Items where School is "Computing and Engineering Annual Researchers' Conference (CEARC)"

2013

Abdalla, Gaballa, Ball, Andrew and Gu, Fengshou (2013) Fault Detection and Diagnosis of Ball Bearing Using Advanced Vibration Analysis Techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 224. ISBN 9781862181212

Abdullah, Fazil, Ward, Rupert, Catterall, Stephen, Hill, Pat and Wilson, David (2013) An investigation of the factors that influence engagement with CPD within e-portfolios used for accredited Higher Education course. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 80-86. ISBN 9781862181212

Abdusamad, Ayad (2013) Mapping Extensible Mark-up Language (XML) Documents into Rational DataBase Management System (RDBMS) for Condition Monitoring (CM). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 225. ISBN 9781862181212

Abuaniza, Ayman, Fletcher, Simon and Longstaff, Andrew P. (2013) Thermal error modelling of a three axes vertical milling machine using Finite element analysis (FEA). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 87-92. ISBN 9781862181212

Aburass, Ali, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) Combustion Diagnostics of a Diesel Engine with Biodiesel Fuels based on Vibro-acoustics and In-Cylinder Pressure Measurements. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 13-18. ISBN 9781862181212

Ahmaida, Anwar, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) Fatigue Prediction of a Gear Transmission System based on Vibro-Acoustic Measurements. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 93-99. ISBN 9781862181212

Al-Nedawe, Basman, Buhafa, Adel M, Sibley, Martin J.N. and Mather, Peter (2013) Optimum reed solomon code using with dicode pulse position modulation system. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 25-30. ISBN 9781862181212

Alghadhi, Mosttafa, Ball, Andrew, Gu, Fengshou and Cattley, Robert (2013) Standard drive cycle recreation from general driving behaviour. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 100-105. ISBN 9781862181212

Ali, Maythem and Lucas, Gary (2013) Optimisation of an Analogue Signal Conditioning Circuit for a Novel Imaging Electromagnetic Flow meter. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 227. ISBN 9781862181212

Alzarok, Hamza, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) Assessment of the positioning accuracy of a small articulated robot during machining operations. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 106-111. ISBN 9781862181212

Amsdon, Timothy and Sibley, Martin J.N. (2013) Theoretical concepts and matlab modelling of VLC based MIMO systems. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 112-117. ISBN 9781862181212

Baqqar, Mabrouka, Tran, Van Tung, Gu, Fengshou and Ball, Andrew (2013) Comparison between adaptive neuro-fuzzy inference system and general regression neural networks for gearbox fault detection using motor operating parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 118-126. ISBN 9781862181212

Buhafa, Adel M, Al-Nedawe, Basman, Sibley, Martin J.N. and Mather, Peter (2013) MATLAB Simulation for DiPPM over Diffuse Optical Wireless Communications. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 127-132. ISBN 9781862181212

Chrysikos, Alexandros (2013) Improving Student Retention in UK Higher Education Institutions; The potential of using Knowledge as a Service (KaaS). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 61-66. ISBN 9781862181212

Ding, Hao, Scott, Paul J. and Jiang, Xiang (2013) Inverse problems of measurement with application on specification of surface profile. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 229. ISBN 9781862181212

Elrawemi, Mohamed, Blunt, Liam and Fleming, Leigh (2013) Process Practice and its Effects on Surface Defects on Flexible PV Barrier Films. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 49-54. ISBN 9781862181212

Feng, Guojin, Zhen, Dong, Aliwan, M., Gu, Fengshou and Ball, Andrew (2013) Investigation of Wireless Protocols for Remote Condition Monitoring. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 19-24. ISBN 9781862181212

Feradyan, Anthony and Holmes, Violeta (2013) Autonomous embedded fuzzy logic based wireless sensor network for indoor energy management. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 133-139. ISBN 9781862181212

Freegah, Basim, Asim, Taimoor and Mishra, Rakesh (2013) Effects of condenser volume on the performance of a solar thermo-syphon. In: Annual Researchers' ConferenceComputing & Engineering 2013 (CEARC'13), December 2013, University of Huddersfield, Huddersfield, UK.

Hamed, M., Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2013) A study of the influence of vehicle tyre pressure on suspension system response using a full car model. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 7-12. ISBN 9781862181212

Hamomd, Osama, Ball, Andrew, Gu, Fengshou and Thobiani, F. (2013) Pump Rotor System Monitoring Based on Advanced Measurements and Analysis Techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 230. ISBN 9781862181212

Hanif, Imran, Hinks, J. A. and Donnelly, S. E. (2013) Transmission Electron Microscopy of Amorphisation and Recrystallisation of Silicon Nanowires under in situ Ion Irradiation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 231. ISBN 9781862181212

Hassan, Mothana A., Martin, Haydn and Jiang, Xiang (2013) Investigations on measurement speed of spatially dispersed short coherence interferometer. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 43-48. ISBN 9781862181212

Hassin, Osama (2013) Different Signal Processing Techniques for Predicting the Condition of Journal Bearings. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 232. ISBN 9781862181212

Hatwesh, Ashraf, Fletcher, Simon and Longstaff, Andrew P. (2013) Precise Position Control of Machine Tool Feed Drives in the Presence of Load Perturbation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 146-151. ISBN 9781862181212

