Up a level
Export as [feed] RSS
Jump to: 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991 | 1990 | 1989 | 1985
Number of items at this level: 1345.

2022

Mallin, Levi (2022) Mechanical Design of Permanent Magnet Rotors for High-Speed Electric Machines. Doctoral thesis, University of Huddersfield.

Quashie, David (2022) Analysis of a mass production balancing method for turbochargers. Masters thesis, University of Huddersfield.

2021

Alegeh, Nurudeen Eshiemoghie (2021) Condition Monitoring of Machine Tool Ball Screw Feed Drives Through Signal Analysis and Artificial Intelligence. Doctoral thesis, University of Huddersfield.

Ali, Ahmed (2021) Axial Clamping Behaviour of V-band clamps at Ambient and High temperature. Doctoral thesis, University of Huddersfield.

Bell, Andrew (2021) Towards an integrated strategy for effective machine tool probing. Masters thesis, University of Huddersfield.

Chasti, Basit Shafi (2021) Novel Machine Tool Feed Drive Design for High Dynamic Stiffness and Ultra-Low Vibration. Masters thesis, University of Huddersfield.

Chuku, Difference (2021) A NOVEL STRUCTURAL MONITORING SYSTEM BASED ON A LOW-COST DISPLACEMENT SENSING TECHNIQUE AND IN-SITU CALIBRATION. Doctoral thesis, University of Huddersfield.

Conway, Benjamin (2021) Estimating positional thermal errors in a ballscrew feed-drive system from discrete ballscrew temperature measurements. Doctoral thesis, University of Huddersfield.

Emsley, Daniel Lewis (2021) Systems Engineering Approach to the Automated Manufacture of Static Tool-Holding. Masters thesis, University of Huddersfield.

Furness, Thomas Richard (2021) INTERNAL FEATURE MEASUREMENT UTILISING INFRARED THERMOGRAPHY. Doctoral thesis, University of Huddersfield.

Heptinstall, Thomas (2021) AN INVESTIGATIVE ANALYSIS OF BRITISH MILITARY BREECH-LOADING CAVALRY CARBINES 1841-1864. Doctoral thesis, University of Huddersfield.

Kadhim, Mohammed Abd Al Alah (2021) NUMERICAL STUDY OF TURBULENT SWIRLING FLOWS. Doctoral thesis, University of Huddersfield.

Olabode, Olaide Felix (2021) CORE TEMPERATURE MEASUREMENT USING ULTRASOUND FOR HIGH PRECISION MANUFACTURING PROCESSES. Doctoral thesis, University of Huddersfield.

Shah, Syed Badar (2021) A Finite element approach to determine the unknown location of the heat sources within engineering structures. Masters thesis, University of Huddersfield.

Tawfik, Ahmed Salah Bakr (2021) Development and optimisation of a method for assessment of porosity in additively manufactured parts using x-ray tomography. Doctoral thesis, University of Huddersfield.

Zheng, Xuming (2021) The development and application of creep damage constitutive equations for high Cr steels over a wide range of stress. Doctoral thesis, University of Huddersfield.

2020

Liu, Fulong (2020) Online Identification of Vehicle Dynamic Systems for Condition Monitoring. Doctoral thesis, University of Huddersfield.

Saad, Syed Mohammad (2020) Experimental and Numerical Investigations on the Transient Performance of a Turbocharged Diesel Engine. Doctoral thesis, University of Huddersfield.

Smithurst, Peter G. (2020) The Development, Technology and Application of Mechanised Manufacture to the Enfield Pattern 1853 Rifle and the Achievement of Interchangeability. Doctoral thesis, University of Huddersfield.

Tang, Xiaoli (2020) Investigation of Data Compression Methods for Intelligent Machine Condition Monitoring. Doctoral thesis, University of Huddersfield.

Xu, Yuandong (2020) Machine Condition Diagnostics Based on Enhanced System Identification Technologies. Doctoral thesis, University of Huddersfield.

2019

Airede, Yusuf Okahamame (2019) Intrusive and Non-intrusive Methods for Fluid Diagnostics and Flow Condition Monitoring in a Control valve. Doctoral thesis, University of Huddersfield.

Binder, Jonathan (2019) Investigation of Additive Manufacturing in New Medical Product Development for Chemotherapy-Induced Alopecia. Masters thesis, University of Huddersfield.

Chirvase, Cezarina Isabela (2019) Clinical feasibility of in-room proton radiography using single detector. Doctoral thesis, University of Huddersfield.

Haba, Usama A. M. (2019) Information Extraction Based on the Analysis of Motor Supply and Structural Vibration for Machinery Condition Monitoring. Doctoral thesis, University of Huddersfield.

Latif, Raja (2019) An Investigation into The Development of an Electrically Assisted Turbocharger with Energy Recovery. Masters thesis, University of Huddersfield.

Mavromihales, Michael (2019) Enhancing Teaching-Learning Effectiveness in Mechanical Engineering Education Through Structured Interventions and Action Learning. Doctoral thesis, University of Huddersfield.

Mondal, Debanjan, Gu, Fengshou and Ball, Andrew (2019) Application of Minimum Entropy Deconvolution in Diagnosis of Reciprocating Compressor Faults Based on Airborne Acoustic Analysis. In: 16th International Conference on Condition Monitoring and Asset Management (CM 2019), 25-27 June 2019, Glasgow, UK.

Olabode, OIaide Felix, Fletcher, Simon, Longstaff, Andrew P. and Mian, Naeem S. (2019) Precision Core Temperature Measurement of Metals Using an Ultrasonic Phase-Shift Method. Journal of Manufacturing and Materials Processing, 3 (3). pp. 1-12. ISSN 2504-4494

Olabode, Olaide Felix, Fletcher, Simon, Longstaff, Andrew P. and Mian, Naeem S. (2019) Core Temperature Measurement in Subtractive Manufacturing Processes. In: Laser Metrology and Machine Performance (LAMDAMAP) 2019", 13th March-14th March, 2019, AMRC, Sheffield, UK.

Shah, Paras (2019) Optimisation and application of non-destructive metrology techniques to improve the quality, accuracy, and traceability of additively manufactured components. Doctoral thesis, University of Huddersfield.

Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.

Tabriz, Md Shams E (2019) The Effect of Machining Marks on the Stress Distribution and Fatigue Durability of Turbocharger Compressor Wheels. Doctoral thesis, University of Huddersfield.

Tu, Jiada (2019) Three-Dimensional Finite Element Analysis of Creep Evolution and Damage at Grain Boundary Level. Doctoral thesis, University of Huddersfield.

Zala, Karina (2019) FLOW CHARACTERISTICS AND DESIGN METHODOLOGY FOR A CENTRIFUGAL COMPRESSOR VOLUTE. Doctoral thesis, University of Huddersfield.

2018

Akowua, Kwame D.B (2018) Integration of On-Machine Surface Metrology and Machining Process Prediction. Doctoral thesis, University of Huddersfield.

Albarzenji, Dlir (2018) Design, Development and Application of a Novel Seven-Sensor Probe System for the Measurement of Dispersed Phase Flow Properties in Multiphase Flows. Doctoral thesis, University of Huddersfield.

Asim, Taimoor, Algadhi, Abdulamagid and Mishra, Rakesh (2018) Effect of Capsule Shape on Hydrodynamic Characteristics and Optimal Design of Hydraulic Capsule Pipelines. Journal of Petroleum Science and Engineering, 161. pp. 390-408. ISSN 0920-4105

Dales, Mark (2018) Wind Turbine Emulation Based on the Accurate Control of Servomotors. Doctoral thesis, University of Huddersfield.

Elarrami, Ablgasem M. (2018) Experimental and Numerical Based Analysis of Performance Characterisation of Roots Blower. Doctoral thesis, University of Huddersfield.

Hamood, Ahmed, Jaworski, Artur, Mao, Xiaoan and Simpson, Kevin (2018) Design and construction of a two-stage thermoacoustic electricity generator with push-pull linear alternator. Energy, 144. pp. 61-72. ISSN 0360-5442

Hamza, Esam (2018) Analysis of Friction Stir Welding Using Tools with Different Pin Profiles. Doctoral thesis, University of Huddersfield.

Jackson, Frankie. F (2018) Aerodynamic optimisation of Formula student vehicle using computational fluid dynamics. Fields: journal of Huddersfield student research, 4 (1). ISSN 2057-0163

Lee, Samuel Peter, Rezk, Ahmed, Jupp, Martyn and Nickson, Keith (2018) The influence of pulse shape on the performance of a mixed flow turbine for turbocharger applications. International Journal of Mechanical Engineering and Robotics Research, 7 (2). ISSN 2278-0149

Li, Xiaoxu, Jaworski, Artur and Mao, Xiaoan (2018) Bubble size and bubble rise velocity estimation by means of electrical capacitance tomography within gas-solids fluidized beds. Measurement, 117. pp. 226-240. ISSN 0263-2241

Madamedon, Misan (2018) The Characteristics of Instantaneous Angular Speed of Diesel Engines for Fault Diagnosis. Doctoral thesis, University of Huddersfield.

Mondal, Debanjan, Sun, Xiuquan, Gu, Fengshou and Ball, Andrew (2018) A Study of Diagnosing Reciprocating Compressor Faults using EMD-entropy of the Airborne Acoustic Signals. In: Proceedings of 3rd International Conference on Maintenance Engineering. ShieldCrest Publishing, Coimbra, Portugal, pp. 293-307. ISBN 978-989-8200-17-4

Mones, Zainab (2018) INVESTIGATION OF DYNAMIC RESPONSES OF ON-ROTOR WIRELESS SENSORS FOR CONDITION MONITORING OF ROTATING MACHINES. Doctoral thesis, University of Huddersfield.

Shagluf, Abubaker, Parkinson, Simon, Longstaff, Andrew P. and Fletcher, Simon (2018) Adaptive decision support for suggesting a machine tool maintenance strategy: from reactive to preventative. Journal of Quality in Maintenance Engineering, 24 (3). pp. 376-399. ISSN 1355-2511

Tabriz, Md Shams E. and Barrans, Simon (2018) Effect of cusp size, depth and direction on stress concentration. International Journal of Materials, Mechanics and Manufacturing, 6 (2). pp. 88-93. ISSN 1793-8198

Tian, Xiange, Xi Gu, James, Rehab, Ibrahim, Abdalla, Gaballa M., Gu, Fengshou and Ball, Andrew (2018) A robust detector for rolling element bearing condition monitoring based on the modulation signal bispectrum and its performance evaluation against the Kurtogram. Mechanical Systems and Signal Processing, 100. pp. 167-187. ISSN 0888-3270

Young, Christian (2018) Ultra-precision Abrasive Machining of Functional Structured Surfaces. Doctoral thesis, University of Huddersfield.

Zhang, Po, Lu, Wenlong, Liu, Xiaojun, Zhai, Wenzheng, Zhou, Mingzhuo and Zeng, Wenhan (2018) Torsional fretting and torsional sliding wear behaviors of CuNiAl against 42CrMo4 under dry condition. Tribology International, 118. pp. 11-19. ISSN 0301-679X

Zhou, Hongliang, Ji, Tao, Wang, Ruichen, Ge, Xiaocheng, Tang, Xiaoyu and Tang, Shizhen (2018) Multipath ultrasonic gas flow-meter based on multiple reference waves. Ultrasonics, 82. pp. 145-152. ISSN 0041-624X

2017

Abdalla, Gaballa M. A. (2017) Planetary gearbox condition monitoring based on modulation analysis. Doctoral thesis, University of Huddersfield.

Abdulshahed, Ali, Longstaff, Andrew P. and Fletcher, Simon (2017) A cuckoo search optimisation-based Grey prediction model for thermal error compensation on CNC machine tools. Grey Systems: Theory and Application, 7 (2). pp. 146-155. ISSN 2043-9377

Abdulwahab, Abubaker and Mishra, Rakesh (2017) Condition Monitoring of High-Sided Tractor-Trailer Units under Gusty Crosswind Conditions. In: COMADEM 2017, 10-13 July 2017, University of Central Lancaster, UK. (Unpublished)

Abdulwahab, Abubaker and Mishra, Rakesh (2017) Estimation of LTR rollover index for a high-sided tractor semitrailer vehicle under extreme crosswind conditions through dynamic simulation. In: 23rd International Conference on Automation and Computing (ICAC 2017). IEEE. ISBN 978-0-7017-0260-1

Akowua, Kwame D.B, Fletcher, Simon, Longstaff, Andrew P. and Mian, Naeem S. (2017) Areal surface measurement using multidirectional laser line scanning. In: Laser Metrology and Machine Performance XII, Lamdamap 2017. euspen, Renishaw Innovation Centre, Wotton-under-Edge, UK, pp. 175-182. ISBN 978-0956679093

Al-Ani, Mahir, Barrans, Simon and Carter, J. (2017) Electromagnetic and Mechanical Analysis of High Speed SPM Rotor with Copper Shield. 2017 IEEE International Electric Machines & Drives Conference (IEMDC).

Al-Ani, Mahir, Barrans, Simon and Carter, J. (2017) Rotor loss reduction using segmented inverter in surface-mounted permanent magnet drive. Proceedings of the 2017 IEEE International Electric Machines and Drives Conference (IEMDC) 2017.

Al-Ani, Mahir, Lee, Samuel Peter and Allport, John (2017) Integrated electrical machine-turbo machinery. In: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. ASME. ISBN 9780791850831

Albarzenji, Dlir and Mishra, Rakesh (2017) A Novel Technique to Reduce Measurement Errors due to Flow–Sensor Interactions in Multi-‎Sensor Conductivity Probes. In: COMADEM 2017, 10-13 July 2017, University of Central Lancaster, UK. (Unpublished)

Ali, Ahmed and Barrans, Simon (2017) Empirical Method for Determining Axial Load Distribution in Joints Formed by V-Band Clamps. In: 8th International Conference on Mechanical and Aerospace Engineering - ICMAE 2017. IEEE, pp. 11-15. ISBN 978-1-5386-3306-9

Allport, John and Whelan, Chris (2017) Active charge air cooling. In: VTMS 13: Vehicle Thermal Management Systems Conference, 17-18 May 2017, London, UK. (Unpublished)

Alzarok, Hamza, Fletcher, Simon and Longstaff, Andrew P. (2017) 3D Visual Tracking of an Articulated Robot in Precision Automated Tasks. Sensors, 17 (1). ISSN 1424-8220

Andrade, António Ramos and Stow, Julian (2017) Assessing the efficiency of maintenance operators: a case study of turning railway wheelsets on an under-floor wheel lathe. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 231 (2). pp. 155-163. ISSN 1748-006X

Andrade, António Ramos and Stow, Julian (2017) Assessing the potential cost savings of introducing the maintenance option of ‘Economic Tyre Turning’ in Great Britain railway wheelsets. Reliability Engineering & System Safety, 168. pp. 317-325. ISSN 0951-8320

Asim, Taimoor, Charlton, Matthew and Mishra, Rakesh (2017) CFD based Investigations for the Design of Severe Service Control Valves used in Energy Systems. Energy Conversion and Management, 153. pp. 288-303. ISSN 0196-8904

Asim, Taimoor and Mishra, Rakesh (2017) Large Eddy Simulation based Analysis of Complex Flow Structures within the Volute of a Vaneless Centrifugal Pump. Sadhana. ISSN 0256-2499

Barrans, Simon, Alani, Mahir and Carter, Jeff (2017) Mechanical design of rotors for permanent magnet high speed electric motors for turbocharger applications. IET Electrical Systems in Transportation. ISSN 2042-9738

Barrans, Simon, Tabriz, Md Shams E and Ellis, Christian (2017) Determining stress in turbocharger impellers due to component machining. In: ASME Turbo Expo: Turbomachinery Technical Conference & Exposition, 26-30 June 2017, Charlotte, North Carolina, USA.

Bills, Paul J., Racasan, Radu, Bhattacharya, Saugatta, Blunt, Liam and Isaac, Graham (2017) Comparative study of material loss at the taper interface in retrieved metal-on-polyethylene and metal-on-metal femoral components from a single manufacturer. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 231 (8). pp. 683-690. ISSN 0954-4119

Carra, F, Bertarelli, A, Berthome, E, Fichera, C, Furness, Thomas, Guinchard, M, Mettler, L K, Portelli, M, Redaelli, S and Sacristan De Frutos, O (2017) The "Multimat" experiment at CERN HiRadMat facility: advanced testing of novel materials and instrumentation for HL-LHC collimators. Journal of Physics: Conference Series, 874. ISSN 1742-6596

Cerquiglini, Arianna, Henckel, Johann, Hothi, Harry, Rotigliano, Niccolo, Holland, Matthew, Bills, Paul J., Racasan, Radu, Skinner, John, Hirschmann, A and Hart, A. J. (2017) Understanding Why Knee Implants Fail. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 14-18 2017, San Diego, CA, USA. (Unpublished)

Chen, Lei, Liu, Gang, Zhang, Guozhong, Tang, Yuannan and Chai, John (2017) Asymptotic Analyses of the Start-Up Stage of Couette Flow Subjected to Different Boundary Conditions. International Communications in Heat and Mass Transfer, 88. pp. 177-182. ISSN 0735-1933

Feng, Guojin, Zhao, H., Gu, Fengshou, Needham, Paul M. and Ball, Andrew (2017) Efficient implementation of envelope analysis on resources limited wireless sensor nodes for accurate bearing fault diagnosis. Measurement, 110. pp. 307-318. ISSN 0263-2241

Grossoni, Ilaria, Shackleton, Philip, Bezin, Yann and Jaiswal, Jay (2017) Longitudinal rail weld geometry control and assessment criteria. Engineering Failure Analysis, 80. pp. 352-367. ISSN 1350-6307

Guan, Q, Yap, Y. F., Goharzadeh, A., Chai, John, Vargas, F. M., Chapman, W and Zhang, M. (2017) Integrated One-Dimensional Modeling of Asphaltene Deposition in Wellbores/Pipelines. In: Seventh International Conference on Modeling, Simulation and Applied Optimization, April 4th-6th 2017, UAE. (Submitted)

Hassan, Mothana A., Martin, Haydn and Jiang, Xiangqian (2017) Development of a spatially dispersed short-coherence interferometry sensor using diffraction grating orders. Applied Optics, 56 (22). pp. 6391-6397. ISSN 1559-128X

Hothi, Harry, Panagiotopoulos, Andreas, Whittaker, Robert, Bills, Paul J., McMillan, Rebecca, Skinner, John and Hart, A. J. (2017) Damage patterns at the head-stem taper junction helps understand the mechanisms of material loss. Journal of Arthroplasty, 32 (1). pp. 291-295. ISSN 0883-5403

Ibrahim, S M, Bills, Paul J. and Allport, John (2017) Improving the Capacity of Institutions to strengthen the Management of National Oil and Gas Resources. In: 224th International Academic Conference on Engineering, Technology and Innovations (IACETI), 23-24 August 2017, Mecca, Saudi Arabia.

Ibrahim, S. M., Bills, Paul J. and Allport, John (2017) Metrology education impediment in developing countries considering the case of Nigeria. In: The Canada International Conference on Education (CICE 2017), 26-29 June 2017, University of Toronto Mississauga, Canada. (Unpublished)

Ibrahim, S. M., Bills, Paul J., Allport, John and Racasan, Radu (2017) The Impediments to Nigeria Understanding Oil Production Volumes, Losses and Potential Solutions. International Journal of African and Asian Studies, 36. pp. 36-44. ISSN 2409-6938

Kapadia, Darshil, Racasan, Radu, Pagani, Luca, Al-Hajjar, Mazen and Bills, Paul J. (2017) Method for volumetric assessment of edge-wear in ceramic-on-ceramic acetabular liners. Wear, 376-77 (Part A). pp. 236-242. ISSN 0043-1648

Lazinni, Gianmarco, Romoli, Luca, Blunt, Liam and Gemini, Laura (2017) Design and characterization of textured surfaces for applications in the food industry. Surface Topography: Metrology and Properties, 5. ISSN 2051-672X

Lee, Samuel Peter, Jupp, Martyn, Nickson, Keith and Allport, John (2017) Analysis of a tilted turbine housing volute design under pulsating inlet conditions. In: ASME Turbo Expo: Turbomachinery Technical Conference & Exposition, 26-30 June 2017, Charlotte, North Carolina, USA.

Leung, Isaac Pak Hung, Fleming, Leigh, Walton, Karl, Barrans, Simon and Ousey, Karen (2017) Development of a model to demonstrate the effects of friction and pressure on skin in relation to pressure ulcer formation. Wear, 376/77 (A). pp. 266-271. ISSN 0043-1648

Li, Duo (2017) The Challenges in Dimensional Metrology and Machine Tool Metrology. In: The 3rd International Society for NanoManufacturing (ISNM) Summer School, 10-15 July 2017, Tianjin. (Unpublished)

Li, Duo and Jiang, Xiang (2017) A selective kinematics error model for on-machine measurement compensation. In: University of Huddersfield PGR Conference, 17 Nov 2017, University of Huddersfield. (Unpublished)

Li, Guoxing, Gu, Fengshou, Wang, Tie, Yang, Tiantian and Ball, Andrew (2017) Investigation into the dynamic response of cylinder liners in an IC engine based on a validated finite-element model. Systems Science & Control Engineering, 5 (1). pp. 56-69. ISSN 2164-2583

Li, H.Y., Yap, Y. F., Lou, J., Chai, John and Zhang, S. (2017) Conjugate Heat Transfer in Stratified Two-Fluid Flows with a Growing Deposit Layer. Applied Thermal Engineering, 113. pp. 215-228. ISSN 1359-4311

Li, Xuan, Yap, Y. F., Goharzadeh, A., Chai, John and Zhang, M. (2017) Modeling of Two-Phase Flow with Deposition in Vertical Pipes. In: Seventh International Conference on Modeling, Simulation, and Applied Optimization - 2017 (ICMSAO'17), 4 - 6 April 2017, UAE. (Submitted)

Lou, Shan, Brown, Stephen, Sun, Wenjuan, Zeng, Wenhan, Abdul-Rahman, Hussein S., Jiang, Xiang and Scott, Paul J. (2017) Use of Morphological Method to Investigate the Influence of Surface Texture on Dimensional Measurement of Additively Manufactured Parts. In: Special Interest Group Meeting: Additive Manufacturing, 10–11 October 2017, Katholieke Universiteit Leuven (KU Leuven), BE.

Lou, Shan, Zeng, Wenhan, Abdul-Rahman, Hussein S., Jiang, Xiangqian and Scott, Paul J. (2017) A Novel Surface Characterisation Strategy for the X-ray Computed Tomography Measurement of Complex Additively Manufactured Parts. In: Dimensional X-ray Computed Tomography Conference, 13 July 2017, University of Warwick, UK. (Unpublished)

Lou, Shan, Zeng, Wenhan, Pagani, Luca, Abdul-Rahman, Hussein S., Jiang, Xiang and Paul, Scott (2017) Development of Surface Characterisation Toolbox for Additive Manufactured Components: from Planar Layer Surfaces to Complex Functional Surfaces. In: EUSPEN Special Interest Group Meeting: Additive Manufacturing, 10–11 October 2017, Katholieke Universiteit Leuven (KU Leuven), BE.

Lu, Wenlong, Zhang, Po, Liu, Xiaojun, Zhai, Wenzheng, Zhou, Mingzhuo, Luo, Jian, Zeng, Wenhan and Jiang, Xiang (2017) Influence of surface topography on torsional fretting wear under flat-on-flat contact. Tribology International, 109. pp. 367-372. ISSN 0301-679X

Meng, Yiqing and Lucas, Gary (2017) Imaging water velocity and volume fraction distributions in water continuous multiphase flows using inductive flow tomography and electrical resistance tomography. Measurement Science and Technology, 28 (5). ISSN 0957-0233

Ogbulafor, Ugonnaya E., Feng, Guojin, Mones, Zainab, Gu, Fengshou and Ball, Andrew (2017) Application of Wavelet Packet Transform and Envelope Analysis to Non-stationary Vibration Signals For Fault Diagnosis of a Reciprocating Compressor. In: First World Congress on Condition Monitoring - WCCM 2017, 13th-16th June 2017, ILEC Conference Centre, London. (Unpublished)

Pagani, Luca, Qi, Qunfen, Jiang, Xiangqian and Scott, Paul J. (2017) Towards a new definition of areal surface texture parameters on freeform surface. Measurement, 109. pp. 281-291. ISSN 0263-2241

Papananias, Moschos, Fletcher, Simon, Longstaff, Andrew P. and Forbes, Alistair Barrie (2017) Uncertainty evaluation associated with versatile automated gauging influenced by process variations through design of experiments approach. Precision Engineering, 49. pp. 440-455. ISSN 0141-6359

Papananias, Moschos, Fletcher, Simon, Longstaff, Andrew P., Mengot, Azibananye, Jonas, Kevyn and Forbes, Alistair B. (2017) Evaluation of automated flexible gauge performance using experimental designs. In: Laser Metrology and Machine Performance XII, Lamdamap 2017. euspen, Renishaw Innovation Centre, Wotton-under-Edge, UK, pp. 45-54. ISBN 9780956679093

Papananias, Moschos, Fletcher, Simon, Longstaff, Andrew P., Mengot, Azibananye, Jonas, Kevyn and Forbes, Alistair B. (2017) Modelling uncertainty associated with comparative coordinate measurement through analysis of variance techniques. In: Proceedings of the 17th International Conference & Exhibition. euspen, Hannover, Germany, pp. 407-408. ISBN 978-0995775107

Saad, Syed and Mishra, Rakesh (2017) Simulation based study on improving the transient response quality of turbocharged diesel engines. Journal of Quality in Maintenance Engineering, 23 (3). pp. 297-309. ISSN 1355-2511

Sarmiento-Carnevali, M.L., Bemment, S.D., Harrison, T.J., Ward, C.P., Bezin, Yann, Neves, Sérgio, Kostovasilis, Dimitrios and Sichani, Matin Sh. (2017) Repoint track switch wheel-rail mechanical interface analysis. In: 25th International Symposium on Dynamics of Vehicles on Roads and Tracks, 14-18 August 2017, Central Queensland University, Rockhampton.

Sendanayake, Isuru, Asim, Taimoor and Mishra, Rakesh (2017) Development of Novel Vehicle Design Modelling Functions for Quantifying Vehicles’ Shapes. International Journal of Research, Science, Technology & Management, 7 (2). pp. 26-31. ISSN 2455-2240

Sendanayake, Isuru, Asim, Taimoor and Mishra, Rakesh (2017) Development of novel vehicle design modelling functions for quantifying vehicles’ shapes. In: International Conference on Mechanical, Energy & Power Systems, ICMEPS-2017, 20-21 January 2017, Bhopal, India. (Unpublished)

Shaeboub, Abdulkarim, Gu, Fengshou, Lane, Mark, Haba, Usama, Wu, Zhifei and Ball, Andrew (2017) Modulation signal bispectrum analysis of electric signals for the detection and diagnosis of compound faults in induction motors with sensorless drives. Systems Science & Control Engineering, 5 (1). pp. 252-267. ISSN 2164-2583

Shah, Paras, Campbell, Grant M. and Bills, Paul J. (2017) Comparison of Industrial Aerated Structures Using X-Ray Computed Tomography. In: 7th Conference on Industrial Computed Tomography (iCT 2017), February 7 - 9, 2017, Leuven, Belgium. (Unpublished)

Sharma, Sidharath, Jupp, Martyn, Barrans, Simon and Nickson, Keith (2017) The impact of housing features relative location on a turbocharger compressor flow. International Journal of Mechanical Engineering and Robotics Research, 6 (6). pp. 451-457. ISSN 2278-0149

Sharma, Sidharath, Jupp, Martyn, Nickson, Ambrose and Allport, John (2017) Ported shroud flow processes and their effect on turbocharger compressor operation. In: ASME Turbo Expo: Turbomachinery Technical Conference & Exposition, 26-30 June 2017, Charlotte, North Carolina, USA.

Shih, Jou-Yi, Kostovasilis, Dimitrios, Bezin, Yann and Thompson, D.J. (2017) Modelling options for ballast track dynamics. In: 24th international congress on sound and vibration, 23-27th July 2017, London. (Unpublished)

Stetsyuk, V., Kubiak, Krzysztof, Liu, Lande and Chai, John (2017) An alternative approach to evaluate the average Nusselt number for mixed boundary layer conditions in parallel flow over an isothermal flat plate. International Journal of Mechanical Engineering Education. ISSN 0306-4190

Stow, Julian, Cooney, Neil, Goodall, Roger M. and Sellick, Rebeka (2017) The use of wheelmotors to provide active steering and guidance for a light rail vehicle. In: The Stephenson Conference: Research for Railways, 25th-27th April 2017, London, UK. (Unpublished)

Sun, Huanwu, Wang, Juan, Longstaff, Andrew P. and Gu, Fengshou (2017) Characterizing acoustic emission signals for the online monitoring of a fluid magnetic abrasives finishing process. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN 0954-4062

Swinton, James, Eshaafi, Taher, Asim, Taimoor, Irons, John and Mishra, Rakesh (2017) Effect of Manufacturing Method of a Centrifugal Fan Hub on its Heat Dissipation Characteristics. In: COMADEM 2017, 10-13 July 2017, University of Central Lancaster, UK. (Unpublished)

Tabriz, Md Shams E, Barrans, Simon and Bills, Paul J. (2017) Effect of machining parameters on surface roughness in Al 2618 alloy subject to multi-axis machining process using ball nose cutting tools. In: ICMAE 2017: 8th International Conference on Mechanical and Aerospace Engineering, 22-25 July 2017, Prague, Czech Republic.

Tahera, Khadija, Earl, Chris F. and Eckert, Claudia (2017) A method for improving overlapping of testing and design. IEEE Transactions on Engineering Management, 64 (2). pp. 179-192. ISSN 0018-9391

Tawfik, Ahmed, Racasan, Radu, Bills, Paul J. and Blunt, Liam (2017) Detection of unmelted powder in additive manufactured components using computer tomography. In: Dimensional X-ray Computed Tomography Conference, 13 July 2017, University of Warwick, UK. (Unpublished)

Tawfik, Ahmed, Racasan, Radu, Blunt, Liam and Bills, Paul J. (2017) Characterization of defects/porosity in additive manufactured components using computer tomography. In: Joint Special Interest Group meeting between euspen and ASPE Dimensional Accuracy and Surface Finish in Additive Manufacturing,, 10-11th October 2017, Leurven, Belgium. (Unpublished)

Tian, Xiange (2017) Enhanced information extraction from noisy vibration data for machinery fault detection and diagnosis. Doctoral thesis, University of Huddersfield.

Tong, Zhen, Jiang, Xiang, Bai, Qingshun and Blunt, Liam (2017) Atomistic investigation of FIB-induced damage in diamond cutting tools under various ion irradiation conditions. In: 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, 29 May - 2 June 2017, Hannover. (Unpublished)

Townsend, Andrew, Pagani, Luca, Scott, Paul J. and Blunt, Liam (2017) Areal surface texture data extraction from x-ray computed tomography reconstructions of metal additively manufactured parts. Precision Engineering, 48. pp. 254-264. ISSN 0141-6359

Townsend, Andrew, Racasan, Radu, Bills, Paul J. and Blunt, Liam (2017) Development of an interlaboratory comparison investigating the generation or areal surface texture per ISO 25178 from XCT. In: 7th Conference on Industrial Computed Tomography (iCT 2017), February 7 - 9, 2017, Leuven, Belgium.

Turner, Daniel (2017) Investigating the Optimization of the Grinding Process through Software Automation and Thermal Modelling. Masters thesis, University of Huddersfield.

Wang, Jian, Pagani, Luca, Leach, Richard K., Zeng, Wenhan, Colosimo, Bianca M. and Zhou, Liping (2017) Study of weighted fusion methods for the measurement of surface geometry. Precision Engineering, 47. pp. 111-121. ISSN 0141-6359

Wang, Ruichen, Crosbee, David, Iwnicki, Simon, Zhao, Yunshi and Bevan, Adam (2017) Power regeneration in the primary suspension of a railway vehicle. In: First International Conference on Rail Transportation, 10-12th July 2017, Chengdu, China. (Unpublished)

Wang, Yanzhong, Tang, Wen, Chen, Yanyan, Wang, Tie, Li, Guoxing and Ball, Andrew (2017) Investigation into the meshing friction heat generation and transient thermal characteristics of spiral bevel gears. Applied Thermal Engineering, 119. pp. 245-253. ISSN 1359-4311

Wojciechowski, L., Kubiak, Krzysztof and Mathia, T.G. (2017) Impact of morphological furrows as lubricant reservoir on creation of oleophilic and oleophobic behaviour of metallic surfaces in scuffing. Tribology International, 116. pp. 320-328. ISSN 0301-679X

Wojciechowski, S., Maruda, R.W., Barrans, Simon, Nieslony, P. and Krolczyk, G.M. (2017) Optimisation of machining parameters during ball end milling of hardened steel with various surface inclinations. Measurement, 111. pp. 18-28. ISSN 0263-2241

Wu, Xin, Yu, Yingjie, Zeng, Wenhan, Qi, Te, Chen, Mingyi and Jiang, Xiangqian (2017) Non-overlap subaperture interferometric testing for large optics. Optics Communications, 396. pp. 191-198. ISSN 0030-4018

Xu, Yongjia, Gao, Feng, Ren, Hongyu, Zhang, Zonghua and Jiang, Xiangqian (2017) An iterative distortion compensation algorithm for camera calibration based on phase target. Sensors, 17 (6). p. 1188. ISSN 1424-8220

Zeng, Wenhan, Lou, Shan, Abdul-Rahman, Hussein S., Jiang, Xiang and Scott, Paul J. (2017) Simultaneous Multi-type Feature Separation for Complex Structured Surface Analysis. In: Lamdamap 12th International Conference & Exhibition, 15-16th March 2017, Renishaw Innovation Centre, UK. (Unpublished)

Zeng, Wenhan, Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2017) A new framework for Charactersation of Complex Structured Surface. In: Met & Props 2017, 27th-29th June 2017, Gothenburg, Sweeden. (In Press)

Zhang, Po, Lu, Wenlong, Liu, Xiaojun, Zhou, Mingzhuo, Zhai, Wenzheng, Zhang, Gengpei, Zeng, Wenhan and Jiang, Xiangqian (2017) Torsional fretting wear behavior of CuNiAl against 42CrMo4 under flat on flat contact. Wear, 380-38. pp. 6-14. ISSN 0043-1648

Zhang, Ruiliang, Gu, Fengshou, Mansaf, Haram, Wang, Tie and Ball, Andrew D. (2017) Gear wear monitoring by modulation signal bispectrum based on motor current signal analysis. Mechanical Systems and Signal Processing, 94. pp. 202-213. ISSN 08883270

Zhang, Ruiliang, Gu, Xi, Gu, Fengshou, Wang, Tie and Ball, Andrew (2017) Gear wear process monitoring using a sideband estimator based on modulation signal bispectrum. Applied Sciences, 7 (3). p. 274. ISSN 2076-3417

Zhou, Hongliang, Zhou, Hanhua, Zhang, Hongjian, Ge, Xiaocheng, Zhao, Yanjie and Lin, Weibin (2017) Pressure measurement based on multi-waves fusion algorithm. IET Science, Measurement & Technology, 11 (3). pp. 354-362. ISSN 1751-8830

Zhuang, Y., Goharzadeh, A., Lin, Y. J., Yap, Y. F., Chai, John, Mathew, N., Vargas, F. and Biswal, Sibani L. (2017) Experimental study of asphaltene deposition in transparent microchannels using light absorption method. Journal of Dispersion Science and Technology. ISSN 0193-2691

van Vuuren, Pieter A., Xu, Yuandong, Gu, Fengshou and Ball, Andrew (2017) Monitoring gearbox oil viscosity by means of motor current signal analysis. In: First World Congress on Condition Monitoring - WCCM 2017, 13th-16th June 2017, ILEC Conference Centre, London. (Unpublished)

2016

Abdul-Rahman, Hussein S., Lou, Shan, Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2016) Freeform texture representation and characterisation based on triangular mesh projection techniques. Measurement, 92. pp. 172-182. ISSN 0263-2241

Abdulshahed, Ali M., Longstaff, Andrew P., Fletcher, Simon and Potdar, Akshay (2016) Thermal error modelling of a gantry-type 5-axis machine tool using a Grey Neural Network Model. Journal of Manufacturing Systems, 41. pp. 130-142. ISSN 02786125

Aboufares, Ghada, Zala, Karina, Mishra, Rakesh and Asim, Taimoor (2016) Effects of Sand Particle Size on the Performance Characteristics of a Vertical Axis Wind Turbine. In: 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, December 15-17, 2016, MNNITA, Allahabad, U.P., India. (Unpublished)

Abuaniza, Ayman, Fletcher, Simon, Mian, Naeem S. and Longstaff, Andrew P. (2016) Thermal Error Modelling of a CNC Machine Tool Feed Drive System using FEA Method. International Journal of Engineering Research & Technology, 5 (3). pp. 118-126. ISSN 2278-0181

Aburass, Ali (2016) Diagnostics of fuel injection systems in a CI engine fuelled with biodiesel based on vibration responses. Doctoral thesis, University of Huddersfield.

Al-Ani, Mahir (2016) Integrated electrical machine-compressor. In: Turbo Expo: Turbomachinery Technical Conference & Exposition, June 26 - 30, 2017, Charlotte Convention Center, Charlotte, NC USA. (Submitted)

Al-Hamad, Salah, Kollar, Laszlo, Asim, Taimoor and Mishra, Rakesh (2016) Development of an Integrated Connectedness Model to evaluate the effectiveness of Teaching and Learning. In: 15th IFIP Conference on e-Business, e-Services and e-Society, 13th – 15th September 2016, Swansea University Bay Campus, Wales, UK.

Al-Wandi, Sinan, Pan, Wencheng, Ding, Songlin and P.T. Mo, John (2016) Meso-scale Modeling of the Drilling of Carbon Fibre Reinforced Plastic: Geometry and Numerical Analysis. Universal Journal of Mechanical Engineering, 4 (4). pp. 75-82. ISSN 2332-3353

Alberts, L. R., Martinez-Nogues, V., Cook, R. B., Maul, C., Bills, Paul J., Racasan, Radu, Stolz, M. and Wood, R. J. K. (2016) Comparison of Simulator Wear Measured by Gravimetric vs Optical Surface Methods for Two Million Cycles. In: Orthopaedic Research Society Annual Meeting, 5th - 8th March 2016, Orlando, Florida, USA. (Unpublished)

Altwieb, Miftah Omar and Mishra, Rakesh (2016) Experimental and Numerical Investigations on the Response of a Multi Tubes and Fins Heat Exchanger under Steady State Operating Conditions. In: 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, December 15-17, 2016, MNNITA, Allahabad, U.P., India. (Unpublished)

Alzarok, Hamza, Fletcher, Simon and Longstaff, Andrew P. (2016) A new strategy for improving vision based tracking accuracy based on utilization of camera calibration information. In: The 22nd IEEE International Conference on Automation & Computing. ICAC (2016). IEEE, University of Essex, Colchester, UK, pp. 290-295. ISBN 978-1-8621813-1-1

Asim, Taimoor and Mishra, Rakesh (2016) Computational Fluid Dynamics Based Optimal Design of Hydraulic Capsule Pipelines Transporting Cylindrical Capsules. Powder Technology, 295. pp. 180-201. ISSN 0032-5910

Asim, Taimoor and Mishra, Rakesh (2016) Optimal design of hydraulic capsule pipelines transporting spherical capsules. Canadian Journal of Chemical Engineering, 94 (5). pp. 966-979. ISSN 0008-4034

Asim, Taimoor, Mishra, Rakesh, Abushaala, Sufyan and Jain, Anuj (2016) Development of a Design Methodology for Hydraulic Pipelines Carrying Rectangular Capsules. International Journal of Pressure Vessels and Piping, 146. pp. 111-128. ISSN 0308-0161

Asim, Taimoor, Mishra, Rakesh and Alseddiqi, Mohamed (2016) Development of an Information Quality Framework with Enhanced Treatment for Pedagogical Content in Engineering. International Journal of Handheld Computing Research, 7 (3). pp. 16-23. ISSN 1947-9158

Bai, Jinxuan, Bai, Qingshun, He, Xin and Tong, Zhen (2016) A multiscale simulation investigation on subsurface dislocation motion evolution mechanism in ultra-precision machining process. In: EUSPEN Conference 2016, 30/05/16 - 03/06/16, Nottingham.

Bai, Jinxuan, Bai, Qingshun, Tong, Zhen, Hu, Chao and He, Xin (2016) Evolution of surface grain structure and mechanical properties in orthogonal cutting of titanium alloy. Journal of Materials Research, 31 (24). pp. 3919-3929. ISSN 0884-2914

Bai, Qingshun, He, Xin, Bai, Jinxuan and Tong, Zhen (2016) An atomistic investigation of the effect of strain on frictional properties of suspended graphene. AIP Advances, 6 (5). 055308. ISSN 2158-3226

Ball, Andrew, Wang, Tian T., Tian, X. and Gu, Fengshou (2016) A robust detector for rolling element bearing condition monitoring based on the modulation signal bispectrum,. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Bevan, Adam and Klecha, Stephanie (2016) Use of Magnetic Flux Techniques to Detect Wheel Tread Damage. Proceedings of the ICE - Transport, 169 (5). pp. 330-338. ISSN 0965-092X

Bills, Paul J. (2016) Introduction to Computed Tomography as an aid to Forensic Analysis. In: Age Estimation Workshop, 13th - 14th May 2016, University of Huddersfield, UK. (Submitted)

Bills, Paul J., Shah, Paras, Townsend, Andrew, Blunt, Liam and Racasan, Radu (2016) Characterization of complex additive manufactured structures for the medical device industry using computed tomography. In: Dimensional X-Ray Computed Tomography Conference, 10th May 2016, National Physical Laboratory, London, UK. (Unpublished)

Brethee, Khaldoon F., Gu, Fengshou and Ball, Andrew (2016) Frictional effects on the dynamic responses of gear systems and the diagnostics of tooth breakages. Systems Science & Control Engineering, 4 (1). pp. 270-284. ISSN 2164-2583

Brethee, Khaldoon F., Zhang, Ruiliang, Hamad, Naima, Gu, Fengshou and Ball, Andrew (2016) Influence of Lubricant Starvation on Gearbox Vibration Signatures for Condition Monitoring. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Charlton, Matthew, Mishra, Rakesh and Asim, Taimoor (2016) The effect of manufacturing method induced roughness on severe service control valve performance. In: 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, December 15-17, 2016, MNNITA, Allahabad, U.P., India. (Unpublished)

Chen, Lei, Liu, Gang, Zhang, Guozhong, Tang, Yuannan and Chai, John (2016) Transient Stage Comparison of Couette Flow under Step Shear Stress and Step Velocity Boundary Conditions. International Communications in Heat and Mass Transfer, 75. pp. 232-239. ISSN 0735-1933

Di Laura, Anna, Whittaker, Robert, Hothi, Harry, Meswania, Jay, Henckel, Johann, de Villiers, Danielle, Kwon, Young-Min, Racasan, Radu, Bills, Paul J., Blunn, Gordon, Skinner, John and Hart, A. J. (2016) Understanding Why Dual-Taper Hips Fail. In: American Academy of Orthopaedic Surgeons Annual Meeting, 1-5 March 2016, Orlando, USA.

