Items where Author is Ball, Andrew

A

Alabied, Samir, Hamomd, Osama, Daraz, Alsadak, Gu, Fengshou and Ball, Andrew (2017) Fault Diagnosis of Centrifugal Pumps based on the Intrinsic Time-scale Decomposition of Motor Current Signals. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601

Abusaad, Samieh, Gu, Fengshou, Zhang, R. and Ball, Andrew (2015) Observer-based Fault Detection and Diagnosis for Mechanical Transmission Systems with Sensorless Variable Speed Drives. In: 28th International Congress of Condition Monitoring and Diagnostic Engineering Management (COMADEM 2015), 1st - 4th December 2015, Buenos Aires, Argentina.

Abusaad, Samieh, Brethee, Khaldoon F., Assaeh, M., Zhang, Ruiliang, Gu, Fengshou and Ball, Andrew (2015) The detection of lubricating oil viscosity changes in gearbox transmission systems driven by sensorless variable speed drives using electrical supply parameters. Journal of Physics: Conference Series, 628. 012078. ISSN 1742-6588

Abusaad, Samieh, Benghozzi, Ahmed, Smith, Ann, Gu, Fengshou and Ball, Andrew (2015) The Detection of Shaft Misalignments using Motor Current Signals from a Sensorless Variable Speed Drive. In: Vibration Engineering and Technology of Machinery. Mechanisms and Machine Science (23). Springer, London, pp. 173-183. ISBN 978-3-319-09918-7

Alghadi, Mostafa, Ball, Andrew, Mishra, Rakesh and Asim, Taimoor (2015) Drive Cycle Optimisation for Pollution Reduction. In: 2nd International Conference on Petroleum and Petrochemical Engineering, 10-11 January 2015, Dubai (UAE). (Unpublished)

Abuhabaya, Abdullah, Gu, Fengshou and Ball, Andrew (2014) Combustion heat release models of biodiesels. In: 2nd World Congress on Petrochemistry and Chemical Engineering, 27th - 29th October 2014, Las Vegas, USA.

Aburass, Ali, Yangchun, Guo, Tie, Wang, Fengshou, Gu, Ball, Andrew and Brown, D.R. (2014) Investigation of the Effect of Biodiesel Blends on Fuel Injection Pumps based on Vibration and Pressure Measurements. In: VETOMAC-X 2014, 9-11th September 2014, Manchester Conference Centre (Days Hotel), University of Manchester, UK. (Submitted)

Ahmed, M., Smith, Ann, Gu, Fengshou and Ball, Andrew (2014) Fault Diagnosis of Reciprocating Compressors Using Revelance Vector Machines with A Genetic Algorithm Based on Vibration Data. In: The 20th International Conference on Automation and Computing (ICAC'14), 12-13 September 2014, Cranfield University. (Unpublished)

Ahmaida, Anwar, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2014) Gear wear process monitoring using acoustic signals. In: 21st International Congress on Sound and Vibration, 13th - 17th July, 2014, Beijing, China.

Abdalla, Gaballa, Tian, Xiange, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2014) Misalignment diagnosis of a planetary gearbox based on vibration analysis. In: 21st International Congress on Sound and Vibration, 13th - 17th July, 2014, Beijing, China.

Abusaad, Samieh, Benghozzi, Ahmed, Brethee, Khaldoon F., Gu, Fengshou and Ball, Andrew (2014) Investigating the Effect of Water Contamination on Gearbox Lubrication based on Motor Control Data from a Sensorless Drive. In: Proceedings of the 3rd international workshop and congress on eMaintenance: June 17-18 Luleå, Sweden : eMaintenance, Trends in technologies & methodologies, challenges, possibilites and applications. Luleå tekniska universite, Luleå, pp. 61-67. ISBN 978-91-7439-972-1

Ashari, Djoni, Lane, Mark, Gu, Fengshou and Ball, Andrew (2014) Detection and Diagnosis of Broken Rotor Bar Based on the Analysis of Signals from a Variable Speed Drive. In: 3rd International Workshop and Congress on eMaintenance, 17th - 18th June 2014, Lulea, Sweden.

Al-Braik, Abdulrahman, Hamomd, Osama, Gu, Fengshou and Ball, Andrew (2014) Diagnosis of Impeller Faults in a Centrifugal Pump Using Vibration Signals. In: Eleventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 10th - 12th June 2014, Manchester, UK.

Alghadhi, Mostafa, Ball, Andrew, Kollar, Laszlo, Mishra, Rakesh and Asim, Taimoor (2014) Fuel Consumption Tabulation in Laboratory Conditions. In: International Research Conference on Engineering, Science and Management, 4-5 June 2014, Dubai.

Alghadhi, Mostafa, Ball, Andrew, Kollar, László E., Mishra, Rakesh and Asim, Taimoor (2014) Fuel Consumption Tabulation in Laboratory Conditions. International Journal of Recent Development in Engineering and Technology, 2 (4). pp. 29-38. ISSN 2347-6435

Abusaad, Samieh, Benghozzi, Ahmed, Brethee, Khaldoon F., Gu, Fengshou and Ball, Andrew (2014) Investigating the Effect of Water Contamination on Gearbox Lubrication based upon Motor Control Data from a Sensorless Drive. In: 3rd International Workshop and Congress on eMaintenance, 17th - 18th June 2014, Lulea, Sweden.

Aburass, Ali, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) Combustion Diagnostics of a Diesel Engine with Biodiesel Fuels based on Vibro-acoustics and In-Cylinder Pressure Measurements. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 13-18. ISBN 9781862181212

Ahmaida, Anwar, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) Fatigue Prediction of a Gear Transmission System based on Vibro-Acoustic Measurements. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 93-99. ISBN 9781862181212

Abdalla, Gaballa, Ball, Andrew and Gu, Fengshou (2013) Fault Detection and Diagnosis of Ball Bearing Using Advanced Vibration Analysis Techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 224. ISBN 9781862181212

Alghadhi, Mosttafa, Ball, Andrew, Gu, Fengshou and Cattley, Robert (2013) Standard drive cycle recreation from general driving behaviour. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 100-105. ISBN 9781862181212

Alwodai, Ahmed, Shao, Y., Yuan, X., Ahmed, M., Gu, Fengshou and Ball, Andrew (2013) Inter-Turn Short Circuit Detection Based on Modulation Signal Bispectrum Analysis of Motor Current Signals. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. ICAC 2013 . Brunel University, London, UK. ISBN 978-1908549082

Alwodai, Ahmed, Wang, Tie, Chen, Zhi, Gu, Fengshou, Cattley, Robert and Ball, Andrew (2013) A Study of Motor Bearing Fault Diagnosis using Modulation Signal Bispectrum Analysis of Motor Current Signals. Journal of Signal and Information Processing, 4 (3B). pp. 132-137. ISSN 2159-4481

Abusaad, Samieh, Benghozzi, Ahmed, Shao, Yimin, Gu, Fengshou and Ball, Andrew (2013) Utilizing Data from a Sensorless AC Variable Speed Drive for Detecting Mechanical Misalignments. Key Engineering Materials, 569. pp. 465-472. ISSN 1013-9826

Abusaad, Samieh, Benghozzi, Ahmed, Gu, Fengshou and Ball, Andrew (2013) Utilizing Data from a Sensorless AC Variable Speed Drive for Detecting Mechanical Misalignments. In: Damage Assessment of Structures. DAMAS 2013, X . Trans Tech Publications Ltd., Dublin, Ireland, pp. 465-472. ISBN 978-3-03785-796-0

Ashari, Djoni, Pislaru, Crinela and Ball, Andrew (2012) Energy Optimisation of Sensorless Induction Motor Drives Using a Novel Robust-Adaptive Flux Simulator. In: The 2nd International Electric Drives Production Conference, 15th - 18th October 2012, Nuremberg, Germany. (Unpublished)

Alwodai, Ahmed, Xia, X., Shao, Yimin, Gu, Fengshou and Ball, Andrew (2012) Modulation Signal Bispectrum Analysis of Motor Current Signals for Stator Fault Diagnosis. In: 18th International Conference on Automation and Computing (ICAC), 2012. IEEE, Loughborough, UK, pp. 1-6. ISBN 9781908549006

Ahmed, M., Gu, Fengshou and Ball, Andrew (2012) Fault Detection and Diagnosis using Principal Component Analysis of Vibration Data from a Reciprocating Compressor. In: 18th International Conference On Automation And Computing (ICAC), 2012. IEEE, Cardiff, UK, pp. 461-466. ISBN 978-1-4673-1559-3

Anyakwo, Arthur, Pislaru, Crinela and Ball, Andrew (2012) A New Method for Modelling and Simulation of the Dynamic Behaviour of the Wheel-rail contact. International Journal of Automation and Computing, 9 (3). pp. 237-247. ISSN 1476-8186

Abdusslam, S.A., Raharjo, Parno, Gu, Fengshou and Ball, Andrew (2012) Bearing defect detection and diagnosis using a time encoded signal processing and pattern recognition method. Journal of Physics: Conference Series, 364. 012036. ISSN 1742-6596

Alwodai, Ahmed, Gu, Fengshou and Ball, Andrew (2012) A Comparison of Different Techniques for Induction Motor Rotor Fault Diagnosis. Journal of Physics: Conference Series, 364. 012066. ISSN 1742-6596

Albraik, A., Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2012) Diagnosis of Centrifugal Pump Faults Using Vibration Methods. Journal of Physics: Conference Series, 364. 012139. ISSN 1742-6596

Ahmed, M., Gu, Fengshou and Ball, Andrew (2012) Fault Detection of Reciprocating Compressors using a Model from Principles Component Analysis of Vibrations. Journal of Physics: Conference Series, 364. 012133. ISSN 1742-6596

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modelling and simulation of dynamic wheel-rail interaction using a roller rig. Journal of Physics: Conference Series, 364. 012060. ISSN 1742-6596

Anyakwo, Arthur, Pislaru, Crinela and Ball, Andrew (2012) A New Method for Modelling and Simulation of the Dynamic Behaviour of the Wheel-rail contact. International Journal of Automation and Computing, 9 (3). ISSN 1476-8186

Arebi, Lufti, Gu, Fengshou and Ball, Andrew (2012) A comparative study of misalignment detection using a novel Wireless Sensor with conventional Wired Sensors. Journal of Physics: Conference Series, 364. 012049. ISSN 1742-6596

Ashari, Djoni, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Artificial intelligence-based condition monitoring for practical electrical drives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 143. ISBN 978-1-86218-106-9

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Dynamic simulation of a roller rig. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 51-56. ISBN 978-1-86218-106-9

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Fengshou, Gu (2011) Modelling the Dynamic Behaviour of the Wheel-Rail Interface by Using a Novel 3D Wheel-Rail Contact Model. In: 5th IET Conference on Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 29-30 November 2011, Derby Conference Centre, UK.