Jilani, Rabia and Kitchin, Diane E. (2013) A Brief Review of Automated Knowledge Engineering Tools for Artificial Intelligence Planning & Scheduling. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 152-158. ISBN 9781862181212

Jimoh, Falilat and McCluskey, T.L. (2013) Self-management in road traffic networks. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 73-79. ISBN 9781862181212

Johnson, Anthony and Mishra, Rakesh (2013) Sustainability principles and their integration into a higher education mechanical engineering undergraduate programme. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 218-223. ISBN 9781862181212

Kumar, Prashant, Martin, Haydn, Maxwell, G. and Jiang, Xiang (2013) Design of a dispersive lateral scanning surface profilometer. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 159-164. ISBN 9781862181212

Li, Guoxing, Gu, Fengshou, Wang, Tie and Ball, Andrew (2013) The Potential Effects of Alternative Fuels on the Lubricating Condition of Compression-ignition Engines. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 233. ISBN 9781862181212

Maatgi, Musbah and Denton, Paul (2013) The successful implementation of ISO9000 through work environment analysis : a UK case study perspective. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 67-72. ISBN 9781862181212

Marangwanda, Gilbert and Mishra, Rakesh (2013) Response surface optimization of a fluid regulating control valve. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 234. ISBN 9781862181212

Meng, Yiqing and Lucas, Gary (2013) Two-phase flow meter for determining water and solids volumetric flow rate in stratified solids-in-water flows. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 37-42. ISBN 9781862181212

Molyneux-Berry, Paul and Bevan, Adam (2013) Residual stresses in railway wheels and their effect on damage rates through the life of a wheel. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 31-36. ISBN 9781862181212

Moschetti, Giuseppe (2013) Development of on-line interferometric metrology techniques for high dynamic range surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 235. ISBN 9781862181212

Mostafa, Kamrunnasim, Sibley, Martin J.N. and Mather, Peter (2013) Simulation and timing analyses of VHDL models of coder and decoder of duobinary pulse position modulation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 165-170. ISBN 9781862181212

Radhi, H.E. and Barrans, Simon (2013) Diversity metric assessment for multi-objective optimization. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 171-175. ISBN 9781862181212

Rehab, Ibrahim, Tian, Xiange, Gu, Fengshou and Ball, Andrew (2013) Roller element bearing fault detection and diagnosis based on an optimised envelope analysis. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 176-181. ISBN 9781862181212

Ren, Hongyu, Jiang, Xiang and Gao, F. (2013) Simulation of Tri-sensor Deflectometry for Freeform and Structured Specular Surfaces. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 236. ISBN 9781862181212

Shagluf, Abubaker, Longstaff, Andrew P., Fletcher, Simon, Denton, Paul and Myers, Alan (2013) The importance of assessing downtime cost related factors towards an optimised machine tool calibration schedule. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 182-187. ISBN 9781862181212

Sharif, Usman and Ward, Rupert (2013) The use of benchmarking in academic helpdesk service provision. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 188-193. ISBN 9781862181212

Smith, Ann and Gu, Fengshou (2013) Distributional considerations in inference based condition monitoring stages: detection, diagnosis and prognosis. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 238. ISBN 9781862181212

Tang, Dawei, Gao, F. and Jiang, Xiang (2013) Spectral Domain Low- Coherence Interferometry for On-line Surface Inspection. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 194-199. ISBN 9781862181212

Tansley, Dean, Fletcher, Simon and Longstaff, Andrew P. (2013) Smart sensor for surface temperature measurement on manufacturing machines. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 55-60. ISBN 9781862181212

Towsyfyan, Hossein, Gu, Fengshou and Ball, Andrew (2013) A review of mechanical seals tribology and condition monitoring. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 200-205. ISBN 9781862181212

Wang, Ruichen, Cattley, Robert, Tian, X., Gu, Fengshou and Ball, Andrew (2013) A Valid Model of a Regenerative Hybrid Shock Absorber System. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 206-211. ISBN 9781862181212

Wei, Nasha, Ball, Andrew and Gu, Fengshou (2013) A Study of Alternative Fuels Potential Effects on the Combustion Engines using acoustic emission. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 239. ISBN 9781862181212

Williamson, James, Martin, Haydn and Jiang, Xiang (2013) High Resolution Dispersed Reference Interferometry. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 212-217. ISBN 9781862181212

Zheng, Lin, Shi, Zhanqun and Ball, Andrew (2013) Vehicle Anti-lock Braking System Performance using dSPACE. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 1-6. ISBN 9781862181212

2012

Aboaisha, Hosain, Xu, Zhijie and El-Feghi, Idris (2012) An investigation on efficient feature extraction approaches for Arabic letter recognition. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 80-85. ISBN 978-1-86218-106-9

Abubaker, Azza and Lu, Joan (2012) Investigation effective factors into reading online arabic textbook for learning by children age 9 to 12. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9

Ali, M. and Lucas, Gary (2012) Optimisation of a Voltage Measurement and Control Circuit for an Imaging Electromagnetic Flow Meter. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 45-50. ISBN 978-1-86218-106-9

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Dynamic simulation of a roller rig. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 51-56. ISBN 978-1-86218-106-9

Arif, S. (2012) Electronic Braille Document Reader. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 142. ISBN 978-1-86218-106-9

Ashari, Djoni, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Artificial intelligence-based condition monitoring for practical electrical drives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 143. ISBN 978-1-86218-106-9

Asim, Taimoor, Mishra, Rakesh and Rao, Vasu (2012) Effect of Eccentricity on Pipe Boundary Layer Growth for Flows in Annulus. In: Computing and Engineering Researchers’ Conference, March 2012, University of Huddersfield.

