Search:
Computing and Library Services - delivering an inspiring information environment

Items where School is "School of Computing and Engineering > Diagnostic Engineering Research Centre > Energy, Emissions and the Environment Research Group"

Up a level
Export as [feed] RSS
[tool] Download Statistics
Jump to: 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1998 | 1996
Number of items at this level: 361.

2015

Abusaad, Samieh, Benghozzi, Ahmed, Smith, Ann, Gu, Fengshou and Ball, Andrew (2015) The Detection of Shaft Misalignments Using Motor Current Signals from a Sensorless Variable Speed Drive. In: Vibration Engineering and Technology of Machinery. Springer, pp. 173-182. ISBN 978-3-319-09918-7

Feng, Guojin, Zhen, Dong, Tian, Xiange, Gu, Fengshou and Ball, Andrew (2015) A Novel Method to Improve the Resolution of Envelope Spectrum for Bearing Fault Diagnosis Based on a Wireless Sensor Node. In: Vibration Engineering and Technology of Machinery. Springer, pp. 765-775. ISBN 978-3-319-09918-7

Lane, Mark, Ashari, Djoni, Gu, Fengshou and Ball, Andrew (2015) Investigation of Motor Current Signature Analysis in Detecting Unbalanced Motor Windings of an Induction Motor with Sensorless Vector Control Drive. In: Vibration Engineering and Technology of Machinery. Springer, pp. 801-810. ISBN 978-3-319-09918-7

2014

Ahmed, M., Smith, Ann, Gu, Fengshou and Ball, Andrew (2014) Fault Diagnosis of Reciprocating Compressors Using Revelance Vector Machines with A Genetic Algorithm Based on Vibration Data. In: The 20th International Conference on Automation and Computing (ICAC'14), 12-13 September 2014, Cranfield University. (Unpublished)

Al-Braik, Abdulrahman, Hamomd, Osama, Gu, Fengshou and Ball, Andrew (2014) Diagnosis of Impeller Faults in a Centrifugal Pump Using Vibration Signals. In: Eleventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 10th - 12th June 2014, Manchester, UK.

Al-Obaidi, Ahmed, Pradhan, Suman, Asim, Taimoor, Mishra, Rakesh and Zala, Karina (2014) Numerical studies of the velocity distribution within the volute of a centrifugal pump. In: 27th International Congress of Condition Monitoring and Diagnostic Engineering Management, 16th - 18th September 2014, Brisbane, Australia. (Submitted)

Alghadhi, Mostafa, Ball, Andrew, Kollar, Laszlo, Mishra, Rakesh and Asim, Taimoor (2014) Fuel Consumption Tabulation in Laboratory Conditions. In: International Research Conference on Engineering, Science and Management, 4-5 June 2014, Dubai.

Freegah, Basim, Asim, Taimoor, Albarzenji, Dlir, Pradhan, Suman and Mishra, Rakesh (2014) Effect of the shape of connecting pipes on the performance output of a closed-loop hot water solar Thermo-syphon. In: 3rd International Workshop and Congress on eMaintenance, 17th - 18th June 2014, Lulea, Sweden.

Gu, Fengshou, Tian, Xiange, Chen, Zhi, Rehab, Ibrahim and Ball, Andrew (2014) Fault severity diagnosis of rolling element bearings based on kurtogram and envelope analysis. International journal of structural analysis & design, 1 (2). ISSN 2372 - 4102

Gu, Fengshou, Wang, T., Alwodai, Ahmed, Tian, Xiange, Shao, Yimin and Ball, Andrew (2014) A new method of accurate broken rotor bar diagnosis based on modulation signal bispectrum analysis of motor current signals. Mechanical Systems and Signal Processing. ISSN 0888-3270

Hamed, M., Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2014) Effects of Tyre Pressure on Vehicle Suspension Performance. In: World Symposium on Mechanics Engineering & Applied Physics ( WSMAEP'14), 18th - 20th June 2014, Sousse, Tunisia. (Unpublished)

He, Xiaocong, Zhao, Lun, Yang, Huiyan, Xing, Baoying, Wang, Yuqi, Deng, Chengjiang, Gu, Fengshou and Ball, Andrew (2014) Investigations of strength and energy absorption of clinched joints. Computational Materials Science. ISSN 09270256

Hussein, Hawre and Mishra, Rakesh (2014) A LabVIEW-based PI controller for controlling CE 105 coupled Tank System. In: CONTROL 2014 10th International Conference of Control, 9-11 July 2014, Loughborough University.

Jiang, Kuosheng, Xu, Guanghua, Liang, Lin, Tao, Tangfei and Gu, Fengshou (2014) The Recovery of Weak Impulsive Signals Based on Stochastic Resonance and Moving Least Squares Fitting. Sensors, 14 (8). pp. 13692-13707. ISSN 1424-8220

Malviya, Vihar and Mishra, Rakesh (2014) Development of an Analytical Multi-Variable Steady-State Vehicle Stability Model for Heavy Road Vehicles. Applied Mathematical Modelling. ISSN 0307-904X (In Press)

Othman, Aisha and Pislaru, Crinela (2014) Increasing the quality of student outcomes by using e-learning system in computer programming courses. In: Libya Higher Education Forum, 5th-6th June 2014, London, UK.

Othman, Aisha, Pislaru, Crinela and Impes, Ahmed (2014) Improving the Quality of Technology-Enhanced Learning for Computer Programming Courses. International Journal of Information and Education Technology, 4 (1). pp. 83-88. ISSN 2010-3689

Othman, Aisha, Pislaru, Crinela, Impes, Ahmed and Wilson, David (2014) Virtual Lab for Teaching a Computer Programming Course. In: International Conference on Communication, Media, Technology and Design, 24 - 26 April 2014, Istanbul, Turkey.

Rehab, Ibrahim, Tian, Xiange, Gu, Fengshou and Ball, Andrew (2014) The fault detection and severity diagnosis of rolling element bearings using modulation signal bispectrum. In: Eleventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 10th - 12th June 2014, Manchester, UK.

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2014) Emission Characteristics of a CI Engine Running with a Range of Biodiesel Feedstocks. Energies, 7 (1). pp. 334-350. ISSN ISSN 1996-1073

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2014) NOx Emission Prediction Based on Measurement of in-Cylinder Pressure for CI Engine Running with Diesel and Biodiesel. International Journal of Automotive Engineering and Technologies, 3 (2). ISSN 2146-9067

Xu, X., Xu, H., Deng, H., Gu, Fengshou and Talbot, Chris J. (2014) An investigation of a hypocycloid mechanism based twin-rotor piston engine. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN 0954-4062

2013

Abusaad, Samieh, Benghozzi, Ahmed, Shao, Yimin, Gu, Fengshou and Ball, Andrew (2013) Utilizing Data from a Sensorless AC Variable Speed Drive for Detecting Mechanical Misalignments. Key Engineering Materials, 569. pp. 465-472. ISSN 1013-9826

Alwodai, Ahmed, Wang, Tie, Chen, Zhi, Gu, Fengshou, Cattley, Robert and Ball, Andrew (2013) A Study of Motor Bearing Fault Diagnosis using Modulation Signal Bispectrum Analysis of Motor Current Signals. Journal of Signal and Information Processing, 4 (3B). pp. 132-137. ISSN 2159-4481

Asim, Taimoor, Mishra, Rakesh, Paris, Achilleos and Zala, Karina (2013) Optimal Design Methodology for On-shore Hydraulic Pipelines Transporting Spherical Capsules. Procedia CIRP: TESC 2013 - 2nd International Through-life Engineering Services Conference, 11. pp. 305-310. ISSN 2212 - 8271

Asim, Taimoor, Mishra, Rakesh and Ubbi, Kuldip (2013) Effect of the Shape of Stator Blades on the Performance Output of a Vertical Axis Marine Current Turbine. In: 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, 11-13 June 2013, Helsinki, Finland. (Submitted)

Asim, Taimoor, Mishra, Rakesh, Ubbi, Kuldip and Zala, Karina (2013) Computational Fluid Dynamics Based Optimal Design of Vertical Axis Marine Current Turbines. Procedia CIRP: TESC 2013 - 2nd International Through-life Engineering Services Conference, 11. pp. 323-327. ISSN 2212 - 8271

Asim, Taimoor, Sendanayake, Isuru, Mishra, Rakesh, Zala, Karina and Ubbi, Kuldip (2013) Effects of a Moving Surface Boundary Layer Control Device (MSBC) on the Drag Reduction in Heavy Commercial Vehicles. In: 40th National Conference on Fluid Mechanics & Fluid Power FMFP 2013, 12-14 December 2013, NIT Hamirpur, Himachal Pradesh, India.

Asim, Taimoor, Sendanayake, Isuru and Mishra, Shashwat (2013) Numerical Analysis of Atherosclerosis and Aneurysm in Carotid Bifurcations using Computational Fluid Dynamics. In: 40th National Conference on Fluid Mechanics & Fluid Power FMFP 2013, 12-14 December 2013, NIT Hamirpur, Himachal Pradesh, India.

Elbarghathi, Fathalla, Tian, Xiange, Tung Tran, Van, Gu, Fengshou and Ball, Andrew (2013) Multi-stages helical gearbox fault detection using vibration signal and Morlet wavelet transform adapted by information entropy difference. In: COMADEM 2013, 11-13 June 2013, Helsinki, Finland. (Submitted)

Freegah, Basim, Asim, Taimoor and Mishra, Rakesh (2013) Computational Fluid Dynamics based Analysis of a Closed Thermo-Siphon Hot Water Solar System. In: 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, 11-13 June 2013, Helsinki, Finland. (Unpublished)

Freegah, Basim, Asim, Taimoor and Mishra, Rakesh (2013) Effects of condenser volume on the performance of a solar thermo-syphon. In: Annual Researchers' ConferenceComputing & Engineering 2013 (CEARC'13), December 2013, University of Huddersfield, Huddersfield, UK.

Freegah, Basim, Asim, Taimoor and Mishra, Rakesh (2013) Numerical Analysis of a Closed Thermo-syphon Hot Water Solar System under Steady and Transient Loading Conditions. In: 40th National Conference on Fluid Mechanics & Fluid Power FMFP 2013, 12-14 December 2013, NIT Hamirpur, Himachal Pradesh, India.