Ahmed, Mahmud, Abdusslam, S.A., Baqqar, Mabrouka, Gu, Fengshou and Ball, Andrew (2011) Fault Classification of Reciprocating Compressor Based on Neural Networks and Support Vector Machines. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2011) A Novel Approach To Modelling And Simulation Of The Dynamic Behaviour Of The Wheel-Rail Interface. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Abdusslam, S.A., Ahmed, Mahmud, Raharjo, Parno, Gu, Fengshou and Ball, Andrew (2011) Time Encoded Signal Processing and Recognition of Incipient Bearing Faults. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Arebi, Lufti, Gu, Fengshou, Hu, Niaoqin and Ball, Andrew (2011) Misalignment Detection using a Wireless Sensor Mounted on a Rotating Shaft. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management. COMADEM, Stavanger, Norway, pp. 1289-1299. ISBN 0954130723

Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2011) Monitoring Cavitation in Centrifugal Pumps using a Noninvasive Capacitance Sensor. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 875-883. ISBN 0954130723

Alwodai, Ahmed, Gu, Fengshou and Ball, Andrew (2011) Motor Current Signature Analysis of a Variable Speed Drive for Motor Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 884-892. ISBN 0954130723

Alwodai, Ahmed, Gu, Fengshou and Ball, Andrew (2011) Motor Current Signature Analysis of a Variable Speed Drive for Motor Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 884-892. ISBN 0954130723

Ahmed, Mahmud, Gu, Fengshou and Ball, Andrew (2011) Feature Selection and Fault Classification of Reciprocating Compressors using a Genetic Algorithm and a Probabilistic Neural Network. Journal of Physics: Conference Series, 305 (1). 012112. ISSN 1742-6596

Albarbar, A., Gu, Fengshou, Ball, Andrew and Starr, A. (2010) Acoustic monitoring of engine fuel injection based on adaptive filtering techniques. Applied Acoustics, 71 (12). pp. 1132-1141. ISSN 0003-682X

Albarbar, A., Gu, Fengshou and Ball, Andrew (2010) Diesel engine fuel injection monitoring using acoustic measurements and independent component analysis. Measurement, 43 (10). pp. 1376-1386. ISSN 0263-2241

Appadoo, Robin, Ball, Andrew and Gu, Fengshou (2010) Optimizing condition monitoring techniques applied to a three stage reciprocating compressor in a FMCG industry. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 185. ISBN 9781862180932

Arebi, Lufti, Gu, Fengshou and Ball, Andrew (2010) Rotor Misalignment Detection using a Wireless Sensor and a Shaft Encoder. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 6-13. ISBN 9781862180932

Arebi, Lufti, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Investigation of Wireless Sensor Deployed on a Rotating Shaft and Its Potential for Machinery Condition Monitoring. In: 23rd International Congress on Condition Monitoring and diagnostic Engineering Management, June 28-July 2, 2010, Japan. (Unpublished)

Arebi, Lufti, Gu, J., Ball, Andrew and Gu, Fengshou (2010) Investigation of a Rotating Shaft with a Novel Integrated Wireless Accelerometer. In: The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England, UK.

Al-Arbi, Salem, Talbot, Chris J., Wang, Tie, Fengshou, Gu and Ball, Andrew (2010) Characterization of vibration transmission paths for gearbox condition monitoring. In: Inter noise 2010 39th International congress on Noise Control Engineering, 13-16 June 2010, Lisbon, Portugal.

Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2010) Bearing fault diagnosis using time encoded signal processing and recognition. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2010) The monitoring of cavitation in centrifugal pumps based on the analysis of vibro-acoustic measurements. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2009) Bearing fault diagnosis based on vibration signals. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 93-98. ISBN 9781862180857

Al-Arbi, Salem, Gu, Fengshou, Guan, Luyang and Ball, Andrew (2009) Remotely gear condition monitoring using traditional signal processing techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 111-117. ISBN 9781862180857

Al-Arbi, Salem, Gu, Fengshou, Guan, Luyang, Ball, Andrew and Naid, A. (2009) Gearbox Fault Diagnosis based on Vibration Signals Measured Remotely. Key Engineering Materials, 413-41. pp. 175-180. ISSN 1013-9826

Abdusslam, S.A., Ball, Andrew and Gu, Fengshou (2008) Diagnosis and Prognosis of Machinery Health based on Advanced Intelligent Computations. In: University of Huddersfield Research Festival 2008, 25 Feb-13 March 2008, Huddersfield. (Unpublished)

Al-Hashmi, S., Gu, Fengshou, Li, Y., Ball, Andrew, Fen, Tao and Lui, Ke (2004) Cavitation Detection of a Centrifugal Pump Using Instantanous Angular Speed. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

Alshandoli, A. F. Saleh, Gu, Fengshou and Ball, Andrew (2004) Detection of Induction Motors Faults Using Instantaneous Phase Variation. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

Albarbar, A., Gennish, R., Gu, Fengshou and Ball, Andrew (2004) Lubricating Oil Condition Monitoring Using Vibration and Air-Borne Acoustic Measurements. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

B

Brethee, Khaldoon F., Zhen, Dong, Gu, Fengshou and Ball, Andrew D. (2017) Helical gear wear monitoring: Modelling and experimental validation. Mechanism and Machine Theory, 117. pp. 210-229. ISSN 0094-114X

Brethee, K., Gu, Fengshou and Ball, Andrew (2017) Monitoring of Water Contamination in Gearbox Lubricant Based on Vibration Analysis. In: COMADEM 2017, 10-13 July 2017, University of Central Lancaster, UK. (Unpublished)

Brethee, Khaldoon F., Gu, Fengshou and Ball, Andrew (2016) Frictional effects on the dynamic responses of gear systems and the diagnostics of tooth breakages. Systems Science & Control Engineering, 4 (1). pp. 270-284. ISSN 2164-2583

Brethee, Khaldoon F., Zhou, Xiaojun, Gu, Fengshou and Ball, Andrew (2016) Frictional Effects on the Diagnostics of Helical Gear Tooth Defects. In: IncoME 2016, 30th - 31st August 2016, Manchester Conference Centre, Manchester.

Brethee, Khaldoon F., Zhang, Ruiliang, Hamad, Naima, Gu, Fengshou and Ball, Andrew (2016) Influence of Lubricant Starvation on Gearbox Vibration Signatures for Condition Monitoring. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Ball, Andrew, Wang, Tian T., Tian, X. and Gu, Fengshou (2016) A robust detector for rolling element bearing condition monitoring based on the modulation signal bispectrum,. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Brethee, Khaldoon F., Gao, Jingwei, Ball, Andrew and Gu, Fengshou (2015) Analysis of Frictional Effects on the Dynamic Response of Gear Systems and the Implications for Diagnostics. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). IEEE. ISBN 978-0-9926801-0-7

Baqqar, Mabrouka, Tran, Van Tung, Gu, Fengshou and Ball, Andrew (2013) Comparison between adaptive neuro-fuzzy inference system and general regression neural networks for gearbox fault detection using motor operating parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 118-126. ISBN 9781862181212

Baqqar, Mabrouka, Tran, Van Tung, Gu, Fengshou and Ball, Andrew (2013) Gearbox fault detection using static data and adaptive neurofuzzy inference system. In: COMADEM 2013, 11th-13th June /2013, Helsinki, Finland.

Benghozzi, A., Shao, Y., Shi, Z., Gu, Fengshou and Ball, Andrew (2012) The Diagnosis of a Gearbox Transmission System Using Electrical Control Parameters. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. IEEE, Loughborough, UK, pp. 1-6. ISBN 9781908549006 / 9781467317221

Baqqar, Mabrouka, Wang, Tie, Ahmed, Mahmud, Gu, Fengshou, Lu, Joan and Ball, Andrew (2012) A General Regression Neural Network Model for Gearbox Fault Detection using Motor Operating Parameters. In: 18th International Conference On Automation And Computing (ICAC), 2012. IEEE, Cardiff, UK, pp. 584-588. ISBN 978-1-4673-1559-3

Berry, E., Kukla, Peter, Gu, Fengshou and Ball, Andrew (2004) Diesel engine pollutant prediction and remote vehicle monitoring Part I: The prediction of diesel engine smoke emission using neural networks. International Journal of COMADEM, 7 (4). ISSN 1363-7681

Baydar, N and Ball, Andrew (2003) Detection of gear failures via vibration and acoustic signals using wavelet transform. Mechanical Systems and Signal Processing, 17 (4). pp. 787-804. ISSN 0888-3270

Ball, Andrew, Gu, Fengshou and Yesilyurt, I. (2003) Gear tooth stiffness reduction measurement using modal analysis and its use in wear fault severity assessment of spur gears. NDT & E International, 36 (5). pp. 357-372. ISSN 0963-8695

Ball, Andrew, Gu, Fengshou and Liu, S (2002) The on-line detection of engine misfire at low speed using multiple feature fusion with fuzzy pattern recognition. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (5). pp. 391-402. ISSN 0954-4070

Baydar, N, Ball, Andrew and Payne, B.S. (2002) Detection of incipient gear failures using statistical techniques. IMA Journal of Management Mathematics, 13 (1). pp. 71-79. ISSN 1471-678X

Baydar, N, Ball, Andrew and Payne, Bradley (2002) Detection of incipient gear failures using statistical techniques. IMA Journal of Management Mathematics, 13 (1). pp. 71-79. ISSN 1471-678X

Baydar, N and Ball, Andrew (2001) A comparative study of acoustic and vibration signals in detection of gear failures using Wigner-Ville distribution. Mechanical Systems and Signal Processing, 15 (6). pp. 1091-1107. ISSN 0888-3270

Baydar, N and Ball, Andrew (2001) Detection of incipient tooth defect in helical gears using multivariate statistics. Mechanical Systems and Signal Processing, 15 (2). pp. 303-321. ISSN 0888-3270

Baydar, N and Ball, Andrew (2000) Detection of gear deterioration under varying load conditions by using the instantaneous power spectrum. Mechanical Systems and Signal Processing, 14 (6). pp. 907-921. ISSN 0888-3270

Ball, Andrew and Gu, Fengshou (1995) A Basis for the Vibration Monitoring of Diesel Fuel Injectors. Maintenance & Asset Management Journal, 10 (2). pp. 24-30. ISSN 1748-5290

Ball, Andrew (1994) Plant Monitoring and Diagnostics in a B. Eng. Degree Course. Maintenance & Asset Management Journal, 9 (1). pp. 12-18. ISSN 1748-5290

