Items where Subject is "TJ Mechanical engineering and machinery"

Library of Congress Subject Areas (29146)
- T Technology (5311)
  - TJ Mechanical engineering and machinery (1345)

Group by: Date | Creators | Item Type | Uncontrolled Keywords | No Grouping

3D - Cutting force - Dynamic - Experiment - Peripheral milling - Prediction - Verification 3D-roughness parameters Abrasive Machining abrasive wear Accumulated Deviation Acoustic emission Acoustic-emission active control active steering active steering and guidance adaptive control Additive manufacturing adhesion Aero-acoustics Sound Pumping machinery Pipe Fluid mechanics Sound Pumping machinery Fluid mechanics Aeroacoustics aerodynamic drag Aerodynamics aerostatic air airborne acoustic signals Airborne sound ALE adaptive meshing Alginate Alicona alpha shape analytical model and metrology annular flow ANOVA Antiwear Archard Model Areal texture parameters Artificial Neural Networks asphaltene deposition ASTM Model attenuation Automatic control automation automotive aerodynamics Averaging method axial stiffness axisymmetric ball end milling BeamPROP Bearing fault detection bearings Biodiesel Biofouling biopolymer Bispectrum Blend blockage detection bone cement bootstrap method Boundary conditions Boundary effect boundary layer boundary layer thickness BPM Brake Cooling brake specific fuel consumption bubble diameter bubble rise velocity camera calibration CDM Cellular Automata Centre of Pressure Centre treatment Ceramic-on-ceramic CFD CFRP chip formation clamp load CMM CNC CNC machine tool feed drive Coalescence coefficient combustion characteristics combustion pressure Combustion Process complex structured surface Compressive sensing (CS) Compressor Compressor flow computational fluid dynamics Computational Fluid Dynamics (CFD) computer numerical control (CNC) Computer technology condition monitoring Condition Monitoring Conductive shield Conformity with specifications contact analysis contact angle contact patch contact pressure Control theory Control valves Coordinate metrology copper and iron losses Copper shield Couette flow Crack arrest Crack nucleation creep creep damage creep forces creepage Cross correlation Cuckoo search Current Signature curvature radius cusp depth cusp direction cusp size cutting forces Cutting tools Plasma CVD Diamond-like carbon Surface Characterization cylinder liner cylinder pressure cylindrical lenses dairy industry data Data processing Data compression data mining techniques Database Optimization Decision support Deep learning Density DES design process efficiency Development time Diagnosis Diamond cutting tools Diesel Engine diffusion filter Digital microscope Digital Signal Processing and Imaging dimensional metrology Dimensionless viscosity Directional characteristic Displacement sensor distortion compensation divide-and-conquer drag reduction system Drawing drawing process Drilling Droplets drops dry friction dSPACE Dualsensor probe array Dwell time dynamic behaviour dynamic response dynamic surface roughness early failure early failure detection Eccentric bore eccentricity Eddy current loss Edge-wear efficiency efficient sampling electrical capacitance tomography electrical discharge machining electrical drives Electricity generator electro-hydraulic system Electromechnical devices Electronic apparatus and appliances Encoder energy efficiency energy efficient Energy Storage Energy systems Envelope analysis Environmental Impact Error compensation evaluation Extremely Low Frequency Failure Fatigue fault detection Fault Diagnosis FEA feed drive system femoral stem field-oriented control filtration Finite element finite element analysis finite element method Finite element model finite element software Finite Radon Transform five-axis machine tool flow angle Flow capacity flow interference flow measurement flow visualisation flow-field Fluid magnetic abrasive finishing fluid/structure coupling system Flywheels Focused ion beam Focused ion beams Form error Formula SAE Four-sensor probe fractal Freeform surface characterisation Frequency Division Duplex Fretting Fretting fatigue Fretting map Fretting wear Fretting-fatigue friction Friction heat generation Friction losses Friction reduction Fuel supply system fuel-saving Functional Surface functional surfaces fundamental frequency fundamental frequency game design Game-based learning (GBL) gas-solids fluidized beds Gear box assembly Gear wear Gearbox gearbox fault detection Gearbox monitoring Gellan gum Genetic algorithms Geometry Geometry assessment GM(1 grey-box model grinding Group collaboration in learning hardware in the loop Heat transfer Heat transfer coefficient Helmholtz coil Higher Education Work placements Placement Journeys Video Resources Employers Students Tutors Higher Order of Cognitive Skills (HOCS) Higher Order Statistics highspeed dual plane ERT Hilbert transform Hip Implant Hip prosthesis Hybrid bearings Hyradulic capsule pipeline (HCP) ic engine bearings IEEE802.15.4 image processing Imaging systems implants In-Cylinder Pressure In-Cylinder Temperature inclined surfaces independently rotating wheels Induced voltage induction motor induction motors Injector Fault Instantaneous Angular Speed (IAS) Instrumentation Intelligent machine condition monitoring (CM) intelligent manufacturing intelligent sensing Inter-leaved inverter Interatomic Potentials interference interval order Inverse design inverters IO coupler Ion implantation damage IR slotted photomicro-sensors (SPMs) Irradiation damage Isothermal flat plate KelvinHelmholtz wave key parameter kinetic Energy Knowledge management knowledge structure Kurtogram Kurtosis LabVIEW Laser scanning laser velocimetry lateral displacement Lattice Boltzmann Lean manufacturing Least-cost principle lens LES life-cycle costs Lifting wavelet light absorption method light rail Linear Mixed Models Local processing Longitudinal weld profile Loose abrasive machining Loss reduction Lower Order of Cognitive Skills(LOCS) Lubrication machine dynamic behaviour Machine performance machine tool Machine tool calibration Machine tool errors machine tool model machine tool modeling machine tool performance Machine Tool Spindle Machine tool structural monitoring system Machine vision Machinery Machinery & tools Machinery Automatic control Machinery Testing Machinery Tools Magnetic flux density maintenance manufacturing Marman clamp Mathematics measurement measurement uncertainty mechanical contact Mechanical seals Mechanical shutter mechanical stability mechatronic mechatronic bogie mechatronics MEMS structure Meso-scale metrology Metrology and measurement Micro finishing micro-channels Micromachining Micrometer range microphone array Minimum Depth of Cut Minimum entropy deconvolution (MED) Minimum zone mirror Misalignment missing data Mixing Modal decomposition Model Based Fault Detection Method model-based approach model-based condition monitoring modeling Modelling modelling and simulation Modular structure Modulation signal bispectrum Molecular Dynamics MOM Momentum injection Monte Carlo simulation montonic effects MOPSO morphological filter morphological filters Morphological furrows morphological method morphological operation MOSA Motif analysis motion control Motivated learning motor current and voltage signatures analysis Motor current signal analysis Motor Current Signature Analysis motor current signatures analysis Multi-Carrier Code Division Multiple Access Multi-Carrier Direct Sequence Code Division Multiple Access multi-hole pressure probe Multi-objective optimization Multi-sensor Multi-sensor data acquisition system Multi-stage multibody dynamics multibody model multibody modelling Multipath ultrasonic flow-meter multiple scattering effect MUSIC Algorithm Musical acoustics N) Nanomachining Nanometer removal Nanometer-scale resolution Neural Networks Nigeria Non-Contact Measurement Non-overlap subaperture stitching non-uniform deposits normal forces novel suspension NOx emission Numerical method numerical simulation Nusselt number Oil and gas Oleophilicity Oleophobicity On-line Surface Inspection online condition monitoring optics optics manufacturing telescope robot automation Optimisation Optoelectronics Robotics Vehicles orthogonal cutting Orthogonal Frequency Division Multiplexing Pad abutment Parametric surface Pareto part classification Part library Pattern analysis PDE filter Performance Performance modelling phase measurement Pin-on-disc Test piston slap ploughing POD Polynomial fitting Ported shroud power regeneration Power savings precision machining predictive analysis techniques primary damper Probabilistic Neural Network Profilometry Push-pull alternator Quadric surfaces Radial basis function Rail fatigue rail vehicle rail vehicle dynamic simulations rail vehicle dynamics rails railway applications railway dynamics railway engineering Railway maintenance railway vehicle railway vehicle dynamics railway wheelsets railways Raman spectroscopy RANS real time real-time systems rear wing Reciprocating Compressor Reference wave reflection and transmission characteristics resurfacing Retrieval Analysis Reverse engineering Ride comfort Road handling robot robust adaptive observer robust filtration rollers (machinery) Roughness roughness metrology Roundness measurement rubbing running safety sampling SBES Scuffing segmentation Segmented inverter Self aligning journal bearing Self aligning spherical journal bearing Self-adaptive differential evolution Self-correction arrangement Sendzimir cold rolling sensorless control Sensorless Variable Speed Drive Sensorless VSD Severe service Shaft Misalignment Shape factor short-time Fourier transform Short-time RMS sideband estimator signal processing simulation Size Mismatch SMD softgauges Software measurement standards software-in-the-loop Solid particle erosion Solid-liquid flow sound localization Spectral correlation spectrum analysis speed bump geometry Spindle Error Spiral bevel gear SPM Spragging Square Zernike polynomial Squeeze film effect standardisation statistical analysis stator asymmetries faults stator winding asymmetry and broken rotor bar Stochastic Frontier Analysis stochastic subspace identification strain gauges stress distribution Structured surface structured surfaces Subaperture distribution pattern Support Vector Machine surface Surface Analysis surface finishing surface metrology Surface morphology Surface reconstruction surface roughness surface roughness measurement surface texture surface texture analysis surface topography Surface vibration Surface-mounted suspension modeling suspension modelling Sustainable design Sustainable Engineering Sustainable life value Sustainable manufacturing Synovial Fluid system systematic effects Talysurf Technical Efficiency Testing Laboratories Texturation Texturing thermal efficiency Thermal-elastic coupled method Thermoacoustics three-body abrasion time delay estimation time synchronous averaging Timedomain and Frequency-domain features tool geometry Tooth scuffing topographical features Topography Torsional fretting torsional load capacity Torsional sliding traceability track-based sensors traction systems tractor-trailer traditional engineering Training Transient Performance Transient thermal analysis Transit-time method Travelling-wave tribology turbocharger two-body abrasion Two-phase flow measurement Ultra-precision uncertainty uniform sampling United States URANS V-band clamp V-groove measurement V-section band clamp validation variable speed drive (VSD) Vehicle aerodynamics vehicle dynamics vehicle speed vehicle stability vehicle suspension vehicle tyres inflation vehicle-based sensors Vehicle/track interaction velocity components Velocity distribution Vertical axis wind turbine Vibration Vibration analysis Vibration measurement vibration signal Vibro-Acoustic vibro-acoustic analysis vibro-acoustic monitoring Viscosity volume loss Waste heat recovery water water injection waviness Wear wear debris Wear mechanism Wear models wear prediction wear scar wear test Weight value wettability Wetting wheel profiles wheel arch wheel-rail contact wheel-rail contact model wheel-rail interaction wheel-rail interface Wheel/rail contact forces wheelmotors wheels wheelsets white light channeled spectrum interferometry White light interferometry Wireless Sensor Wireless sensor network (WSN) Wireless sensor node yaw angle ZDDP ZigBee Zinc Dithiophosphate

Number of items at this level: 794.