Elforjani, Badradin, Feng, Guojin, Gu, Fengshou and Ball, Andrew (2016) Energy Harvesting Based Wireless Sensor Nodes for The Monitoring Temperature of Gearbox. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Feng, Gao, Hu, Niaoqing, Mones, Z., Gu, Fengshou and Ball, Andrew (2016) An investigation of the orthogonal outputs from an on-rotor MEMS accelerometer for reciprocating compressor condition monitoring. Mechanical Systems and Signal Processing, 76-77. pp. 228-241. ISSN 0888-3270

Forbes, Alistair B., Papananias, Moschos, Longstaff, Andrew P., Fletcher, Simon, Mengot, Azibananye and Jonas, Kevyn (2016) Developments in automated flexible gauging and the uncertainty associated with comparative coordinate measurement. In: euspen's 16th International Conference & Exhibition, 30 May - 3 June, Nottingham, UK. european society for precision engineering and nanotechnology, pp. 111-112. ISBN 978-0-9566790-8-6

Gao, F., Xu, Yongjia, Ren, Hongyu, Zhang, Zonghua and Jiang, Xiang (2016) A novel camera calibration method for deflectometry system. In: 16th International Conference and Exhibition, 30th May-3rd June 2016, Nottingham, UK.

Gao, Jingwei, Wang, Ruichen, Hu, Lei and Zhang, Rui (2016) A novel manifold learning denoising method on bearing vibration signals. Journal of Vibroengineering, 18 (1). pp. 175-189. ISSN 1392-8716

Grossoni, Ilaria, Bezin, Yann and Neves, Sérgio (2016) Optimization of support stiffness at a railway crossing panel. In: Railways2016, 5-8 April 2016, Cagliari (Italy).

Haba, Usama, Feng, Guojin, Shaeboub, Abdulkarim, Peng, Xinyu, Gu, Fengshou and Ball, Andrew (2016) Detection and Diagnosis of Compound Faults in a Reciprocating Compressor based on Motor Current Signatures. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Hamad, Naima, Brethee, Khaldoon F., Gu, Fengshou and Ball, Andrew (2016) An Investigation of Electrical Motor Parameters in a Sensorless Variable Speed Drive for Machine Fault Diagnosis. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328

Hamza, Esam (2016) A review of using computational fluid dynamic in simulating of friction stir welding and parametric studies. In: 11th International Symposium on FSW (11ISFSW), 17-19 May 2016, TWI Ltd, Cambridge, UK. (Unpublished)

Hamza, Esam, Asim, Taimoor and Mishra, Rakesh (2016) Computational Fluid Dynamics based Transient Thermal Analysis of Friction Stir Welding. In: 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, December 15-17, 2016, MNNITA, Allahabad, U.P., India. (Unpublished)

Hassin, Osama, Yao, Aiying, Wei, Nasha, Gu, Fengshou and Ball, Andrew (2016) Monitoring Oil Levels Of Journal Bearings Based On The Analysis Of Vibration Signals. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Iorio, Lorenzo, Pagani, Luca, Strano, Matteo and Monno, Michele (2016) Design of Deformable Tools for Sheet Metal Forming. Journal of Manufacturing Science and Engineering, 138 (9). 094701. ISSN 1087-1357

Kapadia, Darshil, Racasan, Radu, Al-Hajjar, Mazen and Bills, Paul J. (2016) Characterizing edge-wear in ceramic-on-ceramic acetabular cups. In: International Society for Technology in Arthroplasty (ISTA) 29th Annual Congress, October 5-8 2016, Boston, MA, USA. (Submitted)

Khatir, Z., Kubiak, K.J., Jimack, P.K. and Mathia, T.G. (2016) Dropwise condensation heat transfer process optimisation on superhydrophobic surfaces using a multi-disciplinary approach. Applied Thermal Engineering, 106. pp. 1337-1344. ISSN 1359-4311

Kollar, László E., Mishra, Rakesh and Jain, Anuj (2016) Inverse Design of Blade Shapes for Vertical Axis Wind Turbines. In: 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power December 15-17, 2016,, 15-17 December 2016, MNNIT Allahaabd, India.

Kumar, P., Martin, H. and Jiang, X. (2016) Towards the development of a hybrid-integrated chip interferometer for online surface profile measurements. Review of Scientific Instruments, 87 (6). ISSN 0034-6748

Lambert, Mike and Tesfa, Belachew (2016) Robust Application of CBE and OBE for Engine Testing System Diagnosis. SAE Technical Papers. pp. 1-6. ISSN 0148-7191

Lane, Mark, Shaeboub, Abdulkarim, Gu, Fengshou and Ball, Andrew (2016) Investigation of Reductions in Motor Efficiency caused by Stator Faults when operated from an Inverter Drive. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328

Lee, Samuel Peter, Jupp, Martyn and Nickson, Ambrose (2016) The influence of secondary flow structures in a turbocharger turbine housing in steady state and pulsating flow conditions. In: 2016 7th International Conference on Mechanical and Aerospace Engineering (ICMAE). IEEE, pp. 154-159. ISBN 978-1467388290

Lee, Samuel Peter, Jupp, Martyn and Nickson, Ambrose (2016) The introduction of a tilted volute design for operation with a mixed flow turbine for turbocharger applications. In: 2016 7th International Conference on Mechanical and Aerospace Engineering (ICMAE). IEEE, pp. 165-170. ISBN 978-1467388290

Li, Guoxing, Gu, Fengshou, Wei, Nasha, Xu, Yuandong and Ball, Andrew (2016) A validated finite element model for predicting dynamic responses of cylinder liners in an IC engine*. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328

Li, Tukun, Racasan, Radu and Bills, Paul J. (2016) The evolution of Geometrical Product Specification and Verification in the field of surface metrology and the challenges of its vocational training. In: 12th International Scientific Conference on Coordinate Measuring Technique, 18th - 20th April 2016, Bielsko-BIala, Poland. (Unpublished)

Lin, Yu-Jiun, He, Peng, Tavakkoli, Mohammad, Mathew, Nevin Thunduvila, Yap, Yit-Fatt, Chai, John, Goharzadeh, Ashfin, Vargas, F. M. and Biswal, S. L. (2016) Examining Asphaltene Solubility on Deposition in Model Porous Media. Langmuir, 32 (34). pp. 8729-8734. ISSN 0743-7463

Liu, Fulong, Gu, Fengshou, Zhao, Yunshi and Ball, Andrew (2016) A validation study of ACS-SSI for online condition monitoring of vehicle suspension systems. Vibroengineering Procedia, 10. pp. 369-375. ISSN 2345-0533

Liu, Xiaoyuan, Alfi, Stefano and Bruni, Stefano (2016) An efficient condition monitoring strategy of railway vehicle suspension based on recursive least-square algorithm. In: Proceedings of the 24th Symposium of the International Association for Vehicle System Dynamics. IAVSD 2015 . Taylor & Francis, Graz, Austria, p. 861. ISBN 978-1-4987-7702-5

Liu, Xiaoyuan, Alfi, Stefano and Bruni, Stefano (2016) An efficient recursive least square-based condition monitoring approach for a rail vehicle suspension system. Vehicle System Dynamics, 54 (6). pp. 814-830. ISSN 0042-3114

Lou, Shan, Jiang, Xiang, Zeng, Wenhan, Abdul-Rahman, Hussein S. and Scott, Paul J. (2016) The use of morphological methods for the extraction of topographical features from complex additive manufactured surfaces. In: MATHMET 2016 - International Workshop on Mathematics and Statistics for Metrology, 7-9 Nov 2016, PTB-Berlin, Abbestr. 2-12, 10587 Berlin, Germany. (Unpublished)

Lou, Shan, Jiang, Xiang, Zeng, Wenhan, Hussein, Abdul-Rahman and Paul, Scott (2016) Investigation of the compatibility of X-CT measurement data to surface topography analysis. In: Dimensional X-ray Computed Tomography Conference 2016, 9 May 2016, NPL, Teddington, London. (Unpublished)

Lou, Shan, Sun, Wenjuan, Zeng, Wenhan, Abdul-Rahman, Hussein S., Jiang, Xiangqian and Paul, Scott (2016) Extraction of Process Signature Features from Additive Manufactured Metal Surfaces. In: 16th International Conference on Metrology and Properties of Engineering Surfaces, 27th-29th June 2017, Gothenburg, Sweden. (Unpublished)

Lou, Shan, Townsend, Andrew, Jiang, Xiang, Blunt, Liam, Zeng, Wenhan and Paul, Scott (2016) On characterising surface topography of metal powder bed fusion additive manufactured parts. In: euspen's 16th International Conference, 30 May - 3 June 2016, Nottingham, UK.

Lu, Wenlong, Qin, Yuchu, Qi, Qunfen, Zeng, Wenhan, Zhong, Yanru, Liu, Xiaojun and Jiang, Xiang (2016) Selecting a semantic similarity measure for concepts in two different CAD model data ontologies. Advanced Engineering Informatics, 30 (3). pp. 449-466. ISSN 1474-0346

Mavromihales, Mike and Holmes, Violeta (2016) Review of Research in Games-based Approaches with Examples in Engineering Education. In: CARN International Conference, 11-14 November 2016, Lincoln, UK.

Mones, Zainab, Feng, G., Ogbulaor, U.E., Wang, T., Gu, Fengshou and Ball, Andrew (2016) Performance evaluation of wireless MEMS accelerometer for reciprocating compressor condition monitoring. In: Power Engineering: Proceedings of the International Conference on Power Transmissions. ICPT (2016). Taylor & Francis, Chongqing, P.R. China, pp. 893-900. ISBN 978-1-138-03267-5

Moschetti, Giuseppe, Forbes, Alistair, Leach, Richard K, Jiang, Xiang and O’Connor, Daniel (2016) Phase and fringe order determination in wavelength scanning interferometry. Optics Express, 24 (8). pp. 8997-9012. ISSN 1094-4087

Moschetti, Giuseppe, Forbes, Alistair B., Leach, Richard, Jiang, Xiang and Connor, Daniel (2016) Quadrature wavelength scanning interferometry. Applied Optics, 55 (20). pp. 5332-5340. ISSN 1559-128X

Muhamedsalih, Yousif, Bevan, Adam and Stow, Julian (2016) Wheel Wear and Rail Damage Prediction for Wheels Turned with Thin Flanges. In: 11th World Congress on Railway Research, 29th May - 2nd June 2016, Milan, Italy. (Unpublished)

Oliveira, Antonio C., Charlton, Matthew and Mishra, Rakesh (2016) Effect of Inlet Flow Characteristics on the Volume Fraction Distribution within a Severe Service Trim and the Valve Flow Coefficient. In: 43rd National Conference on Fluid Mechanics and Fluid Power, 15-17 December 2016, Allahabad, India. (Submitted)

Pagani, Luca and Scott, Paul J. (2016) Areal surface texture parameters on surface. In: Dimensional Accuracy and Surface Finish in Additive Manufacturing. American Society for Precision Engineering, North Carolina, USA.

Pagani, Luca and Scott, Paul J. (2016) A sampling strategy based on B-wavelets decomposition. Procedia CIRP, 43. pp. 29-34. ISSN 2212-8271

Papananias, Moschos, Fletcher, Simon, Longstaff, Andrew P. and Mengot, Azibananye (2016) A novel method based on Bayesian regularized artificial neural networks for measurement uncertainty evaluation. In: euspen's 16th International Conference & Exhibition, 30 May - 3 June, Nottingham, UK. european society for precision engineering and nanotechnology, pp. 97-98. ISBN 978-0-9566790-8-6

Parkinson, Simon, Vallati, Mauro, Chrpa, Lukáš, Longstaff, Andrew P. and Fletcher, Simon (2016) Planning Machine Activity Between Manufacturing Operations: Maintaining Accuracy While Reducing Energy Consumption. In: 10th Scheduling and Planning Applications woRKshop (SPARK), 14th June 2016, Kings College, London. (Unpublished)

Potdar, Akshay Anand (2016) Reducing the uncertainty of thermal model calibration using on-machine probing and data fusion. Doctoral thesis, University of Huddersfield.

Potdar, Akshay Anand, Fletcher, Simon and Longstaff, Andrew P. (2016) Performance characterisation of a new photo-microsensor based sensing head for displacement measurement. Sensors and Actuators A: Physical, 238. pp. 60-70. ISSN 09244247

Qi, Qunfen, Scott, Paul J., Jiang, Xiangqian and Lu, Wenlong (2016) A hierarchical category model for geometrical product specifications (GPS). Procedia CIRP, 43. pp. 214-219. ISSN 2212-8271

Qin, Yuchu, Lu, Wenlong, Qi, Qunfen, Li, Tukun, Huang, Meifa, Scott, Paul J. and Jiang, Xiang (2016) Explicitly representing the semantics of composite positional tolerance for patterns of holes. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Qin, Yuchu, Lu, Wenlong, Qi, Qunfen, Liu, Xiaojun, Zhong, Yanru, Scott, Paul J. and Jiang, Xiang (2016) Status, comparison, and issues of CAD model data exchange methods based on standardized neutral files and OWL file. Journal of Computing and Information Science in Engineering, 17 (1). ISSN 1530-9827

Rehab, Ibrahim, Tian, Xiange, Zhang, Ruiliang, Gu, Fengshou and Ball, Andrew (2016) A Study Of The Diagnostic Amplitude Of Rolling Bearing Under Increasing Radial Clearance Using Modulation Signal Bispectrum. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Ren, Hongyu, Gao, Feng and Jiang, Xiang (2016) Simulation study of a refined approach for specular surfaces reconstruction in deflectometry. In: 16th International Conference and Exhibition EUSPEN, 30th May-3rd June 2016, Nottingham, UK.

Rezk, Ahmed, Carter, Jeff, Jupp, Martyn, Nickson, Keith and Allport, John (2016) Investigation of an electrically assisted turbocharger with energy recovery for a heavy duty diesel engine. In: The 12th International Conference on Turbochargers and Turbocharging. Institution of Mechanical Engineers, London, pp. 319-330. ISBN 978-0-9572374-7-6

Scholes, Susan C., Colledge, Coral J., Naylor, Andrew, Mahdi, Mohammed H., Smith, Alan M. and Joyce, Thomas (2016) Potential Synthetic Biolubricant as an Alternative to Bovine Serum. Lubricants, 4 (4). p. 38. ISSN 2075-4442

Shackleton, Philip, Bezin, Yann, Crosbee, David, Molyneux-Berry, Paul and Kaushal, Aniruddha (2016) Development of a new running gear for the Spectrum intermodal vehicle. In: IAVSD 24th International Symposium on Dynamics of Vehicles on Roads and Tracks, 17th - 21st August 2015, Graz, Austria.

Shaeboub, Abdulkarim, Lane, Mark, Haba, Usama, Gu, Fengshou and Ball, Andrew (2016) Detection and Diagnosis of Compound Faults in Induction Motors Using Electric Signals from Variable Speed Drives. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328

Shah, Paras, Racasan, Radu and Bills, Paul J. (2016) Challenges in measurement and specification of complex additive manufactured structures for the medical device industry. In: ASTM Workshop on Additive Manufacturing for Medical Applications, 3rd May 2016, San Antonio, TX, USA. (Unpublished)

Shah, Paras, Racasan, Radu and Bills, Paul J. (2016) Comparison of Different Additive Manufacturing Methods Using Computed Tomography. Case Studies in Nondestructive Testing and Evaluation. ISSN 2214-6571

Shah, Paras, Racasan, Radu and Bills, Paul J. (2016) Comparison of Different Additive Manufacturing Methods Using Optimized Computed Tomography. In: Dimensional X-Ray Computed Tomography Conference, 10th May 2016, National Physical Laboratory, London, UK. (Unpublished)

Shah, Paras, Racasan, Radu and Bills, Paul J. (2016) Comparison of Different Additive Manufacturing Methods Using Optimized Computed Tomography. In: 6th Conference on Industrial Computed Tomography, 9th -12th February 2016, Wels, Austria.

Shebani, Amer (2016) Prediction of wheel and rail wear using artificial neural networks. Doctoral thesis, University of Huddersfield.

Shih, Jou-Yi, Thompson, D.J. and Zervos, A. (2016) Modelling scheme for railway vehicle/track/ground dynamic interaction in the time domain. In: Proceeding of the 24th UK conference of the Association for Computational Mechanics in Engineering, 31st March-1st April 2016, Cardiff, Wales.

Sichani, Matin Sh., Enblom, R. and Berg, M. (2016) An alternative to FASTSIM for tangential solution of the wheel?rail contact. Vehicle System Dynamics. pp. 748-764. ISSN 0042-3114

Sichani, Matin Sh., Enblom, Roger and Berg, Mats (2016) A fast wheel–rail contact model for application to damage analysis in vehicle dynamics simulation. Wear, 366-67. pp. 123-130. ISSN 0043-1648

Smith, Ann, Gu, Fengshou and Ball, Andrew (2016) Maintaining model efficiency, avoiding bias and reducing input parameter volume in compressor fault classification. In: 2016 7th International Conference on Mechanical and Aerospace Engineering (ICMAE). IEEE, pp. 196-201. ISBN 978-1467388290

Tong, Zhen, Jiang, Xiang, Bai, Qingshun, Blunt, Liam and Luo, Xichun (2016) Atomistic investigation of the wear of nanoscale diamond cutting tools shaped by focused ion beam. In: Euspen’s 16th international conference, 30/05/16 - 03/06/16, Nottingham.

Tong, Zhen, Jiang, Xiang, Luo, Xichun, Bai, Qingshun, Blunt, Liam, Xu, Zongwei and Liang, Yingchun (2016) Review on FIB-induced damage in diamond materials. Current Nanoscience, 12 (6). pp. 685-695. ISSN 1573-4137

Townsend, Andrew, Blunt, Liam and Bills, Paul J. (2016) Investigating the capability of microfocus x-ray computed tomography for areal surface analysis of additively manufactured parts. In: American Society for Precision Engineering Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing, 27th - 30th June 2016, Raleigh, North Carolina, USA.

Townsend, Andrew and Mishra, Rakesh (2016) Design and development of a helium injection system to improve external leakage detection during liquid nitrogen immersion tests. Cryogenics, 79. pp. 17-25. ISSN 00112275

Townsend, Andrew, Pagani, Luca, Yin, Changji, Bills, Paul J. and Blunt, Liam (2016) Areal surface texture measurement of additively manufactured parts. In: ASTM Workshop on Additive Manufacturing for Medical Applications, 3rd May 2016, San Antonio, TX, USA. (Unpublished)

Townsend, Andrew, Senin, N., Blunt, Liam, Leach, R.K. and Taylor, J.S. (2016) Surface texture metrology for metal additive manufacturing: a review. Precision Engineering, 46. pp. 34-47. ISSN 0141-6359

Unver, Ertu (2016) Exhibition of Design, Development and Manufacturing of Scalp Cooling Cap. [Show/Exhibition]

Unver, Ertu, Sorbie, Chris, Silkstone, Robert, Kagioglou, Mike, Paxman, Richard and Burke, Patrick (2016) Design and Development of a Medical Product Using 3D Technologies: Scalp Cooling Cap Design Case Study. In: International Conference on Sustainable Smart Manufacturing (S2M), 20 - 22 Oct, 2016, Portugal. (Unpublished)

Walker, David D. (2016) CNC Polishing and Metrology – from E-ELT Segments to Commercial Optics. In: Academic seminar by Prof David Walker: The Institute of Optics And Electronics, The chinese Academy of Sciences:, 6-8 June 2016, Chengdu, China. (Unpublished)

Walker, David D., Yu, G., Bibby, M., Dunn, C., Li, H., Wu, H. Y., Zheng, X. and Zhang, P. (2016) Robotic automation in computer controlled polishing. Journal of the European Optical Society: Rapid Publications, 11. p. 16005. ISSN 1990-2573

Walker, David D., Yu, Guoyu, Li, Hongyu, Reynolds, Christina and Bibby, Matt (2016) Closing the Metrology – Process Loop in CNC Polishing. SPIE - International Society for Optical Engineering. Proceedings, 10009. ISSN 0277-786X

Walker, Joshua, Asim, Taimoor, Mishra, Rakesh and Adams, Martin (2016) Life-Cycle Cost Modelling of Pneumatic Conveying Pipelines for the Lean Phase Transport Condition. In: 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, December 15-17, 2016, MNNITA, Allahabad, U.P., India. (Unpublished)

Walton, Karl, Fleming, Leigh, Goodhand, Martin, Racasan, Radu and Zeng, Wenhan (2016) High fidelity replication of surface texture and geometric form of a high aspect ratio aerodynamic test component. Surface Topography: Metrology and Properties, 4 (2). 025003. ISSN 2051-672X

Wang, Ruichen, Gao, Jingwei, Gu, Fengshou and Ball, Andrew (2016) Research on effect of gas-charged accumulator capacity on hydraulic regenerative shock absorber system. In: Energy and Mechanical Engineering: Proceedings of 2015 International Conference on Energy and Mechanical Engineering. World Scientific, pp. 765-774. ISBN 9789814749510

Wang, Ruichen, Gu, Fengshou, Cattley, Robert and Ball, Andrew (2016) Modelling, Testing and Analysis of a Regenerative Hydraulic Shock Absorber System. Energies, 9 (5). ISSN 1996-1073

Williamson, James (2016) Dispersed reference interferometry for on-machine metrology. Doctoral thesis, University of Huddersfield.

Wojciechowski, S., Twardowski, P., Pelic, M., Maruda, R.W., Barrans, Simon and Krolczyk, G.M. (2016) Precision surface characterization for finish cylindrical milling with dynamic tool displacements model. Precision Engineering, 46. pp. 158-165. ISSN 0141-6359

Woodcock, Rebecca, Muhamedsalih, Hussam, Martin, Haydn and Jiang, Xiangqian (2016) Burg algorithm for enhancing measurement performance in wavelength scanning interferometry. Surface Topography: Metrology and Properties, 4 (2). 024003. ISSN 2051-672X

Xu, M., Lu, H., Gong, L., Chai, John and Duan, X. (2016) Parametric Numerical Study of the Flow and Heat Transfer in Microchannel with Dimples. International Communications in Heat and Mass Transfer, 76. pp. 348-357. ISSN 0735-1933

Yap, Y. F., Goharzadeh, A. and Chai, John (2016) Computation of multiphase flows using the level-set method. In: International Heat Transfer Symposium Conference 2016 (IHTS 2016), 26 - 29 June 2016, Nottingham. (Unpublished)

Young, Christian, Blunt, Liam, Mohamed, Zavid and Tong, Zhen (2016) Development of ultra-precision abrasive machining of functional structured surfaces. In: The euspen’s 16th international conference & exhibition, 30 May 2016, Notthingham.

Zahariev, Martin E. (2016) Flow diagnostics and optimal design of vertical axis wind turbines for urban environments. Masters thesis, University of Huddersfield.

Zeng, Wenhan, Jiang, Xiang, Lou, Shan, Abdul-Rahman, Hussein S. and Scott, Paul J. (2016) Complex Structured Surface Characterisation by using PDE based Adaptive Nonlinear Diffusion Filter. In: International Workshop on Mathematics and Statistics for Metrology, 7-9th November 2016, Berlin, Germany. (Unpublished)

Zeng, Wenhan, Jiang, Xiang, Lou, Shan and Scott, Paul J. (2016) A Key Point Method for Data Registration for MultiSensor Fusion. In: EUSPEN 16th International Conference & Exhibition, 30th May - 3rd June 2016, Nottingham, UK. (Unpublished)

Zhang, Xianlian, He, Xiaocong, Xing, Baoying, Zhao, Lun, Lu, Yi, Gu, Fengshou and Ball, Andrew (2016) Influence of heat treatment on fatigue performances for self-piercing riveting similar and dissimilar titanium, aluminium and copper alloys. Materials & Design, 97. pp. 108-117. ISSN 0264-1275

Zhuang, Y., Goharzadeh, A., Lin, Y.J., Yap, Y. F., Chai, John, Mathew, N., Vargas, F. M. and Biswal, S. L. (2016) Three Dimensional Measurements of Asphaltene Deposition in a Transparent Micro-Channel. Journal of Petroleum Science and Engineering, 145. pp. 77-82. ISSN 0920-4105

leung, Isaac Pak Hung and Fleming, Leigh (2016) In-vitro replication, measurement and characterisation of fretting wear for development of total hip replacement prostheses. In: 3rd International Conference on BioTribology (ICoBT 2016), 11-14th September 2016, Imperial College, London. (Unpublished)

2015

Abdulshahed, Ali, Longstaff, Andrew P. and Fletcher, Simon (2015) The application of ANFIS prediction models for thermal error compensation on CNC machine tools. Applied Soft Computing, 27. pp. 158-168. ISSN 1568-4946

Abdulshahed, Ali, Longstaff, Andrew P. and Fletcher, Simon (2015) A particle swarm optimisation-based Grey prediction model for thermal error compensation on CNC machine tools. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. Euspen, Huddersfield, UK, pp. 369-378. ISBN 978-0-9566790-5-5

Abdulshahed, Ali, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2015) Thermal error modelling of machine tools based on ANFIS with fuzzy c-means clustering using a thermal imaging camera. Applied Mathematical Modelling, 39 (7). pp. 1837-1852. ISSN 0307-904X

Abuaniza, Ayman, Fletcher, Simon, Mian, Naeem S. and Longstaff, Andrew P. (2015) Machine structure simulation using FEA and optimised thermal parameters. In: Laser Metrology and Machine Performance (LAMDAMAP) 2015, 17-18 March 2015, University of Huddersfield. (Unpublished)

Abusaad, Samieh, Benghozzi, Ahmed, Smith, Ann, Gu, Fengshou and Ball, Andrew (2015) The Detection of Shaft Misalignments using Motor Current Signals from a Sensorless Variable Speed Drive. In: Vibration Engineering and Technology of Machinery. Mechanisms and Machine Science (23). Springer, London, pp. 173-183. ISBN 978-3-319-09918-7

Abusaad, Samieh, Brethee, Khaldoon F., Assaeh, M., Zhang, Ruiliang, Gu, Fengshou and Ball, Andrew (2015) The detection of lubricating oil viscosity changes in gearbox transmission systems driven by sensorless variable speed drives using electrical supply parameters. Journal of Physics: Conference Series, 628. 012078. ISSN 1742-6588

Abusaad, Samieh, Gu, Fengshou, Zhang, R. and Ball, Andrew (2015) Observer-based Fault Detection and Diagnosis for Mechanical Transmission Systems with Sensorless Variable Speed Drives. In: 28th International Congress of Condition Monitoring and Diagnostic Engineering Management (COMADEM 2015), 1st - 4th December 2015, Buenos Aires, Argentina.

Ahmed, Noukhez, Asim, Taimoor, Mishra, Rakesh, Sivagnanasundaram, Subenuka and Eynon, Paul (2015) Optimal Vaneless Diffuser Design For A High-End Centrifugal Compressor. In: COMADEM 2015, 1st-4th December 2015, Buenos Aires, Argentina. (Unpublished)

Alghadhi, Mostafa (2015) Validation of Vehicle Fuel Consumption. Doctoral thesis, University of Huddersfield.

Alghadi, Mostafa, Ball, Andrew, Mishra, Rakesh and Asim, Taimoor (2015) Drive Cycle Optimisation for Pollution Reduction. In: 2nd International Conference on Petroleum and Petrochemical Engineering, 10-11 January 2015, Dubai (UAE). (Unpublished)

Alzarok, Hamza, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2015) Investigation of a new method for improving image resolution for camera tracking applications. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 40-50. ISBN 978-0-9566790-5-5

Argyropoulou, Maria, Reid, Iain, Michaelides, Roula and Ioannou, George (2015) Supply Chain Information Systems and Organisational Performance in Economic Turbulent Times. In: IEEM2015 International conference on Industrial Engineering and Engineering Management, 6th - 9th December 2015, Singapore.

Asim, Taimoor and Mishra, Rakesh (2015) Computational Fluid Dynamics based Flow Diagnostics in Hydraulic Capsule Pipeline Bends. In: FLUVISU 2015, 16th-20th November, Pleumeur-Bodou/Lannion, France. (Unpublished)

Asim, Taimoor and Mishra, Rakesh (2015) Numerical Investigations on Vortical Structures in the Near Tongue Region of a Centrifugal Pump during Transient Operation. In: FLUVISU 2015, 16th-20th November, Pleumeur-Bodou/Lannion, France. (Unpublished)

Asim, Taimoor and Mishra, Rakesh (2015) Numerical Investigations on the Performance Degradation of a Vertical Axis Wind Turbine Operating in Dusty Environment. In: FLUVISU 2015, 16th-20th November, Pleumeur-Bodou/Lannion, France. (Unpublished)

Asim, Taimoor and Mishra, Rakesh (2015) Numerical Investigations on the Transient Performance of a Centrifugal Pump. In: 42nd National Conference on Fluid Mechanics and Fluid Power, 14th - 16th December 2015, Surathkal, India. (Unpublished)

Asim, Taimoor, Mishra, Rakesh, Kaysthagir, Sree and Aboufares, Ghada (2015) Performance Comparison of a Vertical Axis Wind Turbine using Commercial and Open Source Computational Fluid Dynamics based Codes. In: The International Conference on Jets, Wakes and Separated Flows, 16-18 June 2015, Stockholm, Sweden. (Submitted)

Barrans, Simon, Eyre, Gareth and Goddard, Michael (2015) Bespoke Part Library for an SME for Enhanced Design Efficiency. Applied Mechanics and Materials, 798. pp. 500-504. ISSN 1662-7482

Bevan, Adam (2015) Effective Management of the Wheel-Rail Interface on Light-rail Networks. In: 1st Annual WRI EU Conference, 21st - 23rd October 2015, Derby, UK. (Unpublished)

Bezin, Yann, Grossoni, Ilaria and Neves, Sérgio (2015) Impact of wheel shape on the vertical damage of cast crossing panels in turnouts. In: 24th International Symposium on Dynamics of Vehicles on Roads and Tracks, 17th - 21st August 2015, Graz, Austria.

Bills, Paul J., Racasan, Radu, Tessier, P and Blunt, Liam (2015) Assessing the material loss of the modular taper interface in retrieved metal on metal hip replacements. Surface Topography: Metrology and Properties, 3 (2). 025002. ISSN 2051-672X

Blunt, Liam, Bills, Paul J. and Fleming, Leigh (2015) Metrology for Bio Systems. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, March 2-5 2015, Charlotte, NC, USA. (Submitted)

Blunt, Liam, Muhamedsalih, Hussam and Elrawemi, Mohamed (2015) Implementation of wavelength scanning interferometry for R2R flexible PV barrier films. In: EUSPEN 15th International Conference & Exhibition. EUSPEN, Leuven, Belgium. ISBN 978-0-9566790-7-9

Brethee, Khaldoon F., Gao, Jingwei, Ball, Andrew and Gu, Fengshou (2015) Analysis of Frictional Effects on the Dynamic Response of Gear Systems and the Implications for Diagnostics. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). IEEE. ISBN 978-0-9926801-0-7

Burgelman, N., Sichani, Matin Sh., Enblom, R., Berg, M., Li, Z. and Dollevoet, R. (2015) Influence of wheel-rail contact modelling on vehicle dynamic simulation. Vehicle System Dynamics, 53 (8). pp. 1190-1203. ISSN 0042-3114

Chai, John (2015) History of Radiation Heat Transfer Solution Procedure using Finite-Volume Method at the University of Minnesota. In: CHT'15 6th International Symposium on Advances in Computational Heat Transfer, May 25 – 29, 2015, Rutgers University, USA..

Chen, Zhi, Wang, Tie, Gu, Fengshou and Jing, Peng (2015) Characterizing the Dynamic Response of a Chassis Frame in a Heavy-Duty Dump Vehicle based on an Improved Stochastic System Identification. Shock and Vibration. ISSN 1875-9203

Chen, Zhi, Wang, Tie, Gu, Fengshou, Zhang, Ruiliang and Shen, Jinxian (2015) The average correlation signal based stochastic subspace identification for the online modal analysis of a dump truck frame. Journal of vibroengineering, 17 (4). pp. 1971-1988. ISSN 1392-8716

Colligon, John and Vishnyakov, Vladimir (2015) Applications of Energy-Assistance to the formation of novel surface coatings. Innovation into Success (17). pp. 65-68.

Crosbee, David and Allen, Paul (2015) Development of a Tram-Train wheel profile for dual-operation running. In: 1st International IMechE Stephenson Conference, 21st - 23rd April 2015, London.

Ding, Hao, Qi, Qunfen, Scott, Paul J. and Jiang, Xiang (2015) An ANOVA method of evaluating the specification uncertainty in roughness measurement. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK. ISBN 978-0-9566790-5-5

Ding, Hao, Scott, Paul J. and Jiang, X. (2015) A Criterion for Comparing Measurement Results and Determining Conformity with Specifications. Procedia CIRP, 27. pp. 143-148. ISSN 2212-8271

Elsayed, Ahmed, Al-dadah, Raya K., Mahmoud, Saad and Rezk, Ahmed (2015) Numerical investigation of turbulent flow heat transfer and pressure drop of AL2O3/water nanofluid in helically coiled tubes. International Journal of Low-Carbon Technologies, 10 (3). pp. 275-282. ISSN 1748-1317

Enbaya, Anwar, Asim, Taimoor, Mishra, Rakesh and Rao, Raj (2015) Numerical Analysis of a Railway Compartment Fire. In: ICRESH-ARMS Conference, 1-4 June 2015, Luleå University of Technology, Sweden.

Enbaya, Anwar, Asim, Taimoor, Mishra, Rakesh and Rao, Raj B. K. N. (2015) Fire Safety Analysis of a Railway Compartment using Computational Fluid Dynamics. International Journal of COMADEM, 18 (3). pp. 37-44. ISSN 1363-7681

Feng, Guojin, Zhen, Dong, Tian, Xiange, Gu, Fengshou and Ball, Andrew (2015) A Novel Method to Improve the Resolution of Envelope Spectrum for Bearing Fault Diagnosis Based on a Wireless Sensor Node. In: Vibration Engineering and Technology of Machinery. Springer, pp. 765-775. ISBN 978-3-319-09918-7

Foster, Katie, Bills, Paul J., Blunt, Liam, Jiang, Xiang and Leary, Richard (2015) The use of additive manufacturing for the presentation of ballistic toolmark evidence in court. In: 7th European Academy of Forensic Science Conference, 6-11 September 2015, Prague, Czech Republic.

Freegah, Basim, Asim, Taimoor and Mishra, Rakesh (2015) Effect of solar heat flux and thermal loading on the flow distribution within the riser pipes of a closed-loop solar thermo-syphon hot water system. In: COMADEM 2015, 1st - 4th December 2015, Buenos Aires, Argentina. (Unpublished)

Freegah, Basim, Asim, Taimoor, Mishra, Rakesh and Zala, Karina (2015) Numerical Investigations on the Effects of Transient Heat Input and Loading Conditions on the Performance of a Single-phase Closed-loop Thermo-syphon. In: 42nd National Conference on Fluid Mechanics and Fluid Power, 14th - 16th December 2015, Surathkal, India. (Unpublished)

Gao, F., Muhamedsalih, Hussam, Tang, Dawei, Elrawemi, Mohamed, Blunt, Liam, Jiang, Xiang, Edge, Steven, Bird, David and Hollis, Philip (2015) In-situ defect detection systems for R2R flexible PV films. In: ASPE 2015 Summer Topical Meeting. American Society for Precision Engineering, Colarado, USA, pp. 44-49. ISBN 978-1-887706-68-1

Gao, Jingwei, Wang, Ruichen, Zhang, Rui and Li, Yuan (2015) A novel fault diagnosis method for rotating machinery based on S transform and morphological pattern spectrum. Journal of the Brazilian Society of Mechanical Sciences and Engineering. ISSN 1678-5878

Goodhand, Martin N., Walton, Karl, Blunt, Liam, Lung, Hang W., Miller, Robert J. and Marsden, Reg (2015) The Limitations of “Ra” to Describe Surface Roughness. In: ASME Proceedings | Transitional Flows (With Turbomachinery) : ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. ASME, V05CT16A003. ISBN 978-0-7918-5673-4

Groschl, Andreas, Gotz, Jurgen, Loderer, Andreas, Bills, Paul J. and Hausotte, Tino (2015) Measures of improvement MUVoT, a Blended Learning course on the topic of Measurement Uncertainty for advanced Vocational Training. Procedia CIRP, 27. pp. 111-116. ISSN 2212-8271

Grossoni, Ilaria, Iwnicki, Simon, Bezin, Yann and Gong, Cencen (2015) Dynanics of a vehicle-track coupling system at a rail joint. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 229 (4). pp. 364-374. ISSN 0954-4097

Han, Feng, Yang, Shuming, Jing, Weixuan, Wang, Liangjun, Li, Lei, Jiang, Zhuangde and Gao, Feng (2015) Effect of Ag Thin Films on the Photoluminescence of ZnO Films. Journal of Nanoscience and Nanotechnology, 15 (5). pp. 3796-3801. ISSN 1533-4880

Hassin, Osama, Wei, Nasha, Towsyfyan, Hossein, Gu, Fengshou and Ball, Andrew (2015) Journal bearing lubrication monitoring based on spectrum cluster analysis of vibration signals. In: 28th International Congress of Condition Monitoring and Diagnostic Engineering Management (COMADEM 2015), 1st - 4th December 2015, Buenos Aires, Argentina.

Hothi, Harry, Berber, R, Whittaker, Robert, Bills, Paul J., Skinner, John and Hart, A. J. (2015) Detailed Inspection of Metal Implants. Hip International, 25 (3). pp. 227-231. ISSN 1120-7000

Hothi, Harry, Whittaker, Robert, Meswania, Jay, Bills, Paul J., Blunt, Liam, Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, A. J. (2015) Material Loss at the Head Taper Junction of the Metal-on-Metal Pinnacle Total Hip Replacement. In: Orthopaedic Research Society Annual Meeting, March 28-31 2015, Las Vegas, NV, USA. (Submitted)

Hubert, C., Kubiak, Krzysztof, Bigerelle, M., Dubois, A. and Dubar, L. (2015) Identification of lubrication regime on textured surfaces by multi-scale decomposition. Tribology International, 82 (B). pp. 375-386. ISSN 0301-679X

Igual, Javier Zamorano and Xu, Qiang (2015) Determination of the material constants of creep damage constitutive equations using Matlab optimization procedure. In: IEEE International Conference on Automation and Computing (ICAC 2015), 11th - 12th September 2015, Glasgow, Scotland.

Kollar, László E., Lucas, Gary and Meng, Yiqing (2015) Reconstruction of velocity profiles in axisymmetric and asymmetric flows using an electromagnetic flow meter. Measurement Science and Technology, 26 (5). ISSN 0957-0233

Krolczyk, G.M., Nieslony, P., Krolczyk, J.B., Samardzic, I., Legutko, S., Hloch, S., Barrans, Simon and Maruda, R.W. (2015) Influence of argon pollution on the weld surface morphology. Measurement, 70. pp. 203-213. ISSN 0263-2241

Lan, Xiangqi, Jiang, Xiang, Zeng, Wenhan and Blunt, Liam (2015) Construct Surface Characterization System by Assembling Functional Components Dynamically. Procedia CIRP, 27. pp. 198-201.

Lane, M., Ashari, Djoni, Ball, Andrew and Gu, Fengshou (2015) Investigation of Motor Supply Signature Analysis to Detect Motor Resistance Imbalances. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). IEEE. ISBN 978-0-9926801-0-7

Lane, Mark, Ashari, Djoni, Gu, Fengshou and Ball, Andrew (2015) Investigation of Motor Current Signature Analysis in Detecting Unbalanced Motor Windings of an Induction Motor with Sensorless Vector Control Drive. In: Vibration Engineering and Technology of Machinery. Springer, pp. 801-810. ISBN 978-3-319-09918-7

Li, Guoxing, Wang, Tie, Zhang, Ruiliang, Gu, Fengshou and Shen, Jinxian (2015) An Improved Optimal Slip Ratio Prediction considering Tyre Inflation Pressure Changes. Journal of Control Science and Engineering, 2015. pp. 1-8. ISSN 1687-5249

Li, H.Y., Yap, Y.F., Lou, J., Chai, John and Shang, Z. (2015) Numerical investigation of conjugated heat transfer in a channel with a moving depositing front. International Journal of Thermal Sciences, 88. pp. 136-147. ISSN 12900729

Lin, Y.J., Tavakholi, M., He, P., Sun, Y.J., Yap, Y. F., Chai, John, Goharzadeh, A., Vargas, F. M. and Biswal, S. L. (2015) Asphaltene Aggregation and Deposition in Porous Micromodel. In: 2015 AIChE Annual Meeting, Nov. 8 – 13, 2015, Salt Lake City, Utah, USA..

Lou, Shan, Jiang, Xiang, Zeng, Wenhan, Abdul-Rahman, Hussein S. and Paul, Scott (2015) From planar surfaces based on lattices to freeform surfaces based on triangular meshes: an advanced extension of the areal motif method. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, 2-5 March 2015, Charlotte, North Carolina, USA. (Unpublished)

Lou, Shan, Jiang, Xiang, Zeng, Wenhan and Paul, Scott (2015) A theoretical insight into morphological operations in surface measurement by introducing the slope transform. Journal of Zhejiang University Science A, 16 (5). pp. 395-403. ISSN 1673-565X

Lu, Wenlong, Yu, Nengguo, Zou, Xianglong, Liu, Xiaojun, Zhou, Liping and Li, Tukun (2015) Evaluation of MEMS Structures with Directional Characteristics Based on FRAT and Lifting Wavelet. Procedia CIRP, 27. pp. 298-302. ISSN 2212-8271

Luo, Xichun, Cao, Yi and Tong, Zhen (2015) Proceedings of the 20th International Conference on Automation and Computing (ICAC'14) Future Automation, Computing & Manufacturing. ICAC, 14 . University of Strathclyde Press, Strathclyde, UK. ISBN 978-1-909522-02-2

Meng, X.Z., Lu, Z., Jin, L.W., Zhang, L.Y., Hu, W.Y., Wei, L.C. and Chai, John (2015) Experimental and Numerical Investigation on Thermal Management of an Outdoor Battery Cabinet. Applied Thermal Engineering, 91. pp. 210-224. ISSN 1359-4311

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2015) FEA-based design study for optimising non-rigid error detection on machine tools. In: Laser Metrology, Machine Tool, CMM & Robotic Performance (LAMDAMAP), 17th - 18th March, 2015, Univeristy of Huddersfield.

