Search:
Computing and Library Services - delivering an inspiring information environment

Items where Subject is "T Technology > TS Manufactures"

Up a level
Export as [feed] RSS
Jump to: 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1990 | 1987
Number of items at this level: 237.

2015

Abusaad, Samieh, Benghozzi, Ahmed, Smith, Ann, Gu , Fengshou and Ball, Andrew (2015) The Detection of Shaft Misalignments using Motor Current Signals from a Sensorless Variable Speed Drive. In: Vibration Engineering and Technology of Machinery. Mechanisms and Machine Science (23). Springer, London, pp. 173-183. ISBN 978-3-319-09918-7

2014

Abdulshahed , Ali M, Longstaff , Andrew P and Fletcher, Simon (2014) A novel approach for ANFIS modelling based on Grey system theory for thermal error compensation. In: 14th UK Workshop on Computational Intelligence. UKCI (2014). IEEE, Bradford, :UK. ISBN 978-1-4799-5538-1 (In Press)

Abusaad, Samieh, Benghozzi, Ahmed, Brethee, Khaldoon F., Gu , Fengshou and Ball, Andrew (2014) Investigating the Effect of Water Contamination on Gearbox Lubrication based on Motor Control Data from a Sensorless Drive. In: Proceedings of the 3rd international workshop and congress on eMaintenance: June 17-18 Luleå, Sweden : eMaintenance, Trends in technologies & methodologies, challenges, possibilites and applications. Luleå tekniska universite, Luleå, pp. 61-67. ISBN 978-91-7439-972-1

Blunt, Liam, Elrawemi, Mohamed, Fleming, Leigh, Robbins, David and Muhamedsalih, Hussam (2014) In-line metrology for defect assessment on large area Roll 2 Roll substrates. In: Proceedings of 1th IMEKO TC14 Symposium on Laser Metrology for Precision Measurement and Inspection in Industry (LMPMI 2014). Curran Associates, pp. 9-12. ISBN 9781632667311 (In Press)

Chen, Xiaomei and Koenders, Ludger (2014) A novel pitch evaluation of one-dimensional gratings based on a cross-correlation filter. Measurement Science and Technology, 25 (4). 044007. ISSN 0957-0233

Chen, Xiaomei, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2014) Analysing and evaluating a dual-sensor autofocusing method for measuring the position of patterns of small holes on complex curved surfaces. Sensors and Actuators A: Physical, 210. pp. 86-94. ISSN 0924-4247

Chen, Xiaomei, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2014) Deployment and evaluation of a dual-sensor autofocusing method for on-machine measurement of patterns of small holes on freeform surfaces. Applied Optics, 53 (10). pp. 2246-2255. ISSN 1559-128X

Chen, Xiaomei, Longstaff, Andrew P., Parkinson, Simon and Myers, Alan (2014) A Method for Rapid Detection and Evaluation of Position Errors of Patterns of Small Holes on Complex Curved and Freeform Surfaces. International Journal of Precision Engineering and Manufacturing, 15 (2). pp. 209-217. ISSN 2234-7593

Dawei, Tang, Feng, Gao and Xiangqian, Jiang (2014) Cylindrical Lenses Based Spectral Domain Low-Coherence Interferometry for On-line Surface Inspection. In: Euspen 14th International Conference & Exhibition, 2nd - 6th June 2014, Dubrovnik, Croatia.

Elrawemi, Mohamed, Blunt, Liam and Fleming, Leigh (2014) Metrology and Characterisation of Defects on Barrier Layers for Thin Film Flexible Photovoltaics. In: Proceedings of EUSPEN 14th International Conference 2014. EUSPEN, Dubrovnik, Croatia, pp. 165-168. ISBN 978-0-9566790-3-1

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh, Bird, David, Robbins, David and Sweeney, Francis (2014) Modelling water vapor permeability through atomic layer deposition coated photovoltaic barrier defects. Thin Solid Films. (In Press)

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh, Muhamedsalih, Hussam and Gao, F. (2014) Wavelength Scanning Interferometry for PV Production In-line Metrology. In: 3rd Annual EPSRC Manufacturing the Future Conference, 23rd – 24th September 2014, Glasgow Science Centre, Glasgow, UK.

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh, Sweeney, Francis and Robbins, David (2014) Defect Detection in Thin-film Photovoltaics; Towards Improved Efficiency and Longevity. In: 5th International Renewable Energy Congress. IREC 2014 . IEEE, Hammamet, Tunisia, pp. 524-528. ISBN 978-1-4799-2196-6

Elrawemi, Mohamed, Blunt, Liam, Muhamedsalih, Hussam, Fleming, Leigh and Gao, Feng (2014) Verification of an in Process Optical System based on High Resolution Interferometry for Detecting Flexible PV Barrier Films Defects. In: Photon14, 1-4 September 2014, Imperial College, London, UK.

Elrawemi, Mohamed, Muhamedsalih, Hussam, Blunt, Liam, Fleming, Leigh, Martin, Haydn and Jiang, Xiang (2014) Comparative study between online and offline defect assessment methods for roll to roll flexible PV modules. In: 4th International Conference on Nanomanufacturing (nanoMan2014), 8-10 July, Bremen, Germany.

Muhamedsalih, Hussam, Blunt, Liam, Martin, Haydn, Jiang, Xiang and Elrawemi, Mohamed (2014) An interferometric auto-focusing method for on-line defect assessment on a roll-to-roll process using wavelength scanning interferometry. In: Proceedings of EUSPEN 14th International Conference 2014. EUSPEN, Dubrovnik, Croatia, pp. 177-180. ISBN 978-0-9566790-3-1

2013

Abdulshahed, Ali, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Application of GNNMCI(1, N) to environmental thermal error modelling of CNC machine tools. In: The 3rd International Conference on Advanced Manufacturing Engineering and Technologies. KTH Royal Institute of Technology, Stockholm, Sweden , pp. 253-262. ISBN 9789175018928

Abdulshahed, Ali, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Comparative study of ANN and ANFIS prediction models for thermal error compensation on CNC machine tools. In: Proceedings of 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance 2013. LAMDAMAP 2013 . EUSPEN, Buckinghamshire, UK. (In Press)

Abusaad, Samieh, Benghozzi, Ahmed, Gu, Fengshou and Ball, Andrew (2013) Utilizing Data from a Sensorless AC Variable Speed Drive for Detecting Mechanical Misalignments. In: Damage Assessment of Structures. DAMAS 2013, X . Trans Tech Publications Ltd., Dublin, Ireland, pp. 465-472. ISBN 978-3-03785-796-0

Almond, Kevin and Brennand, Kathryn (2013) Insufficient Allure: The Art of Creative Pattern Cutting ('Behind the Seams' Acquisition). [Show/Exhibition]

Awwad, Abdulkareem S., Al Khattab, Adel A. and Anchor, J.R (2013) Competitive Priorities and Competitive Advantage in Jordanian Manufacturing. Journal of Service Science and Management, 06 (01). pp. 69-79. ISSN 1940-9893

Blunt, Liam, Elrawemi, Mohamed, Fleming, Leigh, Martin, Haydn, Muhamedsalih, Hussam and Robbins, David (2013) Development of the basis for in process metrology for roll to roll production of flexible photovoltaics. In: Proceedings of the 11th IMEKO TC14 Symposium on Laser Metrology for Precision Measurement and Inspection in Industry. International Measurement Confederation (IMEKO) , Gdansk, Poland, pp. 363-366. ISBN 978-1-63266-817-2

