Items where School is "Engineering Control and Machine Performance Research Group"

Abdulshahed, Ali, Longstaff, Andrew P and Fletcher, Simon (2014) A novel approach for ANFIS modelling based on Grey system theory for thermal error compensation. In: 14th UK Workshop on Computational Intelligence. UKCI (2014). IEEE, Bradford, :UK. ISBN 978-1-4799-5538-1

Abdulshahed, Ali, Longstaff, Andrew P. and Fletcher, Simon (2015) The application of ANFIS prediction models for thermal error compensation on CNC machine tools. Applied Soft Computing, 27. pp. 158-168. ISSN 1568-4946

Abdulshahed, Ali, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Application of GNNMCI(1, N) to environmental thermal error modelling of CNC machine tools. In: The 3rd International Conference on Advanced Manufacturing Engineering and Technologies. KTH Royal Institute of Technology, Stockholm, Sweden, pp. 253-262. ISBN 9789175018928

Abdulshahed, Ali, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Comparative study of ANN and ANFIS prediction models for thermal error compensation on CNC machine tools. In: Laser Metrology and Machine Performance X. LAMDAMAP 2013 . EUSPEN, Buckinghamshire, UK, pp. 79-89. ISBN 978-0-9566790-1-7

Abdulshahed, Ali, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2015) Thermal error modelling of machine tools based on ANFIS with fuzzy c-means clustering using a thermal imaging camera. Applied Mathematical Modelling, 39 (7). pp. 1837-1852. ISSN 0307-904X

Abdulshahed, Ali M., Longstaff, Andrew P., Fletcher, Simon and Potdar, Akshay (2016) Thermal error modelling of a gantry-type 5-axis machine tool using a Grey Neural Network Model. Journal of Manufacturing Systems, 41. pp. 130-142. ISSN 02786125

Abuaniza, Ayman, Fletcher, Simon and Longstaff, Andrew P. (2013) Thermal error modelling of a three axes vertical milling machine using Finite element analysis (FEA). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 87-92. ISBN 9781862181212

Akowua, Kwame D.B, Fletcher, Simon, Longstaff, Andrew P. and Mian, Naeem S. (2017) Areal surface measurement using multidirectional laser line scanning. In: Laser Metrology and Machine Performance XII, Lamdamap 2017. euspen, Renishaw Innovation Centre, Wotton-under-Edge, UK, pp. 175-182. ISBN 978-0956679093

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter and Myers, Alan (2008) A Low Cost Ultrasonic 3D Measurement Device for Calibration for Cartesian and Non-Cartesian Machines. In: Third International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics ISEM 2008, 7th - 10th December 2008, National Cheng Kung University, Tainan, Taiwan. (Unpublished)

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter and Myers, Alan (2007) A high accuracy ultrasound distance measurement system using binary frequency shift-keyed signal and phase detection. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter, Myers, Alan and Briggs, Jack (2009) A Low-cost Ultrasonic 3D Measurement Device for Calibration for Cartesian and Non-Cartesian Machines. Journal of the Japanese Society of Experimental Mechanics, 9 (S). pp. 77-80. ISSN 1346-4930

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter, Myers, Alan and Briggs, Jack (2008) A multifrequency FM-based ultrasonic system for accuracy 3D measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 9-14. ISBN 978-1-86218-067-3

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Pislaru, Crinela, Myers, Alan and Briggs, Jack (2009) A high accuracy ultrasonic system for measurement of air temperature. In: Proceedings of the 9th International Conference - San Sebastian, Spain, 2009. EUSPEN, pp. 134-137. ISBN 978-0-9553082-6-0

Alseddiqi, Mohamed, Mishra, Rakesh and Pislaru, Crinela (2010) Design and Development of an On-Line Work-Based Learning (WBL) Module to Enhance the Technical and Vocational Education (TVE) System in Bahrain. In: Global Learn Asia Pacific 2010: Global Conference on Learning and Technology. Association for the Advancement of Computing in Education (AACE), Vancouver, Canada, p. 1168. ISBN 1-880094-79-7

Alseddiqi, Mohamed, Mishra, Rakesh and Pislaru, Crinela (2009) Identification of skills gap between school-based learning and work-based learning in technical and vocational education in Bahrain. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, UK, pp. 118-123. ISBN 9781862180857

Alzarok, Hamza, Fletcher, Simon and Longstaff, Andrew P. (2016) A new strategy for improving vision based tracking accuracy based on utilization of camera calibration information. In: The 22nd IEEE International Conference on Automation & Computing. ICAC (2016). IEEE, University of Essex, Colchester, UK, pp. 290-295. ISBN 978-1-8621813-1-1

Alzarok, Hamza, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) Assessment of the positioning accuracy of a small articulated robot during machining operations. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 106-111. ISBN 9781862181212

Anyakwo, Arthur, Pislaru, Crinela and Ball, Andrew (2012) A New Method for Modelling and Simulation of the Dynamic Behaviour of the Wheel-rail contact. International Journal of Automation and Computing, 9 (3). ISSN 1476-8186

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Dynamic simulation of a roller rig. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 51-56. ISBN 978-1-86218-106-9

Ashari, Djoni, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Artificial intelligence-based condition monitoring for practical electrical drives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 143. ISBN 978-1-86218-106-9

Barrans, Simon and Bhat, N. (2003) Design of flat bed aerostatic bearings with the aid of finite element analysis. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 361-370. ISBN 9781853129902

Barrans, Simon and Bhat, N. (2005) Optimization of Flat PAD Bearings with the aid of Finite Element Analysis. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Barrans, Simon, Ghurbal, E.M. and Freeman, R. (2003) Design optimization of the head of a high precision polishing machine. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 325-334. ISBN 9781853129902

Barrans, Simon and Muller, Matthias (2009) Finite element prediction of the ultimate axial load capacity of V-section band clamps. Journal of Physics: conference series, 181. pp. 1-8. ISSN 1742-6596

Barrans, Simon and Weston, R.H (2006) Technical Application Series - A strain data aquisition system suitable for remote applications. Experimental Techniques, 28 (3). pp. 68-71. ISSN 0732-8818

Bhat, N, Barrans, S M, Narasimhan, R, Kumar, A S and Low, T C (2010) Static and dynamic analyisis of inherently compensated aerostatic flat pad bearings. In: ASME 2010 International Mechanical Engineering Congress & Exposition, 12 - 18 November 2010, Vancouver, British Columbia, Canada.

Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X

Blunt, Liam, Zhang, H., Barrans, Simon and Brown, L. (2008) The Relative Contribution of Micropores and Shrinkage Bumps on Cement Surface to Fretting Wear on polished Stems. In: 35th Leeds-Lyon Symposium on Tribology, 9th-12th September 2008, Leeds. (Submitted)

Blunt, Liam, Zhang, Hongyu, Barrans, Simon, Jiang, Xiang and Brown, Leigh (2008) What results in fretting wear on polished femoral stems. Tribology International, 42 (11). pp. 1605-1614. ISSN 0301-679X

Borisov, Oleg, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2010) Efficient Machine Error Measurement. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932

Borisov, Oleg, Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2014) Performance evaluation of a new taut wire system for straightness measurement of machine tools. Precision Engineering, 38 (3). pp. 492-498. ISSN 0141-6359

Brown, Leigh, Zhang, H., Blunt, Liam and Barrans, Simon (2007) Reproduction of fretting wear at the stem—cement interface in total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 221 (8). pp. 963-971. ISSN 0954-4119

Carra, F, Bertarelli, A, Berthome, E, Fichera, C, Furness, Thomas, Guinchard, M, Mettler, L K, Portelli, M, Redaelli, S and Sacristan De Frutos, O (2017) The "Multimat" experiment at CERN HiRadMat facility: advanced testing of novel materials and instrumentation for HL-LHC collimators. Journal of Physics: Conference Series, 874. ISSN 1742-6596

Chen, Xiaomei and Koenders, Ludger (2014) A novel pitch evaluation of one-dimensional gratings based on a cross-correlation filter. Measurement Science and Technology, 25 (4). 044007. ISSN 0957-0233

Chen, Xiaomei, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Evaluation of measurement technique for a precision aspheric artefact using a nano-measuring machine. In: Laser Metrology and Machine Performance X. Euspen, Euspen Headquarters, Bedfordshire, MK43 0AL, UK, pp. 357-364. ISBN 978-0-9566790-1-7

Chen, Xiaomei, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2014) Analysing and evaluating a dual-sensor autofocusing method for measuring the position of patterns of small holes on complex curved surfaces. Sensors and Actuators A: Physical, 210. pp. 86-94. ISSN 0924-4247

Chen, Xiaomei, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2014) Deployment and evaluation of a dual-sensor autofocusing method for on-machine measurement of patterns of small holes on freeform surfaces. Applied Optics, 53 (10). pp. 2246-2255. ISSN 1559-128X

Chen, Xiaomei, Longstaff, Andrew P., Parkinson, Simon and Myers, Alan (2014) A Method for Rapid Detection and Evaluation of Position Errors of Patterns of Small Holes on Complex Curved and Freeform Surfaces. International Journal of Precision Engineering and Manufacturing, 15 (2). pp. 209-217. ISSN 2234-7593

Clough, David A, Fletcher, Simon and Longstaff, Andrew P. (2010) Non-contact measurement and analysis of machine tool spindles. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 189. ISBN 9781862180932

Clough, David A, Fletcher, Simon, Longstaff, Andrew P. and Willoughby, Peter (2012) Practical in-situ calibration method for the non-linear output from a low cost eddy current sensor. In: 37th International Matador Conference, 25th - 27th July 2012, Manchester, England.

Cunningham, J., Xu, Qiang and Ford, Derek G. (2002) A case study on practical error correction practices utilised on a CNC machine tool. In: Advances in Manufacturing Technology XVI. Wiley, pp. 361-366. ISBN 9781860583780

Feng, Li, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2011) Integrated tactile-optical coordinate measuring system. In: University of Huddersfield Annual Research Festival School of Computing and Engineering, March 2011, University of Huddersfield. (Submitted)

Fletcher, Simon and Ford, Derek G. (2003) Measuring and modelling heat transfer and thermal errors on a ballscrew feed drive system. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 349-360. ISBN 9781853129902

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2005) Compensation of thermal errors on a small vertical milling machine. In: Proceedings of the 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. European Society for Precision Engineering and Nanotechnology, pp. 432-441. ISBN 1861941188

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2009) Defining and Computing Machine Tool Accuracy. In: Laser Metrology and Machine Performance. Euspen Ltd, Euspen Headquarters, Cranfield University, pp. 77-86. ISBN 978-0-9553082-7-7

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2005) Flexible modelling and compensation of machine tool thermal errors. In: 20th Annual Meeting of American Society for Precision Engineering, 9th -14th October 2005, Norfolk, VA.

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2005) Investigation into the accuracy of a proposed laser diode based multilateration machine tool calibration system. Journal Paper of Physics: Conference Series, 13. pp. 398-401. ISSN 1742-6588

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2007) Measurement methods for efficient thermal assessment and error compensation. In: EUSPEN Topical Meeting "Thermal Effects in Precision Engineering", 3 - 4 December 2007, Maastricht, The Netherlands.

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2005) Practical compensation of all significant thermal errors in machine tools. In: 3rd International Congress on Precision Machining, Vienna, Austria, October 2005, Vienna, Austria.

Fletcher, Simon, Mian, N S and Longstaff, Andrew P. (2014) Optimising temperature sensor placement for machine tool thermal error compensation. In: EUSPEN Special Interest Group: Thermal Issues, 19-20 March 2014, Novotel Zurich City, Zurich, Switzerland. (Unpublished)

Fletcher, Simon, Postlethwaite, S. R. and Ford, Derek G. (2001) Volumetric compensation through the machine controller. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 321-330. ISBN 9781853128905

Forbes, Alistair B., Papananias, Moschos, Longstaff, Andrew P., Fletcher, Simon, Mengot, Azibananye and Jonas, Kevyn (2016) Developments in automated flexible gauging and the uncertainty associated with comparative coordinate measurement. In: euspen's 16th International Conference & Exhibition, 30 May - 3 June, Nottingham, UK. european society for precision engineering and nanotechnology, pp. 111-112. ISBN 978-0-9566790-8-6

Ford, Derek G. (2003) Machine tool performance: past and present research contributions from the Centre for Precision Technologies. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 403-419. ISBN 9781853129902

Ford, Derek G. (2004) Precision versus volumetric cutting. In: Nonlinear Dynamics and Chaos for High Volume and Ultra Precsion Metal Cutting, 20 - 24 September 2004, International Centre for Mechanical Sciences, Udine, Italy. (Unpublished)

Ford, Derek G., Castaneda, Veimar Yobany Moreno, Longstaff, Andrew P., Pislaru, Crinela and Myers, Alan (2014) Computer numerical control vertical machining centre feed drive modelling using the transmission line technique. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science. pp. 1-22. ISSN 09544062

Ford, Derek G., Longstaff, Andrew P., Freeman, J.M. and Postlethwaite, S. R. (1999) Practical calibration of tracking laser systems. In: 4th International Conference on Laser Metroogy and Machine Performance, 13 to 15 July 1999, Longhirst Hall, Northumberland.