He, Xiao Cong, Zhen, Dong, Xing, Bao Ying, Zeng, Kai, Ding, Yan Fang, Gu, Fengshou and Ball, Andrew (2013) Free Vibration Measurements of Single-Lap Cantilevered SPR Beams. Applied Mechanics and Materials, 321-32. pp. 33-36. ISSN 1662-7482

He, Xiaocong, Gu , Fengshou and Ball, Andrew (2013) Fatigue Behaviour of Fastening Joints of Sheet Materials and Finite Element Analysis. Advances in Mechanical Engineering, 2013. pp. 1-9. ISSN 1687-8132

Hu, Lei, Hu, Niaoqing, Zhang, Xinpeng, Gu, Fengshou and Gao, Ming (2013) Novelty detection methods for online health monitoring and post data analysis of turbopumps. Journal of Mechanical Science and Technology, 27 (7). pp. 1933-1942. ISSN 1738-494X

Johnson, Anthony and Mishra, Rakesh (2013) Sustainability principles and their integration into a higher education mechanical engineering undergraduate programme. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 218-223. ISBN 9781862181212

Johnson, Anthony and Mishra, Rakesh (2013) Total Design Control within the Sustainable Engineering Design Process. In: Proceedings of the IADIS International Conference Sustainability, Technology And Education. STE 2013 . IADIS - International Association for Development of the Information Society , Kuala Lumpur, Malaysia. ISBN 978-989-8704-00-9

Kenan, Thuraya, Pislaru, Crinela, Othman, Aisha and Elzawi, A. (2013) The social impact and cultural issues affecting the e-learning performance in Libyan Higher Education institutes. International Journal of Information Technology & Computer Science , 12 (1). pp. 50-56. ISSN 2091-1610

Kollar, László E., Mishra, Rakesh and Asim, Taimoor (2013) Particle size effects on optimal sizing and lifetime of pipelines transporting multi-sized solid-liquid mixtures. Procedia CIRP: TESC 2013 - 2nd International Through-life Engineering Services Conference, 11. pp. 317-322. ISSN 2212 - 8271

Marangwanda, Gilbert and Mishra, Rakesh (2013) Response surface optimization of a fluid regulating control valve. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 234. ISBN 9781862181212

Othman, Aisha, Impes, Ahmed and Pislaru, Crinela (2013) Online Interactive Module for Teaching a Computer Programming Course. In: Proceedings of the 12th European Conference on eLearning. ECEL 2013 . Academic Conferences and Publishing International Limited, Sophia Antipolis, France . ISBN 978-1-909507-82-1

Othman, Aisha, Pislaru, Crinela and Impes, Ahmed (2013) Determination of Skills Gap between school-Based Learning and Laboratory-Based Learning in Omar Al-Mukhtar University. International Journal of Social Science and Engineering , 7 (10).

Park, Kyooseon, Asim, Taimoor and Mishra, Rakesh (2013) Effect of Blade Faults on the Performance Characteristics of a Vertical Axis Wind Turbine. In: 26th International Congress of Condition Monitoring and Diagnostic Engineering Management, 11-13 June 2013, Helsinki, Finland. (Submitted)

Pradhan, Suman, Mishra, Rakesh, Ubbi, Kuldip and Asim, Taimoor (2013) Optimal design of a four-sensor probe system to measure the flow properties of the dispersed phase in bubbly air-water multiphase flows. Sensors and Actuators A: Physical, 201. pp. 10-22. ISSN 0924-4247

Shahzad, Atif, Asim, Taimoor, Mishra, Rakesh and Paris, Achilleos (2013) Performance of a Vertical Axis Wind Turbine under Accelerating and Decelerating Flows. Procedia CIRP: TESC 2013 - 2nd International Through-life Engineering Services Conference, 11. pp. 311-316. ISSN 2212 - 8271

Tesfa, Belachew (2013) Benefit of Grand Ethiopian Renaissance Dam Project (GERDP) for Sudan and Egypt. Discussion Paper. EIPSA Communicating Article: Energy, Water, Environment & Economic, Online.

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2013) Emission Characteristics of CI Engine Running with Biodiesel. In: World Congress on Petrochemistry and Chemical Engineering, 18th - 20th November 2013, San Antonio, Texas, USA. (Unpublished)

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2013) LHV Predication Models and LHV Effect on the Performance of CI Engine Running with Biodiesel Blends. Energy Conversion and Management, 71. pp. 217-226. ISSN 0196-8904

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2013) Combustion and Performance Characteristics of CI Engine Running with Biodiesel. Energy , 51 (1). pp. 101-115. ISSN 0360-5442

Tian, Xiange, Wang, Tie, Chen, Zhi, Gu, Fengshou and Ball, Andrew (2013) A transient enhancement method for two-stage helical gearbox fault diagnosis based on ALE. Journal of Signal and Information Processing, 4 (3B). pp. 132-137. ISSN 2159-4481

Ur Rehman, Atique, Shinde , Subhash, Singh, Vikas K, Paul, Akshoy R, Jain, Anuj and Mishra, Rakesh (2013) CFD based condition monitoring of centrifugal pumps. In: COMADEM 2013, 11-13 June 2013, Helsinki, Finland.

Zhen, Dong, Wang, T., Gu, Fengshou and Ball, Andrew (2013) Fault diagnosis of motor drives using stator current signal analysis based on dynamic time warping. Mechanical Systems and Signal Processing, 34 (1-2). pp. 191-202. ISSN 0888-3270

Zhen, Dong, Wang, Tie, Gu, Fengshou, Tesfa, Belachew and Ball, Andrew (2013) Acoustic measurements for the combustion diagnosis of diesel engines fuelled with biodiesels. Measurement Science and Technology, 24 (5). 055005. ISSN 0957-0233

2012

Abdusslam, S.A., Raharjo, Parno, Gu, Fengshou and Ball, Andrew (2012) Bearing defect detection and diagnosis using a time encoded signal processing and pattern recognition method. Journal of Physics: Conference Series, 364. 012036. ISSN 1742-6596

Ahmed, M., Gu, Fengshou and Ball, Andrew (2012) Fault Detection and Diagnosis using Principal Component Analysis of Vibration Data from a Reciprocating Compressor. In: 18th International Conference On Automation And Computing (ICAC), 2012. IEEE, Cardiff, UK, pp. 461-466. ISBN 978-1-4673-1559-3

Ahmed, M., Gu, Fengshou and Ball, Andrew (2012) Fault Detection of Reciprocating Compressors using a Model from Principles Component Analysis of Vibrations. Journal of Physics: Conference Series, 364. 012133. ISSN 1742-6596

Albraik, A., Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2012) Diagnosis of Centrifugal Pump Faults Using Vibration Methods. Journal of Physics: Conference Series, 364. 012139. ISSN 1742-6596

Alseddiqi, Mohamed, Mishra, Rakesh and Asim, Taimoor (2012) Development of an Extended Information Quality Framework for E-Learning System Content for Engineering Education Courses (EECs). In: Learning with Mobile Technologies, Handheld Devices, and Smart Phones: Innovative Methods. IGI Global, Hershey, PA, USA, pp. 162-170. ISBN 9781466609365

Alseddiqi, Mohamed, Mishra, Rakesh and Pislaru, Crinela (2012) An Evaluation Quality Framework for Analysing School-Based Learning (SBL) to Work-Based Learning (WBL) Transition Module. In: COMADEM 2012, 18th-20th June 2012, University of Huddersfield, UK.

Alseddiqi, Mohamed, Mishra, Rakesh and Pislaru, Crinela (2012) The New School-Based Learning (SBL) to Work-Based Learning (WBL) Transition Module: A Practical Implementation in the Technical and Vocational Education (TVE) System in Bahrain. In: COMADEM 2012, 18th-20th June 2012, University of Huddersfield, UK.

Alwodai, Ahmed, Gu, Fengshou and Ball, Andrew (2012) A Comparison of Different Techniques for Induction Motor Rotor Fault Diagnosis. Journal of Physics: Conference Series, 364. 012066. ISSN 1742-6596

Alwodai, Ahmed, Xia, X., Shao, Yimin, Gu, Fengshou and Ball, Andrew (2012) Modulation Signal Bispectrum Analysis of Motor Current Signals for Stator Fault Diagnosis. In: 18th International Conference on Automation and Computing (ICAC), 2012. IEEE, Loughborough, UK, pp. 1-6. ISBN 9781908549006

Anyakwo, Arthur, Pislaru, Crinela and Ball, Andrew (2012) A New Method for Modelling and Simulation of the Dynamic Behaviour of the Wheel-rail contact. International Journal of Automation and Computing, 9 (3). ISSN 1476-8186

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Dynamic simulation of a roller rig. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 51-56. ISBN 978-1-86218-106-9

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modelling and simulation of dynamic wheel-rail interaction using a roller rig. Journal of Physics: Conference Series, 364. 012060. ISSN 1742-6596

Arebi, Lufti, Gu, Fengshou and Ball, Andrew (2012) A comparative study of misalignment detection using a novel Wireless Sensor with conventional Wired Sensors. Journal of Physics: Conference Series, 364. 012049. ISSN 1742-6596

Ashari, Djoni, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Artificial intelligence-based condition monitoring for practical electrical drives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 143. ISBN 978-1-86218-106-9

Asim, Taimoor and Mishra, Rakesh (2012) Optimal Design of Capsule Transporting Pipeline carrying Spherical Capsules. Journal of Physics: Conference Series, 364 (1). 012070. ISSN 1742-6596

Asim, Taimoor, Mishra, Rakesh and Ido, Itoro (2012) Pressure Drop in Capsule Transporting Bends Carrying Spherical Capsules. Journal of Physics: Conference Series, 364 (1). 012068. ISSN 1742-6596

Asim, Taimoor, Mishra, Rakesh and Kollar, László E. (2012) Optimisation of a Horizontal Capsule Transporting Pipeline carrying Cylindrical Capsules. Journal of Physics: Conference Series, 364 (1). 012071. ISSN 1742-6596

Asim, Taimoor, Mishra, Rakesh, Nearchou, Anastasios and Ubbi, Kuldip (2012) Effect of the Length and Diameter of a Cylindrical Capsule on the Pressure Drop in a Horizontal Pipeline. Journal of Physics: Conference Series, 364 (1). 012069. ISSN 1742-6596

Asim, Taimoor, Mishra, Rakesh and Pradhan, Suman (2012) A Study on Optimal Sizing of Pipeline Transporting Equi-sized Particulate Solid-Liquid Mixture. Journal of Physics: Conference Series, 364 (1). 012072. ISSN 1742-6596

Asim, Taimoor, Mishra, Rakesh and Rao, Vasu (2012) Spatiotemporal Growth of Laminar Boundary Layers in a Concentric Annulus. In: Computing and Engineering Researchers’ Conference, March 2012, University of Huddersfield.

Baqqar, Mabrouka, Wang, Tie, Ahmed, Mahmud, Gu, Fengshou, Lu, Joan and Ball, Andrew (2012) A General Regression Neural Network Model for Gearbox Fault Detection using Motor Operating Parameters. In: 18th International Conference On Automation And Computing (ICAC), 2012. IEEE, Cardiff, UK, pp. 584-588. ISBN 978-1-4673-1559-3

Benghozzi, A., Shao, Y., Shi, Z., Gu, Fengshou and Ball, Andrew (2012) The Diagnosis of a Gearbox Transmission System Using Electrical Control Parameters. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. IEEE, Loughborough, UK, pp. 1-6. ISBN 9781908549006 / 9781467317221

Chen, Z., Wang, T., Zhao, Z., Shen, J., Zhen, D. and Gu, Fengshou (2012) The Lightweight Design of a Dump Truck Frame based on Dynamic Responses. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. IEEE, Loughborough, UK, pp. 1-5. ISBN 978-1-4673-1722-1

Chen, Zhi, Wang, T., Gu, Fengshou, Haram, Mansaf and Ball, Andrew (2012) Gear Transmission Fault Diagnosis Based on the Bispectrum Analysis of Induction Motor Current Signatures. Journal of Mechanical Engineering, 48 (21). pp. 84-90. ISSN 0577-6686

Elbarghathi, Fathalla, Ball, Andrew and Gu, Fengshou (2012) Two stage helical gearbox fault detection and diagnosis based on continuous wavelet transformation of time synchronous averaged vibration signals. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9

Elbarghathi, Fathalla, Wang, T., Zhen, Dong, Gu, Fengshou and Ball, Andrew (2012) Two Stage Helical Gearbox Fault Detection and Diagnosis based on Continuous Wavelet Transformation of Time Synchronous Averaged Vibration Signals. Journal of Physics: Conference Series, 364. 012083. ISSN 1742-6596

