Items where Subject is "TS Manufactures"

Article

Abdulshahed, Ali M., Longstaff, Andrew P., Fletcher, Simon and Potdar, Akshay (2016) Thermal error modelling of a gantry-type 5-axis machine tool using a Grey Neural Network Model. Journal of Manufacturing Systems, 41. pp. 130-142. ISSN 02786125

Abuaniza, Ayman, Fletcher, Simon, Mian, Naeem S. and Longstaff, Andrew P. (2016) Thermal Error Modelling of a CNC Machine Tool Feed Drive System using FEA Method. International Journal of Engineering Research & Technology, 5 (3). pp. 118-126. ISSN 2278-0181

Alegeh, Nurudeen E., Shagluf, Abubaker, Longstaff, Andrew P. and Fletcher, Simon (2019) Accuracy in Detecting Failure in Ballscrew Assessment Towards Machine Tool Servitization. International Journal of Mechanical Engineering and Robotics Research, 8 (5). pp. 667-673. ISSN 2278-0149

Alzarok, Hamza, Fletcher, Simon and Longstaff, Andrew P. (2017) 3D Visual Tracking of an Articulated Robot in Precision Automated Tasks. Sensors, 17 (1). ISSN 1424-8220

Awwad, Abdulkareem S., Al Khattab, Adel A. and Anchor, J.R (2013) Competitive Priorities and Competitive Advantage in Jordanian Manufacturing. Journal of Service Science and Management, 06 (01). pp. 69-79. ISSN 1940-9893

Blunt, Liam, Elrawemi, Mohamed, Fleming, Leigh and Sweeney, Francis (2013) Correlation of micro and nano–scale defects with WVTR for aluminium oxide barrier coatings for flexible photovoltaic modules. International Journal of Precision Technology, 3 (3). pp. 290-302. ISSN 1755-2060

Brierley, J.A., Cowton, Christopher J. and Drury, Colin (2006) The application of costs in make-or-buy decisions: an analysis. International Journal of Management, 23. pp. 794-800. ISSN 0813-0183

Bu, Weil, Qiao, Wen-Junl and Cai, Huifen (2011) An Empirical Study on the Effect of Value-Added Tax Transition on China's Equipment Manufacturing R&D Investment. Journal of Beijing Jiaotong University(Social Sciences Edition (4). pp. 17-20. ISSN 1672-8106

Burrows, J., Griffiths, B. and Scott, Paul J. (2001) The use of vectors for defining the three-dimensional texture and asymmetric directionality of turned specimens. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215 (2). pp. 125-134. ISSN 0954-4054

Cai, Huifen, Bu, W. and Xie, H. (2012) Analysis on China's equipment manufacturing security issues based on industrial control. Journal of Central University of Finance & Economics / Zhong Yang Cai Jing Da Xue Xue Bao / 中央財經大學學報 (3). pp. 62-66. ISSN 1000-1549

Calvert, Sophie, Power, Jess, Ryall, Helen and Bills, Paul J. (2014) Reconstructing textile heritage. Journal of Writing in Creative Practice, 7 (3). pp. 415-425. ISSN 1753-5190

Cao, Hang, Chen, Xiaomei, Grattan, K.T.V. and Sun, Yujiu (2002) Automatic micro dimension measurement using image processing methods. Measurement, 31 (2). pp. 71-76. ISSN 02632241

Cassidy, Tracy Diane (2016) Conceptualising sustained high quality fashion products in a devalue dominated marketplace. Fashion Practice: The Journal of Design, Creative Process and the Fashion Industry. ISSN 1756-9370

Cassidy, Tracy Diane (2017) Exploring the Garment Fit paradigm from a Sustainability Perspective and its Meaning for FirstCycle and Second-Cycle Fashion Retailers. Current Trends in Fashion Technology & Textile Engineering, 1 (3).

Chen, Xiaomei and Koenders, Ludger (2014) A novel pitch evaluation of one-dimensional gratings based on a cross-correlation filter. Measurement Science and Technology, 25 (4). 044007. ISSN 0957-0233

Chen, J. X., Liang, Y. C., Yuan, X., Wang, Z.G. and Tong, Zhen (2010) MD simulation of nanocutting process: removal mechanism, defects evolvement, and characterization</title>. Proceedings of SPIE, 7655. 76550J-76550J. ISSN 0277-786X

Chen, Xiaomei (1994) Threshold Optimization of interference image of surface roughness measuring interferometer. Acta Optica Sinica, 14 (11). pp. 1183-1186. ISSN 0253-2239

Chen, Xiaomei, Koenders, Ludger and Härtig, Frank (2011) Real-time cross-correlation filtering of a one-dimensional grating position-encoded signal. Measurement Science and Technology, 22 (8). 085105. ISSN 0957-0233

Chen, Xiaomei, Koenders, Ludger, Wolff, Helmut, Haertig, Frank and Schilling, Meinhard (2010) Atomic force microscope cantilever as an encoding sensor for real-time displacement measurement. Measurement Science and Technology, 21 (10). p. 105205. ISSN 0957-0233

Chen, Xiaomei, Koenders, Ludger, Wolff, Helmut and Härtig, Frank (2011) Tuning-Fork Atomic Force Microscope Cantilever Encoder and Applications for Displacement and In-Plane Rotation Angle Measurement. Procedia Engineering: Proceedings of Eurosensors XXV, September 4-7, 2011, Athens, Greece, 25. pp. 555-558. ISSN 1877-7058

Chen, Xiaomei, Koenders, Ludger, Wolff, Helmut, Neddermeyer, Holger and Haertig, Frank (2011) Atomic force microscope cantilevers as encoders for real-time forward and backward displacement measurements. Measurement Science and Technology, 22 (9). 094017. ISSN 0957-0233

Chen, Xiaomei and Long, Zuhong (1993) Automatic processing of interferogram from surface roughness measuring interferometer. Acta Optica Sinica, 13 (11). pp. 1040-1044. ISSN 0253-2239

Chen, Xiaomei, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2014) Analysing and evaluating a dual-sensor autofocusing method for measuring the position of patterns of small holes on complex curved surfaces. Sensors and Actuators A: Physical, 210. pp. 86-94. ISSN 0924-4247

Chen, Xiaomei, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2014) Deployment and evaluation of a dual-sensor autofocusing method for on-machine measurement of patterns of small holes on freeform surfaces. Applied Optics, 53 (10). pp. 2246-2255. ISSN 1559-128X

Chen, Xiaomei, Longstaff, Andrew P., Parkinson, Simon and Myers, Alan (2014) A Method for Rapid Detection and Evaluation of Position Errors of Patterns of Small Holes on Complex Curved and Freeform Surfaces. International Journal of Precision Engineering and Manufacturing, 15 (2). pp. 209-217. ISSN 2234-7593

Chen, Xiaomei, Ren, Dongmei and Li, Zhijun (1997) Surface Roughness interferogram processing system. Metrology & Measurement Technology, 17 (3). pp. 7-10. ISSN 1002-6061

Chen, Xiaomei, Wan, Yu, Koenders, Ludger and Schilling, Meinhard (2010) Measurements of dimensional standards and etalons with feature size from tens of micrometres to millimetres by using sensor strengthened nanomeasuring machine. Measurement, 43 (10). pp. 1369-1375. ISSN 02632241

Chen, Xiaomei, Wolff, Helmut and Koenders, Ludger (2012) Atomic force microscope cantilevers as encoder for real-time displacement measurements. Proceedings of SPIE - SPIE Defense, Security + Sensing, Baltimore, Md., 23-27, April, 2012, USA, 8378 (923005). 83780C-83780C. ISSN 0277786X

Chen, Xun (2009) Corrective Abrasive Polishing Processes for Freeform Surface. Key Engineering Materials, 404. pp. 103-112. ISSN 1013-9826

Chen, Xun (2002) The sharpness of grinding wheels: an important measure of grinding behaviour. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216 (5). pp. 829-832. ISSN 0954-4054

Chen, Xun and Feng, Zhengming (2003) Effectiveness of Laser Cleaning for Grinding Wheel Loading. Key Engineering Materials, 238-39. pp. 289-294. ISSN 1013-9826

Chen, Xun and Opoz, Tahsin Tecelli (2010) Simulation of Grinding Surface Creation – A Single Grit Approach. Advanced Materials Research, 126-28. pp. 23-28. ISSN 1662-8985

Coles, Alex (2013) Art Houses. ICON Magazine (119). pp. 108-115.

Cropper, M., Barlow, M., Perryman, M.A.C., Horne, K., Bingham, R., Page, M., Gutteridge, P. and Walker, D.D. (2003) A concept for a superconducting tunneling junction based spectrograph. Monthly Notices of the Royal Astronomical Society, 344. pp. 33-44. ISSN 0035-8711

Denton, Paul, Little, David, Weston, R.H and Guerrero, A. (2007) An enterprise engineering approach for supply chain systems design and implementation. International Journal of Services and Operations Management, 3 (2). pp. 131-151. ISSN 1744-2370

Dhimish, Mahmoud and Holmes, Violeta (2016) Fault detection algorithm for grid-connected photovoltaic plants. Journal of Solar Energy, 137 (C). pp. 236-245. ISSN 0038-092X

Dhimish, Mahmoud, Holmes, Violeta, Mehrdadi, Bruce and Dales, Mark (2018) Comparing Mamdani Sugeno fuzzy logic and RBF ANN network for PV fault detection. Renewable Energy, 117. pp. 257-274. ISSN 0960-1481

Dhimish, Mahmoud, Holmes, Violeta, Mehrdadi, Bruce, Dales, Mark and Mather, Peter (2017) Detecting Defective Bypass Diodes in Photovoltaic Modules using Mamdani Fuzzy Logic System. Global Journal of Researches in Engineering: F Electrical and Electronics Engineering, 17 (5). pp. 33-44. ISSN 0975-5861

Dhimish, Mahmoud, Holmes, Violeta, Mehrdadi, Bruce, Dales, Mark and Mather, Peter (2017) Output Power Enhancement for Hot Spotted Polycrystalline Photovoltaic Solar Cells. IEEE Transactions on Device and Materials Reliability. ISSN 1558-2574

Dhimish, Mahmoud, Holmes, Violeta, Mehrdadi, Bruce, Dales, Mark and Mather, Peter (2018) PV output power enhancement using two mitigation techniques for hot spots and partially shaded solar cells. Electric Power Systems Research, 158. pp. 15-25. ISSN 0378-7796

Diego, F., Brooks, D., Charalambous, A., Crawford, I.A., D'Arrigo, P., Dryburgh, M., Jamshidi, H., Radley, A.S., Savidge, T. and Walker, D.D. (1997) Conceptual design of the high-resolution optical spectrograph for the Gemini South Telescope. Proceedings of SPIE, 2871. pp. 1126-1134. ISSN 0277-786X

Diego, F., Fish, A., Barlow, M., Crawford, I., Spyromolio, J., Dryburgh, M., Brooks, D., Howarth, I. and Walker, D.D. (1995) The Ultra-High-Resolution Facility at the Anglo-Australian Telescope. Monthly Notices of the Royal Astronomical Society, 272 (2). pp. 323-332. ISSN 0035-8711

Diego, F. and Walker, D.D. (1985) On the possibility of increasing the throughput of astronomical spectrographs by overfilling the dispersing element. Monthly Notices of the Royal Astronomical Society, 217. pp. 347-354. ISSN 0035-8711

Dissanayake, D. G. K. and Sinha, Pammi (2012) Sustainable Waste Management Strategies in the Fashion Industry Sector. International Journal of Environmental, Cultural, Economic and Social Sustainability, 8 (1). pp. 77-90. ISSN 1832-2077

Dunn, C.R. and Walker, D.D. (2008) Pseudo-random tool paths for CNC sub-aperture polishing and other applications. Optics Express, 16 (23). pp. 18942-18949. ISSN 1094-4087

Durgun, Ismail, Cankaya, Oguzhan, Kus, Abdil and Unver, Ertu (2016) Application of carbon reinforced composites and rapid prototyping in low volume automotive production. Journal of Materials Testing, 58 (10). pp. 870-876. ISSN 0025-5300

Elbadawi, A. M. and Pearson, J. S. (2001) Crease-resist finish: What effect does the application process have? International Textile Bulletin, 47 (1). pp. 62-67. ISSN 1029-8525

Elbadawi, A. M. and Pearson, J. S. (2003) Foam Technology in Textile Finishing: A critical appreciation of recent developments. Textile Progress, 33 (4). ALL. ISSN 0040-5167

Elbadawi, A. M. and Pearson, J. S. (2002) Multi Factorial Analysis of Foam Properties. International Dyer, 187 (2). p. 28. ISSN 0020-658X

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh and Sweeney, Francis (2013) Further Development of Surface Metrology Methods for Predicting the Functional Performance of Flexible PV Barrier Films. Surface Topography: Metrology and Properties, 1 (1). 015006. ISSN 2051-672X

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh, Sweeney, Francis, Robbins, David and Bird, David (2015) Metrology of Al2O3 Barrier Film for Flexible CIGS Solar Cells. International Journal of Energy Optimization and Engineering (IJEOE), 4 (4). pp. 46-60. ISSN 2160-9500

Elrawemi, Mohamed, Blunt, Liam, Muhamedsalih, Hussam, Gao, F. and Fleming, Leigh (2015) Implementation of in Process Surface Metrology for R2R Flexible PV Barrier Films. International Journal of Automation Technology, 9 (3). pp. 312-321. ISSN 1883-8022

Evans, Claire, Allen, Claire and Shah, Karen (2014) Physical and Digital Environments:1) Engaging Fashion Design Students in Archival Research. International Journal of Costume and Fashion, 14 (1). pp. 63-73. ISSN 2288-7490

Faehnle, Oliver, Reynolds, Christina, Yu, Guoyu and Walker, D.D. (2017) Machine acceleration effects on computer controlled polishing. Optical Fabrication and Testing Conference Proceedings 2017.

Fischer, G., Bigerelle, M., Kubiak, K.J., Mathia, T.G., Khatir, Z. and Anselme, K. (2014) Wetting of anisotropic sinusoidal surfaces - experimental and numerical study of directional spreading. Surface Topography: Metrology and Properties, 2 (4). 044003. ISSN 2051-672X

Gao, F., Muhamedsalih, Hussam and Jiang, Xiang (2012) In-Process Fast Surface Measurement Using Wavelength Scanning Interferometry. Advanced Materials Research, 622-62. pp. 357-360. ISSN 1662-8985

Ghorani, B., Russell, S. J., Hebden, A. J. and Goswami, Parikshit (2017) Single Step Assembly of Biomolecule-loaded Sub-micron Polysulfone Fibers. Textile Research Journal, 87 (3). pp. 340-350. ISSN 0040-5175

Ghorani, B., Russell, Stephen J. and Goswami, Parikshit (2013) Controleld Morphology and Mechanical Characterisation of Electrospun Cellulose Acetate Fibre Webs. International Journal of Polymer Science, 2013. ISSN 1687-9422

Gray, C., Baker, I., Davies, G., Evans, R., Field, N., Fox-Leonard, T., Messelink, W., Mitchell, J., Rees, P., Waine, S., Walker, D.D. and Yu, G. (2013) Fast manufacturing of E-ELT mirror segments using CNC polishing. Proceedings of SPIE - The International Society for Optical Engineering, 8838. ISSN 0277-786X

Griffin, James Marcus and Chen, Xun (2009) Characteristics of the acoustic emission during horizontal single grit scratch tests: Part 2 classification and grinding tests. International Journal of Abrasive Technology, 2 (1). pp. 43-59. ISSN 1752-2641

Hall, David, Herr, G.H., McKinna, A. and Linde, H.J. (2001) Measuring innovation for agile manufacturing: insights and clarifications for management. International Society for Agile Manufacturing, 4 (1). pp. 85-95.

