Search:
Computing and Library Services - delivering an inspiring information environment

Five-Axis Machine Tool Condition Monitoring Using dSPACE Real-Time System

Sztendel, S., Pislaru, Crinela, Longstaff, Andrew P., Fletcher, Simon and Myers, Alan (2012) Five-Axis Machine Tool Condition Monitoring Using dSPACE Real-Time System. Journal of Physics: Conference Series, 364. 012091. ISSN 1742-6596

[img]
Preview
PDF - Accepted Version
Download (253kB) | Preview

    Abstract

    This paper presents the design, development and SIMULINK implementation of the lumped parameter model of C-axis drive from GEISS five-axis CNC machine tool. The simulated results compare well with the experimental data measured from the actual machine. Also the paper describes the steps for data acquisition using ControlDesk and hardware-in-the-loop implementation of the drive models in dSPACE real-time system. The main components of the HIL system are: the drive model simulation and input – output (I/O) modules for receiving the real controller outputs. The paper explains how the experimental data obtained from the data acquisition process using dSPACE real-time system can be used for the development of machine tool diagnosis and prognosis systems that facilitate the improvement of maintenance activities.

    ▼ Jump to Download Statistics
    Item Type: Article
    Uncontrolled Keywords: model-based condition monitoring; CNC machine tool feed drive; real-time systems; machine dynamic behaviour; modelling and simulation
    Subjects: T Technology > T Technology (General)
    T Technology > TJ Mechanical engineering and machinery
    T Technology > TS Manufactures
    Schools: School of Computing and Engineering
    School of Computing and Engineering > Centre for Precision Technologies > EPSRC Centre for Innovative Manufacturing in Advanced Metrology
    Related URLs:
    References:

    [1] Altintas Y 2011 Manufacturing Automation: Metal Cutting Mechanics, Machine Tool
    Vibrations, and CNC Design (Cambridge: Cambridge University Press)
    [2] Maj R, Modica F, Bianchi G 2006 Machine Tools - Mechatronic Analysis. Proc. IMechE, Part
    B 220 345-353
    [3] Yeung CH, Altintas Y, Erkorkmaz K 2006 Virtual CNC System - Part I: System Architecture
    Int. J Mach Tools and Manuf 46 1107-1123.
    [4] Chen YC, Tlusty J 1995 Effect of low-friction guideways and lead-screw flexibility on
    dynamics of high-speed machines CIRP Annals 44 353–356.
    [5] Erkorkmaz K, Altintas Y 2001 High speed CNC system design. Part III. High speed tracking
    and contouring control of feed drives, Int J Mach Tools and Manuf 41 1637–1658.
    [6] Armstrong HB, Dupont P, Canudas De Wit C 1994 A survey of models, analysis tools and
    compensation methods for the control of machines with friction Automatica 1083–1138.
    [7] Erkorkmaz K, Altintas Y 2001 High speed CNC system design. Part II. Modeling and
    identification of feed drives, Int J Mach Tools and Manuf 41 1487–1509.
    [8] Pislaru C, Ford DG, Freeman JM 1999 A New Approach to the Modelling and Simulation of a
    CNC Machine Tool Axis Drive, Proc. Int. Conf. LAMDAMAP’ 99 vol 1 pp. 335-343.
    [9] Pislaru C, Ford DG, Freeman JM 1999 Dynamic Simulation of CNC Machine Tool Axis Drives,
    Proc. of Int. Conf. PCIM ' 99 pp. 259 -264 .
    [10] Pislaru C, Ford DG, Holroyd G 2004, Hybrid Modelling and Simulation of a CNC Machine
    Tool Axis Drive, Proc IMechE Part I2 218 111-120.
    [11] Holroyd G, Pislaru C, Ford DG 2003 Determination of Stiffness and Damping Sensitivity for CNC Machine Tool Drives. Proc. IMechE C 217 1165–1177.
    [12] Moreno-Castaneda VY, Pislaru C, Freeman JM, Ford DG 2003 Modelling and Simulation of a
    Feed Drive Using the Transmission Line Modelling Technique, Proc. Int Conf LAMDAMAP 2003, pp. 193-204.
    [13] Pislaru C, Moreno-Castaneda VY, Ford DG 2004 Dynamic Model of a Non-linear Servo
    Control System Using Transmission Line Modelling Technique. Proc. Int Conf CONTROL 2004, pp 65–70.
    [14] Pislaru C., Ford DG., Moreno-Castaneda VY, Myers A 2005 Modelling and Simulation of CNC
    Machine Tool Feed Drives. Proc. LAMDAMAP 2005, pp. 220-229.
    [15] Pislaru C, Ford DG, Myers A 2006 Methods for Modelling and Simulating the Dynamic
    Behaviour of CNC Machine Tool Feed Drives. Proc. EUSPEN 2006, pp.147-150.
    [16] Moreno-Castaneda VY, Pislaru C., Ford DG., Longstaff AP., Myers A. 2005 Modelling and
    Simulation of the Dynamic Behaviour of a Ball-screw System Using Transmission Line
    Modelling Technique. Proc. LAMDAMAP 2005, pp 210-219.
    [17] Pislaru C, Ford, DG, Sztendel S, Myers A 2009 Optimisation of Real-Time Implementation for
    High Speed Drives Models. Proc. Int Conf LAMDAMAP 2009, Brunel, pp. 138-146.
    [18] Sztendel S, Pislaru C, Poxton A, Ford DG, Myers, A 2009 Developing Mechatronic Models Of
    Modern CNC Machine Tools For Real-Time Implementation. Proc. LAMDAMAP, 147-155.
    [19] Dougal R, Monti A, 2000 High level virtual prototyping with hardware in the loop, IEEE VIMS00, Annapolis
    [20] Baracos P, Murere G., Jin W 2001 Enabling pc-based HIL simulation for automotive applications, IEEE Elec Mach Drives Conf 2001, pp. 721 -729.
    [21] Zirn O, Nowak J, Hiller B 2007 Dynamic coupling force compensation for direct-driven machine tools. IEEE Ind. Applications Society Annual Meeting, New Orleans
    [22] Jędrzejewski, J., Kwaśny, W 1996 Artificial Intelligence Tools in Diagnostics of Machine Tool
    Drives, CIRP Annals – Manufacturing Technology Part I1 45 411-414.
    [23] Tobon-Mejia, D.A, Medjaher, K., Zerhouni, N 2012 CNC machine tool's wear diagnostic and
    prognostic by using dynamic Bayesian networks, Mechanical Systems and Signal Processing,
    28 167-18

    Depositing User: Crinela Pislaru
    Date Deposited: 14 Jun 2012 16:18
    Last Modified: 18 Jun 2013 15:00
    URI: http://eprints.hud.ac.uk/id/eprint/13911

    Document Downloads

    Downloader Countries

    More statistics for this item...

    Item control for Repository Staff only:

    View Item

    University of Huddersfield, Queensgate, Huddersfield, HD1 3DH Copyright and Disclaimer All rights reserved ©