Fan, Bin, Hu, Niaoqing, Hu, Lei and Gu, Fengshou (2012) Application of Phase Space Warping on Damage Tracking for Bearing Fault. Journal of Physics: Conference Series, 364. 012025. ISSN 1742-6596

Green, J.R., Mishra, Rakesh, Charlton, M. and Owen, R. (2012) Local Analysis of Flow Conditions within a Geometrically Complex Control Valve Trim using CFD. Journal of Physics: Conference Series, 364. 012075. ISSN 1742-6596

Green, J.R., Mishra, Rakesh, Charlton, M. and Owen, R. (2012) Validation of CFD predictions using process data obtained from flow through an industrial control valve. Journal of Physics: Conference Series, 364. 012074. ISSN 1742-6596

Haram, Mansaf, Wang, T., Gu, Fengshou and Ball, Andrew (2012) Electrical Motor Current Signal Analysis using a Modulation Signal Bispectrum for the Fault Diagnosis of a Gearbox Downstream. Journal of Physics: Conference Series, 364. 012050. ISSN 1742-6596

Hassan, Mothana A., Jiang, Xiang and Haydn, Martin (2012) Fast surface metrology using wavelength scanning and dispersive white light interferometry. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 148. ISBN 978-1-86218-106-9

He, Xiaocong, Gu, Fengshou and Ball, Andrew (2012) Recent development in finite element analysis of self-piercing riveted joints. The International Journal of Advanced Manufacturing Technology, 58 (5-8). pp. 643-649. ISSN 0268-3768

Hu, Lei, Hu, Niaoqing, Fan, Bin and Gu, Fengshou (2012) Application of novelty detection methods to health monitoring and typical fault diagnosis of a turbopump. Journal of Physics: Conference Series, 364. 012128. ISSN 1742-6596

Hu, Niaoqing, Hu, Lei, Zhang, Xiaofei, Gu, Fengshou and Ball, Andrew (2012) Enhancement detection of characteristic signal using stochastic resonance by adding a harmonic excitation. Journal of Physics: Conference Series, 364. 012046. ISSN 1742-6596

Kenan, T. and Pislaru, Crinela (2012) Challenges related to e-learning implementation in higher education institutions in Libya. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 151. ISBN 978-1-86218-106-9

Kenan, T. and Pislaru, Crinela (2012) Challenges related to the implementation of e-learning in higher education institutions in Libya. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 116-122. ISBN 978-1-86218-106-9

Lin, Jinshan, Chen, Qian, Tian, Xiange and Gu, Fengshou (2012) Fault Diagnosis of Rolling Bearings using Multifractal Detrended Fluctuation Analysis and Mahalanobis Distance Criterion. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. IEEE, Loughborough, UK, pp. 1-6. ISBN 9781467317221

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modern techniques for condition monitoring of railway vehicle dynamics. Journal of Physics: Conference Series, 364. 012016. ISSN 1742-6596

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Review of control strategies used in modern railway vehicles. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 160. ISBN 978-1-86218-106-9

Park, Kyoo-seon, Asim, Taimoor and Mishra, Rakesh (2012) Computational Fluid Dynamics based Fault Simulations of a Vertical Axis Wind Turbines. Journal of Physics: Conference Series, 364 (1). 012138. ISSN 1742-6596

Park, Kyooseon, Asim, Taimoor and Mishra, Rakesh (2012) Simulation Based Approach to Predict Vertical Axis Wind Turbine Faults using Computational Fluid Dynamics. In: 1st International Conference on Through-life Engineering Services (TESConf 2012), 5th-6th November 2012, Bedfordshire, UK. (Submitted)

Park, Kyooseon, Asim, Taimoor, Mishra, Rakesh and Pradhan, Suman (2012) Condition Based Monitoring of Vertical Axis Wind Turbines using Computational Fluid Dynamics. In: Thirty Ninth National Conference on Fluid Mechanics and Fluid Power, 13th-15th December 2012, Surat, India. (Submitted)

Park, Kyooseon, Asim, Taimoor, Mishra, Rakesh, Shahzad, Atif and Marangwanda, Gilbert (2012) Computational Fluid Dynamics based Performance Optimisation of Vertical Axis Marine Current Turbines. In: 2nd International Workshop and Congress on eMaintenance, 13-14 December 2012, Lulea, Sweden. (Unpublished)

Pradhan, Suman and Mishra, Rakesh (2012) Experimental verification of the four-sensor probe model for flow diagnosis in air water flow in vertical pipe. Journal of Physics: Conference Series, 364. 012073. ISSN 1742-6596

Raharjo, Parno, Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2012) Vibro-Acoustic Characteristic of A Self Aligning Spherical Journal Bearing due to Eccentric Bore Fault. In: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies , 12th - 14th June 2012, London, UK. (Unpublished)

Raharjo, Parno, Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2012) Vibro-Acoustic Characteristic of A Self Aligning Spherical Journal Bearing due to Eccentric Bore Fault. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies , 12th - 14th June 2012, London, UK. (Unpublished)

Raharjo, Parno, Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2012) A Comparative Study of the Monitoring of a Self Aligning Spherical Journal using Surface Vibration, Airborne Sound and Acoustic Emission. Journal of Physics: Conference Series, 364. 012035. ISSN 1742-6596

Rao, Vasu, Mishra, Rakesh, Asim, Taimoor and Pradhan, Suman (2012) An Investigation on Ventilation Air distribution within Rectangular and Circular Enclosures. In: Thirty Ninth National Conference on Fluid Mechanics and Fluid Power, 13th-15th December 2012, Surat, India. (Submitted)

Retzer, H., Mishra, Rakesh, Ball, Andrew and Schmidt, K. (2012) Fallback level concepts for conventional and by-wire automotive brake systems. Journal of Physics: Conference Series, 364. 012019. ISSN 1742-6596

Selig, Michael, Ball, Andrew, Ash, J. and Schmidt, K. (2012) The influence of tyre contact patch and on the stopping distance of automotive vehicles. Journal of Physics: Conference Series, 364. 012014. ISSN 1742-6596

Selig, Michael, Shi, Zhanqun, Ball, Andrew and Schmidt, K. (2012) A modern diagnostic approach for automobile systems condition monitoring. Journal of Physics: Conference Series, 364. 012013. ISSN 1742-6596

Shahzad, Atif, Asim, Taimoor, Park, Kyooseon, Pradhan, Suman and Mishra, Rakesh (2012) Numerical Simulations of Effects of Faults in a Vertical Axis Wind Turbine’s Performance. In: 2nd International Workshop and Congress on eMaintenance, 13-14 December 2012, Lulea, Sweden. (Submitted)

Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Myers, Alan, Fletcher, Simon and Ford, Derek G. (2012) Analysis of complex interactions between mechanical elements using ansys and simulink. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 136-141. ISBN 978-1-86218-106-9

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2012) Performance of CI Engines Fuelled with Biodiesel Blends during Transient Operations. In: Powertrain Modelling and Control Testing, Mapping and Calibration, 4th -6th September 2012, University of Bradford. (Unpublished)

Tesfa, Belachew, Horler, Greg, Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2012) A clamping force measurement system for monitoring the condition of bolted joints on railway track joints and points. Journal of Physics: Conference Series, 364. 012021. ISSN 1742-6596

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2012) Water Injection Effects on the Performance and Emission Characteristics of a CI Engine Operating with Biodiesel. Renewable Energy, 37 (1). pp. 333-344. ISSN 0960-1481

Tian, X., Gu, Fengshou, Zhen, Dong, Tran, Van Tung and Ball, Andrew (2012) A study on transient enhancement for fault diagnosis based on an active noise control system. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies , 12th - 14th June 2012, London, UK. (Unpublished)

Treetrong, Juggrapong, Sinha, Jyoti K., Gu, Fengshou and Ball, Andrew (2012) Parameter Estimation for Electric Motor Condition Monitoring. Advances in Vibration Engineering, 11 (1). pp. 75-84. ISSN 0972-5768

Wang, R., Gu, Fengshou and Ball, Andrew (2012) Energy recovery system optimisation in automotives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 161. ISBN 978-1-86218-106-9

Zhang, Hongyu, Shi, Zhanqun, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2012) Stability Analysis of a Turbocharger Rotor System Supported on Floating Ring Bearings. Journal of Physics: Conference Series, 364. 012032. ISSN 1742-6596

Zhen, Dong, Tesfa, Belachew, Yuan, X., Wang, R., Gu, Fengshou and Ball, Andrew (2012) An investigation of the acoustic characteristics of a compression ignition engine operating with biodiesel blends. Journal of Physics: Conference Series, 364. 012015. ISSN 1742-6596

Zhen, Dong, Wang, T., Gu, Fengshou, Tran, Van Tung and Ball, Andrew (2012) Combustion Analysis of a CI Engine with Biodiesel Blends based on Vibro-Acoustic Measurement. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies , 12th - 14th June 2012, London, UK. (Unpublished)

Zhen, Dong, Zhao, H.L., Gu, Fengshou and Ball, Andrew (2012) Phase-compensation-based dynamic time warping for fault diagnosis using the motor current signal. Measurement Science and Technology, 23 (5). 055601. ISSN 0957-0233

2011

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Khalaf, Haifa and Alseddiqi, Mohamed (2011) Blended Learning Tools for Teaching and Training in Higher Order of Thinking Skills (HOTS) within Mechanical Engineering Education. In: COMADEM2011, the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management , 30th May -1st June 2011, Stavanger, Norway. (Unpublished)

Abdusslam, S.A., Ahmed, Mahmud, Raharjo, Parno, Gu, Fengshou and Ball, Andrew (2011) Time Encoded Signal Processing and Recognition of Incipient Bearing Faults. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Ahmed, Mahmud, Abdusslam, S.A., Baqqar, Mabrouka, Gu, Fengshou and Ball, Andrew (2011) Fault Classification of Reciprocating Compressor Based on Neural Networks and Support Vector Machines. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Ahmed, Mahmud, Gu, Fengshou and Ball, Andrew (2011) Feature Selection and Fault Classification of Reciprocating Compressors using a Genetic Algorithm and a Probabilistic Neural Network. Journal of Physics: Conference Series, 305 (1). 012112. ISSN 1742-6596

Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2011) Monitoring Cavitation in Centrifugal Pumps using a Noninvasive Capacitance Sensor. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 875-883. ISBN 0954130723

Alseddiqi, Mohamed and Mishra, Rakesh (2011) Development of a Two-Dimensional Model for Affective Domain Competencies in Engineering Courses. In: COMADEM2011, the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management , 30th May 1st June 2011, Stavanger, Norway. (Unpublished)

Alseddiqi, Mohamed and Mishra, Rakesh (2011) Measuring the effectiveness of an on-line school-to-work transition module. In: The International Conference on E-Learning in the Workplace ICELW 2011, 8th-10th June 2011, Columbia University, New York, USA.

