Items where School is "Turbocharger Research Institute"
![[up]](/style/images/multi_up.png)
Up a level- University of Huddersfield (28749)
- School of Computing and Engineering (4931)
- Turbocharger Research Institute (72)
- School of Computing and Engineering (4931)
Aeroacoustics
Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.
aerostatic
Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X
Air flow
Pillutla, G., Mishra, Rakesh, Barrans, Simon and Barrans, J (2009) Experimental and numerical prediction of airflow in a room - literature summary. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 172-177. ISBN 9781862180857
axial stiffness
Barrans, Simon, Khodabakhshi, Goodarz and Muller, Matthias (2014) Classical and numerical approaches to determining V-section band clamp axial stiffness. Open Engineering, 5 (1). pp. 99-110. ISSN 2391-5439
bearings
Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X
bone cement
Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2007) Generation of fretting wear debris at the stem-cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-4.
CFD
Pillutla, G., Mishra, Rakesh, Barrans, Simon and Barrans, J (2009) Experimental and numerical prediction of airflow in a room - literature summary. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 172-177. ISBN 9781862180857
Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.
Sharma, Sidharath, Jupp, Martyn, Barrans, Simon and Nickson, Keith (2017) The impact of housing features relative location on a turbocharger compressor flow. International Journal of Mechanical Engineering and Robotics Research, 6 (6). pp. 451-457. ISSN 2278-0149
clamp load
Barrans, Simon, Khodabakhshi, G. and Xu, Qiang (2014) Contact Pressure Distribution in Joints Formed by V-Band Clamps. Advanced Materials Research, 1016. pp. 34-38. ISSN 1662-8985
cold roll forming
Muller, M and Barrans, Simon (2009) Ultimate axial load capacity of v-band clamp joints. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 14-18. ISBN 9781862180857
Compressor
Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.
Compressor flow
Sharma, Sidharath, Jupp, Martyn, Barrans, Simon and Nickson, Keith (2017) The impact of housing features relative location on a turbocharger compressor flow. International Journal of Mechanical Engineering and Robotics Research, 6 (6). pp. 451-457. ISSN 2278-0149
contact analysis
Muller, Matthias and Barrans, Simon (2010) Predicting and determining the contact pressure distribution in joints formed by v-band clamps. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 154-159. ISBN 9781862180932
contact pressure
Barrans, Simon, Khodabakhshi, G. and Xu, Qiang (2014) Contact Pressure Distribution in Joints Formed by V-Band Clamps. Advanced Materials Research, 1016. pp. 34-38. ISSN 1662-8985
cusp depth
Tabriz, Md Shams E. and Barrans, Simon (2018) Effect of cusp size, depth and direction on stress concentration. International Journal of Materials, Mechanics and Manufacturing, 6 (2). pp. 88-93. ISSN 1793-8198
cusp direction
Tabriz, Md Shams E. and Barrans, Simon (2018) Effect of cusp size, depth and direction on stress concentration. International Journal of Materials, Mechanics and Manufacturing, 6 (2). pp. 88-93. ISSN 1793-8198
cusp size
Tabriz, Md Shams E. and Barrans, Simon (2018) Effect of cusp size, depth and direction on stress concentration. International Journal of Materials, Mechanics and Manufacturing, 6 (2). pp. 88-93. ISSN 1793-8198
DES
Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.
design process efficiency
Barrans, Simon, Eyre, Gareth and Goddard, Michael (2015) Bespoke Part Library for an SME for Enhanced Design Efficiency. Applied Mechanics and Materials, 798. pp. 500-504. ISSN 1662-7482
Diversity metrics
Radhi, H.E. and Barrans, Simon (2013) Diversity metric assessment for multi-objective optimization. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 171-175. ISBN 9781862181212
Energy Storage
Johnson, Anthony, Dooley, Martin, Gibson, Andrew and Barrans, S M (2012) Practical Energy Storage Utilising Kinetic Energy Storage Batteries (KESB). In: 2nd International Symposium on Environment-Friendly Energies and Applications (EFEA), 25 - 27 June 2012, Northumbria University, UK.
