Symposium on Sustainability and Value Through Construction Procurement, 29th November - 2nd December 2006, Digital World Centre, Salford, UK.. (Unpublished)
Rosen, B.G. and Blunt, Liam (2007) Adaptive evaluation of a time and information efficient surface sampling. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK. (Unpublished)
Rowe, W. Brian, Xu, S.X., Chong, F.S. and Weston, William (1982) Hybrid journal bearings with particular reference to hole-entry configurations. Tribology International, 15 (6). pp. 339-348. ISSN 0301-679X
Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2007) Adaptive Control of Milling Forces under Fractional Order Holds. In: Innovative Algorithms and Techniques in Automation, Industrial Electronics and Telecommunications. Springer, London, UK, pp. 257-261. ISBN 978-1-4020-6265-0
Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2006) Discrete-time Model Reference Control of Milling Forces under Fractional Order Holds. Part I: Known Plant. In: IEEE Conference on Emerging Technologies and Factory Automation, 2006. ETFA '06, 20-22 September 2006, Prague, Czech Republic.
Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2006) Discrete-time Model Reference Control of Milling Forces under Fractional Order Holds. Part II: Extensions to Adaptive Control. In: IEEE Conference on Emerging Technologies and Factory Automation, 2006. ETFA '06, 20-22 September 2006, Prague, Czech Republic.
Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2007) Discrete-time model reference control schemes of milling forces using fractional order holds. In: Proceedings of Industrial Electronics Society, 2007. IECON 2007. 33rd Annual Conference of the IEEE. IEEE, Taipei, Taiwan, pp. 798-803. ISBN 1-4244-0783-4
Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2005) An Expert System for Mill Cutter and Cutting Parameters Selection. In: Advances in Computer, Information, System Sciences and Engineering. Proceedings of IETA 2005, TeNe 2005 and EIAE 2005 (XVI). Springer, London, UK. ISBN 978-1-4020-5261-3
Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2007) Intelligent adaptive control of forces in milling processes. In: 15th IEEE Mediterranean Conference on Control and Automation, 27th-29th June 2007, Athens, Greece.
Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2007) Optimization rules for mill cutter and cutting parameters selection incorporating a control algorithm. In: Proceedings of Emerging Technologies and Factory Automation,. ETFA 2007 . IEEE, Patras, Greece, pp. 1421-1424.
Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2006) Some aspects about Milling: Expert System for cutting parameters selection and Control Designs. In: Advanced Technologies: Research, Development and Application. ARS publishers, Germany. ISBN 9783866111974
Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2008) An expert mill cutter and cutting parameters selection system incorporating a control strategy. In: Proceedings of the 17th IFAC World Congress, 2008. International Federation of Automatic Control IFAC, COEX, South Korea, pp. 8362-8367. ISBN 978-3-902661-00-5
Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2005) An expert mill cutter selection system. In: 10th IEEE International Conference on Emerging Technologies and Factory Automation, 19-22 September 2005, Catania, Italy.
Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2008) A procedure to obtain mill cutter and cutting parameters using parameter optimization under constraints and expert rules. In: IEEE International Conference on Control Applications, 2008. CCA 2008, 3-5 September 2008, San Antonio, Texas.
Rubio Rodriguez, Luis, De la Sen Parte, Manuel, Longstaff, Andrew P. and Fletcher, Simon (2013) Model-based Expert System to Automatically Adapt Milling Forces in Pareto Optimal Multi-Objective Working Points. Expert Systems With Applications, 40 (6). pp. 2312-2322. ISSN 0957-4174
Sacks, Rafael, Kedar, Amir, Borrmann, Andre and Ma, Ling (2016) SeeBridge Information Delivery Manual (IDM) for Next Generation Bridge Inspection. In: 2016 Proceedings of the 33rd ISARC. ISARC, pp. 826-834.
Sadeghzadeh, RamezanAli Ali, Glover, Ian and McEwan, N.J. (1993) Short-term characterisation of hydrometeor scattering channel. In: Antennas and Propagation 1993,8th: International Conference Proceedings. IEEE, pp. 400-405. ISBN 9780852965726
Saeed, Bakhtiar I. and Mehrdadi, Bruce (2010) Intelligent Wireless Sensor Network. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 193. ISBN 9781862180932
Sahno, Jevgeni, Shevtshenko, Eduard, Karaulova, Tatjana and Tahera, Khadija (2015) Framework for continuous improvement of production processes. Engineering Economics, 26 (2). pp. 169-180. ISSN 2029-5839
Sajedeh, Mollasalehi, Fleming, Andrew, Talebi, Saeed and Underwood, Jason (2016) Development of an Experimental Waste Framework Based on Bim/Lean Concept in Construction Design. In: 24th Annual Conference of the International Group for Lean Construction, 18th - 24th July 2016, Boston, USA.
Sakalasuriya, Maheshika Mennike (2020) A Framework to Analyse the Consequences of Post Conflict Reconstruction Intervention; The Case of Road Infrastructure in Sri Lanka. Doctoral thesis, University of Huddersfield.
Salahat, Mohammed Hasan (2016) Information Systems Development through an Integrated Framework. Doctoral thesis, University of Huddersfield.
Saleh, Ahmed (2015) Enhancement of The IEEE 802.15.4 Standard By Energy Efficient Cluster Scheduling. Doctoral thesis, University of Huddersfield.
Sambo, Bello (2019) Incorporating automated rail fatigue damage detection algorithms with crack growth modelling. Doctoral thesis, University of Huddersfield.
Sambo, Bello, Bevan, Adam and Pislaru, Crinela (2016) A novel application of image processing for the detection of rail surface RCF damage and incorporation in a crack growth model. In: International Conference on Railway Engineering 2016 (ICRE), 12th - 13th May 2016, Brussels, Belgium.
Sarmiento-Carnevali, M.L., Bemment, S.D., Harrison, T.J., Ward, C.P., Bezin, Yann, Neves, Sérgio, Kostovasilis, Dimitrios and Sichani, Matin Sh. (2017) Repoint track switch wheel-rail mechanical interface analysis. In: 25th International Symposium on Dynamics of Vehicles on Roads and Tracks, 14-18 August 2017, Central Queensland University, Rockhampton.
Sasi, Ahmed Y. Ben, Gu, Fengshou, Li, Yuhua and Ball, Andrew (2006) A validated model for the prediction of rotor bar failure in squirrel-cage motors using instantaneous angular speed. Mechanical Systems and Signal Processing, 20 (7). pp. 1572-1589. ISSN 08883270
Sasloglou, K., Glover, Ian, Dutta, P., Atkinson, R., Andonovic, I. and Whyte, G. (2009) A channel model for wireless sensor networks in gas turbine engines. In: 2009 Loughborough Antennas & Propagation Conference. IEEE, pp. 761-764. ISBN 9781424427208
Sasloglou, Konstantinos, Darbari, Faisal, Glover, Ian, Andonovic, Ivan and Stewart, Robert W. (2008) Some preliminary short-range transmission loss measurements for wireless sensors deployed on indoor walls. In: 2008 11th IEEE Singapore International Conference on Communication Systems. IEEE, pp. 129-132. ISBN 9781424424238
Sasloglou, Konstantinos, Glover, Ian, Dutta, Partha, Atkinson, Robert, Andonovic, Ivan and Whyte, Griogair (2009) Empirical modelling and simulation of transmission loss between wireless sensor nodes in gas turbine engines. In: 2009 7th International Conference on Information, Communications and Signal Processing (ICICS). IEEE, pp. 1-5. ISBN 9781424446568
Sasloglou, Konstantinos, Glover, Ian, Goh, Hock Guan, Kwong, Kae Hsiang, Gilroy, Michael P., Tachtatzis, Christos, Michie, Craig and Andonovic, Ivan (2009) Antenna and Base-Station Diversity for WSN Livestock Monitoring. Wireless Sensor Network, 01 (05). pp. 383-396. ISSN 1945-3078
Savage, Christopher J., Jenkins, Andrew Kevin and Leach, David Z. (2017) Mega transport and logistics infrastructure projects in developed and developing countries: The ethics of investment and the cost of failure. In: Pan-Pacific Conference XXXIV, May 29 - 31, 2017, Lima, Peru.
Scholes, Susan C., Colledge, Coral J., Naylor, Andrew, Mahdi, Mohammed H., Smith, Alan M. and Joyce, Thomas (2016) Potential Synthetic Biolubricant as an Alternative to Bovine Serum. Lubricants, 4 (4). p. 38. ISSN 2075-4442
Scott, Paul J. (2007) Feature parameters. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.
