Items where Subject is "T Technology > TP Chemical technology"
 | Up a level |
- Library of Congress Subject Areas (66)
- T Technology (66)
- TP Chemical technology (66)
- T Technology (66)
accreditation
Campbell, Grant M. and Belton, Daniel J. (2016) Setting up new chemical engineering degree programmes: Exercises in design and retrofit within constraints. Education for Chemical Engineers, 17. pp. 1-13. ISSN 1749-7728
adsorption calorimetry
Cross, Hannah E. and Brown, D.R. (2010) Entrained Sodium in Mixed Metal Oxide Catalysts Derived from Layered Double Hydroxides. Catalysis Communications, 12 (3). pp. 243-245. ISSN 1566-7367
Alkanes
Pascal, M, Lamont, C.L.A., Kittel, M., Hoeft, J.T., Constant, L., Polcik, M., Bradshaw, A.M., Toomes, R.L. and Woodruff, D.P. (2002) Methyl on Cu(111)––structural determination including influence of co-adsorbed iodine. Surface Science, 512 (3). pp. 173-184. ISSN 0039-6028
Ammonia
Kittel, M., Hoeft, J.T., Bao, S., Polcik, M., Toomes, R.L., Kang, J.H., Woodruff, D.P., Pascal, M. and Lamont, C.L.A. (2002) The local adsorption geometry of CO and NH3 on NiO(1 0 0) determined by scanned-energy mode photoelectron diffraction. Surface Science, 499 (1). pp. 1-14. ISSN 0039-6028
and topography
Kittel, M., Hoeft, J.T., Bao, S., Polcik, M., Toomes, R.L., Kang, J.H., Woodruff, D.P., Pascal, M. and Lamont, C.L.A. (2002) The local adsorption geometry of CO and NH3 on NiO(1 0 0) determined by scanned-energy mode photoelectron diffraction. Surface Science, 499 (1). pp. 1-14. ISSN 0039-6028
Toomes, R, Polcik, M., Kittel, M., Hoeft, J.T., Sayago, D. I., Pascal, M., Lamont, C.L.A., Robinson, J. and Woodruff, D.P. (2002) Structure determination of methanethiolate on unreconstructed Cu(1 1 1) by scanned-energy mode photoelectron diffraction. Surface Science, 513 (3). pp. 437-452. ISSN 0039-6028
biocatalyst stability
Peron, Y, Ramsden, D. K. and Hughes, J. (2001) The Characteristics of Two Layer Suspensions and Their Potential for Use in Immobilized Biocatalyst Bioreactors to Minimize Substrate Deactivation. Food and Bioproducts Processing, 79 (2). pp. 122-128. ISSN 0960-3085
biomolecule
Ghorani, B., Russell, S. J., Hebden, A. J. and Goswami, Parikshit (2017) Single Step Assembly of Biomolecule-loaded Sub-micron Polysulfone Fibers. Textile Research Journal, 87 (3). pp. 340-350. ISSN 0040-5175
bioreactor
Peron, Y, Ramsden, D. K. and Hughes, J. (2001) The Characteristics of Two Layer Suspensions and Their Potential for Use in Immobilized Biocatalyst Bioreactors to Minimize Substrate Deactivation. Food and Bioproducts Processing, 79 (2). pp. 122-128. ISSN 0960-3085
bis-acrylic composite
Abouelatta, O.B., El-Bediwi, A., Sakrana, A., Jiang, Xiang and Blunt, Liam (2006) Surface integrity of provisional resin materials. Measurement Science and Technology, 17 (3). pp. 584-591. ISSN 0957-0233
Carbon monoxide
Kittel, M., Hoeft, J.T., Bao, S., Polcik, M., Toomes, R.L., Kang, J.H., Woodruff, D.P., Pascal, M. and Lamont, C.L.A. (2002) The local adsorption geometry of CO and NH3 on NiO(1 0 0) determined by scanned-energy mode photoelectron diffraction. Surface Science, 499 (1). pp. 1-14. ISSN 0039-6028
catalysis
Cross, Hannah E. and Brown, D.R. (2010) Entrained Sodium in Mixed Metal Oxide Catalysts Derived from Layered Double Hydroxides. Catalysis Communications, 12 (3). pp. 243-245. ISSN 1566-7367
Chemical Process Development
Atherton, John H. (2011) Physicochemical Data Requirements for the Design of Fine Chemicals Processes: Acquisition and Application. In: Pharmaceutical Process Development. Current Chemical and Engineering Challenges. RSC Drug Discovery Series (9). RSC, Cambridge UK, pp. 178-206. ISBN 978-1-84973-146-1
Chemicals Industry
Denton, Paul, Tan, Kim H., Hajjaji, Mufeed and Bashir, Abid (2010) Chemical Industry Supply Chain Innovation: A Case Study of e-Enablement Practice. In: Proceedings of the 16th International Working Seminar on Production Economics, Congress Innsbruck, Innsbruck, Austria, 1-5 March 2010. [Unkown], pp. 135-146.