Blunt, Liam, Elrawemi, Mohamed, Fleming, Leigh, Martin, Haydn, Muhamedsalih, Hussam and Robbins, David (2013) Metrology for in process metrology for roll to roll production of flexible photovoltaics. In: Metrology Technologies to Enable Reel to Reel Processing of Emerging Products, November 20, 2013, National Physical Laboratory , Teddington, Middlesex, UK.. (Unpublished)

Blunt, Liam, Elrawemi, Mohamed, Fleming, Leigh and Sweeney, Francis (2013) Correlation of micro and nano–scale defects with WVTR for aluminium oxide barrier coatings for flexible photovoltaic modules. International Journal of Precision Technology, 3 (3). pp. 290-302. ISSN 1755-2060

Blunt, Liam, Fleming, Leigh, Elrawemi, Mohamed, Robbins, David and Muhamedsalih, Hussam (2013) In-line metrology of functional surfaces with a focus on defect assessment on large area Roll to Roll substrates. In: Proceedings of the 13th international conference of the european society for precision engineering and nanotechnology. EUSPEN, Germany, Berlin , pp. 71-74. ISBN 13:978-0-9566790-2-4

Blunt, Liam, Robbins, David, Fleming, Leigh and Elrawemi, Mohamed (2013) The Use of Feature Parameters to Assess Barrier Properties of ALD coatings for Flexible PV Substrates. In: 14th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2013) , June 17-21, 2013, Taipei, Taiwan .

Chen, Xiaomei and Koenders, Ludger (2013) A novel pitch evaluation method based on a cross-correlation filter. In: Nanoscale 2013, 25-26, April 2013, Paris, France. (Unpublished)

Coles, Alex (2013) Art Houses. ICON Magazine (119). pp. 108-115.

Elrawemi, Mohamed, Blunt, Liam and Fleming, Leigh (2013) Process Practice and its Effects on Surface Defects on Flexible PV Barrier Films. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 49-54. ISBN 9781862181212

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh and Sweeney, Francis (2013) Further Development of Surface Metrology Methods for Predicting the Functional Performance of Flexible PV Barrier Films. Surface Topography: Metrology and Properties, 1 (1). 015006. ISSN 2051-672X

Fleming, Leigh, Blunt, Liam, Robbins, David and Elrawemi, Mohamed (2013) Characterisation techniques to assess functional properties of barrier coatings for flexible PV substrates. In: Proceedings of Laser Metrology and Performance X 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. LAMDAMAP 2013 . EUSPEN, Buckinghamshire, UK, pp. 59-69. ISBN 978-0-9566790-1-7

Gao, F., Tang, Dawei and Jiang, Xiang (2013) White Light Spetral Interferometry for Real Time Surface Profile Measurement. In: ASPEN 2013, 12-15, November 2013, Taipei, Taiwan. (Unpublished)

He, Xiaocong, Baoying , Xing1, Kai , Zeng, Gu, Fengshou and Ball, Andrew (2013) Numerical and experimental investigations of self-piercing riveting. International Journal of Advanced Manufacturing Technology, 69 (1-4). pp. 715-721. ISSN 0268-3768

Hua Tan, K., Denton, Paul, Rae, R. and Chung, L. (2013) Managing Lean Capabilities through Flexible Workforce Development: A Process and Framework. Production Planning and Control, 24 (12). pp. 1066-1076. ISSN 09537287

Kus, Abdil, Unver, Ertu, Jagger, Brian and Durgun, Ismail (2013) A Study of Injection Moulding with Bismuth Alloy. In: Green Design, Materials and Manufacturing Processes. Taylor & Francis, pp. 225-232. ISBN 9781138000469

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Integrated Tactile-Optical Coordinate System for the Reverse Engineering of Complex Geometry. In: Proceedings of the 37th International MATADOR Conference. Springer, pp. 41-44. ISBN 9781447144793

Maatgi, Musbah and Denton, Paul (2013) The successful implementation of ISO9000 through work environment analysis : a UK case study perspective. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 67-72. ISBN 9781862181212

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) The significance of air pockets for modelling thermal errors of machine tools. In: Laser Metrology and Machine Performance X. Lamdamap 2013 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, 10 . EUSPEN, Bedfordshire, UK, pp. 189-198. ISBN 978-0-9566790-1-7

Power, Jess (2013) Fabric objective measurements for commercial 3D virtual garment simulation. International Journal of Clothing Science and Technology, 25 (6). ISSN 0955-6222

Power, Jess (2013) Fabric objective measurements for commercial 3D virtual garment simulation. International Journal of Clothing Science and Technology, 25 (6). pp. 423-439. ISSN 0955-6222

Swann, David (2013) 21st Century Nursing Bag (Healthcare Innovation Expo). [Show/Exhibition]

Swann, David (2013) Designing Out Curative Syringe Reuse: Maximising Global Acceptance and Impact by Design. In: 2nd European conference on Design4Health, 3-5 July 2013, Sheffield Hallam University. (Unpublished)

Swann, David (2013) Mobilising Healthcare (ROTOR). [Show/Exhibition]

Swann, David (2013) Safer Disposable Syringe. GB 555666777.1.

Taylor, Andrew, Lewis , Linda and Ward, Geoff (2013) Research into 3D Printed Materials & Methods: An exploratory practice based approach into the application of 3D technologies for textile & surface design. In: Materials Coloration - past, present and future of textile printing, Wednesday 13th February 2013, University of Huddersfield. (Unpublished)

Thornton, Sabrina, Henneberg, Stephan C. and Naudé, Peter (2013) Understanding types of organizational networking behaviors in the UK manufacturing sector. Industrial Marketing Management, 42 (7). pp. 1154-1166. ISSN 00198501

Wigley, Stephen M., Nobbs, K and Larson, E (2013) Making the Marque: Tangible Branding in Fashion Retail and Product Design. Fashion Practice: The Journal of Design, Creative Process and the Fashion Industry. ISSN 1756-9370 (In Press)

Williamson, James, Martin, Haydn and Jiang, Xiang (2013) A Dispersed Reference Interferometer for Surface and Dimensional Metrology. In: Manufacturing the future conference 2013, 17-18 September 2013, Cranfield University, UK.

Zeng, Shengye, Blunt, Liam and Racasan, Radu (2013) An investigation of the viability of bonnet polishing as a possible method to manufacture hip prostheses with multi-radius femoral heads. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

2012

Adu-Boakye, S., Power, Jess, Wallace, T. and Chen, Z. (2012) Development of a Sizing System for Ghanaian Women For The Production Of Ready-To-Wear Clothing. In: The 88th Textile Institute World Conference 2012, 15th-17th May 2012, Selangor, Malaysia.

Benincasa-Sharman, Caterina Amanda (2012) BBC Stoke Breakfast with Pete Morgan - Caterina Benincasa-Sharman talking about Staffordshire's contribution to the 1951 Festival of Britain in the London based and Travelling Exhibitions. [Audio]

Blunt, Liam, Robbins, David, Leach, Richard, Fleming, Leigh and Elrawemi, Mohamed (2012) Surface defects in water vapour barrier layers for structured plastic electronics. In: Tropical Meeting Structured & Freeform Surfaces, 5th-6th December 2012, National Physical Laboratory, Teddington, UK.

