Holroyd, Geoffrey, Pislaru, Crinela and Ford, Derek G. (2003) Determination of stiffness and damping sensitivity for computer numerically controlled machine tool drives. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217 (10). pp. 1165-1177. ISSN 0954-4062
![]() |
PDF
- Published Version
Restricted to Registered users only Download (685kB) |
Abstract
A generalized eigenvalue method is used to determine the undamped and damped natural
frequencies, coefŽ cients of damping and mode shapes of a computer numerically controlled (CNC)
machine tool drive. The calculated results compare well with the measured results obtained by using
vibration analysis equipment. Then the sensitivity of the various modes to changes in the stiffness and
damping characteristics of the machine drives is estimated. These values prove to be useful in
adjusting the parameters of a hybrid model for a CNC machine tool axis drive in order to alter the
simulated results in accordance with the measured results.
Item Type: | Article |
---|---|
Additional Information: | UoA 25 (General Engineering) © IMechE 2003 |
Subjects: | T Technology > TJ Mechanical engineering and machinery |
Schools: | School of Computing and Engineering School of Computing and Engineering > Centre for Precision Technologies School of Computing and Engineering > Centre for Precision Technologies > Engineering Control and Machine Performance Research Group School of Computing and Engineering > Pedagogical Research Group School of Computing and Engineering > Diagnostic Engineering Research Centre School of Computing and Engineering > Diagnostic Engineering Research Centre > Energy, Emissions and the Environment Research Group School of Computing and Engineering > Diagnostic Engineering Research Centre > Measurement System and Signal Processing Research Group |
Related URLs: | |
References: | 1 Erkorkmaz, K. and Altintas, Y. High speed CNC system design. Part II: modelling and identiŽ cation of feed drives. Int. J. Mach. Tools Mf., August 2001, 41(10), 1487–1509. 2 Pislaru, C., Ford, D. G. and Freeman, J. M. A new approach to the modelling and simulation of a CNC machine tool axis drive. In Proceedings of the Fourth International Conference on Laser Metrology and Machine Performance (LAMDAMAP ’99), Longhirst Hall, Northumberland, July 1999, pp. 335–343. 3 Pislaru, C., Ford, D. G. and Freeman J. M. Dynamic simulation of CNC machine tool axis drives. In International Conference PCIM ’99, Intelligent Motion Section, Nuremberg, Germany, 22–24 June 1999. 4 Pislaru, C., Ford, D. G. and Freeman, J. M. A new 3D model for evaluating the performance of CNC machine tool axis drives. In First International Conference of the European Society for Precision Engineering and Nano- G HOLROYD, 1176 C PISLARU AND D G FORD Proc. Instn Mech. Engrs Vol. 217 Part C: J. Mechanical Engineering Science C10502 # IMechE 2003 technology (EUSPEN), Bremen, Germany, 31 May–4 June 1999, pp. 72–75. 5 Blake, M. D., Ford, D. G. and Morton D. Modelling and simulation of CNC machine tool axis drives. In Proceedings of the 10th International Conference on Systems Engineering, Coventry University, September 1994, Vol. 1, pp. 103–110. 6 De Silva, C. W. Vibration—Fundamentals and Practice, 1999, pp. 349–398 (CRC Press, Boca Raton, Florida). 7 Pestel, C. E. and Leckie, F. A. Matrix Methods in Elastomechanics, 1963 (McGraw-Hill, New York). 8 Holroyd, G., Pislaru, C. and Ford, D. G. IdentiŽ cation of damping elements in a CNC machine tool drive. In Proceedings of 5th International Conference on Laser Technology, Machine Tool, CMM and Robot Performance (LAMDAMAP 2001), Birmingham, July 2001, pp. 289–299 (WIT Press, Southampton). 9 Pislaru, C. Parameter identiŽ cation and hybrid mathematical modelling techniques applied to non-linear control systems. PhD thesis, The University of HuddersŽ eld, 2001. 10 Adhikari, S. Calculation of derivative of complex modes using classical normal modes. Computers and Structs, 15 August 2000, 77(6), 625–630. 11 Nelson, R. B. SimpliŽ ed calculation of eigenvector derivatives. Am. Inst. Aeronaut. Astronaut. J., 1976, 14(9), 1201– 1205. 12 Adelman, H. M. and Haftka, R. T. Sensitivity analysis of discrete structural system. Am. Inst. Aeronaut. Astronaut., 1986, 24(5), 823–832. 13 Murthy, D. V. and Haftka, R. T. Derivatives of eigenvalues and eigenvectors of a general complex matrix. Int. J. Numer. Meth. Engng, 1988, 26, 293–311. 14 Zeng, Q. H. Highly accurate modal method for calculating eigenvector derivatives in viscous damping systems. Am. Inst. Aeronaut. Astronaut. J., 1995, 33(4), 746–751. 15 Cronin, D. L. Eigenvalue and eigenvector determination for non-classically damped dynamic systems. Computers and Structs, 1990, 36(1), 133–138. 16 Woodhouse, J. Linear damping models for structural vibration. J. Sound Vibr., 1998, 215(3), 547–569. 17 Harris, C. M. Shock and Vibration Handbook, 3rd edition, 1985 (McGraw-Hill, New York). 18 Quayle, J. P. Kempe’s Engineers’ Y ear Book, 89th edition, 1984, pp. A2/37–38 (Morgan Grampian, London). 19 James, M. L., Smith, G. M., Wolford, J. C. and Whaley, P. W. Vibration of Mechanical and Structural Systems: With Microcomputer Applications, 1989 (Harper and Row, New York). 20 Newland, D. E. Mechanical Vibration Analysis and Computation, 1989 (Longman ScientiŽ c and Technical, Harlow). 21 Press, W. H., Teukolsky, S. A., Vetterling, W. T. and Flannery, B. P. Numerical Recipes in C—The Art of ScientiŽ c Computing, 1992 (Cambridge University Press). 22 Gourlay, A. R. and Watson, G. A. Computational Methods for Matrix Eigenproblems, 1973 (John Wiley, Chichester). 23 Wilkinson, M. A. The Algebraic Eigenvalue Problem, 1965 (Clarendon Press, Oxford). |
Depositing User: | Briony Heyhoe |
Date Deposited: | 24 Jul 2007 |
Last Modified: | 28 Aug 2021 23:32 |
URI: | http://eprints.hud.ac.uk/id/eprint/309 |
Downloads
Downloads per month over past year
Repository Staff Only: item control page
![]() |
View Item |