Environmental Impact
Johnson, Anthony, Dooley, Martin, Gibson, Andrew and Barrans, S M (2012) Practical Energy Storage Utilising Kinetic Energy Storage Batteries (KESB). In: 2nd International Symposium on Environment-Friendly Energies and Applications (EFEA), 25 - 27 June 2012, Northumbria University, UK.
evaluation
Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2009) Evaluation Of Fretting Wear On The Femoral Stem Surface. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco.
Fatigue
Radhi, H.E. and Barrans, Simon (2010) Finite Element Analysis of Effect of Weld Toe Radius and Plate Thickness on Fatigue Life of Butt Welded Joint. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 60-64. ISBN 9781862180932
FEA
Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, Simon and Pislaru, Crinela (2008) Simulation of the structural elements of a three axis VMC for machine tool error compensation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 23-27. ISBN 978-1-86218-067-3
femoral stem
Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2009) Evaluation Of Fretting Wear On The Femoral Stem Surface. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco.
Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2007) Generation of fretting wear debris at the stem-cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-4.
finite element analysis
Barrans, Simon, Khodabakhshi, Goodarz and Muller, Matthias (2014) Classical and numerical approaches to determining V-section band clamp axial stiffness. Open Engineering, 5 (1). pp. 99-110. ISSN 2391-5439
Muller, M and Barrans, Simon (2009) Ultimate axial load capacity of v-band clamp joints. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 14-18. ISBN 9781862180857
Radhi, H.E. and Barrans, Simon (2010) Finite Element Analysis of Effect of Weld Toe Radius and Plate Thickness on Fatigue Life of Butt Welded Joint. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 60-64. ISBN 9781862180932
Sahboun, Salahaddin and Barrans, Simon (2015) Simulating Torsional Slip in V-band Clamp Joints. Applied Mechanics and Materials, 798. pp. 53-58. ISSN 1662-7482
Tabriz, Md Shams E. and Barrans, Simon (2018) Effect of cusp size, depth and direction on stress concentration. International Journal of Materials, Mechanics and Manufacturing, 6 (2). pp. 88-93. ISSN 1793-8198
finite element model
Muller, Matthias and Barrans, Simon (2010) Predicting and determining the contact pressure distribution in joints formed by v-band clamps. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 154-159. ISBN 9781862180932
Flywheels
Johnson, Anthony, Dooley, Martin, Gibson, Andrew and Barrans, S M (2012) Practical Energy Storage Utilising Kinetic Energy Storage Batteries (KESB). In: 2nd International Symposium on Environment-Friendly Energies and Applications (EFEA), 25 - 27 June 2012, Northumbria University, UK.
Fretting wear
Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2009) Evaluation Of Fretting Wear On The Femoral Stem Surface. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco.
Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2007) Generation of fretting wear debris at the stem-cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-4.
friction
Sahboun, Salahaddin and Barrans, Simon (2015) Simulating Torsional Slip in V-band Clamp Joints. Applied Mechanics and Materials, 798. pp. 53-58. ISSN 1662-7482
Genetic algorithms
Radhi, H.E. and Barrans, Simon (2011) Comparison between Multiobjective Population-Based Algorithms in Mechanical Problem. Applied Mechanics and Materials, 110-16. pp. 2383-2389. ISSN 1662-7482
Radhi, H.E. and Barrans, Simon (2012) Comparison between multiobjective optimization algorithms. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 129-135. ISBN 978-1-86218-106-9
kinetic Energy
Johnson, Anthony, Dooley, Martin, Gibson, Andrew and Barrans, S M (2012) Practical Energy Storage Utilising Kinetic Energy Storage Batteries (KESB). In: 2nd International Symposium on Environment-Friendly Energies and Applications (EFEA), 25 - 27 June 2012, Northumbria University, UK.
