Müller, M. and Blunt, Liam (2009) Predicting The Axial Load Of Capacity Of Joints Formed By V-Band Retainers. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield. (Unpublished)

V-band retainers are widely used in the automotive, aircraft and
aerospace industries to connect a pair of circular flanges to provide a joint
with good axial strength and torsional rigidity. V-band retainers are
manufactured using a cold rolling process. Despite their wide application,
once assembled to a pair of flanges little is known about the interaction
between flange and band. Moreover the failure mode of V-band clamps
when applying an axial load is not fully understood.

Predicting_The_Axial_Load_Of_Capacity_Of_Joints_Formed_By_V-Band_Reatainers_-_M_Muller.pdf - Accepted Version

Download (1MB) | Preview


Downloads per month over past year

Add to AnyAdd to TwitterAdd to FacebookAdd to LinkedinAdd to PinterestAdd to Email