Items where School is "EPSRC Centre for Innovative Manufacturing in Advanced Metrology "

Article

Bills, Paul J., Underwood, R.J., Cann, P. and Hart, A. J. (2012) What is required to measure the wear of explanted metal on metal hips? Bone and joint journal: Orthopaedic Proceedings, 94-B (Sup 18). p. 100. ISSN 1358-992X

Bills, Paul J., Racasan, Radu, Bhattacharya, Saugatta, Blunt, Liam and Isaac, Graham (2017) Comparative study of material loss at the taper interface in retrieved metal-on-polyethylene and metal-on-metal femoral components from a single manufacturer. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 231 (8). pp. 683-690. ISSN 0954-4119

Bills, Paul J., Racasan, Radu, Tessier, P and Blunt, Liam (2015) Assessing the material loss of the modular taper interface in retrieved metal on metal hip replacements. Surface Topography: Metrology and Properties, 3 (2). 025002. ISSN 2051-672X

Bills, Paul J., Racasan, Radu, Underwood, R.J., Cann, P., Skinner, J., Hart, A.J., Jiang, Xiang and Blunt, Liam (2012) Volumetric wear assessment of retrieved metal-on-metal hip prostheses and the impact of measurement uncertainty. Wear, 274. pp. 212-219. ISSN 0043-1648

Borisov, Oleg, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) New low cost sensing head and taut wire method for automated straightness measurement of machine tool axes. Optics and lasers in engineering, 51 (8). pp. 978-985. ISSN 0143-8166

Borisov, Oleg, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2014) Performance evaluation of a new taut wire system for straightness measurement of machine tools. Precision Engineering, 38 (3). pp. 492-498. ISSN 0141-6359

Cui, C.uk, Li, T., Blunt, L.A., Jiang, X., Huang, H., Ye, R. and Fan, W. (2013) The Assessment of Straightness and Flatness Errors Using Particle Swarm Optimization. Procedia CIRP, 10. pp. 271-275. ISSN 2212-8271

Ding, Hao, Scott, Paul J. and Jiang, X. (2015) A Criterion for Comparing Measurement Results and Determining Conformity with Specifications. Procedia CIRP, 27. pp. 143-148. ISSN 2212-8271

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh, Bird, David, Robbins, David and Sweeney, Francis (2014) Modelling water vapor permeability through atomic layer deposition coated photovoltaic barrier defects. Thin Solid Films, 570A. pp. 101-106. ISSN 00406090

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh, Sweeney, Francis, Robbins, David and Bird, David (2015) Metrology of Al2O3 Barrier Film for Flexible CIGS Solar Cells. International Journal of Energy Optimization and Engineering (IJEOE), 4 (4). pp. 46-60. ISSN 2160-9500

Elrawemi, Mohamed, Blunt, Liam, Muhamedsalih, Hussam, Gao, F. and Fleming, Leigh (2015) Implementation of in Process Surface Metrology for R2R Flexible PV Barrier Films. International Journal of Automation Technology, 9 (3). pp. 312-321. ISSN 1883-8022

Ford, Derek G., Castaneda, Veimar Yobany Moreno, Longstaff, Andrew P., Pislaru, Crinela and Myers, Alan (2014) Computer numerical control vertical machining centre feed drive modelling using the transmission line technique. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science. pp. 1-22. ISSN 09544062

Ford, Derek G., Myers, Alan, Haase, Frerk, Lockwood, Stephen and Longstaff, Andrew P. (2013) Active Vibration Control for a CNC Milling Machine. Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science. ISSN 0954-4062

Ford, Derek G., Widiyarto, Muhammad Helmi Nur, Myers, Alan, Longstaff, Andrew P. and Fletcher, Simon (2014) Structural analysis and chracterisation technique applied to a CNC vertical machining centre. Journal of Mechanical Engineering Science. ISSN 0954-4062

Groschl, Andreas, Gotz, Jurgen, Loderer, Andreas, Bills, Paul J. and Hausotte, Tino (2015) Measures of improvement MUVoT, a Blended Learning course on the topic of Measurement Uncertainty for advanced Vocational Training. Procedia CIRP, 27. pp. 111-116. ISSN 2212-8271

Hart, A. J., Matthies, Ashley K, Racasan, Radu, Bills, Paul J., Panagiotidou, A, Blunt, Liam, Blunn, Gordon and Skinner, John (2013) Taper wear contributes only a third of the total volumetric material loss in large head metal on metal hip replacement. Bone and joint journal: Orthopaedic Proceedings, 95-B (Sup 13). p. 14. ISSN 1358-992X

Hassan, Mothana A., Martin, Haydn and Jiang, Xiangqian (2014) Surface profile measurement using spatially dispersed short coherence interferometry. Surface Topography: Metrology and Properties, 2 (2). 024001. ISSN 2051-672X

Hexter, A., Matthies, Ashley K., Bills, Paul J., Skinner, John and Hart, A.J. (2013) Volumetric material loss in metal-on-metal total hip arthroplasty: Bearing surface wear versus taper corrosion. British Journal of Surgery, 100 (s4). p. 42. ISSN 0007-1323

Hothi, Harry, Cro, Suzie, Bills, Paul J., Blunt, Liam, Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, A. J. (2013) Correlation Between the Detailed Visual Inspection of Retrieved Metal-on-Metal Hips and Their Volumetric Wear. Bone and joint journal: Orthopaedic Proceedings, 95-B (Sup 34). p. 78. ISSN 1358-992X

Hothi, Harry, Berber, R, Whittaker, Robert, Bills, Paul J., Skinner, John and Hart, A. J. (2015) Detailed Inspection of Metal Implants. Hip International, 25 (3). pp. 227-231. ISSN 1120-7000

Hothi, Harry, Panagiotopoulos, Andreas, Whittaker, Robert, Bills, Paul J., McMillan, Rebecca, Skinner, John and Hart, A. J. (2017) Damage patterns at the head-stem taper junction helps understand the mechanisms of material loss. Journal of Arthroplasty, 32 (1). pp. 291-295. ISSN 0883-5403

Ibrahim, S. M., Bills, Paul J., Allport, John and Racasan, Radu (2017) The Impediments to Nigeria Understanding Oil Production Volumes, Losses and Potential Solutions. International Journal of African and Asian Studies, 36. pp. 36-44. ISSN 2409-6938

Jiang, Xiang (2013) Editorial: Special issue on geometrical products design and their metrology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 (5). p. 633. ISSN 0954-4054

Jiang, Xiang (2012) Precision surface measurement. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 4089-4114. ISSN 1364-503X