Scott, Paul J. (2009) Feature parameters. Wear, 266 (5-6). pp. 548-551. ISSN 0043-1648
Scott, Paul J. (2004) Pattern analysis and metrology: the extraction of stable features from observable measurements. Proceedings of the Royal Society, A, 460. pp. 2845-2864. ISSN 1364-5021
Scott, Paul J. (2003) Recent developments in the measurement of aspheric surfaces by contact stylus instrumentation. Proceedings of SPIE, 4927. pp. 199-207. ISSN 0277-786X
Scott, Paul J. (2001) An algorithm to extract critical points from lattice height data. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 1889-1897. ISSN 0890-6955
Scott, Paul J. (2006) The case of surface texture parameter RSm. Measurement Science and Technology, 17 (3). pp. 559-564. ISSN 09570233
Senaratne, S., Kagioglou, Mike, Amaratunga, Dilanthi, Baldry, David, Aouad, Ghassan and Bowden, A (2005) Research knowledge transfer into teaching in the built environment. Engineering, Construction and Architectural Management, 12 (6). pp. 587-600. ISSN 0969-9988
Sendanayake Achchige, Isuru (2018) Novel Geometric Modelling and Aerodynamic Characterisation Methodology for Truck-Trailer Vehicles. Doctoral thesis, School of Computing and Engineering.
Senin, N., Blunt, Liam and Tolley, M. (2012) Dimensional metrology of micro parts by optical three-dimensional profilometry and areal surface topography analysis. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (11). pp. 1819-1832. ISSN 0954-4054
Seviour, Rebecca and Albright, Simon (2016) Radioisotopes Produced by Neutron Irradiation of Food. Applied Radiation and Isotopes, 110. pp. 224-229. ISSN 0969-8043
Shaeboub, Abdulkarim (2018) The Monitoring of Induction Machines Using Electrical Signals from the Variable Speed Drive. Doctoral thesis, University of Huddersfield.
Shaeboub, Abdulkarim, Lane, Mark, Haba, Usama, Gu, Fengshou and Ball, Andrew (2016) Detection and Diagnosis of Compound Faults in Induction Motors Using Electric Signals from Variable Speed Drives. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328
Shagluf, Abubaker, Longstaff, Andrew P., Fletcher, Simon, Denton, Paul and Myers, Alan (2013) The importance of assessing downtime cost related factors towards an optimised machine tool calibration schedule. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 182-187. ISBN 9781862181212
Shah, Mohammad Munshi Shahin (2014) Knowledge engineering techniques for automated planning. Doctoral thesis, University of Huddersfield.
Shan, Q, Bhatti, S, Glover, Ian, Atkinson, R and Rutherford, R (2009) Detection of super-high-frequency partial discharge by using neural networks. Insight, 51 (8). pp. 442-447. ISSN 1354-2575
Shan, Qingshan, Bhatti, S. A., Glover, Ian, Atkinson, Robert C., Moore, Philip J., Portugues, I.E. and Rutherford, Richard (2009) Noise amplitude distribution of impulsive noise from measurements in a power substation. In: 2009 44th International Universities Power Engineering Conference (UPEC 2009). IEEE, pp. 1-5. ISBN 9781424468232
Shan, Qingshan, Glover, Ian, Atkinson, R. C., Bhatti, S. A., Portugues, I. E., Moore, P. J., Rutherford, R., de Fátima Queiroz Vieira, M., Lima, A. M. N. and de Souza, B. A. (2011) Estimation of Impulsive Noise in an Electricity Substation. IEEE Transactions on Electromagnetic Compatibility, 53 (3). pp. 653-663. ISSN 0018-9375
Shan, Qingshan, Glover, Ian, Moore, P. J., Portugues, I. E., Watson, R. J. and Rutherford, R. (2007) Performance of Zigbee in Electricity Supply Substations. In: 2007 International Conference on Wireless Communications, Networking and Mobile Computing. IEEE, pp. 3866-3869. ISBN 9781424413119
Shan, Qingshan, Glover, Ian, Moore, P. J., Portugues, I. E., Watson, R. J., Rutherford, R., Atkinson, R. and Bhatti, Shahzad (2008) Laboratory Assessment of WLAN Performance Degradation in the Presence of Impulsive Noise. In: 2008 International Wireless Communications and Mobile Computing Conference. IEEE, pp. 859-863. ISBN 9781424422012
Shebani, Amer and Iwnicki, Simon (2018) Prediction of wheel and rail wear under different contact conditions using artificial neural networks. Wear. ISSN 0043-1648
Shebob, A., Dawood, N., Shah, Karen and Xu, Qiang (2012) Comparative study of delay factors in Libyan and the UK construction industry. Engineering, Construction and Architectural Management, 19 (6). pp. 688-712. ISSN 0969-9988
Shebob, A., Dawood, N. and Xu, Qiang (2011) Analysing construction delay factors: A case study of building construction project in Libya. In: Proceedings 27th Annual ARCOM Conference. ARCOM, pp. 1005-1012. ISBN 9780955239052
Shi, John Z., Gu, Fengshou, Goulding, Peter and Ball, Andrew (2007) Integration of multiple platforms for real-time remote model-based condition monitoring. Computers in Industry, 58 (6). pp. 531-538. ISSN 01663615
Shi, Zhanqun, Gu, Fengshou, Lennox, Barry and Ball, Andrew (2005) The development of an adaptive threshold for model-based fault detection of a nonlinear electro-hydraulic system. Control Engineering Practice, 13 (11). pp. 1357-1367. ISSN 0967-0661
Shi, Zhanqun, Higson, Andrew, Zheng, Lin, Gu, Fengshou and Ball, Andrew (2006) Automatic Fault Detection Using a Model-Based Approach in the Frequency Domain. In: ASME 8th Biennial Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Torino, Italy. (Unpublished)
Shih, Jou-Yi, Kostovasilis, Dimitrios, Bezin, Yann and Thompson, D.J. (2017) Modelling options for ballast track dynamics. In: 24th international congress on sound and vibration, 23-27th July 2017, London. (Unpublished)
Shih, Jou-Yi, Thompson, D. J. and Zervos, A. (2016) The effect of boundary conditions, model size and damping models in the finite element modelling of a moving load on a track/ground system. Soil Dynamics and Earthquake Engineering, 89. pp. 12-27. ISSN 0267-7261
Shih, Jou-Yi, Thompson, D.J. and Zervos, A. (2016) Modelling of ground-borne vibration when the train speed approaches the critical speed. In: 12th International Workshop on Railway Noise, IWRN12, 12th-16th September 2016, Terrigal, Australia.
Shih, Jou-Yi, Thompson, D.J. and Zervos, A. (2016) Modelling scheme for railway vehicle/track/ground dynamic interaction in the time domain. In: Proceeding of the 24th UK conference of the Association for Computational Mechanics in Engineering, 31st March-1st April 2016, Cardiff, Wales.
Shih, Jou-Yi, Thompson, David and Zervos, Antonis (2014) Assessment of track-ground coupled vibration induced by high-speed trains. In: The 21st International Congress on Sound and Vibration, 13-17 July, 2014, Beijing, China.
Shih, Jou-Yi, Thompson, David J. and Zervos, Antonis (2017) The influence of soil nonlinear properties on the track/ground vibration induced by trains running on soft ground. Transportation Geotechnics, 11. pp. 1-16. ISSN 2214-3912
Shobayo, Laolu Obafemi (2020) Study of Enhanced Frequency Support for the UK Electrical Network. Masters thesis, University of Huddersfield.
Sibley, Martin J.N. (1990) Optical Communications. McGraw Hill. ISBN 9780070572164
Sibley, Martin J.N. (2005) Performance analysis of a dicode PPM system, operating over plastic optical fibre, using maximum likelihood sequence detection. IEE Proceedings: Optoelectronics, 152 (6). pp. 337-343. ISSN 1350-2433
Simon, Parkinson, Andrew, Longstaff, Andrew, Crampton and Peter, Gregory (2014) Automated Planning for Multi-Objective Machine Tool Calibration: Optimising Makespan and Measurement Uncertainty. In: Proceedings of the Twenty-Fourth International Conference on Automated Planning and Scheduling. ICAPS 2014 . Association for the Advancement of Artificial Intelligence AAAI, Portsmouth, USA, pp. 421-429.
