Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Library of Congress Subject Areas (15320)
- T Technology (2386)
  - TA Engineering (General). Civil engineering (General) (539)

Group by: Date | Creators | Item Type | Uncontrolled Keywords | No Grouping

3-D subsurface crack assessment 3D position measurement Abrasive Machining Acoustic Emission Monitoring active control Adaptive Controller adaptive morphological filter (AMF) adaptive sampling adjoint functors Aerodynamics Air-Injection air-inlet Aircraft Design alpha shape alternative fuels Ambisonics surround sound heuristic Tabu range-removal 5.1 analytical model Animal Husbandry annular annular flow ANSYS Arabic Letter Recognition artificial intelligence autonomic systems automated planning and scheduling control systems batch processing batch queuing Bernoulli’s equation biodiesel Biometrics Black metal blind bonnet polishing Braille Brake Brakes Building energy management campus grid Category Model Category Theory Cattle monitoring: Wireless sensor networks Centre of Pressure CFD Channel Estimation CI engine cloud cluster CMM CoCr alloy coding schemes coefficient Combustion Diagnosis communicative discourse Components Computer Clusters computer networks condition monitoring condition monitoring condition monitoring system Condor conductance sensors contaminants cooking cross correlation cross-correlation cycle stealing Data collection data plane data transmission database DC error component Delay tolerant networking Design for Manufactured Design for Six Sigma device discovery Di-PPM dicode pulse position modulation and error correction code Diesel Engine digital divide digital gap Dimensional metrology DiPPM (dicode pulse-position modulation) dispersive probing distributed systems distributed system middleware domestic communication domestic kitchen extraction Doppler velocity Drone e-books E-learning E-learning Libyan ICT digital gap e-learning barriers e-learning barriers elastic cloud electrical conductance technique electrical drives electrical energy electromagnetic Electronic education energy harvesting Energy harvesting energy recovery Engine performance Engineering Education Error compensation eucalyptus evolutionary design Exhaust Acoustics Exhaust emissions Experiential Learning expert system extraction hood FEA Finite element analysis Fixture Design Optimisation Flexible Flocking flow angle flow meter FMCG industry Folksonomy Fossil fuel fretting wear simulation friction factor Fuzzy Controller genetic algorithm Genetic algorithms Geometrical Product Specifications (GPS) Gorgoroth GPS grid HAPs hard disk Hardware and software design HE/FE research infrastructure health care Heat Transfer hegemonic masculinity hierarchical crossover high performance computing high performance throughput parallel processing homogenous flow HPC HTC HVAC Hybrid systems iaas IAQ ICT gap IEEE 802.15.4 image segmentation Indoor optical wireless induced voltage Inertia influence function Information retrieval integrated control Integrated modelling integrated optics intelligent sensing Interatomic Potentials Interface interface designs interferometer interferometry inverse problem ISO 9000 Standard ISO standards job scheduler Job Scheduling Judder Keystroke pattern Knowledge representation Knowledge-based System LABview Laser diodes Legendre Moments (LM) leisure Libyan ICT Line singularities Location Machine tool accuracy Machine tool calibration automation machine tool non-rigid errors Machinery Machinery Tools magnetic storage material removal material removal characteristic mathematical morphology Mathematics MATLAB MAUI metrology uncertainty surface texture parameter Microcontroller middleware MIMO Minimum Depth of Cut Modelling simulation scale roller rig critical speed Molecular Dynamics morphological filters morphological operations MOSA Mouldable benchmarking multi electrode multi-electrode electromagnetic flow meter Multi-objective optimization Multi-user multibody modelling multilateration multiphase flow multiphase velocity electromagnetic cross-correlation Labview Multiple sensors multiplexed fibre interferometer stabilisation surface measurement Nanomachining non-destructive evaluation (NDE) Objective Quality Measurment of Produced Music OFDM offline simulation Ontology Optical Character Recognition (OCR) optimal location optimal size OSCAR packets Pad abutment parallel processing paste polishing PBS phase shifting Piezoelectric Tranducer planes Point-Of-Sales power PPM PRBS (pseudorandom binary sequence) predictive analysis techniques predictive maintenance pressure drop private cloud profile measurement Propagation protocols PSD (power spectrum density) public cloud pull out test pulse position modulation qualitative frameworks of telework Radon transform rail vehicle dynamics railway vehicle Range cooker Real-time Communication reciprocating compressor Reflection Suppression research computing Reuse RFID Ridgelets RMS Value roughness CCI (Coherence Correlation Interferometer) routing scheduler Security Self-learning semantic hierarchy Sensor sexuality Shift invariance simulation consistence SME spatial resolution Spragging Stabilised Interferometer stability stem cement interface structured surfaces Surface characterisation Surface characterization surface measurement surface metrology surface texture Surfaces surround sound psychoacoustics switching Taxonomy Teaching and Learning technology transfer telework themes and taxonomy of telework Thermal deformations Thermal error Thermo-elastic tilt topology TORQUE Tracking transformer model Transient transient response Transmission Loss Inversion Turbocharged turbocharger Two-Point Air Injection Ubuntu enterprise cloud UEC Ultrasonic uniform sampling Validation trend mining Longitudinal data Temporal databases variable-length chromosome vegetable oil vehicle dynamics Velocity profile Venturi meter vibration viscosity visually impaired wavelength scanning Wavelength Scanning Interferometer wheel profiles wheel-rail interface wireless network Wireless Sensor Network Wireless Sensor Networks wizard of oz Work Environment Workbench Zernike Moments (ZM)