Jiang, Xiang, Lou, Shan and Scott, Paul J. (2011) Morphological method for surface metrology and dimensional metrology based on the alpha shape. Measurement Science and Technology, 23 (1). 015003. ISSN 0957-0233

Jiang, Xiang, Shore, Paul, McKeown, Pat, Whitehouse, David J. and Ruffles, Philip Charles (2012) Introduction: Ultra-precision engineering: from physics to manufacturing. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 3831-3834. ISSN 1364-503X

Jiang, Xiang, Shore, Paul, McKeown, Pat, Whitehouse, David J. and Ruffles, Philip Charles (2012) Preface: Discussion Meeting Issue. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 3829-3830. ISSN 1364-503X

Jiang, Xiang, Shore, Paul, McKeown, Pat, Whitehouse, David J. and Ruffles, Phillip C. (2012) Ultra-precision engineering: from physics to manufacturing. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 3831-3834. ISSN 1364-503X

Jiang, Xiang and Whitehouse, David J. (2012) Precision metrology. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 4154-4160. ISSN 1364-503X

Jiang, Xiang and Whitehouse, David J. (2012) Technological shifts in surface metrology. CIRP Annals - Manufacturing Technology, 61 (2). pp. 815-836. ISSN 0007-8506

Kapadia, Darshil, Racasan, Radu, Pagani, Luca, Al-Hajjar, Mazen and Bills, Paul J. (2017) Method for volumetric assessment of edge-wear in ceramic-on-ceramic acetabular liners. Wear, 376-77 (Part A). pp. 236-242. ISSN 0043-1648

Lan, Xiangqi, Jiang, Xiang, Zeng, Wenhan and Blunt, Liam (2015) Construct Surface Characterization System by Assembling Functional Components Dynamically. Procedia CIRP, 27. pp. 198-201.

Leung, AYT, Guo, Zhongjin and Myers, Alan (2012) Steady state bifurcation of a periodically excited system under delayed feedback controls. Communications in Nonlinear Science and Numerical Simulation, 17 (12). pp. 5256-5272. ISSN 1007-5704

Leung, Isaac Pak Hung, Fleming, Leigh, Walton, Karl, Barrans, Simon and Ousey, Karen (2017) Development of a model to demonstrate the effects of friction and pressure on skin in relation to pressure ulcer formation. Wear, 376/77 (A). pp. 266-271. ISSN 0043-1648

Linares, J-M, Chaves-Jacob, J, Schwenke, H, Longstaff, Andrew P., Fletcher, Simon, Flore, J, Uhlmanne, E and Winteringe, J (2014) Impact of measurement procedure when error mapping and compensating a small CNC machine using a multilateration laser interferometer. Precision Engineering, 38 (3). pp. 578-588. ISSN 0141-6359

Longstaff, Andrew P., Fletcher, Simon, Parkinson, Simon and Myers, Alan (2014) The Role of Measurement and Modelling of Machine Tools in Improving Product Quality. International Journal of Metrology and Quality Engineering, 4 (03). pp. 177-184. ISSN 2107-6839

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2013) Geometric computation theory for morphological filtering on freeform surfaces. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 469 (2159). p. 20130150. ISSN 1364-5021

Lou, Shan, Jiang, Xiang, Zeng, Wenhan and Paul, Scott (2015) A theoretical insight into morphological operations in surface measurement by introducing the slope transform. Journal of Zhejiang University Science A, 16 (5). pp. 395-403. ISSN 1673-565X

Lou, Shan, Jiang, Xiangqian, Bills, Paul J. and Scott, Paul J. (2013) Defining True Tribological Contact Through Application of the Morphological Method to Surface Topography. Tribology Letters, 50 (2). pp. 185-193. ISSN 1023-8883

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2012) Algorithms for morphological profile filters and their comparison. Precision Engineering, 36 (3). pp. 414-423. ISSN 01416359

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) Application of the morphological alpha shape method to the extraction of topographical features from engineering surfaces. Measurement, 46 (2). pp. 1002-1008. ISSN 0263-2241

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) Correlating motif analysis and morphological filters for surface texture analysis. Measurement, 46 (2). pp. 993-1001. ISSN 0263-2241

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) An Efficient Divide-and-Conquer Algorithm for Morphological Filters. Procedia Engineering: 12th CIRP Conference on Computer Aided Tolerancing, 10. pp. 142-147. ISSN 1877-7058

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2011) Fast Algorithm for Morphological Filters. Journal of Physics: Conference Series, 311. p. 284. ISSN 1742-6596

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2014) Morphological filters for functional assessment of roundness profiles. Measurement Science and Technology, 25 (6). 065005. ISSN 0957-0233

Lou, Shan, Zeng, Wenhan, Jiang, Xiang and Scott, Paul J. (2013) Robust Filtration Techniques in Geometrical Metrology and Their Comparison. International Journal of Automation and Computing, 10 (1). pp. 1-8. ISSN 1476-8186

Lu, Wenlong, Liu, Xiaojun, Jiang, Xiangqian, Qi, Qunfen and Scott, Paul J. (2010) Categorical data modelling for Cylindricity Consistent with Geometrical Product Specifications Standard System. Proceedings of SPIE: Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 75446S. ISSN 1996-756X

Lu, Wenlong, Qin, Yuchu, Qi, Qunfen, Zeng, Wenhan, Zhong, Yanru, Liu, Xiaojun and Jiang, Xiang (2016) Selecting a semantic similarity measure for concepts in two different CAD model data ontologies. Advanced Engineering Informatics, 30 (3). pp. 449-466. ISSN 1474-0346

Lu, Wenlong, Yu, Nengguo, Zou, Xianglong, Liu, Xiaojun, Zhou, Liping and Li, Tukun (2015) Evaluation of MEMS Structures with Directional Characteristics Based on FRAT and Lifting Wavelet. Procedia CIRP, 27. pp. 298-302. ISSN 2212-8271

Lu, Wenlong, Zhang, Gengpei, Liu, Xiaojun, Zhou, Liping, Chen, Liangzhou and Jiang, Xiang (2014) Prediction of Surface Topography at the End of Sliding Running-In Wear Based on Areal Surface Parameters. Tribology Transactions, 57 (3). pp. 553-560. ISSN 1040-2004

Lu, Wenlong, Zhang, Po, Liu, Xiaojun, Zhai, Wenzheng, Zhou, Mingzhuo, Luo, Jian, Zeng, Wenhan and Jiang, Xiang (2017) Influence of surface topography on torsional fretting wear under flat-on-flat contact. Tribology International, 109. pp. 367-372. ISSN 0301-679X

Martin, Haydn and Jiang, Xiangqian (2013) Dispersed reference interferometry. CIRP Annals - Manufacturing Technology, 62 (1). pp. 551-554. ISSN 0007-8506

