Items where Author is Ball, Andrew

Group by: Date | Creators | Item Type | Uncontrolled Keywords | No Grouping

ABS Accumulated Deviation acoustic Acoustic emission Acoustic Emission Monitoring Acoustic-emission ACS-SSI active control adaptive neuro fuzzy inference system airborne acoustic signals Airborne sound Alternative fuels artificial intelligence Artificial Neural Networks Asymmetry attenuation Auto-correlated envelope ensemble average Autocorrelation Automotive Ball Bearings failure Bearing Bearing fault detection Bearing fault diagnosis Bearing faults Bearings Biodiesel Bispectrum Blend blockage detection Bogie brake specific fuel consumption Centrifugal pump Centrifugal pumps CI engine combustion characteristics Combustion Diagnosis combustion pressure Combustion Process condition monitoring condition monitoring condition monitoring system Condition Monitoring System: Vibration Control algorithm copper and iron losses creep forces Current signal analysis Current Signature Cylinder liner cylinder pressure Data processing Density Diagnosis Dielectric property Diesel Engine Diesel Engine Valve clearance Digital Signal Processing and Imaging Drive Cycle dynamic behaviour Dynamic deformation dynamic response early failure early failure detection Eccentric bore Efficiency Elasto-hydrodynamic lubrication electrical drives electrical energy electro-hydraulic system Emission prediction Empirical mode decomposition Encoder energy harvesting energy efficient energy recovery Ensemble average autocorrelation Envelop analysis Envelope Envelope analysis Envelope spectrum Exhaust Acoustics expert system fatigue analysis Fault detection fault diagnosis field-oriented control Finite element fluid/structure coupling system FMCG industry Friction force Friction heat generation Fuel supply system Fule Economy fundamental frequency fundamental frequency Gear wear Gearbox Gearbox fault detection Gearbox monitoring grey-box model Higher Order Statistics Hilbert transform IEEE802.15.4 In-Cylinder Pressure In-Cylinder Temperature Induction motor induction motors Injector Fault Instantaneous angular speed Instantaneous Angular Speed (IAS) integrated control intelligent sensing interference Intrinsic time-scale decomposition Inverter field operated controller (IFOC) inverters Kurtogram Kurtosis Link Quality Estimation Link Quality Properties Local processing Lubricating oil Mechanical seal Mechanical seals MENS accelerometer Metal particle emission microphone array Minimum entropy deconvolution (MED) Misalignment Model Based Fault Detection Method model-based approach Modelling Modelling simulation scale roller rig critical speed Modulation signal bispectrum Moisture motor current and voltage signatures analysis Motor current signal analysis Motor Current Signature Analysis Motor current signature analysis (MSCA) Motor current signatures analysis MSB MSB analysis multibody modelling MUSIC Algorithm neural networks NOx emission Numerical model Oil film lubrication On-rotor measurement Online condition monitoring Open loop (OL) Path loss Piston ring piston slap Planetary gear Planetary gearbox Power factor Power spectrum predictive analysis techniques predictive maintenance pressure Pulse width modulation (PWM) Pump faults Radio energy modelling rail vehicle dynamic simulations rail vehicle dynamics Rail vibration railway applications railway vehicle Railway vehicle suspension Railways Random switching pattern real time reciprocating compressor reflection and transmission characteristics Reflection Suppression Ride comfort RMS Value Road handling robust adaptive observer Self aligning journal bearing Self aligning spherical journal bearing sensorless control Sensorless Variable Speed Drive Sensorless vector Sensorless VSD Shaft current Shaft Misalignment shock absorber short-time Fourier transform Short-time RMS sideband estimator signal processing Signal source separation simulation Slip rate sound localization Spatio-temporal factors Spectral correlation Spectral kurtosis spectrum analysis speed speed bump geometry Speed estimation Spiral bevel gear SSI stability static data stator asymmetries faults Stator asymmetries faults Stator resistance increase stator winding asymmetry and broken rotor bar stochastic subspace identification Support Vector Machine Surface vibration suspension modeling suspension modelling Temperature thermal efficiency Thermal-elastic coupled method tilt time delay estimation time synchronous averaging Tooth scuffing Torsional model track-based sensors traditional analysis Transient Performance Transient thermal analysis Transmission power control tribological behavior Unbalanced variable speed drive (VSD) vehicle dynamics Vehicle model vehicle speed vehicle stability vehicle suspension vehicle tyres inflation vehicle-based sensors Vibration Vibration analysis Vibration measurement Vibration response vibration signal Vibro-Acoustic vibro-acoustic analysis vibro-acoustic monitoring Viscosity water injection Wavelet packet transform Wear models wheel profiles wheel-rail contact wheel-rail interaction wheel-rail interface Wireless link quality Wireless Sensor Wireless sensor network Wireless sensor networks Wireless sensor node ZigBee

Number of items: 355.

