Items where School is "Surface Metrology Group"

2017

Bills, Paul J., Racasan, Radu, Bhattacharya, Saugatta, Blunt, Liam and Isaac, Graham (2017) Comparative study of material loss at the taper interface in retrieved metal-on-polyethylene and metal-on-metal femoral components from a single manufacturer. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 231 (8). pp. 683-690. ISSN 0954-4119

Cerquiglini, Arianna, Henckel, Johann, Hothi, Harry, Rotigliano, Niccolo, Holland, Matthew, Bills, Paul J., Racasan, Radu, Skinner, John, Hirschmann, A and Hart, A. J. (2017) Understanding Why Knee Implants Fail. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 14-18 2017, San Diego, CA, USA. (Unpublished)

Hothi, Harry, Panagiotopoulos, Andreas, Whittaker, Robert, Bills, Paul J., McMillan, Rebecca, Skinner, John and Hart, A. J. (2017) Damage patterns at the head-stem taper junction helps understand the mechanisms of material loss. Journal of Arthroplasty, 32 (1). pp. 291-295. ISSN 0883-5403

Kapadia, Darshil, Racasan, Radu, Pagani, Luca, Al-Hajjar, Mazen and Bills, Paul J. (2017) Method for volumetric assessment of edge-wear in ceramic-on-ceramic acetabular liners. Wear, 376-77 (Part A). pp. 236-242. ISSN 0043-1648

Lazinni, Gianmarco, Romoli, Luca, Blunt, Liam and Gemini, Laura (2017) Design and characterization of textured surfaces for applications in the food industry. Surface Topography: Metrology and Properties, 5. ISSN 2051-672X

Li, Duo and Jiang, Xiang (2017) A selective kinematics error model for on-machine measurement compensation. In: University of Huddersfield PGR Conference, 17 Nov 2017, University of Huddersfield. (Unpublished)

Lou, Shan, Abdou, Hussein, Zeng, Wenhan, Jiang, Xiang and Paul, Scott (2017) A Preliminary Investigation on Surface Roughness Assessment of Complex Additive Manufactured Parts Scanned by X-ray Computed Tomography. In: 7th Conference on Industrial Computed Tomography (iCT 2017), February 7 - 9, 2017, Leuven, Belgium. (Unpublished)

Lou, Shan, Brown, Stephen, Sun, Wenjuan, Zeng, Wenhan, Abdul-Rahman, Hussein S., Jiang, Xiang and Scott, Paul J. (2017) Use of Morphological Method to Investigate the Influence of Surface Texture on Dimensional Measurement of Additively Manufactured Parts. In: Special Interest Group Meeting: Additive Manufacturing, 10–11 October 2017, Katholieke Universiteit Leuven (KU Leuven), BE.

Lou, Shan, Zeng, Wenhan, Abdul-Rahman, Hussein S., Jiang, Xiangqian and Scott, Paul J. (2017) A Novel Surface Characterisation Strategy for the X-ray Computed Tomography Measurement of Complex Additively Manufactured Parts. In: Dimensional X-ray Computed Tomography Conference, 13 July 2017, University of Warwick, UK. (Unpublished)

Lou, Shan, Zeng, Wenhan, Pagani, Luca, Abdul-Rahman, Hussein S., Jiang, Xiang and Paul, Scott (2017) Development of Surface Characterisation Toolbox for Additive Manufactured Components: from Planar Layer Surfaces to Complex Functional Surfaces. In: EUSPEN Special Interest Group Meeting: Additive Manufacturing, 10–11 October 2017, Katholieke Universiteit Leuven (KU Leuven), BE.

Shah, Paras, Campbell, Grant M. and Bills, Paul J. (2017) Comparison of Industrial Aerated Structures Using X-Ray Computed Tomography. In: 7th Conference on Industrial Computed Tomography (iCT 2017), February 7 - 9, 2017, Leuven, Belgium. (Unpublished)

Zeng, Wenhan, Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2017) A new framework for Charactersation of Complex Structured Surface. In: Met & Props 2017, 27th-29th June 2017, Gothenburg, Sweeden. (In Press)

2016

Alberts, L. R., Martinez-Nogues, V., Cook, R. B., Maul, C., Bills, Paul J., Racasan, Radu, Stolz, M. and Wood, R. J. K. (2016) Comparison of Simulator Wear Measured by Gravimetric vs Optical Surface Methods for Two Million Cycles. In: Orthopaedic Research Society Annual Meeting, 5th - 8th March 2016, Orlando, Florida, USA. (Unpublished)

Bills, Paul J. (2016) Introduction to Computed Tomography as an aid to Forensic Analysis. In: Age Estimation Workshop, 13th - 14th May 2016, University of Huddersfield, UK. (Submitted)

Bills, Paul J., Shah, Paras, Townsend, Andrew, Blunt, Liam and Racasan, Radu (2016) Characterization of complex additive manufactured structures for the medical device industry using computed tomography. In: Dimensional X-Ray Computed Tomography Conference, 10th May 2016, National Physical Laboratory, London, UK. (Unpublished)

Di Laura, Anna, Whittaker, Robert, Hothi, Harry, Meswania, Jay, Henckel, Johann, de Villiers, Danielle, Kwon, Young-Min, Racasan, Radu, Bills, Paul J., Blunn, Gordon, Skinner, John and Hart, A. J. (2016) Understanding Why Dual-Taper Hips Fail. In: American Academy of Orthopaedic Surgeons Annual Meeting, 1-5 March 2016, Orlando, USA.

Kapadia, Darshil, Racasan, Radu, Al-Hajjar, Mazen and Bills, Paul J. (2016) Characterizing edge-wear in ceramic-on-ceramic acetabular cups. In: International Society for Technology in Arthroplasty (ISTA) 29th Annual Congress, October 5-8 2016, Boston, MA, USA. (Submitted)

Li, Tukun, Racasan, Radu and Bills, Paul J. (2016) The evolution of Geometrical Product Specification and Verification in the field of surface metrology and the challenges of its vocational training. In: 12th International Scientific Conference on Coordinate Measuring Technique, 18th - 20th April 2016, Bielsko-BIala, Poland. (Unpublished)

Lou, Shan, Jiang, Xiang, Zeng, Wenhan, Abdul-Rahman, Hussein S. and Scott, Paul J. (2016) The use of morphological methods for the extraction of topographical features from complex additive manufactured surfaces. In: MATHMET 2016 - International Workshop on Mathematics and Statistics for Metrology, 7-9 Nov 2016, PTB-Berlin, Abbestr. 2-12, 10587 Berlin, Germany. (Unpublished)

Lou, Shan, Jiang, Xiang, Zeng, Wenhan, Hussein, Abdul-Rahman and Paul, Scott (2016) Investigation of the compatibility of X-CT measurement data to surface topography analysis. In: Dimensional X-ray Computed Tomography Conference 2016, 9 May 2016, NPL, Teddington, London. (Unpublished)

Lou, Shan, Sun, Wenjuan, Zeng, Wenhan, Abdul-Rahman, Hussein S., Jiang, Xiangqian and Paul, Scott (2016) Extraction of Process Signature Features from Additive Manufactured Metal Surfaces. In: 16th International Conference on Metrology and Properties of Engineering Surfaces, 27th-29th June 2017, Gothenburg, Sweden. (Unpublished)

Moschetti, Giuseppe, Forbes, Alistair, Leach, Richard K, Jiang, Xiang and O’Connor, Daniel (2016) Phase and fringe order determination in wavelength scanning interferometry. Optics Express, 24 (8). pp. 8997-9012. ISSN 1094-4087

Shah, Paras, Racasan, Radu and Bills, Paul J. (2016) Comparison of Different Additive Manufacturing Methods Using Optimized Computed Tomography. In: Dimensional X-Ray Computed Tomography Conference, 10th May 2016, National Physical Laboratory, London, UK. (Unpublished)

Shah, Paras, Racasan, Radu and Bills, Paul J. (2016) Comparison of Different Additive Manufacturing Methods Using Optimized Computed Tomography. In: 6th Conference on Industrial Computed Tomography, 9th -12th February 2016, Wels, Austria.

Shah, Paras, Racasan, Radu and Bills, Paul J. (2016) Challenges in measurement and specification of complex additive manufactured structures for the medical device industry. In: ASTM Workshop on Additive Manufacturing for Medical Applications, 3rd May 2016, San Antonio, TX, USA. (Unpublished)

Shah, Paras, Racasan, Radu and Bills, Paul J. (2016) Comparison of Different Additive Manufacturing Methods Using Computed Tomography. Case Studies in Nondestructive Testing and Evaluation. ISSN 2214-6571

Townsend, Andrew, Blunt, Liam and Bills, Paul J. (2016) Investigating the capability of microfocus x-ray computed tomography for areal surface analysis of additively manufactured parts. In: American Society for Precision Engineering Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing, 27th - 30th June 2016, Raleigh, North Carolina, USA.

Townsend, Andrew, Pagani, Luca, Yin, Changji, Bills, Paul J. and Blunt, Liam (2016) Areal surface texture measurement of additively manufactured parts. In: ASTM Workshop on Additive Manufacturing for Medical Applications, 3rd May 2016, San Antonio, TX, USA. (Unpublished)

Townsend, Andrew, Senin, N., Blunt, Liam, Leach, R.K. and Taylor, J.S. (2016) Surface texture metrology for metal additive manufacturing: a review. Precision Engineering, 46. pp. 34-47. ISSN 0141-6359

Williamson, James, Martin, Haydn and Jiang, Xiangqian (2016) High resolution position measurement from dispersed reference interferometry using template matching. Optics Express, 24 (9). p. 10103. ISSN 1094-4087

2015

Bills, Paul J., Racasan, Radu, Tessier, P and Blunt, Liam (2015) Assessing the material loss of the modular taper interface in retrieved metal on metal hip replacements. Surface Topography: Metrology and Properties, 3 (2). 025002. ISSN 2051-672X

Blunt, Liam, Bills, Paul J. and Fleming, Leigh (2015) Metrology for Bio Systems. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, March 2-5 2015, Charlotte, NC, USA. (Submitted)

Foster, Katie, Bills, Paul J., Blunt, Liam, Jiang, Xiang and Leary, Richard (2015) The use of additive manufacturing for the presentation of ballistic toolmark evidence in court. In: 7th European Academy of Forensic Science Conference, 6-11 September 2015, Prague, Czech Republic.

