Up a level
Export as [feed] RSS
Jump to: 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1989 | 1985
Number of items at this level: 535.

2016

Beech, Guy (2016) The Benefits of Using XML Technologies in Astronomical Data Retrieval and Interpretation. In: Proceedings of the 2016 conference on Big Data from Space (BiDS’16). Publications Office of the European Union, Joint Research Centre, pp. 268-271. ISBN 978-92-79-56980-7

2015

Beech, Guy (2015) An Investigation of the Benefit of XML Technologies in Astronomical Data Interpretation. Masters thesis, University of Huddersfield.

Feng, Guojin, Zhen, Dong, Tian, Xiange, Gu, Fengshou and Ball, Andrew (2015) A Novel Method to Improve the Resolution of Envelope Spectrum for Bearing Fault Diagnosis Based on a Wireless Sensor Node. In: Vibration Engineering and Technology of Machinery. Springer, pp. 765-775. ISBN 978-3-319-09918-7

Lane, Mark, Ashari, Djoni, Gu, Fengshou and Ball, Andrew (2015) Investigation of Motor Current Signature Analysis in Detecting Unbalanced Motor Windings of an Induction Motor with Sensorless Vector Control Drive. In: Vibration Engineering and Technology of Machinery. Springer, pp. 801-810. ISBN 978-3-319-09918-7

2014

Abubaker, Azza (2014) Factors Influence Reading From Screen of Arabic Textbook for Learning by Children Aged 9 to 13. Doctoral thesis, university of Huddersfield.

Abusaad, Samieh, Benghozzi, Ahmed, Brethee, Khaldoon F., Gu, Fengshou and Ball, Andrew (2014) Investigating the Effect of Water Contamination on Gearbox Lubrication based upon Motor Control Data from a Sensorless Drive. In: 3rd International Workshop and Congress on eMaintenance, 17th - 18th June 2014, Lulea, Sweden.

Ahmed, M., Smith, Ann, Gu, Fengshou and Ball, Andrew (2014) Fault Diagnosis of Reciprocating Compressors Using Revelance Vector Machines with A Genetic Algorithm Based on Vibration Data. In: The 20th International Conference on Automation and Computing (ICAC'14), 12-13 September 2014, Cranfield University. (Unpublished)

Al-Braik, Abdulrahman, Hamomd, Osama, Gu, Fengshou and Ball, Andrew (2014) Diagnosis of Impeller Faults in a Centrifugal Pump Using Vibration Signals. In: Eleventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 10th - 12th June 2014, Manchester, UK.

Ammari, Faisal and Lu, Joan (2014) Intelligent Banking XML Encryption using Effective Fuzzy Classification. In: Emerging Trends in Information and Communication Technologies Security. Elsevier. ISBN 9780124114746

Ashari, Djoni, Lane, Mark, Gu, Fengshou and Ball, Andrew (2014) Detection and Diagnosis of Broken Rotor Bar Based on the Analysis of Signals from a Variable Speed Drive. In: 3rd International Workshop and Congress on eMaintenance, 17th - 18th June 2014, Lulea, Sweden.

Gu, Fengshou, Tian, Xiange, Chen, Zhi, Rehab, Ibrahim and Ball, Andrew (2014) Fault severity diagnosis of rolling element bearings based on kurtogram and envelope analysis. International journal of structural analysis & design, 1 (2). ISSN 2372 - 4102

Gu, Fengshou, Wang, T., Alwodai, Ahmed, Tian, Xiange, Shao, Yimin and Ball, Andrew (2014) A new method of accurate broken rotor bar diagnosis based on modulation signal bispectrum analysis of motor current signals. Mechanical Systems and Signal Processing. ISSN 0888-3270

Hamed, M., Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2014) Effects of Tyre Pressure on Vehicle Suspension Performance. In: World Symposium on Mechanics Engineering & Applied Physics ( WSMAEP'14), 18th - 20th June 2014, Sousse, Tunisia. (Unpublished)

He, Xiaocong, Gu, Fengshou and Ball, Andrew (2014) A review of numerical analysis of friction stir welding. Progress in Materials Science, 65. pp. 1-66. ISSN 0079-6425

He, Xiaocong, Zhao, Lun, Yang, Huiyan, Xing, Baoying, Wang, Yuqi, Deng, Chengjiang, Gu, Fengshou and Ball, Andrew (2014) Investigations of strength and energy absorption of clinched joints. Computational Materials Science, 94. pp. 58-65. ISSN 0927-0256

Hussein, Hawre and Mishra, Rakesh (2014) A LabVIEW-based PI controller for controlling CE 105 coupled Tank System. In: CONTROL 2014 10th International Conference of Control, 9-11 July 2014, Loughborough University.

Jiang, Kuosheng, Xu, Guanghua, Liang, Lin, Tao, Tangfei and Gu, Fengshou (2014) The Recovery of Weak Impulsive Signals Based on Stochastic Resonance and Moving Least Squares Fitting. Sensors, 14 (8). pp. 13692-13707. ISSN 1424-8220

Lu, Joan (2014) Big Data Age vs. Mobile Age - A Huge Challenge for Both Areas. In: The Fourth International Conference on Advanced Communications and Computation, July 20 - 24, 2014, Paris, France.

Lu, Joan (2014) The Impact of Mobile Computing on ICT Enhanced Interdisciplinary and Multidisciplinary Applications. In: The First international scientific conference, 1-2 April 2014, Sulaymaniyah, Kurdistan Region of Iraq.

Lu, Joan (2014) The State of Mobile Learning Research in the EU. In: InSITE 2014: Informing Science + IT Education, June 30-July 4, 2014, Wollongong, NSW Australia.

Rehab, Ibrahim, Tian, Xiange, Gu, Fengshou and Ball, Andrew (2014) The fault detection and severity diagnosis of rolling element bearings using modulation signal bispectrum. In: Eleventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 10th - 12th June 2014, Manchester, UK.

Salahat, Mohammed and Wade, Steve (2014) Teaching Information Systems Development Through an Integrated Framework. In: The UKAIS International Conference on Information Systems (UKAIS) 2014, 7-9 April 2014, Oxford University, UK. (Unpublished)

Sawsaa, Ahlam and Lu, Joan (2014) Building an Advance Domain Ontology Model of Information Science (OIS). International Journal of Digital Information and Wireless Communications (IJDIWC), 4 (2). pp. 90-98. ISSN 2225-658X

Xu, X., Xu, H., Deng, H., Gu, Fengshou and Talbot, Chris J. (2014) An investigation of a hypocycloid mechanism based twin-rotor piston engine. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN 0954-4062

2013

Alwodai, Ahmed, Wang, Tie, Chen, Zhi, Gu, Fengshou, Cattley, Robert and Ball, Andrew (2013) A Study of Motor Bearing Fault Diagnosis using Modulation Signal Bispectrum Analysis of Motor Current Signals. Journal of Signal and Information Processing, 4 (3B). pp. 132-137. ISSN 2159-4481

Ammari, Faisal, Lu, Joan and Aburrous, Maher (2013) Improved Banking XML Transaction Encryption Using Tag Fuzzy Classification. In: International Conference on Computer Applications Technology, January 20-22 2013, Sousse,Tunisia. (Unpublished)

Asim, Taimoor, Mishra, Rakesh, Paris, Achilleos and Zala, Karina (2013) Optimal Design Methodology for On-shore Hydraulic Pipelines Transporting Spherical Capsules. Procedia CIRP: TESC 2013 - 2nd International Through-life Engineering Services Conference, 11. pp. 305-310. ISSN 2212 - 8271

Elbarghathi, Fathalla, Tian, Xiange, Tung Tran, Van, Gu, Fengshou and Ball, Andrew (2013) Multi-stages helical gearbox fault detection using vibration signal and Morlet wavelet transform adapted by information entropy difference. In: COMADEM 2013, 11-13 June 2013, Helsinki, Finland. (Submitted)

He, Xiao Cong, Zhen, Dong, Xing, Bao Ying, Zeng, Kai, Ding, Yan Fang, Gu, Fengshou and Ball, Andrew (2013) Free Vibration Measurements of Single-Lap Cantilevered SPR Beams. Applied Mechanics and Materials, 321-32. pp. 33-36. ISSN 1662-7482

He, Xiaocong, Gu, Fengshou and Ball, Andrew (2013) Fatigue Behaviour of Fastening Joints of Sheet Materials and Finite Element Analysis. Advances in Mechanical Engineering, 2013. pp. 1-9. ISSN 1687-8132

Hu, Lei, Hu, Niaoqing, Zhang, Xinpeng, Gu, Fengshou and Gao, Ming (2013) Novelty detection methods for online health monitoring and post data analysis of turbopumps. Journal of Mechanical Science and Technology, 27 (7). pp. 1933-1942. ISSN 1738-494X

Lu, Joan (2013) Information Retrieval Methods for Multidisciplinary Applications. IGI Global, USA. ISBN 9781466638983

Lu, Joan, Long, Hua, Xu, Qiang and Lei, Qian (2013) A New RSSI-based Centroid Localization Algorithm by Use of Virtual Reference Tags. In: The Third International Conference on Advanced Communications and Computation. INFOCOMP 2013 . IARIA, Lisbon, Portugal, pp. 122-128. ISBN 978-1-61208-310-0

Mahmood, Sardasht and Lu, Joan (2013) An Investigation into Mobile Based Approach for Healthcare Activities, Occupational Therapy System. Proceedings of The International Conference on Software Engineering Research and Practice, SERP13. pp. 95-101.

Manga, Faisal and Lu, Joan (2013) An Investigation in the Impact of Mobile Learning on today’s Educational Environment. In: Proceedings of the 2013 International Conference on e-Learning, e-Business, Enterprise Information Systems, and e-Government. EEE (2013). WorldComp 2013, pp. 130-135. ISBN 1601322402

Meng, Zhaozong, Lu, Joan and Sawsaa, Ahlam (2013) Integrating Smartphone’s Intelligent Techniques on Authentication in Mobile Exam Login Process. In: Computational Collective Intelligence. Technologies and Applications: 5th International Conference, ICCCI 2013, Craiova, Romania, September 11-13, 2013, Proceedings. Lecture Notes in Computer Science (8083). Springer, London, pp. 130-142. ISBN 978-3-642-40494-8

Parkinson, Simon and Crampton, Andrew (2013) A Novel Software Tool for Analysing NT® File System Permissions. International Journal of Advanced Computer Science and Applications, 4 (6). pp. 266-272. ISSN 2156-5570

Sawsaa, Ahlam and Lu, Joan (2013) Modeling Domain Ontology for Occupational Therapy Resources Using Natural Language Programming (NLP) Technology to Model Domain Ontology of Occupational Therapy Resources. International Journal of Information Retrieval Research, 3 (4). pp. 104-119. ISSN 2155-6377

Sawsaa, Ahlam and Lu, Joan (2013) Visualizing Information Science Knowledge by Modelling Domain Ontology (OIS). International Journal of Information Retrieval Research, 3 (4). pp. 52-80. ISSN 2155-6377

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2013) Emission Characteristics of CI Engine Running with Biodiesel. In: World Congress on Petrochemistry and Chemical Engineering, 18th - 20th November 2013, San Antonio, Texas, USA. (Unpublished)

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2013) LHV Predication Models and LHV Effect on the Performance of CI Engine Running with Biodiesel Blends. Energy Conversion and Management, 71. pp. 217-226. ISSN 0196-8904

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2013) Combustion and Performance Characteristics of CI Engine Running with Biodiesel. Energy, 51 (1). pp. 101-115. ISSN 0360-5442

Tian, Xiange, Wang, Tie, Chen, Zhi, Gu, Fengshou and Ball, Andrew (2013) A transient enhancement method for two-stage helical gearbox fault diagnosis based on ALE. Journal of Signal and Information Processing, 4 (3B). pp. 132-137. ISSN 2159-4481

Zhen, Dong, Wang, T., Gu, Fengshou and Ball, Andrew (2013) Fault diagnosis of motor drives using stator current signal analysis based on dynamic time warping. Mechanical Systems and Signal Processing, 34 (1-2). pp. 191-202. ISSN 0888-3270

2012

Abdusslam, S.A., Raharjo, Parno, Gu, Fengshou and Ball, Andrew (2012) Bearing defect detection and diagnosis using a time encoded signal processing and pattern recognition method. Journal of Physics: Conference Series, 364. 012036. ISSN 1742-6596

Abubaker, Azza and Lu, Joan (2012) Investigation effective factors into reading online arabic textbook for learning by children age 9 to 12. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9

Abubaker, Azza and Lu, Joan (2012) The Optimum Font Size and Type for Students Aged 9-12 Reading Arabic Characters on Screen: A Case Study. Journal of Physics: Conference Series, 364. ISSN 1742-6596

Ahmed, M., Gu, Fengshou and Ball, Andrew (2012) Fault Detection and Diagnosis using Principal Component Analysis of Vibration Data from a Reciprocating Compressor. In: 18th International Conference On Automation And Computing (ICAC), 2012. IEEE, Cardiff, UK, pp. 461-466. ISBN 978-1-4673-1559-3

Ahmed, M., Gu, Fengshou and Ball, Andrew (2012) Fault Detection of Reciprocating Compressors using a Model from Principles Component Analysis of Vibrations. Journal of Physics: Conference Series, 364. 012133. ISSN 1742-6596

Albraik, A., Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2012) Diagnosis of Centrifugal Pump Faults Using Vibration Methods. Journal of Physics: Conference Series, 364. 012139. ISSN 1742-6596

Alseddiqi, Mohamed, Mishra, Rakesh and Asim, Taimoor (2012) Development of an Extended Information Quality Framework for E-Learning System Content for Engineering Education Courses (EECs). In: Learning with Mobile Technologies, Handheld Devices, and Smart Phones: Innovative Methods. IGI Global, Hershey, PA, USA, pp. 162-170. ISBN 9781466609365

Alseddiqi, Mohamed, Mishra, Rakesh and Pislaru, Crinela (2012) An Evaluation Quality Framework for Analysing School-Based Learning (SBL) to Work-Based Learning (WBL) Transition Module. In: COMADEM 2012, 18th-20th June 2012, University of Huddersfield, UK.

Alseddiqi, Mohamed, Mishra, Rakesh and Pislaru, Crinela (2012) The New School-Based Learning (SBL) to Work-Based Learning (WBL) Transition Module: A Practical Implementation in the Technical and Vocational Education (TVE) System in Bahrain. In: COMADEM 2012, 18th-20th June 2012, University of Huddersfield, UK.

Alwodai, Ahmed, Gu, Fengshou and Ball, Andrew (2012) A Comparison of Different Techniques for Induction Motor Rotor Fault Diagnosis. Journal of Physics: Conference Series, 364. 012066. ISSN 1742-6596

Alwodai, Ahmed, Xia, X., Shao, Yimin, Gu, Fengshou and Ball, Andrew (2012) Modulation Signal Bispectrum Analysis of Motor Current Signals for Stator Fault Diagnosis. In: 18th International Conference on Automation and Computing (ICAC), 2012. IEEE, Loughborough, UK, pp. 1-6. ISBN 9781908549006

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Dynamic simulation of a roller rig. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 51-56. ISBN 978-1-86218-106-9

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modelling and simulation of dynamic wheel-rail interaction using a roller rig. Journal of Physics: Conference Series, 364. 012060. ISSN 1742-6596

Arebi, Lufti, Gu, Fengshou and Ball, Andrew (2012) A comparative study of misalignment detection using a novel Wireless Sensor with conventional Wired Sensors. Journal of Physics: Conference Series, 364. 012049. ISSN 1742-6596

Ashari, Djoni, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Artificial intelligence-based condition monitoring for practical electrical drives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 143. ISBN 978-1-86218-106-9

Asim, Taimoor, Mishra, Rakesh and Rao, Vasu (2012) Effect of Eccentricity on Pipe Boundary Layer Growth for Flows in Annulus. In: Computing and Engineering Researchers’ Conference, March 2012, University of Huddersfield.

Asim, Taimoor, Mishra, Rakesh and Rao, Vasu (2012) Spatiotemporal Growth of Laminar Boundary Layers in a Concentric Annulus. In: Computing and Engineering Researchers’ Conference, March 2012, University of Huddersfield.