Cai, Huifen, Bu, W. and Xie, H. (2012) Analysis on China's equipment manufacturing security issues based on industrial control. Journal of Central University of Finance & Economics / Zhong Yang Cai Jing Da Xue Xue Bao / 中央財經大學學報 (3). pp. 62-66. ISSN 1000-1549

Chen, Xiaomei, Wolff, Helmut and Koenders, Ludger (2012) Atomic force microscope cantilevers as encoder for real-time displacement measurements. Proceedings of SPIE - SPIE Defense, Security + Sensing, Baltimore, Md., 23-27, April, 2012, USA, 8378 (923005). 83780C-83780C. ISSN 0277786X

Denton, Paul (2012) Succeeding in Tomorrow’s Engineering World of Work: case study. Case Study. National HE STEM Programme, Birmingham.

Denton, Paul, Brown, R. S. A. and Morgan, E. (2012) The Development of a Sustainable Approach to Learner-Employer Engagament. In: National HE STEM Programme Conference, 4-6 September 2012, Birmingham, UK.

Dissanayake, D. G. K. and Sinha, Pammi (2012) Sustainable Waste Management Strategies in the Fashion Industry Sector. International Journal of Environmental, Cultural, Economic and Social Sustainability, 8 (1). pp. 77-90. ISSN 1832-2077

Evans, C. K. and Allen, Claire (2012) Exploring interactive possibilities: the journey so far. [Video] (Unpublished)

Evans, C. K. and Allen, Claire (2012) Undergraduate student research skills for the 21st century: Pedagogical investigation for engaging the millennials beyond surface learning. In: 9th ICED Conference 2012, 23-25 July 2012, Bangkok, Thailand.

Gao, F., Muhamedsalih, Hussam and Jiang, Xiang (2012) In-Process Fast Surface Measurement Using Wavelength Scanning Interferometry. Advanced Materials Research, 622-62. pp. 357-360. ISSN 1662-8985

Gao, F., Muhamedsalih, Hussam and Jiang, Xiang (2012) In-process fast surface measurement using wavelength scanning interferometry. In: 2012 International Conference on Manufacturing and Optimization , September 15-16, 2012, Beijing, China.

Jiang, Xiang and Whitehouse, David J. (2012) Technological shifts in surface metrology. CIRP Annals - Manufacturing Technology, 61 (2). pp. 815-836. ISSN 0007-8506

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2012) An efficient offline method for determining the thermally sensitive points of a machine tool structure. In: 37th International Matador Conference, 25th-27th July 2012, Manchester, England. (Unpublished)

Mohammed, Arif, Folkes, Janet and Chen, Xun (2012) Detection of grinding temperatures using laser irradiation and acoustic emission sensing technique. Materials and Manufacturing Processes, 27 (4). pp. 395-400. ISSN 1042-6914

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2012) Accelerated surface measurement using wavelength scanning interferometer with compensation of environmental noise. Procedia Engineering: 12th CIRP Conference on Computer Aided Tolerancing. ISSN 1877-7058 (In Press)

Pardo, Jorge (2012) Tecoh (Architectural Commission). [Show/Exhibition]

Power, Jess (2012) Sustainable developments in knitting. International Journal of Business and Globalisation, 9 (1). pp. 1-11. ISSN 1753-3627

Swann, David (2012) Self-destruction syringe. GB111222333.

Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2012) Five-Axis Machine Tool Condition Monitoring Using dSPACE Real-Time System. Journal of Physics: Conference Series, 364. 012091. ISSN 1742-6596

2011

Bu, Weil, Qiao, Wen-Junl and Cai, Huifen (2011) An Empirical Study on the Effect of Value-Added Tax Transition on China's Equipment Manufacturing R&D Investment. Journal of Beijing Jiaotong University(Social Sciences Edition (4). pp. 17-20. ISSN 1672-8106

Chen, Xiaomei, Koenders, Ludger and Härtig, Frank (2011) Real-time cross-correlation filtering of a one-dimensional grating position-encoded signal. Measurement Science and Technology, 22 (8). 085105. ISSN 0957-0233

Chen, Xiaomei, Koenders, Ludger, Wolff, Helmut and Härtig, Frank (2011) Tuning-Fork Atomic Force Microscope Cantilever Encoder and Applications for Displacement and In-Plane Rotation Angle Measurement. Procedia Engineering: Proceedings of Eurosensors XXV, September 4-7, 2011, Athens, Greece, 25. pp. 555-558. ISSN 1877-7058

Chen, Xiaomei, Koenders, Ludger, Wolff, Helmut, Neddermeyer, Holger and Haertig, Frank (2011) Atomic force microscope cantilevers as encoders for real-time forward and backward displacement measurements. Measurement Science and Technology, 22 (9). 094017. ISSN 0957-0233

Chen, Xun (2011) Precision abrasive machining technology. In: Precision Abrasive Machining Technology Seminar, 13 January 2011, Heriot-Watt University. (Unpublished)

Evans, C. K. and Allen, Claire (2011) Ryedale. [Video] (Unpublished)

Gao, F., Jiang, Xiang, Muhamedsalih, Hussam and Martin, Haydn (2011) Wavelength scanning interferometry for measuring transparent films of the fusion targets. In: 13th International Conference on Metrology and Properties of Engineering Surfaces 2011, 12th - 15th April 2011, Twickenham, UK.

Hajjaji, Mufeed and Denton, Paul (2011) A Case Study of Risk Management Tools Adoption Within Engineering SMEs. In: Palisade Risk Conference 2011: Risk Analysis, Applications & Training, 29th - 30th March 2011, Amsterdam, Netherlands. (Submitted)

Hajjaji, Mufeed and Denton, Paul (2011) The Integration of Risk Management into Maintenance Project Approaches for SMEs. In: Proceedings of 21st International Conference on Production Research ICPR21 July 31 - August 4, 2011. ICPR, Stuttgart, Germany. ISBN 978-3-8396-0293-5

Jiang, Xiang (2011) In situ real-time measurement for micro-structured surfaces. CIRP Annals - Manufacturing Technology, 60 (1). pp. 563-566. ISSN 0007-8506

Johnson, Anthony and Unver, Ertu (2011) The Conceptual Design of a Kinetic Energy Storage Device to Store 20 KWh of Energy. Research Report. University of Huddersfield Confidential Feasibility Report, Huddersfield, UK. (Unpublished)

Maatgi, Musbah and Denton, Paul (2011) The Role of Work Environment in the Successful Implementation of ISO 9000 in SMEs. In: Fourth Scientific Symposium for Libyan Students in the UK, 15 January 2011, Cardiff, UK. (Unpublished)

Maatgi, Musbah and Denton, Paul (2011) Understanding the Determinants of SME ISO 9000 Success: Towards a Classification of Work Environment. In: Proceedings of 21st International Conference on Production Research ICPR21 July 31 - August 4, 2011. ICPR, Stuttgart, Germany. ISBN 978-3-8396-0293-5

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2011) Efficient thermal error prediction in a machine tool using finite element analysis. Measurement Science and Technology, 22 (8). 085107. ISSN 0957-0233

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2011) Acceleration computing process in wavelength scanning interferometry. In: 10th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2011) , 29th June - 2nd July 2011, Daejeon, S. Korea. (Unpublished)