Alsiddiqi, Mohamed, Mishra, Rakesh and Asim, Taimoor (2011) Development of an Extended Information Quality Framework for E-Learning System Content for Engineering Education Courses. In: International Conference on Education & Learning in Mobile Age 2011 CELMA'11, 1-2 June 2011, Windermere, Lake District, UK. (Submitted)

Alwodai, Ahmed, Gu, Fengshou and Ball, Andrew (2011) Motor Current Signature Analysis of a Variable Speed Drive for Motor Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 884-892. ISBN 0954130723

Alwodai, Ahmed, Gu, Fengshou and Ball, Andrew (2011) Motor Current Signature Analysis of a Variable Speed Drive for Motor Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 884-892. ISBN 0954130723

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2011) A Novel Approach To Modelling And Simulation Of The Dynamic Behaviour Of The Wheel-Rail Interface. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Asim, Taimoor, Mishra, Rakesh, Saqib, Muhammad and Ubbi, Kuldip (2011) Optimisation of a Capsule Transporting Pipeline Carrying Spherical Capsules. In: Maintenance Performance Measurement and Management 2011, 14-15 December 2011, Lulea, Sweden.

Asim, Taimoor, Mishra, Rakesh, Saqib, Muhammad and Ubbi, Kuldip (2011) Pressure Drop in Capsule Transporting Pipeline Carrying Spherical Capsules. In: 38th National Conference on Fluid Mechanics and Fluid Power, 15-17 December 2011, Bhopal, India.

Baqqar, Mabrouka, Ahmed, Mahmud and Gu, Fengshou (2011) Data Mining for Gearbox Condition Monitoring. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Colley, Gareth and Mishra, Rakesh (2011) Computational flow field analysis of a Vertical Axis Wind Turbine. In: International Conference on Renewable Energies and Power Quality (ICREPQ'11), 13-15 April 2011, Las Palmas de Gran Canaria, Spain. (Submitted)

Colley, Gareth and Mishra, Rakesh (2011) Performance characteristics of a Vertical Axis Wind Turbine (VAWT) under transient conditions. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management. COMADEM, Stavanger, Norway. ISBN 0954130723

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2011) Diesel engine lubricating oil condition and performance monitoring using acoustic emission measurements. In: 24th International Congress on Condition Monitoring and Diagnostics Engineering Management (COMADEM 2011), 30th May - 1st June 2011, Stavanger, Norway. (Unpublished)

Gu, Fengshou, Shao, Yimin, Naid, A. and Ball, Andrew (2011) Electrical motor current signal analysis using a modified bispectrum for fault diagnosis of downstream mechanical equipment. Mechanical Systems and Signal Processing, 25 (1). 360-372 . ISSN 0888-3270

Haram, Mansaf, Wang, Tie, Gu, Fengshou and Ball, Andrew (2011) An Investigation of the Electrical Response of A Variable Speed Motor Drive for Mechanical Fault Diagnosis. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 867-874. ISBN 0954130723

Hu, Niaoqing, Xia, Lurui, Gu, Fengshou and Qin, Guojun (2011) A Novel Transform Demodulation Algorithm for Motor Incipient Fault Detection. IEEE Transactions on Instrumentation and Measurement, 60 (2). pp. 480-487. ISSN 0018-9456

Hu, Lei, Hu, Niaoqing, Qin, Guojun and Gu, Fengshou (2011) Turbopump Condition Monitoring Using Incremental Clustering and One-class Support Vector Machine. Chinese Journal of Mechanical Engineering, 24 (3). pp. 474-489. ISSN 1000-9345

Ousey, Karen and Pislaru, Crinela (2011) E-learning used to develop an effective expertise of HE stakeholders. In: E-learning used to develop an effective expertise of HE stakeholders, 9th March 2011, University of Huddersfield. (Unpublished)

Raharjo, Parno, Abdusslam, S.A., Gu, Fengshou, Wang, Tie and Ball, Andrew (2011) An Investigation of Acoustic Emission Responses of a Self Aligning Spherical Journal Bearing. In: The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM/MFPT 2011, 20th - 22nd June 2011, Cardiff, UK. (Unpublished)

Raharjo, Parno, Abdusslam, S.A., Wang, Tie, Gu, Fengshou and Ball, Andrew (2011) An Investigation of Acoustic Emission Responses of a Self Aligning Spherical Journal Bearing. In: The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM/MFPT 2011, 20th - 22nd June 2011, Cardiff, UK.

Shao, Yimin, Liang, Jie, Gu, Fengshou, Chen, Zaigang and Ball, Andrew (2011) Fault Prognosis and Diagnosis of an Automotive Rear Axle Gear Using a RBF-BP Neural Network. Journal of Physics: Conference Series, 305 (1). 012063. ISSN 1742-6596

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2011) Combustion Characteristics of CI Engine Running with Biodiesel Blends. In: International Conference on Renewable Energies and Power Quality (ICREPQ'11), 13-15 April 2011, Las Palmas de Gran Canaria, Spain.

Tesfa, Belachew, Mishra, Rakesh, Zhang, Cuiping, Gu, Fengshou and Ball, Andrew (2011) NOx Prediction Based on Cylinder Pressure Measurement for Engine Emission Monitoring. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management. COMADEM, Norway, p. 212. ISBN 0954130723

Tesfa, Belachew, Mishra, Rakesh, Zhang, Cuiping, Gu, Fengshou and Ball, Andrew (2011) NOx Prediction Based on Cylinder Pressure Measurement for Engine Emission Monitoring. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 1330-1340. ISBN 0954130723

Zhang, Hao, Shi, Zhanqun, Gu, Fengshou and Ball, Andrew (2011) Modelling of Outer and Inner Film Oil Pressure for Floating Ring Bearing Clearance in Turbochargers. Journal of Physics: Conference Series, 305 (1). 012021. ISSN 1742-6596

Zhen, Dong, Alibarbar, A., Zhou, X., Gu, Fengshou and Ball, Andrew (2011) Electrical Motor Current Signal Analysis using a Dynamic Time Warping Method for Fault Diagnosis. Journal of Physics: Conference Series, 305 (1). 012093. ISSN 1742-6596

Zhen, Dong, Gu, Fengshou, Zhou, Xiaojun and Ball, Andrew (2011) Fault Signal Enhancement using Adaptive Filtering Techniques for Gearbox Monitoring. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). COMADEM, pp. 251-258. ISBN 0954130723

Zhou, Xiaojun, Shao, Yimin, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2011) Gear Fault Signal Detection based on an Adaptive Fractional Fourier Transform Filter. Journal of Physics: Conference Series, 305 (1). 012022. ISSN 1742-6596

2010

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2010) Learning and Teaching Mechanical Engineering Courses with Blended Learning Environment - Higher Order Application of Bloom’s Taxonomy. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 84-91. ISBN 9781862180932

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2010) Teachers’ Attitude towards Integration of Computer Assisted Instructions in Teaching and Learning Process in CAD/CAM/CNC Module. International Journal of Learning, 16 (12). pp. 137-147. ISSN 1447-9494

Abdulrasool, Salah Mahdi, Mishra, Rakesh and Khalaf, Haifa (2010) Teachers’ and Students' Attitudes Towards Traditional and Computer Assisted Blended Teaching and Learning Processes in Mechanical Engineering Subjects Area. In: Proceedings of the 10th IEEE International Conference on Computer and Information Technology. IEEE Computer Society Conference Publishing Services (CPS), pp. 1436-1441. ISBN 9780769541082

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Khalaf, Haifa and Al Seddiqi, Mohamed (2010) The Effect of Using Computer Technology Tools to Enhance the Teaching-Learning Process in CAD-CAM-CNC Module in Mechanical Engineering Subject Area. In: Global Learn Asia Pacific 2010: Global Conference on Learning and Technology. Association for the Advancement of Computing in Education (AACE), Vancouver, Canada, p. 9. ISBN 1-880094-79-7

Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2010) Bearing fault diagnosis using time encoded signal processing and recognition. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Ahmed, Mahmud and Gu, Fengshou (2010) Fault classification using an Artificial Neural Network based on Vibrations from a Reciprocating Compressor. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 92-97. ISBN 9781862180932

Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2010) The monitoring of cavitation in centrifugal pumps based on the analysis of vibro-acoustic measurements. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Al-Arbi, Salem, Talbot, Chris J., Wang, Tie, Fengshou, Gu and Ball, Andrew (2010) Characterization of vibration transmission paths for gearbox condition monitoring. In: Inter noise 2010 39th International congress on Noise Control Engineering, 13-16 June 2010, Lisbon, Portugal.

Albarbar, A., Gu, Fengshou and Ball, Andrew (2010) Diesel engine fuel injection monitoring using acoustic measurements and independent component analysis. Measurement, 43 (10). pp. 1376-1386. ISSN 0263-2241

Albarbar, A., Gu, Fengshou, Ball, Andrew and Starr, A. (2010) Acoustic monitoring of engine fuel injection based on adaptive filtering techniques. Applied Acoustics, 71 (12). pp. 1132-1141. ISSN 0003-682X

Alseddiqi, Mohamed and Mishra, Rakesh (2010) A Diagnostic study on the teaching and learning styles in engineering education. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 105-109. ISBN 9781862180932

Alseddiqi, Mohamed, Mishra, Rakesh and Abdulrasool, Salah Mahdi (2010) Developing an assessment strategy for school to work transition module: An example from Technical and Vocational Education(TVE) System in Bahrain. In: International Conference ICL 2010, September 15 -17, 2010, Hasselt, Belgium. (Unpublished)

Alseddiqi, Mohamed, Mishra, Rakesh and Abdulrasool, Salah Mahdi (2010) Improving Teaching and Learning Effectiveness in Engineering Education. The International Journal of Learning, 17 (9). pp. 11-26. ISSN 1447-9494

Alseddiqi, Mohamed, Mishra, Rakesh and Pislaru, Crinela (2010) Design and Development of an On-Line Work-Based Learning (WBL) Module to Enhance the Technical and Vocational Education (TVE) System in Bahrain. In: Global Learn Asia Pacific 2010: Global Conference on Learning and Technology. Association for the Advancement of Computing in Education (AACE), Vancouver, Canada, p. 1168. ISBN 1-880094-79-7

Appadoo, Robin, Ball, Andrew and Gu, Fengshou (2010) Optimizing condition monitoring techniques applied to a three stage reciprocating compressor in a FMCG industry. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 185. ISBN 9781862180932

Arebi, Lufti, Fan, Yibo, Gu , Fengshou and Ball, Andrew (2010) Investigation of Wireless Sensor Deployed on a Rotating Shaft and Its Potential for Machinery Condition Monitoring. In: 23rd International Congress on Condition Monitoring and diagnostic Engineering Management, June 28-July 2, 2010, Japan. (Unpublished)

Arebi, Lufti, Gu, Fengshou and Ball, Andrew (2010) Rotor Misalignment Detection using a Wireless Sensor and a Shaft Encoder. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 6-13. ISBN 9781862180932

Arebi, Lufti, Gu, J., Ball, Andrew and Gu, Fengshou (2010) Investigation of a Rotating Shaft with a Novel Integrated Wireless Accelerometer. In: The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England, UK.

Baqqar, Mabrouka, Gu, Fengshou and Lu, Joan (2010) Machine Performance and Condition Monitoring Through Data Mining and Database Optimization. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 186. ISBN 9781862180932

Colley, Gareth, Mishra, Rakesh, Rao, Vasu and Woolhead, R. (2010) Effect of rotor blade position on Vertical Axis Wind Turbine performance. Proceedings of the International Conference on Renewable Energies and Power Quality (ICREPQ’10) Granada (Spain), 23th to 25th March, 2010.