Asim, Taimoor, Mishra, Rakesh and Rao, Vasu (2012) Spatiotemporal Growth of Laminar Boundary Layers in a Concentric Annulus. In: Computing and Engineering Researchers’ Conference, March 2012, University of Huddersfield.

Binzabiah, Reyad and Wade, Steve (2012) An Approach to Developing an Ontology that Represents Knowledge Embedded in Filmed Materials. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 91-97. ISBN 978-1-86218-106-9

Binzabiah, Reyad and Wade, Steve (2012) Modeling of an ontology to represent the knowledge embedded in filmed materials. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9

Ding, Hao and Scott, Paul J. (2012) Structure of Mathematical Morphology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 20-24. ISBN 978-1-86218-106-9

Elbarghathi, Fathalla, Ball, Andrew and Gu, Fengshou (2012) Two stage helical gearbox fault detection and diagnosis based on continuous wavelet transformation of time synchronous averaged vibration signals. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9

Elzawi, A. and Wade, Steve (2012) Barriers to ICT adoption in quality of engineering research in Libya : how to bridge the digital divide. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 144. ISBN 978-1-86218-106-9

Elzawi, A. and Wade, Steve (2012) Barriers to ICT adoption in quality of engineering research in Libya : how to bridge the digital divide? In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 98-103. ISBN 978-1-86218-106-9

Feradyan, Anthony and Holmes, Violeta (2012) Autonomous wireless sensor for building energy management with energy harvesting feasibility. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 145. ISBN 978-1-86218-106-9

Fricker, H., Taylor, Ruth and Gledhill, Duke (2012) Creation of the video game user interface. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9

Gubb, D., Holmes, Violeta, Kureshi, Ibad and James, Yvonne (2012) Implementing a Condor pool using a Green-IT policy. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 146. ISBN 978-1-86218-106-9

Haq, K. A. and Ward, Rupert (2012) Preliminary frameworks and models for telework maturity within organisations. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 104-109. ISBN 978-1-86218-106-9

Haq, K. A., Ward, Rupert and Wilkinson, Julie (2012) Preliminary frameworks and models for telework maturity within organisations. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 147. ISBN 978-1-86218-106-9

Hassan, Mothana A., Jiang, Xiang and Haydn, Martin (2012) Fast surface metrology using wavelength scanning and dispersive white light interferometry. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 148. ISBN 978-1-86218-106-9

Hassan, Mothana A., Jiang, Xiang and Martin, Haydn (2012) Comparison of the fringe visibility created by zero and first order diffracted beams in a dispersive interferometer. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 110-115. ISBN 978-1-86218-106-9

James, Yvonne, Holmes, Violeta, Kureshi, Ibad, Gubb, D. and Liang, Shuo (2012) Design of a new network infrastructure using RPC for the University of Huddersfield campus grid. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 149. ISBN 978-1-86218-106-9

Jimoh, F. and Holmes, Violeta (2012) Design of a wireless patient diagnosis system. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 69-74. ISBN 978-1-86218-106-9

Jimoh, F. and McCluskey, T.L. (2012) Using automated planning to enable autonomic properties in computer systems. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 150. ISBN 978-1-86218-106-9

Kenan, T. and Pislaru, Crinela (2012) Challenges related to e-learning implementation in higher education institutions in Libya. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 151. ISBN 978-1-86218-106-9

Kenan, T. and Pislaru, Crinela (2012) Challenges related to the implementation of e-learning in higher education institutions in Libya. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 116-122. ISBN 978-1-86218-106-9

Kumar, Prashant, Martin, Haydn, Maxwell, Graeme and Jiang, Xiang (2012) Design and Development of a Self Calibrated Optical Chip Interferometer for High Precision On-line Surface Measurement. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 14-19. ISBN 978-1-86218-106-9

Kumar, Prashant, Martin, Haydn, Maxwell, Graeme and Jiang, Xiang (2012) Design and development of a self calibrated optical chip interferometer for high precision on-line surface measurement. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 152. ISBN 978-1-86218-106-9

Kureshi, Ibad, Holmes, Violeta, Cooke, D., Allan, R., Liang, Shuo and Gubb, D. (2012) Robust mouldable intelligent scheduling using application benchmarking for elastic environments. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 156. ISBN 978-1-86218-106-9

Kureshi, Ibad, Holmes, Violeta, Gubb, D., Liang, Shuo, Bonner, Stephen and Cooke, D. (2012) Providing laaS using a private cloud in an HE environment. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 155. ISBN 978-1-86218-106-9

Kureshi, Ibad, Holmes, Violeta, Liang, Shuo and Cooke, D. (2012) Optimising multi-user and multi-application HPC system utilisation using effective queue management. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 154. ISBN 978-1-86218-106-9

