Items where Subject is "TL Motor vehicles. Aeronautics. Astronautics"

Article

Albarbar, A., Gu, Fengshou and Ball, Andrew (2010) Diesel engine fuel injection monitoring using acoustic measurements and independent component analysis. Measurement, 43 (10). pp. 1376-1386. ISSN 0263-2241

Albarbar, A., Gu, Fengshou, Ball, Andrew and Starr, A. (2010) Acoustic monitoring of engine fuel injection based on adaptive filtering techniques. Applied Acoustics, 71 (12). pp. 1132-1141. ISSN 0003-682X

Barrans, Simon, Khodabakhshi, G. and Xu, Qiang (2014) Contact Pressure Distribution in Joints Formed by V-Band Clamps. Advanced Materials Research, 1016. pp. 34-38. ISSN 1662-8985

Barrans, Simon, Khodabakhshi, Goodarz and Muller, Matthias (2014) Classical and numerical approaches to determining V-section band clamp axial stiffness. Open Engineering, 5 (1). pp. 99-110. ISSN 2391-5439

Barrans, Simon and Muller, Matthias (2009) Finite element prediction of the ultimate axial load capacity of V-section band clamps. Journal of Physics: conference series, 181. pp. 1-8. ISSN 1742-6596

Barrans, Simon, Waterworth, Adelle and Sahboun, Salahaddin (2014) Analysis of the Torsional Load Capacity of V-Section Band Clamps. Advanced Materials Research, 1016. pp. 59-64. ISSN 1662-8985

Bryant, David, Fieldhouse, John D. and Talbot, Chris J. (2011) Brake Judder - An Investigation of the Thermo-elastic and Thermo-plastic Effects during Braking. International Journal of Vehicle Structures & Systems, 3 (1). ISSN 0975-3060

Burdakov, Oleg, Doherty, Patrick, Holmberg, Kaj, Kvarnström, Jonas and Olsson, Per-Magnus (2010) Relay Positioning for Unmanned Aerial Vehicle Surveillance. The International Journal of Robotics Research, 29 (8). pp. 1069-1087. ISSN 0278-3649

Conte, Gianpaolo and Doherty, Patrick (2008) An Integrated UAV Navigation System Based on Aerial Image Matching. Proceedings of the 2008 IEEE Aerospace Conference, 2008. ISSN 1095-323X

Dai, Yang, Raeside, R. and Smyth, A. (2005) The use of load factors to segment airline operators. Journal of Revenue & Pricing Management, 4 (2). pp. 195-203. ISSN 1476-6930

Doherty, Patrick, Heintz, Fredrik and Kvarnström, Jonas (2013) High-Level Mission Specification and Planning for Collaborative Unmanned Aircraft Systems Using Delegation. Unmanned Systems, 1 (1). pp. 75-119. ISSN 2301-3850

Doherty, Patrick, Kvarnström, Jonas and Heintz, Fredrik (2009) A temporal logic-based planning and execution monitoring framework for unmanned aircraft systems. Autonomous Agents and Multi-Agent Systems, 19 (3). pp. 332-377. ISSN 1387-2532

Fieldhouse, John D. (1993) Putting the brakes on brake noise. Machine Design. p. 26. ISSN 0024-9114

Fieldhouse, John D. (1993) Vibrational characteristics of a squealing disc brake. Journal Mobility & Vehicles Mechanics, 19 (2). ISSN 1450 - 5304

Fieldhouse, John D., Ashraf, Naveed and Talbot, Chris J. (2009) The Measurement and Analysis of the Disc/Pad Interface Dynamic Centre of Pressure and its Influence on Brake Noise. SAE International Journal of Passenger Cars- Mechanical Systems, 1 (1). pp. 736-745. ISSN 1946-3995

Fieldhouse, John D., Ashraf, Naveed and Talbot, Chris J. (2008) The Measurement and Analysis of the Disc/Pad Interface Dynamic Centre of Pressure and its Influence on Brake Noise. SAE International Journal of Passenger Cars- Mechanical Systems, 1 (1). pp. 736-745. ISSN 1946-3995

Fieldhouse, John D., Ashraf, Naveed and Talbot, Chris J. (2009) Measurement of the dynamic centre of pressure of the disc/pad interface during a braking operation. International Journal of Vehicle Design, 51 (1/2). pp. 73-104. ISSN 0143-3369

Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2011) Hot Judder - An Investigation of the Thermo-Elastic and Thermo-Plastic Effects during Braking. SAE International Journal of Passenger Cars- Mechanical Systems, 4 (2). pp. 1086-1101. ISSN 1946-3995

Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2011) The Influence of Pad Abutment on the Generation of Brake Noise. International Journal of Vehicle Structures & Systems, 3 (1). ISSN 0975-3060

Fieldhouse, John D. and Steel, W.P (2003) A study of brake noise and the influence of the centre of pressure at the disc/pad interface, the coefficient of friction and calliper mounting geometry. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 217 (D11). pp. 957-973. ISSN 0954-4070

Fieldhouse, John D., Steel, William P. and Talbot, Chris J. (2008) The measurement of the absolute displacement of a noisy disc brake. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 222 (7). pp. 1121-1140. ISSN 0954-4070

Graham, Gary and Hardaker, Glenn (2001) Contractor Evaluation in the Aerospace Industry: Using the Evidential Reasoning Approach. Journal of research in marketing and entrepreneurship, 3 (3). pp. 162-173. ISSN 1471-5201

Gu, Fengshou and Ball, Andrew (1996) Diesel injector dynamic modelling and estimation of injection parameters from impact response Part 1: modelling and analysis of injector impacts. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 210 (44). pp. 293-302. ISSN 0954-4070

Gu, Fengshou, Ball, Andrew and Rao, K K (1996) Diesel injector dynamic modelling and estimation of injection parameters from impact response part 2: prediction of injection parameters from monitored vibration. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 210 (44). pp. 303-312. ISSN 0954-4070

Gu, Fengshou, Jacob, P J and Ball, Andrew (1999) Non-parametric models in the monitoring of engine performance and condition: Part 2: non-intrusive estimation of diesel engine cylinder pressure and its use in fault detection. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 213 (2). pp. 135-143. ISSN 0954-4070

Jackson, Frankie. F (2018) Aerodynamic optimisation of Formula student vehicle using computational fluid dynamics. Fields: journal of Huddersfield student research, 4 (1). ISSN 2057-0163