ABS

Zheng, Lin, Shi, Zhanqun and Ball, Andrew (2013) Vehicle Anti-lock Braking System Performance using dSPACE. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 1-6. ISBN 9781862181212

Accumulated Deviation

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Condition Monitoring of CI engine running on Biodiesel using Transient Process. Key Engineering Materials, 413-14. pp. 495-503. ISSN 1013-9826

acoustic

Ahmaida, Anwar, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) Fatigue Prediction of a Gear Transmission System based on Vibro-Acoustic Measurements. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 93-99. ISBN 9781862181212

Hamomd, Osama, Ball, Andrew, Gu, Fengshou and Thobiani, F. (2013) Pump Rotor System Monitoring Based on Advanced Measurements and Analysis Techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 230. ISBN 9781862181212

Acoustic emission

Wei, Nasha, Ball, Andrew and Gu, Fengshou (2013) A Study of Alternative Fuels Potential Effects on the Combustion Engines using acoustic emission. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 239. ISBN 9781862181212

Elamin, Fathi, Fan, Yibo, Gu, Fengshou and Ball, Andrew (2009) Detection of diesel engine valve clearance by acoustic emission. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 7-13. ISBN 9781862180857

Fan, Yibo, Gu, Fengshou and Ball, Andrew (2009) Acoustic Emission Monitoring of Mechanical Seals Using MUSIC Algorithm based on Higher Order Statistics. Key Engineering Materials, 413-41. pp. 811-816. ISSN 1013-9826

Acoustic Emission Monitoring

Elamin, Fathi, Gu, Fengshou and Ball, Andrew (2010) Online Monitoring of Engine Oil Quality Based on AE Signal Analysis. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 116-123. ISBN 9781862180932

Acoustic-emission

Raharjo, Parno, Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2012) Vibro-Acoustic Characteristic of A Self Aligning Spherical Journal Bearing due to Eccentric Bore Fault. In: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK. (Unpublished)

ACS-SSI

Liu, Fulong, Gu, Fengshou, Ball, Andrew, Zhao, Yunshi and Peng, Bo (2017) The Validation of an ACS-SSI based Online Condition Monitoring for Railway Vehicle Suspension Systems using a SIMPACK Model. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017).

active control

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Review of control strategies used in modern railway vehicles. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 160. ISBN 978-1-86218-106-9

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew, Fengshou, Gu and Anyakwo, Arthur (2011) Predictive Control Strategies Used to Solve Challenges Related to Modern Railway Vehicles. In: 5th IET Conference on Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 29-30 November 2011, Derby Conference Centre, UK.

adaptive neuro fuzzy inference system

Baqqar, Mabrouka, Tran, Van Tung, Gu, Fengshou and Ball, Andrew (2013) Comparison between adaptive neuro-fuzzy inference system and general regression neural networks for gearbox fault detection using motor operating parameters. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 118-126. ISBN 9781862181212

airborne acoustic signals

Mondal, Debanjan, Gu, Fengshou and Ball, Andrew (2019) Application of Minimum Entropy Deconvolution in Diagnosis of Reciprocating Compressor Faults Based on Airborne Acoustic Analysis. In: 16th International Conference on Condition Monitoring and Asset Management (CM 2019), 25-27 June 2019, Glasgow, UK.