Kureshi, Ibad, Holmes, Violeta, Liang, Shuo, Gubb, D. and Cooke, D. (2012) High performance distributed computing resources to enable e-science research. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 153. ISBN 978-1-86218-106-9

Leeungculsatien, Teerachai and Lucas, Gary (2012) Measurement of velocity profiles in multiphase flow using a multi-electrode electromagnetic flow meter. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 31-37. ISBN 978-1-86218-106-9

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2012) Integrated Tactile and Optical Measuring Systems in Three Dimensional Metrology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 1-6. ISBN 978-1-86218-106-9

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2012) An Introduction to Morphological Filters in Surface Metrology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 7-13. ISBN 978-1-86218-106-9

Lucas, Gary (2012) Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9

Meng, Yiqing and Lucas, Gary (2012) A Multiphase Flow Measurement System Comprising an Impedance Cross Correlation (ICC) Device and an Imaging Electromagnetic Flow Meter (IEF). In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 157. ISBN 978-1-86218-106-9

Muhamedsalih, Yousif and Lucas, Gary (2012) A Non-Intrusive Impedance Cross-Correlation (ICC) Flow Meter for Dispersed Phase Velocity and Volume Fraction Profile Measurement in Two Phase Flows. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 38-44. ISBN 978-1-86218-106-9

Musbah, Abdurazzaq and Lucas, Gary (2012) Experimental and theoretical study of annular flow using a venturi with conductance sensors. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 123-128. ISBN 978-1-86218-106-9

Musbah, Abdurazzaq and Lucas, Gary (2012) Wet gas flow metering technique using a venturi with conductance sensors. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 159. ISBN 978-1-86218-106-9

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Review of control strategies used in modern railway vehicles. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 160. ISBN 978-1-86218-106-9

Parkinson, S., Longstaff, Andrew P., Crampton, Andrew, Fletcher, Simon, Allen, Gary and Myers, Alan (2012) Automation as a Solution for Machine Tool Calibration Planning. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 57-62. ISBN 978-1-86218-106-9

Radhi, H.E. and Barrans, Simon (2012) Comparison between multiobjective optimization algorithms. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 129-135. ISBN 978-1-86218-106-9

Radhi, H.E. and Barrans, Simon (2012) Comparison between multiobjective optimization algorithms. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9

Somaraki, V. and McCluskey, T.L. (2012) A robust validation framework for trend mining : a study in diabetic retinopathy. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 63-68. ISBN 978-1-86218-106-9

Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Myers, Alan, Fletcher, Simon and Ford, Derek G. (2012) Analysis of complex interactions between mechanical elements using ansys and simulink. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 136-141. ISBN 978-1-86218-106-9

Wang, R., Gu, Fengshou and Ball, Andrew (2012) Energy recovery system optimisation in automotives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 161. ISBN 978-1-86218-106-9

Zeng, S., Blunt, Liam and Jiang, Xiang (2012) Material removal investigation in bonnet polishing of CoCr alloy. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 25-30. ISBN 978-1-86218-106-9

2010

Lucas, Gary and Xu, Zhijie, eds. (2010) Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932

AL-Majali, Faris and Prigmore, Martyn (2010) Consumers channel choice behavior in multi-channel environments: what are the influences on consumers to choose the online distribution channels over other alternative offline channels. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 98-104. ISBN 9781862180932

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2010) Learning and Teaching Mechanical Engineering Courses with Blended Learning Environment - Higher Order Application of Bloom’s Taxonomy. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 84-91. ISBN 9781862180932

Aboaisha, Hosain, Xu, Zhijie and El-Feghi, Idris (2010) Fuzzy Fusion of Colour and Shape Features for Efficient Image Retrieval. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 31-36. ISBN 9781862180932

Abuhabaya, Abdullah, Fieldhouse, John D. and Brown, D.R. (2010) Evaluation of Properties and use of waste vegetable oil (WVO), pure vegetable oils and standard diesel as used in a compression ignition engine. In: Future Technologies in Computing and Engineering Annual Researchers' Conference (CEARC'10). The University of Huddersfield, University of Huddersfield, Computing and Engineering Annual Researchers’ Conference 2010, pp. 71-76. ISBN 9781862180932

Ahmed, Mahmud and Gu, Fengshou (2010) Fault classification using an Artificial Neural Network based on Vibrations from a Reciprocating Compressor. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 92-97. ISBN 9781862180932

Aitchison, Michael and Fenton, Steven (2010) Can Transistors Sound like Valves? In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 20-26. ISBN 9781862180932

Al-Nedawe, Basman, Sibley, Martin J.N. and Mather, Peter (2010) Microelectronic implementation of error correcting codes for dicode pulse position modulation. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 184. ISBN 9781862180932

Algasim, Hamad and Fieldhouse, John D. (2010) Performance and emissions of compression ignition engines using waste cooked oil as fuel. In: Future Technologies in Computing and Engineering Annual Researchers' Conference (CEARC'10). The University of Huddersfield, Huddersfield, UK, pp. 65-70. ISBN 9781862180932

Alseddiqi, Mohamed and Mishra, Rakesh (2010) A Diagnostic study on the teaching and learning styles in engineering education. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 105-109. ISBN 9781862180932