3D - Cutting force - Dynamic - Experiment - Peripheral milling - Prediction - Verification

Liu, X., Cheung, K., Webb, D., Fiang, X.Q., Xiao, S.J., Longstaff, Andrew P., Widiyarto, H.M. and Jiang, Xiang (2004) Improved dynamic cutting force model in peripheral milling Part 2 Experimental verification and prediction. International Journal of Advanced Manufacturing Technology, 24. pp. 794-805. ISSN 0268-3768

3D-roughness parameters

Deltombe, R., Kubiak, Krzysztof and Bigerelle, M. (2014) How to select the most relevant 3D roughness parameters of a surface. Scanning, 36 (1). pp. 150-160. ISSN 0161-0457

Abrasive Machining

Oluwajobi, Akinjide O. and Chen, Xun (2010) The Effect of Interatomic Potentials on Nanometric Abrasive Machining. In: Proceedings of the 16th International Conference on Automation & Computing, University of Birmingham, Birmingham, UK, 11 September 2010. Chinese Automation and Computing Society in the UK, pp. 130-135. ISBN 9780955529368

Oluwajobi, Akinjide O. and Chen, Xun (2010) The effect of tool geometry on rubbing and ploughing phenomena in nano abrasive machining. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 160-165. ISBN 9781862180932

abrasive wear

Opoz, Tahsin Tecelli and Chen, Xun (2009) Finite element simulation of grinding process and micro-scale abrasive wear. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 165-171. ISBN 9781862180857

Accumulated Deviation

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Condition Monitoring of CI engine running on Biodiesel using Transient Process. Key Engineering Materials, 413-14. pp. 495-503. ISSN 1013-9826

Acoustic emission

Fan, Yibo, Gu, Fengshou and Ball, Andrew (2009) Acoustic Emission Monitoring of Mechanical Seals Using MUSIC Algorithm based on Higher Order Statistics. Key Engineering Materials, 413-41. pp. 811-816. ISSN 1013-9826

Sun, Huanwu, Wang, Juan, Longstaff, Andrew P. and Gu, Fengshou (2017) Characterizing acoustic emission signals for the online monitoring of a fluid magnetic abrasives finishing process. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN 0954-4062

Acoustic-emission

Raharjo, Parno, Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2012) Vibro-Acoustic Characteristic of A Self Aligning Spherical Journal Bearing due to Eccentric Bore Fault. In: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK. (Unpublished)

active control

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew, Fengshou, Gu and Anyakwo, Arthur (2011) Predictive Control Strategies Used to Solve Challenges Related to Modern Railway Vehicles. In: 5th IET Conference on Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 29-30 November 2011, Derby Conference Centre, UK.

active steering

Abobghala, Abdelmenem, Pislaru, Crinela and Iwnicki, S. (2013) Optimising the energy efficiency of rail vehicles by a novel application of integrated active control method for vehicle traction and steering systems. In: Next Generation Rail 2013, 15 - 16 July 2013, The Crystal, London.

active steering and guidance

Stow, Julian, Cooney, Neil, Goodall, Roger M. and Sellick, Rebeka (2017) The use of wheelmotors to provide active steering and guidance for a light rail vehicle. In: The Stephenson Conference: Research for Railways, 25th-27th April 2017, London, UK. (Unpublished)

adaptive control

Additive manufacturing

Lou, Shan, Brown, Stephen, Sun, Wenjuan, Zeng, Wenhan, Abdul-Rahman, Hussein S., Jiang, Xiang and Scott, Paul J. (2017) Use of Morphological Method to Investigate the Influence of Surface Texture on Dimensional Measurement of Additively Manufactured Parts. In: Special Interest Group Meeting: Additive Manufacturing, 10–11 October 2017, Katholieke Universiteit Leuven (KU Leuven), BE.

Lou, Shan, Sun, Wenjuan, Zeng, Wenhan, Abdul-Rahman, Hussein S., Jiang, Xiangqian and Paul, Scott (2016) Extraction of Process Signature Features from Additive Manufactured Metal Surfaces. In: 16th International Conference on Metrology and Properties of Engineering Surfaces, 27th-29th June 2017, Gothenburg, Sweden. (Unpublished)

adhesion

Pislaru, Crinela and Sambo, Bello (2014) Condition-Based Monitoring of Wheel-Rail Interface Using a Novel Multibody Twin Disk Rig Model. In: 6th IET Conference on Railway Condition Monitoring. RCM 2014 . IET, Birmingham, UK, 4.2.3.. ISBN 978-1-84919-913-1

Aero-acoustics Sound Pumping machinery Pipe Fluid mechanics Sound Pumping machinery Fluid mechanics

Ngu, Jude T.A. (1995) The effects of turbulence on organ sound quality and its minimisation in blowing systems. Doctoral thesis, University of Huddersfield.

Aeroacoustics

Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.

aerodynamic drag

Malviya, Vihar, Mishra, Rakesh and Fieldhouse, John D. (2009) CFD Investigation of a Novel Fuel-Saving Device for Articulated Tractor-Trailer Combinations. Engineering Applications of Computational Fluid Mechanics, 3 (4). pp. 587-607. ISSN 1994-2060

Aerodynamics

Malviya, Vihar, Mishra, Rakesh and Gundala, Naresh (2009) CFD-Based Modelling of the Variation of Aerodynamic Coefficients with Wind Angle. In: Proceeding of National Conference on Fluid Mechanics & Fluid Power 17-19 December 2009. College of Engineering Pune, Pune, India.

aerostatic

Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X

air

Castrejon-Pita, J. R., Betton, E. S., Kubiak, Krzysztof, Wilson, M. C. T. and Hutchings, I. M. (2011) The dynamics of the impact and coalescence of droplets on a solid surface. Biomicrofluidics, 5 (1). 014112. ISSN 1932-1058

airborne acoustic signals

Mondal, Debanjan, Gu, Fengshou and Ball, Andrew (2019) Application of Minimum Entropy Deconvolution in Diagnosis of Reciprocating Compressor Faults Based on Airborne Acoustic Analysis. In: 16th International Conference on Condition Monitoring and Asset Management (CM 2019), 25-27 June 2019, Glasgow, UK.

Airborne sound

ALE adaptive meshing

Opoz, Tahsin Tecelli and Chen, Xun (2010) Finite element simulation of chip formation. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 166-171. ISBN 9781862180932

Alginate

Thompson, Martin, Hunt, Ben, Smith, Alan M. and Joyce, Thomas (2015) Wear Tests of a Potential Biolubricant for Orthopedic Biopolymers. Lubricants, 3 (2). pp. 80-90. ISSN 2075-4442

Alicona

Shebani, Amer and Pislaru, Crinela (2015) Wear Measuring and Wear Modelling Based on Archard, ASTM, and Neural Network Models. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 9 (1). pp. 177-182.

alpha shape

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) Application of the morphological alpha shape method to the extraction of topographical features from engineering surfaces. Measurement, 46 (2). pp. 1002-1008. ISSN 0263-2241

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) An Efficient Divide-and-Conquer Algorithm for Morphological Filters. Procedia Engineering: 12th CIRP Conference on Computer Aided Tolerancing, 10. pp. 142-147. ISSN 1877-7058

analytical model

and metrology

Chen, Xiaomei, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2014) Deployment and evaluation of a dual-sensor autofocusing method for on-machine measurement of patterns of small holes on freeform surfaces. Applied Optics, 53 (10). pp. 2246-2255. ISSN 1559-128X

annular flow

Asim, Taimoor, Mishra, Rakesh and Rao, Vasu (2012) Spatiotemporal Growth of Laminar Boundary Layers in a Concentric Annulus. In: Computing and Engineering Researchers’ Conference, March 2012, University of Huddersfield.

ANOVA

Deltombe, R., Kubiak, Krzysztof and Bigerelle, M. (2014) How to select the most relevant 3D roughness parameters of a surface. Scanning, 36 (1). pp. 150-160. ISSN 0161-0457

Antiwear

Kubiak, Krzysztof, Mathia, T. G. and Bigerelle, M. (2012) Influence of roughness on ZDDP tribofilm formation in boundary lubricated fretting. Tribology – Materials, Surfaces \& Interfaces, 6 (4). pp. 182-188. ISSN 1751-5831

Archard Model

Areal texture parameters

Pagani, Luca, Qi, Qunfen, Jiang, Xiangqian and Scott, Paul J. (2017) Towards a new definition of areal surface texture parameters on freeform surface. Measurement, 109. pp. 281-291. ISSN 0263-2241

Artificial Neural Networks

Ahmed, Mahmud, Abdusslam, S.A., Baqqar, Mabrouka, Gu, Fengshou and Ball, Andrew (2011) Fault Classification of Reciprocating Compressor Based on Neural Networks and Support Vector Machines. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

asphaltene deposition

Zhuang, Y., Goharzadeh, A., Lin, Y. J., Yap, Y. F., Chai, John, Mathew, N., Vargas, F. and Biswal, Sibani L. (2017) Experimental study of asphaltene deposition in transparent microchannels using light absorption method. Journal of Dispersion Science and Technology. ISSN 0193-2691

ASTM Model

attenuation

Al-Arbi, Salem, Gu, Fengshou, Guan, Luyang, Ball, Andrew and Naid, A. (2009) Gearbox Fault Diagnosis based on Vibration Signals Measured Remotely. Key Engineering Materials, 413-41. pp. 175-180. ISSN 1013-9826

