Search:
Computing and Library Services - delivering an inspiring information environment

An Investigation into W or Nb or ZnFe2O4 Doped Titania Nanocomposites Deposited from Blended Powder Targets for UV/Visible Photocatalysis

Farahani, Nick, Kelly, Peter, West, Glen, Ratova, Marina, Hill, Claire and Vishnyakov, Vladimir (2013) An Investigation into W or Nb or ZnFe2O4 Doped Titania Nanocomposites Deposited from Blended Powder Targets for UV/Visible Photocatalysis. Coatings, 3 (3). pp. 153-165. ISSN 2079-6412

Metadata only available from this repository.

Abstract

The photocatalytic behavior of titania coatings is largely determined by their crystalline structure. Depending on deposition conditions, though, titania may form amorphous, brookite, anatase or rutile structures, with anatase or anatase/rutile mixed phase structures showing the highest levels of activity. Anatase is activated by UV light and, consequently, there is a great deal of interest in doping titania films to both increase activity and extend it into the visible range. In this study, titania and doped titania coatings have been deposited from blended oxide powder targets. This highly versatile and economical technique allows dopant levels to be readily varied. Using this technique, titania coatings doped with W, Nb and ZnFe2O4 have been deposited onto glass substrates by pulsed magnetron sputtering. The as-deposited coatings were analyzed by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and micro-Raman spectroscopy. Selected coatings were then annealed at temperatures in the range of 400–700 °C and re-analyzed. Structural transformation of the titania coatings was initiated in the 500–600 °C range, with the coatings annealed at 700 °C having predominantly anatase structures. The photocatalytic activity of the coatings was assessed through measurements of the degradation of organic dyes, such as methyl orange, under the influence of UV and fluorescent light sources. It was found that, after annealing, coatings with photo-active surfaces were produced and that activity varied with dopant content. Activity levels under fluorescent light irradiation were up to 60% of the activity measured under UV irradiation.

Item Type: Article
Uncontrolled Keywords: magnetron sputtering; powder targets; photocatalytic coatings; Raman spectroscopy; methyl orange
Subjects: Q Science > Q Science (General)
T Technology > T Technology (General)
Schools: School of Computing and Engineering
School of Computing and Engineering > Electron Microscopy and Materials Analysis
Depositing User: Sharon Beastall
Date Deposited: 09 Oct 2014 11:35
Last Modified: 09 Oct 2014 12:34
URI: http://eprints.hud.ac.uk/id/eprint/21985

Downloads

Downloads per month over past year

Repository Staff Only: item control page

View Item View Item

University of Huddersfield, Queensgate, Huddersfield, HD1 3DH Copyright and Disclaimer All rights reserved ©