Chemisorption
Kittel, M., Hoeft, J.T., Bao, S., Polcik, M., Toomes, R.L., Kang, J.H., Woodruff, D.P., Pascal, M. and Lamont, C.L.A. (2002) The local adsorption geometry of CO and NH3 on NiO(1 0 0) determined by scanned-energy mode photoelectron diffraction. Surface Science, 499 (1). pp. 1-14. ISSN 0039-6028
Toomes, R, Polcik, M., Kittel, M., Hoeft, J.T., Sayago, D. I., Pascal, M., Lamont, C.L.A., Robinson, J. and Woodruff, D.P. (2002) Structure determination of methanethiolate on unreconstructed Cu(1 1 1) by scanned-energy mode photoelectron diffraction. Surface Science, 513 (3). pp. 437-452. ISSN 0039-6028
composites
Tausif, Muhammad, Pliakas, Achilles, O'Haire, Tom, Goswami, Parikshit and Russell, Stephen J. (2017) Mechanical Properties of Nonwoven Reinforced Thermoplastic Polyurethane Composites. Materials, 10 (6). ISSN 1996-1944
consumer products
Hill, Philippa J., Taylor, Mark, Goswami, Parikshit and Blackburn, Richard S. (2017) Substitution of PFAS Chemistry in Outdoor Apparel and Impact on Repellency Performance. Chemosphere, 181. pp. 500-507. ISSN 0045-6535
Copper
Pascal, M, Lamont, C.L.A., Kittel, M., Hoeft, J.T., Constant, L., Polcik, M., Bradshaw, A.M., Toomes, R.L. and Woodruff, D.P. (2002) Methyl on Cu(111)––structural determination including influence of co-adsorbed iodine. Surface Science, 512 (3). pp. 173-184. ISSN 0039-6028
Toomes, R, Polcik, M., Kittel, M., Hoeft, J.T., Sayago, D. I., Pascal, M., Lamont, C.L.A., Robinson, J. and Woodruff, D.P. (2002) Structure determination of methanethiolate on unreconstructed Cu(1 1 1) by scanned-energy mode photoelectron diffraction. Surface Science, 513 (3). pp. 437-452. ISSN 0039-6028
creatinine
Ghorani, B., Russell, S. J., Hebden, A. J. and Goswami, Parikshit (2017) Single Step Assembly of Biomolecule-loaded Sub-micron Polysulfone Fibers. Textile Research Journal, 87 (3). pp. 340-350. ISSN 0040-5175
curriculum
Campbell, Grant M. and Belton, Daniel J. (2016) Setting up new chemical engineering degree programmes: Exercises in design and retrofit within constraints. Education for Chemical Engineers, 17. pp. 1-13. ISSN 1749-7728
cyanoacrylate fuming
Jones, Benjamin, Downham, R and Sears, V.G. (2012) Nanoscale Analysis of the Interaction Between Cyanoacrylate and Vacuum Metal Deposition in the Development of Latent Fingermarks on Low-Density Polyethylene. Journal of Forensic Sciences, 57 (1). pp. 196-200. ISSN 0022-1198
design project
Campbell, Grant M. and Belton, Daniel J. (2016) Setting up new chemical engineering degree programmes: Exercises in design and retrofit within constraints. Education for Chemical Engineers, 17. pp. 1-13. ISSN 1749-7728
E-marketplace
Denton, Paul, Tan, Kim H., Hajjaji, Mufeed and Bashir, Abid (2010) Chemical Industry Supply Chain Innovation: A Case Study of e-Enablement Practice. In: Proceedings of the 16th International Working Seminar on Production Economics, Congress Innsbruck, Innsbruck, Austria, 1-5 March 2010. [Unkown], pp. 135-146.