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Detection of Diesel Engine Injector Faults Using Acoustic Emissions. In: COMADEM 2010: Advances in Maintenance and Condition Diagnosis Technologies towards Sustainable Society, 28th June-2nd July 2010, Nara, Japan. (Unpublished)

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Diesel Engine Valve Clearance Detection Using Acoustic Emission. Advances in Mechanical Engineering, 2010. ISSN 1687-8132

Elamin, Fathi, Glikes, O., Gu, Fengshou and Ball, Andrew (2010) The Analysis of Acoustic Emission Signals from the Cylinder Head of a Diesel Engine for Fault Detection. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2010) Diesel Engine Injector Faults Detection Using Acoustic Emissions Technique. Modern Applied Science, 44 (9). pp. 3-13. ISSN 1913-1844

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2010) Online Monitoring of Engine Oil Quality Based on AE Signal Analysis. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 116-123. ISBN 9781862180932

Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Modelling acoustic emissions generated by sliding friction. Wear, 268 (5-6). pp. 811-815. ISSN 0043-1648

Kinnear, D., Mishra, Rakesh, Weston, Bill and Padgett, C. (2010) A Design Methodology for the Prediction of Squeeze Film Stiffness and Damping Characteristics in Hybrid Journal Bearings under Pulsatile Load Conditions. International Conference on Renewable Energies and Power Quality (ICREPQ’10) Granada (Spain), 23rd to 25th March, 2010.

Malviya, Vihar, Mishra, Rakesh and Palmer, Edward (2010) CFD Investigation on 3-Dimensional Interference of a Five-Hole Probe in an Automotive Wheel Arch. Advances in Mechanical Engineering, 2010. pp. 1-19. ISSN 1687-8132

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2010) Novel and efficient thermal error reduction strategy for machine tool performance improvement. In: University of Huddersfield Annual Research Festival School of Computing and Engineering 12th March 2010, Friday 12th March 2010, University of Huddersfield. (Unpublished)

Pillutla, G., Mishra, Rakesh, Barrans, Simon and Barrans, John (2010) Evaluation of Loss Coefficient For Stand Alone Radiator. In: International Conference on Renewable Energy and Power Quality (ICREPQ'10), 23rd - 25th March 2010, Granada .

Pislaru, Crinela (2010) Connected world - teaching and supervising home and international students. In: Active and Interactive Learning – Sharing Best Practices, 17th November 2010, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2010) Development of Lifelong Learning Skills by Embedding E-learning into the Curriculum. In: HUDCETT conference, 11th May 2010, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2010) Pedagogical Research Group - Present and Future. In: Computing and engineering research festival, 12th March 2010, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2010) Research and teaching - can you have your cake and eat it too? In: Teaching and Learning Conference 2010: Connect 2. Teaching, Learning, Research, Enterprise, 13 September 2010, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2010) Teaching and supervising home and international students. In: Active and Interactive Learning – Sharing Best Practices, 17th November 2010, University of Huddersfield. (Unpublished)

Pislaru, Crinela, Alseddiqi, Mohamed and Mishra, Rakesh (2010) Improving work based learning with E-learning systems. In: IET West Yorkshire Network Improving Work Based Learning with E-Learning systems, 10th February 2010, University of Huddersfield. (Unpublished)

Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, Simon and Pislaru, Crinela (2010) Off-line investigation of machine tool non-rigid errors. In: University of Huddersfield Annual Research Festival School of Computing and Engineering 12th March 2010, Friday 12th March 2010, University of Huddersfield. (Unpublished)

Raharjo, Parno, Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2010) Early Failure Detection and Diagnostics of High Speed Self Aligning Journal Bearing. In: COMADEM 2010, June 28-July 2 2010, Nara, Japan. (Unpublished)

Raharjo, Parno, Gu, J., Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Early Failure Detection and Diagnostics of Self-Aligning Journal Bearing through Vibro-acoustic Analysis. In: CM 2010 and MFPT 2010 The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, England. (Unpublished)

Shao, Yimin, Tu, Wenbing and Gu, Fengshou (2010) A Simulation Study of Defects in a Rolling Element Bearing using FEA. In: International Conference on Control, Automation and Systems 2010, 27th - 30th October 2010, Gyeonggi-do, Korea. (Unpublished)

Shi, John Z., Legate, I., Gu, Fengshou, Fieldhouse, John D. and Ball, Andrew (2010) Prediction of antilock braking system condition with the vehicle stationary using a model-based approach. International Journal of Automotive Technology, 11 (3). pp. 363-373. ISSN 1229-9138

Singh, D., Elamin, Fathi, Gu, Fengshou, Gilkes, Oliver S., Fieldhouse, John D., Jain, A.K., Singh, Nishan and Singal, S.K. (2010) Study of friction characteristics of a diesel engine running on different viscosity grade engine oils using conventional and acoustic emissions technique. In: 7th International Conference on Industrial Tribology (ICIT 2010), 2nd - 4th December 2010, Ranchi, India. (Unpublished)

Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Ford, Derek G., Myers, Alan and Poxton, Anthony (2010) Linking fed drive model with structural models for CNC machine tools. In: University of Huddersfield Annual Research Festival School of Computing and Engineering 12th March 2010, Friday 12th March 2010, University of Huddersfield. (Unpublished)

Tesfa, Belachew, Mishra, Rakesh and Gu, Fengshou (2010) Behavior of a CI Engine Running by Biodiesel under Transient Conditions. In: General Emisions. SAE Special Publication Papers SP, 2010 (2290). SAE International, Michigan, USA.

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Powles, Nicholas (2010) Prediction Models for Density and Viscosity of Biodiesel and their Effects on Fuel Supply System in CI Engines. Renewable Energy, 35 (12). pp. 2752-2760. ISSN 0960-1481

Wang, Jing, O'Grady, Michael, Xu, Qian and Xu, Zhijie (2010) Video Feature Representation and 3D Curve-based Event Matching. In: 16th International Conference on Automation and Computing (ICAC’10), University of Birmingham. (Unpublished)

Wang, Jing, Xu, Zhijie and O'Grady, Michael (2010) Head Curve Matching and Graffiti Detection. In: British Machine Vision Conference 2010, 31st August - 3rd September 2010, Aberystwyth, UK. (Unpublished)

Zhang, H., Shi, John Z., Gu, Fengshou and Ball, Andrew (2010) The bending vibration of a turbocharger under the influence of rotor imbalance. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK. (Unpublished)

Zhang, Hao, Shi, John Z., Gu, Fengshou and Ball, Andrew (2010) Bending vibration of an automotive turbocharger under the influence of rotor imbalance. In: CM 2010 and MFPT 2010 The 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England. (Unpublished)

Zhen, Dong, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) A Study of Sound Source Characteristics in Active Noise Control and Fault Diagnosis. In: Inter noise 2010-39th International congress on Noise Control Engineering, 13-16 June 2010, Lisbon, Portugal. (Unpublished)

Zhen, Dong, Gu, Fengshou and Ball, Andrew (2010) The Study of Acoustic Source Localization using a Small Microphone Array for Condition Monitoring. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 14-19. ISBN 9781862180932

Zhen, Dong, James, Gu, Tie, Wang, Fengshou, Gu and Ball, Andrew (2010) Diagnostic Feature Development based on Dynamic Time Warping of Dynamic Signals under Variable Machine Operating Condition. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK.

2009

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2009) Teacher Attitudes toward and Perceptions of Mechanical Engineering Student Performance on CAD/CAM/CNC. In: Learning: the sixteenth international conference on Learning, 1-4 July 2009, University of Barcelona, Spain. (Unpublished)

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2009) Using Computer Technology Tools to Improve the Teaching-Learning Process in Technical and Vocational Education: Mechanical Engineering Subject Area. International Journal of Learning, 15 (12). pp. 155-168. ISSN 1447-9494

Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2009) Bearing fault diagnosis based on vibration signals. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 93-98. ISBN 9781862180857

Al-Arbi, Salem, Gu, Fengshou, Guan, Luyang and Ball, Andrew (2009) Remotely gear condition monitoring using traditional signal processing techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 111-117. ISBN 9781862180857

Al-Arbi, Salem, Gu, Fengshou, Guan, Luyang, Ball, Andrew and Naid, A. (2009) Gearbox Fault Diagnosis based on Vibration Signals Measured Remotely. Key Engineering Materials, 413-41. pp. 175-180. ISSN 1013-9826

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Pislaru, Crinela, Myers, Alan and Briggs, Jack (2009) A high accuracy ultrasonic system for measurement of air temperature. In: Proceedings of the 9th International Conference - San Sebastian, Spain, 2009. EUSPEN, pp. 134-137. ISBN 978-0-9553082-6-0

Ali, Jafar, Fieldhouse, John D., Talbot, Chris J. and Mishra, Rakesh (2009) The diffusion of thermal discharge into stagnant water. In: Sixth international conference on flow dynamics, 4-6 November 2009, Sendai, Japan. (Unpublished)

Ali, Jafar, Fieldhouse, John D., Talbot, Chris J. and Mishra, Rakesh (2009) Thermal discharge of warm water into cooler stagnant water. In: What Where When: Multi-dimensional Advances for Industrial Process Monitoring. Proceedings. University of Leeds, Leeds, pp. 227-238.

Alseddiqi, Mohamed, Mishra, Rakesh and Pislaru, Crinela (2009) Identification of skills gap between school-based learning and work-based learning in technical and vocational education in Bahrain. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, UK, pp. 118-123. ISBN 9781862180857

Charles, Peter, Sinha, Jyoti K., Gu, Fengshou, Lidstone, Liam and Ball, Andrew (2009) Detecting the crankshaft torsional vibration of diesel engines for combustion related diagnosis. Journal of Sound and Vibration, 321 (3-5). pp. 1171-1185. ISSN 0022-460X

Colley, Gareth, Mishra, Rakesh, Rao, H.V. and Woolhead, R. (2009) Performance evaluation of three cross flow vertical axis wind turbine configurations. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 130-136. ISBN 9781862180857

Colley, Gareth, Mishra, Rakesh, Rao, Vasu and Woolhead, R. (2009) Effect of External Structures on Vertical Axis Wind Turbine Flow Field. Proceedings of the National Conference on Fluid Mechanics & Fluid Power, December 17-19,2009,College of Engineering,Pune.