Muller, Matthias, Barrans, Simon and Blunt, Liam (2011) Predicting Plastic Deformation and Work Hardening during V-Band Formation. Journal of Materials Processing Technology, 211 (4). pp. 627-636. ISSN 0924-0136

Power, Jess, Apeagyei, P.R. and Jefferson, A.M. (2011) Integrating 3D Scanning Data & Textile Parameters into Virtual Clothing. In: Proceedings of the 2nd International Conference on 3D Body Scanning Technologies. Hometrica Consulting, Lugano, Switzerland, pp. 213-224. ISBN 978-3-033-03134-0

Zeng, Shengye, Blunt, Liam and Jiang, Xiang (2011) The application of Taguchi approach to optimise the processing conditions on bonnet polishing of CoCr. Key Engineering Materials, 496. pp. 235-240. ISSN 1013-9826

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

2010

Bashir, Abid and Denton, Paul (2010) The Identification of Enterprise System Limitations within Manufacturing Supply Chains. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 110-115. ISBN 9781862180932

Chen, Xiaomei, Koenders, Ludger, Wolff, Helmut, Haertig, Frank and Schilling, Meinhard (2010) Atomic force microscope cantilever as an encoding sensor for real-time displacement measurement. Measurement Science and Technology, 21 (10). p. 105205. ISSN 0957-0233

Chen, Xiaomei, Wan, Yu, Koenders, Ludger and Schilling, Meinhard (2010) Measurements of dimensional standards and etalons with feature size from tens of micrometres to millimetres by using sensor strengthened nanomeasuring machine. Measurement, 43 (10). pp. 1369-1375. ISSN 02632241

Chen, Xun and Opoz, Tahsin Tecelli (2010) Simulation of Grinding Surface Creation – A Single Grit Approach. Advanced Materials Research, 126-28. pp. 23-28. ISSN 1662-8985

Chen, Xun and Opoz, Tahsin Tecelli (2010) Simulation of Grinding Surface Creation – A Single Grit Approach. In: The 13th International Symposium on Advances in Abrasive Technology (ISAAT 2010), 19-22 September 2010, Taipei, Taiwan.

Denton, Paul, Hajjaji, Mufeed and Bashir, Abid (2010) Internal Supply Chain Management within SMEs: When ERPII Is Not Enough? In: The 4th International Conference on Operations and Supply Chain Management, 25-31 July 2010, Hong Kong and Guangzhou, China.

Evans, C.K. (2010) Case Study: The Fashion Archive at the University of Huddersfield. In: Look-here! Project User Needs and Pedagogy Workshop, October 2010, JISC Offices, London. (Unpublished)

Gao, F., Jiang, Xiang, Muhamedsalih, Hussam and Martin, Haydn (2010) Wavelength Scanning Interferometry for Thin Film Analysis of Fusion Target. In: 3rd European Target Fabrication Workshop, 30 September-1 October, Oxford. (Unpublished)

Hajjaji, Mufeed, Denton, Paul and Jackson, Steve (2010) The effectiveness of using project management tools and techniques for delivering projects. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 124-129. ISBN 9781862180932

Jiang, Xiang (2010) Robust solution for the evaluation of stratified functional surfaces. CIRP Annals - Manufacturing Technology, 59 (1). pp. 573-576. ISSN 0007-8506

Jiang, Xiang, Gao, F. and Mateboer, A. (2010) An approach of assessment for ultra-precision V-groove structured surfaces. In: Proceedings of the euspen International Conference – Delft - June 2010. European Society for Precision Engineering & Nanotechnology, Delft, Netherlands.

Jiang, Xiang, Gao, F. and Wang, Kaiwei (2010) Wavelength Scanning Interferometer for Structured Surfaces. In: ASPE Summer Topical Meeting on Precision Interferometric Metrology, 23rd - 25th June 2010, Asheville, North Carolina, USA.

Kooli, Kaouther, Wright, Len Tiu and Wright, Adrian (2010) Business implications in the subcontracting alliance life cycle: case examples from the Tunisian clothing and textile industries. Journal of Business & Industrial Marketing, 25 (5). pp. 372-382. ISSN 0885-8624

Power, Jess (2010) Anthropometric Practices & the complete Garment. In: Proceedings of Textiles: A Global Vision: The Textile Institute Centenary Conference. The Textile Institute, Manchester, UK. ISBN 9780956641915

Power, Jess (2010) Devising a product development curriculum to promote industry ready apparel graduates. In: Proceedings of Textiles: A Global Vision: The Textile Institute Centenary Conference. The Textile Institute, Manchester, UK. ISBN 9780956641915

Power, Jess (2010) Examination of issues affecting the teaching and learning of large cohorts within practical-based subjects. International Journal of Fashion Design, Technology and Education, 3 (2). pp. 55-66. ISSN 1754-3266

Qi, Qunfen, Jiang, Xiangqian, Liu, Xiaojun and Scott, Paul J. (2010) An unambiguous expression method of the surface texture. Measurement, 43 (10). pp. 1398-1403. ISSN 0263-2241

Sinha, Pammi, Dissanayake, D., G., Kanchana, Mahwera, Danford and Kahabi, Charles (2010) Creating a global vision for sustainable fashion. In: 87th Textile Institute World Conference 2010. Textiles: A Global Vision - Textiles Institute Centenary World Conference , 1 . Textiles Institute, Manchester, UK, pp. 247-275. ISBN 978-1-61782-270-4

Sinha, Pammi and Shah, Rohit (2010) Creating a global vision for sustainable textiles. In: "Textiles: A Global Vision" the Textiles Institute Centenary World Conference, 3-4 November 2010, Manchester, UK.

Yeung, Ka Yiu and Chen, Xun (2010) 3-D Fixture Layout Design System Based on Genetic Algorithm. Proceedings of the 16th International conference on Automation & Computing. pp. 238-243. ISSN 9780955529368

2009

Chen, Xun (2009) Corrective Abrasive Polishing Processes for Freeform Surface. Key Engineering Materials, 404. pp. 103-112. ISSN 1013-9826

Chen, Xun (2009) Fundamental Study of Corrective Abrasive Machining Technology. In: CIRP UK Meeting , 8th May 2009. (Unpublished)

Gao, F., Wang, Kaiwei and Jiang, Xiang (2009) A high speed scanning heterodyne interferometer for in process surface measurement. In: Proceedings of the euspen International Conference – San Sebastian - June 2009. European Society for Precision Engineering & Nanotechnology, San Sebastian, Spain. ISBN 13:978-0-9553082-6-0

Griffin, James Marcus and Chen, Xun (2009) Characteristics of the acoustic emission during horizontal single grit scratch tests: Part 2 classification and grinding tests. International Journal of Abrasive Technology, 2 (1). pp. 43-59. ISSN 1752-2641

Hussey, Clare, Sinha, Pammi and Kelday, Fiona (2009) Responsible Design: Re-using/Recycling of Clothing. In: Design Connexity: 8th European Academy of Design Conference, 1-3 April, 2009, Aberdeen, Scotland.