Baqqar, Mabrouka, Wang, Tie, Ahmed, Mahmud, Gu, Fengshou, Lu, Joan and Ball, Andrew (2012) A General Regression Neural Network Model for Gearbox Fault Detection using Motor Operating Parameters. In: 18th International Conference On Automation And Computing (ICAC), 2012. IEEE, Cardiff, UK, pp. 584-588. ISBN 978-1-4673-1559-3

Benghozzi, A., Shao, Y., Shi, Z., Gu, Fengshou and Ball, Andrew (2012) The Diagnosis of a Gearbox Transmission System Using Electrical Control Parameters. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. IEEE, Loughborough, UK, pp. 1-6. ISBN 9781908549006 / 9781467317221

Binzabiah, Reyad and Wade, Steve (2012) An Approach to Developing an Ontology that Represents Knowledge Embedded in Filmed Materials. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 91-97. ISBN 978-1-86218-106-9

Binzabiah, Reyad and Wade, Steve (2012) Building an Ontology Based on Folksonomy: An attempt to represent knowledge embedded in filmed materials. Journal of Internet Technology and Secured Transactions (JITST), 2 (1/2). ISSN 2046-3723

Binzabiah, Reyad and Wade, Steve (2012) Modeling of an ontology to represent the knowledge embedded in filmed materials. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9

Chen, Z., Wang, T., Zhao, Z., Shen, J., Zhen, D. and Gu, Fengshou (2012) The Lightweight Design of a Dump Truck Frame based on Dynamic Responses. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. IEEE, Loughborough, UK, pp. 1-5. ISBN 978-1-4673-1722-1

Chen, Zhi, Wang, T., Gu, Fengshou, Haram, Mansaf and Ball, Andrew (2012) Gear Transmission Fault Diagnosis Based on the Bispectrum Analysis of Induction Motor Current Signatures. Journal of Mechanical Engineering, 48 (21). pp. 84-90. ISSN 0577-6686

Elbarghathi, Fathalla, Ball, Andrew and Gu, Fengshou (2012) Two stage helical gearbox fault detection and diagnosis based on continuous wavelet transformation of time synchronous averaged vibration signals. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9

Elbarghathi, Fathalla, Wang, T., Zhen, Dong, Gu, Fengshou and Ball, Andrew (2012) Two Stage Helical Gearbox Fault Detection and Diagnosis based on Continuous Wavelet Transformation of Time Synchronous Averaged Vibration Signals. Journal of Physics: Conference Series, 364. 012083. ISSN 1742-6596

Elzawi, A. and Wade, Steve (2012) Barriers to ICT adoption in quality of engineering research in Libya : how to bridge the digital divide. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 144. ISBN 978-1-86218-106-9

Elzawi, A. and Wade, Steve (2012) Barriers to ICT adoption in quality of engineering research in Libya : how to bridge the digital divide? In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 98-103. ISBN 978-1-86218-106-9

Fan, Bin, Hu, Niaoqing, Hu, Lei and Gu, Fengshou (2012) Application of Phase Space Warping on Damage Tracking for Bearing Fault. Journal of Physics: Conference Series, 364. 012025. ISSN 1742-6596

Green, J.R., Mishra, Rakesh, Charlton, M. and Owen, R. (2012) Local Analysis of Flow Conditions within a Geometrically Complex Control Valve Trim using CFD. Journal of Physics: Conference Series, 364. 012075. ISSN 1742-6596

Green, J.R., Mishra, Rakesh, Charlton, M. and Owen, R. (2012) Validation of CFD predictions using process data obtained from flow through an industrial control valve. Journal of Physics: Conference Series, 364. 012074. ISSN 1742-6596

Haq, K. A., Ward, Rupert and Wilkinson, Julie (2012) Preliminary frameworks and models for telework maturity within organisations. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 147. ISBN 978-1-86218-106-9

Haram, Mansaf, Wang, T., Gu, Fengshou and Ball, Andrew (2012) Electrical Motor Current Signal Analysis using a Modulation Signal Bispectrum for the Fault Diagnosis of a Gearbox Downstream. Journal of Physics: Conference Series, 364. 012050. ISSN 1742-6596

Hasan, L and Wade, Steve (2012) An investigation of the Information Needs of Local Historians. In: Proceedings of UKAIS 2012. AIS, Oxford, UK.

Hassan, Mothana A., Jiang, Xiang and Haydn, Martin (2012) Fast surface metrology using wavelength scanning and dispersive white light interferometry. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 148. ISBN 978-1-86218-106-9

He, Xiaocong, Gu, Fengshou and Ball, Andrew (2012) Recent development in finite element analysis of self-piercing riveted joints. The International Journal of Advanced Manufacturing Technology, 58 (5-8). pp. 643-649. ISSN 0268-3768

Hu, Lei, Hu, Niaoqing, Fan, Bin and Gu, Fengshou (2012) Application of novelty detection methods to health monitoring and typical fault diagnosis of a turbopump. Journal of Physics: Conference Series, 364. 012128. ISSN 1742-6596

Hu, Niaoqing, Hu, Lei, Zhang, Xiaofei, Gu, Fengshou and Ball, Andrew (2012) Enhancement detection of characteristic signal using stochastic resonance by adding a harmonic excitation. Journal of Physics: Conference Series, 364. 012046. ISSN 1742-6596

Iqbal, Saqib and Allen, Gary (2012) Pointcut Design with AODL. In: The Twenty-Fourth International Conference on Software Engineering and Knowledge Engineering (SEKE 2012), July 1-3, 2012., Redwood City, California, USA.

Lin, Jinshan, Chen, Qian, Tian, Xiange and Gu, Fengshou (2012) Fault Diagnosis of Rolling Bearings using Multifractal Detrended Fluctuation Analysis and Mahalanobis Distance Criterion. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. IEEE, Loughborough, UK, pp. 1-6. ISBN 9781467317221

Lu, Joan (2012) Learning with Mobile Technologies, Handheld Devices, and Smart Phones: Innovative Methods. IGI Global, Hershey, PA , USA. ISBN 9781466609365

Naveed, Munir, Kitchin, Diane E., Crampton, Andrew, Chrpa, Lukáš and Gregory, Peter (2012) A Monte-Carlo Path Planner for Dynamic and Partially Observable Environments. In: Computing in Games (CIG) 2012, 11-14 September 2012, Granada, Spain. (Unpublished)

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modern techniques for condition monitoring of railway vehicle dynamics. Journal of Physics: Conference Series, 364. 012016. ISSN 1742-6596

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Review of control strategies used in modern railway vehicles. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 160. ISBN 978-1-86218-106-9

Parkinson, S., Longstaff, Andrew P., Crampton, Andrew, Fletcher, Simon, Allen, Gary and Myers, Alan (2012) Automation as a Solution for Machine Tool Calibration Planning. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 57-62. ISBN 978-1-86218-106-9

Pradhan, Suman and Mishra, Rakesh (2012) Experimental verification of the four-sensor probe model for flow diagnosis in air water flow in vertical pipe. Journal of Physics: Conference Series, 364. 012073. ISSN 1742-6596

Raharjo, Parno, Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2012) Vibro-Acoustic Characteristic of A Self Aligning Spherical Journal Bearing due to Eccentric Bore Fault. In: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK. (Unpublished)

Raharjo, Parno, Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2012) Vibro-Acoustic Characteristic of A Self Aligning Spherical Journal Bearing due to Eccentric Bore Fault. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK. (Unpublished)

Raharjo, Parno, Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2012) A Comparative Study of the Monitoring of a Self Aligning Spherical Journal using Surface Vibration, Airborne Sound and Acoustic Emission. Journal of Physics: Conference Series, 364. 012035. ISSN 1742-6596

Retzer, H., Mishra, Rakesh, Ball, Andrew and Schmidt, K. (2012) Fallback level concepts for conventional and by-wire automotive brake systems. Journal of Physics: Conference Series, 364. 012019. ISSN 1742-6596

Salahat, Mohammed and Wade, Steve (2012) Pedagogical Evaluation of a Domain-Driven Design Framework. UK Academy for Information Systems Conference Proceedings 2012 (48).

Sawsaa, Ahlam and Lu, Joan (2012) Building Information Science ontology (OIS) with Methontology and Protégé. Journal of Internet Technology and Secured Transactions (JITST), 1 (3/4). ISSN 2046-3723

Sawsaa, Ahlam, Zhaozong, Meng and Lu, Joan (2012) Using an Application of Mobile and Wireless Technology in Arabic Learning System. In: Learning with Mobile Technologies, Handheld Devices and Smart Phones: Innovative Methods. IGI Global, pp. 1-21. ISBN 9781466609365

Tesfa, Belachew, Horler, Greg, Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2012) A clamping force measurement system for monitoring the condition of bolted joints on railway track joints and points. Journal of Physics: Conference Series, 364. 012021. ISSN 1742-6596

Tian, X., Gu, Fengshou, Zhen, Dong, Tran, Van Tung and Ball, Andrew (2012) A study on transient enhancement for fault diagnosis based on an active noise control system. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK. (Unpublished)

Wade, Steve and Salahat, Mohammed (2012) Pedagogical Evaluation of a Domain-Driven Design Framework. In: Proceedings of UKAIS 2012. AIS, Oxford, UK.

Wang, R., Gu, Fengshou and Ball, Andrew (2012) Energy recovery system optimisation in automotives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 161. ISBN 978-1-86218-106-9

Zhang, Hongyu, Shi, Zhanqun, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2012) Stability Analysis of a Turbocharger Rotor System Supported on Floating Ring Bearings. Journal of Physics: Conference Series, 364. 012032. ISSN 1742-6596

Zhen, Dong, Wang, T., Gu, Fengshou, Tran, Van Tung and Ball, Andrew (2012) Combustion Analysis of a CI Engine with Biodiesel Blends based on Vibro-Acoustic Measurement. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK. (Unpublished)

Zhu, Fengchun, Li, Hao and Lu, Joan (2012) A Service Level Agreement Framework of Cloud Computing based on the Cloud Bank Model. In: Conference on Computer Science and Automation Engineering (CSAE), 2012 IEEE International. IEEE, London, UK, pp. 255-259. ISBN 978-1-4673-0088-9

2011

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Khalaf, Haifa and Alseddiqi, Mohamed (2011) Blended Learning Tools for Teaching and Training in Higher Order of Thinking Skills (HOTS) within Mechanical Engineering Education. In: COMADEM2011, the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management, 30th May -1st June 2011, Stavanger, Norway. (Unpublished)

Abdusslam, S.A., Ahmed, Mahmud, Raharjo, Parno, Gu, Fengshou and Ball, Andrew (2011) Time Encoded Signal Processing and Recognition of Incipient Bearing Faults. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Abubaker, Azza and Joan, Lu (2011) E-reading strategy model to read E-school book in Libya. In: Proceedings of the International Conference on Internet Computing. ICOMP.

Abubaker, Azza and Lu, Joan (2011) Model of e-reading process for e-school book in Libya. International Journal of Information Retrieval Research, 1 (3). pp. 35-53. ISSN 2155-6377

Abubaker, Azza, Lu, Joan and Wilkinson, Julie (2011) Measuring typographical variables in Arabic script in Reading. In: International Conference on Education and Learning in Mobile Age 2011, 1-2 June 2011, Lake District, UK. (Unpublished)

Ahmed, Mahmud, Abdusslam, S.A., Baqqar, Mabrouka, Gu, Fengshou and Ball, Andrew (2011) Fault Classification of Reciprocating Compressor Based on Neural Networks and Support Vector Machines. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2011) Monitoring Cavitation in Centrifugal Pumps using a Noninvasive Capacitance Sensor. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 875-883. ISBN 0954130723

Alseddiqi, Mohamed and Mishra, Rakesh (2011) Development of a Two-Dimensional Model for Affective Domain Competencies in Engineering Courses. In: COMADEM2011, the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management, 30th May 1st June 2011, Stavanger, Norway. (Unpublished)

Alseddiqi, Mohamed and Mishra, Rakesh (2011) Measuring the effectiveness of an on-line school-to-work transition module. In: The International Conference on E-Learning in the Workplace ICELW 2011, 8th-10th June 2011, Columbia University, New York, USA.

Alwodai, Ahmed, Gu, Fengshou and Ball, Andrew (2011) Motor Current Signature Analysis of a Variable Speed Drive for Motor Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 884-892. ISBN 0954130723

Alwodai, Ahmed, Gu, Fengshou and Ball, Andrew (2011) Motor Current Signature Analysis of a Variable Speed Drive for Motor Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 884-892. ISBN 0954130723

Ammari, Faisal, Joan, Lu and Maher, Abur-rous (2011) Intelligent XML Tag Classification Techniques for XML Encryption Improvement. In: Privacy, Security, Risk and Trust (PASSAT), 2011 IEEE Third International Conference on and 2011 IEEE Third International Confernece on Social Computing (SocialCom). IEEE, pp. 1249-1252. ISBN 9781457719318

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2011) A Novel Approach To Modelling And Simulation Of The Dynamic Behaviour Of The Wheel-Rail Interface. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Asim, Taimoor, Mishra, Rakesh, Saqib, Muhammad and Ubbi, Kuldip (2011) Optimisation of a Capsule Transporting Pipeline Carrying Spherical Capsules. In: Maintenance Performance Measurement and Management 2011, 14-15 December 2011, Lulea, Sweden.

Asim, Taimoor, Mishra, Rakesh, Saqib, Muhammad and Ubbi, Kuldip (2011) Pressure Drop in Capsule Transporting Pipeline Carrying Spherical Capsules. In: 38th National Conference on Fluid Mechanics and Fluid Power, 15-17 December 2011, Bhopal, India.

Baqqar, Mabrouka, Ahmed, Mahmud and Gu, Fengshou (2011) Data Mining for Gearbox Condition Monitoring. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Chen, Wen-hua, Chen, Xun and Xu, Zhijie (2011) Proceedings of the 17th International Conference on Automation & Computing. University of Huddersfield. ISBN 9781862180987

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2011) Diesel engine lubricating oil condition and performance monitoring using acoustic emission measurements. In: 24th International Congress on Condition Monitoring and Diagnostics Engineering Management (COMADEM 2011), 30th May - 1st June 2011, Stavanger, Norway. (Unpublished)

Gu, Fengshou, Shao, Yimin, Naid, A. and Ball, Andrew (2011) Electrical motor current signal analysis using a modified bispectrum for fault diagnosis of downstream mechanical equipment. Mechanical Systems and Signal Processing, 25 (1). pp. 360-372. ISSN 0888-3270

Haram, Mansaf, Wang, Tie, Gu, Fengshou and Ball, Andrew (2011) An Investigation of the Electrical Response of A Variable Speed Motor Drive for Mechanical Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 867-874. ISBN 0954130723

Hu, Lei, Hu, Niaoqing, Qin, Guojun and Gu, Fengshou (2011) Turbopump Condition Monitoring Using Incremental Clustering and One-class Support Vector Machine. Chinese Journal of Mechanical Engineering, 24 (3). pp. 474-489. ISSN 1000-9345

Hu, Niaoqing, Xia, Lurui, Gu, Fengshou and Qin, Guojun (2011) A Novel Transform Demodulation Algorithm for Motor Incipient Fault Detection. IEEE Transactions on Instrumentation and Measurement, 60 (2). pp. 480-487. ISSN 0018-9456

Huang, Y., Tang, S., Bao, C. and Yip, Yau Jim (2011) Steganalysis of compressed speech to detect covert voice over Internet protocol channels. IET Information Security, 5 (1). pp. 26-32. ISSN 17518709

Jiang, Xiang, Cooper, Philip and Scott, Paul J. (2011) Freeform surface filtering using the diffusion equation. Proceedings of the Royal Society, A, 467 (2127). pp. 841-859. ISSN 1364-5021

Joan, Lu, Sundaram, Aswin and Arumugam, Vidyapriyadarshini (2011) Innovative Evaluation System – IESM: An Architecture for the Database Management System for Mobile Application. In: ICOMP'11 - The 2011 International Conference on Internet Computing, July 18-21, 2011, Las Vegas, USA.