LES
Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.
machine tool non-rigid errors
Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, Simon and Pislaru, Crinela (2008) Simulation of the structural elements of a three axis VMC for machine tool error compensation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 23-27. ISBN 978-1-86218-067-3
Marman clamp
Barrans, Simon, Khodabakhshi, G. and Xu, Qiang (2014) Contact Pressure Distribution in Joints Formed by V-Band Clamps. Advanced Materials Research, 1016. pp. 34-38. ISSN 1662-8985
Modal decomposition
Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.
MOPSO
Radhi, H.E. and Barrans, Simon (2011) Comparison between Multiobjective Population-Based Algorithms in Mechanical Problem. Applied Mechanics and Materials, 110-16. pp. 2383-2389. ISSN 1662-7482
MOSA
Radhi, H.E. and Barrans, Simon (2011) Comparison between Multiobjective Population-Based Algorithms in Mechanical Problem. Applied Mechanics and Materials, 110-16. pp. 2383-2389. ISSN 1662-7482
Radhi, H.E. and Barrans, Simon (2012) Comparison between multiobjective optimization algorithms. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 129-135. ISBN 978-1-86218-106-9
Multi-objective optimization
Radhi, H.E. and Barrans, Simon (2011) Comparison between Multiobjective Population-Based Algorithms in Mechanical Problem. Applied Mechanics and Materials, 110-16. pp. 2383-2389. ISSN 1662-7482
Radhi, H.E. and Barrans, Simon (2012) Comparison between multiobjective optimization algorithms. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 129-135. ISBN 978-1-86218-106-9
Radhi, H.E. and Barrans, Simon (2013) Diversity metric assessment for multi-objective optimization. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 171-175. ISBN 9781862181212
offline simulation
Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, Simon and Pislaru, Crinela (2008) Simulation of the structural elements of a three axis VMC for machine tool error compensation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 23-27. ISBN 978-1-86218-067-3
Pareto
Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X
part classification
Barrans, Simon, Eyre, Gareth and Goddard, Michael (2015) Bespoke Part Library for an SME for Enhanced Design Efficiency. Applied Mechanics and Materials, 798. pp. 500-504. ISSN 1662-7482
Part library
Barrans, Simon, Eyre, Gareth and Goddard, Michael (2015) Bespoke Part Library for an SME for Enhanced Design Efficiency. Applied Mechanics and Materials, 798. pp. 500-504. ISSN 1662-7482
plasticity
Muller, M and Barrans, Simon (2009) Ultimate axial load capacity of v-band clamp joints. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 14-18. ISBN 9781862180857
POD
Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.
Ported shroud
Sharma, Sidharath, Jupp, Martyn, Barrans, Simon and Nickson, Keith (2017) The impact of housing features relative location on a turbocharger compressor flow. International Journal of Mechanical Engineering and Robotics Research, 6 (6). pp. 451-457. ISSN 2278-0149
RANS
Sharma, Sidharath, Jupp, Martyn, Barrans, Simon and Nickson, Keith (2017) The impact of housing features relative location on a turbocharger compressor flow. International Journal of Mechanical Engineering and Robotics Research, 6 (6). pp. 451-457. ISSN 2278-0149
SBES
Sharma, Sidharath (2019) Numerical characterisation of flow-induced noise in a small high-speed centrifugal compressor with casing treatment. Doctoral thesis, University of Huddersfield.
simulation
Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2009) Evaluation Of Fretting Wear On The Femoral Stem Surface. In: International Conference on Bioengineering and Biomaterials, 18 - 20 March 2009, ENSAM, Meknes, Morocco.