Number of items at this level: 538.

3-D subsurface crack assessment

Tian, G.Y., Sophian, A., Taylor, D. and Rudlin, J. (2005) Multiple sensors on pulsed eddy-current detection for 3-D subsurface crack assessment. IEEE Sensors Journal, 5 (1). pp. 90-96. ISSN 1530-437X

3D position measurement

Aldawi, Fouad, Longstaff, Andrew P., Fletcher, Simon, Mather, Peter, Myers, Alan and Briggs, Jack (2008) A multifrequency FM-based ultrasonic system for accuracy 3D measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 9-14. ISBN 978-1-86218-067-3

Abrasive Machining

Oluwajobi, Akinjide O. and Chen, Xun (2010) The Effect of Interatomic Potentials on Nanometric Abrasive Machining. In: Proceedings of the 16th International Conference on Automation & Computing, University of Birmingham, Birmingham, UK, 11 September 2010. Chinese Automation and Computing Society in the UK, pp. 130-135. ISBN 9780955529368

Acoustic Emission Monitoring

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2010) Online Monitoring of Engine Oil Quality Based on AE Signal Analysis. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 116-123. ISBN 9781862180932

active control

Ngigi, R, Pislaru, Crinela, Ball, Andrew, Fengshou, Gu and Anyakwo, Arthur (2011) Predictive Control Strategies Used to Solve Challenges Related to Modern Railway Vehicles. In: 5th IET Conference on Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 29-30 November 2011, Derby Conference Centre, UK.

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Review of control strategies used in modern railway vehicles. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 160. ISBN 978-1-86218-106-9

Adaptive Controller

Saeed, Bakhtiar I. and Mehrdadi, Bruce (2010) Intelligent Wireless Sensor Network. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 193. ISBN 9781862180932

adaptive morphological filter (AMF)

Yin, Ying and Tian, Gui Yun (2006) Automatic x-ray image characterisation for non-destructive evaluation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

adaptive sampling

Wang, Jian, Jiang, Xiang and Blunt, Liam (2010) Simulation of Adaptive Sampling in Profile Measurement for Structured Surfaces. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 48-53. ISBN 9781862180932

adjoint functors

Ding, Hao and Scott, Paul J. (2012) Structure of Mathematical Morphology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 20-24. ISBN 978-1-86218-106-9

Aerodynamics

Malviya, Vihar, Mishra, Rakesh and Gundala, Naresh (2009) CFD-Based Modelling of the Variation of Aerodynamic Coefficients with Wind Angle. In: Proceeding of National Conference on Fluid Mechanics & Fluid Power 17-19 December 2009. College of Engineering Pune, Pune, India.

