J. Lemaitre, J.L. Chaboche, Mechanics of Solid Materials, Cambridge University Press, 1st ed. Cambridge, 1994.
 D. Liu, Q. Xu, Z. Lu, D. Xu, The review of computational FE software for creep damage mechanics, Advanced Materials Research 510 (2012) 495-499.
 D. Liu, Q. Xu, D. Xu, Z. Lu, F. Tan, The validation of computational FE software for creep damage mechanics, Advanced Materials Research 744 (2013) 205-210..
 A.A. Becker, T.H. Hyde, W. Sun, P. Andersson, Benchmarks for finite element analysis of creep continuum damage mechanics, Computational Materials Science 25 (2002) 34-41.
 D.R. Hayhurst, A.J. Krzeczkowski, Numerical solution of creep problems, Comput. Methods App. Mech. Eng 20 (1979) 151-171.
 X. Ling, S.T. Tu and J.M. Gong, Application of Runge-Kutta-Merson algorithm for creep damage analysis, International Journal of Pressure Vessels and Piping 77 (2000) 243-248.
 Q. Xu, Creep damage constitutive equations for multi-axial states of stress for 0.5Cr0.5Mo0.25V ferritic steel at 590°C, Theoretical and Applied Fracture Mechanics 36 (2001) 99-107.
 L. An, Q. Xu, D. Xu, Z. Lu, Review on the Current State of Developing of Advanced Creep Damage Constitutive Equations for High Chromium Alloy, Advanced Materials Research 510 (2012) 776-780.
 Q.H. Xu, Q. Xu, Y.X. Pan, M. Short, Current state of developing creep damage constitutive equation for 0.5Cr0.5Mo0.25V ferritic steel, Advanced Materials Research 510 (2012) 812-816.
 Y. Tao, Y. Masataka, H.J. Shi, Numerical investigation on the creep damage induced by void growth in heat affected zone of weldments, International Journal of Pressure Vessels and Piping 86 (2009) 578-584.
 R. Mustata, R.J. Hayhurst, D.R. Hayhurst, F. Vakili-Tahami, CDM predictions of creep damage initiation and growth in ferritic steel weldments in a medium-bore branched pipe under constant pressure at 590°C using a four-material weld model, Arch Appl Mech 75 (2006) 475-495.
 M.S. Herrn, G. Yevgen, Development of a creep-damage model for non-isothermal long-term strength analysis of high-temperature components operating in a wide stress range, ULB Sachsen-Anhalt, 2008.
 A. Holm, N. Konstantin, G. Yevgen, Numerical benchmarks for creep-damage modelling, Proceeding in Applied Mathematics and Mechanics, 2008.
 H. Altenbach, G. Kolarow, O.K. Morachkovsky, K. Naumenko, On the accuracy of creep-damage predictions in thinwalled structures using the finite element method, Computational Mechanics 25 (2000) 87-98.
 M. Klasztorny, A. Bondyra, P. Szurgott, D. Nycz, Numerical modelling of GFRP laminates with MSC.Marc system and experimental validation”, Computational Materials Science 64 (2012) 151-156.
 H.C. Li, C.A. Tang, T.H. Ma, X.D. Zhao, Research on the closure and creep mechanism of circular tunnels, Journal of Coal Science and Engineering 14 (2008) 195-199.
 M.T. Wong, Three-Dimensional Finite Element Analysis of Creep Continuum Damage Growth and Failure in Weldments, PHD thesis, University of Manchester, UK, 1999.
 D.R. Hayhurst, R.J. Hayhurst, F. Vakili-Tahami, Continuum damage mechanics predictions of creep damage initiation and growth in ferritic steel weldments in a medium-bore branched pipe under constant pressure at 590°C using a five-material weld model, PROC. R. SOC. A 461 (2005) 2303-2326.
 R.J. Hayhurst, F. Vakili-Tahami, D.R. Hayhurst, Verification of 3-D parallel CDM software for the analysis of creep failure in the HAZ region of Cr-Mo-V crosswelds, International Journal of Pressure Vessels and Piping 86 (2009) 475-485.
 K. Naumenko, H. Altenbach, Modeling of Creep for Structural Analysis, Springer Berlin Heidelberg New York, 2004, pp. 1612-1384.
 F. Dunne, J. Lin, D.R. Hayhurst, J. Makin, Modelling creep, ratchetting and failure in structural components subjected to thermo-mechanical loading, Journal of Theoretical and Applied Mechanics 44 (2006) 87-98.
 F.A. Leckie, D.R. Hayhurst, Constitutive equations for creep rupture, Acta Metallurgical 25 (1977) 1059-1070.
 D.R. Hayhurst, P.R. Dimmer, G.J. Morrison, Development of continuum damage in the creep rupture of notched bars, Trans R Soc London A 311 (1984) 103-129.
 I.J. Perrin, D.R. Hayhurst, Creep constitutive equations for a 0.5Cr–0.5Mo–0.25V ferritic steel in the temperature range 600–675°C, J. Strain Anal. Eng 31 (1996) 299-314.
 F. Tan, Q. Xu, Z. Lu, D. Xu, The preliminary development of computational software system for creep damage analysis in weldment, Proceedings of the 18th International Conference on Automation & Computing, 2012.
 The NAG Fortran Library, Mark 23, The Numerical Algorithms Group Ltd, Oxford, UK.
 I.M. Smith, D.V. Griffiths, Programming the Finite Element Method, John Wiley & Sons Ltd., 4th ed. Sussex, 2004.
 Q. Xu, M. Wright, Q.H., Xu, The development and validation of multi-axial creep damage constitutive equations for P91, ICAC'11: The 17th international conference on automation and computing, 2011.
 F. Tan, Q. Xu., Z. Lu, D. Xu, D. Liu, Practical guidance on the application of R-K-integration method in finite element analysis of creep damage, The 2013 World Congress in Computer Science, Computer Engineering, and Applied Computing, 2013.
 D. Liu, Q. Xu, Z. Lu, D. Xu, Q.H. Xu, The techniques in developing finite element software for creep damage analysis, Advanced Materials Research 744 (2013) 199-204.