Automatic control

Pislaru, Crinela (2001) Parameter identification and hybrid mathematical modelling techniques applied to non-linear control systems. Doctoral thesis, University of Huddersfield.

automation

Walker, David D., Yu, Guoyu, Li, Hongyu, Reynolds, Christina and Bibby, Matt (2016) Closing the Metrology – Process Loop in CNC Polishing. SPIE - International Society for Optical Engineering. Proceedings, 10009. ISSN 0277-786X

automotive aerodynamics

Malviya, Vihar, Mishra, Rakesh and Palmer, Edward (2010) CFD Investigation on 3-Dimensional Interference of a Five-Hole Probe in an Automotive Wheel Arch. Advances in Mechanical Engineering, 2010. pp. 1-19. ISSN 1687-8132

Averaging method

Zhou, Hongliang, Ji, Tao, Wang, Ruichen, Ge, Xiaocheng, Tang, Xiaoyu and Tang, Shizhen (2018) Multipath ultrasonic gas flow-meter based on multiple reference waves. Ultrasonics, 82. pp. 145-152. ISSN 0041-624X

axial stiffness

Barrans, Simon, Khodabakhshi, Goodarz and Muller, Matthias (2014) Classical and numerical approaches to determining V-section band clamp axial stiffness. Open Engineering, 5 (1). pp. 99-110. ISSN 2391-5439

axisymmetric

Liu, Dezheng, Xu, Qiang and Lu, Zhongyu (2013) Research in the development of finite element software for creep damage analysis. Journal of communication and computer, 2013 (10). pp. 1019-1030. ISSN 1548-7709

ball end milling

Wojciechowski, S., Maruda, R.W., Barrans, Simon, Nieslony, P. and Krolczyk, G.M. (2017) Optimisation of machining parameters during ball end milling of hardened steel with various surface inclinations. Measurement, 111. pp. 18-28. ISSN 0263-2241

BeamPROP

Yang, Shuming and Jiang, Xiang (2007) The beam propagation method used for the design of an integrated optical coupler. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Bearing fault detection

Tian, Xiange, Xi Gu, James, Rehab, Ibrahim, Abdalla, Gaballa M., Gu, Fengshou and Ball, Andrew (2018) A robust detector for rolling element bearing condition monitoring based on the modulation signal bispectrum and its performance evaluation against the Kurtogram. Mechanical Systems and Signal Processing, 100. pp. 167-187. ISSN 0888-3270

bearings

Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X

Biodiesel

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Powles, Nicholas (2010) Prediction Models for Density and Viscosity of Biodiesel and their Effects on Fuel Supply System in CI Engines. Renewable Energy, 35 (12). pp. 2752-2760. ISSN 0960-1481

Tesfa, Belachew, Mishra, Rakesh, Zhang, Cuiping, Gu, Fengshou and Ball, Andrew (2011) NOx Prediction Based on Cylinder Pressure Measurement for Engine Emission Monitoring. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management. COMADEM, Norway, p. 212. ISBN 0954130723

Biofouling

Lazinni, Gianmarco, Romoli, Luca, Blunt, Liam and Gemini, Laura (2017) Design and characterization of textured surfaces for applications in the food industry. Surface Topography: Metrology and Properties, 5. ISSN 2051-672X

biopolymer

Thompson, Martin, Hunt, Ben, Smith, Alan M. and Joyce, Thomas (2015) Wear Tests of a Potential Biolubricant for Orthopedic Biopolymers. Lubricants, 3 (2). pp. 80-90. ISSN 2075-4442

Bispectrum

Naid, A., Gu, Fengshou, Shao, Yimin, Al-Arbi, Salem and Ball, Andrew (2009) Bispectrum Analysis of Motor Current Signals for Fault Diagnosis of Reciprocating Compressors. Key Engineering Materials, 413-41. pp. 505-511. ISSN 1013-9826

Blend

blockage detection

Duan, Wenbo, Gu, Fengshou, Dupère, Iain, Zhong, Shan and Ball, Andrew (2009) The Effects of Blockage on the Propagation of Acoustic Waves in the Liquid-Shell Coupled System. Key Engineering Materials, 413-41. pp. 327-333. ISSN 1013-9826

bone cement

Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2007) Generation of fretting wear debris at the stem-cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-4.

bootstrap method

Deltombe, R., Kubiak, Krzysztof and Bigerelle, M. (2014) How to select the most relevant 3D roughness parameters of a surface. Scanning, 36 (1). pp. 150-160. ISSN 0161-0457

Boundary conditions

Chen, Lei, Liu, Gang, Zhang, Guozhong, Tang, Yuannan and Chai, John (2017) Asymptotic Analyses of the Start-Up Stage of Couette Flow Subjected to Different Boundary Conditions. International Communications in Heat and Mass Transfer, 88. pp. 177-182. ISSN 0735-1933

Boundary effect

Zhang, X., Jiang, Xiang and Crampton, Andrew (2007) Numerical Analysis of the Boundary Effect of Radial Basis Functions in 3D Surface Reconstruction. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

boundary layer

Asim, Taimoor, Mishra, Rakesh and Rao, Vasu (2012) Effect of Eccentricity on Pipe Boundary Layer Growth for Flows in Annulus. In: Computing and Engineering Researchers’ Conference, March 2012, University of Huddersfield.

boundary layer thickness

BPM

Brake Cooling

Palmer, Edward and Fieldhouse, John D. (2007) Comparison of air flow and heat dissipation from the front brakes fitted to a high performance GT Car. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-8.

brake specific fuel consumption

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2011) Combustion Characteristics of CI Engine Running with Biodiesel Blends. In: International Conference on Renewable Energies and Power Quality (ICREPQ'11), 13-15 April 2011, Las Palmas de Gran Canaria, Spain.

bubble diameter

Li, Xiaoxu, Jaworski, Artur and Mao, Xiaoan (2018) Bubble size and bubble rise velocity estimation by means of electrical capacitance tomography within gas-solids fluidized beds. Measurement, 117. pp. 226-240. ISSN 0263-2241

bubble rise velocity

camera calibration

Xu, Yongjia, Gao, Feng, Ren, Hongyu, Zhang, Zonghua and Jiang, Xiangqian (2017) An iterative distortion compensation algorithm for camera calibration based on phase target. Sensors, 17 (6). p. 1188. ISSN 1424-8220

CDM

Cellular Automata

Oluwajobi, Akinjide O. and Chen, Xun (2009) Cellular automata modelling of micro abrasive machining. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 159-164. ISBN 9781862180857

Centre of Pressure

Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2010) Investigation of brake squeal and the influence of the abutment faces. In: Proceedings of 6th European Conference on Braking, JEF 2010. European Conference on Braking . Groupement Regional Nord/Pas-de-Calais pour la Recherche dans les Transports, Universite de Lille 1, France, pp. 255-262.

Centre treatment

Ceramic-on-ceramic

Kapadia, Darshil, Racasan, Radu, Pagani, Luca, Al-Hajjar, Mazen and Bills, Paul J. (2017) Method for volumetric assessment of edge-wear in ceramic-on-ceramic acetabular liners. Wear, 376-77 (Part A). pp. 236-242. ISSN 0043-1648

CFD

Albarzenji, Dlir and Mishra, Rakesh (2017) A Novel Technique to Reduce Measurement Errors due to Flow–Sensor Interactions in Multi-‎Sensor Conductivity Probes. In: COMADEM 2017, 10-13 July 2017, University of Central Lancaster, UK. (Unpublished)

Colley, Gareth, Mishra, Rakesh, Rao, H.V. and Woolhead, R. (2009) Performance evaluation of three cross flow vertical axis wind turbine configurations. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 130-136. ISBN 9781862180857

Jackson, Frankie. F (2018) Aerodynamic optimisation of Formula student vehicle using computational fluid dynamics. Fields: journal of Huddersfield student research, 4 (1). ISSN 2057-0163

Malviya, Vihar, Mishra, Rakesh, Palmer, Edward and Majumdar, Bireswar (2007) Numerical analysis and optimisation of multi-hole pressure probe geometry. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-8.

Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.

Sharma, Sidharath, Jupp, Martyn, Barrans, Simon and Nickson, Keith (2017) The impact of housing features relative location on a turbocharger compressor flow. International Journal of Mechanical Engineering and Robotics Research, 6 (6). pp. 451-457. ISSN 2278-0149

CFRP

Al-Wandi, Sinan, Pan, Wencheng, Ding, Songlin and P.T. Mo, John (2016) Meso-scale Modeling of the Drilling of Carbon Fibre Reinforced Plastic: Geometry and Numerical Analysis. Universal Journal of Mechanical Engineering, 4 (4). pp. 75-82. ISSN 2332-3353

chip formation

clamp load

Barrans, Simon, Khodabakhshi, G. and Xu, Qiang (2014) Contact Pressure Distribution in Joints Formed by V-Band Clamps. Advanced Materials Research, 1016. pp. 34-38. ISSN 1662-8985

CMM

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2014) Rapid and accurate reverse engineering of geometry based on a multi-sensor system. International Journal of Advanced Manufacturing Technology, 74 (1-4). pp. 369-382. ISSN 0268-3768

CNC

Abdulshahed, Ali, Longstaff, Andrew P. and Fletcher, Simon (2017) A cuckoo search optimisation-based Grey prediction model for thermal error compensation on CNC machine tools. Grey Systems: Theory and Application, 7 (2). pp. 146-155. ISSN 2043-9377

CNC machine tool feed drive

Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2012) Five-Axis Machine Tool Condition Monitoring Using dSPACE Real-Time System. Journal of Physics: Conference Series, 364. 012091. ISSN 1742-6596

Coalescence

Castrejon-Pita, J. R., Kubiak, Krzysztof, Castrejon-Pita, A. A., Wilson, M. C. T. and Hutchings, I. M. (2013) Mixing and internal dynamics of droplets impacting and coalescing on a solid surface. Physical Review B, 88. 023023. ISSN 1098-0121

coefficient

combustion characteristics

combustion pressure

Li, Guoxing, Gu, Fengshou, Wang, Tie, Yang, Tiantian and Ball, Andrew (2017) Investigation into the dynamic response of cylinder liners in an IC engine based on a validated finite-element model. Systems Science & Control Engineering, 5 (1). pp. 56-69. ISSN 2164-2583

Combustion Process

Aburass, Ali, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) Combustion Diagnostics of a Diesel Engine with Biodiesel Fuels based on Vibro-acoustics and In-Cylinder Pressure Measurements. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 13-18. ISBN 9781862181212

complex structured surface

Zeng, Wenhan, Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2017) A new framework for Charactersation of Complex Structured Surface. In: Met & Props 2017, 27th-29th June 2017, Gothenburg, Sweeden. (In Press)

Compressive sensing (CS)

Tang, Xiaoli (2020) Investigation of Data Compression Methods for Intelligent Machine Condition Monitoring. Doctoral thesis, University of Huddersfield.