Air-Injection

Gilkes, Oliver S. and Mishra, Rakesh (2006) Comparison of passive and active methods for improving transient performance of turbocharged engine systems. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

air-inlet

Odunze, N., Mishra, Rakesh and Reed, J. (2007) The CFD analysis of the effects of the size and location of an Air-Inlet in domestic kitchen extraction. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

Aircraft Design

Needham, Paul M. (2006) Design for Six Sigma, its Potential Effect on Weight in Modern Military Aircraft. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

alpha shape

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2010) A Fast Algorithm for Morphological Filters. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 190. ISBN 9781862180932

alternative fuels

Abuhabaya, Abdullah, Fieldhouse, John D. and Brown, D.R. (2010) Evaluation of Properties and use of waste vegetable oil (WVO), pure vegetable oils and standard diesel as used in a compression ignition engine. In: Future Technologies in Computing and Engineering Annual Researchers' Conference (CEARC'10). The University of Huddersfield , University of Huddersfield, Computing and Engineering Annual Researchers’ Conference 2010, pp. 71-76. ISBN 9781862180932

Algasim, Hamad and Fieldhouse, John D. (2010) Performance and emissions of compression ignition engines using waste cooked oil as fuel. In: Future Technologies in Computing and Engineering Annual Researchers' Conference (CEARC'10). The University of Huddersfield, Huddersfield, UK, pp. 65-70. ISBN 9781862180932

Ambisonics surround sound heuristic Tabu range-removal 5.1

Moore, John David and Wakefield, Jonathan P. (2006) An enhanced approach to surround sound decoder design. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

analytical model

Animal Husbandry

de Souza Neto, J.M.R., Silva, J.J.C., Cavalcanti, T.C.M., da Rocha Neto, J.S. and Glover, Ian (2012) Low-Cost WSN Monitoring and Location of Small Ruminants Using Transmission-Loss Inversion on Open Grassland in Brazil. Journal of Wireless Networking and Communications, 2 (5). pp. 101-110. ISSN 2167-7328

annular

Musbah, Abdurazzaq and Lucas, Gary (2012) Wet gas flow metering technique using a venturi with conductance sensors. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 159. ISBN 978-1-86218-106-9

annular flow

Hasan, Abbas and Lucas, Gary (2011) Experimental and theoretical study of the gas–water two phase flow through a conductance multiphase Venturi meter in vertical annular (wet gas) flow. Nuclear Engineering and Design, 241 (6). pp. 1998-2005. ISSN 00295493

Musbah, Abdurazzaq and Lucas, Gary (2012) Experimental and theoretical study of annular flow using a venturi with conductance sensors. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 123-128. ISBN 978-1-86218-106-9

ANSYS

Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Myers, Alan, Fletcher, Simon and Ford, Derek G. (2012) Analysis of complex interactions between mechanical elements using ansys and simulink. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 136-141. ISBN 978-1-86218-106-9

Arabic Letter Recognition

Aboaisha, Hosain, Xu, Zhijie and El-Feghi, Idris (2012) An investigation on efficient feature extraction approaches for Arabic letter recognition. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 80-85. ISBN 978-1-86218-106-9

artificial intelligence

Ashari, D., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Artificial intelligence-based condition monitoring for practical electrical drives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 143. ISBN 978-1-86218-106-9

autonomic systems automated planning and scheduling control systems

Jimoh, F. and McCluskey, T.L. (2012) Using automated planning to enable autonomic properties in computer systems. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 150. ISBN 978-1-86218-106-9

batch processing

Kureshi, Ibad, Holmes, Violeta, Cooke, D., Allan, R., Liang, Shuo and Gubb, D. (2012) Robust mouldable intelligent scheduling using application benchmarking for elastic environments. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 156. ISBN 978-1-86218-106-9

batch queuing

Kureshi, Ibad, Holmes, Violeta, Liang, Shuo and Cooke, D. (2012) Optimising multi-user and multi-application HPC system utilisation using effective queue management. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 154. ISBN 978-1-86218-106-9