C

Chen, Zhi, Wang, T., Gu, Fengshou, Haram, Mansaf and Ball, Andrew (2012) Gear Transmission Fault Diagnosis Based on the Bispectrum Analysis of Induction Motor Current Signatures. Journal of Mechanical Engineering, 48 (21). pp. 84-90. ISSN 0577-6686

Charles, P., Sinha, Jyoti K., Gu, Fengshou and Ball, Andrew (2010) Application of novel polar representation method for monitoring minor engine condition variations. Mechanical Systems and Signal Processing, 24 (3). pp. 841-843. ISSN 0888-3270

Charles, Peter, Sinha, Jyoti K., Gu, Fengshou, Lidstone, Liam and Ball, Andrew (2009) Detecting the crankshaft torsional vibration of diesel engines for combustion related diagnosis. Journal of Sound and Vibration, 321 (3-5). pp. 1171-1185. ISSN 0022-460X

D

Duan, Wenbo, Gu, Fengshou, Dupère, Iain, Zhong, Shan and Ball, Andrew (2009) The Effects of Blockage on the Propagation of Acoustic Waves in the Liquid-Shell Coupled System. Key Engineering Materials, 413-41. pp. 327-333. ISSN 1013-9826

Desforges, M J, Jacob, P J and Ball, Andrew (2000) Fault detection in rotating machinery using kernel-based probability density estimation. International Journal of Systems Science, 31 (11). pp. 1411-1426. ISSN 0020-7721

E

Elforjani, Badradin, Xu, Yuandong, Brethee, Khaldoon F., Wu, Zhifei, Gu, Fengshou and Ball, Andrew (2017) Monitoring Gearbox Using a Wireless Temperature Node Powered by Thermal Energy Harvesting Module. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601

Elforjani, Badradin, Feng, Guojin, Gu, Fengshou and Ball, Andrew (2016) Energy Harvesting Based Wireless Sensor Nodes for The Monitoring Temperature of Gearbox. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Elbarghathi, Fathalla, Tian, Xiange, Tung Tran, Van, Gu, Fengshou and Ball, Andrew (2013) Multi-stages helical gearbox fault detection using vibration signal and Morlet wavelet transform adapted by information entropy difference. In: COMADEM 2013, 11-13 June 2013, Helsinki, Finland. (Submitted)

Elbarghathi, Fathalla, Wang, T., Zhen, Dong, Gu, Fengshou and Ball, Andrew (2012) Two Stage Helical Gearbox Fault Detection and Diagnosis based on Continuous Wavelet Transformation of Time Synchronous Averaged Vibration Signals. Journal of Physics: Conference Series, 364. 012083. ISSN 1742-6596

Elbarghathi, Fathalla, Ball, Andrew and Gu, Fengshou (2012) Two stage helical gearbox fault detection and diagnosis based on continuous wavelet transformation of time synchronous averaged vibration signals. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2011) Diesel engine lubricating oil condition and performance monitoring using acoustic emission measurements. In: 24th International Congress on Condition Monitoring and Diagnostics Engineering Management (COMADEM 2011), 30th May - 1st June 2011, Stavanger, Norway. (Unpublished)

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2010) Online Monitoring of Engine Oil Quality Based on AE Signal Analysis. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 116-123. ISBN 9781862180932

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2010) Diesel Engine Injector Faults Detection Using Acoustic Emissions Technique. Modern Applied Science, 44 (9). pp. 3-13. ISSN 1913-1844

Elamin, Fathi, Glikes, O., Gu, Fengshou and Ball, Andrew (2010) The Analysis of Acoustic Emission Signals from the Cylinder Head of a Diesel Engine for Fault Detection. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Detection of Diesel Engine Injector Faults Using Acoustic Emissions. In: COMADEM 2010: Advances in Maintenance and Condition Diagnosis Technologies towards Sustainable Society, 28th June-2nd July 2010, Nara, Japan. (Unpublished)

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Diesel Engine Valve Clearance Detection Using Acoustic Emission. Advances in Mechanical Engineering, 2010. ISSN 1687-8132

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2009) Detection of diesel engine valve clearance by acoustic emission. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 7-13. ISBN 9781862180857

Elhaj, M., Gu, Fengshou, Ball, Andrew, Albarbar, A., Al-Qattan, M. and Naid, A. (2008) Numerical Simulation and Experimental Study of a Two Stage Reciprocating Compressor for Condition Monitoring. Mechanical Systems and Signal Processing, 22 (2). pp. 374-389. ISSN 08883270

Elshanti, Ali, Shi, John Z., Badri, A, Gu, Fengshou and Ball, Andrew (2007) Model-based Fault Detection and Diagnosis of the Anti-lock Braking System. In: Second World Congress of Asset Management and the Fourth International Conference on Condition Monitoring (WCEAM), June 2007, Harrogate, UK.

El-Shtewi, Houssein F., Li, Yuhua, Gu, Fengshou and Ball, Andrew (2004) The Need for a Condition Monitoring Database Management System. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

F

Feng, Guojin, Zhao, H., Gu, Fengshou, Needham, Paul M. and Ball, Andrew (2017) Efficient implementation of envelope analysis on resources limited wireless sensor nodes for accurate bearing fault diagnosis. Measurement, 110. pp. 307-318. ISSN 0263-2241

Feng, Gao, Hu, Niaoqing, Mones, Z., Gu, Fengshou and Ball, Andrew (2016) An investigation of the orthogonal outputs from an on-rotor MEMS accelerometer for reciprocating compressor condition monitoring. Mechanical Systems and Signal Processing, 76-77. pp. 228-241. ISSN 0888-3270

Feng, Guojin, Zhen, Dong, Tian, Xiange, Gu, Fengshou and Ball, Andrew (2015) A Novel Method to Improve the Resolution of Envelope Spectrum for Bearing Fault Diagnosis Based on a Wireless Sensor Node. In: Vibration Engineering and Technology of Machinery. Springer, pp. 765-775. ISBN 978-3-319-09918-7

Feng, Guojin, Tian, Xiange, Gu, James Xi, Yang, Dingxin, Gu, Fengshou and Ball, Andrew (2014) An adaptive envelope analysis in a wireless sensor network for bearing fault diagnosis using fast kurtogram algorithm. In: Comadem 2014, 16th - 18th September 2014, Brisbane, Australia.

Feng, Guojin, Zhen, Dong, Aliwan, M., Gu, Fengshou and Ball, Andrew (2013) Investigation of Wireless Protocols for Remote Condition Monitoring. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 19-24. ISBN 9781862181212

Feng, G., Mustafa, A., Gu, J.X., Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) The Real-time Implementation of Envelope Analysis for Bearing Fault Diagnosis based on Wireless Sensor Network. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. ICAC 2013 . Brunel University, London, UK. ISBN 978-1908549082

Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Modelling acoustic emissions generated by sliding friction. Wear, 268 (5-6). pp. 811-815. ISSN 0043-1648

Fazenda, Bruno, Gu, Fengshou, Ball, Andrew and Guan, Luyang (2009) Noise source localisaton in a car environment. In: 8th International Conference on Damage Assessment of Structures, 3-5 August 2009, Beijing, China. (Unpublished)

Fan, Yibo, Gu, Fengshou and Ball, Andrew (2009) Acoustic Emission Monitoring of Mechanical Seals Using MUSIC Algorithm based on Higher Order Statistics. Key Engineering Materials, 413-41. pp. 811-816. ISSN 1013-9826

Fazenda, Bruno, Gu, Fengshou, Ball, Andrew and Gilkes, Oliver S. (2008) Acoustic diagnosis of driving belt physical condition in enclosures. In: INTER-NOISE 2008, the 37th International Congress and Exposition on Noise Control Engineering, 26-29 October 2008, Shanghai, China.

Fan, Yibo Edward, Shi, Zhanqun, Harris, Georgina, Gu, Fengshou and Ball, Andrew (2006) Monitoring the Lubrication Condition of Rolling Element Bearings Using the Acoustic Emission Technique. In: ASME 8th Biennial Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Torino, Italy. (Unpublished)

Fan, Yibo Edward, Gu, Fengshou and Ball, Andrew (2004) A Review of the Condition Monitoring of Mechanical Seals. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

G

Gu, Fengshou, Abdalla, Gaballa M., Zhang, Riliang, Xun, Haijun and Ball, Andrew (2014) A Novel Method for the Fault Diagnosis of a Planetary Gearbox based on Residual Sidebands from Modulation Signal Bispectrum Analysis. In: Comadem 2014, 16th - 18th September 2014, Brisbane, Australia.

Gu, Fengshou, Tian, Xiange, Chen, Zhi, Rehab, Ibrahim and Ball, Andrew (2014) Fault severity diagnosis of rolling element bearings based on kurtogram and envelope analysis. International journal of structural analysis & design, 1 (2). ISSN 2372 - 4102

Gu, Fengshou, Wang, T., Alwodai, Ahmed, Tian, Xiange, Shao, Yimin and Ball, Andrew (2014) A new method of accurate broken rotor bar diagnosis based on modulation signal bispectrum analysis of motor current signals. Mechanical Systems and Signal Processing. ISSN 0888-3270

Gu, Fengshou, Tian, Xiange, Chen, Zhi, Wang, Tie, Rehab, Ibrahim and Ball, Andrew (2014) Fault severity diagnosis of rolling element bearings based on kurtogram and envelope analysis. In: Proceedings of the International conference on advances in civil, Structural and Mechanical Engineering. Institute of Research Engineers and Doctors. ISBN 978-981-07-8859-9

Gu, Fengshou, Shao, Yimin, Naid, A. and Ball, Andrew (2011) Electrical motor current signal analysis using a modified bispectrum for fault diagnosis of downstream mechanical equipment. Mechanical Systems and Signal Processing, 25 (1). pp. 360-372. ISSN 0888-3270

Guan, Luyang, Fengshou, Gu, Fazenda, Bruno, Ball, Andrew, Yichun, Yang and Pengxiao, Teng (2009) DOA Estimation in Car for Abnormal Sound Localisation. In: 8th International Conference on Damage Assessment of Structures, 3-5 August 2009, Beijing, China. (Submitted)

Gu, Fengshou, Naid, A., Hu, Niaoqing, Shao, Yimin, Mishra, Rakesh, Stubbs, Christopher and Ball, Andrew (2009) Electrical Motor Current Signal Analysis using Modified Bispectrum for Fault Diagnosis of Reciprocating Compressors. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Guan, Luyang, Gu, Fengshou, Shao, Yimin, Mishra, Rakesh and Ball, Andrew (2009) Empirical Mode Decomposition Based Method for Fault Diagnosis in a Helical Gearbox. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Gu, Fengshou, Yesilyurt, I., Li, Yuhua, Harris, Georgina and Ball, Andrew (2006) An Investigation of the Effects of Measurement Noise in the Use of Instantaneous Angular Speed for Machine Diagnosis. Mechanical Systems and Signal Processing, 20 (6). pp. 1444-1460. ISSN 08883270