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2011) A fast and effective way to improve the merging accuracy of multi-view point cloud data. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield, UK, pp. 18-21. ISBN 978-1-86218-098-7

Lu, Joan (2011) Mobile Assessment System – MES. [Artefact]

Lu, Joan (2011) Student Response System (SRS)/Wireless Response System (WRS) – a Next-Generation Student Response System for Academia and Industry. [Artefact]

Lu, Joan, Sundaram, Aswin, Zhaozong, Meng, Arumugam, Vidyapriyadarshini and Lu, Gehao (2011) Mobile Exam System – MES: Architecture for Database Management. In: The International Conference on Education & Learning in Mobile Age - CELMA, 1st - 2nd June 2011, Lake District, United Kingdom. (Submitted)

Meng, Zhaozong and Lu, Joan (2011) Implementing the Emerging Mobile Technologies in Facilitating Mobile Exam System. In: 2nd International Conference on Networking and Information Technology. IPCSIT 25th-26th November 2011, 17 . IACSIT Press, Hong Kong, China, pp. 80-88. ISBN 978-981-07-0680-7

Meng, Zhaozong and Lu, Joan (2011) Opportunities of Interactive Learning Systems with Evolutions in Mobile Devices: A Case Study. In: Proceedings of the 2011 International Conference on Internet Computing ICOMP 2011. CSREA Press, pp. 238-244. ISBN 1601321864

Oluwajobi, Akinjide O. and Chen, Xun (2011) The Effect of Depth of Cut on the Molecular Dynamics (MD) Simulation of Multi-Pass Nanometric Machining. In: Proceedings of the 17th International Conference on Automation & Computing, 10 September 2011. University of Huddersfield, Huddersfield, UK. ISBN 9781862180987

Oluwajobi, Akinjide O. and Chen, Xun (2011) The Effect of Interatomic Potentials on the Molecular Dynamics Simulation of Nanometric Machining. International Journal of Automation and Computing, 8 (3). pp. 326-332. ISSN 1476-8186

Oluwajobi, Akinjide O. and Chen, Xun (2011) Multi-Pass Nanometric Machining Simulation using the Molecular Dynamics (MD)’. In: ICPM 2011 The 6th International Congress on Precision Machining, 13 - 15 September 2011, Liverpool, UK.

Opoz, Tahsin Tecelli and Chen, Xun (2011) Single Grit Grinding Simulation by Using Finite Element Analysis. Advances in Materials and Processing Technologies AMPT2010 International Conference, 1315 (1). pp. 1467-1472.

Parkinson, Simon, Longstaff, Andrew P., Allen, Gary, Crampton, Andrew, Fletcher, Simon and Myers, Alan (2011) Hierarchical Task Based Process Planning For Machine Tool Calibration. Proceedings of The 29th Workshop of the UK Planning and Scheduling Special Interest Group (PlanSIG2011). pp. 53-60. ISSN 1368-5708

Parkinson, Simon, Longstaff, Andrew P., Crampton, Andrew, Fletcher, Simon, Allen, Gary and Myers, Alan (2011) Representing the Process of Machine Tool Calibration in First-order Logic. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield, UK. ISBN 978-1-86218-098-7

Parkinson, Simon, Longstaff, Andrew P., Fletcher, Simon, Crampton, Andrew, Allen, Gary and Myers, Alan (2011) Cryptographic Techniques in Metrology Software. In: University of Huddersfield Annual Research Festival School of Computing and Engineering 12th March 2010, Friday 12th March 2010, University of Huddersfield. (Submitted)

Rabadi, Yousef (2011) A middleware for distributing XML data between mobile application servers. In: CELMA 2011 - The International Conference on Education & Learning in Mobile Age, June 1 - 2, Lake District - UK.

Raharjo, Parno, Abdusslam, S.A., Gu, Fengshou, Wang, Tie and Ball, Andrew (2011) An Investigation of Acoustic Emission Responses of a Self Aligning Spherical Journal Bearing. In: The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM/MFPT 2011, 20th - 22nd June 2011, Cardiff, UK. (Unpublished)

Sawsaa, Ahlam and Joan, Lu (2011) Virtual community of practice Ontocop: Towards a New model of Information science ontology (ISO). International Journal of Information Retrieval Research, 1 (2). pp. 55-78. ISSN 2155-6377

Sawsaa, Ahlam and Lu, Joan (2011) Extracting Information Science concepts based on Jape Regular Expression. In: Proceedings of the 2011 International Conference on Internet Computing. WORLDCOMP'11 July 18-21, 2011 . CSREA Press, Las Vegas Nevada, USA, pp. 231-238. ISBN 1-60132-186-4

Sawsaa, Ahlam and Lu, Joan (2011) ONTOCOP: Virtual Community Of Practice to build Ontology of Information Science. In: International Conference on Education and Learning in Mobile Age 2011, 1-2 June 2011, Lake District, UK.

Shao, Yimin, Liang, Jie, Gu, Fengshou, Chen, Zaigang and Ball, Andrew (2011) Fault Prognosis and Diagnosis of an Automotive Rear Axle Gear Using a RBF-BP Neural Network. Journal of Physics: Conference Series, 305 (1). 012063. ISSN 1742-6596

Tesfa, Belachew, Mishra, Rakesh, Zhang, Cuiping, Gu, Fengshou and Ball, Andrew (2011) NOx Prediction Based on Cylinder Pressure Measurement for Engine Emission Monitoring. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 1330-1340. ISBN 0954130723

Zhang, Hao, Shi, Zhanqun, Gu, Fengshou and Ball, Andrew (2011) Modelling of Outer and Inner Film Oil Pressure for Floating Ring Bearing Clearance in Turbochargers. Journal of Physics: Conference Series, 305 (1). 012021. ISSN 1742-6596

Zhen, Dong, Alibarbar, A., Zhou, X., Gu, Fengshou and Ball, Andrew (2011) Electrical Motor Current Signal Analysis using a Dynamic Time Warping Method for Fault Diagnosis. Journal of Physics: Conference Series, 305 (1). 012093. ISSN 1742-6596

Zhen, Dong, Gu, Fengshou, Zhou, Xiaojun and Ball, Andrew (2011) Fault Signal Enhancement using Adaptive Filtering Techniques for Gearbox Monitoring. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 251-258. ISBN 0954130723

Zhou, Xiaojun, Shao, Yimin, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2011) Gear Fault Signal Detection based on an Adaptive Fractional Fourier Transform Filter. Journal of Physics: Conference Series, 305 (1). 012022. ISSN 1742-6596

2010

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2010) Learning and Teaching Mechanical Engineering Courses with Blended Learning Environment - Higher Order Application of Bloom’s Taxonomy. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 84-91. ISBN 9781862180932

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2010) Teachers’ Attitude towards Integration of Computer Assisted Instructions in Teaching and Learning Process in CAD/CAM/CNC Module. International Journal of Learning, 16 (12). pp. 137-147. ISSN 1447-9494

Abdulrasool, Salah Mahdi, Mishra, Rakesh and Khalaf, Haifa (2010) Teachers’ and Students' Attitudes Towards Traditional and Computer Assisted Blended Teaching and Learning Processes in Mechanical Engineering Subjects Area. In: Proceedings of the 10th IEEE International Conference on Computer and Information Technology. IEEE Computer Society Conference Publishing Services (CPS), pp. 1436-1441. ISBN 9780769541082

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Khalaf, Haifa and Al Seddiqi, Mohamed (2010) The Effect of Using Computer Technology Tools to Enhance the Teaching-Learning Process in CAD-CAM-CNC Module in Mechanical Engineering Subject Area. In: Global Learn Asia Pacific 2010: Global Conference on Learning and Technology. Association for the Advancement of Computing in Education (AACE), Vancouver, Canada, p. 9. ISBN 1-880094-79-7

Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2010) Bearing fault diagnosis using time encoded signal processing and recognition. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2010) The monitoring of cavitation in centrifugal pumps based on the analysis of vibro-acoustic measurements. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Albarbar, A., Gu, Fengshou and Ball, Andrew (2010) Diesel engine fuel injection monitoring using acoustic measurements and independent component analysis. Measurement, 43 (10). pp. 1376-1386. ISSN 0263-2241

Albarbar, A., Gu, Fengshou, Ball, Andrew and Starr, A. (2010) Acoustic monitoring of engine fuel injection based on adaptive filtering techniques. Applied Acoustics, 71 (12). pp. 1132-1141. ISSN 0003-682X

Alseddiqi, Mohamed and Mishra, Rakesh (2010) A Diagnostic study on the teaching and learning styles in engineering education. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 105-109. ISBN 9781862180932

Alseddiqi, Mohamed, Mishra, Rakesh and Abdulrasool, Salah Mahdi (2010) Developing an assessment strategy for school to work transition module: An example from Technical and Vocational Education(TVE) System in Bahrain. In: International Conference ICL 2010, September 15 -17, 2010, Hasselt, Belgium. (Unpublished)

Alseddiqi, Mohamed, Mishra, Rakesh and Abdulrasool, Salah Mahdi (2010) Improving Teaching and Learning Effectiveness in Engineering Education. The International Journal of Learning, 17 (9). pp. 11-26. ISSN 1447-9494

Alseddiqi, Mohamed, Mishra, Rakesh and Pislaru, Crinela (2010) Design and Development of an On-Line Work-Based Learning (WBL) Module to Enhance the Technical and Vocational Education (TVE) System in Bahrain. In: Global Learn Asia Pacific 2010: Global Conference on Learning and Technology. Association for the Advancement of Computing in Education (AACE), Vancouver, Canada, p. 1168. ISBN 1-880094-79-7

Ammari, Faisal and Lu, Joan (2010) Advanced XML Security: Framework for Building Secure XML Management System (SXMS). In: Information Technology: New Generations (ITNG), 2010 Seventh International Conference on, 12-14 April 2010, Las Vegas - USA.

Appadoo, Robin, Ball, Andrew and Gu, Fengshou (2010) Optimizing condition monitoring techniques applied to a three stage reciprocating compressor in a FMCG industry. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 185. ISBN 9781862180932

Arebi, Lufti, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Investigation of Wireless Sensor Deployed on a Rotating Shaft and Its Potential for Machinery Condition Monitoring. In: 23rd International Congress on Condition Monitoring and diagnostic Engineering Management, June 28-July 2, 2010, Japan. (Unpublished)

Arebi, Lufti, Gu, Fengshou and Ball, Andrew (2010) Rotor Misalignment Detection using a Wireless Sensor and a Shaft Encoder. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 6-13. ISBN 9781862180932

Arebi, Lufti, Gu, J., Ball, Andrew and Gu, Fengshou (2010) Investigation of a Rotating Shaft with a Novel Integrated Wireless Accelerometer. In: The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England, UK.

Arief, Ikhwan and Chen, Xun (2010) Key Parameters In Loose Abrasive Machining. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 1-5. ISBN 9781862180932

Arif, Mohammed, Folkes, Janet and Chen, Xun (2010) Detection of High and Low Temperature in the Grinding Zone using Laser Irradiation Technique. In: 36th International MATADOR Conference 2010, 14th - 16th July 2010, Manchester, UK. (Unpublished)

Baqqar, Mabrouka, Gu, Fengshou and Lu, Joan (2010) Machine Performance and Condition Monitoring Through Data Mining and Database Optimization. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 186. ISBN 9781862180932

Chen, Xun and Opoz, Tahsin Tecelli (2010) Simulation of Grinding Surface Creation – A Single Grit Approach. Advanced Materials Research, 126-28. pp. 23-28. ISSN 1662-8985

Chen, Xun and Opoz, Tahsin Tecelli (2010) Simulation of Grinding Surface Creation – A Single Grit Approach. In: The 13th International Symposium on Advances in Abrasive Technology (ISAAT 2010), 19-22 September 2010, Taipei, Taiwan.

Colley, Gareth, Mishra, Rakesh, Rao, Vasu and Woolhead, R. (2010) Effect of rotor blade position on Vertical Axis Wind Turbine performance. Proceedings of the International Conference on Renewable Energies and Power Quality (ICREPQ’10) Granada (Spain), 23th to 25th March, 2010.

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Detection of Diesel Engine Injector Faults Using Acoustic Emissions. In: COMADEM 2010: Advances in Maintenance and Condition Diagnosis Technologies towards Sustainable Society, 28th June-2nd July 2010, Nara, Japan. (Unpublished)

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Diesel Engine Valve Clearance Detection Using Acoustic Emission. Advances in Mechanical Engineering, 2010. ISSN 1687-8132

Elamin, Fathi, Glikes, O., Gu, Fengshou and Ball, Andrew (2010) The Analysis of Acoustic Emission Signals from the Cylinder Head of a Diesel Engine for Fault Detection. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2010) Diesel Engine Injector Faults Detection Using Acoustic Emissions Technique. Modern Applied Science, 44 (9). pp. 3-13. ISSN 1913-1844

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2010) Online Monitoring of Engine Oil Quality Based on AE Signal Analysis. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 116-123. ISBN 9781862180932

Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Modelling acoustic emissions generated by sliding friction. Wear, 268 (5-6). pp. 811-815. ISSN 0043-1648

Iqbal, Saqib and Allen, Gary (2010) Aspect-Oriented Modelling: Issues and Misconceptions. In: Proceedings of Software Engineering Advances (ICSEA), 2010 Fifth International Conference. IEEE, Nice, France, pp. 337-340. ISBN 978-1-4244-7788-3

Iqbal, Saqib and Allen, Gary (2010) A notational Design of Join Points. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 27-30. ISBN 9781862180932

Kinnear, D., Mishra, Rakesh, Weston, Bill and Padgett, C. (2010) A Design Methodology for the Prediction of Squeeze Film Stiffness and Damping Characteristics in Hybrid Journal Bearings under Pulsatile Load Conditions. International Conference on Renewable Energies and Power Quality (ICREPQ’10) Granada (Spain), 23rd to 25th March, 2010.

Malviya, Vihar, Mishra, Rakesh and Palmer, Edward (2010) CFD Investigation on 3-Dimensional Interference of a Five-Hole Probe in an Automotive Wheel Arch. Advances in Mechanical Engineering, 2010. pp. 1-19. ISSN 1687-8132

Naveed, Munir, Kitchin, Diane E. and Crampton, Andrew (2010) A Hierarchical Task Network Planner for Pathfinding in Real-Time Strategy Games. In: Third International Symposium on AI & Games, AISB 2010 convention, 29 March – 1 April 2010, De Montfort University, Leicester, UK. (Unpublished)

Oluwajobi, Akinjide O. and Chen, Xun (2010) The Effect of Interatomic Potentials on Nanometric Abrasive Machining. In: Proceedings of the 16th International Conference on Automation & Computing, University of Birmingham, Birmingham, UK, 11 September 2010. Chinese Automation and Computing Society in the UK, pp. 130-135. ISBN 9780955529368

Oluwajobi, Akinjide O. and Chen, Xun (2010) On Minimum Depth of Cut in nanomachining. In: Advances in manufacturing technology. Durham University and Glasgow Caledonian University, Durham, pp. 174-179. ISBN 9781905866519

Oluwajobi, Akinjide O. and Chen, Xun (2010) The effect of tool geometry on rubbing and ploughing phenomena in nano abrasive machining. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 160-165. ISBN 9781862180932

Oluwajobi, Akinjide O. and Chen, Xun (2010) The fundamentals of modelling abrasive machining using molecular dynamics. International Journal of Abrasive Technology, 3 (4). pp. 354-381. ISSN 1752-2641

Opoz, Tahsin Tecelli and Chen, Xun (2010) Finite element simulation of chip formation. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 166-171. ISBN 9781862180932

Opoz, Tahsin Tecelli and Chen, Xun (2010) An Investigation of the Rubbing and Ploughing in Single Grain Grinding using Finite Element Method. In: 8th international Conference on Manufacturing Research, 14-16 Sept 2010, Durham, UK.

Opoz, Tahsin Tecelli and Chen, Xun (2010) Material removal phases in single abrasive grain grinding. In: AMPT 2010, October 24-27, Paris. (Unpublished)

Opoz, Tahsin Tecelli and Chen, Xun (2010) Numerical Simulation of Single Grit Grinding. In: Proceeding of the 16th International Conference on Automation & Computing, 11 Sept 2010, Birmingham, UK.

Parkinson, Simon, Longstaff, Andrew P., Fletcher, Simon, Allen, Gary, Crampton, Andrew and Myers, Alan (2010) A novel framework for establishing a machine tool quality metric. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932

Pein, Raoul Pascal and Lu, Joan (2010) Multi-feature query language for image classification. Procedia Computer Science, 1 (1). pp. 2533-2541. ISSN 1877-0509

Pillutla, G., Mishra, Rakesh, Barrans, Simon and Barrans, John (2010) Evaluation of Loss Coefficient For Stand Alone Radiator. In: International Conference on Renewable Energy and Power Quality (ICREPQ'10), 23rd - 25th March 2010, Granada.