Mishra, Rakesh, Albarzenji, Dlir, Shrawasti, Sahare, Sendanayake, Isuru and Pradhan, Suman (2015) Flow diagnostics. In: FLUVISU 2015, 16th - 20th November 2015, Pleumeur-Bodou/Lannion, France.

Moschetti, Giuseppe, Muhamedsalih, Hussam, Connor, Daniel, Jiang, Xiang and Leach, Richard K. (2015) Vertical axis non-linearities in wavelength scanning interferometry. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 31-39. ISBN 978-0-9566790-5-5

Mostafa, Alghadhi, Andrew, Ball, Laszlo, Kollar, Rakesh, Mishra and Taimoor, Asim (2015) Drive Cycle Optimisation for Pollution Reduction. International Journal of Environmental Science and Development, 6 (10). pp. 727-731. ISSN 2010-0264

Muhamedsalih, Yousif, Lucas, Gary and Meng, Yiqing (2015) A two-phase flowmeter for determining water and solids volumetric flow rates in stratified, inclined solids-in-water flows. Flow Measurement and Instrumentation, 45. pp. 207-217. ISSN 0955-5986

Nandy, Subhashis, Rehman, Atiq Ur, Jain, Anuj, Mishra, Rakesh and Tripathi, R.K. (2015) Flow Diagnostics in Centrifugal Pumps by Motor Current Signature Analysis. In: COMADEM 2015, 1st - 4th December 2015, Buenos Aires, Argentina. (Unpublished)

Panagiotopoulos, Andreas, Hothi, Harry, Whittaker, Robert, Matthies, Ashley K, Bills, Paul J., Racasan, Radu, Blunt, Liam, Skinner, John and Hart, A. J. (2015) Charactering taper junction wear helps understand the mechanism of failure of metal on metal hip replacements. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 24-28 2015, Las Vegas, NV, USA. (Submitted)

Panagiotopoulos, Andreas, Hothi, Harry, Whittaker, Robert, Meswania, Jay, Bills, Paul J., Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, A. J. (2015) Identifying The Pattern of Material Loss at the Head-Neck Junction Wear Helps Determine the Mechanism of Failure of Metal on Metal Total Hip Replacements. In: Orthopaedic Research Society Annual Meeting, March 28-31 2015, Las Vegas, NV, USA. (Submitted)

Papananias, M., Sztendel, S. and Pislaru, Crinela (2015) Development of a Novel MultiBody Mechatronic Model for Five-Axis CNC Machine Tool. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 379-389. ISBN 978-0-9566790-5-5

Park, Kyooseon, Asim, Taimoor and Mishra, Rakesh (2015) Numerical Investigations on the Effect of Blade Angles of a Vertical Axis Wind Turbine on its Performance Output. International Journal of COMADEM, 18 (3). pp. 3-10. ISSN 1363-7681

Parkinson, Simon, Crampton, Andrew and Longstaff, Andrew P. (2015) Optimising Measurement Processes Using Automated Planning. In: Advances in Mathematical and Computational Tools in Metrology and Testing. Series on Advances in Mathematics for Applied Sciences, 86 (X). World Scientific, Singapore, pp. 286-292. ISBN 978-981-4678-61-2

Parkinson, Simon and Longstaff, Andrew P. (2015) Multi-objective optimisation of machine tool error mapping using automated planning. Expert Systems With Applications, 42 (6). pp. 3005-3015. ISSN 0957-4174

Pawlak, W., Kubiak, Krzysztof, Wendler, B.G. and Mathia, T.G. (2015) Wear resistant multilayer nanocomposite WC1−x/C coating on Ti–6Al–4V titanium alloy. Tribology International, 82 (B). pp. 400-406. ISSN 0301-679X

Potdar, Akshay, Longstaff, Andrew P., Fletcher, Simon and Mian, Naeem S. (2015) Application of multi sensor data fusion based on Principal Component Analysis and Artificial Neural Network for machine tool thermal monitoring. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 228-237. ISBN 978-0-9566790-5-5

Qi, Qunfen, Li, Tukun, Scott, Paul J. and Jiang, Xiang (2015) A correlational study of areal surface texture parameters on some typical machined surfaces. Procedia CIRP, 27. pp. 149-154. ISSN 2212-8271

Qin, Yuchu, Lu, Wenlong, Qi, Qunfen, Liu, Xiaojun, Zhou, Liping and Li, Tukun (2015) Ontology-based semantic interpretation of cylindricity specification in the next-generation GPS. Procedia CIRP, 27. pp. 124-130. ISSN 2212-8271

Rehab, Ibrahim, Tian, Xiange, Ball, Andrew and Gu, Fengshou (2015) A Study of Diagnostic Signatures of a Deep Groove Ball Bearing Based on a Nonlinear Dynamic Mode. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). IEEE. ISBN 978-0-9926801-0-7

Rehman, Atiq Ur, Srivastava, Shivam, Jain, Anuj, Paul, Akshoy Ranjan and Mishra, Rakesh (2015) Effect of Blade Trailing Edge Angle on the Performance of a Centrifugal Pump Impeller. In: COMADEM 2015, 1st - 4th December 2015, Buenos Aires, Argentina. (Unpublished)

Ren, Hongyu, Gao, Feng and Jiang, Xiangqian (2015) Improvement of high-order least-squares integration method for stereo deflectometry. Applied Optics, 54 (34). pp. 10249-10255. ISSN 0003-6935

Retzer, Hermann, Stephenson, John, Mishra, Rakesh, Ball, Andrew and Schmidt, Karsten (2015) Brake tests to evaluate the human behaviour at different brake pedal characteristics. In: 28th International Congress of Condition Monitoring and Diagnostic Engineering Management and the 10th Regional Non-Destructive & Structural Testing Congress: COMADEM 2015 and X CORENDE, 1st-4th December 2015, Buenos Aires, Argentina. (Unpublished)

Sahboun, Salahaddin and Barrans, Simon (2015) Simulating Torsional Slip in V-band Clamp Joints. Applied Mechanics and Materials, 798. pp. 53-58. ISSN 1662-7482

Shaeboub, Abdulkarim, Abusaad, Samieh, Hu, Niaoqing, Gu, Fengshou and Ball, Andrew (2015) Detection and Diagnosis of Motor Stator Faults using Electric Signals from Variable Speed Drives. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). IEEE. ISBN 978-0-9926801-0-7

Shagluf, Abubaker, Longstaff, Andrew P. and Fletcher, Simon (2015) Derivation of a cost model to aid management of CNC machine tool accuracy maintenance. Journal of Machine Engineering, 15 (2). pp. 17-43. ISSN 1895-7595

Shagluf, Abubaker, Longstaff, Andrew P. and Fletcher, Simon (2015) A Preliminary Study of Applying Lean Six Sigma Methods to Machine Tool Measurement. In: Second International Conference on Sustainable Design and Manufacturing, 12th-14th April 2015, Seville, Spain.

Shebani, Amer and Pislaru, Crinela (2015) Wear Measuring and Wear Modelling Based on Archard, ASTM, and Neural Network Models. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 9 (1). pp. 177-182.

Smith, Ann, Gu, Fengshou and Ball, Andrew (2015) Selection of Input Parameters for Multivariate Classifiers in Proactive Machine Health Monitoring by Clustering Envelope Spectrum Harmonics. In: 6th International Conference on Mechanical and Aerospace Engineering, 16th - 17th July 2015, Rome, Italy.

Smith, Ann, Gu, Fengshou and Ball, Andrew (2015) "Selection of Input Parameters for Multivariate Classifiersin Proactive Machine Health Monitoring by Clustering Envelope Spectrum Harmonics". Applied Mechanics and Materials, 798. pp. 308-313. ISSN 1662-7482

Stetsyuk, V. and Crua, C. (2015) Optical diagnostic techniques for spray systems. In: Utilisation and valorisation of CO2 for green chemistry Chemical reactor, Optic methods and Catalyst, 19-20 February 2015, Saint-Etienne-du-Rouvray, France. (Submitted)

Sztendel, S., Papananias, M. and Pislaru, Crinela (2015) Improving the Dynamic Performance of Five-Axis CNC Machine Tool by using the Software-in-the-Loop (SIL) Platform. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 170-180. ISBN 978-0-9566790-5-5

Taimoor, Asim, Rakesh, Mishra, Matthew, Charlton and Carlos, Oliveira (2015) Capacity Testing and Local Flow Analysis of a Geometrically Complex Trim Installed within a Commercial Control Valve. In: The International Conference on Jets, Wakes and Separated Flows, 16-18 June 2015, Stockholm, Sweden. (Submitted)

Taylor, Andrew and Unver, Ertu (2015) 3D Printing our future: Now. In: 3M: IMI Workshop In collaboration With EOS, Renishaw & HK 3D Printing, 17th March 2015, 3M Buckley Innovation Centre. (Unpublished)

Thompson, Martin, Hunt, Ben, Smith, Alan M. and Joyce, Thomas (2015) Wear Tests of a Potential Biolubricant for Orthopedic Biopolymers. Lubricants, 3 (2). pp. 80-90. ISSN 2075-4442

Tian, Xiange, Abdallaa, Gaballa M., Rehab, Ibrahim, Gu, Fengshou and Ball, Andrew (2015) Diagnosis of Combination Faults in a Planetary Gearbox using a Modulation Signal Bispectrum based Sideband Estimator. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). IEEE. ISBN 978-0-9926801-0-7

Tian, Xiange, Gu, Fengshou, Rehab, Ibrahim, Abdalla, Gaballa and Ball, Andrew (2015) A robust fault detection method of rolling bearings using modulation signal bispectrum analysis. In: 28th International Congress of Condition Monitoring and Diagnostic Engineering Management (COMADEM 2015), 1st - 4th December 2015, Buenos Aires, Argentina.

To, Suet, Zhu, Zhiwei and Zeng, Wenhan (2015) Novel end-fly-cutting-servo system for deterministic generation of hierarchical micro–nanostructures. CIRP Annals - Manufacturing Technology, 64 (1). pp. 133-136. ISSN 0007-8506

Tong, Zhen and Luo, Xichun (2015) Investigation of focused ion beam induced damage in single crystal diamond tools. Applied Surface Science, 347. pp. 727-735. ISSN 0169-4332

Tong, Zhen, Luo, Xichun, Sun, Jining, Liang, Yingchun and Jiang, Xiangqian (2015) Investigation of a scale-up manufacturing approach for nanostructures by using a nanoscale multi-tip diamond tool. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Tong, Zhen, Xu, Zongwei, Wu, Wei and Luo, Xichun (2015) Molecular dynamic simulation of low-energy FIB irradiation induced damage in diamond. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 358. pp. 38-44. ISSN 0168-583X

Towsyfyan, Hossein, Wei, Nasha, Gu, Fengshou and Ball, Andrew (2015) Identification of lubrication Regimes in Mechanical Seals using Acoustic Emission for Condition Monitoring. In: The 54th Annual Conference ofThe British Institute of Non-Destructive Testing BINDT 2015, 8th - 10th September 2015, Telford, UK.

Unver, Ertu, Swann, David and Paxman, Richard (2015) Exhibition Narrative: Scalp Cooling Cap 2015 MedTech Exhibition,Ireland. [Show/Exhibition]

Walton, Karl, Blunt, Liam and Fleming, Leigh (2015) The topographic development and areal parametric characterization of a stratified surface polished by mass finishing. Surface Topography: Metrology and Properties, 3 (3). 035003. ISSN 2051-672X

Wang, Jian, Leach, R.K. and Jiang, Xiang (2015) Review of the mathematical foundations of data fusion techniques in surface metrology. Surface Topography: Metrology and Properties, 3 (2). ISSN 2051-672X

Wang, Xue, Xu, Qiang, Yu, Shu-min, Hu, Lei, Liu, Hong and Ren, Yao-yao (2015) Laves-phase evolution during aging in 9Cr-1.8W-0.5Mo-VNb steel for USC power plants. Materials Chemistry and Physics, 163. pp. 219-228. ISSN 0254-0584

Wang, Xue, Xu, Qiang, Yu, Shu-min, Liu, Hong, Hu, Lei and Ren, Yao-yao (2015) Laves-phase evolution during aging in fine grained heat-affected zone of a tungsten-strengthened 9% Cr steel weldment. Journal of Materials Processing Technology, 219. pp. 60-69. ISSN 0924-0136

Wei, Nasha, Gu, Fengshou, Wang, Tie, Li, Guoxing, Xu, Yuandong, Yang, Longjie and Ball, Andrew (2015) Characterisation of Acoustic Emissions for the Frictional Effect in Engines using Wavelets based Multi-resolution Analysis. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). IEEE. ISBN 978-0-9926801-0-7

Whittaker, Robert, Hothi, Harry, Meswania, Jay, Bills, Paul J., Racasan, Radu, Eskelinen, Antti, Blunn, Gordon, Skinner, John and Hart, A. J. (2015) 36mm Metal-on-Metal Hips have Similar Taper Material Loss Rates as Larger Diameter Hips from the Same Manufacturer. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 24-28 2015, Las Vegas, NV, USA. (Submitted)

Yang, Dingxin, Gu, Fengshou, Feng, Guojing, Yang, Yongmin and Ball, Andrew (2015) Achieving high bit rate logical stochastic resonance in a bistable system by adjusting parameters. Chinese Physics B, 24 (11). p. 110502. ISSN 1674-1056

Yang, H., Zhao, M., Gu, Z.L., Jin, L.W. and Chai, John (2015) A further discussion on the effective thermal conductivity of metal foam: An improved model. International Journal of Heat and Mass Transfer, 86. pp. 207-211. ISSN 0017-9310

Yang, Xin, Lu, Zhongyu and Xu, Qiang (2015) The Interpretation of Experimental Observation Data for the Development of Mechanisms based Creep Damage Constitutive Equations for High Chromium Steel. In: IEEE International Conference on Automation and Computing (ICAC 2015), 11th - 12th September 2015, Glasgow, Scotland.

Zhang, Guangde, Gao, Quanjie and Xu, Qiang (2015) Advances in Engineering Materials and Applied Mechanics: Proceedings of the International Conference on Machinery, Materials Science and Engineering Application, (MMSE 2015), Wuhan, China, June 27-28 2015. Taylor & Francis. ISBN 978-1-13-802834-0

Zhen, Dong, Shi, Zhanqun, Song, Zhongyue, Gu, Fengshou and Ball, Andrew (2015) Combustion Noise Analysis for Combustion and Fuels Diagnosis of a CI Diesel Engine Operating with Biodiesels. Combustion Science and Technology. p. 150707092649006. ISSN 0010-2202

Zhuang, Y., Goharzadeh, A., Yap, Y. F., Chai, John, Mathew, N., Lin, Y.J., Vargas, F. M. and Biswal, S. L. (2015) Experimental Investigation of Asphaltene Deposition in A Transparent Microchannel. In: Proceedings of the 1st Thermal and Fluid Engineering Summer Conference, August 9-12, 2015, New York, NY, USA.

2014

Abdalla, Gaballa, Tian, Xiange, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2014) Misalignment diagnosis of a planetary gearbox based on vibration analysis. In: 21st International Congress on Sound and Vibration, 13th - 17th July, 2014, Beijing, China.

Abdulshahed, Ali, Longstaff, Andrew P and Fletcher, Simon (2014) A novel approach for ANFIS modelling based on Grey system theory for thermal error compensation. In: 14th UK Workshop on Computational Intelligence. UKCI (2014). IEEE, Bradford, :UK. ISBN 978-1-4799-5538-1

Aburass, Ali, Yangchun, Guo, Tie, Wang, Fengshou, Gu, Ball, Andrew and Brown, D.R. (2014) Investigation of the Effect of Biodiesel Blends on Fuel Injection Pumps based on Vibration and Pressure Measurements. In: VETOMAC-X 2014, 9-11th September 2014, Manchester Conference Centre (Days Hotel), University of Manchester, UK. (Submitted)

Abusaad, Samieh, Benghozzi, Ahmed, Brethee, Khaldoon F., Gu, Fengshou and Ball, Andrew (2014) Investigating the Effect of Water Contamination on Gearbox Lubrication based on Motor Control Data from a Sensorless Drive. In: Proceedings of the 3rd international workshop and congress on eMaintenance: June 17-18 Luleå, Sweden : eMaintenance, Trends in technologies & methodologies, challenges, possibilites and applications. Luleå tekniska universite, Luleå, pp. 61-67. ISBN 978-91-7439-972-1

Achilleos, Paris (2014) Design optimisation of a diffuser for a turbocharger compressor stage. Masters thesis, University of Huddersfield.

Ahmaida, Anwar, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2014) Gear wear process monitoring using acoustic signals. In: 21st International Congress on Sound and Vibration, 13th - 17th July, 2014, Beijing, China.

Ahmed, M., Smith, Ann, Gu, Fengshou and Ball, Andrew (2014) Fault Diagnosis of Reciprocating Compressors Using Revelance Vector Machines with A Genetic Algorithm Based on Vibration Data. In: The 20th International Conference on Automation and Computing (ICAC'14), 12-13 September 2014, Cranfield University. (Unpublished)

Al-Obaidi, Ahmed, Pradhan, Suman, Asim, Taimoor, Mishra, Rakesh and Zala, Karina (2014) Numerical studies of the velocity distribution within the volute of a centrifugal pump. In: 27th International Congress of Condition Monitoring and Diagnostic Engineering Management, 16th - 18th September 2014, Brisbane, Australia. (Unpublished)

Albarzenji, Dlir, Pradhan, S. R., Mishra, R. and Zala, Karina (2014) Effect of a swirl on void fraction profiles in multiphase flows. In: Proceedings of 5th International and 41st National Conference on Fluid Mechanics and Fluid Power. Springer.

Alghadhi, Mostafa, Ball, Andrew, Kollar, Laszlo, Mishra, Rakesh and Asim, Taimoor (2014) Fuel Consumption Tabulation in Laboratory Conditions. In: International Research Conference on Engineering, Science and Management, 4-5 June 2014, Dubai.

Alghadhi, Mostafa, Ball, Andrew, Kollar, László E., Mishra, Rakesh and Asim, Taimoor (2014) Fuel Consumption Tabulation in Laboratory Conditions. International Journal of Recent Development in Engineering and Technology, 2 (4). pp. 29-38. ISSN 2347-6435

Argakiotis, C, Mishra, Rakesh, Stubbs, Christopher and Weston, Bill (2014) The Effect of using an Ethanol blended fuel on Emissions in an SI Engine. Renewable Energy and Power Quality Journal (12). ISSN 2172-038 X

Asim, Taimoor, Mishra, Rakesh, Kollar, László E. and Pradhan, Suman (2014) Optimal sizing and life-cycle cost modelling of pipelines transporting multi-sized solid-liquid mixtures. International Journal of Pressure Vessels and Piping, 113. pp. 40-48. ISSN 0308-0161

Barrans, Simon, Allport, John and Khodabakhshi, Goodarz (2014) Turbocharger Structural Integrity. Manufacturing and Industrial Engineering, 13 (3-4). ISSN 1335-7972

Barrans, Simon, Khodabakhshi, G. and Xu, Qiang (2014) Contact Pressure Distribution in Joints Formed by V-Band Clamps. Advanced Materials Research, 1016. pp. 34-38. ISSN 1662-8985

Barrans, Simon, Khodabakhshi, Goodarz and Muller, Matthias (2014) Classical and numerical approaches to determining V-section band clamp axial stiffness. Open Engineering, 5 (1). pp. 99-110. ISSN 2391-5439

Barrans, Simon and Radhi, H.E. (2014) Determining a Robust, Pareto Optimal Geometry for a Welded Joint. Advanced Materials Research, 1016. pp. 39-43. ISSN 1662-8985

Barrans, Simon, Waterworth, Adelle and Sahboun, Salahaddin (2014) Analysis of the Torsional Load Capacity of V-Section Band Clamps. Advanced Materials Research, 1016. pp. 59-64. ISSN 1662-8985

Bills, Paul J., Racasan, Radu, Tessier, P and Blunt, Liam (2014) Methods to assess material loss of the modular taper interface in retrieved hip replacements. In: Structures Surfaces in Engineering, Metrology and Healthcare, 30th September 2014, NPL, Teddington, London, UK. (Unpublished)

Borisov, Oleg, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2014) Performance evaluation of a new taut wire system for straightness measurement of machine tools. Precision Engineering, 38 (3). pp. 492-498. ISSN 0141-6359

Chen, Xiaomei, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2014) Deployment and evaluation of a dual-sensor autofocusing method for on-machine measurement of patterns of small holes on freeform surfaces. Applied Optics, 53 (10). pp. 2246-2255. ISSN 1559-128X

Deltombe, R., Kubiak, Krzysztof and Bigerelle, M. (2014) How to select the most relevant 3D roughness parameters of a surface. Scanning, 36 (1). pp. 150-160. ISSN 0161-0457

Ding, Hao, Scott, Paul J. and Jiang, Xiang (2014) A criterion for comparing measurement results and determining conformity with specifications. In: 13th CIRP Conference on Computer Aided Tolerancing, 11th-14th May 2014, Hangzhou, China. (Unpublished)

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh, Bird, David, Robbins, David and Sweeney, Francis (2014) Modelling water vapor permeability through atomic layer deposition coated photovoltaic barrier defects. Thin Solid Films, 570A. pp. 101-106. ISSN 00406090

Feng, Guojin, Tian, Xiange, Gu, James Xi, Yang, Dingxin, Gu, Fengshou and Ball, Andrew (2014) An adaptive envelope analysis in a wireless sensor network for bearing fault diagnosis using fast kurtogram algorithm. In: Comadem 2014, 16th - 18th September 2014, Brisbane, Australia.

Fletcher, Simon, Mian, N S and Longstaff, Andrew P. (2014) Optimising temperature sensor placement for machine tool thermal error compensation. In: EUSPEN Special Interest Group: Thermal Issues, 19-20 March 2014, Novotel Zurich City, Zurich, Switzerland. (Unpublished)

Ford, Derek G., Castaneda, Veimar Yobany Moreno, Longstaff, Andrew P., Pislaru, Crinela and Myers, Alan (2014) Computer numerical control vertical machining centre feed drive modelling using the transmission line technique. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science. pp. 1-22. ISSN 09544062

Ford, Derek G., Widiyarto, Muhammad Helmi Nur, Myers, Alan, Longstaff, Andrew P. and Fletcher, Simon (2014) Structural analysis and chracterisation technique applied to a CNC vertical machining centre. Journal of Mechanical Engineering Science. ISSN 0954-4062

Freegah, Basim, Asim, Taimoor, Albarzenji, Dlir, Pradhan, Suman and Mishra, Rakesh (2014) Effect of the shape of connecting pipes on the performance output of a closed-loop hot water solar Thermo-syphon. In: 3rd International Workshop and Congress on eMaintenance, 17th - 18th June 2014, Lulea, Sweden.

Gao, Quanjie, Xu, Qiang and Barrans, Simon (2014) Machinery, Materials Science and Engineering Applications 2014. Trans Tech Publications, pp. 46-51. ISBN 978-3-03835-113-9

Gilbert, J. M and Balouchi, Farouk (2014) A vibrating cantilever footfall energy harvesting device. Journal of Intelligent Material Systems and Structures, 25 (14). pp. 1738-1745. ISSN 1045-389X

Gilbert, J.M and Balouchi, F (2014) Design and optimisation of a footfall energy harvesting system. Journal of Intelligent Material Systems and Structures, 25 (14). pp. 1746-1756. ISSN 1045-389X

Goharzadeh, A., Yap, Y. F., Vargas, F.M., Biswal, S. L. and Chai, John (2014) Oil and Gas Industry Research: Some Challenges, Selected Current Research Activities and Sample Opportunities for Inter-Disciplinary Research. In: IHTS2014, International Heat Transfer Symposium, 6-9, May, 2014, Beijing, China.

Goharzadeh, A., Zhuang, Y., Yap, Y. F., Chai, John, Mathew, N., Vargas, F. M. and Biswal, S. L. (2014) Experimental investigation of Asphaltene deposition in a transparent mini-channel. In: HEFAT14, International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Jul. 14 – 16, 2014, Orlando, Fl, USA.

Groschl, Andreas, Akkasoglu, Gokhan, Loderer, Andreas, Plowucha, Wojciech, Werner, Teresa, Bills, Paul J. and Hausotte, Tino (2014) MUVOT - Establishing an International Vocational Training Program on the Topic of Measurement Uncertainty. In: 11th International Symposium on Measurement and Quality Control, 11-13 September 2013, Cracow-Kielce, Poland.

Gu, Fengshou, Abdalla, Gaballa M., Zhang, Riliang, Xun, Haijun and Ball, Andrew (2014) A Novel Method for the Fault Diagnosis of a Planetary Gearbox based on Residual Sidebands from Modulation Signal Bispectrum Analysis. In: Comadem 2014, 16th - 18th September 2014, Brisbane, Australia.

Gu, Fengshou, Tian, Xiange, Chen, Zhi, Rehab, Ibrahim and Ball, Andrew (2014) Fault severity diagnosis of rolling element bearings based on kurtogram and envelope analysis. International journal of structural analysis & design, 1 (2). ISSN 2372 - 4102

Gu, Fengshou, Tian, Xiange, Chen, Zhi, Wang, Tie, Rehab, Ibrahim and Ball, Andrew (2014) Fault severity diagnosis of rolling element bearings based on kurtogram and envelope analysis. In: Proceedings of the International conference on advances in civil, Structural and Mechanical Engineering. Institute of Research Engineers and Doctors. ISBN 978-981-07-8859-9

Hamed, M., Tesfa, Belachew, Fengshou, Gu and Ball, Andrew (2014) A study of the Suspension System for the Diagnosis of Dynamic Characteristics. In: Proceedings of the 20th International Conference on Automation and Computing (ICAC), 2014. ICAC (2014). IEEE, Cranfield, UK.

Hamomd, Osama, Tian, Xiange, Chen, Zhi, Abdulrahman, Albraik, Gu, Fengshou and Ball, Andrew (2014) A new method of vibration analysis for the diagnosis of impeller in a centrifugal pump. In: 21st International Congress on Sound and Vibration, 13th - 17th July, 2014, Beijing, China.

Hothi, H, Matthies, Ashley K, Berber, R, Whittaker, R, Bills, Paul J., Racasan, Radu, Blunt, Liam, Blunn, Gordon, Skinner, John and Hart, A. J. (2014) The reproducibility of a semi-quantitative scoring method for taper corrosion and fretting, and its usefulness for predicting the volume of material loss. In: Orthopaedic Research Society - 60th Annual Meeting, March 15-18 2014, New Orleans, LA, USA. (Unpublished)

Hothi, Harry, Bills, Paul J., Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, Alister J (2014) Bearing Surface Changes Of Retrieved MOM Hips Predict Factors Associated With Failure. In: 15th European Federation of National Associations of Orthopaedics and Traumatology (EFORT) Congress, 4-6 June 2014, London, UK. (Submitted)

Hubert, Cedric, Kubiak, Krzysztof, Bigerelle, Maxence and Dubar, Laurent (2014) Identification of Local Lubrication Regimes on Textured Surfaces by 3D Roughness Curvature Radius. Advanced Materials Research, 966-96. pp. 120-125. ISSN 1662-8985

Johnson, Anthony (2014) Sustainability - its incorporation into the mechanical engineering design process. Doctoral thesis, University of Huddersfield.

Kilcoyne, Susan H., Cywinski, R., Foard, Glenn, Gannon, Katy and Pirling, Thilo (2014) Strain analysis of 15th century guns and projectiles. [Dataset]

Kilcoyne, Susan H., Cywinski, R., Foard, Glenn, Gannon, Katy and Pirling, Thilo (2014) Strain analysis of 15th century roundshot. [Dataset]

Kilcoyne, Susan H., Gannon, Katy, Kiumars, Shoghi and Pirling, Thilo (2014) Measurement of residual stresses in the turbine housings of turbochargers. [Dataset]

Kubiak, Krzysztof, Bigerelle, M., Mathia, T. G., Dubois, A. and Dubar, L. (2014) Dynamic evolution of interface roughness during friction and wear processes. Scanning, 36 (1). pp. 30-38. ISSN 0161-0457

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2014) Rapid and accurate reverse engineering of geometry based on a multi-sensor system. International Journal of Advanced Manufacturing Technology, 74 (1-4). pp. 369-382. ISSN 0268-3768

Linares, J-M, Chaves-Jacob, J, Schwenke, H, Longstaff, Andrew P., Fletcher, Simon, Flore, J, Uhlmanne, E and Winteringe, J (2014) Impact of measurement procedure when error mapping and compensating a small CNC machine using a multilateration laser interferometer. Precision Engineering, 38 (3). pp. 578-588. ISSN 0141-6359

Liu, Xiaoyuan, Alfi, Stefano and Bruni, Stefano (2014) Condition monitoring of rail vehicle suspension based on recursive least-square algorithm. In: Proceedings of the 14th mini conference on vehicle system dynamics, identification and anomalies : VSDIA 2014. Budapest University of Technology and Economics, Budapest, pp. 47-54. ISBN 9789633131862

Liu, Xiaoyuan and Zhai, Wanming (2014) Analysis of vertical dynamic wheel/rail interaction caused by polygonal wheels on high-speed trains. Wear, 314 (1-2). pp. 282-290. ISSN 0043-1648

Longstaff, Andrew P., Fletcher, Simon, Parkinson, Simon and Myers, Alan (2014) The Role of Measurement and Modelling of Machine Tools in Improving Product Quality. International Journal of Metrology and Quality Engineering, 4 (03). pp. 177-184. ISSN 2107-6839

Lou, Shan, Jiang, Xiang, Zeng, Wenhan and Scott, Paul J. (2014) Slope transform: a theoretical insight into morphological operations in surface measurement. In: 13th CIRP Conference on Computer Aided Tolerancing, 11-14 May 2014, Hangzhou, China.

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2014) Morphological filters for functional assessment of roundness profiles. Measurement Science and Technology, 25 (6). 065005. ISSN 0957-0233

Lu, Wenlong, Zhang, Gengpei, Liu, Xiaojun, Zhou, Liping, Chen, Liangzhou and Jiang, Xiang (2014) Prediction of Surface Topography at the End of Sliding Running-In Wear Based on Areal Surface Parameters. Tribology Transactions, 57 (3). pp. 553-560. ISSN 1040-2004

Luo, X.L., Gu, Z.L., Chai, John, Meng, X.Z., Lu, Z. and Zhu, B.X. (2014) Investigation on Moisture and Salt Transport in Heterogeneous Porous Media of Relics-Soil in Archaeology Museum. In: ASME 2014 International Mechanical Engineering Congress and Exposition, November 14 – 20, 2014, Montreal, Canada.

Luo, Xichun, Tong, Zhen and Liang, Yingchun (2014) Investigation of the shape transferability of nanoscale multi-tip diamond tools in the diamond turning of nanostructures. Applied Surface Science, 321. pp. 495-502. ISSN 0169-4332

Malviya, Vihar and Mishra, Rakesh (2014) Development of an Analytical Multi-Variable Steady-State Vehicle Stability Model for Heavy Road Vehicles. Applied Mathematical Modelling, 38 (19-20). pp. 4756-4777. ISSN 0307-904X

Matthies, Ashley K, Bills, Paul J., Racasan, Radu, Blunt, Liam, Blunn, Gordon, Skinner, John and Hart, A. J. (2014) Analysis of the taper supports retention of a well-fixed stem in revision surgery of metal-on-metal hip replacements. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 11-15 2014, New Orleans, LA, USA. (Unpublished)

Matthies, Ashley K, Cro, Suzie, Bills, Paul J., Racasan, Radu, Blunt, Liam, Blunn, Gordon, Henckel, Johann, Skinner, John and Hart, A. J. (2014) Which factors determine the volume of material lost from the taper junction of metal-on-metal hip replacements? In: American Academy of Orthopaedic Surgeons Annual Meeting, March 11-15 2014, New Orleans, LA, USA. (Unpublished)

Meng, X.Z., Lu, Z., Su, L.J., Luo, X.L., Wei, L.C., Jin, L.W. and Chai, John (2014) Numerical and Experimental Investigation on Thermal Management of an Outdoor Battery Cabinet. In: ASME 2014 International Mechanical Engineering Congress and Exposition, November 14 – 20, 2014, Montreal, Canada.

Moamar, Hamed, Tesfa, Belachew, Fengshou, Gu and Ball, Andrew (2014) Vehicle Suspension Performance Analysis Based on Full Vehicle Model for Condition Monitoring Development. In: VETOMAC-X 2014, 9-11th September 2014, University of Manchester, UK. (Unpublished)

Parkinson, Simon (2014) Construction of Machine Tool Calibration Plans Using Domain-Independent Automated Planning. Doctoral thesis, University of Huddersfield.

Parkinson, Simon, Longstaff, Andrew P. and Fletcher, Simon (2014) Automated planning to minimise uncertainty of machine tool calibration. Engineering Applications of Artificial Intelligence, 30. pp. 63-72. ISSN 0952-1976

Pislaru, Crinela and Anyakwo, Arthur (2014) On Quasi-Newton Method Applied To 2D Wheel-Rail Contact Models. International Journal of Engineering Research & Technology, 3 (3). pp. 1962-1971. ISSN 2278-0181

Pislaru, Crinela and Sambo, Bello (2014) Condition-Based Monitoring of Wheel-Rail Interface Using a Novel Multibody Twin Disk Rig Model. In: 6th IET Conference on Railway Condition Monitoring. RCM 2014 . IET, Birmingham, UK, 4.2.3.. ISBN 978-1-84919-913-1

Plowucha, Wojciech, Jakubiec, Wladyslaw, Humienny, Zbigniew, Hausotte, Tino, Savio, Enrico, Dragomir, Mihai, Bills, Paul J., Marxer, Michael, Wisla, Norbert and Mathieu, Luc (2014) Geometrical Product Specification and Verification as toolbox to meet up-to-date technical requirements. In: The 11th International Scientific Conference “COORDINATE MEASURING TECHNIQUE” CMT 2014,, 2nd - 4th April 2014, Bielsko-Biala, Poland. (Unpublished)

Qi, Qunfen, Scott, Paul J., Jiang, Xiangqian and Lu, Wenlong (2014) Design and implementation of an integrated surface texture information system for design, manufacture and measurement. Computer Aided Design, 57. pp. 41-53. ISSN 0010-4485

Rajput, Nitul S., Tong, Zhen and Luo, Xichun (2014) Investigation of ion induced bending mechanism for nanostructures. Materials Research Express, 2 (1). ISSN 2053-1591

Ren, Hongyu, Jiang, Xiangqian, Gao, Feng and Zhang, Zonghua (2014) Absolute height measurement of specular surfaces with modified active fringe reflection photogrammetry. In: Proceedings of SPIE 9204, Interferometry XVII: Advanced Applications, 920408. SPIE, California, USA, 920408-1-920408-8.

Sabouri, A., Anthony, C. J., Bowen, J., Vishnyakov, Vladimir and Prewett, P. D. (2014) The effects of dwell time on focused ion beam machining of silicon. Microelectronic Engineering, 121. pp. 24-26. ISSN 0167-9317

Shagluf, Abubaker, Longstaff, Andrew P. and Fletcher, Simon (2014) Maintenance Strategies to Reduce Downtime Due to Machine Positional Errors. In: Proceedings of Maintenance Performance Measurement and Management. MPMM 2014 . Department of Mechanical Engineering Pólo II · FCTUC, Coimbra, Portugal, pp. 111-118. ISBN 978-972-8954-42-0

Shagluf, Abubaker, Parkinson, Simon, Longstaff, Andrew P. and Fletcher, Simon (2014) Towards an Optimization Calculation for Preventative and Reactive Calibration Strategies. In: SDM'2014 International Conference on Sustainable Design and Manufacturing Cardiff, Wales, UK 28-30 April 2014. Sustainable Design and Manufacturing 2014 . KES International, Cardiff, UK, pp. 83-94. ISBN 978-0-9561516-9-8

Shu, Wenting and Xu, Qiang (2014) Evaluation of a different stress state effect function of creep damage constitutive equations: 0.5Cr–0.5Mo–0.25V at 590oC. In: Advanced Materials Structures and Mechanical Engineering Conference, 9th -10th August 2014, Je-ju Island, Korea.

Sichani, Matin Sh., Enblom, Roger and Berg, Mats (2014) Comparison of non-elliptic contact models: Towards fast and accurate modelling of wheel-rail contact. Wear, 314 (1-2). pp. 111-117. ISSN 0043-1648

Sichani, Matin Sh., Enblom, Roger and Berg, Mats (2014) A fast non-elliptic contact model for application to rail vehicle dynamics simulation. Civil-Comp Proceedings, 104 (266). ISSN 1759-3433

Sichani, Matin Sh., Enblom, Roger and Berg, Mats (2014) A novel method to model wheel-rail normal contact in vehicle dynamics simulation. Vehicle System Dynamics, 52 (12). pp. 1752-1764. ISSN 0042-3114

Smith, Andrew S.J., Kaushal, Aniruddha, Odolinski, Kristofer, Iwnicki, Simon and Wheat, Phill (2014) Estimating the damage and marginal cost of different vehicle types on rail infrastructure: combining economic and engineering approaches. In: The Stephenson Conference: Research for Railways, 21-23 April 2015, London. (Unpublished)

Soltani, Mahdi, Pola, Annalisa and Xu, Qiang (2014) The effect of initial estimated points on objective functions for optimization. In: 28th European Conference on Modelling and Simulation, 27-30, May 2014, Brescia, Italy.

Tang, Dawei, Gao, F. and Jiang, Xiang (2014) White Light Channeled Spectrum Interferometry for the On-line Surface Inspection. In: The 3rd Annual EPSRC Manufacturing the Future Conference, 23 Sep-24 Sep 2014, Glasgow Science Centre, Glasgow, UK. (Unpublished)

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2014) Emission Characteristics of a CI Engine Running with a Range of Biodiesel Feedstocks. Energies, 7 (1). pp. 334-350. ISSN ISSN 1996-1073

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2014) NOx Emission Prediction Based on Measurement of in-Cylinder Pressure for CI Engine Running with Diesel and Biodiesel. International Journal of Automotive Engineering and Technologies, 3 (2). ISSN 2146-9067

Tian, Xiange, Feng, Guojin, Chen, Zhi, Albraik, Abdulrahman, Gu, Fengshou and Ball, Andrew (2014) The investigation of motor current signals from a centrifugal pump for fault diagnosis. In: Comadem 2014, 16th - 18th September 2014, Brisbane, Australia.

Tong, Zhen, Liang, Yingchun, Jiang, Xiang and Luo, Xichun (2014) An atomistic investigation on the mechanism of machining nanostructures when using single tip and multi-tip diamond tools. Applied Surface Science, 290. pp. 458-465. ISSN 0169-4332

Tong, Zhen, Liang, Yingchun, Yang, Xuechun and Luo, Xichun (2014) Investigation on the thermal effects during nanometric cutting process while using nanoscale diamond tools. International Journal of Advanced Manufacturing Technology, 74 (9-12). pp. 1709-1718. ISSN 0268-3768

Tong, Zhen, Luo, Xichun and Sun, Jining (2014) Investigation of a scale-up manufacturing approach for nanostructures using multi-tip nanoscale diamond tool. In: Proceedings of the 14 th international conference of the european society for precision engineering and nanotechnology. Euspen, pp. 347-350. ISBN 9780956679031

Towsyfyan, Hossein, Hassin, Osama, Gu, Fengshou and Ball, Andrew (2014) Characterization of Acoustic Emissions from Mechanical Seals for Fault Detection. In: The 53rd Annual Conference of The British Institute of Non-Destructive Testing September 2014 Manchester., 9-11 September 2014, The Palace Hotel, Manchester, UK.

Walker, Martyn (2014) Great stimulus to mechanical skill and inventiveness: The impact of the Great Exhibition of 1851 on the development of technical education during the second half of the nineteenth century, with particular reference to the Yorkshire Union Mechanics’ Institutes’. In: Research in Post-Compulsory Education Inaugural International Research Conference, 11 July – 13 July 2014, Harris Manchester College, Oxford, UK. (Unpublished)

Walton, Karl, Blunt, Liam, Fleming, Leigh, Goodhand, Martin and Lung, Hang (2014) Areal parametric characterisation of ex-service compressor blade leading edges. Wear, 321. pp. 79-86. ISSN 0043-1648

Walton, Karl, Blunt, Liam, Fleming, Leigh, Goodhand, Martin and Lung, Hang (2014) A real parametric characterisation of ex-service compressor blade leading edges. Wear, 321. pp. 79-86. ISSN 00431648

Wang, Ruichen, Chen, Zhi, Xun, Haijun, Schmidt, Karsten, Gu, Fengshou and Ball, Andrew (2014) Modelling and Validation of a Regenerative Shock Absorber System. In: The 20th International Conference on Automation and Computing (ICAC'14), 12-13 September 2014, Cranfield University Bedfordshire MK43 0AL UK. (Unpublished)

Wei, Chongfeng and Olatunbosun, Oluremi Ayotunde (2014) Transient dynamic behaviour of finite element tire traversing obstacles with different heights. Journal of Terramechanics, 56. pp. 1-16. ISSN 00224898

Wei, Nasha, Gu, Fengshou, Li, Guoxing, Wang, Tie and Ball, Andrew (2014) Characterising the friction and wear between the piston ring and cylinder liner based on acoustic emission analysis. In: 21st International Congress on Sound and Vibration, 13th - 17th July, 2014, Beijing, China.

Whittaker, R, Hexter, A, Hothi, H, Panagiotidou, A, Bills, Paul J., Skinner, John and Hart, A. J. (2014) Component Size Mismatch of Metal on Metal Hip Arthroplasty: An Avoidable Never Event. Journal of Arthroplasty, 29 (8). pp. 1629-1634. ISSN 0883-5403

Whittaker, Robert, Hothi, Harry, Hexter, Adam, Henckel, Johann, Panagiotidou, Anna, Bills, Paul J., Blunn, Gordon, Skinner, John and Hart, Alister (2014) Component Size Mismatch Of Metal On Metal Hip Arthroplasty: An Avoidable Never Event. In: 15th European Federation of National Associations of Orthopaedics and Traumatology (EFORT) Congress, 4-6 June 2014, London, UK. (Submitted)

Williamson, James, Martin, Haydn and Jiang, Xiang (2014) Phase Calculation of Spectral Interferograms using Template Matching. In: Manufacturing the Future Conference 2014, 23rd – 24th September 2014, University of Strathclyde. (Unpublished)

Xu, Qiang, Lu, Zhongyu and Wang, Xue (2014) Damage Modelling: the current state and the latest progress on the development of creep damage constitutive equations for high Cr steels. In: MMSE2014 4th International Conference on machinery, materials science and engineering applications, 28-29, June, 2014, Wuhan, China.