Airborne sound

Alternative fuels

Li, Guoxing, Gu, Fengshou, Wang, Tie and Ball, Andrew (2013) The Potential Effects of Alternative Fuels on the Lubricating Condition of Compression-ignition Engines. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 233. ISBN 9781862181212

artificial intelligence

Ashari, Djoni, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Artificial intelligence-based condition monitoring for practical electrical drives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 143. ISBN 978-1-86218-106-9

Artificial Neural Networks

Ahmed, Mahmud, Abdusslam, S.A., Baqqar, Mabrouka, Gu, Fengshou and Ball, Andrew (2011) Fault Classification of Reciprocating Compressor Based on Neural Networks and Support Vector Machines. In: Proceedings of the 17th International Conference on Automation & Computing. Chinese Automation and Computing Society, Huddersfield. ISBN 978-1-86218-098-7

Asymmetry

Lane, Mark, Shaeboub, Abdulkarim, Gu, Fengshou and Ball, Andrew (2017) Investigation of Reductions in Motor Efficiency and Power caused by Stator Faults when operated from an Inverter Drive under Open Loop and Sensorless Vector Modes. Systems Science & Control Engineering, 5 (1). pp. 361-379. ISSN 2164-2583

attenuation

Al-Arbi, Salem, Gu, Fengshou, Guan, Luyang and Ball, Andrew (2009) Remotely gear condition monitoring using traditional signal processing techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 111-117. ISBN 9781862180857

Al-Arbi, Salem, Gu, Fengshou, Guan, Luyang, Ball, Andrew and Naid, A. (2009) Gearbox Fault Diagnosis based on Vibration Signals Measured Remotely. Key Engineering Materials, 413-41. pp. 175-180. ISSN 1013-9826

Auto-correlated envelope ensemble average

Xu, Yuandong, Tang, Xiaoli, Gu, Fengshou, Ball, Andrew and Gu, James Xi (2017) Early Detection of Rolling Bearing Faults Using an Auto-correlated Envelope Ensemble Average. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017).

Autocorrelation

Xu, Yuandong, Haiyang, Li, Zhen, Dong, Rehab, Ibrahim, Gu, Fengshou and Ball, Andrew (2017) Fault Detection of Rolling Bearings Using an Ensemble Average Autocorrelation Based Stochastic Subspace Identification. In: 24th international congress on sound and vibration, 23rd-27th July 2017, London. (Unpublished)

Automotive

Ball Bearings failure

Abdalla, Gaballa, Ball, Andrew and Gu, Fengshou (2013) Fault Detection and Diagnosis of Ball Bearing Using Advanced Vibration Analysis Techniques. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, p. 224. ISBN 9781862181212

Bearing

Abdusslam, S.A., Gu, Fengshou and Ball, Andrew (2009) Bearing fault diagnosis based on vibration signals. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 93-98. ISBN 9781862180857

Bearing fault detection

Tian, Xiange, Xi Gu, James, Rehab, Ibrahim, Abdalla, Gaballa M., Gu, Fengshou and Ball, Andrew (2018) A robust detector for rolling element bearing condition monitoring based on the modulation signal bispectrum and its performance evaluation against the Kurtogram. Mechanical Systems and Signal Processing, 100. pp. 167-187. ISSN 0888-3270

Bearing fault diagnosis

Li, Long, Wang, Guangbin, Deng, Wenhui, Tang, Xiaoli, Gu, Fengshou and Ball, Andrew (2017) The Identification of Shaft Current Induced Defects on Rolling Bearings in Wind Turbine Generators. Proceedings of the 23rd International Conference on Automation & Computing (University of Huddersfield, 7-8 September 2017).

Bearing faults

Rehab, Ibrahim, Tian, Xiange, Gu, Fengshou and Ball, Andrew (2013) Roller element bearing fault detection and diagnosis based on an optimised envelope analysis. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 176-181. ISBN 9781862181212

Bearings

Biodiesel

Tesfa, Belachew, Mishra, Rakesh, Zhang, Cuiping, Gu, Fengshou and Ball, Andrew (2011) NOx Prediction Based on Cylinder Pressure Measurement for Engine Emission Monitoring. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management. COMADEM, Norway, p. 212. ISBN 0954130723

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2009) Predicting specific gravity and viscosity of biodiesel fuels. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. University of Huddersfield, Huddersfield, pp. 38-44. ISBN 9781862180857

Bispectrum

Naid, A., Gu, Fengshou, Shao, Yimin, Al-Arbi, Salem and Ball, Andrew (2009) Bispectrum Analysis of Motor Current Signals for Fault Diagnosis of Reciprocating Compressors. Key Engineering Materials, 413-41. pp. 505-511. ISSN 1013-9826