Duan, Wenbo, Gu, Fengshou, Dupère, Iain, Zhong, Shan and Ball, Andrew (2009) The Effects of Blockage on the Propagation of Acoustic Waves in the Liquid-Shell Coupled System. Key Engineering Materials, 413-41. pp. 327-333. ISSN 1013-9826

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2009) Detection of diesel engine valve clearance by acoustic emission. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 7-13. ISBN 9781862180857

Fan, Yibo, Gu, Fengshou and Ball, Andrew (2009) Acoustic Emission Monitoring of Mechanical Seals Using MUSIC Algorithm based on Higher Order Statistics. Key Engineering Materials, 413-41. pp. 811-816. ISSN 1013-9826

Fazenda, Bruno, Gu, Fengshou, Ball, Andrew and Guan, Luyang (2009) Noise source localisaton in a car environment. In: 8th International Conference on Damage Assessment of Structures, 3-5 August 2009, Beijing, China. (Unpublished)

Gilkes, Oliver S., Mishra, Rakesh, Fieldhouse, John D. and Rao, Vasu (2009) Unsteady Interaction Of Turbocharger Compressor With IC Engine. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Gu, Fengshou, Naid, A., Hu, Niaoqing, Shao, Yimin, Mishra, Rakesh, Stubbs, Christopher and Ball, Andrew (2009) Electrical Motor Current Signal Analysis using Modified Bispectrum for Fault Diagnosis of Reciprocating Compressors. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Guan, Luyang, Fengshou, Gu, Fazenda, Bruno, Ball, Andrew, Yichun, Yang and Pengxiao, Teng (2009) DOA Estimation in Car for Abnormal Sound Localisation. In: 8th International Conference on Damage Assessment of Structures, 3-5 August 2009, Beijing, China. (Submitted)

Guan, Luyang, Gu, Fengshou, Shao, Yimin, Mishra, Rakesh and Ball, Andrew (2009) Empirical Mode Decomposition Based Method for Fault Diagnosis in a Helical Gearbox. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Malviya, Vihar, Mishra, Rakesh and Fieldhouse, John D. (2009) CFD Investigation of a Novel Fuel-Saving Device for Articulated Tractor-Trailer Combinations. Engineering Applications of Computational Fluid Mechanics, 3 (4). pp. 587-607. ISSN 1994-2060

Malviya, Vihar, Mishra, Rakesh and Fieldhouse, John D. (2009) Enhanced analytical vehicle stability model. In: Proceedings of the 12th EAEC European Automotive Congress 2009. EAEC. ISBN 9788096924387

Malviya, Vihar, Gundala, Naresh and Mishra, Rakesh (2009) Effect of cross wind on aerodynamic coefficients of ground vehicles. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 19-25. ISBN 9781862180857

Malviya, Vihar, Mishra, Rakesh and Gundala, Naresh (2009) CFD-Based Modelling of the Variation of Aerodynamic Coefficients with Wind Angle. In: Proceeding of National Conference on Fluid Mechanics & Fluid Power 17-19 December 2009. College of Engineering Pune, Pune, India.

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2009) Efficient Offline Thermal Modelling for Accurate Assessment of Machine Tool Thermal Behaviour. In: Laser Metrology and Machine Performance. Euspen, Euspen Headquarters, Cranfield University, pp. 9-18. ISBN 978-0-9553082-7-7

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2009) Efficient offline thermal error modelling strategy for accurate thermal behaviour assessment of the machine tool. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 26-32. ISBN 9781862180857

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2009) Novel and Efficient Thermal Error Reduction Strategy For Machine Tool Performance Improvement. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Mishra, Rakesh, Barrans, Simon and Pislaru, Crinela (2009) Imparting psychomotor skills to the learners using computer aided instructions in Engineering Education. In: V International Conference on Multimedia and Information and Communication Technologies in Education, 22-24 April 2009, Lisbon, Portugal. (Unpublished)

Mishra, Rakesh, Alseddiqi, Mohamed and Pislaru, Crinela (2009) An Improved Employability Skills Model and its Compliance Through Vocational Educational System in Bahrain. The International Journal of Learning, 16 (9). pp. 699-718. ISSN 1447-9494

Mishra, Rakesh, Alseddiqi, Mohamed and Pislaru, Crinela (2009) An improved employability skills model and its compliance through vocational educational system. In: Learning: the sixteenth international conference on Learning, 1-4 July 2009, University of Barcelona, Spain. (Unpublished)

Mishra, Rakesh, Gu, Fengshou, Fazenda, Bruno, Stubbs, Christopher and Ball, Andrew (2009) Measurement and Characterisation of Faults in the Intake System of a Turbocharged Engine Using a Directional Acoustic Probe. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

Naid, A., Gu, Fengshou, Shao, Yimin, Al-Arbi, Salem and Ball, Andrew (2009) Bispectrum Analysis of Motor Current Signals for Fault Diagnosis of Reciprocating Compressors. Key Engineering Materials, 413-41. pp. 505-511. ISSN 1013-9826

Palmer, Edward, Mishra, Rakesh and Fieldhouse, John D. (2009) An optimization study of a multiple-row pin-vented brake disc to promote brake cooling using computational fluid dynamics. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 223 (7). pp. 865-875. ISSN 0954-4070

Pillutla, G., Mishra, Rakesh, Barrans, Simon and Barrans, J (2009) Experimental and numerical prediction of airflow in a room - literature summary. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 172-177. ISBN 9781862180857

Pislaru, Crinela (2009) Optimisation of real-time implementation for high speed feed drives models. In: Lamdamap 9th International Conference, 30th June – 2nd July 2009, Brunel University. (Unpublished)

Pislaru, Crinela and Mishra, Rakesh (2009) Using VLEs to support student centred learning in control engineering education. In: 5th International Conference on Multimedia and Information Communication Technologies in education - m-ICTE2009 Conference, 22nd-24th April 2009, Lisbon, Portugal. (Unpublished)

Pislaru, Crinela (2009) Improving engineering by using an interactive multimedia learning environment. In: The sixteenth International Conference on Learning , 1st-4th July 2009, Barcelona, Spain.

Pislaru, Crinela (2009) Using blended learning to explain complex scientific notions. In: Teaching and Learning Conference 2009 - Inspire: Delivering inspiring teaching, Monday 14th September 2009, University of Huddersfield, UK. (Unpublished)

Pislaru, Crinela, Ford, Derek G. and Myers, Alan (2009) Novel condition monitoring technique used for improved CNC machine tool performance. In: Laser metrology and machine performance IX. Euspen, pp. 176-186. ISBN 9780955308277

Shi, John Z., Gu, Fengshou, Lennox, Barry and Ball, Andrew (2009) A Grey-box Modelling and Its Application in Model-based Fault Detection. International Journal of COMADEM, 12 (1). pp. 21-30. ISSN 1363-7681

Sztendel, S. and Pislaru, Crinela (2009) Developing mechatronic models of modern CNC machine tools for real-time implementation. In: Lamdamap 9th International Conference, 30th June – 2nd July 2009, Brunel University. (Unpublished)

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Transient process modeling for condition monitoring of compression ignition (CI) engine. In: Proceedings of the 12th EAEC European Automotive Congress 2009. European Automotive Congress . ISBN 9788096924387

Tesfa, Belachew, Mishra, Rakesh and Gu, Fengshou (2009) Performance of Compression Ignition (CI) Engine Running on Biodiesel during Transient Condition. In: Thirty Sixth National Conference on Fluid Mechanics and Fluid Power, 17- 19 December 2009, Pune, India.

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Condition Monitoring of CI engine running on Biodiesel using Transient Process. Key Engineering Materials, 413-14. pp. 495-503. ISSN 1013-9826

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Predicting specific gravity and viscosity of biodiesel fuels. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 38-44. ISBN 9781862180857

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Fieldhouse, John D. (2009) Investigation Of Transient Characteristics For Performance Improvement And Health Monitoring For a CI Engine Running Biodiesel. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Treetrong, Juggrapong, Sinha, Jyoti K., Gu, Fengshou and Ball, Andrew (2009) Bispectrum of stator phase current for fault detection of induction motor. ISA Transactions, 48 (3). pp. 378-382. ISSN 0019-0578

Wang, Jing, Xu, Zhijie, Pickering, Jonathan and Mishra, Rakesh (2009) Spatio-Temporal Volume Based Video Event Detection. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Zhang, H., Shi, John Z., Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2009) Model-based Fault Detection for a Turbocharger. In: Proceedings of COMADEM 2009. Condition Monitoring and Diagnostic Engineering Management (COMADEM). ISBN 9788493206468

2008

Abdusslam, S.A., Ball, Andrew and Gu, Fengshou (2008) Diagnosis and Prognosis of Machinery Health based on Advanced Intelligent Computations. In: University of Huddersfield Research Festival 2008, 25 Feb-13 March 2008, Huddersfield. (Unpublished)

Elhaj, M., Gu, Fengshou, Ball, Andrew, Albarbar, A., Al-Qattan, M. and Naid, A. (2008) Numerical Simulation and Experimental Study of a Two Stage Reciprocating Compressor for Condition Monitoring. Mechanical Systems and Signal Processing, 22 (2). pp. 374-389. ISSN 08883270

Fazenda, Bruno, Gu, Fengshou, Ball, Andrew and Gilkes, Oliver S. (2008) Acoustic diagnosis of driving belt physical condition in enclosures. In: INTER-NOISE 2008, the 37th International Congress and Exposition on Noise Control Engineering, 26-29 October 2008, Shanghai, China.

Gilkes, Oliver S., Mishra, Rakesh and Fieldhouse, John D. (2008) Simulation of the Transient Performance of a Turbocharged Diesel Engine Featuring a Two Point Air Injection Transient Assist System. Working Paper. SAE International, London, UK.

Gilkes, Oliver S., Mishra, Rakesh, Fieldhouse, John D. and Rao, H.V. (2008) Transient response of turbocharged diesel engine for transient operation using air injection assist system. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Jang, J., Gu, Fengshou, Gennish, R., Moore, Jonathan P., Harris, G. and Ball, Andrew (2008) Monitoring of Diesel Engine Combustions Based on the Acoustic Source Characterisation of the Exhaust System. Mechanical Systems and Signal Processing, 22 (6). pp. 1465-1480. ISSN 08883270

Jiang, Xiang, Gu, Fengshou and Ball, Andrew (2008) Automotive Diesel Engine Performance and Condition Monitoring using Downpipe Acoustic Waveform Analysis. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Malviya, Vihar, Mishra, Rakesh and Fieldhouse, John D. (2008) Comparative computational analysis of drag-reducing devices for tractor-trailers. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 1-8. ISBN 978-1-86218-067-3

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2008) Novel and efficient thermal error reduction strategy for machine tool performance improvement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 15-22. ISBN 978-1-86218-067-3

Mishra, Rakesh (2008) A model for the prediction of pressure drop in a two dimensional rectangular duct carrying a solid-liquid mixture. In: Bulk Europe 2008, 16th-17th October 2008, Prague, Czeck Republic. (Unpublished)

Myers, Alan, Pislaru, Crinela, Longstaff, Andrew P. and Fletcher, Simon (2008) Machine Tool Accuracy and Real-Time Control. In: Research Festival - School of Computing and Engineering Research Open Day, Friday 7th March 2008, University of Huddersfield. (Unpublished)

Palmer, Edward, Mishra, Rakesh, Bryant, David and Fieldhouse, John D. (2008) Analysis of air flow and heat dissipation from a high performance GT car front brake. In: SAE International Congress 2008, April 2008, Detroit USA.

Palmer, Edward, Mishra, Rakesh and Fieldhouse, John D. (2008) A computational fluid dynamic analysis on the effect of front row pin geometry on the aerothermodynamic properties of a pin-vented brake disc. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 222 (7). pp. 1231-1245. ISSN 0954-4070

Pislaru, Crinela (2008) E-learning based approach in support of Problem Based Learning. In: Teaching and Learning Conference 2008: Enhancing Learning: Technology by Design, 15th September 2008, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2008) The design of an interactive multimedia learning environment for flexible modern education. In: Teaching and Learning Conference 2008: Enhancing Learning: Technology by Design, 15th September 2008, University of Huddersfield. (Unpublished)

Pislaru, Crinela, Sztendel, S., Ford, Derek G. and Myers, Alan (2008) Real-time implementation of a novel transmission line matrix (TLM) model for high speed feed drives. In: MATAR 2008, 15th-18th September 2008, Prague University. (Unpublished)

Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, Simon and Pislaru, Crinela (2008) Simulation of the structural elements of a three axis VMC for machine tool error compensation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 23-27. ISBN 978-1-86218-067-3

Shi, John Z., Legate, I., Gu, Fengshou, Fieldhouse, John D. and Ball, Andrew (2008) Model-based fault prediction of ABS system with vehicle stationary. In: Proceedings of the third world congress on engineering asset management and intelligent maintenance systems conference. Springer.