Martin, Haydn, Kumar, Prashant and Jiang, Xiangqian (2014) A hybrid photonics based sensor for surface measurement. CIRP Annals - Manufacturing Technology, 63 (1). pp. 549-552. ISSN 0007-8506

Matthies, Ashley K, Racasan, Radu, Bills, Paul J., Panagiotidou, A, Skinner, John, Blunn, Gordon and Hart, A. J. (2013) Corrosion is the main mechanism of material loss at the taper junction of large head metal on metal hip replacements. Bone and joint journal: Orthopaedic Proceedings, 95-B (Sup 13). p. 13. ISSN 1358-992X

Matthies, Ashley K, Racasan, Radu, Bills, Paul J., Blunt, Liam, Cro, Suzie, Panagiotidou, Anna, Blunn, Gordon, Skinner, John and Hart, Alister J (2013) Material Loss at the Taper Junction of Retrieved Large Head Metal-on-Metal Total Hip Replacements. Journal of Orthopaedic Research, 31 (11). pp. 1677-1685. ISSN 0736-0266

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) Efficient estimation by FEA of machine tool distortion due to environmental temperature perturbations. Precision Engineering, 37 (2). pp. 372-379. ISSN 0141-6359

Pagani, Luca, Qi, Qunfen, Jiang, Xiangqian and Scott, Paul J. (2017) Towards a new definition of areal surface texture parameters on freeform surface. Measurement, 109. pp. 281-291. ISSN 0263-2241

Pagani, Luca and Scott, Paul J. (2016) A sampling strategy based on B-wavelets decomposition. Procedia CIRP, 43. pp. 29-34. ISSN 2212-8271

Parkinson, Simon, Longstaff, Andrew P. and Fletcher, Simon (2014) Automated planning to minimise uncertainty of machine tool calibration. Engineering Applications of Artificial Intelligence, 30. pp. 63-72. ISSN 0952-1976

Parkinson, Simon, Longstaff, Andrew P., Fletcher, Simon, Crampton, Andrew and Gregory, Peter (2012) Automatic planning for machine tool calibration: A case study. Expert Systems with Applications, 39 (13). pp. 11367-11377. ISSN 09574174

Qi, Qunfen, Jiang, Xiang and Scott, Paul J. (2012) Knowledge modeling for specifications and verification in areal surface texture. Precision Engineering, 36 (2). pp. 322-333. ISSN 0141-6359

Qi, Qunfen, Scott, Paul J., Jiang, Xiangqian and Lu, Wenlong (2014) Design and implementation of an integrated surface texture information system for design, manufacture and measurement. Computer Aided Design, 57. pp. 41-53. ISSN 0010-4485

Qi, Qunfen, Scott, Paul J., Jiang, Xiangqian and Lu, Wenlong (2016) A hierarchical category model for geometrical product specifications (GPS). Procedia CIRP, 43. pp. 214-219. ISSN 2212-8271

Qin, Yuchu, Lu, Wenlong, Qi, Qunfen, Li, Tukun, Huang, Meifa, Scott, Paul J. and Jiang, Xiang (2016) Explicitly representing the semantics of composite positional tolerance for patterns of holes. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Qin, Yuchu, Lu, Wenlong, Qi, Qunfen, Liu, Xiaojun, Zhong, Yanru, Scott, Paul J. and Jiang, Xiang (2016) Status, comparison, and issues of CAD model data exchange methods based on standardized neutral files and OWL file. Journal of Computing and Information Science in Engineering, 17 (1). ISSN 1530-9827

Qin, Yuchu, Lu, Wenlong, Qi, Qunfen, Liu, Xiaojun, Zhou, Liping and Li, Tukun (2015) Ontology-based semantic interpretation of cylindricity specification in the next-generation GPS. Procedia CIRP, 27. pp. 124-130. ISSN 2212-8271

Racasan, Radu, Fleming, Leigh, Bills, Paul J., Skinner, John, Hart, A. J. and Blunt, Liam (2013) Characterisation of Wear Morphology at the Head Cup Bearing Interface in Retrieved Metal-on-Metal Hip Replacements. Bone and joint journal: Orthopaedic Proceedings, 95-B (Sup 34). p. 488. ISSN 1358-992X

Ren, Hongyu, Gao, Feng and Jiang, Xiangqian (2016) Least-squares method for data reconstruction from gradient data in deflectometry. Applied Optics, 55 (22). pp. 6052-6059. ISSN 0003-6935

Rubio Rodriguez, Luis, De la Sen Parte, Manuel, Longstaff, Andrew P. and Fletcher, Simon (2013) Model-based Expert System to Automatically Adapt Milling Forces in Pareto Optimal Multi-Objective Working Points. Expert Systems With Applications, 40 (6). pp. 2312-2322. ISSN 0957-4174

Rubio Rodriguez, Luis, De la Sen Parte, Manuel, Longstaff, Andrew P. and Myers, Alan (2013) Analysis of discrete time schemes for milling forces control under fractional order holds. International Journal of Precision Engineering and Manufacturing, 14 (5). pp. 735-744. ISSN 2234-7593

Scott, Paul J. and Forbes, Alistair B. (2012) Mathematics for modern precision engineering. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 370 (1973). pp. 4066-4088. ISSN 1364-503X

Senin, Nicola, Blunt, Liam and Tolley, Martin (2012) The use of areal surface topography analysis for the inspection of micro-fabricated thin foil laser targets for ion acceleration. Measurement Science and Technology, 23 (10). p. 105004. ISSN 0957-0233

Shah, Paras, Racasan, Radu and Bills, Paul J. (2016) Comparison of Different Additive Manufacturing Methods Using Computed Tomography. Case Studies in Nondestructive Testing and Evaluation. ISSN 2214-6571

Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2012) Five-Axis Machine Tool Condition Monitoring Using dSPACE Real-Time System. Journal of Physics: Conference Series, 364. 012091. ISSN 1742-6596

Tang, Dawei, Gao, Feng and Jiang, Xiangqian (2014) On-line surface inspection using cylindrical lens-based spectral domain low-coherence interferometry. Applied Optics, 53 (24). pp. 5510-5516. ISSN 1559-128X

Tian, Y., Wang, Jian, Peng, Z. and Jiang, Xiang (2011) Numerical analysis of cartilage surfaces for osteoarthritis diagnosis using field and feature parameters. Wear, 271 (9-10). pp. 2370-2378. ISSN 0043-1648

Tong, Zhen, Liang, Yingchun, Jiang, Xiang and Luo, Xichun (2014) An atomistic investigation on the mechanism of machining nanostructures when using single tip and multi-tip diamond tools. Applied Surface Science, 290. pp. 458-465. ISSN 0169-4332