Jacob, P J, Gu, Fengshou and Ball, Andrew (1999) Non-parametric models in the monitoring of engine performance and condition: Part 1: modelling of non-linear engine processes. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 213 (1). pp. 73-81. ISSN 0954-4070

Jupp, Martyn, Campean, I.F and Travcenko, J (2013) Application of TRIZ to develop an in-service diagnostic system for a synchronous belt transmission for automotive application. Procedia CIRP, 11. pp. 114-119. ISSN 2212-8271

Lawrence, C., Marr, Norman E. and Prendergast, G.P. (1992) Country-of-Origin stereotyping: a case study in the New Zealand motor vehicle industry. Asia Pacific Journal of Marketing and Logistics, 4 (1). pp. 37-51. ISSN 1355-5855

Lee, Samuel Peter, Rezk, Ahmed, Jupp, Martyn and Nickson, Keith (2018) The influence of pulse shape on the performance of a mixed flow turbine for turbocharger applications. International Journal of Mechanical Engineering and Robotics Research, 7 (2). ISSN 2278-0149

Malviya, Vihar, Mishra, Rakesh and Fieldhouse, John D. (2009) CFD Investigation of a Novel Fuel-Saving Device for Articulated Tractor-Trailer Combinations. Engineering Applications of Computational Fluid Mechanics, 3 (4). pp. 587-607. ISSN 1994-2060

Malviya, Vihar, Mishra, Rakesh and Palmer, Edward (2010) CFD Investigation on 3-Dimensional Interference of a Five-Hole Probe in an Automotive Wheel Arch. Advances in Mechanical Engineering, 2010. pp. 1-19. ISSN 1687-8132

McCorry, Brian and Murray, Will (1993) Reducing commercial vehicle road accident costs. International Journal of Physical Distribution & Logistics Management, 23 (4). pp. 35-41. ISSN 0960-0035

Murray, Will and Whiteing, Tony (1995) Reducing commercial vehicle accidents through accident databases. Logistics information management, 8 (3). pp. 22-29. ISSN 0957-6053

Sharma, Sidharath, Jupp, Martyn, Barrans, Simon and Nickson, Keith (2017) The impact of housing features relative location on a turbocharger compressor flow. International Journal of Mechanical Engineering and Robotics Research, 6 (6). pp. 451-457. ISSN 2278-0149

Smith, Ann, Gu, Fengshou and Ball, Andrew (2015) "Selection of Input Parameters for Multivariate Classifiersin Proactive Machine Health Monitoring by Clustering Envelope Spectrum Harmonics". Applied Mechanics and Materials, 798. pp. 308-313. ISSN 1662-7482

Sophian, A., Tian, G.Y., Taylor, D. and Rudlin, J. (2002) Design of a pulsed eddy current sensor for detection of defects in aircraft lap-joints. Sensors and Actuators A Physical, 101 (1-2). pp. 92-98. ISSN 0924-4247

Sophian, Ali, Tian, Gui Yun, Taylor, D. and Rudlin, J. (2002) Design of a pulsed eddy current sensor for detection of defects in aircraft lap-joints. Sensors and Actuators A Physical, 101 (1-2). pp. 92-98. ISSN 0924-4247

Stetsyuk, V., Soulopoulos, N., Hardalupas, Y. and Taylor, A. M. K. P. (2015) Experimental assessment of presumed filtered density function models. Physics of Fluids, 27 (6). 065107. ISSN 1070-6631

Stetsyuk, V., Soulopoulos, N., Hardalupas, Y. and Taylor, A. M. K. P. (2016) Scalar dissipation rate statistics in turbulent swirling jets. Physics of Fluids, 28 (7). 075104. ISSN 1070-6631

Talbot, Chris J. and Fieldhouse, John D. (2003) Fourier analysis of holographic data from a noisy disc brake and its implication for modelling. Proceedings of the Institute of Mechanical Engineers Part D Automotive Engineering, 217. pp. 975-984. ISSN 0954-4070

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2014) Emission Characteristics of a CI Engine Running with a Range of Biodiesel Feedstocks. Energies, 7 (1). pp. 334-350. ISSN ISSN 1996-1073

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2014) NOx Emission Prediction Based on Measurement of in-Cylinder Pressure for CI Engine Running with Diesel and Biodiesel. International Journal of Automotive Engineering and Technologies, 3 (2). ISSN 2146-9067

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Powles, Nicholas (2010) Prediction Models for Density and Viscosity of Biodiesel and their Effects on Fuel Supply System in CI Engines. Renewable Energy, 35 (12). pp. 2752-2760. ISSN 0960-1481

Treetrong, Juggrapong, Sinha, Jyoti K., Gu, Fengshou and Ball, Andrew (2012) Parameter Estimation for Electric Motor Condition Monitoring. Advances in Vibration Engineering, 11 (1). pp. 75-84. ISSN 0972-5768

Van Gulijk, Coen and Hardijns, Wim (2015) De steile opmars van drones en de uitdagingen voor de politie. Cahier Politiestudies, 33. ISSN 1784-5300

Webber, C J S, Payne, B.S., Gu, Fengshou and Ball, Andrew (2003) Componential coding in the condition monitoring of electrical machines Part 1: principles and illustrations using simulated typical faults. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 217 (8). pp. 883-899. ISSN 09544062

Zhao, Yunshi and Liang, Bo (2013) Re-adhesion control for a railway single wheelset test rig based on the behaviour of the traction motor. Vehicle System Dynamics, 50 (8). pp. 1173-1185. ISSN 0042-3114

von Lunen, Alexander (2009) Review: "Werth, Karsten: Ersatzkrieg im Weltraum. Das US-Raumfahrtprogramm in der Öffentlichkeit der 1960er Jahre. Frankfurt: Campus, 2006.". Technikgeschichte, 76 (3). pp. 287-288. ISSN 0040-117X

Book Chapter

Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2009) Bearing fault diagnosis based on vibration signals. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 93-98. ISBN 9781862180857

Abuhabaya, Abdullah and Fieldhouse, John D. (2010) Variation of Engine Performance and Emissions using Ethanol Blends. In: Proceedings of the 14th International Conference on Machine Design and Production. The 14th International Conference on Machine Design and Production, Volume . Publisher UMTIK, The 14th International Conference on Machine Design and Production. Güzelyurt, Turkish Republic of Northern Cyprus. ISBN ISBN 978-975-429-282-4