Ford, Derek G., Myers, Alan, Haase, Frerk, Lockwood, Stephen and Longstaff, Andrew P. (2013) Active Vibration Control for a CNC Milling Machine. Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science. ISSN 0954-4062

Ford, Derek G., Pislaru, Crinela and Freeman, J.M. (2001) Improving CNC machine tools performance by using modular approach. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 301-312. ISBN 9781853128905

Ford, Derek G., Widiyarto, Muhammad Helmi Nur, Myers, Alan, Longstaff, Andrew P. and Fletcher, Simon (2014) Structural analysis and chracterisation technique applied to a CNC vertical machining centre. Journal of Mechanical Engineering Science. ISSN 0954-4062

Freeman, J.M. and Ford, Derek G. (2003) Automated error analysis of serial manipulators and servo heads. Proceedings of the Institute of Mechanical Engineering Part C, 217 (9). pp. 1077-1084. ISSN 0954-4062

Freeman, J.M. and Ford, Derek G. (2005) The digital injection of signals into machine feedback loops via incremental encoder interfaces. Proceedings of the Institute of Mechanical Engineering Science Part C, 219 (3). pp. 325-329. ISSN 0954-4062

Freeman, J.M. and Ford, Derek G. (2001) The reconstruction of cyclically perturbed signals from aliased data. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 313-320. ISBN 9781853128905

Freeman, J.M., Longstaff, Andrew P. and Ford, Derek G. (2003) A general data logger for the measurement of the dynamics and the parameter estimation of machine tools. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 569-578. ISBN 9781853129902

Freeman, J.M., White, A.J. and Ford, Derek G. (2001) Ball-screw thermal errors - a finite element simulation for on-line estimation. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 269-278. ISBN 9781853128905

Haase, Frerk, Lockwood, S. and Ford, Derek G. (2003) Active vibration control of machine tool structures - Part 2: an experimental active-vibration control system. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 451-460. ISBN 9781853129902

Hasse, F., Lockwood, S. and Ford, Derek G. (2001) Vibration modelling of machine tool structures. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 137-146. ISBN 9781853128905

Hatwesh, Ashraf, Fletcher, Simon and Longstaff, Andrew P. (2013) Precise Position Control of Machine Tool Feed Drives in the Presence of Load Perturbation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 146-151. ISBN 9781862181212

Herapath, Colin, Barrans, S M and Weston, W (2011) A Comparison of Design Methodologies for Journal Bearings under Pulsatile Loads. In: International Conference on Renewable Energies and Power Quality (ICREPQ'11), 13-15 April 2011, Las Palmas de Gran Canaria, Spain.

Holroyd, Geoffrey, Fletcher, Simon and Myers, Alan (2005) Modelling the dynamic behaviour of a ballscrew system taking into account the changing position of the ballscrew nut. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2003) Determination of stiffness and damping sensitivity for computer numerically controlled machine tool drives. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217 (10). pp. 1165-1177. ISSN 0954-4062

Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2001) Identification of damping elements in CNC machine tool drive. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 289-299. ISBN 9781853128905

Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2003) Modelling the dynamic behaviour of a ball-screw system taking into account the changing position of the ball-screw nut. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 337-347. ISBN 9781853129902

Kenan, T. and Pislaru, Crinela (2012) Challenges related to e-learning implementation in higher education institutions in Libya. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 151. ISBN 978-1-86218-106-9

Kenan, T. and Pislaru, Crinela (2012) Challenges related to the implementation of e-learning in higher education institutions in Libya. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 116-122. ISBN 978-1-86218-106-9

Kenan, Thuraya, Pislaru, Crinela, Othman, Aisha and Elzawi, A. (2013) The social impact and cultural issues affecting the e-learning performance in Libyan Higher Education institutes. International Journal of Information Technology & Computer Science, 12 (1). pp. 50-56. ISSN 2091-1610

Kennedy, Allan and Ford, Derek G. (2003) From manual grinding to CNC Automation - a major step forward for the rod mill. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 579-588. ISBN 9781853129902

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2012) Integrated Tactile and Optical Measuring Systems in Three Dimensional Metrology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 1-6. ISBN 978-1-86218-106-9

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Integrated Tactile-Optical Coordinate System for the Reverse Engineering of Complex Geometry. In: Proceedings of the 37th International MATADOR Conference. Springer, pp. 41-44. ISBN 9781447144793

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2013) Multiple-sensor integration for efficient reverse engineering of geometry. Proceedings of the 11th International Conference on Manufacturing Research. pp. 319-324. ISSN 978-1-907413-23-0

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2011) A fast and effective way to improve the merging accuracy of multi-view point cloud data. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield, UK, pp. 18-21. ISBN 978-1-86218-098-7

Li, Guoxing, Wang, Tie, Zhang, Ruiliang, Gu, Fengshou and Shen, Jinxian (2015) An Improved Optimal Slip Ratio Prediction considering Tyre Inflation Pressure Changes. Journal of Control Science and Engineering, 2015. pp. 1-8. ISSN 1687-5249

Linares, J-M, Chaves-Jacob, J, Schwenke, H, Longstaff, Andrew P., Fletcher, Simon, Flore, J, Uhlmanne, E and Winteringe, J (2014) Impact of measurement procedure when error mapping and compensating a small CNC machine using a multilateration laser interferometer. Precision Engineering, 38 (3). pp. 578-588. ISSN 0141-6359

Liu, X, Cheng, K., Webb, D., Jiang, Xiang, Xiao, Shaojun, Longstaff, Andrew P., Widiyarto, H.M., Blunt, Liam and Ford, Derek G. (2003) Experimental investigation of the machined surface waviness, vibrations and cutting forces in peripheral milling. Key Engineering Materials, Advances in Abrasive Technology VI. pp. 213-218. ISSN 1013-9826

Liu, X-W, Cheng, K., Webb, D., Longstaff, Andrew P., Widiyarto, Muhammad Helmi Nur, Jiang, Xiang, Blunt, Liam and Ford, Derek G. (2003) Prediction and compensation of machining error in ball end milling for microscale curved surface. In: EUSPEN International Topical Conference, 19 - 20 May 2003, Aachen, Germany.

Liu, X., Cheung, K., Webb, D., Fiang, X.Q., Xiao, S.J., Longstaff, Andrew P., Widiyarto, H.M. and Jiang, Xiang (2004) Improved dynamic cutting force model in peripheral milling Part 2 Experimental verification and prediction. International Journal of Advanced Manufacturing Technology, 24. pp. 794-805. ISSN 0268-3768

Liu, X.-W., Cheng, K., Longstaff, Andrew P., Widiyarto, H.M. and Ford, Derek G. (2004) Improved dynamic cutting force model in ball-end milling. Part I: theoretical modelling and experimental calibration. International Journal of Advanced Manufacturing Technology, 26 (5-6). pp. 457-465. ISSN 0268-3768

Liu, X.W., Cheng, K., Webb, D., Longstaff, Andrew P., Widiyarto, Muhammad Helmi Nur, Jiang, Xiang, Blunt, Liam and Ford, Derek G. (2003) Investigation of the cutting force coefficients in ball-end milling. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 45-54. ISBN 9781853129902

Lobato, H, Fletcher, Simon, Myers, Alan, Orchard, N and Charlesworth, A (2009) Using a Kinematic Model of a Machine Tool to Predict Component Feature Capability. Laser Metrology and Machine Performance, IX . Euspen, Euspen Headquarters. ISBN 9780955308277

Lockwood, S., Haase, Frerk and Ford, Derek G. (2003) Active vibration control of machine tool structures - Part 1: DSP algorithms. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 441-450. ISBN 9781853129902

Longstaff, Andrew P. (2003) CNC machine tool volumetric accuracy performance. In: 6th International LAMDAMAP Conference, 15th - 18th July 2003, University of Huddersfield. (Unpublished)

Longstaff, Andrew P. (2002) Methods of evaluation of the positioning capability of Cartesian and non-Cartesian machines. Doctoral thesis, University of Huddersfield.