Yang, Xin, Xu, Qiang, Lu, Zhongyu and Barrans, Simon (2014) Preliminary Review of the Influence of Cavitation Behavior in Creep Damage Constitutive Equations. In: Machinery, Materials Science and Engineering Applications 2014. Trans Tech Publications, pp. 46-51. ISBN 978-3-03835-113-9

Yap, Y. F., Yali, Zhang, Wong, Teck Neng, Nguyen, Nam-Trung and Chai, John (2014) Flow Bifurcation in Microchannel. In: Encyclopedia of Microfluidics and Nanofluidics. Springer New York, pp. 1120-1131. ISBN 978-3-642-27758-0

Zeng, Shengyue and Blunt, Liam (2014) Experimental investigation and analytical modelling of the effects of process parameters on material removal rate for bonnet polishing of cobalt chrome alloy. Precision Engineering, 38 (2). pp. 348-355. ISSN 01416359

2013

Abobghala, Abdelmenem, Pislaru, Crinela and Iwnicki, S. (2013) Optimising the energy efficiency of rail vehicles by a novel application of integrated active control method for vehicle traction and steering systems. In: Next Generation Rail 2013, 15 - 16 July 2013, The Crystal, London.

Abuhabaya, Abdullah, Fieldhouse, John D. and Brown, David .R. (2013) The optimization of biodiesel production by using response surface methodology and its effect on compression ignition engine. Fuel Processing Technology, 113. pp. 57-62. ISSN 0378-3820

Aburass, Ali, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) Combustion Diagnostics of a Diesel Engine with Biodiesel Fuels based on Vibro-acoustics and In-Cylinder Pressure Measurements. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 13-18. ISBN 9781862181212

Abusaad, Samieh, Benghozzi, Ahmed, Gu, Fengshou and Ball, Andrew (2013) Utilizing Data from a Sensorless AC Variable Speed Drive for Detecting Mechanical Misalignments. In: Damage Assessment of Structures. DAMAS 2013, X . Trans Tech Publications Ltd., Dublin, Ireland, pp. 465-472. ISBN 978-3-03785-796-0

Abusaad, Samieh, Benghozzi, Ahmed, Shao, Yimin, Gu, Fengshou and Ball, Andrew (2013) Utilizing Data from a Sensorless AC Variable Speed Drive for Detecting Mechanical Misalignments. Key Engineering Materials, 569. pp. 465-472. ISSN 1013-9826

Al-Hamad, Salah Madhi Ahmad (2013) Blended Learning System for Further and Higher Education Mechanical Engineering Courses in Bahrain. Doctoral thesis, University of Huddersfield.

Alwodai, Ahmed, Wang, Tie, Chen, Zhi, Gu, Fengshou, Cattley, Robert and Ball, Andrew (2013) A Study of Motor Bearing Fault Diagnosis using Modulation Signal Bispectrum Analysis of Motor Current Signals. Journal of Signal and Information Processing, 4 (3B). pp. 132-137. ISSN 2159-4481

An, Lili, Xu, Qiang and Lu, Zhongyu (2013) The development of advanced creep constitutive equations for high chromium steel P91 at low stress range. In: 6th International “HIDA” Conference on Life/Defect Assessment & Failures in High Temperature Plant, 2-4 December 2013, Japan.

An, Lili, Xu, Qiang, Lu, Zhongyu and Xu, Donglai (2013) Analyzing the characteristics of the cavity nucleation, growth and coalescence mechanism of 9Cr-1Mo-VNb steel (P91) steel. Advanced Materials Research, 744. pp. 412-416. ISSN 1662-8985

An, Lili, Xu, Qiang, Xu, Donglai and Lu, Zhongyu (2013) Review of creep deformation and rupture mechanism of P91 alloy for the development of creep damage constitutive equations under low stress level. In: Proceedings of the 2013 World Congress in Computer Science and Computer Engineering and Application. CSREA Press, pp. 184-187. ISBN 1-60132-238-0

Andrade, António Ramos and Teixeira, P. F. (2013) Hierarchical Bayesian modelling of rail track geometry degradation. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 227 (4). pp. 364-375. ISSN 0954-4097

Ashraf, Naveed (2013) An Investigation into the Influence of the Contact Pressure Distribution at the Friction Pair Interface on Disc Brake Squeal. Doctoral thesis, University of Hudderfield.

Asim, Taimoor, Mishra, Rakesh, Paris, Achilleos and Zala, Karina (2013) Optimal Design Methodology for On-shore Hydraulic Pipelines Transporting Spherical Capsules. Procedia CIRP: TESC 2013 - 2nd International Through-life Engineering Services Conference, 11. pp. 305-310. ISSN 2212 - 8271

Asim, Taimoor, Mishra, Rakesh and Ubbi, Kuldip (2013) Effect of the Shape of Stator Blades on the Performance Output of a Vertical Axis Marine Current Turbine. In: 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, 11-13 June 2013, Helsinki, Finland. (Submitted)

Asim, Taimoor, Mishra, Rakesh, Ubbi, Kuldip and Zala, Karina (2013) Computational Fluid Dynamics Based Optimal Design of Vertical Axis Marine Current Turbines. Procedia CIRP: TESC 2013 - 2nd International Through-life Engineering Services Conference, 11. pp. 323-327. ISSN 2212 - 8271

Asim, Taimoor, Sendanayake, Isuru, Mishra, Rakesh, Zala, Karina and Ubbi, Kuldip (2013) Effects of a Moving Surface Boundary Layer Control Device (MSBC) on the Drag Reduction in Heavy Commercial Vehicles. In: 40th National Conference on Fluid Mechanics & Fluid Power FMFP 2013, 12-14 December 2013, NIT Hamirpur, Himachal Pradesh, India.

Asim, Taimoor, Sendanayake, Isuru and Mishra, Shashwat (2013) Numerical Analysis of Atherosclerosis and Aneurysm in Carotid Bifurcations using Computational Fluid Dynamics. In: 40th National Conference on Fluid Mechanics & Fluid Power FMFP 2013, 12-14 December 2013, NIT Hamirpur, Himachal Pradesh, India.

Baqqar, Mabrouka, Tran, Van Tung, Gu, Fengshou and Ball, Andrew (2013) Gearbox fault detection using static data and adaptive neurofuzzy inference system. In: COMADEM 2013, 11th-13th June /2013, Helsinki, Finland.

Bigerelle, M., Nianga, J.M., Najjar, D., Iost, A., Hubert, C. and Kubiak, Krzysztof (2013) Roughness Signature of Tribological Contact Calculated by a New Method of Peaks Curvature Radius Estimation on Fractal Surfaces. Tribology International, 65. pp. 235-247. ISSN 0301-679X

Bills, Paul J., Racasan, Radu, Tessier, P and Blunt, Liam (2013) Assessing the wear of the modular taper interface in retrieved metal-on-metal hip replacements. In: 14th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2013), June 17-21, 2013, Taipei, Taiwan. (Unpublished)

Blunt, Liam, Fleming, Leigh, Elrawemi, Mohamed, Robbins, David and Muhamedsalih, Hussam (2013) In-line metrology of functional surfaces with a focus on defect assessment on large area Roll to Roll substrates. In: Proceedings of the 13th international conference of the european society for precision engineering and nanotechnology. EUSPEN, Germany, Berlin, pp. 71-74. ISBN 13:978-0-9566790-2-4

Borisov, Oleg, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) New low cost sensing head and taut wire method for automated straightness measurement of machine tool axes. Optics and lasers in engineering, 51 (8). pp. 978-985. ISSN 0143-8166

Castrejon-Pita, J. R., Kubiak, Krzysztof, Castrejon-Pita, A. A., Wilson, M. C. T. and Hutchings, I. M. (2013) Mixing and internal dynamics of droplets impacting and coalescing on a solid surface. Physical Review B, 88. 023023. ISSN 1098-0121

Chen, Xiaomei, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Evaluation of measurement technique for a precision aspheric artefact using a nano-measuring machine. In: Laser Metrology and Machine Performance X. Euspen, Euspen Headquarters, Bedfordshire, MK43 0AL, UK, pp. 357-364. ISBN 978-0-9566790-1-7

Cui, C.uk, Li, T., Blunt, L.A., Jiang, X., Huang, H., Ye, R. and Fan, W. (2013) The Assessment of Straightness and Flatness Errors Using Particle Swarm Optimization. Procedia CIRP, 10. pp. 271-275. ISSN 2212-8271

Ding, Hao, Scott, J. Paul and Jiang, Xiang (2013) Relational Structure of Measurement with Application on Specification of Freeform Surface. In: Proceedings of the The 11th International Symposium on Measurement Technology and Intelligent Instruments. ISMTII 2013 . Apprimus Wissenschaftsver, Aachen and Braunschweig, Germany. ISBN 978-3-86359-138-0

Elbarghathi, Fathalla, Tian, Xiange, Tung Tran, Van, Gu, Fengshou and Ball, Andrew (2013) Multi-stages helical gearbox fault detection using vibration signal and Morlet wavelet transform adapted by information entropy difference. In: COMADEM 2013, 11-13 June 2013, Helsinki, Finland. (Submitted)

Elrawemi, Mohamed, Blunt, Liam and Fleming, Leigh (2013) Metrology and Characterisation of Micro and Nano-scale Defects for Aluminium Oxide Barrier Film Employed in Flexible Photovoltaic Modules. In: Manufacturing the Future Conference September 2013. UKMTFC 2013 . EPSRC, Cranfield, UK. ISBN 978-1-907413-22-3

Elsayed, A., Al-Dadah, R.K., Mahmoud, S., Shi, B. and Rezk, Ahmed (2013) Adsorption low temperature cooling using activated carbon / ethanol working pairs. In: The 5th International Conference on Applied Energy ICAE 2013, 1st-4th July 2013, Pretoria, South Africa. (Unpublished)

Elsayed, Ahmed, Embaye, Mebrahtu, AL-Dadah, Raya, Mahmoud, Saad and Rezk, Ahmed (2013) Thermodynamic performance of Kalina cycle system 11 (KCS11): feasibility of using alternative zeotropic mixtures. International Journal of Low-Carbon Technologies, 8 (S1). i69-i78. ISSN 1748-1317

Feng, Guojin, Zhen, Dong, Aliwan, M., Gu, Fengshou and Ball, Andrew (2013) Investigation of Wireless Protocols for Remote Condition Monitoring. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 19-24. ISBN 9781862181212

Fleming, Leigh, Blunt, Liam, Robbins, David and Elrawemi, Mohamed (2013) Characterisation techniques to assess functional properties of barrier coatings for flexible PV substrates. In: Proceedings of Laser Metrology and Performance X 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. LAMDAMAP 2013 . EUSPEN, Buckinghamshire, UK, pp. 59-69. ISBN 978-0-9566790-1-7

Fleming, Leigh, Racasan, Radu, Bills, Paul J., Skinner, John, Hart, Alister J and Blunt, Liam (2013) Characterisation of wear morphology at the head-cup bearing interface in retrieved metal-on-metal hip replacements. In: International Society for Technology in Arthroplasty 26th Annual Congress, 16-19 October 2013, Palm Beach, Florida, USA. (Unpublished)

Ford, Derek G., Myers, Alan, Haase, Frerk, Lockwood, Stephen and Longstaff, Andrew P. (2013) Active Vibration Control for a CNC Milling Machine. Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science. ISSN 0954-4062

Freegah, Basim, Asim, Taimoor and Mishra, Rakesh (2013) Computational Fluid Dynamics based Analysis of a Closed Thermo-Siphon Hot Water Solar System. In: 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, 11-13 June 2013, Helsinki, Finland. (Unpublished)

Freegah, Basim, Asim, Taimoor and Mishra, Rakesh (2013) Numerical Analysis of a Closed Thermo-syphon Hot Water Solar System under Steady and Transient Loading Conditions. In: 40th National Conference on Fluid Mechanics & Fluid Power FMFP 2013, 12-14 December 2013, NIT Hamirpur, Himachal Pradesh, India.

Ge, Q., Yap, Y. F., Vargas, F. M., Zhang, M. and Chai, John (2013) Numerical modeling of asphaltene deposition. Computational Thermal Sciences, 5 (2). pp. 153-163. ISSN 1940-2503

Ge, Q., Yap, Y.F., Zhang, M. and Chai, John (2013) Modeling anisotropic diffusion using a departure from isotropy approach. Computers & Fluids, 86. pp. 298-309. ISSN 00457930

Goel, Saurav, Luo, Xichun, Comley, Paul, Reuben, Robert L and Cox, Andrew (2013) Brittle–ductile transition during diamond turning of single crystal silicon carbide. International Journal of Machine Tools and Manufacture, 65. pp. 15-21. ISSN 08906955

Goel, Saurav, Luo, Xichun and Reuben, Robert L. (2013) Wear mechanism of diamond tools against single crystal silicon in single point diamond turning process. Tribology International, 57. pp. 272-281. ISSN 0301679X

Grossoni, Ilaria, Iwnicki, Simon, Bezin, Yann and Gong, Cencen (2013) Dynamic response of vehicle-track coupling system with an insulated rail joint. In: 11th International Conference on Vibration Problems, 9-12 September 2013, Lisbon (Portugal).

Hamed, M., Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2013) A study of the influence of vehicle tyre pressure on suspension system response using a full car model. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 7-12. ISBN 9781862181212

Hart, A. J., Matthies, Ashley K, Racasan, Radu, Bills, Paul J., Panagiotidou, A, Blunt, Liam, Blunn, Gordon and Skinner, John (2013) Taper wear contributes only a third of the total volumetric material loss in large head metal on metal hip replacement. Bone and joint journal: Orthopaedic Proceedings, 95-B (Sup 13). p. 14. ISSN 1358-992X

He, Xiao Cong, Zhen, Dong, Xing, Bao Ying, Zeng, Kai, Ding, Yan Fang, Gu, Fengshou and Ball, Andrew (2013) Free Vibration Measurements of Single-Lap Cantilevered SPR Beams. Applied Mechanics and Materials, 321-32. pp. 33-36. ISSN 1662-7482

He, Xiaocong, Baoying, Xing1, Kai, Zeng, Gu, Fengshou and Ball, Andrew (2013) Numerical and experimental investigations of self-piercing riveting. International Journal of Advanced Manufacturing Technology, 69 (1-4). pp. 715-721. ISSN 0268-3768

He, Xiaocong, Gu, Fengshou and Ball, Andrew (2013) Fatigue Behaviour of Fastening Joints of Sheet Materials and Finite Element Analysis. Advances in Mechanical Engineering, 2013. pp. 1-9. ISSN 1687-8132

Hexter, A., Matthies, Ashley K., Bills, Paul J., Skinner, John and Hart, A.J. (2013) Volumetric material loss in metal-on-metal total hip arthroplasty: Bearing surface wear versus taper corrosion. British Journal of Surgery, 100 (s4). p. 42. ISSN 0007-1323

Hothi, H, Cro, Suzie, Bills, Paul J., Blunt, Liam, Racasan, Radu, Blunn, Gordon, Skinner, J. and Hart, Alister J (2013) Correlation between the detailed visual inspection of retrieved metal-on-metal hips and their volumetric wear. In: International Society for Technology in Arthroplasty 26th Annual Congress, 16-19 October 2013, Palm Beach, Florida, USA. (Unpublished)

Hothi, H, Matthies, Ashley K, Berber, R, Whittaker, R, Bills, Paul J., Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, A. J. (2013) The reliability of a semi-quantitative scoring method for taper corrosion and fretting, and its usefulness for predicting the volume of material loss. In: International Society for Technology in Arthroplasty 26th Annual Congress, 16-19 October 2013, Palm Beach, Florida, USA.

Hothi, Harry, Cro, Suzie, Bills, Paul J., Blunt, Liam, Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, A. J. (2013) Correlation Between the Detailed Visual Inspection of Retrieved Metal-on-Metal Hips and Their Volumetric Wear. Bone and joint journal: Orthopaedic Proceedings, 95-B (Sup 34). p. 78. ISSN 1358-992X

Jiang, Xiang (2013) Editorial: Special issue on geometrical products design and their metrology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (5). p. 633. ISSN 0954-4054

Jiang, Xiangqian, Abdul-Rahman, Hussein S. and Scott, Paul J. (2013) Multi-scale freeform surface texture filtering using a mesh relaxation scheme. Measurement Science and Technology, 24 (11). ISSN 0957-0233

Jupp, Martyn, Campean, I.F and Travcenko, J (2013) Application of TRIZ to develop an in-service diagnostic system for a synchronous belt transmission for automotive application. Procedia CIRP, 11. pp. 114-119. ISSN 2212-8271

Kollar, László E., Mishra, Rakesh and Asim, Taimoor (2013) Particle size effects on optimal sizing and lifetime of pipelines transporting multi-sized solid-liquid mixtures. Procedia CIRP: TESC 2013 - 2nd International Through-life Engineering Services Conference, 11. pp. 317-322. ISSN 2212 - 8271

Kus, Abdil, Unver, Ertu, Jagger, Brian and Durgun, Ismail (2013) A Study of Injection Moulding with Bismuth Alloy. In: Green Design, Materials and Manufacturing Processes. Taylor & Francis, pp. 225-232. ISBN 9781138000469

Lapa, Raymond (2013) Remote machine condition monitoring based on power supply measurements. Masters thesis, University of Huddersfield.

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Integrated Tactile-Optical Coordinate System for the Reverse Engineering of Complex Geometry. In: Proceedings of the 37th International MATADOR Conference. Springer, pp. 41-44. ISBN 9781447144793

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Multiple-sensor integration for efficient reverse engineering of geometry. Proceedings of the 11th International Conference on Manufacturing Research. pp. 319-324. ISSN 978-1-907413-23-0

Li, Tukun, Blunt, Liam A., Jiang, Xiangqian and Zeng, Wenhan (2013) An Information Model for Surface Metrology. Procedia CIRP, 10. pp. 251-258. ISSN 2212-8271

Liang, Bo, Iwnicki, S. and Zhao, Y. (2013) Application of Power Spectrum, Cepstrum, Higher Order Spectrum and Neural Network Analyses for Induction Motor Fault Diagnosis. Mechanical Systems and Signal Processing, 39 (1-2). pp. 342-360. ISSN 0888-3270

Liang, Bo, Iwnicki, Simon, Zhao, Yunshi and Crosbee, David (2013) Railway wheel-flat and rail surface defect modelling and analysis by time–frequency techniques. Vehicle System Dynamics, 51 (9). pp. 1403-1421. ISSN 0042-3114

Liu, Dezheng, Xu, Qiang and Lu, Zhongyu (2013) Research in the development of finite element software for creep damage analysis. Journal of communication and computer, 2013 (10). pp. 1019-1030. ISSN 1548-7709

Liu, Dezheng, Xu, Qiang, Lu, Zhongyu, Xu, Dong Lai and Tan, Feng (2013) The Development of Finite Element Analysis Software for Creep Damage Analysis. In: Proceedings of the 2013 World Congress in Computer Science and Computer Engineering and Application. CSREA Press. ISBN 1-60132-238-0

Liu, Xiaoyuan, Zhai, Wanming and Bruni, Stefano (2013) Analysis of dynamic wheel/rail interaction caused by measured out-of-round railway wheels. In: 23rd International Symposium on Dynamics of Vehicles on Road and Tracks (IAVSD), 19th-23rd August 2013, Qingdao, China. (Unpublished)

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2013) Applications of Morphological Operations in Surface Metrology and Dimensional Metrology. In: 14th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2013), 17th - 21st June 2013, Taipei, Taiwan.

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2013) Geometric computation theory for morphological filtering on freeform surfaces. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 469 (2159). p. 20130150. ISSN 1364-5021

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2013) Identifying and Characterizing Micro-machining Signatures on Freeform Surfaces Using Morphological Methods. In: Manufacturing the future conference 2013, 17-18 September 2013, Cranfield University, UK. (Unpublished)

Lou, Shan, Jiang, Xiangqian, Bills, Paul J. and Scott, Paul J. (2013) Defining True Tribological Contact Through Application of the Morphological Method to Surface Topography. Tribology Letters, 50 (2). pp. 185-193. ISSN 1023-8883

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) Application of the morphological alpha shape method to the extraction of topographical features from engineering surfaces. Measurement, 46 (2). pp. 1002-1008. ISSN 0263-2241

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) Correlating motif analysis and morphological filters for surface texture analysis. Measurement, 46 (2). pp. 993-1001. ISSN 0263-2241

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) An Efficient Divide-and-Conquer Algorithm for Morphological Filters. Procedia Engineering: 12th CIRP Conference on Computer Aided Tolerancing, 10. pp. 142-147. ISSN 1877-7058

Lou, Shan, Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2013) Robust Filtration Techniques in Geometrical Metrology and Their Comparison. International Journal of Automation and Computing, 10 (1). pp. 1-8. ISSN 1476-8186

Martin, Haydn and Jiang, Xiangqian (2013) Dispersed reference interferometry. CIRP Annals - Manufacturing Technology, 62 (1). pp. 551-554. ISSN 0007-8506

Matthies, Ashley K, Racasan, Radu, Bills, Paul J., Panagiotidou, A, Skinner, John, Blunn, Gordon and Hart, A. J. (2013) Corrosion is the main mechanism of material loss at the taper junction of large head metal on metal hip replacements. Bone and joint journal: Orthopaedic Proceedings, 95-B (Sup 13). p. 13. ISSN 1358-992X

McHugh, M, Bills, Paul J. and Vanin, Stefano (2013) PMI estimation in submerged bones: a new strategy. In: International Conference on Forensic Sciences, 8th-9th July 2013, London. (Unpublished)

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) Efficient estimation by FEA of machine tool distortion due to environmental temperature perturbations. Precision Engineering, 37 (2). pp. 372-379. ISSN 0141-6359

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) Towards obtaining robust boundary condition parameters to aid accuracy in FEA thermal error predictions. In: 2nd Annual EPSRC Manufacturing the Future Conference, 17-18 September 2013, Cranfield University, UK.

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) The significance of air pockets for modelling thermal errors of machine tools. In: Laser Metrology and Machine Performance X. Lamdamap 2013 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, 10 . EUSPEN, Bedfordshire, UK, pp. 189-198. ISBN 978-0-9566790-1-7

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2013) Accelerated surface measurement using wavelength scanning interferometer with compensation of environmental noise. Procedia Engineering: 12th CIRP Conference on Computer Aided Tolerancing, 10. pp. 70-76. ISSN 1877-7058

Papavasileiou, Vicky, Flouris, Giorgos, Fundulaki, Irini, Kotzinos, Dimitris and Christophides, Vassilis (2013) High-level change detection in RDF(S) KBs. ACM Transactions on Database Systems, 38 (1). pp. 1-42. ISSN 0362-5915

Park, Kyooseon, Asim, Taimoor and Mishra, Rakesh (2013) Effect of Blade Faults on the Performance Characteristics of a Vertical Axis Wind Turbine. In: 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, 11-13 June 2013, Helsinki, Finland. (Submitted)

Pislaru, Crinela (2013) A Review on Real-Time Simulation of CNC Machine Tool Dynamics. International Journal of Mechanical Engineering, 2 (5). pp. 39-44. ISSN 2319-2240

Potdar, Akshay, Longstaff, Andrew P., Fletcher, Simon and Abdulshahed, Ali (2013) Development of modular machine tool structural monitoring system. In: Proceedings of the International Conference on Advanced Manufacturing Engineering and Technologies. KTH Royal Institute of Technology, Stockholm, pp. 263-272. ISBN 978-91-7501-892-8

Pradhan, Suman, Mishra, Rakesh, Ubbi, Kuldip and Asim, Taimoor (2013) Optimal design of a four-sensor probe system to measure the flow properties of the dispersed phase in bubbly air-water multiphase flows. Sensors and Actuators A: Physical, 201. pp. 10-22. ISSN 0924-4247

Qi, Qufen, Scott, Paul J., Jiang, Xiang, Lu, Wenlong and Ding, Hao (2013) The Discussion of Uncertainties in Surface Texture during Design, Manufacture and Measurement. In: The 11th International Symposium of Measurement Technology and Intelligent Instruments, 1st-5th July 2013, RWTH, Aachen, Germany.

Qi, Qunfen, Jiang, Xiang and Scott, Paul J. (2013) A Knowledge Platform for Surface Texture in Advanced Manufacturing. In: Manufacturing the Future Conference. Abstracts from the 2nd Annual EPSRC . EPSRC, Cranfield, UK, p. 60. ISBN 978-1-907413-22-3

Racasan, Radu, Bills, Paul J., Blunt, Liam and Xiao, Shaojun (2013) Measurement of material loss. In: Are Modular Hip Junctions An Issue?, 29th April 2013, The Royal Society of Medicine, London. (Submitted)

Racasan, Radu, Fleming, Leigh, Bills, Paul J., Skinner, John, Hart, A. J. and Blunt, Liam (2013) Characterisation of Wear Morphology at the Head Cup Bearing Interface in Retrieved Metal-on-Metal Hip Replacements. Bone and joint journal: Orthopaedic Proceedings, 95-B (Sup 34). p. 488. ISSN 1358-992X

Rezk, Ahmed, AL-Dadah, Raya, Mahmoud, Saad and Elsayed, Ahmed (2013) Investigation of Ethanol/metal organic frameworks for low temperature adsorption cooling applications. Applied Energy, 112. pp. 1025-1031. ISSN 0306-2619

Rezk, Ahmed, Al-Dadah, R., Mahmoud, S. and Elsayed, A. (2013) Experimental investigation of metal organic frameworks characteristics for water adsorption chillers. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 227 (5). pp. 992-1005. ISSN 0954-4062

Rezk, Ahmed, Al-Dadah, R.K., Mahmoud, S. and Elsayed, A. (2013) Effects of contact resistance and metal additives in finned-tube adsorbent beds on the performance of silica gel/water adsorption chiller. Applied Thermal Engineering, 53 (2). pp. 278-284. ISSN 1359-4311

Rubio Rodriguez, Luis, De la Sen Parte, Manuel, Longstaff, Andrew P. and Fletcher, Simon (2013) Model-based Expert System to Automatically Adapt Milling Forces in Pareto Optimal Multi-Objective Working Points. Expert Systems With Applications, 40 (6). pp. 2312-2322. ISSN 0957-4174

Rubio Rodriguez, Luis, De la Sen Parte, Manuel, Longstaff, Andrew P. and Myers, Alan (2013) Analysis of discrete time schemes for milling forces control under fractional order holds. International Journal of Precision Engineering and Manufacturing, 14 (5). pp. 735-744. ISSN 2234-7593

Rubio Rodriguez, Luis, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Towards self-optimizing and self-adaptive milling processes. In: Lamdamap 10th International Conference, 20th-21st March 2013, Chicheley Hall Chicheley, Chester, England. (Unpublished)

Shackleton, Philip, Stow, Julian, Eickhoff, Bridget and Osman, Martin (2013) Reducing the Diameter of Freight Vehicle Wheels – The Suitability of Q/D as a Control for Wheel-Rail Contact Stress. In: World Congress on Railway Research, 25th - 28th November 2013, Sydney, Australia.

Shagluf, Abubaker, Longstaff, Andrew P., Fletcher, Simon and Denton, Paul (2013) Towards a Downtime Cost Function to Optimise Machine Tool Calibration Schedules. In: Proceedings of the International Conference on Advanced Manufacturing Engineering and Technologies. NEWTECH 2013 . KTH Royal Institute of Technology, Stockholm, Sweden, pp. 231-240. ISBN 9789175018935

Shagluf, Abubaker, Longstaff, Andrew P., Fletcher, Simon, Denton, Paul and Myers, Alan (2013) Predictive Calibration-Based Tolerance Boundaries For Arresting Deterioration of Machine Tool Accuracy. In: 2nd Annual EPSRC Manufacturing the Future Conference, 17-18 September 2013, Cranfield University, UK.

Shahzad, Atif, Asim, Taimoor, Mishra, Rakesh and Paris, Achilleos (2013) Performance of a Vertical Axis Wind Turbine under Accelerating and Decelerating Flows. Procedia CIRP: TESC 2013 - 2nd International Through-life Engineering Services Conference, 11. pp. 311-316. ISSN 2212 - 8271

Tahera, Khadija, Eckert, Claudia M. and Earl, Chris F. (2013) Optimizing Overlap between Testing and Design in Engineering Product Development Processes. In: Smart Product Engineering: Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013. Lecture Notes in Production Engineering . Springer-Verlag GmbH, Heidelberg, Bochum, Germany, pp. 201-210. ISBN 978-3-642-30817-8

Tan, Feng, Xu, Qiang, Lu, Zhongyu and Barrans, Simon (2013) The development of computational FE system for creep damage analysis of weldment. In: 6th International ‘HIDA’ Conference: Life/Defect Assessment & Failures in High Temperature Plant, 2nd-4th December 2013, Nagasaki, Japan.

Tan, Feng, Xu, Qiang, Lu, Zhongyu and Liu, Dezheng (2013) Practical guidance on the application of R-K integration method in finite element analysis of creep damage problem. In: Proceedings The 2013 World Congress in Computer Science, Computer Engineering, and Applied Computing. CSREA Press, pp. 141-145. ISBN 1-60132-238-0

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2013) Emission Characteristics of CI Engine Running with Biodiesel. In: World Congress on Petrochemistry and Chemical Engineering, 18th - 20th November 2013, San Antonio, Texas, USA. (Unpublished)

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2013) LHV Predication Models and LHV Effect on the Performance of CI Engine Running with Biodiesel Blends. Energy Conversion and Management, 71. pp. 217-226. ISSN 0196-8904

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2013) Combustion and Performance Characteristics of CI Engine Running with Biodiesel. Energy, 51 (1). pp. 101-115. ISSN 0360-5442

Tian, Xiange, Wang, Tie, Chen, Zhi, Gu, Fengshou and Ball, Andrew (2013) A transient enhancement method for two-stage helical gearbox fault diagnosis based on ALE. Journal of Signal and Information Processing, 4 (3B). pp. 132-137. ISSN 2159-4481

Tong, Zhen and Luo, Xichun (2013) An atomistic investigation of nanometric cutting process using a multi-tip single crystal diamond tool. In: Lamdamap 10th International Conference, 20th-21st March 2013, Buckinghamshire, UK.

Tong, Zhen, Luo, Xichun, Blunt, Liam and Jiang, Xiang (2013) An atomistic investigation of FIB process damage on diamond. In: The 13th International EUSPEN Conference & Exhibition, 27th-30th May 2013, Berlin, Germany.

Towsyfyan, Hossein, Raharjo, Parno, Gu, Fengshou and Ball, Andrew (2013) Characterization of Acoustic Emissions from Journal Bearings for Fault Detection. In: NDT 2013, 10th-12th September 2013, Telford, UK.

Tran, Van Tung, Al Thobiani, Faisal and Ball, Andrew (2013) An Application to Transient Current Signal based Induction Motor Fault Diagnosis of Fourier-Bessel Expansion and Simplified Fuzzy ARTMAP. Expert Systems With Applications, 40 (13). pp. 5372-5384. ISSN 0957-4174

Tran, Van Tung, Yang, Bo-Suk, Gu, Fengshou and Ball, Andrew (2013) Thermal Image Enhancement using Bi-dimensional Empirical Mode Decomposition in Combination with Relevance Vector Machine for Rotating Machinery Fault Diagnosis. Mechanical Systems and Signal Processing, 38 (2). pp. 601-614. ISSN 0888-3270

Unver, Ertu, Howard, Chris and Swann, David (2013) Design & Development of Scalp Cooling Cap. In: Smart Scalp Cooling Symposium, 16 May 2013, 3M Buckley Innovation Centre , Huddersfield, UK. (Submitted)

Ur Rehman, Atique, Shinde, Subhash, Singh, Vikas K, Paul, Akshoy R, Jain, Anuj and Mishra, Rakesh (2013) CFD based condition monitoring of centrifugal pumps. In: COMADEM 2013, 11-13 June 2013, Helsinki, Finland.

Walker, Martyn (2013) Encouragement of sound education amongst the industrial classes: mechanics’ institutes and working-class membership 1838–1881. Educational Studies, 39 (2). pp. 142-155. ISSN 0305-5698

Walker, Martyn (2013) ‘The Yorkshire Union has grown to the most extensive educational confederation in the kingdom’: the growth and distribution of the Yorkshire Union of Mechanics' Institutes, 1838–1890. The Australian Library Journal, 62 (2). pp. 125-139. ISSN 0004-9670

Wang, M., Peng, Z., Wang, Jian and Jiang, Xiang (2013) Wear characterisation of articular cartilage surfaces at a nano-scale using atomic force microscopy. Tribology International, 63. pp. 235-242. ISSN 0301-679X

Wullems, C., Hughes, Peter and Nikandros, G. (2013) Modelling risk at low-exposure railway level crossings: supporting an argument for low-cost level crossing warning devices with lower levels of safety integrity. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 227 (5). pp. 560-569. ISSN 0954-4097

Xu, Qi Hua, Xu, Qiang, Lu, Zhongyu, Pang, Yongxin and Short, Michael (2013) A review of creep deformation and rupture mechanisms of low Cr-Mo alloy for the development of creep damage constitutive equations under lower stress. In: 2013 World Congress in Computer Science and Computer Engineering and Application, 22nd - 5th July 2013, Las Vegas, USA.

Yang, Xin, Xu, Qiang and Lu, Zhongyu (2013) The Development and Validation of the Creep Damage Constitutive Equations for P91 Alloy. In: Proceedings of the 2013 World Congress in Computer Science and Computer Engineering and Application. CSREA Press, pp. 121-127. ISBN 1-60132-238-0

Yang, Xin, Xu, Qiang and Lu, Zhongyu (2013) The relative significance of internal damage mechanisms on the overall creep damage and ultimate failure of P91 steel. In: 6th International ‘HIDA’ Conference: Life/Defect Assessment & Failures in High Temperature Plant, 2nd – 4th December 2013, Nagasaki, Japan.

Yap, Y.F., Vargas, F.M. and Chai, John (2013) A level-set method for convective–diffusive particle deposition. Applied Mathematical Modelling, 37 (7). pp. 5245-5259. ISSN 0307904X

Zeng, Shengye, Blunt, Liam and Racasan, Radu (2013) An investigation of the viability of bonnet polishing as a possible method to manufacture hip prostheses with multi-radius femoral heads. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Zeng, Wenhan, Jiang, Xiangqian, Scott, Paul J. and Li, Tukun (2013) A New Method to Characterize the Structured Tessellation Surface. Procedia CIRP, 10. pp. 155-161. ISSN 2212-8271

Zhang, Yong Xiang, Liang, Bo, Li, Jun and Ke, Wei (2013) Blind Source Separation for Impact Force Induced by Piston Slaps in Diesel Engines. Advanced Materials Research, 681. pp. 93-98. ISSN 1662-8985

Zhang, Zonghua, Huang, Shujun, Meng, Shasha, Gao, Feng and Jiang, Xiangqian (2013) A simple, flexible and automatic 3D calibration method for a phase calculation-based fringe projection imaging system. Optics Express, 21 (10). p. 12218. ISSN 1094-4087

Zhao, Yunshi and Liang, Bo (2013) Re-adhesion control for a railway single wheelset test rig based on the behaviour of the traction motor. Vehicle System Dynamics, 51 (8). pp. 1173-1185. ISSN 0042-3114

Zhen, Dong, Wang, T., Gu, Fengshou and Ball, Andrew (2013) Fault diagnosis of motor drives using stator current signal analysis based on dynamic time warping. Mechanical Systems and Signal Processing, 34 (1-2). pp. 191-202. ISSN 0888-3270

Zhen, Dong, Wang, Tie, Gu, Fengshou, Tesfa, Belachew and Ball, Andrew (2013) Acoustic measurements for the combustion diagnosis of diesel engines fuelled with biodiesels. Measurement Science and Technology, 24 (5). 055005. ISSN 0957-0233

2012

Abdusslam, S.A., Raharjo, Parno, Gu, Fengshou and Ball, Andrew (2012) Bearing defect detection and diagnosis using a time encoded signal processing and pattern recognition method. Journal of Physics: Conference Series, 364. 012036. ISSN 1742-6596

Abdusslam, Shukri Ali (2012) Detection and Diagnosis of Rolling Element Bearing Faults Using Time Encoded Signal Processing and Recognition. Doctoral thesis, University of Huddersfield.

Ahmed, M., Gu, Fengshou and Ball, Andrew (2012) Fault Detection of Reciprocating Compressors using a Model from Principles Component Analysis of Vibrations. Journal of Physics: Conference Series, 364. 012133. ISSN 1742-6596

Albraik, A., Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2012) Diagnosis of Centrifugal Pump Faults Using Vibration Methods. Journal of Physics: Conference Series, 364. 012139. ISSN 1742-6596

Allport, John and Jupp, Martyn (2012) Turbocharger blade vibration: Measurement and validation through laser tip-timing. In: 10th International Conference on Turbochargers and Turbocharging. Elsevier, London, UK, pp. 173-181. ISBN 978-0-85709-209-0

Alwodai, Ahmed, Gu, Fengshou and Ball, Andrew (2012) A Comparison of Different Techniques for Induction Motor Rotor Fault Diagnosis. Journal of Physics: Conference Series, 364. 012066. ISSN 1742-6596

An, Lili, Xu, Qiang, Xu, Donglai and Lu, Zhongyu (2012) Preliminary analysing of experimental data for the development of high Cr Alloy Creep damage Constitutive Equations. In: 18th International Conference on Automation and Computing (ICAC), 2012. ICAC 2012 . IEEE, Loughborough, UK, pp. 1-5. ISBN 978-1-4673-1722-1

An, Lili, Xu, Qiang, Xu, Donglai and Lu, Zhongyu (2012) Review on the current state of developing of advanced Creep Damage Constitutive Equations for high Chromium Alloy. Advanced Materials Research, 510. pp. 776-780. ISSN 1662-8985

Anyakwo, Arthur, Pislaru, Crinela and Ball, Andrew (2012) A New Method for Modelling and Simulation of the Dynamic Behaviour of the Wheel-rail contact. International Journal of Automation and Computing, 9 (3). pp. 237-247. ISSN 1476-8186

Anyakwo, Arthur, Pislaru, Crinela and Ball, Andrew (2012) A New Method for Modelling and Simulation of the Dynamic Behaviour of the Wheel-rail contact. International Journal of Automation and Computing, 9 (3). ISSN 1476-8186

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modelling and simulation of dynamic wheel-rail interaction using a roller rig. Journal of Physics: Conference Series, 364. 012060. ISSN 1742-6596

Arebi, Lufti, Gu, Fengshou and Ball, Andrew (2012) A comparative study of misalignment detection using a novel Wireless Sensor with conventional Wired Sensors. Journal of Physics: Conference Series, 364. 012049. ISSN 1742-6596

Ashari, Djoni, Pislaru, Crinela and Ball, Andrew (2012) Energy Optimisation of Sensorless Induction Motor Drives Using a Novel Robust-Adaptive Flux Simulator. In: The 2nd International Electric Drives Production Conference, 15th - 18th October 2012, Nuremberg, Germany. (Unpublished)

Asim, Taimoor and Mishra, Rakesh (2012) Optimal Design of Capsule Transporting Pipeline carrying Spherical Capsules. Journal of Physics: Conference Series, 364 (1). 012070. ISSN 1742-6596

Asim, Taimoor, Mishra, Rakesh and Ido, Itoro (2012) Pressure Drop in Capsule Transporting Bends Carrying Spherical Capsules. Journal of Physics: Conference Series, 364 (1). 012068. ISSN 1742-6596

Asim, Taimoor, Mishra, Rakesh and Kollar, László E. (2012) Optimisation of a Horizontal Capsule Transporting Pipeline carrying Cylindrical Capsules. Journal of Physics: Conference Series, 364 (1). 012071. ISSN 1742-6596

Asim, Taimoor, Mishra, Rakesh, Nearchou, Anastasios and Ubbi, Kuldip (2012) Effect of the Length and Diameter of a Cylindrical Capsule on the Pressure Drop in a Horizontal Pipeline. Journal of Physics: Conference Series, 364 (1). 012069. ISSN 1742-6596

Asim, Taimoor, Mishra, Rakesh and Pradhan, Suman (2012) A Study on Optimal Sizing of Pipeline Transporting Equi-sized Particulate Solid-Liquid Mixture. Journal of Physics: Conference Series, 364 (1). 012072. ISSN 1742-6596

Asim, Taimoor, Mishra, Rakesh and Rao, Vasu (2012) Effect of Eccentricity on Pipe Boundary Layer Growth for Flows in Annulus. In: Computing and Engineering Researchers’ Conference, March 2012, University of Huddersfield.

Asim, Taimoor, Mishra, Rakesh and Rao, Vasu (2012) Spatiotemporal Growth of Laminar Boundary Layers in a Concentric Annulus. In: Computing and Engineering Researchers’ Conference, March 2012, University of Huddersfield.

Bevan, Adam and Molyneux-Berry, Paul (2012) Optimisation of Wheelset Maintenance using Whole System Cost Modelling. In: Rail Research UK Association Annual Conference, 7th November 2012, London. (Unpublished)

Bills, Paul J. and Blunt, Liam (2012) Measurement of Bearing Surfaces. In: Metal-on-Metal Hip Replacements: Re-solving The Uncertainties, 28th May 2012, Royal College of Surgeons of England, London.

Bills, Paul J., Lou, Shan and Jiang, Xiang (2012) Development of morphological filtering method for specification and characterisation of hip replacement taper junctions. In: 12th International Conference of the European Society for Precision Engineering and Nanotechnology, 4th-8th June 2012, Stockholm, Sweden.

Bills, Paul J., Racasan, Radu, Hart, A. J., Skinner, J. and Blunt, Liam (2012) Accurate determination of clinical wear in retrieved metal-on-metal hip replacement joints. In: Euro-Mediterranean Conference on Bioengineering and Biomaterials, 4th-6th July 2012, Fes, Morocco. (Unpublished)

Bills, Paul J., Racasan, Radu, Hart, A.J., Skinner, J., Jiang, Xiang and Blunt, Liam (2012) Using metrology to bridge the gap in understanding between engineering and biological failure: the case of metal-on-metal hip replacements. In: 1st Annual EPSRC Manufacturing the Future Conference, 19th-20th September 2012, Loughborough, UK.