Han, Feng, Yang, Shuming, Jing, Weixuan, Wang, Liangjun, Li, Lei, Jiang, Zhuangde and Gao, Feng (2015) Effect of Ag Thin Films on the Photoluminescence of ZnO Films. Journal of Nanoscience and Nanotechnology, 15 (5). pp. 3796-3801. ISSN 1533-4880

Han, Sara Li-chou, Chan, Priscilla, Venkatraman, Praburaj, Apeagyei, Phoebe, Cassidy, Tracy Diane and Tyler, David (2016) Standard vs. Upcycled Fashion Design and Production. Fashion Practice: The Journal of Design, Creative Process and the Fashion Industry. ISSN 1756-9370

Han, W-Y., Clayton, M. and Walker, D.D. (1996) Steps Towards Efficient Mosaic CCD System. Publications of the Astronomical Society of the Pacific, 108. pp. 1028-1032. ISSN 0004-6280

Han, W.Y., Clayton, M.J. and Walker, D.D. (1996) Steps toward efficient mosaic CCD system design. Publications of the Astronomical Society of the Pacific, 108 (729). pp. 1028-1032. ISSN 0004-6280

Hardaker, Glenn (1998) An integrated approach towards product innovation in international manufacturing organisations. European Journal of Innovation Management, 1 (2). pp. 67-73. ISSN 14601060

Hardaker, Glenn and Ahmed, Pervaiz K. (1995) International approaches to computer-integrated manufacturing perspectives from Europe and Japan. European Business Review, 95 (2). pp. 28-39. ISSN 0955534X

Hardaker, Glenn, Ahmed, Pervaiz K. and Graham, Gary (1998) An integrated response towards the pursuit of fast time to market of NPD in European manufacturing organisations. European Business Review, 98 (3). pp. 172-177. ISSN 0955534X

Harness, David R., Marr, Norman E. and Goy, Tina (1998) The identification of weak products revisited. Journal of product and brand management, 7 (4). pp. 319-335. ISSN 1061-0421

He, Xiaocong, Baoying, Xing1, Kai, Zeng, Gu, Fengshou and Ball, Andrew (2013) Numerical and experimental investigations of self-piercing riveting. International Journal of Advanced Manufacturing Technology, 69 (1-4). pp. 715-721. ISSN 0268-3768

Hill, Philippa J., Taylor, Mark, Goswami, Parikshit and Blackburn, Richard S. (2017) Substitution of PFAS Chemistry in Outdoor Apparel and Impact on Repellency Performance. Chemosphere, 181. pp. 500-507. ISSN 0045-6535

Hongwei, J., King, C. and Walker, D.D. (2010) Measurement of influence function using swing arm profilometer and laser tracker. Optics Express. ISSN 1094-4087

Hongwei, J., King, C. and Walker, D.D. (2010) Simulation and validation of a prototype swing arm profilometer for measuring extremely large telescope mirror-segments. Optics Express. ISSN 1094-4087

Horrocks, A. R., Wang, M.Y., Hall, M. E., Sunmonu, Femi and Pearson, J. S. (2000) Flame retardant textile back-coatings. Part 2. Effectiveness of phosphorus-containing flame retardants in textile back-coating formulations. Polymer International, 49 (10). pp. 1079-1091. ISSN 09598103

Hua, Chen, Yan, Cao, Rujia, Zhao and Lu, Joan (2005) Product design scheme decision-making system based on CBR coupled with ANN. Proceedings of the Ninth International Conference on Computer Supported Cooperative Work in Design, 2005, 2. pp. 856-860. ISSN ISBN: 1-84600-002-5

Hua Tan, K., Denton, Paul, Rae, R. and Chung, L. (2013) Managing Lean Capabilities through Flexible Workforce Development: A Process and Framework. Production Planning and Control, 24 (12). pp. 1066-1076. ISSN 09537287

Huang, Shujun, Xie, Lili, Wang, Zhangying, Zhang, Zonghua, Gao, Feng and Jiang, Xiangqian (2015) Accurate projector calibration method by using an optical coaxial camera. Applied Optics, 54 (4). pp. 789-795. ISSN 0003-6935

Jiang, Xiang (2011) In situ real-time measurement for micro-structured surfaces. CIRP Annals - Manufacturing Technology, 60 (1). pp. 563-566. ISSN 0007-8506

Jiang, Xiang (2010) Robust solution for the evaluation of stratified functional surfaces. CIRP Annals - Manufacturing Technology, 59 (1). pp. 573-576. ISSN 0007-8506

Jiang, Xiang, Wang, Kaiwei and Martin, Haydn (2006) Near common-path optical fibre interferometer for potentially fast on-line micro/nano scale surface measurement. Optical Letters, 31. pp. 3603-3605. ISSN 0146-9592

Jiang, Xiang and Whitehouse, David J. (2012) Technological shifts in surface metrology. CIRP Annals - Manufacturing Technology, 61 (2). pp. 815-836. ISSN 0007-8506

Kim, S-W. and Walker, D.D. (2001) Measurement of Two-dimesional Distribution of Pure Axial Force in Active Polishing. Measurement Science and Technology, 12. pp. 1976-1982. ISSN 0957-0233

Kim, S.W., Walker, D.D. and Brooks, D. (2003) Active profiling and polishing for efficient control of material removal from large precision surfaces with moderate asphericity. Mechatronics, 13. pp. 295-312. ISSN 0957-4158

King, C.W., Davies, G., Mitchell, J., Mitchell, P., Rees, P. and Walker, D.D. (2014) Fusing data from multiple interferometers for the measurement of off-axis aspheres. Proceedings - ASPE/ASPEN Summer Topical Meeting: Manufacture and Metrology of Freeform and Off-Axis Aspheric Surfaces. pp. 28-33. ISSN 9781887706650

Koc, Erdem and Unver, Ertu (1998) Part Program Optimisation in CNC Turning Operation. Pamukkale University Journal of Engineering Sciences, 4 (1-2). pp. 655-661.

Kooli, Kaouther, Wright, Len Tiu and Wright, Adrian (2010) Business implications in the subcontracting alliance life cycle: case examples from the Tunisian clothing and textile industries. Journal of Business & Industrial Marketing, 25 (5). pp. 372-382. ISSN 0885-8624

Kus, Abdil, Unver, Ertu and Taylor, Andrew (2009) A comparative study of 3D scanning in engineering, product and transport design and fashion design education. Computer Applications in Engineering Education, 17 (3). pp. 263-271. ISSN 1061-3773

Lavrynenko, S.N., Nixon, G., Puttick, K.E. and Walker, D.D. (2002) Accidental and methodical defects of generation of precision and ultraprecision surfaces of polymer optics. Proceedings of SPIE - The International Society for Optical Engineering, 4411. pp. 102-105. ISSN 0277-786X

Lee, J.H., Bigelow, B.C., Walker, D.D., Doel, A.P. and Bingham, R.G. (2000) Why adaptive secondaries? Publications of the Astronomical Society of the Pacific, 112 (767). pp. 97-107. ISSN 0004-6280

Lee, J.H., Doel, A.P. and Walker, D.D. (2000) Adaptive secondary mirror demonstrator: construction and preliminary evaluation. Optical Engineering, 39 (4). ISSN 0091-3286

Li, H., Walker, D.D., Yu, G. and Zhang, W. (2013) Modeling and validation of polishing tool influence functions for manufacturing segments for an extremely large telescope. Applied Optics, 52 (23). pp. 5781-5787. ISSN 1559-128X

Li, H., Yu, G., Walker, D.D. and Evans, R. (2011) Modelling and measurement of polishing tool influence functions for edge control. Journal of the European Optical Society: Rapid Publications, 6 (ARTN 1). ISSN 1990-2573

Li, H., Zhang, W., Walker, D.D. and Yu, G. (2014) Active edge control in the precessions polishing process for manufacturing large mirror segments. Proceedings of SPIE: Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 9280. ISSN 1996-756X

Li, Rui F., Liu, Lande, Wang, Xue Z., Tweedie, Richard J., Primrose, Ken, Corbett, Jason and McNeil-Watson, Fraser K. (2009) Multivariate Statistical Control of Emulsion and Nanoparticle Slurry Processes Based on Process Tomography, Dynamic Light Scattering, and Acoustic Sensor Data. Computer Aided Chemical Engineering, 27. pp. 1317-1322. ISSN 1570-7946

Lim, Hye Won, Cassidy, Thomas and Cassidy, Tracy Diane (2017) Application Research of 3D Printing Technology on Dress Forms. International journal of Engineering & Technology, 9 (1). pp. 78-83. ISSN 1793-8236

Lindh, Jenny M., Goswami, Parikshit, Blackburn, Richard S., Arnold, Sarah E. J., Vale, Glyn A., Lehane, Michael J. and Torr, Steve J. (2012) Optimizing the Colour and Fabric of Targets for the Control of the Tsetse Fly 'Glossina Fuscipes Fuscipes'. PLoS Neglected Tropical Diseases, 6 (5). ISSN 1935-2735

Little, David, Porter, J.K., Peck, M. and Rollins, Ralph (2001) Responsive manufacturing demands alignment of production control methods to business drivers. Journal of Integrated Manufacturing Systems, 12 (3). pp. 170-178. ISSN 0957-6061

Liu, Lande (2009) Application of ultrasound spectroscopy for nanoparticle sizing in high concentration suspensions: A factor analysis on the effects of concentration and frequency. Chemical Engineering Science, 64 (23). pp. 5036-5042. ISSN 0009-2509

Liu, Lande (2015) Effects of aggregation on the kinetic properties of particles in fluidised bed granulation. Powder Technology, 271. pp. 278-291. ISSN 0032-5910

Liu, Lande, Akay, G. and Tong, L. (2011) Population balance modelling for a flow induced phase inversion based granulation in a two-dimensional rotating agglomerator. Chemical Engineering Research and Design, 89 (1). pp. 39-47. ISSN 0263-8762

Liu, Lande, Li, R.F., Collins, S., Wang, X.Z., Tweedie, R. and Primrose, K. (2011) Ultrasound spectroscopy and electrical resistance tomography for online characterisation of concentrated emulsions in crossflow membrane emulsifications. Powder Technology, 213 (1-3). pp. 123-131. ISSN 0032-5910

Liu, Qiang, Chen, Xun and Gindy, Nabil (2005) Fuzzy pattern recognition of AE signals for grinding burn. International Journal of Machine Tools and Manufacture, 45 (7-8). pp. 811-818. ISSN 08906955

Liu, Qiang, Chen, Xun and Gindy, Nabil (2006) Investigation of acoustic emission signals under a simulative environment of grinding burn. International Journal of Machine Tools and Manufacture, 46 (3-4). pp. 284-292. ISSN 08906955

Liu, X. and Gao, F. (2003) A novel multi-function tribological probe microscope for mapping surface properties. Measurement Science and Technology, 15 (1). pp. 91-102. ISSN 0957-0233

Liu, X.-W., Cheng, K., Longstaff, Andrew P., Widiyarto, H.M. and Ford, Derek G. (2004) Improved dynamic cutting force model in ball-end milling. Part I: theoretical modelling and experimental calibration. International Journal of Advanced Manufacturing Technology, 26 (5-6). pp. 457-465. ISSN 0268-3768

Liu, Xiaohong, Huang, Shujun, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2017) Full-field calibration of color camera chromatic aberration using absolute phase maps. Sensors, 17 (5). ISSN 1424-8220

Liu, Yue, Huang, Shujun, Zhang, Zonghua, Gao, Nan, Gao, Feng and Jiang, Xiang (2017) Full-field 3D shape measurement of discontinuous specular objects by direct phase measuring deflectometry. Scientific Reports, 7 (10293). ISSN 2045-2322

Lu, R.S. and Tian, Gui Yun (2006) On-line measurement of surface roughness by laser light scattering. Measurement Science and Technology, 17. pp. 1496-1502. ISSN 0957-0233

Lu, Wenlong, Jiang, Xiang, Liu, X.J. and Xu, Zhijie (2008) Compliance uncertainty of diameter characteristic in the next-generation geometrical product specifications and verification. Measurement Science and Technology, 19 (10). pp. 105103-1. ISSN 0957-0233

Lu, Wenlong, Zhang, Po, Liu, Xiaojun, Zhai, Wenzheng, Zhou, Mingzhuo, Luo, Jian, Zeng, Wenhan and Jiang, Xiang (2017) Influence of surface topography on torsional fretting wear under flat-on-flat contact. Tribology International, 109. pp. 367-372. ISSN 0301-679X

Lu, Y., Doel, A.P. and Walker, D.D. (2003) The Measurement of Small Displacements with a New Phase Shifting Method. SPIE - International Society for Optical Engineering. Proceedings, 42 (7). ISSN 0277-786X

Lu, Y., Doel, A.P., Walker, D.D. and Zhao, X. (2003) Dynamic measurement of displacement with a phase-shifting technique. Optical Engineering, 42. pp. 2006-2009. ISSN 0091-3286

Luo, Xichun, Tong, Zhen and Liang, Yingchun (2014) Investigation of the shape transferability of nanoscale multi-tip diamond tools in the diamond turning of nanostructures. Applied Surface Science, 321. pp. 495-502. ISSN 0169-4332

Ma, L.M., Jiang, Xiang, Xu, Z. and Li, Z. (2005) An investigation on the technical standard strategy for China's manufacturing industry. Journal of Physics: conference series, 13. pp. 389-393. ISSN 1742-6596

Mavromihales, Mike, Mason, J. and Weston, Bill (2003) A case of reverse engineering for the manufacture of wide chord fan blades (WCFB) used in Rolls Royce aero engines. Journal of Materials Processing Technology, 134 (3). pp. 279-286. ISSN 0924-0136

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2011) Efficient thermal error prediction in a machine tool using finite element analysis. Measurement Science and Technology, 22 (8). 085107. ISSN 0957-0233

Mills, A., Power, Jess, Bailey, Rowan and Walker, Martyn (2014) That which is not yet there. Journal of Writing in Creative Practice, 7 (3). pp. 517-531. ISSN 1753-5190