Townsend, Andrew, Pagani, Luca, Scott, Paul J. and Blunt, Liam (2017) Areal surface texture data extraction from x-ray computed tomography reconstructions of metal additively manufactured parts. Precision Engineering, 48. pp. 254-264. ISSN 0141-6359

Walker, David D., Yu, G., Bibby, M., Dunn, C., Li, H., Wu, H. Y., Zheng, X. and Zhang, P. (2016) Robotic automation in computer controlled polishing. Journal of the European Optical Society: Rapid Publications, 11. p. 16005. ISSN 1990-2573

Walton, Karl, Blunt, Liam, Fleming, Leigh, Goodhand, Martin and Lung, Hang (2014) Areal parametric characterisation of ex-service compressor blade leading edges. Wear, 321. pp. 79-86. ISSN 0043-1648

Walton, Karl, Blunt, Liam, Fleming, Leigh, Goodhand, Martin and Lung, Hang (2014) A real parametric characterisation of ex-service compressor blade leading edges. Wear, 321. pp. 79-86. ISSN 00431648

Walton, Karl, Blunt, Liam and Fleming, Leigh (2015) The topographic development and areal parametric characterization of a stratified surface polished by mass finishing. Surface Topography: Metrology and Properties, 3 (3). 035003. ISSN 2051-672X

Wang, Jian, Jiang, Xiang, Blunt, Liam, Leach, Richard K. and Scott, Paul J. (2012) Intelligent sampling for the measurement of structured surfaces. Measurement Science and Technology, 23 (8). ISSN 0957-0233

Wang, Jian, Jiang, Xiangqian, Gurdak, Elzbieta, Scott, Paul J., Leach, Richard, Tomplins, Paul and Blunt, Liam (2011) Numerical characterisation of biomedical titanium surface texture using novel feature parameters. Wear, 271 (7-8). pp. 1059-1065. ISSN 0043-1648

Wang, Jian, Leach, R.K. and Jiang, Xiang (2015) Review of the mathematical foundations of data fusion techniques in surface metrology. Surface Topography: Metrology and Properties, 3 (2). ISSN 2051-672X

Wang, M., Peng, Z., Wang, Jian and Jiang, Xiang (2013) Wear characterisation of articular cartilage surfaces at a nano-scale using atomic force microscopy. Tribology International, 63. pp. 235-242. ISSN 0301-679X

Whittaker, R, Hexter, A, Hothi, H, Panagiotidou, A, Bills, Paul J., Skinner, John and Hart, A. J. (2014) Component Size Mismatch of Metal on Metal Hip Arthroplasty: An Avoidable Never Event. Journal of Arthroplasty, 29 (8). pp. 1629-1634. ISSN 0883-5403

Zeng, Shengye, Blunt, Liam and Racasan, Radu (2013) An investigation of the viability of bonnet polishing as a possible method to manufacture hip prostheses with multi-radius femoral heads. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Zeng, Wenhan, Jiang, Xiangqian, Scott, Paul J. and Li, Tukun (2013) A New Method to Characterize the Structured Tessellation Surface. Procedia CIRP, 10. pp. 155-161. ISSN 2212-8271

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) A Reliable Method of Minimum Zone Evaluation of Cylindricity and Conicity from Coordinate Measurement Data. Precision Engineering, 35 (3). pp. 484-489. ISSN 0141-6359

Book Chapter

Gao, F., Muhamedsalih, Hussam, Tang, Dawei, Elrawemi, Mohamed, Blunt, Liam, Jiang, Xiang, Edge, Steven, Bird, David and Hollis, Philip (2015) In-situ defect detection systems for R2R flexible PV films. In: ASPE 2015 Summer Topical Meeting. American Society for Precision Engineering, Colarado, USA, pp. 44-49. ISBN 978-1-887706-68-1

Goodhand, Martin N., Walton, Karl, Blunt, Liam, Lung, Hang W., Miller, Robert J. and Marsden, Reg (2015) The Limitations of “Ra” to Describe Surface Roughness. In: ASME Proceedings | Transitional Flows (With Turbomachinery) : ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. ASME, V05CT16A003. ISBN 978-0-7918-5673-4

Jiang, Xiang, Zeng, Wenhan and Scott, Paul J. (2011) Wavelet Analysis for the Extraction of Morphological Features for Orthopaedic Bearing Surfaces. In: Progress in Molecular and Environmental Bioengineering - From Analysis and Modeling to Technology Applications. InTech, London. ISBN 9789533072685

Kumar, Prashant, Martin, Haydn, Maxwell, G and Jiang, Xiang (2014) Hybrid photonic chip interferometer for embedded metrology. In: Proceedings of SPIE: Integrated Optics: Devices, Materials, and Technologies XVIII. SPIE, California, USA, 89880N.

Muhamedsalih, Hussam, Blunt, Liam, Martin, Haydn, Hamersma, Ivo, Elrawemi, Mohamed and Feng, Gao (2015) An integrated opto-mechanical measurement system for in-process defect measurement on a roll-to-roll process. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 99-107. ISBN 978-0-9566790-5-5

Muhamedsalih, Hussam, Blunt, Liam, Martin, Haydn, Jiang, Xiang and Elrawemi, Mohamed (2014) An interferometric auto-focusing method for on-line defect assessment on a roll-to-roll process using wavelength scanning interferometry. In: Proceedings of EUSPEN 14th International Conference 2014. EUSPEN, Dubrovnik, Croatia, pp. 177-180. ISBN 978-0-9566790-3-1

Muhamedsalih, Hussam, Elrawemi, Mohamed, Blunt, Liam, Xiangqi, Lan and Martin, Haydn (2015) A computerised data handling procedure for defect detection and analysis for large area substrates manufactured by roll-to-roll process. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 84-91. ISBN 978-0-9566790-5-5

Pagani, Luca and Scott, Paul J. (2016) Areal surface texture parameters on surface. In: Dimensional Accuracy and Surface Finish in Additive Manufacturing. American Society for Precision Engineering, North Carolina, USA.

Papananias, M., Sztendel, S. and Pislaru, Crinela (2015) Development of a Novel MultiBody Mechatronic Model for Five-Axis CNC Machine Tool. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 379-389. ISBN 978-0-9566790-5-5

Parkinson, Simon, Crampton, Andrew and Longstaff, Andrew P. (2015) Optimising Measurement Processes Using Automated Planning. In: Advances in Mathematical and Computational Tools in Metrology and Testing. Series on Advances in Mathematics for Applied Sciences, 86 (X). World Scientific, Singapore, pp. 286-292. ISBN 978-981-4678-61-2

Parkinson, Simon, Longstaff, Andrew P., Crampton, Andrew, Allen, Gary, Fletcher, Simon and Myers, Alan (2012) The use of Cryptographic Principles within Metrology Software. In: Advanced Mathematical and Computational Tools in Metrology and Testing. Series on Advances in Mathematics for Applied Sciences, 9 (84). World Scientific, Singapore, China, pp. 292-296.