Gennish, R., Jiang, J, Albarbar, A., Harris, Georgina, Gu, Fengshou and Ball, Andrew (2006) Diesel Engine Combustion Monitoring Based on Acoustic Measurement of Exhaust Systems. In: ASME 8th Biennial Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Torino, Italy. (Unpublished)

Gu, Fengshou, Jiang, J, Ball, Andrew, Gennish, R. and Liu, K (2006) An Experimental Study of Acoustic Impedance Measurement for Engine Condition Monitoring. In: Spring Conference Futures in Acoustics, 3-4 April 2006, Southampton, UK. (Unpublished)

Gu, Fengshou, Ball, Andrew and Li, W (2000) The Condition Monitoring of Diesel Engines Using Acoustic Measurements-Part 1: Acoustic Characteristics of the Engine and Representation of the Acoustic Signals. SAE Technical Papers. ISSN 0148-7191

Gu, Fengshou, Ball, Andrew and Li, W (2000) The Condition Monitoring of Diesel Engines Using Acoustic Measurements-Part 2: Fault Detection and Diagnosis. SAE Technical Papers. ISSN 0148-7191

Gu, Fengshou, Jacob, P J and Ball, Andrew (1999) Non-parametric models in the monitoring of engine performance and condition: Part 2: non-intrusive estimation of diesel engine cylinder pressure and its use in fault detection. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 213 (2). pp. 135-143. ISSN 0954-4070

Gu, Fengshou and Ball, Andrew (1996) Automating the Diagnosis of Valve Faults in Reciprocating Compressors. Maintenance & Asset Management Journal, 11 (3). pp. 19-22. ISSN 1748-5290

Gu, Fengshou and Ball, Andrew (1996) Diesel injector dynamic modelling and estimation of injection parameters from impact response Part 1: modelling and analysis of injector impacts. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 210 (44). pp. 293-302. ISSN 0954-4070

Gu, Fengshou, Ball, Andrew and Rao, K K (1996) Diesel injector dynamic modelling and estimation of injection parameters from impact response part 2: prediction of injection parameters from monitored vibration. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 210 (44). pp. 303-312. ISSN 0954-4070

Gu, Fengshou and Ball, Andrew (1995) Use of the Smoothed Pseudo-Wigner-Ville Distribution. Maintenance & Asset Management Journal, 10 (2). pp. 16-23. ISSN 1748-5290

H

Hughes, Jack Bryan, Lazaridis, Pavlos, Glover, Ian and Ball, Andrew (2017) An Empirical Study of Link Quality Assessment in Wireless Sensor Networks applicable to Transmission Power Control Protocols. In: LAPC 2017, 13-13 November 2017, Loughborough, UK.

Hughes, Jack Bryan, Lazaridis, Pavlos, Glover, Ian and Ball, Andrew (2017) Opportunities for Transmission Power Control Protocols in Wireless Sensor Networks. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601

Hamomd, Osama, Alabied, Samir, Xu, Yuandong, Daraz, Alsadak, Gu, Fengshou and Ball, Andrew (2017) Vibration Based Centrifugal Pump Fault Diagnosis Based on Modulation Signal Bispectrum Analysis. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601

Hughes, Jack Bryan, Lazaridis, Pavlos, Glover, Ian and Ball, Andrew (2017) A Survey of Link Quality Properties Related to Transmission Power Control Protocols in Wireless Sensor Networks. In: 2017 23rd IEEE International Conference on Automation and Computing (ICAC). Institute of Electrical and Electronics Engineers Inc.. ISBN 9780701702618, 9780701702601

Haba, Usama, Shaeboub, Abdulkarim, Mones, Zainab, Gu, Fengshou and Ball, Andrew (2017) Diagnosis of Compound Faults in Reciprocating Compressors Based on Modulation Signal Bispectrum of Current Signals. In: IncoME-II 2017, 5-6 September 2017, The University of Manchester. (Unpublished)

Haba, U., Brethee, K., Hassin, O., Gu, Fengshou and Ball, Andrew (2017) Detection and Diagnosis of Reciprocating Compressor Faults Based on Modulation Signal Bispectrum Analysis of Vibrations. In: COMADEM 2017, 10-13 July 2017, University of Central Lancaster, UK. (Unpublished)

Hassin, Osama, Yao, Aiying, Gu, Fengshou and Ball, Andrew (2016) Journal bearing condition monitoring based on the modulation signal bispectrum analysis of vibrations. In: Proceedings of the International Conference on Power Transmissions 2016 (ICPT 2016). Taylor & Francis, pp. 907-912. ISBN 9781138032675

Hamad, Naima, Brethee, Khaldoon F., Gu, Fengshou and Ball, Andrew (2016) An Investigation of Electrical Motor Parameters in a Sensorless Variable Speed Drive for Machine Fault Diagnosis. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328

Haba, Usama, Feng, Guojin, Shaeboub, Abdulkarim, Peng, Xinyu, Gu, Fengshou and Ball, Andrew (2016) Detection and Diagnosis of Compound Faults in a Reciprocating Compressor based on Motor Current Signatures. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Hassin, Osama, Yao, Aiying, Wei, Nasha, Gu, Fengshou and Ball, Andrew (2016) Monitoring Oil Levels Of Journal Bearings Based On The Analysis Of Vibration Signals. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Hassin, Osama, Wei, Nasha, Towsyfyan, Hossein, Gu, Fengshou and Ball, Andrew (2015) Journal bearing lubrication monitoring based on spectrum cluster analysis of vibration signals. In: 28th International Congress of Condition Monitoring and Diagnostic Engineering Management (COMADEM 2015), 1st - 4th December 2015, Buenos Aires, Argentina.

He, Xiaocong, Zhao, Lun, Yang, Huiyan, Xing, Baoying, Wang, Yuqi, Deng, Chengjiang, Gu, Fengshou and Ball, Andrew (2014) Investigations of strength and energy absorption of clinched joints. Computational Materials Science, 94. pp. 58-65. ISSN 0927-0256

Hamed, M., Tesfa, Belachew, Fengshou, Gu and Ball, Andrew (2014) A study of the Suspension System for the Diagnosis of Dynamic Characteristics. In: Proceedings of the 20th International Conference on Automation and Computing (ICAC), 2014. ICAC (2014). IEEE, Cranfield, UK.

He, Xiaocong, Gu, Fengshou and Ball, Andrew (2014) A review of numerical analysis of friction stir welding. Progress in Materials Science, 65. pp. 1-66. ISSN 0079-6425

Hamomd, Osama, Tian, Xiange, Chen, Zhi, Abdulrahman, Albraik, Gu, Fengshou and Ball, Andrew (2014) A new method of vibration analysis for the diagnosis of impeller in a centrifugal pump. In: 21st International Congress on Sound and Vibration, 13th - 17th July, 2014, Beijing, China.

Hamed, M., Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2014) Effects of Tyre Pressure on Vehicle Suspension Performance. In: World Symposium on Mechanics Engineering & Applied Physics ( WSMAEP'14), 18th - 20th June 2014, Sousse, Tunisia. (Unpublished)

Hamomd, Osama, Ball, Andrew, Gu, Fengshou and Thobiani, F. (2013) Pump Rotor System Monitoring Based on Advanced Measurements and Analysis Techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 230. ISBN 9781862181212

Hamed, M., Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2013) A study of the influence of vehicle tyre pressure on suspension system response using a full car model. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 7-12. ISBN 9781862181212

He, Xiaocong, Gu, Fengshou and Ball, Andrew (2013) Fatigue Behaviour of Fastening Joints of Sheet Materials and Finite Element Analysis. Advances in Mechanical Engineering, 2013. pp. 1-9. ISSN 1687-8132

Hamed, M., Tesfa, Belachew, Aliwan, M., Li, G., Gu, Fengshou and Ball, Andrew (2013) The Influence of Vehicle Tyres Pressure on the Suspension System Response by Applying the Time-Frequency Approach. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. ICAC 2013 . Brunel University, London, UK. ISBN 978-1908549082

He, Xiao Cong, Zhen, Dong, Xing, Bao Ying, Zeng, Kai, Ding, Yan Fang, Gu, Fengshou and Ball, Andrew (2013) Free Vibration Measurements of Single-Lap Cantilevered SPR Beams. Applied Mechanics and Materials, 321-32. pp. 33-36. ISSN 1662-7482

He, Xiaocong, Baoying, Xing1, Kai, Zeng, Gu, Fengshou and Ball, Andrew (2013) Numerical and experimental investigations of self-piercing riveting. International Journal of Advanced Manufacturing Technology, 69 (1-4). pp. 715-721. ISSN 0268-3768

Haram, Mansaf, Wang, T., Gu, Fengshou and Ball, Andrew (2012) Electrical Motor Current Signal Analysis using a Modulation Signal Bispectrum for the Fault Diagnosis of a Gearbox Downstream. Journal of Physics: Conference Series, 364. 012050. ISSN 1742-6596

Hu, Niaoqing, Hu, Lei, Zhang, Xiaofei, Gu, Fengshou and Ball, Andrew (2012) Enhancement detection of characteristic signal using stochastic resonance by adding a harmonic excitation. Journal of Physics: Conference Series, 364. 012046. ISSN 1742-6596

He, Xiaocong, Gu, Fengshou and Ball, Andrew (2012) Recent development in finite element analysis of self-piercing riveted joints. The International Journal of Advanced Manufacturing Technology, 58 (5-8). pp. 643-649. ISSN 0268-3768

Haram, Mansaf, Wang, Tie, Gu, Fengshou and Ball, Andrew (2011) An Investigation of the Electrical Response of A Variable Speed Motor Drive for Mechanical Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 867-874. ISBN 0954130723

J

Jang, J., Gu, Fengshou, Gennish, R., Moore, Jonathan P., Harris, G. and Ball, Andrew (2008) Monitoring of Diesel Engine Combustions Based on the Acoustic Source Characterisation of the Exhaust System. Mechanical Systems and Signal Processing, 22 (6). pp. 1465-1480. ISSN 08883270

Jiang, Xiang, Gu, Fengshou and Ball, Andrew (2008) Automotive Diesel Engine Performance and Condition Monitoring using Downpipe Acoustic Waveform Analysis. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Jiang, J, Gennish, R., Gu, Fengshou, Ball, Andrew, Jiao, F, Tao, T, Li, X and Liu, K (2006) An Investigation of acoustic measurements in the exhaust system for diesel engine combustion monitoring. In: Structure health monitoring conference, 5-7 July 2006, Spain.