Longstaff, Andrew P. (2001) Volumetric Accuracy and Compensation. In: 5th International LAMDAMAP Conference, 17 - 20 July 2001, University of Birmingham. (Unpublished)

Longstaff, Andrew P. (2002) An introduction to machine tool testing. In: Dimensional Metrology Awareness Club, Gear Metrology Special Interest Group Meeting, June 2002, David Brown Textron Power Transmissions, Huddersfield. (Unpublished)

Longstaff, Andrew P., Fletcher, Simon and Ford, Derek G. (2004) Better accuracy speaks volumes: lost in space. Machinery. pp. 14-16.

Longstaff, Andrew P., Fletcher, Simon and Ford, Derek G. (2003) Practical experience of thermal testing with reference to ISO 230 Part 3. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 473-483. ISBN 9781853129902

Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2007) Flexible compensation of thermal errors. In: EUSPEN Topical Meeting "Thermal Effects in Precision Engineering", 3 - 4 December 2007, Maastricht, The Netherlands.

Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2005) Volumetric compensation for precision manufacture through a standard CNC controller. In: 20th Annual Meeting of the American Society for Precision Engineering, 9th-14th October 2005, Norfolk, VA.

Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2005) Volumetric compensation of machine tools makes geometric errors negligible. In: 3rd International Congress on Precision Machining, October 2005, Vienna, Austria.

Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2005) Volumetric error compensation through a Siemens controller. In: Proceedings of the 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. European Society for Precision Engineering and Nanotechnology, pp. 422-431. ISBN 1861941188

Longstaff, Andrew P., Fletcher, Simon, Parkinson, Simon and Myers, Alan (2014) The Role of Measurement and Modelling of Machine Tools in Improving Product Quality. International Journal of Metrology and Quality Engineering, 4 (03). pp. 177-184. ISSN 2107-6839

Longstaff, Andrew P., Fletcher, Simon, Poxton, Anthony and Myers, Alan (2009) Comparison of Volumetric Analysis Methods for Machine Tools with Rotary Axes. In: Laser Metrology and Machine Performance. Euspen Ltd, Euspen Headquarters, Cranfield University, pp. 87-96. ISBN 978-0-9553082-7-7

Longstaff, Andrew P., Postlethwaite, S. R. and Ford, Derek G. (2001) Assessment of the volumetric accuracy of a machine with geometric compensation. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 41-50. ISBN 9781853128905

Lui, X.W., Cheng, K., Longstaff, Andrew P., Widiyarto, Muhammad Helmi Nur and Ford, Derek G. (2005) Improved dynamic cutting force model in ball-end milling. Part 1: theoretical modelling and experimental calibration. International Journal of Advanced Manufacturing Technology, 26 (5). pp. 457-465. ISSN 0268-3768

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2011) Efficient thermal error prediction in a machine tool using finite element analysis. Measurement Science and Technology, 22 (8). 085107. ISSN 0957-0233

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2012) An efficient offline method for determining the thermally sensitive points of a machine tool structure. In: 37th International Matador Conference, 25th-27th July 2012, Manchester, England.

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2013) The significance of air pockets for modelling thermal errors of machine tools. In: Laser Metrology and Machine Performance X. Lamdamap 2013 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, 10 . EUSPEN, Bedfordshire, UK, pp. 189-198. ISBN 978-0-9566790-1-7

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2009) Efficient Offline Thermal Modelling for Accurate Assessment of Machine Tool Thermal Behaviour. In: Laser Metrology and Machine Performance. Euspen, Euspen Headquarters, Cranfield University, pp. 9-18. ISBN 978-0-9553082-7-7

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2009) Efficient offline thermal error modelling strategy for accurate thermal behaviour assessment of the machine tool. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 26-32. ISBN 9781862180857

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2009) Novel and Efficient Thermal Error Reduction Strategy For Machine Tool Performance Improvement. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2008) Novel and efficient thermal error reduction strategy for machine tool performance improvement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 15-22. ISBN 978-1-86218-067-3

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2010) Novel and efficient thermal error reduction strategy for machine tool performance improvement. In: University of Huddersfield Annual Research Festival School of Computing and Engineering 12th March 2010, Friday 12th March 2010, University of Huddersfield. (Unpublished)

Miller, Jonathan, Longstaff, Andrew P., Parkinson, Simon and Fletcher, Simon (2017) Improved Machine Tool Linear Axis Calibration Through Continuous Motion Data Capture. Precision Engineering, 47. pp. 249-260. ISSN 0141-6359

Mishra, Rakesh, Alseddiqi, Mohamed and Pislaru, Crinela (2009) An Improved Employability Skills Model and its Compliance Through Vocational Educational System in Bahrain. The International Journal of Learning, 16 (9). pp. 699-718. ISSN 1447-9494

Mishra, Rakesh, Alseddiqi, Mohamed and Pislaru, Crinela (2009) An improved employability skills model and its compliance through vocational educational system. In: Learning: the sixteenth international conference on Learning, 1-4 July 2009, University of Barcelona, Spain. (Unpublished)

Mishra, Rakesh, Barrans, Simon and Pislaru, Crinela (2009) Imparting psychomotor skills to the learners using computer aided instructions in Engineering Education. In: V International Conference on Multimedia and Information and Communication Technologies in Education, 22-24 April 2009, Lisbon, Portugal. (Unpublished)

Moreno-Castaneda, V.Y., Pislaru, Crinela and Ford, Derek G. (2005) Modelling and simulation of the dynamic behaviour of a ball screw system using transmission line modelling technique. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Moreno-Castaneda, V.Y., Pislaru, Crinela, Freeman, J.M. and Ford, Derek G. (2003) Modelling and simulation of a feed drive using the transmission line modelling technique. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 193-202. ISBN 9781853129902

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2011) Acceleration computing process in wavelength scanning interferometry. In: 10th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2011), 29th June - 2nd July 2011, Daejeon, S. Korea. (Unpublished)

Muller, M and Barrans, Simon (2009) Ultimate axial load capacity of v-band clamp joints. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 14-18. ISBN 9781862180857

Muller, Matthias and Barrans, Simon (2010) Impact of flange geometry on the ultimate axial load capacity of V-band clamps. In: Conference papers: 9th International Conference on Turbochargers and Turbocharging. Institution of Mechanical Engineers, London, pp. 183-192. ISBN 978-1-907599-15-6

Muller, Matthias and Barrans, Simon (2010) Predicting and determining the contact pressure distribution in joints formed by v-band clamps. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 154-159. ISBN 9781862180932

Myers, Alan (2004) Firm foundations for sure. Machinery, 162 (4. p. 48.