Sztendel, S. and Pislaru, Crinela (2008) Development of control grafical user interface (GUI)for a dSPACE real-time system. In: Research Festival - School of Computing and Engineering Research Open Day, Friday 7th March 2008, University of Huddersfield. (Unpublished)

Sztendel, S., Pislaru, Crinela, Ford, Derek G. and Myers, Alan (2008) Development of experiment control graphical user interface for Hardware in the Loop (HIL) simulations. In: MATAR 2008, 15th-18th September 2008, Prague University. (Unpublished)

Wang, Jing, Xu, Zhijie, Pickering, Jonathan and Mishra, Rakesh (2008) An innovative volume based video feature extraction technique. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 110-116. ISBN 978-1-86218-067-3

2007

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Fieldhouse, John D., Ward, Steve and McComish, John (2007) Effectiveness of Computer Assisted Laboratory Instructions:Learning Outcomes Analysis. International Journal of Learning, 14 (8). pp. 197-209. ISSN 1447-9494

Chakraborty, A., Mishra, Rakesh and Majumdar, B. (2007) A computational approach to analyze the flow pattern in a Y-Duct due to different manoeuvring conditions. In: International Aerospace CFD Conference, 18th-19th June, 2007, Paris, France.

Elshanti, Ali, Shi, John Z., Badri, A, Gu, Fengshou and Ball, Andrew (2007) Model-based Fault Detection and Diagnosis of the Anti-lock Braking System. In: Second World Congress of Asset Management and the Fourth International Conference on Condition Monitoring (WCEAM), June 2007, Harrogate, UK.

Fieldhouse, John D., Bryant, David, Palmer, Edward and Mishra, Rakesh (2007) A study of the thermo-elastic effects of braking on high performance cars. In: 21st JUMV International Automotive Conference - Science and Motor Vehicles, 23-25th April 2007, Belgrade, Serbia.

Fieldhouse, John D. and Mishra, Rakesh (2007) Addressing the issues of increasing cultural diversity within an educational institution. In: The 2nd University of Huddersfield Teaching & Learning Conference, 14th September 2007, Huddersfield, UK. (Unpublished)

Gilkes, Oliver S., Mishra, Rakesh, Fieldhouse, John D. and Rao, Vasu (2007) Effectiveness of active and passive methods of improving transient response in turbocharged engine systems. In: 11th European Automotive Congress : Automobile for the future, 30 May - 1Sst June 2007, Budapest, Hungary. (Unpublished)

Gilkes, Oliver S., Mishra, Rakesh, Rao, H.V. and Fieldhouse, John D. (2007) Transient response of turbocharged diesel engine for transient operation using air injection assist system. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

Lidstone, Liam, Gu, Fengshou and Ball, Andrew (2007) An Experimental Study of NOx Emissions for the Development of an Emission Analysis Tool. In: SAE 2007 Fuels and emissions conference proceedings. SAE, Washington D C, U.S.A..

Malviya, Vihar, Mishra, Rakesh, Palmer, Edward and Majumdar, Bireswar (2007) CFD Based Analysis of the Effect of Multi-Hole Pressure Probe Geometry on Flow Field Interference. In: Fluid mechanics and Fluid Power. Birla Institute of Technology, pp. 113-122.

Malviya, Vihar, Mishra, Rakesh, Palmer, Edward and Majumdar, Bireswar (2007) Numerical analysis and optimisation of multi-hole pressure probe geometry. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-8.

Mishra, Rakesh and Rasool, S. A. (2007) A practical approach to increase learning effectiveness in engineering education: SHOCC approach. In: Learning Conference 2007, 26-29 June 2009, Johannesburg, South Africa. (Unpublished)

Odunze, N., Mishra, Rakesh and Reed, J. (2007) The CFD analysis of the effects of the size and location of an Air-Inlet in domestic kitchen extraction. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

Pislaru, Crinela (2007) Modern vibration analysis and correction practices. In: Modern vibration analysis and correction practices, Tuesday 6th March 2007, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2007) Sensors and condition monitoring practices. In: Getting The Most Out of Machinery Condition Monitoring - The Design, Development and Application of Sensors, Tuesday 13th March 2007, Birmingham, UK. (Unpublished)

Pislaru, Crinela, Ford, Derek G., Widiyarto, Muhammad Helmi Nur, Longstaff, Andrew P. and Myers, Alan (2007) Hardware-in-the-loop implementation of modern CNC machine tool feed drive models. In: 8th International LAMDAMAP Conference, 26 - 28 June 2007, Cardiff University.

Pislaru, Crinela, Widiyarto, Muhammad Helmi Nur, Ford, Derek G. and Myers, Alan (2007) Theoretical and experimental approach for the evaluation of structural dynamics of CNC machine tools. In: Lamdamap 2007 8th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, 25th June-28th June 2007, Cardiff University, Wales. (Unpublished)

Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, C. and Pislaru, Crinela (2007) Analysis and reduction of machine tool non-rigid errors. In: School of Computing and Engineering Annual Researchers’ Conference 2007, 14th December 2007, University of Huddersfield. (Unpublished)

Shi, John Z., Gu, Fengshou, Goulding, Peter and Ball, Andrew (2007) Integration of multiple platforms for real-time remote model-based condition monitoring. Computers in Industry, 58 (6). pp. 531-538. ISSN 01663615

Shi, John Z., Elshanti, Ali, Gu, Fengshou and Ball, Andrew (2007) A Desk-top tutorial Demonstration of Model-based Fault Detection and Diagnosis. International Journal of COMADEM, 10 (4). pp. 23-31. ISSN 1363-7681

Shi, John Z., Higson, Andrew, Kidd, Moray, Gu, Fengshou and Ball, Andrew (2007) Fault Signal Extraction Using Deviation Energy in Frequency Domain. In: Second World Congress on Engineering Asset Management and the Fourth International Conference on Condition Monitoring, 11-14 June 2007, Harrogate, UK.

Zheng, Lin, Shi, John Z. and Ball, Andrew (2007) Model-based Fault Detection for an Electro-hydraulic System Using Extended Kalman Filter. In: Second World Congress of Asset Management and the Fourth International Conference on Condition Monitoring, 11th - 14th June 2007, Harrogate, UK.

Zheng, Lin, Shi, John Z., Lidstone, Liam and Ball, Andrew (2007) Development of a Fault Prognostics Model for a Non-linear Control System using the Extended Kalman Filter. In: Second World Congress of Asset management and the Fourth International Conference on Condition Monitoring, 11th - 14th June 2007, Harrogate, UK.

2006

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2006) Computer Assisted Laboratory Instructions: Learning Outcomes Analysis. In: Proceedings of IV international conference on multimedia and information and communication technologies in communication. m-ICTE, Seville, Spain, pp. 330-341. ISBN 8469024698

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Fieldhouse, John D. and Ward, Steve (2006) Effectiveness of Parallel and Serial Integration of Teaching Resources in Laboratory Teaching in Engineering Education. International Journal of Learning, 13 (6). pp. 55-62. ISSN 1447-9494

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Fieldhouse, John D., Ward, Steve and McComish, John (2006) Effect of integration of computer simulations in traditional teaching methodology. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, UK, pp. 1-8.

Fieldhouse, John D., Palmer, Edward and Mishra, Rakesh (2006) Optimisation of pin shape and its configuration for a "PIN" type vented brake disc using CFD. In: FISITA 2006 World Automotive Congress, Yokohama, Japan.

Fieldhouse, John D., Bryant, David, Talbot, Chris J., Crampton, Andrew and Mishra, Rakesh (2006) The development of a design methodology to reduce the probability of brake judder and drone due to thermo-elastic instabilities of the brake rotor. In: FISITA World Automotive Congress 2006, Yokohama, Japan.

Gilkes, Oliver S. and Mishra, Rakesh (2006) Comparison of passive and active methods for improving transient performance of turbocharged engine systems. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Gilkes, Oliver S. and Mishra, Rakesh (2006) Computer simulation of air injection to the inlet manifold on turbocharged engines. In: FISITA World Student Congress, 2006, October 2006, Yokohama, Japan.

Gu, Fengshou, Yesilyurt, I., Li, Yuhua, Harris, Georgina and Ball, Andrew (2006) An Investigation of the Effects of Measurement Noise in the Use of Instantaneous Angular Speed for Machine Diagnosis. Mechanical Systems and Signal Processing, 20 (6). pp. 1444-1460. ISSN 08883270

Jiang, J, Gennish, R., Gu, Fengshou, Ball, Andrew, Jiao, F, Tao, T, Li, X and Liu, K (2006) An Investigation of acoustic measurements in the exhaust system for diesel engine combustion monitoring. In: Structure health monitoring conference, 5-7 July 2006, Spain.

Palmer, Edward, Mishra, Rakesh and Fieldhouse, John D. (2006) Analysis of air flow and heat dissipation from a high performance passenger car front brake rotor. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Pislaru, Crinela, Myers, Alan and Ford, Derek G. (2006) Methods for modelling and simulating the dynamic behaviour of CNC machine tool feed drives. In: EUSPEN 2006, 28th May - 1st June 2006, Baden bei Wien, Austria.

Pislaru, Crinela, Myers, Alan, Ford, Derek G. and Moreno-Castaneda, V.Y. (2006) Modelling the Dynamic Behaviour of CNC Machine Tool Feed Drives by Using a Novel 2D Transmission Line Model. In: EUSPEN 2006, 28th May- 1st June 2006, Baden bei Wien, Austria.

Sasi, Ahmed Y. Ben, Gu, Fengshou, Li, Yuhua and Ball, Andrew (2006) A validated model for the prediction of rotor bar failure in squirrel-cage motors using instantaneous angular speed. Mechanical Systems and Signal Processing, 20 (7). pp. 1572-1589. ISSN 08883270

Sperring, T. and Pislaru, Crinela (2006) COMONET – the DTI knowledge transfer network for condition monitoring sensors. In: The European Conference in Lubrication Management and Technology LUBMAT 2006, 14-16 June 2006, Preston, UK.

