Search:
Computing and Library Services - delivering an inspiring information environment

Items where Author is Iwnicki, Simon

Up a level
Export as [feed] RSS
Jump to: 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 1999
Number of items: 55.

2013

Dennis, Colin and Iwnicki, Simon (2013) Special Issue on RRUKA research. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 227 (6). p. 593. ISSN 0954-4097

Liang, Bo, Iwnicki, S. and Zhao, Y. (2013) Application of Power Spectrum, Cepstrum, Higher Order Spectrum and Neural Network Analyses for Induction Motor Fault Diagnosis. Mechanical Systems and Signal Processing, 39 (1-2). pp. 342-360. ISSN 0888-3270

Liang, Bo, Iwnicki, Simon and Zhao, Yunshi (2013) Application of power spectrum, cepstrum, higher order spectrum and neural network analyses for induction motor fault diagnosis. Mechanical Systems and Signal Processing, 39 (1-2). pp. 342-360. ISSN 0888-3270

Abobghala, Abdelmenem, Pislaru, Crinela and Iwnicki, S. (2013) Optimising the energy efficiency of rail vehicles by a novel application of integrated active control method for vehicle traction and steering systems. In: Next Generation Rail 2013, 15 - 16 July 2013, The Crystal, London.

Liang, Bo, Iwnicki, Simon, Zhao, Yunshi and Crosbee, David (2013) Railway wheel-flat and rail surface defect modelling and analysis by time–frequency techniques. Vehicle System Dynamics, 51 (9). pp. 1403-1421. ISSN 0042-3114

Liang, Bo, Iwnicki, Simon, Gao, Feng, Ball, Andrew, Tran, Van Tung and Cattley, Robert (2013) Railway Wheel Flat and Rail Surface Defect Detection by Time-frequency Analysis. Chemical Engineering Transactions, 33. pp. 745-750. ISSN 1974-9791

2012

Vollebregt, E. A.H., Iwnicki, S., Xie, G. and Shackleton, Philip (2012) Assessing the accuracy of different simplified frictional rolling contact algorithms. Vehicle System Dynamics, 50 (1). pp. 1-17. ISSN 1744-5159

Zhao, Y., Liang, Bo and Iwnicki, S. (2012) Estimation of the friction coefficient between wheel and rail surface using traction motor behaviour. Journal of Physics: Conference Series, 364. 012004. ISSN 1742-6596

2011

Ren, Z., Iwnicki, S. and Xie, G. (2011) A new method for determining wheel–rail multi-point contact. Vehicle System Dynamics, 49 (10). pp. 1533-1551. ISSN 0042-3114

Baeza, Luis, Vila, Paloma, Xie, G. and Iwnicki, S. (2011) Prediction of rail corrugation using a rotating flexible wheelset coupled with a flexible track model and a non-Hertzian/non-steady contact model. Journal of Sound and Vibration, 330 (18-19). pp. 4493-4507. ISSN 0022-460X

Bezin, Yann, Alonso, A., Zacher, M., Eickhoff, B., Xie, G. and Iwnicki, S. (2011) A study of the boundary conditions for the evaluation of railway track conicity. In: 22nd IAVSD Symposium, 14-19th August 2011, Manchester Metropolitan University. (Unpublished)

Ongaro, D., Xie, G., Iwnicki, S., Hemida, H. and Baker, C. (2011) Integration of crosswind forces into train dynamic modelling. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 225 (2). pp. 154-164. ISSN 0954-4097

Allen, Paul and Iwnicki, Simon (2011) The critical speed of a railway vehicle on a roller rig. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 215 (2). pp. 55-64. ISSN 0954-4097

Liang, Bo and Iwnicki, S. (2011) Independently Rotating Wheels with Induction Motors for High-Speed Trains. Journal of Control Science and Engineering, 2011. pp. 1-7. ISSN 1687-5249

2010

Persson, Ingemar, Nilsson, Rickard, Bik, Ulf, Lundgren, Magnus and Iwnicki, S. (2010) Use of a genetic algorithm to improve the rail profile on Stockholm underground. Vehicle System Dynamics, 48 (sup1). pp. 89-104. ISSN 0042-3114

Bezin, Yann, Farrington, D., Penny, C., Temple, B. and Iwnicki, S. (2010) The dynamic response of slab track constructions and their benefit with respect to conventional ballasted track. Vehicle System Dynamics, 48 (sup1). pp. 175-193. ISSN 0042-3114

Iwnicki, S., Ekh, M., Nielsen, J., Kassa, E. and Nicklisch, D. (2010) Geometry and stiffness optimization for switches and crossings, and simulation of material degradation. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 224 (4). pp. 279-292. ISSN 0954-4097

2009

Iwnicki, S. (2009) The Effect of Profiles on Wheel and Rail Damage. International Journal of Vehicle Structures & Systems, 1 (4). pp. 99-104. ISSN 0975-3060

Iwnicki, S. (2009) Future trends in railway engineering. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223 (12). pp. 2743-2750. ISSN 0954-4062

Evans, G., Shahzad, F., de Vries, E., Cavalletti, M., Iwnicki, S. and Bezin, Yann (2009) An investigation of sleeper voids using a flexible track model integrated with railway multi-body dynamics. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 223 (6). pp. 597-607. ISSN 0954-4097

Iwnicki, S., Bezin, Yann, Xie, G. and Kassa , E. (2009) Advances in vehicle-track interaction tools. Railway Gazette International. pp. 47-52.