Blend

blockage detection

Duan, Wenbo, Gu, Fengshou, Dupère, Iain, Zhong, Shan and Ball, Andrew (2009) The Effects of Blockage on the Propagation of Acoustic Waves in the Liquid-Shell Coupled System. Key Engineering Materials, 413-41. pp. 327-333. ISSN 1013-9826

Bogie

Qin, G., Gu, Fengshou, Xu, Yuandong, Liu, Fulong and Ball, Andrew (2017) Bogie Speed Estimation and Signal Source Separation via Rail Vibration Analysis. In: COMADEM 2017: 30th International Congress & Exhibition on Condition Monitoring and Diagnostic Engineering Management, Monday 10th - Thursday 13th July 2017, University of Central Lancashire, Preston. (Unpublished)

brake specific fuel consumption

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2011) Combustion Characteristics of CI Engine Running with Biodiesel Blends. In: International Conference on Renewable Energies and Power Quality (ICREPQ'11), 13-15 April 2011, Las Palmas de Gran Canaria, Spain.

Centrifugal pump

Alabied, Samir, Hamomd, Osama, Daraz, Alsadak, Gu, Fengshou and Ball, Andrew (2017) Fault Diagnosis of Centrifugal Pumps based on the Intrinsic Time-scale Decomposition of Motor Current Signals. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601

Centrifugal pumps

Hamomd, Osama, Alabied, Samir, Xu, Yuandong, Daraz, Alsadak, Gu, Fengshou and Ball, Andrew (2017) Vibration Based Centrifugal Pump Fault Diagnosis Based on Modulation Signal Bispectrum Analysis. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601

CI engine

combustion characteristics

Combustion Diagnosis

Jiang, Xiang, Gu, Fengshou and Ball, Andrew (2008) Automotive Diesel Engine Performance and Condition Monitoring using Downpipe Acoustic Waveform Analysis. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield.

combustion pressure

Li, Guoxing, Gu, Fengshou, Wang, Tie, Yang, Tiantian and Ball, Andrew (2017) Investigation into the dynamic response of cylinder liners in an IC engine based on a validated finite-element model. Systems Science & Control Engineering, 5 (1). pp. 56-69. ISSN 2164-2583

Combustion Process

Aburass, Ali, Zhen, Dong, Gu, Fengshou and Ball, Andrew (2013) Combustion Diagnostics of a Diesel Engine with Biodiesel Fuels based on Vibro-acoustics and In-Cylinder Pressure Measurements. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 13-18. ISBN 9781862181212

condition monitoring

Elforjani, Badradin, Xu, Yuandong, Brethee, Khaldoon F., Wu, Zhifei, Gu, Fengshou and Ball, Andrew (2017) Monitoring Gearbox Using a Wireless Temperature Node Powered by Thermal Energy Harvesting Module. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601

Zeng, Qiang, Zainab, Mones, Shao, Yimin, Gu, Fengshou and Ball, Andrew (2017) Planetary Gear Fault Diagnosis Based on Instantaneous Angular Speed Analysis. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017).

Mones, Zainab, Zeng, Q., Hu, L., Tang, Xiaoli, Gu, Fengshou and Ball, Andrew (2017) Planetary Gearbox Fault Diagnosis Using an On-Rotor MEMS Accelerometer. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601

Muo, Ugonnaya E., Madamedon, Misan, Gu, Fengshou and Ball, Andrew (2017) Wavelet Packet Analysis and Empirical Mode Decomposition for the Fault Diagnosis of Reciprocating Compressors. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017).

Abusaad, Samieh, Benghozzi, Ahmed, Smith, Ann, Gu, Fengshou and Ball, Andrew (2015) The Detection of Shaft Misalignments using Motor Current Signals from a Sensorless Variable Speed Drive. In: Vibration Engineering and Technology of Machinery. Mechanisms and Machine Science (23). Springer, London, pp. 173-183. ISBN 978-3-319-09918-7

Moamar, Hamed, Tesfa, Belachew, Fengshou, Gu and Ball, Andrew (2014) Vehicle Suspension Performance Analysis Based on Full Vehicle Model for Condition Monitoring Development. In: VETOMAC-X 2014, 9-11th September 2014, University of Manchester, UK. (Unpublished)

Feng, Guojin, Zhen, Dong, Aliwan, M., Gu, Fengshou and Ball, Andrew (2013) Investigation of Wireless Protocols for Remote Condition Monitoring. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 19-24. ISBN 9781862181212