Sinclair, Neil, Harle, David, Glover, Ian, Irvine, James and Atkinson, Robert (2013) Parameter Optimization for LTE Handover using an Advanced SOM Algorithm. In: IEEE Vehicular Technology Conference, 2-5th June 2013, Dresden, Germany. (Unpublished)
Singh, D., Fieldhouse, John D., Jain, A.K., Singh, Nishan, Tyagi, M.R. and Singal, S.K. (2011) Investigating the Effect of Engine Operating Variables and Engine Lubricant Viscosity on Engine Friction- A DOE Approach. In: 16th Asia Pacific Automotive Engineering Conference (APAC), 6th - 8th October 2011, Chennai, India. (Unpublished)
Smith, Alan M., Fleming, Leigh, Wudebwe, Uchena, Bowen, James and Grover, Liam M (2014) Development of a synovial fluid analogue with bio-relevant rheology for wear testing of orthopaedic implants. Journal of the Mechanical Behavior of Biomedical Materials, 32. pp. 177-184. ISSN 17516161
Smith, Alan M., Hunt, Nicola C, Shelton, Richard M, Birdi, Gurpreet and Grover, Liam Michael (2012) Alginate hydrogel has a negative impact on in vitro collagen 1 deposition by fibroblasts. Biomacromolecules, 13 (2). pp. 4032-4038. ISSN 1525-7797
Smith, Ann and Gu, Fengshou (2013) Distributional considerations in inference based condition monitoring stages: detection, diagnosis and prognosis. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 238. ISBN 9781862181212
Smithson, A. and Glover, Ian (2006) Prediction of Attenuation and Delay-Spread for Systems with Outdoor Basestations and Indoor Users. In: 2006 European Conference on Wireless Technologies. IEEE, pp. 265-268. ISBN 9782960055153
Smithson, A.G. and Glover, Ian (2003) High performance digital radio channel sounder for use at 2 and 5 GHZ. In: Twelfth International Conference on Antennas and Propagation. IEEE, p. 804. ISBN 9780852967522
Sochor, Jana and Nikitas, Alexandros (2016) Vulnerable Users’ Perceptions of Transport Technologies. Proceedings of the Institution of Civil Engineers. Urban Design and Planning, 169 (3). pp. 154-162. ISSN 1755-0793
Solano-Alvarez, Wilberth, Bevan, Adam, Jaiswal, Jay and Bhadeshia, Harry (2016) Soft novel form of white-etching matter and ductile failure of carbide-free bainitic steels under rolling contact. Acta Materialia, 121. pp. 215-226. ISSN 1359-6454
Solano-Alvarez, Wilberth, Peet, M, Pickering, E, Jaiswal, Jay, Bevan, Adam and Bhadeshia, Harry (2017) Synchrotron and neural network analysis of the influence of composition and heat treatment on the rolling contact fatigue of hypereutectoid pearlitic steels. Materials Science and Engineering: A: Structural Materials: Properties, Microstructure and Processing, 707. pp. 259-269. ISSN 0921-5093
Somaraki, V. and McCluskey, T.L. (2012) A robust validation framework for trend mining : a study in diabetic retinopathy. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 63-68. ISBN 978-1-86218-106-9
Sophian, A., Tian, Gui Yun and Zairi, S. (2006) Pulsed magnetic flux leakage probe for crack detection and characterisation. Sensors and Actuators A Physical, 125 (2). pp. 186-191. ISSN 0924-4247
Sperring, T. and Pislaru, Crinela (2006) COMONET – the DTI knowledge transfer network for condition monitoring sensors. In: The European Conference in Lubrication Management and Technology LUBMAT 2006, 14-16 June 2006, Preston, UK.
Sridarran, Pournima, Keraminiyage, Kaushal and Herszon, Leon (2017) Improving the cost estimates of complex projects in the project based industries. Built Environment Project and Asset Management, 7 (2). pp. 173-184. ISSN 2044-124X
Stepan, G. and Kollar, László E. (2000) Balancing with reflex delay. Mathematical and Computer Modelling, 31 (4-5). pp. 199-205. ISSN 0895-7177
Stroe, Octavian (2017) Valve vs. solid-state microphone preamplifier: a comparative study. Fields: journal of Huddersfield student research, 3 (1). ISSN 2057-0163
Stroud, K.S. and Booth, Dexter J. (2007) Engineering Mathematics. Industrial Press, New York. ISBN 9780831133276
Stroud, Kenneth Arthur and Booth, Dexter J. (2001) Engineering mathematics (5th edition). Palgrave Macmillan. ISBN 9780333919392
Sun, Quanbin and Wu, Song (2014) Computer Simulation of Leadership, Consensus Decision Making and Collective Behaviour in Humans. PLoS ONE, 9 (1). e80680. ISSN 1932-6203
Swinton, James (2018) DEVELOPMENT OF A NOVEL HIGH TEMPERATURE FAN HUB DESIGN. Masters thesis, University of Huddersfield.
Swuste, Paul, Groeneweg, Jop, Van Gulijk, Coen, Zwaard, Walter and Lemkowitz, Saul (2017) Safety management systems from Three Mile Island to Piper Alpha, a review in English and Dutch literature for the period 1979 to 1988. Safety Science. ISSN 0925-7535
Swuste, Paul, Van Gulijk, Coen, Zwaard, Walter, Lemkowitz, Saul, Oostendorp, Yvette and Groeneweg, Jop (2016) Developments in the safety science domain, in the fields of general and safety management between 1970 and 1979, the year of the near disaster on Three Mile Island, a literature review. Safety Science, 86. pp. 10-26. ISSN 0925-7535
Sztendel, S. and Pislaru, Crinela (2009) Developing mechatronic models of modern CNC machine tools for real-time implementation. In: Lamdamap 9th International Conference, 30th June – 2nd July 2009, Brunel University. (Unpublished)
Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Ford, Derek G., Myers, Alan and Poxton, Anthony (2010) Linking fed drive model with structural models for CNC machine tools. In: University of Huddersfield Annual Research Festival School of Computing and Engineering 12th March 2010, Friday 12th March 2010, University of Huddersfield. (Unpublished)
Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Myers, Alan, Fletcher, Simon and Ford, Derek G. (2012) Analysis of complex interactions between mechanical elements using ansys and simulink. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 136-141. ISBN 978-1-86218-106-9
Sztendel, Sebastian (2016) Model Referenced Condition Monitoring of High Performance CNC Machine Tools. Doctoral thesis, University of Huddersfield.
Taha, Khaled (2018) THE USE OF TUNED FRONT END OPTICAL RECEIVER AND PULSE POSITION MODULATION. Doctoral thesis, University of Huddersfield.
Tahera, K. (2009) Development of a knowledge based tool to assist spacecraft attitude control subsystem design. Masters thesis, Cranfield University, UK.
Tahera, Khadija, Earl, C.F. and Eckert, C.M. (2012) The role of testing in the engineering product development process. In: Tools and Methods of Competitive Engineering. TMCE 2012 . Delft University of Technology, Karlsruhe, Germany, pp. 894-904.
Tahera, Khadija, Earl, Chris and Claudia, Eckert (2014) Integrating virtual and physical testing to accelerate the engineering product development process. International Journal of Information Technology and Management, 13 (2). pp. 154-175. ISSN 1461-4111
Tahera, Khadija, Earl, Chris F. and Eckert, Claudia (2017) A method for improving overlapping of testing and design. IEEE Transactions on Engineering Management, 64 (2). pp. 179-192. ISSN 0018-9391
Tahera, Khadija, Earl, Chris F. and Eckert, Claudia M. (2013) Improving overlapping between testing and design in engineering product development processes. In: ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. 25th International Conference on Design Theory and Methodology; ASME 2013 Power Transmission and Gearing Conference, 5 . American Society of Mechanical Engineers, Portland, Oregon, USA, V005T06A038. ISBN 978-0-7918-5592-8
Tahera, Khadija, Earl, Chris F. and Eckert, Claudia M. (2012) Integrating physical and virtual testing to improve confidence in product design. In: 2nd International Conference on Modelling and Management of Engineering Processes, 29th-30th November 2012, Cambridge, UK.
Tahera, Khadija, Eckert, Claudia and Earl, Chris (2015) Highlighting the importance of testing in the product development process. In: Proceedings of the 20th International Conference on Engineering Design (ICED 15). Design Society, 021-030. ISBN 9781904670698
Tahera, Khadija, Eckert, Claudia M. and Earl, Chris F. (2013) Optimizing Overlap between Testing and Design in Engineering Product Development Processes. In: Smart Product Engineering: Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013. Lecture Notes in Production Engineering . Springer-Verlag GmbH, Heidelberg, Bochum, Germany, pp. 201-210. ISBN 978-3-642-30817-8
Talbot, Chris J. and Fieldhouse, John D. (2002) Graphic representation of disc brakes generating noise using data from laser holography. In: Vehicle Noise and Vibration. John Wiley and Sons, pp. 45-58. ISBN 9781860583865
Talbot, Chris J. and Fieldhouse, John D. (2002) Investigations of In-Plane Disc Vibration Using Laser Holography. In: 20th Annual Brake Colloquium And Exhibition, October 2002, Phoenix, AZ, USA.
Talebi, Saeed (2019) Improvement of Dimensional Tolerance Management in Construction. Doctoral thesis, University of Huddersfield.
Talebi, Saeed, Koskela, Lauri, Shelbourn, Mark and Tzortzopoulos, Patricia (2016) Critical Review of Tolerance Management in Construction. In: 24th Annual Conference of the International Group for Lean Construction, 18th - 24th July 2016, Boston, USA.
Tan, Feng (2015) Development of Subroutine Library and Data Transfer Interface for High Temperature Structural Integrity-Creep. Doctoral thesis, University of Huddersfield.