Raharjo, Parno, Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2010) Early Failure Detection and Diagnostics of High Speed Self Aligning Journal Bearing. In: COMADEM 2010, June 28-July 2 2010, Nara, Japan. (Unpublished)

Raharjo, Parno, Gu, J., Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Early Failure Detection and Diagnostics of Self-Aligning Journal Bearing through Vibro-acoustic Analysis. In: CM 2010 and MFPT 2010 The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, England. (Unpublished)

Sawsaa, Ahlam and Lu, Joan (2010) Ontocop: A virtual community of practice to create ontology of Information science (IS). In: Proceedings of the 2010 International Conference on Internet Computing. ICOMP 2010. CSREA Press, pp. 260-266. ISBN 160132149x

Sawsaa, Ahlam and Lu, Joan (2010) Ontology of Information Science Based On OWL for the Semantic Web. In: International Arab Conference on Information Technology (ACIT'2010), 14-16 December 2010, University of Garyounis, Benghazi, Libya.

Shao, Yimin, Tu, Wenbing and Gu, Fengshou (2010) A Simulation Study of Defects in a Rolling Element Bearing using FEA. In: International Conference on Control, Automation and Systems 2010, 27th - 30th October 2010, Gyeonggi-do, Korea. (Unpublished)

Shi, John Z., Legate, I., Gu, Fengshou, Fieldhouse, John D. and Ball, Andrew (2010) Prediction of antilock braking system condition with the vehicle stationary using a model-based approach. International Journal of Automotive Technology, 11 (3). pp. 363-373. ISSN 1229-9138

Singh, D., Elamin, Fathi, Gu, Fengshou, Gilkes, Oliver S., Fieldhouse, John D., Jain, A.K., Singh, Nishan and Singal, S.K. (2010) Study of friction characteristics of a diesel engine running on different viscosity grade engine oils using conventional and acoustic emissions technique. In: 7th International Conference on Industrial Tribology (ICIT 2010), 2nd - 4th December 2010, Ranchi, India. (Unpublished)

Tesfa, Belachew, Mishra, Rakesh and Gu, Fengshou (2010) Behavior of a CI Engine Running by Biodiesel under Transient Conditions. In: General Emisions. SAE Special Publication Papers SP, 2010 (2290). SAE International, Michigan, USA.

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Powles, Nicholas (2010) Prediction Models for Density and Viscosity of Biodiesel and their Effects on Fuel Supply System in CI Engines. Renewable Energy, 35 (12). pp. 2752-2760. ISSN 0960-1481

Wilkinson, Adam, Chen, Xun and Blunt, Liam (2010) Experimentation to Reduce Friction from Novel Abrasive Tape Polishing Method. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 54-59. ISBN 9781862180932

Yeung, Ka Yiu and Chen, Xun (2010) 3-D Fixture Layout Design System Based on Genetic Algorithm. Proceedings of the 16th International conference on Automation & Computing. pp. 238-243. ISSN 9780955529368

Zhang, H., Shi, John Z., Gu, Fengshou and Ball, Andrew (2010) The bending vibration of a turbocharger under the influence of rotor imbalance. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Zhang, Hao, Shi, John Z., Gu, Fengshou and Ball, Andrew (2010) Bending vibration of an automotive turbocharger under the influence of rotor imbalance. In: CM 2010 and MFPT 2010 The 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England. (Unpublished)

Zhang, Zhiyong, Lu, Joan and Yip, Yau Jim (2010) Automatic Detection of Pectoral Muscle with the Maximum Intensity Change Algorithm. In: Research and Development in Intelligent Systems. Springer. ISBN 0857291297

Zhang, Zhiyong, Lu, Joan and Yip, Yau Jim (2010) Automatic Segmentation for Breast Skin-line. In: Proceedings of the 2010 10th IEEE International Conference on Computer and Information Technology. IEEE, pp. 1599-1604. ISBN 9780769541082

Zhen, Dong, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) A Study of Sound Source Characteristics in Active Noise Control and Fault Diagnosis. In: Inter noise 2010-39th International congress on Noise Control Engineering, 13-16 June 2010, Lisbon, Portugal. (Unpublished)

Zhen, Dong, Gu, Fengshou and Ball, Andrew (2010) The Study of Acoustic Source Localization using a Small Microphone Array for Condition Monitoring. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 14-19. ISBN 9781862180932

2009

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2009) Teacher Attitudes toward and Perceptions of Mechanical Engineering Student Performance on CAD/CAM/CNC. In: Learning: the sixteenth international conference on Learning, 1-4 July 2009, University of Barcelona, Spain. (Unpublished)

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2009) Using Computer Technology Tools to Improve the Teaching-Learning Process in Technical and Vocational Education: Mechanical Engineering Subject Area. International Journal of Learning, 15 (12). pp. 155-168. ISSN 1447-9494

Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2009) Bearing fault diagnosis based on vibration signals. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 93-98. ISBN 9781862180857

Al-Arbi, Salem, Gu, Fengshou, Guan, Luyang and Ball, Andrew (2009) Remotely gear condition monitoring using traditional signal processing techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 111-117. ISBN 9781862180857

Al-Arbi, Salem, Gu, Fengshou, Guan, Luyang, Ball, Andrew and Naid, A. (2009) Gearbox Fault Diagnosis based on Vibration Signals Measured Remotely. Key Engineering Materials, 413-41. pp. 175-180. ISSN 1013-9826

Al-Hamadani, Baydaa T., Alwan, Raad F., Lu, Joan and Yip, Yau Jim (2009) Vague Content and Structure (VCAS) Retrieval for XML Electronic Healthcare Records (EHR). In: ICOMP'09 International Conference of Internet Computing, 13th - 16th July 2009, Las Vegas, Nevada, USA. (Unpublished)

Alabed, Asmaa and Chen, Xun (2009) Development of a knowledge warehouse for grinding. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 99-104. ISBN 9781862180857

Alabed, Asmaa and Chen, Xun (2009) Web-Based Knowledge Warehouse Development 2. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Ali, Jafar, Fieldhouse, John D., Talbot, Chris J. and Mishra, Rakesh (2009) Thermal discharge of warm water into cooler stagnant water. In: What Where When: Multi-dimensional Advances for Industrial Process Monitoring. Proceedings. University of Leeds, Leeds, pp. 227-238.

Ali, Jafar, Fieldhouse, John D., Talbot, Chris J. and Mishra, Rakesh (2009) The diffusion of thermal discharge into stagnant water. In: Sixth international conference on flow dynamics, 4-6 November 2009, Sendai, Japan. (Unpublished)

Alseddiqi, Mohamed, Mishra, Rakesh and Pislaru, Crinela (2009) Identification of skills gap between school-based learning and work-based learning in technical and vocational education in Bahrain. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, UK, pp. 118-123. ISBN 9781862180857

Birger Stav, John, Engh, E., Thorseth, Trond M., Bergh, R., Ameson, K. and Lu, Joan (2009) Exploiting novel iSelect learning objects to foster inquiry and problem based learning in skills upgrading processes. In: INTED 2009. International Technology, Education and Development Conference, 9th - 11th of March, 2009, Valencia, Spain.

Charles, Peter, Sinha, Jyoti K., Gu, Fengshou, Lidstone, Liam and Ball, Andrew (2009) Detecting the crankshaft torsional vibration of diesel engines for combustion related diagnosis. Journal of Sound and Vibration, 321 (3-5). pp. 1171-1185. ISSN 0022-460X

Chen, Xun (2009) Corrective Abrasive Polishing Processes for Freeform Surface. Key Engineering Materials, 404. pp. 103-112. ISSN 1013-9826

Chen, Xun and Griffin, James Marcus (2009) Grinding Burn and Chatter Classification Using Genetic Programming. Key Engineering Materials, 389-39. pp. 90-95. ISSN 1662-9795

Colley, Gareth, Mishra, Rakesh, Rao, H.V. and Woolhead, R. (2009) Performance evaluation of three cross flow vertical axis wind turbine configurations. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 130-136. ISBN 9781862180857

Colley, Gareth, Mishra, Rakesh, Rao, Vasu and Woolhead, R. (2009) Effect of External Structures on Vertical Axis Wind Turbine Flow Field. Proceedings of the National Conference on Fluid Mechanics & Fluid Power, December 17-19,2009,College of Engineering,Pune.

Duan, Wenbo, Gu, Fengshou, Dupère, Iain, Zhong, Shan and Ball, Andrew (2009) The Effects of Blockage on the Propagation of Acoustic Waves in the Liquid-Shell Coupled System. Key Engineering Materials, 413-41. pp. 327-333. ISSN 1013-9826

Dweib, Ibrahim, Awadi, Ayman and Lu, Joan (2009) MAXDOR: Mapping XML Document into Relational Database. The Open Information Systems Journal, 3 (2). pp. 108-122. ISSN 1874-1339

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2009) Detection of diesel engine valve clearance by acoustic emission. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 7-13. ISBN 9781862180857

Fan, Yibo, Gu, Fengshou and Ball, Andrew (2009) Acoustic Emission Monitoring of Mechanical Seals Using MUSIC Algorithm based on Higher Order Statistics. Key Engineering Materials, 413-41. pp. 811-816. ISSN 1013-9826

Fazenda, Bruno, Gu, Fengshou, Ball, Andrew and Guan, Luyang (2009) Noise source localisaton in a car environment. In: 8th International Conference on Damage Assessment of Structures, 3-5 August 2009, Beijing, China. (Unpublished)

Gilkes, Oliver S., Mishra, Rakesh, Fieldhouse, John D. and Rao, Vasu (2009) Unsteady Interaction Of Turbocharger Compressor With IC Engine. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Griffin, James Marcus and Chen, Xun (2009) Characteristics of the acoustic emission during horizontal single grit scratch tests: Part 2 classification and grinding tests. International Journal of Abrasive Technology, 2 (1). pp. 43-59. ISSN 1752-2641

Griffin, James Marcus and Chen, Xun (2009) Characteristics of the acoustic emission during horizontal single grit scratch tests: Part 1 characteristics and identification. International Journal of Abrasive Technology, 2 (1). pp. 25-42. ISSN 1752-2641

Griffin, James Marcus and Chen, Xun (2009) Multiple classification of the acoustic emission signals extracted during burn and chatter anomalies using genetic programming. International Journal of Advanced Manufacturing Technology, 45 (11-12). pp. 1152-1168. ISSN 0268-3768

Gu, Fengshou, Naid, A., Hu, Niaoqing, Shao, Yimin, Mishra, Rakesh, Stubbs, Christopher and Ball, Andrew (2009) Electrical Motor Current Signal Analysis using Modified Bispectrum for Fault Diagnosis of Reciprocating Compressors. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Guan, Luyang, Gu, Fengshou, Shao, Yimin, Mishra, Rakesh and Ball, Andrew (2009) Empirical Mode Decomposition Based Method for Fault Diagnosis in a Helical Gearbox. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Iqbal, Saqib and Allen, Gary (2009) Aspect-oriented design model. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 137-141. ISBN 9781862180857

Iqbal, Saqib and Allen, Gary (2009) On identifying and representing aspects. In: SERP'09 - The 2009 International Conference on Software Engineering Research and Practice, July 13-16, Las Vegas.

Iqbal, Saqib and Allen, Gary (2009) Representing Aspects in Design. In: Theoretical Aspects of Software Engineering, 2009 TASE 2009, Third IEEE International Symposium on. IEEE, Tianjin, China, pp. 313-314. ISBN 978-0-7695-3757-3

Liu, Baolong, Lu, Joan and Yip, Yau Jim (2009) XML Data Integrity Based on Concatenated Hash Function. International Journal of Computer Science and Information Security, 1 (1). pp. 31-40. ISSN 1947-5500

Liu, Baolong, Lu, Joan and Yip, Yau Jim (2009) A series-parallel XML multisignature scheme for XML data authentication. International Journal of Computer Science and Network Security, 9 (2). pp. 236-247. ISSN 1738-7906

Lu, Gehao, Lu, Joan, Yao, Shaowen and Yip, Yau Jim (2009) A Review on Computational Trust Models for Multi-agent Systems. The Open Information Science Journal, 2. pp. 18-25. ISSN 1874-947X

Lu, Joan (2009) Editorial: Message From Guest Editor. The Open Information Science Journal, 2. p. 1. ISSN 1874-947X

Lu, Joan (2009) Editorial: XML technologies and Data Mining. The Open Information Systems Journal, 3 (2). p. 68. ISSN 1874-1339

Lu, Joan and Cripps, Nathan (2009) XML Security in Certificate Management - XML Certificator. The Open Information Science Journal, 2. pp. 10-17. ISSN 1874-947X

Lu, Joan and Wang, Lizhen (2009) Efficient Spatial Patterns Mining and Inside Stories. Elliott & Fitzpatrick, Inc., Athens, Georgia, USA. ISBN 978-0-9798786-7-1

Lu, Joan and Weeks, Rob (2009) An Investigation in XML Based Scientific Data Visualization. In: ICOMP'09 International Conference of Internet Computing, 13th - 16th July 2009, Las Vegas, Nevada, USA. (Unpublished)

Lu, Zhongyu (2009) An Introduction to Contemporary Computing with XML in Science and Technology, Natural Language Engineering & Machine Learning and Self Adaptive Systems Pervasive Computing. Elliott & Fitzpatrick, Inc., Athens, USA. ISBN 978-0-9798786-3-3

Malviya, Vihar, Gundala, Naresh and Mishra, Rakesh (2009) Effect of cross wind on aerodynamic coefficients of ground vehicles. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 19-25. ISBN 9781862180857

Malviya, Vihar, Mishra, Rakesh and Fieldhouse, John D. (2009) CFD Investigation of a Novel Fuel-Saving Device for Articulated Tractor-Trailer Combinations. Engineering Applications of Computational Fluid Mechanics, 3 (4). pp. 587-607. ISSN 1994-2060

Malviya, Vihar, Mishra, Rakesh and Fieldhouse, John D. (2009) Enhanced analytical vehicle stability model. In: Proceedings of the 12th EAEC European Automotive Congress 2009. EAEC. ISBN 9788096924387

Malviya, Vihar, Mishra, Rakesh and Gundala, Naresh (2009) CFD-Based Modelling of the Variation of Aerodynamic Coefficients with Wind Angle. In: Proceeding of National Conference on Fluid Mechanics & Fluid Power 17-19 December 2009. College of Engineering Pune, Pune, India.

Mishra, Rakesh, Alseddiqi, Mohamed and Pislaru, Crinela (2009) An Improved Employability Skills Model and its Compliance Through Vocational Educational System in Bahrain. The International Journal of Learning, 16 (9). pp. 699-718. ISSN 1447-9494

Mishra, Rakesh, Alseddiqi, Mohamed and Pislaru, Crinela (2009) An improved employability skills model and its compliance through vocational educational system. In: Learning: the sixteenth international conference on Learning, 1-4 July 2009, University of Barcelona, Spain. (Unpublished)

Mishra, Rakesh, Barrans, Simon and Pislaru, Crinela (2009) Imparting psychomotor skills to the learners using computer aided instructions in Engineering Education. In: V International Conference on Multimedia and Information and Communication Technologies in Education, 22-24 April 2009, Lisbon, Portugal. (Unpublished)

Mishra, Rakesh, Gu, Fengshou, Fazenda, Bruno, Stubbs, Christopher and Ball, Andrew (2009) Measurement and Characterisation of Faults in the Intake System of a Turbocharged Engine Using a Directional Acoustic Probe. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Naid, A., Gu, Fengshou, Shao, Yimin, Al-Arbi, Salem and Ball, Andrew (2009) Bispectrum Analysis of Motor Current Signals for Fault Diagnosis of Reciprocating Compressors. Key Engineering Materials, 413-41. pp. 505-511. ISSN 1013-9826

Naveed, Munir, Kitchin, Diane E. and Crampton, Andrew (2009) Dynamic real-time hierarchical heuristic search for pathfinding. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 153-158. ISBN 9781862180857

Obi, Stanley, Chen, Xun and Blunt, Liam (2009) Effect of polishing angle on material removal rate and surface finish using bonded abrasive pads. In: Lamdamap 9th International Conference, 30th June – 2nd July 2009, Brunel University. (Unpublished)

Oluwajobi, Akinjide O. and Chen, Xun (2009) Cellular automata modelling of micro abrasive machining. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 159-164. ISBN 9781862180857

Oluwajobi, Akinjide O. and Chen, Xun (2009) Simulation of Abrasive Machining Using Molecular Dynamics. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Opoz, Tahsin Tecelli and Chen, Xun (2009) Finite element simulation of grinding process and micro-scale abrasive wear. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 165-171. ISBN 9781862180857

Palmer, Edward, Mishra, Rakesh and Fieldhouse, John D. (2009) An optimization study of a multiple-row pin-vented brake disc to promote brake cooling using computational fluid dynamics. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 223 (7). pp. 865-875. ISSN 0954-4070

Pein, Raoul Pascal, Lu, Joan and Stav, John Birger (2009) Integrating Mobile Computing Solutions into Distance Learning Environments. In: International Conference on Mobile Communications and Pervasive Computing (MCPC 2009), 23rd-25th March 2009, Leipzig, Germany.

