|You are here: Uni home page »|
|Up a level|
Argakiotis, C, Mishra, Rakesh, Stubbs, Christopher and Weston, Bill (2014) The Effect of using an Ethanol blended fuel on Emissions in an SI Engine. Renewable Energy and Power Quality Journal (12). ISSN 2172-038 X (In Press)
Kinnear, D., Mishra, Rakesh, Weston, Bill and Padgett, C. (2010) A Design Methodology for the Prediction of Squeeze Film Stiffness and Damping Characteristics in Hybrid Journal Bearings under Pulsatile Load Conditions. International Conference on Renewable Energies and Power Quality (ICREPQ’10) Granada (Spain), 23rd to 25th March, 2010.
Barrans, Simon and Weston, William (2004) Technical Application Series. A strain data acquisition system suitable for remote applications. Experimental Techniques, 28 (3). pp. 68-71. ISSN 0732-8818
Mavromihales, Mike, Mason, J. and Weston, Bill (2003) A case of reverse engineering for the manufacture of wide chord fan blades (WCFB) used in Rolls Royce aero engines. Journal of Materials Processing Technology, 134 (3). pp. 279-286. ISSN 0924-0136
Weston, William, Mavromihales, Mike and Mason, J. (2002) A Reverse Engineering application for improved manufacture of Wide Chord fan blades (WCFB) used in aero engines. International Journal of Engineering Simulation, 3 (2). pp. 3-8. ISSN 1468-1137
Banieghbal, M.R., Weston, William and Pountney, D.C. (1989) A numerical study of turbulent flow characteristics of servo‐valve orifices. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power Engineering 1989 (vol 203), 203 (21). pp. 139-147. ISSN 0954-4046
Rowe, W. Brian, Xu, S.X., Chong, F.S. and Weston, William (1982) Hybrid journal bearings with particular reference to hole-entry configurations. Tribology International, 15 (6). pp. 339-348. ISSN 0301-679X
Weston, William, Lalor, Michael J. and Rees Jones, J. (1979) Optimal design of an electro-hydraulic flow control system using laser velocimeter feedback. ISA Transactions, 18 (3). pp. 89-99. ISSN 0019-0578
Weston, William and Lalor, Michael J. (1979) Determination of the dynamic flow characteristics of an electro-hydraulic servo-valve using a laser velocimeter. Journal of Physics D: Applied Physics, 12 (2). pp. 203-218. ISSN 0022-3727
Lalor, Michael J. and Weston, William (1976) An inexpensive laser anemometer. Physics Education, 11 (6). pp. 425-427. ISSN 0031-9120
Arundel, P.A., Hobson, C.A., Lalor, Michael J. and Weston, William (1974) Measurements of individual alumina particle velocities and the relative slip of different-sized particles in a vertical gas - solid suspension flow using a laser - anemometer system. Journal of Physics D: Applied Physics, 7 (16). pp. 2288-2300. ISSN 0022-3727
Weston, William and Lalor, Michael J. (1972) Laser velocimeter gives precise valve calibration. Design Engineering. pp. 62-65. ISSN 0308-8448
Weston, William, Lalor, Michael J. and Cleaver, J.W. (1972) Pulsatile flow measurement in hydraulic systems using a laser velocimeter. Opto-electronics, 4 (4). pp. 417-427. ISSN 0306-8919
Weston, William and Lalor, Michael J. (1972) Laser velocimeter boosts reliability of hydraulic servos. Design Engineering. pp. 50-51. ISSN 0308-8448
Kelly, P.F. and Weston, William (1996) A Core Curriculum for the Education of Manufacturing Engineers for the 21st Century - The Conflict between Breadth and Depth. Technical Report. SME.
Hudson, Scott, Stubbs, Chris and Weston, William (2012) The Effect on Emissions of using Alternative Fuels in Turbo-Charged Diesel Engines. In: International Conference on Renewable Energies and Power Quality (ICREPQ'12), 28th - 30th March 2012, Santiago de Compostela, Galicia.
Herapath, Colin, Barrans, S M and Weston, W (2011) A Comparison of Design Methodologies for Journal Bearings under Pulsatile Loads. In: International Conference on Renewable Energies and Power Quality (ICREPQ'11), 13-15 April 2011, Las Palmas de Gran Canaria, Spain.