Jiang, Jian, Liu, Ke, Gu, Fengshou, Yin, Yao and Ball, Andrew (2006) An Investigation Into the Control of the Combustion Instability Using Acoustic Resonator for a Jet Engine. In: Dynamic Systems and Control, Parts A and B: Proceedings of the ASME 2006 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers (ASME), pp. 1531-1537. ISBN 0-7918-4768-3

Jacob, P J, Gu, Fengshou and Ball, Andrew (1999) Non-parametric models in the monitoring of engine performance and condition: Part 1: modelling of non-linear engine processes. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 213 (1). pp. 73-81. ISSN 0954-4070

Jacob, Phillip, Ingram, Sarah and Ball, Andrew (1996) FieldBus: The Basis for an Open Architecture Condition Monitoring Revolution. Maintenance & Asset Management Journal, 11 (5). pp. 3-9. ISSN 1748-5290

L

Li, Guoxing, Gu, Fengshou, Wang, Tie, Zhang, Ruiliang and Ball, Andrew (2017) A Dynamic Deformation based Lubrication Model between the Piston Rings and Cylinder Liner. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601

Li, Long, Wang, Guangbin, Deng, Wenhui, Tang, Xiaoli, Gu, Fengshou and Ball, Andrew (2017) The Identification of Shaft Current Induced Defects on Rolling Bearings in Wind Turbine Generators. Proceedings of the 23rd International Conference on Automation & Computing (University of Huddersfield, 7-8 September 2017).

Liu, Fulong, Gu, Fengshou, Ball, Andrew, Zhao, Yunshi and Peng, Bo (2017) The Validation of an ACS-SSI based Online Condition Monitoring for Railway Vehicle Suspension Systems using a SIMPACK Model. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017).

Lane, Mark, Shaeboub, Abdulkarim, Gu, Fengshou and Ball, Andrew (2017) Investigation of Reductions in Motor Efficiency and Power caused by Stator Faults when operated from an Inverter Drive under Open Loop and Sensorless Vector Modes. Systems Science & Control Engineering, 5 (1). pp. 361-379. ISSN 2164-2583

Li, Guoxing, Gu, Fengshou, Wang, Tie, You, Jianjun and Ball, Andrew (2017) Investigation into the Vibrational Responses of Cylinder Liners in an IC Engine Fueled with Biodiesel. Applied Sciences, 7 (7). p. 717. ISSN 2076-3417

Li, Guoxing, Gu, Fengshou, Wang, Tie, Yang, Tiantian and Ball, Andrew (2017) Investigation into the dynamic response of cylinder liners in an IC engine based on a validated finite-element model. Systems Science & Control Engineering, 5 (1). pp. 56-69. ISSN 2164-2583

Liu, Fulong, Gu, Fengshou, Zhao, Yunshi and Ball, Andrew (2016) A validation study of ACS-SSI for online condition monitoring of vehicle suspension systems. Vibroengineering Procedia, 10. pp. 369-375. ISSN 2345-0533

Lane, Mark, Shaeboub, Abdulkarim, Gu, Fengshou and Ball, Andrew (2016) Investigation of Reductions in Motor Efficiency caused by Stator Faults when operated from an Inverter Drive. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328

Li, Guoxing, Gu, Fengshou, Wei, Nasha, Xu, Yuandong and Ball, Andrew (2016) A validated finite element model for predicting dynamic responses of cylinder liners in an IC engine*. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328

Lane, M., Ashari, Djoni, Ball, Andrew and Gu, Fengshou (2015) Investigation of Motor Supply Signature Analysis to Detect Motor Resistance Imbalances. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). IEEE. ISBN 978-0-9926801-0-7

Liang, B., Iwnicki, S., Ball, Andrew and Young, A.E. (2015) Adaptive noise cancelling and time–frequency techniques for rail surface defect detection. Mechanical Systems and Signal Processing, 54-55. pp. 41-51. ISSN 08883270

Lane, Mark, Ashari, Djoni, Gu, Fengshou and Ball, Andrew (2015) Investigation of Motor Current Signature Analysis in Detecting Unbalanced Motor Windings of an Induction Motor with Sensorless Vector Control Drive. In: Vibration Engineering and Technology of Machinery. Springer, pp. 801-810. ISBN 978-3-319-09918-7

Li, Guoxing, Gu, Fengshou, Wang, Tie and Ball, Andrew (2013) The Potential Effects of Alternative Fuels on the Lubricating Condition of Compression-ignition Engines. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 233. ISBN 9781862181212

Liang, Bo, Iwnicki, Simon, Gao, Feng, Ball, Andrew, Tran, Van Tung and Cattley, Robert (2013) Railway Wheel Flat and Rail Surface Defect Detection by Time-frequency Analysis. Chemical Engineering Transactions, 33. pp. 745-750. ISSN 1974-9791

Lidstone, Liam, Gu, Fengshou and Ball, Andrew (2007) An Experimental Study of NOx Emissions for the Development of an Emission Analysis Tool. In: SAE 2007 Fuels and emissions conference proceedings. SAE, Washington D C, U.S.A..

Li, Yuhua, Gu, Fengshou, Harris, G., Ball, Andrew, Bennett, N and Travis, K (2005) The measurement of instantaneous angular speed. Mechanical Systems and Signal Processing, 19 (4). pp. 786-805. ISSN 0888-3270

Li, Yuhua, Gu, Fengshou, Harris, Georgina, Ball, Andrew, Bennett, Nick and Travis, Ken (2005) The measurement of instantaneous angular speed. Mechanical Systems and Signal Processing, 19 (4). pp. 786-805. ISSN 0888-3270

Liang, Bo, Iwnicki, S. and Ball, Andrew (2003) Asymmetrical stator and rotor faulty detection using vibration, phase current and transient speed analysis. Mechanical Systems and Signal Processing, 17 (4). pp. 857-869. ISSN 0888-3270

Liang, Bo, Payne, B.S., Ball, Andrew and Iwnicki, S. (2002) Simulation and fault detection of three-phase induction motors. Mathematics and Computers in Simulation, 61 (1). pp. 1-15. ISSN 0378-4754

Liu, S, Gu, Fengshou and Ball, Andrew (2002) The on-line detection of engine misfire at low speed using multiple feature fusion with fuzzy pattern recognition. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 216 (5). pp. 391-402. ISSN 0954-4070

Li, W, Gu, Fengshou, Ball, Andrew, Leung, A Y T and Phipps, C E (2001) A study of the noise from diesel engines using the independent component analysis. Mechanical Systems and Signal Processing, 15 (6). pp. 1165-1184. ISSN 0888-3270

Liang, Bo, Gu, Fengshou and Ball, Andrew (1996) A Preliminary Investigation of Valve Fault Diagnosis in Reciprocating Compressors. Maintenance & Asset Management Journal, 11 (2). pp. 2-8. ISSN 1748-5290

M

Mondal, Debanjan, Gu, Fengshou and Ball, Andrew (2019) Application of Minimum Entropy Deconvolution in Diagnosis of Reciprocating Compressor Faults Based on Airborne Acoustic Analysis. In: 16th International Conference on Condition Monitoring and Asset Management (CM 2019), 25-27 June 2019, Glasgow, UK.

Mondal, Debanjan, Sun, Xiuquan, Gu, Fengshou and Ball, Andrew (2018) A Study of Diagnosing Reciprocating Compressor Faults using EMD-entropy of the Airborne Acoustic Signals. In: Proceedings of 3rd International Conference on Maintenance Engineering. ShieldCrest Publishing, Coimbra, Portugal, pp. 293-307. ISBN 978-989-8200-17-4

Mones, Zainab, Zeng, Q., Hu, L., Tang, Xiaoli, Gu, Fengshou and Ball, Andrew (2017) Planetary Gearbox Fault Diagnosis Using an On-Rotor MEMS Accelerometer. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601

Muo, Ugonnaya E., Madamedon, Misan, Gu, Fengshou and Ball, Andrew (2017) Wavelet Packet Analysis and Empirical Mode Decomposition for the Fault Diagnosis of Reciprocating Compressors. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017).

Mones, Zainab, Feng, G., Ogbulaor, U.E., Wang, T., Gu, Fengshou and Ball, Andrew (2016) Performance evaluation of wireless MEMS accelerometer for reciprocating compressor condition monitoring. In: Power Engineering: Proceedings of the International Conference on Power Transmissions. ICPT (2016). Taylor & Francis, Chongqing, P.R. China, pp. 893-900. ISBN 978-1-138-03267-5

Madamedon, Misan, Gu, Fengshou, Aburass, Ali and Ball, Andrew (2016) Online Estimation of Engine Driveline Dynamic Properties. In: International Conference for Student on Applied engineering, 20-21st October 2016, Newcastle. (Unpublished)

Mostafa, Alghadhi, Andrew, Ball, Laszlo, Kollar, Rakesh, Mishra and Taimoor, Asim (2015) Drive Cycle Optimisation for Pollution Reduction. International Journal of Environmental Science and Development, 6 (10). pp. 727-731. ISSN 2010-0264

Moamar, Hamed, Tesfa, Belachew, Fengshou, Gu and Ball, Andrew (2014) Vehicle Suspension Performance Analysis Based on Full Vehicle Model for Condition Monitoring Development. In: VETOMAC-X 2014, 9-11th September 2014, University of Manchester, UK. (Unpublished)

Mishra, Rakesh, Gu, Fengshou, Fazenda, Bruno, Stubbs, Christopher and Ball, Andrew (2009) Measurement and Characterisation of Faults in the Intake System of a Turbocharged Engine Using a Directional Acoustic Probe. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

N

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modern techniques for condition monitoring of railway vehicle dynamics. Journal of Physics: Conference Series, 364. 012016. ISSN 1742-6596

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Review of control strategies used in modern railway vehicles. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 160. ISBN 978-1-86218-106-9

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew, Fengshou, Gu and Anyakwo, Arthur (2011) Predictive Control Strategies Used to Solve Challenges Related to Modern Railway Vehicles. In: 5th IET Conference on Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 29-30 November 2011, Derby Conference Centre, UK.