Pein, Raoul Pascal, Lu, Joan and Stav, John Birger (2009) An Investigation in Image Retrieval for Analysing Welding Defects. In: The 2009 Infoscience, Infoengineering and Infotechnology Forum (Infosci 2009), 23rd-25th March 2009, Leipzig, Germany. (Unpublished)

Pein, Raoul Pascal, Lu, Joan, Stav, John Birger and Uran, Miro (2009) An Investigation in Applying Image Retrieval Techniques to X-Ray Engineering Pictures. In: The 8th WSEAS International Conference on Artificial Intelligence, Knowledge Engineering and Data Bases, February 21st-23rd 2009, Cambridge, UK. (Submitted)

Pein, Raoul Pascal, Lu, Joan, Stav, John Birger, Xu, Qiang, Uran, Miro and Mráz, Luboš (2009) An Intelligent System for Analyzing Welding Defects using Image Retrieval Techniques. In: 19th International Conference on Flexible Automation and Intelligent Manufacturing 2009 (FAIM 2009). Curran Associates, pp. 939-946. ISBN 9781615676279

Pillutla, G., Mishra, Rakesh, Barrans, Simon and Barrans, J (2009) Experimental and numerical prediction of airflow in a room - literature summary. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 172-177. ISBN 9781862180857

Pislaru, Crinela and Mishra, Rakesh (2009) Using VLEs to support student centred learning in control engineering education. In: 5th International Conference on Multimedia and Information Communication Technologies in education - m-ICTE2009 Conference, 22nd-24th April 2009, Lisbon, Portugal. (Unpublished)

Rabadi, Y.E. and Lu, Joan (2009) Building secured XML real-time interactive data exchange architecture - a comparison test between TCP vs. UDP protocols performance/. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 178-183. ISBN 9781862180857

Sawsaa, Ahlam (2009) A Generic Model Of Knowledge Mapping Through Virtual Communities Of Practice In Information Technology. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Sawsaa, Ahlam and Joan, Lu (2009) A Generic model of knowledge mapping through Virtual Communities of Practice in Information Science. In: Proceedings of the 2009 International Conference on Internet Computing. ICOMP 2009. CSREA Press, pp. 234-240. ISBN 1601320922

Shi, John Z., Gu, Fengshou, Lennox, Barry and Ball, Andrew (2009) A Grey-box Modelling and Its Application in Model-based Fault Detection. International Journal of COMADEM, 12 (1). pp. 21-30. ISSN 1363-7681

Tang, Shanyu, YongFeng, Huang and Yip, Yau Jim (2009) Performance of Database Driven Network Applications from the User Perspective. KSII Transactions on Internet and Information Systems, 3 (3). pp. 235-250. ISSN 19767277

Tecelli Opoz, Tahsin and Chen, Xun (2009) Robotic Grinding and Polishing Process Technology. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Tesfa, Belachew, Mishra, Rakesh and Gu, Fengshou (2009) Performance of Compression Ignition (CI) Engine Running on Biodiesel during Transient Condition. In: Thirty Sixth National Conference on Fluid Mechanics and Fluid Power, 17- 19 December 2009, Pune, India.

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Condition Monitoring of CI engine running on Biodiesel using Transient Process. Key Engineering Materials, 413-14. pp. 495-503. ISSN 1013-9826

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Predicting specific gravity and viscosity of biodiesel fuels. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 38-44. ISBN 9781862180857

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Transient process modeling for condition monitoring of compression ignition (CI) engine. In: Proceedings of the 12th EAEC European Automotive Congress 2009. European Automotive Congress. ISBN 9788096924387

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Fieldhouse, John D. (2009) Investigation Of Transient Characteristics For Performance Improvement And Health Monitoring For a CI Engine Running Biodiesel. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Treetrong, Juggrapong, Sinha, Jyoti K., Gu, Fengshou and Ball, Andrew (2009) Bispectrum of stator phase current for fault detection of induction motor. ISA Transactions, 48 (3). pp. 378-382. ISSN 0019-0578

Wade, Steve and Salahat, Mohammed (2009) Application of a Systemic Soft Domain-Driven Design Framework. Proceedings of the World Academy of Science, Engineering and Technology, (57). pp. 476-486. ISSN 2070-3724

Wade, Steve and Salahat, Mohammed (2009) A Systems Thinking Approach to Domain- Driven Design. In: UK Academy for Information Systems Conference Proceedings 2009. UK Academy for Information Systems, London, UK.

Wang, Jing, Xu, Zhijie, Pickering, Jonathan and Mishra, Rakesh (2009) Spatio-Temporal Volume Based Video Event Detection. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Wang, Lizhen, Bao, Yuzhen and Lu, Joan (2009) Efficient Discovery of Spatial Co-Location Patterns Using the iCPI-tree. The Open Information Systems Journal, 3 (2). pp. 69-80. ISSN 1874-1339

Wang, Lizhen, Zhou, Lihua, Lu, Joan and Yip, Yau Jim (2009) An order-clique-based approach for mining maximal co-locations. Information Sciences, 179 (19). pp. 3370-3382. ISSN 00200255

Xu, Qiang and Lu, Joan (2009) A review of finite element analysis of metal cutting. In: FAIM 2009 Flexible Automation and Intelligent Manufacturing 19th International Conference, 6th - 8th July 2009, University of Teeside, Middlesbrough, UK. (Unpublished)

Zhang, H., Shi, John Z., Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2009) Model-based Fault Detection for a Turbocharger. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

2008

Abdusslam, S.A., Ball, Andrew and Gu, Fengshou (2008) Diagnosis and Prognosis of Machinery Health based on Advanced Intelligent Computations. In: University of Huddersfield Research Festival 2008, 25 Feb-13 March 2008, Huddersfield. (Unpublished)

Abubaker, Azza, Lu, Joan and Yip, Yau Jim (2008) Framework to design new model of E-journals. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 93-99. ISBN 978-1-86218-067-3

Alabed, Asmaa and Chen, Xun (2008) Grinding knowledge sharing through a knowledge warehouse development. In: 6th International Conference on Manufacturing Research (ICMR 2008), 9th - 11th September 2008, Brunel University, London, UK. (Unpublished)

Bryant, David, Fieldhouse, John D., Crampton, Andrew and Talbot, Chris J. (2008) Hot Judder Investigations Using a High Speed Brake Dynamometer. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Bryant, David, Fieldhouse, John D., Crampton, Andrew, Talbot, Chris J. and Layfield, Jonathan (2008) Thermal Brake Judder Investigations Using a High Speed Dynamometer. In: Brake Technology, 2008. SAE. ISBN 978-0-7680-2030-4

Chen, Xun (2008) Machining Dynamics in Grinding Processes. In: Machining Dynamics: Fundamentals, Applications and Practices. Springer Series in Advanced Manufacturing . Springer, London, pp. 233-262. ISBN 978-1-84628-367-3

Chen, Xun and Griffin, James Marcus (2008) Grinding burn and chatter classification using genetic programming. Key Engineering Materials, 389-39. pp. 90-95. ISSN 1013-9826

Dweib, Ibrahim, Awadi, Ayman, Elrhman, Seif Elduola Fath and Lu, Joan (2008) Schemaless approach of mapping XML document into Relational Database. 8th IEEE International Conference on Computer and Information Technology, 2008. CIT 2008. pp. 167-172.

Elhaj, M., Gu, Fengshou, Ball, Andrew, Albarbar, A., Al-Qattan, M. and Naid, A. (2008) Numerical Simulation and Experimental Study of a Two Stage Reciprocating Compressor for Condition Monitoring. Mechanical Systems and Signal Processing, 22 (2). pp. 374-389. ISSN 08883270

Fazenda, Bruno, Gu, Fengshou, Ball, Andrew and Gilkes, Oliver S. (2008) Acoustic diagnosis of driving belt physical condition in enclosures. In: INTER-NOISE 2008, the 37th International Congress and Exposition on Noise Control Engineering, 26-29 October 2008, Shanghai, China.

Fieldhouse, John D., Bryant, David, Crampton, Andrew, Talbot, Chris J. and Layfield, Jonathan (2008) A study of thermal judder on a laboratory dynamometer. In: SAE Brake Colloquium & Engineering Display, October 2008, San Antonio USA.

Gilkes, Oliver S., Mishra, Rakesh and Fieldhouse, John D. (2008) Simulation of the Transient Performance of a Turbocharged Diesel Engine Featuring a Two Point Air Injection Transient Assist System. Working Paper. SAE International, London, UK.

Gilkes, Oliver S., Mishra, Rakesh, Fieldhouse, John D. and Rao, H.V. (2008) Transient response of turbocharged diesel engine for transient operation using air injection assist system. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Hussain, Shahnawaz and Chen, Xun (2008) Remote milling tool-wear monitoring and direct wear features extraction by image processing. International Journal of Internet Manufacturing and Services, 1 (3). pp. 246-261. ISSN 1751-6048

Jang, J., Gu, Fengshou, Gennish, R., Moore, Jonathan P., Harris, G. and Ball, Andrew (2008) Monitoring of Diesel Engine Combustions Based on the Acoustic Source Characterisation of the Exhaust System. Mechanical Systems and Signal Processing, 22 (6). pp. 1465-1480. ISSN 08883270

Jiang, Xiang, Gu, Fengshou and Ball, Andrew (2008) Automotive Diesel Engine Performance and Condition Monitoring using Downpipe Acoustic Waveform Analysis. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Li, Hao, Liu, Yu, Lu, Joan and Yao, Shaowen (2008) OLAP model system for reporting use. In: Proceedings of the 14th International Conference on Automation and Computing (ICAC 2008). IEEE. ISBN 9780955529320

Li, Hao, Lu, Joan, Cai, Binjing and Yao, Shaowen (2008) Study on SOA-Orient WebGIS framework. In: Proceedings of the 14th International Conference on Automation and Computing. IEEE. ISBN 9780955529320

Li, Hao, Lu, Joan and Lu, Gehao (2008) The study and actualization of key technologies in WebGIS based on XML. In: Proceedings of the 2008 International Conference on Internet Computing, ICOMP 2008. CSREA Press, pp. 310-315. ISBN 1601320736

Li, Hao, Zhong, Yong, Lu, Joan and Zhang, Xuejie (2008) A banking based grid recourse allocation scheduling. The 3rd International Conference on Grid and Pervasive Computing Workshops, 2008. GPC Workshops '08. pp. 239-244.

Liu, Qiang, Chen, Xun, Wang, Yan and Gindy, Nabil (2008) Empirical modelling of grinding force based on multivariate analysis. Journal of Materials Processing Technology, 203 (1-3). pp. 420-430. ISSN 0924-0136

Lu, Gehao, Lu, Joan, Yao, Shaowen and Yip, Yau Jim (2008) Investigation on FIPA Agent Communication Mechanism Based on Web Service. In: Proceedings of the 2008 International Conference on Internet Computing, ICOMP 2008. CSREA Press, pp. 316-320. ISBN 1601320736

Lu, Gehao, Lu, Joan, Yao, Shaowen and Yip, Yau Jim (2008) Investigation on FIPA agent communication mechanism based on web service. In: Proceedings of the 2008 International Conference on Internet Computing, ICOMP 2008. CSREA Press, pp. 316-320. ISBN 1601320736

Lu, Gehao, Lu, Joan and Yip, Yau Jim (2008) Mobile agent based data fusion for wireless sensor networks with a XML framework. In: Proceedings of the 2008 International Conference on Internet Computing, ICOMP 2008. CSREA Press, pp. 298-303. ISBN 1601320736

Lu, Joan and Cripps, Nathan (2008) Understanding XML security with a case study. In: Proceedings of the 2008 International Conference on Internet Computing, ICOMP 2008. CSREA Press, pp. 291-297. ISBN 1601320736

Malviya, Vihar, Mishra, Rakesh and Fieldhouse, John D. (2008) Comparative computational analysis of drag-reducing devices for tractor-trailers. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 1-8. ISBN 978-1-86218-067-3

Mishra, Rakesh (2008) A model for the prediction of pressure drop in a two dimensional rectangular duct carrying a solid-liquid mixture. In: Bulk Europe 2008, 16th-17th October 2008, Prague, Czeck Republic. (Unpublished)

Oluwajobi, Akinjide O. and Chen, Xun (2008) Modelling abrasive machining techniques using molecular dynamics. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 100-105. ISBN 978-1-86218-067-3

Palmer, Edward, Mishra, Rakesh, Bryant, David and Fieldhouse, John D. (2008) Analysis of air flow and heat dissipation from a high performance GT car front brake. In: SAE International Congress 2008, April 2008, Detroit USA.

Palmer, Edward, Mishra, Rakesh and Fieldhouse, John D. (2008) A computational fluid dynamic analysis on the effect of front row pin geometry on the aerothermodynamic properties of a pin-vented brake disc. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 222 (7). pp. 1231-1245. ISSN 0954-4070

Pein, Raoul Pascal, Amador, Milton, Lu, Joan and Renz, Wolfgang (2008) Using CBIR and semantics in 3D-model retrieval. In: 2008 8th IEEE International Conference on Computer and Information Technology. IEEE, pp. 173-178. ISBN 9781424423576

Pein, Raoul Pascal, Lu, Joan and Renz, Wolfgang (2008) An Extensible Query Language for Content Based Image Retrieval. The Open Information Systems Journal, 3 (17). pp. 81-97. ISSN 1874-1339

Pein, Raoul Pascal, Lu, Joan and Renz, Wolfgang (2008) An extensible query language for content based image retrieval based on Lucene. In: 2008 8th IEEE International Conference on Computer and Information Technology. IEEE, pp. 179-184. ISBN 9781424423576

Rashid, Baydaa T., Alwan, Raad F., Lu, Joan and Yip, Yau Jim (2008) Recent development in XML-IR. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 106-109. ISBN 978-1-86218-067-3

Salahat, Mohammed, Wade, Steve and Lu, Joan (2008) A systemic framework for business process modelling and implementation. In: Innovations '08: 5th International Conference on Innovations in Information Technology, 16th - 18th December 2008, Al Ain, Dubai.

Shi, John Z., Legate, I., Gu, Fengshou, Fieldhouse, John D. and Ball, Andrew (2008) Model-based fault prediction of ABS system with vehicle stationary. In: Proceedings of the third world congress on engineering asset management and intelligent maintenance systems conference. Springer.

Wang, Jing, Xu, Zhijie, Pickering, Jonathan and Mishra, Rakesh (2008) An innovative volume based video feature extraction technique. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 110-116. ISBN 978-1-86218-067-3

Wang, Lizhen, Bao, Yuzhen, Lu, Joan and Yip, Yau Jim (2008) A Web-Based Visual Spatial Co-Location Patterns' Mining Prototype System (SCPMiner). In: Proceedings of the International Conference on Cyberworlds 2008. IEEE, pp. 675-681. ISBN 9780769533810

Wang, Lizhen, Bao, Yuzhen, Lu, Joan and Yip, Yau Jim (2008) A new join-less approach for co-location pattern mining. In: 2008 8th IEEE International Conference on Computer and Information Technology. IEEE, pp. 197-202. ISBN 9781424423576

Wang, Y., Chen, Xun, Gindy, Nabil and Xie, J. (2008) Elastic deformation of a fixture and turbine blades system based on finite element analysis. International Journal of Advanced Manufacturing Technology, 36 (3-4). pp. 296-304. ISSN 0268-3768

Xue, Gang, Lu, Joan, Gong, Ning and Yao, Shaowen (2008) Investigating workflow resource patterns in term of Pi-calculus. 12th International Conference on Computer Supported Cooperative Work in Design, 2008. CSCWD 2008. pp. 630-635.

