|You are here: Uni home page »|
|Up a level|
Ousey, Karen, Atkinson, Ross, Fleming, Leigh and Conway, Barbara R (2013) Academia and clinical practice – working together successfully to develop skin integrity knowledge and skills. Journal of Community Nursing, 27 (1). ISSN 0140-0908
Zhang, Hongyu, Blunt, Liam, Jiang, Xiang, Fleming, Leigh and Barrans, Simon (2012) The influence of bone cement type on production of fretting wear on the femoral stem surface: A preliminary study. Clinical Biomechanics, 27 (7). pp. 666-672. ISSN 0268-0033
Blunt, Liam, Zhang, Hongyu, Barrans, Simon, Jiang, Xiang and Brown, Leigh (2008) What results in fretting wear on polished femoral stems. Tribology International. ISSN 0301-679X
Zhang, Hongyu, Brown, Leigh and Blunt, Liam (2008) Static shear strength between polished stem and seven commercial acrylic bone cements. Journal of Materials Science Materials in Medicine, 19 (2). pp. 591-599. ISSN 0957-4530
Zhang, Hongyu, Blunt, Liam, Jiang, Xiang, Brown, Leigh, Barrans, Simon and Zhao, Y. (2008) Femoral stem wear in cemented total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 222 (5). pp. 583-592. ISSN 0954-4119
Zhang, Hongyu, Brown, Leigh, Blunt, Liam, Jiang, Xiang and Barrans, Simon (2008) Understanding initiation and propagation of fretting wear on the femoral stem in total hip replacement. Wear, 266 (5-6). pp. 566-569. ISSN 0043-1648
Zhang, Hongyu, Brown, Leigh, Blunt, Liam and Barrans, Simon (2008) Influence of femoral stem surface finish on the apparent static shear strength at the stem–cement interface. Journal of Mechanical Behaviour of Biomedical Materials, 1 (1). pp. 96-104. ISSN 1751-6161
Brown, Leigh, Zhang, H., Blunt, Liam and Barrans, Simon (2007) Reproduction of fretting wear at the stem—cement interface in total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 221 (8). pp. 963-971. ISSN 0954-4119
Elrawemi, Mohamed, Blunt, Liam, Fleming, Leigh, Sweeney, Francis and Robbins, David (2013) Defect Detection in Thin-film Photovoltaics; Towards Improved Efficiency and Longevity. In: International Conference on Renewable Energy – Towards Sustainable Energy from the Desert , 28-30 September 2013, Tripoli- Libya. (Submitted)
Joyce, N.J., Fleming, Leigh, Sisodia, Gurudatt, Elnaggar, Mohamed, Chakrabarty, Guatam and Blunt, Liam (2012) Does cementing the tibial keel and peg in a knee replacement affect the pull out strength of the tibial component from the bone - A biomedical study of two cementation techniques. In: EFORT Congress 2012, 23 - 25 May 2012, Berlin. (Unpublished)
Zhang, Hongyu, Brown, Leigh, Blunt, Liam and Barrans, Simon (2008) An investigation on generation of debris at the stem cement interface. In: 8th World Biomaterials Congress, 28th May -1st June 2008, Amsterdam, The Netherlands. (Unpublished)
Zhang, Hongyu, Brown, Leigh and Blunt, Liam (2007) A better understanding of the surface topography at the stem-cement interface. In: ASME/STLE International Joint Tribology Conference, 22nd-24th October 2007, San Diego, California, USA.
Brown, Leigh (2006) The use of 3D surface analysis techniques to investigate the wear of matt surface finish femoral stems in total hip replacement. Doctoral thesis, University of Huddersfield.