Myers, Alan, Barrans, Simon and Ford, Derek G. (2007) Structural Analysis of a Large Moving Gantry Milling Machine including its Work Support System and Foundation. In: Laser Metrology and Machine Performance VIII. Euspen Ltd, Euspen Headquarters, Cranfield University, pp. 63-72. ISBN 9780955308239

Myers, Alan, Barrans, Simon, Longstaff, Andrew P., Fletcher, Simon and Ford, Derek G. (2009) Evaluation and Comparison of a Large Machine Tool Structure with ISO Standard Alignment Tests. In: Laser Metrology and Machine Performance. Euspen Ltd, euspen headquarters, University of Cranfield, pp. 57-66. ISBN 978-0-9553082-7-7

Myers, Alan, Ford, Derek G. and Barrans, Simon (2005) Finite element analysis of the static stiffness of a foundation for large machine tool. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Myers, Alan, Ford, Derek G. and Xu, Q. (2005) Measurement techniques for determining the static stiffness of foundations for machine tools. Journal Paper of Physics: Conference Series, 13. pp. 410-413. ISSN 1742-6588

Myers, Alan, Ford, Derek G. and Xu, Qiang (2003) Finite element analysis of the structural dynamics of a vertical milling machine. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 431-440. ISBN 9781853129902

Myers, Alan, Pislaru, Crinela, Longstaff, Andrew P. and Fletcher, Simon (2008) Machine Tool Accuracy and Real-Time Control. In: Research Festival - School of Computing and Engineering Research Open Day, Friday 7th March 2008, University of Huddersfield. (Unpublished)

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modern techniques for condition monitoring of railway vehicle dynamics. Journal of Physics: Conference Series, 364. 012016. ISSN 1742-6596

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Review of control strategies used in modern railway vehicles. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 160. ISBN 978-1-86218-106-9

Olabode, OIaide Felix, Fletcher, Simon, Longstaff, Andrew P. and Mian, Naeem S. (2019) Precision Core Temperature Measurement of Metals Using an Ultrasonic Phase-Shift Method. Journal of Manufacturing and Materials Processing, 3 (3). pp. 1-12. ISSN 2504-4494

Olabode, Olaide Felix, Fletcher, Simon, Longstaff, Andrew P. and Mian, Naeem S. (2019) Core Temperature Measurement in Subtractive Manufacturing Processes. In: Laser Metrology and Machine Performance (LAMDAMAP) 2019", 13th March-14th March, 2019, AMRC, Sheffield, UK.

Othman, Aisha, Pislaru, Crinela, Impes, Ahmed and Wilson, David (2014) Virtual Lab for Teaching a Computer Programming Course. In: International Conference on Communication, Media, Technology and Design, 24 - 26 April 2014, Istanbul, Turkey.

Othman, Aisha, Impes, Ahmed and Pislaru, Crinela (2013) Online Interactive Module for Teaching a Computer Programming Course. In: Proceedings of the 12th European Conference on eLearning. ECEL 2013 . Academic Conferences and Publishing International Limited, Sophia Antipolis, France. ISBN 978-1-909507-82-1

Othman, Aisha and Pislaru, Crinela (2014) Increasing the quality of student outcomes by using e-learning system in computer programming courses. In: Libya Higher Education Forum, 5th-6th June 2014, London, UK.

Othman, Aisha, Pislaru, Crinela and Impes, Ahmed (2013) Determination of Skills Gap between school-Based Learning and Laboratory-Based Learning in Omar Al-Mukhtar University. International Journal of Social Science and Engineering, 7 (10).

Othman, Aisha, Pislaru, Crinela and Impes, Ahmed (2014) Improving the Quality of Technology-Enhanced Learning for Computer Programming Courses. International Journal of Information and Education Technology, 4 (1). pp. 83-88. ISSN 2010-3689

Ousey, Karen and Pislaru, Crinela (2011) E-learning used to develop an effective expertise of HE stakeholders. In: E-learning used to develop an effective expertise of HE stakeholders, 9th March 2011, University of Huddersfield. (Unpublished)

Papananias, Moschos, Fletcher, Simon, Longstaff, Andrew P. and Forbes, Alistair Barrie (2017) Uncertainty evaluation associated with versatile automated gauging influenced by process variations through design of experiments approach. Precision Engineering, 49. pp. 440-455. ISSN 0141-6359

Papananias, Moschos, Fletcher, Simon, Longstaff, Andrew P. and Mengot, Azibananye (2016) A novel method based on Bayesian regularized artificial neural networks for measurement uncertainty evaluation. In: euspen's 16th International Conference & Exhibition, 30 May - 3 June, Nottingham, UK. european society for precision engineering and nanotechnology, pp. 97-98. ISBN 978-0-9566790-8-6

Papananias, Moschos, Fletcher, Simon, Longstaff, Andrew P., Mengot, Azibananye, Jonas, Kevyn and Forbes, Alistair B. (2017) Evaluation of automated flexible gauge performance using experimental designs. In: Laser Metrology and Machine Performance XII, Lamdamap 2017. euspen, Renishaw Innovation Centre, Wotton-under-Edge, UK, pp. 45-54. ISBN 9780956679093

Papananias, Moschos, Fletcher, Simon, Longstaff, Andrew P., Mengot, Azibananye, Jonas, Kevyn and Forbes, Alistair B. (2017) Modelling uncertainty associated with comparative coordinate measurement through analysis of variance techniques. In: Proceedings of the 17th International Conference & Exhibition. euspen, Hannover, Germany, pp. 407-408. ISBN 978-0995775107

Parkinson, S., Longstaff, Andrew P., Crampton, Andrew, Fletcher, Simon, Allen, Gary and Myers, Alan (2012) Automation as a Solution for Machine Tool Calibration Planning. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 57-62. ISBN 978-1-86218-106-9

Parkinson, Simon and Crampton, Andrew (2013) A Novel Software Tool for Analysing NT® File System Permissions. International Journal of Advanced Computer Science and Applications, 4 (6). pp. 266-272. ISSN 2156-5570

Parkinson, Simon and Longstaff, Andrew P. (2012) Increasing the Numeric Expressiveness of the Planning Domain Definition Language. Proceedings of The 30th Workshop of the UK Planning and Scheduling Special Interest Group (PlanSIG2012).