Tang, Dawei (2016) Investigation of Line-Scan Dispersive Interferometry for In-Line Surface Metrology. Doctoral thesis, University of Huddersfield.
Tang, Dawei, Gao, F. and Jiang, Xiang (2013) Spectral Domain Low- Coherence Interferometry for On-line Surface Inspection. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 194-199. ISBN 9781862181212
Tang, Dawei, Gao, F. and Jiang, Xiang (2014) White Light Channeled Spectrum Interferometry for the On-line Surface Inspection. In: The 3rd Annual EPSRC Manufacturing the Future Conference, 23 Sep-24 Sep 2014, Glasgow Science Centre, Glasgow, UK. (Unpublished)
Tang, Dawei, Gao, Feng and Jiang, Xiangqian (2016) Implementation of line-scan dispersive interferometry for defect detection. In: EUSPEN 16th International Conference & Exhibition, 30th May - 3rd June 2016, Nottingham, UK.
Tang, Dawei, Gao, Feng and Jiang, Xiangqian (2014) On-line surface inspection using cylindrical lens-based spectral domain low-coherence interferometry. Applied Optics, 53 (24). pp. 5510-5516. ISSN 1559-128X
Tang, Gongyue, Yan, Deguang, Yang, Chun, Gong, Haiqing, Chai, John and Lam, Yee Cheong (2006) Assessment of Joule heating and its effects on electroosmotic flow and electrophoretic transport of solutes in microfluidic channels. ELECTROPHORESIS, 27 (3). pp. 628-639. ISSN 0173-0835
Tang, Xiaoli, Xu, Yuandong, Gu, Fengshou and Wang, Guangbin (2017) Fault Detection of Rolling Element Bearings Using the Frequency Shift and Envelope based Compressive Sensing. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601
Tansley, Dean, Fletcher, Simon and Longstaff, Andrew P. (2013) Smart sensor for surface temperature measurement on manufacturing machines. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 55-60. ISBN 9781862181212
Tao, Liang, Gao, Jingwei, Wang, Ruichen and Dong, Jianguo (2017) Review on Wave Energy Technologies and Power Equipment for Tropical Reefs. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601
Taylor, Andrew and Unver, Ertu (2015) 3D Printing our future: Now. In: 3M: IMI Workshop In collaboration With EOS, Renishaw & HK 3D Printing, 17th March 2015, 3M Buckley Innovation Centre. (Unpublished)
Taylor, Andrew, Unver, Ertu and Ball, Andrew (2016) Interdisciplinary 3d Mobile Scanning Technology Case Studies: Canvasman, Faro, Artec & Structure Sensor For Ipad. In: School of Art, Design & Architecture Research Conference 2016, 14th January 2016, University of Huddersfield.
Tecelli Opoz, Tahsin and Chen, Xun (2009) Robotic Grinding and Polishing Process Technology. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Tesfa, Belachew (2013) Benefit of Grand Ethiopian Renaissance Dam Project (GERDP) for Sudan and Egypt. Discussion Paper. EIPSA Communicating Article: Energy, Water, Environment & Economic, Online.
Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2014) Emission Characteristics of a CI Engine Running with a Range of Biodiesel Feedstocks. Energies, 7 (1). pp. 334-350. ISSN ISSN 1996-1073
Tezel, Algan and Aziz, Zeeshan (2017) From Conventional to IT Based Visual Management: A Conceptual Discussion for Lean Construction. Journal of Information Technology in Construction (ITCon), 22. pp. 220-246. ISSN 1874-4753
Tezel, Algan and Aziz, Zeeshan (2017) Visual Management in Highways Construction and Maintenance in England. Engineering, Construction and Architectural Management, 24 (3). pp. 486-513. ISSN 0969-9988
Tezel, Algan and Aziz, Zeeshan (2015) Visual controls at the workface of road construction and maintenance : Preliminary report. Technical Report. University of Salford, UK.
Tezel, Algan and Aziz, Zeeshan (2016) Visual management/visual controls implementation pilot : 5S in Highways Construction and Maintenance. Project Report. University of Salford, UK.
Tezel, Algan, Aziz, Zeeshan and Jiang, Chuxiong (2016) BIM based Design Management of a Building Project Collaboratively Designed with a Foreign Design Firm in China: A Case Study. International Journal of 3-D Information Modeling, 5 (2). pp. 16-38. ISSN 2156-1710
Tezel, Algan, Aziz, Zeeshan, Koskela, Lauri and Tzortzopoulos, Patricia (2016) Benefits of Visual Management in the Transportation Sector. In: 24th Annual Conference of the International Group for Lean Construction, 18th - 24th July 2016, Boston, USA.
Tezel, Algan, Aziz, Zeeshan, Koskela, Lauri and Tzortzopoulos, Patricia (2016) Visual Management Condition in Highways Construction Projects in England. In: 24th Annual Conference of the International Group for Lean Construction, 18th - 24th July 2016, Boston, USA.
Tezel, Algan, Gosling, Jonathan, Kumar, Maneesh and Koskela, Lauri (2017) Transition from Engineer-to-Order (EtO) to Assembly-to-Order (AtO) in Civil Infrastructure Projects: An Exploration of the Highways Supply Chain. In: EurOMA 2017, 1st-5th July, Heriot-Watt University, Edinburgh, Scotland. (Unpublished)
Tezel, Algan, Koskela, Lauri and Aziz, Zeeshan (2017) Lean Construction in Small-Medium Sized Enterprises (SMEs): An Exploration of the Highways Supply Chain. In: 25th Annual Conference of the International Group for Lean Construction, 9th-12th July 2017, Heraklion, Greece.
Tezel, Algan, Koskela, Lauri, Gosling, Jonathan and Kumar, Maneesh (2017) From Construction to Production: Enablers, Barriers and Opportunities for the Highways Supply Chain. Technical Report. University of Huddersfield.
Tezel, Algan, Koskela, Lauri and Tzortzopoulos, Patricia (2017) Continuous Improvement Cells in the Highways Supply Chain: Benefits and Challenges. Project Report. University of Huddersfield.
Tezel, Algan, Koskela, Lauri and Tzortzopoulos, Patricia (2009) The Functions of Visual Management. In: International Research Symposium, 2009, Salford, UK.
Tezel, Algan, Koskela, Lauri and Tzortzopoulos, Patricia (2013) Visual Management in Industrial Construction: A Case Study. In: 21th Annual Conference of the International Group for Lean Construction, 31st July - 2nd August 2013, Fortaleza, Brazil.
Tezel, Algan, Koskela, Lauri and Tzortzopoulos, Patricia (2016) Visual Management in production management: a literature synthesis. Journal of Manufacturing Technology Management, 27 (6). pp. 766-799. ISSN 1741-038X
Tezel, Algan, Koskela, Lauri, Tzortzopoulos, Patricia, Formoso, Carlos and Alves, Thais (2015) Visual Management in Brazilian Construction Companies: Taxonomy and Guidelines for Implementation. Journal of Management in Engineering, 31 (6). ISSN 0742-597X
Tezel, Algan and Nielsen, Yasemin (2013) Lean construction conformance among construction contractors in Turkey. Journal of Management in Engineering, 29 (3). pp. 236-250. ISSN 0742-597X
Thompson, Martin, Hunt, Ben, Smith, Alan M. and Joyce, Thomas (2015) Wear Tests of a Potential Biolubricant for Orthopedic Biopolymers. Lubricants, 3 (2). pp. 80-90. ISSN 2075-4442
Tian, G.Y. and Gledhill, Duke (2006) Visualisation based feedback control for multiple sensor fusion. Proceedings of the conference on Information Visualization (IV06). pp. 553-556. ISSN 1550-6037
Tian, G.Y., Sophian, A., Taylor, D. and Rudlin, J. (2005) Multiple sensors on pulsed eddy-current detection for 3-D subsurface crack assessment. IEEE Sensors Journal, 5 (1). pp. 90-96. ISSN 1530-437X
Tian, G.Y., Sophian, A., Taylor, D. and Rudlin, J.R. (2005) Wavelet-based PCA defect classification for pulsed eddy current NDT. IEE Proceedings: Science Measurement and Technology, 152 (4). ISSN 1350-2344
Tian, G.Y. and Sophian, Ali (2004) Study of magnetic sensors for pulsed eddy current techniques. In: 16th WCNDT 2004 - World Conference on NDT, Aug 30th - Sep 3rd, 2004, Montreal, Canada.