Abuhabaya, Abdullah and Fieldhouse, John D. (2010) Variation of Engine Performance and Emissions using Ethanol Blends. In: Proceedings of the 36th MATADOR International Conference. Springer, London Dordrecht Heidelberg, New York., Manchester University, pp. 413-416. ISBN 978-1-84996-431-9

Abuhabaya, Abdullah, Fieldhouse, John D. and Brown, D.R. (2010) Evaluation of Properties and use of waste vegetable oil (WVO), pure vegetable oils and standard diesel as used in a compression ignition engine. In: Future Technologies in Computing and Engineering Annual Researchers' Conference (CEARC'10). The University of Huddersfield, University of Huddersfield, Computing and Engineering Annual Researchers’ Conference 2010, pp. 71-76. ISBN 9781862180932

Al-Ani, Mahir, Carter, J. and Jupp, Martyn (2016) Comparison of electromagnetic performance and power losses of a high-speed machine fed by PWM and PAM inverter strategies. In: 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016). Institution of Engineering and Technology (IET), p. 6. ISBN 978-1-78561-188-9

Al-Ani, Mahir and Jupp, Martyn (2016) Switched flux permanent magnet machine with segmanted magnets. In: 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016). UNSPECIFIED, 5 -5. ISBN 978-1-78561-188-9

Al-Arbi, Salem, Gu, Fengshou, Guan, Luyang and Ball, Andrew (2009) Remotely gear condition monitoring using traditional signal processing techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 111-117. ISBN 9781862180857

Algasim, Hamad and Fieldhouse, John D. (2010) Performance and emissions of compression ignition engines using waste cooked oil as fuel. In: Future Technologies in Computing and Engineering Annual Researchers' Conference (CEARC'10). The University of Huddersfield, Huddersfield, UK, pp. 65-70. ISBN 9781862180932

Alghadhi, Mosttafa, Ball, Andrew, Gu, Fengshou and Cattley, Robert (2013) Standard drive cycle recreation from general driving behaviour. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 100-105. ISBN 9781862181212

Ali, Ahmed and Barrans, Simon (2017) Empirical Method for Determining Axial Load Distribution in Joints Formed by V-Band Clamps. In: 8th International Conference on Mechanical and Aerospace Engineering - ICMAE 2017. IEEE, pp. 11-15. ISBN 978-1-5386-3306-9

Bryant, David, Crampton, Andrew, Fieldhouse, John D. and Talbot, Chris J. (2006) Discussion of characteristics of brake judder and the necessary data acquisition system for complete analysis. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Bryant, David, Fieldhouse, John D., Crampton, Andrew, Talbot, Chris J. and Layfield, Jonathan (2008) Thermal Brake Judder Investigations Using a High Speed Dynamometer. In: Brake Technology, 2008. SAE. ISBN 978-0-7680-2030-4

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2009) Detection of diesel engine valve clearance by acoustic emission. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 7-13. ISBN 9781862180857

Fieldhouse, John D. (1996) Drum brake noise - a theoretical and visual approach. In: Advances in automotive braking technology: design analysis and materials developments. Professional Engineering Publishing, London. ISBN 9781860580390

Fieldhouse, John D. (1999) Overview of disc and drum brake noise using holographic interferometery. In: Proceedings of Inter-Noise 99. Institute of Noise Control Engineering, pp. 745-750. ISBN 9780962207235

Fieldhouse, John D. and Ashraf, Naveed (2007) Observations of the disc/pad interface pressure distribution during variable braking conditions and its influence on brake noise. In: Proceedings of the XXVII. International µ Symposium 2007. VDI Reports Series . VDI Verlag GmbH. ISBN 9783183657124

Fieldhouse, John D., Ashraf, Naveed and Talbot, Chris J. (2008) The Measurement and Analysis of the Disc/Pad Interface Dynamic Centre of Pressure and its Influence on Brake Noise. In: Brake Technology. SAE Special Publication Papers (SP2188). SAE International, Warrendale, PA, USA. ISBN 9780768020304

Fieldhouse, John D. and Beveridge, Carl (2001) Noise Reduction of a Twin Calliper Disc Brake by Angular Positioning of the Callipers. In: INCE conference proceedings 2001. International Institute of Noise Control Engineering (INCE), pp. 1476-1479. ISBN 9080655430

Fieldhouse, John D. and Beveridge, Carl (2000) Noise investigation of a commercial disc brake. In: The International Conference on Brakes 2000. Professional Engineering, pp. 85-100. ISBN 9781860582615

Fieldhouse, John D. and Beveridge, Carl (2001) Visual noise investigation of a four piston opposed type calliper. In: Total vehicle technology. Professional engineering publishing, pp. 173-186. ISBN 1860583245

Fieldhouse, John D. and Beveridge, Carl (2001) An experimental investigation of hot judder. In: Proceedings of the 19th Annual Brake Colloquium and Exhibition. SAE International, pp. 85-94. ISBN 0-7680-0823-9

Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2011) Hot Judder - An Investigation of the Thermo-Elastic and Thermo-Plastic Effects during Braking. In: SAE 2011 Noise and Vibration Conference and Exhibition Proceedings. SAE. ISBN 978-0-7680-6433-9

Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2011) The Influence of Pad Abutment on Brake Noise Generation. In: SAE 2011 Noise and Vibration Conference and Exhibition Proceedings. SAE. ISBN 978-0-7680-6433-9

Fieldhouse, John D., Bryant, David and Talbot, Chris J. (2010) Investigation of brake squeal and the influence of the abutment faces. In: Proceedings of 6th European Conference on Braking, JEF 2010. European Conference on Braking . Groupement Regional Nord/Pas-de-Calais pour la Recherche dans les Transports, Universite de Lille 1, France, pp. 255-262.