Parkinson, Simon and Longstaff, Andrew P. (2015) Multi-objective optimisation of machine tool error mapping using automated planning. Expert Systems With Applications, 42 (6). pp. 3005-3015. ISSN 0957-4174

Parkinson, Simon, Longstaff, Andrew P., Allen, Gary, Crampton, Andrew, Fletcher, Simon and Myers, Alan (2011) Hierarchical Task Based Process Planning For Machine Tool Calibration. Proceedings of The 29th Workshop of the UK Planning and Scheduling Special Interest Group (PlanSIG2011). pp. 53-60. ISSN 1368-5708

Parkinson, Simon, Longstaff, Andrew P., Crampton, Andrew and Gregory, Peter (2012) The Application of Automated Planning to Machine Tool Calibration. In: Proceedings of the 22nd International Conference on Automated Planning and Scheduling (ICAPS 2012). ICAPS 2012, Atibaia, São Paulo, Brazil, pp. 216-224. ISBN 9781577355625

Parkinson, Simon, Longstaff, Andrew P. and Fletcher, Simon (2014) Automated planning to minimise uncertainty of machine tool calibration. Engineering Applications of Artificial Intelligence, 30. pp. 63-72. ISSN 0952-1976

Parkinson, Simon, Longstaff, Andrew P., Fletcher, Simon, Allen, Gary, Crampton, Andrew and Myers, Alan (2011) Controlling Machine Tool Accuracy Through a Robust Calibration Process. In: Yorkshire and North East Vitae Public Engagement Competition, 6th April 2011, Durham town hall. (Unpublished)

Parkinson, Simon, Longstaff, Andrew P., Fletcher, Simon, Allen, Gary, Crampton, Andrew and Myers, Alan (2010) A novel framework for establishing a machine tool quality metric. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932

Parkinson, Simon, Longstaff, Andrew P., Fletcher, Simon, Crampton, Andrew, Allen, Gary and Myers, Alan (2011) Cryptographic Techniques in Metrology Software. In: University of Huddersfield Annual Research Festival School of Computing and Engineering 12th March 2010, Friday 12th March 2010, University of Huddersfield. (Submitted)

Parkinson, Simon, Longstaff, Andrew P., Fletcher, Simon, Crampton, Andrew and Gregory, Peter (2012) Automatic planning for machine tool calibration: A case study. Expert Systems with Applications, 39 (13). pp. 11367-11377. ISSN 09574174

Perkins, Chris J, Longstaff, Andrew P., Fletcher, Simon, Willoughby, P and Verma, Rocky (2010) Limitations of Data Handling within the Machine Tool Service environment. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 192. ISBN 9781862180932

Perkins, Christopher, Longstaff, Andrew P., Fletcher, Simon and Willoughby, Peter (2012) Practical Implementation of Machine tool Metrology and Maintenance Management Systems. Journal of Physics: Conference Series, 364. 012105. ISSN 1742-6596

Pillutla, G., Mishra, Rakesh, Barrans, Simon and Barrans, J (2009) Experimental and numerical prediction of airflow in a room - literature summary. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 172-177. ISBN 9781862180857

Pillutla, G., Mishra, Rakesh, Barrans, Simon and Barrans, John (2010) Evaluation of Loss Coefficient For Stand Alone Radiator. In: International Conference on Renewable Energy and Power Quality (ICREPQ'10), 23rd - 25th March 2010, Granada.

Pislaru, Crinela (2010) Connected world - teaching and supervising home and international students. In: Active and Interactive Learning – Sharing Best Practices, 17th November 2010, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2010) Development of Lifelong Learning Skills by Embedding E-learning into the Curriculum. In: HUDCETT conference, 11th May 2010, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2008) E-learning based approach in support of Problem Based Learning. In: Teaching and Learning Conference 2008: Enhancing Learning: Technology by Design, 15th September 2008, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2009) Improving engineering by using an interactive multimedia learning environment. In: The sixteenth International Conference on Learning, 1st-4th July 2009, Barcelona, Spain.

Pislaru, Crinela (2007) Modern vibration analysis and correction practices. In: Modern vibration analysis and correction practices, Tuesday 6th March 2007, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2009) Optimisation of real-time implementation for high speed feed drives models. In: Lamdamap 9th International Conference, 30th June – 2nd July 2009, Brunel University. (Unpublished)

Pislaru, Crinela (2001) Parameter identification and hybrid mathematical modelling techniques applied to non-linear control systems. Doctoral thesis, University of Huddersfield.

Pislaru, Crinela (2010) Pedagogical Research Group - Present and Future. In: Computing and engineering research festival, 12th March 2010, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2010) Research and teaching - can you have your cake and eat it too? In: Teaching and Learning Conference 2010: Connect 2. Teaching, Learning, Research, Enterprise, 13 September 2010, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2007) Sensors and condition monitoring practices. In: Getting The Most Out of Machinery Condition Monitoring - The Design, Development and Application of Sensors, Tuesday 13th March 2007, Birmingham, UK. (Unpublished)

Pislaru, Crinela (2010) Teaching and supervising home and international students. In: Active and Interactive Learning – Sharing Best Practices, 17th November 2010, University of Huddersfield. (Unpublished)

Pislaru, Crinela (2009) Using blended learning to explain complex scientific notions. In: Teaching and Learning Conference 2009 - Inspire: Delivering inspiring teaching, Monday 14th September 2009, University of Huddersfield, UK. (Unpublished)

Pislaru, Crinela (2008) The design of an interactive multimedia learning environment for flexible modern education. In: Teaching and Learning Conference 2008: Enhancing Learning: Technology by Design, 15th September 2008, University of Huddersfield. (Unpublished)

Pislaru, Crinela, Alseddiqi, Mohamed and Mishra, Rakesh (2010) Improving work based learning with E-learning systems. In: IET West Yorkshire Network Improving Work Based Learning with E-Learning systems, 10th February 2010, University of Huddersfield. (Unpublished)

Pislaru, Crinela, Ford, Derek G. and Freeman, J.M. (2003) Identification of modal parameters affecting the dynamic performance of CNC machine tools. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 161-170. ISBN 9781853129902

Pislaru, Crinela, Ford, Derek G. and Freeman, J.M. (2002) On modular modelling of CNC machine tool drives: a comparison between simulation and experimentation. In: OPTIM 2002, 2002, Romania. (Unpublished)

Pislaru, Crinela, Ford, Derek G. and Holroyd, Geoffrey (2004) Hybrid modelling and simulation of a computer numerical control machine tool feed drive. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 218 (2). pp. 111-120. ISSN 0959-6518

Pislaru, Crinela, Ford, Derek G. and Holroyd, Geoffrey (2002) Modelling non-linearities from CNC machine tool drives. In: OPTIM 2002, 2002, Romania. (Unpublished)

Pislaru, Crinela, Ford, Derek G. and Moreno-Castaneda, V.Y. (2005) Modelling and simulation of CNC machine tool feed drives. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Pislaru, Crinela, Ford, Derek G. and Myers, Alan (2009) Novel condition monitoring technique used for improved CNC machine tool performance. In: Laser metrology and machine performance IX. Euspen, pp. 176-186. ISBN 9780955308277

Pislaru, Crinela, Ford, Derek G., Widiyarto, Muhammad Helmi Nur, Longstaff, Andrew P. and Myers, Alan (2007) Hardware-in-the-loop implementation of modern CNC machine tool feed drive models. In: 8th International LAMDAMAP Conference, 26 - 28 June 2007, Cardiff University.