Mohammed, Arif, Folkes, Janet and Chen, Xun (2012) Detection of grinding temperatures using laser irradiation and acoustic emission sensing technique. Materials and Manufacturing Processes, 27 (4). pp. 395-400. ISSN 1042-6914

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2013) Accelerated surface measurement using wavelength scanning interferometer with compensation of environmental noise. Procedia Engineering: 12th CIRP Conference on Computer Aided Tolerancing, 10. pp. 70-76. ISSN 1877-7058

Muller, Matthias, Barrans, Simon and Blunt, Liam (2011) Predicting Plastic Deformation and Work Hardening during V-Band Formation. Journal of Materials Processing Technology, 211 (4). pp. 627-636. ISSN 0924-0136

Nabieva, I, Chazanova, M, Ergašev, K. and Pearson, J. S. (2004) Preparation for the dyeing of blended yarns made from cotton and PAN fibres. International Textile Bulletin, 50 (1). pp. 64-65. ISSN 1029-8525

O'Brien, Mark (2007) [Editorial]. Design Management Journal, 3 (1). ISSN 1557-0614

O'Dell, Stephen L., Citterio, O., Pareschi, Giovanni, Civitani, M. M., Arnold, J., Campana, S., Combrinck, H., Conconi, P., Cotroneo, V., Freeman, R., Mattaini, E., Morton, R., Motta, G., Pareschi, G., Parodi, G., Proserpio, L., Schuler, S., Simpson, P., Tagliaferri, G. and Walker, D.D. (2011) Progress on precise grinding and polishing of thin glass monolithic shell (towards WFXT). Proceedings of SPIE, 8147. p. 814714. ISSN 0277-786X

Olabode, OIaide Felix, Fletcher, Simon, Longstaff, Andrew P. and Mian, Naeem S. (2019) Precision Core Temperature Measurement of Metals Using an Ultrasonic Phase-Shift Method. Journal of Manufacturing and Materials Processing, 3 (3). pp. 1-12. ISSN 2504-4494

Pagani, Luca and Scott, Paul J. (2018) Curvature based sampling of curves and surfaces. Computer Aided Geometric Design, 59. pp. 32-48. ISSN 0167-8396

Pearson, J. S. and Mullen, E. (2003) Sunlight, skin cancer and children's clothing. Textiles Magazine, 30 (4). pp. 23-27. ISSN 1367-1308

Pearson, J. S., Shearer, A. J. and Squires, P. L. (2000) UK textile design education. Textiles Magazine, 29 (3). pp. 24-27. ISSN 1367-1308

Peggs, G., May-Miller, R., Walker, D.D., Atad-Ettedgui, E., Shore, P.R. and Smith, D.J. (2004) Dimensional metrology of mirror segments for extremely large telescopes. SPIE - International Society for Optical Engineering. Proceedings, 5382. pp. 224-228. ISSN 0277-786X

Peng, H.P., Jiang, Xiang, Xu, Zhijie and Liu, X.J. (2008) Optimal tolerance design for products with correlated characteristics by considering the present worth of quality loss. International Journal of Advanced Manufacturing Technology, 39 (1-2). pp. 1-8. ISSN 0268-3768

Pislaru, Crinela, Freeman, J.M. and Ford, Derek G. (2003) Modal parameter identification for CNC machine tools using wavelet transform. International Journal of Machine Tools and Manufacture, 43 (10). pp. 987-993. ISSN 0890-6955

Popov, O., Chornobuk, S. and Vishnyakov, Vladimir (2017) Structure formation of TiB2-TiC-B4C-C hetero-modulus ceramics via reaction hot pressing. International Journal of Refractory Metals and Hard Materials, 64. pp. 106-112. ISSN 0958-0611

Porter, J.K., Jarvis, Peter, Little, David, Laakman, J., Hannen, C. and Schotten, M. (1996) Production planning and control system developments in Germany. International Journal of Operations & Production Management, 16 (1). pp. 27-39. ISSN 0144-3577

Porter, Keith, Little, David, Peck, Matthew and Rollins, Ralph (1999) Manufacturing classifications: relationships with production control systems. Integrated manufacturing systems, 10 (4). pp. 189-199. ISSN 0957-6061

Power, Jess (2013) Fabric objective measurements for commercial 3D virtual garment simulation. International Journal of Clothing Science and Technology, 25 (6). ISSN 0955-6222

Power, Jess (2013) Fabric objective measurements for commercial 3D virtual garment simulation. International Journal of Clothing Science and Technology, 25 (6). pp. 423-439. ISSN 0955-6222

Power, Jess (2005) Are we equipped for wearables? Textile Asia, XXXVI (11). pp. 74-78. ISSN 0049-3554

Power, Jess (2010) Examination of issues affecting the teaching and learning of large cohorts within practical-based subjects. International Journal of Fashion Design, Technology and Education, 3 (2). pp. 55-66. ISSN 1754-3266

Power, Jess (2007) Functional to fashionable: knitwear's evolution throughout the last century and into the millennium. Journal of Textile and Apparel Technology and Management, 5 (4). pp. 1-16.

Power, Jess (2004) Knitting shells in the third dimension. Journal of Textile and Apparel Technology and Management, 3 (4). pp. 1-13.

Power, Jess (2008) Measuring up. Knitting International, 114 (1360). pp. 40-41. ISSN 0266-8394

Power, Jess (2008) Shaping progress. Knitting International, 114 (1358). pp. 34-35. ISSN 0266-8394

Power, Jess (2008) Size matters. Knitting International, 114 (1359). pp. 34-35. ISSN 0266-8394

Power, Jess (2012) Sustainable developments in knitting. International Journal of Business and Globalisation, 9 (1). pp. 1-11. ISSN 1753-3627

Power, Jess, Leaper, David J. and Harris, Joanne (2017) Designing functional medical products for children with cancer. International Journal of Fashion Design, Technology and Education. ISSN 1754-3266

Prendergast, G.P. and Marr, Norman E. (1997) Generic products: who buys them and how do they perform relative to each other? European journal of marketing, 31 (2). pp. 94-109. ISSN 0309-0566

Qi, Qunfen, Jiang, Xiangqian, Liu, Xiaojun and Scott, Paul J. (2010) An unambiguous expression method of the surface texture. Measurement, 43 (10). pp. 1398-1403. ISSN 0263-2241

Ren, Hongyu, Gao, Feng and Jiang, Xiangqian (2015) Improvement of high-order least-squares integration method for stereo deflectometry. Applied Optics, 54 (34). pp. 10249-10255. ISSN 0003-6935

Ren, Hongyu, Gao, Feng and Jiang, Xiangqian (2015) Iterative optimization calibration method for stereo deflectometry. Optics Express, 23 (17). pp. 22060-22068. ISSN 1094-4087

Rollins, Ralph (2003) Modelling the changing apparel supply chain. International Journal of Clothing Science and Technology, 15 (2). pp. 140-156. ISSN 0955-6222

Rollins, Ralph, Little, David and Porter, J.K. (2003) Modelling the changing apparel supply chain. International Journal of Clothing Science and Technology, 15 (2). pp. 140-156. ISSN 0955-6222

Rozelot, J.P., Bingham, R. and Walker, D.D. (1994) Lightweight Telescopes for Lunar Observatories. Advances in Space Research, 14 (6). pp. 129-135. ISSN 0273-1177

Sadriddinov, B., Khamraev, N., Ergašev, K. and Pearson, J. S. (2003) Dyeing of fabrics made of cotton/acrylic fiber blends with reactive dyes. Melliand International, 9 (4). pp. 336-337. ISSN 0947-9163

Sageman-Furnas, Andrew O., Goswami, Parikshit, Menon, Govind and Russell, Stephen J. (2014) The Sphereprint: An Approach to Quantifying the Conformability of Flexible Materials. Textile Research Journal, 84 (8). pp. 793-807. ISSN 0040-5175

Salihu, George, Goswami, Parikshit and Russell, Stephen J. (2012) Hybrid Electrospun Nonwovens from Chitosan/Cellulose Acetate. Cellulose, 19 (3). pp. 739-749. ISSN 0969-0239

Sinha, Pammi, Muthu, Subramanian Senthilkannan, Taylor, Iain, Schulz, Rita, Beverley, Katharine J., Day, Claire L. and Tipi, Nicoleta S. (2015) Systems thinking in designing automotive textiles. Textiles and Clothing Sustainability, 1 (1). ISSN 2197-9936

Song, C., Walker, D.D. and Yu, G. (2011) Misfit of rigid tools and interferometer subapertures on off-axis aspheric mirror segments. Optical Engineering, 50 (7). ISSN 0091-3286

Su, Z., Tian, Gui Yun and Gao, C. (2006) A machine vision system for on-line removal of contaminants in wool. Mechatronics, 16 (5). pp. 243-247. ISSN 0957-4158

Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2012) Five-Axis Machine Tool Condition Monitoring Using dSPACE Real-Time System. Journal of Physics: Conference Series, 364. 012091. ISSN 1742-6596

Tabriz, Md Shams E. and Barrans, Simon (2018) Effect of cusp size, depth and direction on stress concentration. International Journal of Materials, Mechanics and Manufacturing, 6 (2). pp. 88-93. ISSN 1793-8198

Tahera, Khadija, Earl, Chris F. and Eckert, Claudia (2017) A method for improving overlapping of testing and design. IEEE Transactions on Engineering Management, 64 (2). pp. 179-192. ISSN 0018-9391

Tang, Dawei, Gao, Feng and Jiang, Xiangqian (2014) On-line surface inspection using cylindrical lens-based spectral domain low-coherence interferometry. Applied Optics, 53 (24). pp. 5510-5516. ISSN 1559-128X

Tausif, Muhammad, Pliakas, Achilles, O'Haire, Tom, Goswami, Parikshit and Russell, Stephen J. (2017) Mechanical Properties of Nonwoven Reinforced Thermoplastic Polyurethane Composites. Materials, 10 (6). ISSN 1996-1944

Tezel, Algan, Koskela, Lauri and Tzortzopoulos, Patricia (2016) Visual Management in production management: a literature synthesis. Journal of Manufacturing Technology Management, 27 (6). pp. 766-799. ISSN 1741-038X

Thornton, Sabrina, Henneberg, Stephan C. and Naudé, Peter (2013) Understanding types of organizational networking behaviors in the UK manufacturing sector. Industrial Marketing Management, 42 (7). pp. 1154-1166. ISSN 00198501

Tian, G.Y., Sophian, Ali, Taylor, D. and Rudlin, J. (2004) Pulsed eddy current system for dynamic inspection of defects. Insight, 46 (5). pp. 256-259. ISSN 1354-2575

Tian, Gui Yun, Yin, G.F. and Taylor, D. (2002) Internet-based manufacturing: A review and a new infrastructure for distributed intelligent manufacturing. Journal of Intelligent Manufacturing, 13 (5). pp. 323-338. ISSN 0956-5515

Tipi, Nicoleta S. and Bennett, S (1999) Dispatching rules for scheduling and feedback control in a virtual enterprise - a simulation. International Journal of Flexible Automation and Integrated Manufacturing, 7 (3-4). pp. 293-304. ISSN 1064-6345

To, Suet, Zhu, Zhiwei and Zeng, Wenhan (2015) Novel end-fly-cutting-servo system for deterministic generation of hierarchical micro–nanostructures. CIRP Annals - Manufacturing Technology, 64 (1). pp. 133-136. ISSN 0007-8506

Tong, Zhen, Liang, Yingchun, Jiang, Xiang and Luo, Xichun (2014) An atomistic investigation on the mechanism of machining nanostructures when using single tip and multi-tip diamond tools. Applied Surface Science, 290. pp. 458-465. ISSN 0169-4332

Tong, Zhen, Luo, Xichun, Sun, Jining, Liang, Yingchun and Jiang, Xiangqian (2015) Investigation of a scale-up manufacturing approach for nanostructures by using a nanoscale multi-tip diamond tool. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Tonnellier, X., Morantz, P., Shore, P., Baldwin, A., Evans, R. and Walker, D.D. (2007) Subsurface damage in precision ground ULE (R) and Zerodur (R) surfaces. Optics Express, 15 (19). pp. 12197-12205. ISSN 1094-4087

Tonnellier, X., Shore, P., Luo, X., Morantz, P., Baldwin, A., Evans, R. and Walker, D.D. (2006) Wheel Wear and Surface/Subsurface Qualities when Precision Grinding Optical Materials. SPIE - International Society for Optical Engineering. Proceedings, 6273. pp. 8-16. ISSN 0277-786X

Walker, D.D., Beaucamp, A., Evans, R., Fox-Leonard, T., Fairhurst, N., Gray, C., Hamidi, S., Li, H., Messalink, W., Mitchell, J., Rees, P. and Yu, G. (2012) Edge-control and surface-smoothness in sub-aperture polishing of mirror segments. Proceedings of SPIE - The International Society for Optical Engineering, 8450. ISSN 0277-786X

Walker, D.D. (2006) £1m Zeeko Machine will Help OpTIC Polish up the Opto-electronics Sector. Welsh Optoelectronics Forum Newsletter.

Walker, D.D. (2008) Announcement of 5M Euro contract to produce seven prototype mirror segments for the European Extremely Large Telescope. Welsh Optoelectronics Newsletter.

Walker, D.D. (2005) OpTIC Hosts New National Centre for Ultra Precision Surfaces. Welsh Optoelectronics Forum Newsletter.