Fieldhouse, John D. and Rennison, M. (1998) An investigation of low frequency drum brake noise. In: Proceedings of the 16th Annual SAE Brake Colloquium & Engineering Display. Society of Automotive Engineers, pp. 65-73. ISBN 0768002761

Fieldhouse, John D., Steel, William P. and Talbot, Chris J. (2006) Advances in Absolute Displacement Measurement of a Noisy Disc Brake. In: IMechE International Conference, Braking 2006, Advances in Vehicle Braking Technology. Professional Engineering Publishing, pp. 275-289. ISBN 085316245X

Fieldhouse, John D., Steel, William P., Talbot, Chris J. and Crampton, Andrew (2007) Measurement of absolute displacement of a twin calliper disc brake during noise. In: 10th EAEC European Automotive Congress (EAEC 2005). Curran Associates. ISBN 9781604236040

Fieldhouse, John D., Steel, William P., Talbot, Chris J. and Siddiqui, Mustakeem A. (2004) Brake noise reduction evaluation using rotor asymmetry. In: International conference : Braking 2004, vehicle braking and chassis control. Professional Engineering Publishing, pp. 209-224. ISBN 1860584640

Fieldhouse, John D., Talbot, Chris J., Steel, William P. and Crampton, Andrew (2003) The measurement of in-plane vibration characteristics of a noisy twin calliper disc brake. In: Inter-noise 2003. Internoise, pp. 135-142. ISBN 9788995218914

Gannon, Katy, Shogi, K., Kilcoyne, Susan H., Pirling, Thilo and Zhang, ShuYan (2016) An approach to turbine housing validation through the measurement of residual strains using neutron diffraction and operationally induced strains using high temperature strain gauges. In: The 12th International Conference on Turbochargers and Turbocharging. Institution of Mechanical Engineers, London, p. 143. ISBN 978-0-9572374-7-6

Ghosna, Fadi and Sibley, Martin J.N. (2007) Pulse position modulation coding schemes for optical intersatellite links. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-12.

Gilkes, Oliver S. and Mishra, Rakesh (2006) Comparison of passive and active methods for improving transient performance of turbocharged engine systems. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Gilkes, Oliver S., Mishra, Rakesh, Rao, H.V. and Fieldhouse, John D. (2007) Transient response of turbocharged diesel engine for transient operation using air injection assist system. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-7.

Jimoh, Falilat, Chrpa, Lukas, McCluskey, T.L. and Shah, Mohammad Munshi Shahin (2013) Towards Application of Automated Planning in Urban Traffic Control. In: 2013 16th International IEEE Conference on Intelligent Transportation Systems (ITSC 2013). Institute of Electrical and Electronics Engineers ( IEEE ), pp. 985-990. ISBN 9781479929139

Lee, Samuel Peter, Jupp, Martyn and Nickson, Ambrose (2016) The influence of secondary flow structures in a turbocharger turbine housing in steady state and pulsating flow conditions. In: 2016 7th International Conference on Mechanical and Aerospace Engineering (ICMAE). IEEE, pp. 154-159. ISBN 978-1467388290

Lee, Samuel Peter, Jupp, Martyn and Nickson, Ambrose (2016) The introduction of a tilted volute design for operation with a mixed flow turbine for turbocharger applications. In: 2016 7th International Conference on Mechanical and Aerospace Engineering (ICMAE). IEEE, pp. 165-170. ISBN 978-1467388290

Malviya, Vihar, Gundala, Naresh and Mishra, Rakesh (2009) Effect of cross wind on aerodynamic coefficients of ground vehicles. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 19-25. ISBN 9781862180857

Malviya, Vihar, Mishra, Rakesh and Fieldhouse, John D. (2008) Comparative computational analysis of drag-reducing devices for tractor-trailers. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 1-8. ISBN 978-1-86218-067-3

Malviya, Vihar, Mishra, Rakesh and Gundala, Naresh (2009) CFD-Based Modelling of the Variation of Aerodynamic Coefficients with Wind Angle. In: Proceeding of National Conference on Fluid Mechanics & Fluid Power 17-19 December 2009. College of Engineering Pune, Pune, India.

Malviya, Vihar, Mishra, Rakesh, Palmer, Edward and Majumdar, Bireswar (2007) Numerical analysis and optimisation of multi-hole pressure probe geometry. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-8.

Mian, Naeem S., Fletcher, Simon, Longstaff, Andrew P., Myers, Alan and Pislaru, Crinela (2009) Efficient offline thermal error modelling strategy for accurate thermal behaviour assessment of the machine tool. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 26-32. ISBN 9781862180857

Muhamedsalih, Hussam, Jiang, Xiang and Gao, F. (2009) Interferograms analysis for wavelength scanning interferometer using convolution and fourier transform. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 33-37. ISBN 9781862180857

Muller, M and Barrans, Simon (2009) Ultimate axial load capacity of v-band clamp joints. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 14-18. ISBN 9781862180857

Muller, Matthias and Barrans, Simon (2010) Impact of flange geometry on the ultimate axial load capacity of V-band clamps. In: Conference papers: 9th International Conference on Turbochargers and Turbocharging. Institution of Mechanical Engineers, London, pp. 183-192. ISBN 978-1-907599-15-6

Palmer, Edward and Fieldhouse, John D. (2007) Comparison of air flow and heat dissipation from the front brakes fitted to a high performance GT Car. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-8.

Palmer, Edward, Mishra, Rakesh and Fieldhouse, John D. (2006) Analysis of air flow and heat dissipation from a high performance passenger car front brake rotor. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2006: CEARC’06. University of Huddersfield, Huddersfield, pp. 1-6.

Rennison, M., Edwards, C. and Fieldhouse, John D. (1998) The principle of reverse engineering used to develop automatic holographic fringe analysis to further brake noise understanding. In: Proceedings of ISMA 23 Noise and Vibration Engineering. Katholieke Universiteit Leuven, pp. 865-872. ISBN 9789073802643

Shi, John Z., Legate, I., Gu, Fengshou, Fieldhouse, John D. and Ball, Andrew (2008) Model-based fault prediction of ABS system with vehicle stationary. In: Proceedings of the third world congress on engineering asset management and intelligent maintenance systems conference. Springer.