Kus, Abdil, Unver, Ertu and Taylor, Andrew (2009) A comparative study of 3D scanning in engineering, product and transport design and fashion design education. Computer Applications in Engineering Education, 17 (3). pp. 263-271. ISSN 1061-3773

Li, T., Leach, Richard K., Jung, L, Jiang, Xiang and Blunt, Liam (2009) Comparison of Type F2 Software Measurement Standards for Surface Texture. Technical Report. National Physical Laboratory, UK, London, UK.

O'Brien, Mark, Sun, Qian and Zhoui, Fang (2009) Consultants, Clients and Chinese context: Managing Brands in China. In: D2B2: the 2nd Tsinghua International Design Management Symposium, 23-26 April 2009, Tsinghua University , Beijing , China.

Sinha, Pammi, Dissanayake, D. G. K., Hussey, Clare, J. and Bartlett, Caroline (2009) Recycled Fashion. In: Taking up the Global Challenge: 15th Annual International Sustainable Sustainable Development Research Conference, 5-9 July, 2009, Utrecht University, the Nethelands. (Unpublished)

Sun, Qian, Sridhar, Naren and O'Brien, Mark (2009) Consumer Perception Of Product Stimuli: An Investigation into Indian Consumer Psychology and its Implications for New Product Development, Process and Strategy. In: D2B2: the 2nd Tsinghua International Design Management Symposium, 23-26 April 2009, Tsinghua University , Beijing , China.

Ward, Lisa J. and Gaffikin, Jane A. (2009) Student Placement Journeys - An On-line collection of video resources showcasing the development of students on one year work placements with the views from their employers and placement tutors. In: 18th World Conference for Co-operative Education, 'An International Dialogue in Vancouver', July, 2009, Vancouver, Canada. (Unpublished)

Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2009) A Generalised Linear and Nonlinear Spline filter. In: 12th International Conference on Metrology and Properties of Engineering Surfaces, 8-10 July 2009, Rzeszów, Poland. (Submitted)

Zeng, Wenhan, Jiang, Xiang, Scott, Paul J., Xiao, Shaojun and Blunt, Liam (2009) A Fast Algorithm for the High Order Linear and Nonlinear Gaussian Regression filter. In: Proceedings of the 9 th international conference of the european society for precision engineering and nanotechnology. euspen, San Sebastian, Spain, pp. 356-359. ISBN 978-0-9553082-6-0

2008

Lu, Wenlong, Jiang, Xiang, Liu, X.J. and Xu, Zhijie (2008) Compliance uncertainty of diameter characteristic in the next-generation geometrical product specifications and verification. Measurement Science and Technology, 19 (10). pp. 105103-1. ISSN 0957-0233

Needham, Paul M. (2008) Design for manufacture: a methodology to evaluate an aircraft design in order to ensure its manufacturability. Doctoral thesis, University of Huddersfield.

Peng, H.P., Jiang, Xiang, Xu, Zhijie and Liu, X.J. (2008) Optimal tolerance design for products with correlated characteristics by considering the present worth of quality loss. International Journal of Advanced Manufacturing Technology, 39 (1-2). pp. 1-8. ISSN 0268-3768

Power, Jess (2008) Developments in apparel knitting technology. In: Advances in Apparel Production. Woodhead Publishing, London, UK. ISBN 978 1 84569 295 7

Power, Jess (2008) Measuring up. Knitting International, 114 (1360). pp. 40-41. ISSN 0266-8394

Power, Jess (2008) Shaping progress. Knitting International, 114 (1358). pp. 34-35. ISSN 0266-8394

Power, Jess (2008) Size matters. Knitting International, 114 (1359). pp. 34-35. ISSN 0266-8394

Power, Jess and Oteino, R. (2008) Investigating the Relationship Between Anthropometrical Data and Fully Shaped Knitted Garments in UK Manufacturing. In: Proceedings of the 86th Textile Institute World Conference. The Textile Institute, Hong Kong, China. ISBN 1870372700

Sinha, Pammi, Cockroft, Laurence and Carr, Chris (2008) Design Education in Tanzania; Design Skills & Marketing Capabilities for a Developing Economy. In: Creative Clusters Conference: the creative Economy in Smaller Nations, 16th - 19th November 2008, Glasgow, Scotland . (Unpublished)

2007

Denton, Paul, Little, David, Weston, R.H and Guerrero, A. (2007) An enterprise engineering approach for supply chain systems design and implementation. International Journal of Services and Operations Management, 3 (2). pp. 131-151. ISSN 1744-2370

Jiang, Xiang (2007) The economic management of geometrical products variability: the next generation GPS. In: 4th International CIRP-Sponsored Conference (DET2007) on Digital Enterprise Technology, 19-21 September 2007, University of Bath, UK. (Unpublished)

Kuma-Kpobee, Mercy, Power, Jess and Otieno, R. (2007) Utilisation of Traditional Dress: The Case of the Slit and Kaba in Ghana. In: Proceedings of ARS Textrina: International Textiles Conference. Textile Territories: Past, Present and Future . University of Leeds, Ulster, Belfast,Northern Ireland, pp. 83-87.

Marshall, Justin, Unver, Ertu and Atkinson, Paul (2007) AutoMAKE: Generative systems, digital manufacture and craft production. In: Generative Art Conference, 11th -14th December 2007, Milan, Italy.

O'Brien, Mark (2007) [Editorial]. Design Management Journal, 3 (1). ISSN 1557-0614

Peng, H., Liu, X., Jiang, Xiang and Wang, Y. (2007) Concurrent tolerance design based on a comprehensive model of manufacturing cost-quality loss. In: 10th International Conference on Computer Aided Tolerancing, 21st-23rd March, 2007, Erlangen, Germany. (Unpublished)

Power, Jess (2007) Functional to fashionable: knitwear's evolution throughout the last century and into the millennium. Journal of Textile and Apparel Technology and Management, 5 (4). pp. 1-16.

Power, Jess (2007) Study of anthropometrical data in knitted garments. In: Proceedings of the 85th Textile Institute World Conference. The Complete Set of World Conference Proceedings . The Textile Institute, Colombo, Sri Lanka.

Power, Jess (2007) An examination into textile education by active research. In: Proceedings of the 85th Textile Institute World Conference. The Complete Set of World Conference Proceedings . The Textile Institute, Colombo, Sri Lanka.

Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2007) Exploration of a Category Theory-Based Object-Oriented Database for Surface Texture Information Management. In: Proceedings of the First International Symposium on Data, Privacy, and E-Commerce November 1-3, 2007. IEEE Computer Society, London, UK, pp. 107-109. ISBN 978-0-7695-3016-1

Xu, Yuanping, Xu, Zhijie and Jiang, Xiang (2007) Machining surface texture knowledge management using a category theory-based object-oriented database. Communications of SIWN (formerly: System and Information Sciences Notes), 1 (1). pp. 83-88. ISSN 1757-4439

2006

Brierley, J.A., Cowton, Christopher J. and Drury, Colin (2006) The application of costs in make-or-buy decisions: an analysis. International Journal of Management, 23. pp. 794-800. ISSN 0813-0183

Griffin, James Marcus and Chen, Xun (2006) Classification of varying levels of ploughing, rubbing and cutting during Single Grit tests using Evolutionary Inspired Computer Techniques. In: 4th International Conference on Manufacturing Research (ICMR 2006), 5th-7th September 2006, Liverpool John Moores University, Liverpool. (Submitted)