Naid, A., Gu, Fengshou, Shao, Yimin, Al-Arbi, Salem and Ball, Andrew (2009) Bispectrum Analysis of Motor Current Signals for Fault Diagnosis of Reciprocating Compressors. Key Engineering Materials, 413-41. pp. 505-511. ISSN 1013-9826

O

Ogbulafor, Ugonnaya E., Feng, Guojin, Mones, Zainab, Gu, Fengshou and Ball, Andrew (2017) Application of Wavelet Packet Transform and Envelope Analysis to Non-stationary Vibration Signals For Fault Diagnosis of a Reciprocating Compressor. In: First World Congress on Condition Monitoring - WCCM 2017, 13th-16th June 2017, ILEC Conference Centre, London. (Unpublished)

P

Pislaru, Crinela, Lane, Mark, Ball, Andrew and Gu, Fengshou (2012) Fault Detection of Gearbox from Inverter Signals Using Advanced Signal Processing Techniques. Journal of Physics: Conference Series, 364. 012080. ISSN 1742-6596

Payne, B.S., Gu, Fengshou, Webber, C J S and Ball, Andrew (2003) Componential coding in the condition monitoring of electrical machines Part 2: application to a conventional machine and a novel machine. Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science, 217 (8). pp. 901-915. ISSN 0954-4062

Payne, B.S., Husband, M. and Ball, Andrew (2002) Development of condition monitoring techniques for a transverse flux motor. In: International Conference on Power Electronics Machines and Drives. IET, pp. 139-144. ISBN 0-85296-747-0

Q

Qin, G., Gu, Fengshou, Xu, Yuandong, Liu, Fulong and Ball, Andrew (2017) Bogie Speed Estimation and Signal Source Separation via Rail Vibration Analysis. In: COMADEM 2017: 30th International Congress & Exhibition on Condition Monitoring and Diagnostic Engineering Management, Monday 10th - Thursday 13th July 2017, University of Central Lancashire, Preston. (Unpublished)

R

Rabeyee, Khalid, Xu, Yuandong, Alashter, Aisha, Gu, Fengshou and Ball, Andrew (2019) A Componential Coding Neural Network based Signal Modelling for Condition Monitoring. In: COMADEM 2019, 3-5 September 2019, University of Huddersfield. (Unpublished)

Rabeyee, Khalid, Xu, Yuandong, Alabied, Samir, Gu, Fengshou and Ball, Andrew (2019) Extraction of Information from Vibration Data using Double Density Discrete Wavelet Analysis for Condition Monitoring. In: Sixteenth International Conference on Condition Monitoring and Asset Management, 25-27 June 2019, The Principal Grand Central Hotel, Glasgow, UK. (Unpublished)

Rehab, Ibrahim, Tiana, Xiange, Hu, Niaoqing, Yan, Tianxiao, Zhang, Ruiliang, Gu, Fengshou and Ball, Andrew (2016) A study of two bispectral features from envelope signals for bearing fault diagnosis. In: IncoME 2016, 30th - 31st August 2016, Manchester Conference Centre, Manchester.

Rehab, Ibrahim, Tian, Xiange, Zhang, Ruiliang, Gu, Fengshou and Ball, Andrew (2016) A Study Of The Diagnostic Amplitude Of Rolling Bearing Under Increasing Radial Clearance Using Modulation Signal Bispectrum. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Retzer, Hermann, Stephenson, John, Mishra, Rakesh, Ball, Andrew and Schmidt, Karsten (2015) Brake tests to evaluate the human behaviour at different brake pedal characteristics. In: 28th International Congress of Condition Monitoring and Diagnostic Engineering Management and the 10th Regional Non-Destructive & Structural Testing Congress: COMADEM 2015 and X CORENDE, 1st-4th December 2015, Buenos Aires, Argentina. (Unpublished)

Rehab, Ibrahim, Tian, Xiange, Ball, Andrew and Gu, Fengshou (2015) A Study of Diagnostic Signatures of a Deep Groove Ball Bearing Based on a Nonlinear Dynamic Mode. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). IEEE. ISBN 978-0-9926801-0-7

Rehab, Ibrahim, Tian, Xiange, Gu, Fengshou and Ball, Andrew (2014) The fault detection and severity diagnosis of rolling element bearings using modulation signal bispectrum. In: Eleventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 10th - 12th June 2014, Manchester, UK.

Rehab, Ibrahim, Tian, Xiange, Gu, Fengshou and Ball, Andrew (2013) Roller element bearing fault detection and diagnosis based on an optimised envelope analysis. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 176-181. ISBN 9781862181212

Raharjo, Parno, Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2012) Vibro-Acoustic Characteristic of A Self Aligning Spherical Journal Bearing due to Eccentric Bore Fault. In: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK. (Unpublished)

Raharjo, Parno, Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2012) Vibro-Acoustic Characteristic of A Self Aligning Spherical Journal Bearing due to Eccentric Bore Fault. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK. (Unpublished)

Raharjo, Parno, Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2012) A Comparative Study of the Monitoring of a Self Aligning Spherical Journal using Surface Vibration, Airborne Sound and Acoustic Emission. Journal of Physics: Conference Series, 364. 012035. ISSN 1742-6596

Retzer, H., Mishra, Rakesh, Ball, Andrew and Schmidt, K. (2012) Fallback level concepts for conventional and by-wire automotive brake systems. Journal of Physics: Conference Series, 364. 012019. ISSN 1742-6596

Raharjo, Parno, Abdusslam, S.A., Gu, Fengshou, Wang, Tie and Ball, Andrew (2011) An Investigation of Acoustic Emission Responses of a Self Aligning Spherical Journal Bearing. In: The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM/MFPT 2011, 20th - 22nd June 2011, Cardiff, UK. (Unpublished)

Raharjo, Parno, Abdusslam, S.A., Wang, Tie, Gu, Fengshou and Ball, Andrew (2011) An Investigation of Acoustic Emission Responses of a Self Aligning Spherical Journal Bearing. In: The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM/MFPT 2011, 20th - 22nd June 2011, Cardiff, UK.

Raharjo, Parno, Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2010) Early Failure Detection and Diagnostics of High Speed Self Aligning Journal Bearing. In: COMADEM 2010, June 28-July 2 2010, Nara, Japan. (Unpublished)

Raharjo, Parno, Gu, J., Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Early Failure Detection and Diagnostics of Self-Aligning Journal Bearing through Vibro-acoustic Analysis. In: CM 2010 and MFPT 2010 The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, England. (Unpublished)

S

Shaeboub, Abdulkarim, Gu, Fengshou, Lane, Mark, Haba, Usama, Wu, Zhifei and Ball, Andrew (2017) Modulation signal bispectrum analysis of electric signals for the detection and diagnosis of compound faults in induction motors with sensorless drives. Systems Science & Control Engineering, 5 (1). pp. 252-267. ISSN 2164-2583

Shaeboub, Abdulkarim, Lane, Mark, Haba, Usama, Gu, Fengshou and Ball, Andrew (2016) Detection and Diagnosis of Compound Faults in Induction Motors Using Electric Signals from Variable Speed Drives. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). IEEE. ISBN 9781862181328

Smith, Ann, Gu, Fengshou and Ball, Andrew (2016) Maintaining model efficiency, avoiding bias and reducing input parameter volume in compressor fault classification. In: 2016 7th International Conference on Mechanical and Aerospace Engineering (ICMAE). IEEE, pp. 196-201. ISBN 978-1467388290

Smith, Ann, Gu, Fengshou and Ball, Andrew (2015) "Selection of Input Parameters for Multivariate Classifiersin Proactive Machine Health Monitoring by Clustering Envelope Spectrum Harmonics". Applied Mechanics and Materials, 798. pp. 308-313. ISSN 1662-7482

Shaeboub, Abdulkarim, Abusaad, Samieh, Hu, Niaoqing, Gu, Fengshou and Ball, Andrew (2015) Detection and Diagnosis of Motor Stator Faults using Electric Signals from Variable Speed Drives. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). IEEE. ISBN 978-0-9926801-0-7

Smith, Ann, Gu, Fengshou and Ball, Andrew (2015) Selection of Input Parameters for Multivariate Classifiers in Proactive Machine Health Monitoring by Clustering Envelope Spectrum Harmonics. In: 6th International Conference on Mechanical and Aerospace Engineering, 16th - 17th July 2015, Rome, Italy.

Selig, Michael, Ball, Andrew, Ash, J. and Schmidt, K. (2012) The influence of tyre contact patch and on the stopping distance of automotive vehicles. Journal of Physics: Conference Series, 364. 012014. ISSN 1742-6596

Selig, Michael, Shi, Zhanqun, Ball, Andrew and Schmidt, K. (2012) A modern diagnostic approach for automobile systems condition monitoring. Journal of Physics: Conference Series, 364. 012013. ISSN 1742-6596

Shao, Yimin, Liang, Jie, Gu, Fengshou, Chen, Zaigang and Ball, Andrew (2011) Fault Prognosis and Diagnosis of an Automotive Rear Axle Gear Using a RBF-BP Neural Network. Journal of Physics: Conference Series, 305 (1). 012063. ISSN 1742-6596

Shi, John Z., Legate, I., Gu, Fengshou, Fieldhouse, John D. and Ball, Andrew (2010) Prediction of antilock braking system condition with the vehicle stationary using a model-based approach. International Journal of Automotive Technology, 11 (3). pp. 363-373. ISSN 1229-9138

Shi, John Z., Gu, Fengshou, Lennox, Barry and Ball, Andrew (2009) A Grey-box Modelling and Its Application in Model-based Fault Detection. International Journal of COMADEM, 12 (1). pp. 21-30. ISSN 1363-7681

Shi, John Z., Legate, I., Gu, Fengshou, Fieldhouse, John D. and Ball, Andrew (2008) Model-based fault prediction of ABS system with vehicle stationary. In: Proceedings of the third world congress on engineering asset management and intelligent maintenance systems conference. Springer.

Shi, John Z., Elshanti, Ali, Gu, Fengshou and Ball, Andrew (2007) A Desk-top tutorial Demonstration of Model-based Fault Detection and Diagnosis. International Journal of COMADEM, 10 (4). pp. 23-31. ISSN 1363-7681

Shi, John Z., Higson, Andrew, Kidd, Moray, Gu, Fengshou and Ball, Andrew (2007) Fault Signal Extraction Using Deviation Energy in Frequency Domain. In: Second World Congress on Engineering Asset Management and the Fourth International Conference on Condition Monitoring, 11-14 June 2007, Harrogate, UK.