Perkins, Christopher, Longstaff, Andrew P., Fletcher, Simon and Willoughby, Peter (2012) Rate-of-change analysis applied to machine tool monitoring and maintenance schedules. In: Advanced Mathematical and Computational Tools in Metrology and Testing IX. Series on Advances in Mathematics for Applied Sciences, 84 . World Scientific, London, UK, pp. 329-333. ISBN 9789814397940

Qi, Qunfen, Jiang, Xiang and Scott, Paul J. (2013) A Knowledge Platform for Surface Texture in Advanced Manufacturing. In: Manufacturing the Future Conference. Abstracts from the 2nd Annual EPSRC . EPSRC, Cranfield, UK, p. 60. ISBN 978-1-907413-22-3

Racasan, Radu, Bills, Paul J., Blunt, Liam, Hart, Alister and Skinner, John (2015) Method for Characterization of Material Loss from Modular Head-Stem Taper Surfaces of Hip Replacement Devices. In: Modularity and Tapers in Total Joint Replacement Devices. Selected technical papers (STP159). ASTM International, West Conshohocken, PA, pp. 132-146. ISBN 978-0-8031-7627-0

Ren, Hongyu, Jiang, Xiangqian, Gao, Feng and Zhang, Zonghua (2014) Absolute height measurement of specular surfaces with modified active fringe reflection photogrammetry. In: Proceedings of SPIE 9204, Interferometry XVII: Advanced Applications, 920408. SPIE, California, USA, 920408-1-920408-8.

Shagluf, Abubaker, Longstaff, Andrew P., Fletcher, Simon and Denton, Paul (2013) Towards a Downtime Cost Function to Optimise Machine Tool Calibration Schedules. In: Proceedings of the International Conference on Advanced Manufacturing Engineering and Technologies. NEWTECH 2013 . KTH Royal Institute of Technology, Stockholm, Sweden, pp. 231-240. ISBN 9789175018935

Sztendel, S., Papananias, M. and Pislaru, Crinela (2015) Improving the Dynamic Performance of Five-Axis CNC Machine Tool by using the Software-in-the-Loop (SIL) Platform. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 170-180. ISBN 978-0-9566790-5-5

Conference or Workshop Item

Abuaniza, Ayman, Fletcher, Simon, Mian, Naeem S. and Longstaff, Andrew P. (2015) Machine structure simulation using FEA and optimised thermal parameters. In: Laser Metrology and Machine Performance (LAMDAMAP) 2015, 17-18 March 2015, University of Huddersfield. (Unpublished)

Alberts, L. R., Martinez-Nogues, V., Cook, R. B., Maul, C., Bills, Paul J., Racasan, Radu, Stolz, M. and Wood, R. J. K. (2016) Comparison of Simulator Wear Measured by Gravimetric vs Optical Surface Methods for Two Million Cycles. In: Orthopaedic Research Society Annual Meeting, 5th - 8th March 2016, Orlando, Florida, USA. (Unpublished)

Bills, Paul J. (2016) Introduction to Computed Tomography as an aid to Forensic Analysis. In: Age Estimation Workshop, 13th - 14th May 2016, University of Huddersfield, UK. (Submitted)

Bills, Paul J., Blunt, Liam, Racasan, Radu, Skinner, J. and Hart, A. J. (2013) Accurate determination of material loss at the taper interface of retrieved metal-on-metal hip replacements. In: 19th International Conference on Wear of Materials, 14-18th April 2013, Portland, Oregon USA. (Submitted)

Bills, Paul J., Lou, Shan and Jiang, Xiang (2012) Development of morphological filtering method for specification and characterisation of hip replacement taper junctions. In: 12th International Conference of the European Society for Precision Engineering and Nanotechnology, 4th-8th June 2012, Stockholm, Sweden.

Bills, Paul J., Racasan, Radu, Hart, A. J., Skinner, J. and Blunt, Liam (2012) Accurate determination of clinical wear in retrieved metal-on-metal hip replacement joints. In: Euro-Mediterranean Conference on Bioengineering and Biomaterials, 4th-6th July 2012, Fes, Morocco. (Unpublished)

Bills, Paul J., Racasan, Radu, Tessier, P and Blunt, Liam (2013) Assessing the wear of the modular taper interface in retrieved metal-on-metal hip replacements. In: 14th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2013), June 17-21, 2013, Taipei, Taiwan. (Unpublished)

Bills, Paul J., Racasan, Radu, Tessier, P and Blunt, Liam (2014) Methods to assess material loss of the modular taper interface in retrieved hip replacements. In: Structures Surfaces in Engineering, Metrology and Healthcare, 30th September 2014, NPL, Teddington, London, UK. (Unpublished)

Bills, Paul J., Shah, Paras, Townsend, Andrew, Blunt, Liam and Racasan, Radu (2016) Characterization of complex additive manufactured structures for the medical device industry using computed tomography. In: Dimensional X-Ray Computed Tomography Conference, 10th May 2016, National Physical Laboratory, London, UK. (Unpublished)

Blunt, Liam, Bills, Paul J. and Fleming, Leigh (2015) Metrology for Bio Systems. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, March 2-5 2015, Charlotte, NC, USA. (Submitted)

Blunt, Liam and Elrawemi, Mohamed (2015) Functional Modelling of Water Vapour Transmission through Surface Defects Using Surface Segmentation Analysis. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, 2nd-5th March 2015, University of North Carolina at Charlotte Charlotte, North Carolina, USA.

Cerquiglini, Arianna, Henckel, Johann, Hothi, Harry, Rotigliano, Niccolo, Holland, Matthew, Bills, Paul J., Racasan, Radu, Skinner, John, Hirschmann, A and Hart, A. J. (2017) Understanding Why Knee Implants Fail. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 14-18 2017, San Diego, CA, USA. (Unpublished)

Di Laura, Anna, Whittaker, Robert, Hothi, Harry, Meswania, Jay, Henckel, Johann, de Villiers, Danielle, Kwon, Young-Min, Racasan, Radu, Bills, Paul J., Blunn, Gordon, Skinner, John and Hart, A. J. (2016) Understanding Why Dual-Taper Hips Fail. In: American Academy of Orthopaedic Surgeons Annual Meeting, 1-5 March 2016, Orlando, USA.