Bills, Paul J., Racasan, Radu, Skinner, J., Hart, A.J. and Blunt, Liam (2012) Effect of Uncertainty on Wear Measurement of Metal-on-metal Total Hip Replacement Components. In: ASTM Symposium on Metal-on-Metal Total hip Replacement Devices, 8th May 2012, Phoenix, AZ, USA. (Unpublished)

Bills, Paul J., Racasan, Radu, Underwood, R.J., Cann, P., Skinner, J., Hart, A.J., Jiang, Xiang and Blunt, Liam (2012) Volumetric wear assessment of retrieved metal-on-metal hip prostheses and the impact of measurement uncertainty. Wear, 274. pp. 212-219. ISSN 0043-1648

Bills, Paul J., Underwood, R.J., Cann, P. and Hart, A. J. (2012) What is required to measure the wear of explanted metal on metal hips? Bone and joint journal: Orthopaedic Proceedings, 94-B (Sup 18). p. 100. ISSN 1358-992X

Blunt, Liam, Bills, Paul J. and Racasan, Radu (2012) Measurement of Tapers. In: Metal-on-Metal Hip Replacements: Re-solving The Uncertainties, 28th May 2012, Royal College of Surgeons of England, London.

Bryant, David, Fieldhouse, John D., Ashraf, Naveed and Solms, Florian (2012) Investigation of brake pad vibration under dynamic squeal conditions. In: EuroBrake 2012, 16-18 April, Dresden, Germany.

Bryant, David, Solms, Florian, Fieldhouse, John D. and Ashraf, Naveed (2012) Investigation Of Brake Pad Vibration Under Dynamic Squeal Conditions. In: EuroBrake 2012, 16-18 April, Dresden, Germany.

Che, Zhizhao, Wong, Teck Neng, Nguyen, Nam-Trung and Chai, John (2012) Formation and breakup of compound pendant drops at the tip of a capillary and its effect on upstream velocity fluctuations. International Journal of Heat and Mass Transfer, 55 (4). pp. 1022-1029. ISSN 0017-9310

Chen, X., Opoz, Tahsin Tecelli and Oluwajobi, Akinjide O. (2012) Grinding Surface Creation using Finite Element Method and Molecular Dynamics. Advanced Materials Research, 500. pp. 314-319. ISSN 1662-8985

Chen, Zhi, Wang, T., Gu, Fengshou, Haram, Mansaf and Ball, Andrew (2012) Gear Transmission Fault Diagnosis Based on the Bispectrum Analysis of Induction Motor Current Signatures. Journal of Mechanical Engineering, 48 (21). pp. 84-90. ISSN 0577-6686

Clough, David A (2012) Non-Contact Measurement and Analysis of Machine Tool Spindles. Masters thesis, University of Huddersfield.

Clough, David A, Fletcher, Simon, Longstaff, Andrew P. and Willoughby, Peter (2012) Practical in-situ calibration method for the non-linear output from a low cost eddy current sensor. In: 37th International Matador Conference, 25th - 27th July 2012, Manchester, England.

Clough, David A, Fletcher, Simon, Longstaff, Andrew P. and Willoughby, Peter (2012) Thermal Analysis for Condition Monitoring of Machine Tool Spindles. Journal of Physics: Conference Series, 364 (364). ISSN 1742-6596

Cochrane, W. A., Luo, Xichun, Lim, T., Taylor, W. D. and Schnetler, H. (2012) Design of a Micro-Autonomous Robot for Use in Astronomical Instruments. International Journal of Optomechatronics, 6 (3). pp. 199-212. ISSN 1559-9612

Colley, Gareth (2012) Design, Operation and Diagnostics of a Vertical Axis Wind Turbine. Doctoral thesis, University of Huddersfield.

Elbarghathi, Fathalla, Wang, T., Zhen, Dong, Gu, Fengshou and Ball, Andrew (2012) Two Stage Helical Gearbox Fault Detection and Diagnosis based on Continuous Wavelet Transformation of Time Synchronous Averaged Vibration Signals. Journal of Physics: Conference Series, 364. 012083. ISSN 1742-6596

Elsayed, A., Al-dadah, R. K., Mahmoud, S. and Rezk, Ahmed (2012) Experimental and theoretical investigation of small-scale cooling system equipped with helically coiled evaporator and condenser. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226 (3). pp. 724-737. ISSN 0954-4062

Elsayed, Ahmed M., AL-Dadah, Raya K., Mahmoud, Saad and Rezk, Ahmed (2012) Investigation of flow boiling heat transfer inside small diameter helically coiled tubes. International Journal of Refrigeration, 35 (8). pp. 2179-2187. ISSN 01407007

Fan, Bin, Hu, Niaoqing, Hu, Lei and Gu, Fengshou (2012) Application of Phase Space Warping on Damage Tracking for Bearing Fault. Journal of Physics: Conference Series, 364. 012025. ISSN 1742-6596

Gao, F., Muhamedsalih, Hussam and Jiang, Xiang (2012) In-Process Fast Surface Measurement Using Wavelength Scanning Interferometry. Advanced Materials Research, 622-62. pp. 357-360. ISSN 1662-8985

Gao, F., Muhamedsalih, Hussam and Jiang, Xiang (2012) In-process fast surface measurement using wavelength scanning interferometry. In: 2012 International Conference on Manufacturing and Optimization, September 15-16, 2012, Beijing, China.

Ge, Q., Yap, Y. F., Vargas, F. M., Zhang, M. and Chai, John (2012) A Total Concentration Method for Modeling of Deposition. Numerical Heat Transfer, Part B: Fundamentals, 61 (4). pp. 311-328. ISSN 1040-7790

Goel, Saurav, Luo, Xichun and Reuben, Robert L. (2012) Molecular dynamics simulation model for the quantitative assessment of tool wear during single point diamond turning of cubic silicon carbide. Computational Materials Science, 51 (1). pp. 402-408. ISSN 09270256

Goel, Saurav, Luo, Xichun and Reuben, Robert L. (2012) Shear instability of nanocrystalline silicon carbide during nanometric cutting. Applied Physics Letters, 100 (23). p. 231902. ISSN 0003-6951

Goel, Saurav, Luo, Xichun, Reuben, Robert L. and Pen, Hongmin (2012) Influence of temperature and crystal orientation on tool wear during single point diamond turning of silicon. Wear, 284-28. pp. 65-72. ISSN 0043-1648

Goel, Saurav, Luo, Xichun, Reuben, Robert L. and Rashid, Waleed Bin (2012) Replacing diamond cutting tools with CBN for efficient nanometric cutting of silicon. Materials Letters, 68. pp. 507-509. ISSN 0167577X

Haram, Mansaf, Wang, T., Gu, Fengshou and Ball, Andrew (2012) Electrical Motor Current Signal Analysis using a Modulation Signal Bispectrum for the Fault Diagnosis of a Gearbox Downstream. Journal of Physics: Conference Series, 364. 012050. ISSN 1742-6596

Hart, A. J., Matthies, A.K., Racasan, Radu, Bills, Paul J., Panagiotidou, A., Blunt, Liam, Blunn, G. and Skinner, J. (2012) Taper wear contributes only a third of the total volumetirc material loss in large head metal on metal hip replacement. In: British Orthopaedic Research Society Annual Meeting, September 24th-25th 2012, London, UK. (Unpublished)

He, Xiaocong, Gu, Fengshou and Ball, Andrew (2012) Recent development in finite element analysis of self-piercing riveted joints. The International Journal of Advanced Manufacturing Technology, 58 (5-8). pp. 643-649. ISSN 0268-3768

Hexter, A, Blunn, G, Bills, Paul J., Panagiotidou, A, Matthies, A, Skinner, JA and Hart, AJ (2012) The Definition of Taper Failure in Metal-On-Metal Modular Total Hip Replacement. In: ASTM Symposium on Metal-on-Metal Total Hip Replacement Devices, 8th May 2012, Phoenix, AZ, USA. (Submitted)

Hu, Lei, Hu, Niaoqing, Fan, Bin and Gu, Fengshou (2012) Application of novelty detection methods to health monitoring and typical fault diagnosis of a turbopump. Journal of Physics: Conference Series, 364. 012128. ISSN 1742-6596

Hu, Niaoqing, Hu, Lei, Zhang, Xiaofei, Gu, Fengshou and Ball, Andrew (2012) Enhancement detection of characteristic signal using stochastic resonance by adding a harmonic excitation. Journal of Physics: Conference Series, 364. 012046. ISSN 1742-6596

Johnson, Anthony, Dooley, Martin, Gibson, Andrew and Barrans, S M (2012) Practical Energy Storage Utilising Kinetic Energy Storage Batteries (KESB). In: 2nd International Symposium on Environment-Friendly Energies and Applications (EFEA), 25 - 27 June 2012, Northumbria University, UK.

Kubiak, Krzysztof, Mathia, T. G. and Bigerelle, M. (2012) Influence of roughness on ZDDP tribofilm formation in boundary lubricated fretting. Tribology – Materials, Surfaces \& Interfaces, 6 (4). pp. 182-188. ISSN 1751-5831

Leung, AYT, Guo, Zhongjin and Myers, Alan (2012) Steady state bifurcation of a periodically excited system under delayed feedback controls. Communications in Nonlinear Science and Numerical Simulation, 17 (12). pp. 5256-5272. ISSN 1007-5704

Li, Haiwang, Wong, Teck Neng, Nguyen, Nam-Trung and Chai, John (2012) Numerical modeling of tunable optofluidics lens based on combined effect of hydrodynamics and electroosmosis. International Journal of Heat and Mass Transfer, 55 (9-10). pp. 2647-2655. ISSN 0017-9310

Li, Tukun (2012) Software Measurement Standards in Surface Metrology: Basics, Concepts, Methods. LAP LAMBERT Academic Publishing, Saarbrücken, Germany. ISBN 978-3659278358

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2012) Algorithms for morphological profile filters and their comparison. Precision Engineering, 36 (3). pp. 414-423. ISSN 01416359

Lou, Shan, Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2012) Comparison of Robust Filtration Techniques in Geometrical Metrology. In: 18th International Conference on Automation and Computing (ICAC) 2012. IEEE, Leicestershire, UK, pp. 1-6. ISBN 978-1-4673-1722-1

Luo, Xichun, Goel, Saurav and Reuben, Robert L. (2012) A quantitative assessment of nanometric machinability of major polytypes of single crystal silicon carbide. Journal of the European Ceramic Society, 32 (12). pp. 3423-3434. ISSN 09552219

Luo, Xichun, Sun, Ji Ning, Chang, Wen Long and Ritchie, James M. (2012) Single Point Diamond Turning of Calcium Fluoride Optics. Key Engineering Materials, 516. pp. 408-413. ISSN 1662-9795

Matthies, A.K., Racasan, Radu, Bills, Paul J., Panagiotidou, A, Blunt, Liam, Skinner, J., Blunn, G and Hart, A. J. (2012) Corrosion is the main mechanism of material loss at the taper junction of large head metal on metal hip replacements. In: British Orthopaedic Society Annual Meeting, September 24th-25th 2012, London, UK. (Unpublished)

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2012) An efficient offline method for determining the thermally sensitive points of a machine tool structure. In: 37th International Matador Conference, 25th-27th July 2012, Manchester, England.

Mohammed, Arif, Folkes, Janet and Chen, Xun (2012) Detection of grinding temperatures using laser irradiation and acoustic emission sensing technique. Materials and Manufacturing Processes, 27 (4). pp. 395-400. ISSN 1042-6914

Molyneux-Berry, Paul and Bevan, Adam (2012) Wheel surface damage: relating the position and angle of forces to the observed damage patterns. Vehicle System Dynamics, 50 (S1). pp. 335-347. ISSN 0042-3114

Muhamedsalih, Hussam, Gao, F. and Jiang, Xiang (2012) Comparison study of algorithms and accuracy in the wavelength scanning interferometry. Applied Optics, 51 (36). pp. 8854-8862. ISSN 0003-6935

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modern techniques for condition monitoring of railway vehicle dynamics. Journal of Physics: Conference Series, 364. 012016. ISSN 1742-6596

Oluwajobi, Akinjide O. (2012) Nanomachining Technology Development. Doctoral thesis, University of Huddersfield.

Oluwajobi, Akinjide O. and Chen, X. (2012) Acoustic Emission Detection Signals in the Experimental Validation of Nanometric Machining Simulations. In: 13th International Conference on Tools, ICT-2012, 27 – 28 March 2012, Miskolc, Hungary.

Oluwajobi, Akinjide O. and Chen, X. (2012) The Effect of The Variation of Tool End Geometry on Material Removal Mechanisms in Nanomachining. In: 13th International Conference on Tools, ICT-2012, 27 – 28 March 2012, Miskolc, Hungary.

Oluwajobi, Akinjide O. and Chen, Xun (2012) Multi-Pass Nanometric Machining Simulation using the Molecular Dynamics (MD). Key Engineering Materials, 496. pp. 241-246. ISSN 1013-9826

Opoz, Tahsin Tecelli (2012) Investigation of Material Removal Mechanism in Grinding: A Single Grit Approach. Doctoral thesis, University of Huddersfield.

Park, Kyoo-seon, Asim, Taimoor and Mishra, Rakesh (2012) Computational Fluid Dynamics based Fault Simulations of a Vertical Axis Wind Turbines. Journal of Physics: Conference Series, 364 (1). 012138. ISSN 1742-6596

Park, Kyooseon, Asim, Taimoor and Mishra, Rakesh (2012) Simulation Based Approach to Predict Vertical Axis Wind Turbine Faults using Computational Fluid Dynamics. In: 1st International Conference on Through-life Engineering Services (TESConf 2012), 5th-6th November 2012, Bedfordshire, UK. (Submitted)

Park, Kyooseon, Asim, Taimoor, Mishra, Rakesh and Pradhan, Suman (2012) Condition Based Monitoring of Vertical Axis Wind Turbines using Computational Fluid Dynamics. In: Thirty Ninth National Conference on Fluid Mechanics and Fluid Power, 13th-15th December 2012, Surat, India. (Submitted)

Park, Kyooseon, Asim, Taimoor, Mishra, Rakesh, Shahzad, Atif and Marangwanda, Gilbert (2012) Computational Fluid Dynamics based Performance Optimisation of Vertical Axis Marine Current Turbines. In: 2nd International Workshop and Congress on eMaintenance, 13-14 December 2012, Lulea, Sweden. (Unpublished)

Perkins, Christopher (2012) Investigation of the Impacts of Standardisation and Data Handling within the Machine tool Service Environment. Masters thesis, University of Huddersfield.

Perkins, Christopher, Longstaff, Andrew P., Fletcher, Simon and Willoughby, Peter (2012) Practical Implementation of Machine tool Metrology and Maintenance Management Systems. Journal of Physics: Conference Series, 364. 012105. ISSN 1742-6596

Perkins, Christopher, Longstaff, Andrew P., Fletcher, Simon and Willoughby, Peter (2012) Rate-of-change analysis applied to machine tool monitoring and maintenance schedules. In: Advanced Mathematical and Computational Tools in Metrology and Testing IX. Series on Advances in Mathematics for Applied Sciences, 84 . World Scientific, London, UK, pp. 329-333. ISBN 9789814397940

Pislaru, Crinela (2012) Modelling and Simulation of the Dynamic Behaviour of Wheel-Rail Interface. In: IET Event: The Railway Wheel-Rail Interface: Damage Mechanisms and Potential Solutions, 5 March 2012, University of Huddersfield.

Pislaru, Crinela, Lane, Mark, Ball, Andrew and Gu, Fengshou (2012) Fault Detection of Gearbox from Inverter Signals Using Advanced Signal Processing Techniques. Journal of Physics: Conference Series, 364. 012080. ISSN 1742-6596

Raharjo, Parno, Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2012) Vibro-Acoustic Characteristic of A Self Aligning Spherical Journal Bearing due to Eccentric Bore Fault. In: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK. (Unpublished)

Raharjo, Parno, Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2012) Vibro-Acoustic Characteristic of A Self Aligning Spherical Journal Bearing due to Eccentric Bore Fault. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK. (Unpublished)

Raharjo, Parno, Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2012) A Comparative Study of the Monitoring of a Self Aligning Spherical Journal using Surface Vibration, Airborne Sound and Acoustic Emission. Journal of Physics: Conference Series, 364. 012035. ISSN 1742-6596

Rao, Vasu, Mishra, Rakesh, Asim, Taimoor and Pradhan, Suman (2012) An Investigation on Ventilation Air distribution within Rectangular and Circular Enclosures. In: Thirty Ninth National Conference on Fluid Mechanics and Fluid Power, 13th-15th December 2012, Surat, India. (Submitted)

Retzer, H., Mishra, Rakesh, Ball, Andrew and Schmidt, K. (2012) Fallback level concepts for conventional and by-wire automotive brake systems. Journal of Physics: Conference Series, 364. 012019. ISSN 1742-6596

Rezk, Ahmed, Al-Dadah, Raya, Mahmoud, Saad and Elsayed, Ahmed (2012) Characterisation of metal organic frameworks for adsorption cooling. International Journal of Heat and Mass Transfer, 55 (25-26). pp. 7366-7374. ISSN 0017-9310

Rezk, Ahmed and Al-Dadah, Raya K. (2012) Physical and operating conditions effects on silica gel/water adsorption chiller performance. Applied Energy, 89 (1). pp. 142-149. ISSN 0306-2619

Scott, Paul J. and Forbes, Alistair B. (2012) Mathematics for modern precision engineering. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 4066-4088. ISSN 1364-503X

Selig, Michael, Ball, Andrew, Ash, J. and Schmidt, K. (2012) The influence of tyre contact patch and on the stopping distance of automotive vehicles. Journal of Physics: Conference Series, 364. 012014. ISSN 1742-6596

Selig, Michael, Shi, Zhanqun, Ball, Andrew and Schmidt, K. (2012) A modern diagnostic approach for automobile systems condition monitoring. Journal of Physics: Conference Series, 364. 012013. ISSN 1742-6596

Shahzad, Atif, Asim, Taimoor, Park, Kyooseon, Pradhan, Suman and Mishra, Rakesh (2012) Numerical Simulations of Effects of Faults in a Vertical Axis Wind Turbine’s Performance. In: 2nd International Workshop and Congress on eMaintenance, 13-14 December 2012, Lulea, Sweden. (Submitted)

Sun, J, Luo, Xichun, Chang, W, Ritchie, J M, Chien, J and Lee, A (2012) Fabrication of periodic nanostructures by single-point diamond turning with focused ion beam built tool tips. Journal of Micromechanics and Microengineering, 22 (11). p. 115014. ISSN 0960-1317

Sun, J., Luo, Xichun, Ritchie, J. and Hrncir, T. (2012) A predictive divergence compensation approach for the fabrication of three-dimensional microstructures using focused ion beam machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (2). pp. 229-238. ISSN 0954-4054

Sun, J., Luo, Xichun, Ritchie, J.M., Chang, W. and Wang, W. (2012) An investigation of redeposition effect for deterministic fabrication of nanodots by focused ion beam. Precision Engineering, 36 (1). pp. 31-36. ISSN 0141-6359

Sun, Ji Ning, Luo, Xichun, Chang, Wen Long and Ritchie, James M. (2012) Fabrication of Freeform Micro Optics by Focused Ion Beam. Key Engineering Materials, 516. pp. 414-419. ISSN 1662-9795

Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2012) Five-Axis Machine Tool Condition Monitoring Using dSPACE Real-Time System. Journal of Physics: Conference Series, 364. 012091. ISSN 1742-6596

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2012) Performance of CI Engines Fuelled with Biodiesel Blends during Transient Operations. In: Powertrain Modelling and Control Testing, Mapping and Calibration, 4th -6th September 2012, University of Bradford. (Unpublished)

Tesfa, Belachew, Horler, Greg, Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2012) A clamping force measurement system for monitoring the condition of bolted joints on railway track joints and points. Journal of Physics: Conference Series, 364 (1). 012021. ISSN 1742-6596

Tesfa, Belachew, Mishra, Rakesh, Asim, Taimoor and Pradhan, Suman (2012) Drill Bit Performance Investigation Using Computational Fluid Dynamics. In: Proceedings of the Thirty Ninth 39th National Conference on Fluid Mechanics and Fluid Power, 13th - 15th December 2012, SVNIT Surat, Gujarat, India. (Submitted)

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2012) Water Injection Effects on the Performance and Emission Characteristics of a CI Engine Operating with Biodiesel. Renewable Energy, 37 (1). pp. 333-344. ISSN 0960-1481

Tian, X., Gu, Fengshou, Zhen, Dong, Tran, Van Tung and Ball, Andrew (2012) A study on transient enhancement for fault diagnosis based on an active noise control system. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK. (Unpublished)

Tian, Yuan, Wang, Jian, Peng, Zhongxiao and Jiang, Xiang (2012) A new approach to numerical characterisation of wear particle surfaces in three-dimensions for wear study. Wear, 282-3. pp. 59-68. ISSN 0043-1648

Tong, Zhen, Luo, Xichun, Liang, Yingchun, Bai, Qingshun and Sun, Jining (2012) Simulation Research on FIB Processing: A Comparison between Silicon and Diamond. In: Proceedings of the18th International Conference on Automation and Computing. ICAC (2012). IEEE, Loughborough, UK, pp. 1-5. ISBN 978-1-4673-1722-1

Tran, Van Tung, Pham, Hong Thom, Yang, Bo-Suk and Nguyen, Tan Tien (2012) Machine performance degradation assessment and remaining useful life prediction using proportional hazard model and support vector machine. Mechanical Systems and Signal Processing, 32. pp. 320-330. ISSN 0888-3270

Tran, Van Tung and Yang, Bo-Suk (2012) An intelligent condition-based maintenance platform for rotating machinery. Expert Systems With Applications, 39 (3). pp. 2977-2988. ISSN 0957-4174

Walker, Martyn (2012) It is only the instructed and trained overlooker and artisan that can successfully compete against foreign skills’: Nineteenth-century adult technical and vocational education offered by the Yorkshire Union of Mechanics’ Institutes and the foundation of further education curricula. Journal of Adult and Continuing Education, 18 (2). pp. 61-79. ISSN 1477-9714

Wang, Jian (2012) Sampling for the Measurement of Structured Surfaces. Doctoral thesis, University of Huddersfield.

Wang, Jian, Jiang, Xiang, Blunt, Liam, Leach, Richard K. and Scott, Paul J. (2012) Intelligent sampling for the measurement of structured surfaces. Measurement Science and Technology, 23 (8). ISSN 0957-0233

Yap, Y. F., Vargas, F. M. and Chai, John (2012) A Level-Set Method for Particle Deposition on Surfaces. In: ASME Conference Proceedings. ASME 2012 Heat Transfer Summer Conference collocated with the ASME 2012 Fluids Engineering Division Summer Meeting and the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, 1 . ASME, Puerto Rico, USA, pp. 923-935. ISBN 978-0-7918-4477-9

Zeng, Shengye, Blunt, Liam and Jiang, Xiang (2012) The investigation of material removal in bonnet polishing of CoCr alloy artificial joints. In: Proceedings of the 12th international conference of the european society for precision engineering and nanotechnology EUSPEN 2012. EUSPEN, Stockholm, Sweden, pp. 352-355. ISBN 978-0-9566790-0-0

Zeng, Wenhan, Jiang, Xiang, Scott, Paul J. and Blunt, Liam (2012) Diffusion filtration for the evaluation of MEMs surface. In: ISMTII 2011, 29th June - 2nd July 2011, Kaist, Daejeon, South Korea.

Zhang, Hao (2012) Model Development and Stability Analysis for a Turbocharger Rotor System under Multi-Field Coupled Forces. Doctoral thesis, University of Huddersfield.

Zhang, Hao (2012) Model Development and Stability Analysis for a Turbocharger Rotor System under Multi-Field Coupled Forces. Doctoral thesis, University of Huddersfield.

Zhang, Hongyu, Blunt, Liam, Jiang, Xiang, Fleming, Leigh and Barrans, Simon (2012) The influence of bone cement type on production of fretting wear on the femoral stem surface: A preliminary study. Clinical Biomechanics, 27 (7). pp. 666-672. ISSN 0268-0033

Zhang, Hongyu, Shi, Zhanqun, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2012) Stability Analysis of a Turbocharger Rotor System Supported on Floating Ring Bearings. Journal of Physics: Conference Series, 364. 012032. ISSN 1742-6596

Zhen, Dong (2012) A Study of Non-stationary Signal Processing for Machinery Condition Monitoring. Doctoral thesis, University of Huddersfield.

Zhen, Dong, Tesfa, Belachew, Yuan, X., Wang, R., Gu, Fengshou and Ball, Andrew (2012) An investigation of the acoustic characteristics of a compression ignition engine operating with biodiesel blends. Journal of Physics: Conference Series, 364. 012015. ISSN 1742-6596

Zhen, Dong, Wang, T., Gu, Fengshou, Tran, Van Tung and Ball, Andrew (2012) Combustion Analysis of a CI Engine with Biodiesel Blends based on Vibro-Acoustic Measurement. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK. (Unpublished)

Zhu, Hao (2012) Measurement and Characterisation of Micro/nano-scale Structured Surfaces. Doctoral thesis, University of Huddersfield.

2011

Abdusslam, S.A., Ahmed, Mahmud, Raharjo, Parno, Gu, Fengshou and Ball, Andrew (2011) Time Encoded Signal Processing and Recognition of Incipient Bearing Faults. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Abuhabaya, Abdullah, Fieldhouse, John D. and Brown, D.R. (2011) The Effects of Using Bio-diesel as Fuel on Compression Ignition (CI) Engine and Its Production from Vegetable Oils. In: Proceedings of 2011 International Conference on Environmental, Biomedical and Biotechnology (IPCBEE). International Association of Computer Science and Information Technoloyg (IACSIT), Singapore, pp. 41-46. ISBN 978-981-08-9168-8

Ahmed, Mahmud, Abdusslam, S.A., Baqqar, Mabrouka, Gu, Fengshou and Ball, Andrew (2011) Fault Classification of Reciprocating Compressor Based on Neural Networks and Support Vector Machines. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Al Thobiani, Faisal (2011) The Non-intrusive Detection of Incipient Cavitation in Centrifugal Pumps. Doctoral thesis, University of Huddersfield.

Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2011) Monitoring Cavitation in Centrifugal Pumps using a Noninvasive Capacitance Sensor. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 875-883. ISBN 0954130723

Al-Dadah, R.K., Jackson, G. and Rezk, Ahmed (2011) Solar powered vapor absorption system using propane and alkylated benzene AB300 oil. Applied Thermal Engineering, 31 (11-12). pp. 1936-1942. ISSN 1359-4311

Ali, Jafar, Fieldhouse, John D. and Talbot, Chris J. (2011) Turbulent cooling water discharge into still body of water. Nuclear Engineering and Design, 241 (6). pp. 2006-2012. ISSN 00295493

Alwodai, Ahmed, Gu, Fengshou and Ball, Andrew (2011) Motor Current Signature Analysis of a Variable Speed Drive for Motor Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 884-892. ISBN 0954130723

Alwodai, Ahmed, Gu, Fengshou and Ball, Andrew (2011) Motor Current Signature Analysis of a Variable Speed Drive for Motor Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 884-892. ISBN 0954130723

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Fengshou, Gu (2011) Modelling the Dynamic Behaviour of the Wheel-Rail Interface by Using a Novel 3D Wheel-Rail Contact Model. In: 5th IET Conference on Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 29-30 November 2011, Derby Conference Centre, UK.

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2011) A Novel Approach To Modelling And Simulation Of The Dynamic Behaviour Of The Wheel-Rail Interface. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Arebi, Lufti, Gu, Fengshou, Hu, Niaoqin and Ball, Andrew (2011) Misalignment Detection using a Wireless Sensor Mounted on a Rotating Shaft. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management. COMADEM, Stavanger, Norway, pp. 1289-1299. ISBN 0954130723

Asim, Taimoor, Mishra, Rakesh, Saqib, Muhammad and Ubbi, Kuldip (2011) Optimisation of a Capsule Transporting Pipeline Carrying Spherical Capsules. In: Maintenance Performance Measurement and Management 2011, 14-15 December 2011, Lulea, Sweden.

Asim, Taimoor, Mishra, Rakesh, Saqib, Muhammad and Ubbi, Kuldip (2011) Pressure Drop in Capsule Transporting Pipeline Carrying Spherical Capsules. In: 38th National Conference on Fluid Mechanics and Fluid Power, 15-17 December 2011, Bhopal, India.

Baqqar, Mabrouka, Ahmed, Mahmud and Gu, Fengshou (2011) Data Mining for Gearbox Condition Monitoring. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Bills, Paul J., Underwood, R.J., Sayles, R.S., Cann, P.M., Hart, A, Blunt, Liam and Jiang, Xiang (2011) Taper Wear in Large Head Metal-on-Metal Hips. In: International Conference on BioTribology 2011, 18th - 21th September 2011, Imperial College. (Unpublished)

Blunt, Liam and Xiao, Shaojun (2011) The Use of Surface Segmentation Methods to Characterise Laser Zone Surface Structure on Hard Disc Drives. Wear, 271 (3-4). pp. 604-609. ISSN 0043-1648

Borisov, Oleg, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2011) Efficient machine error measurement. In: Yorkshire and North East Vitae Public Engagement Competition, 6 April 2011, Durham town hall, UK.

Bryant, David, Fieldhouse, John D. and Talbot, Chris J. (2011) Brake Judder - An Investigation of the Thermo-elastic and Thermo-plastic Effects during Braking. International Journal of Vehicle Structures & Systems, 3 (1). ISSN 0975-3060

Castrejon-Pita, J. R., Betton, E. S., Kubiak, Krzysztof, Wilson, M. C. T. and Hutchings, I. M. (2011) The dynamics of the impact and coalescence of droplets on a solid surface. Biomicrofluidics, 5 (1). 014112. ISSN 1932-1058

Chang, W.L., Luo, Xichun, Ritchie, J.M., Sun, J.N. and Mark, C. (2011) Fabrication of microfluidic injection moulds by a hybrid micromachining process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (3). pp. 458-462. ISSN 0954-4054

Chang, Wen Long, Luo, Xichun, Zhao, Qi Ling, Sun, Ji Ning and Zhao, Yi (2011) Laser Assisted Micro Grinding of High Strength Materials. Key Engineering Materials, 496. pp. 44-49. ISSN 1662-9795

Chang, Wenlong, Luo, Xichun, Ritchie, James M., Sun, Jining and Mack, Christopher (2011) Laser deburring process for structured edges on precision moulds. International Journal of Nanomanufacturing, 7 (3/4). pp. 327-335. ISSN 1746-9392

Chang, Wenlong, Sun, Jining, Luo, Xichun, Ritchie, James M. and Mack, Chris (2011) Investigation of microstructured milling tool for deferring tool wear. Wear, 271 (9-10). pp. 2433-2437. ISSN 0043-1648

Che, Zhizhao, Wong, Teck Neng, Nguyen, Nam-Trung, Yap, Yit Fatt and Chai, John (2011) Numerical investigation of upstream pressure fluctuation during growth and breakup of pendant drops. Chemical Engineering Science, 66 (21). pp. 5293-5300. ISSN 00092509

Chen, Jia Xuan, Liang, Ying Chun, Yu, Xia, Wang, Zhi Guo and Tong, Zhen (2011) Deformation Mechanism of Diamond Nanocutting Single-Crystal Copper Using Molecular Dynamics Simulatio. Advanced Materials Research, 239-42. pp. 2775-2778. ISSN 1662-8985

Chen, Wen-hua, Chen, Xun and Xu, Zhijie (2011) Proceedings of the 17th International Conference on Automation & Computing. University of Huddersfield. ISBN 9781862180987

Chen, Xun (2011) Precision abrasive machining technology. In: Precision Abrasive Machining Technology Seminar, 13 January 2011, Heriot-Watt University. (Unpublished)

Cheng, Zhe, Hu, Niaoqing, Gu, Fengshou and Qin, Guojun (2011) Pitting damage levels estimation for planetary gear sets based on model simulation and grey relational analysis. Transactions of the Canadian Society for Mechanical Engineering, 35 (3). pp. 403-417. ISSN 0315-8977

Colley, Gareth and Mishra, Rakesh (2011) Computational flow field analysis of a Vertical Axis Wind Turbine. In: International Conference on Renewable Energies and Power Quality (ICREPQ'11), 13-15 April 2011, Las Palmas de Gran Canaria, Spain. (Submitted)

Colley, Gareth and Mishra, Rakesh (2011) Performance characteristics of a Vertical Axis Wind Turbine (VAWT) under transient conditions. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management. COMADEM, Stavanger, Norway. ISBN 0954130723

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2011) Diesel engine lubricating oil condition and performance monitoring using acoustic emission measurements. In: 24th International Congress on Condition Monitoring and Diagnostics Engineering Management (COMADEM 2011), 30th May - 1st June 2011, Stavanger, Norway. (Unpublished)

Feng, Li, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2011) Integrated tactile-optical coordinate measuring system. In: University of Huddersfield Annual Research Festival School of Computing and Engineering, March 2011, University of Huddersfield. (Submitted)

Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2011) Hot Judder - An Investigation of the Thermo-Elastic and Thermo-Plastic Effects during Braking. In: SAE 2011 Noise and Vibration Conference and Exhibition Proceedings. SAE. ISBN 978-0-7680-6433-9

Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2011) Hot Judder - An Investigation of the Thermo-Elastic and Thermo-Plastic Effects during Braking. SAE International Journal of Passenger Cars- Mechanical Systems, 4 (2). pp. 1086-1101. ISSN 1946-3995

Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2011) The Influence of Pad Abutment on Brake Noise Generation. In: SAE 2011 Noise and Vibration Conference and Exhibition Proceedings. SAE. ISBN 978-0-7680-6433-9

Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2011) The Influence of Pad Abutment on the Generation of Brake Noise. International Journal of Vehicle Structures & Systems, 3 (1). ISSN 0975-3060

Goel, Saurav, Luo, Xichun, Reuben, R.L., Bin Rashid, Waleed and Sun, Ji Ning (2011) Simulation Study of Cutting Forces, Stresses and Temperature during Nanometric Cutting of Single Crystal Silicon. Key Engineering Materials, 496. pp. 223-228. ISSN 1662-9795

Goel, Saurav, Luo, Xichun, Reuben, R.L., Bin Rashid, Waleed and Sun, Ji Ning (2011) Single Point Diamond Turning of Single Crystal Silicon Carbide: Molecular Dynamic Simulation Study. Key Engineering Materials, 496. pp. 150-155. ISSN 1662-9795

Goel, Saurav, Luo, Xichun, Reuben, Robert L and Rashid, Waleed (2011) Atomistic aspects of ductile responses of cubic silicon carbide during nanometric cutting. Nanoscale Research Letters, 6 (1). p. 589. ISSN 1556-276X

Haram, Mansaf, Wang, Tie, Gu, Fengshou and Ball, Andrew (2011) An Investigation of the Electrical Response of A Variable Speed Motor Drive for Mechanical Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 867-874. ISBN 0954130723

Herapath, Colin, Barrans, S M and Weston, W (2011) A Comparison of Design Methodologies for Journal Bearings under Pulsatile Loads. In: International Conference on Renewable Energies and Power Quality (ICREPQ'11), 13-15 April 2011, Las Palmas de Gran Canaria, Spain.

Hoa, Peng-Ching, Yap, Yit-Fatt, Nguyen, Nam-Trung and Chai, John (2011) Thermally Mediated Droplet Formation at a Microfluidic T-Junction. Micro and Nanosystems, 3 (1). pp. 65-75. ISSN 18764029

Hu, L., Hu, G., Qin, F. and Gu, Fengshou (2011) Turbopump Condition Monitoring Using Incremental Clustering and One-class Support Vector Machine. Chinese Journal of Mechanical Engineering, 24 (3). pp. 474-479. ISSN 1000-9345

Jiang, Xiang, Cooper, Philip and Scott, Paul J. (2011) Freeform surface filtering using the diffusion equation. Proceedings of the Royal Society, A, 467 (2127). pp. 841-859. ISSN 1364-5021

Jiang, Xiang, Lou, Shan and Scott, Paul J. (2011) Morphological method for surface metrology and dimensional metrology based on the alpha shape. Measurement Science and Technology, 23 (1). 015003. ISSN 0957-0233

Jiang, Xiang and Martin, Haydn (2011) Phase feedback fibre interferometer for surface profiling. International Journal of Precision Technology, 2 (2/3). pp. 246-265. ISSN 1755-2060

Jiang, Xiang, Zeng, Wenhan and Scott, Paul J. (2011) Wavelet Analysis for the Extraction of Morphological Features for Orthopaedic Bearing Surfaces. In: Progress in Molecular and Environmental Bioengineering - From Analysis and Modeling to Technology Applications. InTech, London. ISBN 9789533072685

Johnson, Anthony and Unver, Ertu (2011) The Conceptual Design of a Kinetic Energy Storage Device to Store 20 KWh of Energy. Research Report. University of Huddersfield Confidential Feasibility Report, Huddersfield, UK. (Unpublished)

Kubiak, Krzysztof, Liskiewicz, T.W. and Mathia, T.G. (2011) Surface morphology in engineering applications: Influence of roughness on sliding and wear in dry fretting. Tribology International, 44 (11). pp. 1427-1432. ISSN 0301-679X

Kubiak, Krzysztof, Wilson, M. C. T., Mathia, T. G. and Carras, S. (2011) Dynamics of contact line motion during the wetting of rough surfaces and correlation with topographical surface parameters. Scanning, 33 (5). pp. 370-377. ISSN 0161-0457

Kubiak, Krzysztof, Wilson, M.C.T., Mathia, T.G. and Carval, Ph. (2011) Wettability versus roughness of engineering surfaces. Wear, 271 (3-4). 523 - 528. ISSN 0043-1648

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2011) A fast and effective way to improve the merging accuracy of multi-view point cloud data. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield, UK, pp. 18-21. ISBN 978-1-86218-098-7

Liang, Yingchun, Liu, Jingshi, Sun, Yazhou, Lu, Lihua and Tong, Zhen (2011) Computational Fluid Dynamics Analysis of an Aerostatic Journal Bearing with Slot-Entry Restrictors. Advanced Science Letters, 4 (8-10). pp. 2817-2821. ISSN 1936-6612

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2011) Morphological Filters Based on Motif Combination for Functional Surface Evaluation. In: Proceedings of the 17th International Conference on Automation & Computing, 10 September 2011, University of Huddersfield, Huddersfield.

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2011) Fast Algorithm for Morphological Filters. Journal of Physics: Conference Series, 311. p. 284. ISSN 1742-6596

Lucas, Gary, Zhao, Xin and Pradhan, Suman (2011) Optimisation of four-sensor probes for measuring bubble velocity components in bubbly air–water and oil–water flows. Flow Measurement and Instrumentation, 22 (1). pp. 50-63. ISSN 0955-5986

Luo, Xichun, Sun, Jining, Ritchie, James M., Chang, Wenlong and Wang, Wei (2011) Deterministic fabrication of nanostructures for plasmonic lens by focused ion beam. The International Journal of Advanced Manufacturing Technology, 57 (9-12). pp. 1003-1009. ISSN 0268-3768

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2011) Efficient thermal error prediction in a machine tool using finite element analysis. Measurement Science and Technology, 22 (8). 085107. ISSN 0957-0233

Muller, Matthias, Barrans, Simon and Blunt, Liam (2011) Predicting Plastic Deformation and Work Hardening during V-Band Formation. Journal of Materials Processing Technology, 211 (4). pp. 627-636. ISSN 0924-0136

Müller, Matthias (2011) Predicting the Ultimate Axial Load Capacity of Joints formed using V-Band Retainers. Doctoral thesis, University of Huddersfield.

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew, Fengshou, Gu and Anyakwo, Arthur (2011) Predictive Control Strategies Used to Solve Challenges Related to Modern Railway Vehicles. In: 5th IET Conference on Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 29-30 November 2011, Derby Conference Centre, UK.

Opoz, Tahsin Tecelli and Chen, Xun (2011) Single Grit Grinding Simulation by Using Finite Element Analysis. Advances in Materials and Processing Technologies AMPT2010 International Conference, 1315 (1). pp. 1467-1472.

Parkinson, Simon, Longstaff, Andrew P., Allen, Gary, Crampton, Andrew, Fletcher, Simon and Myers, Alan (2011) Hierarchical Task Based Process Planning For Machine Tool Calibration. Proceedings of The 29th Workshop of the UK Planning and Scheduling Special Interest Group (PlanSIG2011). pp. 53-60. ISSN 1368-5708

Parkinson, Simon, Longstaff, Andrew P., Crampton, Andrew, Fletcher, Simon, Allen, Gary and Myers, Alan (2011) Representing the Process of Machine Tool Calibration in First-order Logic. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield, UK. ISBN 978-1-86218-098-7

Parkinson, Simon, Longstaff, Andrew P., Fletcher, Simon, Allen, Gary, Crampton, Andrew and Myers, Alan (2011) Controlling Machine Tool Accuracy Through a Robust Calibration Process. In: Yorkshire and North East Vitae Public Engagement Competition, 6th April 2011, Durham town hall. (Unpublished)

Parkinson, Simon, Longstaff, Andrew P., Fletcher, Simon, Crampton, Andrew, Allen, Gary and Myers, Alan (2011) Cryptographic Techniques in Metrology Software. In: University of Huddersfield Annual Research Festival School of Computing and Engineering 12th March 2010, Friday 12th March 2010, University of Huddersfield. (Submitted)

Pen, H.M., Liang, Y.C., Luo, Xichun, Bai, Q.S., Goel, S. and Ritchie, J.M. (2011) Multiscale simulation of nanometric cutting of single crystal copper and its experimental validation. Computational Materials Science, 50 (12). pp. 3431-3441. ISSN 09270256

Radhi, H.E. and Barrans, Simon (2011) Comparison between Multiobjective Population-Based Algorithms in Mechanical Problem. Applied Mechanics and Materials, 110-16. pp. 2383-2389. ISSN 1662-7482

Raharjo, Parno, Abdusslam, S.A., Gu, Fengshou, Wang, Tie and Ball, Andrew (2011) An Investigation of Acoustic Emission Responses of a Self Aligning Spherical Journal Bearing. In: The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM/MFPT 2011, 20th - 22nd June 2011, Cardiff, UK. (Unpublished)

Raharjo, Parno, Abdusslam, S.A., Wang, Tie, Gu, Fengshou and Ball, Andrew (2011) An Investigation of Acoustic Emission Responses of a Self Aligning Spherical Journal Bearing. In: The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM/MFPT 2011, 20th - 22nd June 2011, Cardiff, UK.

