Zeng, Shengye, Blunt, Liam and Jiang, Xiang (2011) The application of Taguchi approach to optimise the processing conditions on bonnet polishing of CoCr. Key Engineering Materials, 496. pp. 235-240. ISSN 1013-9826
|PDF - Accepted Version |
Download (615kB) | Preview
This paper applied the Taguchi approach to investigate the effects of each polishing
parameter and obtain the optimal processing conditions for CoCr alloy polishing. The polishing medium was 1µm diamond paste with Microcloth(polishing cloth). Surface finish parameter Sa was chosen as criterion for optimization. The experimental result indicates that the optimal polishing condition for CoCr alloy polishing is 5deg of precess angle, 800 rpm of head speed, 0.2mm of tool offset and 1.5 bar of tool pressure. With this optimal condition, a confirmatory experiment was conducted. The surface roughness Sa reduced from initial 24nm to 7nm and reduction ratio was 72.5% which was very close to the estimated ratio 64%.
|Subjects:||T Technology > TJ Mechanical engineering and machinery|
T Technology > TS Manufactures
|Schools:||School of Computing and Engineering|
School of Computing and Engineering > Centre for Precision Technologies > Engineering Control and Machine Performance Research Group
|Depositing User:||Shengyue Zeng|
|Date Deposited:||04 Oct 2012 16:54|
|Last Modified:||11 Oct 2012 09:48|
Downloader CountriesMore statistics for this item...
Repository Staff Only: item control page