Zhang, Zhiyong, Lu, Joan and Yip, Yau Jim (2008) Computer aided mammography. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 125-130. ISBN 978-1-86218-067-3

Zhang, Zhiyong, Lu, Joan and Yip, Yau Jim (2008) A Review of Medical Image Annotation. In: Proceedings of the 14th International Conference on Automation and Computing (ICAC '08). IEEE. ISBN 9780955529320

2007

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Fieldhouse, John D., Ward, Steve and McComish, John (2007) Effectiveness of Computer Assisted Laboratory Instructions:Learning Outcomes Analysis. International Journal of Learning, 14 (8). pp. 197-209. ISSN 1447-9494

Chakraborty, A., Mishra, Rakesh and Majumdar, B. (2007) A computational approach to analyze the flow pattern in a Y-Duct due to different manoeuvring conditions. In: International Aerospace CFD Conference, 18th-19th June, 2007, Paris, France.

Che, Y., Long, Hua, Lu, Joan and Yip, Yau Jim (2007) An Investigation in Self-Similar Study and Implication of 3G Mobile Traffic. In: The 2007 World Congress in Computer Science, Computer Engineering, & Applied Computing, 25 - 28th June, 2007, Las Vegas, Nevada, USA.

Che, Yi, Long, Hua, Lu, Joan and Yip, Yau Jim (2007) An Investigation in Self-Similar Study and Implication of 3G Mobile Traffic. In: CIC'07- The 2007 International Conference on Communications in Computing, 25th - 28th June 2007, Monte Carlo Resort, Las Vegas, Nevada, USA. (Unpublished)

Chen, Xun and Griffin, James Marcus (2007) The Classification of rubbing, ploughing and cutting during grinding and the comparison of different evolutionary inspired classification techniques. In: 40th CIRP International Seminar on Manufacturing Systems, 30th May - 1st June 2007, Liverpool, UK. (Unpublished)

Chen, Xun and Griffin, James Marcus (2007) Grinding acoustic emission classification in terms of mechanical behaviours. Key Engineering Materials, 329. pp. 15-20. ISSN 1662-9795

Chen, Xun, Griffin, James Marcus and Liu, Qiang (2007) Mechanical and thermal behaviours of grinding acoustic emission. International Journal of Manufacturing Technology and Management, 12 (1/2/3). pp. 184-199. ISSN 1368-2148

Chen, Xun and Limchimchol, Thitikorn (2007) Grinding chatter monitoring using least square support vector machine. In: International Symposium on Advances in Abrasive Technology (ISAAT 2007), 26th - 28th Septmeber 2007, Dearborn, Michigan, USA. (Unpublished)

Crampton, Andrew, Talbot, Chris J. and Terry, J.L. (2007) Feature Extraction and Parameter Estimation as a Tool for Acoustical Analysis. In: Curve and Surface Fitting: Avignon 2006. Nashboro Press, Brentwood, TN, pp. 81-90. ISBN 978-0-9728482-8-2

El Haj, Seif El Duolaf, Lu, Joan and Yip, Yau Jim (2007) Indexing Technique for XML Documents. In: Proceedings of the 2007 International Conference on Internet Computing, ICOMP 2007. CSREA Press. ISBN 1-60132-044-2

Elshanti, Ali, Shi, John Z., Badri, A, Gu, Fengshou and Ball, Andrew (2007) Model-based Fault Detection and Diagnosis of the Anti-lock Braking System. In: Second World Congress of Asset Management and the Fourth International Conference on Condition Monitoring (WCEAM), June 2007, Harrogate, UK.

Feng, Zhengming and Chen, Xun (2007) Image processing of grinding wheel surface. International Journal of Advanced Manufacturing Technology, 32 (1-2). pp. 27-33. ISSN 0268-3768

Fieldhouse, John D., Bryant, David, Palmer, Edward and Mishra, Rakesh (2007) A study of the thermo-elastic effects of braking on high performance cars. In: 21st JUMV International Automotive Conference - Science and Motor Vehicles, 23-25th April 2007, Belgrade, Serbia.

Fieldhouse, John D. and Mishra, Rakesh (2007) Addressing the issues of increasing cultural diversity within an educational institution. In: The 2nd University of Huddersfield Teaching & Learning Conference, 14th September 2007, Huddersfield, UK. (Unpublished)

Fieldhouse, John D., Steel, William P., Talbot, Chris J. and Crampton, Andrew (2007) Measurement of absolute displacement of a twin calliper disc brake during noise. In: 10th EAEC European Automotive Congress (EAEC 2005). Curran Associates. ISBN 9781604236040

Gilkes, Oliver S., Mishra, Rakesh, Fieldhouse, John D. and Rao, Vasu (2007) Effectiveness of active and passive methods of improving transient response in turbocharged engine systems. In: 11th European Automotive Congress : Automobile for the future, 30 May - 1Sst June 2007, Budapest, Hungary. (Unpublished)

Gilkes, Oliver S., Mishra, Rakesh, Rao, H.V. and Fieldhouse, John D. (2007) Transient response of turbocharged diesel engine for transient operation using air injection assist system. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

Guo, Li, Li, Bo and Chen, Xun (2007) Grinding temperature in high efficiency deep grinding of engineering ceramics. In: Proceedings of the 13th International Conference on Automation and Computing. Pacilantic International. ISBN 9780955529313

He, Xiangjian and Lu, Joan (2007) Editorial: International Journal of Agent- Oriented Software Engineering. International Journal of Agent-Oriented Software Engineering, 1 (2). pp. 145-146. ISSN 1746-1375

Ibrahim, D., Lu, Joan, Allen, Gary and Yip, Yau Jim (2007) Schema based approach of mapping XML documents to relational database. In: Proceedings of the 2007 International Conference on Internet Computing. CSREA Press, pp. 332-338. ISBN 1601320442

Jackson, Mark J., Khangar, A., Chen, Xun, Robinson, Grant M., Venkatesh, V.C. and Dahotre, N.B. (2007) Laser cleaning and dressing of vitrified grinding wheels. Journal of Materials Processing Technology, 185 (1-3). pp. 17-23. ISSN 0924-0136

Jackson, Mark J., Robinson, Grant M. and Chen, Xun (2007) Laser processing of high performance grinding wheels. International Journal of Manufacturing Technology and Management, 12 (1/2/3). pp. 3-24. ISSN 1368-2148

Li, Hao, Lu, Joan, Gong, Ning and Li, Dexian (2007) Investigation of XQuery mechanism in water supplying information system. In: Proceedings of the 13th International Conference on Automation and Computing (ICAC’07). Staffordshire University. ISBN 9780955529313

Li, Hao, Lu, Joan, Li, Dexian and Xue, Gang (2007) Mapping between BPMN and XPDL based on XML-binding. In: Proceedings of the 13th International Conference on Automation and Computing (ICAC’07). Staffordshire University. ISBN 9780955529313

Li, Zongqi, Lu, Joan, Li, Li and Yao, Shaowen (2007) An MASIF-based mobile agent mechanism to locate mobile agent in crossing regions. In: Proceedings of the 13th International Conference on Automation and Computing (ICAC’07). Staffordshire University. ISBN 9780955529313

Lidstone, Liam, Gu, Fengshou and Ball, Andrew (2007) An Experimental Study of NOx Emissions for the Development of an Emission Analysis Tool. In: SAE 2007 Fuels and emissions conference proceedings. SAE, Washington D C, U.S.A..

Liu, Qiang, Chen, Xun and Gindy, Nabil (2007) Assessment of Al2O3 and superabrasive wheels in nickel-based alloy grinding. International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 940-951. ISSN 0268-3768

Liu, Qiang, Chen, Xun and Gindy, Nabil (2007) Evaluation of superalloy heavy-duty grinding based on multivariate tests. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221 (9). pp. 1421-1430. ISSN 0954-4054

Long, Hua, Lu, Joan, Chao, S. and Yip, Yau Jim (2007) Handoff algorithm improvement and its analysis for mobile networks. In: Proceedings of the 2007 International Conference on Communications. CSREA Press, pp. 66-71. ISBN 1-60132-030-2

Long, Hua, Lu, Joan, Shao, Guantao and Yip, Yau Jim (2007) A Clustering Algorithm for Block Mobility in Ad-hoc Network. Communications of SIWN, 5. ISSN 1757-4439

Lu, Gehao, Lu, Joan, Yao, Shaowen and Yip, Yau Jim (2007) A comparative study in Java-based development platforms for multi-agent systems. In: Proceedings of the 2007 International Conference on Internet Computing, ICOMP 2007. CSREA Press, pp. 339-345. ISBN 1601320442

Lu, Gehao, Lu, Joan, Yao, Shaowen and Yip, Yau Jim (2007) A review on computational trust models for multi-agent systems. In: Proceedings of the 2007 International Conference on Internet Computing, ICOMP 2007. CSREA Press, pp. 325-331. ISBN 1601320442

Lu, Joan (2007) Proceedings of the 2007 International Conference on Internet Computing, ICOMP 2007. CSREA Press, USA. ISBN 1-60132-044-2

Lu, Joan and Fox, Rob (2007) Effectively storing and querying XML. In: Proceedings of the 2007 International Conference on Internet Computing, ICOMP 2007. CSREA Press, USA, pp. 311-317. ISBN 1-60132-044-2

Lu, Joan and Rahman, Umair (2007) Semantic search technology for information retrieval on the web. International Journal of Agent-Oriented Software Engineering, 1 (2). pp. 225-243. ISSN 1746-1383

Malviya, Vihar, Mishra, Rakesh, Palmer, Edward and Majumdar, Bireswar (2007) CFD Based Analysis of the Effect of Multi-Hole Pressure Probe Geometry on Flow Field Interference. In: Fluid mechanics and Fluid Power. Birla Institute of Technology, pp. 113-122.

Malviya, Vihar, Mishra, Rakesh, Palmer, Edward and Majumdar, Bireswar (2007) Numerical analysis and optimisation of multi-hole pressure probe geometry. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-8.

Mishra, Rakesh and Rasool, S. A. (2007) A practical approach to increase learning effectiveness in engineering education: SHOCC approach. In: Learning Conference 2007, 26-29 June 2009, Johannesburg, South Africa. (Unpublished)

Odunze, N., Mishra, Rakesh and Reed, J. (2007) The CFD analysis of the effects of the size and location of an Air-Inlet in domestic kitchen extraction. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

Pein, Raoul Pascal and Lu, Joan (2007) A flexible image retrieval framework. In: Computational Science – ICCS 2007. Lecture Notes in Computer Science, 4489/2 . Springer, Berlin / Heidelberg, pp. 754-761. ISBN 9783-540725879

Shi, John Z., Elshanti, Ali, Gu, Fengshou and Ball, Andrew (2007) A Desk-top tutorial Demonstration of Model-based Fault Detection and Diagnosis. International Journal of COMADEM, 10 (4). pp. 23-31. ISSN 1363-7681

Shi, John Z., Gu, Fengshou, Goulding, Peter and Ball, Andrew (2007) Integration of multiple platforms for real-time remote model-based condition monitoring. Computers in Industry, 58 (6). pp. 531-538. ISSN 01663615

Shi, John Z., Higson, Andrew, Kidd, Moray, Gu, Fengshou and Ball, Andrew (2007) Fault Signal Extraction Using Deviation Energy in Frequency Domain. In: Second World Congress on Engineering Asset Management and the Fourth International Conference on Condition Monitoring, 11-14 June 2007, Harrogate, UK.

Talbot, Chris J., Crampton, Andrew, Fieldhouse, John D. and Steel, William P. (2007) Mathematical modelling of brake noise vibrations using spectral methods. In: 22nd Imac Conference and Exposition 2004 (Imac Xxii). Curran Associates. ISBN 9781604238020

Wang, Lizhen, Lu, Joan and Yip, Yau Jim (2007) An effective approach to predicting plant species in an ecological environment. In: Proceedings of the 2007 International Conference on Information & Knowledge Engineering, IKE 2007. CSREA Press, USA, pp. 245-250. ISBN 1-60132-050-7

Wang, Lizhen, Lu, Joan, Yip, Yau Jim and Lu, Joan (2007) AOG-ags algorithms and applications. In: Advanced Data Mining and Applications. Lecture Notes in Computer Science, 4632/2 . Springer Berlin / Heidelberg, pp. 323-334. ISBN 9783-540738701

Wang, Y., Chen, Xun and Gindy, Nabil (2007) Surface error decomposition for fixture development. International Journal of Advanced Manufacturing Technology, 31 (9-10). pp. 948-956. ISSN 0268-3768

Xue, Gang, Lu, Joan and Yao, Shaowen (2007) Investigating workflow patterns in term of Pi-calculus. In: 11th International Conference on Computer Supported Cooperative Work in Design. IEEE, Melbourne, Victoria, pp. 823-827. ISBN 1424409632

Xue, Gang, Lu, Joan, Yao, Shaowen and Li, Dexian (2007) An investigation in BPM system within SOA. In: Proceedings of the 13th International Conference on Automation and Computing (ICAC’07). Staffordshire University. ISBN 9780955529313

Yao, Shaowen, Tang, Mingjing, Gong, Ning and Lu, Joan (2007) Transaction processing and validation based on membrane calculus for composite services. In: Proceedings of the 13th International Conference on Automation and Computing (ICAC’07). Staffordshire University. ISBN 9780955529313

Yeung, Ka Yiu and Chen, Xun (2007) 3D freeform component fixture design optisation using a genetic algorithm. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Zhang, X., Jiang, Xiang and Crampton, Andrew (2007) Numerical Analysis of the Boundary Effect of Radial Basis Functions in 3D Surface Reconstruction. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

2006

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2006) Computer Assisted Laboratory Instructions: Learning Outcomes Analysis. In: Proceedings of IV international conference on multimedia and information and communication technologies in communication. m-ICTE, Seville, Spain, pp. 330-341. ISBN 8469024698

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Fieldhouse, John D. and Ward, Steve (2006) Effectiveness of Parallel and Serial Integration of Teaching Resources in Laboratory Teaching in Engineering Education. International Journal of Learning, 13 (6). pp. 55-62. ISSN 1447-9494

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Fieldhouse, John D., Ward, Steve and McComish, John (2006) Effect of integration of computer simulations in traditional teaching methodology. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, UK, pp. 1-8.

Brennan, James K., Jiang, Xiang, Crampton, Andrew and Leach, Richard K. (2006) Propagation of measurement uncertainty for surface texture parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Bryant, David, Crampton, Andrew, Fieldhouse, John D. and Talbot, Chris J. (2006) Discussion of characteristics of brake judder and the necessary data acquisition system for complete analysis. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Chen, Xun and Limchimchol, Thitikorn (2006) Monitoring Grinding Wheel Redress-life Using Support Vector Machines. International Journal of Automation and Computing, 3 (1). pp. 56-62. ISSN 1476-8186

Crampton, Andrew and Forbes, Alistair B. (2006) Spline approximation using knot density functions. In: Algorithms for Approximation. Springer, London, pp. 249-258. ISBN 978-3-540-33283-1

Fan, Qingming, Hua, Chen, Yan, Cao, Liu, Baolong, Yang, Yuexin, Sun, Bo, Rujia, Zhao and Lu, Joan (2006) The application of XML in the denotation of plant diseases and insect pests information. In: Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP 2006. CSREA Press, pp. 311-315. ISBN 1-60132-005-1

Feng, Z. and Chen, Xun (2006) Grinding Wheel Loading Features Extracted by Image Processing. Key Engineering Materials, 304-30. pp. 14-18. ISSN 1662-9795

Fieldhouse, John D., Bryant, David, Talbot, Chris J., Crampton, Andrew and Mishra, Rakesh (2006) The development of a design methodology to reduce the probability of brake judder and drone due to thermo-elastic instabilities of the brake rotor. In: FISITA World Automotive Congress 2006, Yokohama, Japan.

Fieldhouse, John D., Palmer, Edward and Mishra, Rakesh (2006) Optimisation of pin shape and its configuration for a "PIN" type vented brake disc using CFD. In: FISITA 2006 World Automotive Congress, Yokohama, Japan.

Gilkes, Oliver S. and Mishra, Rakesh (2006) Comparison of passive and active methods for improving transient performance of turbocharged engine systems. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Gilkes, Oliver S. and Mishra, Rakesh (2006) Computer simulation of air injection to the inlet manifold on turbocharged engines. In: FISITA World Student Congress, 2006, October 2006, Yokohama, Japan.