Bernoulli’s equation

Hasan, Abbas and Lucas, Gary (2007) Modeling of a homogenous gas-water two phase flow through a Venturi and vertical pipe (A prediction of pressure drop sign change in two phase flow). In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

biodiesel

Biometrics

Yang, Chunlei, Tian, Gui Yun and Ward, Stephen (2006) Multibiometrics authentication in pos application. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Black metal

Mynett, Mark, Wakefield, Jonathan P. and Till, Rupert (2010) Intelligent Equalisation Principles and Techniques for Minimising Masking when Mixing the Extreme Modern Metal Genre. In: Heavy Fundamentalisms: Music, Metal and Politics. Inter-Disciplinary Press, Oxford, pp. 141-146. ISBN 978-1-84888-017-7

blind

Arif, S. (2012) Electronic Braille Document Reader. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 142. ISBN 978-1-86218-106-9

bonnet polishing

Zeng, S., Blunt, Liam and Jiang, Xiang (2012) Material removal investigation in bonnet polishing of CoCr alloy. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 25-30. ISBN 978-1-86218-106-9

Braille

Brake

Bryant, David, Crampton, Andrew, Fieldhouse, John D. and Talbot, Chris J. (2006) Discussion of characteristics of brake judder and the necessary data acquisition system for complete analysis. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Brakes

Palmer, Edward, Mishra, Rakesh and Fieldhouse, John D. (2006) Analysis of air flow and heat dissipation from a high performance passenger car front brake rotor. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Building energy management

Feradyan, A. and Holmes, Violeta (2012) Autonomous wireless sensor for building energy management with energy harvesting feasibility. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 145. ISBN 978-1-86218-106-9

campus grid

Kureshi, Ibad, Holmes, Violeta, Liang, Shuo, Gubb, D. and Cooke, D. (2012) High performance distributed computing resources to enable e-science research. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 153. ISBN 978-1-86218-106-9

Category Model

Wang, Yan, Scott, Paul J. and Jiang, Xiang (2006) Category model to modeling the surface texture knowledge-base. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-7.

Category Theory

Cattle monitoring: Wireless sensor networks

Kwong, Kae Hsiang, Wu, Tsung-Ta, Goh, Hock Guan, Sasloglou, Konstantinos, Stephen, Bruce, Glover, Ian, Shen, Chong, Du, Wencai, Michie, Craig and Andonovic, Ivan (2012) Practical considerations for wireless sensor networks in cattle monitoring applications. Computers and Electronics in Agriculture, 81. pp. 33-44. ISSN 0168-1699

Centre of Pressure

Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2010) Investigation of brake squeal and the influence of the abutment faces. In: Proceedings of 6th European Conference on Braking, JEF 2010. European Conference on Braking . Groupement Regional Nord/Pas-de-Calais pour la Recherche dans les Transports, Universite de Lille 1, France, pp. 255-262.

CFD

Channel Estimation

Mohammed, Hasanain, Sibley, Martin J.N. and Mather, Peter (2010) Investigation of doppler effects on high mobility OFDM-MIMO systems. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 142-147. ISBN 9781862180932

CI engine

cloud

Kureshi, Ibad, Holmes, Violeta, Gubb, D., Liang, Shuo, Bonner, S. A. R. and Cooke, D. (2012) Providing laaS using a private cloud in an HE environment. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 155. ISBN 978-1-86218-106-9

cluster

CMM

Li, Feng, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2012) Integrated Tactile and Optical Measuring Systems in Three Dimensional Metrology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 1-6. ISBN 978-1-86218-106-9

