Items where Author is Jupp, Martyn

A

Al-Ani, Mahir, Carter, J. and Jupp, Martyn (2016) Comparison of electromagnetic performance and power losses of a high-speed machine fed by PWM and PAM inverter strategies. In: 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016). Institution of Engineering and Technology (IET), p. 6. ISBN 978-1-78561-188-9

Al-Ani, Mahir and Jupp, Martyn (2016) Switched flux permanent magnet machine with segmanted magnets. In: 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016). UNSPECIFIED, 5 -5. ISBN 978-1-78561-188-9

Allport, John and Jupp, Martyn (2012) Turbocharger blade vibration: Measurement and validation through laser tip-timing. In: 10th International Conference on Turbochargers and Turbocharging. Elsevier, London, UK, pp. 173-181. ISBN 978-0-85709-209-0

G

Goodland, J., Campean, I.F, Caunce, A., Victory, J.L. and Jupp, Martyn (2013) A Manufacturing Failure Mode Avoidance Framework for Aerospace Manufacturing. In: ASME 2013 International Mechanical Engineering Congress and Exposition, November 15–21, 2013, San Diego, California, USA.

J

Jupp, Martyn, Campean, I.F and Travcenko, J (2013) Application of TRIZ to develop an in-service diagnostic system for a synchronous belt transmission for automotive application. Procedia CIRP, 11. pp. 114-119. ISSN 2212-8271

L

Lee, Samuel Peter, Rezk, Ahmed, Jupp, Martyn and Nickson, Keith (2018) The influence of pulse shape on the performance of a mixed flow turbine for turbocharger applications. International Journal of Mechanical Engineering and Robotics Research, 7 (2). ISSN 2278-0149

Lee, Samuel, Barrans, Simon, Jupp, Martyn and Nickson, Ambrose (2017) The Impact of Volute Aspect Ratio on the Performance of a Mixed Flow Turbine. Aerospace, 4 (4). p. 56. ISSN 2226-4310

Lee, Samuel Peter, Jupp, Martyn, Nickson, Keith and Allport, John (2017) Analysis of a tilted turbine housing volute design under pulsating inlet conditions. In: ASME Turbo Expo: Turbomachinery Technical Conference & Exposition, 26-30 June 2017, Charlotte, North Carolina, USA.

Lee, Samuel Peter, Jupp, Martyn and Nickson, Ambrose (2016) The influence of secondary flow structures in a turbocharger turbine housing in steady state and pulsating flow conditions. In: 2016 7th International Conference on Mechanical and Aerospace Engineering (ICMAE). IEEE, pp. 154-159. ISBN 978-1467388290

Lee, Samuel Peter, Jupp, Martyn and Nickson, Ambrose (2016) The introduction of a tilted volute design for operation with a mixed flow turbine for turbocharger applications. In: 2016 7th International Conference on Mechanical and Aerospace Engineering (ICMAE). IEEE, pp. 165-170. ISBN 978-1467388290

R

Rezk, Ahmed, Carter, Jeff, Jupp, Martyn, Nickson, Keith and Allport, John (2016) Investigation of an electrically assisted turbocharger with energy recovery for a heavy duty diesel engine. In: The 12th International Conference on Turbochargers and Turbocharging. Institution of Mechanical Engineers, London, pp. 319-330. ISBN 978-0-9572374-7-6

S

Sharma, Sidharath, Jupp, Martyn, Barrans, Simon and Nickson, Keith (2017) The impact of housing features relative location on a turbocharger compressor flow. International Journal of Mechanical Engineering and Robotics Research, 6 (6). pp. 451-457. ISSN 2278-0149

Sharma, Sidharath, Jupp, Martyn, Nickson, Ambrose and Allport, John (2017) Ported shroud flow processes and their effect on turbocharger compressor operation. In: ASME Turbo Expo: Turbomachinery Technical Conference & Exposition, 26-30 June 2017, Charlotte, North Carolina, USA.