Towsyfyan, Hossein, Gu, Fengshou and Ball, Andrew (2013) A review of mechanical seals tribology and condition monitoring. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 200-205. ISBN 9781862181212

Hamed, M., Tesfa, Belachew, Gu, Fengshou and Ball, Andrew (2013) A study of the influence of vehicle tyre pressure on suspension system response using a full car model. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 7-12. ISBN 9781862181212

Abusaad, Samieh, Benghozzi, Ahmed, Shao, Yimin, Gu, Fengshou and Ball, Andrew (2013) Utilizing Data from a Sensorless AC Variable Speed Drive for Detecting Mechanical Misalignments. Key Engineering Materials, 569. pp. 465-472. ISSN 1013-9826

Anyakwo, Arthur, Pislaru, Crinela and Ball, Andrew (2012) A New Method for Modelling and Simulation of the Dynamic Behaviour of the Wheel-rail contact. International Journal of Automation and Computing, 9 (3). pp. 237-247. ISSN 1476-8186

Pislaru, Crinela, Lane, Mark, Ball, Andrew and Gu, Fengshou (2012) Fault Detection of Gearbox from Inverter Signals Using Advanced Signal Processing Techniques. Journal of Physics: Conference Series, 364. 012080. ISSN 1742-6596

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modelling and simulation of dynamic wheel-rail interaction using a roller rig. Journal of Physics: Conference Series, 364. 012060. ISSN 1742-6596

Ngigi, R. W., Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Modern techniques for condition monitoring of railway vehicle dynamics. Journal of Physics: Conference Series, 364. 012016. ISSN 1742-6596

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Fengshou, Gu (2011) Modelling the Dynamic Behaviour of the Wheel-Rail Interface by Using a Novel 3D Wheel-Rail Contact Model. In: 5th IET Conference on Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 29-30 November 2011, Derby Conference Centre, UK.

Appadoo, Robin, Ball, Andrew and Gu, Fengshou (2010) Optimizing condition monitoring techniques applied to a three stage reciprocating compressor in a FMCG industry. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, p. 185. ISBN 9781862180932

condition monitoring system

Condition Monitoring System: Vibration

Control algorithm

copper and iron losses

Ashari, Djoni, Pislaru, Crinela and Ball, Andrew (2012) Energy Optimisation of Sensorless Induction Motor Drives Using a Novel Robust-Adaptive Flux Simulator. In: The 2nd International Electric Drives Production Conference, 15th - 18th October 2012, Nuremberg, Germany. (Unpublished)

creep forces

Current signal analysis

Current Signature

Cylinder liner

Li, Guoxing, Gu, Fengshou, Wang, Tie, Zhang, Ruiliang and Ball, Andrew (2017) A Dynamic Deformation based Lubrication Model between the Piston Rings and Cylinder Liner. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601

cylinder pressure

Tesfa, Belachew, Mishra, Rakesh, Gu, Fengshou and Ball, Andrew (2012) Water Injection Effects on the Performance and Emission Characteristics of a CI Engine Operating with Biodiesel. Renewable Energy, 37 (1). pp. 333-344. ISSN 0960-1481

Data processing

Zhen, Dong, James, Gu, Tie, Wang, Fengshou, Gu and Ball, Andrew (2010) Diagnostic Feature Development based on Dynamic Time Warping of Dynamic Signals under Variable Machine Operating Condition. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK.

Density

Diagnosis

Dielectric property

Diesel Engine

Diesel Engine Valve clearance

Digital Signal Processing and Imaging

Drive Cycle

Alghadhi, Mosttafa, Ball, Andrew, Gu, Fengshou and Cattley, Robert (2013) Standard drive cycle recreation from general driving behaviour. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 100-105. ISBN 9781862181212

dynamic behaviour

Dynamic deformation

dynamic response

early failure

Raharjo, Parno, Al Thobiani, Faisal, Gu, Fengshou and Ball, Andrew (2010) Early Failure Detection and Diagnostics of High Speed Self Aligning Journal Bearing. In: COMADEM 2010, June 28-July 2 2010, Nara, Japan. (Unpublished)

early failure detection

Raharjo, Parno, Gu, J., Fan, Yibo, Gu, Fengshou and Ball, Andrew (2010) Early Failure Detection and Diagnostics of Self-Aligning Journal Bearing through Vibro-acoustic Analysis. In: CM 2010 and MFPT 2010 The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, England. (Unpublished)