CoCr alloy

Zeng, Shengye, Blunt, Liam, Jiang, Xiang and Bills, Paul J. (2010) Investigation of the material removal characteristic for polishing CoCr alloy. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 177-182. ISBN 9781862180932

coding schemes

coefficient

Combustion Diagnosis

Jiang, Xiang, Gu, Fengshou and Ball, Andrew (2008) Automotive Diesel Engine Performance and Condition Monitoring using Downpipe Acoustic Waveform Analysis. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

communicative discourse

Components

Lan, Xiangqi, Blunt, Liam and Xiao, Shaojun (2010) Building a Flexible Surface Characterisation System Architecture. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 43-47. ISBN 9781862180932

Computer Clusters

Gubb, D., Holmes, Violeta, Kureshi, Ibad and James, Y. (2012) Implementing a Condor pool using a Green-IT policy. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 146. ISBN 978-1-86218-106-9

computer networks

James, Y., Holmes, Violeta, Kureshi, Ibad, Gubb, D. and Liang, Shuo (2012) Design of a new network infrastructure using RPC for the University of Huddersfield campus grid. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 149. ISBN 978-1-86218-106-9

condition monitoring

Anyakwo, A., Pislaru, Crinela, Ball, Andrew and Fengshou, Gu (2011) Modelling the Dynamic Behaviour of the Wheel-Rail Interface by Using a Novel 3D Wheel-Rail Contact Model. In: 5th IET Conference on Railway Condition Monitoring and Non-Destructive Testing (RCM 2011) , 29-30 November 2011, Derby Conference Centre, UK.

Appadoo, Robin, Ball, Andrew and Gu, Fengshou (2010) Optimizing condition monitoring techniques applied to a three stage reciprocating compressor in a FMCG industry. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 185. ISBN 9781862180932

condition monitoring system

Condor

conductance sensors

Muhamedsalih, Y. and Lucas, Gary (2012) A Non-Intrusive Impedance Cross-Correlation (ICC) Flow Meter for Dispersed Phase Velocity and Volume Fraction Profile Measurement in Two Phase Flows. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 158. ISBN 978-1-86218-106-9

Muhamedsalih, Yousif and Lucas, Gary (2012) A Non-Intrusive Impedance Cross-Correlation (ICC) Flow Meter for Dispersed Phase Velocity and Volume Fraction Profile Measurement in Two Phase Flows. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 38-44. ISBN 978-1-86218-106-9

contaminants

cooking

cross correlation

cross-correlation

cycle stealing

Data collection

data plane

data transmission

database

Jimoh, F. and Holmes, Violeta (2012) Design of a wireless patient diagnosis system. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 69-74. ISBN 978-1-86218-106-9

DC error component

Ali, M. and Lucas, Gary (2012) Optimisation of a Voltage Measurement and Control Circuit for an Imaging Electromagnetic Flow Meter. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 45-50. ISBN 978-1-86218-106-9

Delay tolerant networking

Design for Manufactured

Design for Six Sigma

device discovery

Di-PPM

Buhafa, Adel M and Sibley, Martin J.N. (2010) Performance of Di-code Pulse Position Modulation Technique in Diffuse Indoor Wireless Optical Communication Systems. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 188. ISBN 9781862180932

dicode pulse position modulation and error correction code

Al-Nedawe, Basman, Sibley, Martin J.N. and Mather, Peter (2010) Microelectronic implementation of error correcting codes for dicode pulse position modulation. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 184. ISBN 9781862180932

Diesel Engine

digital divide

Elzawi, A. and Wade, Steve (2012) Barriers to ICT adoption in quality of engineering research in Libya : how to bridge the digital divide. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 144. ISBN 978-1-86218-106-9

Elzawi, A. and Wade, Steve (2012) Barriers to ICT adoption in quality of engineering research in Libya : how to bridge the digital divide? In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 98-103. ISBN 978-1-86218-106-9

digital gap

Kenan, T. and Pislaru, Crinela (2012) Challenges related to the implementation of e-learning in higher education institutions in Libya. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 116-122. ISBN 978-1-86218-106-9

Dimensional metrology

DiPPM (dicode pulse-position modulation)