Walker, D.D. (2010) The large optics opportunity in the UK - an update. Public Service Review: Devolved Government (20). pp. 12-13. ISSN 1470-5257

Walker, D.D., Atkins, C., Baker, I., Evans, R., Hamidi, S., Harris, P., Li, H., Messelink, W., Mitchell, J., Parry-Jones, M., Rees, P. and Yu, G. (2011) Technologies for producing segments for Extremely Large Telescopes. Proceedings of SPIE, 8126. ISSN 0277-786X

Walker, D.D., Beaucamp, A., Bibby, M., Fox-Leonard, T., Gray, C., King, C., Rees, P. and Yu, G. (2014) Interactions between manufacture and measurement of off-axis aspheres. Proceedings - ASPE/ASPEN Summer Topical Meeting: Manufacture and Metrology of Freeform and Off-Axis Aspheric Surfaces. pp. 72-77. ISSN 9781887706650

Walker, D.D., Beaucamp, A., Dunn, C., Evans, R., Freeman, R., Morton, R., Wei, X. and Yu, G. (2008) Active Control of Edges and Global Microstructure on Segmented Mirrors. SPIE - International Society for Optical Engineering. Proceedings. ISSN 0277-786X

Walker, D.D., Beaucamp, A., Yu, G. and Li, H. (2010) Edge-control on mirror segments. Optics InfoBase Conference Papers. ISSN 2162-2701

Walker, D.D., Beaucamp, A.T., Brooks, D., Doubrovski, V., Cassie, M.D., Dunn, C., Freeman, R.R., King, A., Libert, M., McCavana, G., Morton, R., Riley, D. and Simms, J. (2004) New results from the Precessions polishing process scaled to larger sizes. SPIE - International Society for Optical Engineering. Proceedings, 5494. pp. 71-80. ISSN 0277-786X

Walker, D.D., Beaucamp, A.T.H., Doubrovski, V., Dunn, C., Freeman, R., Hobbs, G., McCavana, G., Morton, R., Riley, D., Simms, J. and Wei, X. (2005) New Developments in the Precessions process for Manufacturing Freeform, Large-optical, and Precision-mechanical Surfaces. SPIE - International Society for Optical Engineering. Proceedings, 6148. p. 614805. ISSN 0277-786X

Walker, D.D., Beaucamp, A.T.H., Doubrovski, V., Dunn, C., Freeman, R., Hobbs, G., McCavana, G., Morton, R., Riley, D., Simms, J. and Wei, X. (2006) New developments in the Precessions process for manufacturing free-form, large-optical, and precision-mechanical surfaces. SPIE - International Society for Optical Engineering. Proceedings. ISSN 0277-786X

Walker, D.D., Beaucamp, A.T.H., Doubrovski, V., Dunn, C., Freeman, R., Hobbs, G., McCavana, G., Morton, R., Riley, D., Simms, J. and Wei, X. (2005) Recent advances in the control of form and texture on free-form surfaces (invited paper). SPIE - International Society for Optical Engineering. Proceedings, 5965. ISSN 0277-786X

Walker, D.D., Beaucamp, A.T.H., Doubrovski, V., Dunn, C., Freeman, R., McCavana, G., Morton, R., Riley, D., Simms, J. and Wei, X. (2005) New results extending the Precessions process to smoothing ground aspheres and producing freeform parts. SPIE - International Society for Optical Engineering. Proceedings, 5869. pp. 79-87. ISSN 0277-786X

Walker, D.D., Brooks, D., King, A., Freeman, R., Morton, R., McCavana, G. and Sug-Whan, K. (2003) The precessions tooling for polishing and figuring flat,spherical and aspheric surfaces. Optics Express, 11 (8). pp. 958-964. ISSN 1094-4087

Walker, D.D., Citterio, O., Civitani, M.M., Arnold, J., Campana, S., Combrinck, H., Conconi, P., Cotroneo, V., Freeman, R., Mattaini, E., Morton, R., Motta, G., Pareschi, G., Parodi, G., Proserpio, L., Schuler, S., Simpson, C. and Tagliaferri, G. (2011) Progress on precise grinding and polishing of thin glass monolithic shell (towards WFXT). Proceedings of Optical Manufacturing and Testing IX conference.

Walker, D.D. and D'Arrigo, P. (1996) On the Stability of Cassegrain Spectrographs'. Monthly Notices of the Royal Astronomical Society, 281. pp. 673-678. ISSN 0035-8711

Walker, D.D. and Diego, F. (1985) Design Philosophy of the forthcoming echelle spectrographs for the AAT and LPO. Monthly Notices of the Royal Astronomical Society, 217. pp. 355-365. ISSN 0035-8711

Walker, D.D., Freeman, R., Morton, R., McCavana, G. and Beaucamp, A. (2006) Use of the 'Precessions'(TM) process for prepolishing and correcting 2D & 2 1/2 D form. Optics Express, 14 (24). pp. 11787-11795. ISSN 1094-4087

Walker, D.D., Freeman, R., Morton, R., McCavana, G. and Beaucamp, A. (2006) Use of the ‘Precessions’™ process for prepolishing and correcting 2D & 2½D form. Optics Express, 14 (24). pp. 11787-11795. ISSN 1094-4087

Walker, D.D., Sandford, P., Lyons, A., Fordham, J., Bone, D., Walker, A. and Boksenberg, A. (1985) The UCL Charge-Coupled Device Camera at the South African Astronomical Observatory. Advances in Electronics and Electron Physics, 64 A. pp. 185-192. ISSN 0065-2539

Walker, D.D., Yu, G., Li, H., Messelink, W., Evans, R. and Beaucamp, A. (2012) Edges in CNC polishing: from mirror-segments towards semiconductors, paper 1: edges on processing the global surface. Optics Express, 20 (18). pp. 19787-19798. ISSN 1094-4087

Walker, David D., Yu, Guoyu, Li, Hongyu, Reynolds, Christina and Bibby, Matt (2016) Closing the Metrology – Process Loop in CNC Polishing. SPIE - International Society for Optical Engineering. Proceedings, 10009. ISSN 0277-786X

Wang, M.Y., Horrocks, A. R., Horrocks, S., Hall, M. E., Pearson, J. S. and Clegg, S. (2000) Flame Retardant Textile Back-Coatings. Part 1: Antimony-Halogen System Interactions and the Effect of Replacement by Phosphorus-Containing Agents. Journal of Fire Sciences, 18 (4). pp. 265-294. ISSN 07349041

Wang, Xue Z., Liu, Lande, Li, Rui F., Tweedie, Richard J., Primrose, Ken, Corbett, Jason and McNeil-Watson, Fraser K. (2009) Online characterisation of nanoparticle suspensions using dynamic light scattering, ultrasound spectroscopy and process tomography. Chemical Engineering Research and Design, 87 (6). pp. 874-884. ISSN 0263-8762

Wang, Xue Z., Liu, Lande, Li, Ruifa, Tweedie, Richard J., Primrose, Ken, Corbett, Jason and McNeil-Watson, Fraser K. (2009) Online monitoring of nanoparticle suspensions using dynamic light scattering, ultrasound spectroscopy and process tomography. Computer Aided Chemical Engineering, 26. pp. 351-356. ISSN 1570-7946

Wigley, Stephen M., Nobbs, K and Larson, E (2013) Making the Marque: Tangible Branding in Fashion Retail and Product Design. Fashion Practice: The Journal of Design, Creative Process and the Fashion Industry, 5 (2). pp. 245-263. ISSN 1756-9370

Wojciechowski, S., Maruda, R.W., Barrans, Simon, Nieslony, P. and Krolczyk, G.M. (2017) Optimisation of machining parameters during ball end milling of hardened steel with various surface inclinations. Measurement, 111. pp. 18-28. ISSN 0263-2241

Xu, Qiang, Cunningham, J. and Ford, Derek G. (2003) The improvement of geometric accuracy of FMS machine through retrofitting and compensation. International Journal for Manufacturing Science and Production, 5 (1/2). pp. 67-72. ISSN 0793-6648

Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2007) Machining surface texture knowledge management using a category theory-based object-oriented database. Communications of SIWN (formerly: System and Information Sciences Notes), 1 (1). pp. 83-88. ISSN 1757-4439

Xu, Zhijie (2002) A novel virtual environment construction approach for manufacturing simulations. European Journal of Mechanical Engineering, Winter. pp. 203-208. ISSN 1371-6980

Yang, H., Kim, S. and Walker, D.D. (2004) A novel profilometer for nanometric form assessment for large machined surfaces. Key Engineering Materials, Advances in Abrasive Technology VI, 257. pp. 225-230. ISSN 1013-9826

Yang, H.S., Kim, S.W. and Walker, D.D. (2003) A novel laser datum series for nanometric profilometry for large optical surfaces. Optics Express, 11 (6). pp. 624-631. ISSN 1094-4087

Yang, H.S. and Walker, D.D. (2002) Progress on development of prototype laser reference system for stylus profilometry of large optics. Proceedings of SPIE, 4411. pp. 161-170. ISSN 0277-786X

Yang, Li, Wang, Zhiguo, Liang, Yingchun, Chen, Mingjun, Tong, Zhen, Chen, Jiaxuan, Namba, Yoshiharu, Walker, David D. and Li, Shengyi (2010) Analysis about diamond tool wear in nano-metric cutting of single crystal silicon using molecular dynamics method. Proceedings of SPIE, 7655. 76550O-76550O. ISSN 0277-786X

Yeung, Ka Yiu and Chen, Xun (2010) 3-D Fixture Layout Design System Based on Genetic Algorithm. Proceedings of the 16th International conference on Automation & Computing. pp. 238-243. ISSN 9780955529368

Yin, G.F., Tian, Gui Yun and Taylor, D. (2002) A web-based remote cooperative design for spatial cam mechanisms. International Journal of Advanced Manufacturing Technology, 20 (8). pp. 557-563. ISSN 0268-3768

Yu, G., Li, H. and Walker, D.D. (2011) Removal of Mid Spatial-Frequency Features in Mirror Segments. Journal of the European Optical Society: Rapid Publications, 6 (ARTN 1). ISSN 1990-2573

Yu, G., Walker, D.D. and Li, H. (2012) Implementing a grolishing process in Zeeko IRP machines. Applied Optics, 51 (27). pp. 6637-6640. ISSN 1559-128X

Yu, G., Walker, D.D. and Li, H. (2012) Research on fabrication of mirror segments for E-ELT. Proceedings of SPIE, 8416. ISSN 0277-786X

Yusuf, Yahaya Y. and Little, David (1998) An empirical investigation of enterprise-wide integration of MRPII. International Journal of Operations & Production Management, 18 (1). pp. 66-86. ISSN 0144-3577

Yusuf, Yahaya Y., Little, David and Onuh, O. (2002) Multiple case studies of total enterprise integration programmes: lessons and benefits. International Journal of Manufacturing Technology and Management, 4 (3/4). pp. 283-302. ISSN 1368-2148

Zeng, Shengye, Blunt, Liam and Jiang, Xiang (2011) The application of Taguchi approach to optimise the processing conditions on bonnet polishing of CoCr. Key Engineering Materials, 496. pp. 235-240. ISSN 1013-9826

Zeng, Shengye, Blunt, Liam and Racasan, Radu (2013) An investigation of the viability of bonnet polishing as a possible method to manufacture hip prostheses with multi-radius femoral heads. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Zeng, Wenhan, Jiang, Xiang and Blunt, Liam (2009) Surface Characterisation Based Tool Wear Monitoring in Peripheral milling. International Journal of Advanced Manufacturing Technology, 40 (3). pp. 226-233. ISSN 0268-3768

Zhang, Po, Lu, Wenlong, Liu, Xiaojun, Zhou, Mingzhuo, Zhai, Wenzheng, Zhang, Gengpei, Zeng, Wenhan and Jiang, Xiangqian (2017) Torsional fretting wear behavior of CuNiAl against 42CrMo4 under flat on flat contact. Wear, 380-38. pp. 6-14. ISSN 0043-1648

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

Zhao, Ping, Gao, Nan, Zhang, Zonghua, Gao, F. and Jiang, Xiang (2018) Performance analysis and evaluation of direct phase measuring deflectometry. Optics and lasers in engineering, 103. pp. 24-33. ISSN 0143-8166

Book Chapter

Abdulshahed, Ali, Longstaff, Andrew P and Fletcher, Simon (2014) A novel approach for ANFIS modelling based on Grey system theory for thermal error compensation. In: 14th UK Workshop on Computational Intelligence. UKCI (2014). IEEE, Bradford, :UK. ISBN 978-1-4799-5538-1

Abdulshahed, Ali, Longstaff, Andrew P. and Fletcher, Simon (2015) A particle swarm optimisation-based Grey prediction model for thermal error compensation on CNC machine tools. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. Euspen, Huddersfield, UK, pp. 369-378. ISBN 978-0-9566790-5-5

Abdulshahed, Ali, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Application of GNNMCI(1, N) to environmental thermal error modelling of CNC machine tools. In: The 3rd International Conference on Advanced Manufacturing Engineering and Technologies. KTH Royal Institute of Technology, Stockholm, Sweden, pp. 253-262. ISBN 9789175018928

Abdulshahed, Ali, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Comparative study of ANN and ANFIS prediction models for thermal error compensation on CNC machine tools. In: Laser Metrology and Machine Performance X. LAMDAMAP 2013 . EUSPEN, Buckinghamshire, UK, pp. 79-89. ISBN 978-0-9566790-1-7

Abusaad, Samieh, Benghozzi, Ahmed, Gu, Fengshou and Ball, Andrew (2013) Utilizing Data from a Sensorless AC Variable Speed Drive for Detecting Mechanical Misalignments. In: Damage Assessment of Structures. DAMAS 2013, X . Trans Tech Publications Ltd., Dublin, Ireland, pp. 465-472. ISBN 978-3-03785-796-0

Abusaad, Samieh, Benghozzi, Ahmed, Brethee, Khaldoon F., Gu, Fengshou and Ball, Andrew (2014) Investigating the Effect of Water Contamination on Gearbox Lubrication based on Motor Control Data from a Sensorless Drive. In: Proceedings of the 3rd international workshop and congress on eMaintenance: June 17-18 Luleå, Sweden : eMaintenance, Trends in technologies & methodologies, challenges, possibilites and applications. Luleå tekniska universite, Luleå, pp. 61-67. ISBN 978-91-7439-972-1

Abusaad, Samieh, Benghozzi, Ahmed, Smith, Ann, Gu, Fengshou and Ball, Andrew (2015) The Detection of Shaft Misalignments using Motor Current Signals from a Sensorless Variable Speed Drive. In: Vibration Engineering and Technology of Machinery. Mechanisms and Machine Science (23). Springer, London, pp. 173-183. ISBN 978-3-319-09918-7

Akowua, Kwame D.B, Fletcher, Simon, Longstaff, Andrew P. and Mian, Naeem S. (2017) Areal surface measurement using multidirectional laser line scanning. In: Laser Metrology and Machine Performance XII, Lamdamap 2017. euspen, Renishaw Innovation Centre, Wotton-under-Edge, UK, pp. 175-182. ISBN 978-0956679093

Alzarok, Hamza, Fletcher, Simon and Longstaff, Andrew P. (2016) A new strategy for improving vision based tracking accuracy based on utilization of camera calibration information. In: The 22nd IEEE International Conference on Automation & Computing. ICAC (2016). IEEE, University of Essex, Colchester, UK, pp. 290-295. ISBN 978-1-8621813-1-1

Alzarok, Hamza, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2015) Investigation of a new method for improving image resolution for camera tracking applications. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 40-50. ISBN 978-0-9566790-5-5

Bagdasar, Ovidiu, Birlutiu, Adriana, Chen, Minsi and Popa, Ioan-Lucian (2017) Qualitative Case Study Methodology: Automatic Design and Correction of Ceramic Colors. In: Proceedings of the 21st International Conference on System Theory, Control and Computing (ICSTCC 2017). IEEE. ISBN 9781538638422

Barrans, Simon and Bhat, N. (2003) Design of flat bed aerostatic bearings with the aid of finite element analysis. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 361-370. ISBN 9781853129902

Barrans, Simon, Ghurbal, E.M. and Freeman, R. (2003) Design optimization of the head of a high precision polishing machine. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 325-334. ISBN 9781853129902

Bashir, Abid and Denton, Paul (2010) The Identification of Enterprise System Limitations within Manufacturing Supply Chains. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 110-115. ISBN 9781862180932