Eccentric bore

Efficiency

Elasto-hydrodynamic lubrication

Brethee, Khaldoon F., Zhen, Dong, Gu, Fengshou and Ball, Andrew D. (2017) Helical gear wear monitoring: Modelling and experimental validation. Mechanism and Machine Theory, 117. pp. 210-229. ISSN 0094-114X

electrical drives

electrical energy

Wang, R., Gu, Fengshou and Ball, Andrew (2012) Energy recovery system optimisation in automotives. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, p. 161. ISBN 978-1-86218-106-9

electro-hydraulic system

Shi, John Z., Gu, Fengshou, Lennox, Barry and Ball, Andrew (2009) A Grey-box Modelling and Its Application in Model-based Fault Detection. International Journal of COMADEM, 12 (1). pp. 21-30. ISSN 1363-7681

Emission prediction

Tesfa, Belachew, Gu, Fengshou, Anyakwo, Arthur, Al Thobiani, Faisal and Ball, Andrew (2012) Prediction of metal pm emission in rail tracks for condition monitoring application. In: Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 5th IET Conference on. IET, London, pp. 1-6.

Empirical mode decomposition

Encoder

Arebi, Lufti, Gu, Fengshou and Ball, Andrew (2010) Rotor Misalignment Detection using a Wireless Sensor and a Shaft Encoder. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 6-13. ISBN 9781862180932

energy harvesting

energy efficient

energy recovery

Wang, Ruichen, Cattley, Robert, Tian, X., Gu, Fengshou and Ball, Andrew (2013) A Valid Model of a Regenerative Hybrid Shock Absorber System. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. University of Huddersfield, Huddersfield, pp. 206-211. ISBN 9781862181212

Ensemble average autocorrelation

Xu, Yuandong, van Vuuren, Pieter A., Tan, Xiaoli, Gu, Fengshou and Ball, Andrew (2017) A Robust Method to Detect Faults of Rolling Bearings Using Ensemble Average Autocorrelation Based Stochastic Subspace Identification. In: COMADEM 2017: 30th International Congress & Exhibition on Condition Monitoring and Diagnostic Engineering Management, Monday 10th - Thursday 13th July 2017, University of Central Lancashire, Preston. (Unpublished)

Envelop analysis

Envelope

Envelope analysis

Feng, Guojin, Zhao, H., Gu, Fengshou, Needham, Paul M. and Ball, Andrew (2017) Efficient implementation of envelope analysis on resources limited wireless sensor nodes for accurate bearing fault diagnosis. Measurement, 110. pp. 307-318. ISSN 0263-2241

Haba, Usama, Feng, Guojin, Shaeboub, Abdulkarim, Peng, Xinyu, Gu, Fengshou and Ball, Andrew (2016) Detection and Diagnosis of Compound Faults in a Reciprocating Compressor based on Motor Current Signatures. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China.

Envelope spectrum

Exhaust Acoustics

expert system

fatigue analysis

Fault detection

fault diagnosis

field-oriented control

Finite element

fluid/structure coupling system

FMCG industry

Friction force

Friction heat generation

Wang, Yanzhong, Tang, Wen, Chen, Yanyan, Wang, Tie, Li, Guoxing and Ball, Andrew (2017) Investigation into the meshing friction heat generation and transient thermal characteristics of spiral bevel gears. Applied Thermal Engineering, 119. pp. 245-253. ISSN 1359-4311

Fuel supply system

Fule Economy

fundamental frequency

Gear wear

Zhang, Ruiliang, Gu, Xi, Gu, Fengshou, Wang, Tie and Ball, Andrew (2017) Gear wear process monitoring using a sideband estimator based on modulation signal bispectrum. Applied Sciences, 7 (3). p. 274. ISSN 2076-3417

Zhang, Ruiliang, Gu, Fengshou, Mansaf, Haram, Wang, Tie and Ball, Andrew D. (2017) Gear wear monitoring by modulation signal bispectrum based on motor current signal analysis. Mechanical Systems and Signal Processing, 94. pp. 202-213. ISSN 08883270