Charitopoulos, Romanos and Sibley, Martin J.N. (2006) Power Spectral Density of Dicode Pulse Position Modulation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-5.

dispersive probing

Hassan, Mothana A., Jiang, Xiang and Haydn, Martin (2012) Fast surface metrology using wavelength scanning and dispersive white light interferometry. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 148. ISBN 978-1-86218-106-9

Hassan, Mothana A., Jiang, Xiang and Martin, Haydn (2012) Comparison of the fringe visibility created by zero and first order diffracted beams in a dispersive interferometer. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 110-115. ISBN 978-1-86218-106-9

distributed systems

distributed system middleware

domestic communication

Li, Andol X and Bonner, John V.H. (2010) Improving prototype consistence for wizard-of-oz simulations and evaluations. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 136-141. ISBN 9781862180932

domestic kitchen extraction

Doppler velocity

Drone

e-books

E-learning

E-learning Libyan ICT digital gap e-learning barriers

Kenan, T. and Pislaru, Crinela (2012) Challenges related to e-learning implementation in higher education institutions in Libya. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 151. ISBN 978-1-86218-106-9

e-learning barriers

elastic cloud

electrical conductance technique

electrical drives

electrical energy

Wang, R., Gu, Fengshou and Ball, Andrew (2012) Energy recovery system optimisation in automotives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 161. ISBN 978-1-86218-106-9

electromagnetic

Electronic education

energy harvesting

Energy harvesting

energy recovery

Engine performance

Engineering Education

Alseddiqi, Mohamed and Mishra, Rakesh (2010) A Diagnostic study on the teaching and learning styles in engineering education. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 105-109. ISBN 9781862180932

Error compensation

Postlethwaite, Scott R. (1992) Electronic based accuracy enhancement of CNC machine tools. Doctoral thesis, Huddersfield Polytechnic.

eucalyptus

evolutionary design

Bentley, Peter J. and Wakefield, Jonathan P. (1996) Hierarchical Crossover in Genetic Algorithms. In: Proceedings of the 1st On-line Workshop on Soft Computing (WSC1), 19-30 August 1996, Nagoya University, Japan.

Bentley, Peter J. and Wakefield, Jonathan P. (1996) Overview of a Generic Evolutionary Design System. In: Proceedings of the 2nd On-line Workshop on Evolutionary Computation (WEC2), 4-22 March 1996, Nagoya University, Japan.

Exhaust Acoustics

Exhaust emissions

Experiential Learning

expert system

extraction hood

FEA

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2008) Novel and efficient thermal error reduction strategy for machine tool performance improvement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 15-22. ISBN 978-1-86218-067-3

Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, Simon and Pislaru, Crinela (2008) Simulation of the structural elements of a three axis VMC for machine tool error compensation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 23-27. ISBN 978-1-86218-067-3

Finite element analysis

Fixture Design Optimisation

Yeung, Ka Yiu and Chen, Xun (2007) 3D freeform component fixture design optisation using a genetic algorithm. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-6.

Flexible

Flocking

flow angle

flow meter

FMCG industry

Folksonomy

Binzabiah, R. and Wade, Steve (2012) An Approach to Developing an Ontology that Represents Knowledge Embedded in Filmed Materials. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 91-97. ISBN 978-1-86218-106-9

Fossil fuel

fretting wear simulation

Zhang, H., Brown, L. and Blunt, Liam (2006) Investigation of characteristics at the stem cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

friction factor

Fuzzy Controller

genetic algorithm

Genetic algorithms

Radhi, H.E. and Barrans, Simon (2012) Comparison between multiobjective optimization algorithms. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 129-135. ISBN 978-1-86218-106-9

Geometrical Product Specifications (GPS)

Qi, Qufen, Blunt, Liam, Scott, Paul J. and Jiang, Xiang (2010) Modeling of the concepts in ISO standards for profile surface texture. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 172-176. ISBN 9781862180932

Gorgoroth

GPS

grid

HAPs

hard disk

Yang, Shuming and Jiang, Xiang (2006) The roughness measurement of the super-smooth surface of hard disks. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-7.