Groschl, Andreas, Gotz, Jurgen, Loderer, Andreas, Bills, Paul J. and Hausotte, Tino (2015) Measures of improvement MUVoT, a Blended Learning course on the topic of Measurement Uncertainty for advanced Vocational Training. Procedia CIRP, 27. pp. 111-116. ISSN 2212-8271

Hothi, Harry, Whittaker, Robert, Meswania, Jay, Bills, Paul J., Blunt, Liam, Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, A. J. (2015) Material Loss at the Head Taper Junction of the Metal-on-Metal Pinnacle Total Hip Replacement. In: Orthopaedic Research Society Annual Meeting, March 28-31 2015, Las Vegas, NV, USA. (Submitted)

Leach, R.K., Giusca, C.L., Haitjema, H., Evans, C. and Jiang, Xiang (2015) Calibration and verification of areal surface texture measuring instruments. CIRP Annals - Manufacturing Technology, 64 (2). pp. 797-813. ISSN 0007-8506

Moschetti, Giuseppe, Muhamedsalih, Hussam, Jiang, Xiang, Leach, Richard K. and O'Connor, Daniel (2015) Extending the vertical range of wavelength scanning interferometry. In: Proceedings of the 5th ASPE Topical Meeting on Precision Interferometric Metrology. American Society for Precision Engineering, pp. 50-55. ISBN 978-1-887706-68-1

Panagiotopoulos, Andreas, Hothi, Harry, Whittaker, Robert, Matthies, Ashley K, Bills, Paul J., Racasan, Radu, Blunt, Liam, Skinner, John and Hart, A. J. (2015) Charactering taper junction wear helps understand the mechanism of failure of metal on metal hip replacements. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 24-28 2015, Las Vegas, NV, USA. (Submitted)

Panagiotopoulos, Andreas, Hothi, Harry, Whittaker, Robert, Meswania, Jay, Bills, Paul J., Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, A. J. (2015) Identifying The Pattern of Material Loss at the Head-Neck Junction Wear Helps Determine the Mechanism of Failure of Metal on Metal Total Hip Replacements. In: Orthopaedic Research Society Annual Meeting, March 28-31 2015, Las Vegas, NV, USA. (Submitted)

Senin, Nicola, Leach, Richard K., Pini, Stefano and Blunt, Liam A. (2015) Texture-based segmentation with Gabor filters, wavelet and pyramid decompositions for extracting individual surface features from areal surface topography maps. Measurement Science and Technology, 26 (9). 095405. ISSN 0957-0233

Whittaker, Robert, Hothi, Harry, Meswania, Jay, Bills, Paul J., Racasan, Radu, Eskelinen, Antti, Blunn, Gordon, Skinner, John and Hart, A. J. (2015) 36mm Metal-on-Metal Hips have Similar Taper Material Loss Rates as Larger Diameter Hips from the Same Manufacturer. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 24-28 2015, Las Vegas, NV, USA. (Submitted)

2014

Bills, Paul J., Racasan, Radu, Tessier, P and Blunt, Liam (2014) Methods to assess material loss of the modular taper interface in retrieved hip replacements. In: Structures Surfaces in Engineering, Metrology and Healthcare, 30th September 2014, NPL, Teddington, London, UK. (Unpublished)

Blunt, Liam, Elrawemi, Mohamed, Fleming, Leigh, Robbins, David and Muhamedsalih, Hussam (2014) In-line metrology for defect assessment on large area Roll 2 Roll substrates. In: 11th IMEKO TC14 Symposium on Laser Metrology for Precision Measurement and Inspection in Industry (LMPMI 2014). Curran Associates, pp. 1-6. ISBN 9781632667311

Elrawemi, Mohamed, Blunt, Liam and Fleming, Leigh (2014) Metrology and Characterisation of Defects on Barrier Layers for Thin Film Flexible Photovoltaics. In: Proceedings of EUSPEN 14th International Conference 2014. EUSPEN, Dubrovnik, Croatia, pp. 165-168. ISBN 978-0-9566790-3-1

Elrawemi, Mohamed, Muhamedsalih, Hussam, Blunt, Liam, Fleming, Leigh, Martin, Haydn and Jiang, Xiang (2014) Comparative study between online and offline defect assessment methods for roll to roll flexible PV modules. In: 4th International Conference on Nanomanufacturing (nanoMan2014), 8-10 July, Bremen, Germany.

Hothi, Harry, Bills, Paul J., Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, Alister J (2014) Bearing Surface Changes Of Retrieved MOM Hips Predict Factors Associated With Failure. In: 15th European Federation of National Associations of Orthopaedics and Traumatology (EFORT) Congress, 4-6 June 2014, London, UK. (Submitted)

Kumar, Prashant, Martin, Haydn, Maxwell, G and Jiang, Xiang (2014) Hybrid photonic chip interferometer for embedded metrology. In: Proceedings of SPIE: Integrated Optics: Devices, Materials, and Technologies XVIII. SPIE, California, USA, 89880N.

Martin, Haydn, Kumar, Prashant and Jiang, Xiangqian (2014) A hybrid photonics based sensor for surface measurement. CIRP Annals - Manufacturing Technology, 63 (1). pp. 549-552. ISSN 0007-8506

Plowucha, Wojciech, Jakubiec, Wladyslaw, Humienny, Zbigniew, Hausotte, Tino, Savio, Enrico, Dragomir, Mihai, Bills, Paul J., Marxer, Michael, Wisla, Norbert and Mathieu, Luc (2014) Geometrical Product Specification and Verification as toolbox to meet up-to-date technical requirements. In: The 11th International Scientific Conference “COORDINATE MEASURING TECHNIQUE” CMT 2014,, 2nd - 4th April 2014, Bielsko-Biala, Poland. (Unpublished)

Whittaker, R, Hexter, A, Hothi, H, Panagiotidou, A, Bills, Paul J., Skinner, John and Hart, A. J. (2014) Component Size Mismatch of Metal on Metal Hip Arthroplasty: An Avoidable Never Event. Journal of Arthroplasty, 29 (8). pp. 1629-1634. ISSN 0883-5403

Whittaker, Robert, Hothi, Harry, Hexter, Adam, Henckel, Johann, Panagiotidou, Anna, Bills, Paul J., Blunn, Gordon, Skinner, John and Hart, Alister (2014) Component Size Mismatch Of Metal On Metal Hip Arthroplasty: An Avoidable Never Event. In: 15th European Federation of National Associations of Orthopaedics and Traumatology (EFORT) Congress, 4-6 June 2014, London, UK. (Submitted)

Williamson, James, Martin, Haydn and Jiang, Xiang (2014) Phase Calculation of Spectral Interferograms using Template Matching. In: Manufacturing the Future Conference 2014, 23rd – 24th September 2014, University of Strathclyde. (Unpublished)

2013

Bills, Paul J., Racasan, Radu, Tessier, P and Blunt, Liam (2013) Assessing the wear of the modular taper interface in retrieved metal-on-metal hip replacements. In: 14th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2013), June 17-21, 2013, Taipei, Taiwan. (Unpublished)

Blunt, Liam, Elrawemi, Mohamed, Fleming, Leigh, Martin, Haydn, Muhamedsalih, Hussam and Robbins, David (2013) Development of the basis for in process metrology for roll to roll production of flexible photovoltaics. In: Proceedings of the 11th IMEKO TC14 Symposium on Laser Metrology for Precision Measurement and Inspection in Industry. International Measurement Confederation (IMEKO), Gdansk, Poland, pp. 363-366. ISBN 978-1-63266-817-2

Blunt, Liam, Elrawemi, Mohamed, Fleming, Leigh, Martin, Haydn, Muhamedsalih, Hussam and Robbins, David (2013) Metrology for in process metrology for roll to roll production of flexible photovoltaics. In: Metrology Technologies to Enable Reel to Reel Processing of Emerging Products, November 20, 2013, National Physical Laboratory , Teddington, Middlesex, UK.. (Unpublished)

Blunt, Liam, Fleming, Leigh, Elrawemi, Mohamed, Robbins, David and Muhamedsalih, Hussam (2013) In-line metrology of functional surfaces with a focus on defect assessment on large area Roll to Roll substrates. In: Proceedings of the 13th international conference of the european society for precision engineering and nanotechnology. EUSPEN, Germany, Berlin, pp. 71-74. ISBN 13:978-0-9566790-2-4

Ding, Hao, Scott, J. Paul and Jiang, Xiang (2013) Relational Structure of Measurement with Application on Specification of Freeform Surface. In: Proceedings of the The 11th International Symposium on Measurement Technology and Intelligent Instruments. ISMTII 2013 . Apprimus Wissenschaftsver, Aachen and Braunschweig, Germany. ISBN 978-3-86359-138-0

Ding, Hao, Scott, Paul J. and Jiang, Xiang (2013) Inverse problems of measurement with application on specification of surface profile. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 229. ISBN 9781862181212

Elrawemi, Mohamed, Blunt, Liam and Fleming, Leigh (2013) Metrology and Characterisation of Micro and Nano-scale Defects for Aluminium Oxide Barrier Film Employed in Flexible Photovoltaic Modules. In: Manufacturing the Future Conference September 2013. UKMTFC 2013 . EPSRC, Cranfield, UK. ISBN 978-1-907413-22-3

Elrawemi, Mohamed, Blunt, Liam and Fleming, Leigh (2013) Process Practice and its Effects on Surface Defects on Flexible PV Barrier Films. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 49-54. ISBN 9781862181212

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh and Sweeney, Francis (2013) Further Development of Surface Metrology Methods for Predicting the Functional Performance of Flexible PV Barrier Films. Surface Topography: Metrology and Properties, 1 (1). 015006. ISSN 2051-672X

Fleming, Leigh, Racasan, Radu, Bills, Paul J., Skinner, John, Hart, Alister J and Blunt, Liam (2013) Characterisation of wear morphology at the head-cup bearing interface in retrieved metal-on-metal hip replacements. In: International Society for Technology in Arthroplasty 26th Annual Congress, 16-19 October 2013, Palm Beach, Florida, USA. (Unpublished)

Hart, A. J., Matthies, Ashley K, Racasan, Radu, Bills, Paul J., Panagiotidou, A, Blunt, Liam, Blunn, Gordon and Skinner, John (2013) Taper wear contributes only a third of the total volumetric material loss in large head metal on metal hip replacement. Bone and joint journal: Orthopaedic Proceedings, 95-B (Sup 13). p. 14. ISSN 1358-992X

Hassan, Mothana A., Martin, Haydn and Jiang, Xiang (2013) Investigations on measurement speed of spatially dispersed short coherence interferometer. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 43-48. ISBN 9781862181212

Hexter, A., Matthies, Ashley K., Bills, Paul J., Skinner, John and Hart, A.J. (2013) Volumetric material loss in metal-on-metal total hip arthroplasty: Bearing surface wear versus taper corrosion. British Journal of Surgery, 100 (s4). p. 42. ISSN 0007-1323

Hothi, Harry, Cro, Suzie, Bills, Paul J., Blunt, Liam, Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, A. J. (2013) Correlation Between the Detailed Visual Inspection of Retrieved Metal-on-Metal Hips and Their Volumetric Wear. Bone and joint journal: Orthopaedic Proceedings, 95-B (Sup 34). p. 78. ISSN 1358-992X

Hothi, H, Cro, Suzie, Bills, Paul J., Blunt, Liam, Racasan, Radu, Blunn, Gordon, Skinner, J. and Hart, Alister J (2013) Correlation between the detailed visual inspection of retrieved metal-on-metal hips and their volumetric wear. In: International Society for Technology in Arthroplasty 26th Annual Congress, 16-19 October 2013, Palm Beach, Florida, USA. (Unpublished)

Hothi, H, Matthies, Ashley K, Berber, R, Whittaker, R, Bills, Paul J., Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, A. J. (2013) The reliability of a semi-quantitative scoring method for taper corrosion and fretting, and its usefulness for predicting the volume of material loss. In: International Society for Technology in Arthroplasty 26th Annual Congress, 16-19 October 2013, Palm Beach, Florida, USA.