Appadoo, Robin, Ball, Andrew and Gu, Fengshou (2010) Optimizing condition monitoring techniques applied to a three stage reciprocating compressor in a FMCG industry. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 185. ISBN 9781862180932

Arebi, Lufti, Gu, Fengshou and Ball, Andrew (2010) Rotor Misalignment Detection using a Wireless Sensor and a Shaft Encoder. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 6-13. ISBN 9781862180932

Arief, Ikhwan and Chen, Xun (2010) Key Parameters In Loose Abrasive Machining. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 1-5. ISBN 9781862180932

Baqqar, Mabrouka, Gu, Fengshou and Lu, Joan (2010) Machine Performance and Condition Monitoring Through Data Mining and Database Optimization. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 186. ISBN 9781862180932

Bashir, Abid and Denton, Paul (2010) The Identification of Enterprise System Limitations within Manufacturing Supply Chains. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 110-115. ISBN 9781862180932

Berberkic, Sanjin, Mather, Peter and Holmes, Violeta (2010) A Low Cost Electronic Load for Renewable Energy Systems. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 187. ISBN 9781862180932

Borisov, Oleg, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2010) Efficient Machine Error Measurement. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932

Buhafa, Adel M and Sibley, Martin J.N. (2010) Performance of Di-code Pulse Position Modulation Technique in Diffuse Indoor Wireless Optical Communication Systems. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 188. ISBN 9781862180932

Clough, David A, Fletcher, Simon and Longstaff, Andrew P. (2010) Non-contact measurement and analysis of machine tool spindles. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 189. ISBN 9781862180932

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2010) Online Monitoring of Engine Oil Quality Based on AE Signal Analysis. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 116-123. ISBN 9781862180932

Hajjaji, Mufeed, Denton, Paul and Jackson, Steve (2010) The effectiveness of using project management tools and techniques for delivering projects. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 124-129. ISBN 9781862180932

Iqbal, Saqib and Allen, Gary (2010) A notational Design of Join Points. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 27-30. ISBN 9781862180932

Jilani, Aisha (2010) Mobile Phone Text Processing and Question-Answering. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 130-135. ISBN 9781862180932

Lan, Xiangqi, Blunt, Liam and Xiao, Shaojun (2010) Building a Flexible Surface Characterisation System Architecture. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 43-47. ISBN 9781862180932

Li, Andol X and Bonner, John V.H. (2010) Improving prototype consistence for wizard-of-oz simulations and evaluations. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 136-141. ISBN 9781862180932

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2010) A Fast Algorithm for Morphological Filters. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 190. ISBN 9781862180932

Maatgi, Musbah and Denton, Paul (2010) Achieving ISO 9000 Success in SMEs: The Development of a Work Environment Framework. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 37-42. ISBN 9781862180932

Mohammed, Hasanain, Sibley, Martin J.N. and Mather, Peter (2010) Investigation of doppler effects on high mobility OFDM-MIMO systems. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 142-147. ISBN 9781862180932

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2010) Vibration compensation of wavelength scanning interferometer for in-process surface inspection. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 148-153. ISBN 9781862180932

Muhamedsalih, Yousif and Lucas, Gary (2010) Measuring Two Phase Flow Parameters Using Impedance Cross-Correlation and Electromagnetic Flow meters. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 191. ISBN 9781862180932

Muller, Matthias and Barrans, Simon (2010) Predicting and determining the contact pressure distribution in joints formed by v-band clamps. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 154-159. ISBN 9781862180932

Oluwajobi, Akinjide O. and Chen, Xun (2010) The effect of tool geometry on rubbing and ploughing phenomena in nano abrasive machining. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 160-165. ISBN 9781862180932

Opoz, Tahsin Tecelli and Chen, Xun (2010) Finite element simulation of chip formation. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 166-171. ISBN 9781862180932

Parkinson, Simon, Longstaff, Andrew P., Fletcher, Simon, Allen, Gary, Crampton, Andrew and Myers, Alan (2010) A novel framework for establishing a machine tool quality metric. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932

Pati, Prasanta and Mather, Peter (2010) Finite Element Analysis of Metal Weapons in a Time-domain Transient Magnetic Field. In: Future Technologies in Computing and Engineering Annual Researchers' Conference (CEARC'10). University of Huddersfield, Huddersfield, UK, pp. 77-83. ISBN 9781862180932

Perkins, Chris J, Longstaff, Andrew P., Fletcher, Simon, Willoughby, P and Verma, Rocky (2010) Limitations of Data Handling within the Machine Tool Service environment. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 192. ISBN 9781862180932

Qi, Qufen, Blunt, Liam, Scott, Paul J. and Jiang, Xiang (2010) Modeling of the concepts in ISO standards for profile surface texture. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 172-176. ISBN 9781862180932

Radhi, H.E. and Barrans, Simon (2010) Finite Element Analysis of Effect of Weld Toe Radius and Plate Thickness on Fatigue Life of Butt Welded Joint. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 60-64. ISBN 9781862180932

Saeed, Bakhtiar I. and Mehrdadi, Bruce (2010) Intelligent Wireless Sensor Network. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 193. ISBN 9781862180932

Wang, Jian, Jiang, Xiang and Blunt, Liam (2010) Simulation of Adaptive Sampling in Profile Measurement for Structured Surfaces. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 48-53. ISBN 9781862180932