Tian, Gui Yun, Lu, R.S. and Gledhill, Duke (2007) Surface measurement using active vision and light scattering. Optics and Lasers in Engineering, 45 (1). pp. 131-139. ISSN 01438166
Tian, Gui Yun and Sophian, Ali (2005) Defect classification using a new feature for pulsed eddy current sensors. NDT & E International, 38 (1). pp. 77-82. ISSN 0963-8695
Tian, Gui Yun, Zhao, Z. X. and Baines, R. W. (2000) A Fieldbus-based intelligent sensor. Mechatronics, 10 (8). pp. 835-849. ISSN 0957-4158
Ting, Teck Hui, Yap, Yit Fatt, Nguyen, Nam-Trung, Wong, Teck Neng, Chai, John and Yobas, Levent (2006) Thermally mediated breakup of drops in microchannels. Applied Physics Letters, 89 (23). p. 234101. ISSN 0003-6951
Tong, F., Atkinson, R.C., Glover, Ian, Pennock, S.R. and Shepherd, P.R. (2008) Effect of co-phasing diversity on CDMA downlink capacity. Electronics letters, 44 (13). pp. 786-788. ISSN 0013-5194
Tong, F., Glover, Ian, Pennock, S.R. and Shepherd, P.R. (2005) Co-phase transmission diversity for distributed antenna. In: 2005 IEEE Antennas and Propagation Society International Symposium. IEEE, pp. 60-63. ISBN 9780780388833
Tong, F., Glover, Ian, Pennock, S.R. and Shepherd, P.R. (2004) Impact of distributed antenna systems on inter-cell interference. In: Wireless Technologies 2004: Conference Proceedings. Horizon House, pp. 41-44. ISBN 9781580539913
Tong, F., Glover, Ian, Pennock, S.R. and Shepherd, P.R. (2004) Optimal transmission scheme for a distributed antenna in CDMA system. In: Fifth IEE International Conference on 3G Mobile Communication Technologies (3G 2004) The Premier Technical Conference for 3G and Beyond. IEEE, pp. 600-603. ISBN 9780863413889
Tong, Zhen, Luo, Xichun, Sun, Jining, Liang, Yingchun and Jiang, Xiangqian (2015) Investigation of a scale-up manufacturing approach for nanostructures by using a nanoscale multi-tip diamond tool. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768
Townsend, Andrew, Racasan, Radu, Bills, Paul J., Thompson, Adam, Senin, Nicola, Leach, Richard K. and Blunt, Liam (2017) Results from an interlaboratory comparison of areal surface texture parameter extraction from X-ray computed tomography of additively manufactured parts. In: euspen's 17th International Conference, 29 May - 2 June 2017, Hannover, Germany.
Towsyfyan, Hossein (2017) Investigation of the Nonlinear Tribological Behaviour of Mechanical Seals for Online Condition Monitoring. Doctoral thesis, University of Huddersfield.
Towsyfyan, Hossein, Gu, Fengshou and Ball, Andrew (2013) A review of mechanical seals tribology and condition monitoring. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 200-205. ISBN 9781862181212
Tygier, S., Appleby, R. B., Rafique, H., Barlow, Roger, Rowan, Scott and Molson, J. G. (2017) Recent Development and Results with the MERLIN Tracking Code. In: IPAC2017 : Proceedings of the 8th International Particle Accelerator Conference. JACoW, pp. 104-106. ISBN 9783954501823
Unar, M.H., Glover, Ian, Heaton, J.A.T., Williams, Chris and Cannon, Paul S. (2003) Wide-band mobile radio channel characterisation in UHF band for residential suburban areas. In: Twelfth International Conference on Antennas and Propagation (ICAP 2003). IEEE, pp. 262-265. ISBN 9780852967522
Unar, M.H., Vaccaro, G. and Glover, Ian (2007) Ray-Tracer for Outdoor Microcellular Propagation Modelling and Channel Characterisation. In: Second European Conference on Antennas and Propagation, 2007, EuCAP 2007. IEEE, pp. 1-7. ISBN 9780863418426
Upton, David, Saeed, Bahghtar, Mather, Peter, Lazaridis, Pavlos, Vieira, M F Q, Atkinson, Robert, Tachtatzis, Christos, Garcia, M. S., Judd, M and Glover, Ian (2018) Wireless Sensor Network for Radiometric Detection and Assessment of Partial Discharge in High-Voltage Equipment. Radio Science. ISSN 0048-6604
Van Gulijk, Coen, Hughes, Peter and Figueres-Esteban, Miguel (2016) The potential of ontology for safety and risk analysis. In: Risk, Reliability and Safety: Innovating Theory and Practice: Proceedings of ESREL 2016. CRC Press. ISBN 9781138029972
Vassiliadis, Savvas, Kallivretaki, Argyro, Domvoglou, Dimitra and Provatidis, Christofer (2011) Mechanical Analysis of Woven Fabrics:The State of the Art. In: Advances in Modern Woven Fabrics Technology. InTech, Rijeka, Croatia, pp. 41-64. ISBN 978-953-307-337-8
Wakefield, Jonathan P. and Dewey, Christopher (2015) Evaluation of an Algorithm for the Automatic Detection of Salient Frequencies in Individual tracks of Multi-track Musical Recording. In: 138th International AES Convention, 7th - 10th May 2015, Warsaw, Poland.
Wakefield, Jonathan P. and Dewey, Christopher (2015) An investigation into the efficacy of methods commonly employed by mix engineers to reduce frequency masking in the mixing of multitrack musical recordings. In: 138th International AES Convention, 7th - 10th May 2015, Warsaw, Poland.
Wakefield, Jonathan P., Dewey, Christopher and Gale, William (2017) LAMI: A gesturally controlled three-dimensional stage Leap (Motion-based) Audio Mixing Interface. In: Audio Engineering Society 142nd, May 20-23 2017, Berlin.
Walker, D.D., Hsing-Yu, Wu, Yu, G., Li, H., Zhang, Wang and Lu, Chunlian (2017) Insight into aspheric misfit with hard tools: mapping the island of low mid-spatial frequencies. Applied Optics, 56 (36). pp. 9925-9931. ISSN 1559-128X
Walker, David D. (2016) CNC Polishing and Metrology – from E-ELT Segments to Commercial Optics. In: Academic seminar by Prof David Walker: The Institute of Optics And Electronics, The chinese Academy of Sciences:, 6-8 June 2016, Chengdu, China. (Unpublished)
Walker, David D., Davies, Gary, Fox-Leonard, Tony, Gray, Caroline, Mitchell, John, Rees, Paul, Wu, Hsing Yu, Volkov, Andy and Yu, Guo Yu (2014) Advanced abrasive processes for manufacturing prototype mirror segments for the world’s largest telescope. Advanced Materials Research, 1017. pp. 532-538. ISSN 1662-8985
Walker, David D., Yu, Guo Yu, Gray, Caroline, Rees, Paul, Bibby, Matthew, Wu, Hsing Yu and Zheng, Xiao (2016) Process automation in computer controlled polishing. Advanced Materials Research, 1136. pp. 684-689. ISSN 1662-8985
Wallis, Rory (2017) The Analysis of Frequency Dependent Vertical Localisation Thresholds and the Perceptual Effects of Vertical Interchannel Crosstalk. Doctoral thesis, University of Huddersfield.
Walton, Karl, Fleming, Leigh, Goodhand, Martin, Racasan, Radu and Zeng, Wenhan (2016) High fidelity replication of surface texture and geometric form of a high aspect ratio aerodynamic test component. Surface Topography: Metrology and Properties, 4 (2). 025003. ISSN 2051-672X
Wang, Dianwei, Wang, Jing, Liu, Ying and Xu, Zhijie (2015) An Adaptive Time-frequency Filtering Algorithm for Multi-component LFM Signals based on Generalized S-transform. In: 21st IEEE International Conference on Automation and Computing, 11-12th September 2015, University of Strathclyde, Glasgow, UK. (Unpublished)
Wang, J. Z., Gong, C.L., Lucas, Gary and Tian, Gui Yun (2006) Numerical Simulation Modelling for Velocity Measurement of Electromagnetic Flow Meter. Journal of Physics Conference Series, 48. pp. 36-40. ISSN 1742-6588
Wang, J.Z., Lucas, Gary and Tian, Gui Yun (2007) Relationship between velocity profile and distribution of induced potential for an electromagnetic flow meter. Flow Measurement and Instrumentation, 18 (2). pp. 99-105. ISSN 0955-5986
Wang, J.Z., Lucas, Gary and Tian, Gui Yun (2007) A numerical approach to the determination of electromagnetic flow meter weight functions. Measurement Science and Technology, 18 (3). pp. 548-554. ISSN 0957-0233
Wang, Jian, Jiang, Xiang and Blunt, Liam (2010) Simulation of Adaptive Sampling in Profile Measurement for Structured Surfaces. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 48-53. ISBN 9781862180932
Wang, Jian, Jiang, Xiang, Blunt, Liam and Leach, Richard K. (2009) Structured Surfaces, Measurements & Characterization. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Wang, Jing, Xu, Zhijie, Pickering, Jonathan and Mishra, Rakesh (2009) Spatio-Temporal Volume Based Video Event Detection. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Wang, Kaiwei, Cai, Z.J. and Zeng, L.J. (2005) A two-dimensional surface profile imaging technique based on heterodyne interferometer. Key Engineering Materials, 295-29. pp. 477-482. ISSN 1013-9826
Wang, Kaiwei, Jiang, Xiang and Martin, Haydn (2007) Advances of optical fibre interferometer for on-line surface measurement. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.