Jiang, Xiangqian, Abdul-Rahman, Hussein S. and Scott, Paul J. (2013) Multi-scale freeform surface texture filtering using a mesh relaxation scheme. Measurement Science and Technology, 24 (11). ISSN 0957-0233

Kumar, Prashant, Martin, Haydn, Maxwell, G. and Jiang, Xiang (2013) Design of a dispersive lateral scanning surface profilometer. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 159-164. ISBN 9781862181212

Li, Tukun, Blunt, Liam A., Jiang, Xiangqian and Zeng, Wenhan (2013) An Information Model for Surface Metrology. Procedia CIRP, 10. pp. 251-258. ISSN 2212-8271

Martin, Haydn and Jiang, Xiangqian (2013) Dispersed reference interferometry. CIRP Annals - Manufacturing Technology, 62 (1). pp. 551-554. ISSN 0007-8506

Matthies, Ashley K, Racasan, Radu, Bills, Paul J., Panagiotidou, A, Skinner, John, Blunn, Gordon and Hart, A. J. (2013) Corrosion is the main mechanism of material loss at the taper junction of large head metal on metal hip replacements. Bone and joint journal: Orthopaedic Proceedings, 95-B (Sup 13). p. 13. ISSN 1358-992X

Matthies, Ashley K, Racasan, Radu, Bills, Paul J., Blunt, Liam, Cro, Suzie, Panagiotidou, Anna, Blunn, Gordon, Skinner, John and Hart, Alister J (2013) Material Loss at the Taper Junction of Retrieved Large Head Metal-on-Metal Total Hip Replacements. Journal of Orthopaedic Research, 31 (11). pp. 1677-1685. ISSN 0736-0266

McHugh, M, Bills, Paul J. and Vanin, Stefano (2013) PMI estimation in submerged bones: a new strategy. In: International Conference on Forensic Sciences, 8th-9th July 2013, London. (Unpublished)

Moschetti, Giuseppe (2013) Development of on-line interferometric metrology techniques for high dynamic range surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 235. ISBN 9781862181212

Qi, Qufen, Jiang, Xiang, Scott, Paul J. and Lu, Wenlong (2013) Surface texture specification, the more complete the better? Procedia CIRP, 10. pp. 233-237. ISSN 2212-8271

Racasan, Radu, Fleming, Leigh, Bills, Paul J., Skinner, John, Hart, A. J. and Blunt, Liam (2013) Characterisation of Wear Morphology at the Head Cup Bearing Interface in Retrieved Metal-on-Metal Hip Replacements. Bone and joint journal: Orthopaedic Proceedings, 95-B (Sup 34). p. 488. ISSN 1358-992X

Ren, Hongyu, Jiang, Xiang and Gao, F. (2013) Simulation of Tri-sensor Deflectometry for Freeform and Structured Specular Surfaces. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 236. ISBN 9781862181212

Tang, Dawei, Gao, F. and Jiang, Xiang (2013) Spectral Domain Low- Coherence Interferometry for On-line Surface Inspection. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 194-199. ISBN 9781862181212

Tong, Zhen, Luo, Xichun, Blunt, Liam and Jiang, Xiang (2013) An atomistic investigation of FIB process damage on diamond. In: The 13th International EUSPEN Conference & Exhibition, 27th-30th May 2013, Berlin, Germany.

Williamson, James, Martin, Haydn and Jiang, Xiang (2013) High Resolution Dispersed Reference Interferometry. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 212-217. ISBN 9781862181212

2012

Abdul-Rahman, Hussein S., Jiang, Xiangqian and Scott, Paul J. (2012) Freeform surface filtering using the lifting wavelet transform. Precision Engineering, 37 (1). pp. 187-202. ISSN 01416359

Bills, Paul J., Underwood, R.J., Cann, P. and Hart, A. J. (2012) What is required to measure the wear of explanted metal on metal hips? Bone and joint journal: Orthopaedic Proceedings, 94-B (Sup 18). p. 100. ISSN 1358-992X

Bills, Paul J. and Blunt, Liam (2012) Measurement of Bearing Surfaces. In: Metal-on-Metal Hip Replacements: Re-solving The Uncertainties, 28th May 2012, Royal College of Surgeons of England, London.

Bills, Paul J., Lou, Shan and Jiang, Xiang (2012) Development of morphological filtering method for specification and characterisation of hip replacement taper junctions. In: 12th International Conference of the European Society for Precision Engineering and Nanotechnology, 4th-8th June 2012, Stockholm, Sweden.

Bills, Paul J., Racasan, Radu, Hart, A. J., Skinner, J. and Blunt, Liam (2012) Accurate determination of clinical wear in retrieved metal-on-metal hip replacement joints. In: Euro-Mediterranean Conference on Bioengineering and Biomaterials, 4th-6th July 2012, Fes, Morocco. (Unpublished)

Bills, Paul J., Racasan, Radu, Hart, A.J., Skinner, J., Jiang, Xiang and Blunt, Liam (2012) Using metrology to bridge the gap in understanding between engineering and biological failure: the case of metal-on-metal hip replacements. In: 1st Annual EPSRC Manufacturing the Future Conference, 19th-20th September 2012, Loughborough, UK.

Bills, Paul J., Racasan, Radu, Skinner, J., Hart, A.J. and Blunt, Liam (2012) Effect of Uncertainty on Wear Measurement of Metal-on-metal Total Hip Replacement Components. In: ASTM Symposium on Metal-on-Metal Total hip Replacement Devices, 8th May 2012, Phoenix, AZ, USA. (Unpublished)

Bills, Paul J., Racasan, Radu, Underwood, R.J., Cann, P., Skinner, J., Hart, A.J., Jiang, Xiang and Blunt, Liam (2012) Volumetric wear assessment of retrieved metal-on-metal hip prostheses and the impact of measurement uncertainty. Wear, 274. pp. 212-219. ISSN 0043-1648

Blunt, Liam, Bills, Paul J. and Racasan, Radu (2012) Measurement of Tapers. In: Metal-on-Metal Hip Replacements: Re-solving The Uncertainties, 28th May 2012, Royal College of Surgeons of England, London.

Blunt, Liam, Robbins, David, Leach, Richard, Fleming, Leigh and Elrawemi, Mohamed (2012) Surface defects in water vapour barrier layers for structured plastic electronics. In: Tropical Meeting Structured & Freeform Surfaces, 5th-6th December 2012, National Physical Laboratory, Teddington, UK.

Blunt, Liam and Scott, Paul J. (2012) Characterisation of structured geometry surfaces features on micro and nano scale surfaces. International Journal of Nanomanufacturing, 8 (5/6). pp. 359-371. ISSN 1746-9392

Ding, Hao and Scott, Paul J. (2012) Structure of Mathematical Morphology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 20-24. ISBN 978-1-86218-106-9

Gao, F., Muhamedsalih, Hussam and Jiang, Xiangqian (2012) Surface and thickness measurement of a transparent film using wavelength scanning interferometry. Optics Express, 20 (19). p. 21450. ISSN 1094-4087

Hart, A. J., Matthies, A.K., Racasan, Radu, Bills, Paul J., Panagiotidou, A., Blunt, Liam, Blunn, G. and Skinner, J. (2012) Taper wear contributes only a third of the total volumetirc material loss in large head metal on metal hip replacement. In: British Orthopaedic Research Society Annual Meeting, September 24th-25th 2012, London, UK. (Unpublished)

Hassan, Mothana A., Jiang, Xiang and Martin, Haydn (2012) Comparison of the fringe visibility created by zero and first order diffracted beams in a dispersive interferometer. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 110-115. ISBN 978-1-86218-106-9

Hexter, A, Blunn, G, Bills, Paul J., Panagiotidou, A, Matthies, A, Skinner, JA and Hart, AJ (2012) The Definition of Taper Failure in Metal-On-Metal Modular Total Hip Replacement. In: ASTM Symposium on Metal-on-Metal Total Hip Replacement Devices, 8th May 2012, Phoenix, AZ, USA. (Submitted)

Joyce, N.J., Fleming, Leigh, Sisodia, Gurudatt, Elnaggar, Mohamed, Chakrabarty, Guatam and Blunt, Liam (2012) Does cementing the tibial keel and peg in a knee replacement affect the pull out strength of the tibial component from the bone - A biomedical study of two cementation techniques. In: EFORT Congress 2012, 23 - 25 May 2012, Berlin. (Unpublished)

Kumar, Prashant, Martin, Haydn, Maxwell, Graeme and Jiang, Xiang (2012) Design and Development of a Self Calibrated Optical Chip Interferometer for High Precision On-line Surface Measurement. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 14-19. ISBN 978-1-86218-106-9

Kumar, Prashant, Martin, Haydn, Maxwell, Graeme and Jiang, Xiang (2012) Design and development of a self calibrated optical chip interferometer for high precision on-line surface measurement. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 152. ISBN 978-1-86218-106-9

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2012) An Introduction to Morphological Filters in Surface Metrology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 7-13. ISBN 978-1-86218-106-9

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2012) Algorithms for morphological profile filters and their comparison. Precision Engineering, 36 (3). pp. 414-423. ISSN 01416359

Lou, Shan, Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2012) Comparison of Robust Filtration Techniques in Geometrical Metrology. In: 18th International Conference on Automation and Computing (ICAC) 2012. IEEE, Leicestershire, UK, pp. 1-6. ISBN 978-1-4673-1722-1

Matthies, A.K., Racasan, Radu, Bills, Paul J., Panagiotidou, A, Blunt, Liam, Skinner, J., Blunn, G and Hart, A. J. (2012) Corrosion is the main mechanism of material loss at the taper junction of large head metal on metal hip replacements. In: British Orthopaedic Society Annual Meeting, September 24th-25th 2012, London, UK. (Unpublished)

Scott, Paul J. and Forbes, Alistair B. (2012) Mathematics for modern precision engineering. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 4066-4088. ISSN 1364-503X

Senin, N., Blunt, Liam and Tolley, M. (2012) Dimensional metrology of micro parts by optical three-dimensional profilometry and areal surface topography analysis. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (11). pp. 1819-1832. ISSN 0954-4054

Senin, Nicola, Blunt, Liam and Tolley, Martin (2012) The use of areal surface topography analysis for the inspection of micro-fabricated thin foil laser targets for ion acceleration. Measurement Science and Technology, 23 (10). p. 105004. ISSN 0957-0233

Tian, Yuan, Wang, Jian, Peng, Zhongxiao and Jiang, Xiang (2012) A new approach to numerical characterisation of wear particle surfaces in three-dimensions for wear study. Wear, 282-3. pp. 59-68. ISSN 0043-1648

Wang, J., Jiang, Xiang, Blunt, Liam, Leach, R.K. and Scott, Paul J. (2012) A boundary segmentation algorithm for extracting microscale dimensional parameters in the measurement of structured surfaces. In: euspen 12th International Conference and Exhibition, 4 - 8 June 2012, Stockholm, Sweden. (Unpublished)

Wang, Jian, Jiang, Xiang, Blunt, Liam, Leach, Richard K. and Scott, Paul J. (2012) Intelligent sampling for the measurement of structured surfaces. Measurement Science and Technology, 23 (8). ISSN 0957-0233

Zeng, S., Blunt, Liam and Jiang, Xiang (2012) Material removal investigation in bonnet polishing of CoCr alloy. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 25-30. ISBN 978-1-86218-106-9

Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2012) Diffusion filtration for the evaluation of MEMs surface. In: ISMTII 2011, 29th June - 2nd July 2011, Kaist, Daejeon, South Korea.

Zhang, Hongyu, Blunt, Liam, Jiang, Xiang, Fleming, Leigh and Barrans, Simon (2012) The influence of bone cement type on production of fretting wear on the femoral stem surface: A preliminary study. Clinical Biomechanics, 27 (7). pp. 666-672. ISSN 0268-0033

2011

Bills, Paul J. and Blunt, Liam (2011) Wear Measurement of MoM Hips. In: Orthopaedic Research UK Meeting – Metal-on-Metal Hip Replacements: Solving The Uncertainties, 14th December 2011, Royal College of Surgeons, London, UK. (Submitted)

Bills, Paul J., Underwood, R.J., Sayles, R.S., Cann, P.M., Hart, A, Blunt, Liam and Jiang, Xiang (2011) Taper Wear in Large Head Metal-on-Metal Hips. In: International Conference on BioTribology 2011, 18th - 21th September 2011, Imperial College. (Unpublished)

Blunt, Liam and Xiao, Shaojun (2011) The Use of Surface Segmentation Methods to Characterise Laser Zone Surface Structure on Hard Disc Drives. Wear, 271 (3-4). pp. 604-609. ISSN 0043-1648

Gao, F., Jiang, Xiang, Muhamedsalih, Hussam and Martin, Haydn (2011) Wavelength scanning interferometry for measuring transparent films of the fusion targets. In: 13th International Conference on Metrology and Properties of Engineering Surfaces 2011, 12th - 15th April 2011, Twickenham, UK.