Wilkinson, Adam, Chen, Xun and Blunt, Liam (2010) Experimentation to Reduce Friction from Novel Abrasive Tape Polishing Method. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 54-59. ISBN 9781862180932

Wright, Daniel, Murgatroyd, S., Longstaff, Andrew P., Myers, Alan and Fletcher, Simon (2010) Process control within an SME to increase output and achieve consistent manufacture of components. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932

Zeng, Shengye, Blunt, Liam, Jiang, Xiang and Bills, Paul J. (2010) Investigation of the material removal characteristic for polishing CoCr alloy. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 177-182. ISBN 9781862180932

Zhen, Dong, Gu, Fengshou and Ball, Andrew (2010) The Study of Acoustic Source Localization using a Small Microphone Array for Condition Monitoring. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 14-19. ISBN 9781862180932

2009

Lucas, Gary and Xu, Zhijie, eds. (2009) Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield. ISBN 9781862180857

Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2009) Bearing fault diagnosis based on vibration signals. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 93-98. ISBN 9781862180857

Al-Arbi, Salem, Gu, Fengshou, Guan, Luyang and Ball, Andrew (2009) Remotely gear condition monitoring using traditional signal processing techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 111-117. ISBN 9781862180857

Alabed, Asmaa and Chen, Xun (2009) Development of a knowledge warehouse for grinding. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 99-104. ISBN 9781862180857

Alaiwi, A, Sibley, Martin J.N., Mather, Peter and Holmes, Violeta (2009) Extremely low frequency based communication link. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 105-110. ISBN 9781862180857

Alseddiqi, Mohamed, Mishra, Rakesh and Pislaru, Crinela (2009) Identification of skills gap between school-based learning and work-based learning in technical and vocational education in Bahrain. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, UK, pp. 118-123. ISBN 9781862180857

Bingham, Mark, Taylor, D., Gledhill, Duke and Xu, Zhijie (2009) A multi-view interest point based approach to photometric realism within augmented reality systems. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 82-88. ISBN 9781862180857

Charitopoulos, Romanos and Sibley, Martin J.N. (2009) Experimental coder/decoder of dicode pulse position modulation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 124-129. ISBN 9781862180857

Colley, Gareth, Mishra, Rakesh, Rao, H.V. and Woolhead, R. (2009) Performance evaluation of three cross flow vertical axis wind turbine configurations. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 130-136. ISBN 9781862180857

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2009) Detection of diesel engine valve clearance by acoustic emission. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 7-13. ISBN 9781862180857

Iqbal, Saqib and Allen, Gary (2009) Aspect-oriented design model. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 137-141. ISBN 9781862180857

Lan, Xiangqi, Jiang, Xiang, Blunt, Liam and Xiao, Shaojun (2009) An adaptive system framework for surface characterisation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 142-146. ISBN 9781862180857

Leeungculsatien, Teerachai, Lucas, Gary and Zhao, Xin (2009) A numerical approach to determine the magnetic field distribution of an electromagnetic flow meter. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 147-152. ISBN 9781862180857

Li, Andol X and Bonner, John V.H. (2009) Designing interfaces to visualise domestic communication patterns. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 88-92. ISBN 9781862180857

Malviya, Vihar, Gundala, Naresh and Mishra, Rakesh (2009) Effect of cross wind on aerodynamic coefficients of ground vehicles. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 19-25. ISBN 9781862180857

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2009) Efficient offline thermal error modelling strategy for accurate thermal behaviour assessment of the machine tool. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 26-32. ISBN 9781862180857

Millea, Timothy A. and Wakefield, Jonathan P. (2009) Automating the composition of popular music : the search for a hit. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 45-50. ISBN 9781862180857

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2009) Interferograms analysis for wavelength scanning interferometer using convolution and fourier transform. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 33-37. ISBN 9781862180857

Muller, M and Barrans, Simon (2009) Ultimate axial load capacity of v-band clamp joints. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 14-18. ISBN 9781862180857

Naveed, Munir, Kitchin, Diane E. and Crampton, Andrew (2009) Dynamic real-time hierarchical heuristic search for pathfinding. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 153-158. ISBN 9781862180857

Oluwajobi, Akinjide O. and Chen, Xun (2009) Cellular automata modelling of micro abrasive machining. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 159-164. ISBN 9781862180857

Opoz, Tahsin Tecelli and Chen, Xun (2009) Finite element simulation of grinding process and micro-scale abrasive wear. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 165-171. ISBN 9781862180857

Pillutla, G., Mishra, Rakesh, Barrans, Simon and Barrans, J (2009) Experimental and numerical prediction of airflow in a room - literature summary. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 172-177. ISBN 9781862180857

Rabadi, Y.E. and Lu, Joan (2009) Building secured XML real-time interactive data exchange architecture - a comparison test between TCP vs. UDP protocols performance/. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 178-183. ISBN 9781862180857

Romero-Perez, Julian and Fazenda, Bruno (2009) Characterisation of the directionality of reflections in small room acoustics. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 58-63. ISBN 9781862180857

Shah, Mohammad Munshi Shahin, McCluskey, T.L. and West, Margaret M. (2009) A study of synthesizing artificial intelligence (AI) planning domain models by using object constraints. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 64-69. ISBN 9781862180857