Blunt, Liam, Elrawemi, Mohamed, Fleming, Leigh, Martin, Haydn, Muhamedsalih, Hussam and Robbins, David (2013) Development of the basis for in process metrology for roll to roll production of flexible photovoltaics. In: Proceedings of the 11th IMEKO TC14 Symposium on Laser Metrology for Precision Measurement and Inspection in Industry. International Measurement Confederation (IMEKO), Gdansk, Poland, pp. 363-366. ISBN 978-1-63266-817-2

Blunt, Liam, Elrawemi, Mohamed, Fleming, Leigh, Robbins, David and Muhamedsalih, Hussam (2014) In-line metrology for defect assessment on large area Roll 2 Roll substrates. In: 11th IMEKO TC14 Symposium on Laser Metrology for Precision Measurement and Inspection in Industry (LMPMI 2014). Curran Associates, pp. 1-6. ISBN 9781632667311

Blunt, Liam, Fleming, Leigh, Elrawemi, Mohamed, Robbins, David and Muhamedsalih, Hussam (2013) In-line metrology of functional surfaces with a focus on defect assessment on large area Roll to Roll substrates. In: Proceedings of the 13th international conference of the european society for precision engineering and nanotechnology. EUSPEN, Germany, Berlin, pp. 71-74. ISBN 13:978-0-9566790-2-4

Blunt, Liam, Muhamedsalih, Hussam and Elrawemi, Mohamed (2015) Implementation of wavelength scanning interferometry for R2R flexible PV barrier films. In: EUSPEN 15th International Conference & Exhibition. EUSPEN, Leuven, Belgium. ISBN 978-0-9566790-7-9

Cunningham, J., Xu, Qiang and Ford, Derek G. (2002) A case study on practical error correction practices utilised on a CNC machine tool. In: Advances in Manufacturing Technology XVI. Wiley, pp. 361-366. ISBN 9781860583780

Denton, Paul and Hodgson, A. (1999) Can SMEs Afford MRP? In: ICPR-15 Manufacturing for a global market. Dept. of Manufacturing and Operations Engineering, University of Limerick, Limerick, Ireland, pp. 735-738. ISBN 9781874653561

Denton, Paul, Hodgson, A. and Hreczuk-Hirst, I. A. (1999) Implementing Intranet Support for BPR in a Small Manufacturing Company. In: ICPR-15 Manufacturing for a global market. Dept. of Manufacturing and Operations Engineering, University of Limerick, Limerick, Ireland, pp. 739-742. ISBN 9781874653561

Edwards, N. W. M. and Goswami, Parikshit (2017) Plasma-Based Treatments of Textiles for Water Repellency. In: Waterproof and Water Repellent Textiles and Clothing. The Textile Institute Book Series . Elsevier, pp. 215-232. ISBN 9780081012123

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh, Sweeney, Francis and Robbins, David (2014) Defect Detection in Thin-film Photovoltaics; Towards Improved Efficiency and Longevity. In: 5th International Renewable Energy Congress. IREC 2014 . IEEE, Hammamet, Tunisia, pp. 524-528. ISBN 978-1-4799-2196-6

Elrawemi, Mohamed, Blunt, Liam and Fleming, Leigh (2014) Metrology and Characterisation of Defects on Barrier Layers for Thin Film Flexible Photovoltaics. In: Proceedings of EUSPEN 14th International Conference 2014. EUSPEN, Dubrovnik, Croatia, pp. 165-168. ISBN 978-0-9566790-3-1

Elrawemi, Mohamed, Blunt, Liam and Fleming, Leigh (2013) Process Practice and its Effects on Surface Defects on Flexible PV Barrier Films. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 49-54. ISBN 9781862181212

Fleming, Leigh, Blunt, Liam, Robbins, David and Elrawemi, Mohamed (2013) Characterisation techniques to assess functional properties of barrier coatings for flexible PV substrates. In: Proceedings of Laser Metrology and Performance X 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. LAMDAMAP 2013 . EUSPEN, Buckinghamshire, UK, pp. 59-69. ISBN 978-0-9566790-1-7

Fletcher, Simon and Ford, Derek G. (2003) Measuring and modelling heat transfer and thermal errors on a ballscrew feed drive system. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 349-360. ISBN 9781853129902

Gao, Feng (2017) Interferometry for Online/In-Process Surface Inspection. In: Optical Interferometry. InTech, Rijeka, Croatia, pp. 41-60. ISBN 978-953-51-2955-4

Gao, Feng (2017) Interferometry for Online/In-Process Surface Inspection. In: Optical Interferometry. InTech. ISBN 978-953-51-2955-4

Gao, F., Wang, Kaiwei and Jiang, Xiang (2009) A high speed scanning heterodyne interferometer for in process surface measurement. In: Proceedings of the euspen International Conference – San Sebastian - June 2009. European Society for Precision Engineering & Nanotechnology, San Sebastian, Spain. ISBN 13:978-0-9553082-6-0

Gill, Harry and Unver, Ertu (2000) Innovation, design and CAE in new product development. In: Integrating design education beyond 2000: proceedings of the 22nd SEED Annual Design Conference and 7th National Conference on Product Design Education, 6-7 September 2000, University of Sussex, Brighton, UK. John Wiley and Sons Ltd, Brighton, UK. ISBN 9781860582653

Goswami, Parikshit (2014) Finish, Textile. In: Encyclopedia of Color Science and Technology. Springer. ISBN 9783642278518

Goswami, Parikshit and Basak, Montu (2014) Sulfur Dyes. In: Kirk-Othmer Encyclopedia of Chemical Technology. Wiley. ISBN 9780471238966

Goswami, Parikshit and O'Haire, Tom (2016) Developments in the Use of Green (Biodegradable), Recycled and Biopolymer Materials in Technical Nonwovens. In: Advances in Technical Nonwovens. Woodhead Publishing Series in Textiles (181). Elsevier, pp. 97-114. ISBN 9780081005750

Hajjaji, Mufeed and Denton, Paul (2011) The Integration of Risk Management into Maintenance Project Approaches for SMEs. In: Proceedings of 21st International Conference on Production Research ICPR21 July 31 - August 4, 2011. ICPR, Stuttgart, Germany. ISBN 978-3-8396-0293-5

Hajjaji, Mufeed, Denton, Paul and Jackson, Steve (2010) The effectiveness of using project management tools and techniques for delivering projects. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 124-129. ISBN 9781862180932

Hands, D. and O'Brien, Mark (2004) Asia - Link: Sino European Design Management Curriculum Development. In: International Engineering and Product Design Education Conference Proceedings: the 2nd International Engineering and Product Design Education Conference, Delft, The Netherlands , 2-3 September 2004. NVIO. ISBN 90-5155-020-0

Hardaker, Glenn and Ahmed, Pervaiz K. (1998) International approaches to computer-integrated manufacturing: perspectives from Europe, America and Japan. In: The strategy and organization of international business. The academy of international business series . St. Martin's Press, New York, pp. 177-194. ISBN 0333674693

Jiang, Xiang, Gao, F. and Mateboer, A. (2010) An approach of assessment for ultra-precision V-groove structured surfaces. In: Proceedings of the euspen International Conference – Delft - June 2010. European Society for Precision Engineering & Nanotechnology, Delft, Netherlands.

Kuma-Kpobee, Mercy, Power, Jess and Otieno, R. (2007) Utilisation of Traditional Dress: The Case of the Slit and Kaba in Ghana. In: Proceedings of ARS Textrina: International Textiles Conference. Textile Territories: Past, Present and Future . University of Leeds, Ulster, Belfast,Northern Ireland, pp. 83-87.

Kus, Abdil, Unver, Ertu, Jagger, Brian and Durgun, Ismail (2013) A Study of Injection Moulding with Bismuth Alloy. In: Green Design, Materials and Manufacturing Processes. Taylor & Francis, pp. 225-232. ISBN 9781138000469

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Integrated Tactile-Optical Coordinate System for the Reverse Engineering of Complex Geometry. In: Proceedings of the 37th International MATADOR Conference. Springer, pp. 41-44. ISBN 9781447144793

Little, David and McKinna, A. (2005) A lean manufacturing assessment tool for use in SMEs. In: Proceedings of the Seventh SMESME International Conference : Stimulating Manufacturing Excellence in Small & Medium Enterprises: 12-15 June 2005 University of Strathclyde, Glasgow, UK. University of Strathclyde, Scottish School of Further Education. ISBN 0947649379

Liu, X., Bell, T., Gao, F. and Chetwynd, D. G. (2002) Characterisation of engineered surfaces by a multi-function tribological probe microscope. In: EUSPEN International Conference 2002. EUSPEN, pp. 719-722.

Maatgi, Musbah and Denton, Paul (2011) Understanding the Determinants of SME ISO 9000 Success: Towards a Classification of Work Environment. In: Proceedings of 21st International Conference on Production Research ICPR21 July 31 - August 4, 2011. ICPR, Stuttgart, Germany. ISBN 978-3-8396-0293-5

Maatgi, Musbah and Denton, Paul (2013) The successful implementation of ISO9000 through work environment analysis : a UK case study perspective. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 67-72. ISBN 9781862181212

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) The significance of air pockets for modelling thermal errors of machine tools. In: Laser Metrology and Machine Performance X. Lamdamap 2013 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, 10 . EUSPEN, Bedfordshire, UK, pp. 189-198. ISBN 978-0-9566790-1-7

Miller, Martin, Hall, David and Little, David (2005) Pathways to success in SMEs. In: Proceedings of the Seventh SMESME International Conference on Stimulating Manufacturing Excellence in Small & Medium Enterprises. Centre for Strategic Manufacturing Design, Manufacture & Engineering Management, University of Strathclyde, Glasgow, pp. 208-215. ISBN 0 947649 37 9

Moschetti, Giuseppe, Muhamedsalih, Hussam, Connor, Daniel, Jiang, Xiang and Leach, Richard K. (2015) Vertical axis non-linearities in wavelength scanning interferometry. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 31-39. ISBN 978-0-9566790-5-5

Muhamedsalih, Hussam, Blunt, Liam, Martin, Haydn, Hamersma, Ivo, Elrawemi, Mohamed and Feng, Gao (2015) An integrated opto-mechanical measurement system for in-process defect measurement on a roll-to-roll process. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 99-107. ISBN 978-0-9566790-5-5

Muhamedsalih, Hussam, Blunt, Liam, Martin, Haydn, Jiang, Xiang and Elrawemi, Mohamed (2014) An interferometric auto-focusing method for on-line defect assessment on a roll-to-roll process using wavelength scanning interferometry. In: Proceedings of EUSPEN 14th International Conference 2014. EUSPEN, Dubrovnik, Croatia, pp. 177-180. ISBN 978-0-9566790-3-1

Muhamedsalih, Hussam, Elrawemi, Mohamed, Blunt, Liam, Xiangqi, Lan and Martin, Haydn (2015) A computerised data handling procedure for defect detection and analysis for large area substrates manufactured by roll-to-roll process. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 84-91. ISBN 978-0-9566790-5-5

Needham, Paul M. (2006) Design for Six Sigma, its Potential Effect on Weight in Modern Military Aircraft. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

O'Brien, Mark (2005) Entente Cordiale: developing design alliances. In: Crossing Design Boundaries: Proceedings of the 3rd Engineering & Product Design Education International Conference, 15-16 September 2005, Edinburgh, UK. Routledge, pp. 207-212. ISBN 978-0-415-39118-4

Power, Jess (2017) Advanced knitting technologies for high-performance apparel. In: High Performance Apparel: Materials, Development, and Applications. The Textile Institute Book Series . Elsevier, London, UK, pp. 113-128. ISBN 9780081009048

Power, Jess (2010) Anthropometric Practices & the complete Garment. In: Proceedings of Textiles: A Global Vision: The Textile Institute Centenary Conference. The Textile Institute, Manchester, UK. ISBN 9780956641915

Power, Jess (2005) Are we equipped for wearables? In: Proceedings of the 84th Textile Institute World Conference. TIWC 2005 . The Textile Institute, Releigh, North Carolina, USA. ISBN 1870372670

Power, Jess (2008) Developments in apparel knitting technology. In: Advances in Apparel Production. Woodhead Publishing, London, UK. ISBN 978 1 84569 295 7

Power, Jess (2010) Devising a product development curriculum to promote industry ready apparel graduates. In: Proceedings of Textiles: A Global Vision: The Textile Institute Centenary Conference. The Textile Institute, Manchester, UK. ISBN 9780956641915

Power, Jess (2014) A New Methodology for the Integration of Performance Materials into the Clothing Curriculum. In: Proceedings of The 89th Textile Institute World Conference. TIWC 2014 . The Textile Institute, Wuhan, China, pp. 538-543. ISBN 9781510840782

Power, Jess (2007) Study of anthropometrical data in knitted garments. In: Proceedings of the 85th Textile Institute World Conference. The Complete Set of World Conference Proceedings . The Textile Institute, Colombo, Sri Lanka.

Power, Jess (2015) Yarn to fabric: knitting: Chapter 12. In: Textiles and Fashion: Materials, Design and Technology. Woodhead Publishing Series in Textiles, 1st Ed . Elsevier, London, UK, pp. 289-305. ISBN 9781845699314

Power, Jess (2007) An examination into textile education by active research. In: Proceedings of the 85th Textile Institute World Conference. The Complete Set of World Conference Proceedings . The Textile Institute, Colombo, Sri Lanka.

Power, Jess, Apeagyei, P.R. and Jefferson, A.M. (2011) Integrating 3D Scanning Data & Textile Parameters into Virtual Clothing. In: Proceedings of the 2nd International Conference on 3D Body Scanning Technologies. Hometrica Consulting, Lugano, Switzerland, pp. 213-224. ISBN 978-3-033-03134-0

Power, Jess and Dias, T. (2003) Knitting of electroconductive yarns. In: IEE Eurowearable '03. Conference Proceedings, 2003 . IEEE, pp. 55-60. ISBN 0-85296-282-7

Power, Jess, Dias, T. and Cooke, W.D. (2002) A study of flat-bed knitting technology for three-dimensional preforms. In: Conference Proceedings: World Congress: Knitting for the 21st Century. UMIST, UMIST Conference Centre, Manchester, UK, pp. 189-199.

Power, Jess and Oteino, R. (2008) Investigating the Relationship Between Anthropometrical Data and Fully Shaped Knitted Garments in UK Manufacturing. In: Proceedings of the 86th Textile Institute World Conference. The Textile Institute, Hong Kong, China. ISBN 1870372700

Ren, Hongyu, Jiang, Xiangqian, Gao, Feng and Zhang, Zonghua (2014) Absolute height measurement of specular surfaces with modified active fringe reflection photogrammetry. In: Interferometry XVII: Advanced Applications. Proceedings of SPIE, 9204 (9204). SPIE, San Diego, California, USA, 920408-1-920408-8. ISBN 9781628412314

Riddalls, C.E., Bennett, S and Tipi, Nicoleta S. (2000) The optimal control of production-inventory systems. In: 10th International conference on Flexible automation and intelligent manufacturing. Econo Printing, pp. 649-658. ISBN 9780970105301

Sinha, Pammi, Dissanayake, D., G., Kanchana, Mahwera, Danford and Kahabi, Charles (2010) Creating a global vision for sustainable fashion. In: 87th Textile Institute World Conference 2010. Textiles: A Global Vision - Textiles Institute Centenary World Conference, 1 . Textiles Institute, Manchester, UK, pp. 247-275. ISBN 978-1-61782-270-4

Tipi, Nicoleta S., Bennett, S and Riddalls, C.E. (2000) Feedback control techniques for a manufacturing system. In: 10th International conference on Flexible automation and intelligent manufacturing. Econo Printing, pp. 95-104. ISBN 9780970105301

Walker, D.D. (1993) Optical Instruments - Where We Go From Here. In: Optics in Astronomy. Cambridge University Press.