2005

Brennan, James K., Crampton, Andrew, Jiang, Xiang, Leach, Richard K. and Harris, Peter M. (2005) Reconstruction of continuous surface profiles from discretely sampled data. In: 5th euspen International Conference, 9th-12th May 2005, Montpellier, France. (Unpublished)

Gu, Fengshou, Jacob, P J and Ball, Andrew (2005) Non-parametric models in the monitoring of engine performance and condition: Part 2: non-intrusive estimation of diesel engine cylinder pressure and its use in fault detection. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 213 (2). pp. 135-143. ISSN 0954-4070

Jacob, P J, Gu, Fengshou and Ball, Andrew (2005) Non-parametric models in the monitoring of engine performance and condition: Part 1: modelling of non-linear engine processes. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 213 (1). pp. 73-81. ISSN 0954-4070

Li, Yuhua, Gu, Fengshou, Harris, G., Ball, Andrew, Bennett, N and Travis, K (2005) The measurement of instantaneous angular speed. Mechanical Systems and Signal Processing, 19 (4). pp. 786-805. ISSN 0888-3270

Lucas, Gary and Mishra, Rakesh (2005) Measurement of bubble velocity components in a swirling gas–liquid pipe flow using a local four-sensor conductance probe. Measurement Science and Technology, 16 (3). pp. 749-758. ISSN 0957-0233

Lucas, Gary, Wang, M. and Mishra, Rakesh (2005) Comparison of bubble velocity components in a swirling gas-liquid pipe flow using dual-plane EIT and a novel 4-sensor local probe. In: 4th World Congress on Industrial Process Tomography, 5 - 8 September 2005, Aizu, Japan. (Unpublished)

Moreno-Castaneda, V.Y., Pislaru, Crinela and Ford, Derek G. (2005) Modelling and simulation of the dynamic behaviour of a ball screw system using transmission line modelling technique. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Pislaru, Crinela, Ford, Derek G. and Moreno-Castaneda, V.Y. (2005) Modelling and simulation of CNC machine tool feed drives. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Pislaru, Crinela, Ford, Derek G., Widiyarto, Muhammad Helmi Nur and Myers, Alan (2005) Methods for modal parameters identification applied to CNC machine tool feed drives. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Shi, John Z., Gu, Fengshou, Lennox, Barry and Ball, Andrew (2005) The development of an adaptive threshold for model-based fault detection of a nonlinear electro-hydraulic system. Control Engineering Practice, 13 (11). pp. 1357-1367. ISSN 0967-0661

Starr, A and Ball, Andrew (2005) Systems integration in maintenance engineering. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 214 (2). pp. 79-95. ISSN 0954-4089

Widiyarto, Muhammad Helmi Nur, Pislaru, Crinela, Ford, Derek G., Longstaff, Andrew P. and Myers, Alan (2005) Hybrid modelling technique applied to digital feed drives. In: Proceedings of the 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. European Society for Precision Engineering and Nanotechnology, pp. 454-463. ISBN 1861941188

2004

Lucas, Gary, Wang, M., Mishra, Rakesh, Dai, Y. and Panatyapolous, N. (2004) Comparison Of gas velocity And volume fraction profiles from a dual-plane ERT system with profiles from a local conductance probe. In: 3rd international symposium on process tomography, 9 - 10 September 2004, Poland. (Unpublished)

Lucas, Gary, Mishra, Rakesh and Panayotopoulos, Nikolaos (2004) Power law approximations to gas volume fraction and velocity profiles in low void fraction vertical gas-liquid flows. Flow Measurement and Instrumentation, 15 (5/6). pp. 271-283. ISSN 0955-5986

Pislaru, Crinela, Ford, Derek G. and Holroyd, Geoffrey (2004) Hybrid modelling and simulation of a computer numerical control machine tool feed drive. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 218 (2). pp. 111-120. ISSN 0959-6518

Pislaru, Crinela, Moreno-Castaneda, V.Y. and Ford, Derek G. (2004) Dynamic model of a non-linear servo control system using transmission line modelling technique. In: UKACC International Conference CONTROL 2004, 6-9 September 2004, University of Bath. (Unpublished)

Sasi , Ahmed Yousef Ben, Gu, Fengshou, Payne , Bradley and Ball, Andrew (2004) Instantaneous angular speed monitoring of electric motors. Journal of Quality in Maintenance Engineering, 10 (2). pp. 123-135. ISSN 1355-2511

2003

Ball, Andrew, Gu, Fengshou and Yesilyurt, I. (2003) Gear tooth stiffness reduction measurement using modal analysis and its use in wear fault severity assessment of spur gears. NDT & E International, 36 (5). pp. 357-372. ISSN 0963-8695

Baydar, N and Ball, Andrew (2003) Detection of gear failures via vibration and acoustic signals using wavelet transform. Mechanical Systems and Signal Processing, 17 (4). pp. 787-804. ISSN 0888-3270

Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2003) Determination of stiffness and damping sensitivity for computer numerically controlled machine tool drives. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217 (10). pp. 1165-1177. ISSN 0954-4062

Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2003) Modelling the dynamic behaviour of a ball-screw system taking into account the changing position of the ball-screw nut. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 337-347. ISBN 9781853129902

Kumar, U., Mishra, Rakesh, Singh, S.N. and Seshadri, V. (2003) Effect of particle gradation on flow characteristics of ash disposal pipelines. Powder Technology, 132 (1). pp. 39-51. ISSN 0032-5910

Liang, Bo, Iwnicki, S. and Ball, Andrew (2003) Asymmetrical stator and rotor faulty detection using vibration, phase current and transient speed analysis. Mechanical Systems and Signal Processing, 17 (4). pp. 857-869. ISSN 0888-3270

Moreno-Castaneda, V.Y., Pislaru, Crinela, Freeman, J.M. and Ford, Derek G. (2003) Modelling and simulation of a feed drive using the transmission line modelling technique. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 193-202. ISBN 9781853129902

Payne, B.S., Gu, Fengshou, Webber, C J S and Ball, Andrew (2003) Componential coding in the condition monitoring of electrical machines Part 2: application to a conventional machine and a novel machine. Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science, 217 (8). pp. 901-915. ISSN 0954-4062

Pislaru, Crinela, Ford, Derek G. and Freeman, J.M. (2003) Identification of modal parameters affecting the dynamic performance of CNC machine tools. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 161-170. ISBN 9781853129902

Pislaru, Crinela, Freeman, J.M. and Ford, Derek G. (2003) Modal parameter identification for CNC machine tools using wavelet transform. International Journal of Machine Tools and Manufacture, 43 (10). pp. 987-993. ISSN 0890-6955

Webber, C J S, Payne, B.S., Gu, Fengshou and Ball, Andrew (2003) Componential coding in the condition monitoring of electrical machines Part 1: principles and illustrations using simulated typical faults. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 217 (8). pp. 883-899. ISSN 09544062

Widiyarto, Muhammad Helmi Nur, Ford, Derek G. and Pislaru, Crinela (2003) Evaluating the structural dynamics of a vertical milling machine. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 421-430. ISBN 9781853129902

2002

Baydar, N, Ball, Andrew and Payne, B.S. (2002) Detection of incipient gear failures using statistical techniques. IMA Journal of Management Mathematics, 13 (1). pp. 71-79. ISSN 1471-678X

Li, W, Parkin, Robert M, Coy, Joanne and Gu, Fengshou (2002) Acoustic based condition monitoring of a diesel engine using self-organising map networks. Applied acoustics, 63 (7). pp. 699-711. ISSN 0003-682X

Liang, Bo, Payne, B.S., Ball, Andrew and Iwnicki, S. (2002) Simulation and fault detection of three-phase induction motors. Mathematics and Computers in Simulation, 61 (1). pp. 1-15. ISSN 0378-4754

Liu, S, Gu, Fengshou and Ball, Andrew (2002) The on-line detection of engine misfire at low speed using multiple feature fusion with fuzzy pattern recognition. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 216 (5). pp. 391-402. ISSN 0954-4070

Mishra, Rakesh, Lucas, Gary and Kieckhoefer, H. (2002) A model for obtaining the velocity vectors of spherical droplets in multiphase flows from measurements using an orthogonal four-sensor probe. Measurement Science and Technology, 13 (9). pp. 1488-1498. ISSN 0957-0233

Mishra, Rakesh, Singh, Sidh and Seshadri, V. (2002) Velocity distribution in horizontal pipes conveying non-uniform particles. International Journal of Fluid Mechanics Research, 29 (6). pp. 760-778. ISSN 1064-2277

Pislaru, Crinela, Ford, Derek G. and Freeman, J.M. (2002) On modular modelling of CNC machine tool drives: a comparison between simulation and experimentation. In: OPTIM 2002, 2002, Romania. (Unpublished)

Pislaru, Crinela, Ford, Derek G. and Holroyd, Geoffrey (2002) Modelling non-linearities from CNC machine tool drives. In: OPTIM 2002, 2002, Romania. (Unpublished)

2001

Baydar, N and Ball, Andrew (2001) Detection of incipient tooth defect in helical gears using multivariate statistics. Mechanical Systems and Signal Processing, 15 (2). pp. 303-321. ISSN 0888-3270

Baydar, N and Ball, Andrew (2001) A comparative study of acoustic and vibration signals in detection of gear failures using Wigner-Ville distribution. Mechanical Systems and Signal Processing, 15 (6). pp. 1091-1107. ISSN 0888-3270

Crampton, Andrew (2001) Why is numerical analysis important to metrology? In: National Measurement and British Electro Magnetic Conference, November 2001, Harrogate.

Ford, Derek G., Pislaru, Crinela and Freeman, J.M. (2001) Improving CNC machine tools performance by using modular approach. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 301-312. ISBN 9781853128905

Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2001) Identification of damping elements in CNC machine tool drive. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 289-299. ISBN 9781853128905

Li, W, Gu, Fengshou, Ball, Andrew, Leung, A Y T and Phipps, C E (2001) A study of the noise from diesel engines using the independent component analysis. Mechanical Systems and Signal Processing, 15 (6). pp. 1165-1184. ISSN 0888-3270

Mishra, Rakesh, Fabien, C., Singh, S.N. and Seshadri, V. (2001) Holdup in multisized particulate solid-liquid flow through horizontal pipe. Indian Journal of Engineering & Materials Sciences, 8. pp. 84-89. ISSN 0971-4588

Pislaru, Crinela (2001) Parameter identification and hybrid mathematical modelling techniques applied to non-linear control systems. Doctoral thesis, University of Huddersfield.

2000

Baydar, N and Ball, Andrew (2000) Detection of gear deterioration under varying load conditions by using the instantaneous power spectrum. Mechanical Systems and Signal Processing, 14 (6). pp. 907-921. ISSN 0888-3270

Desforges, M J, Jacob, P J and Ball, Andrew (2000) Fault detection in rotating machinery using kernel-based probability density estimation. International Journal of Systems Science, 31 (11). pp. 1411-1426. ISSN 0020-7721

Gu, Fengshou, Ball, Andrew and Li, W (2000) The Condition Monitoring of Diesel Engines Using Acoustic Measurements-Part 1: Acoustic Characteristics of the Engine and Representation of the Acoustic Signals. SAE Technical Papers. ISSN 0148-7191

Gu, Fengshou, Ball, Andrew and Li, W (2000) The Condition Monitoring of Diesel Engines Using Acoustic Measurements-Part 2: Fault Detection and Diagnosis. SAE Technical Papers. ISSN 0148-7191

1998

Agarwal, V.C. and Mishra, Rakesh (1998) Optimal design of a multi-stage capsule handling multi-phase pipeline. International Journal of Pressure Vessels and Piping, 75 (1). pp. 27-35. ISSN 0308-0161

Mishra, Rakesh, Singh, S.N. and Seshadri, V. (1998) Study of wear characteristics and solid distribution in constant area and erosion-resistant long-radius pipe bends for the flow of multisized particulate slurries. Wear, 217 (2). pp. 297-306. ISSN 0043-1648

Mishra, Rakesh, Singh, S.N. and Seshadri, V. (1998) Velocity measurement in solid–liquid flows using an impact probe. Flow Measurement and Instrumentation, 8 (3-4). pp. 157-165. ISSN 0955-5986

1996

Gu, Fengshou and Ball, Andrew (1996) Diesel injector dynamic modelling and estimation of injection parameters from impact response Part 1: modelling and analysis of injector impacts. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 210 (44). pp. 293-302. ISSN 0954-4070

Gu, Fengshou, Ball, Andrew and Rao, K K (1996) Diesel injector dynamic modelling and estimation of injection parameters from impact response part 2: prediction of injection parameters from monitored vibration. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 210 (44). pp. 303-312. ISSN 0954-4070

This list was generated on Fri Oct 31 21:26:25 2014 GMT.

University of Huddersfield, Queensgate, Huddersfield, HD1 3DH Copyright and Disclaimer All rights reserved ©