Sinha, Pammi, Dissanayake, D. G. K., Hussey, Clare, J. and Bartlett, Caroline (2009) Recycled Fashion. In: Taking up the Global Challenge: 15th Annual International Sustainable Sustainable Development Research Conference, 5-9 July, 2009, Utrecht University, the Nethelands. (Unpublished)
- Accepted Version
Globally, the textiles industry is worth over $1 trillion, ranked the second biggest global economic activity for intensity of trade, and employs approximately 26 million people. Moreover, it contributes to 7% of world exports, supporting a number of developing, small and industrialised economies as well as individual incomes around the world. The fastest growing sector in household waste is Textiles. Over the last ten years, discounting and low retail prices in the UK have led to 60% increase in sales of clothing, with a resultant 90% rise in textile waste from the consumer. Between 2-3% of UK municipal solid waste contains textiles and shoes. In the UK, it is estimated that consumption of textiles is now 24.16m tonnes, on average 35kg per capita, producing around 3.1 million tonnes of CO2, 2 million tonnes of waste and 70 million tonnes of waste water per year - with 1.5 million tonnes of unwanted clothing ultimately ending up in landfill with the associated methane and greenhouse gas emissions (DEFRA 2006, Madsen et al 2007, University of Cambridge, 2006). The UK government, through DEFRA, took action to “identify, understand and address sustainability impacts from products, services and materials consumed and used in the UK” (DEFRA 2008b). They have set out to examine ten product areas with high negative impact on the environment; textiles/clothing is one. We present findings from research conducted for the Centre for Remanufacturing and Reuse on end of life (EoL) management of corporate wear as part of a project funding for the Clothing Roadmap scheme, to be presented to the Government. Site visits and interviews were conducted with a textile recycler in London and a corporation providing corporate wear to examine and understand their End of Life management approaches. Some of the issues raised were: the daily shipment of some 22500 kg of clothing overseas, the seasonal nature of the clothing disposal, the detailed market knowledge required for effective reuse, the necessity for customer relationships and the need for clear government policies to support and regulate the legitimate collection and use of waste. This research aims to explore remanufacturing opportunities for the industry at the end of the lifecycle of clothing. From literature review conducted, reuse of clothing causes the least impact on energy use and appears to be the most environmentally and socially friendly approach to sustainability efforts (Madsen et al, 2007). Remanufacture of clothing is currently practiced but at niche market levels, for it to have a broader impact, it needs to gain entry into the mass-market retail arena. Our goal is to understand how designers, manufacturers and retailers may work together in a remanufacturing process and to propose a new product development method for sustainable consumption of fashion. We, therefore end the paper by reflecting on implications for the potential mechanisms of the supply chain integration and how the large multinationals may become engaged.
Keywords: textile recycling process, fashion value chain, reuse and remanufacture, socio-economic development.▼ Jump to Download Statistics
|Item Type:||Conference or Workshop Item (Paper)|
|Subjects:||T Technology > TS Manufactures|
|Schools:||School of Art, Design and Architecture|
AEON, (2004), “New Interface between the Sales Front and Social Contributions”, ÆON Environmental and Social Report 2004, p.22. http://www.aeon.info/en/environment/report/2004.html
Appelbaum, R.P. and Gary Gereffi, 1994, “Power and profits in the apparel commodity chain”, in Edna Bonacich et al. (eds), Global Production: the Apparel Industry in the Pacific Rim (Philadelphia, PA, Temple University Press,), pp. 42-64.
Ayres, R., Ferrer, G. and Leynseele, T.V. (1997), “Eco-Efficiency, Asset Recovery and Remanufacturing”, European Management Journal, 15, 5, pp. 557-574, Elsevier Science Ltd
Baden, S. and Barber, C. (2005), The impact of the second hand clothing trade on developing economies, Oxfam
Bin Akasah, Z., A. and Bin Amirudin, R. (2006), “Maintenance management process model for school buildings: an application of IDEF0 modelling methodology”, The International Conference on Construction Industry, Universitas Bung Hatta. Padang. INDONESIA.
Birtwistle, G. and Moore C.M. (2007), “Fashion clothing – where does it all end up?” International Journal of Retail & Distribution Management. 35(3):210-216.
Brill, B. (1997). Council for Textile Recycling. Bethesda, MD: Council for Textile Recycling. Council for Textile Recycling (1997). http://textilerecycle.org.