Shi, John Z., Gu, Fengshou, Goulding, Peter and Ball, Andrew (2007) Integration of multiple platforms for real-time remote model-based condition monitoring. Computers in Industry, 58 (6). pp. 531-538. ISSN 01663615

Shi, Zhanqun, Higson, Andrew, Zheng, Lin, Gu, Fengshou and Ball, Andrew (2006) Automatic Fault Detection Using a Model-Based Approach in the Frequency Domain. In: ASME 8th Biennial Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Torino, Italy. (Unpublished)

Sasi, Ahmed Y. Ben, Gu, Fengshou, Li, Yuhua and Ball, Andrew (2006) A validated model for the prediction of rotor bar failure in squirrel-cage motors using instantaneous angular speed. Mechanical Systems and Signal Processing, 20 (7). pp. 1572-1589. ISSN 08883270

Shi, John Z., Gu, Fengshou, Lennox, Barry and Ball, Andrew (2005) The development of an adaptive threshold for model-based fault detection of a nonlinear electro-hydraulic system. Control Engineering Practice, 13 (11). pp. 1357-1367. ISSN 0967-0661

Shi, Zhanqun, Gu, Fengshou, Lennox, Barry and Ball, Andrew (2005) The development of an adaptive threshold for model-based fault detection of a nonlinear electro-hydraulic system. Control Engineering Practice, 13 (11). pp. 1357-1367. ISSN 0967-0661

Starr, A and Ball, Andrew (2005) Systems integration in maintenance engineering. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (2). pp. 79-95. ISSN 0954-4089

Shi, Zhanqun, Fan, Yibo, Gu, Fengshou, Ali, Abdul-Hannan and Ball, Andrew (2004) Neural Network Modelling Applied for Model-Based Fault Detection. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

Shi, Zhanqun, Gu, Fengshou, Pietruszkiewicz, Robert and Ball, Andrew (2004) Remote Model-Based Condition Monitoring Applied to a Mechatronic Control System. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester. (Unpublished)

Sasi, Ahmed Yousef Ben, Gu, Fengshou, Payne, Bradley and Ball, Andrew (2004) Instantaneous angular speed monitoring of electric motors. Journal of Quality in Maintenance Engineering, 10 (2). pp. 123-135. ISSN 1355-2511

Sasi, A.B., Payne, B.S., Gu, Fengshou and Ball, Andrew (2001) The Exploitation of Instantaneous Angular Spped for Condition Monitoring of Electric Motors. In: Proceedings of the 14th International Congress on Condition Monitoring and Diagnostic Engineering Management, 4-6 September 2001, Manchester. (Unpublished)

T

Tian, Xiange, Xi Gu, James, Rehab, Ibrahim, Abdalla, Gaballa M., Gu, Fengshou and Ball, Andrew (2018) A robust detector for rolling element bearing condition monitoring based on the modulation signal bispectrum and its performance evaluation against the Kurtogram. Mechanical Systems and Signal Processing, 100. pp. 167-187. ISSN 0888-3270

Tian, Xiange, Gu, Fengshou, Rehab, Ibrahim, Abdalla, Gaballa and Ball, Andrew (2015) A robust fault detection method of rolling bearings using modulation signal bispectrum analysis. In: 28th International Congress of Condition Monitoring and Diagnostic Engineering Management (COMADEM 2015), 1st - 4th December 2015, Buenos Aires, Argentina.

Tian, Xiange, Abdallaa, Gaballa M., Rehab, Ibrahim, Gu, Fengshou and Ball, Andrew (2015) Diagnosis of Combination Faults in a Planetary Gearbox using a Modulation Signal Bispectrum based Sideband Estimator. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). IEEE. ISBN 978-0-9926801-0-7

Towsyfyan, Hossein, Wei, Nasha, Gu, Fengshou and Ball, Andrew (2015) Identification of lubrication Regimes in Mechanical Seals using Acoustic Emission for Condition Monitoring. In: The 54th Annual Conference ofThe British Institute of Non-Destructive Testing BINDT 2015, 8th - 10th September 2015, Telford, UK.

Towsyfyan, Hossein, Hassin, Osama, Gu, Fengshou and Ball, Andrew (2014) Characterization of Acoustic Emissions from Mechanical Seals for Fault Detection. In: The 53rd Annual Conference of The British Institute of Non-Destructive Testing September 2014 Manchester., 9-11 September 2014, The Palace Hotel, Manchester, UK.

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2014) NOx Emission Prediction Based on Measurement of in-Cylinder Pressure for CI Engine Running with Diesel and Biodiesel. International Journal of Automotive Engineering and Technologies, 3 (2). ISSN 2146-9067

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2014) Emission Characteristics of a CI Engine Running with a Range of Biodiesel Feedstocks. Energies, 7 (1). pp. 334-350. ISSN ISSN 1996-1073

Tian, Xiange, Feng, Guojin, Chen, Zhi, Albraik, Abdulrahman, Gu, Fengshou and Ball, Andrew (2014) The investigation of motor current signals from a centrifugal pump for fault diagnosis. In: Comadem 2014, 16th - 18th September 2014, Brisbane, Australia.

Towsyfyan, Hossein, Gu, Fengshou and Ball, Andrew (2013) A review of mechanical seals tribology and condition monitoring. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 200-205. ISBN 9781862181212

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2013) Emission Characteristics of CI Engine Running with Biodiesel. In: World Congress on Petrochemistry and Chemical Engineering, 18th - 20th November 2013, San Antonio, Texas, USA. (Unpublished)

Tran, Van Tung, Al Thobiani, Faisal and Ball, Andrew (2013) An Application to Transient Current Signal based Induction Motor Fault Diagnosis of Fourier-Bessel Expansion and Simplified Fuzzy ARTMAP. Expert Systems With Applications, 40 (13). pp. 5372-5384. ISSN 0957-4174

Towsyfyan, Hossein, Raharjo, Parno, Gu, Fengshou and Ball, Andrew (2013) Characterization of Acoustic Emissions from Journal Bearings for Fault Detection. In: NDT 2013, 10th-12th September 2013, Telford, UK.

Tian, Xiange, Wang, Tie, Chen, Zhi, Gu, Fengshou and Ball, Andrew (2013) A transient enhancement method for two-stage helical gearbox fault diagnosis based on ALE. Journal of Signal and Information Processing, 4 (3B). pp. 132-137. ISSN 2159-4481

Tran, Van Tung, Yang, Bo-Suk, Gu, Fengshou and Ball, Andrew (2013) Thermal Image Enhancement using Bi-dimensional Empirical Mode Decomposition in Combination with Relevance Vector Machine for Rotating Machinery Fault Diagnosis. Mechanical Systems and Signal Processing, 38 (2). pp. 601-614. ISSN 0888-3270

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2013) LHV Predication Models and LHV Effect on the Performance of CI Engine Running with Biodiesel Blends. Energy Conversion and Management, 71. pp. 217-226. ISSN 0196-8904

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2013) Combustion and Performance Characteristics of CI Engine Running with Biodiesel. Energy, 51 (1). pp. 101-115. ISSN 0360-5442

Tran, Van Tung, Cattley, Robert, Ball, Andrew and Liang, Bo (2013) Fault Diagnosis of Induction Motor Based on a Novel Intelligent Framework and Transient Current Signals. Chemical Engineering Transactions, 33. pp. 691-596. ISSN 1974-9791

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2012) Performance of CI Engines Fuelled with Biodiesel Blends during Transient Operations. In: Powertrain Modelling and Control Testing, Mapping and Calibration, 4th -6th September 2012, University of Bradford. (Unpublished)

Tesfa, Belachew, Horler, Greg, Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2012) A clamping force measurement system for monitoring the condition of bolted joints on railway track joints and points. Journal of Physics: Conference Series, 364 (1). 012021. ISSN 1742-6596

Tian, X., Gu, Fengshou, Zhen, Dong, Tran, Van Tung and Ball, Andrew (2012) A study on transient enhancement for fault diagnosis based on an active noise control system. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK. (Unpublished)

Tesfa, Belachew, Horler, Greg, Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2012) A clamping force measurement system for monitoring the condition of bolted joints on railway track joints and points. Journal of Physics: Conference Series, 364. 012021. ISSN 1742-6596

Tesfa, Belachew, Gu, Fengshou, Anyakwo, Arthur, Al Thobiani, Faisal and Ball, Andrew (2012) Prediction of metal pm emission in rail tracks for condition monitoring application. In: Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 5th IET Conference on. IET, London, pp. 1-6.

Treetrong, Juggrapong, Sinha, Jyoti K., Gu, Fengshou and Ball, Andrew (2012) Parameter Estimation for Electric Motor Condition Monitoring. Advances in Vibration Engineering, 11 (1). pp. 75-84. ISSN 0972-5768

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2012) Water Injection Effects on the Performance and Emission Characteristics of a CI Engine Operating with Biodiesel. Renewable Energy, 37 (1). pp. 333-344. ISSN 0960-1481

Tesfa, Belachew, Gu, Fengshou, Anyakwo, Arthur, Al Thobiani, Faisal and Ball, Andrew (2011) Prediction of metal pm emission in rail tracks for condition monitoring application. In: RCM 2011: The 5th IET conference on Railway Condition Monitoring and Non-Destructive Testing, 29-30 Nov 2011, Derby, UK. (Unpublished)

Tesfa, Belachew, Mishra, Rakesh, Zhang, Cuiping, Gu, Fengshou and Ball, Andrew (2011) NOx Prediction Based on Cylinder Pressure Measurement for Engine Emission Monitoring. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management. COMADEM, Norway, p. 212. ISBN 0954130723

Tesfa, Belachew, Mishra, Rakesh, Zhang, Cuiping, Gu, Fengshou and Ball, Andrew (2011) NOx Prediction Based on Cylinder Pressure Measurement for Engine Emission Monitoring. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 1330-1340. ISBN 0954130723

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2011) Combustion Characteristics of CI Engine Running with Biodiesel Blends. In: International Conference on Renewable Energies and Power Quality (ICREPQ'11), 13-15 April 2011, Las Palmas de Gran Canaria, Spain.

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Predicting specific gravity and viscosity of biodiesel fuels. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 38-44. ISBN 9781862180857

Treetrong, Juggrapong, Sinha, Jyoti K., Gu, Fengshou and Ball, Andrew (2009) Bispectrum of stator phase current for fault detection of induction motor. ISA Transactions, 48 (3). pp. 378-382. ISSN 0019-0578

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Transient process modeling for condition monitoring of compression ignition (CI) engine. In: Proceedings of the 12th EAEC European Automotive Congress 2009. European Automotive Congress. ISBN 9788096924387

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Condition Monitoring of CI engine running on Biodiesel using Transient Process. Key Engineering Materials, 413-14. pp. 495-503. ISSN 1013-9826

V

van Vuuren, Pieter A., Xu, Yuandong, Gu, Fengshou and Ball, Andrew (2017) Monitoring gearbox oil viscosity by means of motor current signal analysis. In: First World Congress on Condition Monitoring - WCCM 2017, 13th-16th June 2017, ILEC Conference Centre, London. (Unpublished)

W

Wang, Yanzhong, Tang, Wen, Chen, Yanyan, Wang, Tie, Li, Guoxing and Ball, Andrew (2017) Investigation into the meshing friction heat generation and transient thermal characteristics of spiral bevel gears. Applied Thermal Engineering, 119. pp. 245-253. ISSN 1359-4311

Wang, Ruichen, Gu, Fengshou, Cattley, Robert and Ball, Andrew (2016) Modelling, Testing and Analysis of a Regenerative Hydraulic Shock Absorber System. Energies, 9 (5). ISSN 1996-1073

Wang, Ruichen, Gao, Jingwei, Gu, Fengshou and Ball, Andrew (2016) Research on effect of gas-charged accumulator capacity on hydraulic regenerative shock absorber system. In: Energy and Mechanical Engineering: Proceedings of 2015 International Conference on Energy and Mechanical Engineering. World Scientific, pp. 765-774. ISBN 9789814749510

Wei, Nasha, Gu, Fengshou, Wang, Tie, Li, Guoxing, Xu, Yuandong, Yang, Longjie and Ball, Andrew (2015) Characterisation of Acoustic Emissions for the Frictional Effect in Engines using Wavelets based Multi-resolution Analysis. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). IEEE. ISBN 978-0-9926801-0-7

Wang, Ruichen, Chen, Zhi, Xun, Haijun, Schmidt, Karsten, Gu, Fengshou and Ball, Andrew (2014) Modelling and Validation of a Regenerative Shock Absorber System. In: The 20th International Conference on Automation and Computing (ICAC'14), 12-13 September 2014, Cranfield University Bedfordshire MK43 0AL UK. (Unpublished)

Wei, Nasha, Gu, Fengshou, Li, Guoxing, Wang, Tie and Ball, Andrew (2014) Characterising the friction and wear between the piston ring and cylinder liner based on acoustic emission analysis. In: 21st International Congress on Sound and Vibration, 13th - 17th July, 2014, Beijing, China.