Hardware and software design

HE/FE research infrastructure

health care

Heat Transfer

hegemonic masculinity

hierarchical crossover

high performance computing

high performance throughput parallel processing

homogenous flow

HPC

HTC

HVAC

Hybrid systems

iaas

IAQ

ICT gap

IEEE 802.15.4

image segmentation

Indoor optical wireless

induced voltage

Inertia

influence function

Information retrieval

integrated control

Integrated modelling

integrated optics

Kumar, Prashant, Martin, Haydn, Maxwell, Graeme and Jiang, Xiang (2012) Design and Development of a Self Calibrated Optical Chip Interferometer for High Precision On-line Surface Measurement. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 14-19. ISBN 978-1-86218-106-9

Kumar, Prashant, Martin, Haydn, Maxwell, Graeme and Jiang, Xiang (2012) Design and development of a self calibrated optical chip interferometer for high precision on-line surface measurement. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 152. ISBN 978-1-86218-106-9

intelligent sensing

Interatomic Potentials

Interface

interface designs

interferometer

interferometry

inverse problem

ISO 9000 Standard

Maatgi, Musbah and Denton, Paul (2010) Achieving ISO 9000 Success in SMEs: The Development of a Work Environment Framework. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 37-42. ISBN 9781862180932

ISO standards

job scheduler

Job Scheduling

Judder

Keystroke pattern

Knowledge representation

Knowledge-based System

LABview

Laser diodes

Fletcher, Simon, Longstaff, Andrew P. and Myers, Alan (2005) Investigation into the accuracy of a proposed laser diode based multilateration machine tool calibration system. Journal Paper of Physics: Conference Series, 13. pp. 398-401. ISSN 1742-6588

Legendre Moments (LM)

leisure

Libyan ICT

Line singularities

Ma, J.W., Jiang, Xiang and Scott, Paul J. (2005) Complex ridgelets for shift invariant characterizaion of surface topography with line singularities. Physics Letters A, 344. pp. 423-431. ISSN 0375-9601

Location

Machine tool accuracy

Machine tool calibration automation

Parkinson, S., Longstaff, Andrew P., Crampton, Andrew, Fletcher, Simon, Allen, Gary and Myers, Alan (2012) Automation as a Solution for Machine Tool Calibration Planning. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 57-62. ISBN 978-1-86218-106-9

machine tool non-rigid errors

Machinery

Postlethwaite, Scott R. (1992) Electronic based accuracy enhancement of CNC machine tools. Doctoral thesis, Huddersfield Polytechnic.

Machinery Tools

Postlethwaite, Scott R. (1992) Electronic based accuracy enhancement of CNC machine tools. Doctoral thesis, Huddersfield Polytechnic.

magnetic storage

material removal

material removal characteristic

mathematical morphology

Mathematics

Postlethwaite, Scott R. (1992) Electronic based accuracy enhancement of CNC machine tools. Doctoral thesis, Huddersfield Polytechnic.

MATLAB

MAUI

metrology uncertainty surface texture parameter

Brennan, James K., Jiang, Xiang, Crampton, Andrew and Leach, Richard K. (2006) Propagation of measurement uncertainty for surface texture parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Microcontroller

middleware

MIMO

Minimum Depth of Cut

Oluwajobi, Akinjide O. and Chen, Xun (2010) On Minimum Depth of Cut in nanomachining. In: Advances in manufacturing technology. Durham University and Glasgow Caledonian University, Durham, pp. 174-179. ISBN 9781905866519

Modelling simulation scale roller rig critical speed

Anyakwo, A., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Dynamic simulation of a roller rig. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 51-56. ISBN 978-1-86218-106-9