Compressor

Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.

Compressor flow

computational fluid dynamics

Computational Fluid Dynamics (CFD)

Asim, Taimoor, Charlton, Matthew and Mishra, Rakesh (2017) CFD based Investigations for the Design of Severe Service Control Valves used in Energy Systems. Energy Conversion and Management, 153. pp. 288-303. ISSN 0196-8904

computer numerical control (CNC)

Pislaru, Crinela (2013) A Review on Real-Time Simulation of CNC Machine Tool Dynamics. International Journal of Mechanical Engineering, 2 (5). pp. 39-44. ISSN 2319-2240

Computer technology

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2006) Computer Assisted Laboratory Instructions: Learning Outcomes Analysis. In: Proceedings of IV international conference on multimedia and information and communication technologies in communication. m-ICTE, Seville, Spain, pp. 330-341. ISBN 8469024698

Abdulrasool, Salah Mahdi, Mishra, Rakesh, Fieldhouse, John D., Ward, Steve and McComish, John (2006) Effect of integration of computer simulations in traditional teaching methodology. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, UK, pp. 1-8.

condition monitoring

Condition Monitoring

Abusaad, Samieh, Benghozzi, Ahmed, Shao, Yimin, Gu, Fengshou and Ball, Andrew (2013) Utilizing Data from a Sensorless AC Variable Speed Drive for Detecting Mechanical Misalignments. Key Engineering Materials, 569. pp. 465-472. ISSN 1013-9826

Abusaad, Samieh, Benghozzi, Ahmed, Smith, Ann, Gu, Fengshou and Ball, Andrew (2015) The Detection of Shaft Misalignments using Motor Current Signals from a Sensorless Variable Speed Drive. In: Vibration Engineering and Technology of Machinery. Mechanisms and Machine Science (23). Springer, London, pp. 173-183. ISBN 978-3-319-09918-7

Ahmed, Mahmud and Gu, Fengshou (2010) Fault classification using an Artificial Neural Network based on Vibrations from a Reciprocating Compressor. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 92-97. ISBN 9781862180932

Anyakwo, Arthur, Pislaru, Crinela and Ball, Andrew (2012) A New Method for Modelling and Simulation of the Dynamic Behaviour of the Wheel-rail contact. International Journal of Automation and Computing, 9 (3). pp. 237-247. ISSN 1476-8186

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Fengshou, Gu (2011) Modelling the Dynamic Behaviour of the Wheel-Rail Interface by Using a Novel 3D Wheel-Rail Contact Model. In: 5th IET Conference on Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 29-30 November 2011, Derby Conference Centre, UK.

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modelling and simulation of dynamic wheel-rail interaction using a roller rig. Journal of Physics: Conference Series, 364. 012060. ISSN 1742-6596

Baqqar, Mabrouka, Gu, Fengshou and Lu, Joan (2010) Machine Performance and Condition Monitoring Through Data Mining and Database Optimization. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 186. ISBN 9781862180932

Feng, Guojin, Zhen, Dong, Aliwan, M., Gu, Fengshou and Ball, Andrew (2013) Investigation of Wireless Protocols for Remote Condition Monitoring. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 19-24. ISBN 9781862181212

Hamed, M., Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2013) A study of the influence of vehicle tyre pressure on suspension system response using a full car model. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 7-12. ISBN 9781862181212

Moamar, Hamed, Tesfa, Belachew, Fengshou, Gu and Ball, Andrew (2014) Vehicle Suspension Performance Analysis Based on Full Vehicle Model for Condition Monitoring Development. In: VETOMAC-X 2014, 9-11th September 2014, University of Manchester, UK. (Unpublished)

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modern techniques for condition monitoring of railway vehicle dynamics. Journal of Physics: Conference Series, 364. 012016. ISSN 1742-6596

Pislaru, Crinela, Lane, Mark, Ball, Andrew and Gu, Fengshou (2012) Fault Detection of Gearbox from Inverter Signals Using Advanced Signal Processing Techniques. Journal of Physics: Conference Series, 364. 012080. ISSN 1742-6596

Willoughby, P, Verma, M, Longstaff, Andrew P. and Fletcher, Simon (2010) A Holistic Approach to Quantifying and Controlling the Accuracy, Performance and Availability of Machine Tools. In: Proceedings of the 36th International MATADOR Conference. Springer, London, UK, pp. 313-316. ISBN 978-1-84996-431-9

Conductive shield

Al-Ani, Mahir, Barrans, Simon and Carter, J. (2017) Electromagnetic and Mechanical Analysis of High Speed SPM Rotor with Copper Shield. 2017 IEEE International Electric Machines & Drives Conference (IEMDC).

Conformity with specifications

Ding, Hao, Scott, Paul J. and Jiang, Xiang (2014) A criterion for comparing measurement results and determining conformity with specifications. In: 13th CIRP Conference on Computer Aided Tolerancing, 11th-14th May 2014, Hangzhou, China. (Unpublished)

contact analysis

Muller, Matthias and Barrans, Simon (2010) Predicting and determining the contact pressure distribution in joints formed by v-band clamps. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 154-159. ISBN 9781862180932

contact angle

Kubiak, Krzysztof, Wilson, M. C. T., Mathia, T. G. and Carras, S. (2011) Dynamics of contact line motion during the wetting of rough surfaces and correlation with topographical surface parameters. Scanning, 33 (5). pp. 370-377. ISSN 0161-0457

contact patch

contact pressure

Barrans, Simon, Khodabakhshi, G. and Xu, Qiang (2014) Contact Pressure Distribution in Joints Formed by V-Band Clamps. Advanced Materials Research, 1016. pp. 34-38. ISSN 1662-8985

Control theory

Pislaru, Crinela (2001) Parameter identification and hybrid mathematical modelling techniques applied to non-linear control systems. Doctoral thesis, University of Huddersfield.

Control valves

Coordinate metrology

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

copper and iron losses

Ashari, Djoni, Pislaru, Crinela and Ball, Andrew (2012) Energy Optimisation of Sensorless Induction Motor Drives Using a Novel Robust-Adaptive Flux Simulator. In: The 2nd International Electric Drives Production Conference, 15th - 18th October 2012, Nuremberg, Germany. (Unpublished)

Copper shield

Couette flow

Crack arrest

Fouvry, S., Nowell, D., Kubiak, Krzysztof and Hills, D.A. (2008) Prediction of fretting crack propagation based on a short crack methodology. Engineering Fracture Mechanics, 75 (6). 1605 - 1622. ISSN 0013-7944

Crack nucleation

Fouvry, S. and Kubiak, Krzysztof (2009) Development of a fretting-fatigue mapping concept: The effect of material properties and surface treatments. Wear, 267 (12). 2186 - 2199. ISSN 0043-1648

creep

creep damage

creep forces

creepage

Cross correlation

Cuckoo search

Current Signature

curvature radius

Bigerelle, M., Nianga, J.M., Najjar, D., Iost, A., Hubert, C. and Kubiak, Krzysztof (2013) Roughness Signature of Tribological Contact Calculated by a New Method of Peaks Curvature Radius Estimation on Fractal Surfaces. Tribology International, 65. pp. 235-247. ISSN 0301-679X

Hubert, C., Kubiak, Krzysztof, Bigerelle, M., Dubois, A. and Dubar, L. (2015) Identification of lubrication regime on textured surfaces by multi-scale decomposition. Tribology International, 82 (B). pp. 375-386. ISSN 0301-679X

cusp depth

Tabriz, Md Shams E. and Barrans, Simon (2018) Effect of cusp size, depth and direction on stress concentration. International Journal of Materials, Mechanics and Manufacturing, 6 (2). pp. 88-93. ISSN 1793-8198

cusp direction

cusp size

cutting forces

Cutting tools Plasma CVD Diamond-like carbon Surface Characterization

Zolgharni, M, Jones, Benjamin, Bulpett, R, Anson, A.W. and Franks, J (2008) Energy Efficiency Improvements in Dry Drilling with Optimised Diamond-Like Carbon Coating. Diamond and Related Materials, 17 (7). pp. 1733-1737. ISSN 0925-9635

cylinder liner

cylinder pressure

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2012) Water Injection Effects on the Performance and Emission Characteristics of a CI Engine Operating with Biodiesel. Renewable Energy, 37 (1). pp. 333-344. ISSN 0960-1481

cylindrical lenses

Tang, Dawei, Gao, F. and Jiang, Xiang (2014) White Light Channeled Spectrum Interferometry for the On-line Surface Inspection. In: The 3rd Annual EPSRC Manufacturing the Future Conference, 23 Sep-24 Sep 2014, Glasgow Science Centre, Glasgow, UK. (Unpublished)

dairy industry

data

Perkins, Chris J, Longstaff, Andrew P., Fletcher, Simon, Willoughby, P and Verma, Rocky (2010) Limitations of Data Handling within the Machine Tool Service environment. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 192. ISBN 9781862180932

Data processing

Zhen, Dong, James, Gu, Tie, Wang, Fengshou, Gu and Ball, Andrew (2010) Diagnostic Feature Development based on Dynamic Time Warping of Dynamic Signals under Variable Machine Operating Condition. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK.

Data compression

Tang, Xiaoli (2020) Investigation of Data Compression Methods for Intelligent Machine Condition Monitoring. Doctoral thesis, University of Huddersfield.

data mining techniques

Database Optimization

Decision support

Shagluf, Abubaker, Parkinson, Simon, Longstaff, Andrew P. and Fletcher, Simon (2018) Adaptive decision support for suggesting a machine tool maintenance strategy: from reactive to preventative. Journal of Quality in Maintenance Engineering, 24 (3). pp. 376-399. ISSN 1355-2511

Deep learning

Tang, Xiaoli (2020) Investigation of Data Compression Methods for Intelligent Machine Condition Monitoring. Doctoral thesis, University of Huddersfield.