Singh, D., Fieldhouse, John D., Jain, A.K., Singh, Nishan, Tyagi, M.R. and Singal, S.K. (2011) Investigating the Effect of Engine Operating Variables and Engine Lubricant Viscosity on Engine Friction- A DOE Approach. In: 16th Asia Pacific Automotive Engineering Conference (APAC), 6th - 8th October 2011, Chennai, India. (Unpublished)

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2011) Combustion Characteristics of CI Engine Running with Biodiesel Blends. In: International Conference on Renewable Energies and Power Quality (ICREPQ'11), 13-15 April 2011, Las Palmas de Gran Canaria, Spain.

Tesfa, Belachew, Mishra, Rakesh, Zhang, Cuiping, Gu, Fengshou and Ball, Andrew (2011) NOx Prediction Based on Cylinder Pressure Measurement for Engine Emission Monitoring. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management. COMADEM, Norway, p. 212. ISBN 0954130723

Tesfa, Belachew, Mishra, Rakesh, Zhang, Cuiping, Gu, Fengshou and Ball, Andrew (2011) NOx Prediction Based on Cylinder Pressure Measurement for Engine Emission Monitoring. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 1330-1340. ISBN 0954130723

Tesfa, Belachew Chekene (2011) Investigations into the Performance and Emission Characteristics of a Biodiesel Fuelled CI Engine under Steady and Transient Operating Conditions. Doctoral thesis, University of Huddersfield.

Thomas, T.R., Rosén, B.-G., Zahouani, H., Blunt, Liam and Mansori, M. El (2011) Traceology, quantifying finishing machining and function: a tool and wear mark characterisation study. Wear, 271 (3/4). pp. 553-558. ISSN 00431648

Tian, Y., Wang, Jian, Peng, Z. and Jiang, Xiang (2011) Numerical analysis of cartilage surfaces for osteoarthritis diagnosis using field and feature parameters. Wear, 271 (9-10). pp. 2370-2378. ISSN 0043-1648

Tran, Van Tung (2011) Intelligent Fault Diagnosis System using BEMD based Thermal Image Enhancement And Support Vector Machines. In: International Symposium on Mechatronics and Robotics, 27-28 October 2011, Hochiminh City, Vietnam.

Tran, Van Tung (2011) Wireless Condition-based Maintenance System for Rotating Machinery. In: International Symposium on Mechatronics and Robotics, 27-28 October 2011, Hochiminh City, Vietnam.

Vishnyakov, V.M., Ehiasarian, A.P., Vishnyakov, Vladimir, Hovsepian, P. and Colligon, John (2011) Amorphous Boron containing silicon carbo-nitrides created by ion sputtering. Surface and Coatings Technology, 206 (1). pp. 149-154. ISSN 0257-8972

Wang, Jian, Jiang, Xiangqian, Blunt, Liam, Leach, Richard K. and Scott, Paul J. (2011) Efficiency of adaptive sampling in surface texture measurement for structured surfaces. In: The 13th International Conference on Metrology and Properties of Engineering Surfaces, 12-15 April 2011, National Physical Laboratory, Teddington, UK.

Wang, Jian, Jiang, Xiangqian, Gurdak, Elzbieta, Scott, Paul J., Leach, Richard, Tomplins, Paul and Blunt, Liam (2011) Numerical characterisation of biomedical titanium surface texture using novel feature parameters. Wear, 271 (7-8). pp. 1059-1065. ISSN 0043-1648

Wright, Daniel (2011) Introduction of a Semi Automatic Quality Control Process into an SME. Masters thesis, University of Huddersfield.

Zeng, Shengye, Blunt, Liam and Jiang, Xiang (2011) The application of Taguchi approach to optimise the processing conditions on bonnet polishing of CoCr. Key Engineering Materials, 496. pp. 235-240. ISSN 1013-9826

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2011) A Generalised Linear and Nonlinear Spline filter. Wear, 271 (3/4). pp. 544-547. ISSN 0043-1648

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2011) Roundness filtration by using robust regression filter. Measurement Science and Technology, 22 (3). 035108. ISSN 0957-0233

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) A Minimax Fitting Algorithm for Ultra-Precision Aspheric Surfaces. In: The 13th International Conference on Metrology and Properties of Engineering Surfaces, 12-15 April 2011, National Physical Laboratory, Teddington, UK. (Unpublished)

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) A Reliable Method of Minimum Zone Evaluation of Cylindricity and Conicity from Coordinate Measurement Data. Precision Engineering, 35 (3). pp. 484-489. ISSN 0141-6359

Zhen, Dong, Gu, Fengshou, Zhou, Xiaojun and Ball, Andrew (2011) Fault Signal Enhancement using Adaptive Filtering Techniques for Gearbox Monitoring. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 251-258. ISBN 0954130723

Öpöz, Tahsin Tecelli and Chen, Xun (2011) Influential Parameters in Determination of Chip Shape in High Speed Machining. Key Engineering Materials, 496. pp. 211-216. ISSN 1013-9826

2010

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2010) Learning and Teaching Mechanical Engineering Courses with Blended Learning Environment - Higher Order Application of Bloom’s Taxonomy. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 84-91. ISBN 9781862180932

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2010) Teachers’ Attitude towards Integration of Computer Assisted Instructions in Teaching and Learning Process in CAD/CAM/CNC Module. International Journal of Learning, 16 (12). pp. 137-147. ISSN 1447-9494

Abdulrasool, Salah Mahdi, Mishra, Rakesh and Khalaf, Haifa (2010) Teachers’ and Students' Attitudes Towards Traditional and Computer Assisted Blended Teaching and Learning Processes in Mechanical Engineering Subjects Area. In: Proceedings of the 10th IEEE International Conference on Computer and Information Technology. IEEE Computer Society Conference Publishing Services (CPS), pp. 1436-1441. ISBN 9780769541082

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Khalaf, Haifa and Al Seddiqi, Mohamed (2010) The Effect of Using Computer Technology Tools to Enhance the Teaching-Learning Process in CAD-CAM-CNC Module in Mechanical Engineering Subject Area. In: Global Learn Asia Pacific 2010: Global Conference on Learning and Technology. Association for the Advancement of Computing in Education (AACE), Vancouver, Canada, p. 9. ISBN 1-880094-79-7

Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2010) Bearing fault diagnosis using time encoded signal processing and recognition. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Abuhabaya, Abdullah and Fieldhouse, John D. (2010) Variation of Engine Performance and Emissions using Ethanol Blends. In: Proceedings of the 14th International Conference on Machine Design and Production. The 14th International Conference on Machine Design and Production, Volume . Publisher UMTIK, The 14th International Conference on Machine Design and Production. Güzelyurt, Turkish Republic of Northern Cyprus. ISBN ISBN 978-975-429-282-4

Abuhabaya, Abdullah and Fieldhouse, John D. (2010) Variation of Engine Performance and Emissions using Ethanol Blends. In: Proceedings of the 36th MATADOR International Conference. Springer, London Dordrecht Heidelberg, New York., Manchester University, pp. 413-416. ISBN 978-1-84996-431-9

Abuhabaya, Abdullah and Fieldhouse, John D. (2010) Variation of Engine Performance and Emissions using Ethanol Blends. In: 36th International MATADOR Conference 2010, 14th - 16th July 2010, Manchester, UK. (Submitted)

Abuhabaya, Abdullah, Fieldhouse, John D. and Brown, D.R. (2010) Variation of Engineering Performance and Emissions using Biodiesel Fuels. In: 2nd International Conference on Nuclear and Renewable Energy Sources, 4th-7th July 2010, Ankara, Turkey.

Ahmed, Mahmud and Gu, Fengshou (2010) Fault classification using an Artificial Neural Network based on Vibrations from a Reciprocating Compressor. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 92-97. ISBN 9781862180932

Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2010) The monitoring of cavitation in centrifugal pumps based on the analysis of vibro-acoustic measurements. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Al-Arbi, Salem, Talbot, Chris J., Wang, Tie, Fengshou, Gu and Ball, Andrew (2010) Characterization of vibration transmission paths for gearbox condition monitoring. In: Inter noise 2010 39th International congress on Noise Control Engineering, 13-16 June 2010, Lisbon, Portugal.

Albarbar, A., Gu, Fengshou and Ball, Andrew (2010) Diesel engine fuel injection monitoring using acoustic measurements and independent component analysis. Measurement, 43 (10). pp. 1376-1386. ISSN 0263-2241

Albarbar, A., Gu, Fengshou, Ball, Andrew and Starr, A. (2010) Acoustic monitoring of engine fuel injection based on adaptive filtering techniques. Applied Acoustics, 71 (12). pp. 1132-1141. ISSN 0003-682X

Arebi, Lufti, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Investigation of Wireless Sensor Deployed on a Rotating Shaft and Its Potential for Machinery Condition Monitoring. In: 23rd International Congress on Condition Monitoring and diagnostic Engineering Management, June 28-July 2, 2010, Japan. (Unpublished)

Arebi, Lufti, Gu, Fengshou and Ball, Andrew (2010) Rotor Misalignment Detection using a Wireless Sensor and a Shaft Encoder. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 6-13. ISBN 9781862180932

Arebi, Lufti, Gu, J., Ball, Andrew and Gu, Fengshou (2010) Investigation of a Rotating Shaft with a Novel Integrated Wireless Accelerometer. In: The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England, UK.

Arief, Ikhwan and Chen, Xun (2010) Key Parameters In Loose Abrasive Machining. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 1-5. ISBN 9781862180932

Baqqar, Mabrouka, Gu, Fengshou and Lu, Joan (2010) Machine Performance and Condition Monitoring Through Data Mining and Database Optimization. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 186. ISBN 9781862180932

Bhat, N, Barrans, S M, Narasimhan, R, Kumar, A S and Low, T C (2010) Static and dynamic analyisis of inherently compensated aerostatic flat pad bearings. In: ASME 2010 International Mechanical Engineering Congress & Exposition, 12 - 18 November 2010, Vancouver, British Columbia, Canada.

Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X

Bills, Paul J., Underwood, R.J., Cann, P., Hart, A, Jiang, Xiangqian and Blunt, Liam (2010) What is required to measure the wear of explanted metal-on-metal hips? In: British Orthopaedic Research Society Annual Meeting, 12th-13th July 2010, Cardiff University.

Blunt, Liam and Li, T. (2010) Evaluation of Measurement Uncertainty. Quality Manufacturing Today (March).

Borisov, Oleg, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2010) Efficient Machine Error Measurement. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932

Bryant, David (2010) Thermo-elastic Deformation of a Vented Brake Disc. Doctoral thesis, University of Huddersfield.

Charles, P., Sinha, Jyoti K., Gu, Fengshou and Ball, Andrew (2010) Application of novel polar representation method for monitoring minor engine condition variations. Mechanical Systems and Signal Processing, 24 (3). pp. 841-843. ISSN 0888-3270

Chen, J. X., Liang, Y. C., Yuan, X., Wang, Z.G. and Tong, Zhen (2010) MD simulation of nanocutting process: removal mechanism, defects evolvement, and characterization</title>. Proceedings of SPIE, 7655. 76550J-76550J. ISSN 0277-786X

Chen, Xiaomei, Wan, Yu, Koenders, Ludger and Schilling, Meinhard (2010) Measurements of dimensional standards and etalons with feature size from tens of micrometres to millimetres by using sensor strengthened nanomeasuring machine. Measurement, 43 (10). pp. 1369-1375. ISSN 02632241

Chen, Xun and Opoz, Tahsin Tecelli (2010) Simulation of Grinding Surface Creation – A Single Grit Approach. Advanced Materials Research, 126-28. pp. 23-28. ISSN 1662-8985

Chen, Xun and Opoz, Tahsin Tecelli (2010) Simulation of Grinding Surface Creation – A Single Grit Approach. In: The 13th International Symposium on Advances in Abrasive Technology (ISAAT 2010), 19-22 September 2010, Taipei, Taiwan.

Clough, David A, Fletcher, Simon and Longstaff, Andrew P. (2010) Non-contact measurement and analysis of machine tool spindles. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 189. ISBN 9781862180932

Colley, Gareth, Mishra, Rakesh, Rao, Vasu and Woolhead, R. (2010) Effect of rotor blade position on Vertical Axis Wind Turbine performance. Proceedings of the International Conference on Renewable Energies and Power Quality (ICREPQ’10) Granada (Spain), 23th to 25th March, 2010.

Elamin, Fathi (2010) Detection of Diesel Engine Injector Faults Using Acoustic Emissions. In: University of Huddersfield Research Festival 2010, 8-18 March 2010, University of Huddersfield. (Unpublished)

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Detection of Diesel Engine Injector Faults Using Acoustic Emissions. In: COMADEM 2010: Advances in Maintenance and Condition Diagnosis Technologies towards Sustainable Society, 28th June-2nd July 2010, Nara, Japan. (Unpublished)

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Diesel Engine Valve Clearance Detection Using Acoustic Emission. Advances in Mechanical Engineering, 2010. ISSN 1687-8132

Elamin, Fathi, Glikes, O., Gu, Fengshou and Ball, Andrew (2010) The Analysis of Acoustic Emission Signals from the Cylinder Head of a Diesel Engine for Fault Detection. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2010) Diesel Engine Injector Faults Detection Using Acoustic Emissions Technique. Modern Applied Science, 44 (9). pp. 3-13. ISSN 1913-1844

Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Modelling acoustic emissions generated by sliding friction. Wear, 268 (5-6). pp. 811-815. ISSN 0043-1648

Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2010) Investigation of brake squeal and the influence of the abutment faces. In: Proceedings of 6th European Conference on Braking, JEF 2010. European Conference on Braking . Groupement Regional Nord/Pas-de-Calais pour la Recherche dans les Transports, Universite de Lille 1, France, pp. 255-262.

Finn, Paul H. and Horler, Greg (2010) Apparatus and Method for Controlling a Multi-fuel Engine. WO/2010/125396.

Holmes, Violeta and Kureshi, Ibad (2010) Huddersfield University Campus Grid: QGG of OSCAR Clusters. Journal of Physics: conference series, 256 (1). 012022. ISSN 1742-6596

Jiang, Xiang (2010) Robust solution for the evaluation of stratified functional surfaces. CIRP Annals - Manufacturing Technology, 59 (1). pp. 573-576. ISSN 0007-8506

Jiang, Xiang, Gao, F. and Mateboer, A. (2010) An approach of assessment for ultra-precision V-groove structured surfaces. In: Proceedings of the euspen International Conference – Delft - June 2010. European Society for Precision Engineering & Nanotechnology, Delft, Netherlands.

Jiang, Xiang, Gao, F. and Wang, Kaiwei (2010) Wavelength Scanning Interferometer for Structured Surfaces. In: ASPE Summer Topical Meeting on Precision Interferometric Metrology, 23rd - 25th June 2010, Asheville, North Carolina, USA.

Jiang, Xiang, Wang, Kaiwei, Gao, F. and Muhamedsalih, Hussam (2010) Fast surface measurement using wavelength scanning interferometry with compensation of environmental noise. Applied Optics, 49 (15). pp. 2903-2909. ISSN 1559-128X

Jiang, Xiang, Zhang, Xiangchao and Scott, Paul J. (2010) Template matching of freeform surfaces based on orthogonal distance fitting for precision metrology. Measurement Science and Technology, 21 (4). 045101. ISSN 0957-0233

Kinnear, D., Mishra, Rakesh, Weston, Bill and Padgett, C. (2010) A Design Methodology for the Prediction of Squeeze Film Stiffness and Damping Characteristics in Hybrid Journal Bearings under Pulsatile Load Conditions. International Conference on Renewable Energies and Power Quality (ICREPQ’10) Granada (Spain), 23rd to 25th March, 2010.

Kong, L., Cheung, B., Jiang, Xiang, Lee, W., To, S., Blunt, Liam and Scott, Paul J. (2010) Characterization of Surface Generation of Optical Microstructures Using a Pattern and Feature Parametric Analysis Method. Precision Engineering, 34 (4). pp. 755-766. ISSN 0141-6359

Kubiak, Krzysztof, Mathia, T.G. and Fouvry, S. (2010) Interface roughness effect on friction map under fretting contact conditions. Tribology International, 43 (8). 1500 - 1507. ISSN 0301-679X

Leach, Richard K., Li, Tukun, Jiang, Xiang and Blunt, Liam (2010) Comparison of commercial software packages for calculating surface texture parameters. In: Proceedings of the euspen International Conference, Monday 31st May - Friday 4th June 2010, Delft, Holland. (Submitted)

Leong, K.C., Li, H.Y., Jin, L.W. and Chai, John (2010) Numerical and experimental study of forced convection in graphite foams of different configurations. Applied Thermal Engineering, 30 (5). pp. 520-532. ISSN 13594311

Li, H.Y., Leong, K.C., Jin, L.W. and Chai, John (2010) Analysis of fluid flow and heat transfer in a channel with staggered porous blocks. International Journal of Thermal Sciences, 49 (6). pp. 950-962. ISSN 12900729

Li, H.Y., Leong, K.C., Jin, L.W. and Chai, John (2010) Three-dimensional numerical simulation of fluid flow with phase change heat transfer in an asymmetrically heated porous channel. International Journal of Thermal Sciences, 49 (12). pp. 2363-2375. ISSN 12900729

Li, H.Y., Leong, K.C., Jin, L.W. and Chai, John (2010) Transient behavior of fluid flow and heat transfer with phase change in vertical porous channels. International Journal of Heat and Mass Transfer, 53 (23-24). pp. 5209-5222. ISSN 0017-9310

Li, H.Y., Leong, K.C., Jin, L.W. and Chai, John (2010) Transient two-phase flow and heat transfer with localized heating in porous media. International Journal of Thermal Sciences, 49 (7). pp. 1115-1127. ISSN 12900729

Lu, Wenlong, Jiang, Xiang, Qi, Qufen and Scott, Paul J. (2010) Modeling the integration between specifications and verification for cylindricity based on category theory. Measurement Science and Technology, 21 (11). ISSN 0957-0233

Lu, Wenlong, Liu, Xiaojun, Jiang, Xiangqian, Qi, Qunfen and Scott, Paul J. (2010) Categorical data modelling for Cylindricity Consistent with Geometrical Product Specifications Standard System. Proceedings of SPIE: Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 75446S. ISSN 1996-756X

Lucas, Gary and Leeungculsatien, Teerachai (2010) A New Method of Measuring Velocity Profiles using a MultiElectrode Electromagnetic Flow Meter. In: 6th World Congress on Industrial Process Tomography, 6-9 September 2010, Beihang Conference Center, Beihang University, China.

Malviya, Vihar, Mishra, Rakesh and Palmer, Edward (2010) CFD Investigation on 3-Dimensional Interference of a Five-Hole Probe in an Automotive Wheel Arch. Advances in Mechanical Engineering, 2010. pp. 1-19. ISSN 1687-8132

Martin, Haydn and Jiang, Xiang (2010) Rapid phase shifting fiber interferometer with optical stylus. Optical Letters, 35 (5). pp. 655-657. ISSN 0146-9592

Meriaux, J., Fouvry, S., Kubiak, Krzysztof and Deyber, S. (2010) Characterization of crack nucleation in TA6V under fretting-fatigue loading using the potential drop technique. International Journal of Fatigue, 32 (10). 1658 - 1668. ISSN 0142-1123

Mian, Naeem S. (2010) Efficient machine tool thermal error modelling strategy for accurate offline assessment. Doctoral thesis, University of Huddersfield.

Muller, Matthias and Barrans, Simon (2010) Impact of flange geometry on the ultimate axial load capacity of V-band clamps. In: Conference papers: 9th International Conference on Turbochargers and Turbocharging. Institution of Mechanical Engineers, London, pp. 183-192. ISBN 978-1-907599-15-6

Muller, Matthias and Barrans, Simon (2010) Predicting and determining the contact pressure distribution in joints formed by v-band clamps. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 154-159. ISBN 9781862180932

Oluwajobi, Akinjide O. and Chen, Xun (2010) The Effect of Interatomic Potentials on Nanometric Abrasive Machining. In: Proceedings of the 16th International Conference on Automation & Computing, University of Birmingham, Birmingham, UK, 11 September 2010. Chinese Automation and Computing Society in the UK, pp. 130-135. ISBN 9780955529368

Oluwajobi, Akinjide O. and Chen, Xun (2010) On Minimum Depth of Cut in nanomachining. In: Advances in manufacturing technology. Durham University and Glasgow Caledonian University, Durham, pp. 174-179. ISBN 9781905866519

Oluwajobi, Akinjide O. and Chen, Xun (2010) The effect of tool geometry on rubbing and ploughing phenomena in nano abrasive machining. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 160-165. ISBN 9781862180932

Oluwajobi, Akinjide O. and Chen, Xun (2010) The fundamentals of modelling abrasive machining using molecular dynamics. International Journal of Abrasive Technology, 3 (4). pp. 354-381. ISSN 1752-2641

Opoz, Tahsin Tecelli and Chen, Xun (2010) Finite element simulation of chip formation. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 166-171. ISBN 9781862180932

Opoz, Tahsin Tecelli and Chen, Xun (2010) An Investigation of the Rubbing and Ploughing in Single Grain Grinding using Finite Element Method. In: 8th international Conference on Manufacturing Research, 14-16 Sept 2010, Durham, UK.

Opoz, Tahsin Tecelli and Chen, Xun (2010) Material removal phases in single abrasive grain grinding. In: AMPT 2010, October 24-27, Paris. (Unpublished)

Opoz, Tahsin Tecelli and Chen, Xun (2010) Numerical Simulation of Single Grit Grinding. In: Proceeding of the 16th International Conference on Automation & Computing, 11 Sept 2010, Birmingham, UK.

Parkinson, Simon, Longstaff, Andrew P., Fletcher, Simon, Allen, Gary, Crampton, Andrew and Myers, Alan (2010) A novel framework for establishing a machine tool quality metric. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932

Perkins, Chris J, Longstaff, Andrew P., Fletcher, Simon, Willoughby, P and Verma, Rocky (2010) Limitations of Data Handling within the Machine Tool Service environment. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 192. ISBN 9781862180932

Pillutla, G., Mishra, Rakesh, Barrans, Simon and Barrans, John (2010) Evaluation of Loss Coefficient For Stand Alone Radiator. In: International Conference on Renewable Energy and Power Quality (ICREPQ'10), 23rd - 25th March 2010, Granada.

Qi, Qunfen, Jiang, Xiangqian, Liu, Xiaojun and Scott, Paul J. (2010) An unambiguous expression method of the surface texture. Measurement, 43 (10). pp. 1398-1403. ISSN 0263-2241

Radhi, H.E. and Barrans, Simon (2010) Finite Element Analysis of Effect of Weld Toe Radius and Plate Thickness on Fatigue Life of Butt Welded Joint. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 60-64. ISBN 9781862180932

Raharjo, Parno, Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2010) Early Failure Detection and Diagnostics of High Speed Self Aligning Journal Bearing. In: COMADEM 2010, June 28-July 2 2010, Nara, Japan. (Unpublished)

Raharjo, Parno, Gu, J., Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Early Failure Detection and Diagnostics of Self-Aligning Journal Bearing through Vibro-acoustic Analysis. In: CM 2010 and MFPT 2010 The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, England. (Unpublished)

Shao, Yimin, Tu, Wenbing and Gu, Fengshou (2010) A Simulation Study of Defects in a Rolling Element Bearing using FEA. In: International Conference on Control, Automation and Systems 2010, 27th - 30th October 2010, Gyeonggi-do, Korea. (Unpublished)

Shi, John Z., Legate, I., Gu, Fengshou, Fieldhouse, John D. and Ball, Andrew (2010) Prediction of antilock braking system condition with the vehicle stationary using a model-based approach. International Journal of Automotive Technology, 11 (3). pp. 363-373. ISSN 1229-9138

Shi, John Z., Palmer, R. and Beyani, H. (2010) Performance evaluation of suspension malfunctions in a student formula car using ADAMS model. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Singh, D., Elamin, Fathi, Gu, Fengshou, Gilkes, Oliver S., Fieldhouse, John D., Jain, A.K., Singh, Nishan and Singal, S.K. (2010) Study of friction characteristics of a diesel engine running on different viscosity grade engine oils using conventional and acoustic emissions technique. In: 7th International Conference on Industrial Tribology (ICIT 2010), 2nd - 4th December 2010, Ranchi, India. (Unpublished)

Talbot, Chris J., Fieldhouse, John D. and Bryant, David (2010) An investigation of frictional vibration between pad and calliper in the generation of disk brake squeal. In: INTER-NOISE 2010, the 39th International Congress and Exposition on Noise Control Engineering, 13-16 June 2010, Lisbon, Portugal. (Unpublished)

Tesfa, Belachew, Mishra, Rakesh and Gu, Fengshou (2010) Behavior of a CI Engine Running by Biodiesel under Transient Conditions. In: General Emisions. SAE Special Publication Papers SP, 2010 (2290). SAE International, Michigan, USA.

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Powles, Nicholas (2010) Prediction Models for Density and Viscosity of Biodiesel and their Effects on Fuel Supply System in CI Engines. Renewable Energy, 35 (12). pp. 2752-2760. ISSN 0960-1481

Tran, Van Tung (2010) A Classification and regression trees (CART) model of parallel structure and long-term prediction prognosis of machine condition. Structural Health Monitoring, 9 (2). pp. 121-132. ISSN 1741-3168

Tran, Van Tung (2010) Development of intelligent techniques for machine prognostics. In: International Symposium on Advanced Mechanical and Power Engineering, 11-13 Nov. 2010, Fukui, Japan.

Tran, Van Tung (2010) Machine performance degradation assessment and remaining useful life prediction using proportional hazard model and SVM. In: World Congress on Engineering Asset Management, 25-27 Oct., 2010, Brisbane, Queensland, Australia.

Tran, Van Tung, Pham, Hong Thom and Yang, Bo-Suk (2010) An improved hybrid of nonlinear autoregressive with exogenous input and autoregressive moving average for long-term machine state forecasting based on vibration signal. Expert Systems With Applications, 37 (4). pp. 3310-3317. ISSN 0957-4174

Tran, Van Tung and Yang, Bo-Suk (2010) Machine fault diagnosis and condition prognosis using classification and regression trees and neuro-fuzzy inference systems. Control and Cybernetics, 39 (1). pp. 25-54. ISSN 0324-8569

Wilkinson, Adam, Chen, Xun and Blunt, Liam (2010) Experimentation to Reduce Friction from Novel Abrasive Tape Polishing Method. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 54-59. ISBN 9781862180932

Willoughby, P, Verma, M, Longstaff, Andrew P. and Fletcher, Simon (2010) A Holistic Approach to Quantifying and Controlling the Accuracy, Performance and Availability of Machine Tools. In: Proceedings of the 36th International MATADOR Conference. Springer, London, UK, pp. 313-316. ISBN 978-1-84996-431-9

Xu, Bin, Wong, Teck Neng, Nguyen, Nam-Trung, Che, Zhizhao and Chai, John (2010) Thermal mixing of two miscible fluids in a T-shaped microchannel. Biomicrofluidics, 4 (4). 044102. ISSN 1932-1058

Yang, Li, Wang, Zhiguo, Liang, Yingchun, Chen, Mingjun, Tong, Zhen, Chen, Jiaxuan, Namba, Yoshiharu, Walker, David D. and Li, Shengyi (2010) Analysis about diamond tool wear in nano-metric cutting of single crystal silicon using molecular dynamics method. Proceedings of SPIE, 7655. 76550O-76550O. ISSN 0277-786X

Yeung, Ka Yiu and Chen, Xun (2010) 3-D Fixture Layout Design System Based on Genetic Algorithm. Proceedings of the 16th International conference on Automation & Computing. pp. 238-243. ISSN 9780955529368

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2010) Fast algorithm of the Robust Gaussian Regression Filter for Areal Surface Analysis. Measurement Science and Technology, 21 (5). 055108. ISSN 0957-0233

Zhang, H., Shi, John Z., Gu, Fengshou and Ball, Andrew (2010) The bending vibration of a turbocharger under the influence of rotor imbalance. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Zhang, Hao, Shi, John Z., Gu, Fengshou and Ball, Andrew (2010) Bending vibration of an automotive turbocharger under the influence of rotor imbalance. In: CM 2010 and MFPT 2010 The 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England. (Unpublished)

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2010) Shape recognition and form error evaluation of quadric surfaces. In: Measurement Systems and Process Improvement (MSPI) 2010, 19-20, Apr, 2010, NPL, Teddington, UK. (Unpublished)

Zhao, Xin and Lucas, Gary (2010) Characterisation of the mean and time dependent properties of inclined oilinwater pipe flows using dualsensor probes. In: 6th World Congress on Industrial Process Tomography, 6-9 September 2010, Beihang Conference Center, Beihang University, China.

Zhen, Dong, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) A Study of Sound Source Characteristics in Active Noise Control and Fault Diagnosis. In: Inter noise 2010-39th International congress on Noise Control Engineering, 13-16 June 2010, Lisbon, Portugal. (Unpublished)

Zhen, Dong, Gu, Fengshou and Ball, Andrew (2010) The Study of Acoustic Source Localization using a Small Microphone Array for Condition Monitoring. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 14-19. ISBN 9781862180932

Zhen, Dong, James, Gu, Tie, Wang, Fengshou, Gu and Ball, Andrew (2010) Diagnostic Feature Development based on Dynamic Time Warping of Dynamic Signals under Variable Machine Operating Condition. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK.

2009

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2009) Teacher Attitudes toward and Perceptions of Mechanical Engineering Student Performance on CAD/CAM/CNC. In: Learning: the sixteenth international conference on Learning, 1-4 July 2009, University of Barcelona, Spain. (Unpublished)

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2009) Using Computer Technology Tools to Improve the Teaching-Learning Process in Technical and Vocational Education: Mechanical Engineering Subject Area. International Journal of Learning, 15 (12). pp. 155-168. ISSN 1447-9494

Al-Arbi, Salem, Gu, Fengshou, Guan, Luyang, Ball, Andrew and Naid, A. (2009) Gearbox Fault Diagnosis based on Vibration Signals Measured Remotely. Key Engineering Materials, 413-41. pp. 175-180. ISSN 1013-9826

Al-Hamad, Salah Madhi Ahmad (2009) A Study on Integration of Computer Assisted Instruction with a Traditional Teaching Learning Process in the Area of Mechanical Engineering Education. Masters thesis, University of Huddersfield.

Al-Hinai, Sulaiyam and Lucas, Gary (2009) An Impedance Cross Correlation (ICC) device for measuring solids velocity and volume fraction profiles in solids-water flows. In: What, Where, When: Multi-dimensional Advances for Industrial Process Monitoring International Symposium, Tuesday 23 - Wednesday 24 June 2009, Leeds, UK. (Unpublished)

Al-Hinai, Sulaiyam and Lucas, Gary (2009) A flowmeter for measuring the dispersed phase velocity in multiphase flow with non-uniform velocity profile. Journal of the Japanese Society of Experimental Mechanics, 9. pp. 7-12. ISSN 1346-4930

Al-Yarubi, Qahtan and Lucas, Gary (2009) Modelling and Measurements of Film Characteristics and Gas Core of Annular Flows. In: What, Where, When: Multi-dimensional Advances for Industrial Process Monitoring International Symposium, Tuesday 23 - Wednesday 24 June 2009, Leeds, UK. (Unpublished)

Alabed, Asmaa and Chen, Xun (2009) Development of a knowledge warehouse for grinding. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 99-104. ISBN 9781862180857

Alaiwi, A, Sibley, Martin J.N., Mather, Peter and Holmes, Violeta (2009) Extremely low frequency based communication link. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 105-110. ISBN 9781862180857

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter, Myers, Alan and Briggs, Jack (2009) A Low-cost Ultrasonic 3D Measurement Device for Calibration for Cartesian and Non-Cartesian Machines. Journal of the Japanese Society of Experimental Mechanics, 9 (S). pp. 77-80. ISSN 1346-4930

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Pislaru, Crinela, Myers, Alan and Briggs, Jack (2009) A high accuracy ultrasonic system for measurement of air temperature. In: Proceedings of the 9th International Conference - San Sebastian, Spain, 2009. EUSPEN, pp. 134-137. ISBN 978-0-9553082-6-0

Barrans, Simon and Muller, Matthias (2009) Finite element prediction of the ultimate axial load capacity of V-section band clamps. Journal of Physics: conference series, 181. pp. 1-8. ISSN 1742-6596

Blunt, Liam, Bills, Paul J., Jiang, Xiang, Hardacker, Catherine and Chakrararty, Gautum (2009) The role of tribology and metrology in the latest development of bio-materials. Wear, 266 (3-4). pp. 424-431. ISSN 0043-1648

Blunt, Liam, Jiang, Xiang and Scott, Paul J. (2009) Precision and Nanoscale Surface Metrology. In: International Moulded Optics Conference,, 19-20th Nov 2009, Breman Germany. (Unpublished)

Blunt, Liam, Jiang, Xiang, Zeng, Wenhan and Asim, Taimoor (2009) A new way to evaluate steel sheet surfaces. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia. (Unpublished)

Brown, L., Zhang, H. and Blunt, Liam (2009) Investigation of a possible wear mechanism at the cement head interface in hip resurfacing arthroplasty. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco. (Submitted)

Charles, Peter, Sinha, Jyoti K., Gu, Fengshou, Lidstone, Liam and Ball, Andrew (2009) Detecting the crankshaft torsional vibration of diesel engines for combustion related diagnosis. Journal of Sound and Vibration, 321 (3-5). pp. 1171-1185. ISSN 0022-460X

Chen, Xun (2009) Corrective Abrasive Polishing Processes for Freeform Surface. Key Engineering Materials, 404. pp. 103-112. ISSN 1013-9826

Chen, Xun (2009) Fundamental Study of Corrective Abrasive Machining Technology. In: CIRP UK Meeting, 8th May 2009. (Unpublished)

Colley, Gareth, Mishra, Rakesh, Rao, H.V. and Woolhead, R. (2009) Performance evaluation of three cross flow vertical axis wind turbine configurations. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 130-136. ISBN 9781862180857

Colley, Gareth, Mishra, Rakesh, Rao, Vasu and Woolhead, R. (2009) Effect of External Structures on Vertical Axis Wind Turbine Flow Field. Proceedings of the National Conference on Fluid Mechanics & Fluid Power, December 17-19,2009,College of Engineering,Pune.

Crabtree, Michael Anthony (2009) Industrial flow measurement. Masters thesis, University of Huddersfield.

Duan, Wenbo, Gu, Fengshou, Dupère, Iain, Zhong, Shan and Ball, Andrew (2009) The Effects of Blockage on the Propagation of Acoustic Waves in the Liquid-Shell Coupled System. Key Engineering Materials, 413-41. pp. 327-333. ISSN 1013-9826

Elamin, Fathi (2009) Lubricating Oil Condition Monitoring Using Acoustic Emission. In: Emerging Technologies in Computing and Engineering: Annual Researchers' Conference 2009 (CEARC '09), 11th December 2009, University of Huddersfield, UK. (Unpublished)

Fan, Yibo, Gu, Fengshou and Ball, Andrew (2009) Acoustic Emission Monitoring of Mechanical Seals Using MUSIC Algorithm based on Higher Order Statistics. Key Engineering Materials, 413-41. pp. 811-816. ISSN 1013-9826

Fieldhouse, John D., Ashraf, Naveed and Talbot, Chris J. (2009) The Measurement and Analysis of the Disc/Pad Interface Dynamic Centre of Pressure and its Influence on Brake Noise. SAE International Journal of Passenger Cars- Mechanical Systems, 1 (1). pp. 736-745. ISSN 1946-3995

Fieldhouse, John D., Ashraf, Naveed and Talbot, Chris J. (2009) Measurement of the dynamic centre of pressure of the disc/pad interface during a braking operation. International Journal of Vehicle Design, 51 (1/2). pp. 73-104. ISSN 0143-3369

Fieldhouse, John D., Ashraf, Naveed and Talbot, Chris J. (2009) An investigation of the movement of the disc / pad center of pressure during a braking event. In: 12th EAEC European Automotive Congress 2009, 29th June - 1st July 2009, Bratislava. (Unpublished)

Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2009) A Robust Experimental Evaluation of Novel Cool Disc Brake Design. In: 27th Annual SAE 2009 Brake Colloquium and Exhibition, 11th - 14th October 2009, Tampa, Florida, USA.

Fieldhouse, John D., Bryant, David, Talbot, Chris J. and Layfield, Jonathan (2009) Thermo-elastic and elastic investigations of a brake disc during a heavy braking event. In: 12th EAEC European Automotive Congress 2009, 29th June 1st July 2009, Bratislava. (Unpublished)

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2009) Defining and Computing Machine Tool Accuracy. In: Laser Metrology and Machine Performance. Euspen Ltd, Euspen Headquarters, Cranfield University, pp. 77-86. ISBN 978-0-9553082-7-7

Fouvry, S. and Kubiak, Krzysztof (2009) Development of a fretting-fatigue mapping concept: The effect of material properties and surface treatments. Wear, 267 (12). 2186 - 2199. ISSN 0043-1648

Fouvry, S. and Kubiak, Krzysztof (2009) Introduction of a fretting-fatigue mapping concept: Development of a dual crack nucleation - crack propagation approach to formalize fretting-fatigue damage. International Journal of Fatigue, 31 (8). 250 - 262. ISSN 0142-1123

Gao, F., Jiang, Xiang and Blunt, Liam (2009) Automated ballistic and tool mark identification. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Gao, F., Wang, Kaiwei and Jiang, Xiang (2009) A high speed scanning heterodyne interferometer for in process surface measurement. In: Proceedings of the euspen International Conference – San Sebastian - June 2009. European Society for Precision Engineering & Nanotechnology, San Sebastian, Spain. ISBN 13:978-0-9553082-6-0

Griffin, James Marcus and Chen, Xun (2009) Characteristics of the acoustic emission during horizontal single grit scratch tests: Part 2 classification and grinding tests. International Journal of Abrasive Technology, 2 (1). pp. 43-59. ISSN 1752-2641

Griffin, James Marcus and Chen, Xun (2009) Multiple classification of the acoustic emission signals extracted during burn and chatter anomalies using genetic programming. International Journal of Advanced Manufacturing Technology, 45 (11-12). pp. 1152-1168. ISSN 0268-3768

Gu, Fengshou, Naid, A., Hu, Niaoqing, Shao, Yimin, Mishra, Rakesh, Stubbs, Christopher and Ball, Andrew (2009) Electrical Motor Current Signal Analysis using Modified Bispectrum for Fault Diagnosis of Reciprocating Compressors. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Guan, Luyang, Gu, Fengshou, Shao, Yimin, Mishra, Rakesh and Ball, Andrew (2009) Empirical Mode Decomposition Based Method for Fault Diagnosis in a Helical Gearbox. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Hasan, Abbas and Lucas, Gary (2009) Modelling and Measurement of the Gas Flow Rate in Vertical Annular Gas-Water Flow Using a ‘Conductance Multiphase Venturi meter’. In: What, Where, When: Multi-dimensional Advances for Industrial Process Monitoring International Symposium, Tuesday 23 - Wednesday 24 June 2009, Leeds, UK. (Unpublished)

Khoong, L.E., Lam, Y.C., Chai, John, Ma, J. and Jiang, L. (2009) Modeling of mass transfers in a porous green compact with two-component binder during thermal debinding. Chemical Engineering Science, 64 (12). pp. 2837-2850. ISSN 0009-2509

Kubiak, Krzysztof and Mathia, T.G. (2009) Influence of roughness on contact interface in fretting under dry and boundary lubricated sliding regimes. Wear, 267 (1-4). 315 - 321. ISSN 0043-1648

Lobato, H, Fletcher, Simon, Myers, Alan, Orchard, N and Charlesworth, A (2009) Using a Kinematic Model of a Machine Tool to Predict Component Feature Capability. Laser Metrology and Machine Performance, IX . Euspen, Euspen Headquarters. ISBN 9780955308277

Longstaff, Andrew P., Fletcher, Simon, Poxton, Anthony and Myers, Alan (2009) Comparison of Volumetric Analysis Methods for Machine Tools with Rotary Axes. In: Laser Metrology and Machine Performance. Euspen Ltd, Euspen Headquarters, Cranfield University, pp. 87-96. ISBN 978-0-9553082-7-7

Lu, Wenlong, Jiang, Xiang, Scott, Paul J. and Lan, Xiangqi (2009) A Host System for Form Tolerance Specification in the Next-generation GPS based on AutoCAD. In: The 11th CIRP Conference on Computer Aided Tolerancing “Geometric Variations within Product Life-Cycle Management”, 26-27 March 2009, Annecy, France.

Malviya, Vihar, Mishra, Rakesh and Fieldhouse, John D. (2009) CFD Investigation of a Novel Fuel-Saving Device for Articulated Tractor-Trailer Combinations. Engineering Applications of Computational Fluid Mechanics, 3 (4). pp. 587-607. ISSN 1994-2060

Malviya, Vihar, Mishra, Rakesh and Fieldhouse, John D. (2009) Enhanced analytical vehicle stability model. In: Proceedings of the 12th EAEC European Automotive Congress 2009. EAEC. ISBN 9788096924387

Malviya, Vihar, Mishra, Rakesh and Gundala, Naresh (2009) CFD-Based Modelling of the Variation of Aerodynamic Coefficients with Wind Angle. In: Proceeding of National Conference on Fluid Mechanics & Fluid Power 17-19 December 2009. College of Engineering Pune, Pune, India.

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2009) Efficient Offline Thermal Modelling for Accurate Assessment of Machine Tool Thermal Behaviour. In: Laser Metrology and Machine Performance. Euspen, Euspen Headquarters, Cranfield University, pp. 9-18. ISBN 978-0-9553082-7-7

Mishra, Rakesh, Alseddiqi, Mohamed and Pislaru, Crinela (2009) An improved employability skills model and its compliance through vocational educational system. In: Learning: the sixteenth international conference on Learning, 1-4 July 2009, University of Barcelona, Spain. (Unpublished)

Mishra, Rakesh, Gu, Fengshou, Fazenda, Bruno, Stubbs, Christopher and Ball, Andrew (2009) Measurement and Characterisation of Faults in the Intake System of a Turbocharged Engine Using a Directional Acoustic Probe. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Myers, Alan, Barrans, Simon, Longstaff, Andrew P., Fletcher, Simon and Ford, Derek G. (2009) Evaluation and Comparison of a Large Machine Tool Structure with ISO Standard Alignment Tests. In: Laser Metrology and Machine Performance. Euspen Ltd, euspen headquarters, University of Cranfield, pp. 57-66. ISBN 978-0-9553082-7-7

Naid, A., Gu, Fengshou, Shao, Yimin, Al-Arbi, Salem and Ball, Andrew (2009) Bispectrum Analysis of Motor Current Signals for Fault Diagnosis of Reciprocating Compressors. Key Engineering Materials, 413-41. pp. 505-511. ISSN 1013-9826

Obi, Stanley, Chen, Xun and Blunt, Liam (2009) Effect of polishing angle on material removal rate and surface finish using bonded abrasive pads. In: Lamdamap 9th International Conference, 30th June – 2nd July 2009, Brunel University. (Unpublished)

Oluwajobi, Akinjide O. and Chen, Xun (2009) Cellular automata modelling of micro abrasive machining. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 159-164. ISBN 9781862180857

Opoz, Tahsin Tecelli and Chen, Xun (2009) Finite element simulation of grinding process and micro-scale abrasive wear. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 165-171. ISBN 9781862180857

Palmer, Edward, Mishra, Rakesh and Fieldhouse, John D. (2009) An optimization study of a multiple-row pin-vented brake disc to promote brake cooling using computational fluid dynamics. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 223 (7). pp. 865-875. ISSN 0954-4070

Panagiotopoulos, Nickolaos (2009) Measurement of the Local Properties of Multiphase Flows. Doctoral thesis, University of Huddersfield.

