Search:
Computing and Library Services - delivering an inspiring information environment

Assessing the wear of the modular taper interface in retrieved metal-on-metal hip replacements

Bills, Paul J., Racasan, Radu, Tessier, P and Blunt, Liam (2013) Assessing the wear of the modular taper interface in retrieved metal-on-metal hip replacements. In: 14th International Conference on Metrology and Properties of Engineering Surfaces (Met & Props 2013), June 17-21, 2013, Taipei, Taiwan. (Unpublished)

[img] Microsoft Word (Conference Abstract) - Submitted Version
Download (15kB)

Abstract

Measuring the amount of wear in the case of revised hip replacements is considered to be a prerequisite of understanding and assessing true in vivo performance of the implant. Whilst most case studies have been focused on developing methods for measuring wear on the bearing surface an increased revision rate of LHMOM implants compared to resurfacing suggests that all interfaces have to assessed to evaluate overall wear. This paper describes the main characteristics of a method developed by the authors for quantifying taper wear as well as general taper interface parameters.
Previous studies have mostly relied on visual inspection to assess the wear of the taper interface. The method aims at characterizing any surface and form changes caused by the wear process through the use of a roundness measurement machine. The measurement process enables a full 360 degree scan on the taper surface using a diamond tip stylus. Wear is determined by analyzing the data through a custom developed Matlab program. Along with assessing the volumetric wear linear wear and contact parameters can also be determined.
The method was applied to 100 retrieved LHMOM femoral head components in order to quantify the wear at the taper junction. Initial results show that the taper interface is a contributing factor to overall wear with a wear volumes ranging from 0.2 to 25 mm3. The wear on the femoral heads can mostly be characterized as a localized area covering the whole contact length between the stem and the femoral head. Maximum linear depth is mostly present in the distal end of the femoral head. In some cases wear is only present on one half of the contact length suggesting unilateral loading. The results suggest the geometric form errors between components are one of the contributing factors of wear at the taper interface.

Item Type: Conference or Workshop Item (Paper)
Subjects: Q Science > QC Physics
T Technology > TJ Mechanical engineering and machinery
Schools: School of Computing and Engineering > Centre for Precision Technologies > EPSRC Centre for Innovative Manufacturing in Advanced Metrology
School of Computing and Engineering > Centre for Precision Technologies > Surface Metrology Group
Related URLs:
Depositing User: Paul Bills
Date Deposited: 16 Oct 2013 12:08
Last Modified: 16 Oct 2013 12:08
URI: http://eprints.hud.ac.uk/id/eprint/18906

Downloads

Downloads per month over past year

Repository Staff Only: item control page

View Item View Item

University of Huddersfield, Queensgate, Huddersfield, HD1 3DH Copyright and Disclaimer All rights reserved ©