Wei, Nasha, Ball, Andrew and Gu, Fengshou (2013) A Study of Alternative Fuels Potential Effects on the Combustion Engines using acoustic emission. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 239. ISBN 9781862181212

Wang, Ruichen, Cattley, Robert, Tian, X., Gu, Fengshou and Ball, Andrew (2013) A Valid Model of a Regenerative Hybrid Shock Absorber System. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 206-211. ISBN 9781862181212

Wang, R., Tran, Van Tung, Gu, Fengshou and Ball, Andrew (2013) An Investigation on Energy Recovery Analysis of Active Suspension System. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. ICAC 2013 . Brunel University, London, UK. ISBN 978-1908549082

Wang, R., Gu, Fengshou and Ball, Andrew (2012) Energy recovery system optimisation in automotives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 161. ISBN 978-1-86218-106-9

Webber, C J S, Payne, B.S., Gu, Fengshou and Ball, Andrew (2003) Componential coding in the condition monitoring of electrical machines Part 1: principles and illustrations using simulated typical faults. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 217 (8). pp. 883-899. ISSN 09544062

Wright, James, Kukla, Peter, Ball, Andrew, Gu, Fengshou and Bann, John (2003) A Novel Electrostatic Method of Ultrafine PM Control Suitable for Low Exhaust Temperature Applications. SAE Technical Papers. ISSN 0148-7191

Worden, K., Ball, Andrew and Tomlinson, G.R. (1999) Fault location in a framework structure using neural networks. Smart Materials and Structures, 2 (3). pp. 189-200. ISSN 0964-1726

X

Xu, Yuandong, Tang, Xiaoli, Gu, Fengshou, Ball, Andrew and Gu, James Xi (2017) Early Detection of Rolling Bearing Faults Using an Auto-correlated Envelope Ensemble Average. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017).

Xu, Yuandong, Haiyang, Li, Zhen, Dong, Rehab, Ibrahim, Gu, Fengshou and Ball, Andrew (2017) Fault Detection of Rolling Bearings Using an Ensemble Average Autocorrelation Based Stochastic Subspace Identification. In: 24th international congress on sound and vibration, 23rd-27th July 2017, London. (Unpublished)

Xu, Yuandong, van Vuuren, Pieter A., Tan, Xiaoli, Gu, Fengshou and Ball, Andrew (2017) A Robust Method to Detect Faults of Rolling Bearings Using Ensemble Average Autocorrelation Based Stochastic Subspace Identification. In: COMADEM 2017: 30th International Congress & Exhibition on Condition Monitoring and Diagnostic Engineering Management, Monday 10th - Thursday 13th July 2017, University of Central Lancashire, Preston. (Unpublished)

Y

Yang, Dingxin, Gu, Fengshou, Feng, Guojing, Yang, Yongmin and Ball, Andrew (2015) Achieving high bit rate logical stochastic resonance in a bistable system by adjusting parameters. Chinese Physics B, 24 (11). p. 110502. ISSN 1674-1056

Yesilyurt, Isa and Ball, Andrew (1997) An Advanced Approach to the Bending Fatigue in Spur Gears. Maintenance & Asset Management Journal, 12 (4). pp. 28-34. ISSN 1748-5290

Z

Zeng, Qiang, Zainab, Mones, Shao, Yimin, Gu, Fengshou and Ball, Andrew (2017) Planetary Gear Fault Diagnosis Based on Instantaneous Angular Speed Analysis. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017).

Zhang, Ruiliang, Gu, Xi, Gu, Fengshou, Wang, Tie and Ball, Andrew (2017) Gear wear process monitoring using a sideband estimator based on modulation signal bispectrum. Applied Sciences, 7 (3). p. 274. ISSN 2076-3417

Zhang, Ruiliang, Gu, Fengshou, Mansaf, Haram, Wang, Tie and Ball, Andrew D. (2017) Gear wear monitoring by modulation signal bispectrum based on motor current signal analysis. Mechanical Systems and Signal Processing, 94. pp. 202-213. ISSN 08883270

Zhang, Xianlian, He, Xiaocong, Xing, Baoying, Zhao, Lun, Lu, Yi, Gu, Fengshou and Ball, Andrew (2016) Influence of heat treatment on fatigue performances for self-piercing riveting similar and dissimilar titanium, aluminium and copper alloys. Materials & Design, 97. pp. 108-117. ISSN 0264-1275

Zhen, Dong, Shi, Zhanqun, Song, Zhongyue, Gu, Fengshou and Ball, Andrew (2015) Combustion Noise Analysis for Combustion and Fuels Diagnosis of a CI Diesel Engine Operating with Biodiesels. Combustion Science and Technology. p. 150707092649006. ISSN 0010-2202

Zheng, Lin, Shi, Zhanqun and Ball, Andrew (2013) Vehicle Anti-lock Braking System Performance using dSPACE. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 1-6. ISBN 9781862181212

Zhen, Dong, Wang, Tie, Gu, Fengshou, Tesfa, Belachew and Ball, Andrew (2013) Acoustic measurements for the combustion diagnosis of diesel engines fuelled with biodiesels. Measurement Science and Technology, 24 (5). 055005. ISSN 0957-0233

Zhen, Dong, Wang, T., Gu, Fengshou and Ball, Andrew (2013) Fault diagnosis of motor drives using stator current signal analysis based on dynamic time warping. Mechanical Systems and Signal Processing, 34 (1-2). pp. 191-202. ISSN 0888-3270

Zhen, Dong, Wang, T., Gu, Fengshou, Tran, Van Tung and Ball, Andrew (2012) Combustion Analysis of a CI Engine with Biodiesel Blends based on Vibro-Acoustic Measurement. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK. (Unpublished)

Zhen, Dong, Zhao, H.L., Gu, Fengshou and Ball, Andrew (2012) Phase-compensation-based dynamic time warping for fault diagnosis using the motor current signal. Measurement Science and Technology, 23 (5). 055601. ISSN 0957-0233

Zhang, Hongyu, Shi, Zhanqun, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2012) Stability Analysis of a Turbocharger Rotor System Supported on Floating Ring Bearings. Journal of Physics: Conference Series, 364. 012032. ISSN 1742-6596

Zhen, Dong, Tesfa, Belachew, Yuan, X., Wang, R., Gu, Fengshou and Ball, Andrew (2012) An investigation of the acoustic characteristics of a compression ignition engine operating with biodiesel blends. Journal of Physics: Conference Series, 364. 012015. ISSN 1742-6596

Zhen, Dong, Gu, Fengshou, Zhou, Xiaojun and Ball, Andrew (2011) Fault Signal Enhancement using Adaptive Filtering Techniques for Gearbox Monitoring. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 251-258. ISBN 0954130723

Zhen, Dong, Alibarbar, A., Zhou, X., Gu, Fengshou and Ball, Andrew (2011) Electrical Motor Current Signal Analysis using a Dynamic Time Warping Method for Fault Diagnosis. Journal of Physics: Conference Series, 305 (1). 012093. ISSN 1742-6596

Zhou, Xiaojun, Shao, Yimin, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2011) Gear Fault Signal Detection based on an Adaptive Fractional Fourier Transform Filter. Journal of Physics: Conference Series, 305 (1). 012022. ISSN 1742-6596

Zhang, Hao, Shi, Zhanqun, Gu, Fengshou and Ball, Andrew (2011) Modelling of Outer and Inner Film Oil Pressure for Floating Ring Bearing Clearance in Turbochargers. Journal of Physics: Conference Series, 305 (1). 012021. ISSN 1742-6596

Zhen, Dong, Gu, Fengshou and Ball, Andrew (2010) The Study of Acoustic Source Localization using a Small Microphone Array for Condition Monitoring. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 14-19. ISBN 9781862180932

Zhang, Hao, Shi, John Z., Gu, Fengshou and Ball, Andrew (2010) Bending vibration of an automotive turbocharger under the influence of rotor imbalance. In: CM 2010 and MFPT 2010 The 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England. (Unpublished)

Zhen, Dong, James, Gu, Tie, Wang, Fengshou, Gu and Ball, Andrew (2010) Diagnostic Feature Development based on Dynamic Time Warping of Dynamic Signals under Variable Machine Operating Condition. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK.

Zhen, Dong, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) A Study of Sound Source Characteristics in Active Noise Control and Fault Diagnosis. In: Inter noise 2010-39th International congress on Noise Control Engineering, 13-16 June 2010, Lisbon, Portugal. (Unpublished)

Zhang, H., Shi, John Z., Gu, Fengshou and Ball, Andrew (2010) The bending vibration of a turbocharger under the influence of rotor imbalance. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Zhang, H., Shi, John Z., Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2009) Model-based Fault Detection for a Turbocharger. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Zheng, Lin, Shi, John Z., Lidstone, Liam and Ball, Andrew (2007) Development of a Fault Prognostics Model for a Non-linear Control System using the Extended Kalman Filter. In: Second World Congress of Asset management and the Fourth International Conference on Condition Monitoring, 11th - 14th June 2007, Harrogate, UK.

Zheng, Lin, Shi, John Z. and Ball, Andrew (2007) Model-based Fault Detection for an Electro-hydraulic System Using Extended Kalman Filter. In: Second World Congress of Asset Management and the Fourth International Conference on Condition Monitoring, 11th - 14th June 2007, Harrogate, UK.