Burns, L. D. and Bryant, N., (2001),The Business of Fashion 2nd Edition: Designing, Manufacturing, and Marketing, Fairchild Books.
Claudio, L. (2007), “Waste Couture: Environmental Impact of the Clothing Industry”, Environmental Health Perspectives, 115 (9), 448-454, September.
CIWM (2009), “Waste explained: what is waste?” http://www.ciwm.co.uk/pma/1384
Cuc, S. Tripa, S. (2008), “Using the Global Value Chain Approaches in the Clothing Industries”, Annals of the Oradea University, Fascicle of Management and Technological Engineering, VII (XVII), 2086-2090, Publishing House of Oradea University.
DEFRA (2006) Recycling of Low Grade Clothing Waste Conducted by Oakdene Hollins Ltd, the Salvation Army Trading Company Ltd and Nonwovens Innovation & Research Institute Ltd.
DEFRA (2008a), Revised Waste Framework Directive (2008/98/EC), Transposition / Implementation, (http://www.defra.gov.uk/ENVIRONMENT/waste/thematicstrat/revised-wfd-transposition-implementation-dates.pdf).
DEFRA (2008b), “Product roadmaps – Clothing”, November 2008. www.defra.gov.uk/environment/consumerprod/products/clothing.htm
Dupin, C. (2003). The shirt off our backs, Journal of Commerce, http://www.accessmylibrary.com/coms2/summary_0286-7971787_ITM
Ecocircle (2009) “ Companies/organizations who wish to participate in ECO CIRCLE”, http://www.ecocircle.jp/en/for_kigyou.html
EPA (Environmental Protection Agency) (1998), Environmental Labelling, Issues, Policies, and Practices Worldwide, Pollution Prevention Division Office of Pollution, Prevention and Toxics, USA.
Field, S. (2000) The Internationalisation of the Second-Hand Clothing Trade: The Case of Zimbabwe. Unpublished PhD Thesis, African Studies Centre, Coventry University: UK.
Field, S. and Schmidt, H. (2007) “Who Benefits From the Second-Hand Clothing Trade? The Case of Kenya: Full Research Report”, ESRC End of Award Report, RES-000-22-0617. Swindon: ESRC
Forum for the Future and Marks and Spencer (2007) Fashioning Sustainability: A review of the sustainability impacts of the clothing industry, UK.
Gereffi, G., Humphrey, J., Kaplinsky, R. and Sturgeon, T. J. (2001) in ‘The Value of Value Chains: Spreading the Gains from Globalisation’ edited by Gary Gereffi and Raphael Kaplinsky, IDS Bulletin 32.3, Institute of Development Studies.
Hawley J.M. (2004), Systems Analysis of Textile Recycling, The Ninth Annual Conference on Recycling of Fibrous Textile and Carpet Waste, North West Georgia Trade & Convention Center, Dalton, Georgia, May 10-11,2004, http://www.ptfe.gatech.edu/recycle_conf
Hawley, J., M., (2006) “Digging for Diamonds: A Conceptual Framework for Understanding Reclaimed Textile Products”, Clothing and Textiles Research Journal, 24; 262, http://ctr.sagepub.com
Jones, S., J., (2005) Fashion Design: Portfolio Series, Lawrence King.
Madsen, Jacob, Hartlin, Bryan, Perumalpillai, Shahila, Selby, Sarah and Aumônier, Simon. (2007). Mapping of Evidence on Sustainable Development Impacts that Occur in Life Cycles of Clothing: A Report to the Department for Environment, Food and Rural Affairs. Environmental Resources Management (ERM) Ltd. Defra, London.
McCormick, D. and Schmitz, H. (2002), Manual for Value Chain Research on Homeworkers in the Garment Industry, Institute of Development Studies, Universities of Sussex, Brighton, www.ids.ac.uk/ids/global/wiego.html
McKelvey, K. and Munslow J. (2008) Fashion Design: Process, Innovation and Practice, Blackwell Science Ltd
Mhango, M., W., and Niehm, L., S. (2005), “The second-hand clothing distribution channel: Opportunities for retail entrepreneurs in Malawi”, Journal of Fashion Marketing and Management, Volume 9 Number 3 2005 pp. 342-356, Emerald Group Publishing Limited
Mero, R. and Ndongsok, D. (2008) Clean Development Mechanism as Tool for Sustainable Development: Case Study of Tanzania, Geneva Trade and Development Forum, Regent Congress Centre, Crans-Montana, Switzerland, 17 – 20 September, http://www.gtdforum.org/download/Case%20Study%20Tanzania.pdf
Nasr, N and Thurston, M. (2006). Remanufacturing: A Key Enabler to Sustainable Product Systems. Rochester Institute of Technology.