Wang, Kaiwei, Jiang, Xiang, Martin, Haydn and Blunt, Liam (2007) Light-beam scanning interferometry for on-line ultra precision surface measurement. In: 7th International Conference of the European Society for Precision Engineering and Nanotechnology 2007. Proceedings. Euspen, Bedford, pp. 302-305. ISBN 978-0-9553082-2-2
Wang, Kaiwei, Martin, Haydn and Jiang, Xiang (2008) Actively stabilized optical fiber interferometry technique for online/in-process surface measurement. Review of scientific instruments, 79 (2). 023109. ISSN 0034-6748
Wang, Kaiwei and Zeng, L. (2005) Heterodyne Fourier transform spectroscopy based on double-grating frequency shifter. Review of Scientific Instruments, 76 (6). 063108. ISSN 00346748
Wang, Kaiwei and Zeng, L. (2005) Two-dimensional surface-profile imaging technique based on double-grating frequency shifter. Applied Optics, 44 (22). pp. 4625-4630. ISSN 0003-6935
Wang, Kaiwei, Zeng, L. and Yin, C. (2003) Influence of the incident wave-front on intensity distribution nondiffracting beam used in large-scale measurement. Optics Communications, 216. pp. 99-103. ISSN 0030-4018
Wang, Lizhen, Lu, Joan, Yip, Yau Jim and Lu, Joan (2007) AOG-ags algorithms and applications. In: Advanced Data Mining and Applications. Lecture Notes in Computer Science, 4632/2 . Springer Berlin / Heidelberg, pp. 323-334. ISBN 9783-540738701
Wang, Lizhen, Zhou, Lihua, Lu, Joan and Yip, Yau Jim (2009) An order-clique-based approach for mining maximal co-locations. Information Sciences, 179 (19). pp. 3370-3382. ISSN 00200255
Wang, R., Gu, Fengshou and Ball, Andrew (2012) Energy recovery system optimisation in automotives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 161. ISBN 978-1-86218-106-9
Wang, R., Tran, Van Tung, Gu, Fengshou and Ball, Andrew (2013) An Investigation on Energy Recovery Analysis of Active Suspension System. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. ICAC 2013 . Brunel University, London, UK. ISBN 978-1908549082
Wang, Ruichen (2016) Modelling, testing and analysis of a regenerative hydraulic shock absorber system. Doctoral thesis, University of Huddersfield.
Wang, Ruichen, Cattley, Robert, Tian, X., Gu, Fengshou and Ball, Andrew (2013) A Valid Model of a Regenerative Hybrid Shock Absorber System. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 206-211. ISBN 9781862181212
Wang, Wei, Yu, Guoyu, Xu, Min and Walker, David D. (2014) Coordinate transformation of an industrial robot and its application in deterministic optical polishing. Optical Engineering, 53 (5). 055102. ISSN 0091-3286
Wang, Xue Z., Liu, Lande, Li, Rui F., Tweedie, Richard J., Primrose, Ken, Corbett, Jason and McNeil-Watson, Fraser K. (2009) Online characterisation of nanoparticle suspensions using dynamic light scattering, ultrasound spectroscopy and process tomography. Chemical Engineering Research and Design, 87 (6). pp. 874-884. ISSN 0263-8762
Wang, Xue Z., Liu, Lande, Li, Ruifa, Tweedie, Richard J., Primrose, Ken, Corbett, Jason and McNeil-Watson, Fraser K. (2009) Online monitoring of nanoparticle suspensions using dynamic light scattering, ultrasound spectroscopy and process tomography. Computer Aided Chemical Engineering, 26. pp. 351-356. ISSN 1570-7946
Wang, Xue Z., Xu, Qiang, Liu, Hong-wei, Shang, Wei, Ren, Yao-yao and Yu, Shu-min (2014) The method for reproducing fine grained HAZ of W strengthened high Cr steel. Materials Science and Engineering: A: Structural Materials: Properties, Microstructure and Processing, 589. pp. 50-56. ISSN 0921-5093
Wang, Y., Chen, Xun and Gindy, Nabil (2007) Surface error decomposition for fixture development. International Journal of Advanced Manufacturing Technology, 31 (9-10). pp. 948-956. ISSN 0268-3768
Wang, Y., Chen, Xun, Gindy, Nabil and Xie, J. (2008) Elastic deformation of a fixture and turbine blades system based on finite element analysis. International Journal of Advanced Manufacturing Technology, 36 (3-4). pp. 296-304. ISSN 0268-3768
Wang, Yan, Chen, Xun and Gindy, Nabil (2005) Deformation Analysis of Fixturing for Workpiece with Complex Geometry. Key Engineering Materials, 291-29. pp. 631-636. ISSN 1662-9795
Wang, Yan, Scott, Paul J. and Jiang, Xiang (2006) Category model to modeling the surface texture knowledge-base. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-7.
Wang, Yan, Scott, Paul J. and Jiang, Xiang (2005) The structure of surface texture knowledge. Journal of Physics: conference series, 13. pp. 1-4. ISSN 1742-6596
Wankling, Matthew and Fazenda, Bruno (2009) Can We Predict What You Hear? In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Wankling, Matthew and Fazenda, Bruno (2009) Subjective Validity of Figures of Merit for Room Aspect Ratio Design. In: 126th Audio Engineering Society Convention, 7-10 May 2009, Munich, Germany.
Wankling, Matthew and Fazenda, Bruno (2008) The optimization of modal spacing within small rooms. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 117-124. ISBN 978-1-86218-067-3
Webber, C J S, Payne, B.S., Gu, Fengshou and Ball, Andrew (2003) Componential coding in the condition monitoring of electrical machines Part 1: principles and illustrations using simulated typical faults. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 217 (8). pp. 883-899. ISSN 09544062
Wei, Nasha (2018) THE INVESTIGATION INTO THE CONDITION MONITORING OF TRIBOLOGICAL BEHAVIOUR BETWEEN PISTON RING AND CYLINDER LINER USING ACOUSTIC EMISSIONS. Doctoral thesis, University of Huddersfield.
Wei, Nasha, Ball, Andrew and Gu, Fengshou (2013) A Study of Alternative Fuels Potential Effects on the Combustion Engines using acoustic emission. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 239. ISBN 9781862181212
Wei, Weiqing, Zeng, Siwen, Xu, Sheng, Ma, Ling and Luo, Hanbing (2013) Empirical study in assessment of safety climate in construction site. In: Proceedings of 2013 IEEE International Conference on Business Innovation and Technology Management Conference. IEEE, pp. 167-173. ISBN 978-1-4673-5567
Weston, William and Lalor, Michael J. (1979) Determination of the dynamic flow characteristics of an electro-hydraulic servo-valve using a laser velocimeter. Journal of Physics D: Applied Physics, 12 (2). pp. 203-218. ISSN 0022-3727
Weston, William and Lalor, Michael J. (1972) Laser velocimeter boosts reliability of hydraulic servos. Design Engineering. pp. 50-51. ISSN 0308-8448
Weston, William and Lalor, Michael J. (1972) Laser velocimeter gives precise valve calibration. Design Engineering. pp. 62-65. ISSN 0308-8448
Weston, William, Lalor, Michael J. and Cleaver, J.W. (1972) Pulsatile flow measurement in hydraulic systems using a laser velocimeter. Opto-electronics, 4 (4). pp. 417-427. ISSN 0306-8919
Weston, William, Lalor, Michael J. and Rees Jones, J. (1979) Optimal design of an electro-hydraulic flow control system using laser velocimeter feedback. ISA Transactions, 18 (3). pp. 89-99. ISSN 0019-0578
Whitehouse, D.J. (2008) Nanometrology. Contemporary Physics, 49 (5). pp. 351-374. ISSN 00107514
Whyte, Griogair, Darbari, Faisal, McGregor, Ian, Glover, Ian and Thayne, Iain (2008) Different Feeding Geometries for Planar Elliptical UWB Dipoles, and the Excitation of Leakage Current. In: 2008 38th European Microwave Conference. IEEE, pp. 1382-1385. ISBN 9782874870064
Williamson, James, Martin, Haydn and Jiang, Xiang (2013) High Resolution Dispersed Reference Interferometry. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 212-217. ISBN 9781862181212
Wojciechowski, L., Kubiak, K.J. and Mathia, T.G. (2016) Roughness and wettability of surfaces in boundary lubricated scuffing wear. Tribology International, 93 (B). pp. 593-601. ISSN 0301-679X
Woodcock, Rebecca (2017) The application of parametric estimation techniques to wavelength scanning interferometry. Masters thesis, University of Huddersfield.