Density

DES

Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.

design process efficiency

Barrans, Simon, Eyre, Gareth and Goddard, Michael (2015) Bespoke Part Library for an SME for Enhanced Design Efficiency. Applied Mechanics and Materials, 798. pp. 500-504. ISSN 1662-7482

Development time

Diagnosis

Diamond cutting tools

Tong, Zhen, Jiang, Xiang, Bai, Qingshun and Blunt, Liam (2017) Atomistic investigation of FIB-induced damage in diamond cutting tools under various ion irradiation conditions. In: 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017, 29 May - 2 June 2017, Hannover. (Unpublished)

Diesel Engine

diffusion filter

Digital microscope

Digital Signal Processing and Imaging

dimensional metrology

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2013) Applications of Morphological Operations in Surface Metrology and Dimensional Metrology. In: 14th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2013), 17th - 21st June 2013, Taipei, Taiwan.

Dimensionless viscosity

Directional characteristic

Lu, Wenlong, Yu, Nengguo, Zou, Xianglong, Liu, Xiaojun, Zhou, Liping and Li, Tukun (2015) Evaluation of MEMS Structures with Directional Characteristics Based on FRAT and Lifting Wavelet. Procedia CIRP, 27. pp. 298-302. ISSN 2212-8271

Displacement sensor

Potdar, Akshay Anand, Fletcher, Simon and Longstaff, Andrew P. (2016) Performance characterisation of a new photo-microsensor based sensing head for displacement measurement. Sensors and Actuators A: Physical, 238. pp. 60-70. ISSN 09244247

distortion compensation

divide-and-conquer

drag reduction system

Jackson, Frankie. F (2018) Aerodynamic optimisation of Formula student vehicle using computational fluid dynamics. Fields: journal of Huddersfield student research, 4 (1). ISSN 2057-0163

Drawing

Hubert, Cedric, Kubiak, Krzysztof, Bigerelle, Maxence and Dubar, Laurent (2014) Identification of Local Lubrication Regimes on Textured Surfaces by 3D Roughness Curvature Radius. Advanced Materials Research, 966-96. pp. 120-125. ISSN 1662-8985

drawing process

Drilling

Droplets

drops

dry friction

Kubiak, Krzysztof, Bigerelle, M., Mathia, T. G., Dubois, A. and Dubar, L. (2014) Dynamic evolution of interface roughness during friction and wear processes. Scanning, 36 (1). pp. 30-38. ISSN 0161-0457

dSPACE

Sztendel, S., Papananias, M. and Pislaru, Crinela (2015) Improving the Dynamic Performance of Five-Axis CNC Machine Tool by using the Software-in-the-Loop (SIL) Platform. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 170-180. ISBN 978-0-9566790-5-5

Dualsensor probe array

Zhao, Xin and Lucas, Gary (2010) Characterisation of the mean and time dependent properties of inclined oilinwater pipe flows using dualsensor probes. In: 6th World Congress on Industrial Process Tomography, 6-9 September 2010, Beihang Conference Center, Beihang University, China.

Dwell time

Sabouri, A., Anthony, C. J., Bowen, J., Vishnyakov, Vladimir and Prewett, P. D. (2014) The effects of dwell time on focused ion beam machining of silicon. Microelectronic Engineering, 121. pp. 24-26. ISSN 0167-9317

dynamic behaviour

dynamic response

dynamic surface roughness

early failure

Raharjo, Parno, Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2010) Early Failure Detection and Diagnostics of High Speed Self Aligning Journal Bearing. In: COMADEM 2010, June 28-July 2 2010, Nara, Japan. (Unpublished)

early failure detection

Raharjo, Parno, Gu, J., Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Early Failure Detection and Diagnostics of Self-Aligning Journal Bearing through Vibro-acoustic Analysis. In: CM 2010 and MFPT 2010 The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, England. (Unpublished)

Eccentric bore

eccentricity

Eddy current loss

Al-Ani, Mahir, Barrans, Simon and Carter, J. (2017) Rotor loss reduction using segmented inverter in surface-mounted permanent magnet drive. Proceedings of the 2017 IEEE International Electric Machines and Drives Conference (IEMDC) 2017.

Edge-wear

efficiency

efficient sampling

Wang, Jian (2012) Sampling for the Measurement of Structured Surfaces. Doctoral thesis, University of Huddersfield.

electrical capacitance tomography

electrical discharge machining

Deltombe, R., Kubiak, Krzysztof and Bigerelle, M. (2014) How to select the most relevant 3D roughness parameters of a surface. Scanning, 36 (1). pp. 150-160. ISSN 0161-0457

electrical drives

Electricity generator

Hamood, Ahmed, Jaworski, Artur, Mao, Xiaoan and Simpson, Kevin (2018) Design and construction of a two-stage thermoacoustic electricity generator with push-pull linear alternator. Energy, 144. pp. 61-72. ISSN 0360-5442

electro-hydraulic system

Shi, John Z., Gu, Fengshou, Lennox, Barry and Ball, Andrew (2009) A Grey-box Modelling and Its Application in Model-based Fault Detection. International Journal of COMADEM, 12 (1). pp. 21-30. ISSN 1363-7681

Electromechnical devices

Pislaru, Crinela (2001) Parameter identification and hybrid mathematical modelling techniques applied to non-linear control systems. Doctoral thesis, University of Huddersfield.

Electronic apparatus and appliances

Pislaru, Crinela (2001) Parameter identification and hybrid mathematical modelling techniques applied to non-linear control systems. Doctoral thesis, University of Huddersfield.

Encoder

Arebi, Lufti, Gu, Fengshou and Ball, Andrew (2010) Rotor Misalignment Detection using a Wireless Sensor and a Shaft Encoder. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 6-13. ISBN 9781862180932

energy efficiency

energy efficient

Energy Storage

Johnson, Anthony, Dooley, Martin, Gibson, Andrew and Barrans, S M (2012) Practical Energy Storage Utilising Kinetic Energy Storage Batteries (KESB). In: 2nd International Symposium on Environment-Friendly Energies and Applications (EFEA), 25 - 27 June 2012, Northumbria University, UK.

Energy systems

Envelope analysis

Feng, Guojin, Zhao, H., Gu, Fengshou, Needham, Paul M. and Ball, Andrew (2017) Efficient implementation of envelope analysis on resources limited wireless sensor nodes for accurate bearing fault diagnosis. Measurement, 110. pp. 307-318. ISSN 0263-2241

Haba, Usama, Feng, Guojin, Shaeboub, Abdulkarim, Peng, Xinyu, Gu, Fengshou and Ball, Andrew (2016) Detection and Diagnosis of Compound Faults in a Reciprocating Compressor based on Motor Current Signatures. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Environmental Impact

Error compensation

Postlethwaite, Scott R. (1992) Electronic based accuracy enhancement of CNC machine tools. Doctoral thesis, Huddersfield Polytechnic.

evaluation

Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2009) Evaluation Of Fretting Wear On The Femoral Stem Surface. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco.

Extremely Low Frequency

Alaiwi, A, Sibley, Martin J.N., Mather, Peter and Holmes, Violeta (2009) Extremely low frequency based communication link. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 105-110. ISBN 9781862180857

Failure

Whittaker, Robert, Hothi, Harry, Hexter, Adam, Henckel, Johann, Panagiotidou, Anna, Bills, Paul J., Blunn, Gordon, Skinner, John and Hart, Alister (2014) Component Size Mismatch Of Metal On Metal Hip Arthroplasty: An Avoidable Never Event. In: 15th European Federation of National Associations of Orthopaedics and Traumatology (EFORT) Congress, 4-6 June 2014, London, UK. (Submitted)

Fatigue

Radhi, H.E. and Barrans, Simon (2010) Finite Element Analysis of Effect of Weld Toe Radius and Plate Thickness on Fatigue Life of Butt Welded Joint. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 60-64. ISBN 9781862180932

fault detection

Fault Diagnosis

FEA

feed drive system

Pislaru, Crinela (2013) A Review on Real-Time Simulation of CNC Machine Tool Dynamics. International Journal of Mechanical Engineering, 2 (5). pp. 39-44. ISSN 2319-2240

femoral stem

Brown, L., Zhang, H. and Blunt, Liam (2009) Investigation of a possible wear mechanism at the cement head interface in hip resurfacing arthroplasty. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco. (Submitted)

field-oriented control

filtration

Finite element

finite element analysis

Sahboun, Salahaddin and Barrans, Simon (2015) Simulating Torsional Slip in V-band Clamp Joints. Applied Mechanics and Materials, 798. pp. 53-58. ISSN 1662-7482

finite element method

Finite element model

finite element software

Finite Radon Transform

five-axis machine tool

Papananias, M., Sztendel, S. and Pislaru, Crinela (2015) Development of a Novel MultiBody Mechatronic Model for Five-Axis CNC Machine Tool. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 379-389. ISBN 978-0-9566790-5-5

flow angle

Flow capacity

flow interference

flow measurement

flow visualisation

flow-field

Fluid magnetic abrasive finishing

fluid/structure coupling system

Flywheels

Focused ion beam

Focused ion beams

Form error

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

Formula SAE

Jackson, Frankie. F (2018) Aerodynamic optimisation of Formula student vehicle using computational fluid dynamics. Fields: journal of Huddersfield student research, 4 (1). ISSN 2057-0163

Four-sensor probe

fractal

Freeform surface characterisation

Pagani, Luca, Qi, Qunfen, Jiang, Xiangqian and Scott, Paul J. (2017) Towards a new definition of areal surface texture parameters on freeform surface. Measurement, 109. pp. 281-291. ISSN 0263-2241

Frequency Division Duplex

Fretting

Kubiak, Krzysztof, Fouvry, S. and Marechal, A.M. (2005) A practical methodology to select fretting palliatives: Application to shot peening, hard chromium and WC-Co coatings. Wear, 259 (1). 367 - 376. ISSN 0043-1648

Fretting fatigue

Kubiak, Krzysztof, Fouvry, S., Marechal, A.M. and Vernet, J.M. (2006) Behaviour of shot peening combined with WC-Co HVOF coating under complex fretting wear and fretting fatigue loading conditions. Surface and Coatings Technology, 201 (4). 4323 - 4328. ISSN 0257-8972

Meriaux, J., Fouvry, S., Kubiak, Krzysztof and Deyber, S. (2010) Characterization of crack nucleation in TA6V under fretting-fatigue loading using the potential drop technique. International Journal of Fatigue, 32 (10). 1658 - 1668. ISSN 0142-1123