Ding, Hao, Scott, Paul J. and Jiang, Xiang (2014) A criterion for comparing measurement results and determining conformity with specifications. In: 13th CIRP Conference on Computer Aided Tolerancing, 11th-14th May 2014, Hangzhou, China. (Unpublished)

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh and Muhamedsalih, Hussam (2014) Wavelength Scanning Interferometery for large area roll to roll metrology applications in photovoltaic manufacturing environment. In: 10th LVMC Large Volume Metrology Conference and Exhibition, 18th -20th November 2014, The Mercure Manchester Piccadilly, UK.

Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh, Muhamedsalih, Hussam and Gao, F. (2014) Wavelength Scanning Interferometry for PV Production In-line Metrology. In: 3rd Annual EPSRC Manufacturing the Future Conference, 23rd – 24th September 2014, Glasgow Science Centre, Glasgow, UK.

Elrawemi, Mohamed, Blunt, Liam and Greaves, Graeme (2015) Nano scale Characterisation of Photovoltaic Ultra Barrier Films. In: 2nd International Conference on Nanotechnology, Nanomaterials & Thin Films for Energy Applications, 1-3 June 2015, Manchester, UK.

Elrawemi, Mohamed, Blunt, Liam, Muhamedsalih, Hussam, Fleming, Leigh and Gao, Feng (2014) Verification of an in Process Optical System based on High Resolution Interferometry for Detecting Flexible PV Barrier Films Defects. In: Photon14, 1-4 September 2014, Imperial College, London, UK.

Fleming, Leigh, Racasan, Radu, Bills, Paul J., Skinner, John, Hart, Alister J and Blunt, Liam (2013) Characterisation of wear morphology at the head-cup bearing interface in retrieved metal-on-metal hip replacements. In: International Society for Technology in Arthroplasty 26th Annual Congress, 16-19 October 2013, Palm Beach, Florida, USA. (Unpublished)

Fletcher, Simon, Mian, N S and Longstaff, Andrew P. (2014) Optimising temperature sensor placement for machine tool thermal error compensation. In: EUSPEN Special Interest Group: Thermal Issues, 19-20 March 2014, Novotel Zurich City, Zurich, Switzerland. (Unpublished)

Foster, Katie, Bills, Paul J., Blunt, Liam, Jiang, Xiang and Leary, Richard (2015) The use of additive manufacturing for the presentation of ballistic toolmark evidence in court. In: 7th European Academy of Forensic Science Conference, 6-11 September 2015, Prague, Czech Republic.

Gao, F., Tang, Dawei and Jiang, Xiang (2013) White Light Spectral Interferometry for Real Time Surface Profile Measurement. In: ASPEN 2013, 12-15, November 2013, Taipei, Taiwan. (Unpublished)

Gao, Feng, Muhamedsalih, Hussam, Elrawemi, Mohamed, Blunt, Liam, Jiang, Xiang, Edge, Steven, Bird, David and Hollis, Philip (2014) A flexible PV barrier films defects detection system for in-situ R2R film processing. In: Special Interest Group Meeting: Structured Freeform Surfaces 2014 Programme, 19-20 Nov 2014, Padova, Italy.

Gao, Feng, Muhamedsalih, Hussam, Tang, Dawei, Elrawemi, Mohamed, Blunt, Liam, Jiang, Xiang, Edge, Steven, Bird, David and Hollis, Philip (2015) In-situ defect detection systems for R2R flexible PV barrier films. In: International Conference on Optical Instrument and Technology (OIT’2015), 17th-19th May, Beijing, China.

Groschl, Andreas, Akkasoglu, Gokhan, Loderer, Andreas, Plowucha, Wojciech, Werner, Teresa, Bills, Paul J. and Hausotte, Tino (2014) MUVOT - Establishing an International Vocational Training Program on the Topic of Measurement Uncertainty. In: 11th International Symposium on Measurement and Quality Control, 11-13 September 2013, Cracow-Kielce, Poland.

Hart, A. J., Matthies, A, Bills, Paul J., Racasan, Radu, Blunn, G, Blunt, Liam and Skinner, J. (2013) The taper junction contributes one third of the total volumetric material loss in large diameter metal-on-metal hip arthroplasties. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 19-23 2013, Chicago, IL, USA. (Unpublished)

Hothi, H, Cro, Suzie, Bills, Paul J., Blunt, Liam, Racasan, Radu, Blunn, Gordon, Skinner, J. and Hart, Alister J (2013) Correlation between the detailed visual inspection of retrieved metal-on-metal hips and their volumetric wear. In: International Society for Technology in Arthroplasty 26th Annual Congress, 16-19 October 2013, Palm Beach, Florida, USA. (Unpublished)

Hothi, H, Matthies, Ashley K, Berber, R, Whittaker, R, Bills, Paul J., Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, A. J. (2013) The reliability of a semi-quantitative scoring method for taper corrosion and fretting, and its usefulness for predicting the volume of material loss. In: International Society for Technology in Arthroplasty 26th Annual Congress, 16-19 October 2013, Palm Beach, Florida, USA.

Hothi, H, Matthies, Ashley K, Berber, R, Whittaker, R, Bills, Paul J., Racasan, Radu, Blunt, Liam, Blunn, Gordon, Skinner, John and Hart, A. J. (2014) The reproducibility of a semi-quantitative scoring method for taper corrosion and fretting, and its usefulness for predicting the volume of material loss. In: Orthopaedic Research Society - 60th Annual Meeting, March 15-18 2014, New Orleans, LA, USA. (Unpublished)

Hothi, Harry, Bills, Paul J., Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, Alister J (2014) Bearing Surface Changes Of Retrieved MOM Hips Predict Factors Associated With Failure. In: 15th European Federation of National Associations of Orthopaedics and Traumatology (EFORT) Congress, 4-6 June 2014, London, UK. (Submitted)

Hothi, Harry, Whittaker, Robert, Meswania, Jay, Bills, Paul J., Blunt, Liam, Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, A. J. (2015) Material Loss at the Head Taper Junction of the Metal-on-Metal Pinnacle Total Hip Replacement. In: Orthopaedic Research Society Annual Meeting, March 28-31 2015, Las Vegas, NV, USA. (Submitted)

Joyce, N.J., Fleming, Leigh, Sisodia, Gurudatt, Elnaggar, Mohamed, Chakrabarty, Guatam and Blunt, Liam (2012) Does cementing the tibial keel and peg in a knee replacement affect the pull out strength of the tibial component from the bone - A biomedical study of two cementation techniques. In: EFORT Congress 2012, 23 - 25 May 2012, Berlin. (Unpublished)