Jiang, Xiang (2011) In situ real-time measurement for micro-structured surfaces. CIRP Annals - Manufacturing Technology, 60 (1). pp. 563-566. ISSN 0007-8506

Jiang, Xiang, Cooper, Philip and Scott, Paul J. (2011) Freeform surface filtering using the diffusion equation. Proceedings of the Royal Society, A, 467 (2127). pp. 841-859. ISSN 1364-5021

Jiang, Xiang, Lou, Shan and Scott, Paul J. (2011) Morphological method for surface metrology and dimensional metrology based on the alpha shape. Measurement Science and Technology, 23 (1). 015003. ISSN 0957-0233

Jiang, Xiang and Martin, Haydn (2011) Phase feedback fibre interferometer for surface profiling. International Journal of Precision Technology, 2 (2/3). pp. 246-265. ISSN 1755-2060

Jiang, Xiang, Zeng, Wenhan and Scott, Paul J. (2011) Wavelet Analysis for the Extraction of Morphological Features for Orthopaedic Bearing Surfaces. In: Progress in Molecular and Environmental Bioengineering - From Analysis and Modeling to Technology Applications. InTech, London. ISBN 9789533072685

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2011) Morphological Filters Based on Motif Combination for Functional Surface Evaluation. In: Proceedings of the 17th International Conference on Automation & Computing, 10 September 2011, University of Huddersfield, Huddersfield.

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2011) Fast Algorithm for Morphological Filters. Journal of Physics: Conference Series, 311. p. 284. ISSN 1742-6596

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2011) Acceleration computing process in wavelength scanning interferometry. In: 10th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2011), 29th June - 2nd July 2011, Daejeon, S. Korea. (Unpublished)

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2011) Comparison of fast Fourier transform and convolution in wavelength scanning interferometry. In: Proceedings of SPIE Volume 8082. SPIE Optical Metrology, 80820Q-80820Q.

Muller, Matthias, Barrans, Simon and Blunt, Liam (2011) Predicting Plastic Deformation and Work Hardening during V-Band Formation. Journal of Materials Processing Technology, 211 (4). pp. 627-636. ISSN 0924-0136

Thomas, T.R., Rosén, B.-G., Zahouani, H., Blunt, Liam and Mansori, M. El (2011) Traceology, quantifying finishing machining and function: a tool and wear mark characterisation study. Wear, 271 (3/4). pp. 553-558. ISSN 00431648

Wang, Jian, Jiang, Xiangqian, Blunt, Liam, Leach, Richard K. and Scott, Paul J. (2011) Efficiency of adaptive sampling in surface texture measurement for structured surfaces. In: The 13th International Conference on Metrology and Properties of Engineering Surfaces, 12-15 April 2011, National Physical Laboratory, Teddington, UK.

Wang, Jian, Jiang, Xiangqian, Gurdak, Elzbieta, Scott, Paul J., Leach, Richard, Tomplins, Paul and Blunt, Liam (2011) Numerical characterisation of biomedical titanium surface texture using novel feature parameters. Wear, 271 (7-8). pp. 1059-1065. ISSN 0043-1648

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2011) A Generalised Linear and Nonlinear Spline filter. Wear, 271 (3/4). pp. 544-547. ISSN 0043-1648

Zhang, Hao, Shi, Zhanqun, Gu, Fengshou and Ball, Andrew (2011) Modelling of Outer and Inner Film Oil Pressure for Floating Ring Bearing Clearance in Turbochargers. Journal of Physics: Conference Series, 305 (1). 012021. ISSN 1742-6596

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) A Minimax Fitting Algorithm for Ultra-Precision Aspheric Surfaces. In: The 13th International Conference on Metrology and Properties of Engineering Surfaces, 12-15 April 2011, National Physical Laboratory, Teddington, UK. (Unpublished)

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) A Reliable Method of Minimum Zone Evaluation of Cylindricity and Conicity from Coordinate Measurement Data. Precision Engineering, 35 (3). pp. 484-489. ISSN 0141-6359

2010

Bills, Paul J., Underwood, R.J., Cann, P., Hart, A, Jiang, Xiangqian and Blunt, Liam (2010) What is required to measure the wear of explanted metal-on-metal hips? In: British Orthopaedic Research Society Annual Meeting, 12th-13th July 2010, Cardiff University.

Blunt, Liam and Li, T. (2010) Evaluation of Measurement Uncertainty. Quality Manufacturing Today (March).

Gao, F., Jiang, Xiang, Muhamedsalih, Hussam and Martin, Haydn (2010) Wavelength Scanning Interferometry for Thin Film Analysis of Fusion Target. In: 3rd European Target Fabrication Workshop, 30 September-1 October, Oxford. (Unpublished)

Jiang, Xiang (2010) Robust solution for the evaluation of stratified functional surfaces. CIRP Annals - Manufacturing Technology, 59 (1). pp. 573-576. ISSN 0007-8506

Jiang, Xiang, Gao, F. and Mateboer, A. (2010) An approach of assessment for ultra-precision V-groove structured surfaces. In: Proceedings of the euspen International Conference – Delft - June 2010. European Society for Precision Engineering & Nanotechnology, Delft, Netherlands.

Jiang, Xiang, Gao, F. and Wang, Kaiwei (2010) Wavelength Scanning Interferometer for Structured Surfaces. In: ASPE Summer Topical Meeting on Precision Interferometric Metrology, 23rd - 25th June 2010, Asheville, North Carolina, USA.

Jiang, Xiang, Wang, Kaiwei, Gao, F. and Muhamedsalih, Hussam (2010) Fast surface measurement using wavelength scanning interferometry with compensation of environmental noise. Applied Optics, 49 (15). pp. 2903-2909. ISSN 1559-128X

Jiang, Xiang, Zhang, Xiangchao and Scott, Paul J. (2010) Template matching of freeform surfaces based on orthogonal distance fitting for precision metrology. Measurement Science and Technology, 21 (4). 045101. ISSN 0957-0233

Kong, L., Cheung, B., Jiang, Xiang, Lee, W., To, S., Blunt, Liam and Scott, Paul J. (2010) Characterization of Surface Generation of Optical Microstructures Using a Pattern and Feature Parametric Analysis Method. Precision Engineering, 34 (4). pp. 755-766. ISSN 0141-6359

Lan, Xiangqi, Blunt, Liam and Xiao, Shaojun (2010) Building a Flexible Surface Characterisation System Architecture. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 43-47. ISBN 9781862180932

Leach, Richard K., Li, Tukun, Jiang, Xiang and Blunt, Liam (2010) Comparison of commercial software packages for calculating surface texture parameters. In: Proceedings of the euspen International Conference, Monday 31st May - Friday 4th June 2010, Delft, Holland. (Submitted)

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2010) A Fast Algorithm for Morphological Filters. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 190. ISBN 9781862180932

Lu, Wenlong, Jiang, Xiang, Qi, Qufen and Scott, Paul J. (2010) Modeling the integration between specifications and verification for cylindricity based on category theory. Measurement Science and Technology, 21 (11). ISSN 0957-0233

Martin, Haydn (2010) Investigations into a multiplexed fibre interferometer for on-line, nanoscale, surface metrology. Doctoral thesis, University of Huddersfield.

Martin, Haydn and Jiang, Xiang (2010) Rapid phase shifting fiber interferometer with optical stylus. Optical Letters, 35 (5). pp. 655-657. ISSN 0146-9592

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2010) Vibration compensation of wavelength scanning interferometer for in-process surface inspection. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 148-153. ISBN 9781862180932

Qi, Qufen, Blunt, Liam, Scott, Paul J. and Jiang, Xiang (2010) Modeling of the concepts in ISO standards for profile surface texture. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 172-176. ISBN 9781862180932

Qi, Qunfen, Jiang, Xiangqian, Liu, Xiaojun and Scott, Paul J. (2010) An unambiguous expression method of the surface texture. Measurement, 43 (10). pp. 1398-1403. ISSN 0263-2241

Wang, Jian, Jiang, Xiang and Blunt, Liam (2010) Simulation of Adaptive Sampling in Profile Measurement for Structured Surfaces. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 48-53. ISBN 9781862180932

Wilkinson, Adam, Chen, Xun and Blunt, Liam (2010) Experimentation to Reduce Friction from Novel Abrasive Tape Polishing Method. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 54-59. ISBN 9781862180932

Xu, Yuanping, Xu, Zhijie, Jiang, Xiang and Paul, Scott (2010) Developing a Knowledge-based System for Complex Geometrical Product Specification (GPS) Data Manipulation. Knowledge Based Systems, 24 (1). pp. 10-22. ISSN 0950-7051

Zeng, Shengye, Blunt, Liam, Jiang, Xiang and Bills, Paul J. (2010) Investigation of the material removal characteristic for polishing CoCr alloy. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 177-182. ISBN 9781862180932

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2010) Fast algorithm of the Robust Gaussian Regression Filter for Areal Surface Analysis. Measurement Science and Technology, 21 (5). 055108. ISSN 0957-0233

Zeng, Wenhan, Jiang, Xiang, Smith, I and Scott, Paul J. (2010) Transient Signal Separation in Watt Balance Experiments. Physics Letters A, 374 (11-12). pp. 1301-1306. ISSN 0375-9601

Zhang, Hao, Shi, John Z., Gu, Fengshou and Ball, Andrew (2010) Bending vibration of an automotive turbocharger under the influence of rotor imbalance. In: CM 2010 and MFPT 2010 The 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England. (Unpublished)

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2010) Shape recognition and form error evaluation of quadric surfaces. In: Measurement Systems and Process Improvement (MSPI) 2010, 19-20, Apr, 2010, NPL, Teddington, UK. (Unpublished)

2009

Bills, Paul J. and Cunningham, J.L. (2009) Determination of clinical wear in retrieved total hip replacement joints using shadowgraph and co-ordinate measurement methods. In: Internatiional Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco. (Unpublished)

Blunt, Liam, Bills, Paul J., Jiang, Xiang, Hardacker, Catherine and Chakrararty, Gautum (2009) The role of tribology and metrology in the latest development of bio-materials. Wear, 266 (3-4). pp. 424-431. ISSN 0043-1648

Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2009) Precision and Nanoscale Surface Metrology. In: International Moulded Optics Conference,, 19-20th Nov 2009, Breman Germany. (Unpublished)

Blunt, Liam, Jiang, Xiang, Zeng, Wenhan and Asim, Taimoor (2009) A new way to evaluate steel sheet surfaces. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia. (Unpublished)

Brown, L., Zhang, H. and Blunt, Liam (2009) Investigation of a possible wear mechanism at the cement head interface in hip resurfacing arthroplasty. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco. (Submitted)

Gao, F., Jiang, Xiang and Blunt, Liam (2009) Automated ballistic and tool mark identification. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Gao, F., Wang, Kaiwei and Jiang, Xiang (2009) A high speed scanning heterodyne interferometer for in process surface measurement. In: Proceedings of the euspen International Conference – San Sebastian - June 2009. European Society for Precision Engineering & Nanotechnology, San Sebastian, Spain. ISBN 13:978-0-9553082-6-0

Jiang, Xiang (2009) The evolution of surfaces and their measurement. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia. (Unpublished)

Lan, Xiangqi, Jiang, Xiang, Blunt, Liam and Xiao, Shaojun (2009) An adaptive system framework for surface characterisation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 142-146. ISBN 9781862180857

Lan, Xiangqi, Jiang, Xiang, Blunt, Liam, Xiao, Shaojun and Xie, Fang (2009) Characterisation Platform For Surface Metrology. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Li, T., Blunt, Liam and Jiang, Xiang (2009) Uncertainty In Surface Roughness Measurement. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Li, T., Leach, Richard K., Jung, L, Jiang, Xiang and Blunt, Liam (2009) Comparison of Type F2 Software Measurement Standards for Surface Texture. Technical Report. National Physical Laboratory, UK, London, UK.