Nike Environment Responsibility, 2004, October, http://www.nike.com/nikebiz/nikebiz.jhtml
Parlikad, A. and McFarlane, D. (2004), Product Lifecycle Management, Centre for Distributed Automation and Control Evening Workshop, 19th May, Institute for Manufacturing, University of Cambridge, UK. http://www.ifm.eng.cam.ac.uk/automation/presentations/
Patagonia, (2009), “Environmentalism: What We Do” http://www.patagonia.com/web/us/
Porter, M.E., (1980), Competitive Strategy: techniques for analysing industries and competitors, Free Press (Macmillan Publishing Company Inc.), New York.
Rivoli, P. (2005), The Travels of T-Shirt in the Global Economy: an economist examines the markets, power and politics of world trade, John Wiley and Sons, Inc., New Jersey.
Rubik, F. and Frankl, P., editors, (2005), The Future of Eco-Labelling; making environmental information systems effective, Greenleaf Publishing, Sheffield.
Sameer Kumar, P. Malegeant (2006) Strategic alliance in a closed-loop supply chain, a case of manufacturer and eco-non-profit organization, Technovation, 26, 1127–1135, Elsevier
Seitz, M., A. and Wells, P., E. (2006) “Challenging the implementation of corporate sustainability: The case of automotive engine remanufacturing” Business Process Management Journal, 12, 6, pp. 822-836, Emerald Group Publishing Limited
Seuring, S. and Müller, M. (2008), “Core Issues in Sustainable Supply Chain Management – a Delphi Study”, Business Strategy and the Environment, 17, 455–466, Wiley InterScience.
Sinha, P. (2000), A Comparative study of fashion design processes in the UK women’s wear industry, PhD thesis, Institute of Social Research, University of Salford
Sinha, P. (2007) “Design Capabilities” in The Cotton and Textiles Sector in Tanzania: Issues and Opportunities, a Report to the Government of Tanzania, Annex D, supported by the Tanzania Gatsby Trust and the Gatsby Charitable Foundation, Stakeholder’s Workshop, September 17th, Kilimanjaro Hotel, Dar es Salaam.
Sinha, P. and Hussey, C. (2009), “Product Labelling for Improved End-of-Life Management: An investigation to determine the feasibility of garment labelling to enable better end-of-life management of corporate clothing”, Centre for Remanufacturing and Reuse, Oakdene Hollins, DEFRA Clothing Roadmap Study, http://www.uniformreuse.co.uk/futureindex.html
Stecker, P., (1996), The Fashion Design Manual, Macmillan Education, Australia
Sundin, Erik. (2004). Product and Process Design for Successful Remanufacturing. PhD Dissertation, Linköping’s University
Tukker, Huppes, Guinée, Heijungs, de Koning, van Oers, Suh, Geerken, Van Holderbeke, Jansen, and Nielsen (2006), Environmental Impact of Products (EIPRO): Analysis of the life cycle environmental impacts related to the final consumption of the EU-25, Technical Report EUR 22284 EN, European Commission.
University of Cambridge Institute for Manufacturing, (2006) Well dressed? The present and future sustainability of clothing and textiles in the United Kingdom, University of Cambridge
United Republic of Tanzania (2003) Initial National Communication Under the United Nations Framework Convention on Climate Change (UNFCCC), Vice President’s Office, http://unfccc.int/resource/docs/natc/tannc1.pdf
Woolridge, A. C., Ward, G. D., Phillips, P. S., Collins, M. and Gandy S. (2006), “Life cycle assessment for reuse/recycling of donated waste textiles compared to use of virgin material: An UK energy saving perspective”, Resources, Conservation and Recycling, 46, 94–103, Elsevier
Yang, G., Wang, Z. and Li, X. (2009) “The optimization of the closed-loop supply chain network”, Transportation Research Part E 45 (2009) 16–28, Elsevier.
|Depositing User:||Pammi Sinha|
|Date Deposited:||22 Apr 2013 15:26|
|Last Modified:||04 Nov 2015 22:31|
Downloads per month over past year
Repository Staff Only: item control page