Steel, William P., Fieldhouse, John D., Talbot, Chris J. and Crampton, Andrew (2004) In-plane disc brake vibration measurement using holographic interferometry. In: Total Vehicle Technology: Finding the Radical, Implementing the Practical (3rd International Conference). Wiley, pp. 261-274. ISBN 9781860584602

Steel, William P., Fieldhouse, John D., Talbot, Chris J. and Crampton, Andrew (2004) In-plane vibration investigations of a noisy disc brake. In: Braking 2004: Vehicle Braking and Chassis Control. Wiley, pp. 103-112. ISBN 978-1-86058-464-0

Talbot, Chris J., Banawi, K.A. and Fieldhouse, John D. (2000) Generating 3-Dimensional animations of vehicle brake noise. In: Brake Colloquium and Engineering Display 2000 Proceedings. Society of Automotive Engineers (SAE), pp. 1-8. ISBN 9780768006452

Talbot, Chris J., Crampton, Andrew, Fieldhouse, John D. and Steel, William P. (2007) Mathematical modelling of brake noise vibrations using spectral methods. In: 22nd Imac Conference and Exposition 2004 (Imac Xxii). Curran Associates. ISBN 9781604238020

Talbot, Chris J. and Fieldhouse, John D. (2001) Analysis of data derived from a real disc brake system generating noise. In: Total vehicle technology. Professional engineering publishing, pp. 187-200. ISBN 1860583245

Talbot, Chris J. and Fieldhouse, John D. (2002) Graphic representation of disc brakes generating noise using data from laser holography. In: Vehicle Noise and Vibration. John Wiley and Sons, pp. 45-58. ISBN 9781860583865

Talbot, Chris J. and Fieldhouse, John D. (2000) Three dimensional animation of a disc brake system generating noise. In: Advances in physics, electronics and signal processing applications. World Scientific and Engineering Society Press, pp. 36-40. ISBN 9789608052178

Talbot, Chris J., Fieldhouse, John D., Steel, William P. and Crampton, Andrew (2003) Modelling in-plane and out-of-plane vibrations in disc brake squeal. In: Inter-noise 2003. Internoise, pp. 3003-3011. ISBN 9788995218914

Talbot, Chris J., Fieldhouse, John D., Steel, William P. and Crampton, Andrew (2004) Pseudo-spectral methods applied to the mathematical modelling of disc brake squeal. In: Braking 2004: Vehicle Braking and Chassis Control. Wiley, pp. 157-166. ISBN 978-1-86058-464-0

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Predicting specific gravity and viscosity of biodiesel fuels. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 38-44. ISBN 9781862180857

West, Margaret M. and McCluskey, T.L. (2000) The application of a machine learning tool to the validation of an air traffic control domain theory. In: Tools With Artificial Intelligence (ICTAI 2000) conference proceedings. IEEE, pp. 414-421. ISBN 0769509096

Whiteing, A.E., Coyle, Michael and Bamford, Colin (2002) Effective fuel management in road transport fleets. In: Transport Lessons from the Fuel Tax Protests of 2000. Ashgate Publishing, pp. 205-219. ISBN 9780754618447

Wilson, Kyle M., Bridges, Karl, Ward, Paul, Parkinson, Simon, Louw, Tyron and Cooney, Ryan (2017) Driver Interaction with a Traffic Light Assistant App: A Naturalistic Investigation. In: Contemporary Ergonomics & Human Factors 2017: Proceedings of the Annual Conference of the Chartered Institute of Ergonomics & Human Factors. CIEHF, Daventry, UK, pp. 143-150.

Zhang, Hongyu and Shi, John Z. (2009) Modelling for a Turbocharger in Rotordynamics. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 1-6. ISBN 9781862180857

von Lunen, Alexander (2008) Die Deutsche Forschungsanstalt für Segelflug. In: Ein Jahrhundert Luftfahrtgeschichte zwischen Tradition, Forschung und Landschaftsp ege. Der August-Euler-Flugplatz in Darmstadt/Griesheim. Wissenschaftliche Buchgesellschaft, Darmstadt, pp. 209-239. ISBN 9783534232048

Conference or Workshop Item

Abobghala, Abdelmenem, Pislaru, Crinela and Iwnicki, S. (2013) Optimising the energy efficiency of rail vehicles by a novel application of integrated active control method for vehicle traction and steering systems. In: Next Generation Rail 2013, 15 - 16 July 2013, The Crystal, London.

Abuhabaya, Abdullah and Fieldhouse, John D. (2010) Variation of Engine Performance and Emissions using Ethanol Blends. In: 36th International MATADOR Conference 2010, 14th - 16th July 2010, Manchester, UK. (Submitted)

Abuhabaya, Abdullah, Fieldhouse, John D. and Brown, D.R. (2010) Variation of Engineering Performance and Emissions using Biodiesel Fuels. In: 2nd International Conference on Nuclear and Renewable Energy Sources, 4th-7th July 2010, Ankara, Turkey.

Allport, John and Whelan, Chris (2017) Active charge air cooling. In: VTMS 13: Vehicle Thermal Management Systems Conference, 17-18 May 2017, London, UK. (Unpublished)

Alturbeh, Hamid and Whidborne, James F. (2014) Real-time obstacle collision avoidance for fixed wing aircraft using B-splines. In: UKACC International Conference on Control 2014, 9th - 11th July 2014, Loughborough, UK.

Ashraf, Naveed, Fieldhouse, John D. and Talbot, Chris J. (2005) A study of the interface pressure distribution between pad and rotor. In: Twelfth International Congress on Sound and Vibration, 11th - 14th July 2005, Lisbon, Portugal. (Unpublished)

Brown, L. and Blunt, Liam (2008) Surface Metrology for the Automotive Industry. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Bryant, David, Fieldhouse, John D., Ashraf, Naveed and Solms, Florian (2012) Investigation of brake pad vibration under dynamic squeal conditions. In: EuroBrake 2012, 16-18 April, Dresden, Germany.

Bryant, David, Fieldhouse, John D., Crampton, Andrew and Talbot, Chris J. (2008) Hot Judder Investigations Using a High Speed Brake Dynamometer. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Bryant, David, Solms, Florian, Fieldhouse, John D. and Ashraf, Naveed (2012) Investigation Of Brake Pad Vibration Under Dynamic Squeal Conditions. In: EuroBrake 2012, 16-18 April, Dresden, Germany.

Chakraborty, A., Mishra, Rakesh and Majumdar, B. (2007) A computational approach to analyze the flow pattern in a Y-Duct due to different manoeuvring conditions. In: International Aerospace CFD Conference, 18th-19th June, 2007, Paris, France.

Crampton, Andrew, Fieldhouse, John D., Talbot, Chris J. and Steel, William P. (2003) Modeling disc brake noise using spectral methods. In: 5th EUROMECH Solid Mechanics Conference, 17-22 August 2003, AUT, Thessaloniki, GREECE. (Unpublished)

Crua, C., Stetsyuk, V., de Sercey, G. and Turner, J. (2015) Droplet and liquid size measurements in the near-nozzle region. In: ECN4 Workshop, 5-6 Sept 2015, Kyoto University, Kyoto Japan.