Jiang, Xiang, Wang, Kaiwei and Martin, Haydn (2006) Near common-path optical fibre interferometer for potentially fast on-line micro/nano scale surface measurement. Optical Letters, 31. pp. 3603-3605. ISSN 0146-9592

Liu, Qiang, Chen, Xun and Gindy, Nabil (2006) Investigation of acoustic emission signals under a simulative environment of grinding burn. International Journal of Machine Tools and Manufacture, 46 (3-4). pp. 284-292. ISSN 08906955

Lu, R.S. and Tian, Gui Yun (2006) On-line measurement of surface roughness by laser light scattering. Measurement Science and Technology, 17. pp. 1496-1502. ISSN 0957-0233

Needham, Paul M. (2006) Design for Six Sigma, its Potential Effect on Weight in Modern Military Aircraft. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Su, Z., Tian, Gui Yun and Gao, C. (2006) A machine vision system for on-line removal of contaminants in wool. Mechatronics, 16 (5). pp. 243-247. ISSN 0957-4158

2005

Dean, Lionel Theodore, Atkinson, Paul and Unver, Ertu (2005) Evolving individualised consumer products. In: 6th International Conference of the European Academy of Design, 29-31 March 2005, University of the Arts, Bremen.

Denton, Paul (2005) Business Strategy Driven Information Technology Systems. In: Proceedings of the 18th ICPR: The Networked Enterprise, July 31-August 4 2005, Fisciano, Italy.

Denton, Paul (2005) An Enterprise Engineering Approach for Supply Chain Systems Design and Implementation. In: Proceedings of SCMIS2005: 3rd International Workshop on Supply Chain Management and Information Systems, 6th - 8th July 2005, Thessaloniki, Greece.

Hua, Chen, Yan, Cao, Rujia, Zhao and Lu, Joan (2005) Product design scheme decision-making system based on CBR coupled with ANN. Proceedings of the Ninth International Conference on Computer Supported Cooperative Work in Design, 2005, 2. pp. 856-860. ISSN ISBN: 1-84600-002-5

Li, Z. and Jiang, Xiang (2005) An international strategy for China's manufacturing industry and technical standards. In: International Manufacturing Leaders Forum (IMLF 2005), 28th Feb-2nd March 2005, Glenelg Beach, Adelaide, South Australia. (Unpublished)

Little, David and McKinna, A. (2005) A lean manufacturing assessment tool for use in SMEs. In: Proceedings of the Seventh SMESME International Conference : Stimulating Manufacturing Excellence in Small & Medium Enterprises: 12-15 June 2005 University of Strathclyde, Glasgow, UK. University of Strathclyde, Scottish School of Further Education. ISBN 0947649379

Liu, Qiang, Chen, Xun and Gindy, Nabil (2005) Fuzzy pattern recognition of AE signals for grinding burn. International Journal of Machine Tools and Manufacture, 45 (7-8). pp. 811-818. ISSN 08906955

Ma, L.M., Jiang, Xiang, Xu, Z. and Li, Z. (2005) An investigation on the technical standard strategy for China's manufacturing industry. Journal of Physics: conference series, 13. pp. 389-393. ISSN 1742-6596

Miller, Martin, Hall, David and Little, David (2005) Pathways to success in SMEs. In: Proceedings of the Seventh SMESME International Conference on Stimulating Manufacturing Excellence in Small & Medium Enterprises. Centre for Strategic Manufacturing Design, Manufacture & Engineering Management, University of Strathclyde, Glasgow, pp. 208-215. ISBN 0 947649 37 9

O'Brien, Mark (2005) Entente Cordiale: developing design alliances. In: Crossing Design Boundaries: Proceedings of the 3rd Engineering & Product Design Education International Conference, 15-16 September 2005, Edinburgh, UK. Routledge, pp. 207-212. ISBN 978-0-415-39118-4

Power, Jess (2005) Are we equipped for wearables? Textile Asia, XXXVI (11). pp. 74-78. ISSN 0049-3554

Power, Jess (2005) Are we equipped for wearables? In: Proceedings of the 84th Textile Institute World Conference. TIWC 2005 . The Textile Institute, Releigh, North Carolina, USA. ISBN 1870372670

2004

Adesta, Erry Yulian Triblas, Kelly, P.F. and Little, David (2004) A reference model for extended enterprise. In: 3rd International Conference on Advanced Manufacturing Technology (ICAMT 2004), 11 - 13 May 2004, Pan Pacific Hotel, Kuala Lumpur. (Unpublished)

Blunt, Liam, Jiang, Xiang, Xiao, Shaojun and Scott, Paul J. (2004) The use of interferometry and image analysis techniques for metrology of MST devices. In: 8th International Symposium on Measurement and Quality Control in Production, 12th-15th October, 2004, Erlangen, Germany. (Unpublished)

Denton, Paul and Short, C. (2004) Rapid Product Development Evaluation Report. Project Report. Intelligent Manufacturing Systems Consortium.

Hands, D. and O'Brien, Mark (2004) Asia - Link: Sino European Design Management Curriculum Development. In: International Engineering and Product Design Education Conference Proceedings: the 2nd International Engineering and Product Design Education Conference, Delft, The Netherlands , 2-3 September 2004. NVIO. ISBN 90-5155-020-0

Jiang, Xiang (2004) Recent advances in micro-manufacturing and micro-system. In: The 6th International Conference on Frontiers of Design and Manufacturing, 20th-24th June, 2004, Xi'an, China. (Unpublished)

Liu, X.-W., Cheng, K., Longstaff, Andrew P., Widiyarto, H.M. and Ford, Derek G. (2004) Improved dynamic cutting force model in ball-end milling. Part I: theoretical modelling and experimental calibration. International Journal of Advanced Manufacturing Technology, 26 (5-6). pp. 457-465. ISSN 0268-3768

Nabieva, I, Chazanova, M, Ergašev, K. and Pearson, J. S. (2004) Preparation for the dyeing of blended yarns made from cotton and PAN fibres. International Textile Bulletin, 50 (1). pp. 64-65. ISSN 1029-8525

Pearson, J. S. and Squires, P. L. (2004) The Changing Face of the UK Textiles: How Should Education Respond? In: 83rd World Conference of the Textile Institute, 23-27 May 2004, ShanghaiMart, Shanghai, China.

Power, Jess (2004) Knitting shells in the third dimension. Journal of Textile and Apparel Technology and Management, 3 (4). pp. 1-13.

Tian, G.Y., Sophian, Ali, Taylor, D. and Rudlin, J. (2004) Pulsed eddy current system for dynamic inspection of defects. Insight, 46 (5). pp. 256-259. ISSN 1354-2575

2003

Atkinson, Paul and Dean, Lionel Theodore (2003) 'Future factories': teaching techné. In: 5th European Academy of Design Conference, April 2003, Universitat de Barcelona, Spain.

Barrans, Simon and Bhat, N. (2003) Design of flat bed aerostatic bearings with the aid of finite element analysis. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 361-370. ISBN 9781853129902

Barrans, Simon, Ghurbal, E.M. and Freeman, R. (2003) Design optimization of the head of a high precision polishing machine. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 325-334. ISBN 9781853129902

Chen, Xun and Feng, Zhengming (2003) Effectiveness of Laser Cleaning for Grinding Wheel Loading. Key Engineering Materials, 238-39. pp. 289-294. ISSN 1013-9826

Elbadawi, A. M. and Pearson, J. S. (2003) Foam Technology in Textile Finishing: A critical appreciation of recent developments. Textile Progress, 33 (4). ALL. ISSN 0040-5167

Fletcher, Simon and Ford, Derek G. (2003) Measuring and modelling heat transfer and thermal errors on a ballscrew feed drive system. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 349-360. ISBN 9781853129902

Hurreeram, Dinesh Kumar (2003) Development of a manufacturing strategy for apparel manufacture in Mauritius using a systems modelling approach. Doctoral thesis, University of Huddersfield.

