Search:
Computing and Library Services - delivering an inspiring information environment

NOx Prediction Based on Cylinder Pressure Measurement for Engine Emission Monitoring

Tesfa, Belachew, Mishra, Rakesh, Zhang, Cuiping, Gu, Fengshou and Ball, Andrew (2011) NOx Prediction Based on Cylinder Pressure Measurement for Engine Emission Monitoring. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management. COMADEM, Norway, p. 212. ISBN 0954130723

[img]
Preview
PDF - Accepted Version
Download (474kB) | Preview

    Abstract

    Meeting European NOx emission standards is one of the biggest challenges facing automotive industries. The available technologies to measure NOx emission are dependent on measurement of different NOx species. In addition, in most cases it requires conversion of other NOx species to NO for measurement purposes. The ability to measure NOx emission on-line during the transient engine operation may be very difficult due to the delay in reaction time in the NOx measuring apparatus. NOx emissions in compression ignition (CI) engines are largely a thermal phenomena thus cylinder pressure is key to making accurate predictions of NOx. If cylinder pressure data is available the heat release during combustion can be modeled and thus NOx emission can be more accurately simulated. Therefore, the main objective of this study is to investigate the performance of the cylinder pressure in predicting the NOx emission from a CI engine running with biodiesel during both steady and transient operations. To address the problem experimental work has been conducted on a four-cylinder, four-stroke, direct injection (DI) and turbocharged diesel engine. In this investigation, biodiesel (produced from the rapeseed oil by transesterfication process) has been used. During the experiment the in-cylinder pressure, TDC mark, fuel flow rate, air flow rate and the NOx emission were measured. The temperature within the cylinder was predicted using the cylinder pressure. Using the temperature values the NOx emission was simulated in Zeldovich extended mechanism. The measured and simulation results of NOx emission were compared during steady state conditions and shows maximum error of 4.5%.
    Keywords : NOx emission, In-Cylinder Pressure, In-Cylinder Temperature, Biodiesel

    Item Type: Book Chapter
    Uncontrolled Keywords: NOx emission, In-Cylinder Pressure, In-Cylinder Temperature, Biodiesel
    Subjects: T Technology > TJ Mechanical engineering and machinery
    Schools: School of Computing and Engineering
    School of Computing and Engineering > Automotive Engineering Research Group
    School of Computing and Engineering > Diagnostic Engineering Research Centre > Energy, Emissions and the Environment Research Group
    School of Computing and Engineering > Diagnostic Engineering Research Centre > Machinery Condition and Performance Monitoring Research Group
    School of Computing and Engineering > Diagnostic Engineering Research Centre > Measurement System and Signal Processing Research Group
    Related URLs:
    Depositing User: Belachew Tesfa
    Date Deposited: 01 Mar 2011 12:44
    Last Modified: 23 Jun 2011 11:56
    URI: http://eprints.hud.ac.uk/id/eprint/9675

    Document Downloads

    Downloader Countries

    More statistics for this item...

    Item control for Repository Staff only:

    View Item

    University of Huddersfield, Queensgate, Huddersfield, HD1 3DH Copyright and Disclaimer All rights reserved ©