electrospinning
Ghorani, B., Russell, S. J., Hebden, A. J. and Goswami, Parikshit (2017) Single Step Assembly of Biomolecule-loaded Sub-micron Polysulfone Fibers. Textile Research Journal, 87 (3). pp. 340-350. ISSN 0040-5175
entrained sodium
Cross, Hannah E. and Brown, D.R. (2010) Entrained Sodium in Mixed Metal Oxide Catalysts Derived from Layered Double Hydroxides. Catalysis Communications, 12 (3). pp. 243-245. ISSN 1566-7367
fibre reinforced
Tausif, Muhammad, Pliakas, Achilles, O'Haire, Tom, Goswami, Parikshit and Russell, Stephen J. (2017) Mechanical Properties of Nonwoven Reinforced Thermoplastic Polyurethane Composites. Materials, 10 (6). ISSN 1996-1944
fingerprints
Jones, Benjamin, Downham, R and Sears, V.G. (2012) Nanoscale Analysis of the Interaction Between Cyanoacrylate and Vacuum Metal Deposition in the Development of Latent Fingermarks on Low-Density Polyethylene. Journal of Forensic Sciences, 57 (1). pp. 196-200. ISSN 0022-1198
flexible
Tausif, Muhammad, Pliakas, Achilles, O'Haire, Tom, Goswami, Parikshit and Russell, Stephen J. (2017) Mechanical Properties of Nonwoven Reinforced Thermoplastic Polyurethane Composites. Materials, 10 (6). ISSN 1996-1944
forensic science
Jones, Benjamin, Downham, R and Sears, V.G. (2012) Nanoscale Analysis of the Interaction Between Cyanoacrylate and Vacuum Metal Deposition in the Development of Latent Fingermarks on Low-Density Polyethylene. Journal of Forensic Sciences, 57 (1). pp. 196-200. ISSN 0022-1198
friction ridge impression
Jones, Benjamin, Downham, R and Sears, V.G. (2012) Nanoscale Analysis of the Interaction Between Cyanoacrylate and Vacuum Metal Deposition in the Development of Latent Fingermarks on Low-Density Polyethylene. Journal of Forensic Sciences, 57 (1). pp. 196-200. ISSN 0022-1198
hardness
Abouelatta, O.B., El-Bediwi, A., Sakrana, A., Jiang, Xiang and Blunt, Liam (2006) Surface integrity of provisional resin materials. Measurement Science and Technology, 17 (3). pp. 584-591. ISSN 0957-0233
Hydrotalcite
Cross, Hannah E. and Brown, D.R. (2010) Entrained Sodium in Mixed Metal Oxide Catalysts Derived from Layered Double Hydroxides. Catalysis Communications, 12 (3). pp. 243-245. ISSN 1566-7367
immobilized biocatalyst
Peron, Y, Ramsden, D. K. and Hughes, J. (2001) The Characteristics of Two Layer Suspensions and Their Potential for Use in Immobilized Biocatalyst Bioreactors to Minimize Substrate Deactivation. Food and Bioproducts Processing, 79 (2). pp. 122-128. ISSN 0960-3085
Iodine
Pascal, M, Lamont, C.L.A., Kittel, M., Hoeft, J.T., Constant, L., Polcik, M., Bradshaw, A.M., Toomes, R.L. and Woodruff, D.P. (2002) Methyl on Cu(111)––structural determination including influence of co-adsorbed iodine. Surface Science, 512 (3). pp. 173-184. ISSN 0039-6028
laboratory infrastructure
Campbell, Grant M. and Belton, Daniel J. (2016) Setting up new chemical engineering degree programmes: Exercises in design and retrofit within constraints. Education for Chemical Engineers, 17. pp. 1-13. ISSN 1749-7728
latent fingermark
Jones, Benjamin, Downham, R and Sears, V.G. (2012) Nanoscale Analysis of the Interaction Between Cyanoacrylate and Vacuum Metal Deposition in the Development of Latent Fingermarks on Low-Density Polyethylene. Journal of Forensic Sciences, 57 (1). pp. 196-200. ISSN 0022-1198