Elamin, Fathi (2009) Fault Detection and Diagnosis in Diesel Engine Using Acoustic Emission (AE). In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2011) Diesel engine lubricating oil condition and performance monitoring using acoustic emission measurements. In: 24th International Congress on Condition Monitoring and Diagnostics Engineering Management (COMADEM 2011), 30th May - 1st June 2011, Stavanger, Norway. (Unpublished)

Elshanti, Ali, Shi, John Z., Badri, A, Gu, Fengshou and Ball, Andrew (2007) Model-based Fault Detection and Diagnosis of the Anti-lock Braking System. In: Second World Congress of Asset Management and the Fourth International Conference on Condition Monitoring (WCEAM), June 2007, Harrogate, UK.

Fieldhouse, John D. (1991) Disc Brake Noise - An Investigation Using Holographic Interferometry. In: Autotech 1991, November 1991, NEC Birmingham. (Unpublished)

Fieldhouse, John D. (2011) Experimental studies on the performance and emission of diesel engines fueled with waste cooking oil and its diesel blends. In: ICWEE 2011 : International Conference on Water, Energy and Environment, 21st -23rd December 2011, Phuket, Thailand. (Unpublished)

Fieldhouse, John D. (1995) Holographic and Analytical Techniques Applied to Drum Brake Squeal. In: 5th European Automotive Congress European Automobile Engineers Cooperation (EAEC) 1995: The European Automotive Industry meets the Challenges of the Year 2000, 21 - 23 June 1995, Strasbourg, France. (Unpublished)

Fieldhouse, John D. (1991) An Investigation Into Disc Brake Noise Using Holographic Interferometry. In: 3rd International Conference on Vehicle Dynamics and Powertrain Engineering: (EAEC) 1991, 11 - 13 June 1991, Strasbourg, France. (Unpublished)

Fieldhouse, John D. (1992) The Technique of Holographic Interferometry used to Investigate Disc Brake Noise. In: 25th Silver Jubilee International Symposium on Automotive Technology and Automation (ISATA) : "Laser Applications for the Automotive Industry, 1 - 5 June 1992, Florence, Italy. (Unpublished)

Fieldhouse, John D. (1993) The development of a visual recording process to aid the understanding of disc brake noise. In: 4th International EAEC Conference: Vehicle and Traffic Systems Technology, 16 - 18 June 1994, Strasbourg, France. (Unpublished)

Fieldhouse, John D. (2008) The education of automotive engineers to meet the global demands of the 21st century. In: SAE World Congress & Exhibition, 14-17 April 2008, Detroit USA.

Fieldhouse, John D. (1999) A proposal to predict the noise frequency of a disc brake based on the friction pair interface geometry. In: 17th Annual SAE Brake Colloquium and Engineering Display, 10-13 October 1999, Florida USA.

Fieldhouse, John D. and Beveridge, C. (2000) Low-frequency drum brake noise investigation using a 1/4 vehicle test rig. In: 18th SAE International Congress and Exposition, 6-9 March 2000, Detroit USA.

Fieldhouse, John D. and Beveridge, C. (2000) A visual experimental noise investigation of a twin calliper disc brake. In: 18th SAE Brake Colloquium and Engineering Display, 1-4 October 2000, San Diego USA.

Fieldhouse, John D. and Beveridge, Carl (2000) Comparison of disc and drum brake rotor mode movement. In: FISITA World Automotive Congress, 12-16 June 2000, Seoul, Korea.

Fieldhouse, John D. and Beveridge, Carl (2002) Experimental observations of hot judder. In: FISITA 2002 World Automotive Congress, 2nd-7th June 2002, Helsinki.

Fieldhouse, John D. and Beveridge, Carl (2001) Extending the Understanding of Brake Noise – An Investigation of a Noisy Twin Calliper Disc Brake. In: 8th European Automotive Congress European Automobile Engineers Cooperation (EAEC) 2001: Europe and the 2nd Century of Auto-Mobility, 18-20 June 2001, Bratislava, Slovakia.

Fieldhouse, John D. and Beveridge, Carl (2001) Investigation of Disc Brake Noise Using a Heretical Technique. In: 8th European Automotive Congress European Automobile Engineers Cooperation (EAEC) 2001: Europe and the 2nd Century of Auto-Mobility, 18-20 June 2001, Bratislava, Slovakia.

Fieldhouse, John D., Beveridge, Carl and Talbot, Chris J. (2002) Thermal and holographic investigations of a noisy commercial disc brake. In: FISITA 2002 World Automotive Congress, 2nd-7th June 2002, Helsinki.

Fieldhouse, John D., Beveridge, Carl and Talbot, Chris J. (2002) Visual noise investigation of a four piston opposed type Calliper Disc Brake using the technique of holographic interferometry. In: FISITA 2002 World Automotive Congress, 2nd-7th June 2002, Helsinki.

Fieldhouse, John D., Bryant, David, Crampton, Andrew, Talbot, Chris J. and Layfield, Jonathan (2008) A study of thermal judder on a laboratory dynamometer. In: SAE Brake Colloquium & Engineering Display, October 2008, San Antonio USA.

Gannon, Katy, Kilcoyne, Susan H., Shogi, K., Pirling, Thilo and Zhang, ShuYan (2015) Influence of residual stresses on thermo-mechanical fatigue in turbine housings. In: 8th International Conference on Mechanical Stress Evaluation by Neutron & Synchrotron Radiation, 30th September - 2nd October 2015, Grenoble, France. (Unpublished)

Gilkes, Oliver S., Mishra, Rakesh, Fieldhouse, John D. and Rao, H.V. (2008) Transient response of turbocharged diesel engine for transient operation using air injection assist system. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Gilkes, Oliver S., Mishra, Rakesh, Fieldhouse, John D. and Rao, Vasu (2007) Effectiveness of active and passive methods of improving transient response in turbocharged engine systems. In: 11th European Automotive Congress : Automobile for the future, 30 May - 1Sst June 2007, Budapest, Hungary. (Unpublished)

Goodland, J., Campean, I.F, Caunce, A., Victory, J.L. and Jupp, Martyn (2013) A Manufacturing Failure Mode Avoidance Framework for Aerospace Manufacturing. In: ASME 2013 International Mechanical Engineering Congress and Exposition, November 15–21, 2013, San Diego, California, USA.