Griffin, J, Limchimchol, Thitikorn and Chen, Xun (2006) Multivariable classification of grinding burn and chatter. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International. ISBN 9780953389094

Griffin, James Marcus and Chen, Xun (2006) Classification of the acoustic emission signals of rubbing, ploughing and cutting during single grit scratch tests. International Journal of Nanomanufacturing, 1 (2). pp. 189-209. ISSN 1746-9392

Griffin, James Marcus and Chen, Xun (2006) Classification of varying levels of ploughing, rubbing and cutting during Single Grit tests using Evolutionary Inspired Computer Techniques. In: 4th International Conference on Manufacturing Research (ICMR 2006), 5th-7th September 2006, Liverpool John Moores University, Liverpool. (Submitted)

Gu, Fengshou, Yesilyurt, I., Li, Yuhua, Harris, Georgina and Ball, Andrew (2006) An Investigation of the Effects of Measurement Noise in the Use of Instantaneous Angular Speed for Machine Diagnosis. Mechanical Systems and Signal Processing, 20 (6). pp. 1444-1460. ISSN 08883270

Hua, Chen, Chunyan, Tang, Yuexin, Yang, Yan, Cao, Zhoui, Fang, Rujia, Zhao and Lu, Joan (2006) On-line news management system based on ASP and XML. In: Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP 2006. CSREA Press, pp. 302-305. ISBN 1-60132-005-1

Hua, Chen, Qingli, Lv, Yan, Cao, Baolong, Liu, Li, Yuan, Rujia, Zhao and Lu, Joan (2006) Examining analysis and evaluation system based on XML. In: Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP 2006. CSREA Press, pp. 322-326. ISBN 1-60132-005-1

Jackson, Mark J., Robinson, Grant M. and Chen, Xun (2006) Laser Surface Preparation of Vitrified Grinding Wheels. Journal of Materials Engineering and Performance, 15 (2). pp. 247-250. ISSN 1059-9495

Jiang, J, Gennish, R., Gu, Fengshou, Ball, Andrew, Jiao, F, Tao, T, Li, X and Liu, K (2006) An Investigation of acoustic measurements in the exhaust system for diesel engine combustion monitoring. In: Structure health monitoring conference, 5-7 July 2006, Spain.

Li, Hao, Lu, Gehao, Lu, Joan and Yao, Shaowen (2006) Semantic Enhanced Self-Configuring Grid Framework. In: Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP 2006. CSREA Press. ISBN 1-60132-005-1

Li, Hao, Lu, Gehao, Lu, Joan and Yao, Shaowen (2006) Semantic enhanced self-configuring grid framework. In: Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP 2006. CSREA Press, pp. 316-321. ISBN 1-60132-005-1

Limchimchol, Thitikorn, Griffin, James Marcus and Chen, Xun (2006) Multi-class classification of grinding chatter detection using support vector machines. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 217-222. ISBN 9780953389094

Liu, Qiang, Chen, Xun, Cobb, Sue and Eastgate, Richard (2006) Physical behaviours simulation and exact collision detection within VFDAS. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 33-37. ISBN 9780953389094

Liu, Qiang, Chen, Xun and Gindy, Nabil (2006) Investigation of acoustic emission signals under a simulative environment of grinding burn. International Journal of Machine Tools and Manufacture, 46 (3-4). pp. 284-292. ISSN 08906955

Lu, Gehao, Li, Hao, Lu, Joan and Yao, Shaowen (2006) Agent mediated SOA with XML framework for grid computing. In: Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP 2006. CSREA Press, pp. 347-351. ISBN 1-60132-005-1

Lu, Joan, Cripps, Nathan and Hua, Chen (2006) XML security in certificate management. In: Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP 2006. CSREA Press, pp. 340-346. ISBN 1-60132-005-1

Lu, Joan, Naeem, Tahir and Stav, John B. (2006) A distributed informaton system for healthcare web services. International Workshop on Web-Based Internet Computing for Science and Engineering (ICSE 2006), 3842. pp. 783-790. ISSN 0302-9743

Palmer, Edward, Mishra, Rakesh and Fieldhouse, John D. (2006) Analysis of air flow and heat dissipation from a high performance passenger car front brake rotor. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Pein, Raoul Pascal and Lu, Joan (2006) Content based image retrieval by combining features and query-by-sketch. In: Proceedings of 2006 International Conference on Information & Knowledge Engineering. CSREA Press, Las Vegas, USA, pp. 49-55. ISBN 1-60132-003-5

Sasi, Ahmed Y. Ben, Gu, Fengshou, Li, Yuhua and Ball, Andrew (2006) A validated model for the prediction of rotor bar failure in squirrel-cage motors using instantaneous angular speed. Mechanical Systems and Signal Processing, 20 (7). pp. 1572-1589. ISSN 08883270

Talbot, Chris J. and Crampton, Andrew (2006) Pseudo spectral methods applied to problems in elasticity. Journal of Scientific Computing, 27 (1-3). pp. 443-454. ISSN 1573-7691

Yan, Cao, Hua, Chen, Lina, Yang, Ning, Liu, Rujia, Zhao and Lu, Joan (2006) Virtual enterprise oriented enterprise strategies and cooperative product design system development based on J2EE MVC Mode. In: Proceedings of the 2006 International Conference on Internet Computing & Conference on Computer Games Development, ICOMP 2006. CSREA Press, pp. 306-310. ISBN 1-60132-005-1

Yeung, Ka Yiu and Chen, Xun (2006) 2D freeform component fixture design optimisation using genetic algorithm. In: Advances in Manufacturing Technology XX: Proceedings of the 4th International Conference on Manufacturing Research (ICMR2006). BPR, pp. 131-136. ISBN 9780955321504

Yeung, Ka Yiu and Chen, Xun (2006) Web based approach for fixture design. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 171-175. ISBN 9780953389094

2005

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Approximation of surface roughness profiles and parameters. In: International Conference on Advanced Mathematical and Computational Tools in Metrology (AMCTM 2005), 27–29 June, 2005, Instituto Português da Qualidade, Caparica, Portugal. (Unpublished)

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Approximation of surface texture profiles. Journal of Physics, Series. pp. 264-267. ISSN 1742-6596

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Propagation of uncertainty in discretely sampled surface roughness profiles. Advanced mathematical and computational tools in metrology VII. pp. 271-275.

Chen, Xun, Liu, Q.S. and Gindy, Nabil (2005) Signal Analysis of Acoustic Emission for Laser Imitating Grinding Burn. Key Engineering Materials, 291-29. pp. 91-96. ISSN 1662-9795

Crampton, Andrew and Mason, John C. (2005) Detecting and approximating fault lines from randomly scattered data. Journal of Numerical Algorithms, 39 (1-3). pp. 115-130. ISSN 1017-1398

Griffin, James Marcus and Chen, Xun (2005) Investigation of grinding burn through various extracted sensory information. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 263-268. ISBN 9780953389087

Hua, Chen, Yan, Cao, Rujia, Zhao and Lu, Joan (2005) Product design scheme decision-making system based on CBR coupled with ANN. Proceedings of the Ninth International Conference on Computer Supported Cooperative Work in Design, 2005, 2. pp. 856-860. ISSN ISBN: 1-84600-002-5

Hua, Chen, Yang, Yuexin, Yan, Cao, Bo, Sun, Rujia, Zhao and Lu, Joan (2005) XML based Installation Agriculture Technology Markup Language - IATML. In: Proceedings of The 2005 International Conference on Internet Computing, ICOMP 2005. CSREA Press, pp. 10-15. ISBN 1-932415-69-6

Li, Yuhua, Gu, Fengshou, Harris, G., Ball, Andrew, Bennett, N and Travis, K (2005) The measurement of instantaneous angular speed. Mechanical Systems and Signal Processing, 19 (4). pp. 786-805. ISSN 0888-3270

Liu, Qiang, Chen, Xun, Cobb, Sue and Eastgate, Richard (2005) Virtual reality application in fixture assembly and interactive simulation. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 183-188. ISBN 9780953389087

Liu, Qiang, Chen, Xun and Gindy, Nabil (2005) Fuzzy pattern recognition of AE signals for grinding burn. International Journal of Machine Tools and Manufacture, 45 (7-8). pp. 811-818. ISSN 08906955

Lu, Joan (2005) A survey of XML applications on science and technology. International Journal of Software Engineering and Knowledge Engineering, 15 (1). pp. 1-33. ISSN 0218-1940

Lu, Joan (2005) A survey of XML applications on science and technology. International Journal of Software Engineering and Knowledge Engineering, 15 (1). pp. 1-33. ISSN 0218-1940

Lu, Joan, Cripps, Nathan, Hua, Chen and Yan, Cao (2005) An approach to XML key management specification in X-certification. In: Proceedings of The 2005 International Conference on Internet Computing, ICOMP 2005. CSREA Press, pp. 488-493. ISBN 1-932415-69-6

Lu, Joan, Rahman, Umair and Chen, Hua (2005) An agent related intelligent search technology on the Web information retrieval system. In: Proceedings of the Ninth International Conference on Computer Supported Cooperative Work in Design, 2005. IEEE, pp. 458-463. ISBN 1-84600-002-5

Lu, Joan, Rahman, Umair and Yao, Shaowen (2005) An agent related implementation on the web information retrieval system. In: Third International Conference on Information Technology and Applications (ICITA 05). IEEE, pp. 215-220. ISBN 0-7695-2316-1

Lu, Joan, Riaz, Mumtaz, Wang, Xujing, Hua, Chen and Yan, Cao (2005) Building XML applications in science and technology: implementing XML-based methodology to viewing analysed medical data. In: Proceedings of The 2005 International Conference on Internet Computing, ICOMP 2005. CSREA Press, pp. 494-499. ISBN 1-932415-69-6

Lucas, Gary and Mishra, Rakesh (2005) Measurement of bubble velocity components in a swirling gas–liquid pipe flow using a local four-sensor conductance probe. Measurement Science and Technology, 16 (3). pp. 749-758. ISSN 0957-0233

Lucas, Gary, Wang, M. and Mishra, Rakesh (2005) Comparison of bubble velocity components in a swirling gas-liquid pipe flow using dual-plane EIT and a novel 4-sensor local probe. In: 4th World Congress on Industrial Process Tomography, 5 - 8 September 2005, Aizu, Japan. (Unpublished)

Mason, John C. and Crampton, Andrew (2005) Laurent-Pade approximants to four kinds of Chebyshev polynomial expansion. Part 1. Maehly type approximants. Journal of Numerical Algorithms, 38 (1). pp. 3-18. ISSN 1572-9265

Mason, John C. and Crampton, Andrew (2005) Laurent-Pade approximants to four kinds of Chebyshev polynomial expansion. Part 2. Clenshaw-Lord type approximants. Journal of Numerical Algorithms, 38 (1). pp. 19-29. ISSN 1572-9265

Shi, John Z., Gu, Fengshou, Lennox, Barry and Ball, Andrew (2005) The development of an adaptive threshold for model-based fault detection of a nonlinear electro-hydraulic system. Control Engineering Practice, 13 (11). pp. 1357-1367. ISSN 0967-0661

Stav, John B., Thorseth, Trond M. and Lu, Joan (2005) Learning Object Farms in Mathematics and Natural Sciences. In: Proceedings of The 2005 International Conference on Internet Computing, ICOMP 2005, Las Vegas, Nevada, USA, June 27-30, 2005. CSREA Press, pp. 500-505. ISBN 1-932415-69-6

Sun, D, Chen, Xun, Du, F, Yang, X, Zhang, J and Zhang, X (2005) Temperature simulation of 2050 rough rolling process. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 43-48. ISBN 9780953389087

Sun, Dengyue, Chen, Xun, Du, Fengshan, Zhu, Guangming and Zhou, Jiangang (2005) Dynamic thickness simulation of five-stand continuous cold rolling. Journal of Materials Processing Technology, 167 (2-3). pp. 218-223. ISSN 0924-0136

Talbot, Chris J. and Crampton, Andrew (2005) Application of the pseudo-spectral method to 2D eigenvalue problems in elasticity. Journal of Numerical Algorithms 38 Special Issue: Chebyshev Polynomials, 38. pp. 95-110. ISSN 1017-139

Terry, Jane, Crampton, Andrew and Talbot, Chris J. (2005) Passive Sonar Harmonic Detection Using Feature Extraction and Clustering Analysis. In: OCEANS 2005 MTS/IEEE “One Ocean” Conference, 18-23 September 2005, Washington D.C.. (Unpublished)

Terry, Jane L., Crampton, Andrew and Talbot, Chris J. (2005) Associating families of curves using feature extraction and cluster analysis. In: Algorithms for Approximation. Springer, Berlin, pp. 71-80. ISBN 978-3-540-33283-1

Tian, J and Chen, Xun (2005) Multi-model reasoning medical diagnosis system integrated with probabilistic reasoning. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 79-84. ISBN 9780953389087

Tian, Jia, Chen, Xun and Dong, Shen-Ping (2005) Multi-Modal Reasoning Medical Diagnosis System Integrated With Probabilistic Reasoning. International Journal of Automation and Computing, 2 (2). pp. 134-143. ISSN 1476-8186

Wang, Y, Chen, Xun and Gindy, Nabil (2005) Fixturing error measurement and analysis using CMMs. Journal Paper of Physics: Conference Series, 13. pp. 163-166. ISSN 1742-6588

Wang, Yan, Chen, Xun and Gindy, Nabil (2005) Deformation Analysis of Fixturing for Workpiece with Complex Geometry. Key Engineering Materials, 291-29. pp. 631-636. ISSN 1662-9795

Yan, Cao, Hua, Chen, Rujia, Zhao and Lu, Joan (2005) Dynamic process management of rapid virtual product design project in a virtual enterprise to deal with various uncertainties. In: Proceedings of The 2005 International Conference on Internet Computing, ICOMP 2005, Las Vegas, Nevada, USA, June 27-30, 2005. CSREA Press, pp. 3-9. ISBN 1-932415-69-6

Yao, Shaowen, Wu, Yi-ming and Lu, Joan (2005) Investigation of mechanism of flexible workflow based on agent. In: Proceedings of The 2005 International Conference on Internet Computing, ICOMP 2005, Las Vegas, Nevada, USA, June 27-30, 2005. CSREA Press, pp. 22-28. ISBN 1-932415-69-6

Yeung, Ka Yiu and Chen, Xun (2005) Automated fixture error minimisation using genetic algorithm. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 67-72. ISBN 9780953389087

Yi-ming, Wu, Lu, Joan, Yao, Shao-wen and Zheng, Zhi-jie (2005) Mechanism of semantic oriented flexible workflow. Third International Conference on Information Technology and Applications (ICITA'05), 1. pp. 209-214.