Liu, X. and Gao, F. (2003) A novel multi-function tribological probe microscope for mapping surface properties. Measurement Science and Technology, 15 (1). pp. 91-102. ISSN 0957-0233

Mavromihales, Mike, Mason, J. and Weston, Bill (2003) A case of reverse engineering for the manufacture of wide chord fan blades (WCFB) used in Rolls Royce aero engines. Journal of Materials Processing Technology, 134 (3). pp. 279-286. ISSN 0924-0136

Miller, M.R., Hall, David and Little, David (2003) The definition of success within Yorkshire manufacturing SMEs. In: Sixth SMESME International Conference, 1-4 June 2003, Athens, Greece. (Unpublished)

Moscovitch, Tim (2003) The Consumer Design Agenda? In: 5th European Academy of Design Conference, April 2003, Universitat de Barcelona, Spain.

Pearson, J. S. and Mullen, E. (2003) Sunlight, skin cancer and children's clothing. Textiles Magazine, 30 (4). pp. 23-27. ISSN 1367-1308

Pislaru, Crinela, Freeman, J.M. and Ford, Derek G. (2003) Modal parameter identification for CNC machine tools using wavelet transform. International Journal of Machine Tools and Manufacture, 43 (10). pp. 987-993. ISSN 0890-6955

Power, Jess and Dias, T. (2003) Knitting of electroconductive yarns. In: IEE Eurowearable '03. Conference Proceedings, 2003 . IEEE, pp. 55-60. ISBN 0-85296-282-7

Rollins, Ralph (2003) Modelling the changing apparel supply chain. International Journal of Clothing Science and Technology, 15 (2). pp. 140-156. ISSN 0955-6222

Rollins, Ralph, Little, David and Porter, J.K. (2003) Modelling the changing apparel supply chain. International Journal of Clothing Science and Technology, 15 (2). pp. 140-156. ISSN 0955-6222

Sadriddinov, B., Khamraev, N., Ergašev, K. and Pearson, J. S. (2003) Dyeing of fabrics made of cotton/acrylic fiber blends with reactive dyes. Melliand International, 9 (4). pp. 336-337. ISSN 0947-9163

Xu, Q., Cunningham, J. and Ford, Derek G. (2003) The improvement of geometric accuracy of FMS machine through retrofitting and compensation. International Journal for Manufacturing Science and Production, 5 (1/2). pp. 67-72. ISSN 0793-6648

2002

Adesta, Erry Yulian Triblas (2002) A reference model for extended extended enterprise. Doctoral thesis, University of Huddersfield.

Cao, Hang, Chen, Xiaomei, Grattan, K.T.V. and Sun, Yujiu (2002) Automatic micro dimension measurement using image processing methods. Measurement, 31 (2). pp. 71-76. ISSN 02632241

Chen, Xun (2002) The sharpness of grinding wheels: an important measure of grinding behaviour. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216 (5). pp. 829-832. ISSN 0954-4054

Cunningham, J., Xu, Q. and Ford, Derek G. (2002) A case study on practical error correction practices utilised on a CNC machine tool. In: Advances in Manufacturing Technology XVI. Wiley, pp. 361-366. ISBN 9781860583780

Denton, Paul (2002) Business Strategy Driven IT Systems For Engineer-To-Order and Make-To-Order Manufacturing Enterprises. Doctoral thesis, Loughborough University.

Elbadawi, A. M. and Pearson, J. S. (2002) Multi Factorial Analysis of Foam Properties. International Dyer, 187 (2). p. 28. ISSN 0020-658X

Gosal, Hardip, Pearson, J. S. and Squires, P. L. (2002) The role of and design graduate employment research in informing curriculum development and review. In: Enhancing curricula: Exploring Effective Curricula Practices in Art, Design and Communication, 10-12 April 2002, Royal Institute of Architects, London.

Jiang, Xiang, Blunt, Liam and Scott, Paul J. (2002) Fundamental research into the filtration of surface texture in geometric product specification and verification. In: 3rd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering - ICME 2002, 3rd-5th July 2002, Ischia, Italy. (Unpublished)

Liu, X., Bell, T., Gao, F. and Chetwynd, D. G. (2002) Characterisation of engineered surfaces by a multi-function tribological probe microscope. In: EUSPEN International Conference 2002. EUSPEN, pp. 719-722.

Power, Jess, Dias, T. and Cooke, W.D. (2002) A study of flat-bed knitting technology for three-dimensional preforms. In: Conference Proceedings: World Congress: Knitting for the 21st Century. UMIST, UMIST Conference Centre, Manchester, UK, pp. 189-199.

Tian, Gui Yun, Yin, G.F. and Taylor, D. (2002) Internet-based manufacturing: A review and a new infrastructure for distributed intelligent manufacturing. Journal of Intelligent Manufacturing, 13 (5). pp. 323-338. ISSN 0956-5515

Xu, Q., Cunningham, J. and Ford, Derek G. (2002) The improvement of geometric accuracy of FMS machine through retrofitting and compensation. In: Advances in Manufacturing Technology XVI: Proceedings of the Eighteenth National Conference on Manufacturing Research, Leeds Metropolitan University, UK, 10-12 September 2002. John Wiley and Sons, pp. 441-448. ISBN 9781860583780

Xu, Q. and Ford, Derek G. (2002) Analytical and FE Identification of lowest natural frequency of a ball-screw drive in beaver machine. In: Advances in Manufacturing Technology XVI: Proceedings of the Eighteenth National Conference on Manufacturing Research, Leeds Metropolitan University, UK, 10-12 September 2002. John Wiley and Sons, pp. 247-251. ISBN 9781860583780

Xu, Zhijie (2002) A novel virtual environment construction approach for manufacturing simulations. European Journal of Mechanical Engineering, Winter 2002. pp. 203-208. ISSN 1371-6980

Yin, G.F., Tian, Gui Yun and Taylor, D. (2002) A web-based remote cooperative design for spatial cam mechanisms. International Journal of Advanced Manufacturing Technology, 20 (8). pp. 557-563. ISSN 0268-3768

Yusuf, Yahaya Y., Little, David and Onuh, O. (2002) Multiple case studies of total enterprise integration programmes: lessons and benefits. International Journal of Manufacturing Technology and Management, 4 (3/4). pp. 283-302. ISSN 1368-2148

2001

Burrows, J., Griffiths, B. and Scott, Paul J. (2001) The use of vectors for defining the three-dimensional texture and asymmetric directionality of turned specimens. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215 (2). pp. 125-134. ISSN 0954-4054

Elbadawi, A. M. and Pearson, J. S. (2001) Crease-resist finish: What effect does the application process have? International Textile Bulletin, 47 (1). pp. 62-67. ISSN 1029-8525

Hall, David, Herr, G.H., McKinna, A. and Linde, H.J. (2001) Measuring innovation for agile manufacturing: insights and clarifications for management. International Society for Agile Manufacturing, 4 (1). pp. 85-95.