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Predicting specific gravity and viscosity of biodiesel fuels. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 38-44. ISBN 9781862180857

Wang, J, Jiang, Xiang and Blunt, Liam (2009) A survey of potential sampling strategies for measurement of structured surfaces. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 184-189. ISBN 9781862180857

Wang, J, Xu, Zhijie and Hoder, M.E. (2009) Fast human detection for video event recognition. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 70-75. ISBN 9781862180857

Wankling, Matthew and Fazenda, Bruno (2009) An auralisation method for real time subjective testing of modal parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 51-57. ISBN 9781862180857

Xu, Qian, Xu, Zhijie and Holder, Marcus (2009) Predicting specific gravity and viscosity of level-of-detail control in hybrid rendering application. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 76-81. ISBN 9781862180857

Zhang, Hongyu and Shi, John Z. (2009) Modelling for a Turbocharger in Rotordynamics. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 1-6. ISBN 9781862180857

Zhu, Hao, Blunt, Liam and Jiang, Xiang (2009) Flexible shape extraction for micro/nano scale structured surfaces. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 190-194. ISBN 9781862180857

2008

Lucas, Gary and Xu, Zhijie, eds. (2008) Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield. ISBN 978-1-86218-067-3

Abubaker, Azza, Lu, Joan and Yip, Yau Jim (2008) Framework to design new model of E-journals. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 93-99. ISBN 978-1-86218-067-3

Al-Hinai, Sulaiyam and Lucas, Gary (2008) A flowmeter for measuring the dispersed phase velocity in multiphase flow with non-uniform velocity profiles. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 55-62. ISBN 978-1-86218-067-3

Al-Yarubi, Qahtan and Lucas, Gary (2008) Measurement of the film thickness, film velocity and entrainment fraction in a liquid-air annular flow using a conductance flowmeter. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 63-68. ISBN 978-1-86218-067-3

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter, Myers, Alan and Briggs, Jack (2008) A multifrequency FM-based ultrasonic system for accuracy 3D measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 9-14. ISBN 978-1-86218-067-3

Barnes, Andrew, McCluskey, T.L. and Osborne, Hugh (2008) Benefits of associative classification within text categorisation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 34-39. ISBN 978-1-86218-067-3

Bingham, Mark, Taylor, D., Gledhill, Duke and Xu, Zhijie (2008) Integration of real and virtual light sources in augmented reality worlds. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 28-33. ISBN 978-1-86218-067-3

Hasan, Abbas and Lucas, Gary (2008) Simulation and static measurement of the gas volume fraction in a separated flow model using a Conductance Multiphase Venturi Meter (CMVM). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 69-74. ISBN 978-1-86218-067-3

Malviya, Vihar, Mishra, Rakesh and Fieldhouse, John D. (2008) Comparative computational analysis of drag-reducing devices for tractor-trailers. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 1-8. ISBN 978-1-86218-067-3

Martin, Haydn and Jiang, Xiang (2008) Stabilising fibre interferometers. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 75-80. ISBN 978-1-86218-067-3

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2008) Novel and efficient thermal error reduction strategy for machine tool performance improvement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 15-22. ISBN 978-1-86218-067-3

Mustafa, Faisal and McCluskey, T.L. (2008) Dynamic web services composition: current issues. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 48-54. ISBN 978-1-86218-067-3

Oluwajobi, Akinjide O. and Chen, Xun (2008) Modelling abrasive machining techniques using molecular dynamics. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 100-105. ISBN 978-1-86218-067-3

Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, Simon and Pislaru, Crinela (2008) Simulation of the structural elements of a three axis VMC for machine tool error compensation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 23-27. ISBN 978-1-86218-067-3

Rashid, Baydaa T., Alwan, Raad F., Lu, Joan and Yip, Yau Jim (2008) Recent development in XML-IR. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 106-109. ISBN 978-1-86218-067-3

Su, Yang, Xu, Zhijie, Jiang, Xiang and Pickering, Jonathan (2008) Discrete wavelet transform on consumer-level graphics processing unit. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 40-47. ISBN 978-1-86218-067-3

Wang, Jing, Xu, Zhijie, Pickering, Jonathan and Mishra, Rakesh (2008) An innovative volume based video feature extraction technique. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 110-116. ISBN 978-1-86218-067-3

Wankling, Matthew and Fazenda, Bruno (2008) The optimization of modal spacing within small rooms. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 117-124. ISBN 978-1-86218-067-3

Xu, Yuanping, Xu, Zhijie, Jiang, Xiang, Scott, Paul J. and Pickering, Jonathan (2008) Evaluation on the categorical DBMS for the VirtualGPS knowledge system. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 81-86. ISBN 978-1-86218-067-3

Zhang, Zhiyong, Lu, Joan and Yip, Yau Jim (2008) Computer aided mammography. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 125-130. ISBN 978-1-86218-067-3

Zhu, Hao, Xiao, Shaojun, Jiang, Xiang and Blunt, Liam (2008) MEMS microstructured surface characterisation based on wavelet transform techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 87-92. ISBN 978-1-86218-067-3

2007

Agurto Goya, Alan and Sibley, Martin J.N. (2007) New proposal for the detection of concealed weapons. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-8.