Woodcock, Rebecca, Muhamedsalih, Hussam, Martin, Haydn and Jiang, Xiangqian (2016) Burg algorithm for enhancing measurement performance in wavelength scanning interferometry. Surface Topography: Metrology and Properties, 4 (2). 024003. ISSN 2051-672X
Wright, Daniel (2011) Introduction of a Semi Automatic Quality Control Process into an SME. Masters thesis, University of Huddersfield.
Wright, Daniel, Murgatroyd, S., Longstaff, Andrew P., Myers, Alan and Fletcher, Simon (2010) Process control within an SME to increase output and achieve consistent manufacture of components. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932
Wu, Song and Sun, Quanbin (2014) A configurable agent-based crowd model with generic behaviour effect representation mechanism. Computer-Aided Civil and Infrastructure Engineering, 29 (7). pp. 531-545. ISSN 1093-9687,
Wu, Song, Wood, Gerard, Ginige, K and Jong, SW (2014) A technical review of BIM based cost estimating in UK quantity surveying practice, standards and tools. Journal of Information Technology in Construction (ITCon), 19. pp. 534-562. ISSN 1874-4753
Xie, F., Xiao, Shaojun, Blunt, Liam and Jiang, Xiang (2007) Component-based software framework for surface topography visualization and analysis. In: The 11th International Conference on Metrology and Properties of Engineering, 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.
Xiouras, Christos, Angelis-Dimakis, Athanasios, Arampatzis, George and Assimacopoulos, Dionysis (2011) Environmental and energy assessment of new vehicle technologies in the Greater Athens Area. In: Proceedings of the 12th International Conference on Environmental Science and Technology. Curran Associates, Inc., pp. 2034-2041. ISBN 978-1-62748-192-2
Xu, Qiang (2004) The development of validation methodology of multi-axial creep damage constitutive equations and its application to 0.5Cr0.5Mo0.25V ferritic steel at 590°C. Nuclear Engineering and Design, 228 (1-3). pp. 97-106. ISSN 0029-5493
Xu, Qiang and Barrans, Simon (2003) The Development of multi-axial creep damage constitutive equations for 0.5Cr0.5Mo0.25V ferritic steel at 590.DEG.C.. JSME International Journal Series A, 46 (1). pp. 51-59. ISSN 13447912
Xu, Qiang, Barrans, Simon, Holmes, A. and Ford, Derek G. (2004) Understanding the dynamic response of a machine tool structure by finite element analysis. In: EUSPEN 4th International Conference, 30th May-3rd June 2004, Glasgow. (Unpublished)
Xu, Qiang and Lu, Joan (2009) A review of finite element analysis of metal cutting. In: FAIM 2009 Flexible Automation and Intelligent Manufacturing 19th International Conference, 6th - 8th July 2009, University of Teeside, Middlesbrough, UK. (Unpublished)
Xu, Qiang, Lu, Zhongyu and Wang, Xue (2017) Damage modelling: the current state and the latest progress on the development of creep damage constitutive equations for high Cr steels. Materials at High Temperatures, 34 (3). pp. 229-237. ISSN 0960-3409
Xu, Qihua, Xu, Qiang, Lu, Zhongyu and Barrans, Simon (2013) A Review of Creep Deformation and Rupture Mechanisms of Cr-Mo Alloy for the Development of Creep Damage Constitutive Equations under Lower Stress. Journal of communication and computer, 10. pp. 72-81. ISSN 1548-7709
Xu, X., Xu, H., Deng, H., Gu, Fengshou and Talbot, Chris J. (2014) An investigation of a hypocycloid mechanism based twin-rotor piston engine. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN 0954-4062
Xu, Xun, Ding, Lieyun, Luo, Hanbin and Ma, Ling (2014) From Building Information Modeling to City Information Modeling. Journal of Information Technology in Construction (ITCon), 19. pp. 292-307. ISSN 1874-4753
Xu, Xun, Ma, Ling and Ding, Lieyun (2014) A Framework for BIM-Enabled Life-Cycle Information Management of Construction Project. International Journal of Advanced Robotic Systems, 11 (8). p. 126. ISSN 1729-8814
Xu, Yongjia (2019) RESEARCH ON KEY TECHNOLOGIES FOR IMPROVEMENT OF MEASUREMENT ACCURACY OF STEREO DEFLECTOMETRY. Doctoral thesis, University of Huddersfield.
Xu, Yuandong, Haiyang, Li, Zhen, Dong, Rehab, Ibrahim, Gu, Fengshou and Ball, Andrew (2017) Fault Detection of Rolling Bearings Using an Ensemble Average Autocorrelation Based Stochastic Subspace Identification. In: 24th international congress on sound and vibration, 23rd-27th July 2017, London. (Unpublished)
Xu, Yuandong, Tang, Xiaoli, Gu, Fengshou, Ball, Andrew and Gu, James Xi (2017) Early Detection of Rolling Bearing Faults Using an Auto-correlated Envelope Ensemble Average. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017).
Yan, W., Scott, Paul J. and Jiang, Xiang (2007) Structures of specification and verification knowledge-base in surface texture knowledge-based system. In: 10th International Conference on Computer Aided Tolerancing, 21st-23rd March, 2007, Erlangen, Germany.
Yang, Chunlei, Tian, Gui Yun and Ward, Stephen (2006) Multibiometrics authentication in pos application. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.
Yang, Shuming (2009) A Chip Device For On-line Assessment In Nano-scale Surface Manufacture. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Yang, Shuming and Jiang, Xiang (2008) The Roughness Measurement and Assessment of the Super-smooth Surface of Hard Disks. Key Engineering Materials, 364-36. pp. 1174-1179. ISSN 1013-9826
Yang, Shuming and Jiang, Xiang (2006) The roughness measurement of the super-smooth surface of hard disks. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-7.
Yang, Shuming, Jiang, Xiang, Maxwell, Graeme and Wang, Kaiwei (2008) An integrated optical coupler used in a fibre interferometry system for on-line surface measurements. Optics Communications, 281 (5). pp. 1099-1107. ISSN 0030-4018
Yang, Su (2009) PC-Grade Parallel Processing and Hardware Acceleration for Large-Scale Data Analysis. Doctoral thesis, University of Huddersfield.
Yang, Xin (2018) The Development of Creep Damage Constitutive Equations for High Chromium Steel Based on the Mechanism of Cavitation Damage. Doctoral thesis, University of Huddersfield.
Yao, Shaowen, Barrans, Simon and Blunt, Liam (2007) Incompressible and Analytical Study on a Basic Model of Out-Pump Type Complex Journal Gas Bearings. In: The 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2007), 24-27 September 2007, Tohoku University, Sendai, Japan. (Unpublished)
Yao, Shaowen, Barrans, Simon and Blunt, Liam (2008) Incompressible and Analytical Study on a Basic Model of Out-Pump Type Complex Journal Gas Bearings. Key Engineering Materials, 381-38. pp. 153-156. ISSN 1013-9826
Yap, Y. F., Chai, John, Wong, T. N., Toh, K. C. and Zhang, H. Y. (2006) A Global Mass Correction Scheme for the Level-Set Method. Numerical Heat Transfer, Part B: Fundamentals, 50 (5). pp. 455-472. ISSN 1040-7790
Ye, Ruifang, Jiang, Xiangqian, Blunt, Liam, Cui, Changcai and Yu, Qing (2015) The application of 3D-motif analysis to characterize diamond grinding wheel topography. Measurement, 77. pp. 73-79. ISSN 0263-2241
Yeung, Ka Yiu and Chen, Xun (2007) 3D freeform component fixture design optisation using a genetic algorithm. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.
Yin, Ying and Tian, Gui Yun (2006) Automatic x-ray image characterisation for non-destructive evaluation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.
Young, Christian, Blunt, Liam and Tong, Zhen (2017) Development of an ultra-precision grinding technique for the production of structured micro-patches on ceramics and tool steel. In: euspen's 17th International Conference, 29 May - 2 June 2017, Hannover, Germany.
Yu, Guoyu, Walker, David D., Li, Hongyu, Zheng, Xiao and Beaucamp, Anthony (2017) Research on edge-control methods in CNC polishing. Journal of the European Optical Society-Rapid Publications, 13 (24). ISSN 1990-2573
Yun, J., Lin, D., Liu, Z., Yin, C. and Hou, W. (2005) Adjustable plane mirror interferometer adapted for microelectronic mask with different thickness. Journal of Physics: conference series, 13. pp. 414-417. ISSN 1742-6596
Zainal, A.R., Glover, Ian, Watson, P.A. and Hassan, S.I.S. (1993) Rain attenuation measurements at 6.75 GHz in Malaysia. In: Proceedings of IEEE Singapore International Conference on Networks/International Conference on Information Engineering '93. IEEE, pp. 573-577. ISBN 9780780314450
Zainal Abidin, Nurul Afroze (2018) Resilience of Malaysian Public Sector Construction Industry to Supply Chain Disruptions. Doctoral thesis, University of Huddersfield.