Little, David, Porter, J.K., Peck, M. and Rollins, Ralph (2001) Responsive manufacturing demands alignment of production control methods to business drivers. Journal of Integrated Manufacturing Systems, 12 (3). pp. 170-178. ISSN 0957-6061

2000

Gill, Harry and Unver, Ertu (2000) Innovation, design and CAE in new product development. In: Integrating design education beyond 2000: proceedings of the 22nd SEED Annual Design Conference and 7th National Conference on Product Design Education, 6-7 September 2000, University of Sussex, Brighton, UK. John Wiley and Sons Ltd, Brighton, UK. ISBN 9781860582653

Horrocks, A. R., Wang, M.Y., Hall, M. E., Sunmonu, Femi and Pearson, J. S. (2000) Flame retardant textile back-coatings. Part 2. Effectiveness of phosphorus-containing flame retardants in textile back-coating formulations. Polymer International, 49 (10). pp. 1079-1091. ISSN 09598103

Pearson, J. S., Shearer, A. J. and Squires, P. L. (2000) UK textile design education. Textiles Magazine, 29 (3). pp. 24-27. ISSN 1367-1308

Riddalls, C.E., Bennett, S and Tipi, Nicoleta S. (2000) The optimal control of production-inventory systems. In: 10th International conference on Flexible automation and intelligent manufacturing. Econo Printing, pp. 649-658. ISBN 9780970105301

Tipi, Nicoleta S., Bennett, S and Riddalls, C.E. (2000) Feedback control techniques for a manufacturing system. In: 10th International conference on Flexible automation and intelligent manufacturing. Econo Printing, pp. 95-104. ISBN 9780970105301

Wang, M.Y., Horrocks, A. R., Horrocks, S., Hall, M. E., Pearson, J. S. and Clegg, S. (2000) Flame Retardant Textile Back-Coatings. Part 1: Antimony-Halogen System Interactions and the Effect of Replacement by Phosphorus-Containing Agents. Journal of Fire Sciences, 18 (4). pp. 265-294. ISSN 07349041

1999

Denton, Paul and Hodgson, A. (1999) Can SMEs Afford MRP? In: ICPR-15 Manufacturing for a global market. Dept. of Manufacturing and Operations Engineering, University of Limerick, Limerick, Ireland, pp. 735-738. ISBN 9781874653561

Denton, Paul, Hodgson, A. and Hreczuk-Hirst, I. A. (1999) Implementing Intranet Support for BPR in a Small Manufacturing Company. In: ICPR-15 Manufacturing for a global market. Dept. of Manufacturing and Operations Engineering, University of Limerick, Limerick, Ireland, pp. 739-742. ISBN 9781874653561

Ford, Derek G., Longstaff, Andrew P., Freeman, J.M. and Postlethwaite, S. R. (1999) Practical calibration of tracking laser systems. In: 4th International Conference on Laser Metroogy and Machine Performance, 13 to 15 July 1999, Longhirst Hall, Northumberland.

Porter, Keith, Little, David, Peck, Matthew and Rollins, Ralph (1999) Manufacturing classifications: relationships with production control systems. Integrated manufacturing systems, 10 (4). pp. 189-199. ISSN 0957-6061

Tipi, Nicoleta S. and Bennett, S (1999) Dispatching rules for scheduling and feedback control in a virtual enterprise - a simulation. International Journal of Flexible Automation and Integrated Manufacturing, 7 (3-4). pp. 293-304. ISSN 1064-6345

1998

Hardaker, Glenn (1998) An integrated approach towards product innovation in international manufacturing organisations. European Journal of Innovation Management, 1 (2). pp. 67-73. ISSN 14601060

Hardaker, Glenn and Ahmed, Pervaiz K. (1998) International approaches to computer-integrated manufacturing: perspectives from Europe, America and Japan. In: The strategy and organization of international business. The academy of international business series . St. Martin's Press, New York, pp. 177-194. ISBN 0333674693

Hardaker, Glenn, Ahmed, Pervaiz K. and Graham, Gary (1998) An integrated response towards the pursuit of fast time to market of NPD in European manufacturing organisations. European Business Review, 98 (3). pp. 172-177. ISSN 0955534X

Harness, David R., Marr, Norman E. and Goy, Tina (1998) The identification of weak products revisited. Journal of product and brand management, 7 (4). pp. 319-335. ISSN 1061-0421

Koc, Erdem and Unver, Ertu (1998) Part Program Optimisation in CNC Turning Operation. Pamukkale University Journal of Engineering Sciences, 4 (1-2). pp. 655-661.

Yusuf, Yahaya Y. and Little, David (1998) An empirical investigation of enterprise-wide integration of MRPII. International Journal of Operations & Production Management, 18 (1). pp. 66-86. ISSN 0144-3577

1997

Chen, Xiaomei, Ren, Dongmei and Li, Zhijun (1997) Surface Roughness interferogram processing system. Metrology & Measurement Technology, 17 (3). pp. 7-10. ISSN 1002-6061

Prendergast, G.P. and Marr, Norman E. (1997) Generic products: who buys them and how do they perform relative to each other? European journal of marketing, 31 (2). pp. 94-109. ISSN 0309-0566

Unver, Ertu (1997) Design, Development and Manufacturing of A Game Machine Security Device. [Artefact] (Unpublished)

1996

Porter, J.K., Jarvis, Peter, Little, David, Laakman, J., Hannen, C. and Schotten, M. (1996) Production planning and control system developments in Germany. International Journal of Operations & Production Management, 16 (1). pp. 27-39. ISSN 0144-3577

1995

Hardaker, Glenn and Ahmed, Pervaiz K. (1995) International approaches to computer-integrated manufacturing perspectives from Europe and Japan. European Business Review, 95 (2). pp. 28-39. ISSN 0955534X

Macbeth, P.A. (1995) Major Fabric Design Collection for Habitat UK. [Artefact]

1994

Chen, Xiaomei (1994) Threshold Optimization of interference image of surface roughness measuring interferometer. Acta Optica Sinica, 14 (11). pp. 1183-1186. ISSN 0253-2239

1993

Chen, Xiaomei and Long, Zuhong (1993) Automatic processing of interferogram from surface roughness measuring interferometer. Acta Optica Sinica, 13 (11). pp. 1040-1044. ISSN 0253-2239

Unver, Ertu and Koc, Erdem (1993) Development of a DYNA CNC simulation software and part program transfer into a CNC lathe. In: 6th Machine Theory Conference, 1993, Trabzon, Turkey.

1990

Unver, Ertu and Koc, Erdem (1990) Conversion of a conventional lathe into a computer control machine using AC motors. In: 4th Machine Design and Manufacturing Congress, 1990, METU, Turkey.

1987

Gao, F., Wang, B. and Zhuang, B. (1987) A Projection Photoelectric 2D Positioning System. In: National Symposium of Opto-Electronic technology, 1987, Jilin, China.

Smithurst, Peter (1987) The Cutlery Industry. Shire Albums . Shire Publications. ISBN 978-0852638705

This list was generated on Thu Oct 23 16:18:06 2014 IST.

University of Huddersfield, Queensgate, Huddersfield, HD1 3DH Copyright and Disclaimer All rights reserved ©