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter and Myers, Alan (2007) A high accuracy ultrasound distance measurement system using binary frequency shift-keyed signal and phase detection. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

Ghosna, Fadi and Sibley, Martin J.N. (2007) Pulse position modulation coding schemes for optical intersatellite links. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-12.

Gilkes, Oliver S., Mishra, Rakesh, Rao, H.V. and Fieldhouse, John D. (2007) Transient response of turbocharged diesel engine for transient operation using air injection assist system. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

Hasan, Abbas and Lucas, Gary (2007) Modeling of a homogenous gas-water two phase flow through a Venturi and vertical pipe (A prediction of pressure drop sign change in two phase flow). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Jiang, Xiang, Martin, Haydn and Wang, Kaiwei (2007) Vibration compensating beam scanning interferometer for surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield.

Mahmood, Qazafi, Thabtah, Fadi and McCluskey, T.L. (2007) Looking at the class associative classification training algorithm. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-9.

Malviya, Vihar, Mishra, Rakesh, Palmer, Edward and Majumdar, Bireswar (2007) Numerical analysis and optimisation of multi-hole pressure probe geometry. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-8.

Moore, David J. and Wakefield, Jonathan P. (2007) Surround Sound for Large Audiences: What are the Problems? In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

Odunze, N., Mishra, Rakesh and Reed, J. (2007) The CFD analysis of the effects of the size and location of an Air-Inlet in domestic kitchen extraction. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

Palmer, Edward and Fieldhouse, John D. (2007) Comparison of air flow and heat dissipation from the front brakes fitted to a high performance GT Car. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-8.

Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, C. and Pislaru, Crinela (2007) Analysis and reduction of machine tool non-rigid errors. In: School of Computing and Engineering Annual Researchers’ Conference 2007, 14th December 2007, University of Huddersfield. (Unpublished)

Pradhan, Suman, Lucas, Gary and Zhao, X. (2007) Measurement of Reference Bubble Velocity Vector for a Local 4 Sensor Probe Using Orthogonal High Speed Cameras. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Yang, Shuming and Jiang, Xiang (2007) The beam propagation method used for the design of an integrated optical coupler. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Yeung, Ka Yiu and Chen, Xun (2007) 3D freeform component fixture design optisation using a genetic algorithm. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2007) Generation of fretting wear debris at the stem-cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-4.

Zhang, X., Jiang, Xiang and Crampton, Andrew (2007) Numerical Analysis of the Boundary Effect of Radial Basis Functions in 3D Surface Reconstruction. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

2006

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Fieldhouse, John D., Ward, Steve and McComish, John (2006) Effect of integration of computer simulations in traditional teaching methodology. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, UK, pp. 1-8.

Araghi, Amir (2006) Infrastructure for web services that perform automated reasoning. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Brennan, James K., Jiang, Xiang, Crampton, Andrew and Leach, Richard K. (2006) Propagation of measurement uncertainty for surface texture parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Bryant, David, Crampton, Andrew, Fieldhouse, John D. and Talbot, Chris J. (2006) Discussion of characteristics of brake judder and the necessary data acquisition system for complete analysis. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Charitopoulos, Romanos and Sibley, Martin J.N. (2006) Power Spectral Density of Dicode Pulse Position Modulation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-5.

Gilkes, Oliver S. and Mishra, Rakesh (2006) Comparison of passive and active methods for improving transient performance of turbocharged engine systems. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Li, Y., Tian, Gui Yun and Cui, Z. (2006) Theoretical and experimental study on magnetically-actuated micromirrors for electromagnetic NDE. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Martin, Haydn (2006) A self stabilising multiplexed interferometer for on-line surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Moore, John David and Wakefield, Jonathan P. (2006) An enhanced approach to surround sound decoder design. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Needham, Paul M. (2006) Design for Six Sigma, its Potential Effect on Weight in Modern Military Aircraft. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Palmer, Edward, Mishra, Rakesh and Fieldhouse, John D. (2006) Analysis of air flow and heat dissipation from a high performance passenger car front brake rotor. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Panayotopoulos, Nikolaos, Lucas, Gary and Pradhan, Suman (2006) Simulation of a four sensor probe using a rotating dual sensor probe. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Pradhan, Suman, Lucas, Gary and Panayotopoulos, Nikolaos (2006) Sensitivity analysis for a 4-sensor probe used for bubble velocity vector measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Richardson, Nona Elizabeth (2006) Towards inducing hierarchical task network domain models for AI planning from examples. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-5.

Wang, Yan, Scott, Paul J. and Jiang, Xiang (2006) Category model to modeling the surface texture knowledge-base. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-7.

Wilson, J. and Tian, Gui Yun (2006) Pulsed magneto-acoustic emission sensor array for stress measurement and material.’characterisation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Yang, Chunlei, Tian, Gui Yun and Ward, Stephen (2006) Multibiometrics authentication in pos application. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Yang, Shuming and Jiang, Xiang (2006) The roughness measurement of the super-smooth surface of hard disks. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-7.

Yin, Ying and Tian, Gui Yun (2006) Automatic x-ray image characterisation for non-destructive evaluation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Zhang, H., Brown, L. and Blunt, Liam (2006) Investigation of characteristics at the stem cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.