Walker, David D., Yu, G. and Li, H. (2011) Research in new polishing techniques for off-axis mirror segments. In: Proceedings of: The Twenty-sixth Annual Meeting of The American Society for Precision Engineering. ASPE, 52 (2011). American Society for Precision Engineering, Denver Marriott City Center Hotel Denver, Colorado, pp. 31-34. ISBN 9781887706582

Wilson, M. C. T. and Kubiak, K.J. (2016) Simulation of Drops on Surfaces. In: Fundamentals of Inkjet Printing: The Science of Inkjet and Droplets. John Wiley & Sons. ISBN 978-3-527-33785-9

Xu, Qiang, Cunningham, J. and Ford, Derek G. (2002) The improvement of geometric accuracy of FMS machine through retrofitting and compensation. In: Advances in Manufacturing Technology XVI: Proceedings of the Eighteenth National Conference on Manufacturing Research, Leeds Metropolitan University, UK, 10-12 September 2002. John Wiley and Sons, pp. 441-448. ISBN 9781860583780

Xu, Qiang and Ford, Derek G. (2002) Analytical and FE Identification of lowest natural frequency of a ball-screw drive in beaver machine. In: Advances in Manufacturing Technology XVI: Proceedings of the Eighteenth National Conference on Manufacturing Research, Leeds Metropolitan University, UK, 10-12 September 2002. John Wiley and Sons, pp. 247-251. ISBN 9781860583780

Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2007) Exploration of a Category Theory-Based Object-Oriented Database for Surface Texture Information Management. In: Proceedings of the First International Symposium on Data, Privacy, and E-Commerce November 1-3, 2007. IEEE Computer Society, London, UK, pp. 107-109. ISBN 978-0-7695-3016-1

Zeng, Wenhan, Jiang, Xiang, Scott, Paul J., Xiao, Shaojun and Blunt, Liam (2009) A Fast Algorithm for the High Order Linear and Nonlinear Gaussian Regression filter. In: Proceedings of the 9 th international conference of the european society for precision engineering and nanotechnology. euspen, San Sebastian, Spain, pp. 356-359. ISBN 978-0-9553082-6-0

Monograph

Denton, Paul (2012) Succeeding in Tomorrow’s Engineering World of Work: case study. Case Study. National HE STEM Programme, Birmingham.

Denton, Paul and Short, C. (2004) Rapid Product Development Evaluation Report. Project Report. Intelligent Manufacturing Systems Consortium.

Harris, Joanne and Smith, Gary (2014) 3M BIC Innovation Fund NovaGlaze Research and Technology Project. Technical Report. 3M Buckley Innovation Center, Huddersfield, UK. (Unpublished)

Johnson, Anthony and Unver, Ertu (2011) The Conceptual Design of a Kinetic Energy Storage Device to Store 20 KWh of Energy. Research Report. University of Huddersfield Confidential Feasibility Report, Huddersfield, UK. (Unpublished)

Li, T., Leach, Richard K., Jung, L, Jiang, Xiang and Blunt, Liam (2009) Comparison of Type F2 Software Measurement Standards for Surface Texture. Technical Report. National Physical Laboratory, UK, London, UK.

Walker, D.D., Doel, A.P., Bingham, R.G., Brooks, D., King, A.M, Peggs, G. and Hughes, B. (2002) Design Study Report-The Primary and Secondary Mirrors for the Proposed Euro50 Telescope. Project Report. Instituto de Astrofisica de Canarias. (Submitted)

Conference or Workshop Item

Abel, Ann-Kristen, Congdon, Amy, Chieza, Natsai, Lee, Jenny, Martinez, Laura, Ribul, Miriam and Rouillon, Marie (2014) Industry Pioneers. In: Industry Pioneers Conference, 19th November 2014, Nottingham, UK.

Abuaniza, Ayman, Fletcher, Simon, Mian, Naeem S. and Longstaff, Andrew P. (2015) Machine structure simulation using FEA and optimised thermal parameters. In: Laser Metrology and Machine Performance (LAMDAMAP) 2015, 17-18 March 2015, University of Huddersfield. (Unpublished)

Adesta, Erry Yulian Triblas, Kelly, P.F. and Little, David (2004) A reference model for extended enterprise. In: 3rd International Conference on Advanced Manufacturing Technology (ICAMT 2004), 11 - 13 May 2004, Pan Pacific Hotel, Kuala Lumpur. (Unpublished)

Adu-Boakye, S., Power, Jess, Wallace, T. and Chen, Z. (2012) Development of a Sizing System for Ghanaian Women For The Production Of Ready-To-Wear Clothing. In: The 88th Textile Institute World Conference 2012, 15th-17th May 2012, Selangor, Malaysia.

Allport, John, Unver, Ertu, Rezk, Ahmed and Khodabakhshi, Goodarz (2017) Graphene Enhanced Adsorption Desalination System. In: Materials Forum, July 6th, 2017, BLG10, University of Huddersfield. (Unpublished)

Atkinson, Paul and Dean, Lionel Theodore (2003) 'Future factories': teaching techné. In: 5th European Academy of Design Conference, April 2003, Universitat de Barcelona, Spain.

Barrans, Simon, Tabriz, Md Shams E and Ellis, Christian (2017) Determining stress in turbocharger impellers due to component machining. In: ASME Turbo Expo: Turbomachinery Technical Conference & Exposition, 26-30 June 2017, Charlotte, North Carolina, USA.

Blunt, Liam and Elrawemi, Mohamed (2015) Functional Modelling of Water Vapour Transmission through Surface Defects Using Surface Segmentation Analysis. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, 2nd-5th March 2015, University of North Carolina at Charlotte Charlotte, North Carolina, USA.

Blunt, Liam, Elrawemi, Mohamed, Fleming, Leigh, Martin, Haydn, Muhamedsalih, Hussam and Robbins, David (2013) Metrology for in process metrology for roll to roll production of flexible photovoltaics. In: Metrology Technologies to Enable Reel to Reel Processing of Emerging Products, November 20, 2013, National Physical Laboratory , Teddington, Middlesex, UK.. (Unpublished)

Blunt, Liam, Jiang, Xiang, Xiao, Shaojun and Scott, Paul J. (2004) The use of interferometry and image analysis techniques for metrology of MST devices. In: 8th International Symposium on Measurement and Quality Control in Production, 12th-15th October, 2004, Erlangen, Germany. (Unpublished)

Blunt, Liam, Robbins, David, Leach, Richard, Fleming, Leigh and Elrawemi, Mohamed (2012) Surface defects in water vapour barrier layers for structured plastic electronics. In: Tropical Meeting Structured & Freeform Surfaces, 5th-6th December 2012, National Physical Laboratory, Teddington, UK.

Bracken, C., O'Sulllvan, C., Donohoe, A., Murphy, A., Savini, G., Juanola-Parramon, R., Baccichet, N., Guisseau, A., Ade, P., Pascale, E., Spencer, L., Walker, I., Dohlen, K., Lightfoot, J., Holland, W., Jones, M., Walker, D.D. and McMillan, A. (2015) Optical and Quasi-Optical Analysis of System Components for a Far-Infrared Space Interferometer. In: UNSPECIFIED.

Chen, Xiaomei and Koenders, Ludger (2013) A novel pitch evaluation method based on a cross-correlation filter. In: Nanoscale 2013, 25-26, April 2013, Paris, France. (Unpublished)

Chen, Xun (2009) Fundamental Study of Corrective Abrasive Machining Technology. In: CIRP UK Meeting, 8th May 2009. (Unpublished)

Chen, Xun (2011) Precision abrasive machining technology. In: Precision Abrasive Machining Technology Seminar, 13 January 2011, Heriot-Watt University. (Unpublished)

Chen, Xun and Opoz, Tahsin Tecelli (2010) Simulation of Grinding Surface Creation – A Single Grit Approach. In: The 13th International Symposium on Advances in Abrasive Technology (ISAAT 2010), 19-22 September 2010, Taipei, Taiwan.

Conlon, Jo and Narayanaswamy, Srilakshmi (2017) A vision for the future using Product Lifecycle Management (PLM) as a platform for operational excellence and business transformation. In: The Circular Economy from a Fashion and Textiles Perspective, 15th June 2017, University of Huddersfield, UK. (Unpublished)

Conlon, Jo and Taylor, Andrew (2017) Collaborate into the Future: Connecting design and business practice with Product Life-cycle Management (PLM). In: School of Art, Design & Architecture Teaching & Learning Conference: Making a Impact - 2017, 10th January 2017, University of Huddersfield Business School. (Unpublished)

Conlon, Jo and Taylor, Andrew (2016) Radicalising your Lifecycle’s full potential with PLM. In: Radicalising your Lifecycle’s full potential with PLM, 21st June 2016, University of Huddersfield. (Unpublished)

Dean, Lionel Theodore, Atkinson, Paul and Unver, Ertu (2005) Evolving individualised consumer products. In: 6th International Conference of the European Academy of Design, 29-31 March 2005, University of the Arts, Bremen.

Denton, Paul (2005) Business Strategy Driven Information Technology Systems. In: Proceedings of the 18th ICPR: The Networked Enterprise, July 31-August 4 2005, Fisciano, Italy.

Denton, Paul (2005) An Enterprise Engineering Approach for Supply Chain Systems Design and Implementation. In: Proceedings of SCMIS2005: 3rd International Workshop on Supply Chain Management and Information Systems, 6th - 8th July 2005, Thessaloniki, Greece.

Denton, Paul, Brown, R. S. A. and Morgan, E. (2012) The Development of a Sustainable Approach to Learner-Employer Engagament. In: National HE STEM Programme Conference, 4-6 September 2012, Birmingham, UK.

Denton, Paul, Hajjaji, Mufeed and Bashir, Abid (2010) Internal Supply Chain Management within SMEs: When ERPII Is Not Enough? In: The 4th International Conference on Operations and Supply Chain Management, 25-31 July 2010, Hong Kong and Guangzhou, China.

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh and Muhamedsalih, Hussam (2014) Wavelength Scanning Interferometery for large area roll to roll metrology applications in photovoltaic manufacturing environment. In: 10th LVMC Large Volume Metrology Conference and Exhibition, 18th -20th November 2014, The Mercure Manchester Piccadilly, UK.

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh, Muhamedsalih, Hussam and Gao, F. (2014) Wavelength Scanning Interferometry for PV Production In-line Metrology. In: 3rd Annual EPSRC Manufacturing the Future Conference, 23rd – 24th September 2014, Glasgow Science Centre, Glasgow, UK.

Elrawemi, Mohamed, Blunt, Liam and Greaves, Graeme (2015) Nano scale Characterisation of Photovoltaic Ultra Barrier Films. In: 2nd International Conference on Nanotechnology, Nanomaterials & Thin Films for Energy Applications, 1-3 June 2015, Manchester, UK.

Elrawemi, Mohamed, Blunt, Liam, Muhamedsalih, Hussam, Fleming, Leigh and Gao, Feng (2014) Verification of an in Process Optical System based on High Resolution Interferometry for Detecting Flexible PV Barrier Films Defects. In: Photon14, 1-4 September 2014, Imperial College, London, UK.

Elrawemi, Mohamed, Muhamedsalih, Hussam, Blunt, Liam, Fleming, Leigh, Martin, Haydn and Jiang, Xiang (2014) Comparative study between online and offline defect assessment methods for roll to roll flexible PV modules. In: 4th International Conference on Nanomanufacturing (nanoMan2014), 8-10 July, Bremen, Germany.

Evans, C. K. and Allen, Claire (2012) Undergraduate student research skills for the 21st century: Pedagogical investigation for engaging the millennials beyond surface learning. In: 9th ICED Conference 2012, 23-25 July 2012, Bangkok, Thailand.

Evans, C.K. (2010) Case Study: The Fashion Archive at the University of Huddersfield. In: Look-here! Project User Needs and Pedagogy Workshop, October 2010, JISC Offices, London. (Unpublished)

Evans, Claire and Shah, Karen (2016) Integrating digital tools into the creative pattern experience. In: Fashion: Exploring Critial Issues, 8th Interdisipinary Fashion Conference, 5-7 Sep 2016, Oxford. (Unpublished)

Ford, Derek G., Longstaff, Andrew P., Freeman, J.M. and Postlethwaite, S. R. (1999) Practical calibration of tracking laser systems. In: 4th International Conference on Laser Metroogy and Machine Performance, 13 to 15 July 1999, Longhirst Hall, Northumberland.

Gao, F. and Jiang, Xiang (2017) Environmental robust interferometry for online/in-process surface inspection. In: The 2nd International Forum on Surface and Microscopy, 7-9 August 2017, Harbin, China. (Unpublished)

Gao, F., Jiang, Xiang, Muhamedsalih, Hussam and Martin, Haydn (2010) Wavelength Scanning Interferometry for Thin Film Analysis of Fusion Target. In: 3rd European Target Fabrication Workshop, 30 September-1 October, Oxford. (Unpublished)

Gao, F., Jiang, Xiang, Muhamedsalih, Hussam and Martin, Haydn (2011) Wavelength scanning interferometry for measuring transparent films of the fusion targets. In: 13th International Conference on Metrology and Properties of Engineering Surfaces 2011, 12th - 15th April 2011, Twickenham, UK.

Gao, F., Muhamedsalih, Hussam and Jiang, Xiang (2012) In-process fast surface measurement using wavelength scanning interferometry. In: 2012 International Conference on Manufacturing and Optimization, September 15-16, 2012, Beijing, China.

Gao, F., Tang, Dawei and Jiang, Xiang (2013) White Light Spectral Interferometry for Real Time Surface Profile Measurement. In: ASPEN 2013, 12-15, November 2013, Taipei, Taiwan. (Unpublished)

Gao, F., Wang, B. and Zhuang, B. (1987) A Projection Photoelectric 2D Positioning System. In: National Symposium of Opto-Electronic technology, 1987, Jilin, China.

Gao, Feng, Muhamedsalih, Hussam, Elrawemi, Mohamed, Blunt, Liam, Jiang, Xiang, Edge, Steven, Bird, David and Hollis, Philip (2014) A flexible PV barrier films defects detection system for in-situ R2R film processing. In: Special Interest Group Meeting: Structured Freeform Surfaces 2014 Programme, 19-20 Nov 2014, Padova, Italy.