Lu, Wenlong, Jiang, Xiang, Scott, Paul J. and Lan, Xiangqi (2009) A Host System for Form Tolerance Specification in the Next-generation GPS based on AutoCAD. In: The 11th CIRP Conference on Computer Aided Tolerancing “Geometric Variations within Product Life-Cycle Management”, 26-27 March 2009, Annecy, France.

Martin, Haydn and Jiang, Xiang (2009) Phase Feedback Active Stabilisation Of A Multiplexed Fibre Interferometer. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2009) Interferograms analysis for wavelength scanning interferometer using convolution and fourier transform. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 33-37. ISBN 9781862180857

Muhamedsalih, Hussam, Jiang, Xiang and Wang, Kaiwei (2009) Surface Profile Height Measurement Using Optical Interferometry Method. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Müller, M. and Blunt, Liam (2009) Predicting The Axial Load Of Capacity Of Joints Formed By V-Band Retainers. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Sawsaa, Ahlam and Lu, Joan (2009) A Generic Model of Knowledge Mapping Through Virtual Communities of Practice in Information Science. In: University of Huddersfield Annual Research Festival School of Computing and Engineering 12th March 2010, 25th March 2009, University of Huddersfield.

Su, Yang, Xu, Zhijie and Jiang, Xiang (2009) Real-time VE Signal Extraction and Denoising Using Programmable Graphics Hardware. International Journal of Automation and Computing, 6 (4). pp. 326-334. ISSN 1476-8186

Wang, J, Jiang, Xiang and Blunt, Liam (2009) A survey of potential sampling strategies for measurement of structured surfaces. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 184-189. ISBN 9781862180857

Wang, Jian, Jiang, Xiang, Blunt, Liam and Leach, Richard K. (2009) Structured Surfaces, Measurements & Characterization. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Yang, Shuming (2009) A Chip Device For On-line Assessment In Nano-scale Surface Manufacture. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Yang, Shuming (2009) A novel chip interferometry system for online surface measurements. Doctoral thesis, University of Huddersfield.

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2009) A Generalised Linear and Nonlinear Spline filter. In: 12th International Conference on Metrology and Properties of Engineering Surfaces, 8-10 July 2009, Rzeszów, Poland. (Submitted)

Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2009) New Geometrical Filtratation For Ultra-Precision And Micro,Nano Manufactured Products. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Zeng, Wenhan, Jiang, Xiang, Scott, Paul J., Xiao, Shaojun and Blunt, Liam (2009) A Fast Algorithm for the High Order Linear and Nonlinear Gaussian Regression filter. In: Proceedings of the 9 th international conference of the european society for precision engineering and nanotechnology. euspen, San Sebastian, Spain, pp. 356-359. ISBN 978-0-9553082-6-0

Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2009) Evaluation Of Fretting Wear On The Femoral Stem Surface. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco.

Zhang, Hao (2009) Model-based Fault Detection For A Turbocharger. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Zhang, Hongyu, Brown, L., Blunt, Liam and Barrans, Simon (2009) Evaluation of fretting wear on the femoral stem surface. In: International Conference on Bioengineering & Biomaterials, 18-29 March, Meknes, Moroco.

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2009) The Orthogonal Distance Fitting Of Parametric Surfaces For Precision Coordinate Metrology. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2009) A new free-form surface fitting method for precision coordinate metrology. Wear, 266 (5-6). pp. 543-547. ISSN 0043-1648

Zhang, Xiangchao, Jiang, Xiang, Scott, Paul J. and Cooper, Philip (2009) A Fast Point Projection Approach of NURBS surfaces. In: A4A6 - Algorithms for Approximation VI 2009, 31st August - 4th September 2009, Ambleside, UK. (Unpublished)

Zhu, Hao, Blunt, Liam and Jiang, Xiang (2009) An Active Contour Based Algorithm for Micro-scale Surface Feature Extraction. In: The Swedish Production Symposium, 2-3 December 2009, Göteborg, Sweden.

Zhu, Hao, Blunt, Liam and Jiang, Xiang (2009) Flexible shape extraction for micro/nano scale structured surfaces. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 190-194. ISBN 9781862180857

Zhu, Hao, Blunt, Liam, Jiang, Xiang and Shaojun, Xiao (2009) Measurement and characterisation of micro nano-scale structured surfaces. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Zhu, Hao, Blunt, Liam, Jiang, Xiang and Xiao, Shaojun (2009) Recognition of Features from Micro Scale Patterned Surfaces. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia.

2008

Bills, Paul J., Blunt, Liam and Chakrabarty, G. (2008) Developing techniques for the dimensional assessment of true clinical wear in retrieved total joint replacements. In: Materials for Improved Wear Resistance of Total Artificial Joints. Tekniker, Eibar, Spain, pp. 109-118. ISBN 978-84-932064-4-4

Blunt, Liam, Bills, Paul J., Jiang, Xiang and Chakrabarty, G. (2008) Improvement in the assessment of wear of total knee replacements using coordinate-measuring machine techniques. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 222 (3). pp. 309-318. ISSN 0954-4119

Blunt, Liam, Zhang, H., Barrans, Simon and Brown, L. (2008) The Relative Contribution of Micropores and Shrinkage Bumps on Cement Surface to Fretting Wear on polished Stems. In: 35th Leeds-Lyon Symposium on Tribology, 9th-12th September 2008, Leeds. (Submitted)

Blunt, Liam, Zhang, Hongyu, Barrans, Simon, Jiang, Xiang and Brown, Leigh (2008) What results in fretting wear on polished femoral stems. Tribology International, 42 (11). pp. 1605-1614. ISSN 0301-679X

Brown, L. and Blunt, Liam (2008) Surface Metrology for the Automotive Industry. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Gao, F., Leach, Richard K., Petzing, J and Coupland, J. M. (2008) Surface Measurement Errors using Commercial Scanning White Light Interferometers. Measurement Science and Technology, 19 (1). 015303. ISSN 0957-0233

Jiang, Xiang, Gu, Fengshou and Ball, Andrew (2008) Automotive Diesel Engine Performance and Condition Monitoring using Downpipe Acoustic Waveform Analysis. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Jiang, Xiang, Scott, Paul J. and Whitehouse, D.J. (2008) Wavelets and their applications for surface metrology. CIRP Annals - Manufacturing Technology, 57 (1). pp. 555-558. ISSN 0007-8506

Jiang, Xiang, Zeng, Wenhan, Scott, Paul J. and Ma, J.W. (2008) Linear feature extraction based on complex ridgelet transform. Wear, 264 (5-6). pp. 428-433. ISSN 0043-1648

Li, T., Jiang, Xiang, Blunt, Liam, Scott, Paul J. and Xiao, Shaojun (2008) The Design and Use of F1 Softgauges for Validating Surface Metrology Software. Key Engineering Materials, 381-38. pp. 643-646. ISSN 1013-9826

Lobera, L, Gao, F., Petzing, J and Coupland, J. M. (2008) Limitations and Innovations in Scanning White Light Interferometry. In: euspen 10th Anniversary International Conference, 18-22 May 2008, Zurich, Switzerland,.

Lu, Wenlong, Jiang, Xiang, Liu, X.J. and Xu, Zhijie (2008) Compliance uncertainty of diameter characteristic in the next-generation geometrical product specifications and verification. Measurement Science and Technology, 19 (10). pp. 105103-1. ISSN 0957-0233

Martin, Haydn and Jiang, Xiang (2008) Stabilising fibre interferometers. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 75-80. ISBN 978-1-86218-067-3

Martin, Haydn, Wang, Kaiwei and Jiang, Xiang (2008) Vibration compensating beam scanning interferometer for surface measurement. Applied Optics, 47 (7). pp. 888-893. ISSN 0003-6935

Peng, H.P., Jiang, Xiang and Liu, X.J. (2008) Concurrent optimal allocation of design and process tolerances for mechanical assemblies with interrelated dimension chains. International Journal of Production Research, 46 (24). pp. 6963-6979. ISSN 00207543

Peng, H.P., Jiang, Xiang, Xu, Zhijie and Liu, X.J. (2008) Optimal tolerance design for products with correlated characteristics by considering the present worth of quality loss. International Journal of Advanced Manufacturing Technology, 39 (1-2). pp. 1-8. ISSN 0268-3768

Su, Yang, Xu, Zhijie and Jiang, Xiang (2008) GPGPU-based Gaussian Filtering for Surface Metrological Data Processing. In: Information Visualisation, 2008. IV apos;08. 12th International Conference. Information Visualisation, 2008. IV apos;08. 12th International Conference, pp. 94-99.

Su, Yang, Xu, Zhijie and Jiang, Xiang (2008) Stream-Based Data Filtering for Accelerating Metrological Data Characterization. In: Proceedings of the 14th International Conference on Automation and Computing. ICAC, pp. 81-85. ISBN 978-0-9555294-2-0

Su, Yang, Xu, Zhijie, Jiang, Xiang and Pickering, Jonathan (2008) Discrete wavelet transform on consumer-level graphics processing unit. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 40-47. ISBN 978-1-86218-067-3

Wang, Kaiwei, Martin, Haydn and Jiang, Xiang (2008) Actively stabilized optical fiber interferometry technique for online/in-process surface measurement. Review of scientific instruments, 79 (2). 023109. ISSN 0034-6748

Whitehouse, D.J. (2008) Nanometrology. Contemporary Physics, 49 (5). pp. 351-374. ISSN 00107514

Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2008) Category theory-based object-oriented data management for web-based virtual manufacturing. International Journal of Internet Manufacturing and Services, 1 (2). pp. 136-159. ISSN 1751-6048

Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2008) Implementation of a Category Theory-Based GPS Knowledge System for Product Design. In: The 14th International conference on Automation & Computing, Saturday, 6th September 2008,, ICAC 2008 Conference.

Xu, Yuanping, Xu, Zhijie, Jiang, Xiang, Scott, Paul J. and Pickering, Jonathan (2008) Evaluation on the categorical DBMS for the VirtualGPS knowledge system. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 81-86. ISBN 978-1-86218-067-3

Yang, Shuming and Jiang, Xiang (2008) The Roughness Measurement and Assessment of the Super-smooth Surface of Hard Disks. Key Engineering Materials, 364-36. pp. 1174-1179. ISSN 1013-9826

Yang, Shuming, Jiang, Xiang, Maxwell, Graeme and Wang, Kaiwei (2008) An integrated optical coupler used in a fibre interferometry system for on-line surface measurements. Optics Communications, 281 (5). pp. 1099-1107. ISSN 0030-4018

Yao, Shaowen, Barrans, Simon and Blunt, Liam (2008) Incompressible and Analytical Study on a Basic Model of Out-Pump Type Complex Journal Gas Bearings. Key Engineering Materials, 381-38. pp. 153-156. ISSN 1013-9826

Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2008) Investigation on the noise separation in watt balance experiments. Key Engineering Materials, 381-38. pp. 619-622. ISSN 1013-9826

Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2008) Morphological Component Analysis based Detection of Transient Behaviour in Environmental Vibration for the Watt Balance. In: 10th International Conference of the European Society for Precision Engineering and Nanotechnology, euspen, 18th-22nd May 2008, Kongresshaus Zurich.