layered double hydroxide
Cross, Hannah E. and Brown, D.R. (2010) Entrained Sodium in Mixed Metal Oxide Catalysts Derived from Layered Double Hydroxides. Catalysis Communications, 12 (3). pp. 243-245. ISSN 1566-7367
LDH
Cross, Hannah E. and Brown, D.R. (2010) Entrained Sodium in Mixed Metal Oxide Catalysts Derived from Layered Double Hydroxides. Catalysis Communications, 12 (3). pp. 243-245. ISSN 1566-7367
low cost
Tausif, Muhammad, Pliakas, Achilles, O'Haire, Tom, Goswami, Parikshit and Russell, Stephen J. (2017) Mechanical Properties of Nonwoven Reinforced Thermoplastic Polyurethane Composites. Materials, 10 (6). ISSN 1996-1944
mechanical properties
Tausif, Muhammad, Pliakas, Achilles, O'Haire, Tom, Goswami, Parikshit and Russell, Stephen J. (2017) Mechanical Properties of Nonwoven Reinforced Thermoplastic Polyurethane Composites. Materials, 10 (6). ISSN 1996-1944
microscopy
Jones, Benjamin, Downham, R and Sears, V.G. (2012) Nanoscale Analysis of the Interaction Between Cyanoacrylate and Vacuum Metal Deposition in the Development of Latent Fingermarks on Low-Density Polyethylene. Journal of Forensic Sciences, 57 (1). pp. 196-200. ISSN 0022-1198
mixing time
Peron, Y, Ramsden, D. K. and Hughes, J. (2001) The Characteristics of Two Layer Suspensions and Their Potential for Use in Immobilized Biocatalyst Bioreactors to Minimize Substrate Deactivation. Food and Bioproducts Processing, 79 (2). pp. 122-128. ISSN 0960-3085
morphology
Kittel, M., Hoeft, J.T., Bao, S., Polcik, M., Toomes, R.L., Kang, J.H., Woodruff, D.P., Pascal, M. and Lamont, C.L.A. (2002) The local adsorption geometry of CO and NH3 on NiO(1 0 0) determined by scanned-energy mode photoelectron diffraction. Surface Science, 499 (1). pp. 1-14. ISSN 0039-6028
Toomes, R, Polcik, M., Kittel, M., Hoeft, J.T., Sayago, D. I., Pascal, M., Lamont, C.L.A., Robinson, J. and Woodruff, D.P. (2002) Structure determination of methanethiolate on unreconstructed Cu(1 1 1) by scanned-energy mode photoelectron diffraction. Surface Science, 513 (3). pp. 437-452. ISSN 0039-6028
nanofibers
Ghorani, B., Russell, S. J., Hebden, A. J. and Goswami, Parikshit (2017) Single Step Assembly of Biomolecule-loaded Sub-micron Polysulfone Fibers. Textile Research Journal, 87 (3). pp. 340-350. ISSN 0040-5175
nanoparticle
Jones, Benjamin, Downham, R and Sears, V.G. (2012) Nanoscale Analysis of the Interaction Between Cyanoacrylate and Vacuum Metal Deposition in the Development of Latent Fingermarks on Low-Density Polyethylene. Journal of Forensic Sciences, 57 (1). pp. 196-200. ISSN 0022-1198
Nickel oxides
Kittel, M., Hoeft, J.T., Bao, S., Polcik, M., Toomes, R.L., Kang, J.H., Woodruff, D.P., Pascal, M. and Lamont, C.L.A. (2002) The local adsorption geometry of CO and NH3 on NiO(1 0 0) determined by scanned-energy mode photoelectron diffraction. Surface Science, 499 (1). pp. 1-14. ISSN 0039-6028
nonwovens
Tausif, Muhammad, Pliakas, Achilles, O'Haire, Tom, Goswami, Parikshit and Russell, Stephen J. (2017) Mechanical Properties of Nonwoven Reinforced Thermoplastic Polyurethane Composites. Materials, 10 (6). ISSN 1996-1944
outdoor apparel