Pislaru, Crinela, Ford, Derek G., Widiyarto, Muhammad Helmi Nur and Myers, Alan (2005) Methods for modal parameters identification applied to CNC machine tool feed drives. In: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, Lamdamap 2005, 27th-30th June 2005, Cranfield University. (Unpublished)

Pislaru, Crinela, Freeman, J.M. and Ford, Derek G. (2003) Modal parameter identification for CNC machine tools using wavelet transform. International Journal of Machine Tools and Manufacture, 43 (10). pp. 987-993. ISSN 0890-6955

Pislaru, Crinela and Mishra, Rakesh (2009) Using VLEs to support student centred learning in control engineering education. In: 5th International Conference on Multimedia and Information Communication Technologies in education - m-ICTE2009 Conference, 22nd-24th April 2009, Lisbon, Portugal. (Unpublished)

Pislaru, Crinela, Moreno-Castaneda, V.Y. and Ford, Derek G. (2004) Dynamic model of a non-linear servo control system using transmission line modelling technique. In: UKACC International Conference CONTROL 2004, 6-9 September 2004, University of Bath. (Unpublished)

Pislaru, Crinela, Myers, Alan and Ford, Derek G. (2006) Methods for modelling and simulating the dynamic behaviour of CNC machine tool feed drives. In: EUSPEN 2006, 28th May - 1st June 2006, Baden bei Wien, Austria.

Pislaru, Crinela, Myers, Alan, Ford, Derek G. and Moreno-Castaneda, V.Y. (2006) Modelling the Dynamic Behaviour of CNC Machine Tool Feed Drives by Using a Novel 2D Transmission Line Model. In: EUSPEN 2006, 28th May- 1st June 2006, Baden bei Wien, Austria.

Pislaru, Crinela, Sztendel, S., Ford, Derek G. and Myers, Alan (2008) Real-time implementation of a novel transmission line matrix (TLM) model for high speed feed drives. In: MATAR 2008, 15th-18th September 2008, Prague University. (Unpublished)

Pislaru, Crinela, Widiyarto, Muhammad Helmi Nur, Ford, Derek G. and Myers, Alan (2007) Theoretical and experimental approach for the evaluation of structural dynamics of CNC machine tools. In: Lamdamap 2007 8th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance, 25th June-28th June 2007, Cardiff University, Wales. (Unpublished)

Potdar, Akshay, Longstaff, Andrew P., Fletcher, Simon and Abdulshahed, Ali (2013) Development of modular machine tool structural monitoring system. In: Proceedings of the International Conference on Advanced Manufacturing Engineering and Technologies. KTH Royal Institute of Technology, Stockholm, pp. 263-272. ISBN 978-91-7501-892-8

Potdar, Akshay, Longstaff, Andrew P., Fletcher, Simon and Mian, Naeem S. (2015) Application of multi sensor data fusion based on Principal Component Analysis and Artificial Neural Network for machine tool thermal monitoring. In: Laser Metrology and Machine Performance XI, LAMDAMAP 2015. EUSPEN, Huddersfield, UK, pp. 228-237. ISBN 978-0-9566790-5-5

Potdar, Akshay Anand, Fletcher, Simon and Longstaff, Andrew P. (2016) Performance characterisation of a new photo-microsensor based sensing head for displacement measurement. Sensors and Actuators A: Physical, 238. pp. 60-70. ISSN 09244247

Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, C. and Pislaru, Crinela (2007) Analysis and reduction of machine tool non-rigid errors. In: School of Computing and Engineering Annual Researchers’ Conference 2007, 14th December 2007, University of Huddersfield. (Unpublished)

Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, Simon and Pislaru, Crinela (2010) Off-line investigation of machine tool non-rigid errors. In: University of Huddersfield Annual Research Festival School of Computing and Engineering 12th March 2010, Friday 12th March 2010, University of Huddersfield. (Unpublished)

Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, Simon and Pislaru, Crinela (2008) Simulation of the structural elements of a three axis VMC for machine tool error compensation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 23-27. ISBN 978-1-86218-067-3

Radhi, H.E. and Barrans, Simon (2011) Comparison between Multiobjective Population-Based Algorithms in Mechanical Problem. Applied Mechanics and Materials, 110-16. pp. 2383-2389. ISSN 1662-7482

Radhi, H.E. and Barrans, Simon (2012) Comparison between multiobjective optimization algorithms. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 129-135. ISBN 978-1-86218-106-9

Radhi, H.E. and Barrans, Simon (2012) Comparison between multiobjective optimization algorithms. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield. ISBN 978-1-86218-106-9

Radhi, H.E. and Barrans, Simon (2013) Diversity metric assessment for multi-objective optimization. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 171-175. ISBN 9781862181212

Radhi, H.E. and Barrans, Simon (2010) Finite Element Analysis of Effect of Weld Toe Radius and Plate Thickness on Fatigue Life of Butt Welded Joint. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 60-64. ISBN 9781862180932

Shagluf, Abubaker, Longstaff, Andrew P. and Fletcher, Simon (2015) Derivation of a cost model to aid management of CNC machine tool accuracy maintenance. Journal of Machine Engineering, 15 (2). pp. 17-43. ISSN 1895-7595

Shagluf, Abubaker, Longstaff, Andrew P., Fletcher, Simon, Denton, Paul and Myers, Alan (2013) The importance of assessing downtime cost related factors towards an optimised machine tool calibration schedule. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 182-187. ISBN 9781862181212

Shagluf, Abubaker, Parkinson, Simon, Longstaff, Andrew P. and Fletcher, Simon (2018) Adaptive decision support for suggesting a machine tool maintenance strategy: from reactive to preventative. Journal of Quality in Maintenance Engineering, 24 (3). pp. 376-399. ISSN 1355-2511

Shoghi, K., Barrans, Simon and Rao, H.V. (2005) Plastic deformation in flat-section band clamps. Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science, 219 (1). pp. 93-102. ISSN 0954-4062

Shoghi, K., Barrans, Simon and Rao, H.V. (2004) Stress in V-section band clamps. Proceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science, 218 (3). pp. 251-261. ISSN 0954-4062

Simon, Parkinson, Andrew, Longstaff, Andrew, Crampton and Peter, Gregory (2014) Automated Planning for Multi-Objective Machine Tool Calibration: Optimising Makespan and Measurement Uncertainty. In: Proceedings of the Twenty-Fourth International Conference on Automated Planning and Scheduling. ICAPS 2014 . Association for the Advancement of Artificial Intelligence AAAI, Portsmouth, USA, pp. 421-429.

Sperring, T. and Pislaru, Crinela (2006) COMONET – the DTI knowledge transfer network for condition monitoring sensors. In: The European Conference in Lubrication Management and Technology LUBMAT 2006, 14-16 June 2006, Preston, UK.