Zhang, Hongyu, Blunt, Liam, Jiang, Xiang, Brown, Leigh, Barrans, Simon and Zhao, Y. (2008) Femoral stem wear in cemented total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 222 (5). pp. 583-592. ISSN 0954-4119

Zhang, Hongyu, Brown, Leigh and Blunt, Liam (2008) Static shear strength between polished stem and seven commercial acrylic bone cements. Journal of Materials Science Materials in Medicine, 19 (2). pp. 591-599. ISSN 0957-4530

Zhang, Hongyu, Brown, Leigh, Blunt, Liam and Barrans, Simon (2008) Influence of femoral stem surface finish on the apparent static shear strength at the stem–cement interface. Journal of Mechanical Behaviour of Biomedical Materials, 1 (1). pp. 96-104. ISSN 1751-6161

Zhang, Hongyu, Brown, Leigh, Blunt, Liam and Barrans, Simon (2008) An investigation on generation of debris at the stem cement interface. In: 8th World Biomaterials Congress, 28th May -1st June 2008, Amsterdam, The Netherlands. (Unpublished)

Zhang, Hongyu, Brown, Leigh, Blunt, Liam, Jiang, Xiang and Barrans, Simon (2008) Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacement. Wear, 266 (5-6). pp. 566-569. ISSN 0043-1648

Zhang, Xiangchao and Jiang, Xiang (2008) Numerical analyses of the boundary effect of radial basis functions in 3D surface reconstruction. Numerical Algorithms, 47 (4). pp. 327-339. ISSN 1017-1398

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2008) Orthogonal distance fitting of precision free form surfaces based on l1 norm. In: Conference on Advanced Mathematical and Computational Tools in Metrology and Testing, 23 – 25 June 2008, Paris, France.

Zhu, Hao, Xiao, Shaojun, Jiang, Xiang and Blunt, Liam (2008) MEMS microstructured surface characterisation based on wavelet transform techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 87-92. ISBN 978-1-86218-067-3

2007

Bills, Paul J. (2007) The development of a geometric methodology for the determination of volumetric wear in total joint replacements & development of a total knee replacement joint using new and novel measurement techniques. Doctoral thesis, University of Huddersfield.

Bills, Paul J., Blunt, Liam and Jiang, Xiang (2007) Development of a technique for accurately determining clinical wear in explanted total hip replacements. Wear, 263 (7-12). pp. 1133-1137. ISSN 0043-1648

Blunt, Liam (2007) Next Generation Surface Metrology: Structured and Freeform Surfaces. In: Asia Pacific Conference on Optics Manufacture 2007 (APCOM2007), 11 -13 January 2007, The Hong Kong Polytechnic University. (Unpublished)

Blunt, Liam (2007) The role of Tribology and Metrology in the Latest Development of Bio-materials. In: Proceedings of the European Conference on Tribology (ECOTRIB). Slovensko društvo za tribologijo, Ljubljana, Slovenia, pp. 465-482.

Blunt, Liam, Jiang, Xiang, Leach, Richard K., Harris, Peter M. and Scott, Paul J. (2007) The development of user-friendly software measurement standards for surface topography software assessment. Wear, 264 (5-6). pp. 389-393. ISSN 0043-1648

Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2007) A New Approach to Surface Metrology - Structured Surfaces. In: Proceedings of the 7th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen) - Bremen, Germany, 2007. euspen, Bremen, pp. 254-257. ISBN 978-0-9553082-2-2

Brown, Leigh, Zhang, H., Blunt, Liam and Barrans, Simon (2007) Reproduction of fretting wear at the stem—cement interface in total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 221 (8). pp. 963-971. ISSN 0954-4119

Charlton, P. and Blunt, Liam (2007) Surface and form metrology of polished “freeform” biological surfaces. Wear, 264 (5-6). pp. 394-399. ISSN 0043-1648

Gao, F., Petzing, J, Coupland, J. M. and Leach, Richard K. (2007) Measurement of structured surface using stylus, AFM and optical methods. In: Metrology and properties of engineering surfaces: proceedings of the 11th international conference, Huddersfield, on 17th-20th July 2007. University of Huddersfield, Huddersfield, UK, p. 363. ISBN 1862180571

Jiang, Xiang (2007) Foreword. In: Theory and Methodology of GPS. Cheung Kong Scholars Series . Higher Education Press, Beijing. ISBN 978-7-04-022489-4

Jiang, Xiang (2007) The economic management of geometrical products variability: the next generation GPS. In: 4th International CIRP-Sponsored Conference (DET2007) on Digital Enterprise Technology, 19-21 September 2007, University of Bath, UK. (Unpublished)

Jiang, Xiang, Martin, Haydn and Wang, Kaiwei (2007) Vibration compensating beam scanning interferometer for surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield.

Jiang, Xiang, Scott, Paul J. and Whitehouse, D.J. (2007) Freeform surface characterisation - a fresh strategy. CIRP Annals - 2007, 56 (1). pp. 553-556. ISSN 1726-0604

Jiang, Xiang, Scott, Paul J., Whitehouse, D.J. and Blunt, Liam (2007) Paradigm shifts in surface metrology. Part I. Historical philosophy. Proceedings of The Royal Society A Mathematical Physical and Engineering Sciences, 463 (2085). pp. 2049-2070. ISSN 1364-5021

Jiang, Xiang, Scott, Paul J., Whitehouse, D.J. and Blunt, Liam (2007) Paradigm shifts in surface metrology. Part II. The current shift. Proceedings of the Royal Society, A, 463 (2085). pp. 2071-2099. ISSN 1364-5021

Jiang, Xiang, Wang, Kaiwei, Martin, Haydn and Yang, Shuming (2007) Surface characteristic determining apparatus. WO2007144654.

Jiang, Xiang, Zeng, Wenhan, Smith, I., Scott, Paul J. and Maletras, F. (2007) The detection of transient behaviour in environmental vibration for the Watt balance. Measurement Science and Technology, 18 (5). pp. 1487-1494. ISSN 0957-0233

Li, T., Blunt, Liam, Jiang, Xiang, Scott, Paul J. and Xiao, X. (2007) On the accuracy of roughness parameters. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.

Li, T., Jiang, Xiang, Blunt, Liam, Scott, Paul J. and Xiao, Shaojun (2007) Comparison on F2 softgauges for surface texture. In: 1st European Conference on Tribology (ECOTRIB), June 12-15, 2007, Ljubljana, Slovenia.

Li, T., Jiang, Xiang, Blunt, Liam, Scott, Paul J. and Yao, Shaowen (2007) The Design and Use of F1 Softgauges for Validating Surface Metrology Software. In: The 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2007), 24-27 September 2007, Tohoku University, Sendai, Japan. (Unpublished)

Peng, H., Liu, X., Jiang, Xiang and Wang, Y. (2007) Concurrent tolerance design based on a comprehensive model of manufacturing cost-quality loss. In: 10th International Conference on Computer Aided Tolerancing, 21st-23rd March, 2007, Erlangen, Germany. (Unpublished)

Ramasawmy, Haree and Blunt, Liam (2007) Investigation of the effects of electrochemical polishing on EDM surfaces. International Journal of Manufacturing Technology and Management, 31 (11-12). pp. 1135-1147. ISSN 1368-2148

Rosen, B.G. and Blunt, Liam (2007) Adaptive evaluation of a time and information efficient surface sampling. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK. (Unpublished)

Scott, Paul J. (2007) Feature parameters. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.

Wang, Kaiwei, Jiang, Xiang and Martin, Haydn (2007) Advances of optical fibre interferometer for on-line surface measurement. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.

Wang, Kaiwei, Jiang, Xiang, Martin, Haydn and Blunt, Liam (2007) Light-beam scanning interferometry for on-line ultra precision surface measurement. In: 7th International Conference of the European Society for Precision Engineering and Nanotechnology 2007. Proceedings. Euspen, Bedford, pp. 302-305. ISBN 978-0-9553082-2-2

Xie, F., Xiao, Shaojun, Blunt, Liam and Jiang, Xiang (2007) Component-based software framework for surface topography visualization and analysis. In: The 11th International Conference on Metrology and Properties of Engineering, 17th-20th July 2007, University of Huddersfield, Huddersfield, UK.

Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2007) Exploration of a Category Theory-Based Object-Oriented Database for Surface Texture Information Management. In: Proceedings of the First International Symposium on Data, Privacy, and E-Commerce November 1-3, 2007. IEEE Computer Society, London, UK, pp. 107-109. ISBN 978-0-7695-3016-1

Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2007) Machining surface texture knowledge management using a category theory-based object-oriented database. Communications of SIWN (formerly: System and Information Sciences Notes), 1 (1). pp. 83-88. ISSN 1757-4439

Yan, W., Scott, Paul J. and Jiang, Xiang (2007) Structures of specification and verification knowledge-base in surface texture knowledge-based system. In: 10th International Conference on Computer Aided Tolerancing, 21st-23rd March, 2007, Erlangen, Germany.

Yang, Shuming and Jiang, Xiang (2007) The beam propagation method used for the design of an integrated optical coupler. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Yao, Shaowen, Barrans, Simon and Blunt, Liam (2007) Incompressible and Analytical Study on a Basic Model of Out-Pump Type Complex Journal Gas Bearings. In: The 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2007), 24-27 September 2007, Tohoku University, Sendai, Japan. (Unpublished)

Zhang, H., Brown, L. and Blunt, Liam (2007) Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacement. In: The 11th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2007), 17th-20th July 2007, University of Huddersfield, Huddersfield, UK. (Unpublished)

Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2007) Generation of fretting wear debris at the stem-cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-4.

Zhang, Hongyu, Brown, Leigh and Blunt, Liam (2007) A better understanding of the surface topography at the stem-cement interface. In: ASME/STLE International Joint Tribology Conference, 22nd-24th October 2007, San Diego, California, USA.

Zhang, X., Jiang, Xiang and Crampton, Andrew (2007) Numerical Analysis of the Boundary Effect of Radial Basis Functions in 3D Surface Reconstruction. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

2006

Abouelatta, O.B., El-Bediwi, A., Sakrana, A., Jiang, Xiang and Blunt, Liam (2006) Surface integrity of provisional resin materials. Measurement Science and Technology, 17 (3). pp. 584-591. ISSN 0957-0233

Bills, Paul J., Blunt, Liam and Jiang, Xiang (2006) A metrology solution for determination of form deviation and wear in orthopaedic joint replacements. In: 33rd Leeds-Lyon Symposium on Tribology, Tuesday 12th - Friday 15th September 2006, Trinity and all Saints College, Leeds. (Unpublished)

Blunt, Liam (2006) Metrology of MST and microfluidic devices using white light interferometery and novel surface metrology characterisation. In: Micro and Nano Technology (MNT) Measurement Club, 1-day meeting, The Measurement and Characterisation of MST Devices (MEMS), Monday 27 February 2006, National Physical Laboratory, Hampton Road, Teddington, Middlesex TW11 0LW. (Unpublished)

Blunt, Liam, Bills, Paul J., Hardaker, Cath and Pantelis, Costas (2006) The use of CMM techniques to assess the wear of total knee replacements. In: Nodtrib 2006 - The 12th Nordic Symposium on Tribology. DTU Tryk, Lyngby, Denmark, p. 61. ISBN 87-90416-17-1

Brennan, James K., Jiang, Xiang, Crampton, Andrew and Leach, Richard K. (2006) Propagation of measurement uncertainty for surface texture parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Charlton, P. and Blunt, Liam (2006) CNC manufacturing to improve hip and knee joint replacement lifetimes. In: ICMR 2006, 5th - 7th September 2006, Liverpool, UK.

Crampton, Andrew and Forbes, Alistair B. (2006) Spline approximation using knot density functions. In: Algorithms for Approximation. Springer, London, pp. 249-258. ISBN 978-3-540-33283-1

Edwards, R.S., Sophian, A., Dixon, S., Tian, Gui Yun and Jiang, Xiang (2006) Dual EMAT and PEC non-contact probe: applications to defect testing. NDT & E International, 39 (1). pp. 45-52. ISSN 0963-8695

Gao, F., Coupland, J. M. and Petzing, J. (2006) V-groove measurement with white light interferometry. In: Photon06, 4-7 September, 2006, Manchester.