Gao, Feng, Muhamedsalih, Hussam, Tang, Dawei, Elrawemi, Mohamed, Blunt, Liam, Jiang, Xiang, Edge, Steven, Bird, David and Hollis, Philip (2015) In-situ defect detection systems for R2R flexible PV barrier films. In: International Conference on Optical Instrument and Technology (OIT’2015), 17th-19th May, Beijing, China.

Goodland, J., Campean, I.F, Caunce, A., Victory, J.L. and Jupp, Martyn (2013) A Manufacturing Failure Mode Avoidance Framework for Aerospace Manufacturing. In: ASME 2013 International Mechanical Engineering Congress and Exposition, November 15–21, 2013, San Diego, California, USA.

Gosal, Hardip, Pearson, J. S. and Squires, P. L. (2002) The role of and design graduate employment research in informing curriculum development and review. In: Enhancing curricula: Exploring Effective Curricula Practices in Art, Design and Communication, 10-12 April 2002, Royal Institute of Architects, London.

Greenwood, Laura and Harris, Joanne (2014) The Power of the Forecaster: An exploration into the value of trend forecasting for the survival of small to medium enterprises in the creative industry. In: Transitions: Rethinking Textiles and Surface, 26th - 27th November 2014, University of Huddersfield, Huddersfield, United Kingdom. (Unpublished)

Greenwood, Laura, Power, Jess and Harris, Joanne (2016) The Power of the Forecaster: An Exploration into the Value of Trend Forecasting for the Survival of SME’s in the Creative Industries. In: The 90th Textile Institute World Conference, 25th – 28th April 2016, Poznan, Poland. (Unpublished)

Greenwood, Laura, Power, Jess and Harris, Joanne (2016) The power of the forecaster: An exploration into the value of trend forecasting for the survival of SME’s in the creative industry. In: The 90th Textile Institute World Conference, 25th – 28th April 2016, Poznan, Poland.

Griffin, James Marcus and Chen, Xun (2006) Classification of varying levels of ploughing, rubbing and cutting during Single Grit tests using Evolutionary Inspired Computer Techniques. In: 4th International Conference on Manufacturing Research (ICMR 2006), 5th-7th September 2006, Liverpool John Moores University, Liverpool. (Submitted)

Hajjaji, Mufeed and Denton, Paul (2011) A Case Study of Risk Management Tools Adoption Within Engineering SMEs. In: Palisade Risk Conference 2011: Risk Analysis, Applications & Training, 29th - 30th March 2011, Amsterdam, Netherlands. (Submitted)

Harris, Joanne (2014) Making It Real: A creative enterprise case study. In: Transitions: Rethinking Textiles and Surfaces, 26th - 27th November 2014, University of Huddersfield, Huddersfield, United Kingdom. (Submitted)

Hussey, Clare, Sinha, Pammi and Kelday, Fiona (2009) Responsible Design: Re-using/Recycling of Clothing. In: Design Connexity: 8th European Academy of Design Conference, 1-3 April, 2009, Aberdeen, Scotland.

Jiang, Xiang (2004) Recent advances in micro-manufacturing and micro-system. In: The 6th International Conference on Frontiers of Design and Manufacturing, 20th-24th June, 2004, Xi'an, China. (Unpublished)

Jiang, Xiang (2007) The economic management of geometrical products variability: the next generation GPS. In: 4th International CIRP-Sponsored Conference (DET2007) on Digital Enterprise Technology, 19-21 September 2007, University of Bath, UK. (Unpublished)

Jiang, Xiang, Blunt, Liam and Scott, Paul J. (2002) Fundamental research into the filtration of surface texture in geometric product specification and verification. In: 3rd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering - ICME 2002, 3rd-5th July 2002, Ischia, Italy. (Unpublished)

Jiang, Xiang, Gao, F. and Wang, Kaiwei (2010) Wavelength Scanning Interferometer for Structured Surfaces. In: ASPE Summer Topical Meeting on Precision Interferometric Metrology, 23rd - 25th June 2010, Asheville, North Carolina, USA.

Jiang, Xiang, Tang, Dawei and Gao, Feng (2015) In-Situ Surface Inspection Using White Light Channelled Spectrum Interferometer. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, 2-5 March 2015, Charlotte, North Carolina, USA. (Unpublished)

Lang, B., Goswami, Parikshit, Deacon, Sarah E., McPherson, Michael J. and Russell, Stephen J. (2013) Nanofibrous Affinity Nonwoven Membranes for Blood Purification Containing non-Antibody Binding Proteins. In: Nonwovens Innovation Academy 2013: Research and Innovation Posters.

Li, Z. and Jiang, Xiang (2005) An international strategy for China's manufacturing industry and technical standards. In: International Manufacturing Leaders Forum (IMLF 2005), 28th Feb-2nd March 2005, Glenelg Beach, Adelaide, South Australia. (Unpublished)

Lim, Hye Won, Cassidy, Tom and Cassidy, Tracy Diane (2016) A Comparative Study of National Standard and Sizing Survey between the UK and South Korea. In: International Textiles & Costume Culture Conference (ITCCC): Cultural Heritage & Fashion, 30th September - 1st October 2016, Yonsei University, Seoul, Korea.

Lim, Hye Won and Cassidy, Tracy Diane (2015) A Study of the Current Infant and Children’s Clothing Size Charts in the UK. In: 2015 International Textiles & Costume Culture Congress (ITCCC): Between World – Innovation and Design in Textiles and Costume, 4th - 6th November 2015, Marmara University, Istanbul, Turkey.

Lou, Shan, Abdou, Hussein, Zeng, Wenhan, Jiang, Xiang and Paul, Scott (2017) A Preliminary Investigation on Surface Roughness Assessment of Complex Additive Manufactured Parts Scanned by X-ray Computed Tomography. In: 7th Conference on Industrial Computed Tomography (iCT 2017), February 7 - 9, 2017, Leuven, Belgium. (Unpublished)

Maatgi, Musbah and Denton, Paul (2011) The Role of Work Environment in the Successful Implementation of ISO 9000 in SMEs. In: Fourth Scientific Symposium for Libyan Students in the UK, 15 January 2011, Cardiff, UK. (Unpublished)

MacEwen, Howard A., Fazio, Giovanni G., Lystrup, Makenzie, Batalha, Natalie, Siegler, Nicholas, Tong, Edward C., Veenendaal, Ian, Naylor, David, Gom, Brad, Gunuganti, Sudhakar, Winter, Calvin, Jones, Martyn and Walker, David D. (2016) Performance of a cryogenic test facility for 4 K interferometer delay line investigations. In: Space Telescopes and Instrumentation 2016, June 26 2016, Edinburgh.

Maktabi, Mohamad, Carnie, Bruce, Mao, N. and Goswami, Parikshit (2015) Enhancement of the Aesthetics Appearance and Softness of Knitted Spacer Fabric. In: 5th Smartex - 2015 Egypt (World Textiles Conference), 23-25 November 2015, Karf El-Shaikh, Egypt.

Marshall, Justin, Unver, Ertu and Atkinson, Paul (2007) AutoMAKE: Generative systems, digital manufacture and craft production. In: Generative Art Conference, 11th -14th December 2007, Milan, Italy.

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2015) FEA-based design study for optimising non-rigid error detection on machine tools. In: Laser Metrology, Machine Tool, CMM & Robotic Performance (LAMDAMAP), 17th - 18th March, 2015, Univeristy of Huddersfield.

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2012) An efficient offline method for determining the thermally sensitive points of a machine tool structure. In: 37th International Matador Conference, 25th-27th July 2012, Manchester, England.

Miller, M.R., Hall, David and Little, David (2003) The definition of success within Yorkshire manufacturing SMEs. In: Sixth SMESME International Conference, 1-4 June 2003, Athens, Greece. (Unpublished)

Minshull, Lauren and Dehe, Benjamin (2017) Implementing Lean techniques within micro-enterprises: a case of Cedar Labels. In: POMS 28th Annual Conference, May 5-8 2017, Seattle, WA. (Unpublished)

Moscovitch, Tim (2003) The Consumer Design Agenda? In: 5th European Academy of Design Conference, April 2003, Universitat de Barcelona, Spain.

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2011) Acceleration computing process in wavelength scanning interferometry. In: 10th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2011), 29th June - 2nd July 2011, Daejeon, S. Korea. (Unpublished)

Navarro, Ramón, Walker, D.D., Cunningham, Colin R., Beaucamp, A., Evans, R., Prieto, Eric, Fox-Leonard, T., Fairhurst, N., Gray, C., Hamidi, S., Li, H., Messelink, W., Mitchell, J., Rees, P. and Yu, G. (2012) Edge-control and surface-smoothness in sub-aperture polishing of mirror segments. In: Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II.

Navarro, Ramón, Burge, James H., Yu, Guoyu, Wu, Hsing-Yu, Walker, David D., Zheng, Xiao, Li, Hongyu, Dunn, Christina and Gray, Caroline (2016) Optimisation of grolishing freeform surfaces with rigid and semi-rigid tools. In: Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II Ramón Navarro; James H. Burge, June 26 2016, Edinburgh.

O'Brien, Mark, Sun, Qian and Zhoui, Fang (2009) Consultants, Clients and Chinese context: Managing Brands in China. In: D2B2: the 2nd Tsinghua International Design Management Symposium, 23-26 April 2009, Tsinghua University , Beijing , China.

O'Haire, Tom, Russell, Stephen J. and Goswami, Parikshit (2016) High-modulus, Melt Spun Polycaprolactone Fibres for Biomedical Grafts. In: The Fiber Society Spring Meeting and Technical Conference 2016, 25-27 May 2016, Mulhouse, France.

Olabode, Olaide Felix, Fletcher, Simon, Longstaff, Andrew P. and Mian, Naeem S. (2019) Core Temperature Measurement in Subtractive Manufacturing Processes. In: Laser Metrology and Machine Performance (LAMDAMAP) 2019", 13th March-14th March, 2019, AMRC, Sheffield, UK.

Pearson, J. S. and Squires, P. L. (2004) The Changing Face of the UK Textiles: How Should Education Respond? In: 83rd World Conference of the Textile Institute, 23-27 May 2004, ShanghaiMart, Shanghai, China.

Peng, H., Liu, X., Jiang, Xiang and Wang, Y. (2007) Concurrent tolerance design based on a comprehensive model of manufacturing cost-quality loss. In: 10th International Conference on Computer Aided Tolerancing, 21st-23rd March, 2007, Erlangen, Germany. (Unpublished)

Pettican, Anneké, Mojsiewicz, Kristin and Lewis, Chara (2013) Barnaby Artists in Conversation: A new art scene for Macclesfield? In: Barnaby Artists in Conversation: A new art scene for Macclesfield?, 30 June 2013, Christ Church, Macclesfield. (Unpublished)

Peña-Cruz, Manuel, Arancibia-Bulnes, Camilo and Abdul-Rahman, Hussein S. (2012) Fringe reflection technique for heliostats: A comparison between two phase retrieval methods. In: Proceedings of SolarPaces 2012, September 11-14, Marrakech, Morocco.

Phromphen, Phannaphat, Mao, Ningtao, Russell, Stephen J. and Goswami, Parikshit (2015) Liquid Permeation and Water Vapour Transmission Properties of a Temperature-Sensitive PVDF-g-NIPAAM Barrier Membrane. In: 15th Autex World Textile Conference 2015, 10-12 June 2015, Bucharest, Romania.

Power, Jess (2015) Integration Of Performance Materials Into The Clothing Curriculum. In: Global Textile Congress, 13th-15th February 2015, Bangkok, Thailand.

Power, Jess (2017) User centred design for medical products. In: 2nd Skin Integrity & Infection Prevention Conference, 26-27 June 2016, University of Huddersfield. (Unpublished)

Power, Jess and Almond, Kevin (2016) Creative cut: plenary. In: The Second International Conference for Creative Pattern Cutting, 24 and 25 February 2016, Huddersfield, UK. (Unpublished)

Power, Jess, Harris, Joanne and Leaper, David J. (2016) Using QFD As A Method To Develop Functional Medical Products For Children With Cancer. In: The 90th Textile Institute World Conference, 25th – 28th April 2016, Poznan, Poland.

Rascher, Rolf, Fähnle, Oliver, Wünsche, Christine, Schopf, Christian, Faehnle, Oliver, Yu, Guoyu and Walker, David D. (2016) Analysis of tool-mass-acceleration effects onto sub-aperture computer controlled polishing (CCP). In: Third European Seminar on Precision Optics Manufacturing.

Savini, G., Ade, P.A.R., Baccichet, N., Bracken, C., Dohlenh, K., Donohoe, A., Gom, B., Griffin, M.J., Holland, W., Iafolla, V., Ivison, R.J., Jones, M., Juanola-Parramon, R., Lightfoot, J., Liu, S., McMillan, A., Murphy, J.A., Naylor, D., O'Sullivan, C., Pascale, E., Pezzutto, S., Rakotonimbahy, E., Schito, D., Spencer, L., Spinoglio, L., Swinyard, B., Venendaal, I., Vives, S., Walker, D.D., Leisawitz, D., Shi, S. and Matsuo, H. (2015) Progress in the critical assessment for a far-infrared space interferometer with double fourier modulation (FP7-FISICA). In: UNSPECIFIED.

Shah, Karen (2016) Explorations in Time and Space: Re-thinking Global Recycling Practices. In: Costume and Fashion in Context and Practice symposium, 5-6th December 2016, Heritage Quay, University of Huddersfield. (Unpublished)

Shah, Karen and Evans, Claire (2016) A Space of Waste. In: Circular Transitions, 23rd - 24th November 2016, Tate Modern. (Submitted)

Shah, Karen and Kahabi, Charles (2016) Development of A Tanzanian National Dress: Explroations in Co-design , Recycling and Identity. In: Non Western Fashion Conference, 24th - 25th November 2016, Antwerp. (Submitted)

Sinha, Pammi, Cockroft, Laurence and Carr, Chris (2008) Design Education in Tanzania; Design Skills & Marketing Capabilities for a Developing Economy. In: Creative Clusters Conference: the creative Economy in Smaller Nations, 16th - 19th November 2008, Glasgow, Scotland. (Unpublished)

Sinha, Pammi, Dissanayake, D. G. K., Hussey, Clare, J. and Bartlett, Caroline (2009) Recycled Fashion. In: Taking up the Global Challenge: 15th Annual International Sustainable Sustainable Development Research Conference, 5-9 July, 2009, Utrecht University, the Nethelands. (Unpublished)

Sinha, Pammi and Shah, Rohit (2010) Creating a global vision for sustainable textiles. In: "Textiles: A Global Vision" the Textiles Institute Centenary World Conference, 3-4 November 2010, Manchester, UK.

Sun, Qian, Sridhar, Naren and O'Brien, Mark (2009) Consumer Perception Of Product Stimuli: An Investigation into Indian Consumer Psychology and its Implications for New Product Development, Process and Strategy. In: D2B2: the 2nd Tsinghua International Design Management Symposium, 23-26 April 2009, Tsinghua University , Beijing , China.