Fretting map

Kubiak, Krzysztof, Mathia, T.G. and Fouvry, S. (2010) Interface roughness effect on friction map under fretting contact conditions. Tribology International, 43 (8). 1500 - 1507. ISSN 0301-679X

Fretting wear

Kubiak, Krzysztof, Liskiewicz, T.W. and Mathia, T.G. (2011) Surface morphology in engineering applications: Influence of roughness on sliding and wear in dry fretting. Tribology International, 44 (11). pp. 1427-1432. ISSN 0301-679X

Fretting-fatigue

Fouvry, S. and Kubiak, Krzysztof (2009) Introduction of a fretting-fatigue mapping concept: Development of a dual crack nucleation - crack propagation approach to formalize fretting-fatigue damage. International Journal of Fatigue, 31 (8). 250 - 262. ISSN 0142-1123

friction

Sahboun, Salahaddin and Barrans, Simon (2015) Simulating Torsional Slip in V-band Clamp Joints. Applied Mechanics and Materials, 798. pp. 53-58. ISSN 1662-7482

Zhang, Po, Lu, Wenlong, Liu, Xiaojun, Zhai, Wenzheng, Zhou, Mingzhuo and Zeng, Wenhan (2018) Torsional fretting and torsional sliding wear behaviors of CuNiAl against 42CrMo4 under dry condition. Tribology International, 118. pp. 11-19. ISSN 0301-679X

Friction heat generation

Wang, Yanzhong, Tang, Wen, Chen, Yanyan, Wang, Tie, Li, Guoxing and Ball, Andrew (2017) Investigation into the meshing friction heat generation and transient thermal characteristics of spiral bevel gears. Applied Thermal Engineering, 119. pp. 245-253. ISSN 1359-4311

Friction losses

Herapath, Colin, Barrans, S M and Weston, W (2011) A Comparison of Design Methodologies for Journal Bearings under Pulsatile Loads. In: International Conference on Renewable Energies and Power Quality (ICREPQ'11), 13-15 April 2011, Las Palmas de Gran Canaria, Spain.

Friction reduction

Wilkinson, Adam, Chen, Xun and Blunt, Liam (2010) Experimentation to Reduce Friction from Novel Abrasive Tape Polishing Method. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 54-59. ISBN 9781862180932

Fuel supply system

fuel-saving

Functional Surface

Young, Christian, Blunt, Liam, Mohamed, Zavid and Tong, Zhen (2016) Development of ultra-precision abrasive machining of functional structured surfaces. In: The euspen’s 16th international conference & exhibition, 30 May 2016, Notthingham.

functional surfaces

fundamental frequency

game design

Mavromihales, Mike and Holmes, Violeta (2016) Review of Research in Games-based Approaches with Examples in Engineering Education. In: CARN International Conference, 11-14 November 2016, Lincoln, UK.

Game-based learning (GBL)

gas-solids fluidized beds

Gear box assembly

Fish, Michael Anderson (1998) Transmission errors in precision worm gear drives. Doctoral thesis, University of Huddersfield.

Gear wear

Zhang, Ruiliang, Gu, Fengshou, Mansaf, Haram, Wang, Tie and Ball, Andrew D. (2017) Gear wear monitoring by modulation signal bispectrum based on motor current signal analysis. Mechanical Systems and Signal Processing, 94. pp. 202-213. ISSN 08883270

Zhang, Ruiliang, Gu, Xi, Gu, Fengshou, Wang, Tie and Ball, Andrew (2017) Gear wear process monitoring using a sideband estimator based on modulation signal bispectrum. Applied Sciences, 7 (3). p. 274. ISSN 2076-3417

Gearbox

gearbox fault detection

Gearbox monitoring

Gellan gum

Thompson, Martin, Hunt, Ben, Smith, Alan M. and Joyce, Thomas (2015) Wear Tests of a Potential Biolubricant for Orthopedic Biopolymers. Lubricants, 3 (2). pp. 80-90. ISSN 2075-4442

Genetic algorithms

Radhi, H.E. and Barrans, Simon (2011) Comparison between Multiobjective Population-Based Algorithms in Mechanical Problem. Applied Mechanics and Materials, 110-16. pp. 2383-2389. ISSN 1662-7482

Geometry

Fish, Michael Anderson (1998) Transmission errors in precision worm gear drives. Doctoral thesis, University of Huddersfield.

Geometry assessment

Grossoni, Ilaria, Shackleton, Philip, Bezin, Yann and Jaiswal, Jay (2017) Longitudinal rail weld geometry control and assessment criteria. Engineering Failure Analysis, 80. pp. 352-367. ISSN 1350-6307

GM(1

grey-box model

grinding

Alabed, Asmaa and Chen, Xun (2009) Development of a knowledge warehouse for grinding. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 99-104. ISBN 9781862180857

Group collaboration in learning

hardware in the loop

Pislaru, Crinela (2013) A Review on Real-Time Simulation of CNC Machine Tool Dynamics. International Journal of Mechanical Engineering, 2 (5). pp. 39-44. ISSN 2319-2240

Heat transfer

Heat transfer coefficient

Stetsyuk, V., Kubiak, Krzysztof, Liu, Lande and Chai, John (2017) An alternative approach to evaluate the average Nusselt number for mixed boundary layer conditions in parallel flow over an isothermal flat plate. International Journal of Mechanical Engineering Education. ISSN 0306-4190

Helmholtz coil

Lucas, Gary and Leeungculsatien, Teerachai (2010) A New Method of Measuring Velocity Profiles using a MultiElectrode Electromagnetic Flow Meter. In: 6th World Congress on Industrial Process Tomography, 6-9 September 2010, Beihang Conference Center, Beihang University, China.

Higher Education Work placements Placement Journeys Video Resources Employers Students Tutors

Ward, Lisa J. and Gaffikin, Jane A. (2009) Student Placement Journeys - An On-line collection of video resources showcasing the development of students on one year work placements with the views from their employers and placement tutors. In: 18th World Conference for Co-operative Education, 'An International Dialogue in Vancouver', July, 2009, Vancouver, Canada. (Unpublished)

Higher Order of Cognitive Skills (HOCS)

Abdulrasool, Salah Mahdi and Mishra, Rakesh (2010) Learning and Teaching Mechanical Engineering Courses with Blended Learning Environment - Higher Order Application of Bloom’s Taxonomy. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 84-91. ISBN 9781862180932

Higher Order Statistics

highspeed dual plane ERT

Hilbert transform

Hip Implant

Hip prosthesis

Hybrid bearings

Hyradulic capsule pipeline (HCP)

Asim, Taimoor, Algadhi, Abdulamagid and Mishra, Rakesh (2018) Effect of Capsule Shape on Hydrodynamic Characteristics and Optimal Design of Hydraulic Capsule Pipelines. Journal of Petroleum Science and Engineering, 161. pp. 390-408. ISSN 0920-4105

ic engine bearings

IEEE802.15.4

image processing

Imaging systems

implants

Thompson, Martin, Hunt, Ben, Smith, Alan M. and Joyce, Thomas (2015) Wear Tests of a Potential Biolubricant for Orthopedic Biopolymers. Lubricants, 3 (2). pp. 80-90. ISSN 2075-4442

In-Cylinder Pressure

In-Cylinder Temperature

inclined surfaces

independently rotating wheels

Induced voltage

induction motor

Shaeboub, Abdulkarim, Gu, Fengshou, Lane, Mark, Haba, Usama, Wu, Zhifei and Ball, Andrew (2017) Modulation signal bispectrum analysis of electric signals for the detection and diagnosis of compound faults in induction motors with sensorless drives. Systems Science & Control Engineering, 5 (1). pp. 252-267. ISSN 2164-2583

induction motors

Injector Fault

Instantaneous Angular Speed (IAS)

Instrumentation

Intelligent machine condition monitoring (CM)

Tang, Xiaoli (2020) Investigation of Data Compression Methods for Intelligent Machine Condition Monitoring. Doctoral thesis, University of Huddersfield.

intelligent manufacturing

intelligent sensing

Inter-leaved inverter

Interatomic Potentials

interference

interval order

Inverse design

Kollar, László E., Mishra, Rakesh and Jain, Anuj (2016) Inverse Design of Blade Shapes for Vertical Axis Wind Turbines. In: 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power December 15-17, 2016,, 15-17 December 2016, MNNIT Allahaabd, India.

inverters

IO coupler

Ion implantation damage

IR slotted photomicro-sensors (SPMs)

Irradiation damage

Isothermal flat plate

KelvinHelmholtz wave

key parameter

Arief, Ikhwan and Chen, Xun (2010) Key Parameters In Loose Abrasive Machining. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 1-5. ISBN 9781862180932

kinetic Energy

Knowledge management

knowledge structure

Kurtogram

Kurtosis

LabVIEW

Potdar, Akshay, Longstaff, Andrew P., Fletcher, Simon and Abdulshahed, Ali (2013) Development of modular machine tool structural monitoring system. In: Proceedings of the International Conference on Advanced Manufacturing Engineering and Technologies. KTH Royal Institute of Technology, Stockholm, pp. 263-272. ISBN 978-91-7501-892-8

Laser scanning

laser velocimetry

lateral displacement

Pislaru, Crinela and Anyakwo, Arthur (2014) On Quasi-Newton Method Applied To 2D Wheel-Rail Contact Models. International Journal of Engineering Research & Technology, 3 (3). pp. 1962-1971. ISSN 2278-0181

Lattice Boltzmann

Lean manufacturing

Least-cost principle

lens

LES

Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.

life-cycle costs

Andrade, António Ramos and Stow, Julian (2017) Assessing the potential cost savings of introducing the maintenance option of ‘Economic Tyre Turning’ in Great Britain railway wheelsets. Reliability Engineering & System Safety, 168. pp. 317-325. ISSN 0951-8320

Lifting wavelet

light absorption method

light rail

Linear Mixed Models

Andrade, António Ramos and Stow, Julian (2017) Assessing the efficiency of maintenance operators: a case study of turning railway wheelsets on an under-floor wheel lathe. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 231 (2). pp. 155-163. ISSN 1748-006X

Local processing

Longitudinal weld profile

Loose abrasive machining

Loss reduction

Lower Order of Cognitive Skills(LOCS)

Lubrication

machine dynamic behaviour

Machine performance

Longstaff, Andrew P. (2002) Methods of evaluation of the positioning capability of Cartesian and non-Cartesian machines. Doctoral thesis, University of Huddersfield.

machine tool

Pislaru, Crinela (2013) A Review on Real-Time Simulation of CNC Machine Tool Dynamics. International Journal of Mechanical Engineering, 2 (5). pp. 39-44. ISSN 2319-2240

Machine tool calibration

Machine tool errors

machine tool model

machine tool modeling

machine tool performance

Machine Tool Spindle

Clough, David A, Fletcher, Simon and Longstaff, Andrew P. (2010) Non-contact measurement and analysis of machine tool spindles. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 189. ISBN 9781862180932

Machine tool structural monitoring system

Machine vision

Machinery

Longstaff, Andrew P. (2002) Methods of evaluation of the positioning capability of Cartesian and non-Cartesian machines. Doctoral thesis, University of Huddersfield.