Jiang, Xiang, Lin, D., Blunt, Liam, Zhang, W. and Zhang, L. (2006) Investigation of some critical aspects of on-line surface measurement by a wavelength-division-multiplexing technique. Measurement Science and Technology, 17. pp. 483-487. ISSN 0957-0233

Jiang, Xiang and Mahadevan, S. (2006) Bayesian cross-entropy methodology for optimal design of validation experiments. Measurement Science and Technology, 17. pp. 1895-1908. ISSN 0957-0233

Jiang, Xiang, Wang, Kaiwei and Martin, Haydn (2006) Near common-path optical fibre interferometer for potentially fast on-line micro/nano scale surface measurement. Optical Letters, 31. pp. 3603-3605. ISSN 0146-9592

Jiang, Xiang and Whitehouse, D.J. (2006) Miniaturized optical measurement methods for surface nanometrology. CIRP Annals - Manufacturing Technology, 55 (1). pp. 577-580. ISSN 0007-8506

Leach, Richard K., Chetwynd, D., Blunt, Liam, Haycocks, J., Harris, Peter M., Jackson, K., Oldfield, S. and Reilly, S. (2006) Recent advances in traceable nanoscale dimension and force metrology in the UK. Measurement Science and Technology, 17. pp. 467-476. ISSN 0957-0233

Martin, Haydn (2006) A self stabilising multiplexed interferometer for on-line surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Scott, Paul J. (2006) The case of surface texture parameter RSm. Measurement Science and Technology, 17 (3). pp. 559-564. ISSN 09570233

Wang, Yan, Scott, Paul J. and Jiang, Xiang (2006) Category model to modeling the surface texture knowledge-base. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-7.

Xiao, Shaojun, Xie, F., Blunt, Liam, Scott, Paul J. and Jiang, Xiang (2006) Feature extraction for structured surface based on surface networks and edge detection. Materials Science in Semiconductor Processing, 9 (1-3). pp. 210-214. ISSN 1369-8001

Yang, Shuming and Jiang, Xiang (2006) The roughness measurement of the super-smooth surface of hard disks. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-7.

Yin, C., Lin, D., Liu, Z. and Jiang, Xiang (2006) New advance in confocal microscopy. Measurement Science and Technology, 17 (3). pp. 596-600. ISSN 0957-0233

Zhang, H., Brown, L. and Blunt, Liam (2006) Investigation of characteristics at the stem cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

2005

Bills, Paul J., Brown, L., Jiang, Xiang and Blunt, Liam (2005) A metrology solution for the orthopaedic industry. Journal of Physics, Series. pp. 316-319. ISSN 1742-6596

Blunt, Liam, Armstrong, J. and Blunt, R. (2005) The use of advanced 3D surface metrology for the characterisation of epi-wafers and Si structures. Physica Status Solidi (c), 2 (4). pp. 1251-1258. ISSN 1610-1634

Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2005) Advances in micro and nano-scale surface metrology. Key Engineering Materials, 295-29. pp. 431-436. ISSN 1013-9826

Blunt, Liam, Leach, Richard K., Scott, Paul J., Harris, Peter M., Xiao, Shaojun, Li, T., Parkin, G. and Jiang, Xiang (2005) Development of “softgauges” for surface profile metrology. In: 5th Euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Blunt, Liam, Xiao, Shaojun, Jiang, Xiang and Scott, Paul J. (2005) Geometrical characterisation of MST and microfluidic devices using novel surface metrology techniques. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Approximation of surface roughness profiles and parameters. In: International Conference on Advanced Mathematical and Computational Tools in Metrology (AMCTM 2005), 27–29 June, 2005, Instituto Português da Qualidade, Caparica, Portugal. (Unpublished)

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Approximation of surface texture profiles. Journal of Physics, Series. pp. 264-267. ISSN 1742-6596

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Propagation of uncertainty in discretely sampled surface roughness profiles. Advanced mathematical and computational tools in metrology VII. pp. 271-275.

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Reconstruction of continuous surface profiles from discretely sampled data. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Charlton, P., Blunt, Liam and Beaucamp, A. (2005) Machining of "freeform" biological surfaces on an advanced 7-axis CNC polishing machine. In: International Conference on Precision Machining, ICPM 2005, 2005, Vienna, Austria. (Unpublished)

Jiang, Xiang and Whitehouse, D.J. (2005) 7th International Symposium on Measurement Technology and Intelligent Instruments. Journal of Physics, Confer. ISSN 1742-6596

Li, H., Cheung, C.F., Lee, W.B., To, S and Jiang, Xiang (2005) Characterisation of surface roughness for ultra-precision freeform surfaces. Journal of Physics: conference series, Series. pp. 32-35. ISSN 1742-6596

Li, H., Jiang, Xiang and Li, Z. (2005) Combination of M-estimation and Gaussian filtering for characterizing 3D Engineering surfaces. Key Engineering Materials, 295-29. pp. 459-464. ISSN 1013-9826

Li, Z. and Jiang, Xiang (2005) An international strategy for China's manufacturing industry and technical standards. In: International Manufacturing Leaders Forum (IMLF 2005), 28th Feb-2nd March 2005, Glenelg Beach, Adelaide, South Australia. (Unpublished)

Lin, D., Jiang, Xiang, Zhang, W., Zhang, L. and Blunt, Liam (2005) Multiplexed fibre interferometer and its application on surface measurement. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Ma, J.W., Jiang, Xiang and Scott, Paul J. (2005) Complex ridgelets for shift invariant characterizaion of surface topography with line singularities. Physics Letters A, 344. pp. 423-431. ISSN 0375-9601

Ma, L.M., Jiang, Xiang, Xu, Z. and Li, Z. (2005) An investigation on the technical standard strategy for China's manufacturing industry. Journal of Physics: conference series, 13. pp. 389-393. ISSN 1742-6596

Murphy, Ciaran C. and Blunt, Liam (2005) Surface texture of hip implants. Advanced Materials & Processes, 163 (10).

Rosen, B-G, Blunt, Liam and Thomas, T.R. (2005) On in-vivo skin topography metrology and replication techniques. Journal of Physics: conference series, 13. pp. 325-329. ISSN 1742-6596

Wang, J., Jiang, Xiang, Ma, L.M., Xu, Z. and Li, Z. (2005) Uncertainty of spatial straightness in 3D measurement. Journal of Physics, 13. pp. 220-223. ISSN 1742-6596

Wang, Kaiwei, Cai, Z.J. and Zeng, L.J. (2005) A two-dimensional surface profile imaging technique based on heterodyne interferometer. Key Engineering Materials, 295-29. pp. 477-482. ISSN 1013-9826

Wang, Kaiwei and Zeng, L. (2005) Double-grating frequency shifter for low-coherence heterodyne interferometry. Optics Communications, 251 (1-3). pp. 1-5. ISSN 0030-4018

Wang, Kaiwei and Zeng, L. (2005) Heterodyne Fourier transform spectroscopy based on double-grating frequency shifter. Review of Scientific Instruments, 76 (6). 063108. ISSN 00346748

Wang, Kaiwei and Zeng, L. (2005) Two-dimensional surface-profile imaging technique based on double-grating frequency shifter. Applied Optics, 44 (22). pp. 4625-4630. ISSN 0003-6935

Wang, Yan, Scott, Paul J. and Jiang, Xiang (2005) The structure of surface texture knowledge. Journal of Physics: conference series, 13. pp. 1-4. ISSN 1742-6596

Zeng, Wenhan and Jiang, Xiang (2005) Complex wavelet transform based surface topography analysis. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Zeng, Wenhan, Jiang, Xiang, Gao, Y. and Xie, T. (2005) Texture extraction and identification of 3D engineering surfaces. Key Engineering Materials, 295-29. pp. 453-458. ISSN 1013-9826

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2005) Complex ridgelets for the extraction of morphological features on engineering surfaces. Journal Paper of Physics: Conference Series, 13. pp. 246-249. ISSN 1742-6588

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2005) Metrological characteristics of dual-tree complex wavelet transform for surface analysis. Measurement Science and Technology, 16 (7). pp. 1410-1417. ISSN 0957-0233

Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2005) Metrological characteristics of complex wavelet transform for surface topography analysis. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Zhang, X B, Lu, H, Jiang, Xiang and Li, Z. (2005) A straightness error measurement method matched new generation GPS. Journal of Physics: conference series, 13. pp. 402-405. ISSN 1742-6596

2004

Bills, Paul J., Blunt, Liam and Hardaker, Cath (2004) The use of CMM techniques to assess the functionality of total knee replacements. In: 8th International Symposium on Measurement and Quality Control in Production. VDI Verlag GmbH, Dusseldorf, Germany, pp. 73-80. ISBN 3-18-091860-8

Blunt, Liam, Jiang, Xiang, Xiao, Shaojun and Scott, Paul J. (2004) The use of interferometry and image analysis techniques for metrology of MST devices. In: 8th International Symposium on Measurement and Quality Control in Production, 12th-15th October, 2004, Erlangen, Germany. (Unpublished)

Blunt, Liam and Thomas, T.R. (2004) Wear ranking of hard on hard bearings for prosthetic hip joints. Wear, 257. pp. 1208-1212. ISSN 0043-1648

Brennan, James K., Mason, John C., Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2004) Approximation of surface texture profiles and parameters. In: 4th International Conference of the European Society for Precision Engineering and Nanotechnology, euspen, 30th May - 3rd June 2004, Scottish Exhibition and Conference Centre (SECC), Glasgow. (Unpublished)

Howell, J.R., Blunt, Liam, Doyle, C., Hooper, R.M., Lee, A.C. and Ling, R.S.M. (2004) In Vivo surface wear mechanisms of femoral components of cemented total hip arthroplasties the influence of wear mechanism on clinical outcome. The Journal of Arthroplasty, 19 (1). pp. 88-101. ISSN 0883-5403

Jenkinson, D.P., Crampton, Andrew, Mason, John C., Cox, M.G., Forbes, Alistair B. and Boudjemae, R. (2004) Parameterised approximation estimators for mixed noise distributions. In: Advanced Mathematical & Computational Tools In Metrology Vi. Series on Advances in Mathematics for Applied Sciences, 66 . World Scientific, pp. 67-81. ISBN 978-981-238-904-6

Jiang, Xiang (2004) Recent advances in micro-manufacturing and micro-system. In: The 6th International Conference on Frontiers of Design and Manufacturing, 20th-24th June, 2004, Xi'an, China. (Unpublished)

Jiang, Xiang and Blunt, Liam (2004) Third generation wavelet for the extraction of morphological features from micro and nano scalar surfaces. Wear, 257. pp. 1235-1240. ISSN 0043-1648

Li, Huifen, Jiang, Xiang and Li, Zhu (2004) Robust estimation in Gaussian filtering for engineering surface characterization. Precision Engineering, 28 (2). pp. 186-193. ISSN 0141-6359

Lin, Dejiao, Jiang, Xiang, Xie, Fang, Zhang, Wei, Zhang, Lin and Bennion, Ian (2004) High stability multiplexed fibre interferometer and its application on absolute displacement measurement and on-line surface metrology. Optics Express, 12 (23). pp. 5729-5734. ISSN 1094-4087

Liu, X., Cheung, K., Webb, D., Fiang, X.Q., Xiao, S.J., Longstaff, Andrew P., Widiyarto, H.M. and Jiang, Xiang (2004) Improved dynamic cutting force model in peripheral milling Part 2 Experimental verification and prediction. International Journal of Advanced Manufacturing Technology, 24. pp. 794-805. ISSN 0268-3768

Ma, J.W., Jiang, Xiang and Blunt, Liam (2004) Complex wavelet transform for extraction of morphological features on surface topography. In: euspen 4th International Conference, 30th May-3rd June 2004, Glasgow. (Unpublished)

Scott, Paul J. (2004) Pattern analysis and metrology: the extraction of stable features from observable measurements. Proceedings of the Royal Society, A, 460. pp. 2845-2864. ISSN 1364-5021

Scott, Paul J. (2004) An application of surface networks in surface texture. In: Topological Data Structures for Surfaces. Wiley. ISBN 9780470851517

Wang, J.X., Ma, L.M., Jiang, Xiang, Xu, Zhijie and Li, Z. (2004) Uncertainty of flatness least-square verification. In: ISIST 2004, The Third International Symposium on Instrumentation Science and Technology, 18th-22nd August 2004, China. (Unpublished)

2003

Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2003) Advances in micro and nano-scale surface metrology. In: ISMTII 2003, The Sixth International Symposium on Measurement Technology and Intelligent Instruments, 28 November - 1 December 2003, Academic Building, Hong Kong University of Science and Technology, Kowloon, Hong Kong.

Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2003) Future developments in surface metrology. In: Advanced Techniques for Assessment Surface Topography. Kogan Page, London, pp. 339-347. ISBN 1903996112

Jiang, Xiang and Blunt, Liam (2003) Surface analysis techniques to optimise the performance of CNC machine tools. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 107-117. ISBN 9781853129902

Jiang, Xiang and Scott, Paul J. (2003) Review of surface texture work in ISO. In: 9th International Conference on Metrology and Properties of Engineering Surfaces, 10th-11th September 2003, Halmstad University, Sweden. (Unpublished)

Liu, X, Cheng, K., Webb, D., Jiang, Xiang, Xiao, Shaojun, Longstaff, Andrew P., Widiyarto, H.M., Blunt, Liam and Ford, Derek G. (2003) Experimental investigation of the machined surface waviness, vibrations and cutting forces in peripheral milling. Key Engineering Materials, Advances in Abrasive Technology VI. pp. 213-218. ISSN 1013-9826

Liu, X-W, Cheng, K., Webb, D., Longstaff, Andrew P., Widiyarto, Muhammad Helmi Nur, Jiang, Xiang, Blunt, Liam and Ford, Derek G. (2003) Prediction and compensation of machining error in ball end milling for microscale curved surface. In: EUSPEN International Topical Conference, 19 - 20 May 2003, Aachen, Germany.

Liu, X. and Gao, F. (2003) A novel multi-function tribological probe microscope for mapping surface properties. Measurement Science and Technology, 15 (1). pp. 91-102. ISSN 0957-0233

Liu, X.W., Cheng, K., Webb, D., Longstaff, Andrew P., Widiyarto, Muhammad Helmi Nur, Jiang, Xiang, Blunt, Liam and Ford, Derek G. (2003) Investigation of the cutting force coefficients in ball-end milling. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 45-54. ISBN 9781853129902

Scott, Paul J. (2003) Novel areal characterisation techniques. In: Advanced Techniques for Assessment surface topography. Kogan Page, London, pp. 43-61. ISBN 1903996112

Scott, Paul J. (2003) Recent developments in the measurement of aspheric surfaces by contact stylus instrumentation. Proceedings of SPIE, 4927. pp. 199-207. ISSN 0277-786X

Wang, Kaiwei, Zeng, L. and Yin, C. (2003) Influence of the incident wave-front on intensity distribution nondiffracting beam used in large-scale measurement. Optics Communications, 216. pp. 99-103. ISSN 0030-4018

Xie, F., Zhang, W., Jiang, Xiang, Zhang, L. and Bennion, Ian (2003) Novel spatial scanning technique for surface roughness measurement. Lasers and Electro-Optics Society, IEEELEOS, 1 (27-28). pp. 97-98.

2002

Bills, Paul J., Hardaker, Cath, Goldsmith, Andrew, Smith, Simon, Isaac, Graham and Dowson, Duncan (2002) Differential wear between femoral heads and acetabular cup inserts in metal-on-metal total replacement joints. In: Institution of Mechanical Engineers – ‘Engineers and Surgeons – Joined at the Hip’, 13-15 June 2002, London, UK. (Unpublished)

Garnaes, J., Kofod, N., Kuhle, A., Nielson, C., Dirscherl, K. and Blunt, Liam (2002) Calibration of step heights and roughness measurements with atomic force microscopes. Precision Engineering, 27 (1). pp. 91-98. ISSN 0141-6359

Jiang, Xiang, Blunt, Liam and Scott, Paul J. (2002) Fundamental research into the filtration of surface texture in geometric product specification and verification. In: 3rd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering - ICME 2002, 3rd-5th July 2002, Ischia, Italy. (Unpublished)

Liu, X., Bell, T., Gao, F. and Chetwynd, D. G. (2002) Characterisation of engineered surfaces by a multi-function tribological probe microscope. In: EUSPEN International Conference 2002. EUSPEN, pp. 719-722.

Ramasawmy, H. and Blunt, Liam (2002) 3D surface topography assessment of the effect of different electrolytes during electrochemical polishing of EDM surfaces. International Journal of Machine Tools and Manufacture, 42 (5). pp. 567-574. ISSN 0890-6955

Scott, Paul J., Jiang, Xiang and Blunt, Liam (2002) An overview of the relationship between approximation theory and filtration. In: Algorithms for approximation IV : the proceedings of the Fourth International Symposium on Algorithms for Approximation, held at the University of Huddersfield, July 2001. University of Huddersfield, Huddersfield, pp. 188-196. ISBN 1862180407

2001

Blunt, Liam and Rosen, B-G (2001) Topography instrumentation. In: Metrology and Properties of Engineering Surfaces. Springer, London, UK, pp. 83-112. ISBN 978-0-412-80640-7

Blunt, Liam and Stout, K.J. (2001) 8th International Conference on Metrology and Properties of Engineering Surfaces26–29 April 2000, University of Huddersfield, UK. International Journal of Machine Tools and Manufacture, 41 (13-14). p. 1845. ISSN 0890-6955

Burrows, J., Griffiths, B. and Scott, Paul J. (2001) The use of vectors for defining the three-dimensional texture and asymmetric directionality of turned specimens. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215 (2). pp. 125-134. ISSN 0954-4054

Jiang, Xiang and Blunt, Liam (2001) Advances in surface analysis technology. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 247-258. ISBN 9781853128905

Jiang, Xiang and Blunt, Liam (2001) Morphological assessment of orthopaedic implants using multiscalar wavelets. Wear, 250. pp. 217-221. ISSN 0043-1648

Jiang, Xiang, Blunt, Liam and Stout, K.J. (2001) Application of the lifting wavelet to rough surfaces. Precision Engineering, 25 (2). pp. 83-89. ISSN 0141-6359

Jiang, Xiang, Blunt, Liam and Stout, K.J. (2001) Lifting wavelet for three-dimensional surface analysis. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2163-2169. ISSN 0890-6955

Liu, X. and Gao, F. (2001) Multi-function evaluation of surfaces at micro/nano scales by a new tribological probe microscope. In: 2nd euspen International Conference, 27-31, May 2001, Turin, Italy.

Scott, Paul J. (2001) An algorithm to extract critical points from lattice height data. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 1889-1897. ISSN 0890-6955

Stout, K.J. and Blunt, Liam (2001) A contribution to the debate on surface classifications—random, systematic, unstructured, structured and engineered. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2039-2044. ISSN 0890-6955

Wang, Kaiwei, Blunt, Liam, Mao, L.T., Chao, C.C. and Stout, K.J. (2001) The effects of operational parameters on surface characteristics of the ballised material. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2071-2078. ISSN 0890-6955

Xiao, Shaojun, Jiang, Xiang and Blunt, Liam (2001) Multi-Scalar features extraction for the bioengineering nanoscalar surfaces on the basis of the wavelet analysis. In: Proceedings of the Fifth International Symposium on Measurement Technology and Intelligent Instruments ISMTII 2001. National Institute of Standards, pp. 153-159.

Xiao, Shaojun, Jiang, Xiang, Blunt, Liam and Scott, Paul J. (2001) Comparison study of the biorthogonal spline wavelet filtering for areal rough surfaces. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2103-2111. ISSN 08906955

2000

Gao, F. and Liu, X (2000) Development of a new multi-function tribological Microscope. In: 1st euspen Topical Conference on Fabrication and Metrology in Nanotechnology and 2nd Annual General Meeting of euspen, 31 May - 2 June, 2000, Copenhagen, Denmark.

Gao, F. and Liu, X. (2000) A multi-functional tribological probe microscope for surface and surface related properties. In: The euspen nanotechnology workshop and Joint Warwick-Tokyo Nanotechnology Symposium, Sep. 2000, Warwick, UK.

Jiang, Xiang, Blunt, Liam and Stout, K.J. (2000) Development of a lifting wavelet representation for surface characterization. Proceedings of The Royal Society A Mathematical Physical and Engineering Sciences, 456 (2001). pp. 2283-2313. ISSN 13645021

Stout, K.J. and Blunt, Liam (2000) Three dimensional surface topography. Penton, London, UK. ISBN 1857180267

Ziao, S. J., Jiang, Xiang and Blunt, Liam (2000) Three-dimensional functional parameters for characterization of the bio-engineering surface at different stages of wear. In: 1st International Conference on Tribology in Environmental Design 2000 - The Characteristics of Interacting Surfaces. Professional Engineering Publishing, London, UK, pp. 155-161. ISBN 1-86058-266-4

1998

Gao, F., Peng, G. and Koenders, L. (1998) Calibration of transfer standards for SPM. Microelectronic Engineering, 41 (42). pp. 615-618. ISSN 0167-9317

1997

Gao, F., Harms, C., Zhao, X. and Koenders, L. (1997) Calibration of Standard Using a Scanning Probe Microscope. In: European Workshop on Micro-technology and Scanning Probe Microscope, 1997, Mainz, Germany.

Gao, F., Peng, G., Zhao, X. and Koenders, L. (1997) Calibration of Standards and Application by SPM. In: The 9th International Precision Engineering Seminar, May 1997, Braunschweig, Germany. (Unpublished)

1993

Gao, F. (1993) A Reflective Optic Fiber Displacement Sensor. In: Young Scientists Symposium of National Institute of Metrology, 1993, Beijing, China.

Xu, Y., Ye, X., Xu, J., Li, C. and Gao, F. (1993) A Fabry—Perot Interferometer for Measuring Micro-Displacement. ACTA Metrologica SINCA, 14 (2). pp. 94-98. ISSN 0894-0525

1991

Gao, F. and Xu, Y. (1991) The Study of a Fold Cavity Fabry-Perot Interferometer and it’s Phase. Optoelectronic Engineering, 20 (3). pp. 18-20. ISSN 1003-501X

1990

Xu, Y., Ye, X., Xu, J., Li, C. and Gao, F. (1990) A High Precision Fold Fabry-Perot Interferometer for Measuring Displacement. In: National Geometric Metrology Symposium, 1990, Qingdao, China.

Xu, Y., Ye, X., Xu, J., Li, C. and Gao, F. (1990) A High Precision Heterodyne Laser Interferometer for Measuring Micro-displacement. ACTA Metrologica SINICA, 11 (1). pp. 32-35.

Xu, Y., Ye, X., Xu, J., Li, C. and Gao, F. (1990) A Laser Heterodyne Interferometer for Measuring Air Refractive Index. In: National Geometric Metrology Symposium, 1990, Qingdao, China.

Xu, Y., Ye, X., Xu, J., Li, C. and Gao, F. (1990) Precise Determination of 633nm He-Ne Laser Wavelength in Air. In: 12th IMEKO World Congress Measurement and Progress DIGESE, 1990, Beijing, China.

1989

Xu, Y., Ye, X., Xu, J., Li, C. and Gao, F. (1989) A Laser Heterodyne Interferometer for Measuring Nanometer Displacement. In: 2nd IMEKO TC14 International Symposium on Metrology for Quality Control in Production, 1989, Beijing, China.

1987

Gao, F., Wang, B. and Zhuang, B. (1987) A Projection Photoelectric 2D Positioning System. In: National Symposium of Opto-Electronic technology, 1987, Jilin, China.