Kapadia, Darshil, Racasan, Radu, Al-Hajjar, Mazen and Bills, Paul J. (2016) Characterizing edge-wear in ceramic-on-ceramic acetabular cups. In: International Society for Technology in Arthroplasty (ISTA) 29th Annual Congress, October 5-8 2016, Boston, MA, USA. (Submitted)

Li, Duo (2017) The Challenges in Dimensional Metrology and Machine Tool Metrology. In: The 3rd International Society for NanoManufacturing (ISNM) Summer School, 10-15 July 2017, Tianjin. (Unpublished)

Li, Duo, Jiang, Xiangqian, Blunt, Liam, Tong, Zhen, Williamson, James and Young, Christian (2017) Development of on-machine measurement for ultra-precision machining. In: euspen's 17th International Conference, 29 May - 2 June 2017, Hannover, Germany. (Unpublished)

Li, Tukun, Racasan, Radu and Bills, Paul J. (2016) The evolution of Geometrical Product Specification and Verification in the field of surface metrology and the challenges of its vocational training. In: 12th International Scientific Conference on Coordinate Measuring Technique, 18th - 20th April 2016, Bielsko-BIala, Poland. (Unpublished)

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2013) Applications of Morphological Operations in Surface Metrology and Dimensional Metrology. In: 14th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2013), 17th - 21st June 2013, Taipei, Taiwan.

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2013) Identifying and Characterizing Micro-machining Signatures on Freeform Surfaces Using Morphological Methods. In: Manufacturing the future conference 2013, 17-18 September 2013, Cranfield University, UK. (Unpublished)

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2011) Morphological Filters Based on Motif Combination for Functional Surface Evaluation. In: Proceedings of the 17th International Conference on Automation & Computing, 10 September 2011, University of Huddersfield, Huddersfield.

Lou, Shan, Jiang, Xiang, Zeng, Wenhan, Abdul-Rahman, Hussein S. and Paul, Scott (2015) From planar surfaces based on lattices to freeform surfaces based on triangular meshes: an advanced extension of the areal motif method. In: 15th International Conference on Metrology and Properties of Engineering Surfaces, 2-5 March 2015, Charlotte, North Carolina, USA. (Unpublished)

Lou, Shan, Jiang, Xiang, Zeng, Wenhan and Scott, Paul J. (2014) Slope transform: a theoretical insight into morphological operations in surface measurement. In: 13th CIRP Conference on Computer Aided Tolerancing, 11-14 May 2014, Hangzhou, China.

Lou, Shan, Townsend, Andrew, Jiang, Xiang, Blunt, Liam, Zeng, Wenhan and Paul, Scott (2016) On characterising surface topography of metal powder bed fusion additive manufactured parts. In: euspen's 16th International Conference, 30 May - 3 June 2016, Nottingham, UK.

Matthies, Ashley K, Bills, Paul J., Racasan, Radu, Blunt, Liam, Blunn, Gordon, Skinner, John and Hart, A. J. (2014) Analysis of the taper supports retention of a well-fixed stem in revision surgery of metal-on-metal hip replacements. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 11-15 2014, New Orleans, LA, USA. (Unpublished)

Matthies, Ashley K, Cro, Suzie, Bills, Paul J., Racasan, Radu, Blunt, Liam, Blunn, Gordon, Henckel, Johann, Skinner, John and Hart, A. J. (2014) Which factors determine the volume of material lost from the taper junction of metal-on-metal hip replacements? In: American Academy of Orthopaedic Surgeons Annual Meeting, March 11-15 2014, New Orleans, LA, USA. (Unpublished)

McHugh, M, Bills, Paul J. and Vanin, Stefano (2013) PMI estimation in submerged bones: a new strategy. In: International Conference on Forensic Sciences, 8th-9th July 2013, London. (Unpublished)

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2015) FEA-based design study for optimising non-rigid error detection on machine tools. In: Laser Metrology, Machine Tool, CMM & Robotic Performance (LAMDAMAP), 17th - 18th March, 2015, Univeristy of Huddersfield.

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) Towards obtaining robust boundary condition parameters to aid accuracy in FEA thermal error predictions. In: 2nd Annual EPSRC Manufacturing the Future Conference, 17-18 September 2013, Cranfield University, UK.

Mohamed, Zavid, Blunt, Liam, Young, Christian, Tong, Zhen and Li, Duo (2017) Development of precision polishing machine based on a hexapod. In: euspen's 17th International Conference, 29 May - 2 June 2017, Hannover, Germany. (Unpublished)

Panagiotopoulos, Andreas, Hothi, Harry, Whittaker, Robert, Matthies, Ashley K, Bills, Paul J., Racasan, Radu, Blunt, Liam, Skinner, John and Hart, A. J. (2015) Charactering taper junction wear helps understand the mechanism of failure of metal on metal hip replacements. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 24-28 2015, Las Vegas, NV, USA. (Submitted)

Panagiotopoulos, Andreas, Hothi, Harry, Whittaker, Robert, Meswania, Jay, Bills, Paul J., Racasan, Radu, Blunn, Gordon, Skinner, John and Hart, A. J. (2015) Identifying The Pattern of Material Loss at the Head-Neck Junction Wear Helps Determine the Mechanism of Failure of Metal on Metal Total Hip Replacements. In: Orthopaedic Research Society Annual Meeting, March 28-31 2015, Las Vegas, NV, USA. (Submitted)

Plowucha, Wojciech, Jakubiec, Wladyslaw, Humienny, Zbigniew, Hausotte, Tino, Savio, Enrico, Dragomir, Mihai, Bills, Paul J., Marxer, Michael, Wisla, Norbert and Mathieu, Luc (2014) Geometrical Product Specification and Verification as toolbox to meet up-to-date technical requirements. In: The 11th International Scientific Conference “COORDINATE MEASURING TECHNIQUE” CMT 2014,, 2nd - 4th April 2014, Bielsko-Biala, Poland. (Unpublished)

Qi, Qufen, Scott, Paul J., Jiang, Xiang, Lu, Wenlong and Ding, Hao (2013) The Discussion of Uncertainties in Surface Texture during Design, Manufacture and Measurement. In: The 11th International Symposium of Measurement Technology and Intelligent Instruments, 1st-5th July 2013, RWTH, Aachen, Germany.

Racasan, Radu, Bills, Paul J., Blunt, Liam and Xiao, Shaojun (2013) Measurement of material loss. In: Are Modular Hip Junctions An Issue?, 29th April 2013, The Royal Society of Medicine, London. (Submitted)

Rubio Rodriguez, Luis, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Towards self-optimizing and self-adaptive milling processes. In: Lamdamap 10th International Conference, 20th-21st March 2013, Chicheley Hall Chicheley, Chester, England. (Unpublished)

Shagluf, Abubaker, Longstaff, Andrew P. and Fletcher, Simon (2015) A Preliminary Study of Applying Lean Six Sigma Methods to Machine Tool Measurement. In: Second International Conference on Sustainable Design and Manufacturing, 12th-14th April 2015, Seville, Spain.