Shi, John Z., Gu, Fengshou, Lennox, Barry and Ball, Andrew (2009) A Grey-box Modelling and Its Application in Model-based Fault Detection. International Journal of COMADEM, 12 (1). pp. 21-30. ISSN 1363-7681

Tesfa, Belachew, Mishra, Rakesh and Gu, Fengshou (2009) Performance of Compression Ignition (CI) Engine Running on Biodiesel during Transient Condition. In: Thirty Sixth National Conference on Fluid Mechanics and Fluid Power, 17- 19 December 2009, Pune, India.

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Condition Monitoring of CI engine running on Biodiesel using Transient Process. Key Engineering Materials, 413-14. pp. 495-503. ISSN 1013-9826

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Transient process modeling for condition monitoring of compression ignition (CI) engine. In: Proceedings of the 12th EAEC European Automotive Congress 2009. European Automotive Congress. ISBN 9788096924387

Tran, Van Tung and Yang, Bo-Suk (2009) Data-driven approach to machine condition prognosis using least square regression trees. Journal of Mechanical Science and Technology, 23 (5). pp. 1468-1475. ISSN 1976-3824

Tran, Van Tung and Yang, Bo-Suk (2009) Machine Fault Diagnosis and Prognosis: The State of The Art. The International Journal of Fluid Machinery and Systems (IJFMS), 2 (1). pp. 61-71. ISSN 1882-9554

Tran, Van Tung, Yang, Bo-Suk, Oh, Myung-Suck and Tan, Andy Chit Chiow (2009) Fault diagnosis of induction motor based on decision trees and adaptive neuro-fuzzy inference. Expert Systems With Applications, 36 (2). pp. 1840-1849. ISSN 0957-4174

Tran, Van Tung, Yang, Bo-Suk and Tan, Andy Chit Chiow (2009) Multi-step ahead direct prediction for machine condition prognosis using regression trees and neuro-fuzzy systems. Expert Systems With Applications, 36 (5). pp. 9378-9387. ISSN 0957-4174

Treetrong, Juggrapong, Sinha, Jyoti K., Gu, Fengshou and Ball, Andrew (2009) Bispectrum of stator phase current for fault detection of induction motor. ISA Transactions, 48 (3). pp. 378-382. ISSN 0019-0578

Ward, Lisa J. and Gaffikin, Jane A. (2009) Student Placement Journeys - An On-line collection of video resources showcasing the development of students on one year work placements with the views from their employers and placement tutors. In: 18th World Conference for Co-operative Education, 'An International Dialogue in Vancouver', July, 2009, Vancouver, Canada. (Unpublished)

Xu, Yuanping (2009) The exploration of a category theory-based virtual Geometrical product specification system for design and manufacturing. Doctoral thesis, University of Huddersfield.

Zeng, Wenhan, Jiang, Xiang and Blunt, Liam (2009) Surface Characterisation Based Tool Wear Monitoring in Peripheral milling. International Journal of Advanced Manufacturing Technology, 40 (3). pp. 226-233. ISSN 0268-3768

Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2009) Evaluation Of Fretting Wear On The Femoral Stem Surface. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco.

Zhang, H., Shi, John Z., Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2009) Model-based Fault Detection for a Turbocharger. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Zhang, Hongyu, Brown, L., Blunt, Liam and Barrans, Simon (2009) Evaluation of fretting wear on the femoral stem surface. In: International Conference on Bioengineering & Biomaterials, 18-29 March, Meknes, Moroco.

Zhang, Xiangchao (2009) Free-form surface fitting for precision coordinate metrology. Doctoral thesis, University of Huddersfield.

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2009) A new free-form surface fitting method for precision coordinate metrology. Wear, 266 (5-6). pp. 543-547. ISSN 0043-1648

Zhang, Xiangchao, Jiang, Xiang, Scott, Paul J. and Cooper, Philip (2009) A Fast Point Projection Approach of NURBS surfaces. In: A4A6 - Algorithms for Approximation VI 2009, 31st August - 4th September 2009, Ambleside, UK. (Unpublished)

Zhao, Xin, Lucas, Gary and Pradhan, Suman (2009) Signal Processing method in using four-sensor probe for measuring the velocity vector of air-liquid two phase flow. Journal of the Japanese Society of Experimental Mechanics (JSEM), 9. pp. 19-24.

2008

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter and Myers, Alan (2008) A Low Cost Ultrasonic 3D Measurement Device for Calibration for Cartesian and Non-Cartesian Machines. In: Third International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics ISEM 2008, 7th - 10th December 2008, National Cheng Kung University, Tainan, Taiwan. (Unpublished)

Bills, Paul J., Blunt, Liam and Chakrabarty, G. (2008) Developing techniques for the dimensional assessment of true clinical wear in retrieved total joint replacements. In: Materials for Improved Wear Resistance of Total Artificial Joints. Tekniker, Eibar, Spain, pp. 109-118. ISBN 978-84-932064-4-4

Blunt, Liam, Bills, Paul J., Jiang, Xiang and Chakrabarty, G. (2008) Improvement in the assessment of wear of total knee replacements using coordinate-measuring machine techniques. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 222 (3). pp. 309-318. ISSN 0954-4119

Blunt, Liam, Zhang, H., Barrans, Simon and Brown, L. (2008) The Relative Contribution of Micropores and Shrinkage Bumps on Cement Surface to Fretting Wear on polished Stems. In: 35th Leeds-Lyon Symposium on Tribology, 9th-12th September 2008, Leeds. (Submitted)

Bryant, David, Fieldhouse, John D., Crampton, Andrew, Talbot, Chris J. and Layfield, Jonathan (2008) Thermal Brake Judder Investigations Using a High Speed Dynamometer. In: Brake Technology, 2008. SAE. ISBN 978-0-7680-2030-4

Chai, John and Yap, Y.F. (2008) A distance-function-based Cartesian (DIFCA) grid method for irregular geometries. International Journal of Heat and Mass Transfer, 51 (7-8). pp. 1691-1706. ISSN 0017-9310

Chen, Xun (2008) Machining Dynamics in Grinding Processes. In: Machining Dynamics: Fundamentals, Applications and Practices. Springer Series in Advanced Manufacturing . Springer, London, pp. 233-262. ISBN 978-1-84628-367-3

Elhaj, M. (2008) Numerical simulation and experimental study of a two-stage reciprocating compressor for condition monitoring. Mechanical Systems and Signal Processing, 22 (2). pp. 374-389. ISSN 0888-3270

Elhaj, M., Gu, Fengshou, Ball, Andrew, Albarbar, A., Al-Qattan, M. and Naid, A. (2008) Numerical Simulation and Experimental Study of a Two Stage Reciprocating Compressor for Condition Monitoring. Mechanical Systems and Signal Processing, 22 (2). pp. 374-389. ISSN 08883270

Fazenda, Bruno, Gu, Fengshou, Ball, Andrew and Gilkes, Oliver S. (2008) Acoustic diagnosis of driving belt physical condition in enclosures. In: INTER-NOISE 2008, the 37th International Congress and Exposition on Noise Control Engineering, 26-29 October 2008, Shanghai, China.

Fieldhouse, John D., Ashraf, Naveed and Talbot, Chris J. (2008) The Measurement and Analysis of the Disc/Pad Interface Dynamic Centre of Pressure and its Influence on Brake Noise. In: Brake Technology. SAE Special Publication Papers (SP2188). SAE International, Warrendale, PA, USA. ISBN 9780768020304

Fieldhouse, John D., Ashraf, Naveed and Talbot, Chris J. (2008) The Measurement and Analysis of the Disc/Pad Interface Dynamic Centre of Pressure and its Influence on Brake Noise. SAE International Journal of Passenger Cars- Mechanical Systems, 1 (1). pp. 736-745. ISSN 1946-3995

Fieldhouse, John D., Steel, William P. and Talbot, Chris J. (2008) The measurement of the absolute displacement of a noisy disc brake. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 222 (7). pp. 1121-1140. ISSN 0954-4070

Fouvry, S., Nowell, D., Kubiak, Krzysztof and Hills, D.A. (2008) Prediction of fretting crack propagation based on a short crack methodology. Engineering Fracture Mechanics, 75 (6). 1605 - 1622. ISSN 0013-7944

Gao, F., Leach, Richard K., Petzing, J and Coupland, J. M. (2008) Surface Measurement Errors using Commercial Scanning White Light Interferometers. Measurement Science and Technology, 19 (1). 015303. ISSN 0957-0233

Gilkes, Oliver S., Mishra, Rakesh and Fieldhouse, John D. (2008) Simulation of the Transient Performance of a Turbocharged Diesel Engine Featuring a Two Point Air Injection Transient Assist System. Working Paper. SAE International, London, UK.

Jang, J., Gu, Fengshou, Gennish, R., Moore, Jonathan P., Harris, G. and Ball, Andrew (2008) Monitoring of Diesel Engine Combustions Based on the Acoustic Source Characterisation of the Exhaust System. Mechanical Systems and Signal Processing, 22 (6). pp. 1465-1480. ISSN 08883270

Jiang, Xiang, Scott, Paul J. and Whitehouse, D.J. (2008) Wavelets and their applications for surface metrology. CIRP Annals - Manufacturing Technology, 57 (1). pp. 555-558. ISSN 0007-8506

Li, T., Jiang, Xiang, Blunt, Liam, Scott, Paul J. and Xiao, Shaojun (2008) The Design and Use of F1 Softgauges for Validating Surface Metrology Software. Key Engineering Materials, 381-38. pp. 643-646. ISSN 1013-9826

Lu, Wenlong, Jiang, Xiang, Liu, X.J. and Xu, Zhijie (2008) Compliance uncertainty of diameter characteristic in the next-generation geometrical product specifications and verification. Measurement Science and Technology, 19 (10). pp. 105103-1. ISSN 0957-0233

Mishra, Rakesh (2008) A model for the prediction of pressure drop in a two dimensional rectangular duct carrying a solid-liquid mixture. In: Bulk Europe 2008, 16th-17th October 2008, Prague, Czeck Republic. (Unpublished)

Myers, Alan, Pislaru, Crinela, Longstaff, Andrew P. and Fletcher, Simon (2008) Machine Tool Accuracy and Real-Time Control. In: Research Festival - School of Computing and Engineering Research Open Day, Friday 7th March 2008, University of Huddersfield. (Unpublished)

Palmer, Edward, Mishra, Rakesh and Fieldhouse, John D. (2008) A computational fluid dynamic analysis on the effect of front row pin geometry on the aerothermodynamic properties of a pin-vented brake disc. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 222 (7). pp. 1231-1245. ISSN 0954-4070

Peng, H.P., Jiang, Xiang and Liu, X.J. (2008) Concurrent optimal allocation of design and process tolerances for mechanical assemblies with interrelated dimension chains. International Journal of Production Research, 46 (24). pp. 6963-6979. ISSN 00207543

Peng, H.P., Jiang, Xiang, Xu, Zhijie and Liu, X.J. (2008) Optimal tolerance design for products with correlated characteristics by considering the present worth of quality loss. International Journal of Advanced Manufacturing Technology, 39 (1-2). pp. 1-8. ISSN 0268-3768

Pislaru, Crinela, Sztendel, S., Ford, Derek G. and Myers, Alan (2008) Real-time implementation of a novel transmission line matrix (TLM) model for high speed feed drives. In: MATAR 2008, 15th-18th September 2008, Prague University. (Unpublished)

Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2008) An expert mill cutter and cutting parameters selection system incorporating a control strategy. In: Proceedings of the 17th IFAC World Congress, 2008. International Federation of Automatic Control IFAC, COEX, South Korea, pp. 8362-8367. ISBN 978-3-902661-00-5

Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2008) A procedure to obtain mill cutter and cutting parameters using parameter optimization under constraints and expert rules. In: IEEE International Conference on Control Applications, 2008. CCA 2008, 3-5 September 2008, San Antonio, Texas.

Sztendel, S. and Pislaru, Crinela (2008) Development of control grafical user interface (GUI)for a dSPACE real-time system. In: Research Festival - School of Computing and Engineering Research Open Day, Friday 7th March 2008, University of Huddersfield. (Unpublished)

Sztendel, S., Pislaru, Crinela, Ford, Derek G. and Myers, Alan (2008) Development of experiment control graphical user interface for Hardware in the Loop (HIL) simulations. In: MATAR 2008, 15th-18th September 2008, Prague University. (Unpublished)

Tran, Van Tung (2008) Machine condition prognosis using multi-step ahead prediction and neuro-fuzzy systems. In: International Symposium on Advanced Mechanical and Power Engineering, 2008, Busan, Korea.

Tran, Van Tung, Yang, Bo-Suk, Oh, Myung-Suck and Tan, Andy Chit Chiow (2008) Machine condition prognosis based on regression trees and one-step-ahead prediction. Mechanical Systems and Signal Processing, 22 (5). pp. 1179-1193. ISSN 0888-3270

Wang, Y., Chen, Xun, Gindy, Nabil and Xie, J. (2008) Elastic deformation of a fixture and turbine blades system based on finite element analysis. International Journal of Advanced Manufacturing Technology, 36 (3-4). pp. 296-304. ISSN 0268-3768

Whitehouse, D.J. (2008) Nanometrology. Contemporary Physics, 49 (5). pp. 351-374. ISSN 00107514

Xie, F, Xiao, S, Blunt, Liam, Zeng, Wenhan and Jiang, Xiang (2008) Automated bullet-identification system based on surface topography techniques. Wear, 266. pp. 518-522. ISSN 0043-1648

Yap, Y. F., Chai, John, Wong, T. N., Nguyen, N. T., Toh, K. C., Zhang, H. Y. and Yobas, L. (2008) A Procedure for the Motion of Particle-Encapsulated Droplets in Microchannels. Numerical Heat Transfer, Part B: Fundamentals, 53 (1). pp. 59-74. ISSN 1040-7790

Zhang, Hongyu, Blunt, Liam, Jiang, Xiang, Brown, Leigh, Barrans, Simon and Zhao, Y. (2008) Femoral stem wear in cemented total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 222 (5). pp. 583-592. ISSN 0954-4119

Zhang, Hongyu, Brown, Leigh, Blunt, Liam and Barrans, Simon (2008) Influence of femoral stem surface finish on the apparent static shear strength at the stem–cement interface. Journal of Mechanical Behaviour of Biomedical Materials, 1 (1). pp. 96-104. ISSN 1751-6161

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2008) Orthogonal distance fitting of precision free form surfaces based on l1 norm. In: Conference on Advanced Mathematical and Computational Tools in Metrology and Testing, 23 – 25 June 2008, Paris, France.

Zolgharni, M, Jones, Benjamin, Bulpett, R, Anson, A.W. and Franks, J (2008) Energy Efficiency Improvements in Dry Drilling with Optimised Diamond-Like Carbon Coating. Diamond and Related Materials, 17 (7). pp. 1733-1737. ISSN 0925-9635

2007

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Fieldhouse, John D., Ward, Steve and McComish, John (2007) Effectiveness of Computer Assisted Laboratory Instructions:Learning Outcomes Analysis. International Journal of Learning, 14 (8). pp. 197-209. ISSN 1447-9494

Che, X. and Griffin, James Marcus (2007) Grinding acoustic emission classification in terms of mechanical behaviours. Key Engineering Materials, 329. pp. 15-20. ISSN 1013-9826

Feng, Zhengming and Chen, Xun (2007) Image processing of grinding wheel surface. International Journal of Advanced Manufacturing Technology, 32 (1-2). pp. 27-33. ISSN 0268-3768

Fieldhouse, John D. (2007) An investigation of the pad/disc dynamic centre of pressure using a 12 piston opposed caliper. In: 25th Annual Brake Colloquium and Engineering display, Orlando, Florida.

Fieldhouse, John D. and Ashraf, Naveed (2007) Observations of the disc/pad interface pressure distribution during variable braking conditions and its influence on brake noise. In: Proceedings of the XXVII. International µ Symposium 2007. VDI Reports Series . VDI Verlag GmbH. ISBN 9783183657124

Gao, F., Petzing, J, Coupland, J. M. and Leach, Richard K. (2007) Measurement of structured surface using stylus, AFM and optical methods. In: Metrology and properties of engineering surfaces: proceedings of the 11th international conference, Huddersfield, on 17th-20th July 2007. University of Huddersfield, Huddersfield, UK, p. 363. ISBN 1862180571

Holroyd, Geoffrey (2007) The modelling and correction of ball-screw geometric, thermal and load errors on CNC machine tools. Doctoral thesis, The University of Huddersfield.

Khoong, L.E., Lam, Y.C., Chai, John, Jiang, L. and Ma, J. (2007) Numerical and experimental investigations on thermal debinding of polymeric binder of powder injection molding compact. Chemical Engineering Science, 62 (23). pp. 6927-6938. ISSN 0009-2509

Liu, Qiang, Chen, Xun and Gindy, Nabil (2007) Assessment of Al2O3 and superabrasive wheels in nickel-based alloy grinding. International Journal of Advanced Manufacturing Technology, 33 (9-10). pp. 940-951. ISSN 0268-3768

Malviya, Vihar, Mishra, Rakesh, Palmer, Edward and Majumdar, Bireswar (2007) CFD Based Analysis of the Effect of Multi-Hole Pressure Probe Geometry on Flow Field Interference. In: Fluid mechanics and Fluid Power. Birla Institute of Technology, pp. 113-122.

Malviya, Vihar, Mishra, Rakesh, Palmer, Edward and Majumdar, Bireswar (2007) Numerical analysis and optimisation of multi-hole pressure probe geometry. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-8.

Mishra, Rakesh and Rasool, S. A. (2007) A practical approach to increase learning effectiveness in engineering education: SHOCC approach. In: Learning Conference 2007, 26-29 June 2009, Johannesburg, South Africa. (Unpublished)

Myers, Alan, Barrans, Simon and Ford, Derek G. (2007) Structural Analysis of a Large Moving Gantry Milling Machine including its Work Support System and Foundation. In: Laser Metrology and Machine Performance VIII. Euspen Ltd, Euspen Headquarters, Cranfield University, pp. 63-72. ISBN 9780955308239

Palmer, Edward (2007) The manipulation of heat transfer characteristics of a pin vented brake rotor through the design of rotor geometry. In: European Automotive Congress EAEC 2007, 2007, Budapest.

Palmer, Edward and Fieldhouse, John D. (2007) Comparison of air flow and heat dissipation from the front brakes fitted to a high performance GT Car. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-8.

Pislaru, Crinela (2007) Sensors and condition monitoring practices. In: Getting The Most Out of Machinery Condition Monitoring - The Design, Development and Application of Sensors, Tuesday 13th March 2007, Birmingham, UK. (Unpublished)

Pislaru, Crinela, Widiyarto, Muhammad Helmi Nur, Ford, Derek G. and Myers, Alan (2007) Theoretical and experimental approach for the evaluation of structural dynamics of CNC machine tools. In: Lamdamap 2007 8th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, 25th June-28th June 2007, Cardiff University, Wales. (Unpublished)

Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, C. and Pislaru, Crinela (2007) Analysis and reduction of machine tool non-rigid errors. In: School of Computing and Engineering Annual Researchers’ Conference 2007, 14th December 2007, University of Huddersfield. (Unpublished)

Ramasawmy, Haree and Blunt, Liam (2007) Investigation of the effects of electrochemical polishing on EDM surfaces. International Journal of Manufacturing Technology and Management, 31 (11-12). pp. 1135-1147. ISSN 1368-2148

Rath, P. and Chai, John (2007) Modeling Convection-Driven Diffusion-Controlled Wet Chemical Etching Using a Total-Concentration Fixed-Grid Method. Numerical Heat Transfer, Part B: Fundamentals, 53 (2). pp. 143-159. ISSN 1040-7790

Rath, P., Chai, John, Lam, Y. C., Murukeshan, V. M. and Zheng, H. (2007) A Total Concentration Fixed-Grid Method for Two-Dimensional Wet Chemical Etching. Journal of Heat Transfer, 129 (4). pp. 509-516. ISSN 0022-1481

Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2007) Adaptive Control of Milling Forces under Fractional Order Holds. In: Innovative Algorithms and Techniques in Automation, Industrial Electronics and Telecommunications. Springer, London, UK, pp. 257-261. ISBN 978-1-4020-6265-0

Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2007) Discrete-time model reference control schemes of milling forces using fractional order holds. In: Proceedings of Industrial Electronics Society, 2007. IECON 2007. 33rd Annual Conference of the IEEE. IEEE, Taipei, Taiwan, pp. 798-803. ISBN 1-4244-0783-4

Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2007) Intelligent adaptive control of forces in milling processes. In: 15th IEEE Mediterranean Conference on Control and Automation, 27th-29th June 2007, Athens, Greece.

Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2007) Optimization rules for mill cutter and cutting parameters selection incorporating a control algorithm. In: Proceedings of Emerging Technologies and Factory Automation,. ETFA 2007 . IEEE, Patras, Greece, pp. 1421-1424.

Tran, Van Tung (2007) Data-driven approach to machine condition prognosis using least square regression trees. In: The KSNVE Annual Autumn Conference, 2007, Korea.

Tran, Van Tung, Yang, Bo-Suk, Oh, Myung-Suck and Tan, Andy (2007) Machine condition prognosis based on regression trees and one-step-ahead prediction. In: International Symposium on Mechatronics and Automatic Control, 2007, Hochiminh City, Vietnam.

Wang, Y., Chen, Xun and Gindy, Nabil (2007) Surface error decomposition for fixture development. International Journal of Advanced Manufacturing Technology, 31 (9-10). pp. 948-956. ISSN 0268-3768

Yang, Shuming and Jiang, Xiang (2007) The beam propagation method used for the design of an integrated optical coupler. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Yap, Y. F., Chai, John, Wong, T. N., Nguyen, N. T., Toh, K. C. and Zhang, H. Y. (2007) Particle Transport in Microchannels. Numerical Heat Transfer, Part B: Fundamentals, 51 (2). pp. 141-157. ISSN 1040-7790

Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2007) Generation of fretting wear debris at the stem-cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-4.

Zhang, X., Jiang, Xiang and Crampton, Andrew (2007) Numerical Analysis of the Boundary Effect of Radial Basis Functions in 3D Surface Reconstruction. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Zheng, Lin, Shi, John Z. and Ball, Andrew (2007) Model-based Fault Detection for an Electro-hydraulic System Using Extended Kalman Filter. In: Second World Congress of Asset Management and the Fourth International Conference on Condition Monitoring, 11th - 14th June 2007, Harrogate, UK.

Zheng, Lin, Shi, John Z., Lidstone, Liam and Ball, Andrew (2007) Development of a Fault Prognostics Model for a Non-linear Control System using the Extended Kalman Filter. In: Second World Congress of Asset management and the Fourth International Conference on Condition Monitoring, 11th - 14th June 2007, Harrogate, UK.

2006

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2006) Computer Assisted Laboratory Instructions: Learning Outcomes Analysis. In: Proceedings of IV international conference on multimedia and information and communication technologies in communication. m-ICTE, Seville, Spain, pp. 330-341. ISBN 8469024698

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Fieldhouse, John D. and Ward, Steve (2006) Effectiveness of Parallel and Serial Integration of Teaching Resources in Laboratory Teaching in Engineering Education. International Journal of Learning, 13 (6). pp. 55-62. ISSN 1447-9494

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Fieldhouse, John D., Ward, Steve and McComish, John (2006) Effect of integration of computer simulations in traditional teaching methodology. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, UK, pp. 1-8.

Barrans, Simon and Weston, R.H (2006) Technical Application Series - A strain data aquisition system suitable for remote applications. Experimental Techniques, 28 (3). pp. 68-71. ISSN 0732-8818

Blunt, Liam, Bills, Paul J., Hardaker, Cath and Pantelis, Costas (2006) The use of CMM techniques to assess the wear of total knee replacements. In: Nodtrib 2006 - The 12th Nordic Symposium on Tribology. DTU Tryk, Lyngby, Denmark, p. 61. ISBN 87-90416-17-1

Castaneda, Veimar Yobany Moreno (2006) Transmission line modelling applied to non-linear control systems. Post-Doctoral thesis, University of Huddersfield.

Chen, Xun and Limchimchol, Thitikorn (2006) Monitoring Grinding Wheel Redress-life Using Support Vector Machines. International Journal of Automation and Computing, 3 (1). pp. 56-62. ISSN 1476-8186

Feng, Z. and Chen, Xun (2006) Grinding Wheel Loading Features Extracted by Image Processing. Key Engineering Materials, 304-30. pp. 14-18. ISSN 1662-9795

Fieldhouse, John D., Ashraf, Naveed, Talbot, Chris J. and Woods, Sam (2006) Brake noise reduction on a heavy duty vehicle using rotor asymmetry. In: FISITA World Automotive Congress 2006, Yokohama, Japan.

Fieldhouse, John D., Bryant, David, Talbot, Chris J., Crampton, Andrew and Mishra, Rakesh (2006) The development of a design methodology to reduce the probability of brake judder and drone due to thermo-elastic instabilities of the brake rotor. In: FISITA World Automotive Congress 2006, Yokohama, Japan.

Fieldhouse, John D., Palmer, Edward and Mishra, Rakesh (2006) Optimisation of pin shape and its configuration for a "PIN" type vented brake disc using CFD. In: FISITA 2006 World Automotive Congress, Yokohama, Japan.

Fieldhouse, John D., Steel, Perry and Talbot, Chris J. (2006) Absolute displacement measurements of a brake disc during self generated noise. In: FISITA World Automotive Congress 2006, Yokohama, Japan.

Gao, F., Coupland, J. M. and Petzing, J. (2006) V-groove measurement with white light interferometry. In: Photon06, 4-7 September, 2006, Manchester.

Gennish, R., Jiang, J, Albarbar, A., Harris, Georgina, Gu, Fengshou and Ball, Andrew (2006) Diesel Engine Combustion Monitoring Based on Acoustic Measurement of Exhaust Systems. In: ASME 8th Biennial Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Torino, Italy. (Unpublished)

Griffin, J, Limchimchol, Thitikorn and Chen, Xun (2006) Multivariable classification of grinding burn and chatter. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International. ISBN 9780953389094

Gu, Fengshou, Yesilyurt, I., Li, Yuhua, Harris, Georgina and Ball, Andrew (2006) An Investigation of the Effects of Measurement Noise in the Use of Instantaneous Angular Speed for Machine Diagnosis. Mechanical Systems and Signal Processing, 20 (6). pp. 1444-1460. ISSN 08883270

Horler, Greg (2006) Actuation control. WO2006016149 (A1).

Jackson, Mark J., Robinson, Grant M. and Chen, Xun (2006) Laser Surface Preparation of Vitrified Grinding Wheels. Journal of Materials Engineering and Performance, 15 (2). pp. 247-250. ISSN 1059-9495

Jiang, Jian, Liu, Ke, Gu, Fengshou, Yin, Yao and Ball, Andrew (2006) An Investigation Into the Control of the Combustion Instability Using Acoustic Resonator for a Jet Engine. In: Dynamic Systems and Control, Parts A and B: Proceedings of the ASME 2006 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers (ASME), pp. 1531-1537. ISBN 0-7918-4768-3

Jiang, Xiang and Mahadevan, S. (2006) Bayesian cross-entropy methodology for optimal design of validation experiments. Measurement Science and Technology, 17. pp. 1895-1908. ISSN 0957-0233

Kubiak, Krzysztof, Fouvry, S., Marechal, A.M. and Vernet, J.M. (2006) Behaviour of shot peening combined with WC-Co HVOF coating under complex fretting wear and fretting fatigue loading conditions. Surface and Coatings Technology, 201 (4). 4323 - 4328. ISSN 0257-8972

Kubiak, Krzysztof, Fouvry, S. and Wendler, B.G. (2006) Comparison of shot peening and nitriding surface treatments under complex fretting loadings. Materials Science Forum, 513 (3). 105 - 118. ISSN 0255-5476

Limchimchol, Thitikorn, Griffin, James Marcus and Chen, Xun (2006) Multi-class classification of grinding chatter detection using support vector machines. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 217-222. ISBN 9780953389094

Liu, Qiang, Chen, Xun, Cobb, Sue and Eastgate, Richard (2006) Physical behaviours simulation and exact collision detection within VFDAS. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 33-37. ISBN 9780953389094

Liu, Qiang, Chen, Xun and Gindy, Nabil (2006) Investigation of acoustic emission signals under a simulative environment of grinding burn. International Journal of Machine Tools and Manufacture, 46 (3-4). pp. 284-292. ISSN 08906955

Pislaru, Crinela, Myers, Alan and Ford, Derek G. (2006) Methods for modelling and simulating the dynamic behaviour of CNC machine tool feed drives. In: EUSPEN 2006, 28th May - 1st June 2006, Baden bei Wien, Austria.

Pislaru, Crinela, Myers, Alan, Ford, Derek G. and Moreno-Castaneda, V.Y. (2006) Modelling the Dynamic Behaviour of CNC Machine Tool Feed Drives by Using a Novel 2D Transmission Line Model. In: EUSPEN 2006, 28th May- 1st June 2006, Baden bei Wien, Austria.

Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2006) Discrete-time Model Reference Control of Milling Forces under Fractional Order Holds. Part I: Known Plant. In: IEEE Conference on Emerging Technologies and Factory Automation, 2006. ETFA '06, 20-22 September 2006, Prague, Czech Republic.

Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2006) Discrete-time Model Reference Control of Milling Forces under Fractional Order Holds. Part II: Extensions to Adaptive Control. In: IEEE Conference on Emerging Technologies and Factory Automation, 2006. ETFA '06, 20-22 September 2006, Prague, Czech Republic.

Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2006) Some aspects about Milling: Expert System for cutting parameters selection and Control Designs. In: Advanced Technologies: Research, Development and Application. ARS publishers, Germany. ISBN 9783866111974

Sasi, Ahmed Y. Ben, Gu, Fengshou, Li, Yuhua and Ball, Andrew (2006) A validated model for the prediction of rotor bar failure in squirrel-cage motors using instantaneous angular speed. Mechanical Systems and Signal Processing, 20 (7). pp. 1572-1589. ISSN 08883270

Scott, Paul J. (2006) The case of surface texture parameter RSm. Measurement Science and Technology, 17 (3). pp. 559-564. ISSN 09570233

Sheng, X., Clay, D.C. and Allport, John (2006) Dynamics of mistuned radial turbine wheels. In: 8th International Conference on Turbochargers and Turbocharging. Elsevier, London, UK, pp. 251-261. ISBN 978-1-84569-174-5

Su, Z., Tian, Gui Yun and Gao, C. (2006) A machine vision system for on-line removal of contaminants in wool. Mechatronics, 16 (5). pp. 243-247. ISSN 0957-4158

Tran, Van Tung, Yang, Bo-Suk and Oh, Myung-Suck (2006) An application of decision trees method for fault diagnosis of induction motors. In: International joint workshop, 2006, Yokohama, Japan.

Tran, Van Tung, Yang, Bo-Suk and Oh, Myung-Suk (2006) Fault Diagnosis of Induction Motors using Decision Trees. In: KSNVE Annual Autumn Conference, April 2006, Tongyoung, Korea.

Widiyarto, Muhammad Helmi Nur (2006) Modelling and passive correction investigation of vibration induced machining errors on CNC machine tools. Doctoral thesis, University of Huddersfield.

Yeung, Ka Yiu and Chen, Xun (2006) 2D freeform component fixture design optimisation using genetic algorithm. In: Advances in Manufacturing Technology XX: Proceedings of the 4th International Conference on Manufacturing Research (ICMR2006). BPR, pp. 131-136. ISBN 9780955321504

Yeung, Ka Yiu and Chen, Xun (2006) Web based approach for fixture design. In: Proceedings of the 12th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 171-175. ISBN 9780953389094

2005

Ashraf, Naveed, Talbot, Chris J., Fieldhouse, John D. and Steel, W.P (2005) Modelling friction-induced Vibrations using Spectral Methods. In: Symposium on Numerical Simulation in Automotive Engineering, Graz, Austria. (Unpublished)

Barrans, Simon and Bhat, N. (2005) Optimization of Flat PAD Bearings with the aid of Finite Element Analysis. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Chen, Xun, Liu, Q.S. and Gindy, Nabil (2005) Signal Analysis of Acoustic Emission for Laser Imitating Grinding Burn. Key Engineering Materials, 291-29. pp. 91-96. ISSN 1662-9795

Fieldhouse, John D., Ettemeyer, Andreas and Chen, Frank (2005) Laser metrology and its applications to brake squeal. In: Disc brake squeal - mechanism, analysis, evaluation, and reduction/prevention. SAE International. ISBN 9780768012484

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2005) Compensation of thermal errors on a small vertical milling machine. In: Proceedings of the 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. European Society for Precision Engineering and Nanotechnology, pp. 432-441. ISBN 1861941188

Freeman, J.M. and Ford, Derek G. (2005) The digital injection of signals into machine feedback loops via incremental encoder interfaces. Proceedings of the Institute of Mechanical Engineering Science Part C, 219 (3). pp. 325-329. ISSN 0954-4062

Griffin, James Marcus and Chen, Xun (2005) Investigation of grinding burn through various extracted sensory information. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 263-268. ISBN 9780953389087

Haase, Frerk (2005) The investigation and design of a piezoelectric active vibration control system for vertical machining centres. Doctoral thesis, University of Huddersfield.

Hewson, P. (2005) Method for estimating tyre cornering stiffness from basic tyre information. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 219 (12). pp. 1407-1412. ISSN 0954-4070

Holroyd, Geoffrey, Fletcher, Simon and Myers, Alan (2005) Modelling the dynamic behaviour of a ballscrew system taking into account the changing position of the ballscrew nut. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Kubiak, Krzysztof, Fouvry, S. and Marechal, A.M. (2005) A practical methodology to select fretting palliatives: Application to shot peening, hard chromium and WC-Co coatings. Wear, 259 (1). 367 - 376. ISSN 0043-1648

Li, Yuhua, Gu, Fengshou, Harris, G., Ball, Andrew, Bennett, N and Travis, K (2005) The measurement of instantaneous angular speed. Mechanical Systems and Signal Processing, 19 (4). pp. 786-805. ISSN 0888-3270

Liu, Qiang, Chen, Xun, Cobb, Sue and Eastgate, Richard (2005) Virtual reality application in fixture assembly and interactive simulation. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 183-188. ISBN 9780953389087

Liu, Qiang, Chen, Xun and Gindy, Nabil (2005) Fuzzy pattern recognition of AE signals for grinding burn. International Journal of Machine Tools and Manufacture, 45 (7-8). pp. 811-818. ISSN 08906955

Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2005) Volumetric error compensation through a Siemens controller. In: Proceedings of the 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. European Society for Precision Engineering and Nanotechnology, pp. 422-431. ISBN 1861941188

Lui, X.W., Cheng, K., Longstaff, Andrew P., Widiyarto, Muhammad Helmi Nur and Ford, Derek G. (2005) Improved dynamic cutting force model in ball-end milling. Part 1: theoretical modelling and experimental calibration. International Journal of Advanced Manufacturing Technology, 26 (5). pp. 457-465. ISSN 0268-3768

Moreno-Castaneda, V.Y., Pislaru, Crinela and Ford, Derek G. (2005) Modelling and simulation of the dynamic behaviour of a ball screw system using transmission line modelling technique. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Myers, Alan, Ford, Derek G. and Barrans, Simon (2005) Finite element analysis of the static stiffness of a foundation for large machine tool. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Myers, Alan, Ford, Derek G. and Xu, Q. (2005) Measurement techniques for determining the static stiffness of foundations for machine tools. Journal Paper of Physics: Conference Series, 13. pp. 410-413. ISSN 1742-6588

O'Brien, Mark (2005) Entente Cordiale: developing design alliances. In: Crossing Design Boundaries: Proceedings of the 3rd Engineering & Product Design Education International Conference, 15-16 September 2005, Edinburgh, UK. Routledge, pp. 207-212. ISBN 978-0-415-39118-4

Pislaru, Crinela, Ford, Derek G. and Moreno-Castaneda, V.Y. (2005) Modelling and simulation of CNC machine tool feed drives. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Pislaru, Crinela, Ford, Derek G., Widiyarto, Muhammad Helmi Nur and Myers, Alan (2005) Methods for modal parameters identification applied to CNC machine tool feed drives. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2005) An Expert System for Mill Cutter and Cutting Parameters Selection. In: Advances in Computer, Information, System Sciences and Engineering. Proceedings of IETA 2005, TeNe 2005 and EIAE 2005 (XVI). Springer, London, UK. ISBN 978-1-4020-5261-3

Rubio Rodriguez, Luis and De la Sen Parte, Manuel (2005) An expert mill cutter selection system. In: 10th IEEE International Conference on Emerging Technologies and Factory Automation, 19-22 September 2005, Catania, Italy.

Shi, John Z., Gu, Fengshou, Lennox, Barry and Ball, Andrew (2005) The development of an adaptive threshold for model-based fault detection of a nonlinear electro-hydraulic system. Control Engineering Practice, 13 (11). pp. 1357-1367. ISSN 0967-0661

Shoghi, K., Barrans, Simon and Rao, H.V. (2005) Plastic deformation in flat-section band clamps. Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science, 219 (1). pp. 93-102. ISSN 0954-4062

Starr, A and Ball, Andrew (2005) Systems integration in maintenance engineering. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (2). pp. 79-95. ISSN 0954-4089

Sun, D, Chen, Xun, Du, F, Yang, X, Zhang, J and Zhang, X (2005) Temperature simulation of 2050 rough rolling process. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 43-48. ISBN 9780953389087

Tian, J and Chen, Xun (2005) Multi-model reasoning medical diagnosis system integrated with probabilistic reasoning. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 79-84. ISBN 9780953389087

Wang, Kaiwei and Zeng, L. (2005) Heterodyne Fourier transform spectroscopy based on double-grating frequency shifter. Review of Scientific Instruments, 76 (6). 063108. ISSN 00346748

Widiyarto, Muhammad Helmi Nur, Pislaru, Crinela, Ford, Derek G., Longstaff, Andrew P. and Myers, Alan (2005) Hybrid modelling technique applied to digital feed drives. In: Proceedings of the 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. European Society for Precision Engineering and Nanotechnology, pp. 454-463. ISBN 1861941188

Yeung, Ka Yiu and Chen, Xun (2005) Automated fixture error minimisation using genetic algorithm. In: Proceedings of the 11th Chinese Automation and Computing Society Conference in the UK. Pacilantic International, pp. 67-72. ISBN 9780953389087

Zeng, Wenhan and Jiang, Xiang (2005) Complex wavelet transform based surface topography analysis. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

2004

Albarbar, A., Gennish, R., Gu, Fengshou and Ball, Andrew (2004) Lubricating Oil Condition Monitoring Using Vibration and Air-Borne Acoustic Measurements. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

Alshandoli, A. F. Saleh, Gu, Fengshou and Ball, Andrew (2004) Detection of Induction Motors Faults Using Instantaneous Phase Variation. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

Barrans, Simon and Weston, William (2004) Technical Application Series. A strain data acquisition system suitable for remote applications. Experimental Techniques, 28 (3). pp. 68-71. ISSN 0732-8818

Bills, Paul J., Blunt, Liam and Hardaker, Cath (2004) The use of CMM techniques to assess the functionality of total knee replacements. In: 8th International Symposium on Measurement and Quality Control in Production. VDI Verlag GmbH, Dusseldorf, Germany, pp. 73-80. ISBN 3-18-091860-8

Chen, X. Y., Toh, K. C., Yang, C. and Chai, J. C. (2004) Numerical Computation of Hydrodynamically and Thermally Developing Liquid Flow in Microchannels With Electrokinetics Effects. Journal of Heat Transfer, 126 (1). pp. 70-75. ISSN 00221481

El-Shtewi, Houssein F., Li, Yuhua, Gu, Fengshou and Ball, Andrew (2004) The Need for a Condition Monitoring Database Management System. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

Fan, Yibo Edward, Gu, Fengshou and Ball, Andrew (2004) A Review of the Condition Monitoring of Mechanical Seals. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

Fieldhouse, John D., Steel, William P., Talbot, Chris J. and Siddiqui, Mustakeem A. (2004) Rotor asymmetry used to reduce disc brake noise. SAE Technical Papers. ISSN 0148-7191

Hands, D. and O'Brien, Mark (2004) Asia - Link: Sino European Design Management Curriculum Development. In: International Engineering and Product Design Education Conference Proceedings: the 2nd International Engineering and Product Design Education Conference, Delft, The Netherlands , 2-3 September 2004. NVIO. ISBN 90-5155-020-0

Lam, Y. C., Tran, D. V., Zheng, H. Y., Murukeshan, V. M., Chai, John and Hardt, D. E. (2004) Surface damage of crystalline silicon by low fluence femtosecond laser pulses. Surface Review and Letters, 11 (02). pp. 217-221. ISSN 0218-625X

Liang, Bo, Iwnicki, S. and Swift, F. J. (2004) Independently Rotating Wheels With Induction Motors for High Speed Trains. In: Proceedings of ASME 7th Biennial Conference on Engineering Systems Design and Analysis. ESDA 2004, 2004 (4174X). ASME, Manchester, UK, pp. 21-26. ISBN 0-7918-4174-X

Liu, X., Cheung, K., Webb, D., Fiang, X.Q., Xiao, S.J., Longstaff, Andrew P., Widiyarto, H.M. and Jiang, Xiang (2004) Improved dynamic cutting force model in peripheral milling Part 2 Experimental verification and prediction. International Journal of Advanced Manufacturing Technology, 24. pp. 794-805. ISSN 0268-3768

Longstaff, Andrew P., Fletcher, Simon and Ford, Derek G. (2004) Better accuracy speaks volumes: lost in space. Machinery. pp. 14-16.