Stout, K.J. and Barrans, Simon (2000) The design of aerostatic bearings for application to nanometre resolution manufacturing machine systems. Tribology International, 33 (12). pp. 803-809. ISSN 0301-679X

Sztendel, S. and Pislaru, Crinela (2009) Developing mechatronic models of modern CNC machine tools for real-time implementation. In: Lamdamap 9th International Conference, 30th June – 2nd July 2009, Brunel University. (Unpublished)

Sztendel, S. and Pislaru, Crinela (2008) Development of control grafical user interface (GUI)for a dSPACE real-time system. In: Research Festival - School of Computing and Engineering Research Open Day, Friday 7th March 2008, University of Huddersfield. (Unpublished)

Sztendel, S., Pislaru, Crinela, Ford, Derek G. and Myers, Alan (2008) Development of experiment control graphical user interface for Hardware in the Loop (HIL) simulations. In: MATAR 2008, 15th-18th September 2008, Prague University. (Unpublished)

Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Ford, Derek G., Myers, Alan and Poxton, Anthony (2010) Linking fed drive model with structural models for CNC machine tools. In: University of Huddersfield Annual Research Festival School of Computing and Engineering 12th March 2010, Friday 12th March 2010, University of Huddersfield. (Unpublished)

Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Myers, Alan, Fletcher, Simon and Ford, Derek G. (2012) Analysis of complex interactions between mechanical elements using ansys and simulink. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 136-141. ISBN 978-1-86218-106-9

Tan, Feng, Xu, Qiang, Lu, Zhongyu and Barrans, Simon (2013) The development of computational FE system for creep damage analysis of weldment. In: 6th International ‘HIDA’ Conference: Life/Defect Assessment & Failures in High Temperature Plant, 2nd-4th December 2013, Nagasaki, Japan.

Tansley, Dean, Fletcher, Simon and Longstaff, Andrew P. (2013) Smart sensor for surface temperature measurement on manufacturing machines. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 55-60. ISBN 9781862181212

White, A.J., Postlethwaite, S. R. and Ford, Derek G. (2001) Measuring and modelling thermal distortion on CNC machine tools. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 69-79. ISBN 9781853128905

White, A.J., Postlethwaite, S. R. and Ford, Derek G. (2001) A general purpose thermal error compensation system for CNC machine tools. In: Laser Metrology and Machine Performance V. WIT, Southampton, UK, pp. 3-13. ISBN 9781853128905

Widiyarto, Muhammad Helmi Nur, Ford, Derek G. and Pislaru, Crinela (2003) Evaluating the structural dynamics of a vertical milling machine. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 421-430. ISBN 9781853129902

Widiyarto, Muhammad Helmi Nur, Pislaru, Crinela, Ford, Derek G., Longstaff, Andrew P. and Myers, Alan (2005) Hybrid modelling technique applied to digital feed drives. In: Proceedings of the 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. European Society for Precision Engineering and Nanotechnology, pp. 454-463. ISBN 1861941188

Willoughby, P, Verma, M, Longstaff, Andrew P. and Fletcher, Simon (2010) A Holistic Approach to Quantifying and Controlling the Accuracy, Performance and Availability of Machine Tools. In: Proceedings of the 36th International MATADOR Conference. Springer, London, UK, pp. 313-316. ISBN 978-1-84996-431-9

Wright, Daniel, Murgatroyd, S., Longstaff, Andrew P., Myers, Alan and Fletcher, Simon (2010) Process control within an SME to increase output and achieve consistent manufacture of components. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield. ISBN 9781862180932

Xu, Qiang and Barrans, Simon (2003) The Development of multi-axial creep damage constitutive equations for 0.5Cr0.5Mo0.25V ferritic steel at 590.DEG.C.. JSME International Journal Series A, 46 (1). pp. 51-59. ISSN 13447912

Xu, Qiang, Barrans, Simon, Holmes, A. and Ford, Derek G. (2004) Understanding the dynamic response of a machine tool structure by finite element analysis. In: EUSPEN 4th International Conference, 30th May-3rd June 2004, Glasgow. (Unpublished)

Xu, Qiang, Cunningham, J. and Ford, Derek G. (2003) The improvement of geometric accuracy of FMS machine through retrofitting and compensation. International Journal for Manufacturing Science and Production, 5 (1/2). pp. 67-72. ISSN 0793-6648

Xu, Qiang, Cunningham, J. and Ford, Derek G. (2002) The improvement of geometric accuracy of FMS machine through retrofitting and compensation. In: Advances in Manufacturing Technology XVI: Proceedings of the Eighteenth National Conference on Manufacturing Research, Leeds Metropolitan University, UK, 10-12 September 2002. John Wiley and Sons, pp. 441-448. ISBN 9781860583780

Xu, Qiang and Ford, Derek G. (2002) Analytical and FE Identification of lowest natural frequency of a ball-screw drive in beaver machine. In: Advances in Manufacturing Technology XVI: Proceedings of the Eighteenth National Conference on Manufacturing Research, Leeds Metropolitan University, UK, 10-12 September 2002. John Wiley and Sons, pp. 247-251. ISBN 9781860583780

Xu, Qiang, Miller, B. and Ford, Derek G. (2003) A review of the fundamentals of the finite element simulation of metal cutting. In: Laser Metrology and Machine Performance VI. WIT Press, Southampton, pp. 391-399. ISBN 9781853129902

Yao, Shaowen, Barrans, Simon and Blunt, Liam (2007) Incompressible and Analytical Study on a Basic Model of Out-Pump Type Complex Journal Gas Bearings. In: The 8th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2007), 24-27 September 2007, Tohoku University, Sendai, Japan. (Unpublished)

Yao, Shaowen, Barrans, Simon and Blunt, Liam (2008) Incompressible and Analytical Study on a Basic Model of Out-Pump Type Complex Journal Gas Bearings. Key Engineering Materials, 381-38. pp. 153-156. ISSN 1013-9826

Zeng, Shengye, Blunt, Liam and Jiang, Xiang (2011) The application of Taguchi approach to optimise the processing conditions on bonnet polishing of CoCr. Key Engineering Materials, 496. pp. 235-240. ISSN 1013-9826

Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2009) Evaluation Of Fretting Wear On The Femoral Stem Surface. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco.

Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2007) Generation of fretting wear debris at the stem-cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-4.

Zhang, Hongyu, Blunt, Liam, Jiang, Xiang, Brown, Leigh, Barrans, Simon and Zhao, Y. (2008) Femoral stem wear in cemented total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 222 (5). pp. 583-592. ISSN 0954-4119

Zhang, Hongyu, Blunt, Liam, Jiang, Xiang, Fleming, Leigh and Barrans, Simon (2012) The influence of bone cement type on production of fretting wear on the femoral stem surface: A preliminary study. Clinical Biomechanics, 27 (7). pp. 666-672. ISSN 0268-0033

Zhang, Hongyu, Brown, L., Blunt, Liam and Barrans, Simon (2009) Evaluation of fretting wear on the femoral stem surface. In: International Conference on Bioengineering & Biomaterials, 18-29 March, Meknes, Moroco.

Zhang, Hongyu, Brown, Leigh, Blunt, Liam and Barrans, Simon (2008) Influence of femoral stem surface finish on the apparent static shear strength at the stem–cement interface. Journal of Mechanical Behaviour of Biomedical Materials, 1 (1). pp. 96-104. ISSN 1751-6161

Zhang, Hongyu, Brown, Leigh, Blunt, Liam and Barrans, Simon (2008) An investigation on generation of debris at the stem cement interface. In: 8th World Biomaterials Congress, 28th May -1st June 2008, Amsterdam, The Netherlands. (Unpublished)

Zhang, Hongyu, Brown, Leigh, Blunt, Liam, Jiang, Xiang and Barrans, Simon (2008) Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacement. Wear, 266 (5-6). pp. 566-569. ISSN 0043-1648