spatial resolution
Poxton, Anthony, Longstaff, Andrew P., Barrans, Simon, Myers, Alan, Fletcher, Simon and Pislaru, Crinela (2008) Simulation of the structural elements of a three axis VMC for machine tool error compensation. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2008: CEARC’08. University of Huddersfield, Huddersfield, pp. 23-27. ISBN 978-1-86218-067-3
standardisation
Barrans, Simon, Eyre, Gareth and Goddard, Michael (2015) Bespoke Part Library for an SME for Enhanced Design Efficiency. Applied Mechanics and Materials, 798. pp. 500-504. ISSN 1662-7482
stress distribution
Tabriz, Md Shams E. and Barrans, Simon (2018) Effect of cusp size, depth and direction on stress concentration. International Journal of Materials, Mechanics and Manufacturing, 6 (2). pp. 88-93. ISSN 1793-8198
surface
Bhat, N., Barrans, Simon and Kumar, A.S. (2010) Performance analysis of Pareto optimal bearings subject to surface error variations. Tribology International, 43 (11). pp. 2240-2249. ISSN 0301679X
surface roughness
Muller, Matthias and Barrans, Simon (2010) Predicting and determining the contact pressure distribution in joints formed by v-band clamps. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 154-159. ISBN 9781862180932
Sustainable design
Johnson, Anthony, Dooley, Martin, Gibson, Andrew and Barrans, S M (2012) Practical Energy Storage Utilising Kinetic Energy Storage Batteries (KESB). In: 2nd International Symposium on Environment-Friendly Energies and Applications (EFEA), 25 - 27 June 2012, Northumbria University, UK.
Sustainable Engineering
Johnson, Anthony, Dooley, Martin, Gibson, Andrew and Barrans, S M (2012) Practical Energy Storage Utilising Kinetic Energy Storage Batteries (KESB). In: 2nd International Symposium on Environment-Friendly Energies and Applications (EFEA), 25 - 27 June 2012, Northumbria University, UK.
Sustainable life value
Johnson, Anthony, Dooley, Martin, Gibson, Andrew and Barrans, S M (2012) Practical Energy Storage Utilising Kinetic Energy Storage Batteries (KESB). In: 2nd International Symposium on Environment-Friendly Energies and Applications (EFEA), 25 - 27 June 2012, Northumbria University, UK.
torsional load capacity
Sahboun, Salahaddin and Barrans, Simon (2015) Simulating Torsional Slip in V-band Clamp Joints. Applied Mechanics and Materials, 798. pp. 53-58. ISSN 1662-7482
traditional engineering
Johnson, Anthony, Dooley, Martin, Gibson, Andrew and Barrans, S M (2012) Practical Energy Storage Utilising Kinetic Energy Storage Batteries (KESB). In: 2nd International Symposium on Environment-Friendly Energies and Applications (EFEA), 25 - 27 June 2012, Northumbria University, UK.
turbocharger
Barrans, Simon, Khodabakhshi, Goodarz and Muller, Matthias (2014) Classical and numerical approaches to determining V-section band clamp axial stiffness. Open Engineering, 5 (1). pp. 99-110. ISSN 2391-5439
URANS
Sharma, Sidharath, Jupp, Martyn, Barrans, Simon and Nickson, Keith (2017) The impact of housing features relative location on a turbocharger compressor flow. International Journal of Mechanical Engineering and Robotics Research, 6 (6). pp. 451-457. ISSN 2278-0149
V-band clamp
Barrans, Simon, Khodabakhshi, Goodarz and Muller, Matthias (2014) Classical and numerical approaches to determining V-section band clamp axial stiffness. Open Engineering, 5 (1). pp. 99-110. ISSN 2391-5439
Muller, Matthias and Barrans, Simon (2010) Predicting and determining the contact pressure distribution in joints formed by v-band clamps. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 154-159. ISBN 9781862180932
Sahboun, Salahaddin and Barrans, Simon (2015) Simulating Torsional Slip in V-band Clamp Joints. Applied Mechanics and Materials, 798. pp. 53-58. ISSN 1662-7482
V-band retainer
Muller, M and Barrans, Simon (2009) Ultimate axial load capacity of v-band clamp joints. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 14-18. ISBN 9781862180857
V-section band clamp
Barrans, Simon, Khodabakhshi, G. and Xu, Qiang (2014) Contact Pressure Distribution in Joints Formed by V-Band Clamps. Advanced Materials Research, 1016. pp. 34-38. ISSN 1662-8985
wear debris
Zhang, H., Brown, L., Blunt, Liam and Barrans, Simon (2007) Generation of fretting wear debris at the stem-cement interface in total hip replacement. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2007: CEARC’07. University of Huddersfield, Huddersfield, pp. 1-4.