Swann, David (2013) Designing Out Curative Syringe Reuse: Maximising Global Acceptance and Impact by Design. In: 2nd European conference on Design4Health, 3-5 July 2013, Sheffield Hallam University. (Unpublished)

Swinyard, B., Auriacombe, O., Bradshaw, T., Brooks, D., Charlton, J., Crook, M., Davies, G., Ellison, B., Emes, M., Friend, J., Gerber, D., Gray, C., Henry, M., Hunt, T., Linfield, E., Navarathinam, N., Parks, S., Rawlings, T., Rea, S., Saunders, C., Savini, G., Tun, S.M., Walker, D.D., Wang, H. and Winter, B. (2016) The LOw Cost Upper atmosphere Sounder: the "Elegant Breadboard" programme. In: Millimeter Waves and THz Technology Workshop.

Tabriz, Md Shams E, Barrans, Simon and Bills, Paul J. (2017) Effect of machining parameters on surface roughness in Al 2618 alloy subject to multi-axis machining process using ball nose cutting tools. In: ICMAE 2017: 8th International Conference on Mechanical and Aerospace Engineering, 22-25 July 2017, Prague, Czech Republic.

Tang, Dawei, Gao, Feng and Jiang, Xiangqian (2014) Cylindrical Lenses Based Spectral Domain Low-Coherence Interferometry for On-line Surface Inspection. In: Euspen 14th International Conference & Exhibition, 2nd - 6th June 2014, Dubrovnik, Croatia.

Taylor, Andrew, Lewis, Linda and Ward, Geoff (2013) Research into 3D Printed Materials & Methods: An exploratory practice based approach into the application of 3D technologies for textile & surface design. In: Materials Coloration - past, present and future of textile printing, Wednesday 13th February 2013, University of Huddersfield. (Unpublished)

Taylor, Andrew and Unver, Ertu (2005) Ethical Praxis in Body Scanning:An Experimental Study into 3D laser Scanning in Fashion and Textiles/Surface Design. In: CADE 2005 Post graduate research conference:, 23-24th March 2005, Watershed: 1 Canon's Road, Harbourside, Bristol BS1 5TX. (Unpublished)

Taylor, Andrew, Unver, Ertu and Benincasa-Sharman, Caterina (2014) Material shifts in praxis: Projections of digital humanities embodied within space and place. In: Transition: Re-thinking Textiles and Surfaces, 26th and 27th November 2014, School of Art, Design and Architecture, University of Huddersfield, Huddersfield, UK. (Submitted)

Tong, Zhen and Luo, Xichun (2013) An atomistic investigation of nanometric cutting process using a multi-tip single crystal diamond tool. In: Lamdamap 10th International Conference, 20th-21st March 2013, Buckinghamshire, UK.

Tonnellier, X., Shore, P., Morantz, P., Baldwin, A., Evans, R. and Walker, D.D. (2007) Comparison of the subsurface damage induced when precision grinding ULE® and Zerodur® surfaces. In: UNSPECIFIED.

Tonnellier, X., Shore, P., Morantz, P., Baldwin, A., Walker, D.D. and Evans, R. (2006) Subsurface damage caused during rapid grinding of Zerodurâ. In: UNSPECIFIED.

Townsend, Andrew, Racasan, Radu, Bills, Paul J. and Blunt, Liam (2017) Development of an interlaboratory comparison investigating the generation or areal surface texture per ISO 25178 from XCT. In: 7th Conference on Industrial Computed Tomography (iCT 2017), February 7 - 9, 2017, Leuven, Belgium.

Unver, Ertu and Koc, Erdem (1990) Conversion of a conventional lathe into a computer control machine using AC motors. In: 4th Machine Design and Manufacturing Congress, 1990, METU, Turkey.

Unver, Ertu and Koc, Erdem (1993) Development of a DYNA CNC simulation software and part program transfer into a CNC lathe. In: 6th Machine Theory Conference, 1993, Trabzon, Turkey.

Unver, Ertu, Sorbie, Chris, Silkstone, Robert, Kagioglou, Mike, Paxman, Richard and Burke, Patrick (2016) Design and Development of a Medical Product Using 3D Technologies: Scalp Cooling Cap Design Case Study. In: International Conference on Sustainable Smart Manufacturing (S2M), 20 - 22 Oct, 2016, Portugal. (Unpublished)

Walker, D.D., Beaucamp, A., Doubrovski, V., Dunn, C., Evans, R., Freeman, R., McCavana, G., Morton, R., Riley, D., Simms, J., Yu, G. and Wei, X. (2008) Commissioning of the first Precessions 1.2m CNC Polishing Machines for Large Optics. In: UNSPECIFIED.

Walker, D.D., Bingham, R. and Bigelow, B. (1993) Adaptive Optics with No Additional Surfaces. In: UNSPECIFIED. (Submitted)

Walker, D.D., Dunn, C., Yu, G., Bibby, M., Zheng, X., Wu, H.Y., Li, H. and Lu, C. (2015) The role of robotics in computer controlled polishing of large and small optics. In: Optical Manufacturing and Testing XI, August, 2015, San Diego, CA.

Walker, D.D., Freeman, R., Hobbs, G., King, A., McCavana, G., Morton, R., Riley, D. and Simms, J. (2005) Zeeko 1 metre polishing system. In: UNSPECIFIED.

Walker, D.D. and Hutchinson, M. (2005) Matching Manufacturing and Measurements-solutions for Free-Form Surfaces. In: UNSPECIFIED.

Walker, David D. (2016) CNC Polishing and Metrology – from E-ELT Segments to Commercial Optics. In: Academic seminar by Prof David Walker: The Institute of Optics And Electronics, The chinese Academy of Sciences:, 6-8 June 2016, Chengdu, China. (Unpublished)

Ward, Lisa J. and Gaffikin, Jane A. (2009) Student Placement Journeys - An On-line collection of video resources showcasing the development of students on one year work placements with the views from their employers and placement tutors. In: 18th World Conference for Co-operative Education, 'An International Dialogue in Vancouver', July, 2009, Vancouver, Canada. (Unpublished)

Williamson, James, Martin, Haydn and Jiang, Xiang (2013) A Dispersed Reference Interferometer for Surface and Dimensional Metrology. In: Manufacturing the future conference 2013, 17-18 September 2013, Cranfield University, UK.

Xu, Yongjia, Gao, Feng, Zhang, Zonghua and Jiang, Xiang (2017) A calibration method for non-overlapping cameras based on mirrored phase target. In: The 13th International Symposium on Measurement Technology and Intelligent Instruments, 22-25 September 2017, Xi'an, Shaanxi, China. (Unpublished)

Zeng, Wenhan, Jiang, Xiang, Lou, Shan, Abdul-Rahman, Hussein S. and Scott, Paul J. (2016) Complex Structured Surface Characterisation by using PDE based Adaptive Nonlinear Diffusion Filter. In: International Workshop on Mathematics and Statistics for Metrology, 7-9th November 2016, Berlin, Germany. (Unpublished)

Zeng, Wenhan, Jiang, Xiang, Lou, Shan and Scott, Paul J. (2016) A Key Point Method for Data Registration for MultiSensor Fusion. In: EUSPEN 16th International Conference & Exhibition, 30th May - 3rd June 2016, Nottingham, UK. (Unpublished)

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2009) A Generalised Linear and Nonlinear Spline filter. In: 12th International Conference on Metrology and Properties of Engineering Surfaces, 8-10 July 2009, Rzeszów, Poland. (Submitted)

Zeng, Wenhan, Lou, Shan, Abdul-Rahman, Hussein S., Jiang, Xiang and Scott, Paul J. (2017) Simultaneous Multi-type Feature Separation for Complex Structured Surface Analysis. In: Lamdamap 12th International Conference & Exhibition, 15-16th March 2017, Renishaw Innovation Centre, UK. (Unpublished)

Zhang, Peng, Li, Jie, Yu, Guoyu and Walker, David D. (2016) Development of Swinging Part Profilometer. In: Optics and Measurement 2016, 11th-14th October 2016, Liberec, Czech Republic. (Unpublished)

Zhang, Tao, Gao, Feng and Jiang, Xiang (2017) A method for inspecting double-sided high-sloped structured surfaces based on dual-probe wavelength scanning interferometer. In: The 13th International Symposium on Measurement Technology and Intelligent Instruments, 22-25 September 2017, Xi'an, Shaanxi, China. (Unpublished)

Zhang, Zonghua, Huang, Shujun, Gao, Nan, Gao, F. and Jiang, Xiang (2017) Full-Field 3D Shape Measurement of Specular Object Having Discontinuous Surfaces. In: International Conference on Optical and Photonic Engineering (icOPEN 2017), 5-7 April 2017, Singapore.

Book

Lee, Jenny (2015) Material Alchemy. BIS Publshers, Amsterdam, Netherlands. ISBN 9789063693763

Luo, Xichun, Cao, Yi and Tong, Zhen (2015) Proceedings of the 20th International Conference on Automation and Computing (ICAC'14) Future Automation, Computing & Manufacturing. ICAC, 14 . University of Strathclyde Press, Strathclyde, UK. ISBN 978-1-909522-02-2

Smithurst, Peter (1987) The Cutlery Industry. Shire Albums . Shire Publications. ISBN 978-0852638705

Thesis

Adesta, Erry Yulian Triblas (2002) A reference model for extended extended enterprise. Doctoral thesis, University of Huddersfield.

Akowua, Kwame D.B (2018) Integration of On-Machine Surface Metrology and Machining Process Prediction. Doctoral thesis, University of Huddersfield.

Al-Bashir, Saif (2019) Multi-Wavelength Polarising Interferometer for In-Process Metrology. Doctoral thesis, University of Huddersfield.

Alegeh, Nurudeen Eshiemoghie (2021) Condition Monitoring of Machine Tool Ball Screw Feed Drives Through Signal Analysis and Artificial Intelligence. Doctoral thesis, University of Huddersfield.

Binder, Jonathan (2019) Investigation of Additive Manufacturing in New Medical Product Development for Chemotherapy-Induced Alopecia. Masters thesis, University of Huddersfield.

Chahid, Younes (2021) Metrology of Additive Manufactured Lattice Structures. Doctoral thesis, University of Huddersfield.

Denton, Paul (2002) Business Strategy Driven IT Systems For Engineer-To-Order and Make-To-Order Manufacturing Enterprises. Doctoral thesis, Loughborough University.

Hurreeram, Dinesh Kumar (2003) Development of a manufacturing strategy for apparel manufacture in Mauritius using a systems modelling approach. Doctoral thesis, University of Huddersfield.

Jones, Sharon (2021) Fashion is Disconnected: exploring the potential of design-integrated, locally-based manufacturing units to reconnect designer and maker, and ultimately reconnect the consumer with the garment creation process for a new system of Fashion 2.0. Masters thesis, University of Huddersfield.

Kangley, Harvey (2020) Barriers to Implementing PD Process Change in a British Manufacturing SME: A Case Study. Masters thesis, University of Huddersfield.

Liu, Weidong (2021) VERIFICATION OF X‐RAY COMPUTED TOMOGRAPHY FOR ADDITIVE MANUFACTURING DIMENSIONAL & SURFACE TEXTURE METROLOGY AND DEPLOYMENT TO INTERNAL GEOMETRY MEASUREMENT. Masters thesis, University of Huddersfield.

Liu, Yue (2021) IN- SITU STRUCTURED LIGHT TECHNIQUES STUDY TO INSPECT SURFACES DURING ADDITIVE MANUFACTURE. Doctoral thesis, University of Huddersfield.

Mahwera, Danford Anselm (2019) A STUDY ON STRATEGY FOR DEVELOPMENT OF A COMPETITIVE TEXTILE SECTOR IN TANZANIA. Doctoral thesis, University of Huddersfield.

Needham, Paul M. (2008) Design for manufacture: a methodology to evaluate an aircraft design in order to ensure its manufacturability. Doctoral thesis, University of Huddersfield.

Qin, Yuchu (2021) Automatic Determination of Part Build Orientation for Laser Powder Bed Fusion Additive Manufacturing. Doctoral thesis, University of Huddersfield.

Salami, Fawaz Adisa (2021) CHINESE INVESTMENT IMPACT ON MANUFACTURE SECTOR GROWTH AND SOCIO-ECONOMIC DEVELOPMENT IN DEVELOPING AFRICAN COUNTRIES: A CASE STUDY OF THE LEKKI FREE ECONOMIC ZONE IN LAGOS, NIGERIA. Doctoral thesis, University of Huddersfield.

Tabriz, Md Shams E (2019) The Effect of Machining Marks on the Stress Distribution and Fatigue Durability of Turbocharger Compressor Wheels. Doctoral thesis, University of Huddersfield.

Townsend, Andrew (2018) Characterisation of the Surface Topography of Additively Manufactured Parts. Doctoral thesis, University of Huddersfield.

Patent

Swann, David (2013) Safer Disposable Syringe. GB 555666777.1.

Swann, David (2012) Self-destruction syringe. GB111222333.

Unver, Ertu, Paxman, Glenn Alan and Paxman, Neil Eric (2016) Heat exchanger : Scalp Cooling Cap, WorlWide patent, WO2016/046534 A1 ― 2016-03-31. WO2016/046534.

Unver, Ertu, Paxman, Glenn Alan and Paxman, Neil Eric (2016) Heat exchanger : Scalp Cooling cap, Worldwide Patent WO 2016/046535 A1. WO 2016046534 A1.

Artefact

Macbeth, P.A. (1995) Major Fabric Design Collection for Habitat UK. [Artefact]

Unver, Ertu (1997) Design, Development and Manufacturing of A Game Machine Security Device. [Artefact] (Unpublished)

Show/Exhibition

Almond, Kevin and Brennand, Kathryn (2013) Insufficient Allure: The Art of Creative Pattern Cutting ('Behind the Seams' Acquisition). [Show/Exhibition]

Brennand, Kathryn and Evans, C. K. (2014) University of Huddersfield Graduate Fashion Show 2014. [Show/Exhibition]

Goldthorpe, Charlotte, Evans, Claire and Wigley, Stephen M. (2013) Snibston Discovery Museum 'Acceptable in the 80s' Exhibition. [Show/Exhibition]

Pardo, Jorge (2012) Tecoh (Architectural Commission). [Show/Exhibition]

Swann, David (2013) 21st Century Nursing Bag (Healthcare Innovation Expo). [Show/Exhibition]

Swann, David (2013) Mobilising Healthcare (ROTOR). [Show/Exhibition]

Video

Evans, C. K. and Allen, Claire (2012) Exploring interactive possibilities: the journey so far. [Video] (Unpublished)

Evans, C. K. and Allen, Claire (2011) Ryedale. [Video] (Unpublished)

Audio

Benincasa-Sharman, Caterina Amanda (2012) BBC Stoke Breakfast with Pete Morgan - Caterina Benincasa-Sharman talking about Staffordshire's contribution to the 1951 Festival of Britain in the London based and Travelling Exhibitions. [Audio]