Postlethwaite, Scott R. (1992) Electronic based accuracy enhancement of CNC machine tools. Doctoral thesis, Huddersfield Polytechnic.

Machinery & tools

Pislaru, Crinela (2001) Parameter identification and hybrid mathematical modelling techniques applied to non-linear control systems. Doctoral thesis, University of Huddersfield.

Machinery Automatic control

Pislaru, Crinela (2001) Parameter identification and hybrid mathematical modelling techniques applied to non-linear control systems. Doctoral thesis, University of Huddersfield.

Machinery Testing

Fish, Michael Anderson (1998) Transmission errors in precision worm gear drives. Doctoral thesis, University of Huddersfield.

Machinery Tools

Fish, Michael Anderson (1998) Transmission errors in precision worm gear drives. Doctoral thesis, University of Huddersfield.

Longstaff, Andrew P. (2002) Methods of evaluation of the positioning capability of Cartesian and non-Cartesian machines. Doctoral thesis, University of Huddersfield.

Pislaru, Crinela (2001) Parameter identification and hybrid mathematical modelling techniques applied to non-linear control systems. Doctoral thesis, University of Huddersfield.

Postlethwaite, Scott R. (1992) Electronic based accuracy enhancement of CNC machine tools. Doctoral thesis, Huddersfield Polytechnic.

Magnetic flux density

maintenance

manufacturing

Marman clamp

Barrans, Simon, Khodabakhshi, G. and Xu, Qiang (2014) Contact Pressure Distribution in Joints Formed by V-Band Clamps. Advanced Materials Research, 1016. pp. 34-38. ISSN 1662-8985

Mathematics

Postlethwaite, Scott R. (1992) Electronic based accuracy enhancement of CNC machine tools. Doctoral thesis, Huddersfield Polytechnic.

measurement

Ibrahim, S M, Bills, Paul J. and Allport, John (2017) Improving the Capacity of Institutions to strengthen the Management of National Oil and Gas Resources. In: 224th International Academic Conference on Engineering, Technology and Innovations (IACETI), 23-24 August 2017, Mecca, Saudi Arabia.

measurement uncertainty

mechanical contact

Mechanical seals

Mechanical shutter

mechanical stability

mechatronic

Pislaru, Crinela (2013) A Review on Real-Time Simulation of CNC Machine Tool Dynamics. International Journal of Mechanical Engineering, 2 (5). pp. 39-44. ISSN 2319-2240

mechatronic bogie

mechatronics

MEMS structure

Meso-scale

metrology

Wang, Jian (2012) Sampling for the Measurement of Structured Surfaces. Doctoral thesis, University of Huddersfield.

Metrology and measurement

Micro finishing

micro-channels

Micromachining

Micrometer range

microphone array

Zhen, Dong, Gu, Fengshou and Ball, Andrew (2010) The Study of Acoustic Source Localization using a Small Microphone Array for Condition Monitoring. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 14-19. ISBN 9781862180932

Minimum Depth of Cut

Oluwajobi, Akinjide O. and Chen, Xun (2010) On Minimum Depth of Cut in nanomachining. In: Advances in manufacturing technology. Durham University and Glasgow Caledonian University, Durham, pp. 174-179. ISBN 9781905866519

Minimum entropy deconvolution (MED)

Minimum zone

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

mirror

Misalignment

missing data

Mixing

Modal decomposition

Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.

Model Based Fault Detection Method

model-based approach

model-based condition monitoring

modeling

Modelling

Pislaru, Crinela (2012) Modelling and Simulation of the Dynamic Behaviour of Wheel-Rail Interface. In: IET Event: The Railway Wheel-Rail Interface: Damage Mechanisms and Potential Solutions, 5 March 2012, University of Huddersfield.

modelling and simulation

Modular structure

Modulation signal bispectrum

Molecular Dynamics

MOM

Momentum injection

Monte Carlo simulation

montonic effects

MOPSO

Radhi, H.E. and Barrans, Simon (2011) Comparison between Multiobjective Population-Based Algorithms in Mechanical Problem. Applied Mechanics and Materials, 110-16. pp. 2383-2389. ISSN 1662-7482

morphological filter

morphological filters

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) Correlating motif analysis and morphological filters for surface texture analysis. Measurement, 46 (2). pp. 993-1001. ISSN 0263-2241

Morphological furrows

Wojciechowski, L., Kubiak, Krzysztof and Mathia, T.G. (2017) Impact of morphological furrows as lubricant reservoir on creation of oleophilic and oleophobic behaviour of metallic surfaces in scuffing. Tribology International, 116. pp. 320-328. ISSN 0301-679X

morphological method

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2013) Identifying and Characterizing Micro-machining Signatures on Freeform Surfaces Using Morphological Methods. In: Manufacturing the future conference 2013, 17-18 September 2013, Cranfield University, UK. (Unpublished)

morphological operation

MOSA

Radhi, H.E. and Barrans, Simon (2011) Comparison between Multiobjective Population-Based Algorithms in Mechanical Problem. Applied Mechanics and Materials, 110-16. pp. 2383-2389. ISSN 1662-7482

Motif analysis

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) Correlating motif analysis and morphological filters for surface texture analysis. Measurement, 46 (2). pp. 993-1001. ISSN 0263-2241

motion control

Pislaru, Crinela (2013) A Review on Real-Time Simulation of CNC Machine Tool Dynamics. International Journal of Mechanical Engineering, 2 (5). pp. 39-44. ISSN 2319-2240

Motivated learning

motor current and voltage signatures analysis

Motor current signal analysis

Motor Current Signature Analysis

motor current signatures analysis

Multi-Carrier Code Division Multiple Access

Multi-Carrier Direct Sequence Code Division Multiple Access

multi-hole pressure probe

Multi-objective optimization

Radhi, H.E. and Barrans, Simon (2011) Comparison between Multiobjective Population-Based Algorithms in Mechanical Problem. Applied Mechanics and Materials, 110-16. pp. 2383-2389. ISSN 1662-7482

Multi-sensor

Multi-sensor data acquisition system

Multi-stage

multibody dynamics

multibody model

multibody modelling

Multipath ultrasonic flow-meter

multiple scattering effect

Gao, F., Coupland, J. M. and Petzing, J. (2006) V-groove measurement with white light interferometry. In: Photon06, 4-7 September, 2006, Manchester.

MUSIC Algorithm

Musical acoustics

Ngu, Jude T.A. (1995) The effects of turbulence on organ sound quality and its minimisation in blowing systems. Doctoral thesis, University of Huddersfield.

N)

Nanomachining

Nanometer removal

Nanometer-scale resolution

Neural Networks

Nigeria

Non-Contact Measurement

Non-overlap subaperture stitching

Wu, Xin, Yu, Yingjie, Zeng, Wenhan, Qi, Te, Chen, Mingyi and Jiang, Xiangqian (2017) Non-overlap subaperture interferometric testing for large optics. Optics Communications, 396. pp. 191-198. ISSN 0030-4018

non-uniform deposits

normal forces

novel suspension

NOx emission

Numerical method

numerical simulation

Nusselt number

Oil and gas

Oleophilicity

Oleophobicity

On-line Surface Inspection

online condition monitoring

Liu, Fulong, Gu, Fengshou, Zhao, Yunshi and Ball, Andrew (2016) A validation study of ACS-SSI for online condition monitoring of vehicle suspension systems. Vibroengineering Procedia, 10. pp. 369-375. ISSN 2345-0533

optics

optics manufacturing telescope robot automation

Walker, David D. (2016) CNC Polishing and Metrology – from E-ELT Segments to Commercial Optics. In: Academic seminar by Prof David Walker: The Institute of Optics And Electronics, The chinese Academy of Sciences:, 6-8 June 2016, Chengdu, China. (Unpublished)

Optimisation

Optoelectronics Robotics Vehicles

Lockwood, Stephen (1992) Design of an obstacle avoidance system for automated guided vehicles. Doctoral thesis, University of Huddersfield.

orthogonal cutting

Orthogonal Frequency Division Multiplexing

Pad abutment

Parametric surface

Pagani, Luca, Qi, Qunfen, Jiang, Xiangqian and Scott, Paul J. (2017) Towards a new definition of areal surface texture parameters on freeform surface. Measurement, 109. pp. 281-291. ISSN 0263-2241

Pareto

Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X

part classification

Barrans, Simon, Eyre, Gareth and Goddard, Michael (2015) Bespoke Part Library for an SME for Enhanced Design Efficiency. Applied Mechanics and Materials, 798. pp. 500-504. ISSN 1662-7482

Part library

Barrans, Simon, Eyre, Gareth and Goddard, Michael (2015) Bespoke Part Library for an SME for Enhanced Design Efficiency. Applied Mechanics and Materials, 798. pp. 500-504. ISSN 1662-7482

Pattern analysis

PDE filter

Performance

Performance modelling

phase measurement

Pin-on-disc Test

piston slap

ploughing

POD

Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.