Myers, Alan (2004) Firm foundations for sure. Machinery, 162 (4. p. 48.

Pislaru, Crinela, Ford, Derek G. and Holroyd, Geoffrey (2004) Hybrid modelling and simulation of a computer numerical control machine tool feed drive. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 218 (2). pp. 111-120. ISSN 0959-6518

Pislaru, Crinela, Moreno-Castaneda, V.Y. and Ford, Derek G. (2004) Dynamic model of a non-linear servo control system using transmission line modelling technique. In: UKACC International Conference CONTROL 2004, 6-9 September 2004, University of Bath. (Unpublished)

Sasi, Ahmed Yousef Ben, Gu, Fengshou, Payne, Bradley and Ball, Andrew (2004) Instantaneous angular speed monitoring of electric motors. Journal of Quality in Maintenance Engineering, 10 (2). pp. 123-135. ISSN 1355-2511

Shi, Zhanqun, Fan, Yibo, Gu, Fengshou, Ali, Abdul-Hannan and Ball, Andrew (2004) Neural Network Modelling Applied for Model-Based Fault Detection. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

Shi, Zhanqun, Gu, Fengshou, Pietruszkiewicz, Robert and Ball, Andrew (2004) Remote Model-Based Condition Monitoring Applied to a Mechatronic Control System. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

Shoghi, K., Barrans, Simon and Rao, H.V. (2004) Stress in V-section band clamps. Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science, 218 (3). pp. 251-261. ISSN 0954-4062

Steel, William P., Fieldhouse, John D., Talbot, Chris J. and Crampton, Andrew (2004) In-plane disc brake vibration measurement using holographic interferometry. In: Total Vehicle Technology: Finding the Radical, Implementing the Practical (3rd International Conference). Wiley, pp. 261-274. ISBN 9781860584602

Steel, William P., Fieldhouse, John D., Talbot, Chris J. and Crampton, Andrew (2004) In-plane vibration investigations of a noisy disc brake. In: Braking 2004: Vehicle Braking and Chassis Control. Wiley, pp. 103-112. ISBN 978-1-86058-464-0

Steel, William P., Fieldhouse, John D., Talbot, Chris J. and Crampton, Andrew (2004) Modelling 3D displacement in a disc brake rotor generating noise. In: FISITA 2004 World Automotive Congress, 23rd-27th May, 2004, Barcelona, Spain. (Unpublished)

Talbot, Chris J., Fieldhouse, John D., Steel, William P. and Crampton, Andrew (2004) Pseudo-spectral methods applied to the mathematical modelling of disc brake squeal. In: Braking 2004: Vehicle Braking and Chassis Control. Wiley, pp. 157-166. ISBN 978-1-86058-464-0

Tian, Gui Yun and Gledhill, Duke (2004) Structured light based stereo vision for coordination of multiple robots. In: ICINCO 2004, Proceedings of the First International Conference on Informatics in Control, Automation and Robotics, Setúbal, Portugal, August 25-28, 2004. INSTICC Press, pp. 158-161. ISBN 972-8865-12-0

Xu, Qiang (2004) The development of validation methodology of multi-axial creep damage constitutive equations and its application to 0.5Cr0.5Mo0.25V ferritic steel at 590°C. Nuclear Engineering and Design, 228 (1-3). pp. 97-106. ISSN 0029-5493

2003

Ford, Derek G., ed. (2003) Laser metrology and machine performance VI. WIT Press, Southampton. ISBN 9781853129902

Ball, Andrew, Gu, Fengshou and Yesilyurt, I. (2003) Gear tooth stiffness reduction measurement using modal analysis and its use in wear fault severity assessment of spur gears. NDT & E International, 36 (5). pp. 357-372. ISSN 0963-8695

Barrans, Simon and Bhat, N. (2003) Design of flat bed aerostatic bearings with the aid of finite element analysis. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 361-370. ISBN 9781853129902

Barrans, Simon, Ghurbal, E.M. and Freeman, R. (2003) Design optimization of the head of a high precision polishing machine. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 325-334. ISBN 9781853129902

Baydar, N and Ball, Andrew (2003) Detection of gear failures via vibration and acoustic signals using wavelet transform. Mechanical Systems and Signal Processing, 17 (4). pp. 787-804. ISSN 0888-3270

Chen, Xun and Feng, Zhengming (2003) Effectiveness of Laser Cleaning for Grinding Wheel Loading. Key Engineering Materials, 238-39. pp. 289-294. ISSN 1013-9826

Fieldhouse, John D. and Talbot, Chris J. (2003) In-plane vibration investigations of a noisy twin caliper disc brake. SAE Technical Papers.

Fletcher, Simon and Ford, Derek G. (2003) Measuring and modelling heat transfer and thermal errors on a ballscrew feed drive system. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 349-360. ISBN 9781853129902

Ford, Derek G. (2003) Machine tool performance: past and present research contributions from the Centre for Precision Technologies. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 403-419. ISBN 9781853129902

Freeman, J.M. and Ford, Derek G. (2003) Automated error analysis of serial manipulators and servo heads. Proceedings of the Institute of Mechanical Engineering Part C, 217 (9). pp. 1077-1084. ISSN 0954-4062

Freeman, J.M., Longstaff, Andrew P. and Ford, Derek G. (2003) A general data logger for the measurement of the dynamics and the parameter estimation of machine tools. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 569-578. ISBN 9781853129902

Haase, Frerk, Lockwood, S. and Ford, Derek G. (2003) Active vibration control of machine tool structures - Part 2: an experimental active-vibration control system. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 451-460. ISBN 9781853129902

Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2003) Determination of stiffness and damping sensitivity for computer numerically controlled machine tool drives. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217 (10). pp. 1165-1177. ISSN 0954-4062

Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2003) Modelling the dynamic behaviour of a ball-screw system taking into account the changing position of the ball-screw nut. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 337-347. ISBN 9781853129902

Jiang, Xiang and Blunt, Liam (2003) Surface analysis techniques to optimise the performance of CNC machine tools. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 107-117. ISBN 9781853129902

Kennedy, Allan and Ford, Derek G. (2003) From manual grinding to CNC Automation - a major step forward for the rod mill. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 579-588. ISBN 9781853129902

Liang, Bo, Iwnicki, S. and Ball, Andrew (2003) Asymmetrical stator and rotor faulty detection using vibration, phase current and transient speed analysis. Mechanical Systems and Signal Processing, 17 (4). pp. 857-869. ISSN 0888-3270

Liu, X. and Gao, F. (2003) A novel multi-function tribological probe microscope for mapping surface properties. Measurement Science and Technology, 15 (1). pp. 91-102. ISSN 0957-0233

Liu, X.W., Cheng, K., Webb, D., Longstaff, Andrew P., Widiyarto, Muhammad Helmi Nur, Jiang, Xiang, Blunt, Liam and Ford, Derek G. (2003) Investigation of the cutting force coefficients in ball-end milling. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 45-54. ISBN 9781853129902

Lockwood, S., Haase, Frerk and Ford, Derek G. (2003) Active vibration control of machine tool structures - Part 1: DSP algorithms. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 441-450. ISBN 9781853129902

Longstaff, Andrew P., Fletcher, Simon and Ford, Derek G. (2003) Practical experience of thermal testing with reference to ISO 230 Part 3. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 473-483. ISBN 9781853129902

Mavromihales, Mike, Mason, J. and Weston, Bill (2003) A case of reverse engineering for the manufacture of wide chord fan blades (WCFB) used in Rolls Royce aero engines. Journal of Materials Processing Technology, 134 (3). pp. 279-286. ISSN 0924-0136

Moreno-Castaneda, V.Y., Pislaru, Crinela, Freeman, J.M. and Ford, Derek G. (2003) Modelling and simulation of a feed drive using the transmission line modelling technique. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 193-202. ISBN 9781853129902

Myers, Alan, Ford, Derek G. and Xu, Qiang (2003) Finite element analysis of the structural dynamics of a vertical milling machine. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 431-440. ISBN 9781853129902

Payne, B.S., Gu, Fengshou, Webber, C J S and Ball, Andrew (2003) Componential coding in the condition monitoring of electrical machines Part 2: application to a conventional machine and a novel machine. Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science, 217 (8). pp. 901-915. ISSN 0954-4062

Pislaru, Crinela, Ford, Derek G. and Freeman, J.M. (2003) Identification of modal parameters affecting the dynamic performance of CNC machine tools. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 161-170. ISBN 9781853129902

Sophian, Ali (2003) Characterisation of surface and sub-surface discontinuities in metals using pulsed eddy current sensors. Doctoral thesis, University of Huddersfield.

Sophian, Ali, Tian, Gui Yun, Taylor, D. and Rudlin, J. (2003) Flaw detection and quantification for ferromagnetic steels using pulsed eddy current techniques and magnetization. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 381-390. ISBN 9781853129902

Wang, X. and Morrish, L. (2003) Worm gear meshing stiffness calculations based on experiments. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 371-379. ISBN 9781853129902

Widiyarto, Muhammad Helmi Nur, Ford, Derek G. and Pislaru, Crinela (2003) Evaluating the structural dynamics of a vertical milling machine. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 421-430. ISBN 9781853129902

Wright, James, Kukla, Peter, Ball, Andrew, Gu, Fengshou and Bann, John (2003) A Novel Electrostatic Method of Ultrafine PM Control Suitable for Low Exhaust Temperature Applications. SAE Technical Papers. ISSN 0148-7191

Xu, Qiang and Barrans, Simon (2003) The Development of multi-axial creep damage constitutive equations for 0.5Cr0.5Mo0.25V ferritic steel at 590.DEG.C.. JSME International Journal Series A, 46 (1). pp. 51-59. ISSN 13447912

Xu, Qiang, Cunningham, J. and Ford, Derek G. (2003) The improvement of geometric accuracy of FMS machine through retrofitting and compensation. International Journal for Manufacturing Science and Production, 5 (1/2). pp. 67-72. ISSN 0793-6648

Xu, Qiang, Miller, B. and Ford, Derek G. (2003) A review of the fundamentals of the finite element simulation of metal cutting. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 391-399. ISBN 9781853129902

2002

Baydar, N, Ball, Andrew and Payne, B.S. (2002) Detection of incipient gear failures using statistical techniques. IMA Journal of Management Mathematics, 13 (1). pp. 71-79. ISSN 1471-678X

Bills, Paul J., Hardaker, Cath, Goldsmith, Andrew, Smith, Simon, Isaac, Graham and Dowson, Duncan (2002) Differential wear between femoral heads and acetabular cup inserts in metal-on-metal total replacement joints. In: Institution of Mechanical Engineers – ‘Engineers and Surgeons – Joined at the Hip’, 13-15 June 2002, London, UK. (Unpublished)

Chen, Xun (2002) Precision grinding using CBN wheels. International Journal of Machine Tools and Manufacture, 42 (5). pp. 585-593. ISSN 0890-6955

Chen, Xun (2002) The sharpness of grinding wheels: an important measure of grinding behaviour. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216 (5). pp. 829-832. ISSN 0954-4054

Cunningham, J., Xu, Qiang and Ford, Derek G. (2002) A case study on practical error correction practices utilised on a CNC machine tool. In: Advances in Manufacturing Technology XVI. Wiley, pp. 361-366. ISBN 9781860583780

Fieldhouse, John D. and Beveridge, Carl (2002) Experimental observations of hot judder. In: FISITA 2002 World Automotive Congress, 2nd-7th June 2002, Helsinki.

Fieldhouse, John D., Beveridge, Carl and Talbot, Chris J. (2002) Thermal and holographic investigations of a noisy commercial disc brake. In: FISITA 2002 World Automotive Congress, 2nd-7th June 2002, Helsinki.

Fieldhouse, John D., Beveridge, Carl and Talbot, Chris J. (2002) Visual noise investigation of a four piston opposed type Calliper Disc Brake using the technique of holographic interferometry. In: FISITA 2002 World Automotive Congress, 2nd-7th June 2002, Helsinki.

Fieldhouse, John D. and Talbot, Chris J. (2002) Investigation of data from disc brakes generating noise using laser holography. In: FISITA 2002 World Automotive Congress, 2nd-7th June 2002, Helsinki.

Fieldhouse, John D. and Talbot, Chris J. (2002) Investigation of drum brake noise from a brake mounted on a half vehicle test rig. In: 20th Annual Brake Colloquium And Exhibition, October 2002, Phoenix, AZ, USA.

Fieldhouse, John D., Talbot, Chris J., Beveridge, Carl and Steel, William P. (2002) Holographic interferometry used to investigate noise from a drum brake mounted on a half vehicle test rig. In: Braking 2002. Wiley, pp. 25-42. ISBN 9781860583711

Lei, Dongdong, Anderson, Iain J. and Cox, M.G. (2002) A robust algorithm for least absolute deviation curve fitting. In: Algorithms for approximation IV. University of Huddersfield, Huddersfield, pp. 470-477. ISBN 9781862180406

Levesley, Jeremy, Anderson, Iain J. and Mason, John C. (2002) Algorithms for Approximation IV. University of Huddersfield, Huddersfield. ISBN 9781862180406

Li, W, Parkin, Robert M, Coy, Joanne and Gu, Fengshou (2002) Acoustic based condition monitoring of a diesel engine using self-organising map networks. Applied acoustics, 63 (7). pp. 699-711. ISSN 0003-682X

Liu, S, Gu, Fengshou and Ball, Andrew (2002) The on-line detection of engine misfire at low speed using multiple feature fusion with fuzzy pattern recognition. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 216 (5). pp. 391-402. ISSN 0954-4070

Liu, X., Bell, T., Gao, F. and Chetwynd, D. G. (2002) Characterisation of engineered surfaces by a multi-function tribological probe microscope. In: EUSPEN International Conference 2002. EUSPEN, pp. 719-722.

Longstaff, Andrew P. (2002) Methods of evaluation of the positioning capability of Cartesian and non-Cartesian machines. Doctoral thesis, University of Huddersfield.

Longstaff, Andrew P. (2002) An introduction to machine tool testing. In: Dimensional Metrology Awareness Club, Gear Metrology Special Interest Group Meeting, June 2002, David Brown Textron Power Transmissions, Huddersfield. (Unpublished)

Mason, John C. and Crampton, Andrew (2002) Application of orthogonalisation procedures for Gaussian radial basis function and Chebyshev polynomials. In: Algorithms for approximation IV. University of Huddersfield, Huddersfield, pp. 236-243. ISBN 9781862180406

Mishra, Rakesh, Singh, Sidh and Seshadri, V. (2002) Velocity distribution in horizontal pipes conveying non-uniform particles. International Journal of Fluid Mechanics Research, 29 (6). pp. 760-778. ISSN 1064-2277

Payne, B.S., Husband, M. and Ball, Andrew (2002) Development of condition monitoring techniques for a transverse flux motor. In: International Conference on Power Electronics Machines and Drives. IET, pp. 139-144. ISBN 0-85296-747-0

Pislaru, Crinela, Ford, Derek G. and Freeman, J.M. (2002) On modular modelling of CNC machine tool drives: a comparison between simulation and experimentation. In: OPTIM 2002, 2002, Romania. (Unpublished)

Pislaru, Crinela, Ford, Derek G. and Holroyd, Geoffrey (2002) Modelling non-linearities from CNC machine tool drives. In: OPTIM 2002, 2002, Romania. (Unpublished)

Ramasawmy, H. and Blunt, Liam (2002) 3D surface topography assessment of the effect of different electrolytes during electrochemical polishing of EDM surfaces. International Journal of Machine Tools and Manufacture, 42 (5). pp. 567-574. ISSN 0890-6955

Talbot, Chris J. and Fieldhouse, John D. (2002) Animations of a disc brake generating noise. SAE Transactions Journal of Passenger Cars: Mechanical Systems 110, 110 (Sectio). pp. 2391-2397.

Talbot, Chris J. and Fieldhouse, John D. (2002) Investigation of the time development of disc brakes generating noise using laser holography. In: Braking 2002: from the driver to the road. Wiley, pp. 85-100. ISBN 9781860583711

Talbot, Chris J. and Fieldhouse, John D. (2002) Investigations of in-plane disc vibration using laser holography. SAE Transactions Journal of Passenger Cars: Mechanical Systems 110. pp. 2202-2208.

Tong, R.P., Crampton, Andrew and Trefethen, A.E. (2002) What are 'good' points for local interpolation by radial basis functions? In: Algorithms for Approximation IV. University of Huddersfield, Huddersfield, pp. 260-267. ISBN 9781862180406

Weston, William, Mavromihales, Mike and Mason, J. (2002) A Reverse Engineering application for improved manufacture of Wide Chord fan blades (WCFB) used in aero engines. International Journal of Engineering Simulation, 3 (2). pp. 3-8. ISSN 1468-1137

Xu, Qiang, Cunningham, J. and Ford, Derek G. (2002) The improvement of geometric accuracy of FMS machine through retrofitting and compensation. In: Advances in Manufacturing Technology XVI: Proceedings of the Eighteenth National Conference on Manufacturing Research, Leeds Metropolitan University, UK, 10-12 September 2002. John Wiley and Sons, pp. 441-448. ISBN 9781860583780

Xu, Qiang and Ford, Derek G. (2002) Analytical and FE Identification of lowest natural frequency of a ball-screw drive in beaver machine. In: Advances in Manufacturing Technology XVI: Proceedings of the Eighteenth National Conference on Manufacturing Research, Leeds Metropolitan University, UK, 10-12 September 2002. John Wiley and Sons, pp. 247-251. ISBN 9781860583780

Xu, Zhijie (2002) A novel virtual environment construction approach for manufacturing simulations. European Journal of Mechanical Engineering, Winter. pp. 203-208. ISSN 1371-6980

2001

Baydar, N and Ball, Andrew (2001) Detection of incipient tooth defect in helical gears using multivariate statistics. Mechanical Systems and Signal Processing, 15 (2). pp. 303-321. ISSN 0888-3270

Baydar, N and Ball, Andrew (2001) A comparative study of acoustic and vibration signals in detection of gear failures using Wigner-Ville distribution. Mechanical Systems and Signal Processing, 15 (6). pp. 1091-1107. ISSN 0888-3270

Blunt, Liam and Stout, K.J. (2001) 8th International Conference on Metrology and Properties of Engineering Surfaces26–29 April 2000, University of Huddersfield, UK. International Journal of Machine Tools and Manufacture, 41 (13-14). p. 1845. ISSN 0890-6955

Crampton, Andrew, Mason, John C. and Turner, D.A. (2001) Approximating semi-structure data with different errors using support vector machine regression. In: Mathematical methods for curves and surfaces. Innovations in applied mathematics . Vanderbilt University Press, Nashville, pp. 63-72. ISBN 9780826513786

Dalgarno, K.W., Stewart, T.D. and Allport, John (2001) Layer manufactured production tooling incorporating conformal heating channels for transfer moulding of elastomer compounds. Plastics, Rubber and Composites, 30 (8). pp. 384-388. ISSN 1465-8011

Fieldhouse, John D. and Beveridge, Carl (2001) Extending the Understanding of Brake Noise – An Investigation of a Noisy Twin Calliper Disc Brake. In: 8th European Automotive Congress European Automobile Engineers Cooperation (EAEC) 2001: Europe and the 2nd Century of Auto-Mobility, 18-20 June 2001, Bratislava, Slovakia.

Fieldhouse, John D. and Beveridge, Carl (2001) Investigation of Disc Brake Noise Using a Heretical Technique. In: 8th European Automotive Congress European Automobile Engineers Cooperation (EAEC) 2001: Europe and the 2nd Century of Auto-Mobility, 18-20 June 2001, Bratislava, Slovakia.

Fieldhouse, John D. and Beveridge, Carl (2001) Noise Reduction of a Twin Calliper Disc Brake by Angular Positioning of the Callipers. In: INCE conference proceedings 2001. International Institute of Noise Control Engineering (INCE), pp. 1476-1479. ISBN 9080655430

Fieldhouse, John D. and Beveridge, Carl (2001) An experimental investigation of hot judder. In: Proceedings of the 19th Annual Brake Colloquium and Exhibition. SAE International, pp. 85-94. ISBN 0-7680-0823-9

Fletcher, Simon, Postlethwaite, S. R. and Ford, Derek G. (2001) Volumetric compensation through the machine controller. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 321-330. ISBN 9781853128905

Ford, Derek G., Pislaru, Crinela and Freeman, J.M. (2001) Improving CNC machine tools performance by using modular approach. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 301-312. ISBN 9781853128905

Freeman, J.M. and Ford, Derek G. (2001) The reconstruction of cyclically perturbed signals from aliased data. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 313-320. ISBN 9781853128905

Freeman, J.M., White, A.J. and Ford, Derek G. (2001) Ball-screw thermal errors - a finite element simulation for on-line estimation. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 269-278. ISBN 9781853128905

Hasse, F., Lockwood, S. and Ford, Derek G. (2001) Vibration modelling of machine tool structures. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 137-146. ISBN 9781853128905

Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2001) Identification of damping elements in CNC machine tool drive. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 289-299. ISBN 9781853128905

Jiang, Xiang and Blunt, Liam (2001) Advances in surface analysis technology. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 247-258. ISBN 9781853128905

Jiang, Xiang, Blunt, Liam and Stout, K.J. (2001) Lifting wavelet for three-dimensional surface analysis. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2163-2169. ISSN 0890-6955

Li, W, Gu, Fengshou, Ball, Andrew, Leung, A Y T and Phipps, C E (2001) A study of the noise from diesel engines using the independent component analysis. Mechanical Systems and Signal Processing, 15 (6). pp. 1165-1184. ISSN 0888-3270

Liu, X. and Gao, F. (2001) Multi-function evaluation of surfaces at micro/nano scales by a new tribological probe microscope. In: 2nd euspen International Conference, 27-31, May 2001, Turin, Italy.

Longstaff, Andrew P., Postlethwaite, S. R. and Ford, Derek G. (2001) Assessment of the volumetric accuracy of a machine with geometric compensation. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 41-50. ISBN 9781853128905

Lucas, Gary and Jin, N.D. (2001) Investigation of a drift velocity model for predicting superficial velocities of oil and water in inclined oil-in-water pipe flows with a centre body. Measurement Science and Technology, 12 (9). pp. 1546-1554. ISSN 09570233

Lucas, Gary and Jin, N.D. (2001) A new kinematic wave model for interpreting cross correlation velocity measurements in vertically upward, bubbly oil-in-water flows. Measurement Science and Technology, 12 (9). pp. 1538-1545. ISSN 09570233

Mishra, Rakesh, Fabien, C., Singh, S.N. and Seshadri, V. (2001) Holdup in multisized particulate solid-liquid flow through horizontal pipe. Indian Journal of Engineering & Materials Sciences, 8. pp. 84-89. ISSN 0971-4588

Munro, R. G., Palmer, Derrol and Morrish, L. (2001) An experimental method to measure gear tooth stiffness throughout and beyond the path of contact. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 215 (7). pp. 793-803. ISSN 09544062

Pislaru, Crinela (2001) Parameter identification and hybrid mathematical modelling techniques applied to non-linear control systems. Doctoral thesis, University of Huddersfield.

Sasi, A.B., Payne, B.S., Gu, Fengshou and Ball, Andrew (2001) The Exploitation of Instantaneous Angular Spped for Condition Monitoring of Electric Motors. In: Proceedings of the 14th International Congress on Condition Monitoring and Diagnostic Engineering Management, 4-6 September 2001, Manchester. (Unpublished)

Stout, K.J. and Blunt, Liam (2001) A contribution to the debate on surface classifications—random, systematic, unstructured, structured and engineered. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2039-2044. ISSN 0890-6955

Talbot, Chris J. and Fieldhouse, John D. (2001) Animations of a disc brake generating noise. In: Proceedings of the 19th Annual Brake Colloquium and Exhibition. Society of Automotive Engineers (SAE), pp. 23-30. ISBN 0768008239

Talbot, Chris J. and Fieldhouse, John D. (2001) Generating 3-dimensional animations of vehicle brake noise. In: SAE 2001 Transactions Journal of Passenger Cars - Mechanical Systems. SAE International, pp. 2648-2654. ISBN 0768011027

Talbot, Chris J. and Fieldhouse, John D. (2001) Graphical and Mathematical Representations of a Real Brake System. In: 8th European Automotive Congress European Automobile Engineers Cooperation (EAEC) 2001: Europe and the 2nd Century of Auto-Mobility, 18-20 June 2001, Bratislava, Slovakia.

Talbot, Chris J. and Fieldhouse, John D. (2001) Mathematical representation of disc brake squeal using laser holography. In: INCE conference proceedings 2001. International Institute of Noise Control Engineering (INCE), pp. 1081-1084. ISBN 9080655430

Unver, Ertu and Mavromihales, Mike (2001) Design and Development of an interactive 3D CNC Computer Aided Learning Program. In: 17th International Conference on CAD/CAM, Robotics and Factories of Future, 10-12 July 2001, Durban, South Africa.

Wang, Kaiwei, Blunt, Liam, Mao, L.T., Chao, C.C. and Stout, K.J. (2001) The effects of operational parameters on surface characteristics of the ballised material. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2071-2078. ISSN 0890-6955

White, A.J., Postlethwaite, S. R. and Ford, Derek G. (2001) Measuring and modelling thermal distortion on CNC machine tools. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 69-79. ISBN 9781853128905

White, A.J., Postlethwaite, S. R. and Ford, Derek G. (2001) A general purpose thermal error compensation system for CNC machine tools. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 3-13. ISBN 9781853128905

Xiao, Shaojun, Jiang, Xiang, Blunt, Liam and Scott, Paul J. (2001) Comparison study of the biorthogonal spline wavelet filtering for areal rough surfaces. International Journal of Machine Tools and Manufacture, 41 (13-14). pp. 2103-2111. ISSN 08906955

Xu, L. J., Tian, G.Y., Duan, Y. and Yang, S. X. (2001) Inverse kinematic analysis for triple-octahedron variable-geometry truss manipulators. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 215 (2). pp. 247-251. ISSN 09544062

Xu, Qiang (2001) Creep damage constitutive equations for multi-axial states of stress for 0.5Cr0.5Mo0.25V ferritic steel at 590°C. Theoretical and Applied Fracture Mechanics, 36 (2). pp. 99-107. ISSN 0167-8442

Xu, Qiang (2001) The development of phenomenological multi-axial isotropic creep damage constitutive equations. In: Mechanics and Material Engineering for Science and Experiments. Science Press, London, UK, pp. 457-460. ISBN 1-880132-79-6

2000

Banawi, K.A., Fieldhouse, John D. and Talbot, Chris J. (2000) 3-Dimensional animation of a real disc brake generating noise. In: 25th ISMA Noise and Vibration Conference, 13th - 15th September 2000, Katholiecke Universiteit Leuven, Belgium.

Baydar, N and Ball, Andrew (2000) Detection of gear deterioration under varying load conditions by using the instantaneous power spectrum. Mechanical Systems and Signal Processing, 14 (6). pp. 907-921. ISSN 0888-3270

Beveridge, Carl, Fieldhouse, John D. and Talbot, Chris J. (2000) The technique of holographic interferometry used to investigate a noisy commercial disc brake. In: 25th ISMA Noise and Vibration Conference, 13th - 15th September 2000, Katholiecke Universiteit Leuven, Belgium.

Chen, Xun (2000) Analysis of the transitional temperature for tensile residual stress in grinding. Journal of Materials Processing Technology, 107 (1-3). pp. 216-221. ISSN 0924-0136

Desforges, M J, Jacob, P J and Ball, Andrew (2000) Fault detection in rotating machinery using kernel-based probability density estimation. International Journal of Systems Science, 31 (11). pp. 1411-1426. ISSN 0020-7721

Fieldhouse, John D. (2000) A study of the interface pressure distribution between pad and rotor, the coefficient of friction and calliper mounting geometry with regard to brake noise. In: Brakes 2000: international conference on automotive braking technologies for the 21st Century. Wiley. ISBN 9781860582615

Gao, F. and Liu, X (2000) Development of a new multi-function tribological Microscope. In: 1st euspen Topical Conference on Fabrication and Metrology in Nanotechnology and 2nd Annual General Meeting of euspen, 31 May - 2 June, 2000, Copenhagen, Denmark.

Gao, F. and Liu, X. (2000) A multi-functional tribological probe microscope for surface and surface related properties. In: The euspen nanotechnology workshop and Joint Warwick-Tokyo Nanotechnology Symposium, Sep. 2000, Warwick, UK.

Gu, Fengshou, Ball, Andrew and Li, W (2000) The Condition Monitoring of Diesel Engines Using Acoustic Measurements-Part 1: Acoustic Characteristics of the Engine and Representation of the Acoustic Signals. SAE Technical Papers. ISSN 0148-7191

Gu, Fengshou, Ball, Andrew and Li, W (2000) The Condition Monitoring of Diesel Engines Using Acoustic Measurements-Part 2: Fault Detection and Diagnosis. SAE Technical Papers. ISSN 0148-7191

Jiang, Xiang, Blunt, Liam and Stout, K.J. (2000) Development of a lifting wavelet representation for surface characterization. Proceedings of The Royal Society A Mathematical Physical and Engineering Sciences, 456 (2001). pp. 2283-2313. ISSN 13645021

Kendall, S. R. and Rao, H.V. (2000) Detection of multiple solutions using a mid-cell back substitution technique applied to computational fluid dynamics. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 214 (11). pp. 1401-1407. ISSN 09544062

Little, David, Hall, David, Rhymer, S. and Lee, H. L. (2000) The development of a late configuration tool and procedural ethos within SMEs. In: Advances in Manufacturing Technology. Wiley, London, UK, pp. 203-207. ISBN 978-1-86058-267-7

Stout, K.J. and Barrans, Simon (2000) The design of aerostatic bearings for application to nanometre resolution manufacturing machine systems. Tribology International, 33 (12). pp. 803-809. ISSN 0301-679X

Stout, K.J. and Blunt, Liam (2000) Three dimensional surface topography. Penton, London, UK. ISBN 1857180267

Talbot, Chris J., Banawi, K.A. and Fieldhouse, John D. (2000) Generating 3-Dimensional animations of vehicle brake noise. In: Brake Colloquium and Engineering Display 2000 Proceedings. Society of Automotive Engineers (SAE), pp. 1-8. ISBN 9780768006452

Talbot, Chris J. and Fieldhouse, John D. (2000) Generating 3-Dimensional Animations of Vehicle Brake Noise. In: Proceedings of the 18th annual Brake Colloquium & Engineering Display. SAE International, pp. 105-110. ISBN 9780768006452

Xu, Qiang (2000) Development of constitutive equations for creep damage behaviour under multi-axial states of stress. In: Advances in Mechanical Behaviour, Plasticity and Damage. Elsevier, London, UK, pp. 1375-1382. ISBN 978-0-08-042815-4

Xu, Qiang, Hartley, P. and Pillinger, I. (2000) Elastic–plastic finite element investigation of the effect of the aspect ratio on curvature in the roll–platen forming process. Journal of Materials Processing Technology, 104 (1-2). pp. 25-33. ISSN 0924-0136

Xu, Zhijie, Zhao, Zhengxu and Baines, R. W. (2000) Construction of configurable virtual manufacturing environments. In: Proceedings of the 33rd International MATADOR Conference. Springer Verlag, London, UK, pp. 145-150. ISBN 1-85233-323-5

1999

Chen, Xun, Rowe, W. Brian, Allanson, D.R. and Mills, B. (1999) A Grinding Power Model for Selection of Dressing and Grinding Conditions. Journal of Manufacturing Science and Engineering, 121 (4). pp. 632-637. ISSN 1087-1357

Ford, Derek G., Longstaff, Andrew P., Freeman, J.M. and Postlethwaite, S. R. (1999) Practical calibration of tracking laser systems. In: 4th International Conference on Laser Metroogy and Machine Performance, 13 to 15 July 1999, Longhirst Hall, Northumberland.

Mills, B, Chen, Xun, Rowe, W. Brian and Li, Y (1999) Study and selection of grinding conditions Part 2: a hybrid intelligent system for selection of grinding conditions. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 213 (2). pp. 131-142. ISSN 0954-4054

Rowe, W. Brian and Chen, Xun (1999) Modelling surface roughness improvement in grinding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 213 (1). pp. 93-96. ISSN 0954-4054

Xu, Zhijie, Zhao, Z. X. and Baines, R. W. (1999) A virtual environment for manufacturing simulation. In: ICPR-15 Manufacturing for a Global Market: Proceedings of the Fifteenth Conference of the International Foundation for Production Research ; 9th-12th August 1999. The Fifteenth Conference of the International Foundation for Production Research, Limerick, Ireland. ISBN 1-874653-56-9

1998

Chen, Xun (1998) Analysis and simulation of the grinding process. Part IV: Effects of wheel wear. International Journal of Machine Tools and Manufacture, 38 (1-2). pp. 41-49. ISSN 0890-6955

Chen, Xun (1998) Life cycle model of the grinding process. Computers in Industry, 36 (1-2). pp. 5-11. ISSN 0166-3615

Fieldhouse, John D. and Rennison, Martin J. (1998) The value of noise fix shims - a case study. In: The second international seminar on automotive braking: recent developments and future trends. Professional Engineering Publishing, pp. 27-48. ISBN 9781860581311

Fish, Michael Anderson (1998) Transmission errors in precision worm gear drives. Doctoral thesis, University of Huddersfield.

1997

Boyle, A, Chen, Xun, Rowe, W. Brian and Allanson, D.R. (1997) Automatic dwell control in computer numerical control plunge grinding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 211 (7). pp. 565-575. ISSN 0954-4054

Fieldhouse, John D. and Rennison, M. (1997) Proposals for the Classification of Brake Noise-An Equivalent Noise Dose Rating. In: Annual Brake Colloquium And Engineering Display, October 1997, Tempe, Arizona, USA.

Fieldhouse, John D. and Rennison, M. (1997) Proposals for the classification of brake noise - an equivalent noise dose rating. In: 15th Annual SAE Brake Colloquium, Phoenix, Arizona.

Rowe, W. Brian and Chen, Xun (1997) Characterization of the size effect in grinding and the sliced bread analogy. International Journal of Production Research, 35 (3). pp. 887-899. ISSN 0020-7543

Rowe, W. Brian, Li, Yan, Chen, Xun and Mills, B. (1997) An Intelligent Multiagent Approach for Selection of Grinding Conditions. CIRP Annals - Manufacturing Technology, 46 (1). pp. 233-238. ISSN 0007-8506

Unver, Ertu (1997) Design, development and manufacturing of a carbonmonoxide sensor device. [Artefact]

Xu, Zhijie, Zhao, Z. X., Wu, M.H., Liao, J. B. and Tian, G.Y. (1997) Virtual Reality Based Robot Graphic Simulation and Virtual Manufacturing System. In: Proceedings of the 1997 Chinese Automation Conference in the UK (CACUK’97). The 1997 Chinese Automation Conference in the UK (CACUK’97), UMIST, Manchester.

Yesilyurt, Isa and Ball, Andrew (1997) An Advanced Approach to the Bending Fatigue in Spur Gears. Maintenance & Asset Management Journal, 12 (4). pp. 28-34. ISSN 1748-5290

1996

Allport, John and Day, A. J. (1996) Statistical Mechanics Material Model for the Constitutive Modelling of Elastomeric Compounds. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 210 (6). pp. 575-585. ISSN 0954-4062

Chen, Xun (1996) Analysis and simulation of the grinding process. Part I: Generation of the grinding wheel surface. International Journal of Machine Tools and Manufacture, 36 (8). pp. 871-882. ISSN 0890-6955

Chen, Xun (1996) Analysis and simulation of the grinding process. Part II: Mechanics of grinding. International Journal of Machine Tools and Manufacture, 36 (8). pp. 883-896. ISSN 0890-6955

Chen, Xun (1996) Analysis and simulation of the grinding process. Part III: Comparison with experiment. International Journal of Machine Tools and Manufacture, 36 (8). pp. 897-906. ISSN 0890-6955

Fieldhouse, John D. (1996) Drum brake noise - a theoretical and visual approach. In: Advances in automotive braking technology: design analysis and materials developments. Professional Engineering Publishing, London. ISBN 9781860580390

Fieldhouse, John D. and Newcomb, T.P. (1996) Double pulsed holography used to investigate noisy brakes. Optics and lasers in engineering, 25 (6). pp. 455-494. ISSN 0143-8166

Gu, Fengshou and Ball, Andrew (1996) Automating the Diagnosis of Valve Faults in Reciprocating Compressors. Maintenance & Asset Management Journal, 11 (3). pp. 19-22. ISSN 1748-5290

Jacob, Phillip, Ingram, Sarah and Ball, Andrew (1996) FieldBus: The Basis for an Open Architecture Condition Monitoring Revolution. Maintenance & Asset Management Journal, 11 (5). pp. 3-9. ISSN 1748-5290

Kelly, P.F. and Weston, William (1996) A Core Curriculum for the Education of Manufacturing Engineers for the 21st Century - The Conflict between Breadth and Depth. Technical Report. SME.

Koc, Erdem and Unver, Ertu (1996) Analysis of cutting forces in CNC turning operations: Experimental case study. Pamukkale University Journal of Engineering Sciences, 2 (4). pp. 47-53.

Liang, Bo, Gu, Fengshou and Ball, Andrew (1996) A Preliminary Investigation of Valve Fault Diagnosis in Reciprocating Compressors. Maintenance & Asset Management Journal, 11 (2). pp. 2-8. ISSN 1748-5290

1995

Ball, Andrew and Gu, Fengshou (1995) A Basis for the Vibration Monitoring of Diesel Fuel Injectors. Maintenance & Asset Management Journal, 10 (2). pp. 24-30. ISSN 1748-5290

Fieldhouse, John D. (1995) Holographic and Analytical Techniques Applied to Drum Brake Squeal. In: 5th European Automotive Congress European Automobile Engineers Cooperation (EAEC) 1995: The European Automotive Industry meets the Challenges of the Year 2000, 21 - 23 June 1995, Strasbourg, France. (Unpublished)

Gu, Fengshou and Ball, Andrew (1995) Use of the Smoothed Pseudo-Wigner-Ville Distribution. Maintenance & Asset Management Journal, 10 (2). pp. 16-23. ISSN 1748-5290

Ngu, Jude T.A. (1995) The effects of turbulence on organ sound quality and its minimisation in blowing systems. Doctoral thesis, University of Huddersfield.

1994

Allport, John (1994) Computer-Aided Engineering and Design of Engineering Rubber Components. Doctoral thesis, University of Bradford.

Ball, Andrew (1994) Plant Monitoring and Diagnostics in a B. Eng. Degree Course. Maintenance & Asset Management Journal, 9 (1). pp. 12-18. ISSN 1748-5290

Chen, Xun, Allanson, D.R., Thomas, A, Moruzzi, J and Rowe, W. Brian (1994) Simulation of feed cycles for grinding between centres. International Journal of Machine Tools and Manufacture, 34 (5). pp. 603-616. ISSN 0890-6955

Fieldhouse, John D. and Newcomb, T.P. (1994) Self-excited brake noise investigation using the technique of classical holographic interferometry. In: First International Conference on Vibration Measurements by Laser Techniques: Advances and Applications Proceedings. SPIE Proceedings, 2358 . SPIE, pp. 346-358. ISBN 9780819416971

1993

Day, A.J., Allport, John, Fischer, W.P., Coates, P. and Mimaroglu, A. (1993) Finite element modelling of polymer deformation processes. In: AQUABUS User's Conference 1993, June 1993, Rhode Island, USA.

Fieldhouse, John D. (1993) The Application of Holographic Interferometry to the Study of Disc Brake Noise. In: SAE International Congress & Exposition, 1 - 5 March 1993, Detroit, MI, USA.

Fieldhouse, John D. (1993) Putting the brakes on brake noise. Machine Design. p. 26. ISSN 0024-9114

Fieldhouse, John D. (1993) Vibrational characteristics of a squealing disc brake. Journal Mobility & Vehicles Mechanics, 19 (2). ISSN 1450 - 5304

Fieldhouse, John D. (1993) The development of a visual recording process to aid the understanding of disc brake noise. In: 4th International EAEC Conference: Vehicle and Traffic Systems Technology, 16 - 18 June 1994, Strasbourg, France. (Unpublished)

1992

Fieldhouse, John D. (1992) The Technique of Holographic Interferometry used to Investigate Disc Brake Noise. In: 25th Silver Jubilee International Symposium on Automotive Technology and Automation (ISATA) : "Laser Applications for the Automotive Industry, 1 - 5 June 1992, Florence, Italy. (Unpublished)

Koc, Erdem and Unver, Ertu (1992) Theoretical investigation of desing parameters and performance of axial piston pumps. Journal of Engineers and Machinery, 393. pp. 21-27.

Lockwood, Stephen (1992) Design of an obstacle avoidance system for automated guided vehicles. Doctoral thesis, University of Huddersfield.

Postlethwaite, Scott R. (1992) Electronic based accuracy enhancement of CNC machine tools. Doctoral thesis, Huddersfield Polytechnic.

Unver, Ertu and Koc, Erdem (1992) A Study of developing an APT simulation program and its execution on a bench type lathe. In: 5th International Machine Design and Manufacturing Congress, METU, October 1992, Ankara, Turkey.

1991

Fieldhouse, John D. (1991) Disc Brake Noise - An Investigation Using Holographic Interferometry. In: Autotech 1991, November 1991, NEC Birmingham. (Unpublished)

Fieldhouse, John D. (1991) An Investigation Into Disc Brake Noise Using Holographic Interferometry. In: 3rd International Conference on Vehicle Dynamics and Powertrain Engineering: (EAEC) 1991, 11 - 13 June 1991, Strasbourg, France. (Unpublished)

Unver, Ertu and Koc, Erdem (1991) Drive systems in computer controlled machine tools. Journal of Engineers and Machinery (374). pp. 17-22.

1990

Koc, Erdem and Unver, Ertu (1990) Computer numerical controlled (CNC) machining types and the control systems. Journal of Engineers and Machinery, 31 (369). pp. 15-18.

Koc, Erdem, Unver, Ertu and Ozturk, Hidayet (1990) Design, manufacture and performance research of double acting hydraulic press. Journal of Engineers and Machinery, 31 (367). pp. 23-30.

1989

Chen, Xun and Zhengbai, Lin (1989) Probe into the Characteristics of Grinding Wheel Wear. Journal of fuzhou University, 17 (2). pp. 70-75. ISSN 1000-2243

1985

Changqi, Xu, Zhengbai, Lin and Chen, Xun (1985) Three dimensional dynamometer for cylindrical grinding. Journal of fuzhou University (3). pp. 82-97. ISSN 1000-2243

This list was generated on Mon Mar 18 16:53:17 2024 UTC.