Hardalupas, Y., Soulopoulos, N., Stetsyuk, V. and Taylor, A. M. K. P. (2012) Experimental Assessment of ‘subgrid’ scale Probability Density Function Models for Large Eddy Simulation. In: 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 9-12 July, 2012, Lisbon, Portugal.

Hardalupas, Y., Soulopoulos, N., Stetsyuk, V. and Taylor, A.M.K.P. (2012) Scalar dissipation statistics in turbulent swirling flows. In: Optical Diagnostics for Combustion Applications, 19th June 2012, Imperial College London, Engineering Department.

Herapath, Colin, Barrans, S M and Weston, W (2011) A Comparison of Design Methodologies for Journal Bearings under Pulsatile Loads. In: International Conference on Renewable Energies and Power Quality (ICREPQ'11), 13-15 April 2011, Las Palmas de Gran Canaria, Spain.

Jiang, J, Gennish, R., Gu, Fengshou, Ball, Andrew, Jiao, F, Tao, T, Li, X and Liu, K (2006) An Investigation of acoustic measurements in the exhaust system for diesel engine combustion monitoring. In: Structure health monitoring conference, 5-7 July 2006, Spain.

Jiang, Xiang, Gu, Fengshou and Ball, Andrew (2008) Automotive Diesel Engine Performance and Condition Monitoring using Downpipe Acoustic Waveform Analysis. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

Jimoh, Falilat, McCluskey, T.L, Chrpa, Lukas and Gregory, Peter (2012) Enabling Autonomic Properties in Road Transport System. In: 30th Workshop of the UK Planning And Scheduling Special Interest Group PLANSIG 2012, 13th and 14th of December 2012, Teeside University.

Lee, Samuel Peter, Jupp, Martyn, Nickson, Keith and Allport, John (2017) Analysis of a tilted turbine housing volute design under pulsating inlet conditions. In: ASME Turbo Expo: Turbomachinery Technical Conference & Exposition, 26-30 June 2017, Charlotte, North Carolina, USA.

Mansoor, Shahid (2009) An Investigation into Designing a Derivative Vehicle. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Palmer, Edward, Mishra, Rakesh, Bryant, David and Fieldhouse, John D. (2008) Analysis of air flow and heat dissipation from a high performance GT car front brake. In: SAE International Congress 2008, April 2008, Detroit USA.

Shi, John Z., Higson, Andrew, Kidd, Moray, Gu, Fengshou and Ball, Andrew (2007) Fault Signal Extraction Using Deviation Energy in Frequency Domain. In: Second World Congress on Engineering Asset Management and the Fourth International Conference on Condition Monitoring, 11-14 June 2007, Harrogate, UK.

Singh, D., Elamin, Fathi, Gu, Fengshou, Gilkes, Oliver S., Fieldhouse, John D., Jain, A.K., Singh, Nishan and Singal, S.K. (2010) Study of friction characteristics of a diesel engine running on different viscosity grade engine oils using conventional and acoustic emissions technique. In: 7th International Conference on Industrial Tribology (ICIT 2010), 2nd - 4th December 2010, Ranchi, India. (Unpublished)

Steel, William P., Fieldhouse, John D., Talbot, Chris J. and Crampton, Andrew (2004) Modelling 3D displacement in a disc brake rotor generating noise. In: FISITA 2004 World Automotive Congress, 23rd-27th May, 2004, Barcelona, Spain. (Unpublished)

Stetsyuk, V., Crua, C., Pearson, R. and Gold, M. (2014) Direct imaging of primary atomisation in the near-nozzle region of diesel sprays. In: The Universities Internal Combustion Engine Group (UnICEG) meeting, 17th September 2014, University of Nottingham. (Submitted)

Stetsyuk, Viacheslav, Crua, C, Pearson, R and Gold, M (2014) Direct imaging of primary atomisation in the near-nozzle region of diesel sprays. In: 26th ILASS-Europe 2014, 8-10 Sep. 2014, Bremen, Germany.

Stetsyuk, V., Crua, C., de Sercey, G. and Turner, J. (2015) Experimental study of primary atomisation in the near-nozzle region of diesel fuel sprays. In: Jets and Vortex rings, 14 July 2015, University of Brighton. (Unpublished)

Stetsyuk, V., Crua, C., de Sercey, G. and Turner, J. (2015) Measurement of droplet sizes in the near-nozzle region of an ECN Spray A injector. In: Optical Diagnostics and Sensors applied to IC Engines (UnICEG meeting), 23rd September 2015, University of Oxford. (Submitted)

Stetsyuk, V., Hardalupas, Y. and Taylor, A. M. K. P. (2013) Experimental Study of flow and Scalar Mixing in Swirl-stabilised burners. In: Current Research in Combustion: A Forum for Research Students and Early Career Researchers, 24th September 2013, Loughborough University, Leicestershire, UK. (Submitted)

Stetsyuk, V., Soulopoulos, N., Hardalupas, Y. and Taylor, A. M. K. P. (2013) Rayleigh scattering temperature measurements in a swirl stabilized burner. In: European Combustion Meeting 2013, 25th - 28th June 2013, Lund University, Sweden.

Stetsyuk, V., Soulopoulos, N., Hardalupas, Y. and Taylor, A.M.K.P. (2014) Thermal dissipation rate measurements in swirl-stabilised flames. In: Combustion Research and Applications – State of the Art, 24th September 2014, Imperial College London, Engineering Department.

Stetsyuk, V., Turner, J.E., Crua, C., Pearson, R. and Gold, M. (2015) Droplet size and morphology characterization for diesel sprays under atmospheric operating conditions. In: 13th Triennial International Conference on Liquid Atomization and Spray Systems, 23-27 August 2015, Tainan, Taiwan.

Talbot, Chris J. and Fieldhouse, John D. (2001) Graphical and Mathematical Representations of a Real Brake System. In: 8th European Automotive Congress European Automobile Engineers Cooperation (EAEC) 2001: Europe and the 2nd Century of Auto-Mobility, 18-20 June 2001, Bratislava, Slovakia.