Polynomial fitting

Ported shroud

power regeneration

Wang, Ruichen, Crosbee, David, Iwnicki, Simon, Zhao, Yunshi and Bevan, Adam (2017) Power regeneration in the primary suspension of a railway vehicle. In: First International Conference on Rail Transportation, 10-12th July 2017, Chengdu, China. (Unpublished)

Power savings

precision machining

predictive analysis techniques

primary damper

Probabilistic Neural Network

Profilometry

Walton, Karl, Blunt, Liam, Fleming, Leigh, Goodhand, Martin and Lung, Hang (2014) A real parametric characterisation of ex-service compressor blade leading edges. Wear, 321. pp. 79-86. ISSN 00431648

Push-pull alternator

Quadric surfaces

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

Radial basis function

Rail fatigue

rail vehicle

rail vehicle dynamic simulations

rail vehicle dynamics

rails

railway applications

railway dynamics

railway engineering

Railway maintenance

railway vehicle

railway vehicle dynamics

railway wheelsets

railways

Raman spectroscopy

RANS

real time

real-time systems

rear wing

Jackson, Frankie. F (2018) Aerodynamic optimisation of Formula student vehicle using computational fluid dynamics. Fields: journal of Huddersfield student research, 4 (1). ISSN 2057-0163

Reciprocating Compressor

Reference wave

reflection and transmission characteristics

resurfacing

Retrieval Analysis

Reverse engineering

Ride comfort

Hamed, M., Tesfa, Belachew, Fengshou, Gu and Ball, Andrew (2014) A study of the Suspension System for the Diagnosis of Dynamic Characteristics. In: Proceedings of the 20th International Conference on Automation and Computing (ICAC), 2014. ICAC (2014). IEEE, Cranfield, UK.

Road handling

robot

robust adaptive observer

robust filtration

rollers (machinery)

Roughness

roughness metrology

Roundness measurement

rubbing

running safety

sampling

Wang, Jian (2012) Sampling for the Measurement of Structured Surfaces. Doctoral thesis, University of Huddersfield.

SBES

Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.

Scuffing

segmentation

Segmented inverter

Self aligning journal bearing

Self aligning spherical journal bearing

Self-adaptive differential evolution

Zhang, Xiangchao, Jiang, Xiang and Scott, Paul J. (2011) Minimum Zone Evaluation of the Form Errors of Quadric Surfaces. Precision Engineering, 35 (2). pp. 383-389. ISSN 0141-6359

Self-correction arrangement

Sendzimir cold rolling

Deltombe, R., Kubiak, Krzysztof and Bigerelle, M. (2014) How to select the most relevant 3D roughness parameters of a surface. Scanning, 36 (1). pp. 150-160. ISSN 0161-0457

sensorless control

Sensorless Variable Speed Drive

Sensorless VSD

Severe service

Shaft Misalignment

Shape factor

short-time Fourier transform

Short-time RMS

sideband estimator

signal processing

simulation

Pislaru, Crinela (2013) A Review on Real-Time Simulation of CNC Machine Tool Dynamics. International Journal of Mechanical Engineering, 2 (5). pp. 39-44. ISSN 2319-2240

Size Mismatch

SMD

softgauges

Li, Tukun (2012) Software Measurement Standards in Surface Metrology: Basics, Concepts, Methods. LAP LAMBERT Academic Publishing, Saarbrücken, Germany. ISBN 978-3659278358

Software measurement standards

Li, Tukun (2012) Software Measurement Standards in Surface Metrology: Basics, Concepts, Methods. LAP LAMBERT Academic Publishing, Saarbrücken, Germany. ISBN 978-3659278358

software-in-the-loop

Solid particle erosion

Solid-liquid flow

sound localization

Spectral correlation

spectrum analysis

speed bump geometry

Spindle Error

Spiral bevel gear

SPM

Spragging

Square Zernike polynomial

Squeeze film effect

standardisation

Barrans, Simon, Eyre, Gareth and Goddard, Michael (2015) Bespoke Part Library for an SME for Enhanced Design Efficiency. Applied Mechanics and Materials, 798. pp. 500-504. ISSN 1662-7482

statistical analysis

Deltombe, R., Kubiak, Krzysztof and Bigerelle, M. (2014) How to select the most relevant 3D roughness parameters of a surface. Scanning, 36 (1). pp. 150-160. ISSN 0161-0457

stator asymmetries faults

stator winding asymmetry and broken rotor bar

Stochastic Frontier Analysis

stochastic subspace identification

strain gauges

stress distribution

Structured surface

structured surfaces

Wang, Jian (2012) Sampling for the Measurement of Structured Surfaces. Doctoral thesis, University of Huddersfield.

Subaperture distribution pattern

Support Vector Machine

surface

Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X

Surface Analysis

surface finishing

surface metrology

Blunt, Liam, Jiang, Xiang, Zeng, Wenhan and Asim, Taimoor (2009) A new way to evaluate steel sheet surfaces. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia. (Unpublished)

Li, Tukun (2012) Software Measurement Standards in Surface Metrology: Basics, Concepts, Methods. LAP LAMBERT Academic Publishing, Saarbrücken, Germany. ISBN 978-3659278358

Surface morphology

Kubiak, Krzysztof and Mathia, T.G. (2009) Influence of roughness on contact interface in fretting under dry and boundary lubricated sliding regimes. Wear, 267 (1-4). 315 - 321. ISSN 0043-1648

Surface reconstruction

Pagani, Luca, Qi, Qunfen, Jiang, Xiangqian and Scott, Paul J. (2017) Towards a new definition of areal surface texture parameters on freeform surface. Measurement, 109. pp. 281-291. ISSN 0263-2241

surface roughness

Deltombe, R., Kubiak, Krzysztof and Bigerelle, M. (2014) How to select the most relevant 3D roughness parameters of a surface. Scanning, 36 (1). pp. 150-160. ISSN 0161-0457

surface roughness measurement

Gao, F., Coupland, J. M. and Petzing, J. (2006) V-groove measurement with white light interferometry. In: Photon06, 4-7 September, 2006, Manchester.

surface texture

surface texture analysis

Lou, Shan, Jiang, Xiangqian and Scott, Paul J. (2013) Correlating motif analysis and morphological filters for surface texture analysis. Measurement, 46 (2). pp. 993-1001. ISSN 0263-2241

surface topography

Surface vibration

Surface-mounted

suspension modeling

suspension modelling

Sustainable design

Sustainable Engineering

Sustainable life value

Sustainable manufacturing

Synovial Fluid

Thompson, Martin, Hunt, Ben, Smith, Alan M. and Joyce, Thomas (2015) Wear Tests of a Potential Biolubricant for Orthopedic Biopolymers. Lubricants, 3 (2). pp. 80-90. ISSN 2075-4442

system

systematic effects

Talysurf

Technical Efficiency

Testing Laboratories

Fish, Michael Anderson (1998) Transmission errors in precision worm gear drives. Doctoral thesis, University of Huddersfield.

Texturation

Texturing

thermal efficiency

Thermal-elastic coupled method

Thermoacoustics

three-body abrasion

time delay estimation

time synchronous averaging

Timedomain and Frequency-domain features

tool geometry

Tooth scuffing

topographical features

Topography

Torsional fretting

torsional load capacity

Sahboun, Salahaddin and Barrans, Simon (2015) Simulating Torsional Slip in V-band Clamp Joints. Applied Mechanics and Materials, 798. pp. 53-58. ISSN 1662-7482

Torsional sliding

traceability

Li, Tukun (2012) Software Measurement Standards in Surface Metrology: Basics, Concepts, Methods. LAP LAMBERT Academic Publishing, Saarbrücken, Germany. ISBN 978-3659278358

track-based sensors

traction systems

tractor-trailer

traditional engineering

Training

Transient Performance

Transient thermal analysis

Transit-time method

Travelling-wave

tribology

turbocharger

two-body abrasion

Two-phase flow measurement

Ultra-precision

uncertainty

Li, Tukun (2012) Software Measurement Standards in Surface Metrology: Basics, Concepts, Methods. LAP LAMBERT Academic Publishing, Saarbrücken, Germany. ISBN 978-3659278358

uniform sampling

Wang, Jian (2012) Sampling for the Measurement of Structured Surfaces. Doctoral thesis, University of Huddersfield.

United States

URANS

V-band clamp

Sahboun, Salahaddin and Barrans, Simon (2015) Simulating Torsional Slip in V-band Clamp Joints. Applied Mechanics and Materials, 798. pp. 53-58. ISSN 1662-7482

V-groove measurement

Gao, F., Coupland, J. M. and Petzing, J. (2006) V-groove measurement with white light interferometry. In: Photon06, 4-7 September, 2006, Manchester.

V-section band clamp

Barrans, Simon, Khodabakhshi, G. and Xu, Qiang (2014) Contact Pressure Distribution in Joints Formed by V-Band Clamps. Advanced Materials Research, 1016. pp. 34-38. ISSN 1662-8985

validation

variable speed drive (VSD)

Vehicle aerodynamics

Jackson, Frankie. F (2018) Aerodynamic optimisation of Formula student vehicle using computational fluid dynamics. Fields: journal of Huddersfield student research, 4 (1). ISSN 2057-0163

vehicle dynamics

vehicle speed

vehicle stability

vehicle suspension

vehicle tyres inflation

vehicle-based sensors

Vehicle/track interaction

velocity components

Velocity distribution

Vertical axis wind turbine

Vibration

Vibration analysis

Vibration measurement

vibration signal

Vibro-Acoustic

vibro-acoustic analysis

vibro-acoustic monitoring

Viscosity

volume loss

Waste heat recovery

water

water injection

waviness

Wear

wear debris

Wear mechanism

Wear models

wear prediction

wear scar

wear test

Thompson, Martin, Hunt, Ben, Smith, Alan M. and Joyce, Thomas (2015) Wear Tests of a Potential Biolubricant for Orthopedic Biopolymers. Lubricants, 3 (2). pp. 80-90. ISSN 2075-4442

Weight value

wettability

Wetting

Kubiak, Krzysztof, Wilson, M.C.T., Mathia, T.G. and Carval, Ph. (2011) Wettability versus roughness of engineering surfaces. Wear, 271 (3-4). 523 - 528. ISSN 0043-1648

wheel profiles

wheel arch

wheel-rail contact

wheel-rail contact model

wheel-rail interaction

wheel-rail interface

Wheel/rail contact forces

wheelmotors

wheels

wheelsets

white light channeled spectrum interferometry

White light interferometry

Gao, F., Coupland, J. M. and Petzing, J. (2006) V-groove measurement with white light interferometry. In: Photon06, 4-7 September, 2006, Manchester.

Wireless Sensor

Wireless sensor network (WSN)

Tang, Xiaoli (2020) Investigation of Data Compression Methods for Intelligent Machine Condition Monitoring. Doctoral thesis, University of Huddersfield.