2004

Chen, Xun, Feng, Zhi Jing and Pashby, I.R. (2004) Comparison of Laser Cleaning of A1(2)O(3) and CBN Grinding Wheels. Key Engineering Materials, 257-25. pp. 365-370. ISSN 1662-9795

Chen, Xun, Feng, Zhi Jing and Pashby, I.R. (2004) A study on laser cleaning of A1(2)O(3)grinding wheels. Key Engineering Materials, 257-25. pp. 359-364. ISSN 1662-9795

Jenkinson, D.P., Crampton, Andrew, Mason, John C., Cox, M.G., Forbes, Alistair B. and Boudjemae, R. (2004) Parameterised approximation estimators for mixed noise distributions. In: Advanced Mathematical & Computational Tools In Metrology Vi. Series on Advances in Mathematics for Applied Sciences, 66 . World Scientific, pp. 67-81. ISBN 978-981-238-904-6

Jenkinson, D.P., Mason, John C. and Crampton, Andrew (2004) Iteratively weighted approximation algorithms for nonlinear problems using radial basis function examples. Applied Numerical Analysis & Computational Mathematics, 1 (1). pp. 165-179. ISSN 1611-8170

Liu, Y. and Chen, Xun (2004) A study on the abrasive water jet cutting for granite. Key Engineering Materials, 257-25. pp. 527-534. ISSN 1662-9795

Lu, Joan and Cripps, Nathan (2004) Building XML applications in science and technology: an XML approach to authentication in scientific documents. In: Proceedings of the International Conference on Internet Computing, IC '04. CSREA Press, pp. 201-207. ISBN 1-932415-44-0

Lu, Joan and Rahman, Umair (2004) Intelligent search technology for extracting scientific data/documents on web. In: Proceedings of the International Conference on Internet Computing, IC '04. CSREA Press, pp. 220-226. ISBN 1-932415-44-0

Lu, Joan and Riaz, M. (2004) Building a web-based coupling quotation system in mechanical engineering. In: Advances in E-Engineering and Digital Enterprise Technology: Proceedings of the 4th International Conference on E-Engineering and Digital Enterprise. Wiley, pp. 103-112. ISBN 978-1-86058-467-1

Lucas, Gary, Mishra, Rakesh and Panayotopoulos, Nikolaos (2004) Power law approximations to gas volume fraction and velocity profiles in low void fraction vertical gas-liquid flows. Flow Measurement and Instrumentation, 15 (5/6). pp. 271-283. ISSN 0955-5986

Lucas, Gary, Wang, M., Mishra, Rakesh, Dai, Y. and Panatyapolous, N. (2004) Comparison Of gas velocity And volume fraction profiles from a dual-plane ERT system with profiles from a local conductance probe. In: 3rd international symposium on process tomography, 9 - 10 September 2004, Poland. (Unpublished)

Sasi, Ahmed Yousef Ben, Gu, Fengshou, Payne, Bradley and Ball, Andrew (2004) Instantaneous angular speed monitoring of electric motors. Journal of Quality in Maintenance Engineering, 10 (2). pp. 123-135. ISSN 1355-2511

Steel, William P., Fieldhouse, John D., Talbot, Chris J. and Crampton, Andrew (2004) In-plane disc brake vibration measurement using holographic interferometry. In: Total Vehicle Technology: Finding the Radical, Implementing the Practical (3rd International Conference). Wiley, pp. 261-274. ISBN 9781860584602

Steel, William P., Fieldhouse, John D., Talbot, Chris J. and Crampton, Andrew (2004) In-plane vibration investigations of a noisy disc brake. In: Braking 2004: Vehicle Braking and Chassis Control. Wiley, pp. 103-112. ISBN 978-1-86058-464-0

Steel, William P., Fieldhouse, John D., Talbot, Chris J. and Crampton, Andrew (2004) Modelling 3D displacement in a disc brake rotor generating noise. In: FISITA 2004 World Automotive Congress, 23rd-27th May, 2004, Barcelona, Spain. (Unpublished)

Talbot, Chris J., Fieldhouse, John D., Steel, William P. and Crampton, Andrew (2004) Pseudo-spectral methods applied to the mathematical modelling of disc brake squeal. In: Braking 2004: Vehicle Braking and Chassis Control. Wiley, pp. 157-166. ISBN 978-1-86058-464-0

Wade, Steve (2004) An Approach to Integrating Soft Systems Methodology and Object Oriented Software Development. Proceedings of UKAIS 2004.

2003

Ball, Andrew, Gu, Fengshou and Yesilyurt, I. (2003) Gear tooth stiffness reduction measurement using modal analysis and its use in wear fault severity assessment of spur gears. NDT & E International, 36 (5). pp. 357-372. ISSN 0963-8695

Chen, Xun and Feng, Zhengming (2003) Effectiveness of Laser Cleaning for Grinding Wheel Loading. Key Engineering Materials, 238-39. pp. 289-294. ISSN 1013-9826

Crampton, Andrew, Fieldhouse, John D., Talbot, Chris J. and Steel, William P. (2003) Modeling disc brake noise using spectral methods. In: 5th EUROMECH Solid Mechanics Conference, 17-22 August 2003, AUT, Thessaloniki, GREECE. (Unpublished)

Dix, A., Ellis-Ramduny, D. and Wilkinson, J. (2003) Trigger analysis understanding broken tasks. In: The Handbook of Task Analysis for Human-Computer Interaction. Lawrence Erlbaum Associates, Mahwah, New Jersey, pp. 381-400. ISBN 0805844325

Fieldhouse, John D., Talbot, Chris J., Steel, William P. and Crampton, Andrew (2003) The measurement of in-plane vibration characteristics of a noisy twin calliper disc brake. In: Inter-noise 2003. Internoise, pp. 135-142. ISBN 9788995218914

Kendall, S.C., Crampton, Andrew and Mason, John C. (2003) Shape preserving approximation with large sets of scattered data. In: Curve and Surface Fitting: Saint-Malo 2002. Nashboro Press, Brentwood, pp. 89-96. ISBN 0-9728482-1-5

Kumar, U., Mishra, Rakesh, Singh, S.N. and Seshadri, V. (2003) Effect of particle gradation on flow characteristics of ash disposal pipelines. Powder Technology, 132 (1). pp. 39-51. ISSN 0032-5910

Lei, Dongdong, Crampton, Andrew, Mason, John C. and Ross, C. (2003) An efficient algorithm for solving linearized SVM regression problems. In: Curve and Surface Fitting: Saint-Malo 2002. Nashboro Press, Brentwood, pp. 249-258. ISBN 0-9728482-1-5

Lu, Joan (2003) Building XML applications in science and technology: XML in scientific graphic databases. In: International Conference on Internet Computing. CSREA Press, pp. 237-242. ISBN 1-932415-00-9

Lu, Joan, Helliwell, Nathan and Jackson, Adrian R. (2003) Investigation into online assessment with XML technologies. In: International Conference on Internet Computing. CSREA Press, pp. 111-117. ISBN 1-932415-00-9

Lu, Joan and Scaramuzza, M. (2003) Building XML application in rich detailed genealogical information. Information and Software Technology, 45 (2). pp. 95-108. ISSN 0950-5849

Payne, B.S., Gu, Fengshou, Webber, C J S and Ball, Andrew (2003) Componential coding in the condition monitoring of electrical machines Part 2: application to a conventional machine and a novel machine. Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science, 217 (8). pp. 901-915. ISSN 0954-4062

Talbot, Chris J., Fieldhouse, John D., Steel, William P. and Crampton, Andrew (2003) Modelling in-plane and out-of-plane vibrations in disc brake squeal. In: Inter-noise 2003. Internoise, pp. 3003-3011. ISBN 9788995218914

Webber, C J S, Payne, B.S., Gu, Fengshou and Ball, Andrew (2003) Componential coding in the condition monitoring of electrical machines Part 1: principles and illustrations using simulated typical faults. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 217 (8). pp. 883-899. ISSN 09544062

2002

Chen, Xun (2002) Precision grinding using CBN wheels. International Journal of Machine Tools and Manufacture, 42 (5). pp. 585-593. ISSN 0890-6955

Chen, Xun (2002) The sharpness of grinding wheels: an important measure of grinding behaviour. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216 (5). pp. 829-832. ISSN 0954-4054

Li, W, Parkin, Robert M, Coy, Joanne and Gu, Fengshou (2002) Acoustic based condition monitoring of a diesel engine using self-organising map networks. Applied acoustics, 63 (7). pp. 699-711. ISSN 0003-682X

Liu, S, Gu, Fengshou and Ball, Andrew (2002) The on-line detection of engine misfire at low speed using multiple feature fusion with fuzzy pattern recognition. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 216 (5). pp. 391-402. ISSN 0954-4070

Lu, Joan (2002) Building XML applications in science and technology: XML schema for scientific databases. In: Proceedings of the IADIS International Conference WWW/Internet 2002, ICWI 2002, Lisbon, Portugal, November 13-15, 2002. IADIS, pp. 395-402. ISBN 9729027536

Lu, Joan (2002) XML for scientific databases. In: XML World 2002, 23rd-25th September 2002, New Orleans. (Unpublished)

Mason, John C. and Crampton, Andrew (2002) Application of orthogonalisation procedures for Gaussian radial basis function and Chebyshev polynomials. In: Algorithms for approximation IV. University of Huddersfield, Huddersfield, pp. 236-243. ISBN 9781862180406

Mishra, Rakesh, Lucas, Gary and Kieckhoefer, H. (2002) A model for obtaining the velocity vectors of spherical droplets in multiphase flows from measurements using an orthogonal four-sensor probe. Measurement Science and Technology, 13 (9). pp. 1488-1498. ISSN 0957-0233

Mishra, Rakesh, Singh, Sidh and Seshadri, V. (2002) Velocity distribution in horizontal pipes conveying non-uniform particles. International Journal of Fluid Mechanics Research, 29 (6). pp. 760-778. ISSN 1064-2277

Tong, R.P., Crampton, Andrew and Trefethen, A.E. (2002) What are 'good' points for local interpolation by radial basis functions? In: Algorithms for Approximation IV. University of Huddersfield, Huddersfield, pp. 260-267. ISBN 9781862180406

2001

Crampton, Andrew and Mason, John C. (2001) Surface approximation of curved data using separable radial basis functions. In: Advanced mathematical and computational tools in metrology V. Series on advances in mathematics for Applied Sciences, 57 . World Scientific Publishing, London, pp. 118-125. ISBN 9810244940

Crampton, Andrew, Mason, John C. and Turner, D.A. (2001) Approximating semi-structure data with different errors using support vector machine regression. In: Mathematical methods for curves and surfaces. Innovations in applied mathematics . Vanderbilt University Press, Nashville, pp. 63-72. ISBN 9780826513786

Li, W, Gu, Fengshou, Ball, Andrew, Leung, A Y T and Phipps, C E (2001) A study of the noise from diesel engines using the independent component analysis. Mechanical Systems and Signal Processing, 15 (6). pp. 1165-1184. ISSN 0888-3270

Mishra, Rakesh, Fabien, C., Singh, S.N. and Seshadri, V. (2001) Holdup in multisized particulate solid-liquid flow through horizontal pipe. Indian Journal of Engineering & Materials Sciences, 8. pp. 84-89. ISSN 0971-4588

Unver, Ertu and Mavromihales, Mike (2001) Design and Development of an interactive 3D CNC Computer Aided Learning Program. In: 17th International Conference on CAD/CAM, Robotics and Factories of Future, 10-12 July 2001, Durban, South Africa.

2000

Chen, Xun (2000) Analysis of the transitional temperature for tensile residual stress in grinding. Journal of Materials Processing Technology, 107 (1-3). pp. 216-221. ISSN 0924-0136

Gu, Fengshou, Ball, Andrew and Li, W (2000) The Condition Monitoring of Diesel Engines Using Acoustic Measurements-Part 1: Acoustic Characteristics of the Engine and Representation of the Acoustic Signals. SAE Technical Papers. ISSN 0148-7191

Gu, Fengshou, Ball, Andrew and Li, W (2000) The Condition Monitoring of Diesel Engines Using Acoustic Measurements-Part 2: Fault Detection and Diagnosis. SAE Technical Papers. ISSN 0148-7191

Wade, Steve and Braekevelt, Patrick (2000) Use of IR_Framework in the Teaching of Information Retrieval. The New Review of Document and Text Management, 1. pp. 237-253. ISSN 1361-4584

Wade, Steve, Smith, Martin and Wolstenholme, Mark (2000) Applying Genetic Programming to the Problem of Term Weight Algorithms. The New Review of Document and Text Management, Vol. 1. pp. 101-111. ISSN 1361-4584

1999

Chen, Xun, Rowe, W. Brian, Allanson, D.R. and Mills, B. (1999) A Grinding Power Model for Selection of Dressing and Grinding Conditions. Journal of Manufacturing Science and Engineering, 121 (4). pp. 632-637. ISSN 1087-1357

Gu, Fengshou, Jacob, P J and Ball, Andrew (1999) Non-parametric models in the monitoring of engine performance and condition: Part 2: non-intrusive estimation of diesel engine cylinder pressure and its use in fault detection. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 213 (2). pp. 135-143. ISSN 0954-4070

Jacob, P J, Gu, Fengshou and Ball, Andrew (1999) Non-parametric models in the monitoring of engine performance and condition: Part 1: modelling of non-linear engine processes. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 213 (1). pp. 73-81. ISSN 0954-4070

Mills, B, Chen, Xun, Rowe, W. Brian and Li, Y (1999) Study and selection of grinding conditions Part 2: a hybrid intelligent system for selection of grinding conditions. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 213 (2). pp. 131-142. ISSN 0954-4054

Rowe, W. Brian and Chen, Xun (1999) Modelling surface roughness improvement in grinding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 213 (1). pp. 93-96. ISSN 0954-4054

1998

Agarwal, V.C. and Mishra, Rakesh (1998) Optimal design of a multi-stage capsule handling multi-phase pipeline. International Journal of Pressure Vessels and Piping, 75 (1). pp. 27-35. ISSN 0308-0161

Chen, Xun (1998) Analysis and simulation of the grinding process. Part IV: Effects of wheel wear. International Journal of Machine Tools and Manufacture, 38 (1-2). pp. 41-49. ISSN 0890-6955

Chen, Xun (1998) Life cycle model of the grinding process. Computers in Industry, 36 (1-2). pp. 5-11. ISSN 0166-3615

Mishra, Rakesh, Singh, S.N. and Seshadri, V. (1998) Study of wear characteristics and solid distribution in constant area and erosion-resistant long-radius pipe bends for the flow of multisized particulate slurries. Wear, 217 (2). pp. 297-306. ISSN 0043-1648

Mishra, Rakesh, Singh, S.N. and Seshadri, V. (1998) Velocity measurement in solid–liquid flows using an impact probe. Flow Measurement and Instrumentation, 8 (3-4). pp. 157-165. ISSN 0955-5986

1997

Boyle, A, Chen, Xun, Rowe, W. Brian and Allanson, D.R. (1997) Automatic dwell control in computer numerical control plunge grinding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 211 (7). pp. 565-575. ISSN 0954-4054

Rowe, W. Brian and Chen, Xun (1997) Characterization of the size effect in grinding and the sliced bread analogy. International Journal of Production Research, 35 (3). pp. 887-899. ISSN 0020-7543

Rowe, W. Brian, Li, Yan, Chen, Xun and Mills, B. (1997) An Intelligent Multiagent Approach for Selection of Grinding Conditions. CIRP Annals - Manufacturing Technology, 46 (1). pp. 233-238. ISSN 0007-8506

1996

Chen, Xun (1996) Analysis and simulation of the grinding process. Part I: Generation of the grinding wheel surface. International Journal of Machine Tools and Manufacture, 36 (8). pp. 871-882. ISSN 0890-6955

Chen, Xun (1996) Analysis and simulation of the grinding process. Part II: Mechanics of grinding. International Journal of Machine Tools and Manufacture, 36 (8). pp. 883-896. ISSN 0890-6955

Chen, Xun (1996) Analysis and simulation of the grinding process. Part III: Comparison with experiment. International Journal of Machine Tools and Manufacture, 36 (8). pp. 897-906. ISSN 0890-6955

Gu, Fengshou and Ball, Andrew (1996) Diesel injector dynamic modelling and estimation of injection parameters from impact response Part 1: modelling and analysis of injector impacts. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 210 (44). pp. 293-302. ISSN 0954-4070

Gu, Fengshou, Ball, Andrew and Rao, K K (1996) Diesel injector dynamic modelling and estimation of injection parameters from impact response part 2: prediction of injection parameters from monitored vibration. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 210 (44). pp. 303-312. ISSN 0954-4070

1995

Wade, Steve (1995) Application of a Genetic Algorithm to the Production of Text Signatures. The New Review of Document and Text Management, 1. pp. 147-167. ISSN 1361-4584

1994

Chen, Xun, Allanson, D.R., Thomas, A, Moruzzi, J and Rowe, W. Brian (1994) Simulation of feed cycles for grinding between centres. International Journal of Machine Tools and Manufacture, 34 (5). pp. 603-616. ISSN 0890-6955

Wade, Steve and Braekevelt, Patrick (1994) IR_Framework: a Class Library for Information Retrieval. In: Software Engineering in Higher Education. Transaction: Information and Communication Technologies volume 7, 7 . WIT Press, Southampton, UK. ISBN 1-85312-289-0

1989

Chen, Xun and Zhengbai, Lin (1989) Probe into the Characteristics of Grinding Wheel Wear. Journal of fuzhou University, 17 (2). pp. 70-75. ISSN 1000-2243

1985

Changqi, Xu, Zhengbai, Lin and Chen, Xun (1985) Three dimensional dynamometer for cylindrical grinding. Journal of fuzhou University (3). pp. 82-97. ISSN 1000-2243

This list was generated on Thu Oct 10 19:19:54 2024 UTC.