Hill, Philippa J., Taylor, Mark, Goswami, Parikshit and Blackburn, Richard S. (2017) Substitution of PFAS Chemistry in Outdoor Apparel and Impact on Repellency Performance. Chemosphere, 181. pp. 500-507. ISSN 0045-6535
PEMA
Abouelatta, O.B., El-Bediwi, A., Sakrana, A., Jiang, Xiang and Blunt, Liam (2006) Surface integrity of provisional resin materials. Measurement Science and Technology, 17 (3). pp. 584-591. ISSN 0957-0233
Per- and polyfluoroalkyl substances
Hill, Philippa J., Taylor, Mark, Goswami, Parikshit and Blackburn, Richard S. (2017) Substitution of PFAS Chemistry in Outdoor Apparel and Impact on Repellency Performance. Chemosphere, 181. pp. 500-507. ISSN 0045-6535
PFOA and PFOS
Hill, Philippa J., Taylor, Mark, Goswami, Parikshit and Blackburn, Richard S. (2017) Substitution of PFAS Chemistry in Outdoor Apparel and Impact on Repellency Performance. Chemosphere, 181. pp. 500-507. ISSN 0045-6535
Photoelectron diffraction
Kittel, M., Hoeft, J.T., Bao, S., Polcik, M., Toomes, R.L., Kang, J.H., Woodruff, D.P., Pascal, M. and Lamont, C.L.A. (2002) The local adsorption geometry of CO and NH3 on NiO(1 0 0) determined by scanned-energy mode photoelectron diffraction. Surface Science, 499 (1). pp. 1-14. ISSN 0039-6028
Pascal, M, Lamont, C.L.A., Kittel, M., Hoeft, J.T., Constant, L., Polcik, M., Bradshaw, A.M., Toomes, R.L. and Woodruff, D.P. (2002) Methyl on Cu(111)––structural determination including influence of co-adsorbed iodine. Surface Science, 512 (3). pp. 173-184. ISSN 0039-6028
Toomes, R, Polcik, M., Kittel, M., Hoeft, J.T., Sayago, D. I., Pascal, M., Lamont, C.L.A., Robinson, J. and Woodruff, D.P. (2002) Structure determination of methanethiolate on unreconstructed Cu(1 1 1) by scanned-energy mode photoelectron diffraction. Surface Science, 513 (3). pp. 437-452. ISSN 0039-6028
polysulfone
Ghorani, B., Russell, S. J., Hebden, A. J. and Goswami, Parikshit (2017) Single Step Assembly of Biomolecule-loaded Sub-micron Polysulfone Fibers. Textile Research Journal, 87 (3). pp. 340-350. ISSN 0040-5175
programme design
Campbell, Grant M. and Belton, Daniel J. (2016) Setting up new chemical engineering degree programmes: Exercises in design and retrofit within constraints. Education for Chemical Engineers, 17. pp. 1-13. ISSN 1749-7728
roughness
Kittel, M., Hoeft, J.T., Bao, S., Polcik, M., Toomes, R.L., Kang, J.H., Woodruff, D.P., Pascal, M. and Lamont, C.L.A. (2002) The local adsorption geometry of CO and NH3 on NiO(1 0 0) determined by scanned-energy mode photoelectron diffraction. Surface Science, 499 (1). pp. 1-14. ISSN 0039-6028
Toomes, R, Polcik, M., Kittel, M., Hoeft, J.T., Sayago, D. I., Pascal, M., Lamont, C.L.A., Robinson, J. and Woodruff, D.P. (2002) Structure determination of methanethiolate on unreconstructed Cu(1 1 1) by scanned-energy mode photoelectron diffraction. Surface Science, 513 (3). pp. 437-452. ISSN 0039-6028
SEM- EDX
Hill, Philippa J., Taylor, Mark, Goswami, Parikshit and Blackburn, Richard S. (2017) Substitution of PFAS Chemistry in Outdoor Apparel and Impact on Repellency Performance. Chemosphere, 181. pp. 500-507. ISSN 0045-6535
Single crystal epitaxy