Zairi, S. and Tian, Gui Yun (2004) Design of buried hinge based 3D torsional micro mirrors. Proceeding of the Sixth IEEE CPMT Conference on High Density Microsystem Design and Packaging and Component Failure Analysis, 2004. HDP '04. pp. 164-170.
Zala, Karina (2019) FLOW CHARACTERISTICS AND DESIGN METHODOLOGY FOR A CENTRIFUGAL COMPRESSOR VOLUTE. Doctoral thesis, University of Huddersfield.
Zeibak-Shini, Reem, Ma, Ling and Sacks, Rafael (2015) Mapping the structural frame of a damaged reinforced concrete building using as-damaged scans and as-built BIM. In: Proceedings of the 32nd CIB W78 Conference 2015. CIB, pp. 790-799.
Zeibak-Shini, Reem, Sacks, Rafael, Ma, Ling and Filin, Sagi (2016) Towards generation of as-damaged BIM models using laser-scanning and as-built BIM: First estimate of as-damaged locations of reinforced concrete frame members in masonry infill structures. Advanced Engineering Informatics, 30 (3). pp. 312-326. ISSN 1474-0346
Zeng, Qiang, Zainab, Mones, Shao, Yimin, Gu, Fengshou and Ball, Andrew (2017) Planetary Gear Fault Diagnosis Based on Instantaneous Angular Speed Analysis. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017).
Zeng, S., Blunt, Liam and Jiang, Xiang (2012) Material removal investigation in bonnet polishing of CoCr alloy. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 25-30. ISBN 978-1-86218-106-9
Zeng, Shengye, Blunt, Liam, Jiang, Xiang and Bills, Paul J. (2010) Investigation of the material removal characteristic for polishing CoCr alloy. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 177-182. ISBN 9781862180932
Zeng, Shengyue (2014) Bonnet Polishing of Cobalt Chrome Alloys for Artificial Implants. Doctoral thesis, University of Huddersfield.
Zeng, Wenhan, Jiang, Xiang, Gao, Y. and Xie, T. (2005) Texture extraction and identification of 3D engineering surfaces. Key Engineering Materials, 295-29. pp. 453-458. ISSN 1013-9826
Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2005) Complex ridgelets for the extraction of morphological features on engineering surfaces. Journal Paper of Physics: Conference Series, 13. pp. 246-249. ISSN 1742-6588
Zhang, H., Brown, L. and Blunt, Liam (2006) Investigation of characteristics at the stem cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.
Zhang, H., Brown, L. and Blunt, Liam (2007) Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacement. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK. (Unpublished)
Zhang, Hao (2009) Model-based Fault Detection For A Turbocharger. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Zhang, Hongyu, Brown, Leigh and Blunt, Liam (2007) A better understanding of the surface topography at the stem-cement interface. In: ASME/STLE International Joint Tribology Conference, 22nd-24th October 2007, San Diego, California, USA.
Zhang, Hongyu, Brown, Leigh, Blunt, Liam and Barrans, Simon (2008) An investigation on generation of debris at the stem cement interface. In: 8th World Biomaterials Congress, 28th May -1st June 2008, Amsterdam, The Netherlands. (Unpublished)
Zhang, Hongyu, Brown, Leigh, Blunt, Liam, Jiang, Xiang and Barrans, Simon (2008) Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacement. Wear, 266 (5-6). pp. 566-569. ISSN 0043-1648
Zhang, Peng (2018) A Novel Non-Contact Profilometer for Characterising Grey Surfaces Before Polishing. Doctoral thesis, University of Huddersfield.
Zhang, Peng, Li, Jie, Yu, Guoyu and Walker, David D. (2016) Development of Swinging Part Profilometer. In: Optics and Measurement 2016, 11th-14th October 2016, Liberec, Czech Republic. (Unpublished)
Zhang, Ruiliang, Gu, Fengshou, Mansaf, Haram, Wang, Tie and Ball, Andrew D. (2017) Gear wear monitoring by modulation signal bispectrum based on motor current signal analysis. Mechanical Systems and Signal Processing, 94. pp. 202-213. ISSN 08883270
Zhang, Ruiliang, Gu, Xi, Gu, Fengshou, Wang, Tie and Ball, Andrew (2017) Gear wear process monitoring using a sideband estimator based on modulation signal bispectrum. Applied Sciences, 7 (3). p. 274. ISSN 2076-3417
Zhang, Tao (2018) A NEW METHOD OF WAVELENGTH SCANNING INTERFEROMETRY FOR INSPECTING SURFACES WITH MULTI-SIDE HIGH-SLOPED FACETS. Doctoral thesis, University of Huddersfield.
Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2009) The Orthogonal Distance Fitting Of Parametric Surfaces For Precision Coordinate Metrology. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)
Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2009) A new free-form surface fitting method for precision coordinate metrology. Wear, 266 (5-6). pp. 543-547. ISSN 0043-1648
Zhang, Xiaonan, Bakis, Nick, Lukins, Timothy C., Ibrahim, Yahaya M., Wu, Song, Kagioglou, Mike, Aouad, Ghassan, Kaka, Ammar P. and Trucco, Emanuele (2009) Automating progress measurement of construction projects. Automation in Construction, 18 (3). pp. 294-301. ISSN 09265805
Zhang, Zhichao and Lucas, Gary (2013) Determination of power law velocity profiles by electromagnetic flow measurement. In: 7th World Congress on Industrial Process Tomography. WCIPT7 . International Society for Industrial Process Tomography, Krakow, Poland, pp. 747-756. ISBN 978 0 853 16323 7
Zhang, Zonghua, Huang, Shujun, Gao, Nan, Gao, F. and Jiang, Xiang (2017) Full-Field 3D Shape Measurement of Specular Object Having Discontinuous Surfaces. In: International Conference on Optical and Photonic Engineering (icOPEN 2017), 5-7 April 2017, Singapore.
Zhao, Nan and Schofield, Nigel (2017) Field-Weakening Capability of Interior Permanent Magnet Machines with Salient Pole Shoe Rotors. IEEE Transactions on Magnetics (99). ISSN 0018-9464
Zhao, Ping, Gao, Nan, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2018) Performance analysis and evaluation of direct phase measuring deflectometry. Optics and lasers in engineering, 103. pp. 24-33. ISSN 0143-8166
Zhao, Xin, Lucas, Gary and Leeungculsatien, Teerachai (2009) Using the four-sensor probe to measure the bubble velocity vector in bubble water two phase flow. In: What, Where, When: Multi-dimensional Advances for Industrial Process Monitoring International Symposium, Tuesday 23 - Wednesday 24 June 2009, Leeds, UK. (Unpublished)
Zhao, Yunshi, Lucas, Gary, Leeungculsatien, Teerachai and Zhang, T. (2014) Measurement and control systems for an imaging electromagnetic flow meter. ISA Transactions, 53 (2). pp. 423-432. ISSN 0019-0578
Zheng, Lin, Shi, Zhanqun and Ball, Andrew (2013) Vehicle Anti-lock Braking System Performance using dSPACE. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 1-6. ISBN 9781862181212
Zheng, Xiao (2018) Mid-spatial Frequency Control for Automated Functional Surface Processing. Doctoral thesis, University of Huddersfield.
Zheng, Xuming (2021) The development and application of creep damage constitutive equations for high Cr steels over a wide range of stress. Doctoral thesis, University of Huddersfield.
Zhiliang, Ma, Zhenhua, Wei, Wu, Song and Zhe, Lou (2011) Application and extension of the IFC standard in construction cost estimating for tendering in China. Automation in Construction, 20 (2). pp. 196-204. ISSN 09265805
Zhou, Hongliang, Zhou, Hanhua, Zhang, Hongjian, Ge, Xiaocheng, Zhao, Yanjie and Lin, Weibin (2017) Pressure measurement based on multi-waves fusion algorithm. IET Science, Measurement & Technology, 11 (3). pp. 354-362. ISSN 1751-8830
Zhu, Hao, Blunt, Liam and Jiang, Xiang (2009) An Active Contour Based Algorithm for Micro-scale Surface Feature Extraction. In: The Swedish Production Symposium, 2-3 December 2009, Göteborg, Sweden.
Ziao, S. J., Jiang, Xiang and Blunt, Liam (2000) Three-dimensional functional parameters for characterization of the bio-engineering surface at different stages of wear. In: 1st International Conference on Tribology in Environmental Design 2000 - The Characteristics of Interacting Surfaces. Professional Engineering Publishing, London, UK, pp. 155-161. ISBN 1-86058-266-4
Öpöz, Tahsin Tecelli and Chen, Xun (2012) Experimental investigation of material removal mechanism in single grit grinding. International Journal of Machine Tools and Manufacture, 63. pp. 32-40. ISSN 08906955