Shah, Paras, Racasan, Radu and Bills, Paul J. (2016) Comparison of Different Additive Manufacturing Methods Using Optimized Computed Tomography. In: Dimensional X-Ray Computed Tomography Conference, 10th May 2016, National Physical Laboratory, London, UK. (Unpublished)

Shah, Paras, Racasan, Radu and Bills, Paul J. (2016) Comparison of Different Additive Manufacturing Methods Using Optimized Computed Tomography. In: 6th Conference on Industrial Computed Tomography, 9th -12th February 2016, Wels, Austria.

Shah, Paras, Campbell, Grant M. and Bills, Paul J. (2017) Comparison of Industrial Aerated Structures Using X-Ray Computed Tomography. In: 7th Conference on Industrial Computed Tomography (iCT 2017), February 7 - 9, 2017, Leuven, Belgium. (Unpublished)

Shah, Paras, Racasan, Radu and Bills, Paul J. (2016) Challenges in measurement and specification of complex additive manufactured structures for the medical device industry. In: ASTM Workshop on Additive Manufacturing for Medical Applications, 3rd May 2016, San Antonio, TX, USA. (Unpublished)

Tang, Dawei, Gao, F. and Jiang, Xiang (2014) White Light Channeled Spectrum Interferometry for the On-line Surface Inspection. In: The 3rd Annual EPSRC Manufacturing the Future Conference, 23 Sep-24 Sep 2014, Glasgow Science Centre, Glasgow, UK. (Unpublished)

Tang, Dawei, Gao, Feng and Jiang, Xiangqian (2014) Cylindrical Lenses Based Spectral Domain Low-Coherence Interferometry for On-line Surface Inspection. In: Euspen 14th International Conference & Exhibition, 2nd - 6th June 2014, Dubrovnik, Croatia.

Tang, Dawei, Gao, Feng and Jiang, Xiangqian (2016) Implementation of line-scan dispersive interferometry for defect detection. In: EUSPEN 16th International Conference & Exhibition, 30th May - 3rd June 2016, Nottingham, UK.

Townsend, Andrew, Blunt, Liam and Bills, Paul J. (2016) Investigating the capability of microfocus x-ray computed tomography for areal surface analysis of additively manufactured parts. In: American Society for Precision Engineering Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing, 27th - 30th June 2016, Raleigh, North Carolina, USA.

Townsend, Andrew, Pagani, Luca, Yin, Changji, Bills, Paul J. and Blunt, Liam (2016) Areal surface texture measurement of additively manufactured parts. In: ASTM Workshop on Additive Manufacturing for Medical Applications, 3rd May 2016, San Antonio, TX, USA. (Unpublished)

Townsend, Andrew, Racasan, Radu, Bills, Paul J. and Blunt, Liam (2017) Development of an interlaboratory comparison investigating the generation or areal surface texture per ISO 25178 from XCT. In: 7th Conference on Industrial Computed Tomography (iCT 2017), February 7 - 9, 2017, Leuven, Belgium.

Townsend, Andrew, Racasan, Radu, Bills, Paul J., Thompson, Adam, Senin, Nicola, Leach, Richard K. and Blunt, Liam (2017) Results from an interlaboratory comparison of areal surface texture parameter extraction from X-ray computed tomography of additively manufactured parts. In: euspen's 17th International Conference, 29 May - 2 June 2017, Hannover, Germany.

Wang, J., Jiang, Xiang, Blunt, Liam, Leach, R.K. and Scott, Paul J. (2012) A boundary segmentation algorithm for extracting microscale dimensional parameters in the measurement of structured surfaces. In: euspen 12th International Conference and Exhibition, 4 - 8 June 2012, Stockholm, Sweden. (Unpublished)

Whittaker, Robert, Hothi, Harry, Hexter, Adam, Henckel, Johann, Panagiotidou, Anna, Bills, Paul J., Blunn, Gordon, Skinner, John and Hart, Alister (2014) Component Size Mismatch Of Metal On Metal Hip Arthroplasty: An Avoidable Never Event. In: 15th European Federation of National Associations of Orthopaedics and Traumatology (EFORT) Congress, 4-6 June 2014, London, UK. (Submitted)

Whittaker, Robert, Hothi, Harry, Meswania, Jay, Bills, Paul J., Racasan, Radu, Eskelinen, Antti, Blunn, Gordon, Skinner, John and Hart, A. J. (2015) 36mm Metal-on-Metal Hips have Similar Taper Material Loss Rates as Larger Diameter Hips from the Same Manufacturer. In: American Academy of Orthopaedic Surgeons Annual Meeting, March 24-28 2015, Las Vegas, NV, USA. (Submitted)

Williamson, James, Martin, Haydn and Jiang, Xiang (2013) A Dispersed Reference Interferometer for Surface and Dimensional Metrology. In: Manufacturing the future conference 2013, 17-18 September 2013, Cranfield University, UK.

Young, Christian, Blunt, Liam and Tong, Zhen (2017) Development of an ultra-precision grinding technique for the production of structured micro-patches on ceramics and tool steel. In: euspen's 17th International Conference, 29 May - 2 June 2017, Hannover, Germany.

Zeng, Wenhan, Jiang, Xiang, Lou, Shan, Abdul-Rahman, Hussein S. and Scott, Paul J. (2016) Complex Structured Surface Characterisation by using PDE based Adaptive Nonlinear Diffusion Filter. In: International Workshop on Mathematics and Statistics for Metrology, 7-9th November 2016, Berlin, Germany. (Unpublished)

Zeng, Wenhan, Jiang, Xiang, Lou, Shan and Scott, Paul J. (2016) A Key Point Method for Data Registration for MultiSensor Fusion. In: EUSPEN 16th International Conference & Exhibition, 30th May - 3rd June 2016, Nottingham, UK. (Unpublished)

Book

Jiang, Xiang, Mathieu, Luc and Weckenmann, Albert, eds. (2013) The Twelfth CIRP Conference on Computer Aided Tolerancing. Procedia CIRP, 10 . Elsevier B.V.. ISBN 9781629935973

Li, Tukun (2012) Software Measurement Standards in Surface Metrology: Basics, Concepts, Methods. LAP LAMBERT Academic Publishing, Saarbrücken, Germany. ISBN 978-3659278358

Thesis

Young, Christian (2018) Ultra-precision Abrasive Machining of Functional Structured Surfaces. Doctoral thesis, University of Huddersfield.