Kittel, M., Hoeft, J.T., Bao, S., Polcik, M., Toomes, R.L., Kang, J.H., Woodruff, D.P., Pascal, M. and Lamont, C.L.A. (2002) The local adsorption geometry of CO and NH3 on NiO(1 0 0) determined by scanned-energy mode photoelectron diffraction. Surface Science, 499 (1). pp. 1-14. ISSN 0039-6028
Single crystal surfaces
Pascal, M, Lamont, C.L.A., Kittel, M., Hoeft, J.T., Constant, L., Polcik, M., Bradshaw, A.M., Toomes, R.L. and Woodruff, D.P. (2002) Methyl on Cu(111)––structural determination including influence of co-adsorbed iodine. Surface Science, 512 (3). pp. 173-184. ISSN 0039-6028
solid base
Cross, Hannah E. and Brown, D.R. (2010) Entrained Sodium in Mixed Metal Oxide Catalysts Derived from Layered Double Hydroxides. Catalysis Communications, 12 (3). pp. 243-245. ISSN 1566-7367
substrate mixing
Peron, Y, Ramsden, D. K. and Hughes, J. (2001) The Characteristics of Two Layer Suspensions and Their Potential for Use in Immobilized Biocatalyst Bioreactors to Minimize Substrate Deactivation. Food and Bioproducts Processing, 79 (2). pp. 122-128. ISSN 0960-3085
superglue
Jones, Benjamin, Downham, R and Sears, V.G. (2012) Nanoscale Analysis of the Interaction Between Cyanoacrylate and Vacuum Metal Deposition in the Development of Latent Fingermarks on Low-Density Polyethylene. Journal of Forensic Sciences, 57 (1). pp. 196-200. ISSN 0022-1198
Supply Chain Management
Denton, Paul, Tan, Kim H., Hajjaji, Mufeed and Bashir, Abid (2010) Chemical Industry Supply Chain Innovation: A Case Study of e-Enablement Practice. In: Proceedings of the 16th International Working Seminar on Production Economics, Congress Innsbruck, Innsbruck, Austria, 1-5 March 2010. [Unkown], pp. 135-146.
surface roughness
Abouelatta, O.B., El-Bediwi, A., Sakrana, A., Jiang, Xiang and Blunt, Liam (2006) Surface integrity of provisional resin materials. Measurement Science and Technology, 17 (3). pp. 584-591. ISSN 0957-0233
Surface structure
Kittel, M., Hoeft, J.T., Bao, S., Polcik, M., Toomes, R.L., Kang, J.H., Woodruff, D.P., Pascal, M. and Lamont, C.L.A. (2002) The local adsorption geometry of CO and NH3 on NiO(1 0 0) determined by scanned-energy mode photoelectron diffraction. Surface Science, 499 (1). pp. 1-14. ISSN 0039-6028
Toomes, R, Polcik, M., Kittel, M., Hoeft, J.T., Sayago, D. I., Pascal, M., Lamont, C.L.A., Robinson, J. and Woodruff, D.P. (2002) Structure determination of methanethiolate on unreconstructed Cu(1 1 1) by scanned-energy mode photoelectron diffraction. Surface Science, 513 (3). pp. 437-452. ISSN 0039-6028
sustainability
Hill, Philippa J., Taylor, Mark, Goswami, Parikshit and Blackburn, Richard S. (2017) Substitution of PFAS Chemistry in Outdoor Apparel and Impact on Repellency Performance. Chemosphere, 181. pp. 500-507. ISSN 0045-6535
vacuum metal deposition
Jones, Benjamin, Downham, R and Sears, V.G. (2012) Nanoscale Analysis of the Interaction Between Cyanoacrylate and Vacuum Metal Deposition in the Development of Latent Fingermarks on Low-Density Polyethylene. Journal of Forensic Sciences, 57 (1). pp. 196-200. ISSN 0022-1198
validation
Campbell, Grant M. and Belton, Daniel J. (2016) Setting up new chemical engineering degree programmes: Exercises in design and retrofit within constraints. Education for Chemical Engineers, 17. pp. 1-13. ISSN 1749-7728