Björklund, S., Enblom, R. and Iwnicki, S. (2009) Wheel-rail contact mechanics. In: Wheel-rail interface handbook. Woodhead, Cambridge. ISBN 978 1 84569 412 8

Iwnicki, S. (2009) The effect of profiles on wheel and rail damage. In: 2nd International Conference on Recent Advances in Railway Engineering (ICRARE-2009), Sep 27-28, 2009, Iran University of Science and Technology, Tehran, Iran. (Unpublished)

Xie, G., Iwnicki, S., Vila, P. and Baeza , L. (2009) An investigation of rail corrugation with a coupled, flexible, rotating wheelset, a flexible track and a non-steady contact model. In: CM2009 Conference proceedings. CM2009. ISBN 978-88-904370-0-7

Kassa, E., Iwnicki, Simon, Perez, J., Allen, Paul and Bezin, Yann (2009) Optimisation of track stiffness, track gauge and rail inclination along a turnout using a multibody simulation tool. In: 21st IAVSD Symposium on Dynamics of Vehicles on Roads and Tracks , August 17-21 2014, Stockholm, Sweden.

Bezin, Yann, Farrington, D., Davies, C., Penny, C., Temple, B., Kassa, E. and Iwnicki, S. (2009) The dynamic response of a slab track construction and its benefits with respect to conventional ballasted track. In: 21st international symposium on dynamics of vehicles on roads and tracks, 17-21st August 2009, Stockholm, Sweden. (Unpublished)

2008

Xie, G. and Iwnicki, S. (2008) Simulation of wear on a rough rail using a time-domain wheel–track interaction model. Wear, 265 (11-12). pp. 1572-1583. ISSN 00431648

Xie, G. and Iwnicki, S. (2008) Calculation of wear on a corrugated rail using a three-dimensional contact model. Wear, 265 (9-10). pp. 1238-1248. ISSN 0043-1648

Bezin, Yann, Iwnicki, S. and Cavalletti, M. (2008) The effect of dynamic rail roll on the wheel–rail contact conditions. Vehicle System Dynamics, 46 (sup1). pp. 107-117. ISSN 0042-3114

Baker , C. J., Bouferrouk, A., Perez , J. and Iwnicki, S. (2008) The integration of cross wind forces into train dynamic calculations. In: 8th World Congress on Railway Research (WCRR 2008), 18 - 22 May 2008, Seoul, Korea. (Unpublished)

Shackleton, Philip and Iwnicki, S. (2008) Comparison of wheel-rail contact codes for railway vehicle simulation: an introduction to the Manchester Contact Benchmark and initial results. Vehicle System Dynamics, 46 (1). pp. 129-149. ISSN 0042-3114

Xie, G. and Iwnicki, S. (2008) Simulations of roughness growth on rails – results from a 2D non-Hertzian, non-steady contact model. Vehicle System Dynamics, 46 (1-2). pp. 117-128. ISSN 0042-3114

2007

Xie, G. and Iwnicki, S. (2007) Simulations of roughness growth on rails: results from a 2D non-Hertzian and non-steady contact model. In: 9th International Workshop on Railway Noise, 04 - 08 Sep 2007, Munich, Germany. (Unpublished)

Liang, Bo and Iwnicki, S. (2007) An Experimental Study of Independently Rotating Wheels for Railway Vehicles. In: Proceedings of the 2007 IEEE International Conference on Mechatronics and Automation, August 5 - 8, 2007. IEEE.

Bezin, Yann, Iwnicki, S. and Cavalletti, M. (2007) The effect of dynamic roll on wheel rail contact conditions. In: 20th international symposium on dynamics of vehicles on roads and tracks, 13-17th August 2007, Berkeley, California. (Unpublished)

Hsu, S., Huang, Z., Iwnicki, S., Thompson, D., Jones, C., Xie, G. and Allen, Paul (2007) Experimental and theoretical investigation of railway wheel squeal. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 221 (1). pp. 59-73. ISSN 0954-4097

2006

Xie, G. and Iwnicki, S. (2006) Prediction of wear on a corrugated rail using a three-dimensional contact model. In: Proceedings of the 7th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. Institute of Materials Engineering . ISBN 1876855274