Talbot, Chris J. and Fieldhouse, John D. (2002) Investigations of In-Plane Disc Vibration Using Laser Holography. In: 20th Annual Brake Colloquium And Exhibition, October 2002, Phoenix, AZ, USA.

Talbot, Chris J., Fieldhouse, John D. and Bryant, David (2010) An investigation of frictional vibration between pad and calliper in the generation of disk brake squeal. In: INTER-NOISE 2010, the 39th International Congress and Exposition on Noise Control Engineering, 13-16 June 2010, Lisbon, Portugal. (Unpublished)

Taylor, Andrew and Unver, Ertu (2015) 3D Printing our future: Now. In: 3M: IMI Workshop In collaboration With EOS, Renishaw & HK 3D Printing, 17th March 2015, 3M Buckley Innovation Centre. (Unpublished)

Taylor, Andrew, Unver, Ertu and Ball, Andrew (2016) Interdisciplinary 3d Mobile Scanning Technology Case Studies: Canvasman, Faro, Artec & Structure Sensor For Ipad. In: School of Art, Design & Architecture Research Conference 2016, 14th January 2016, University of Huddersfield.

Tesfa, Belachew, Gu, Fengshou, Mishra, Rakesh and Ball, Andrew (2013) Emission Characteristics of CI Engine Running with Biodiesel. In: World Congress on Petrochemistry and Chemical Engineering, 18th - 20th November 2013, San Antonio, Texas, USA. (Unpublished)

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Fieldhouse, John D. (2009) Investigation Of Transient Characteristics For Performance Improvement And Health Monitoring For a CI Engine Running Biodiesel. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

Turner, J.E., Stetsyuk, V., Crua, C., Pearson, R.J. and Gold, M.R. (2015) The effect of operating conditions on post-injection fuel discharge in an optical engine. In: 13th Triennial International Conference on Liquid Atomization and Spray Systems, 23rd - 27th August 2015, Tainan, Taiwan.

Turner, Jack, Sykes, Dan, De Sercey, Guillaume, Stetsyuk, V., Gold, Martin, Pearson, Richard and Crua, Cyril (2017) A quantitative analysis of nozzle surface-bound fuel for diesel injectors. In: ILASS2017 - 28th European Conference on Liquid Atomization and Spray, 6-8 September 2017, Polytechnic University of Valencia.

Thesis

Abdulwahab, Abubaker (2018) Investigations on the Roll Stability of a Semitrailer Vehicle Subjected to Gusty Crosswind Aerodynamic Forces. Doctoral thesis, University of Huddersfield.

Al-Arbi, Salem (2012) Condition Monitoring of Gear Systems using Vibration Analysis. Doctoral thesis, University of Huddersfield.

Alqatawneh, Omayma (2021) Design Fiction as an Approach to Stimulate the Adoption of Self-Driving Cars. Doctoral thesis, University of Huddersfield.

Bashee, Firas (2017) Effecting Supply Chain Performance Through Cost Management: the Role of Ambidextrous Governance, Information System Integration and Absorptive Capacity. Doctoral thesis, University of Huddersfield.

Bryant, David (2010) Thermo-elastic Deformation of a Vented Brake Disc. Doctoral thesis, University of Huddersfield.

Fish, Michael Anderson (1998) Transmission errors in precision worm gear drives. Doctoral thesis, University of Huddersfield.

Gannon, Kathryn (2019) An investigation of residual and thermomechanical stress and strain in the turbine housing of a turbocharger. Doctoral thesis, University of Huddersfield.

Ismail, Hasan (2021) Accuracy improvement to low-cost air quality monitoring devices to enable their use in traffic management. Masters thesis, University of Huddersfield.

Khin, Zu Thane Mwae (2020) Investigation into the use of High Temperature Impact Resistant Polymers for Turbocharger Compressor Covers. Masters thesis, University of Huddersfield.

Mallin, Levi (2022) Mechanical Design of Permanent Magnet Rotors for High-Speed Electric Machines. Doctoral thesis, University of Huddersfield.

Malviya, Vihar (2011) Effects of a Novel Aerodynamic Intervention for Heavy Commercial Vehicles on Fuel Saving and Stability. Doctoral thesis, University of Huddersfield.

Needham, Paul M. (2008) Design for manufacture: a methodology to evaluate an aircraft design in order to ensure its manufacturability. Doctoral thesis, University of Huddersfield.

Perera, Guruge Elmo Lakshman (1988) A vertical axis wind turbine generator based on the tangential wall-jet action. Doctoral thesis, University of Huddersfield.

Retzer, Hermann (2018) Investigation of driver comfort and safety perception at different fallback levels of conventional and by-wire automotive brake systems. Doctoral thesis, University of Huddersfield.

Selig, Michael (2014) The Influence of Internal Tyre Pressure on Road Friction. Doctoral thesis, University of Huddersfield.

Sendanayake Achchige, Isuru (2018) Novel Geometric Modelling and Aerodynamic Characterisation Methodology for Truck-Trailer Vehicles. Doctoral thesis, School of Computing and Engineering.

Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.

Singh, Devendra (2011) Investigating the Effect of Engine Lubricant Viscosity on Engine Friction and Fuel Economy of a Diesel Engine. Masters thesis, University of Huddersfield.

Stetsyuk, V. (2014) Experimental study of combustion and scalar mixing in swirling jet flows. Doctoral thesis, Imperial College London.

Stetsyuk, V. (2009) Preliminary Analysis of Flameless Oxidation Combustion. Masters thesis, Technion – Israel Institute of Technology.

Tesfa, Belachew Chekene (2011) Investigations into the Performance and Emission Characteristics of a Biodiesel Fuelled CI Engine under Steady and Transient Operating Conditions. Doctoral thesis, University of Huddersfield.

Verma, Shrey (2022) Generating Synthetic Automotive Data and Detecting Abnormal Vehicle Behavior Using Unsupervised Machine Learning. Masters thesis, University of Huddersfield.

Zheng, Lin (2014) Model-based Condition Monitoring of Anti-lock Braking Systems. Doctoral thesis, University of Huddersfield.

von Lunen, Alexander (2010) Under the waves, above the clouds: A history of the pressure suit. Doctoral thesis, Technische Universität Darmstadt.

Patent

Kidd, Moray and Shi, John Z. (2008) Signal detection. WO2008139134.

Web page

von Lunen, Alexander (2009) German Aeromedicine Database. [Web page]