Gearbox

Gearbox fault detection

Gearbox monitoring

grey-box model

Higher Order Statistics

Hilbert transform

IEEE802.15.4

In-Cylinder Pressure

In-Cylinder Temperature

Induction motor

Haba, Usama, Shaeboub, Abdulkarim, Mones, Zainab, Gu, Fengshou and Ball, Andrew (2017) Diagnosis of Compound Faults in Reciprocating Compressors Based on Modulation Signal Bispectrum of Current Signals. In: IncoME-II 2017, 5-6 September 2017, The University of Manchester. (Unpublished)

Shaeboub, Abdulkarim, Gu, Fengshou, Lane, Mark, Haba, Usama, Wu, Zhifei and Ball, Andrew (2017) Modulation signal bispectrum analysis of electric signals for the detection and diagnosis of compound faults in induction motors with sensorless drives. Systems Science & Control Engineering, 5 (1). pp. 252-267. ISSN 2164-2583

induction motors

Injector Fault

Instantaneous angular speed

Instantaneous Angular Speed (IAS)

integrated control

intelligent sensing

interference

Intrinsic time-scale decomposition

Inverter field operated controller (IFOC)

inverters

Kurtogram

Kurtosis

Link Quality Estimation

Hughes, Jack Bryan, Lazaridis, Pavlos, Glover, Ian and Ball, Andrew (2017) A Survey of Link Quality Properties Related to Transmission Power Control Protocols in Wireless Sensor Networks. In: 2017 23rd IEEE International Conference on Automation and Computing (ICAC). Institute of Electrical and Electronics Engineers Inc.. ISBN 9780701702618, 9780701702601

Link Quality Properties

Local processing

Lubricating oil

Mechanical seal

Mechanical seals

MENS accelerometer

Metal particle emission

microphone array

Zhen, Dong, Gu, Fengshou and Ball, Andrew (2010) The Study of Acoustic Source Localization using a Small Microphone Array for Condition Monitoring. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. University of Huddersfield, Huddersfield, pp. 14-19. ISBN 9781862180932

Minimum entropy deconvolution (MED)

Misalignment

Model Based Fault Detection Method

model-based approach

Modelling

Modelling simulation scale roller rig critical speed

Anyakwo, Arthur, Pislaru, Crinela, Ball, Andrew and Gu, Fengshou (2012) Dynamic simulation of a roller rig. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. University of Huddersfield, Huddersfield, pp. 51-56. ISBN 978-1-86218-106-9

Modulation signal bispectrum

Moisture

motor current and voltage signatures analysis

Motor current signal analysis

Motor Current Signature Analysis

Motor current signature analysis (MSCA)

Motor current signatures analysis

MSB

MSB analysis

multibody modelling

MUSIC Algorithm

neural networks

NOx emission

Numerical model

Oil film lubrication

On-rotor measurement

Online condition monitoring

Liu, Fulong, Gu, Fengshou, Zhao, Yunshi and Ball, Andrew (2016) A validation study of ACS-SSI for online condition monitoring of vehicle suspension systems. Vibroengineering Procedia, 10. pp. 369-375. ISSN 2345-0533

Open loop (OL)

Path loss

Hughes, Jack Bryan, Lazaridis, Pavlos, Glover, Ian and Ball, Andrew (2017) An Empirical Study of Link Quality Assessment in Wireless Sensor Networks applicable to Transmission Power Control Protocols. In: LAPC 2017, 13-13 November 2017, Loughborough, UK.

Piston ring

piston slap

Planetary gear

Planetary gearbox

Power factor

Power spectrum

predictive analysis techniques

predictive maintenance

pressure

Pulse width modulation (PWM)

Pump faults

Radio energy modelling

Hughes, Jack Bryan, Lazaridis, Pavlos, Glover, Ian and Ball, Andrew (2017) Opportunities for Transmission Power Control Protocols in Wireless Sensor Networks. Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). ISSN 9780701702601

rail vehicle dynamic simulations

rail vehicle dynamics

Rail vibration

railway applications

railway vehicle

Railway vehicle suspension

Railways

Random switching pattern

real time

reciprocating compressor

reflection and transmission characteristics

Reflection Suppression

Ride comfort

Hamed, M., Tesfa, Belachew, Fengshou, Gu and Ball, Andrew (2014) A study of the Suspension System for the Diagnosis of Dynamic Characteristics. In: Proceedings of the 20th International Conference on Automation and Computing (ICAC), 2014. ICAC (2014). IEEE, Cranfield, UK.