Thompson , D.J., Jones, C.J., Xie, G., Iwnicki, Simon, Allen, Paul and Hsu, S.S. (2006) Simulation of roughness initiation and growth on railway rails. Journal of Sound and Vibration, 293 (3-6). pp. 819-8209. ISSN 0022-460X

Sheng, X., Thompson, D.J., Jones, C.J.C., Xie, G., Iwnicki, S., Allen, Paul and Hsu, S.S. (2006) Simulations of roughness initiation and growth on railway rails. Journal of Sound and Vibration, 293 (3-5). pp. 819-829. ISSN 0022460X

Iwnicki, S. (2006) Introduction. In: Handbook of Railway Vehicle Dynamics. CRC Press, Abingdon, pp. 1-3. ISBN 9780849333217

Gualano, I., Iwnicki, S., ponnapalli, P.V.S and Allen, Paul (2006) Prediction of Wheel-Rail Forces, Derailment and Passenger Comfort using Artificial Neural Networks. In: Proceedings of the EURNEX-ZEL Conference, 30 - 31 May 2006, Zilina, Slovakia.

Allen, Paul and Iwnicki, Simon (2006) Scale testing. In: A Handbook of Railway Vehicle Dynamics. Taylor & Francis, Abingdon, UK, pp. 507-526. ISBN 978-0-8493-3321-7

Perez, J., Stow, Julian and Iwnicki, S. (2006) Application of active steering systems for the reduction of rolling contact fatigue on rails. Vehicle System Dynamics, 44 (sup1). pp. 730-740. ISSN 0042-3114

2005

Bezin, Yann, Cavalletti, M. and Iwnicki, S. (2005) Understanding the wheel-rail interface using an integrated flexible track simulation tool. In: MSC.Software 2005 Virtual Product Development Conference , October 24 - 26, 2005, Hilton Munich Park, Munich, Germany. (Unpublished)

Xie, G., Allen, Paul, Iwnicki, S., Alonso, A. and Thompson, D.J. (2005) The introduction of falling friction coefficients into curving calculations for studying curve squeal noise. In: XIX IAVSD Symposium International Association for Vehicle System Dynamics, 29th August-2nd September 2005, Milan, Italy.

Allen, Paul, Stow, Julian and Iwnicki, S. (2005) Wheel/rail interface issues. Journal of the the Permanent Way Institution, 123 (3). pp. 123-127.

2004

Sheng, X., Thompson, D.J., Jones, C.J.C., Xie, G., Iwnicki, S., Allen, Paul and Hsu, S.S. (2004) Simulation of roughness growth on railway rails. In: Proceedings of 8th International Workshop on Railway Noise, September 2004, Buxton, Derbyshire.

Liang, Bo, Iwnicki, S. and Swift, F. J. (2004) Independently Rotating Wheels With Induction Motors for High Speed Trains. In: Proceedings of ASME 7th Biennial Conference on Engineering Systems Design and Analysis. ESDA 2004, 2004 (4174X). ASME, Manchester, UK, pp. 21-26. ISBN 0-7918-4174-X

2003

Liang, Bo, Iwnicki, S. and Ball, Andrew (2003) Asymmetrical stator and rotor faulty detection using vibration, phase current and transient speed analysis. Mechanical Systems and Signal Processing, 17 (4). pp. 857-869. ISSN 0888-3270

2002

Liang, Bo, Payne, B.S., Ball, Andrew and Iwnicki, S. (2002) Simulation and fault detection of three-phase induction motors. Mathematics and Computers in Simulation, 61 (1). pp. 1-15. ISSN 0378-4754

Jaiswal, Jay, Blair, Stephen, Stevens, Andy, Kay, Tom, Iwnicki, S. and Bezin, Yann (2002) A systems approach to evaluating rail life. In: Railway Engineering Conference, 3-4th July 2002, London. (Unpublished)

2001

Bezin, Yann, Iwnicki, S., Stow, J., Blair, S. and Kay, T. (2001) Development of a method to predict stresses in rails using ADAMS/Rail and ABAQUS. In: 16th European ADAMS User Conference , November 14-15, 2001 , Berchtesgaden, Germany . (Unpublished)

Iwnicki, S. and Bezin, Yann (2001) Simulation as a tool for assessing the match between track and vehicle standards. In: Infrarail 2001: developments in the railway industry. ICE Publishing, pp. 19-23. ISBN 9780727742407

Bezin, Yann, Iwnicki, S. and Guerguil, N. (2001) Modelling leafspring suspensions for virtual acceptance test. In: 2nd international workshop on freight vehicle design, April 2001, Manchester UK. (Unpublished)

1999

Iwnicki, S. (1999) The Manchester Benchmarks for Rail Vehicle Simulation. Vehicle System Dynamics, 31 . Taylor & Francis, London, UK. ISBN 978-90-2651-551-4

This list was generated on Tue Oct 21 17:51:17 2014 IST.

University of Huddersfield, Queensgate, Huddersfield, HD1 3DH Copyright and Disclaimer All rights reserved ©