Molecular Dynamics

morphological filters

Lou, Shan, Jiang, Xiang and Scott, Paul J. (2012) An Introduction to Morphological Filters in Surface Metrology. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 7-13. ISBN 978-1-86218-106-9

morphological operations

MOSA

Mouldable benchmarking

multi electrode

multi-electrode electromagnetic flow meter

Leeungculsatien, Teerachai and Lucas, Gary (2012) Measurement of velocity profiles in multiphase flow using a multi-electrode electromagnetic flow meter. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 31-37. ISBN 978-1-86218-106-9

Multi-objective optimization

Multi-user

multibody modelling

multilateration

multiphase flow

multiphase velocity electromagnetic cross-correlation Labview

Meng, Yiqing and Lucas, Gary (2012) A Multiphase Flow Measurement System Comprising an Impedance Cross Correlation (ICC) Device and an Imaging Electromagnetic Flow Meter (IEF). In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 157. ISBN 978-1-86218-106-9

Multiple sensors

multiplexed fibre interferometer stabilisation surface measurement

Martin, Haydn (2006) A self stabilising multiplexed interferometer for on-line surface measurement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Nanomachining

non-destructive evaluation (NDE)

Objective Quality Measurment of Produced Music

Fenton, Steven, Wakefield, Jonathan P. and Fazenda, Bruno (2011) Objective Measurement of Music Quality Using Inter-Band Relationship Analysis. In: AES 130th Conference, 13th-16th May, Hosted in London, UK., 13-16 May 2011, London.

OFDM

offline simulation

Ontology

Optical Character Recognition (OCR)

optimal location

optimal size

OSCAR

packets

Pad abutment

parallel processing

paste polishing

PBS

phase shifting

Piezoelectric Tranducer

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2010) Vibration compensation of wavelength scanning interferometer for in-process surface inspection. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 148-153. ISBN 9781862180932

planes

Point-Of-Sales

power

PPM

PRBS (pseudorandom binary sequence)

predictive analysis techniques

predictive maintenance

pressure drop

private cloud

profile measurement

Propagation

protocols

PSD (power spectrum density)

public cloud

pull out test

pulse position modulation

qualitative frameworks of telework

Haq, K. A. and Ward, Rupert (2012) Preliminary frameworks and models for telework maturity within organisations. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 104-109. ISBN 978-1-86218-106-9

Haq, K. A., Ward, Rupert and Wilkinson, Julie (2012) Preliminary frameworks and models for telework maturity within organisations. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 147. ISBN 978-1-86218-106-9

Radon transform

rail vehicle dynamics

railway vehicle

Range cooker

Real-time Communication

reciprocating compressor

Reflection Suppression

research computing

Reuse

RFID

Ridgelets

RMS Value

roughness CCI (Coherence Correlation Interferometer)

routing

scheduler

Security

Self-learning

semantic hierarchy

Sensor

sexuality

Shift invariance

simulation consistence

SME

spatial resolution

Spragging

Stabilised Interferometer

stability

stem cement interface

structured surfaces

Surface characterisation

Surface characterization

surface measurement

Jiang, Xiang (2009) The evolution of surfaces and their measurement. In: The 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia. (Unpublished)

surface metrology

surface texture

Surfaces

surround sound psychoacoustics

Moore, David J. and Wakefield, Jonathan P. (2007) Surround Sound for Large Audiences: What are the Problems? In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

switching

Taxonomy

Teaching and Learning

technology transfer

telework

themes and taxonomy of telework

Thermal deformations

Thermal error

Thermo-elastic

tilt

topology

TORQUE

Tracking

transformer model

Transient

transient response

Gilkes, Oliver S., Mishra, Rakesh, Fieldhouse, John D. and Rao, H.V. (2008) Transient response of turbocharged diesel engine for transient operation using air injection assist system. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Transmission Loss Inversion

Turbocharged

turbocharger

Two-Point Air Injection

Ubuntu enterprise cloud

UEC

Ultrasonic

uniform sampling

Validation trend mining Longitudinal data Temporal databases

Somaraki, V. and McCluskey, T.L. (2012) A robust validation framework for trend mining : a study in diabetic retinopathy. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 63-68. ISBN 978-1-86218-106-9

Export as	RSS