Blunt, Liam, Armstrong, J. and Blunt, R. (2005) The use of advanced 3D surface metrology for the characterisation of epi-wafers and Si structures. Physica Status Solidi (c), 2 (4). pp. 1251-1258. ISSN 1610-1634
Abstract

Over recent years the discipline of surface metrology has advanced greatly both in terms of instrumentation and in terms of techniques for surface characterisation. The advances in instrumentation have entailed the introduction, as an industrial tool, of the atomic force microscope and the widespread use of optical interferometry. Both of these techniques have allowed visualisation of the 3D surface texture of epi-wafers at the micro and nanometer scale. The clear advantage of interferometry is that it is contactless and fast whereas the AFM technique, although it has a better measurement resolution, is still contacting the surface even in tapping mode and could potentially damage or contaminate the surface. A drawback common to both of these instrument types is that despite the richness of the data collected it is usually only the average roughness Ra, root mean square roughness Rq or maximum peak to valley roughness Rt, values of the surface texture that are quoted. True surface areal texture information cannot be described by such parameters. Consequently these simple amplitude based roughness parameters are inadequate for describing anything more than very simple epi-structures and as a result differing textures can often yield similar roughness values. This paper outlines the recent advances in 3D surface characterisation and applies this to epi-wafer surface topography. (© 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

Library
Statistics
Add to AnyAdd to TwitterAdd to FacebookAdd to LinkedinAdd to PinterestAdd to Email